# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Red Hat Inc.
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: libguestfs 1.19.40\n"
"Report-Msgid-Bugs-To: https://bugzilla.redhat.com/enter_bug.cgi?"
"component=libguestfs&product=Virtualization+Tools\n"
"POT-Creation-Date: 2012-09-04 23:15+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"

#: align/domains.c:112 df/domains.c:116
#, c-format
msgid "%s: could not connect to libvirt (code %d, domain %d): %s\n"
msgstr ""

#: align/domains.c:121 df/domains.c:125
#, c-format
msgid "%s: could not get number of running domains (code %d, domain %d): %s\n"
msgstr ""

#: align/domains.c:131 df/domains.c:135
#, c-format
msgid "%s: could not list running domains (code %d, domain %d): %s\n"
msgstr ""

#: align/domains.c:142 df/domains.c:146
#, c-format
msgid "%s: could not get number of inactive domains (code %d, domain %d): %s\n"
msgstr ""

#: align/domains.c:152 df/domains.c:156
#, c-format
msgid "%s: could not list inactive domains (code %d, domain %d): %s\n"
msgstr ""

#: align/domains.c:201 df/domains.c:212
#, c-format
msgid "%s: failed to analyze a disk, see error(s) above\n"
msgstr ""

#: align/domains.c:352 align/scan.c:130 cat/virt-cat.c:121
#: cat/virt-filesystems.c:205 cat/virt-ls.c:194 df/domains.c:438 df/main.c:136
#: edit/virt-edit.c:143 fish/fish.c:233 format/format.c:138
#: fuse/guestmount.c:208 inspector/virt-inspector.c:139
#: rescue/virt-rescue.c:146
#, c-format
msgid "guestfs_create: failed to create handle\n"
msgstr ""

#: align/scan.c:67 cat/virt-cat.c:61 cat/virt-filesystems.c:102
#: cat/virt-ls.c:101 df/main.c:70 edit/virt-edit.c:75 fish/fish.c:103
#: fuse/guestmount.c:100 inspector/virt-inspector.c:77 rescue/virt-rescue.c:63
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr ""

#: align/scan.c:71
#, c-format
msgid ""
"%s: check alignment of virtual machine partitions\n"
"Copyright (C) 2011 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] -d domname\n"
"  %s [--options] -a disk.img [-a disk.img ...]\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  --help               Display brief help\n"
"  -q|--quiet           No output, just exit code\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  -x                   Trace libguestfs API calls\n"
"For more information, see the manpage %s(1).\n"
msgstr ""

#: align/scan.c:150 cat/virt-cat.c:143 cat/virt-filesystems.c:259
#: cat/virt-ls.c:244 df/main.c:160 edit/virt-edit.c:165 fish/fish.c:294
#: format/format.c:190 fuse/guestmount.c:238 inspector/virt-inspector.c:163
#: rescue/virt-rescue.c:202
#, c-format
msgid "%s: unknown long option: %s (%d)\n"
msgstr ""

#: align/scan.c:209 df/main.c:266
#, c-format
msgid "%s: compiled without support for libvirt and/or libxml2.\n"
msgstr ""

#: align/scan.c:215
#, c-format
msgid "%s: --uuid option cannot be used with -a or -d\n"
msgstr ""

#: align/scan.c:304
msgid "alignment < 4K"
msgstr ""

#: align/scan.c:307
msgid "alignment < 64K"
msgstr ""

#: cat/virt-cat.c:65
#, c-format
msgid ""
"%s: display files in a virtual machine\n"
"Copyright (C) 2010 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] -d domname file [file ...]\n"
"  %s [--options] -a disk.img [-a disk.img ...] file [file ...]\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  --echo-keys          Don't turn off echo for passphrases\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  --help               Display brief help\n"
"  --keys-from-stdin    Read passphrases from stdin\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  -x                   Trace libguestfs API calls\n"
"For more information, see the manpage %s(1).\n"
msgstr ""

#: cat/virt-cat.c:358 edit/virt-edit.c:666 fish/fish.c:1586
#, c-format
msgid "%s: to use Windows drive letters, this must be a Windows guest\n"
msgstr ""

#: cat/virt-cat.c:372 edit/virt-edit.c:680
#, c-format
msgid "%s: drive '%c:' not found.\n"
msgstr ""

#: cat/virt-filesystems.c:106
#, c-format
msgid ""
"%s: list filesystems, partitions, block devices, LVM in a VM\n"
"Copyright (C) 2010 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] -d domname\n"
"  %s [--options] -a disk.img [-a disk.img ...]\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  --all                Display everything\n"
"  --blkdevs|--block-devices\n"
"                       Display block devices\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  --csv                Output as Comma-Separated Values\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  --echo-keys          Don't turn off echo for passphrases\n"
"  --extra              Display swap and data filesystems\n"
"  --filesystems        Display mountable filesystems\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  -h|--human-readable  Human-readable sizes in --long output\n"
"  --help               Display brief help\n"
"  --keys-from-stdin    Read passphrases from stdin\n"
"  -l|--long            Long output\n"
"  --lvs|--logvols|--logical-volumes\n"
"                       Display LVM logical volumes\n"
"  --no-title           No title in --long output\n"
"  --parts|--partitions Display partitions\n"
"  --pvs|--physvols|--physical-volumes\n"
"                       Display LVM physical volumes\n"
"  --uuid|--uuids       Add UUIDs to --long output\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  --vgs|--volgroups|--volume-groups\n"
"                       Display LVM volume groups\n"
"  -x                   Trace libguestfs API calls\n"
"For more information, see the manpage %s(1).\n"
msgstr ""

#: cat/virt-filesystems.c:321 cat/virt-ls.c:348 df/main.c:254
#, c-format
msgid "%s: you cannot use -h and --csv options together.\n"
msgstr ""

#: cat/virt-ls.c:105
#, c-format
msgid ""
"%s: list files in a virtual machine\n"
"Copyright (C) 2010-2012 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] -d domname dir [dir ...]\n"
"  %s [--options] -a disk.img [-a disk.img ...] dir [dir ...]\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  --checksum[=...]     Display file checksums\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  --csv                Comma-Separated Values output\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  --echo-keys          Don't turn off echo for passphrases\n"
"  --extra-stats        Display extra stats\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  --help               Display brief help\n"
"  -h|--human-readable  Human-readable sizes in output\n"
"  --keys-from-stdin    Read passphrases from stdin\n"
"  -l|--long            Long listing\n"
"  -R|--recursive       Recursive listing\n"
"  --times              Display file times\n"
"  --time-days          Display file times as days before now\n"
"  --time-relative      Display file times as seconds before now\n"
"  --time-t             Display file times as time_t's\n"
"  --uids               Display UID, GID\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  -x                   Trace libguestfs API calls\n"
"For more information, see the manpage %s(1).\n"
msgstr ""

#: cat/virt-ls.c:339
#, c-format
msgid ""
"%s: used a flag which can only be combined with -lR mode\n"
"For more information, read the virt-ls(1) man page.\n"
msgstr ""

#: cat/virt-ls.c:533
#, c-format
msgid "%s: error getting extended attrs for %s %s\n"
msgstr ""

#: cat/virt-ls.c:543
#, c-format
msgid "%s: error: cannot parse xattr count for %s %s\n"
msgstr ""

#: df/domains.c:290
#, c-format
msgid "%s: ignoring %s, it has too many disks (%zu > %zu)\n"
msgstr ""

#: df/main.c:74
#, c-format
msgid ""
"%s: display free space on virtual filesystems\n"
"Copyright (C) 2010 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] -d domname\n"
"  %s [--options] -a disk.img [-a disk.img ...]\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  --csv                Output as Comma-Separated Values\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  -h|--human-readable  Human-readable sizes in --long output\n"
"  --help               Display brief help\n"
"  -i|--inodes          Display inodes\n"
"  --one-per-guest      Separate appliance per guest\n"
"  --uuid               Add UUIDs to --long output\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  -x                   Trace libguestfs API calls\n"
"For more information, see the manpage %s(1).\n"
msgstr ""

#: df/output.c:51
msgid "VirtualMachine"
msgstr ""

#: df/output.c:52
msgid "Filesystem"
msgstr ""

#: df/output.c:55
msgid "1K-blocks"
msgstr ""

#: df/output.c:57
msgid "Size"
msgstr ""

#: df/output.c:58
msgid "Used"
msgstr ""

#: df/output.c:59
msgid "Available"
msgstr ""

#: df/output.c:60
msgid "Use%"
msgstr ""

#: df/output.c:62
msgid "Inodes"
msgstr ""

#: df/output.c:63
msgid "IUsed"
msgstr ""

#: df/output.c:64
msgid "IFree"
msgstr ""

#: df/output.c:65
msgid "IUse%"
msgstr ""

#: edit/virt-edit.c:79
#, c-format
msgid ""
"%s: Edit a file in a virtual machine\n"
"Copyright (C) 2009-2012 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] -d domname file [file ...]\n"
"  %s [--options] -a disk.img [-a disk.img ...] file [file ...]\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  -b|--backup .ext     Backup original as original.ext\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  --echo-keys          Don't turn off echo for passphrases\n"
"  -e|--expr expr       Non-interactive editing using Perl expr\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  --help               Display brief help\n"
"  --keys-from-stdin    Read passphrases from stdin\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  -x                   Trace libguestfs API calls\n"
"For more information, see the manpage %s(1).\n"
msgstr ""

#: edit/virt-edit.c:177
#, c-format
msgid "%s: -b option given multiple times\n"
msgstr ""

#: edit/virt-edit.c:194
#, c-format
msgid "%s: -e option given multiple times\n"
msgstr ""

#: fish/alloc.c:38
#, c-format
msgid "use 'alloc file size' to create an image\n"
msgstr ""

#: fish/alloc.c:52
#, c-format
msgid "use 'sparse file size' to create a sparse image\n"
msgstr ""

#: fish/alloc.c:76
#, c-format
msgid "can't allocate or add disks after launching\n"
msgstr ""

#: fish/alloc.c:157
#, c-format
msgid "%s: invalid integer parameter (%s returned %d)\n"
msgstr ""

#: fish/cmds.c:3272
msgid "Command"
msgstr ""

#: fish/cmds.c:3272
msgid "Description"
msgstr ""

#: fish/cmds.c:3274
msgid "add a CD-ROM disk image to examine"
msgstr ""

#: fish/cmds.c:3275
msgid "add the disk(s) from a named libvirt domain"
msgstr ""

#: fish/cmds.c:3276
msgid "add an image to examine or modify"
msgstr ""

#: fish/cmds.c:3277
msgid "add a drive in snapshot mode (read-only)"
msgstr ""

#: fish/cmds.c:3278
msgid "add a drive read-only specifying the QEMU block emulation to use"
msgstr ""

#: fish/cmds.c:3279
msgid "add a drive specifying the QEMU block emulation to use"
msgstr ""

#: fish/cmds.c:3280
msgid "allocate and add a disk file"
msgstr ""

#: fish/cmds.c:3281
msgid "clear Augeas path"
msgstr ""

#: fish/cmds.c:3282
msgid "close the current Augeas handle"
msgstr ""

#: fish/cmds.c:3283
msgid "define an Augeas node"
msgstr ""

#: fish/cmds.c:3284
msgid "define an Augeas variable"
msgstr ""

#: fish/cmds.c:3285
msgid "look up the value of an Augeas path"
msgstr ""

#: fish/cmds.c:3286
msgid "create a new Augeas handle"
msgstr ""

#: fish/cmds.c:3287
msgid "insert a sibling Augeas node"
msgstr ""

#: fish/cmds.c:3288
msgid "load files into the tree"
msgstr ""

#: fish/cmds.c:3289
msgid "list Augeas nodes under augpath"
msgstr ""

#: fish/cmds.c:3290
msgid "return Augeas nodes which match augpath"
msgstr ""

#: fish/cmds.c:3291
msgid "move Augeas node"
msgstr ""

#: fish/cmds.c:3292
msgid "remove an Augeas path"
msgstr ""

#: fish/cmds.c:3293
msgid "write all pending Augeas changes to disk"
msgstr ""

#: fish/cmds.c:3294
msgid "set Augeas path to value"
msgstr ""

#: fish/cmds.c:3295
msgid "test availability of some parts of the API"
msgstr ""

#: fish/cmds.c:3296
msgid "return a list of all optional groups"
msgstr ""

#: fish/cmds.c:3297
msgid "upload base64-encoded data to file"
msgstr ""

#: fish/cmds.c:3298
msgid "download file and encode as base64"
msgstr ""

#: fish/cmds.c:3299
msgid "print block device attributes"
msgstr ""

#: fish/cmds.c:3300
msgid "flush device buffers"
msgstr ""

#: fish/cmds.c:3301
msgid "get blocksize of block device"
msgstr ""

#: fish/cmds.c:3302
msgid "is block device set to read-only"
msgstr ""

#: fish/cmds.c:3303
msgid "get total size of device in bytes"
msgstr ""

#: fish/cmds.c:3304
msgid "get sectorsize of block device"
msgstr ""

#: fish/cmds.c:3305
msgid "get total size of device in 512-byte sectors"
msgstr ""

#: fish/cmds.c:3306
msgid "reread partition table"
msgstr ""

#: fish/cmds.c:3307
msgid "set blocksize of block device"
msgstr ""

#: fish/cmds.c:3308
msgid "set block device to read-only"
msgstr ""

#: fish/cmds.c:3309
msgid "set block device to read-write"
msgstr ""

#: fish/cmds.c:3310
msgid "add devices to a btrfs filesystem"
msgstr ""

#: fish/cmds.c:3311
msgid "remove devices from a btrfs filesystem"
msgstr ""

#: fish/cmds.c:3312
msgid "balance a btrfs filesystem"
msgstr ""

#: fish/cmds.c:3313
msgid "resize a btrfs filesystem"
msgstr ""

#: fish/cmds.c:3314
msgid "sync a btrfs filesystem"
msgstr ""

#: fish/cmds.c:3315
msgid "check a btrfs filesystem"
msgstr ""

#: fish/cmds.c:3316
msgid "enable or disable the seeding feature of device"
msgstr ""

#: fish/cmds.c:3317
msgid "create a btrfs snapshot"
msgstr ""

#: fish/cmds.c:3318
msgid "delete a btrfs snapshot"
msgstr ""

#: fish/cmds.c:3319
msgid "list btrfs snapshots and subvolumes"
msgstr ""

#: fish/cmds.c:3320
msgid "set default btrfs subvolume"
msgstr ""

#: fish/cmds.c:3321
msgid "create a writable btrfs snapshot"
msgstr ""

#: fish/cmds.c:3322
msgid "return canonical device name"
msgstr ""

#: fish/cmds.c:3323
msgid "return true path on case-insensitive filesystem"
msgstr ""

#: fish/cmds.c:3324
msgid "list the contents of a file"
msgstr ""

#: fish/cmds.c:3325
msgid "compute MD5, SHAx or CRC checksum of file"
msgstr ""

#: fish/cmds.c:3326
msgid "compute MD5, SHAx or CRC checksum of the contents of a device"
msgstr ""

#: fish/cmds.c:3327
msgid "compute MD5, SHAx or CRC checksum of files in a directory"
msgstr ""

#: fish/cmds.c:3328
msgid "change file mode"
msgstr ""

#: fish/cmds.c:3329 fish/cmds.c:3488
msgid "change file owner and group"
msgstr ""

#: fish/cmds.c:3330
msgid "run a command from the guest filesystem"
msgstr ""

#: fish/cmds.c:3331
msgid "run a command, returning lines"
msgstr ""

#: fish/cmds.c:3332
msgid "output compressed device"
msgstr ""

#: fish/cmds.c:3333
msgid "output compressed file"
msgstr ""

#: fish/cmds.c:3334
msgid "add qemu parameters"
msgstr ""

#: fish/cmds.c:3335
msgid "copy from source device to destination device"
msgstr ""

#: fish/cmds.c:3336
msgid "copy from source device to destination file"
msgstr ""

#: fish/cmds.c:3337
msgid "copy from source file to destination device"
msgstr ""

#: fish/cmds.c:3338
msgid "copy from source file to destination file"
msgstr ""

#: fish/cmds.c:3339
msgid "copy local files or directories into an image"
msgstr ""

#: fish/cmds.c:3340
msgid "copy remote files or directories out of an image"
msgstr ""

#: fish/cmds.c:3341
msgid "copy size bytes from source to destination using dd"
msgstr ""

#: fish/cmds.c:3342
msgid "copy a file"
msgstr ""

#: fish/cmds.c:3343
msgid "copy a file or directory recursively"
msgstr ""

#: fish/cmds.c:3344
msgid "copy from source to destination using dd"
msgstr ""

#: fish/cmds.c:3345
msgid "debugging and internals"
msgstr ""

#: fish/cmds.c:3346
msgid "debug the drives (internal use only)"
msgstr ""

#: fish/cmds.c:3347
msgid "upload a file to the appliance (internal use only)"
msgstr ""

#: fish/cmds.c:3348
msgid "delete a previously registered event handler"
msgstr ""

#: fish/cmds.c:3349
msgid "convert device to index"
msgstr ""

#: fish/cmds.c:3350
msgid "report file system disk space usage"
msgstr ""

#: fish/cmds.c:3351
msgid "report file system disk space usage (human readable)"
msgstr ""

#: fish/cmds.c:3352
msgid "detect the disk format of a disk image"
msgstr ""

#: fish/cmds.c:3353
msgid "return whether disk has a backing file"
msgstr ""

#: fish/cmds.c:3354
msgid "return virtual size of a disk"
msgstr ""

#: fish/cmds.c:3355
msgid "display an image"
msgstr ""

#: fish/cmds.c:3356
msgid "return kernel messages"
msgstr ""

#: fish/cmds.c:3357
msgid "download a file to the local machine"
msgstr ""

#: fish/cmds.c:3358
msgid "download a file to the local machine with offset and size"
msgstr ""

#: fish/cmds.c:3359
msgid "drop kernel page cache, dentries and inodes"
msgstr ""

#: fish/cmds.c:3360
msgid "estimate file space usage"
msgstr ""

#: fish/cmds.c:3361 fish/cmds.c:3362
msgid "check an ext2/ext3 filesystem"
msgstr ""

#: fish/cmds.c:3363
msgid "display a line of text"
msgstr ""

#: fish/cmds.c:3364
msgid "echo arguments back to the client"
msgstr ""

#: fish/cmds.c:3365
msgid "edit a file"
msgstr ""

#: fish/cmds.c:3366 fish/cmds.c:3367 fish/cmds.c:3373 fish/cmds.c:3374
#: fish/cmds.c:3414 fish/cmds.c:3415 fish/cmds.c:3726 fish/cmds.c:3727
#: fish/cmds.c:3732 fish/cmds.c:3733 fish/cmds.c:3735 fish/cmds.c:3736
msgid "return lines matching a pattern"
msgstr ""

#: fish/cmds.c:3368
msgid "test if two files have equal contents"
msgstr ""

#: fish/cmds.c:3369
msgid "register a handler for an event or events"
msgstr ""

#: fish/cmds.c:3370
msgid "test if file or directory exists"
msgstr ""

#: fish/cmds.c:3371 fish/cmds.c:3372
msgid "preallocate a file in the guest filesystem"
msgstr ""

#: fish/cmds.c:3375
msgid "determine file type"
msgstr ""

#: fish/cmds.c:3376
msgid "detect the architecture of a binary file"
msgstr ""

#: fish/cmds.c:3377
msgid "return the size of the file in bytes"
msgstr ""

#: fish/cmds.c:3378
msgid "check if filesystem is available"
msgstr ""

#: fish/cmds.c:3379
msgid "fill a file with octets"
msgstr ""

#: fish/cmds.c:3380
msgid "fill a directory with empty files"
msgstr ""

#: fish/cmds.c:3381
msgid "fill a file with a repeating pattern of bytes"
msgstr ""

#: fish/cmds.c:3382
msgid "find all files and directories"
msgstr ""

#: fish/cmds.c:3383
msgid "find all files and directories, returning NUL-separated list"
msgstr ""

#: fish/cmds.c:3384
msgid "find a filesystem by label"
msgstr ""

#: fish/cmds.c:3385
msgid "find a filesystem by UUID"
msgstr ""

#: fish/cmds.c:3386
msgid "run the filesystem checker"
msgstr ""

#: fish/cmds.c:3387
msgid "trim free space in a filesystem"
msgstr ""

#: fish/cmds.c:3388
msgid "get the additional kernel options"
msgstr ""

#: fish/cmds.c:3389
msgid "get the attach method"
msgstr ""

#: fish/cmds.c:3390
msgid "get autosync mode"
msgstr ""

#: fish/cmds.c:3391
msgid "get direct appliance mode flag"
msgstr ""

#: fish/cmds.c:3392
msgid "get ext2 file attributes of a file"
msgstr ""

#: fish/cmds.c:3393
msgid "get ext2 file generation of a file"
msgstr ""

#: fish/cmds.c:3394
msgid "get the ext2/3/4 filesystem label"
msgstr ""

#: fish/cmds.c:3395
msgid "get the ext2/3/4 filesystem UUID"
msgstr ""

#: fish/cmds.c:3396
msgid "get memory allocated to the qemu subprocess"
msgstr ""

#: fish/cmds.c:3397
msgid "get enable network flag"
msgstr ""

#: fish/cmds.c:3398
msgid "get the search path"
msgstr ""

#: fish/cmds.c:3399
msgid "get process group flag"
msgstr ""

#: fish/cmds.c:3400
msgid "get PID of qemu subprocess"
msgstr ""

#: fish/cmds.c:3401
msgid "get the qemu binary"
msgstr ""

#: fish/cmds.c:3402
msgid "get recovery process enabled flag"
msgstr ""

#: fish/cmds.c:3403
msgid "get SELinux enabled flag"
msgstr ""

#: fish/cmds.c:3404
msgid "get number of virtual CPUs in appliance"
msgstr ""

#: fish/cmds.c:3405
msgid "get the current state"
msgstr ""

#: fish/cmds.c:3406
msgid "get command trace enabled flag"
msgstr ""

#: fish/cmds.c:3407
msgid "get the current umask"
msgstr ""

#: fish/cmds.c:3408
msgid "get verbose mode"
msgstr ""

#: fish/cmds.c:3409
msgid "get SELinux security context"
msgstr ""

#: fish/cmds.c:3410 fish/cmds.c:3489
msgid "get a single extended attribute"
msgstr ""

#: fish/cmds.c:3411 fish/cmds.c:3490
msgid "list extended attributes of a file or directory"
msgstr ""

#: fish/cmds.c:3412
msgid "expand wildcards in command"
msgstr ""

#: fish/cmds.c:3413
msgid "expand a wildcard path"
msgstr ""

#: fish/cmds.c:3416
msgid "install GRUB 1"
msgstr ""

#: fish/cmds.c:3417
msgid "return first 10 lines of a file"
msgstr ""

#: fish/cmds.c:3418
msgid "return first N lines of a file"
msgstr ""

#: fish/cmds.c:3419
msgid "dump a file in hexadecimal"
msgstr ""

#: fish/cmds.c:3420
msgid "edit with a hex editor"
msgstr ""

#: fish/cmds.c:3421
msgid "close the current hivex handle"
msgstr ""

#: fish/cmds.c:3422
msgid "commit (write) changes back to the hive"
msgstr ""

#: fish/cmds.c:3423
msgid "add a child node"
msgstr ""

#: fish/cmds.c:3424
msgid "return list of nodes which are subkeys of node"
msgstr ""

#: fish/cmds.c:3425
msgid "delete a node (recursively)"
msgstr ""

#: fish/cmds.c:3426
msgid "return the named child of node"
msgstr ""

#: fish/cmds.c:3427
msgid "return the named value"
msgstr ""

#: fish/cmds.c:3428
msgid "return the name of the node"
msgstr ""

#: fish/cmds.c:3429
msgid "return the parent of node"
msgstr ""

#: fish/cmds.c:3430
msgid "set or replace a single value in a node"
msgstr ""

#: fish/cmds.c:3431
msgid "return list of values attached to node"
msgstr ""

#: fish/cmds.c:3432
msgid "open a Windows Registry hive file"
msgstr ""

#: fish/cmds.c:3433
msgid "return the root node of the hive"
msgstr ""

#: fish/cmds.c:3434
msgid "return the key field from the (key, datatype, data) tuple"
msgstr ""

#: fish/cmds.c:3435
msgid "return the data type from the (key, datatype, data) tuple"
msgstr ""

#: fish/cmds.c:3436 fish/cmds.c:3437
msgid "return the data field from the (key, datatype, data) tuple"
msgstr ""

#: fish/cmds.c:3438
msgid "list the contents of a single file in an initrd"
msgstr ""

#: fish/cmds.c:3439
msgid "list files in an initrd"
msgstr ""

#: fish/cmds.c:3440
msgid "add an inotify watch"
msgstr ""

#: fish/cmds.c:3441
msgid "close the inotify handle"
msgstr ""

#: fish/cmds.c:3442
msgid "return list of watched files that had events"
msgstr ""

#: fish/cmds.c:3443
msgid "create an inotify handle"
msgstr ""

#: fish/cmds.c:3444
msgid "return list of inotify events"
msgstr ""

#: fish/cmds.c:3445
msgid "remove an inotify watch"
msgstr ""

#: fish/cmds.c:3446
msgid "get architecture of inspected operating system"
msgstr ""

#: fish/cmds.c:3447
msgid "get distro of inspected operating system"
msgstr ""

#: fish/cmds.c:3448
msgid "get drive letter mappings"
msgstr ""

#: fish/cmds.c:3449
msgid "get filesystems associated with inspected operating system"
msgstr ""

#: fish/cmds.c:3450
msgid "get format of inspected operating system"
msgstr ""

#: fish/cmds.c:3451
msgid "get hostname of the operating system"
msgstr ""

#: fish/cmds.c:3452
msgid "get the icon corresponding to this operating system"
msgstr ""

#: fish/cmds.c:3453
msgid "get major version of inspected operating system"
msgstr ""

#: fish/cmds.c:3454
msgid "get minor version of inspected operating system"
msgstr ""

#: fish/cmds.c:3455
msgid "get mountpoints of inspected operating system"
msgstr ""

#: fish/cmds.c:3456
msgid "get package format used by the operating system"
msgstr ""

#: fish/cmds.c:3457
msgid "get package management tool used by the operating system"
msgstr ""

#: fish/cmds.c:3458
msgid "get product name of inspected operating system"
msgstr ""

#: fish/cmds.c:3459
msgid "get product variant of inspected operating system"
msgstr ""

#: fish/cmds.c:3460
msgid "return list of operating systems found by last inspection"
msgstr ""

#: fish/cmds.c:3461
msgid "get type of inspected operating system"
msgstr ""

#: fish/cmds.c:3462
msgid "get Windows CurrentControlSet of inspected operating system"
msgstr ""

#: fish/cmds.c:3463
msgid "get Windows systemroot of inspected operating system"
msgstr ""

#: fish/cmds.c:3464
msgid "get live flag for install disk"
msgstr ""

#: fish/cmds.c:3465
msgid "get multipart flag for install disk"
msgstr ""

#: fish/cmds.c:3466
msgid "get netinst (network installer) flag for install disk"
msgstr ""

#: fish/cmds.c:3467
msgid "get list of applications installed in the operating system"
msgstr ""

#: fish/cmds.c:3468
msgid "inspect disk and return list of operating systems found"
msgstr ""

#: fish/cmds.c:3469
msgid "test if block device"
msgstr ""

#: fish/cmds.c:3470
msgid "is busy processing a command"
msgstr ""

#: fish/cmds.c:3471
msgid "test if character device"
msgstr ""

#: fish/cmds.c:3472
msgid "is in configuration state"
msgstr ""

#: fish/cmds.c:3473
msgid "test if a directory"
msgstr ""

#: fish/cmds.c:3474
msgid "test if FIFO (named pipe)"
msgstr ""

#: fish/cmds.c:3475
msgid "test if a regular file"
msgstr ""

#: fish/cmds.c:3476
msgid "is launching subprocess"
msgstr ""

#: fish/cmds.c:3477
msgid "test if device is a logical volume"
msgstr ""

#: fish/cmds.c:3478
msgid "is ready to accept commands"
msgstr ""

#: fish/cmds.c:3479
msgid "test if socket"
msgstr ""

#: fish/cmds.c:3480
msgid "test if symbolic link"
msgstr ""

#: fish/cmds.c:3481
msgid "test if a file contains all zero bytes"
msgstr ""

#: fish/cmds.c:3482
msgid "test if a device contains all zero bytes"
msgstr ""

#: fish/cmds.c:3483
msgid "get ISO information from primary volume descriptor of ISO file"
msgstr ""

#: fish/cmds.c:3484
msgid "get ISO information from primary volume descriptor of device"
msgstr ""

#: fish/cmds.c:3485
msgid "kill the qemu subprocess"
msgstr ""

#: fish/cmds.c:3486
msgid "launch the qemu subprocess"
msgstr ""

#: fish/cmds.c:3487
msgid "change working directory"
msgstr ""

#: fish/cmds.c:3491
msgid "list 9p filesystems"
msgstr ""

#: fish/cmds.c:3492
msgid "list the block devices"
msgstr ""

#: fish/cmds.c:3493
msgid "list device mapper devices"
msgstr ""

#: fish/cmds.c:3494
msgid "list event handlers"
msgstr ""

#: fish/cmds.c:3495
msgid "list filesystems"
msgstr ""

#: fish/cmds.c:3496
msgid "list Linux md (RAID) devices"
msgstr ""

#: fish/cmds.c:3497
msgid "list the partitions"
msgstr ""

#: fish/cmds.c:3498
msgid "list the files in a directory (long format)"
msgstr ""

#: fish/cmds.c:3499
msgid "list the files in a directory (long format with SELinux contexts)"
msgstr ""

#: fish/cmds.c:3500 fish/cmds.c:3501
msgid "create a hard link"
msgstr ""

#: fish/cmds.c:3502 fish/cmds.c:3503
msgid "create a symbolic link"
msgstr ""

#: fish/cmds.c:3504 fish/cmds.c:3612
msgid "remove extended attribute of a file or directory"
msgstr ""

#: fish/cmds.c:3505
msgid "list the files in a directory"
msgstr ""

#: fish/cmds.c:3506
msgid "get list of files in a directory"
msgstr ""

#: fish/cmds.c:3507 fish/cmds.c:3648
msgid "set extended attribute of a file or directory"
msgstr ""

#: fish/cmds.c:3508
msgid "get file information for a symbolic link"
msgstr ""

#: fish/cmds.c:3509
msgid "lstat on multiple files"
msgstr ""

#: fish/cmds.c:3510
msgid "add a key on a LUKS encrypted device"
msgstr ""

#: fish/cmds.c:3511
msgid "close a LUKS device"
msgstr ""

#: fish/cmds.c:3512 fish/cmds.c:3513
msgid "format a block device as a LUKS encrypted device"
msgstr ""

#: fish/cmds.c:3514
msgid "remove a key from a LUKS encrypted device"
msgstr ""

#: fish/cmds.c:3515
msgid "open a LUKS-encrypted block device"
msgstr ""

#: fish/cmds.c:3516
msgid "open a LUKS-encrypted block device read-only"
msgstr ""

#: fish/cmds.c:3517
msgid "create an LVM logical volume"
msgstr ""

#: fish/cmds.c:3518
msgid "create an LVM logical volume in % remaining free space"
msgstr ""

#: fish/cmds.c:3519
msgid "get canonical name of an LV"
msgstr ""

#: fish/cmds.c:3520
msgid "clear LVM device filter"
msgstr ""

#: fish/cmds.c:3521
msgid "remove all LVM LVs, VGs and PVs"
msgstr ""

#: fish/cmds.c:3522
msgid "set LVM device filter"
msgstr ""

#: fish/cmds.c:3523
msgid "remove an LVM logical volume"
msgstr ""

#: fish/cmds.c:3524
msgid "rename an LVM logical volume"
msgstr ""

#: fish/cmds.c:3525
msgid "resize an LVM logical volume"
msgstr ""

#: fish/cmds.c:3526
msgid "expand an LV to fill free space"
msgstr ""

#: fish/cmds.c:3527 fish/cmds.c:3528
msgid "list the LVM logical volumes (LVs)"
msgstr ""

#: fish/cmds.c:3529
msgid "get the UUID of a logical volume"
msgstr ""

#: fish/cmds.c:3530
msgid "lgetxattr on multiple files"
msgstr ""

#: fish/cmds.c:3531
msgid "open the manual"
msgstr ""

#: fish/cmds.c:3532
msgid "maximum number of disks that may be added"
msgstr ""

#: fish/cmds.c:3533
msgid "create a Linux md (RAID) device"
msgstr ""

#: fish/cmds.c:3534
msgid "obtain metadata for an MD device"
msgstr ""

#: fish/cmds.c:3535
msgid "get underlying devices from an MD device"
msgstr ""

#: fish/cmds.c:3536
msgid "stop a Linux md (RAID) device"
msgstr ""

#: fish/cmds.c:3537
msgid "create a directory"
msgstr ""

#: fish/cmds.c:3538
msgid "create a directory with a particular mode"
msgstr ""

#: fish/cmds.c:3539
msgid "create a directory and parents"
msgstr ""

#: fish/cmds.c:3540
msgid "create a temporary directory"
msgstr ""

#: fish/cmds.c:3541 fish/cmds.c:3542 fish/cmds.c:3543
msgid "make ext2/3/4 filesystem with external journal"
msgstr ""

#: fish/cmds.c:3544
msgid "make ext2/3/4 external journal"
msgstr ""

#: fish/cmds.c:3545
msgid "make ext2/3/4 external journal with label"
msgstr ""

#: fish/cmds.c:3546
msgid "make ext2/3/4 external journal with UUID"
msgstr ""

#: fish/cmds.c:3547
msgid "make FIFO (named pipe)"
msgstr ""

#: fish/cmds.c:3548
msgid "make a filesystem"
msgstr ""

#: fish/cmds.c:3549
msgid "make a filesystem with block size"
msgstr ""

#: fish/cmds.c:3550
msgid "create a btrfs filesystem"
msgstr ""

#: fish/cmds.c:3551
msgid "create a mountpoint"
msgstr ""

#: fish/cmds.c:3552
msgid "make block, character or FIFO devices"
msgstr ""

#: fish/cmds.c:3553
msgid "make block device node"
msgstr ""

#: fish/cmds.c:3554
msgid "make char device node"
msgstr ""

#: fish/cmds.c:3555
msgid "create a swap partition"
msgstr ""

#: fish/cmds.c:3556
msgid "create a swap partition with a label"
msgstr ""

#: fish/cmds.c:3557
msgid "create a swap partition with an explicit UUID"
msgstr ""

#: fish/cmds.c:3558
msgid "create a swap file"
msgstr ""

#: fish/cmds.c:3559
msgid "load a kernel module"
msgstr ""

#: fish/cmds.c:3560
msgid "view a file"
msgstr ""

#: fish/cmds.c:3561
msgid "mount a guest disk at a position in the filesystem"
msgstr ""

#: fish/cmds.c:3562
msgid "mount 9p filesystem"
msgstr ""

#: fish/cmds.c:3563
msgid "mount on the local filesystem"
msgstr ""

#: fish/cmds.c:3564
msgid "run main loop of mount on the local filesystem"
msgstr ""

#: fish/cmds.c:3565
msgid "mount a file using the loop device"
msgstr ""

#: fish/cmds.c:3566
msgid "mount a guest disk with mount options"
msgstr ""

#: fish/cmds.c:3567
msgid "mount a guest disk, read-only"
msgstr ""

#: fish/cmds.c:3568
msgid "mount a guest disk with mount options and vfstype"
msgstr ""

#: fish/cmds.c:3569
msgid "show mountpoints"
msgstr ""

#: fish/cmds.c:3570
msgid "show mounted filesystems"
msgstr ""

#: fish/cmds.c:3571
msgid "move a file"
msgstr ""

#: fish/cmds.c:3572
msgid "return number of whole block devices (disks) added"
msgstr ""

#: fish/cmds.c:3573
msgid "probe NTFS volume"
msgstr ""

#: fish/cmds.c:3574
msgid "restore NTFS from backup file"
msgstr ""

#: fish/cmds.c:3575
msgid "save NTFS to backup file"
msgstr ""

#: fish/cmds.c:3576
msgid "fix common errors and force Windows to check NTFS"
msgstr ""

#: fish/cmds.c:3577
msgid "resize an NTFS filesystem"
msgstr ""

#: fish/cmds.c:3578
msgid "resize an NTFS filesystem (with size)"
msgstr ""

#: fish/cmds.c:3579
msgid "add a partition to the device"
msgstr ""

#: fish/cmds.c:3580
msgid "delete a partition"
msgstr ""

#: fish/cmds.c:3581
msgid "partition whole disk with a single primary partition"
msgstr ""

#: fish/cmds.c:3582
msgid "return true if a partition is bootable"
msgstr ""

#: fish/cmds.c:3583
msgid "get the MBR type byte (ID byte) from a partition"
msgstr ""

#: fish/cmds.c:3584
msgid "get the partition table type"
msgstr ""

#: fish/cmds.c:3585
msgid "create an empty partition table"
msgstr ""

#: fish/cmds.c:3586
msgid "list partitions on a device"
msgstr ""

#: fish/cmds.c:3587
msgid "make a partition bootable"
msgstr ""

#: fish/cmds.c:3588
msgid "set the MBR type byte (ID byte) of a partition"
msgstr ""

#: fish/cmds.c:3589
msgid "set partition name"
msgstr ""

#: fish/cmds.c:3590
msgid "convert partition name to device name"
msgstr ""

#: fish/cmds.c:3591
msgid "convert partition name to partition number"
msgstr ""

#: fish/cmds.c:3592
msgid "ping the guest daemon"
msgstr ""

#: fish/cmds.c:3593
msgid "read part of a file"
msgstr ""

#: fish/cmds.c:3594
msgid "read part of a device"
msgstr ""

#: fish/cmds.c:3595
msgid "generate a new random UUID for a physical volume"
msgstr ""

#: fish/cmds.c:3596
msgid "generate new random UUIDs for all physical volumes"
msgstr ""

#: fish/cmds.c:3597
msgid "create an LVM physical volume"
msgstr ""

#: fish/cmds.c:3598
msgid "remove an LVM physical volume"
msgstr ""

#: fish/cmds.c:3599
msgid "resize an LVM physical volume"
msgstr ""

#: fish/cmds.c:3600
msgid "resize an LVM physical volume (with size)"
msgstr ""

#: fish/cmds.c:3601 fish/cmds.c:3602
msgid "list the LVM physical volumes (PVs)"
msgstr ""

#: fish/cmds.c:3603
msgid "get the UUID of a physical volume"
msgstr ""

#: fish/cmds.c:3604
msgid "write to part of a file"
msgstr ""

#: fish/cmds.c:3605
msgid "write to part of a device"
msgstr ""

#: fish/cmds.c:3606
msgid "read a file"
msgstr ""

#: fish/cmds.c:3607
msgid "read file as lines"
msgstr ""

#: fish/cmds.c:3608
msgid "read directories entries"
msgstr ""

#: fish/cmds.c:3609
msgid "read the target of a symbolic link"
msgstr ""

#: fish/cmds.c:3610
msgid "readlink on multiple files"
msgstr ""

#: fish/cmds.c:3611
msgid "canonicalized absolute pathname"
msgstr ""

#: fish/cmds.c:3613
msgid "close and reopen libguestfs handle"
msgstr ""

#: fish/cmds.c:3614
msgid "resize an ext2, ext3 or ext4 filesystem"
msgstr ""

#: fish/cmds.c:3615
msgid "resize an ext2, ext3 or ext4 filesystem to the minimum size"
msgstr ""

#: fish/cmds.c:3616
msgid "resize an ext2, ext3 or ext4 filesystem (with size)"
msgstr ""

#: fish/cmds.c:3617
msgid "remove a file"
msgstr ""

#: fish/cmds.c:3618
msgid "remove a file or directory recursively"
msgstr ""

#: fish/cmds.c:3619
msgid "remove a directory"
msgstr ""

#: fish/cmds.c:3620
msgid "remove a mountpoint"
msgstr ""

#: fish/cmds.c:3621
msgid "synchronize the contents of two directories"
msgstr ""

#: fish/cmds.c:3622
msgid "synchronize host or remote filesystem with filesystem"
msgstr ""

#: fish/cmds.c:3623
msgid "synchronize filesystem with host or remote filesystem"
msgstr ""

#: fish/cmds.c:3624
msgid "scrub (securely wipe) a device"
msgstr ""

#: fish/cmds.c:3625
msgid "scrub (securely wipe) a file"
msgstr ""

#: fish/cmds.c:3626
msgid "scrub (securely wipe) free space"
msgstr ""

#: fish/cmds.c:3627
msgid "add options to kernel command line"
msgstr ""

#: fish/cmds.c:3628
msgid "set the attach method"
msgstr ""

#: fish/cmds.c:3629
msgid "set autosync mode"
msgstr ""

#: fish/cmds.c:3630
msgid "enable or disable direct appliance mode"
msgstr ""

#: fish/cmds.c:3631
msgid "set ext2 file attributes of a file"
msgstr ""

#: fish/cmds.c:3632
msgid "set ext2 file generation of a file"
msgstr ""

#: fish/cmds.c:3633
msgid "set the ext2/3/4 filesystem label"
msgstr ""

#: fish/cmds.c:3634
msgid "set the ext2/3/4 filesystem UUID"
msgstr ""

#: fish/cmds.c:3635
msgid "set filesystem label"
msgstr ""

#: fish/cmds.c:3636
msgid "set memory allocated to the qemu subprocess"
msgstr ""

#: fish/cmds.c:3637
msgid "set enable network flag"
msgstr ""

#: fish/cmds.c:3638
msgid "set the search path"
msgstr ""

#: fish/cmds.c:3639
msgid "set process group flag"
msgstr ""

#: fish/cmds.c:3640
msgid "set the qemu binary"
msgstr ""

#: fish/cmds.c:3641
msgid "enable or disable the recovery process"
msgstr ""

#: fish/cmds.c:3642
msgid "set SELinux enabled or disabled at appliance boot"
msgstr ""

#: fish/cmds.c:3643
msgid "set number of virtual CPUs in appliance"
msgstr ""

#: fish/cmds.c:3644
msgid "enable or disable command traces"
msgstr ""

#: fish/cmds.c:3645
msgid "set verbose mode"
msgstr ""

#: fish/cmds.c:3646
msgid "set SELinux security context"
msgstr ""

#: fish/cmds.c:3647
msgid "set an environment variable"
msgstr ""

#: fish/cmds.c:3649 fish/cmds.c:3650
msgid "create partitions on a block device"
msgstr ""

#: fish/cmds.c:3651
msgid "modify a single partition on a block device"
msgstr ""

#: fish/cmds.c:3652
msgid "display the disk geometry from the partition table"
msgstr ""

#: fish/cmds.c:3653
msgid "display the kernel geometry"
msgstr ""

#: fish/cmds.c:3654
msgid "display the partition table"
msgstr ""

#: fish/cmds.c:3655
msgid "run a command via the shell"
msgstr ""

#: fish/cmds.c:3656
msgid "run a command via the shell returning lines"
msgstr ""

#: fish/cmds.c:3657
msgid "shutdown the qemu subprocess"
msgstr ""

#: fish/cmds.c:3658
msgid "sleep for some seconds"
msgstr ""

#: fish/cmds.c:3659
msgid "create a sparse disk image and add"
msgstr ""

#: fish/cmds.c:3660
msgid "get file information"
msgstr ""

#: fish/cmds.c:3661
msgid "get file system statistics"
msgstr ""

#: fish/cmds.c:3662 fish/cmds.c:3663
msgid "print the printable strings in a file"
msgstr ""

#: fish/cmds.c:3664
msgid "list supported groups of commands"
msgstr ""

#: fish/cmds.c:3665
msgid "disable swap on device"
msgstr ""

#: fish/cmds.c:3666
msgid "disable swap on file"
msgstr ""

#: fish/cmds.c:3667
msgid "disable swap on labeled swap partition"
msgstr ""

#: fish/cmds.c:3668
msgid "disable swap on swap partition by UUID"
msgstr ""

#: fish/cmds.c:3669
msgid "enable swap on device"
msgstr ""

#: fish/cmds.c:3670
msgid "enable swap on file"
msgstr ""

#: fish/cmds.c:3671
msgid "enable swap on labeled swap partition"
msgstr ""

#: fish/cmds.c:3672
msgid "enable swap on swap partition by UUID"
msgstr ""

#: fish/cmds.c:3673
msgid "sync disks, writes are flushed through to the disk image"
msgstr ""

#: fish/cmds.c:3674
msgid "return last 10 lines of a file"
msgstr ""

#: fish/cmds.c:3675
msgid "return last N lines of a file"
msgstr ""

#: fish/cmds.c:3676
msgid "unpack tarfile to directory"
msgstr ""

#: fish/cmds.c:3677
msgid "pack directory into tarfile"
msgstr ""

#: fish/cmds.c:3678 fish/cmds.c:3686
msgid "unpack compressed tarball to directory"
msgstr ""

#: fish/cmds.c:3679 fish/cmds.c:3687
msgid "pack directory into compressed tarball"
msgstr ""

#: fish/cmds.c:3680
msgid "print elapsed time taken to run a command"
msgstr ""

#: fish/cmds.c:3681
msgid "update file timestamps or create a new file"
msgstr ""

#: fish/cmds.c:3682
msgid "truncate a file to zero size"
msgstr ""

#: fish/cmds.c:3683
msgid "truncate a file to a particular size"
msgstr ""

#: fish/cmds.c:3684
msgid "adjust ext2/ext3/ext4 filesystem parameters"
msgstr ""

#: fish/cmds.c:3685
msgid "get ext2/ext3/ext4 superblock details"
msgstr ""

#: fish/cmds.c:3688
msgid "set file mode creation mask (umask)"
msgstr ""

#: fish/cmds.c:3689
msgid "unmount a filesystem"
msgstr ""

#: fish/cmds.c:3690
msgid "unmount all filesystems"
msgstr ""

#: fish/cmds.c:3691
msgid "unmount a locally mounted filesystem"
msgstr ""

#: fish/cmds.c:3692
msgid "unset an environment variable"
msgstr ""

#: fish/cmds.c:3693
msgid "upload a file from the local machine"
msgstr ""

#: fish/cmds.c:3694
msgid "upload a file from the local machine with offset"
msgstr ""

#: fish/cmds.c:3695
msgid "set timestamp of a file with nanosecond precision"
msgstr ""

#: fish/cmds.c:3696
msgid "appliance kernel version"
msgstr ""

#: fish/cmds.c:3697
msgid "get the library version number"
msgstr ""

#: fish/cmds.c:3698
msgid "get the filesystem label"
msgstr ""

#: fish/cmds.c:3699
msgid "get the Linux VFS type corresponding to a mounted device"
msgstr ""

#: fish/cmds.c:3700
msgid "get the filesystem UUID"
msgstr ""

#: fish/cmds.c:3701
msgid "activate or deactivate some volume groups"
msgstr ""

#: fish/cmds.c:3702
msgid "activate or deactivate all volume groups"
msgstr ""

#: fish/cmds.c:3703
msgid "generate a new random UUID for a volume group"
msgstr ""

#: fish/cmds.c:3704
msgid "generate new random UUIDs for all volume groups"
msgstr ""

#: fish/cmds.c:3705
msgid "create an LVM volume group"
msgstr ""

#: fish/cmds.c:3706
msgid "get the LV UUIDs of all LVs in the volume group"
msgstr ""

#: fish/cmds.c:3707
msgid "get volume group metadata"
msgstr ""

#: fish/cmds.c:3708
msgid "get the PV UUIDs containing the volume group"
msgstr ""

#: fish/cmds.c:3709
msgid "remove an LVM volume group"
msgstr ""

#: fish/cmds.c:3710
msgid "rename an LVM volume group"
msgstr ""

#: fish/cmds.c:3711 fish/cmds.c:3712
msgid "list the LVM volume groups (VGs)"
msgstr ""

#: fish/cmds.c:3713
msgid "rescan for LVM physical volumes, volume groups and logical volumes"
msgstr ""

#: fish/cmds.c:3714
msgid "get the UUID of a volume group"
msgstr ""

#: fish/cmds.c:3715
msgid "count characters in a file"
msgstr ""

#: fish/cmds.c:3716
msgid "count lines in a file"
msgstr ""

#: fish/cmds.c:3717
msgid "count words in a file"
msgstr ""

#: fish/cmds.c:3718
msgid "wipe a filesystem signature from a device"
msgstr ""

#: fish/cmds.c:3719
msgid "create a new file"
msgstr ""

#: fish/cmds.c:3720
msgid "append content to end of file"
msgstr ""

#: fish/cmds.c:3721
msgid "create a file"
msgstr ""

#: fish/cmds.c:3722
msgid "change parameters of an XFS filesystem"
msgstr ""

#: fish/cmds.c:3723
msgid "expand an existing XFS filesystem"
msgstr ""

#: fish/cmds.c:3724
msgid "get geometry of XFS filesystem"
msgstr ""

#: fish/cmds.c:3725
msgid "repair an XFS filesystem"
msgstr ""

#: fish/cmds.c:3728
msgid "write zeroes to the device"
msgstr ""

#: fish/cmds.c:3729
msgid "write zeroes to an entire device"
msgstr ""

#: fish/cmds.c:3730
msgid "zero free space in a filesystem"
msgstr ""

#: fish/cmds.c:3731
msgid "zero unused inodes and disk blocks on ext2/3 filesystem"
msgstr ""

#: fish/cmds.c:3734
msgid "determine file type inside a compressed file"
msgstr ""

#: fish/cmds.c:3737
msgid "Use -h <cmd> / help <cmd> to show detailed help for a command."
msgstr ""

#: fish/cmds.c:4241 fish/cmds.c:4260 fish/cmds.c:4281 fish/cmds.c:4303
#: fish/cmds.c:4326 fish/cmds.c:4350 fish/cmds.c:4371 fish/cmds.c:4393
#: fish/cmds.c:4414 fish/cmds.c:4436 fish/cmds.c:4457 fish/cmds.c:4477
#: fish/cmds.c:4497 fish/cmds.c:4519 fish/cmds.c:4539 fish/cmds.c:4559
#: fish/cmds.c:4579 fish/cmds.c:4599 fish/cmds.c:4619 fish/cmds.c:4639
#: fish/cmds.c:4661 fish/cmds.c:4700 fish/cmds.c:4720 fish/cmds.c:4740
#: fish/cmds.c:4763 fish/cmds.c:4783 fish/cmds.c:4805 fish/cmds.c:4825
#: fish/cmds.c:4847 fish/cmds.c:4867 fish/cmds.c:4889 fish/cmds.c:4909
#: fish/cmds.c:4932 fish/cmds.c:4956 fish/cmds.c:4979 fish/cmds.c:5004
#: fish/cmds.c:5027 fish/cmds.c:5051 fish/cmds.c:5075 fish/cmds.c:5099
#: fish/cmds.c:5122 fish/cmds.c:5145 fish/cmds.c:5169 fish/cmds.c:5193
#: fish/cmds.c:5217 fish/cmds.c:5237 fish/cmds.c:5257 fish/cmds.c:5343
#: fish/cmds.c:5365 fish/cmds.c:5386 fish/cmds.c:5483 fish/cmds.c:5507
#: fish/cmds.c:5531 fish/cmds.c:5555 fish/cmds.c:5579 fish/cmds.c:5603
#: fish/cmds.c:5626 fish/cmds.c:5649 fish/cmds.c:5672 fish/cmds.c:5692
#: fish/cmds.c:5715 fish/cmds.c:5739 fish/cmds.c:5763 fish/cmds.c:5847
#: fish/cmds.c:5867 fish/cmds.c:5889 fish/cmds.c:5928 fish/cmds.c:6029
#: fish/cmds.c:6094 fish/cmds.c:6116 fish/cmds.c:6138 fish/cmds.c:6159
#: fish/cmds.c:6186 fish/cmds.c:6214 fish/cmds.c:6245 fish/cmds.c:6274
#: fish/cmds.c:6304 fish/cmds.c:6333 fish/cmds.c:6365 fish/cmds.c:6397
#: fish/cmds.c:6428 fish/cmds.c:6455 fish/cmds.c:6492 fish/cmds.c:6516
#: fish/cmds.c:6539 fish/cmds.c:6563 fish/cmds.c:6584 fish/cmds.c:6605
#: fish/cmds.c:6630 fish/cmds.c:6655 fish/cmds.c:6676 fish/cmds.c:6697
#: fish/cmds.c:6718 fish/cmds.c:6739 fish/cmds.c:6760 fish/cmds.c:6781
#: fish/cmds.c:6802 fish/cmds.c:6826 fish/cmds.c:6869 fish/cmds.c:6891
#: fish/cmds.c:6918 fish/cmds.c:6944 fish/cmds.c:6969 fish/cmds.c:6994
#: fish/cmds.c:7018 fish/cmds.c:7042 fish/cmds.c:7065 fish/cmds.c:7087
#: fish/cmds.c:7106 fish/cmds.c:7127 fish/cmds.c:7151 fish/cmds.c:7176
#: fish/cmds.c:7201 fish/cmds.c:7226 fish/cmds.c:7251 fish/cmds.c:7277
#: fish/cmds.c:7324 fish/cmds.c:7389 fish/cmds.c:7415 fish/cmds.c:7441
#: fish/cmds.c:7467 fish/cmds.c:7490 fish/cmds.c:7518 fish/cmds.c:7565
#: fish/cmds.c:7653 fish/cmds.c:7753 fish/cmds.c:7774 fish/cmds.c:7793
#: fish/cmds.c:7814 fish/cmds.c:7841 fish/cmds.c:7868 fish/cmds.c:7895
#: fish/cmds.c:7922 fish/cmds.c:7949 fish/cmds.c:7976 fish/cmds.c:8000
#: fish/cmds.c:8022 fish/cmds.c:8044 fish/cmds.c:8067 fish/cmds.c:8090
#: fish/cmds.c:8114 fish/cmds.c:8156 fish/cmds.c:8179 fish/cmds.c:8202
#: fish/cmds.c:8224 fish/cmds.c:8247 fish/cmds.c:8277 fish/cmds.c:8307
#: fish/cmds.c:8459 fish/cmds.c:8489 fish/cmds.c:8519 fish/cmds.c:8544
#: fish/cmds.c:8571 fish/cmds.c:8597 fish/cmds.c:8625 fish/cmds.c:8647
#: fish/cmds.c:8669 fish/cmds.c:8692 fish/cmds.c:8715 fish/cmds.c:8740
#: fish/cmds.c:8763 fish/cmds.c:8788 fish/cmds.c:8812 fish/cmds.c:8835
#: fish/cmds.c:8862 fish/cmds.c:8892 fish/cmds.c:8922 fish/cmds.c:8951
#: fish/cmds.c:8990 fish/cmds.c:9011 fish/cmds.c:9033 fish/cmds.c:9063
#: fish/cmds.c:9091 fish/cmds.c:9119 fish/cmds.c:9146 fish/cmds.c:9168
#: fish/cmds.c:9195 fish/cmds.c:9298 fish/cmds.c:9322 fish/cmds.c:9346
#: fish/cmds.c:9370 fish/cmds.c:9393 fish/cmds.c:9420 fish/cmds.c:9462
#: fish/cmds.c:9484 fish/cmds.c:9506 fish/cmds.c:9548 fish/cmds.c:9572
#: fish/cmds.c:9596 fish/cmds.c:9620 fish/cmds.c:9647 fish/cmds.c:9669
#: fish/cmds.c:9694 fish/cmds.c:9719 fish/cmds.c:9746 fish/cmds.c:9772
#: fish/cmds.c:9798 fish/cmds.c:9824 fish/cmds.c:9852 fish/cmds.c:9899
#: fish/cmds.c:9927 fish/cmds.c:9972 fish/cmds.c:9993 fish/cmds.c:10016
#: fish/cmds.c:10042 fish/cmds.c:10070 fish/cmds.c:10153 fish/cmds.c:10177
#: fish/cmds.c:10203 fish/cmds.c:10289 fish/cmds.c:10337 fish/cmds.c:10425
#: fish/cmds.c:10510 fish/cmds.c:10552 fish/cmds.c:10580 fish/cmds.c:10607
#: fish/cmds.c:10635 fish/cmds.c:10662 fish/cmds.c:10692 fish/cmds.c:10742
#: fish/cmds.c:10790 fish/cmds.c:10817 fish/cmds.c:10841 fish/cmds.c:10864
#: fish/cmds.c:10886 fish/cmds.c:10979 fish/cmds.c:11008 fish/cmds.c:11037
#: fish/cmds.c:11066 fish/cmds.c:11095 fish/cmds.c:11124 fish/cmds.c:11153
#: fish/cmds.c:11182 fish/cmds.c:11211 fish/cmds.c:11240 fish/cmds.c:11269
#: fish/cmds.c:11297 fish/cmds.c:11325 fish/cmds.c:11352 fish/cmds.c:11379
#: fish/cmds.c:11406 fish/cmds.c:11432 fish/cmds.c:11460 fish/cmds.c:11505
#: fish/cmds.c:11527 fish/cmds.c:11549 fish/cmds.c:11574 fish/cmds.c:11599
#: fish/cmds.c:11621 fish/cmds.c:11643 fish/cmds.c:11665 fish/cmds.c:11687
#: fish/cmds.c:11712 fish/cmds.c:11754 fish/cmds.c:11800 fish/cmds.c:11839
#: fish/cmds.c:11860 fish/cmds.c:11881 fish/cmds.c:11902 fish/cmds.c:11922
#: fish/cmds.c:11947 fish/cmds.c:11991 fish/cmds.c:12035 fish/cmds.c:12080
#: fish/cmds.c:12126 fish/cmds.c:12173 fish/cmds.c:12220 fish/cmds.c:12264
#: fish/cmds.c:12286 fish/cmds.c:12314 fish/cmds.c:12343 fish/cmds.c:12370
#: fish/cmds.c:12394 fish/cmds.c:12420 fish/cmds.c:12463 fish/cmds.c:12545
#: fish/cmds.c:12592 fish/cmds.c:12660 fish/cmds.c:12726 fish/cmds.c:12752
#: fish/cmds.c:12804 fish/cmds.c:12829 fish/cmds.c:12874 fish/cmds.c:12917
#: fish/cmds.c:12941 fish/cmds.c:12967 fish/cmds.c:13032 fish/cmds.c:13058
#: fish/cmds.c:13087 fish/cmds.c:13114 fish/cmds.c:13138 fish/cmds.c:13163
#: fish/cmds.c:13195 fish/cmds.c:13219 fish/cmds.c:13243 fish/cmds.c:13267
#: fish/cmds.c:13291 fish/cmds.c:13317 fish/cmds.c:13360 fish/cmds.c:13383
#: fish/cmds.c:13413 fish/cmds.c:13440 fish/cmds.c:13462 fish/cmds.c:13505
#: fish/cmds.c:13549 fish/cmds.c:13594 fish/cmds.c:13657 fish/cmds.c:13683
#: fish/cmds.c:13725 fish/cmds.c:13745 fish/cmds.c:13769 fish/cmds.c:13816
#: fish/cmds.c:13846 fish/cmds.c:13877 fish/cmds.c:13909 fish/cmds.c:13958
#: fish/cmds.c:14002 fish/cmds.c:14039 fish/cmds.c:14076 fish/cmds.c:14110
#: fish/cmds.c:14134 fish/cmds.c:14173 fish/cmds.c:14197 fish/cmds.c:14221
#: fish/cmds.c:14244 fish/cmds.c:14267 fish/cmds.c:14298 fish/cmds.c:14327
#: fish/cmds.c:14351 fish/cmds.c:14402 fish/cmds.c:14454 fish/cmds.c:14510
#: fish/cmds.c:14558 fish/cmds.c:14581 fish/cmds.c:14605 fish/cmds.c:14629
#: fish/cmds.c:14655 fish/cmds.c:14681 fish/cmds.c:14707 fish/cmds.c:14733
#: fish/cmds.c:14759 fish/cmds.c:14785 fish/cmds.c:14831 fish/cmds.c:14891
#: fish/cmds.c:14934 fish/cmds.c:14996 fish/cmds.c:15141 fish/cmds.c:15175
#: fish/cmds.c:15207 fish/cmds.c:15229 fish/cmds.c:15255 fish/cmds.c:15276
#: fish/cmds.c:15347 fish/cmds.c:15647 fish/cmds.c:16398 fish/cmds.c:16421
#: fish/cmds.c:16445 fish/cmds.c:16467 fish/cmds.c:16544 fish/cmds.c:16571
#: fish/cmds.c:16715 fish/cmds.c:16742 fish/cmds.c:16765 fish/cmds.c:16792
#: fish/cmds.c:16835 fish/cmds.c:16859 fish/cmds.c:16887 fish/cmds.c:16915
#: fish/cmds.c:17103 fish/cmds.c:17183 fish/cmds.c:17210 fish/cmds.c:17250
#: fish/cmds.c:17279 fish/cmds.c:17304 fish/cmds.c:17329 fish/cmds.c:17357
#: fish/cmds.c:17396 fish/cmds.c:17421 fish/cmds.c:17447 fish/cmds.c:17477
#: fish/cmds.c:17507 fish/cmds.c:17595 fish/cmds.c:17715 fish/cmds.c:17736
#: fish/cmds.c:17758 fish/cmds.c:17785 fish/cmds.c:17805 fish/cmds.c:17826
#: fish/cmds.c:17846 fish/cmds.c:17865 fish/cmds.c:18218 fish/cmds.c:18248
#: fish/cmds.c:18430 fish/cmds.c:18449 fish/cmds.c:18471 fish/cmds.c:18508
#: fish/cmds.c:18546 fish/cmds.c:18583 fish/cmds.c:18619 fish/cmds.c:18657
#: fish/cmds.c:18694 fish/cmds.c:18731 fish/cmds.c:18768 fish/cmds.c:18809
#: fish/cmds.c:18833 fish/cmds.c:18870 fish/cmds.c:18909
#, c-format
msgid "%s should have %d parameter(s)\n"
msgstr ""

#: fish/cmds.c:4242 fish/cmds.c:4261 fish/cmds.c:4282 fish/cmds.c:4304
#: fish/cmds.c:4327 fish/cmds.c:4351 fish/cmds.c:4372 fish/cmds.c:4394
#: fish/cmds.c:4415 fish/cmds.c:4437 fish/cmds.c:4458 fish/cmds.c:4478
#: fish/cmds.c:4498 fish/cmds.c:4520 fish/cmds.c:4540 fish/cmds.c:4560
#: fish/cmds.c:4580 fish/cmds.c:4600 fish/cmds.c:4620 fish/cmds.c:4640
#: fish/cmds.c:4662 fish/cmds.c:4701 fish/cmds.c:4721 fish/cmds.c:4741
#: fish/cmds.c:4764 fish/cmds.c:4784 fish/cmds.c:4806 fish/cmds.c:4826
#: fish/cmds.c:4848 fish/cmds.c:4868 fish/cmds.c:4890 fish/cmds.c:4910
#: fish/cmds.c:4933 fish/cmds.c:4957 fish/cmds.c:4980 fish/cmds.c:5005
#: fish/cmds.c:5028 fish/cmds.c:5052 fish/cmds.c:5076 fish/cmds.c:5100
#: fish/cmds.c:5123 fish/cmds.c:5146 fish/cmds.c:5170 fish/cmds.c:5194
#: fish/cmds.c:5218 fish/cmds.c:5238 fish/cmds.c:5258 fish/cmds.c:5283
#: fish/cmds.c:5344 fish/cmds.c:5366 fish/cmds.c:5387 fish/cmds.c:5412
#: fish/cmds.c:5484 fish/cmds.c:5508 fish/cmds.c:5532 fish/cmds.c:5556
#: fish/cmds.c:5580 fish/cmds.c:5604 fish/cmds.c:5627 fish/cmds.c:5650
#: fish/cmds.c:5673 fish/cmds.c:5693 fish/cmds.c:5716 fish/cmds.c:5740
#: fish/cmds.c:5764 fish/cmds.c:5791 fish/cmds.c:5848 fish/cmds.c:5868
#: fish/cmds.c:5890 fish/cmds.c:5929 fish/cmds.c:5953 fish/cmds.c:6030
#: fish/cmds.c:6052 fish/cmds.c:6095 fish/cmds.c:6117 fish/cmds.c:6139
#: fish/cmds.c:6160 fish/cmds.c:6187 fish/cmds.c:6215 fish/cmds.c:6246
#: fish/cmds.c:6275 fish/cmds.c:6305 fish/cmds.c:6334 fish/cmds.c:6366
#: fish/cmds.c:6398 fish/cmds.c:6429 fish/cmds.c:6456 fish/cmds.c:6493
#: fish/cmds.c:6517 fish/cmds.c:6540 fish/cmds.c:6564 fish/cmds.c:6585
#: fish/cmds.c:6606 fish/cmds.c:6631 fish/cmds.c:6656 fish/cmds.c:6677
#: fish/cmds.c:6698 fish/cmds.c:6719 fish/cmds.c:6740 fish/cmds.c:6761
#: fish/cmds.c:6782 fish/cmds.c:6803 fish/cmds.c:6827 fish/cmds.c:6870
#: fish/cmds.c:6892 fish/cmds.c:6919 fish/cmds.c:6945 fish/cmds.c:6970
#: fish/cmds.c:6995 fish/cmds.c:7019 fish/cmds.c:7043 fish/cmds.c:7066
#: fish/cmds.c:7088 fish/cmds.c:7107 fish/cmds.c:7128 fish/cmds.c:7152
#: fish/cmds.c:7177 fish/cmds.c:7202 fish/cmds.c:7227 fish/cmds.c:7252
#: fish/cmds.c:7278 fish/cmds.c:7325 fish/cmds.c:7390 fish/cmds.c:7416
#: fish/cmds.c:7442 fish/cmds.c:7468 fish/cmds.c:7491 fish/cmds.c:7519
#: fish/cmds.c:7566 fish/cmds.c:7654 fish/cmds.c:7702 fish/cmds.c:7754
#: fish/cmds.c:7775 fish/cmds.c:7794 fish/cmds.c:7815 fish/cmds.c:7842
#: fish/cmds.c:7869 fish/cmds.c:7896 fish/cmds.c:7923 fish/cmds.c:7950
#: fish/cmds.c:7977 fish/cmds.c:8001 fish/cmds.c:8023 fish/cmds.c:8045
#: fish/cmds.c:8068 fish/cmds.c:8091 fish/cmds.c:8115 fish/cmds.c:8157
#: fish/cmds.c:8180 fish/cmds.c:8203 fish/cmds.c:8225 fish/cmds.c:8248
#: fish/cmds.c:8278 fish/cmds.c:8308 fish/cmds.c:8339 fish/cmds.c:8395
#: fish/cmds.c:8460 fish/cmds.c:8490 fish/cmds.c:8520 fish/cmds.c:8545
#: fish/cmds.c:8572 fish/cmds.c:8598 fish/cmds.c:8626 fish/cmds.c:8648
#: fish/cmds.c:8670 fish/cmds.c:8693 fish/cmds.c:8716 fish/cmds.c:8741
#: fish/cmds.c:8764 fish/cmds.c:8789 fish/cmds.c:8813 fish/cmds.c:8836
#: fish/cmds.c:8863 fish/cmds.c:8893 fish/cmds.c:8923 fish/cmds.c:8952
#: fish/cmds.c:8991 fish/cmds.c:9012 fish/cmds.c:9034 fish/cmds.c:9064
#: fish/cmds.c:9092 fish/cmds.c:9120 fish/cmds.c:9147 fish/cmds.c:9169
#: fish/cmds.c:9196 fish/cmds.c:9299 fish/cmds.c:9323 fish/cmds.c:9347
#: fish/cmds.c:9371 fish/cmds.c:9394 fish/cmds.c:9421 fish/cmds.c:9463
#: fish/cmds.c:9485 fish/cmds.c:9507 fish/cmds.c:9549 fish/cmds.c:9573
#: fish/cmds.c:9597 fish/cmds.c:9621 fish/cmds.c:9648 fish/cmds.c:9670
#: fish/cmds.c:9695 fish/cmds.c:9720 fish/cmds.c:9747 fish/cmds.c:9773
#: fish/cmds.c:9799 fish/cmds.c:9825 fish/cmds.c:9853 fish/cmds.c:9900
#: fish/cmds.c:9928 fish/cmds.c:9973 fish/cmds.c:9994 fish/cmds.c:10017
#: fish/cmds.c:10043 fish/cmds.c:10071 fish/cmds.c:10102 fish/cmds.c:10154
#: fish/cmds.c:10178 fish/cmds.c:10204 fish/cmds.c:10290 fish/cmds.c:10338
#: fish/cmds.c:10426 fish/cmds.c:10511 fish/cmds.c:10553 fish/cmds.c:10581
#: fish/cmds.c:10608 fish/cmds.c:10636 fish/cmds.c:10663 fish/cmds.c:10693
#: fish/cmds.c:10743 fish/cmds.c:10791 fish/cmds.c:10818 fish/cmds.c:10842
#: fish/cmds.c:10865 fish/cmds.c:10887 fish/cmds.c:10912 fish/cmds.c:10980
#: fish/cmds.c:11009 fish/cmds.c:11038 fish/cmds.c:11067 fish/cmds.c:11096
#: fish/cmds.c:11125 fish/cmds.c:11154 fish/cmds.c:11183 fish/cmds.c:11212
#: fish/cmds.c:11241 fish/cmds.c:11270 fish/cmds.c:11298 fish/cmds.c:11326
#: fish/cmds.c:11353 fish/cmds.c:11380 fish/cmds.c:11407 fish/cmds.c:11433
#: fish/cmds.c:11461 fish/cmds.c:11506 fish/cmds.c:11528 fish/cmds.c:11550
#: fish/cmds.c:11575 fish/cmds.c:11600 fish/cmds.c:11622 fish/cmds.c:11644
#: fish/cmds.c:11666 fish/cmds.c:11688 fish/cmds.c:11713 fish/cmds.c:11755
#: fish/cmds.c:11801 fish/cmds.c:11840 fish/cmds.c:11861 fish/cmds.c:11882
#: fish/cmds.c:11903 fish/cmds.c:11923 fish/cmds.c:11948 fish/cmds.c:11992
#: fish/cmds.c:12036 fish/cmds.c:12081 fish/cmds.c:12127 fish/cmds.c:12174
#: fish/cmds.c:12221 fish/cmds.c:12265 fish/cmds.c:12287 fish/cmds.c:12315
#: fish/cmds.c:12344 fish/cmds.c:12371 fish/cmds.c:12395 fish/cmds.c:12421
#: fish/cmds.c:12464 fish/cmds.c:12546 fish/cmds.c:12593 fish/cmds.c:12661
#: fish/cmds.c:12727 fish/cmds.c:12753 fish/cmds.c:12805 fish/cmds.c:12830
#: fish/cmds.c:12875 fish/cmds.c:12918 fish/cmds.c:12942 fish/cmds.c:12968
#: fish/cmds.c:13033 fish/cmds.c:13059 fish/cmds.c:13088 fish/cmds.c:13115
#: fish/cmds.c:13139 fish/cmds.c:13164 fish/cmds.c:13196 fish/cmds.c:13220
#: fish/cmds.c:13244 fish/cmds.c:13268 fish/cmds.c:13292 fish/cmds.c:13318
#: fish/cmds.c:13361 fish/cmds.c:13384 fish/cmds.c:13414 fish/cmds.c:13441
#: fish/cmds.c:13463 fish/cmds.c:13506 fish/cmds.c:13550 fish/cmds.c:13595
#: fish/cmds.c:13658 fish/cmds.c:13684 fish/cmds.c:13726 fish/cmds.c:13746
#: fish/cmds.c:13770 fish/cmds.c:13817 fish/cmds.c:13847 fish/cmds.c:13878
#: fish/cmds.c:13910 fish/cmds.c:13959 fish/cmds.c:14003 fish/cmds.c:14040
#: fish/cmds.c:14077 fish/cmds.c:14111 fish/cmds.c:14135 fish/cmds.c:14174
#: fish/cmds.c:14198 fish/cmds.c:14222 fish/cmds.c:14245 fish/cmds.c:14268
#: fish/cmds.c:14299 fish/cmds.c:14328 fish/cmds.c:14352 fish/cmds.c:14403
#: fish/cmds.c:14455 fish/cmds.c:14511 fish/cmds.c:14559 fish/cmds.c:14582
#: fish/cmds.c:14606 fish/cmds.c:14630 fish/cmds.c:14656 fish/cmds.c:14682
#: fish/cmds.c:14708 fish/cmds.c:14734 fish/cmds.c:14760 fish/cmds.c:14786
#: fish/cmds.c:14832 fish/cmds.c:14892 fish/cmds.c:14935 fish/cmds.c:14997
#: fish/cmds.c:15024 fish/cmds.c:15142 fish/cmds.c:15176 fish/cmds.c:15208
#: fish/cmds.c:15230 fish/cmds.c:15256 fish/cmds.c:15277 fish/cmds.c:15303
#: fish/cmds.c:15348 fish/cmds.c:15373 fish/cmds.c:15438 fish/cmds.c:15503
#: fish/cmds.c:15579 fish/cmds.c:15648 fish/cmds.c:15674 fish/cmds.c:15770
#: fish/cmds.c:15869 fish/cmds.c:15968 fish/cmds.c:16069 fish/cmds.c:16271
#: fish/cmds.c:16399 fish/cmds.c:16422 fish/cmds.c:16446 fish/cmds.c:16468
#: fish/cmds.c:16494 fish/cmds.c:16545 fish/cmds.c:16572 fish/cmds.c:16596
#: fish/cmds.c:16645 fish/cmds.c:16716 fish/cmds.c:16743 fish/cmds.c:16766
#: fish/cmds.c:16793 fish/cmds.c:16836 fish/cmds.c:16860 fish/cmds.c:16888
#: fish/cmds.c:16916 fish/cmds.c:16942 fish/cmds.c:17104 fish/cmds.c:17134
#: fish/cmds.c:17184 fish/cmds.c:17211 fish/cmds.c:17251 fish/cmds.c:17280
#: fish/cmds.c:17305 fish/cmds.c:17330 fish/cmds.c:17358 fish/cmds.c:17397
#: fish/cmds.c:17422 fish/cmds.c:17448 fish/cmds.c:17478 fish/cmds.c:17508
#: fish/cmds.c:17533 fish/cmds.c:17596 fish/cmds.c:17621 fish/cmds.c:17716
#: fish/cmds.c:17737 fish/cmds.c:17759 fish/cmds.c:17786 fish/cmds.c:17806
#: fish/cmds.c:17827 fish/cmds.c:17847 fish/cmds.c:17866 fish/cmds.c:17891
#: fish/cmds.c:18044 fish/cmds.c:18105 fish/cmds.c:18163 fish/cmds.c:18219
#: fish/cmds.c:18249 fish/cmds.c:18296 fish/cmds.c:18374 fish/cmds.c:18431
#: fish/cmds.c:18450 fish/cmds.c:18472 fish/cmds.c:18509 fish/cmds.c:18547
#: fish/cmds.c:18584 fish/cmds.c:18620 fish/cmds.c:18658 fish/cmds.c:18695
#: fish/cmds.c:18732 fish/cmds.c:18769 fish/cmds.c:18810 fish/cmds.c:18834
#: fish/cmds.c:18871 fish/cmds.c:18910 fish/cmds.c:18965
#, c-format
msgid "type 'help %s' for help on %s\n"
msgstr ""

#: fish/cmds.c:4672 fish/cmds.c:5900 fish/cmds.c:5980 fish/cmds.c:6466
#: fish/cmds.c:6839 fish/cmds.c:7288 fish/cmds.c:7335 fish/cmds.c:7354
#: fish/cmds.c:7531 fish/cmds.c:7577 fish/cmds.c:7596 fish/cmds.c:7615
#: fish/cmds.c:7667 fish/cmds.c:8126 fish/cmds.c:8962 fish/cmds.c:9207
#: fish/cmds.c:9226 fish/cmds.c:9245 fish/cmds.c:9264 fish/cmds.c:9432
#: fish/cmds.c:9517 fish/cmds.c:9863 fish/cmds.c:9938 fish/cmds.c:10214
#: fish/cmds.c:10233 fish/cmds.c:10252 fish/cmds.c:10300 fish/cmds.c:10348
#: fish/cmds.c:10367 fish/cmds.c:10386 fish/cmds.c:10436 fish/cmds.c:10455
#: fish/cmds.c:10474 fish/cmds.c:10521 fish/cmds.c:10705 fish/cmds.c:10755
#: fish/cmds.c:11473 fish/cmds.c:11723 fish/cmds.c:11767 fish/cmds.c:11811
#: fish/cmds.c:11959 fish/cmds.c:12002 fish/cmds.c:12046 fish/cmds.c:12091
#: fish/cmds.c:12138 fish/cmds.c:12185 fish/cmds.c:12232 fish/cmds.c:12433
#: fish/cmds.c:12476 fish/cmds.c:12489 fish/cmds.c:12502 fish/cmds.c:12515
#: fish/cmds.c:12558 fish/cmds.c:12603 fish/cmds.c:12622 fish/cmds.c:12673
#: fish/cmds.c:12692 fish/cmds.c:12765 fish/cmds.c:12778 fish/cmds.c:12841
#: fish/cmds.c:12886 fish/cmds.c:12978 fish/cmds.c:12997 fish/cmds.c:13332
#: fish/cmds.c:13474 fish/cmds.c:13517 fish/cmds.c:13561 fish/cmds.c:13606
#: fish/cmds.c:13625 fish/cmds.c:13695 fish/cmds.c:13783 fish/cmds.c:13921
#: fish/cmds.c:13974 fish/cmds.c:14014 fish/cmds.c:14051 fish/cmds.c:14088
#: fish/cmds.c:14147 fish/cmds.c:14367 fish/cmds.c:14418 fish/cmds.c:14474
#: fish/cmds.c:14526 fish/cmds.c:14800 fish/cmds.c:14846 fish/cmds.c:14859
#: fish/cmds.c:14906 fish/cmds.c:14946 fish/cmds.c:14965 fish/cmds.c:15042
#: fish/cmds.c:15070 fish/cmds.c:15093 fish/cmds.c:15390 fish/cmds.c:15456
#: fish/cmds.c:15524 fish/cmds.c:15599 fish/cmds.c:15692 fish/cmds.c:15709
#: fish/cmds.c:15726 fish/cmds.c:15789 fish/cmds.c:15806 fish/cmds.c:15823
#: fish/cmds.c:15888 fish/cmds.c:15905 fish/cmds.c:15922 fish/cmds.c:15988
#: fish/cmds.c:16005 fish/cmds.c:16022 fish/cmds.c:16091 fish/cmds.c:16114
#: fish/cmds.c:16142 fish/cmds.c:16159 fish/cmds.c:16182 fish/cmds.c:16210
#: fish/cmds.c:16227 fish/cmds.c:16290 fish/cmds.c:16307 fish/cmds.c:16330
#: fish/cmds.c:16353 fish/cmds.c:16805 fish/cmds.c:16960 fish/cmds.c:16977
#: fish/cmds.c:16999 fish/cmds.c:17032 fish/cmds.c:17055 fish/cmds.c:17223
#: fish/cmds.c:17368 fish/cmds.c:17550 fish/cmds.c:17639 fish/cmds.c:17656
#: fish/cmds.c:17673 fish/cmds.c:17924 fish/cmds.c:17941 fish/cmds.c:17958
#: fish/cmds.c:17975 fish/cmds.c:17992 fish/cmds.c:18261 fish/cmds.c:18482
#: fish/cmds.c:18519 fish/cmds.c:18557 fish/cmds.c:18594 fish/cmds.c:18630
#: fish/cmds.c:18668 fish/cmds.c:18705 fish/cmds.c:18742 fish/cmds.c:18779
#: fish/cmds.c:18844 fish/cmds.c:18881 fish/cmds.c:18920 fish/cmds.c:18934
#: fish/cmds.c:19003 fish/cmds.c:19020 fish/cmds.c:19037 fish/cmds.c:19054
#, c-format
msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
msgstr ""

#: fish/cmds.c:4678 fish/cmds.c:5906 fish/cmds.c:5986 fish/cmds.c:6845
#: fish/cmds.c:7294 fish/cmds.c:7341 fish/cmds.c:7360 fish/cmds.c:7537
#: fish/cmds.c:7583 fish/cmds.c:7602 fish/cmds.c:7621 fish/cmds.c:7673
#: fish/cmds.c:8132 fish/cmds.c:8968 fish/cmds.c:9213 fish/cmds.c:9232
#: fish/cmds.c:9251 fish/cmds.c:9270 fish/cmds.c:9438 fish/cmds.c:9523
#: fish/cmds.c:9869 fish/cmds.c:9944 fish/cmds.c:10220 fish/cmds.c:10239
#: fish/cmds.c:10258 fish/cmds.c:10306 fish/cmds.c:10354 fish/cmds.c:10373
#: fish/cmds.c:10392 fish/cmds.c:10442 fish/cmds.c:10461 fish/cmds.c:10480
#: fish/cmds.c:10527 fish/cmds.c:10711 fish/cmds.c:10761 fish/cmds.c:11479
#: fish/cmds.c:11729 fish/cmds.c:11773 fish/cmds.c:11817 fish/cmds.c:11965
#: fish/cmds.c:12008 fish/cmds.c:12052 fish/cmds.c:12097 fish/cmds.c:12144
#: fish/cmds.c:12191 fish/cmds.c:12238 fish/cmds.c:12564 fish/cmds.c:12609
#: fish/cmds.c:12628 fish/cmds.c:12679 fish/cmds.c:12847 fish/cmds.c:12892
#: fish/cmds.c:12984 fish/cmds.c:13003 fish/cmds.c:13480 fish/cmds.c:13523
#: fish/cmds.c:13567 fish/cmds.c:13612 fish/cmds.c:13631 fish/cmds.c:13701
#: fish/cmds.c:13789 fish/cmds.c:13927 fish/cmds.c:14373 fish/cmds.c:14424
#: fish/cmds.c:14480 fish/cmds.c:14532 fish/cmds.c:14952 fish/cmds.c:15048
#: fish/cmds.c:15076 fish/cmds.c:15099 fish/cmds.c:15530 fish/cmds.c:15605
#: fish/cmds.c:16097 fish/cmds.c:16120 fish/cmds.c:16165 fish/cmds.c:16188
#: fish/cmds.c:16313 fish/cmds.c:16336 fish/cmds.c:16811 fish/cmds.c:17005
#: fish/cmds.c:17038 fish/cmds.c:17061 fish/cmds.c:17998 fish/cmds.c:18267
#, c-format
msgid "%s: %s: integer out of range\n"
msgstr ""

#: fish/cmds.c:5282 fish/cmds.c:5411 fish/cmds.c:5790 fish/cmds.c:5952
#: fish/cmds.c:6051 fish/cmds.c:7701 fish/cmds.c:8338 fish/cmds.c:8394
#: fish/cmds.c:10101 fish/cmds.c:10911 fish/cmds.c:15023 fish/cmds.c:15302
#: fish/cmds.c:15372 fish/cmds.c:15437 fish/cmds.c:15502 fish/cmds.c:15578
#: fish/cmds.c:15673 fish/cmds.c:15769 fish/cmds.c:15868 fish/cmds.c:15967
#: fish/cmds.c:16068 fish/cmds.c:16270 fish/cmds.c:16493 fish/cmds.c:16595
#: fish/cmds.c:16644 fish/cmds.c:16941 fish/cmds.c:17133 fish/cmds.c:17532
#: fish/cmds.c:17620 fish/cmds.c:17890 fish/cmds.c:18043 fish/cmds.c:18104
#: fish/cmds.c:18162 fish/cmds.c:18295 fish/cmds.c:18373 fish/cmds.c:18964
#, c-format
msgid "%s should have %d-%d parameter(s)\n"
msgstr ""

#: fish/cmds.c:5313 fish/cmds.c:5452 fish/cmds.c:5811 fish/cmds.c:6001
#: fish/cmds.c:6066 fish/cmds.c:7723 fish/cmds.c:8357 fish/cmds.c:8423
#: fish/cmds.c:10122 fish/cmds.c:10944 fish/cmds.c:15109 fish/cmds.c:15319
#: fish/cmds.c:15405 fish/cmds.c:15466 fish/cmds.c:15540 fish/cmds.c:15615
#: fish/cmds.c:15736 fish/cmds.c:15833 fish/cmds.c:15932 fish/cmds.c:16032
#: fish/cmds.c:16237 fish/cmds.c:16368 fish/cmds.c:16514 fish/cmds.c:16611
#: fish/cmds.c:16682 fish/cmds.c:17071 fish/cmds.c:17151 fish/cmds.c:17565
#: fish/cmds.c:17683 fish/cmds.c:18008 fish/cmds.c:18067 fish/cmds.c:18127
#: fish/cmds.c:18185 fish/cmds.c:18341 fish/cmds.c:18400 fish/cmds.c:19074
#, c-format
msgid "%s: unknown optional argument \"%s\"\n"
msgstr ""

#: fish/cmds.c:5319 fish/cmds.c:5458 fish/cmds.c:5817 fish/cmds.c:6007
#: fish/cmds.c:6072 fish/cmds.c:7729 fish/cmds.c:8363 fish/cmds.c:8429
#: fish/cmds.c:10128 fish/cmds.c:10950 fish/cmds.c:15115 fish/cmds.c:15325
#: fish/cmds.c:15411 fish/cmds.c:15472 fish/cmds.c:15546 fish/cmds.c:15621
#: fish/cmds.c:15742 fish/cmds.c:15839 fish/cmds.c:15938 fish/cmds.c:16038
#: fish/cmds.c:16243 fish/cmds.c:16374 fish/cmds.c:16520 fish/cmds.c:16617
#: fish/cmds.c:16688 fish/cmds.c:17077 fish/cmds.c:17157 fish/cmds.c:17571
#: fish/cmds.c:17689 fish/cmds.c:18014 fish/cmds.c:18073 fish/cmds.c:18133
#: fish/cmds.c:18191 fish/cmds.c:18347 fish/cmds.c:18406 fish/cmds.c:19080
#, c-format
msgid "%s: optional argument \"%s\" given twice\n"
msgstr ""

#: fish/cmds.c:19107
#, c-format
msgid "%s: unknown command\n"
msgstr ""

#: fish/config.c:75 fish/config.c:114
#, c-format
msgid "%s: %s: line %d: error parsing configuration file: %s\n"
msgstr ""

#: fish/copy.c:48
#, c-format
msgid ""
"use 'copy-in <local> [<local>...] <remotedir>' to copy files into the image\n"
msgstr ""

#: fish/copy.c:69
#, c-format
msgid "copy-in: target '%s' is not a directory\n"
msgstr ""

#: fish/copy.c:166
#, c-format
msgid "error: argument is zero length or longer than maximum permitted\n"
msgstr ""

#: fish/copy.c:211
#, c-format
msgid ""
"use 'copy-out <remote> [<remote>...] <localdir>' to copy files out of the "
"image\n"
msgstr ""

#: fish/copy.c:222
#, c-format
msgid "copy-out: target '%s' is not a directory\n"
msgstr ""

#: fish/copy.c:267
#, c-format
msgid "copy-out: '%s' is not a file or directory\n"
msgstr ""

#: fish/display.c:43
#, c-format
msgid "display filename\n"
msgstr ""

#: fish/edit.c:50
#, c-format
msgid "use '%s filename' to edit a file\n"
msgstr ""

#: fish/event-names.c:140
#, c-format
msgid "unknown event name: %s\n"
msgstr ""

#: fish/events.c:162
#, c-format
msgid "use 'event <name> <eventset> <script>' to register an event handler\n"
msgstr ""

#: fish/events.c:221
#, c-format
msgid "use 'delete-event <name>' to delete an event handler\n"
msgstr ""

#: fish/events.c:230
#, c-format
msgid "delete-event: %s: no such event handler\n"
msgstr ""

#: fish/events.c:267
#, c-format
msgid "use 'list-events' to list event handlers\n"
msgstr ""

#: fish/fish.c:107
#, c-format
msgid ""
"%s: guest filesystem shell\n"
"%s lets you edit virtual machine filesystems\n"
"Copyright (C) 2009-2012 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] cmd [: cmd : cmd ...]\n"
"Options:\n"
"  -h|--cmd-help        List available commands\n"
"  -h|--cmd-help cmd    Display detailed help on 'cmd'\n"
"  -a|--add image       Add image\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  --csh                Make --listen csh-compatible\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  -D|--no-dest-paths   Don't tab-complete paths from guest fs\n"
"  --echo-keys          Don't turn off echo for passphrases\n"
"  -f|--file file       Read commands from file\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  -i|--inspector       Automatically mount filesystems\n"
"  --keys-from-stdin    Read passphrases from stdin\n"
"  --listen             Listen for remote commands\n"
"  --live               Connect to a live virtual machine\n"
"  -m|--mount dev[:mnt[:opts]] Mount dev on mnt (if omitted, /)\n"
"  --network            Enable network\n"
"  -N|--new type        Create prepared disk (test1.img, ...)\n"
"  -n|--no-sync         Don't autosync\n"
"  --pipe-error         Pipe commands can detect write errors\n"
"  --progress-bars      Enable progress bars even when not interactive\n"
"  --no-progress-bars   Disable progress bars\n"
"  --remote[=pid]       Send commands to remote %s\n"
"  -r|--ro              Mount read-only\n"
"  --selinux            Enable SELinux support\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  -w|--rw              Mount read-write\n"
"  -x                   Echo each command before executing it\n"
"\n"
"To examine a disk image, ISO, hard disk, filesystem etc:\n"
"  %s [--ro|--rw] -i -a /path/to/disk.img\n"
"or\n"
"  %s [--ro|--rw] -i -d name-of-libvirt-domain\n"
"\n"
"--ro recommended to avoid any writes to the disk image.  If -i option fails\n"
"run again without -i and use 'run' + 'list-filesystems' + 'mount' cmds.\n"
"\n"
"For more information, see the manpage %s(1).\n"
msgstr ""

#: fish/fish.c:257
#, c-format
msgid "%s: --listen=PID: PID was not a number: %s\n"
msgstr ""

#: fish/fish.c:264
#, c-format
msgid ""
"%s: remote: $GUESTFISH_PID must be set to the PID of the remote process\n"
msgstr ""

#: fish/fish.c:318
#, c-format
msgid "%s: only one -f parameter can be given\n"
msgstr ""

#: fish/fish.c:490
#, c-format
msgid "%s: cannot use --listen and --remote options at the same time\n"
msgstr ""

#: fish/fish.c:498
#, c-format
msgid "%s: extra parameters on the command line with --listen flag\n"
msgstr ""

#: fish/fish.c:504
#, c-format
msgid "%s: cannot use --listen and --file options at the same time\n"
msgstr ""

#: fish/fish.c:663
#, c-format
msgid ""
"\n"
"Welcome to guestfish, the libguestfs filesystem interactive shell for\n"
"editing virtual machine filesystems.\n"
"\n"
"Type: 'help' for help on commands\n"
"      'man' to read the manual\n"
"      'quit' to quit the shell\n"
"\n"
msgstr ""

#: fish/fish.c:814 fish/fish.c:830
#, c-format
msgid "%s: command arguments not separated by whitespace\n"
msgstr ""

#: fish/fish.c:824
#, c-format
msgid "%s: unterminated single quote\n"
msgstr ""

#: fish/fish.c:854
#, c-format
msgid "%s: internal error parsing string at '%s'\n"
msgstr ""

#: fish/fish.c:871
#, c-format
msgid "%s: too many arguments\n"
msgstr ""

#: fish/fish.c:946
#, c-format
msgid "%s: invalid escape sequence in string (starting at offset %d)\n"
msgstr ""

#: fish/fish.c:955
#, c-format
msgid "%s: unterminated double quote\n"
msgstr ""

#: fish/fish.c:1020
#, c-format
msgid "%s: empty command on command line\n"
msgstr ""

#: fish/fish.c:1176
msgid "display a list of commands or help on a command"
msgstr ""

#: fish/fish.c:1178
msgid "quit guestfish"
msgstr ""

#: fish/fish.c:1189
#, c-format
msgid ""
"help - display a list of commands or help on a command\n"
"     help cmd\n"
"     help\n"
msgstr ""

#: fish/fish.c:1197
#, c-format
msgid ""
"quit - quit guestfish\n"
"     quit\n"
msgstr ""

#: fish/fish.c:1202
#, c-format
msgid "%s: command not known, use -h to list all commands\n"
msgstr ""

#: fish/fish.c:1218
#, c-format
msgid ""
"Did you mean to open a disk image?  guestfish -a disk.img\n"
"For a list of commands:             guestfish -h\n"
"For complete documentation:         man guestfish\n"
msgstr ""

#: fish/fish.c:1227
#, c-format
msgid "%s:%d: libguestfs: error: %s\n"
msgstr ""

#: fish/fish.c:1383
#, c-format
msgid "Runaway quote in string \"%s\"\n"
msgstr ""

#: fish/fish.c:1580
#, c-format
msgid ""
"%s: to use Windows drive letters, you must inspect the guest (\"-i\" option "
"or run \"inspect-os\" command)\n"
msgstr ""

#: fish/fish.c:1600
#, c-format
msgid ""
"%s: drive '%c:' not found.  To list available drives do:\n"
"  inspect-get-drive-mappings %s\n"
msgstr ""

#: fish/fish.c:1619
#, c-format
msgid ""
"%s: to access '%c:', mount %s first.  One way to do this is:\n"
"  umount-all\n"
"  mount %s /\n"
msgstr ""

#: fish/glob.c:62
#, c-format
msgid "use 'glob command [args...]'\n"
msgstr ""

#: fish/glob.c:127
#, c-format
msgid "glob: guestfs_glob_expand call failed: %s\n"
msgstr ""

#: fish/help.c:39
#, c-format
msgid ""
"Add disk images to examine using the -a or -d options, or the 'add' "
"command.\n"
"Or create a new disk image using -N, or the 'alloc' or 'sparse' commands.\n"
"Once you have done this, use the 'run' command.\n"
msgstr ""

#: fish/help.c:45
#, c-format
msgid ""
"Find out what filesystems are available using 'list-filesystems' and then\n"
"mount them to examine or modify the contents using 'mount-ro' or\n"
"'mount'.\n"
msgstr ""

#: fish/help.c:53
#, c-format
msgid ""
"For more information about a command, use 'help cmd'.\n"
"\n"
"To read the manual, type 'man'.\n"
msgstr ""

#: fish/hexedit.c:42
#, c-format
msgid "hexedit (device|filename) [max | start max]\n"
msgstr ""

#: fish/hexedit.c:53
#, c-format
msgid "hexedit: %s is a zero length file or device\n"
msgstr ""

#: fish/hexedit.c:64
#, c-format
msgid ""
"hexedit: %s is larger than %s. You must supply a limit using\n"
"  'hexedit %s <max>' (eg. 'hexedit %s 1M') or a range using\n"
"  'hexedit %s <start> <max>'.\n"
msgstr ""

#: fish/hexedit.c:93
#, c-format
msgid "hexedit: invalid range\n"
msgstr ""

#: fish/inspect.c:78
#, c-format
msgid "%s: don't use --live and -i options together\n"
msgstr ""

#: fish/inspect.c:91
#, c-format
msgid ""
"%s: no operating system was found on this disk\n"
"\n"
"If using guestfish '-i' option, remove this option and instead\n"
"use the commands 'run' followed by 'list-filesystems'.\n"
"You can then mount filesystems you want by hand using the\n"
"'mount' or 'mount-ro' command.\n"
"\n"
"If using guestmount '-i', remove this option and choose the\n"
"filesystem(s) you want to see by manually adding '-m' option(s).\n"
"Use 'virt-filesystems' to see what filesystems are available.\n"
"\n"
"If using other virt tools, this disk image won't work\n"
"with these tools.  Use the guestfish equivalent commands\n"
"(see the virt tool manual page).\n"
msgstr ""

#: fish/inspect.c:112
#, c-format
msgid ""
"%s: multi-boot operating systems are not supported\n"
"\n"
"If using guestfish '-i' option, remove this option and instead\n"
"use the commands 'run' followed by 'list-filesystems'.\n"
"You can then mount filesystems you want by hand using the\n"
"'mount' or 'mount-ro' command.\n"
"\n"
"If using guestmount '-i', remove this option and choose the\n"
"filesystem(s) you want to see by manually adding '-m' option(s).\n"
"Use 'virt-filesystems' to see what filesystems are available.\n"
"\n"
"If using other virt tools, multi-boot operating systems won't work\n"
"with these tools.  Use the guestfish equivalent commands\n"
"(see the virt tool manual page).\n"
msgstr ""

#: fish/inspect.c:171
#, c-format
msgid "%s: some filesystems could not be mounted (ignored)\n"
msgstr ""

#: fish/inspect.c:183
#, c-format
msgid "Operating system: %s\n"
msgstr ""

#: fish/inspect.c:196
#, c-format
msgid "%s mounted on %s\n"
msgstr ""

#: fish/keys.c:54
#, c-format
msgid "Enter key or passphrase (\"%s\"): "
msgstr ""

#: fish/lcd.c:35
#, c-format
msgid "use 'lcd directory' to change local directory\n"
msgstr ""

#: fish/man.c:36
#, c-format
msgid "use 'man' without parameters to open the manual\n"
msgstr ""

#: fish/man.c:55
#, c-format
msgid "the external 'man' program failed\n"
msgstr ""

#: fish/more.c:41
#, c-format
msgid "use '%s filename' to page a file\n"
msgstr ""

#: fish/options.c:40
#, c-format
msgid "%s: too many drives added on the command line\n"
msgstr ""

#: fish/options.c:152
#, c-format
msgid "%s: '%s' could not be mounted.\n"
msgstr ""

#: fish/options.c:156
#, c-format
msgid ""
"%s: Check mount(8) man page to ensure options '%s'\n"
"%s: are supported by the filesystem that is being mounted.\n"
msgstr ""

#: fish/options.c:160
#, c-format
msgid "%s: Did you mean to mount one of these filesystems?\n"
msgstr ""

#: fish/prep-boot.c:35 fish/prep-boot.c:90 fish/prep-disk.c:35
#: fish/prep-fs.c:35 fish/prep-lv.c:70 fish/prep-lv.c:117 fish/prep-part.c:35
msgid "failed to allocate disk"
msgstr ""

#: fish/prep-boot.c:43 fish/prep-boot.c:98
msgid "could not parse boot size"
msgstr ""

#: fish/prep-boot.c:47 fish/prep-boot.c:102
#, c-format
msgid "failed to get sector size of disk: %s"
msgstr ""

#: fish/prep-boot.c:51 fish/prep-boot.c:106 fish/prep-fs.c:42
#: fish/prep-lv.c:77 fish/prep-lv.c:124 fish/prep-part.c:42
#, c-format
msgid "failed to partition disk: %s"
msgstr ""

#: fish/prep-boot.c:56 fish/prep-boot.c:111
#, c-format
msgid "failed to add boot partition: %s"
msgstr ""

#: fish/prep-boot.c:60 fish/prep-boot.c:115
#, c-format
msgid "failed to add root partition: %s"
msgstr ""

#: fish/prep-boot.c:69 fish/prep-boot.c:129
#, c-format
msgid "failed to create boot filesystem: %s"
msgstr ""

#: fish/prep-boot.c:78 fish/prep-boot.c:152
#, c-format
msgid "failed to create root filesystem: %s"
msgstr ""

#: fish/prep-boot.c:87 fish/prep-boot.c:121 fish/prep-lv.c:67
#: fish/prep-lv.c:83 fish/prep-lv.c:114 fish/prep-lv.c:130
msgid "incorrect format for LV name, use '/dev/VG/LV'"
msgstr ""

#: fish/prep-boot.c:138 fish/prep-lv.c:92 fish/prep-lv.c:139
#, c-format
msgid "failed to create PV: %s: %s"
msgstr ""

#: fish/prep-boot.c:143 fish/prep-lv.c:97 fish/prep-lv.c:144
#, c-format
msgid "failed to create VG: %s: %s"
msgstr ""

#: fish/prep-boot.c:148 fish/prep-lv.c:102 fish/prep-lv.c:149
#, c-format
msgid "failed to create LV: /dev/%s/%s: %s"
msgstr ""

#: fish/prep-fs.c:52 fish/prep-lv.c:154
#, c-format
msgid "failed to create filesystem (%s): %s"
msgstr ""

#: fish/prep.c:38
#, c-format
msgid ""
"List of available prepared disk images:\n"
"\n"
msgstr ""

#: fish/prep.c:41
#, c-format
msgid ""
"guestfish -N %-8s - %s\n"
"\n"
"%s\n"
msgstr ""

#: fish/prep.c:49
#, c-format
msgid "  Optional parameters:\n"
msgstr ""

#: fish/prep.c:56
#, c-format
msgid "<%s> %s (default: %s)\n"
msgstr ""

#: fish/prep.c:66
#, c-format
msgid ""
"Prepared disk images are written to file \"test1.img\" in the local\n"
"directory.  (\"test2.img\" etc if -N option is given multiple times).\n"
"For more information see the guestfish(1) manual.\n"
msgstr ""

#: fish/prep.c:97
#, c-format
msgid ""
"guestfish: -N parameter '%s': no such prepared disk image known.\n"
"Use 'guestfish -N help' to list possible values for the -N parameter.\n"
msgstr ""

#: fish/prep.c:159
#, c-format
msgid "guestfish: error creating prepared disk image '%s' on '%s': "
msgstr ""

#: fish/rc.c:260
#, c-format
msgid "guestfish: protocol error: could not read 'hello' message\n"
msgstr ""

#: fish/rc.c:265
#, c-format
msgid ""
"guestfish: protocol error: version mismatch, server version '%s' does not "
"match client version '%s'.  The two versions must match exactly.\n"
msgstr ""

#: fish/rc.c:349 fish/rc.c:363
#, c-format
msgid "guestfish: remote: looks like the server is not running\n"
msgstr ""

#: fish/rc.c:375 fish/rc.c:389
#, c-format
msgid "guestfish: protocol error: could not send initial greeting to server\n"
msgstr ""

#: fish/rc.c:400
#, c-format
msgid "guestfish: protocol error: could not decode reply from server\n"
msgstr ""

#: fish/reopen.c:39
#, c-format
msgid "'reopen' command takes no parameters\n"
msgstr ""

#: fish/reopen.c:52
#, c-format
msgid "reopen: guestfs_create: failed to create handle\n"
msgstr ""

#: fish/setenv.c:35
#, c-format
msgid "use '%s VAR value' to set an environment variable\n"
msgstr ""

#: fish/setenv.c:57
#, c-format
msgid "use '%s VAR' to unset an environment variable\n"
msgstr ""

#: fish/supported.c:67
msgid "yes"
msgstr ""

#: fish/supported.c:69
msgid "no"
msgstr ""

#: fish/time.c:37
#, c-format
msgid "use 'time command [args...]'\n"
msgstr ""

#: format/format.c:70
msgid "IMPORTANT NOTE: This program ERASES ALL DATA on disks."
msgstr ""

#: format/format.c:73
#, c-format
msgid ""
"Try `%s --help' for more information.\n"
"%s\n"
msgstr ""

#: format/format.c:77
#, c-format
msgid ""
"%s: erase and make a blank disk\n"
"Copyright (C) 2012 Red Hat Inc.\n"
"\n"
"%s\n"
"\n"
"Usage:\n"
"  %s [--options] -a disk.img [-a disk.img ...]\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  --filesystem=..      Create empty filesystem\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  --help               Display brief help\n"
"  --lvm=..             Create Linux LVM2 logical volume\n"
"  --partition=..       Create / set partition type\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  --wipe               Write zeroes over whole disk\n"
"  -x                   Trace libguestfs API calls\n"
"For more information, see the manpage %s(1).\n"
"\n"
"%s\n"
"\n"
msgstr ""

#: format/format.c:159
#, c-format
msgid "%s: no filesystem was specified\n"
msgstr ""

#: format/format.c:167
#, c-format
msgid "%s: --lvm option cannot be given multiple times\n"
msgstr ""

#: format/format.c:271
#, c-format
msgid ""
"%s: failed to rescan the disks after two attempts.  This\n"
"may mean there is some sort of partition table or disk\n"
"data which we are unable to remove.  If you think this\n"
"is a bug, please file a bug at http://libguestfs.org/\n"
msgstr ""

#: format/format.c:312
#, c-format
msgid "%s: cannot parse --lvm option (%s)\n"
msgstr ""

#: fuse/guestmount.c:104
#, c-format
msgid ""
"%s: FUSE module for libguestfs\n"
"%s lets you mount a virtual machine filesystem\n"
"Copyright (C) 2009-2012 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] mountpoint\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  --dir-cache-timeout  Set readdir cache timeout (default 5 sec)\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  --echo-keys          Don't turn off echo for passphrases\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  --fuse-help          Display extra FUSE options\n"
"  -i|--inspector       Automatically mount filesystems\n"
"  --help               Display help message and exit\n"
"  --keys-from-stdin    Read passphrases from stdin\n"
"  --live               Connect to a live virtual machine\n"
"  -m|--mount dev[:mnt[:opts]] Mount dev on mnt (if omitted, /)\n"
"  -n|--no-sync         Don't autosync\n"
"  -o|--option opt      Pass extra option to FUSE\n"
"  --pid-file filename  Write PID to filename\n"
"  -r|--ro              Mount read-only\n"
"  --selinux            Enable SELinux support\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  -w|--rw              Mount read-write\n"
"  -x|--trace           Trace guestfs API calls\n"
msgstr ""

#: fuse/guestmount.c:306
#, c-format
msgid "%s: must have at least one -a/-d and at least one -m/-i option\n"
msgstr ""

#: fuse/guestmount.c:316
#, c-format
msgid "%s: --live is not compatible with --ro option\n"
msgstr ""

#: fuse/guestmount.c:323
#, c-format
msgid "%s: --live is not compatible with -i option\n"
msgstr ""

#: fuse/guestmount.c:338
#, c-format
msgid "%s: with --live, you must use exactly one -d option\n"
msgstr ""

#: fuse/guestmount.c:345
#, c-format
msgid "%s: --live is not compatible with -a option\n"
msgstr ""

#: fuse/guestmount.c:354
#, c-format
msgid "%s: you must specify a mountpoint in the host filesystem\n"
msgstr ""

#: inspector/virt-inspector.c:81
#, c-format
msgid ""
"%s: display information about a virtual machine\n"
"Copyright (C) 2010 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] -d domname file [file ...]\n"
"  %s [--options] -a disk.img [-a disk.img ...] file [file ...]\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  --echo-keys          Don't turn off echo for passphrases\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  --help               Display brief help\n"
"  --keys-from-stdin    Read passphrases from stdin\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  -x                   Trace libguestfs API calls\n"
"  --xpath query        Perform an XPath query\n"
"For more information, see the manpage %s(1).\n"
msgstr ""

#: inspector/virt-inspector.c:253
#, c-format
msgid "%s: cannot use --xpath together with other options.\n"
msgstr ""

#: inspector/virt-inspector.c:286
#, c-format
msgid ""
"%s: no operating system could be detected inside this disk image.\n"
"\n"
"This may be because the file is not a disk image, or is not a virtual "
"machine\n"
"image, or because the OS type is not understood by libguestfs.\n"
"\n"
"NOTE for Red Hat Enterprise Linux 6 users: for Windows guest support you "
"must\n"
"install the separate libguestfs-winsupport package.\n"
"\n"
"If you feel this is an error, please file a bug report including as much\n"
"information about the disk image as possible.\n"
msgstr ""

#: inspector/virt-inspector.c:311
#, c-format
msgid "%s: XML write error at \"%s\": %m\n"
msgstr ""

#: inspector/virt-inspector.c:323
#, c-format
msgid "%s: xmlOutputBufferCreateFd: failed to open stdout\n"
msgstr ""

#: inspector/virt-inspector.c:331
#, c-format
msgid "%s: xmlNewTextWriter: failed to create libxml2 writer\n"
msgstr ""

#: inspector/virt-inspector.c:823
#, c-format
msgid "%s: unable to parse XML from stdin\n"
msgstr ""

#: inspector/virt-inspector.c:829
#, c-format
msgid "%s: unable to create new XPath context\n"
msgstr ""

#: inspector/virt-inspector.c:836
#, c-format
msgid "%s: unable to evaluate XPath expression\n"
msgstr ""

#: inspector/virt-inspector.c:847
#, c-format
msgid "%s: xmlSaveToFd failed\n"
msgstr ""

#: inspector/virt-inspector.c:854
#, c-format
msgid "%s: xmlNewDoc failed\n"
msgstr ""

#: inspector/virt-inspector.c:859
#, c-format
msgid "%s: xmlCopyNode failed\n"
msgstr ""

#: inspector/virt-inspector.c:866
#, c-format
msgid "%s: xmlSaveDoc failed\n"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:158
msgid "open_guest: first parameter must be a string or an arrayref"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:164
msgid "open_guest: first argument contains undefined element"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:172
#, perl-brace-format
msgid "guest image {imagename} does not exist or is not readable"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:179
msgid ""
"open_guest: no libvirt support (install Sys::Virt, XML::XPath and XML::"
"XPath::XMLParser)"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:184
msgid "open_guest: too many domains listed on command line"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:191
msgid "open_guest: cannot connect to libvirt"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:210
#, perl-brace-format
msgid "{imagename} is not the name of an inactive libvirt domain\n"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:213
#, perl-brace-format
msgid "{imagename} is not the name of a libvirt domain\n"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:246
#, perl-brace-format
msgid "{imagename} seems to have no disk devices\n"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:831
msgid ""
"No operating system could be detected inside this disk image.\n"
"\n"
"This may be because the file is not a disk image, or is not a virtual "
"machine\n"
"image, or because the OS type is not understood by virt-inspector.\n"
"\n"
"If you feel this is an error, please file a bug report including as much\n"
"information about the disk image as possible.\n"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:949
#, perl-brace-format
msgid "unknown filesystem {fs}\n"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1027
#, perl-brace-format
msgid "Error running rpm -qa: {error}"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1053
#, perl-brace-format
msgid "Error running dpkg-query: {error}"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1118
msgid "Can't find grub on guest"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1173
#, perl-brace-format
msgid "Grub entry {title} has no kernel"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1204
#, perl-brace-format
msgid "grub refers to {path}, which doesn't exist\n"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1227
#, perl-brace-format
msgid "Grub entry {title} does not specify an initrd"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1296
#, perl-brace-format
msgid "Didn't find modules directory {modules} for kernel {path}"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1304
#, perl-brace-format
msgid "Couldn't guess kernel version number from path for kernel {path}"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1358
#, perl-brace-format
msgid "{path} doesn't match augeas pattern"
msgstr ""

#: perl/lib/Sys/Guestfs/Lib.pm:1397
#, perl-brace-format
msgid "{filename}: could not read initrd format"
msgstr ""

#: rescue/virt-rescue.c:67
#, c-format
msgid ""
"%s: Run a rescue shell on a virtual machine\n"
"Copyright (C) 2009-2012 Red Hat Inc.\n"
"Usage:\n"
"  %s [--options] -d domname\n"
"  %s [--options] -a disk.img [-a disk.img ...]\n"
"Options:\n"
"  -a|--add image       Add image\n"
"  --append kernelopts  Append kernel options\n"
"  -c|--connect uri     Specify libvirt URI for -d option\n"
"  -d|--domain guest    Add disks from libvirt guest\n"
"  --format[=raw|..]    Force disk format for -a option\n"
"  --help               Display brief help\n"
"  -m|--memsize MB      Set memory size in megabytes\n"
"  --network            Enable network\n"
"  -r|--ro              Access read-only\n"
"  --scratch[=N]        Add scratch disk(s)\n"
"  --selinux            Enable SELinux\n"
"  --smp N              Enable SMP with N >= 2 virtual CPUs\n"
"  --suggest            Suggest mount commands for this guest\n"
"  -v|--verbose         Verbose messages\n"
"  -V|--version         Display version and exit\n"
"  -w|--rw              Mount read-write\n"
"  -x                   Trace libguestfs API calls\n"
"For more information, see the manpage %s(1).\n"
msgstr ""

#: rescue/virt-rescue.c:171
#, c-format
msgid "%s: could not parse --smp parameter '%s'\n"
msgstr ""

#: rescue/virt-rescue.c:176
#, c-format
msgid "%s: --smp parameter '%s' should be >= 1\n"
msgstr ""

#: rescue/virt-rescue.c:189
#, c-format
msgid "%s: could not parse --scratch parameter '%s'\n"
msgstr ""

#: rescue/virt-rescue.c:195
#, c-format
msgid "%s: --scratch parameter '%s' should be >= 1\n"
msgstr ""

#: rescue/virt-rescue.c:225
#, c-format
msgid "%s: could not parse memory size '%s'\n"
msgstr ""

#: rescue/virt-rescue.c:324
#, c-format
msgid ""
"%s: warning: virt-rescue doesn't work with the libvirt backend\n"
"at the moment.  As a workaround, forcing attach-method = 'appliance'.\n"
msgstr ""

#: rescue/virt-rescue.c:412
#, c-format
msgid ""
"Inspecting the virtual machine or disk image ...\n"
"\n"
msgstr ""

#: rescue/virt-rescue.c:431
#, c-format
msgid ""
"This disk contains one or more operating systems.  You can use these mount\n"
"commands in virt-rescue (at the ><rescue> prompt) to mount the filesystems.\n"
"\n"
msgstr ""

#: rescue/virt-rescue.c:441
#, c-format
msgid ""
"# %s is the root of a %s operating system\n"
"# type: %s, distro: %s, version: %d.%d\n"
"# %s\n"
"\n"
msgstr ""

#: rescue/virt-rescue.c:498
#, c-format
msgid ""
"This disk contains no filesystems that we recognize.\n"
"\n"
"However you can still use virt-rescue on the disk image, to try to mount\n"
"filesystems that are not recognized by libguestfs, or to create partitions,\n"
"logical volumes and filesystems on a blank disk.\n"
msgstr ""

#: rescue/virt-rescue.c:505
#, c-format
msgid ""
"This disk contains one or more filesystems, but we don't recognize any\n"
"operating system.  You can use these mount commands in virt-rescue (at the\n"
"><rescue> prompt) to mount these filesystems.\n"
"\n"
msgstr ""

#: rescue/virt-rescue.c:510
#, c-format
msgid "# %s has type '%s'\n"
msgstr ""

#: rescue/virt-rescue.c:718
#, c-format
msgid "%s: unknown child exit status (%d)\n"
msgstr ""

#: src/appliance.c:225
#, c-format
msgid ""
"cannot find any suitable libguestfs supermin, fixed or old-style appliance "
"on LIBGUESTFS_PATH (search path: %s)"
msgstr ""

#: src/appliance.c:384
#, c-format
msgid "security: cached appliance %s is not owned by UID %d"
msgstr ""

#: src/appliance.c:389
#, c-format
msgid "security: cached appliance %s is not a directory (mode %o)"
msgstr ""

#: src/appliance.c:394
#, c-format
msgid "security: cached appliance %s is writable by group or other (mode %o)"
msgstr ""

#: src/appliance.c:735
msgid "external command failed, see earlier error messages"
msgstr ""

#: src/dbdump.c:84
msgid "unexpected end of output from db_dump command before end of header"
msgstr ""

#: src/dbdump.c:97 src/dbdump.c:109
msgid "unexpected line from db_dump command, no space prefix"
msgstr ""

#: src/dbdump.c:126
msgid "unexpected end of output from db_dump command before end of data"
msgstr ""

#: src/dbdump.c:208
msgid "unexpected non-hex digits in output of db_dump command"
msgstr ""

#: src/filearch.c:152
#, c-format
msgid "size of %s unreasonable (%<PRIi64> bytes)"
msgstr ""

#: src/filearch.c:260
msgid ""
"file-architecture API not available since this version of libguestfs was "
"compiled without the libmagic library"
msgstr ""

#: src/fuse.c:925
msgid "filesystem is already mounted in another thread"
msgstr ""

#: src/fuse.c:950
#, c-format
msgid "fuse_opt_add_arg: %s"
msgstr ""

#: src/fuse.c:967
#, c-format
msgid "fuse_mount: %s"
msgstr ""

#: src/fuse.c:985
#, c-format
msgid "fuse_new: %s"
msgstr ""

#: src/fuse.c:1014
msgid "you must call guestfs_mount_local first"
msgstr ""

#: src/fuse.c:1023
#, c-format
msgid "fuse_loop: %s"
msgstr ""

#: src/fuse.c:1076
msgid "no filesystem is mounted"
msgstr ""

#: src/fuse.c:1089
#, c-format
msgid "open: %s"
msgstr ""

#: src/fuse.c:1125
#, c-format
msgid "fusermount failed: %s: %s"
msgstr ""

#: src/fuse.c:1270
msgid "could not initialize dir cache hashtables"
msgstr ""

#: src/fuse.c:1524 src/fuse.c:1531 src/fuse.c:1539
msgid "FUSE not supported"
msgstr ""

#: src/guestfs.c:183
msgid ""
"invalid or unknown value for LIBGUESTFS_ATTACH_METHOD environment variable"
msgstr ""

#: src/guestfs.c:188
msgid ""
"libguestfs was built with an invalid default attach-method, using "
"'appliance' instead"
msgstr ""

#: src/guestfs.c:231
#, c-format
msgid "guestfs_close: called twice on the same handle\n"
msgstr ""

#: src/guestfs.c:400
#, c-format
msgid "warning: %s"
msgstr ""

#: src/guestfs.c:461
#, c-format
msgid "libguestfs: error: %s\n"
msgstr ""

#: src/guestfs.c:1060
#, c-format
msgid "<truncated, original size %zu bytes>"
msgstr ""

#: src/info.c:89
#, c-format
msgid "%s: cannot detect virtual size of disk image"
msgstr ""

#: src/info.c:105
#, c-format
msgid "cannot parse output of qemu-img info: '%s'"
msgstr ""

#: src/inspect-fs-unix.c:188
#, c-format
msgid "release file %s is empty or malformed"
msgstr ""

#: src/inspect-fs-unix.c:233 src/inspect-fs-unix.c:760
#: src/inspect-fs-unix.c:1444 src/inspect-fs.c:527 src/inspect-fs.c:572
#: src/inspect.c:622
#, c-format
msgid "size of %s is unreasonably large (%<PRIi64> bytes)"
msgstr ""

#: src/inspect-fs-unix.c:803
msgid "could not parse /etc/fstab or empty file"
msgstr ""

#: src/inspect-fs-windows.c:162
#, c-format
msgid "cannot resolve Windows %%SYSTEMROOT%%"
msgstr ""

#: src/inspect-fs.c:360 src/inspect-fs.c:373
#, c-format
msgid "could not parse integer in version number: %s"
msgstr ""

#: src/inspect-icon.c:581
#, c-format
msgid "read: %s: unexpected end of file"
msgstr ""

#: src/inspect.c:294
msgid "not a Windows guest, or systemroot could not be determined"
msgstr ""

#: src/inspect.c:310
msgid "not a Windows guest, or CurrentControlSet could not be determined"
msgstr ""

#: src/inspect.c:658
msgid "no inspection data: call guestfs_inspect_os first"
msgstr ""

#: src/inspect.c:670
#, c-format
msgid ""
"%s: root device not found: only call this function with a root device "
"previously returned by guestfs_inspect_os"
msgstr ""

#: src/launch-appliance.c:94
#, c-format
msgid "unclosed quote character (%c) in command line near: %s"
msgstr ""

#: src/launch-appliance.c:109
#, c-format
msgid "cannot parse quoted string near: %s"
msgstr ""

#: src/launch-appliance.c:136 src/launch-libvirt.c:121
msgid "you must call guestfs_add_drive before guestfs_launch"
msgstr ""

#: src/launch-appliance.c:643 src/launch-appliance.c:648
#: src/launch-libvirt.c:348 src/launch-libvirt.c:353
msgid "guestfs_launch failed, see earlier error messages"
msgstr ""

#: src/launch-appliance.c:661 src/launch-libvirt.c:366
msgid "qemu launched and contacted daemon, but state != READY"
msgstr ""

#: src/launch-appliance.c:757
#, c-format
msgid ""
"command failed: %s\n"
"errno: %s\n"
"\n"
"If qemu is located on a non-standard path, try setting the LIBGUESTFS_QEMU\n"
"environment variable.  There may also be errors printed above."
msgstr ""

#: src/launch-libvirt.c:127
msgid "direct mode flag is not supported yet for libvirt attach method"
msgstr ""

#: src/launch-libvirt.c:134
#, c-format
msgid "you must have libvirt >= %d.%d.%d to use the 'libvirt' attach-method"
msgstr ""

#: src/launch-libvirt.c:150
#, c-format
msgid "could not connect to libvirt (URI = %s)"
msgstr ""

#: src/launch-libvirt.c:166
msgid "could not get libvirt capabilities"
msgstr ""

#: src/launch-libvirt.c:289
msgid "could not create appliance through libvirt"
msgstr ""

#: src/launch-libvirt.c:431
#, c-format
msgid "error constructing libvirt XML at \"%s\""
msgstr ""

#: src/launch-libvirt.c:797
#, c-format
msgid "realpath: could not convert '%s' to absolute path"
msgstr ""

#: src/launch-libvirt.c:861
#, c-format
msgid ""
"could not auto-detect the format of '%s'\n"
"If the format is known, pass the format to libguestfs, eg. using the\n"
"'--format' option, or via the optional 'format' argument to 'add-drive'."
msgstr ""

#: src/launch-libvirt.c:1156
msgid "could not destroy libvirt domain"
msgstr ""

#: src/launch-libvirt.c:1187
#, c-format
msgid "%s: internal error forming error message"
msgstr ""

#: src/launch-libvirt.c:1212
#, c-format
msgid ""
"libvirt attach-method is not available because this version of libguestfs "
"was compiled without libvirt or libvirt < %d.%d.%d or without libxml2"
msgstr ""

#: src/launch-unix.c:43
msgid "cannot set qemu parameters with the 'unix:' attach method"
msgstr ""

#: src/launch-unix.c:86
msgid "guestfs_launch failed, unexpected initial message from guestfsd"
msgstr ""

#: src/launch-unix.c:94
msgid "contacted guestfsd, but state != READY"
msgstr ""

#: src/launch.c:150
msgid "for device '/dev/null', format must be 'raw'"
msgstr ""

#: src/launch.c:195 src/launch.c:283
msgid ""
"filename cannot contain ':' (colon) character. This is a limitation of qemu."
msgstr ""

#: src/launch.c:210 src/launch.c:215
#, c-format
msgid "%s parameter is empty or contains disallowed characters"
msgstr ""

#: src/launch.c:303
msgid "parameter must begin with '-' character"
msgstr ""

#: src/launch.c:317
#, c-format
msgid "parameter '%s' isn't allowed"
msgstr ""

#: src/launch.c:378
msgid "the libguestfs handle has already been launched"
msgstr ""

#: src/launch.c:520
#, c-format
msgid "%s: cannot create temporary directory"
msgstr ""

#: src/launch.c:559
msgid "get-pid can only be called after launch"
msgstr ""

#: src/launch.c:565
msgid "the current attach-method does not support 'get-pid'"
msgstr ""

#: src/launch.c:580
msgid "the current attach-method does not allow max disks to be queried"
msgstr ""

#: src/launch.c:594
msgid "qemu has not been launched yet"
msgstr ""

#: src/libvirtdomain.c:97 src/libvirtdomain.c:390
msgid "you cannot set both live and readonly flags"
msgstr ""

#: src/libvirtdomain.c:105
#, c-format
msgid "could not connect to libvirt (code %d, domain %d): %s"
msgstr ""

#: src/libvirtdomain.c:126
#, c-format
msgid "no libvirt domain called '%s': %s"
msgstr ""

#: src/libvirtdomain.c:186 src/libvirtdomain.c:513
#, c-format
msgid "error reading libvirt XML information: %s"
msgstr ""

#: src/libvirtdomain.c:196 src/libvirtdomain.c:521
msgid "unable to parse XML information returned by libvirt"
msgstr ""

#: src/libvirtdomain.c:202 src/libvirtdomain.c:527
msgid "unable to create new XPath context"
msgstr ""

#: src/libvirtdomain.c:209 src/libvirtdomain.c:542
msgid "unable to evaluate XPath expression"
msgstr ""

#: src/libvirtdomain.c:318
msgid "libvirt domain has no disks"
msgstr ""

#: src/libvirtdomain.c:384
msgid "unknown readonlydisk parameter"
msgstr ""

#: src/libvirtdomain.c:401
#, c-format
msgid "error getting domain info: %s"
msgstr ""

#: src/libvirtdomain.c:415
msgid ""
"error: domain is a live virtual machine.\n"
"Writing to the disks of a running virtual machine can cause disk "
"corruption.\n"
"Either use read-only access, or if the guest is running the guestfsd daemon\n"
"specify live access.  In most libguestfs tools these options are --ro or\n"
"--live respectively.  Consult the documentation for further information."
msgstr ""

#: src/libvirtdomain.c:480
#, c-format
msgid ""
"%s: disk is marked <readonly/> in libvirt XML, and readonlydisk was set to "
"\"error\""
msgstr ""

#: src/libvirtdomain.c:570
msgid ""
"this guest has no libvirt <channel> definition for guestfsd\n"
"See ATTACHING TO RUNNING DAEMONS in guestfs(3) for further information."
msgstr ""

#: src/libvirtdomain.c:593
msgid ""
"add-domain API not available since this version of libguestfs was compiled "
"without libvirt or libxml2"
msgstr ""

#: src/proto.c:374
#, c-format
msgid ""
"check_for_daemon_cancellation_or_eof: read 0x%x from daemon, expected 0x%x\n"
msgstr ""

#: src/proto.c:496
msgid ""
"This usually means the libguestfs appliance failed to start up.  Please\n"
"enable debugging (LIBGUESTFS_DEBUG=1) and rerun the command, then look at\n"
"the debug messages output prior to this error.\n"
msgstr ""

#: src/proto.c:502
msgid "See earlier debug messages.\n"
msgstr ""

#: src/proto.c:592
#, c-format
msgid "received magic signature from guestfsd, but in state %d"
msgstr ""

#: src/proto.c:611
#, c-format
msgid "message length (%u) > maximum possible size (%d)"
msgstr ""

#: src/proto.c:788
msgid "xdr_guestfs_message_header failed"
msgstr ""

#: src/proto.c:797
msgid "dispatch failed to marshal args"
msgstr ""

#: src/proto.c:893 src/proto.c:1191
msgid "operation cancelled by user"
msgstr ""

#: src/proto.c:956
#, c-format
msgid "xdr_guestfs_chunk failed (buf = %p, buflen = %zu)"
msgstr ""

#: src/proto.c:1117
#, c-format
msgid "%s: error in chunked encoding"
msgstr ""

#: src/proto.c:1145
msgid "write to daemon socket"
msgstr ""

#: src/proto.c:1168
msgid "receive_file_data: parse error in reply callback"
msgstr ""

#: src/proto.c:1173
msgid "receive_file_data: unexpected flag received when reading file chunks"
msgstr ""

#: src/proto.c:1181
msgid "failed to parse file chunk"
msgstr ""

#: src/proto.c:1195
msgid "file receive cancelled by daemon"
msgstr ""

#: test-tool/test-tool.c:67
#, c-format
msgid ""
"libguestfs-test-tool: interactive test tool\n"
"Copyright (C) 2009-2012 Red Hat Inc.\n"
"Usage:\n"
"  libguestfs-test-tool [--options]\n"
"Options:\n"
"  --help         Display usage\n"
"  --qemudir dir  Specify QEMU source directory\n"
"  --qemu qemu    Specify QEMU binary\n"
"  --timeout n\n"
"  -t n           Set launch timeout (default: %d seconds)\n"
"  --version\n"
"  -V             Display libguestfs version and exit\n"
msgstr ""

#: test-tool/test-tool.c:111
#, c-format
msgid "libguestfs-test-tool: failed to create libguestfs handle\n"
msgstr ""

#: test-tool/test-tool.c:117
#, c-format
msgid "libguestfs-test-tool: guestfs_version failed\n"
msgstr ""

#: test-tool/test-tool.c:133
#, c-format
msgid "libguestfs-test-tool: unknown long option: %s (%d)\n"
msgstr ""

#: test-tool/test-tool.c:142
#, c-format
msgid "libguestfs-test-tool: invalid timeout: %s\n"
msgstr ""

#: test-tool/test-tool.c:161
#, c-format
msgid "libguestfs-test-tool: unexpected command line option 0x%x\n"
msgstr ""

#: test-tool/test-tool.c:185
#, c-format
msgid "libguestfs-test-tool: failed to add drive '%s'\n"
msgstr ""

#: test-tool/test-tool.c:222
#, c-format
msgid "libguestfs-test-tool: failed to launch appliance\n"
msgstr ""

#: test-tool/test-tool.c:234
#, c-format
msgid "libguestfs-test-tool: failed to run part-disk\n"
msgstr ""

#: test-tool/test-tool.c:240
#, c-format
msgid "libguestfs-test-tool: failed to mkfs.ext2\n"
msgstr ""

#: test-tool/test-tool.c:246
#, c-format
msgid "libguestfs-test-tool: failed to mount /dev/sda1 on /\n"
msgstr ""

#: test-tool/test-tool.c:253
#, c-format
msgid "libguestfs-test-tool: failed to touch file\n"
msgstr ""

#: test-tool/test-tool.c:259
#, c-format
msgid "libguestfs-test-tool: shutdown failed\n"
msgstr ""

#: test-tool/test-tool.c:292
#, c-format
msgid ""
"LIBGUESTFS_QEMU environment variable is already set, so\n"
"--qemu/--qemudir options cannot be used.\n"
msgstr ""

#: test-tool/test-tool.c:300
#, c-format
msgid "Binary '%s' does not exist or is not executable\n"
msgstr ""

#: test-tool/test-tool.c:314
#, c-format
msgid "%s: does not look like a qemu source directory\n"
msgstr ""

#: tools/virt-list-filesystems.pl:150
msgid "virt-list-filesystems: no image or VM name given"
msgstr ""

#: tools/virt-list-partitions.pl:162
msgid "virt-list-partitions: no image or VM name given"
msgstr ""

#: tools/virt-make-fs.pl:306
msgid "virt-make-fs input output\n"
msgstr ""

#: tools/virt-make-fs.pl:336
msgid "unexpected output from 'du' command"
msgstr ""

#: tools/virt-make-fs.pl:348 tools/virt-make-fs.pl:362
#: tools/virt-make-fs.pl:547
#, perl-brace-format
msgid "{f}: unknown input format: {fmt}\n"
msgstr ""

#: tools/virt-make-fs.pl:413
#, perl-brace-format
msgid "virt-make-fs: cannot parse size parameter: {sz}\n"
msgstr ""

#: tools/virt-make-fs.pl:434
msgid "cannot dup STDOUT"
msgstr ""

#: tools/virt-make-fs.pl:435
msgid "cannot dup STDERR"
msgstr ""

#: tools/virt-make-fs.pl:438
msgid "cannot redirect STDOUT"
msgstr ""

#: tools/virt-make-fs.pl:439
msgid "cannot redirect STDERR"
msgstr ""

#: tools/virt-make-fs.pl:441
msgid "cannot restore STDOUT"
msgstr ""

#: tools/virt-make-fs.pl:442
msgid "cannot restore STDERR"
msgstr ""

#: tools/virt-make-fs.pl:445
msgid "qemu-img create: failed to create disk image:\n"
msgstr ""

#: tools/virt-make-fs.pl:461
msgid "virt-make-fs: NTFS support was disabled when libguestfs was compiled\n"
msgstr ""

#: tools/virt-make-fs.pl:531
msgid "tar: failed, see earlier messages\n"
msgstr ""

#: tools/virt-make-fs.pl:553
msgid "uncompress command failed, see earlier messages\n"
msgstr ""

#: tools/virt-make-fs.pl:587
msgid ""
"virt-make-fs: error copying contents into filesystem\n"
"An error here usually means that the program did not estimate the\n"
"filesystem size correctly.  Please read the BUGS section of the manpage.\n"
msgstr ""

#: tools/virt-tar.pl:193 tools/virt-tar.pl:200
msgid "virt-tar: extract/upload mode specified twice on the command line\n"
msgstr ""

#: tools/virt-tar.pl:222
msgid "virt-tar: no image, VM names, directory or filename given"
msgstr ""

#: tools/virt-tar.pl:225
msgid "virt-tar: either -x or -u must be specified on the command line\n"
msgstr ""

#: tools/virt-tar.pl:236
#, perl-brace-format
msgid "virt-tar: {tarball}: file not found\n"
msgstr ""

#: tools/virt-tar.pl:239
#, perl-brace-format
msgid "virt-tar: {dir}: directory name must start with '/' character\n"
msgstr ""

#: tools/virt-tar.pl:253 tools/virt-win-reg.pl:261
#, perl-brace-format
msgid ""
"{prog}: No operating system could be detected inside this disk image.\n"
"\n"
"This may be because the file is not a disk image, or is not a virtual "
"machine\n"
"image, or because the OS type is not understood by libguestfs.\n"
"\n"
"If you feel this is an error, please file a bug report including as much\n"
"information about the disk image as possible.\n"
msgstr ""

#: tools/virt-tar.pl:257 tools/virt-win-reg.pl:265
#, perl-brace-format
msgid "{prog}: multiboot operating systems are not supported.\n"
msgstr ""

#: tools/virt-win-reg.pl:245
msgid "no libvirt domain name or disk image given\n"
msgstr ""

#: tools/virt-win-reg.pl:287
msgid ""
"expecting 1 or 2 more parameters, subkey path and optionally the value to "
"export\n"
msgstr ""

#: tools/virt-win-reg.pl:446
#, perl-brace-format
msgid "virt-win-reg: {p}: cannot find user directory\n"
msgstr ""

#: tools/virt-win-reg.pl:451
#, perl-brace-format
msgid "virt-win-reg: {p}: not a supported Windows Registry path\n"
msgstr ""

#: tools/virt-win-reg.pl:522 tools/virt-win-reg.pl:544
#, perl-brace-format
msgid "virt-win-reg: {p}: file not found in guest: {err}\n"
msgstr ""

#: tools/virt-win-reg.pl:529
#, perl-brace-format
msgid "virt-win-reg: {p}: could not download registry file: {err}\n"
msgstr ""

#: tools/virt-win-reg.pl:551
#, perl-brace-format
msgid "virt-win-reg: {p}: could not upload registry file: {err}\n"
msgstr ""

#: ../resize/resize.ml:791
msgid "  An extra partition will be created for the surplus."
msgstr ""

#: ../resize/resize.ml:776 ../resize/resize.ml:757
msgid "  The %s on %s will be expanded using the '%s' method."
msgstr ""

#: ../resize/resize.ml:793
msgid "  The surplus space is not large enough for an extra partition to be created and so it will just be ignored."
msgstr ""

#: ../resize/resize.ml:795
msgid "  The surplus space will be ignored.  Run a partitioning program in the guest to partition this extra space if you want."
msgstr ""

#: ../sysprep/main.ml:207
msgid "%s (ignored)\n"
msgstr ""

#: ../sysprep/main.ml:58
msgid "%s: --domain option can only be given once\n"
msgstr ""

#: ../sysprep/main.ml:70
msgid "%s: --enable option can only be given once\n"
msgstr ""

#: ../sysprep/main.ml:82
msgid "%s: --enable: '%s' is not a known operation\n"
msgstr ""

#: ../resize/resize.ml:607
msgid "%s: This extended partition contains logical partitions which might be damaged by shrinking it.  If you want to shrink this partition, you need to use the '--resize-force' option, but that could destroy logical partitions within this partition.  (This error came from '%s' option on the command line.)"
msgstr ""

#: ../resize/resize.ml:773
msgid "%s: This logical volume will be expanded to maximum size."
msgstr ""

#: ../resize/resize.ml:603
msgid "%s: This partition has contains a %s filesystem which will be damaged by shrinking it below %Ld bytes (user asked to shrink it to %Ld bytes).  If you want to shrink this partition, you need to use the '--resize-force' option, but that could destroy any data on this partition.  (This error came from '%s' option on the command line.)"
msgstr ""

#: ../resize/resize.ml:599
msgid "%s: This partition has contains an LVM physical volume which will be damaged by shrinking it below %Ld bytes (user asked to shrink it to %Ld bytes).  If you want to shrink this partition, you need to use the '--resize-force' option, but that could destroy any data on this partition.  (This error came from '%s' option on the command line.)"
msgstr ""

#: ../resize/resize.ml:596
msgid "%s: This partition has unknown content which might be damaged by shrinking it.  If you want to shrink this partition, you need to use the '--resize-force' option, but that could destroy any data on this partition.  (This error came from '%s' option on the command line.)"
msgstr ""

#: ../resize/resize.ml:750
msgid "%s: This partition will be created, but the contents will be ignored (ie. not copied to the target)."
msgstr ""

#: ../resize/resize.ml:752
msgid "%s: This partition will be deleted."
msgstr ""

#: ../resize/resize.ml:748
msgid "%s: This partition will be left alone."
msgstr ""

#: ../resize/resize.ml:754
msgid "%s: This partition will be resized from %s to %s."
msgstr ""

#: ../resize/resize.ml:59
msgid "%s: empty --expand option"
msgstr ""

#: ../resize/resize.ml:271 ../resize/resize.ml:268
msgid "%s: file is too small to be a disk image (%Ld bytes)"
msgstr ""

#: ../resize/resize.ml:730
msgid "%s: logical volume not found in the source disk image (this error came from '--lv-expand' option on the command line).  Try running this command: virt-filesystems --logical-volumes --long -a %s"
msgstr ""

#: ../resize/resize.ml:625
msgid "%s: missing size field in '%s' option"
msgstr ""

#: ../resize/resize.ml:634
msgid "%s: new partition size is zero or negative"
msgstr ""

#: ../sysprep/main.ml:193
msgid "%s: no operating systems were found in the guest image\n"
msgstr ""

#: ../resize/resize.ml:545
msgid "%s: partition already deleted, you cannot use it in '%s' option"
msgstr ""

#: ../resize/resize.ml:541
msgid "%s: partition already ignored, you cannot use it in '%s' option"
msgstr ""

#: ../resize/resize.ml:537
msgid "%s: partition not found in the source disk image (this error came from '%s' option on the command line).  Try running this command: virt-filesystems --partitions --long -a %s"
msgstr ""

#: ../resize/resize.ml:424
msgid "%s: partition size %Ld < filesystem size %Ld"
msgstr ""

#: ../resize/resize.ml:419
msgid "%s: partition size %Ld < physical volume size %Ld"
msgstr ""

#: ../resize/resize.ml:349
msgid "%s: physical volume not returned by pvs_full"
msgstr ""

#: ../sysprep/main.ml:128
msgid "%s: reset or unconfigure a virtual machine so clones can be made\n\n virt-sysprep [--options] -d domname\n\n virt-sysprep [--options] -a disk.img [-a disk.img ...]\n\nA short summary of the options is given below.  For detailed help please\nread the man page virt-sysprep(1).\n"
msgstr ""

#: ../resize/resize.ml:115
msgid "%s: resize a virtual machine disk\n\nA short summary of the options is given below.  For detailed help please\nread the man page virt-resize(1).\n"
msgstr ""

#: ../sparsify/sparsify.ml:79
msgid "%s: sparsify a virtual machine disk\n\n virt-sparsify [--options] indisk outdisk\n\nA short summary of the options is given below.  For detailed help please\nread the man page virt-sparsify(1).\n"
msgstr ""

#: ../resize/resize.ml:581
msgid "%s: this partition has already been ignored or deleted"
msgstr ""

#: ../resize/resize.ml:577
msgid "%s: this partition has already been marked for resizing"
msgstr ""

#: ../resize/resize.ml:434
msgid "%s: this partition overlaps the previous one"
msgstr ""

#: ../resize/resize.ml:285
msgid "%s: unknown partition table type\nvirt-resize only supports MBR (DOS) and GPT partition tables."
msgstr ""

#: ../sysprep/main.ml:157
msgid "%s: you cannot give -a and -d options together\n"
msgstr ""

#: ../sysprep/main.ml:74
msgid "%s: you cannot pass an empty argument to --enable\n"
msgstr ""

#: ../sysprep/main.ml:148
msgid "%s: you must give either -a or -d options\n"
msgstr ""

#: ../resize/resize.ml:60
msgid "--expand option given twice"
msgstr ""

#: ../resize/resize.ml:77
msgid "--shrink option given twice"
msgstr ""

#: ../sysprep/main.ml:98 ../sysprep/main.ml:97
msgid "Add disk image file"
msgstr ""

#: ../sparsify/sparsify.ml:66
msgid "Add qemu-img options"
msgstr ""

#: ../sysprep/sysprep_operation_firstboot.ml:59
msgid "Add scripts to run once at next boot"
msgstr ""

#: ../resize/resize.ml:82
msgid "Align first partition (default: auto)"
msgstr ""

#: ../sysprep/sysprep_operation_lvm_uuids.ml:44
msgid "Change LVM2 PV and VG UUIDs"
msgstr ""

#: ../sysprep/sysprep_operation_hostname.ml:57
msgid "Change the hostname of the guest"
msgstr ""

#: ../sysprep/sysprep_operation_hostname.ml:66
msgid "Change the hostname.  If not given, defaults to C<localhost.localdomain>."
msgstr ""

#: ../sparsify/sparsify.ml:294
msgid "Clearing Linux swap on %s ...\n%!"
msgstr ""

#: ../sparsify/sparsify.ml:60
msgid "Compressed output format"
msgstr ""

#: ../sparsify/sparsify.ml:364
msgid "Copy to destination and make sparse ...\n%!"
msgstr ""

#: ../resize/resize.ml:1032
msgid "Copying %s ...\n%!"
msgstr ""

#: ../sparsify/sparsify.ml:195
msgid "Create overlay file to protect source disk ...\n%!"
msgstr ""

#: ../sparsify/sparsify.ml:62 ../resize/resize.ml:87
msgid "Debug GC and memory allocations"
msgstr ""

#: ../sysprep/main.ml:101
msgid "Debug GC and memory allocations (internal)"
msgstr ""

#: ../resize/resize.ml:88
msgid "Delete partition"
msgstr ""

#: ../sysprep/main.ml:119 ../sysprep/main.ml:118 ../sparsify/sparsify.ml:71
#. ../resize/resize.ml:109
msgid "Display version and exit"
msgstr ""

#: ../resize/resize.ml:84
msgid "Don't copy boot loader"
msgstr ""

#: ../resize/resize.ml:91
msgid "Don't create extra partition"
msgstr ""

#: ../resize/resize.ml:90
msgid "Don't expand content"
msgstr ""

#: ../resize/resize.ml:99
msgid "Don't perform changes"
msgstr ""

#: ../sysprep/main.ml:113 ../sysprep/main.ml:112
msgid "Don't print log messages"
msgstr ""

#: ../resize/resize.ml:104
msgid "Don't print the summary"
msgstr ""

#: ../sysprep/main.ml:107
msgid "Dump POD (internal)"
msgstr ""

#: ../sysprep/main.ml:108
msgid "Dump POD for options (internal)"
msgstr ""

#: ../sysprep/main.ml:117 ../sysprep/main.ml:116 ../sparsify/sparsify.ml:69
#. ../resize/resize.ml:85
msgid "Enable debugging messages"
msgstr ""

#: ../sysprep/main.ml:109
msgid "Enable specific operations"
msgstr ""

#: ../sysprep/main.ml:120 ../sparsify/sparsify.ml:73
msgid "Enable tracing of libguestfs calls"
msgstr ""

#: ../sparsify/sparsify.ml:231
msgid "Examine source disk ...\n%!"
msgstr ""

#: ../resize/resize.ml:230
msgid "Examining %s ...\n%!"
msgstr ""

#: ../sysprep/main.ml:178
msgid "Examining the guest ...\n%!"
msgstr ""

#: ../resize/resize.ml:94
msgid "Expand logical volume"
msgstr ""

#: ../resize/resize.ml:89
msgid "Expand partition"
msgstr ""

#: ../resize/resize.ml:1179
msgid "Expanding %s using the '%s' method ...\n%!"
msgstr ""

#: ../resize/resize.ml:1162
msgid "Expanding %s%s using the '%s' method ...\n%!"
msgstr ""

#: ../resize/resize.ml:850
msgid "Failed to initialize the partition table on the target disk.  You need to wipe or recreate the target disk and then run virt-resize again.\n\nThe underlying error was: %s"
msgstr ""

#: ../sparsify/sparsify.ml:278
msgid "Fill free space in %s with zero ...\n%!"
msgstr ""

#: ../sparsify/sparsify.ml:329
msgid "Fill free space in volgroup %s with zero ...\n%!"
msgstr ""

#: ../resize/resize.ml:1088
msgid "Fixing first NTFS partition boot record ...\n%!"
msgstr ""

#: ../sysprep/sysprep_operation_flag_reconfiguration.ml:35
msgid "Flag the system for reconfiguration"
msgstr ""

#: ../sysprep/sysprep_operation_net_hwaddr.ml:50
#. ../sysprep/sysprep_operation_net_hostname.ml:50
msgid "For Fedora and Red Hat Enterprise Linux,\nthis is removed from C<ifcfg-*> files."
msgstr ""

#: ../sysprep/main.ml:114
msgid "Force SELinux relabel"
msgstr ""

#: ../resize/resize.ml:102
msgid "Force ntfsresize"
msgstr ""

#: ../resize/resize.ml:107
msgid "Forcefully resize partition"
msgstr ""

#: ../sparsify/sparsify.ml:63 ../resize/resize.ml:92
msgid "Format of input disk"
msgstr ""

#: ../resize/resize.ml:103
msgid "Format of output disk"
msgstr ""

#: ../sparsify/sparsify.ml:61
msgid "Format of output disk (default: same as input)"
msgstr ""

#: ../sysprep/sysprep_operation_random_seed.ml:50
msgid "Generate random seed for guest"
msgstr ""

#: ../resize/utils.ml:81
msgid "If reporting bugs, run virt-resize with the '-d' option and include the complete output."
msgstr ""

#: ../sparsify/utils.ml:109
msgid "If reporting bugs, run virt-sparsify with the '-v' and '-x' options and include the complete output."
msgstr ""

#: ../sparsify/sparsify.ml:64
msgid "Ignore filesystem"
msgstr ""

#: ../resize/resize.ml:93
msgid "Ignore partition"
msgstr ""

#: ../sysprep/main.ml:111
msgid "List supported operations"
msgstr ""

#: ../sparsify/sparsify.ml:65 ../resize/resize.ml:98
msgid "Make output machine readable"
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:143
msgid "Mount point on host"
msgstr ""

#: ../sysprep/main.ml:115
msgid "Never do SELinux relabel"
msgstr ""

#: ../sysprep/sysprep_operation_hostname.ml:65
msgid "New hostname"
msgstr ""

#: ../sysprep/sysprep_operation_flag_reconfiguration.ml:36
msgid "Note that this may require user intervention when the\nguest is booted."
msgstr ""

#: ../sysprep/sysprep_operation_lvm_uuids.ml:45
msgid "On Linux guests that have LVM2 physical volumes (PVs) or volume groups (VGs),\nnew random UUIDs are generated and assigned to those PVs and VGs."
msgstr ""

#: ../sysprep/sysprep_operation_logfiles.ml:86
msgid "On Linux the following files are removed:\n\n%s"
msgstr ""

#: ../sysprep/main.ml:106 ../sysprep/main.ml:105 ../sysprep/main.ml:104
msgid "Perform a dry run"
msgstr ""

#: ../sparsify/sparsify.ml:67
msgid "Quiet output"
msgstr ""

#: ../sysprep/main.ml:158 ../sysprep/main.ml:149
msgid "Read virt-sysprep(1) man page for further information.\n"
msgstr ""

#: ../sysprep/sysprep_operation_ssh_userdir.ml:39
msgid "Remove \".ssh\" directories in the guest"
msgstr ""

#: ../sysprep/sysprep_operation_ca_certificates.ml:53
msgid "Remove CA certificates in the guest"
msgstr ""

#: ../sysprep/sysprep_operation_dhcp_client_state.ml:36
msgid "Remove DHCP client leases"
msgstr ""

#: ../sysprep/sysprep_operation_dhcp_server_state.ml:31
msgid "Remove DHCP server leases"
msgstr ""

#: ../sysprep/sysprep_operation_dovecot_data.ml:38
msgid "Remove Dovecot (mail server) data"
msgstr ""

#: ../sysprep/sysprep_operation_net_hostname.ml:49
msgid "Remove HOSTNAME in network interface configuration"
msgstr ""

#: ../sysprep/sysprep_operation_net_hwaddr.ml:49
msgid "Remove HWADDR (hard-coded MAC address) configuration"
msgstr ""

#: ../sysprep/sysprep_operation_kerberos_data.ml:46
msgid "Remove Kerberos data in the guest"
msgstr ""

#: ../sysprep/sysprep_operation_user_account.ml:65
msgid "Remove all the user accounts and their home directories.\nThe \"root\" account is not removed."
msgstr ""

#: ../sysprep/sysprep_operation_blkid_tab.ml:49
msgid "Remove blkid tab in the guest"
msgstr ""

#: ../sysprep/sysprep_operation_mail_spool.ml:36
msgid "Remove email from the local mail spool directory"
msgstr ""

#: ../sysprep/sysprep_operation_logfiles.ml:84
msgid "Remove many log files from the guest"
msgstr ""

#: ../sysprep/sysprep_operation_package_manager_cache.ml:40
msgid "Remove package manager cache"
msgstr ""

#: ../sysprep/sysprep_operation_ssh_userdir.ml:40
msgid "Remove the C<.ssh> directory of user \"root\" and any other\nusers who have a C<.ssh> directory in their home directory."
msgstr ""

#: ../sysprep/sysprep_operation_pam_data.ml:46
msgid "Remove the PAM data in the guest"
msgstr ""

#: ../sysprep/sysprep_operation_rhn_systemid.ml:37
msgid "Remove the RHN system ID"
msgstr ""

#: ../sysprep/sysprep_operation_ssh_hostkeys.ml:36
msgid "Remove the SSH host keys in the guest"
msgstr ""

#: ../sysprep/sysprep_operation_smolt_uuid.ml:41
msgid "Remove the Smolt hardware UUID"
msgstr ""

#: ../sysprep/sysprep_operation_abrt_data.ml:39
msgid "Remove the automatically generated ABRT crash data in\nC</var/spool/abrt/>."
msgstr ""

#: ../sysprep/sysprep_operation_bash_history.ml:39
msgid "Remove the bash history in the guest"
msgstr ""

#: ../sysprep/sysprep_operation_bash_history.ml:40
msgid "Remove the bash history of user \"root\" and any other users\nwho have a C<.bash_history> file in their home directory."
msgstr ""

#: ../sysprep/sysprep_operation_abrt_data.ml:38
msgid "Remove the crash data generated by ABRT"
msgstr ""

#: ../sysprep/sysprep_operation_puppet_data_log.ml:46
msgid "Remove the data and log files of puppet"
msgstr ""

#: ../sysprep/sysprep_operation_samba_db_log.ml:47
msgid "Remove the database and log files of Samba"
msgstr ""

#: ../sysprep/sysprep_operation_sssd_db_log.ml:45
msgid "Remove the database and log files of sssd"
msgstr ""

#: ../sysprep/sysprep_operation_machine_id.ml:37
msgid "Remove the local machine ID"
msgstr ""

#: ../sysprep/sysprep_operation_pacct_log.ml:51
msgid "Remove the process accounting log files"
msgstr ""

#: ../sysprep/sysprep_operation_user_account.ml:64
msgid "Remove the user accounts in the guest"
msgstr ""

#: ../sysprep/sysprep_operation_utmp.ml:35
msgid "Remove the utmp file"
msgstr ""

#: ../sysprep/sysprep_operation_yum_uuid.ml:35
msgid "Remove the yum UUID"
msgstr ""

#: ../sysprep/sysprep_operation_udev_persistent_net.ml:36
msgid "Remove udev persistent net rules"
msgstr ""

#: ../sysprep/sysprep_operation_udev_persistent_net.ml:37
msgid "Remove udev persistent net rules which map the guest's existing MAC\naddress to a fixed ethernet device (eg. eth0).\n\nAfter a guest is cloned, the MAC address usually changes.  Since the\nold MAC address occupies the old name (eg. eth0), this means the fresh\nMAC address is assigned to a new name (eg. eth1) and this is usually\nundesirable.  Erasing the udev persistent net rules avoids this."
msgstr ""

#: ../sysprep/sysprep_operation_cron_spool.ml:31
msgid "Remove user at-jobs and cron-jobs"
msgstr ""

#: ../resize/resize.ml:1199
msgid "Resize operation completed with no errors.  Before deleting the old disk, carefully check that the resized disk boots and works correctly.\n"
msgstr ""

#: ../resize/resize.ml:106
msgid "Resize partition"
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:118
msgid "Run arbitrary scripts against the guest"
msgstr ""

#: ../sysprep/sysprep_operation_firstboot.ml:77
msgid "Run script(s) once next time the guest boots.  You can supply\nthe I<--firstboot> option as many times as needed."
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:154
msgid "Run the named C<script> (a shell script or program) against the\nguest.  The script can be any program on the host.  The script's\ncurrent directory will be the guest's root directory.\n\nB<Note:> If the script is not on the $PATH, then you must give\nthe full absolute path to the script."
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:153
msgid "Script or program to run on guest"
msgstr ""

#: ../sysprep/main.ml:110
msgid "Set format (default: auto)"
msgstr ""

#: ../sysprep/main.ml:100 ../sysprep/main.ml:99
msgid "Set libvirt URI"
msgstr ""

#: ../sysprep/main.ml:103 ../sysprep/main.ml:102
msgid "Set libvirt guest name"
msgstr ""

#: ../resize/resize.ml:83
msgid "Set partition alignment (default: 128 sectors)"
msgstr ""

#: ../resize/resize.ml:829
msgid "Setting up initial partition table on %s ...\n%!"
msgstr ""

#: ../resize/resize.ml:108
msgid "Shrink partition"
msgstr ""

#: ../sparsify/sparsify.ml:383
msgid "Sparsify operation completed with no errors.  Before deleting the old disk, carefully check that the target disk boots and works correctly.\n"
msgstr ""

#: ../sysprep/sysprep_operation_firstboot.ml:60
msgid "Supply one of more shell scripts (using the I<--firstboot> option).\n\nThese are run the first time the guest boots, and then are\ndeleted.  So these are useful for performing last minute\nconfiguration that must run in the context of the guest\noperating system, for example C<yum update>.\n\nOutput or errors from the scripts are written to\nC<~root/virt-sysprep-firstboot.log> (in the guest).\n\nCurrently this is only implemented for Linux guests using\neither System V init, or systemd."
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:119
msgid "The C<script> module lets you run arbitrary shell scripts or programs\nagainst the guest.\n\nNote this feature requires FUSE support.  You may have to enable\nthis in your host, for example by adding the current user to the\nC<fuse> group, or by loading a kernel module.\n\nUse one or more I<--script> parameters to specify scripts or programs\nthat will be run against the guest.\n\nThe script or program is run with its current directory being the\nguest's root directory, so relative paths should be used.  For\nexample: C<rm etc/resolv.conf> in the script would remove a Linux\nguest's DNS configuration file, but C<rm /etc/resolv.conf> would\n(try to) remove the host's file.\n\nNormally a temporary mount point for the guest is used, but you\ncan choose a specific one by using the I<--scriptdir> parameter.\n\nB<Note:> This is different from I<--firstboot> scripts (which run\nin the context of the guest when it is booting first time).\nI<--script> scripts run on the host, not in the guest."
msgstr ""

#: ../sysprep/sysprep_operation_ssh_hostkeys.ml:37
msgid "The SSH host keys are regenerated (differently) next time the guest is\nbooted.\n\nIf, after cloning, the guest gets the same IP address, ssh will give\nyou a stark warning about the host key changing:\n\n @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@\n @    WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!     @\n @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@\n IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!"
msgstr ""

#: ../sysprep/sysprep_operation_machine_id.ml:38
msgid "The machine ID is usually generated from a random source during system\ninstallation and stays constant for all subsequent boots.  Optionally,\nfor stateless systems it is generated during runtime at boot if it is\nfound to be empty."
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:144
msgid "The mount point (an empty directory on the host) used when\nthe C<script> operation is enabled and one or more scripts\nare specified using I<--script> parameter(s).\n\nB<Note:> C<scriptdir> B<must> be an absolute path.\n\nIf I<--scriptdir> is not specified then a temporary mountpoint\nwill be created."
msgstr ""

#: ../sysprep/sysprep_operation_pacct_log.ml:52
msgid "The system wide process accounting will store to the pacct\nlog files if the process accounting is on."
msgstr ""

#: ../resize/resize.ml:714
msgid "There is a deficit of %Ld bytes (%s).  You need to make the target disk larger by at least this amount or adjust your resizing requests."
msgstr ""

#: ../resize/resize.ml:788
msgid "There is a surplus of %s."
msgstr ""

#: ../sysprep/sysprep_operation_utmp.ml:36
msgid "This file records who is currently logged in on a machine.  In modern\nLinux distros it is stored in a ramdisk and hence not part of the\nvirtual machine's disk, but it was stored on disk in older distros."
msgstr ""

#: ../sysprep/sysprep_operation_hostname.ml:58
msgid "This operation changes the hostname of the guest to the value\ngiven in the I<--hostname> parameter.\n\nIf the I<--hostname> parameter is not given, then the hostname is changed\nto C<localhost.localdomain>."
msgstr ""

#: ../sysprep/sysprep_operation_random_seed.ml:51
msgid "Write some random bytes from the host into the random seed file of the\nguest.\n\nSee L</RANDOM SEED> below."
msgstr ""

#: ../resize/resize.ml:685
msgid "You cannot use --expand when there is no surplus space to expand into.  You need to make the target disk larger by at least %s."
msgstr ""

#: ../resize/resize.ml:697
msgid "You cannot use --shrink when there is no deficit (see 'deficit' in the virt-resize(1) man page)."
msgstr ""

#: ../sysprep/sysprep_operation_yum_uuid.ml:36
msgid "Yum creates a fresh UUID the next time it runs when it notices that the\noriginal UUID has been erased."
msgstr ""

#: ../sparsify/sparsify.ml:74
msgid "Zero filesystem"
msgstr ""

#: ../sparsify/sparsify.ml:268
msgid "Zeroing %s ...\n%!"
msgstr ""

#: ../resize/resize.ml:152
msgid "alignment cannot be < 1"
msgstr ""

#: ../resize/resize.ml:490
msgid "btrfs-filesystem-resize"
msgstr ""

#: ../sparsify/sparsify.ml:356
msgid "cannot detect input disk format; use the --format parameter"
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:143
msgid "dir"
msgstr ""

#: ../sysprep/main.ml:103 ../sysprep/main.ml:102
msgid "domain"
msgstr ""

#: ../resize/resize.ml:76
msgid "empty --shrink option"
msgstr ""

#: ../sparsify/sparsify.ml:172
msgid "external command '%s' killed by signal %d"
msgstr ""

#: ../sparsify/sparsify.ml:174
msgid "external command '%s' stopped by signal %d"
msgstr ""

#: ../sparsify/sparsify.ml:377 ../sparsify/sparsify.ml:225
msgid "external command failed: %s"
msgstr ""

#: ../sysprep/main.ml:126
msgid "extra parameter on the command line"
msgstr ""

#: ../sysprep/main.ml:98 ../sysprep/main.ml:97
msgid "file"
msgstr ""

#: ../sysprep/firstboot.ml:57
msgid "firstboot: failed: "
msgstr ""

#: ../sysprep/main.ml:110 ../sparsify/sparsify.ml:63 ../sparsify/sparsify.ml:61
#. ../resize/resize.ml:103
#. ../resize/resize.ml:92
msgid "format"
msgstr ""

#: ../sparsify/sparsify.ml:74 ../sparsify/sparsify.ml:64
msgid "fs"
msgstr ""

#: ../sysprep/sysprep_operation_hostname.ml:65
msgid "hostname"
msgstr ""

#: ../sparsify/sparsify.ml:147
msgid "input filename '%s' contains a colon (':'); qemu-img command line syntax prevents us from using such an image"
msgstr ""

#: ../resize/resize.ml:97 ../resize/resize.ml:96 ../resize/resize.ml:95
#. ../resize/resize.ml:94
msgid "lv"
msgstr ""

#: ../resize/resize.ml:82
msgid "never|always|auto"
msgstr ""

#: ../resize/resize.ml:489
msgid "ntfsresize"
msgstr ""

#: ../sysprep/main.ml:109
msgid "operations"
msgstr ""

#: ../sparsify/sparsify.ml:66
msgid "option"
msgstr ""

#: ../sparsify/sparsify.ml:150
msgid "output filename '%s' contains a colon (':'); qemu-img command line syntax prevents us from using such an image"
msgstr ""

#: ../resize/resize.ml:108 ../resize/resize.ml:93 ../resize/resize.ml:89
#. ../resize/resize.ml:88
msgid "part"
msgstr ""

#: ../resize/resize.ml:107 ../resize/resize.ml:106
msgid "part=size"
msgstr ""

#: ../resize/resize.ml:887 ../resize/resize.ml:863
msgid "pread-device: short read"
msgstr ""

#: ../resize/resize.ml:487
msgid "pvresize"
msgstr ""

#: ../sparsify/sparsify.ml:303
msgid "pwrite: short write restoring swap partition header"
msgstr ""

#: ../sparsify/sparsify.ml:191
msgid "qemu-img version %g\n%!"
msgstr ""

#: ../resize/resize.ml:488
msgid "resize2fs"
msgstr ""

#: ../sysprep/sysprep_operation_firstboot.ml:76
msgid "run script once next time guest boots"
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:153
#. ../sysprep/sysprep_operation_firstboot.ml:76
msgid "script"
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:75
msgid "script failed"
msgstr ""

#: ../resize/resize.ml:83
msgid "sectors"
msgstr ""

#: ../sysprep/main.ml:254
msgid "sysprep operation failed: %s\n"
msgstr ""

#: ../sysprep/main.ml:266
msgid "sysprep operation failed: exception: %s\n"
msgstr ""

#: ../sysprep/main.ml:263
msgid "sysprep operation failed: internal error: Not_found exception was thrown\n"
msgstr ""

#: ../sysprep/main.ml:260
msgid "sysprep operation failed: internal error: assertion failed at %s, line %d, char %d\n"
msgstr ""

#: ../sysprep/main.ml:257
msgid "sysprep operation failed: internal error: invalid argument: %s\n"
msgstr ""

#: ../resize/resize.ml:374
msgid "the source disk has no partitions"
msgstr ""

#: ../resize/resize.ml:161
msgid "unknown --align-first option: use never|always|auto"
msgstr ""

#: ../sysprep/main.ml:100 ../sysprep/main.ml:99
msgid "uri"
msgstr ""

#: ../resize/resize.ml:190
msgid "usage is: %s [--options] indisk outdisk"
msgstr ""

#: ../resize/resize.ml:43
msgid "virt-resize %Ld.%Ld.%Ld%s\n"
msgstr ""

#: ../resize/utils.ml:77
msgid "virt-resize: error: "
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:31
msgid "virt-sysprep: --scriptdir cannot be used more than once\n"
msgstr ""

#: ../sysprep/sysprep_operation.ml:113
msgid "virt-sysprep: POD for %s must not end with newline\n"
msgstr ""

#: ../sysprep/sysprep_operation.ml:90
msgid "virt-sysprep: disallowed character (%c) in operation name\n"
msgstr ""

#: ../sysprep/sysprep_operation.ml:74
msgid "virt-sysprep: duplicate operation name (%s)\n"
msgstr ""

#: ../sysprep/sysprep_operation.ml:100
msgid "virt-sysprep: heading for %s must not end with newline or period\n"
msgstr ""

#: ../sysprep/sysprep_operation.ml:109
msgid "virt-sysprep: operation %s has no POD\n"
msgstr ""

#: ../sysprep/sysprep_operation.ml:96
msgid "virt-sysprep: operation %s has no heading\n"
msgstr ""

#: ../sysprep/sysprep_operation.ml:83
msgid "virt-sysprep: operation name is an empty string\n"
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:65
msgid "virt-sysprep: script: failed (code %d)\n"
msgstr ""

#: ../sysprep/sysprep_operation_script.ml:69
msgid "virt-sysprep: script: killed by signal (%d)\n"
msgstr ""

#: ../sparsify/sparsify.ml:185
msgid "warning: failed to read qemu-img version\n  line: %S\n  message: %s\n%!"
msgstr ""

#: ../resize/resize.ml:1085
msgid "warning: first partition is NTFS but does not contain NTFS boot loader magic\n%!"
msgstr ""

#: ../resize/resize.ml:673
msgid "you cannot use options --expand and --shrink together"
msgstr ""

#: ../sparsify/sparsify.ml:131 ../resize/resize.ml:196
msgid "you cannot use the same disk image for input and output"
msgstr ""