The information in this chapter describes how to use panels. panelsintroduction A panel is an area on your desktop from which you can run applications and applets, and perform other tasks. When you start a session for the first time, the desktop contains the following panels: Menu Panel Edge panel at the bottom of the desktop The following sections describe these panels. Menu Panelintroduction panelsMenu Panel Menu PanelThe Menu Panel stretches the full length of the top edge of your screen. The Menu Panel includes textual rather than graphical menus. shows the Menu Panel. Your system administrator might have set your default Menu Panel according to your local requirements, so you might see a slightly different Menu Panel.

Shows the default Menu Panel. The context describes the graphic.

Menu Paneldefault contents The typical Menu Panel contains the following objects: Object Description Applications menu The Applications menu contains the standard GNOME applications. Actions menu The Actions menu provides commands that enable you to perform desktop tasks. Home folder launcherClick on this launcher to open your home folder in a Nautilus file manager window. Terminal launcher Click on this launcher to start the Terminal application. Terminal provides access to a UNIX command line. Volume Control applet Volume Control enables you to control the volume of the speaker on your system. Clock applet Clock shows the current time. Click on the time readout to display a menu of clock commands. Menu Panel window list iconWindow list iconThe window list is a list of all your open windows. To give focus to a window, click on the icon at the extreme right of the Menu Panel, then choose the window. Unlike other types of panel, you can only have one Menu Panel at a time on your desktop. panelsbottom edge panel bottom edge panelbottom edge panel introductionOn startup, an edge panel stretches the full length of the bottom edge of the desktop. shows a typical bottom edge panel. Your system administrator might have set your default bottom edge panel according to your local requirements, so you might see a slightly different bottom edge panel.

Shows the bottom edge panel. The context describes the graphic.

bottom edge paneldefault contents The bottom edge panel contains the following applets: Window List: Displays a button for each window that is open. Window List enables you to minimize and restore windows. Workspace Switcher: Enables you to navigate between your workspaces. You can change the behavior and appearance of your bottom edge panel to suit your requirements. You can also add or remove objects from your bottom edge panel. You can create multiple panels, and choose different properties, objects, and backgrounds for each panel. You can also hide panels. panelsmanaging The following sections describe how to manage your panels. panelsadding new You can add different types of panels to your desktop. lists the types of panel that you can add, and their characteristics. Panel TypeSnap Behavior SizeCorner Panel Snaps to one of the edges of the screen, but can only snap to the center or the corner of the edge. Stretches as much as required to display the objects on the panel.Edge Panel Snaps to one of the edges of the screen. The startup panel at the bottom of the desktop is an example of an edge panel. Stretches the full length of the edge that the panel snaps to. Floating Panel Does not snap to anything. You can place a floating panel anywhere on your desktop.Stretches as much as required to display the objects on the panel.Sliding Panel Snaps to one of the edges of the screen, can snap to any point on the edge. Stretches as much as required to display the objects on the panel.Menu Panel Snaps to the top edge of the screen. You cannot move the Menu Panel. Stretches the full length of the top edge of the screen. You can only have one Menu Panel on your desktop. To add a panel perform the following steps: Right-click on a vacant space on any panel, then choose New Panel. Choose the type of panel that you want to add. The new panel is added to the desktop. The new panel contains no objects, except for a Menu Panel. You can customize the new panel to suit your preferences. panelsinteracting with To interact with a panel, you must left-click, middle-click, or right-click on a vacant space on the panel. You can also middle-click or right-click on one of the hide buttons to select the panel, if the panel has no vacant space. If the hide buttons are not visible on a panel, modify the properties of the panel so that the hide buttons are visible. You use the mouse buttons to interact with a panel in the following ways: Middle-click Enables you to grab a panel, then drag the panel to a new location. Right-click Opens the panel popup menu. panelsmoving You can move panels to different locations on your desktop. To move a panel, middle-click and hold on any vacant space on the panel, then drag the panel to the new location. When you drag a floating panel, the panel follows the mouse pointer. The panel does not snap to any part of the desktop. When you drag a corner panel, an edge panel, or a sliding panel, the panel snaps to the edge of the screen. You cannot move the Menu Panel. panelshiding You can hide or show panels, except for the Menu Panel. To hide a panel, use a hide button. If the hide buttons are not visible on a panel, modify the panel properties so that the hide buttons are visible. Hide buttons are at either end of a panel. The hide buttons contain an optional arrow icon. The following illustration shows hide buttons. Shows a horizontal panel and a vertical panel, both with hide buttons. To hide a panel, click on one of the hide buttons. The panel reduces in the direction of the arrow on the hide button. The hide button at the other end of the panel remains visible. To show a hidden panel again, click on the visible hide button. The panel expands in the direction of the arrow on the hide button. Both hide buttons are now visible. You can set a panel to autohide. When you set autohide, the panel hides automatically when the mouse is not pointing to the panel. The panel reappears when you point to the part of the screen where the panel resides. To set your panel to autohide, modify the properties of the panel. On a corner panel, the behavior of the hide buttons is slightly different. If the panel is in one of the corners of the screen, you can use the hide buttons as follows: To hide the panel, click the hide button that is closest to the edge of the screen, as normal. To move the panel to the opposite corner of the screen, click the hide button that is farthest from the edge of the screen. panelsmodifying properties To modify preferences for all panels, choose ApplicationsDesktop Preferences AdvancedPanel , then make the changes that you require. For example, you can specify various settings related to the appearance and behavior of panel objects. You can also modify properties for each individual panel. You can change the features for each panel, such as the type of the panel, the hide behavior, and the visual appearance. You cannot modify properties for the Menu Panel. To modify the properties of a panel perform the following steps: Right-click on a vacant space on the panel, then choose Properties to display the Panel Properties dialog. The Panel Properties dialog contains the following tabbed sections: Panel_type Panel Background To modify panel size, position, and hiding properties, click on the Panel_type Panel tab. The following table describes the dialog elements on the Panel_type Panel tabbed section: Dialog ElementDescription Position Select the position of the panel on your desktop. Click on the required position for the panel. SizeSelect the size of the panel. Orient horizontally Floating panel only. Select this option to display the panel horizontally. Orient vertically Floating panel only. Select this option to display the panel vertically. Horizontal offset Floating panel only. Use the spin box to specify the distance of the panel from the left edge of the desktop. Vertical offset Floating panel only. Use the spin box to specify the distance of the panel from the top edge of the desktop. Screen edge offset Sliding panel only. Use this spin box to specify the distance between your panel and the edge of the desktop, in pixels. Autohide Select this option to enable autohide. Show hide buttons Select this option to display hide buttons on your panel. Arrows on hide button Select this option to display arrows on the hide buttons, if the hide button is enabled. To modify the panel background, click on the Background tab. The Background tabbed section contains the following elements: Dialog ElementDescription Background Type Choose the type of background for the panel. The choices are as follows: Default: The default background type. The standard background depends on the settings in Applications Desktop Preferences Theme. Color: Enables you to choose a color for the panel background. Image: Enables you to choose an image for the panel background. Background Color If Background Type is Color, click on the Color to use button to display the color selector dialog. Choose the color that you require from the color selector dialog. Image If Background Type is Image, choose the image to use on the background of the panel. Specify the following settings for the image background: Do not scale image to fit Select this option to tile the background image to fit the panel background. Scale image Select this option to scale the background image to fit the panel background. The width-to-height ratio of the image is retained. Stretch image Select this option to stretch the background image to fit the panel background. The width-to-height ratio of the image is not retained. Rotate image for vertical panels Select this option to rotate the background image on a vertical panel. You can also drag a color or image on to a panel to set the color or image as the background of the panel. For more information, see . Click Close to close the Panel Properties dialog. panelschanging background You can drag a color or image on to a panel to set the color or image as the background of the panel. You can drag a color or image from many applications. For example, you can drag a color from the Nautilus file manager to a panel to set the color as the background of the panel. You can also drag a color from any color selector dialog. You can drag an image to a panel to set the image as the background of the panel. You can also drag pattern images from the Nautilus file manager application to set the background of the panel. panelsdeleting To delete a panel from the desktop, right-click on the panel that you want to delete, then choose Delete This Panel . You must always have at least one panel on your desktop. If you have only one panel on your desktop, you cannot delete that panel. panelspanel objects panel objectsThis section describes the objects that you can add to your panels, and use from your panels. panel objectsinteracting with You use the mouse buttons to interact with a panel object in the following ways: Left-click Launches the panel object. Middle-click Enables you to grab an object, then drag the object to a new location. Right-click Opens the panel object popup menu. You interact with applet panel objects in a different way. For more information, see . panel objectsadding You can add an object to a panel in several ways, as follows: From the panel popup menu Right-click on a vacant space on a panel to open the panel popup menu. The panel popup menu contains an Add to Panel submenu. The Add to Panel submenu enables you to add the following objects to your panels: Accessory applets Amusement applets Internet applets Multimedia applets Utility applets Launchers GNOME Menu Drawers Log Out button Lock button From any menu When you right-click on a launcher in any menu, a popup menu for the launcher opens. You can use this popup menu to add the launcher to a panel. You can also drag menus, launchers, and applets from menus to panels. From the file manager Each launcher and applet corresponds to a .desktop file. You can drag the .desktop file on to your panels to add the launcher or applet to the panel. Each menu corresponds to a directory. You can drag the directory on to your panels to add the directory to the panel as a menu object. panel objectsmodifying properties Some panel objects have a set of associated properties. The properties are different for each type of object. The properties specify details such as the following: The command that starts a launcher application. The location of the source files for a menu. The icon that represents the object. To modify the properties of an object perform the following steps: panel object popup menu, illustration Right-click on the object to open the panel object popup menu, as shown in .

Shows panel object popup menu. Menu items: Properties, Help, Remove From Panel, Move.

Choose Properties. Use the Properties dialog to modify the properties as required. The properties in the Properties dialog depend on which object you select in step 1. Click OK to apply the changes, then close the Properties dialog. panel objectsmoving You can move panel objects within a panel, and from one panel to another panel. You can also move objects between panels and drawers. To move a panel object, middle-click and hold on the object and drag the object to a new location. When you release the middle mouse button, the object anchors at the new location. Alternatively, you can use the panel object popup menu to move an object, as follows: Right-click on the object, then choose Move. Point to the new location for the object, then click any mouse button to anchor the object to the new location. This location can be on any panel that is currently on your desktop. Movement of a panel object affects the position of other objects on the panel. To control how objects move on a panel, you can specify a movement mode. To specify the movement mode, press one of the following keys as you move the panel object: Key Movement ModeDescription No keySwitched movementThe object swaps places with other panel objects. Switched movement is the default movement mode. Alt key Free movementThe object jumps over other panel objects into the next vacant space on the panel. Shift key Push movementThe object pushes other panel objects further along the panel. panel objectsremoving To remove an object from a panel right-click on the object to open the panel object popup menu, then choose Remove From Panel. appletsintroduction panel objectsapplets appletsAn applet is a small application whose user interface resides within a panel. You use the applet panel object to interact with the applet. For example, the following figure shows the following applets, from left to right: Window List: Displays the windows currently open on your system. CD Player: Enables you to control the compact disc player on your system. Volume Control: Enables you to control the volume of the speaker on your system. Shows sample applets. The context describes the graphic. appletsadding to panel You can add an applet to a panel from the panel popup menu. Right-click on any vacant space on the panel to open the panel popup menu. Choose Add to Panel, then choose the applet that you want to add from one of the following submenus: Accessories Amusements Internet Multimedia Utility Alternatively, drag the applet from the submenu on to the panel. appletsselecting To modify the properties of an applet, you must first right-click on the applet to display the panel object popup menu. To move an applet, you must middle-click on the applet. Some restrictions apply on where you can click on an applet in order to display the panel object popup menu, or to move the applet, as follows: Some applets have popup menus of applet-specific commands that open when you right-click on particular parts of the applet. For example, the Window List applet has a vertical handle on the left side, and buttons that represent your windows on the right side. To open the panel object popup menu for the Window List applet, you must right-click on the handle. If you right-click on a button on the right side, a popup menu for the button opens. Some applets have areas that you cannot use to select the applet. For example, the Command Line applet has a field in which you enter commands. You cannot middle-click or right-click on this field to select the applet. Instead, middle-click or right-click on another part of the applet. appletsmodifying preferences To modify the preferences for an applet perform the following steps: Right-click on the applet, then choose Preferences . Use the Preferences dialog to modify the preferences as required. The preferences for applets vary depending on the applet. Click Close to close the Preferences dialog. panel objectslaunchers launchersWhen you click on a launcher, you initiate one of the following actions: Start a particular application. Execute a command. Open a folder in a file manager window. Open a browser at a particular Uniform Resource Locator (URL). A URL is the address of a particular location on the Web. You can find launchers in the following places on the desktop: Panels: On panels, launchers are represented by icons. Menus: On menus, launchers are represented by menu items. The menu items usually have an icon beside the menu item. Desktop background: On the desktop background, launchers are represented by icons. You can modify the properties of a launcher. For example, the properties of a launcher include the name of the launcher, the icon that represents the launcher, and how the launcher runs. launchersadding to panel You can add a launcher to a panel in one of the following ways: From the panel popup menu To create a new launcher, right-click on any vacant space on the panel, then choose Add to Panel Launcher. A Create Launcher dialog is displayed. For more information on how to complete this dialog, see . Alternatively, to add an existing launcher to the panel, choose Add to PanelLauncher from menu from the panel popup men. Choose the launcher that you want to add from the menu. From any menu To add a launcher to a panel from any menu, perform one of the following steps: Open the menu that contains the launcher from the panel where you want the launcher to reside. Right-click on the title of the launcher. Choose Add this launcher to panel. Open a menu that contains the launcher. Drag the launcher on to the panel. From the file manager To add a launcher to a panel from the file manager, find the .desktop file for the launcher in your file system. To add the launcher drag the .desktop file to the panel. To create a launcher with the Create Launcher dialog perform the following steps: Right-click on any part of a panel to open the panel popup menu. Choose Add to Panel Launcher to display the Create Launcher dialog. The dialog displays the Basic tabbed section. Enter the properties of the launcher in the dialog. The following table describes the dialog elements on the Basic tabbed section: Dialog ElementDescription NameUse this text box to specify the name of the launcher. You can use the Advanced tab to add translations of the name. This name is the name that appears when you add the launcher to a menu or to the desktop background. Generic name Use this text box to specify the class of application to which the launcher belongs. For example, you might type Text Editor in this text box for a gedit launcher. You can use the Advanced tab to add translations of the generic name. Comment Use this text box to specify a short description of the launcher. The comment is displayed as a tooltip when you point to the launcher icon on the panel. You can use the Advanced tabbed section to add translations of the comment. Command Use this field to specify a command to execute when you click on the launcher. TypeUse this drop-down combination box to specify the type of launcher. Select from the following: Application: Select this option to create a launcher that starts an application. Link: Select this option to create a launcher that links to a file, folder, or FTP site. IconChoose an icon to represent the launcher. To choose an icon, click on the No Icon button. An icon selector dialog is displayed. Choose an icon from the dialog. Alternatively, to choose an icon from another directory, click Browse. When you choose an icon, click OK. Run in Terminal Select this option to run the application or command in a terminal window. Choose this option for an application or command that does not create a window in which to run. To set advanced properties for the launcher, click on the Advanced tab. The Launcher Properties dialog displays the Advanced tabbed section. Enter the advanced properties of the launcher in the dialog. The following table describes the dialog elements on the top part of the Advanced tabbed section: Dialog ElementDescription Try this before using Enter a command here to check before starting the launcher. If the command is executable and is in your path, the launcher appears on the panel. Documentation This field is not currently in use. You can also add a translation of the Name, Generic name, and Comment fields from the Basic tabbed section. To add a translation, enter the details of the translation in the Name/Comment translations table as follows: Field Description First field Enter the two-letter code for the language for which you want to add a translation. Second field Enter the translation of the Name of the launcher. Third field Enter the translation of the Generic name of the launcher. Fourth field Enter the translation for the Comment for the launcher. Then click on the Add/Set button. To edit a translation, select the translation. The translated text appears in the lower part of this dialog. Edit the fields as required, then click on the Add/Set button. To remove a translation, select the translation, then click on the Remove button. To create the launcher and close the Launcher Properties dialog, click OK. launchersmodifying properties To modify the properties of a launcher perform the following steps: Right-click on the launcher to open the panel object popup menu. Choose Properties. Use the Launcher Properties dialog to modify the properties as required. For more information on the Launcher Properties dialog, see . Click Close to close the Launcher Properties dialog. menusadding to panel panel objectsmenus You can add the following types of menu to your panels: System menus: System menus contain the standard applications and tools that you can use on your desktop. The Applications menu and Actions menu are system menus. To add a system menu to a panel, right-click on a launcher in the menu, then choose Entire menuAdd this as menu to panel . GNOME Menu: You can access almost all of the standard applications, commands, and configuration options from the GNOME Menu. To add a GNOME Menu to a panel, right-click on any vacant space on the panel, then choose Add to PanelGNOME Menu. You can add as many GNOME Menu objects to your panels as you want. By default, the GNOME Menu is represented on panels by a stylized footprint icon, as follows: Shows GNOME Menu icon. Menus that you add to your panels are represented by an icon with an arrow. The arrow indicates that the icon represents a menu or drawer. shows how menus typically appear on panels.

Shows typical menu objects on panel.

panel objectsdrawers drawersA drawer is an extension of a panel. You can open and close a drawer in the same way that you can show and hide a panel. A drawer can contain all panel objects, including launchers, menus, applets, other panel objects, and other drawers. When you open a drawer, you can use the objects in the same way that you use objects on a panel. The following figure shows an open drawer that contains two panel objects. Shows an open drawer. The context describes the graphic. The arrow on the drawer icon indicates that the icon represents a drawer or menu. You can add, move, and remove objects from drawers in the same way that you add, move, and remove objects from panels. drawersopening drawersclosing To open a drawer, click on the drawer object in a panel. You can close a drawer in the following ways: Click on the drawer. Click on the drawer hide button. drawersadding to panel You can add a drawer to a panel in the following ways: From the panel popup menu Right-click on any vacant space on the panel, then choose Add to PanelDrawer. From any menu You can add a menu as a drawer object to a panel. To add a menu as a drawer to a panel, open the menu from the panel. Right-click on any launcher in the menu, then choose Entire menuAdd this as drawer to panel . drawersadding objects to You add an object to a drawer in the same way that you add objects to panels. For more information, see . drawersmodifying properties To modify preferences for all panels and drawers, choose ApplicationsDesktop Preferences AdvancedPanel , then make the changes that you require. For example, you can select various options related to the appearance and behavior of objects on panels and drawers. You can also select options that relate to drawers only. For example, you can select an option to close your drawers when you click on a launcher in the drawer. You can also modify other properties for each individual drawer. You can change features for each drawer, such as the visual appearance of the drawer and whether the drawer has hide buttons. To modify properties for a drawer perform the following steps: Right-click on the drawer, then choose Properties to display the Panel Properties dialog. The dialog displays the Drawer tabbed section. Select the properties for the drawer in the dialog. The following table describes the elements on the Drawer tabbed section: Dialog ElementDescription Size Select the size of the drawer. Tooltip/Name Use this text box to specify a name for the drawer. The name appears as a tooltip when you point at the drawer on the panel. IconChoose an icon to represent the drawer. Click on the Icon button to display an icon selector dialog. Choose an icon from the dialog. Alternatively, click Browse to choose an icon from another directory. When you choose an icon, click OK. Enable hide button Select this option to display a hide button when the drawer opens. Enable hide button arrow Select this option to display an arrow on the hide button if the hide button is enabled. You can use the Background tabbed section to set the background for the drawer. For information on how to complete the Background tabbed section, see the step on this topic in . You can also drag a color or image on to a drawer to set the color or image as the background of the drawer. For more information, see . Click Close to close the Panel Properties dialog. Shows Log Out icon. panel objectsLog Out button Log Out button The Log Out button begins the process to log out of a GNOME session. To add a Log Out button to a panel, right-click on any vacant space on the panel. Choose Add to Panel Log Out Button. To log out of your session or shut down your system, click on the Log Out button. Shows Lock icon. panel objectsLock button Lock button locking screenThe Lock button locks your screen and activates your screensaver. To access your session again, you must enter your password. To lock your screen correctly, you must have a screensaver enabled. To add a Lock button to a panel, right-click on any vacant space on the panel. Choose Add to Panel Lock Button. Right-click on the Lock button to open a menu of screensaver-related commands. describes the commands that are available from the menu. Menu Item FunctionActivate Screensaver Activates the screensaver immediately, but does not lock the screen.Lock Screen Locks the screen immediately. This command performs the same function as when you click on the Lock button. Kill Screensaver Daemon Terminates the screensaver process. After you terminate the screensaver process, you cannot lock your screen.Restart Screensaver Daemon Terminates and restarts the screensaver process. Use this command after you change your password. When you restart the screensaver process, use your new password with the screensaver.Properties Displays an XScreenSaver dialog that you can use to configure the screensaver.