diff options
Diffstat (limited to 'ldap/libraries')
-rw-r--r-- | ldap/libraries/Makefile | 396 | ||||
-rw-r--r-- | ldap/libraries/libavl/Makefile | 80 |
2 files changed, 0 insertions, 476 deletions
diff --git a/ldap/libraries/Makefile b/ldap/libraries/Makefile deleted file mode 100644 index 2b312baa..00000000 --- a/ldap/libraries/Makefile +++ /dev/null @@ -1,396 +0,0 @@ -# -# BEGIN COPYRIGHT BLOCK -# This Program is free software; you can redistribute it and/or modify it under -# the terms of the GNU General Public License as published by the Free Software -# Foundation; version 2 of the License. -# -# This Program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License along with -# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple -# Place, Suite 330, Boston, MA 02111-1307 USA. -# -# In addition, as a special exception, Red Hat, Inc. gives You the additional -# right to link the code of this Program with code not covered under the GNU -# General Public License ("Non-GPL Code") and to distribute linked combinations -# including the two, subject to the limitations in this paragraph. Non-GPL Code -# permitted under this exception must only link to the code of this Program -# through those well defined interfaces identified in the file named EXCEPTION -# found in the source code files (the "Approved Interfaces"). The files of -# Non-GPL Code may instantiate templates or use macros or inline functions from -# the Approved Interfaces without causing the resulting work to be covered by -# the GNU General Public License. Only Red Hat, Inc. may make changes or -# additions to the list of Approved Interfaces. You must obey the GNU General -# Public License in all respects for all of the Program code and other code used -# in conjunction with the Program except the Non-GPL Code covered by this -# exception. If you modify this file, you may extend this exception to your -# version of the file, but you are not obligated to do so. If you do not wish to -# provide this exception without modification, you must delete this exception -# statement from your version and license this file solely under the GPL without -# exception. -# -# -# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission. -# Copyright (C) 2005 Red Hat, Inc. -# All rights reserved. -# END COPYRIGHT BLOCK -# -# -# GNU Makefile for Directory Server and LDAP SDK libraries -# - -BUILD_ROOT = ../.. -LDAP_SRC = $(BUILD_ROOT)/ldap - -NOSTDCLEAN=true # don't let nsconfig.mk define target clean -NOSTDSTRIP=true # don't let nsconfig.mk define target strip - -OBJDEST = $(OBJDIR)/lib -LIBDIR = $(LDAP_LIBDIR) - -include $(BUILD_ROOT)/nsdefs.mk -include $(BUILD_ROOT)/nsconfig.mk -include $(LDAP_SRC)/nsldap.mk -# the following lines are to make this work for -# both db1.85 and db2.0 -ifndef LDAP_USE_OLD_DB -ldap_db_depend:=$(DB_LIB_DEP) -CFLAGS+= -I$(DB_INCLUDE) -else -ldap_db_depend:=_berkeley_db -endif - -ifeq ($(ARCH), WINNT) -LDAPRES= $(addprefix $(LIBDIR)/, libldap/*.res) -LCACHERES= $(addprefix $(LIBDIR)/, liblcache/*.res) -endif - -########## Security ####################### -##########ifneq ($(SECURITY), none) - -# Where to find libsec and friends -SECDIR=$(NSCP_DISTDIR)/lib - -ifeq ($(ARCH), WINNT) -# Used by libsec in Win32 -SEC_SYSLIBS=rpcrt4.lib user32.lib -# When pulling in libsec/nspr20, WinSock and WinMM must be linked in -ifdef INCLUDE_SSL -EXTRA_LIBS=winmm.lib wsock32.lib -SDK_EXPORT_DEFS=ldapsdk.def -SDK_EXPORT_DEPS=msdos/winsock/nsldap32.def msdos/winsock/ldapssl.def -else -SDK_EXPORT_DEFS=msdos/winsock/nsldap32.def -endif -SDK_EXPORT_FLAGS=/DEF:$(SDK_EXPORT_DEFS) -LCACHE_EXPORT_DEFS=msdos/winsock/nslch32.def -LCACHE_EXPORT_FLAGS=/DEF:$(LCACHE_EXPORT_DEFS) -endif - -EXPLDAP=libldap -EXPLCH=liblcache -EXPLDSSL=libldap_ssl - -ifeq ($(ARCH), AIX) -USE_DLL_EXPORTS_FILE=1 -else -ifeq ($(ARCH), SOLARIS) -USE_DLL_EXPORTS_FILE=1 -else -ifeq ($(ARCH), IRIX) -USE_DLL_EXPORTS_FILE=1 -endif -endif -endif - - -ifeq ($(USE_DLL_EXPORTS_FILE), 1) -ifdef INCLUDE_SSL -SDK_EXPORT_DEFS=$(OBJDEST)/$(EXPLDAP).exp $(OBJDEST)/$(EXPLDSSL).exp -DLL_EXPORT_FLAGS=$(SDK_EXPORT_DEFS) -else -SDK_EXPORT_DEFS=$(OBJDEST)/$(EXPLDAP).exp -endif -DLL_EXPORT_FLAGS=$(addprefix $(DLLEXPORTS_PREFIX), $(SDK_EXPORT_DEFS)) -LCACHE_EXPORT_DEFS=$(OBJDEST)/$(EXPLCH).exp -DLL_EXPORT_FLAGS2=$(addprefix $(DLLEXPORTS_PREFIX), $(LCACHE_EXPORT_DEFS)) -endif - - -EXTRA_SECLIBS= $(STATICLIBNSPR) $(LIBSEC) $(LIBXP) $(LIBDB) $(LIBARES) \ - $(LIBSSLIO) $(SEC_SYSLIBS) -EXTRA_SECLIBS_DEP += $(STATICLIBNSPR) $(LIBXP_DEP) \ - $(LIBSSLIO_DEP) -EXTRA_SECLIBS_DEP += $(LIBSEC_DEP) $(LIBDB_DEP) $(LIBARES_DEP) - -ifdef INCLUDE_SSL -# -# include security code in the LDAP DLL -# -EXTRA_LIBS += $(EXTRA_SECLIBS) -EXTRA_LIBS_DEP += $(EXTRA_SECLIBS_DEP) -ifneq ($(ARCH), WINNT) -DLL_LDFLAGS += -$(LIBPATH)$(SECDIR) -endif - -SSLOBJS= $(addprefix $(LIBDIR)/, libssldap/*.o) -SSL_DEP= $(LDAPSDK_DEP) - -endif -########## end Security ################### - -# The following libraries are built by this Makefile: -# dynamic LDAP library -DLIBLDAP= $(addprefix $(LIBDIR)/, $(LIBLDAP_DLL).$(DLL_SUFFIX)) -# static LDAP library -SLIBLDAP= $(addprefix $(LIBDIR)/, $(LIBLDAP_LIB).$(LIB_SUFFIX)) -# dynamic LCACHE library -DLIBLCACHE= $(addprefix $(LIBDIR)/, $(LIBLCACHE_DLL).$(DLL_SUFFIX)) -# static LCACHE library -SLIBLCACHE= $(addprefix $(LIBDIR)/, $(LIBLCACHE_LIB).$(LIB_SUFFIX)) - -# objects built by libavl/Makefile -AVLOBJS= $(addprefix $(LIBDIR)/, libavl/*.o) -# objects built by berkeley_db/Makefile -# the following lines pull in the new db library with the liblcache dll is built -# this is a hack, but can't see how to add it easier without a new LINK_DLL2. -ifndef LDAP_USE_OLD_DB -DLL_EXPORT_FLAGS2+=$(DB_STATIC_LIB) -else -BERKDBOBJS= $(addprefix $(LIBDIR)/, libdb/*.o) -endif -# objects built by liblber/Makefile -LBEROBJS= $(addprefix $(LIBDIR)/, liblber/*.o) -# objects built by liblcache/Makefile -LCACHEOBJS= $(addprefix $(LIBDIR)/, liblcache/*.o) -# objects built by libldap/Makefile -LDAPOBJS= $(addprefix $(LIBDIR)/, libldap/*.o) -# one object built by libldap/Makefile -REGEXOBJ= $(addprefix $(LIBDIR)/, libldap/regex.o) -# objects built by libldbm/Makefile -LDBMOBJS= $(addprefix $(LIBDIR)/, libldbm/*.o) -# objects built by libldif/Makefile -LDIFOBJS= $(addprefix $(LIBDIR)/, libldif/*.o) - -all: $(LDAP_LIBDIR) clientSDK - -buildDirectory: $(LDAP_LIBDIR) _libavl _libldif _liblitekey _libutil - -ifdef LDAP_USE_OLD_DB -_berkeley_db: - cd berkeley_db; $(MAKE) $(MFLAGS) all -endif - -_libavl: - cd libavl; $(MAKE) $(MFLAGS) all - -_liblber: - cd liblber; $(MAKE) $(MFLAGS) all - -_libldbm: - cd libldbm; $(MAKE) $(MFLAGS) all - -_libldif: - cd libldif; $(MAKE) $(MFLAGS) all - -_liblitekey: - cd liblitekey; $(MAKE) $(MFLAGS) all - -_libssldap: - cd libssldap; $(MAKE) $(MFLAGS) all - -_libutil: -ifeq ($(ARCH), WINNT) - cd libutil; $(MAKE) $(MFLAGS) all -endif - -_libldap: - cd libldap; $(MAKE) $(MFLAGS) all - -_slapd: - cd $(LDAP_SRC)/servers/slapd; $(MAKE) $(MFLAGS) all - -_back-ldbm: - cd $(LDAP_SRC)/servers/slapd/back-ldbm; $(MAKE) $(MFLAGS) all - -_back-ldif: - cd $(LDAP_SRC)/servers/slapd/back-ldif; $(MAKE) $(MFLAGS) all - -_liblcache: - cd liblcache; $(MAKE) $(MFLAGS) clientSDK - -ifdef INCLUDE_SSL -# -# There is no easy way to include libsec and friends when making static libs -# (at least on UNIX) so we don't bother making them when INCLUDE_SSL is set. -# Also if LDAP_NO_LIBLCACHE is 1, we don't build liblcache. Simple, huh? -# -ifeq ($(LDAP_NO_LIBLCACHE),1) -LIBS2BUILD=$(DLIBLDAP) -else -LIBS2BUILD=$(DLIBLDAP) $(DLIBLCACHE) -endif -else -ifeq ($(LDAP_NO_LIBLCACHE),1) -LIBS2BUILD=$(DLIBLDAP) $(SLIBLDAP) -else -LIBS2BUILD=$(DLIBLDAP) $(SLIBLDAP) $(DLIBLCACHE) $(SLIBLCACHE) -endif - -endif - -clientSDK: $(LDAP_LIBDIR) _libavl _liblber _libldif \ - _libssldap _libutil $(LIBS2BUILD) - -OBJS=$(LBEROBJS) $(LDAPOBJS) $(SSLOBJS) $(LDAPRES) - -$(DLIBLDAP): $(LDAP_OUT_DIR) _liblber _libldap $(EXTRA_LIBS_DEP) $(SSL_DEP) \ - $(SDK_EXPORT_DEFS) - $(LINK_DLL) $(SDK_EXPORT_FLAGS) $(EXTRA_LIBS) - -$(SLIBLDAP): $(LDAP_OUT_DIR) _liblber _libldap $(EXTRA_LIBS_DEP) $(SSL_DEP) - $(LINK_LIB) - -OBJS2=$(LCACHEOBJS) $(AVLOBJS) $(LDBMOBJS) $(BERKDBOBJS) $(LDIFOBJS) \ - $(REGEXOBJ) $(LCACHERES) - -ifeq ($(ARCH), WINNT) -# liblber is included here only to pick up ber_err_print() -# libsec and libxp are included here only to pick up SHA1_Hash() -OTHER_SECLIBS= $(LIBSEC) $(LIBXP) -EXTRA_LCACHE_LIBS=$(LDAP_SDK_LIBLDAP_DLL) $(LDAP_LIBLBER) $(OTHER_SECLIBS) -EXTRA_LCACHE_LIBS_DEP= $(LDAP_SDK_LIBLDAP_DLL_DEP) $(LDAP_LIBLBER_DEP) \ - $(EXTRA_SECLIBS_DEP) -endif - -ifeq ($(ARCH), AIX) -DLL_LDFLAGS += -$(LIBPATH)$(SECDIR) -# extra libraries are needed on AIX as well -EXTRA_LCACHE_LIBS=$(LDAP_SDK_LIBLDAP_DLL) $(LDAP_LIBLBER) $(EXTRA_SECLIBS) -EXTRA_LCACHE_LIBS_DEP= $(LDAP_SDK_LIBLDAP_DLL_DEP) $(LDAP_LIBLBER_DEP) \ - $(EXTRA_SECLIBS_DEP) -endif - -$(DLIBLCACHE): $(LDAP_OUT_DIR) $(ldap_db_depend) _liblcache _libavl _libldbm \ - _libldif $(EXTRA_LCACHE_LIBS_DEP) $(LCACHE_EXPORT_DEFS) - $(LINK_DLL2) $(LCACHE_EXPORT_FLAGS) $(EXTRA_LCACHE_LIBS) $(EXTRA_LIBS) - -$(SLIBLCACHE): $(LDAP_OUT_DIR) $(ldap_db_depend) _liblcache libavl _libldbm \ - _libldif - $(LINK_LIB2) - -# Need to add exports if building with SSL in NT -ifeq ($(ARCH), WINNT) -ifdef INCLUDE_SSL -$(SDK_EXPORT_DEFS) : $(SDK_EXPORT_DEPS) - cat $(SDK_EXPORT_DEPS) > $(SDK_EXPORT_DEFS) -endif -endif - -clean: FORCE -ifdef LDAP_USE_OLD_DB - cd berkeley_db; $(MAKE) $(MFLAGS) clean -endif - cd libavl; $(MAKE) $(MFLAGS) clean - cd libldif; $(MAKE) $(MFLAGS) clean -ifeq ($(ARCH), WINNT) - cd libutil; $(MAKE) $(MFLAGS) clean - -(cd $(LDAP_SRC)/servers/slapd; $(MAKE) $(MFLAGS) clean) -endif - -(cd $(LDAP_SRC)/servers/slapd/back-ldbm; $(MAKE) $(MFLAGS) clean) - -(cd $(LDAP_SRC)/servers/slapd/back-ldif; $(MAKE) $(MFLAGS) clean) -ifeq ($(ARCH), WINNT) - -$(RM) $(LIBLDAP_DLL_OBJ) -endif - -$(RM) $(LIBS2BUILD) - -veryclean: clean - -FORCE: - -$(LDAP_OUT_DIR): - $(MKDIR) $(LDAP_OUT_DIR) - -GENEXPORTS=$(PERL) $(LDAP_SRC)/build/genexports.pl -# WINDEFDIR is now defined below via a recursive make. This is a -# bit of a hack to avoid collisions with SDK_EXPORT_DEFS (defined above). -#WINDEFDIR=msdos/winsock -MACDEFDIR=macintosh -GENEXPARGS=$(BUILD_DEBUG) $(DIRSDK_VERSION_DLL_SUFFIX) $(DIRSDK_VERSION) - -DEFLDAPW32=$(WINDEFDIR)/nsldap32 -DEFLDAPW16REV=$(WINDEFDIR)/nsldap -DEFLDAPW16=$(WINDEFDIR)/libldap -DEFLDAPW32BC=$(WINDEFDIR)/nsldap32bc -DEFLDSSLW32=$(WINDEFDIR)/ldapssl -DEFLDSSLW32BC=$(WINDEFDIR)/ldapsslbc -DEFLCHW32=$(WINDEFDIR)/nslch32 -DEFLCHW32BC=$(WINDEFDIR)/nslch32bc -DEFLDAPMACPPC=$(MACDEFDIR)/libldap-PPC.u -DEFLDAPMACCLIENTPPC=$(MACDEFDIR)/LDAPClientPPC.prj -DEFLDAPMACCLIENT68K=$(MACDEFDIR)/LDAPClient68K.prj - -# nsdefs.mk contains version number definitions.... -OTHERDEFDEPS=$(BUILD_ROOT)/nsdefs.mk - -exportfiles: - $(MAKE) $(MFLAGS) WINDEFDIR=msdos/winsock doExportFiles - -doExportFiles: $(DEFLDAPW32).def $(DEFLDAPW16).def $(DEFLDAPW16REV).def \ - $(DEFLDAPW32BC).def $(DEFLDSSLW32).def $(DEFLDSSLW32BC).def \ - $(DEFLCHW32).def $(DEFLCHW32BC).def \ - $(DEFLDAPMACPPC).exp $(DEFLDAPMACCLIENTPPC).exp \ - $(DEFLDAPMACCLIENT68K).exp - -# -# All the various flavors of Windows: -# -$(DEFLDAPW32).def: $(DEFLDAPW32).tdf libldap.ex $(OTHERDEFDEPS) - $(GENEXPORTS) Win32 $< libldap.ex $(GENEXPARGS) > $@ - -$(DEFLDAPW16).def: $(DEFLDAPW16).tdf libldap.ex $(OTHERDEFDEPS) - $(GENEXPORTS) Win16 $< libldap.ex $(GENEXPARGS) > $@ - -$(DEFLDAPW16REV).def: $(DEFLDAPW16REV).tdf libldap.ex $(OTHERDEFDEPS) - $(GENEXPORTS) Win16Rev $< libldap.ex $(GENEXPARGS) > $@ - -$(DEFLDAPW32BC).def: $(DEFLDAPW32BC).tdf libldap.ex $(OTHERDEFDEPS) - $(GENEXPORTS) WinBC $< libldap.ex $(GENEXPARGS) > $@ - -$(DEFLDSSLW32).def: $(DEFLDSSLW32).tdf libldap_ssl.ex $(OTHERDEFDEPS) - $(GENEXPORTS) Win32 $< libldap_ssl.ex $(GENEXPARGS) > $@ - -$(DEFLDSSLW32BC).def: $(DEFLDSSLW32BC).tdf libldap_ssl.ex $(OTHERDEFDEPS) - $(GENEXPORTS) WinBC $< libldap_ssl.ex $(GENEXPARGS) > $@ - -$(DEFLCHW32).def: $(DEFLCHW32).tdf liblcache.ex $(OTHERDEFDEPS) - $(GENEXPORTS) Win32 $< liblcache.ex $(GENEXPARGS) > $@ - -$(DEFLCHW32BC).def: $(DEFLCHW32BC).tdf liblcache.ex $(OTHERDEFDEPS) - $(GENEXPORTS) WinBC $< liblcache.ex $(GENEXPARGS) > $@ - -# -# MacOS: -# -$(DEFLDAPMACPPC).exp: libldap.ex $(OTHERDEFDEPS) - $(GENEXPORTS) MacOS Standard $< $(GENEXPARGS) > $@ - -$(DEFLDAPMACCLIENTPPC).exp: libldap.ex $(OTHERDEFDEPS) - $(GENEXPORTS) MacOS Standard $< $(GENEXPARGS) > $@ - -$(DEFLDAPMACCLIENT68K).exp: libldap.ex $(OTHERDEFDEPS) - $(GENEXPORTS) MacOS Standard $< $(GENEXPARGS) > $@ - -ifeq ($(USE_DLL_EXPORTS_FILE), 1) -# generic rules to create standard export/map files -$(OBJDEST)/$(EXPLDAP).exp: libldap.ex $(OTHERDEFDEPS) - $(GENEXPORTS) $(ARCH) Standard $< $(GENEXPARGS) > $@ - -$(OBJDEST)/$(EXPLDSSL).exp: libldap_ssl.ex $(OTHERDEFDEPS) - $(GENEXPORTS) $(ARCH) Standard $< $(GENEXPARGS) > $@ - -$(OBJDEST)/$(EXPLCH).exp: liblcache.ex $(OTHERDEFDEPS) - $(GENEXPORTS) $(ARCH) Standard $< $(GENEXPARGS) > $@ -endif diff --git a/ldap/libraries/libavl/Makefile b/ldap/libraries/libavl/Makefile deleted file mode 100644 index e79c2f1e..00000000 --- a/ldap/libraries/libavl/Makefile +++ /dev/null @@ -1,80 +0,0 @@ -# -# BEGIN COPYRIGHT BLOCK -# This Program is free software; you can redistribute it and/or modify it under -# the terms of the GNU General Public License as published by the Free Software -# Foundation; version 2 of the License. -# -# This Program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License along with -# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple -# Place, Suite 330, Boston, MA 02111-1307 USA. -# -# In addition, as a special exception, Red Hat, Inc. gives You the additional -# right to link the code of this Program with code not covered under the GNU -# General Public License ("Non-GPL Code") and to distribute linked combinations -# including the two, subject to the limitations in this paragraph. Non-GPL Code -# permitted under this exception must only link to the code of this Program -# through those well defined interfaces identified in the file named EXCEPTION -# found in the source code files (the "Approved Interfaces"). The files of -# Non-GPL Code may instantiate templates or use macros or inline functions from -# the Approved Interfaces without causing the resulting work to be covered by -# the GNU General Public License. Only Red Hat, Inc. may make changes or -# additions to the list of Approved Interfaces. You must obey the GNU General -# Public License in all respects for all of the Program code and other code used -# in conjunction with the Program except the Non-GPL Code covered by this -# exception. If you modify this file, you may extend this exception to your -# version of the file, but you are not obligated to do so. If you do not wish to -# provide this exception without modification, you must delete this exception -# statement from your version and license this file solely under the GPL without -# exception. -# -# -# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission. -# Copyright (C) 2005 Red Hat, Inc. -# All rights reserved. -# END COPYRIGHT BLOCK -# -# -# GNU Makefile for libavl -# - -LDAP_SRC = ../.. -BUILD_ROOT = ../../.. - -NOSTDCLEAN=true # don't let nsconfig.mk define target clean -NOSTDSTRIP=true # don't let nsconfig.mk define target strip - -OBJDEST = $(OBJDIR)/lib/libavl -LIBDIR = $(LDAP_LIBDIR) - -include $(BUILD_ROOT)/nsdefs.mk -include $(BUILD_ROOT)/nsconfig.mk -include $(LDAP_SRC)/nsldap.mk - -CFLAGS += $(SLCFLAGS) - -LIBAVL_OBJS= avl.o - -OBJS = $(addprefix $(OBJDEST)/, $(LIBAVL_OBJS)) - -LIBAVL= $(addprefix $(LIBDIR)/, libavl.$(LIB_SUFFIX)) - -clientSDK: all - -all: $(OBJDEST) $(LIBDIR) $(LIBAVL) - -$(LIBAVL): $(OBJS) - $(LINK_LIB) - -veryclean: clean - -clean: - $(RM) $(OBJS) - $(RM) $(LIBAVL) - -$(OBJDEST): - $(MKDIR) $(OBJDEST) - |