# # xf866config.py - XFree86 configuration file generator for 3.3.x and 4.x # # Matt Wilson # Brent Fox # Michael Fulbright # # Copyright 1999-2002 Red Hat, Inc. # # This software may be freely redistributed under the terms of the GNU # library public license. # # You should have received a copy of the GNU Library Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # import sys if __name__ == "__main__": sys.path.append ('kudzu') sys.path.append ('isys') import string import iutil import kudzu import isys import time import os from rhpl.log import log from rhpl.keyboard import Keyboard from rhpl.mouse import Mouse from rhpl.translate import _ XF86Config_template = """ # File generated by anaconda. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" %(files)s EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom EndSection # Pointer section # ********************************************************************** Section "Pointer" Protocol "%(mouseProto)s" Device "/dev/%(mouseDevice)s" # For wheel support - can not be used with Emulate3Buttons # # ZAxisMapping 4 5 # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) %(emulate3)s # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" %(autorepeat)s # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" # Let the server do the NumLock processing. This should only be # required when using pre-R6 clients # ServerNumLock # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta RightAlt Meta ScrollLock Compose RightCtl Control # To disable the XKEYBOARD extension, uncomment XkbDisable. # XkbDisable # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # XkbModel "pc102" # If you have a US Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # XkbOptions "ctrl:swapcaps" # # If you'd like to disable the capslock key, use: # XkbOptions "ctrl:nocaps" XkbRules "%(XkbRules)s" XkbModel "%(XkbModel)s" XkbLayout "%(XkbLayout)s" %(enableVariant)sXkbVariant "%(XkbVariant)s" %(enableOptions)sXkbOptions "%(XkbOptions)s" EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Generic Monitor" VendorName "Unknown" ModelName "Unknown" # HorizSync 31.5 # VertRefresh 60 HorizSync 35.15 VertRefresh 55-65 # ModeLine "640x480" 25.175 640 664 760 800 # 480 491 493 525 # 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 EndSection Section "Monitor" Identifier "%(monitorID)s" VendorName "Unknown" ModelName "Unknown" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync %(monitorHoriz)s # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh %(monitorVert)s # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # Low-res Doublescan modes # If your chipset does not support doublescan, you get a 'squashed' # resolution like 320x400. # --320x200-- # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan # 320x240 @ 72 Hz, 36.5 kHz hsync Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan # --400x300-- # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan # 400x300 @ 60 Hz, 37.8 kHz hsync Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan # 400x300 @ 72 Hz, 48.0 kHz hsync Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan # 480x300 @ 60 Hz, 37.8 kHz hsync Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 63 Hz, 39.6 kHz hsync Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 72 Hz, 48.0 kHz hsync Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan # Normal video modes # -- 512x384 # 512x384 @ 78 Hz, 31.50 kHz hsync Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync # 512x384 @ 85 Hz, 34.38 kHz hsync Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync # -- 640x400 -- # 640x400 @ 70 Hz, 31.5 kHz hsync Modeline "640x400" 25.175 640 664 760 800 400 409 411 450 # 640x400 @ 85 Hz, 37.86 kHz hsync Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync # --- 640x480 --- # 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 640x480 @ 72 Hz, 36.5 kHz hsync Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 # 640x480 @ 75 Hz, 37.50 kHz hsync ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync # 640x480 @ 85 Hz, 43.27 kHz hsync Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync # 640x480 @ 100 Hz, 53.01 kHz hsync Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync # --- 800x600 --- # 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 # 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync # 800x600 @ 72 Hz, 48.0 kHz hsync Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600 @ 85 Hz, 55.84 kHz hsync Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync # 800x600 @ 100 Hz, 64.02 kHz hsync Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync # --- 1024x768 --- # 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 70 Hz, 56.5 kHz hsync Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1024x768 @ 76 Hz, 62.5 kHz hsync Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823 # 1024x768 @ 85 Hz, 70.24 kHz hsync Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync # 1024x768 @ 100Hz, 80.21 kHz hsync Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync # --- 1152x864 --- # 1152x864 @ 60 Hz, 53.5 kHz hsync Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync # 1152x864 @ 70 Hz, 62.4 kHz hsync Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 # 1152x864 @ 78 Hz, 70.8 kHz hsync Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 # 1152x864 @ 84 Hz, 76.0 kHz hsync Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 # 1152x864 @ 100 Hz, 89.62 kHz hsync Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync # -- 1280x1024 -- # 1280x1024 @ 61 Hz, 64.2 kHz hsync Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 # 1280x1024 @ 70 Hz, 74.59 kHz hsync Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync # 1280x1024 @ 74 Hz, 78.85 kHz hsync Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 # 1280x1024 @ 76 Hz, 81.13 kHz hsync Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 # 1280x1024 @ 85 Hz, 91.15 kHz hsync Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync # 1280x1024 @ 100 Hz, 107.16 kHz hsync Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync # -- 1400x1050 -- # 1400x1050 @ 60Hz, 65.8 kHz hsync Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1400x1050 @ 70Hz, 76.8 kHz hsync Modeline "1400x1050" 151 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1400x1050 @ 75Hz, 82.3 kHz hsync Modeline "1400x1050" 162 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1400x1050 @ 85Hz, 93.2 kHz hsync Modeline "1400x1050" 184 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # -- 1600x1200 -- # 1600x1200 @ 60Hz, 75.00 kHz hsync Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync # 1600x1200 @ 70 Hz, 87.50 kHz hsync Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync # 1600x1200 @ 75 Hz, 93.75 kHz hsync Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync # 1600x1200 @ 85 Hz, 105.77 kHz hsync Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync # -- 1800x1400 -- # 1800x1440 @ 64Hz, 96.15 kHz hsync ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # 1800x1440 @ 70Hz, 104.52 kHz hsync ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # -- 1920x1200 -- # 1920x1200 @ 70Hz, 87.50 KHz hsync Modeline "1920x1200" 230 1920 1936 2096 2528 1200 1201 1204 1250 +HSync +VSync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA Card" VendorName "Unknown" BoardName "Unknown" Chipset "generic" EndSection %(acceleratedDevices)s # ********************************************************************** # Screen section # ********************************************************************** # The 16-color VGA server Section "Screen" Driver "vga16" Device "Generic VGA Card" Monitor "%(monitorID)s" Subsection "Display" Modes "640x480" "800x600" ViewPort 0 0 EndSubsection EndSection # The Mono server Section "Screen" Driver "vga2" Device "Generic VGA Card" Monitor "%(monitorID)s" Subsection "Display" Modes "640x480" "800x600" ViewPort 0 0 EndSubsection EndSection %(acceleratedScreens)s """ XF86Config_4_template = """ # File generated by anaconda. Section "ServerLayout" Identifier "Anaconda Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" %(files)s EndSection Section "Module" Load "GLcore" Load "dbe" Load "extmod"%(nonSparcMods)s%(driMod)s Load "glx" Load "record" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" %(autorepeat)s # when using XQUEUE, comment out the above line, and uncomment the # following line # Option "Protocol" "Xqueue" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:nocaps" Option "XkbRules" "%(XkbRules)s" Option "XkbModel" "%(XkbModel)s" Option "XkbLayout" "%(XkbLayout)s" %(enableVariant)sOption "XkbVariant" "%(XkbVariant)s" %(enableOptions)sOption "XkbOptions" "%(XkbOptions)s" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "%(mouseProto)s" Option "Device" "/dev/%(mouseDevice)s" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "%(emulate3)s" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync %(monitorHoriz)s VertRefresh %(monitorVert)s Option "dpms" %(displaySizeOptions)s # -- 1400x1050 -- # 1400x1050 @ 60Hz, 65.8 kHz hsync Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1400x1050 @ 70Hz, 76.8 kHz hsync Modeline "1400x1050" 151 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1400x1050 @ 75Hz, 82.3 kHz hsync Modeline "1400x1050" 162 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync # 1400x1050 @ 85Hz, 93.2 kHz hsync Modeline "1400x1050" 184 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync EndSection Section "Device" %(cardsOptions)s Identifier "%(cardID)s" Driver "%(cardDriver)s" VendorName "%(cardVendor)s" BoardName "%(cardBoardName)s" %(videoRam)s #BusID EndSection Section "Screen" Identifier "Screen0" Device "%(cardID)s" Monitor "Monitor0"%(defaultDepth)s %(screenModes)s EndSection Section "DRI" Mode 0666 EndSection """ class XF86Config: def __init__ (self, videocard, monitor, mouse, keyboard, resolution = None): if videocard: self.setVideoCard(videocard) else: raise RuntimeError, "no videocard specified in XF86Config __init__" if monitor: self.setMonitor(monitor) else: raise RuntimeError, "no monitor specified in XF86Config __init__" if mouse: self.setMouse(mouse) else: raise RuntimeError, "no mouse specified in XF86Config __init__" if keyboard: self.setKeyboard(keyboard) else: raise RuntimeError, "no keyboard specified in XF86Config __init__" self.skip = 0 self.res = resolution self.manualModes = {} self.fallbackModes = {} monsyncknown = (self.monitor.getMonitorHorizSync() != None) and (self.monitor.getMonitorVertSync() != None) if self.res: if self.res == "640x480": self.modes = { "8" : ["640x480"] } if not monsyncknown: self.monitor.setSpecs("31.5-35.5", "50-61") else: # assume they are specifying resolution for laptop/lcd # these are values for generic laptop display from monitorsdb self.modes = { "16" : [self.res] } if not monsyncknown: if self.res == "800x600": self.monitor.setSpecs("31.5-48.5", "50-70") elif self.res == "1024x768": self.monitor.setSpecs("31.5-48.5", "40-70") elif self.res == "1280x1024": self.monitor.setSpecs("31.5-67", "50-75") elif self.res == "1400x1050": self.monitor.setSpecs("31.5-90", "59-75") elif self.res == "1600x1200": self.monitor.setSpecs("31.5-90", "60") else: # just pick something reasonable for most modes self.monitor.setSpecs("31.5-65.0", "50-90") else: # fallback if nothing avail self.modes = { "16" : ["800x600"] } if not monsyncknown: self.monitor.setSpecs("31.5-48.5", "50-70") self.fallbackModes = self.modes self.device = None self.monlist = {} self.monids = {} # HACK force dpi setting self.forcedDPI = None # if skipx is TRUE user has selected to not configure X self.skipx = 0 # # we're removing frame buffer code # # if isys.fbinfo() != None: # (x, y, depth) = isys.fbinfo() # self.fbDepth = depth # else: # self.fbDepth = 16 self.files = """ # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:7100" """ def setForcedDPI(self, dpi): self.forcedDPI = dpi def getForcedDPI(self): return self.forcedDPI def getKeyboard(self): return (self.keyboard["rules"], self.keyboard["model"], self.keyboard["layout"], self.keyboard["variant"], self.keyboard["options"]) def setMouse(self, mouse): self.mouse = mouse def setKeyboard(self, keyboard): self.keyboard = keyboard def setVideoCard(self, videocard): self.videocard = videocard def setMonitor(self, monitor): self.monitor = monitor def areaCompare (self, first, second): (sx1, sy1) = string.split (first, 'x') (sx2, sy2) = string.split (second, 'x') x1 = string.atoi (sx1) y1 = string.atoi (sy1) x2 = string.atoi (sx2) y2 = string.atoi (sy2) if ((x1 * y1) > (x2 * y2)): return -1 elif ((x1 * y1) < (x2 * y2)): return 1 return 0 def availableModes (self): modes = { "8" : [ "640x480" ] } if not self.videocard: return modes vidRam = self.videocard.getVideoRam() if not vidRam: return modes if string.atoi(vidRam) >= 10240: modes["8"] = ["640x480", "800x600", "1024x768","1152x864", "1280x1024", "1400x1050", "1600x1200", "1920x1440", "2048x1536"] modes["16"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024", "1400x1050", "1600x1200", "1920x1440", "2048x1536"] modes["32"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024", "1400x1050", "1600x1200", "1920x1440", "2048x1536"] elif string.atoi(vidRam) >= 8192: modes["8"] = ["640x480", "800x600", "1024x768","1152x864", "1280x1024", "1400x1050", "1600x1200", "1920x1440", "2048x1536"] modes["16"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024", "1400x1050", "1600x1200", "1920x1440", "2048x1536"] modes["32"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024", "1400x1050", "1600x1200"] elif string.atoi(vidRam) >= 6144: modes["8"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024", "1400x1050", "1600x1200"] modes["16"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024", "1400x1050", "1600x1200"] modes["32"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024"] elif string.atoi(vidRam) >= 4096: modes["8"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024"] modes["16"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024"] modes["32"] = ["640x480", "800x600", "1024x768", "1152x864"] elif string.atoi(vidRam) >= 2048: modes["8"] = ["640x480", "800x600", "1024x768", "1152x864", "1280x1024"] modes["16"] = ["640x480", "800x600", "1024x768", "1152x864"] modes["32"] = ["640x480", "800x600"] elif string.atoi(vidRam) >= 1024: modes["8"] = ["640x480", "800x600", "1024x768", "1152x864"] modes["16"] = ["640x480", "800x600"] modes["32"] = [] elif string.atoi(vidRam) >= 512: modes["8"] = ["640x480", "800x600"] modes["16"] = ["640x480"] modes["32"] = [] elif string.atoi(vidRam) >= 256: modes["8"] = ["640x480"] return modes def filterModesByMemory (self): self.modes = self.availableModes() def setModes(self, modes): self.modes = modes def getModes(self): return self.modes def setManualModes(self, modes): self.manualModes = modes def getManualModes(self): return self.manualModes def setFallBackModes(self, modes): self.fallbackModes = modes def getFallBackModes(self): return self.fallbackModes # # XXX I think this is all no longer used # # def cards (self, thecard = None): # cards = {} # # all the straight servers # for server in [ "3DLabs", "8514", "FBDev", "Mach8", "Mach32", "Mach64", # "Mono", "P9000", "S3", "S3V", "SVGA", "W32", "VGA16" ]: # cards["Generic " + server] = { "SERVER" : server, # "NAME" : "Generic " + server } # db = open ('/usr/X11R6/lib/X11/Cards') # lines = db.readlines () # db.close () # card = {} # name = None # for line in lines: # line = string.strip (line) # if not line and name: # cards[name] = card # card = {} # name = None # continue # if line and line[0] == '#': # continue # if len (line) > 4 and line[0:4] == 'NAME': # name = line[5:] # info = string.splitfields (line, ' ') # if card.has_key (info[0]): # card[info[0]] = card[info[0]] + '\n' + (string.joinfields (info[1:], ' ')) # else: # card[info[0]] = string.joinfields (info[1:], ' ') # if thecard: # card = cards[thecard] # # XXX set a max depth here to avoid infinite loops # while card.has_key ("SEE"): # card = cards[card["SEE"]] # return card # return cards # def monitors (self, lines = None): # if self.monlist: # return self.monlist # if not lines: # db = open ('/usr/share/hwdata/MonitorsDB') # lines = db.readlines () # db.close () # for line in lines: # line = string.strip (line) # if not line: # continue # if line and line[0] == '#': # continue # fields = string.split (line, ';') # man = string.strip(fields[0]) # model = string.strip(fields[1]) # eisa = string.lower(string.strip(fields[2])) # horiz = string.strip(fields[3]) # vert = string.strip(fields[4]) # if self.monlist.has_key(man): # self.monlist[man].append((model, eisa, vert, horiz)) # else: # self.monlist[man] = [(model, eisa, vert, horiz)] # self.monids[eisa] = (man, model, eisa, vert, horiz) # return self.monlist # end of potentially unused code def write (self, path): config = open (path + "/XF86Config", 'w') config.write (self.Version3Config ()) config.close () try: config4 = self.Version4Config (self.videocard) except RuntimeError: return config = open (path + "/XF86Config-4", 'w') config.write (config4) config.close () def writeKS (self, f, desktop=None): if self.skipx: f.write("skipx\n") return xmodes = self.getManualModes() if len(xmodes) == 0: f.write("skipx\n") return f.write("xconfig") args = self.getArgList(xmodes) if desktop: rl = desktop.getDefaultRunLevel() if rl and str(rl) == '5': args = args + ['--startxonboot', ''] gui = desktop.getDefaultDesktop() if gui: args = args + ['--defaultdesktop', string.lower(gui)] for arg in args: f.write(" " + arg) f.write("\n") def getArgList(self, xmodes): args = [] vc = self.videocard args = args + [ "--card", '"' + vc.shortDescription() + '"' ] args = args + [ "--videoram", vc.getVideoRam() ] args = args + [ "--hsync", self.monitor.getMonitorHorizSync() ] args = args + [ "--vsync", self.monitor.getMonitorVertSync() ] # XXX this isn't really quite right, but it works for the way # things are now depths = xmodes.keys() args = args + [ "--resolution", xmodes[depths[0]][0] ] args = args + [ "--depth", depths[0] ] return args def test (self, serverflags=None, spawn=0, root='/'): if self.videocard == None: return None servername = self.videocard.getXServer() if not servername: return None files = self.files # # we're removing frame buffer code # # if we're forcing framebuffer, use those modes if available # fbmonsect = None # if self.videocard.isFrameBuffer(): # if self.monitor: # fbmonsect = self.monitor.getFBMonitorSection() # if fbmonsect: # self.manualModes = self.monitor.getFBMonitorMode() # elif self.videocard.hasFixedMode(): # self.manualModes = self.videocard.FixedMode() # else: # raise RuntimeError, "trying frame buffer but no valid modes to try..." # elif self.videocard.hasFixedMode(): # self.manualModes = self.videocard.FixedMode() # needed for VGA16 to work? if self.videocard.hasFixedMode(): self.manualModes = self.videocard.FixedMode() # save current manually selected mode, override if non-existant manmodes = self.manualModes if not manmodes: if self.fallbackModes: self.manualModes = self.fallbackModes else: self.manualModes = self.modes self.files = """ RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/korean:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic:unscaled" FontPath "/usr/share/fonts/ISO8859-2/misc:unscaled" FontPath "/usr/share/fonts/ISO8859-2/75dpi:unscaled" FontPath "/usr/share/fonts/ISO8859-2/100dpi:unscaled" FontPath "/usr/share/fonts/ISO8859-9/misc:unscaled" FontPath "/usr/share/fonts/ISO8859-9/75dpi:unscaled" FontPath "/usr/share/fonts/ISO8859-9/100dpi:unscaled" FontPath "/usr/share/fonts/KOI8-R/misc:unscaled" FontPath "/usr/share/fonts/KOI8-R/75dpi:unscaled" """ f = open ('%s/tmp/XF86Config.test' %(root), 'w') if servername == "XFree86": f.write(self.Version4Config(self.videocard, 1)) else: f.write(self.Version3Config(1)) f.close () self.files = files # restore manualmodes self.manualModes = manmodes serverPath = "/usr/X11R6/bin/" + servername serverpid = os.fork() if (not serverpid): if (root and root != '/'): os.chroot (root) os.chdir("/") args = [serverPath, '-xf86config', '/tmp/XF86Config.test' ] logFile = "/tmp/X.log" if servername == "XFree86": args = args + [ "-logfile", "/dev/null" ] if serverflags: args = args + serverflags else: args = args + [ ":9", "vt6" ] logFile = "/tmp/X-Test.log" try: err = os.open(logFile, os.O_RDWR | os.O_CREAT) if err < 0: sys.stderr.write("error opening /tmp/X.log\n") else: os.dup2(err, 2) os.close(err) except: # oh well pass os.execv(args[0], args) sys.exit (1) if spawn: return serverpid child = os.fork() if (not child): if (root and root != '/'): os.chroot (root) os.chdir("/") os.environ["DISPLAY"] = ":9" os.execv("/usr/X11R6/bin/Xtest", ["Xtest", "--nostart", "--norunlevel"]) else: failed = 0 status = -1 try: pid, status = os.waitpid(child, 0) os.kill (serverpid, 15) os.waitpid(serverpid, 0) if not os.WIFEXITED (status) or os.WEXITSTATUS (status): if os.WEXITSTATUS (status) not in [ 0, 1, 2 ]: failed = 1 except OSError: failed = 1 if failed: raise RuntimeError, "X startup failed %d" % (status,) return def Version3Config (self, test=0): info = {} devices = "" screens = "" monitor = self.monitor card = self.videocard carddata = card.getCardData() devices = devices + """ Section "Device" Identifier "%(NAME)s" """ % carddata if carddata.has_key ("VENDOR"): devices = devices + ' VendorName "%(VENDOR)s"\n' % carddata if carddata.has_key ("BOARDNAME"): devices = devices + ' BoardName "%(BOARD)s"\n' % carddata if carddata.has_key ("RAMDAC"): devices = devices + ' Ramdac "%(RAMDAC)s"\n' % carddata if carddata.has_key ("LINE"): devices = devices + carddata["LINE"] + "\n" if card.getVideoRam(): devices = devices + ' VideoRam %s\n' % (card.getVideoRam(),) devices = devices + "EndSection\n" if card.getDevID(): screens = "" tmp = {} maxdepth = -1 xmodes = self.manualModes for (depth, modes) in xmodes.items (): modes.sort (self.areaCompare) if len(modes) > 0 and string.atoi(depth) > maxdepth: maxdepth = string.atoi(depth) # if monitor.getFBMonitorSection(): # monitorname = "Probed Monitor" monitorname = monitor.getMonitorID() for driver in [ "svga", "accel" ]: tmp["driver"] = driver tmp["devID"] = card.getDevID() tmp["monitorID"] = monitorname screens = screens + """ # The %(driver)s server Section "Screen" Driver "%(driver)s" Device "%(devID)s" Monitor "%(monitorID)s" """ % tmp # see if 16 bpp is available, and if it should be the # default depth if self.res == "640x480": screens = screens + " DefaultColorDepth 8\n" elif maxdepth > 0: if maxdepth > 16 and '16' in xmodes.keys() and xmodes['16']: screens = screens + " DefaultColorDepth 16\n" else: screens = screens + " DefaultColorDepth %d\n" % maxdepth for depth in xmodes.keys (): if not xmodes[depth]: continue screens = screens + """ Subsection "Display" Depth %s Modes """ % depth for res in xmodes[depth]: screens = screens + '"' + res + '" ' screens = screens + """ ViewPort 0 0 EndSubsection """ screens = screens + "EndSection\n" # XXX if we're going to be using IMPS/2 on # reboot, but we're using PS/2 now, we'll need # to temporarily use PS/2 so we don't frob the # intellimouse into IMPS/2 mode (if we did, we'll # loose the mouse cursor in the install) if test and self.mouse.info["XMOUSETYPE"] == "IMPS/2": mouseProto = "PS/2" else: mouseProto = self.mouse.info['XMOUSETYPE'] # # we're removing frame buffer code # # fbprobemon = monitor.getFBMonitorSection() # if fbprobemon != "": # fbmonid = "Probed Monitor" # else: # fbmonid = monitor.getMonitorID() info = { "acceleratedDevices" : devices, "acceleratedScreens" : screens, "devID" : card.getDevID(), "mouseProto" : mouseProto, "mouseDevice" : self.mouse.device, "XkbRules" : self.keyboard["rules"], "XkbModel" : self.keyboard["model"], "XkbLayout" : self.keyboard["layout"], "XkbVariant" : self.keyboard["variant"], "enableVariant" : "#", "XkbOptions" : self.keyboard["options"], "enableOptions" : "#", "monitorID" : monitor.getMonitorID(), "monitorHoriz" : monitor.getMonitorHorizSync(), "monitorVert" : monitor.getMonitorVertSync(), # "fbProbedMonitor" : fbprobemon, # "fbmonitorID" : fbmonid, "files" : self.files, } # HACK if no frame buffer running just wing it # # we're removing frame buffer code # # if card.getFBBpp(): # info["fbDepth"] = card.getFBBpp() # else: # info["fbDepth"] = 8 # # info["fbDepth"] = self.fbDepth if self.keyboard["variant"]: info["enableVariant"] = "" if self.keyboard["options"]: info["enableOptions"] = "" if self.mouse.get()[1]: info["emulate3"] = " Emulate3Buttons\n Emulate3Timeout 50" else: info["emulate3"] = "# Emulate3Buttons\n Emulate3Timeout 50" if iutil.getArch() == "sparc": info["autorepeat"] = "# AutoRepeat 200 20" else: info["autorepeat"] = " AutoRepeat 500 5" return XF86Config_template % info def Version4Config(self, card, test=0): if not card: raise RuntimeError, "No known video cards" screens = "" maxdepth = -1 xmodes = self.manualModes for depth in xmodes.keys (): if not xmodes[depth]: continue if depth == "32": depth = "24" xmodes["24"] = xmodes["32"] if maxdepth < string.atoi(depth): maxdepth = string.atoi(depth) screens = screens + """ Subsection "Display" Depth %s Modes """ % depth # put in all modes up to selected mode availmodes = self.availableModes() if depth in availmodes.keys(): tmpmodes = availmodes[depth] tmpmodes.reverse() else: tmpmodes = [] for d in xmodes.keys(): for r in xmodes[d]: tmpmodes.append(r) modes = xmodes[depth] modes.sort (self.areaCompare) for res in tmpmodes: if self.areaCompare(res, modes[0]) > -1: screens = screens + '"' + res + '" ' screens = screens + """ EndSubsection """ if depth == "24": del xmodes["24"] # XXX if we're going to be using IMPS/2 on # reboot, but we're using PS/2 now, we'll need # to temporarily use PS/2 so we don't frob the # intellimouse into IMPS/2 mode (if we did, we'll # loose the mouse cursor in the install) if test and self.mouse.info["XMOUSETYPE"] == "IMPS/2": mouseProto = "PS/2" else: mouseProto = self.mouse.info['XMOUSETYPE'] if mouseProto == 'sun': mouseProto = 'BusMouse' if self.mouse.get()[1]: emulate3 = "yes" else: emulate3 = "no" carddata = card.getCardData() monitor = self.monitor # set cardsoptions if unambiguous what version of XFree86 they # apply to cardoptions = " # no known options" if carddata.has_key("DRIVER") and not carddata.has_key("SERVER"): if carddata.has_key("LINE"): cardoptions = carddata["LINE"] # calculate display size so we force dpi in install mode # only works when starting X server in real install environment displaySizeOpts = "" fdpi = self.getForcedDPI() if fdpi and self.res and (carddata.has_key("DRIVER") and carddata["DRIVER"] != "vesa"): try: idx = string.find(self.res, 'x') if idx >= 0: reswidth = string.atoi(self.res[:idx]) resheight = string.atoi(self.res[idx+1:]) widthmm = 25.4*reswidth/fdpi heightmm = 25.4*resheight/fdpi log("forcing dpi = %s for mode %sx%s, heightxwidth = %smm by %smm" % (fdpi, reswidth, resheight, widthmm, heightmm)) displaySizeOpts = "DisplaySize %s %s" % (widthmm, heightmm) except: log("failed to force dpi to requested %s" % (fdpi,)) data = { "mouseProto" : mouseProto, "mouseDevice" : self.mouse.device, "cardsOptions" : cardoptions, "cardID" : carddata["NAME"], "cardVendor" : carddata["NAME"], "cardBoardName": carddata["NAME"], "monitorHoriz" : monitor.getMonitorHorizSync(), "monitorVert" : monitor.getMonitorVertSync(), "files" : self.files, "screenModes" : screens, "nonSparcMods" : '\n\tLoad "fbdevhw"', "driMod" : '\n\tLoad "dri"', "XkbRules" : self.keyboard["rules"], "XkbModel" : self.keyboard["model"], "XkbLayout" : self.keyboard["layout"], "XkbVariant" : self.keyboard["variant"], "enableVariant": "#", "XkbOptions" : self.keyboard["options"], "enableOptions": "#", "defaultDepth" : "", "emulate3" : emulate3, "videoRam" : "", "displaySizeOptions" : displaySizeOpts } # self.vidCards[self.primary]["DRIVER"] = "vga" # see if 16 bpp is available, and if it should be the # default depth if self.keyboard["variant"]: data["enableVariant"] = "" if self.keyboard["options"]: data["enableOptions"] = "" if maxdepth > 0: if maxdepth > 16 and '16' in xmodes.keys() and xmodes['16']: data["defaultDepth"] = "\n\tDefaultDepth\t16" else: data["defaultDepth"] = "\n\tDefaultDepth\t%d" % maxdepth if iutil.getArch() == "sparc": data["nonSparcMods"] = "" data["autorepeat"] = '# Option "AutoRepeat" "200 20"' else: data["autorepeat"] = '# Option "AutoRepeat" "500 5"' if carddata.has_key ("DRIVER"): data["cardDriver"] = carddata["DRIVER"] if data["cardDriver"] == "i810": data["videoRam"] = "\tVideoRam %s\n" % card.getVideoRam() # DRI HACK! #if data["cardDriver"] == "r128" or data["cardDriver"] == "mga": # data["driMod"] = '\n\t#Load "dri"' else: raise RuntimeError, "Don't know which XFree86-4.0 video driver to use!" return XF86Config_4_template % data if __name__ == "__main__": sys.path.append ("kudzu") x = XF86Config () print x.cards ("ATI Mach64 3D RAGE II") x.probe () # print x.Version3Config() print x.Version4Config() sys.exit (0) x.filterModesByMemory () # print self.modes # time.sleep (5) print x.preludeSection () print x.keyboardSection () print x.mouseSection () print x.monitorSection () print x.deviceSection () # x.modes["8"] = [ "640x480" ] # x.modes["16"] = [ "640x480" ] # x.modes["32"] = [ "640x480" ] print x.screenSection ()