fan: fix syntax of mof file

1 files changed, 27 insertions, 27 deletions

diff --git a/mof/Cura_Fan.mof b/mof/Cura_Fan.mof
index b632889..f10ac65 100644
--- a/mof/Cura_Fan.mof
+++ b/mof/Cura_Fan.mof
@@ -13,19 +13,19 @@
 class Cura_Fan : CIM_Fan {
 
      [ Key, Override("DeviceID"),
-       Description("Uniquely identifies fan. It is a composition of
-       SysPath and Name glued with slash ('/').") ]
+       Description("Uniquely identifies fan. It is a composition of "
+       "SysPath and Name glued with slash ('/').") ]
      string DeviceID;
 
      [ Override("Name"),
        Description("Name of fan provided by system.") ]
     string Name;
 
-     [ Description("Array of fan features, that are exposed through system
-     interface. In other words: those that are readible/writable."),
+     [ Description("Array of fan features, that are exposed through system "
+       " interface. In other words: those that are readible/writable."),
        ValueMap { "1", "2", "3", "4", "5", "6", "7", "8" },
        Values { "MinSpeed", "MaxSpeed", "Divisor", "Pulses", "Beep", 
-	"Alarm", "MinAlarm", "MaxAlarm" }
+                "Alarm", "MinAlarm", "MaxAlarm" }
      ]
     uint16 AccessibleFeatures[];
 
@@ -39,40 +39,40 @@ class Cura_Fan : CIM_Fan {
        Units("Revolutions per Minute") ]
     uint64 MaxSpeed;
 
-     [ Description("Fan divisisor. It affects Minimum and Maximum speed value
-     and accuracy of readings. 
-     The drivers account for the 'fan divisor' in their calculation
-     of RPM. So changing the fan divisor will NOT change the
-     nominal RPM reading, it will only affect the minimum and maximum
-     readings and the accuracy of the readings.
-     The actual formula is RPM = (60 * 22500) / (count * divisor)"),
+     [ Description("Fan divisisor. It affects Minimum and Maximum speed value "
+       "and accuracy of readings. "
+       "The drivers account for the 'fan divisor' in their calculation "
+       "of RPM. So changing the fan divisor will NOT change the "
+       "nominal RPM reading, it will only affect the minimum and maximum "
+       "readings and the accuracy of the readings. "
+       "The actual formula is RPM = (60 * 22500) / (count * divisor)"),
        Write ]
     uint32 Divisor;
 
-    [ Description("Number of tachometer pulses per fan revolution.
-      Integer value, typically between 1 and 4.
-      This value is a characteristic of the fan connected to the
-      device's input, so it has to be set in accordance with the fan
-      model."),
+    [ Description("Number of tachometer pulses per fan revolution. "
+      "Integer value, typically between 1 and 4. "
+      "This value is a characteristic of the fan connected to the "
+      "device's input, so it has to be set in accordance with the fan "
+      "model."),
       Write ]
     uint32 Pulses;
 
-    [ Description("This indicates, whether a PC's speaker should beep
-    when an alarm occurs."),
+    [ Description("This indicates, whether a PC's speaker should beep "
+      "when an alarm occurs."),
       Write ]
     boolean Beep;
 
-     [ Description("ALARM warning indicating, that current speed is out of
-     range. This information is supplied by fan's chip driver.") ]
+     [ Description("ALARM warning indicating, that current speed is out of "
+       "range. This information is supplied by fan's chip driver.") ]
     boolean Alarm;
 
-     [ Description("ALARM warning indicating, that current speed is below
-       the critical level. This information is supplied by fan's chip driver.")
+     [ Description("ALARM warning indicating, that current speed is below "
+       "the critical level. This information is supplied by fan's chip driver.")
      ]
     boolean MinAlarm;
 
-     [ Description("ALARM warning indicating, that current speed is above
-       the critical level. This information is supplied by fan's chip driver.")
+     [ Description("ALARM warning indicating, that current speed is above "
+       "the critical level. This information is supplied by fan's chip driver.")
      ]
     boolean MaxAlarm;
 
@@ -85,8 +85,8 @@ class Cura_Fan : CIM_Fan {
 class Cura_FanSensor : CIM_NumericSensor {
 
      [ Key, Override("DeviceID"),
-       Description("Uniquely identifies fan. It is a composition of
-       SysPath and Name glued with slash ('/').") ]
+       Description("Uniquely identifies fan. It is a composition of "
+       "SysPath and Name glued with slash ('/').") ]
      string DeviceID;
 
      [ Override("Name"),