path: root/guestfs.pod

=encoding utf8

=head1 NAME

guestfs - Library for accessing and modifying virtual machine images

=head1 SYNOPSIS

 #include <guestfs.h>
 
 guestfs_h *handle = guestfs_create ();
 guestfs_add_drive (handle, "guest.img");
 guestfs_launch (handle);
 guestfs_wait_ready (handle);
 guestfs_mount (handle, "/dev/sda1", "/");
 guestfs_touch (handle, "/hello");
 guestfs_sync (handle);
 guestfs_close (handle);

=head1 DESCRIPTION

Libguestfs is a library for accessing and modifying guest disk images.
Amongst the things this is good for: making batch configuration
changes to guests, getting disk used/free statistics (see also:
virt-df), migrating between virtualization systems (see also:
virt-p2v), performing partial backups, performing partial guest
clones, cloning guests and changing registry/UUID/hostname info, and
much else besides.

Libguestfs uses Linux kernel and qemu code, and can access any type of
guest filesystem that Linux and qemu can, including but not limited
to: ext2/3/4, btrfs, FAT and NTFS, LVM, many different disk partition
schemes, qcow, qcow2, vmdk.

Libguestfs provides ways to enumerate guest storage (eg. partitions,
LVs, what filesystem is in each LV, etc.).  It can also run commands
in the context of the guest.  Also you can access filesystems over FTP.

Libguestfs is a library that can be linked with C and C++ management
programs (or management programs written in OCaml, Perl or Python).
You can also use it from shell scripts or the command line.

You don't need to be root to use libguestfs, although obviously you do
need enough permissions to access the disk images.

=head1 CONNECTION MANAGEMENT

If you are using the high-level API, then you should call the
functions in the following order:

 guestfs_h *handle = guestfs_create ();
 
 guestfs_add_drive (handle, "guest.img");
 /* call guestfs_add_drive additional times if the guest has
  * multiple disks
  */
 
 guestfs_launch (handle);
 guestfs_wait_ready (handle);

 /* now you can examine what partitions, LVs etc are available
  * you have to mount / at least
  */ 
 guestfs_mount (handle, "/dev/sda1", "/");

 /* now you can perform actions on the guest disk image */
 guestfs_touch (handle, "/hello");
 
 /* you only need to call guestfs_sync if you have made
  * changes to the guest image
  */
 guestfs_sync (handle);
 
 guestfs_close (handle);

C<guestfs_wait_ready> and all of the actions including C<guestfs_sync>
are blocking calls.  You can use the low-level event API to do
non-blocking operations instead.

All functions that return integers, return C<-1> on error.  See
section ERROR HANDLING below for how to handle errors.

=head2 guestfs_h *

C<guestfs_h> is the opaque type representing a connection handle.
Create a handle by calling C<guestfs_create>.  Call C<guestfs_close>
to free the handle and release all resources used.

For information on using multiple handles and threads, see the section
MULTIPLE HANDLES AND MULTIPLE THREADS below.

=head2 guestfs_create

 guestfs_h *guestfs_create (void);

Create a connection handle.

You have to call C<guestfs_add_drive> on the handle at least once.

This function returns a non-NULL pointer to a handle on success or
NULL on error.

After configuring the handle, you have to call C<guestfs_launch> and
C<guestfs_wait_ready>.

You may also want to configure error handling for the handle.  See
ERROR HANDLING section below.

=head2 guestfs_close

 void guestfs_close (guestfs_h *handle);

This closes the connection handle and frees up all resources used.

=head1 ERROR HANDLING

The convention in all functions that return C<int> is that they return
C<-1> to indicate an error.  You can get additional information on
errors by calling C<guestfs_last_error> and/or by setting up an error
handler with C<guestfs_set_error_handler>.

The default error handler prints the information string to C<stderr>.

Out of memory errors are handled differently.  The default action is
to call L<abort(3)>.  If this is undesirable, then you can set a
handler using C<guestfs_set_out_of_memory_handler>.

=head2 guestfs_last_error

 const char *guestfs_last_error (guestfs_h *handle);

This returns the last error message that happened on C<handle>.  If
there has not been an error since the handle was created, then this
returns C<NULL>.

The lifetime of the returned string is until the next error occurs, or
C<guestfs_close> is called.

The error string is not localized (ie. is always in English), because
this makes searching for error messages in search engines give the
largest number of results.

=head2 guestfs_set_error_handler

 typedef void (*guestfs_error_handler_cb) (guestfs_h *handle,
                                           void *data,
                                           const char *msg);
 void guestfs_set_error_handler (guestfs_h *handle,
                                 guestfs_error_handler_cb cb,
                                 void *data);

The callback C<cb> will be called if there is an error.  The
parameters passed to the callback are an opaque data pointer and the
error message string.

Note that the message string C<msg> is freed as soon as the callback
function returns, so if you want to stash it somewhere you must make
your own copy.

The default handler prints messages on C<stderr>.

If you set C<cb> to C<NULL> then I<no> handler is called.

=head2 guestfs_get_error_handler

 guestfs_error_handler_cb guestfs_get_error_handler (guestfs_h *handle,
                                                     void **data_rtn);

Returns the current error handler callback.

=head2 guestfs_set_out_of_memory_handler 

 typedef void (*guestfs_abort_cb) (void);
 int guestfs_set_out_of_memory_handler (guestfs_h *handle,
                                        guestfs_abort_cb);

The callback C<cb> will be called if there is an out of memory
situation.  I<Note this callback must not return>.

The default is to call L<abort(3)>.

You cannot set C<cb> to C<NULL>.  You can't ignore out of memory
situations.

=head2 guestfs_get_out_of_memory_handler

 guestfs_abort_fn guestfs_get_out_of_memory_handler (guestfs_h *handle);

This returns the current out of memory handler.

=head1 PATH

Libguestfs needs a kernel and initrd.img, which it finds by looking
along an internal path.

By default it looks for these in the directory C<$libdir/guestfs>
(eg. C</usr/local/lib/guestfs> or C</usr/lib64/guestfs>).

Use C<guestfs_set_path> or set the environment variable
C<LIBGUESTFS_PATH> to change the directories that libguestfs will
search in.  The value is a colon-separated list of paths.  The current
directory is I<not> searched unless the path contains an empty element
or C<.>.  For example C<LIBGUESTFS_PATH=:/usr/lib/guestfs> would
search the current directory and then C</usr/lib/guestfs>.

=head1 HIGH-LEVEL API ACTIONS

@ACTIONS@

=head1 STRUCTURES

@STRUCTS@

=head1 STATE MACHINE AND LOW-LEVEL EVENT API

Internally, libguestfs is implemented by running a virtual machine
using L<qemu(1)>.  QEmu runs as a child process of the main program,
and most of this discussion won't make sense unless you understand
that the complexity is dealing with the (asynchronous) actions of the
child process.

                            child process
  ___________________       _________________________
 /                   \     /                         \
 | main program      |     | qemu +-----------------+|
 |                   |     |      | Linux kernel    ||
 +-------------------+     |      +-----------------+|
 | libguestfs     <-------------->| guestfsd        ||
 |                   |     |      +-----------------+|
 \___________________/     \_________________________/

The diagram above shows libguestfs communicating with the guestfsd
daemon running inside the qemu child process.  There are several
points of failure here: qemu can fail to start, the virtual machine
inside qemu can fail to boot, guestfsd can fail to start or not
establish communication, any component can start successfully but fail
asynchronously later, and so on.

=head2 STATE MACHINE

libguestfs uses a state machine to model the child process:

                         |
                    guestfs_create
                         |
                         |
                     ____V_____
                    /          \
                    |  CONFIG  |
                    \__________/
                     ^ ^   ^  \
                    /  |    \  \ guestfs_launch
                   /   |    _\__V______
                  /    |   /           \
                 /     |   | LAUNCHING |
                /      |   \___________/
               /       |       /
              /        |  guestfs_wait_ready
             /         |     /
    ______  /        __|____V
   /      \ ------> /        \
   | BUSY |         | READY  |
   \______/ <------ \________/

The normal transitions are (1) CONFIG (when the handle is created, but
there is no child process), (2) LAUNCHING (when the child process is
booting up), (3) alternating between READY and BUSY as commands are
issued to, and carried out by, the child process.

The guest may be killed by C<guestfs_kill_subprocess>, or may die
asynchronously at any time (eg. due to some internal error), and that
causes the state to transition back to CONFIG.

Configuration commands for qemu such as C<guestfs_add_drive> can only
be issued when in the CONFIG state.

The high-level API offers two calls that go from CONFIG through
LAUNCHING to READY.  C<guestfs_launch> is a non-blocking call that
starts up the child process, immediately moving from CONFIG to
LAUNCHING.  C<guestfs_wait_ready> blocks until the child process is
READY to accept commands (or until some failure or timeout).  The
low-level event API described below provides a non-blocking way to
replace C<guestfs_wait_ready>.

High-level API actions such as C<guestfs_mount> can only be issued
when in the READY state.  These high-level API calls block waiting for
the command to be carried out (ie. the state to transition to BUSY and
then back to READY).  But using the low-level event API, you get
non-blocking versions.  (But you can still only carry out one
operation per handle at a time - that is a limitation of the
communications protocol we use).

Finally, the child process sends asynchronous messages back to the
main program, such as kernel log messages.  Mostly these are ignored
by the high-level API, but using the low-level event API you can
register to receive these messages.

=head2 SETTING CALLBACKS TO HANDLE EVENTS

The child process generates events in some situations.  Current events
include: receiving a reply message after some action, receiving a log
message, the child process exits, &c.

Use the C<guestfs_set_*_callback> functions to set a callback for
different types of events.

Only I<one callback of each type> can be registered for each handle.
Calling C<guestfs_set_*_callback> again overwrites the previous
callback of that type.  Cancel all callbacks of this type by calling
this function with C<cb> set to C<NULL>.

=head2 NON-BLOCKING ACTIONS

XXX This section was documented in previous versions but never
implemented in a way which matched the documentation.  For now I have
removed the documentation, pending a working implementation.  See also
C<src/guestfs-actions.c> in the source.


=head2 guestfs_set_send_callback

 typedef void (*guestfs_send_cb) (guestfs_h *g, void *opaque);
 void guestfs_set_send_callback (guestfs_h *handle,
                                 guestfs_send_cb cb,
                                 void *opaque);

The callback function C<cb> will be called whenever a message
which is queued for sending, has been sent.

=head2 guestfs_set_reply_callback

 typedef void (*guestfs_reply_cb) (guestfs_h *g, void *opaque, XDR *xdr);
 void guestfs_set_reply_callback (guestfs_h *handle,
                                  guestfs_reply_cb cb,
                                  void *opaque);

The callback function C<cb> will be called whenever a reply is
received from the child process.  (This corresponds to a transition
from the BUSY state to the READY state).

Note that the C<xdr> that you get in the callback is in C<XDR_DECODE>
mode, and you need to consume it before you return from the callback
function (since it gets destroyed after).

=head2 guestfs_set_log_message_callback

 typedef void (*guestfs_log_message_cb) (guestfs_h *g, void *opaque,
                                         char *buf, int len);
 void guestfs_set_log_message_callback (guestfs_h *handle,
                                        guestfs_log_message_cb cb,
                                        void *opaque);

The callback function C<cb> will be called whenever qemu or the guest
writes anything to the console.

Use this function to capture kernel messages and similar.

Normally there is no log message handler, and log messages are just
discarded.

=head2 guestfs_set_subprocess_quit_callback

 typedef void (*guestfs_subprocess_quit_cb) (guestfs_h *g, void *opaque);
 void guestfs_set_subprocess_quit_callback (guestfs_h *handle,
                                            guestfs_subprocess_quit_cb cb,
                                            void *opaque);

The callback function C<cb> will be called when the child process
quits, either asynchronously or if killed by
C<guestfs_kill_subprocess>.  (This corresponds to a transition from
any state to the CONFIG state).

=head2 guestfs_set_launch_done_callback

 typedef void (*guestfs_launch_done_cb) (guestfs_h *g, void *opaque);
 void guestfs_set_launch_done_callback (guestfs_h *handle,
                                        guestfs_ready_cb cb,
                                        void *opaque);

The callback function C<cb> will be called when the child process
becomes ready first time after it has been launched.  (This
corresponds to a transition from LAUNCHING to the READY state).

You can use this instead of C<guestfs_wait_ready> to implement a
non-blocking wait for the child process to finish booting up.

=head2 EVENT MAIN LOOP

To use the low-level event API and/or to use handles from multiple
threads, you have to provide an event "main loop".  You can write your
own, but if you don't want to write one, two types are provided for
you:

=over 4

=item libguestfs-select

A simple main loop that is implemented using L<select(2)>.

This is the default main loop for new guestfs handles, unless you
call C<guestfs_set_main_loop> after a handle is created.

=item libguestfs-glib

An implementation which can be used with GLib and GTK+ programs.  You
can use this to write graphical (GTK+) programs which use libguestfs
without hanging during long or slow operations.

=back

=head2 MULTIPLE HANDLES AND MULTIPLE THREADS

The support for multiple handles and multiple threads is modelled
after glib (although doesn't require glib, if you use the select-based
main loop).

L<http://library.gnome.org/devel/glib/unstable/glib-The-Main-Event-Loop.html>

You will need to create one main loop for each thread that wants to
use libguestfs.  Each guestfs handle should be confined to one thread.
If you try to pass guestfs handles between threads, you will get
undefined results.

If you only want to use guestfs handles from one thread in your
program, but your program has other threads doing other things, then
you don't need to do anything special.

=head2 SINGLE THREAD CASE

In the single thread case, there is a single select-based main loop
created for you.  All guestfs handles will use this main loop to
execute high level API actions.

=head2 MULTIPLE THREADS CASE

In the multiple threads case, you will need to create a main loop for
each thread that wants to use libguestfs.

To create main loops for other threads, use
C<guestfs_create_main_loop> or C<guestfs_glib_create_main_loop>.

Then you will need to attach each handle to the thread-specific main
loop by calling:

 handle = guestfs_create ();
 guestfs_set_main_loop (handle, main_loop_of_current_thread);

=head2 guestfs_set_main_loop

 void guestfs_set_main_loop (guestfs_h *handle,
                             guestfs_main_loop *main_loop);

Sets the main loop used by high level API actions for this handle.  By
default, the select-based main loop is used (see
C<guestfs_get_default_main_loop>).

You only need to use this in multi-threaded programs, where multiple
threads want to use libguestfs.  Create a main loop for each thread,
then call this function.

You cannot pass guestfs handles between threads.

=head2 guestfs_get_main_loop

 guestfs_main_loop *guestfs_get_main_loop (guestfs_h *handle);

Return the main loop used by C<handle>.

=head2 guestfs_get_default_main_loop

 guestfs_main_loop *guestfs_get_default_main_loop (void);

Return the default select-based main loop.

=head2 guestfs_create_main_loop

 guestfs_main_loop *guestfs_create_main_loop (void);

This creates a select-based main loop.  You should create one main
loop for each additional thread that needs to use libguestfs.

=head2 guestfs_free_main_loop

 void guestfs_free_main_loop (guestfs_main_loop *);

Free the select-based main loop which was previously allocated with
C<guestfs_create_main_loop>.

=head2 WRITING A CUSTOM MAIN LOOP

This isn't documented.  Please see the libguestfs-select and
libguestfs-glib implementations.

=head1 INTERNALS

=head2 COMMUNICATION PROTOCOL

Don't rely on using this protocol directly.  This section documents
how it currently works, but it may change at any time.

The protocol used to talk between the library and the daemon running
inside the qemu virtual machine is a simple RPC mechanism built on top
of XDR (RFC 1014, RFC 1832, RFC 4506).

The detailed format of structures is in C<src/guestfs_protocol.x>
(note: this file is automatically generated).

There are two broad cases, ordinary functions that don't have any
C<FileIn> and C<FileOut> parameters, which are handled with very
simple request/reply messages.  Then there are functions that have any
C<FileIn> or C<FileOut> parameters, which use the same request and
reply messages, but they may also be followed by files sent using a
chunked encoding.

=head3 ORDINARY FUNCTIONS (NO FILEIN/FILEOUT PARAMS)

For ordinary functions, the request message is:

 total length (header + arguments,
      but not including the length word itself)
 struct guestfs_message_header (encoded as XDR)
 struct guestfs_<foo>_args (encoded as XDR)

The total length field allows the daemon to allocate a fixed size
buffer into which it slurps the rest of the message.  As a result, the
total length is limited to C<GUESTFS_MESSAGE_MAX> bytes (currently
4MB), which means the effective size of any request is limited to
somewhere under this size.

Note also that many functions don't take any arguments, in which case
the C<guestfs_I<foo>_args> is completely omitted.

The header contains the procedure number (C<guestfs_proc>) which is
how the receiver knows what type of args structure to expect, or none
at all.

The reply message for ordinary functions is:

 total length (header + ret,
      but not including the length word itself)
 struct guestfs_message_header (encoded as XDR)
 struct guestfs_<foo>_ret (encoded as XDR)

As above the C<guestfs_I<foo>_ret> structure may be completely omitted
for functions that return no formal return values.

As above the total length of the reply is limited to
C<GUESTFS_MESSAGE_MAX>.

In the case of an error, a flag is set in the header, and the reply
message is slightly changed:

 total length (header + error,
      but not including the length word itself)
 struct guestfs_message_header (encoded as XDR)
 struct guestfs_message_error (encoded as XDR)

The C<guestfs_message_error> structure contains the error message as a
string.

=head3 FUNCTIONS THAT HAVE FILEIN PARAMETERS

A C<FileIn> parameter indicates that we transfer a file I<into> the
guest.  The normal request message is sent (see above).  However this
is followed by a sequence of file chunks.

 total length (header + arguments,
      but not including the length word itself,
      and not including the chunks)
 struct guestfs_message_header (encoded as XDR)
 struct guestfs_<foo>_args (encoded as XDR)
 sequence of chunks for FileIn param #0
 sequence of chunks for FileIn param #1 etc.

The "sequence of chunks" is:

 length of chunk (not including length word itself)
 struct guestfs_chunk (encoded as XDR)
 length of chunk
 struct guestfs_chunk (encoded as XDR)
   ...
 length of chunk
 struct guestfs_chunk (with data.data_len == 0)

The final chunk has the C<data_len> field set to zero.  Additionally a
flag is set in the final chunk to indicate either successful
completion or early cancellation.

At time of writing there are no functions that have more than one
FileIn parameter.  However this is (theoretically) supported, by
sending the sequence of chunks for each FileIn parameter one after
another (from left to right).

Both the library (sender) I<and> the daemon (receiver) may cancel the
transfer.  The library does this by sending a chunk with a special
flag set to indicate cancellation.  When the daemon sees this, it
cancels the whole RPC, does I<not> send any reply, and goes back to
reading the next request.

The daemon may also cancel.  It does this by writing a special word
C<GUESTFS_CANCEL_FLAG> to the socket.  The library listens for this
during the transfer, and if it gets it, it will cancel the transfer
(it sends a cancel chunk).  The special word is chosen so that even if
cancellation happens right at the end of the transfer (after the
library has finished writing and has started listening for the reply),
the "spurious" cancel flag will not be confused with the reply
message.

This protocol allows the transfer of arbitrary sized files (no 32 bit
limit), and also files where the size is not known in advance
(eg. from pipes or sockets).  However the chunks are rather small
(C<GUESTFS_MAX_CHUNK_SIZE>), so that neither the library nor the
daemon need to keep much in memory.

=head3 FUNCTIONS THAT HAVE FILEOUT PARAMETERS

The protocol for FileOut parameters is exactly the same as for FileIn
parameters, but with the roles of daemon and library reversed.

 total length (header + ret,
      but not including the length word itself,
      and not including the chunks)
 struct guestfs_message_header (encoded as XDR)
 struct guestfs_<foo>_ret (encoded as XDR)
 sequence of chunks for FileOut param #0
 sequence of chunks for FileOut param #1 etc.

=head3 INITIAL MESSAGE

Because the underlying channel (QEmu -net channel) doesn't have any
sort of connection control, when the daemon launches it sends an
initial word (C<GUESTFS_LAUNCH_FLAG>) which indicates that the guest
and daemon is alive.  This is what C<guestfs_wait_ready> waits for.

=head1 ENVIRONMENT VARIABLES

=over 4

=item LIBGUESTFS_DEBUG

Set C<LIBGUESTFS_DEBUG=1> to enable verbose messages.  This
has the same effect as calling C<guestfs_set_verbose (handle, 1)>.

=item LIBGUESTFS_PATH

Set the path that libguestfs uses to search for kernel and initrd.img.
See the discussion of paths in section PATH above.

=back

=head1 SEE ALSO

L<guestfish(1)>,
L<qemu(1)>,
L<febootstrap(1)>,
L<http://et.redhat.com/~rjones/libguestfs>.

=head1 AUTHORS

Richard W.M. Jones (C<rjones at redhat dot com>)

=head1 COPYRIGHT

Copyright (C) 2009 Red Hat Inc.
L<http://et.redhat.com/~rjones/libguestfs>

This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA