libguestfs.git - [MIRROR] library for accessing and modifying guest disk images

diff options

author	Matthew Booth <mbooth@redhat.com>	2009-09-11 10:33:32 +0100
committer	Matthew Booth <mbooth@redhat.com>	2009-09-11 17:18:18 +0100
commit	02ae70474d418b202b6a8411daa54f8dfc790206 (patch)
tree	58c7d3b6fe99ce9f4ba53e69e8f46d9913506a46 /python/run-python-tests
parent	006873b92da9d0a5c7d9008bd94caabe0028e4c0 (diff)

generator.ml: Fix string list memory leak

Parsed string lists are allocated by malloc, but were never freed.

Diffstat (limited to 'python/run-python-tests')

0 files changed, 0 insertions, 0 deletions

/* * (C) Copyright 2001 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * board/config.h - configuration options, board specific */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options * (easy to change) */ #define CONFIG_MPC860 1 #define CONFIG_AMX860 1 #undef CONFIG_8xx_CONS_SMC1 /* Console is on SCC2 */ #undef CONFIG_8xx_CONS_SMC2 #define CONFIG_8xx_CONS_SCC2 1 #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 9600 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define MPC8XX_FACT 10 /* Multiply by 10 */ #define MPC8XX_XIN 5000000 /* 5 MHz in */ #define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT)) #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif #define CONFIG_BOOTCOMMAND \ "bootp;" \ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ "bootm" /* autoboot command */ #undef CONFIG_BOOTARGS #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ #define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */ #define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */ #endif #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_DHCP | \ CFG_CMD_DATE ) #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x0100000 /* memtest works on */ #define CFG_MEMTEST_END 0x0200000 /* 1 ... 4 MB in DRAM */ #define CFG_LOAD_ADDR 0x00100000 #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ /*----------------------------------------------------------------------- * Internal Memory Mapped Register */ #define CFG_IMMR 0xFF000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ #define CFG_INIT_RAM_ADDR CFG_IMMR #define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0x40000000 #if defined(DEBUG) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ #endif #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ /* * U-Boot for AMX board supports two types of memory extension * modules: one that provides 4 MB flash memory, and another one with * 16 MB EDO DRAM. * * The flash module swaps the CS0 and CS1 signals: if the module is * installed, CS0 is connected to Flash on the module and CS1 is * connected to the on-board Flash. This means that you must intall * U-Boot when the Flash module is plugged in, if you plan to use * it. * * To enable support for the DRAM extension card, CONFIG_AMX_RAM_EXT * must be defined. The DRAM module uses CS1. * * Only one of these modules may be installed at a time. If U-Boot * is compiled with the CONFIG_AMX_RAM_EXT option set, it will not * work if the Flash extension module is installed instead of the * DRAM module. */ #define CONFIG_AMX_RAM_EXT /* 16Mb Ext. DRAM module support */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. * * Use 4 MB for without and 8 MB with 16 MB DRAM extension module * (CONFIG_AMX_RAM_EXT) */ #ifdef CONFIG_AMX_RAM_EXT # define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #else # define CFG_BOOTMAPSZ (4 << 20) /* Initial Memory map for Linux */ #endif


context:
space:
mode: