path: root/fish/guestfish.pod

=encoding utf8

=head1 NAME

guestfish - the libguestfs Filesystem Interactive SHell

=head1 SYNOPSIS

 guestfish [--options] [commands]

 guestfish

 guestfish [--ro|--rw] -a disk.img

 guestfish [--ro|--rw] -a disk.img -m dev[:mountpoint]

 guestfish -d libvirt-domain

 guestfish [--ro|--rw] -a disk.img -i

 guestfish -d libvirt-domain -i

=head1 WARNING

Using guestfish in read/write mode on live virtual machines can be
dangerous, potentially causing disk corruption.  Use the I<--ro>
(read-only) option to use guestfish safely if the disk image or
virtual machine might be live.

=head1 DESCRIPTION

Guestfish is a shell and command-line tool for examining and modifying
virtual machine filesystems.  It uses libguestfs and exposes all of
the functionality of the guestfs API, see L<guestfs(3)>.

Guestfish gives you structured access to the libguestfs API, from
shell scripts or the command line or interactively.  If you want to
rescue a broken virtual machine image, you should look at the
L<virt-rescue(1)> command.

=head1 EXAMPLES

=head2 As an interactive shell

 $ guestfish
 
 Welcome to guestfish, the libguestfs filesystem interactive shell for
 editing virtual machine filesystems.
 
 Type: 'help' for a list of commands
       'man' to read the manual
       'quit' to quit the shell
 
 ><fs> add-ro disk.img
 ><fs> run
 ><fs> list-filesystems
 /dev/sda1: ext4
 /dev/vg_guest/lv_root: ext4
 /dev/vg_guest/lv_swap: swap
 ><fs> mount /dev/vg_guest/lv_root /
 ><fs> cat /etc/fstab
 # /etc/fstab
 # Created by anaconda
 [...]
 ><fs> exit

=head2 From shell scripts

Create a new C</etc/motd> file in a guest or disk image:

 guestfish <<_EOF_
 add disk.img
 run
 mount /dev/vg_guest/lv_root /
 write /etc/motd "Welcome, new users"
 _EOF_

List the LVM logical volumes in a disk image:

 guestfish -a disk.img --ro <<_EOF_
 run
 lvs
 _EOF_

List all the filesystems in a disk image:

 guestfish -a disk.img --ro <<_EOF_
 run
 list-filesystems
 _EOF_

=head2 On one command line

Update C</etc/resolv.conf> in a guest:

 guestfish \
   add disk.img : run : mount /dev/vg_guest/lv_root / : \
   write /etc/resolv.conf "nameserver 1.2.3.4"

Edit C</boot/grub/grub.conf> interactively:

 guestfish --rw --add disk.img \
   --mount /dev/vg_guest/lv_root \
   --mount /dev/sda1:/boot \
   edit /boot/grub/grub.conf

=head2 Mount disks automatically

Use the I<-i> option to automatically mount the
disks from a virtual machine:

 guestfish --ro -a disk.img -i cat /etc/group

 guestfish --ro -d libvirt-domain -i cat /etc/group

Another way to edit C</boot/grub/grub.conf> interactively is:

 guestfish --rw -a disk.img -i edit /boot/grub/grub.conf

=head2 As a script interpreter

Create a 100MB disk containing an ext2-formatted partition:

 #!/usr/bin/guestfish -f
 sparse test1.img 100M
 run
 part-disk /dev/sda mbr
 mkfs ext2 /dev/sda1

=head2 Start with a prepared disk

An alternate way to create a 100MB disk called C<test1.img> containing
a single ext2-formatted partition:

 guestfish -N fs

To list what is available do:

 guestfish -N help | less

=head2 Remote control

 eval "`guestfish --listen`"
 guestfish --remote add-ro disk.img
 guestfish --remote run
 guestfish --remote lvs

=head1 OPTIONS

=over 4

=item B<--help>

Displays general help on options.

=item B<-h>

=item B<--cmd-help>

Lists all available guestfish commands.

=item B<-h cmd>

=item B<--cmd-help cmd>

Displays detailed help on a single command C<cmd>.

=item B<-a image>

=item B<--add image>

Add a block device or virtual machine image to the shell.

The format of the disk image is auto-detected.  To override this and
force a particular format use the I<--format=..> option.

Using this flag is mostly equivalent to using the C<add> command,
with C<readonly:true> if the I<--ro> flag was given, and
with C<format:...> if the I<--format=...> flag was given.

=item B<-c URI>

=item B<--connect URI>

When used in conjunction with the I<-d> option, this specifies
the libvirt URI to use.  The default is to use the default libvirt
connection.

=item B<--csh>

If using the I<--listen> option and a csh-like shell, use this option.
See section L</REMOTE CONTROL AND CSH> below.

=item B<-d libvirt-domain>

=item B<--domain libvirt-domain>

Add disks from the named libvirt domain.  If the I<--ro> option is
also used, then any libvirt domain can be used.  However in write
mode, only libvirt domains which are shut down can be named here.

Domain UUIDs can be used instead of names.

Using this flag is mostly equivalent to using the C<add-domain> command,
with C<readonly:true> if the I<--ro> flag was given, and
with C<format:...> if the I<--format:...> flag was given.

=item B<-D>

=item B<--no-dest-paths>

Don't tab-complete paths on the guest filesystem.  It is useful to be
able to hit the tab key to complete paths on the guest filesystem, but
this causes extra "hidden" guestfs calls to be made, so this option is
here to allow this feature to be disabled.

=item B<--echo-keys>

When prompting for keys and passphrases, guestfish normally turns
echoing off so you cannot see what you are typing.  If you are not
worried about Tempest attacks and there is no one else in the room
you can specify this flag to see what you are typing.

=item B<-f file>

=item B<--file file>

Read commands from C<file>.  To write pure guestfish
scripts, use:

 #!/usr/bin/guestfish -f

=item B<--format=raw|qcow2|..>

=item B<--format>

The default for the I<-a> option is to auto-detect the format of the
disk image.  Using this forces the disk format for I<-a> options which
follow on the command line.  Using I<--format> with no argument
switches back to auto-detection for subsequent I<-a> options.

For example:

 guestfish --format=raw -a disk.img

forces raw format (no auto-detection) for C<disk.img>.

 guestfish --format=raw -a disk.img --format -a another.img

forces raw format (no auto-detection) for C<disk.img> and reverts to
auto-detection for C<another.img>.

If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format.  This avoids a possible
security problem with malicious guests (CVE-2010-3851).  See also
L</add-drive-opts>.

=item B<-i>

=item B<--inspector>

Using L<virt-inspector(1)> code, inspect the disks looking for
an operating system and mount filesystems as they would be
mounted on the real virtual machine.

Typical usage is either:

 guestfish -d myguest -i

(for an inactive libvirt domain called I<myguest>), or:

 guestfish --ro -d myguest -i

(for active domains, readonly), or specify the block device directly:

 guestfish --rw -a /dev/Guests/MyGuest -i

Note that the command line syntax changed slightly over older
versions of guestfish.  You can still use the old syntax:

 guestfish [--ro] -i disk.img

 guestfish [--ro] -i libvirt-domain

Using this flag is mostly equivalent to using the C<inspect-os>
command and then using other commands to mount the filesystems that
were found.

=item B<--keys-from-stdin>

Read key or passphrase parameters from stdin.  The default is
to try to read passphrases from the user by opening C</dev/tty>.

=item B<--listen>

Fork into the background and listen for remote commands.  See section
L</REMOTE CONTROL GUESTFISH OVER A SOCKET> below.

=item B<--live>

Connect to a live virtual machine.
(Experimental, see L<guestfs(3)/ATTACHING TO RUNNING DAEMONS>).

=item B<-m dev[:mountpoint[:options]]>

=item B<--mount dev[:mountpoint[:options]]>

Mount the named partition or logical volume on the given mountpoint.

If the mountpoint is omitted, it defaults to C</>.

You have to mount something on C</> before most commands will work.

If any I<-m> or I<--mount> options are given, the guest is
automatically launched.

If you don't know what filesystems a disk image contains, you can
either run guestfish without this option, then list the partitions,
filesystems and LVs available (see L</list-partitions>,
L</list-filesystems> and L</lvs> commands), or you can use the
L<virt-filesystems(1)> program.

The third (and rarely used) part of the mount parameter is the list of
mount options used to mount the underlying filesystem.  If this is not
given, then the mount options are either the empty string or C<ro>
(the latter if the I<--ro> flag is used).  By specifying the mount
options, you override this default choice.  Probably the only time you
would use this is to enable ACLs and/or extended attributes if the
filesystem can support them:

 -m /dev/sda1:/:acl,user_xattr

Using this flag is equivalent to using the C<mount-options> command.

=item B<-n>

=item B<--no-sync>

Disable autosync.  This is enabled by default.  See the discussion
of autosync in the L<guestfs(3)> manpage.

=item B<-N type>

=item B<--new type>

=item B<-N help>

Prepare a fresh disk image formatted as "type".  This is an
alternative to the I<-a> option: whereas I<-a> adds an existing disk,
I<-N> creates a preformatted disk with a filesystem and adds it.
See L</PREPARED DISK IMAGES> below.

=item B<--progress-bars>

Enable progress bars, even when guestfish is used non-interactively.

Progress bars are enabled by default when guestfish is used as an
interactive shell.

=item B<--no-progress-bars>

Disable progress bars.

=item B<--remote[=pid]>

Send remote commands to C<$GUESTFISH_PID> or C<pid>.  See section
L</REMOTE CONTROL GUESTFISH OVER A SOCKET> below.

=item B<-r>

=item B<--ro>

This changes the I<-a>, I<-d> and I<-m> options so that disks are
added and mounts are done read-only.

The option must always be used if the disk image or virtual machine
might be running, and is generally recommended in cases where you
don't need write access to the disk.

Note that prepared disk images created with I<-N> are not affected by
this option.  Also commands like C<add> are not affected - you have to
specify the C<readonly:true> option explicitly if you need it.

See also L</OPENING DISKS FOR READ AND WRITE> below.

=item B<--selinux>

Enable SELinux support for the guest.  See L<guestfs(3)/SELINUX>.

=item B<-v>

=item B<--verbose>

Enable very verbose messages.  This is particularly useful if you find
a bug.

=item B<-V>

=item B<--version>

Display the guestfish / libguestfs version number and exit.

=item B<-w>

=item B<--rw>

This changes the I<-a>, I<-d> and I<-m> options so that disks are
added and mounts are done read-write.

See L</OPENING DISKS FOR READ AND WRITE> below.

=item B<-x>

Echo each command before executing it.

=back

=head1 COMMANDS ON COMMAND LINE

Any additional (non-option) arguments are treated as commands to
execute.

Commands to execute should be separated by a colon (C<:>), where the
colon is a separate parameter.  Thus:

 guestfish cmd [args...] : cmd [args...] : cmd [args...] ...

If there are no additional arguments, then we enter a shell, either an
interactive shell with a prompt (if the input is a terminal) or a
non-interactive shell.

In either command line mode or non-interactive shell, the first
command that gives an error causes the whole shell to exit.  In
interactive mode (with a prompt) if a command fails, you can continue
to enter commands.

=head1 USING launch (OR run)

As with L<guestfs(3)>, you must first configure your guest by adding
disks, then launch it, then mount any disks you need, and finally
issue actions/commands.  So the general order of the day is:

=over 4

=item *

add or -a/--add

=item *

launch (aka run)

=item *

mount or -m/--mount

=item *

any other commands

=back

C<run> is a synonym for C<launch>.  You must C<launch> (or C<run>)
your guest before mounting or performing any other commands.

The only exception is that if any of the I<-i>, I<-m>, I<--mount>,
I<-N> or I<--new> options were given then C<run> is done
automatically, simply because guestfish can't perform the action you
asked for without doing this.

=head1 OPENING DISKS FOR READ AND WRITE

The guestfish, L<guestmount(1)> and L<virt-rescue(1)> options I<--ro>
and I<--rw> affect whether the other command line options I<-a>,
I<-c>, I<-d>, I<-i> and I<-m> open disk images read-only or for
writing.

In libguestfs E<le> 1.10, guestfish, guestmount and virt-rescue
defaulted to opening disk images supplied on the command line for
write.  To open a disk image read-only you have to do I<-a image --ro>.

This matters: If you accidentally open a live VM disk image writable
then you will cause irreversible disk corruption.

By libguestfs 1.12 we intend to change the default the other way.
Disk images will be opened read-only.  You will have to either specify
I<guestfish --rw>, I<guestmount --rw>, I<virt-rescue --rw>, or change
the configuration file C</etc/libguestfs-tools.conf> in order to get
write access for disk images specified by those other command line
options.

This version of guestfish, guestmount and virt-rescue has a I<--rw>
option which does nothing (it is already the default).  However it is
highly recommended that you use this option to indicate that you need
write access, and prepare your scripts for the day when this option
will be required for write access.

B<Note:> This does I<not> affect commands like L</add> and L</mount>,
or any other libguestfs program apart from guestfish and guestmount.

=head1 QUOTING

You can quote ordinary parameters using either single or double
quotes.  For example:

 add "file with a space.img"

 rm '/file name'

 rm '/"'

A few commands require a list of strings to be passed.  For these, use
a whitespace-separated list, enclosed in quotes.  Strings containing whitespace
to be passed through must be enclosed in single quotes.  A literal single quote
must be escaped with a backslash.

 vgcreate VG "/dev/sda1 /dev/sdb1"
 command "/bin/echo 'foo      bar'"
 command "/bin/echo \'foo\'"

=head1 OPTIONAL ARGUMENTS

Some commands take optional arguments.  These arguments appear in this
documentation as C<[argname:..]>.  You can use them as in these
examples:

 add-drive-opts filename

 add-drive-opts filename readonly:true

 add-drive-opts filename format:qcow2 readonly:false

Each optional argument can appear at most once.  All optional
arguments must appear after the required ones.

=head1 NUMBERS

This section applies to all commands which can take integers
as parameters.

=head2 SIZE SUFFIX

When the command takes a parameter measured in bytes, you can use one
of the following suffixes to specify kilobytes, megabytes and larger
sizes:

=over 4

=item B<k> or B<K> or B<KiB>

The size in kilobytes (multiplied by 1024).

=item B<KB>

The size in SI 1000 byte units.

=item B<M> or B<MiB>

The size in megabytes (multiplied by 1048576).

=item B<MB>

The size in SI 1000000 byte units.

=item B<G> or B<GiB>

The size in gigabytes (multiplied by 2**30).

=item B<GB>

The size in SI 10**9 byte units.

=item B<T> or B<TiB>

The size in terabytes (multiplied by 2**40).

=item B<TB>

The size in SI 10**12 byte units.

=item B<P> or B<PiB>

The size in petabytes (multiplied by 2**50).

=item B<PB>

The size in SI 10**15 byte units.

=item B<E> or B<EiB>

The size in exabytes (multiplied by 2**60).

=item B<EB>

The size in SI 10**18 byte units.

=item B<Z> or B<ZiB>

The size in zettabytes (multiplied by 2**70).

=item B<ZB>

The size in SI 10**21 byte units.

=item B<Y> or B<YiB>

The size in yottabytes (multiplied by 2**80).

=item B<YB>

The size in SI 10**24 byte units.

=back

For example:

 truncate-size /file 1G

would truncate the file to 1 gigabyte.

Be careful because a few commands take sizes in kilobytes or megabytes
(eg. the parameter to L</memsize> is specified in megabytes already).
Adding a suffix will probably not do what you expect.

=head2 OCTAL AND HEXADECIMAL NUMBERS

For specifying the radix (base) use the C convention: C<0> to prefix
an octal number or C<0x> to prefix a hexadecimal number.  For example:

 1234      decimal number 1234
 02322     octal number, equivalent to decimal 1234
 0x4d2     hexadecimal number, equivalent to decimal 1234

When using the C<chmod> command, you almost always want to specify an
octal number for the mode, and you must prefix it with C<0> (unlike
the Unix L<chmod(1)> program):

 chmod 0777 /public  # OK
 chmod 777 /public   # WRONG! This is mode 777 decimal = 01411 octal.

Commands that return numbers usually print them in decimal, but
some commands print numbers in other radices (eg. C<umask> prints
the mode in octal, preceeded by C<0>).

=head1 WILDCARDS AND GLOBBING

Neither guestfish nor the underlying guestfs API performs
wildcard expansion (globbing) by default.  So for example the
following will not do what you expect:

 rm-rf /home/*

Assuming you don't have a directory called literally C</home/*>
then the above command will return an error.

To perform wildcard expansion, use the C<glob> command.

 glob rm-rf /home/*

runs C<rm-rf> on each path that matches (ie. potentially running
the command many times), equivalent to:

 rm-rf /home/jim
 rm-rf /home/joe
 rm-rf /home/mary

C<glob> only works on simple guest paths and not on device names.

If you have several parameters, each containing a wildcard, then glob
will perform a Cartesian product.

=head1 COMMENTS

Any line which starts with a I<#> character is treated as a comment
and ignored.  The I<#> can optionally be preceeded by whitespace,
but B<not> by a command.  For example:

 # this is a comment
         # this is a comment
 foo # NOT a comment

Blank lines are also ignored.

=head1 RUNNING COMMANDS LOCALLY

Any line which starts with a I<!> character is treated as a command
sent to the local shell (C</bin/sh> or whatever L<system(3)> uses).
For example:

 !mkdir local
 tgz-out /remote local/remote-data.tar.gz

will create a directory C<local> on the host, and then export
the contents of C</remote> on the mounted filesystem to
C<local/remote-data.tar.gz>.  (See C<tgz-out>).

To change the local directory, use the C<lcd> command.  C<!cd> will
have no effect, due to the way that subprocesses work in Unix.

=head2 LOCAL COMMANDS WITH INLINE EXECUTION

If a line starts with I<E<lt>!> then the shell command is executed (as
for I<!>), but subsequently any output (stdout) of the shell command
is parsed and executed as guestfish commands.

Thus you can use shell script to construct arbitrary guestfish
commands which are then parsed by guestfish.

For example it is tedious to create a sequence of files
(eg. C</foo.1> through C</foo.100>) using guestfish commands
alone.  However this is simple if we use a shell script to
create the guestfish commands for us:

 <! for n in `seq 1 100`; do echo write /foo.$n $n; done

or with names like C</foo.001>:

 <! for n in `seq 1 100`; do printf "write /foo.%03d %d\n" $n $n; done

When using guestfish interactively it can be helpful to just run the
shell script first (ie. remove the initial C<E<lt>> character so it is
just an ordinary I<!> local command), see what guestfish commands it
would run, and when you are happy with those prepend the C<E<lt>>
character to run the guestfish commands for real.

=head1 PIPES

Use C<command E<lt>spaceE<gt> | command> to pipe the output of the
first command (a guestfish command) to the second command (any host
command).  For example:

 cat /etc/passwd | awk -F: '$3 == 0 { print }'

(where C<cat> is the guestfish cat command, but C<awk> is the host awk
program).  The above command would list all accounts in the guest
filesystem which have UID 0, ie. root accounts including backdoors.
Other examples:

 hexdump /bin/ls | head
 list-devices | tail -1
 tgz-out / - | tar ztf -

The space before the pipe symbol is required, any space after the pipe
symbol is optional.  Everything after the pipe symbol is just passed
straight to the host shell, so it can contain redirections, globs and
anything else that makes sense on the host side.

To use a literal argument which begins with a pipe symbol, you have
to quote it, eg:

 echo "|"

=head1 HOME DIRECTORIES

If a parameter starts with the character C<~> then the tilde may be
expanded as a home directory path (either C<~> for the current user's
home directory, or C<~user> for another user).

Note that home directory expansion happens for users known I<on the
host>, not in the guest filesystem.

To use a literal argument which begins with a tilde, you have to quote
it, eg:

 echo "~"

=head1 ENCRYPTED DISKS

Libguestfs has some support for Linux guests encrypted according to
the Linux Unified Key Setup (LUKS) standard, which includes nearly all
whole disk encryption systems used by modern Linux guests.  Currently
only LVM-on-LUKS is supported.

Identify encrypted block devices and partitions using L</vfs-type>:

 ><fs> vfs-type /dev/sda2
 crypto_LUKS

Then open those devices using L</luks-open>.  This creates a
device-mapper device called C</dev/mapper/luksdev>.

 ><fs> luks-open /dev/sda2 luksdev
 Enter key or passphrase ("key"): <enter the passphrase>

Finally you have to tell LVM to scan for volume groups on
the newly created mapper device:

 vgscan
 vg-activate-all true

The logical volume(s) can now be mounted in the usual way.

Before closing a LUKS device you must unmount any logical volumes on
it and deactivate the volume groups by calling C<vg-activate false VG>
on each one.  Then you can close the mapper device:

 vg-activate false /dev/VG
 luks-close /dev/mapper/luksdev

=head1 WINDOWS PATHS

If a path is prefixed with C<win:> then you can use Windows-style
drive letters and paths (with some limitations).  The following
commands are equivalent:

 file /WINDOWS/system32/config/system.LOG

 file win:\windows\system32\config\system.log

 file WIN:C:\Windows\SYSTEM32\CONFIG\SYSTEM.LOG

The parameter is rewritten "behind the scenes" by looking up the
position where the drive is mounted, prepending that to the path,
changing all backslash characters to forward slash, then resolving the
result using L</case-sensitive-path>.  For example if the E: drive
was mounted on C</e> then the parameter might be rewritten like this:

 win:e:\foo\bar => /e/FOO/bar

This only works in argument positions that expect a path.

=head1 UPLOADING AND DOWNLOADING FILES

For commands such as C<upload>, C<download>, C<tar-in>, C<tar-out> and
others which upload from or download to a local file, you can use the
special filename C<-> to mean "from stdin" or "to stdout".  For example:

 upload - /foo

reads stdin and creates from that a file C</foo> in the disk image,
and:

 tar-out /etc - | tar tf -

writes the tarball to stdout and then pipes that into the external
"tar" command (see L</PIPES>).

When using C<-> to read from stdin, the input is read up to the end of
stdin.  You can also use a special "heredoc"-like syntax to read up to
some arbitrary end marker:

 upload -<<END /foo
 input line 1
 input line 2
 input line 3
 END

Any string of characters can be used instead of C<END>.  The end
marker must appear on a line of its own, without any preceeding or
following characters (not even spaces).

Note that the C<-E<lt>E<lt>> syntax only applies to parameters used to
upload local files (so-called "FileIn" parameters in the generator).

=head1 EXIT ON ERROR BEHAVIOUR

By default, guestfish will ignore any errors when in interactive mode
(ie. taking commands from a human over a tty), and will exit on the
first error in non-interactive mode (scripts, commands given on the
command line).

If you prefix a command with a I<-> character, then that command will
not cause guestfish to exit, even if that (one) command returns an
error.

=head1 REMOTE CONTROL GUESTFISH OVER A SOCKET

Guestfish can be remote-controlled over a socket.  This is useful
particularly in shell scripts where you want to make several different
changes to a filesystem, but you don't want the overhead of starting
up a guestfish process each time.

Start a guestfish server process using:

 eval "`guestfish --listen`"

and then send it commands by doing:

 guestfish --remote cmd [...]

To cause the server to exit, send it the exit command:

 guestfish --remote exit

Note that the server will normally exit if there is an error in a
command.  You can change this in the usual way.  See section
L</EXIT ON ERROR BEHAVIOUR>.

=head2 CONTROLLING MULTIPLE GUESTFISH PROCESSES

The C<eval> statement sets the environment variable C<$GUESTFISH_PID>,
which is how the I<--remote> option knows where to send the commands.
You can have several guestfish listener processes running using:

 eval "`guestfish --listen`"
 pid1=$GUESTFISH_PID
 eval "`guestfish --listen`"
 pid2=$GUESTFISH_PID
 ...
 guestfish --remote=$pid1 cmd
 guestfish --remote=$pid2 cmd

=head2 REMOTE CONTROL AND CSH

When using csh-like shells (csh, tcsh etc) you have to add the
I<--csh> option:

 eval "`guestfish --listen --csh`"

=head2 REMOTE CONTROL DETAILS

Remote control happens over a Unix domain socket called
C</tmp/.guestfish-$UID/socket-$PID>, where C<$UID> is the effective
user ID of the process, and C<$PID> is the process ID of the server.

Guestfish client and server versions must match exactly.

=head1 PREPARED DISK IMAGES

Use the I<-N type> or I<--new type> parameter to select one of a set
of preformatted disk images that guestfish can make for you to save
typing.  This is particularly useful for testing purposes.  This
option is used instead of the I<-a> option, and like I<-a> can appear
multiple times (and can be mixed with I<-a>).

The new disk is called C<test1.img> for the first I<-N>, C<test2.img>
for the second and so on.  Existing files in the current directory are
I<overwritten>.

The type briefly describes how the disk should be sized, partitioned,
how filesystem(s) should be created, and how content should be added.
Optionally the type can be followed by extra parameters, separated by
C<:> (colon) characters.  For example, I<-N fs> creates a default
100MB, sparsely-allocated disk, containing a single partition, with
the partition formatted as ext2.  I<-N fs:ext4:1G> is the same, but
for an ext4 filesystem on a 1GB disk instead.

To list the available types and any extra parameters they take, run:

 guestfish -N help | less

Note that the prepared filesystem is not mounted.  You would usually
have to use the C<mount /dev/sda1 /> command or add the
I<-m /dev/sda1> option.

If any I<-N> or I<--new> options are given, the guest is automatically
launched.

=head2 EXAMPLES

Create a 100MB disk with an ext4-formatted partition:

 guestfish -N fs:ext4

Create a 32MB disk with a VFAT-formatted partition, and mount it:

 guestfish -N fs:vfat:32M -m /dev/sda1

Create a blank 200MB disk:

 guestfish -N disk:200M

=head1 PROGRESS BARS

Some (not all) long-running commands send progress notification
messages as they are running.  Guestfish turns these messages into
progress bars.

When a command that supports progress bars takes longer than two
seconds to run, and if progress bars are enabled, then you will see
one appearing below the command:

 ><fs> copy-size /large-file /another-file 2048M
 / 10% [#####-----------------------------------------] 00:30

The spinner on the left hand side moves round once for every progress
notification received from the backend.  This is a (reasonably) golden
assurance that the command is "doing something" even if the progress
bar is not moving, because the command is able to send the progress
notifications.  When the bar reaches 100% and the command finishes,
the spinner disappears.

Progress bars are enabled by default when guestfish is used
interactively.  You can enable them even for non-interactive modes
using I<--progress-bars>, and you can disable them completely using
I<--no-progress-bars>.

=head1 GUESTFISH COMMANDS

The commands in this section are guestfish convenience commands, in
other words, they are not part of the L<guestfs(3)> API.

=head2 help

 help
 help cmd

Without any parameter, this provides general help.

With a C<cmd> parameter, this displays detailed help for that command.

=head2 quit | exit

This exits guestfish.  You can also use C<^D> key.

@FISH_COMMANDS@

=head1 COMMANDS

@ACTIONS@

=head1 EXIT CODE

guestfish returns 0 if the commands completed without error, or
1 if there was an error.

=head1 ENVIRONMENT VARIABLES

=over 4

=item EDITOR

The C<edit> command uses C<$EDITOR> as the editor.  If not
set, it uses C<vi>.

=item GUESTFISH_DISPLAY_IMAGE

The C<display> command uses C<$GUESTFISH_DISPLAY_IMAGE> to
display images.  If not set, it uses L<display(1)>.

=item GUESTFISH_PID

Used with the I<--remote> option to specify the remote guestfish
process to control.  See section
L</REMOTE CONTROL GUESTFISH OVER A SOCKET>.

=item HEXEDITOR

The L</hexedit> command uses C<$HEXEDITOR> as the external hex
editor.  If not specified, the external L<hexedit(1)> program
is used.

=item HOME

If compiled with GNU readline support, various files in the
home directory can be used.  See L</FILES>.

=item LIBGUESTFS_APPEND

Pass additional options to the guest kernel.

=item LIBGUESTFS_DEBUG

Set C<LIBGUESTFS_DEBUG=1> to enable verbose messages.  This has the
same effect as using the B<-v> option.

=item LIBGUESTFS_MEMSIZE

Set the memory allocated to the qemu process, in megabytes.  For
example:

 LIBGUESTFS_MEMSIZE=700

=item LIBGUESTFS_PATH

Set the path that guestfish uses to search for kernel and initrd.img.
See the discussion of paths in L<guestfs(3)>.

=item LIBGUESTFS_QEMU

Set the default qemu binary that libguestfs uses.  If not set, then
the qemu which was found at compile time by the configure script is
used.

=item LIBGUESTFS_TRACE

Set C<LIBGUESTFS_TRACE=1> to enable command traces.

=item PAGER

The C<more> command uses C<$PAGER> as the pager.  If not
set, it uses C<more>.

=item TMPDIR

Location of temporary directory, defaults to C</tmp> except for the
cached supermin appliance which defaults to C</var/tmp>.

If libguestfs was compiled to use the supermin appliance then the
real appliance is cached in this directory, shared between all
handles belonging to the same EUID.  You can use C<$TMPDIR> to
configure another directory to use in case C</var/tmp> is not large
enough.

=back

=head1 FILES

=over 4

=item $HOME/.libguestfs-tools.rc

=item /etc/libguestfs-tools.conf

This configuration file controls the default read-only or read-write
mode (I<--ro> or I<--rw>).

See L</OPENING DISKS FOR READ AND WRITE>.

=item $HOME/.guestfish

If compiled with GNU readline support, then the command history
is saved in this file.

=item $HOME/.inputrc

=item /etc/inputrc

If compiled with GNU readline support, then these files can be used to
configure readline.  For further information, please see
L<readline(3)/INITIALIZATION FILE>.

To write rules which only apply to guestfish, use:

 $if guestfish
 ...
 $endif

Variables that you can set in inputrc that change the behaviour
of guestfish in useful ways include:

=over 4

=item completion-ignore-case (default: on)

By default, guestfish will ignore case when tab-completing
paths on the disk.  Use:

 set completion-ignore-case off

to make guestfish case sensitive.

=back

=item test1.img

=item test2.img (etc)

When using the I<-N> or I<--new> option, the prepared disk or
filesystem will be created in the file C<test1.img> in the current
directory.  The second use of I<-N> will use C<test2.img> and so on.
Any existing file with the same name will be overwritten.

=back

=head1 SEE ALSO

L<guestfs(3)>,
L<http://libguestfs.org/>,
L<virt-cat(1)>,
L<virt-copy-in(1)>,
L<virt-copy-out(1)>,
L<virt-df(1)>,
L<virt-edit(1)>,
L<virt-filesystems(1)>,
L<virt-inspector(1)>,
L<virt-list-filesystems(1)>,
L<virt-list-partitions(1)>,
L<virt-ls(1)>,
L<virt-make-fs(1)>,
L<virt-rescue(1)>,
L<virt-resize(1)>,
L<virt-tar(1)>,
L<virt-tar-in(1)>,
L<virt-tar-out(1)>,
L<virt-win-reg(1)>,
L<display(1)>,
L<hexedit(1)>.

=head1 AUTHORS

Richard W.M. Jones (C<rjones at redhat dot com>)

=head1 COPYRIGHT

Copyright (C) 2009-2011 Red Hat Inc.
L<http://libguestfs.org/>

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.