# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # Arjan van de Ven , 2001. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2001-04-02 11:26-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Arjan van de Ven \n" "Language-Team: Dutch \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: ENCODING\n" #: ../comps.py:490 msgid "Everything" msgstr "Alles" #: ../exception.py:13 ../text.py:860 msgid "Exception Occurred" msgstr "" #: ../exception.py:91 msgid "Dump Written" msgstr "" #: ../exception.py:92 msgid "" "Your system's state has been successfully written to the floppy. Your system " "will now be reset." msgstr "" #: ../fstab.py:67 msgid "" "The following partitions are newly created, but you have chosen not to " "format them. This will probably cause an error later in the install.\n" "\n" msgstr "" "De volgende partities zijn aangemaakt, maar U heeft er voor gekozenom deze " "niet te formatteren. Dit zal een fout verder in de installatie veroorzaken.\n" "\n" #: ../fstab.py:75 msgid "" "\n" "\n" "Press OK to continue, or Cancel to go back and select these partitions to be " "formatted (RECOMMENDED)." msgstr "" "\n" "\n" "Kies OK om de installatie voort te zetten, Cancel om terug te gaan en de " "paritities aan te merken voor formatteren. (AANBEVOLEN)." #: ../fstab.py:76 ../harddrive.py:235 ../iw/rootpartition_gui.py:81 #: ../iw/rootpartition_gui.py:97 ../iw/upgrade_swap_gui.py:175 #: ../iw/upgrade_swap_gui.py:184 ../iw/upgrade_swap_gui.py:191 #: ../textw/upgrade_text.py:117 msgid "Warning" msgstr "Waarschuwing" #: ../fstab.py:320 ../fstab.py:535 ../fstab.py:635 ../fstab.py:786 #: ../fstab.py:853 ../harddrive.py:173 ../image.py:64 ../image.py:141 #: ../libfdisk/newtfsedit.c:1743 ../loader/devices.c:259 #: ../loader/devices.c:266 ../loader/devices.c:435 ../loader/devices.c:480 #: ../loader/devices.c:500 ../loader/lang.c:99 ../loader/loader.c:520 #: ../loader/loader.c:530 ../loader/loader.c:584 ../loader/loader.c:969 #: ../loader/loader.c:1024 ../loader/loader.c:1194 ../loader/loader.c:1199 #: ../loader/loader.c:1281 ../loader/loader.c:2135 ../loader/loader.c:2165 #: ../loader/loader.c:2243 ../loader/loader.c:2455 ../loader/pcmcia.c:114 #: ../loader/pcmcia.c:131 ../loader/urls.c:78 ../loader/urls.c:87 #: ../loader/urls.c:94 ../loader/urls.c:233 ../loader/urls.c:238 #: ../textw/bootdisk_text.py:69 ../textw/upgrade_text.py:107 #: ../textw/upgrade_text.py:113 ../textw/upgrade_text.py:152 ../todo.py:1239 #: ../todo.py:1252 ../todo.py:1572 ../upgrade.py:24 ../upgrade.py:52 msgid "Error" msgstr "Fout" #: ../fstab.py:321 msgid "" "The kernel is unable to read your new partitioning information, probably " "because you modified extended partitions. While this is not critical, you " "must reboot your machine before proceeding. Insert the Red Hat boot disk now " "and press \"Ok\" to reboot your system.\n" msgstr "" "De linux kernel was niet in staat om de nieuwe partitie-informatiete lezen, " "U heeft waarschijnlijk zgn 'extended partities' gewijzigd. Dit is geen " "kritieke fout, maar U moet uw systeem herstarten voordat U verder kunt gaan. " "Doe de Red Hat boot disk in de driver en kies \"OK\" om Uw systeem te " "herstarten.\n" #: ../fstab.py:506 #, fuzzy msgid "Swap Space" msgstr "Schijfruimte" #: ../fstab.py:507 #, fuzzy msgid "Creating swap space..." msgstr "Formateren van de swappartitie /dev/%s..." #: ../fstab.py:525 ../fstab.py:795 ../fstab.py:1254 msgid "Formatting" msgstr "" #: ../fstab.py:526 #, fuzzy msgid "Formatting swap space..." msgstr "Formateren van de swappartitie /dev/%s..." #: ../fstab.py:535 msgid "Error creating swap on device " msgstr "Fout tijdens het aanmaken van de swappartitie" #: ../fstab.py:636 #, c-format msgid "Error unmounting %s: %s" msgstr "Fout tijdens het unmounten van %s: %s" #: ../fstab.py:689 ../todo.py:740 msgid "Creating" msgstr "Aanmaken" #: ../fstab.py:689 msgid "Creating RAID devices..." msgstr "Aanmaken van RAID partities.." #: ../fstab.py:730 msgid "Loopback" msgstr "" #: ../fstab.py:731 #, c-format msgid "Creating loopback filesystem on device /dev/%s..." msgstr "Aanmaken van het loopback bestandssysteem op apparaat /dev/%s..." #: ../fstab.py:787 #, c-format msgid "" "An error occured trying to format %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press Enter to reboot your system." msgstr "" #: ../fstab.py:796 ../fstab.py:1255 #, c-format msgid "Formatting %s filesystem..." msgstr "Formateren van het %s bestandssysteem..." #: ../fstab.py:854 #, c-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "This most likely means this partition has not been formatted.\n" "\n" "Press OK to reboot your system." msgstr "" "Er is een foutsituatie opgretreden bij het mounten van device %s als %s : %s " "\n" "\n" "Dit is waarschijnlijk veroorzaakt doordat deze partitie niet geformateerd " "is.\n" "\n" "Kies OK om uw systeem te herstarten." #: ../gui.py:183 msgid "" "An exceptional condition has occured. This is most likely a bug. Please " "copy the full text of this exception and file a bug report at " "http://bugzilla.redhat.com/bugzilla" msgstr "" "Er is iets vreemds gebeurt. Dit is waarschijnlijk een fout. Wij verzoeken U " "om de volledige 'exception' tekst te kopieren een de fout te rapporteren op " "http://bugzilla.redhat.com/bugzilla" #: ../gui.py:332 ../text.py:878 msgid "" "Please insert a floppy now. All contents of the disk will be erased, so " "please choose your diskette carefully." msgstr "" #: ../gui.py:424 ../gui.py:799 msgid "Next" msgstr "Volgende" #: ../gui.py:425 ../gui.py:798 ../libfdisk/newtfsedit.c:1477 #: ../libfdisk/newtfsedit.c:1485 ../loader/cdrom.c:34 ../loader/devices.c:93 #: ../loader/devices.c:238 ../loader/devices.c:335 ../loader/lang.c:585 #: ../loader/loader.c:291 ../loader/loader.c:873 ../loader/loader.c:910 #: ../loader/loader.c:1024 ../loader/loader.c:1116 ../loader/loader.c:1519 #: ../loader/net.c:185 ../loader/net.c:272 ../loader/net.c:357 #: ../loader/urls.c:155 ../loader/urls.c:375 ../rescue.py:132 ../text.py:61 #: ../text.py:75 ../text.py:135 ../text.py:199 ../text.py:206 ../text.py:228 #: ../text.py:231 ../text.py:311 ../text.py:356 ../text.py:359 ../text.py:416 #: ../text.py:419 ../text.py:445 ../text.py:449 ../text.py:458 ../text.py:531 #: ../text.py:533 ../text.py:543 ../text.py:545 ../textw/bootdisk_text.py:30 #: ../textw/firewall_text.py:9 ../textw/lilo_text.py:34 #: ../textw/lilo_text.py:108 ../textw/lilo_text.py:116 #: ../textw/lilo_text.py:224 ../textw/mouse_text.py:27 #: ../textw/mouse_text.py:28 ../textw/mouse_text.py:55 #: ../textw/mouse_text.py:81 ../textw/network_text.py:102 #: ../textw/network_text.py:161 ../textw/network_text.py:164 #: ../textw/packages_text.py:55 ../textw/packages_text.py:236 #: ../textw/packages_text.py:347 ../textw/packages_text.py:353 #: ../textw/partitioning_text.py:24 ../textw/partitioning_text.py:66 #: ../textw/partitioning_text.py:157 ../textw/partitioning_text.py:221 #: ../textw/partitioning_text.py:260 ../textw/partitioning_text.py:343 #: ../textw/silo_text.py:26 ../textw/silo_text.py:99 ../textw/silo_text.py:206 #: ../textw/timezone_text.py:69 ../textw/upgrade_text.py:68 #: ../textw/upgrade_text.py:155 ../textw/upgrade_text.py:173 #: ../textw/upgrade_text.py:176 ../textw/upgrade_text.py:190 #: ../textw/upgrade_text.py:191 ../textw/upgrade_text.py:206 #: ../textw/upgrade_text.py:209 ../textw/userauth_text.py:30 #: ../textw/userauth_text.py:165 ../textw/userauth_text.py:199 #: ../textw/userauth_text.py:297 msgid "Back" msgstr "Terug" #: ../gui.py:426 ../gui.py:546 ../gui.py:801 msgid "Release Notes" msgstr "" #: ../gui.py:427 ../gui.py:804 msgid "Show Help" msgstr "Hulptekst weergeven" #: ../gui.py:428 ../gui.py:803 msgid "Hide Help" msgstr "Hulptekst verbergen" #: ../gui.py:429 ../gui.py:802 msgid "Finish" msgstr "Beeindigen" #: ../gui.py:433 ../gui.py:834 msgid "Online Help" msgstr "Online helptekst" #: ../gui.py:434 ../iw/language_gui.py:10 ../iw/language_support_gui.py:25 #: ../text.py:69 ../text.py:973 msgid "Language Selection" msgstr "Taalkeuze" #: ../gui.py:541 ../iw/firewall_gui.py:123 ../libfdisk/gnomefsedit.c:1394 #: ../libfdisk/gnomefsedit.c:1411 msgid "Close" msgstr "Sluiten" #: ../gui.py:577 msgid "Unable to load file!" msgstr "" #: ../gui.py:722 msgid "Red Hat Linux Installer" msgstr "Red Hat Linux Installatieprogramma" #: ../gui.py:726 msgid "Red Hat Linux Install Shell" msgstr "Red Hat Linux Installatie shell" #: ../gui.py:737 #, c-format msgid "Red Hat Linux Installer on %s" msgstr "Red Hat Linux Installer op %s" #: ../gui.py:738 #, fuzzy, c-format msgid "Red Hat Linux Install Shell on %s" msgstr "Red Hat Linux Installatie Shell op %s" #: ../gui.py:883 msgid "Install Window" msgstr "Installatie Venster" #: ../harddrive.py:174 #, c-format msgid "Missing CD #%d, which is required for the install." msgstr "CD #%d ontbreekt. Deze CD is nodig voor de installatie" #: ../image.py:61 msgid "Copying File" msgstr "Kopieren van bestand" #: ../image.py:62 msgid "Transferring install image to hard drive..." msgstr "Overzetten van de installatie-bestanden naar de harddisk" #: ../image.py:65 msgid "" "An error occured transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" "Er is een fout opgetreden tijdens het overzetten van de " "installatie-bestanden.Waarschijnlijk is uw harddisk vol." #: ../image.py:118 msgid "Change CDROM" msgstr "Wissel de CDROM" #: ../image.py:119 #, c-format msgid "Please insert disc %d to continue." msgstr "" #: ../image.py:136 msgid "Wrong CDROM" msgstr "Verkeerde CDROM" #: ../image.py:137 msgid "That's not the correct Red Hat CDROM." msgstr "Dat is niet de juiste Red Hat Linux CDROM" #: ../image.py:142 msgid "The CDROM could not be mounted." msgstr "De CDROM kon niet gemount worden." #: ../loader/cdrom.c:34 ../loader/devices.c:92 ../loader/devices.c:237 #: ../loader/devices.c:259 ../loader/devices.c:266 ../loader/devices.c:335 #: ../loader/devices.c:435 ../loader/devices.c:480 ../loader/devices.c:500 #: ../loader/devices.c:532 ../loader/kickstart.c:58 ../loader/kickstart.c:68 #: ../loader/kickstart.c:107 ../loader/lang.c:99 ../loader/lang.c:294 #: ../loader/lang.c:585 ../loader/loader.c:291 ../loader/loader.c:520 #: ../loader/loader.c:530 ../loader/loader.c:584 ../loader/loader.c:910 #: ../loader/loader.c:969 ../loader/loader.c:1024 ../loader/loader.c:1116 #: ../loader/loader.c:1194 ../loader/loader.c:1199 ../loader/loader.c:1241 #: ../loader/loader.c:1250 ../loader/loader.c:1281 ../loader/loader.c:1519 #: ../loader/loader.c:2135 ../loader/loader.c:2165 ../loader/loader.c:2228 #: ../loader/loader.c:2243 ../loader/loader.c:2455 ../loader/net.c:185 #: ../loader/net.c:272 ../loader/net.c:357 ../loader/net.c:687 #: ../loader/net.c:720 ../loader/pcmcia.c:104 ../loader/pcmcia.c:114 #: ../loader/pcmcia.c:131 ../loader/urls.c:155 ../loader/urls.c:233 #: ../loader/urls.c:238 ../loader/urls.c:375 ../rescue.py:20 ../rescue.py:92 #: ../rescue.py:110 ../rescue.py:126 ../text.py:135 ../text.py:174 #: ../text.py:228 ../text.py:311 ../text.py:356 ../text.py:374 ../text.py:416 #: ../text.py:445 ../text.py:531 ../text.py:543 ../text.py:573 ../text.py:594 #: ../text.py:764 ../text.py:820 ../text.py:846 ../text.py:872 ../text.py:880 #: ../text.py:895 ../text.py:1138 ../textw/bootdisk_text.py:52 #: ../textw/bootdisk_text.py:54 ../textw/firewall_text.py:9 #: ../textw/firewall_text.py:126 ../textw/firewall_text.py:128 #: ../textw/firewall_text.py:191 ../textw/lilo_text.py:33 #: ../textw/lilo_text.py:108 ../textw/lilo_text.py:167 #: ../textw/lilo_text.py:173 ../textw/mouse_text.py:55 #: ../textw/network_text.py:102 ../textw/network_text.py:123 #: ../textw/network_text.py:161 ../textw/packages_text.py:55 #: ../textw/packages_text.py:89 ../textw/packages_text.py:236 #: ../textw/packages_text.py:347 ../textw/partitioning_text.py:260 #: ../textw/partitioning_text.py:343 ../textw/partitioning_text.py:354 #: ../textw/partitioning_text.py:362 ../textw/partitioning_text.py:369 #: ../textw/silo_text.py:25 ../textw/silo_text.py:99 #: ../textw/timezone_text.py:69 ../textw/upgrade_text.py:67 #: ../textw/upgrade_text.py:173 ../textw/userauth_text.py:30 #: ../textw/userauth_text.py:44 ../textw/userauth_text.py:49 #: ../textw/userauth_text.py:84 ../textw/userauth_text.py:99 #: ../textw/userauth_text.py:105 ../textw/userauth_text.py:111 #: ../textw/userauth_text.py:119 ../textw/userauth_text.py:128 #: ../textw/userauth_text.py:135 ../textw/userauth_text.py:199 #: ../textw/userauth_text.py:297 ../xserver.py:34 msgid "OK" msgstr "OK" #: ../rescue.py:39 msgid "WARNING: no valid block devices were found.\n" msgstr "WAARSCHUWING: er zijn geen bruikbare (hard)disks gevonden.\n" #: ../rescue.py:41 msgid "ERROR: unknown error encountered reading partition tables.\n" msgstr "" "FOUT: er is een onbekende fout opgetreden bij het lezen van de partitie " "tabel.\n" #: ../rescue.py:89 msgid "System to Rescue" msgstr "Systeem om the herstellen" #: ../rescue.py:90 ../textw/upgrade_text.py:171 msgid "What partition holds the root partition of your installation?" msgstr "Welke partitie bevat de bron partitie van Uw installatie?" #: ../iw/congrats_gui.py:13 ../iw/congrats_gui.py:62 ../rescue.py:92 #: ../rescue.py:96 ../textw/upgrade_text.py:22 ../textw/upgrade_text.py:141 msgid "Exit" msgstr "Einde" #: ../rescue.py:106 ../rescue.py:121 msgid "Rescue" msgstr "" #: ../rescue.py:107 msgid "" "Your system has been mounted under /mnt/sysimage.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" "Uw systeem is gemount als /mnt/sysimage.\n" "\n" "Typ om een shellprompt te krijgen. Het systeem zal automatisch " "herstarten als u de shell verlaat." #: ../rescue.py:122 msgid "" "An error occured trying to mount some or all of your system. Some of it may " "be mounted under /mnt/sysimage.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" "Een fout is opgetreden tijdens het mounten van (een deel van) uw systeem.Een " "deel kan gemount zijn als /mnt/sysimage.\n" "\n" "Typ om een shellprompt te krijgen. Het systeem zal automatisch " "herstarten als U de shell verlaat." #: ../rescue.py:128 msgid "Rescue Mode" msgstr "Herstel Mode" #: ../rescue.py:129 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" "U heeft geen Linux partities. Typ om een shellprompt te krijgen.Het " "systeem zal automatisch herstarten als u de shell verlaat." #: ../rescue.py:141 msgid "Your system is mounted under the /mnt/sysimage directory." msgstr "Uw systeem is gemount als de /mnt/sysimage directory" #. code to create dialog in gtk+ #: ../iw/package_gui.py:490 ../libfdisk/fsedit.c:922 ../libfdisk/fsedit.c:929 #: ../libfdisk/fsedit.c:936 ../libfdisk/fsedit.c:945 ../libfdisk/fsedit.c:972 #: ../libfdisk/fsedit.c:985 ../libfdisk/fsedit.c:995 ../libfdisk/fsedit.c:1024 #: ../libfdisk/fsedit.c:1034 ../libfdisk/fsedit.c:1051 #: ../libfdisk/fsedit.c:1475 ../libfdisk/gnomefsedit.c:762 #: ../libfdisk/gnomefsedit.c:794 ../libfdisk/gnomefsedit.c:885 #: ../libfdisk/gnomefsedit.c:920 ../libfdisk/gnomefsedit.c:1268 #: ../libfdisk/gnomefsedit.c:1305 ../libfdisk/gnomefsedit.c:1339 #: ../libfdisk/gnomefsedit.c:1358 ../libfdisk/gnomefsedit.c:1532 #: ../libfdisk/gnomefsedit.c:1607 ../libfdisk/gnomefsedit.c:1657 #: ../libfdisk/gnomefsedit.c:1725 ../libfdisk/gnomefsedit.c:1743 #: ../libfdisk/gnomefsedit.c:2024 ../libfdisk/gnomefsedit.c:2033 #: ../libfdisk/gnomefsedit.c:2279 ../libfdisk/gnomefsedit.c:2287 #: ../libfdisk/gnomefsedit.c:2331 ../libfdisk/gnomefsedit.c:2341 #: ../libfdisk/gnomefsedit.c:2348 ../libfdisk/gnomefsedit.c:2363 #: ../libfdisk/gnomefsedit.c:2373 ../libfdisk/gnomefsedit.c:2383 #: ../libfdisk/gnomefsedit.c:2422 ../libfdisk/gnomefsedit.c:2589 #: ../libfdisk/gnomefsedit.c:2631 ../libfdisk/newtfsedit.c:170 #: ../libfdisk/newtfsedit.c:347 ../libfdisk/newtfsedit.c:577 #: ../libfdisk/newtfsedit.c:639 ../libfdisk/newtfsedit.c:672 #: ../libfdisk/newtfsedit.c:698 ../libfdisk/newtfsedit.c:717 #: ../libfdisk/newtfsedit.c:848 ../libfdisk/newtfsedit.c:1477 #: ../libfdisk/newtfsedit.c:1485 ../libfdisk/newtfsedit.c:1610 #: ../libfdisk/newtfsedit.c:1631 ../libfdisk/newtfsedit.c:1659 #: ../libfdisk/newtfsedit.c:1743 ../loader/urls.c:78 ../loader/urls.c:87 #: ../loader/urls.c:94 ../loader/urls.c:244 ../text.py:61 ../text.py:63 #: ../text.py:199 ../text.py:458 ../textw/lilo_text.py:138 #: ../textw/lilo_text.py:223 ../textw/mouse_text.py:27 #: ../textw/partitioning_text.py:157 ../textw/partitioning_text.py:422 #: ../textw/silo_text.py:136 ../textw/silo_text.py:149 #: ../textw/silo_text.py:205 ../textw/upgrade_text.py:22 #: ../textw/upgrade_text.py:141 ../textw/upgrade_text.py:190 msgid "Ok" msgstr "Ok" #: ../text.py:70 msgid "What language would you like to use during the installation process?" msgstr "Welke taal wilt U gebruiken tijdens de installatie ?" #: ../text.py:135 msgid "Select All" msgstr "Alles selecteren" #: ../iw/language_support_gui.py:209 ../text.py:135 msgid "Reset" msgstr "" #: ../text.py:137 msgid "Choose the languages to be installed:" msgstr "Kies de talen die geinstalleerd moeten worden" #: ../text.py:141 ../text.py:1035 msgid "Language Support" msgstr "Taal Ondersteuning" #: ../text.py:172 ../textw/firewall_text.py:124 ../textw/firewall_text.py:189 msgid "Invalid Choice" msgstr "Ongeldige Keuze" #: ../text.py:173 msgid "You must select at least one language to install." msgstr "U moet tenminste 1 taal kiezen" #: ../text.py:201 msgid "Default Language" msgstr "Standaard taal" #: ../text.py:202 msgid "Choose the default language: " msgstr "Kies de standaard taal: " #: ../text.py:226 ../text.py:950 ../text.py:975 msgid "Keyboard Selection" msgstr "Toetsenbord Keuze" #: ../text.py:227 msgid "Which model keyboard is attached to this computer?" msgstr "Wat voor toetsenbord gebruikt U voor deze computer?" #: ../text.py:287 msgid "Upgrade Existing Installation" msgstr "Een bestaande installatie upgraden" #: ../text.py:309 ../text.py:978 msgid "Installation Type" msgstr "Type Installatie" #: ../text.py:310 msgid "What type of system would you like to install?" msgstr "Wat voor soort systeem wilt U installeren?" #: ../text.py:347 ../text.py:366 msgid "Red Hat Linux" msgstr "Red Hat Linux" #: ../text.py:348 msgid "" "Welcome to Red Hat Linux!\n" "\n" "This installation process is outlined in detail in the Official Red Hat " "Linux Installation Guide available from Red Hat Software. If you have access " "to this manual, you should read the installation section before continuing.\n" "\n" "If you have purchased Official Red Hat Linux, be sure to register your " "purchase through our web site, http://www.redhat.com/." msgstr "" "Welkom bij Red Hat Linux!\n" "\n" "Dit installatie process is uitvoerig beschreven in de 'Official Red Hat " "Linus Installation Guide' die beschikbaar is van Red Hat Software. Als U " "deze handleiding bezit, raden wij U aan om het installatie hoofdstuk te " "lezen voordat U verder gaat. \n" "\n" "Als u een 'Official Red Hat Linux' heeft gekocht, bevelen wij U aan om uw " "aanschaf te registreren via onze website, http://www.redhat.com/." #: ../text.py:367 msgid "" "Welcome to the Red Hat Linux!\n" "\n" "You have entered reconfiguration mode, which will allow you to configure " "site-specific options of your computer.\n" "\n" "To exit without changing your setup select the Cancel button below." msgstr "" #: ../libfdisk/gnomefsedit.c:920 ../libfdisk/gnomefsedit.c:2033 #: ../libfdisk/gnomefsedit.c:2631 ../libfdisk/newtfsedit.c:578 #: ../libfdisk/newtfsedit.c:1698 ../loader/devices.c:238 #: ../loader/devices.c:532 ../loader/loader.c:2228 ../loader/pcmcia.c:104 #: ../text.py:374 ../text.py:377 ../text.py:764 ../text.py:765 ../text.py:880 #: ../text.py:882 ../textw/lilo_text.py:139 ../textw/silo_text.py:136 #: ../textw/silo_text.py:154 ../textw/userauth_text.py:63 msgid "Cancel" msgstr "Afbreken" #: ../text.py:414 msgid "X probe results" msgstr "" #: ../text.py:434 ../text.py:454 msgid "Unlisted Card" msgstr "Onbekende kaart" #: ../text.py:442 msgid "Video Card Selection" msgstr "Videokaart keuze" #: ../text.py:443 msgid "Which video card do you have?" msgstr "Welke videokaart heeft Uw computer?" #: ../text.py:456 msgid "X Server Selection" msgstr "X Server Keuze" #: ../text.py:456 msgid "Choose a server" msgstr "Kies een server" #: ../text.py:527 msgid "Installation to begin" msgstr "" #: ../iw/confirm_gui.py:45 ../text.py:528 msgid "" "A complete log of your installation will be in /tmp/install.log after " "rebooting your system. You may want to keep this file for later reference." msgstr "" #: ../text.py:539 msgid "Upgrade to begin" msgstr "" #: ../iw/confirm_gui.py:41 ../text.py:540 msgid "" "A complete log of your upgrade will be in /tmp/upgrade.log after rebooting " "your system. You may want to keep this file for later reference." msgstr "" #: ../text.py:560 msgid "" " to reboot " " " msgstr "" #: ../text.py:562 ../text.py:585 msgid "Complete" msgstr "Voltooid" #: ../iw/congrats_gui.py:34 ../text.py:563 msgid "" "Congratulations, installation is complete.\n" "\n" "Press return to reboot, and be sure to remove your boot medium after the " "system reboots, or your system will rerun the install. For information on " "fixes which are available for this release of Red Hat Linux, consult the " "Errata available from http://www.redhat.com/errata.\n" "\n" "Information on configuring and using your Red Hat Linux system is contained " "in the Red Hat Linux manuals." msgstr "" #: ../text.py:581 msgid "" " to exit " " " msgstr "" #: ../text.py:586 msgid "" "Congratulations, configuration is complete.\n" "\n" " For information on fixes which are available for this release of Red Hat " "Linux, consult the Errata available from http://www.redhat.com.\n" "\n" "Information on further configuring your system is available at " "http://www.redhat.com/support/manuals/" msgstr "" #: ../text.py:653 msgid "Package Installation" msgstr "Pakket Installatie" #: ../text.py:655 msgid "Name : " msgstr "Naam : " #: ../text.py:656 msgid "Size : " msgstr "Grootte :" #: ../text.py:657 msgid "Summary: " msgstr "Beschr.:" #: ../text.py:683 msgid " Packages" msgstr " Pakketten" #: ../text.py:684 msgid " Bytes" msgstr " Bytes" #: ../text.py:685 msgid " Time" msgstr " Tijd" #: ../text.py:687 msgid "Total :" msgstr "Totaal :" #: ../text.py:694 msgid "Completed: " msgstr "Voltooid :" #: ../text.py:704 msgid "Remaining: " msgstr "Resterend:" #: ../text.py:818 msgid "Help not available" msgstr "Hulptekst niet beschikbaar" #: ../text.py:819 msgid "No help is available for this install." msgstr "Voor deze installatie is geen hulptekst beschikbaar" #: ../text.py:877 msgid "Save Crash Dump" msgstr "" #: ../text.py:888 msgid "" "An internal error occurred in the installation program. Please report this " "error to Red Hat (through the bugzilla.redhat.com web site) as soon as " "possible. The information on this failure may be saved to a floppy disk, and " "will help Red Hat in fixing the problem.\n" "\n" msgstr "" #: ../text.py:895 ../text.py:898 msgid "Save" msgstr "Bewaren" #: ../text.py:895 ../text.py:896 msgid "Debug" msgstr "Foutzoeken" #: ../text.py:906 msgid " " msgstr "" #: ../text.py:910 msgid "Red Hat Linux (C) 2001 Red Hat, Inc." msgstr "Red Hat Linux (C) 2001 Red Hat, Inc." #: ../text.py:913 msgid "" " for help | between elements | selects | next screen" msgstr "" " hulp | volgende regel | selecteren | volgend scherm" #: ../text.py:915 msgid "" " / between elements | selects | next " "screen" msgstr "" #: ../iw/welcome_gui.py:11 ../iw/welcome_gui.py:39 ../text.py:948 #: ../text.py:977 msgid "Welcome" msgstr "Welkom" #: ../text.py:952 ../text.py:1026 msgid "Hostname Setup" msgstr "Machinenaam Instelling" #: ../text.py:954 ../text.py:1023 msgid "Network Setup" msgstr "Netwerk Instellingen" #: ../iw/firewall_gui.py:12 ../text.py:956 ../text.py:1028 #: ../textw/firewall_text.py:11 msgid "Firewall Configuration" msgstr "Firewall Instellingen" #: ../text.py:958 ../text.py:1037 msgid "Language Default" msgstr "Standaard Taal" #: ../text.py:960 ../text.py:1040 msgid "Time Zone Setup" msgstr "Tijdzone Keuze" #: ../text.py:962 ../text.py:1042 ../textw/userauth_text.py:9 msgid "Root Password" msgstr "Root Wachtwoord" #: ../text.py:964 ../text.py:1044 ../textw/userauth_text.py:172 msgid "User Account Setup" msgstr "Gebruikers Account Setup" #: ../text.py:966 ../text.py:1046 msgid "Authentication" msgstr "" #: ../text.py:968 msgid "Configuration Complete" msgstr "Configuratie Voltooid" #: ../text.py:986 ../textw/silo_text.py:28 ../textw/silo_text.py:101 #: ../textw/silo_text.py:213 msgid "SILO Configuration" msgstr "SILO Configuratie" #: ../text.py:992 ../textw/lilo_text.py:36 ../textw/lilo_text.py:105 #: ../textw/lilo_text.py:232 msgid "LILO Configuration" msgstr "LILO Configuratie" #: ../text.py:999 msgid "Automatic Partition" msgstr "Automatische Partitionering" #: ../iw/lilo_gui.py:225 ../iw/lilo_gui.py:388 ../iw/silo_gui.py:127 #: ../iw/silo_gui.py:280 ../iw/upgrade_swap_gui.py:130 ../text.py:1001 #: ../text.py:1005 ../textw/upgrade_text.py:56 msgid "Partition" msgstr "Partitie" #: ../text.py:1003 msgid "Manually Partition" msgstr "Handmatig Partitioneren" #: ../text.py:1007 ../textw/partitioning_text.py:335 msgid "Root Filesystem Size" msgstr "Root Bestandssysteem Grootte" #: ../text.py:1009 msgid "Swap" msgstr "Swap" #: ../text.py:1011 ../textw/partitioning_text.py:392 #: ../textw/partitioning_text.py:412 msgid "Boot Partition Warning" msgstr "Boot Partitie Waarschuwing" #: ../text.py:1013 msgid "Filesystem Formatting" msgstr "Bestandssysteem Formateren" #: ../iw/mouse_gui.py:56 ../text.py:1030 ../text.py:1032 msgid "Mouse Configuration" msgstr "Muis Configureren" #: ../text.py:1048 msgid "Package Groups" msgstr "Pakket Groepen" #: ../text.py:1050 ../text.py:1079 msgid "Individual Packages" msgstr "Individuele Pakketten" #: ../text.py:1052 ../text.py:1080 ../textw/packages_text.py:304 msgid "Package Dependencies" msgstr "Pakket Afhankelijkheden" #: ../iw/xconfig_gui.py:846 ../text.py:1054 ../text.py:1062 msgid "X Configuration" msgstr "X Configuratie" #: ../text.py:1056 msgid "Installation Begins" msgstr "De installatie begint" #: ../text.py:1058 msgid "Install System" msgstr "Installeer systeem" #: ../text.py:1059 ../text.py:1061 ../text.py:1085 ../text.py:1087 msgid "Boot Disk" msgstr "Boot Disk" #: ../text.py:1064 msgid "Installation Complete" msgstr "Installatie Voltooid" #: ../text.py:1069 msgid "Examine System" msgstr "Systeem Onderzoeken" #: ../text.py:1070 #, fuzzy msgid "System Swap Space" msgstr "Systeem om te upgraden" #: ../text.py:1077 msgid "Customize Upgrade" msgstr "Upgrade Aanpassen" #: ../text.py:1082 msgid "Upgrade Begins" msgstr "De upgrade begint" #: ../text.py:1084 msgid "Upgrade System" msgstr "Systeem Upgraden" #: ../text.py:1088 msgid "Upgrade Complete" msgstr "Upgrade Voltooid" #: ../text.py:1135 msgid "Cancelled" msgstr "Afgebroken" #: ../text.py:1136 msgid "I can't go to the previous step from here. You will have to try again." msgstr "" "Het is niet mogelijk om naar de vorige stap terug te gaan. Probeer opniew." #: ../todo.py:740 msgid "Creating boot disk..." msgstr "Boot disk aanmaken" #: ../todo.py:759 msgid "Reading" msgstr "Lezen" #: ../todo.py:760 msgid "Reading package information..." msgstr "" #: ../todo.py:1057 msgid "Dependency Check" msgstr "Afhankelijkheden controle" #: ../todo.py:1058 msgid "Checking dependencies in packages selected for installation..." msgstr "" #: ../todo.py:1092 ../todo.py:1136 ../todo.py:1145 ../todo.py:1171 #: ../todo.py:1302 msgid "no suggestion" msgstr "geen suggesties" #: ../todo.py:1188 ../upgrade.py:99 #, fuzzy msgid "Dirty Filesystems" msgstr "Root Bestandssysteem Grootte" #: ../todo.py:1189 msgid "" "One or more of the filesystems listed in the /etc/fstab on your Linux system " "cannot be mounted. Please fix this problem and try to upgrade again." msgstr "" #: ../todo.py:1204 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" #: ../todo.py:1224 msgid "Finding" msgstr "" #: ../todo.py:1225 msgid "Finding packages to upgrade..." msgstr "" #: ../todo.py:1240 msgid "Rebuild of RPM database failed. You may be out of disk space?" msgstr "" #: ../todo.py:1253 msgid "An error occured when finding the packages to upgrade." msgstr "" #: ../todo.py:1538 msgid "Processing" msgstr "" #: ../todo.py:1539 msgid "Preparing to install..." msgstr "Installatie voorbereiden..." #: ../todo.py:1573 #, c-format msgid "" "The file %s cannot be opened. This is due to a missing file, a bad package, " "or bad media. Press to try again." msgstr "" #: ../todo.py:1828 #, c-format msgid "Upgrading %s.\n" msgstr "" #: ../todo.py:1830 #, c-format msgid "Installing %s.\n" msgstr "" #: ../todo.py:1875 msgid "" "You don't appear to have enough disk space to install the packages you've " "selected. You need more space on the following filesystems:\n" "\n" msgstr "" #: ../iw/upgrade_swap_gui.py:130 ../libfdisk/gnomefsedit.c:3177 #: ../textw/upgrade_text.py:55 ../todo.py:1878 ../todo.py:1896 msgid "Mount Point" msgstr "" #: ../todo.py:1878 msgid "Space Needed" msgstr "Benodigde schijfruimte" #: ../todo.py:1893 msgid "" "You don't appear to have enough file nodes to install the packages you've " "selected. You need more file nodes on the following filesystems:\n" "\n" msgstr "" #: ../todo.py:1896 msgid "Nodes Needed" msgstr "" #: ../todo.py:1902 msgid "Disk Space" msgstr "Schijfruimte" #: ../todo.py:1937 msgid "Post Install" msgstr "" #: ../todo.py:1938 msgid "Performing post install configuration..." msgstr "" #: ../todo.py:2077 msgid "" "An error occured while installing the bootloader.\n" "\n" "We HIGHLY recommend you make a recovery boot floppy when prompted, otherwise " "you may not be able to reboot into Red Hat Linux.\n" "\n" "The error reported was:\n" "\n" msgstr "" #: ../todo.py:2083 msgid "Bootloader Errors" msgstr "" #: ../upgrade.py:13 msgid "Searching" msgstr "" #: ../upgrade.py:14 msgid "Searching for Red Hat Linux installations..." msgstr "" #: ../upgrade.py:25 ../upgrade.py:53 #, c-format msgid "Error mounting ext2 filesystem on %s: %s" msgstr "" #: ../upgrade.py:100 msgid "" "One or more of the filesystems for your Linux system was not unmounted " "cleanly. Please boot your Linux installation, let the filesystems be " "checked, and shut down cleanly to upgrade." msgstr "" #: ../iw/xconfig_gui.py:12 ../xf86config.py:933 msgid "Video Card" msgstr "Video Kaart" #: ../iw/xconfig_gui.py:14 ../xf86config.py:935 msgid "Video Ram" msgstr "" #: ../xf86config.py:938 msgid "X server" msgstr "" #: ../xf86config.py:941 msgid "Unable to detect video card" msgstr "" #: ../iw/xconfig_gui.py:13 ../xf86config.py:948 ../xf86config.py:950 msgid "Monitor" msgstr "Beeldscherm" #: ../xf86config.py:950 msgid "Plug and Play Monitor" msgstr "Plug en Play Beeldscherm" #: ../xf86config.py:952 msgid "Horizontal frequency range" msgstr "" #: ../xf86config.py:954 msgid "Vertical frequency range" msgstr "" #: ../xserver.py:27 msgid "Mouse Not Detected" msgstr "Muis niet gevonden" #: ../xserver.py:28 msgid "" "Your mouse was not automatically detected. To proceed in the graphical " "installation mode, please proceed to the next screen and provide your mouse " "information. You may also use text mode installation which does not require " "a mouse." msgstr "" #: ../xserver.py:34 ../xserver.py:35 msgid "Use text mode" msgstr "" #: ../xserver.py:69 msgid "Probing for mouse type..." msgstr "" #: ../xserver.py:189 msgid "Waiting for X server to start...log located in /tmp/X.log\n" msgstr "" #: ../xserver.py:211 msgid " X server started successfully." msgstr "" #: ../iw/account_gui.py:15 msgid "Account Configuration" msgstr "" #: ../iw/account_gui.py:39 msgid "Root password accepted." msgstr "root-wachtwoord geaccepteerd" #: ../iw/account_gui.py:42 msgid "Please enter root password." msgstr "Voer het root-wachtwoord in." #: ../iw/account_gui.py:44 msgid "Root password is too short." msgstr "Het root-wachtwoord is te kort" #: ../iw/account_gui.py:46 msgid "Root passwords do not match." msgstr "De root-wachtwoorden komen niet overeen." #: ../iw/account_gui.py:59 msgid "User password accepted." msgstr "Wachtwoord geaccepteerd" #: ../iw/account_gui.py:64 msgid "Root account can not be added here." msgstr "" #: ../iw/account_gui.py:66 msgid "Please enter user password." msgstr "" #: ../iw/account_gui.py:68 msgid "User password is too short." msgstr "Wachtwoord is te kort." #: ../iw/account_gui.py:70 msgid "User passwords do not match." msgstr "Wachtwoorden komen niet overeen." #: ../iw/account_gui.py:192 msgid "Root Password: " msgstr "Root Wachtwoord:" #: ../iw/account_gui.py:195 msgid "Confirm: " msgstr "Bevestig: " #: ../iw/account_gui.py:256 ../iw/account_gui.py:305 msgid "Account Name" msgstr "" #: ../iw/account_gui.py:260 ../textw/userauth_text.py:81 msgid "Password" msgstr "Wachtwoord" #: ../iw/account_gui.py:264 ../textw/userauth_text.py:82 msgid "Password (confirm)" msgstr "Wachtwoord (bevestig)" #: ../iw/account_gui.py:275 ../iw/account_gui.py:305 #: ../textw/userauth_text.py:83 ../textw/userauth_text.py:184 msgid "Full Name" msgstr "Volledige Naam" #: ../iw/account_gui.py:284 ../libfdisk/newtfsedit.c:1483 #: ../textw/userauth_text.py:198 msgid "Add" msgstr "Toevoegen" #: ../iw/account_gui.py:286 ../libfdisk/newtfsedit.c:1476 #: ../libfdisk/newtfsedit.c:1484 ../textw/lilo_text.py:223 #: ../textw/partitioning_text.py:65 ../textw/silo_text.py:205 #: ../textw/silo_text.py:227 ../textw/userauth_text.py:199 msgid "Edit" msgstr "Wijzigen" #: ../iw/account_gui.py:288 ../libfdisk/newtfsedit.c:1484 #: ../textw/userauth_text.py:198 msgid "Delete" msgstr "Verwijderen" #: ../iw/account_gui.py:290 msgid "New" msgstr "Nieuw" #: ../iw/auth_gui.py:11 ../textw/userauth_text.py:299 msgid "Authentication Configuration" msgstr "" #: ../iw/auth_gui.py:78 msgid "Enable MD5 passwords" msgstr "" #: ../iw/auth_gui.py:79 msgid "Enable shadow passwords" msgstr "" #: ../iw/auth_gui.py:82 ../textw/userauth_text.py:308 msgid "Enable NIS" msgstr "" #: ../iw/auth_gui.py:83 msgid "Use broadcast to find NIS server" msgstr "" #: ../iw/auth_gui.py:95 msgid "NIS Domain: " msgstr "" #: ../iw/auth_gui.py:97 msgid "NIS Server: " msgstr "" #: ../iw/auth_gui.py:136 ../textw/userauth_text.py:342 msgid "Enable LDAP" msgstr "" #: ../iw/auth_gui.py:139 msgid "Use TLS lookups" msgstr "" #: ../iw/auth_gui.py:140 ../textw/userauth_text.py:348 msgid "LDAP Server:" msgstr "" #: ../iw/auth_gui.py:142 ../textw/userauth_text.py:350 msgid "LDAP Base DN:" msgstr "" #: ../iw/auth_gui.py:173 ../textw/userauth_text.py:371 msgid "Enable Kerberos" msgstr "" #: ../iw/auth_gui.py:177 ../textw/userauth_text.py:378 msgid "Realm:" msgstr "" #: ../iw/auth_gui.py:179 ../textw/userauth_text.py:380 msgid "KDC:" msgstr "" #: ../iw/auth_gui.py:181 ../textw/userauth_text.py:382 msgid "Admin Server:" msgstr "" #: ../iw/bootdisk_gui.py:11 msgid "Bootdisk Creation" msgstr "Opstartfloppy Aanmaken" #: ../iw/bootdisk_gui.py:58 msgid "" "Please remove the install floppy (if used) and insert a blank floppy in the " "first floppy drive. All data on this disk will be erased during creation of " "the boot disk." msgstr "" #: ../iw/bootdisk_gui.py:62 ../textw/bootdisk_text.py:70 msgid "" "An error occured while making the boot disk. Please make sure that there is " "a formatted floppy in the first floppy drive." msgstr "" #: ../iw/bootdisk_gui.py:69 msgid "Skip boot disk creation" msgstr "Opstart floppy niet aanmaken" #: ../iw/confirm_gui.py:13 msgid "About to Upgrade" msgstr "" #: ../iw/confirm_gui.py:16 msgid "About to Install" msgstr "" #: ../iw/confirm_gui.py:34 msgid "Click next to begin upgrade of Red Hat Linux." msgstr "Kies 'volgende' om de upgrade van Red Hat Linux te starten." #: ../iw/confirm_gui.py:36 msgid "Click next to begin installation of Red Hat Linux." msgstr "Kies 'volgende' om de installatie van Red Hat Linux te starten." #: ../iw/congrats_gui.py:11 ../iw/congrats_gui.py:60 msgid "Congratulations" msgstr "Gefeliciteerd" #: ../iw/congrats_gui.py:83 msgid "" "Congratulations, configuration is complete.\n" "\n" "For information on fixes which are available for this release of Red Hat " "Linux, consult the Errata available from http://www.redhat.com.\n" "\n" "Information on further configuring your system is available in the Official " "Red Hat Linux Manuals available at http://www.redhat.com/support/manuals/." msgstr "" #: ../iw/dependencies_gui.py:9 msgid "Unresolved Dependencies" msgstr "" #: ../iw/dependencies_gui.py:31 ../iw/package_gui.py:544 #: ../textw/packages_text.py:12 ../textw/packages_text.py:275 #, c-format msgid "Total install size: %s" msgstr "" #: ../iw/dependencies_gui.py:69 ../iw/package_gui.py:400 #: ../iw/progress_gui.py:209 ../textw/packages_text.py:312 msgid "Package" msgstr "Pakket" #: ../iw/dependencies_gui.py:69 ../textw/packages_text.py:312 msgid "Requirement" msgstr "" #: ../iw/dependencies_gui.py:87 ../textw/packages_text.py:327 msgid "Install packages to satisfy dependencies" msgstr "" #: ../iw/dependencies_gui.py:90 ../textw/packages_text.py:328 msgid "Do not install packages that have dependencies" msgstr "" #: ../iw/dependencies_gui.py:94 ../textw/packages_text.py:329 msgid "Ignore package dependencies" msgstr "" #: ../iw/examine_gui.py:10 msgid "Upgrade Examine" msgstr "" #: ../iw/examine_gui.py:45 msgid "" "You don't have any Linux partitions.\n" " You can't upgrade this sytem!" msgstr "" #: ../iw/examine_gui.py:54 msgid "Please select the device containing the root filesystem: " msgstr "" #: ../iw/examine_gui.py:81 ../textw/upgrade_text.py:189 #, c-format msgid "Upgrading the Red Hat Linux installation on partition /dev/%s" msgstr "" #: ../iw/examine_gui.py:85 msgid "Customize packages to be upgraded" msgstr "" #: ../iw/fdisk_gui.py:12 ../textw/partitioning_text.py:23 msgid "fdisk" msgstr "" #: ../iw/fdisk_gui.py:105 msgid "Select drive to run fdisk on" msgstr "" #: ../iw/firewall_gui.py:117 msgid "Warning: " msgstr "" #: ../iw/firewall_gui.py:117 msgid " is an invalid port." msgstr "" #: ../iw/firewall_gui.py:120 msgid "The format is 'port:protocol'. For example, '1234:udp'" msgstr "" #: ../iw/firewall_gui.py:204 msgid "Please choose your security level: " msgstr "Kies uw beveiligingsniveau" #: ../iw/firewall_gui.py:213 ../textw/firewall_text.py:33 msgid "High" msgstr "Zwaar" #: ../iw/firewall_gui.py:214 ../textw/firewall_text.py:36 msgid "Medium" msgstr "Middelmatig" #: ../iw/firewall_gui.py:215 ../textw/firewall_text.py:39 msgid "No firewall" msgstr "Geen firewall" #: ../iw/firewall_gui.py:231 msgid "Use default firewall rules" msgstr "" #: ../iw/firewall_gui.py:232 ../textw/firewall_text.py:9 msgid "Customize" msgstr "Aanpassen" #: ../iw/firewall_gui.py:245 msgid "Trusted devices:" msgstr "" #: ../iw/firewall_gui.py:270 ../textw/firewall_text.py:79 msgid "Allow incoming:" msgstr "" #: ../iw/firewall_gui.py:299 msgid "Other ports:" msgstr "" #: ../iw/format_gui.py:14 msgid "Choose partitions to Format" msgstr "" #: ../iw/format_gui.py:61 msgid "Check for bad blocks while formatting" msgstr "" #: ../iw/installpath_gui.py:99 msgid "Install Type" msgstr "Installatie Type" #: ../iw/installpath_gui.py:182 msgid "Install" msgstr "" #: ../iw/installpath_gui.py:184 msgid "Upgrade" msgstr "" #: ../iw/keyboard_gui.py:16 msgid "Keyboard Configuration" msgstr "Toetsenbord Instellingen" #: ../iw/keyboard_gui.py:87 msgid "Model" msgstr "Model" #: ../iw/keyboard_gui.py:107 msgid "Layout" msgstr "" #: ../iw/keyboard_gui.py:127 msgid "Dead Keys" msgstr "" #: ../iw/keyboard_gui.py:137 msgid "Enable dead keys" msgstr "" #: ../iw/keyboard_gui.py:138 msgid "Disable dead keys" msgstr "" #: ../iw/keyboard_gui.py:151 msgid "Test your selection here:" msgstr "Test uw keuze hier:" #: ../iw/language_gui.py:39 ../loader/lang.c:292 msgid "What language should be used during the installation process?" msgstr "Welke taal wilt U tijdens de installatie gebruiken?" #: ../iw/language_support_gui.py:144 msgid "Choose the default language: " msgstr "Kies de standaard taal : " #: ../iw/language_support_gui.py:155 msgid "Currently installed languages:" msgstr "" #: ../iw/language_support_gui.py:157 msgid "Choose the languages to install:" msgstr "Kies de talen die U wilt installeren" #: ../iw/language_support_gui.py:203 msgid "Select all" msgstr "Alles selecteren" #: ../iw/language_support_gui.py:223 msgid "Select as default" msgstr "Als standaard selecteren" #: ../iw/lilo_gui.py:33 msgid "Lilo Configuration" msgstr "Lilo Instellingen" #: ../iw/lilo_gui.py:59 ../iw/package_gui.py:61 ../iw/upgrade_swap_gui.py:34 msgid "Aborting upgrade" msgstr "" #: ../iw/lilo_gui.py:228 ../iw/lilo_gui.py:389 ../iw/silo_gui.py:132 #: ../iw/silo_gui.py:281 ../libfdisk/gnomefsedit.c:3181 msgid "Type" msgstr "Type" #: ../iw/lilo_gui.py:277 msgid "Install LILO boot record on:" msgstr "" #: ../iw/lilo_gui.py:284 ../iw/silo_gui.py:173 ../textw/lilo_text.py:102 #: ../textw/silo_text.py:64 msgid "Master Boot Record (MBR)" msgstr "Master Boot Record (MBR)" #: ../iw/lilo_gui.py:288 ../iw/silo_gui.py:176 ../textw/lilo_text.py:103 #: ../textw/silo_text.py:65 msgid "First sector of boot partition" msgstr "Eerste sector van de opstart partitie" #: ../iw/lilo_gui.py:292 ../textw/lilo_text.py:27 msgid "Use linear mode (needed for some SCSI drives)" msgstr "'linear mode' gebruiken (nodig voor een aantal SCSI apparaten)" #: ../iw/lilo_gui.py:303 ../iw/silo_gui.py:208 msgid "Kernel parameters" msgstr "Kernel paramters" #: ../iw/lilo_gui.py:320 ../iw/silo_gui.py:226 msgid "Create boot disk" msgstr "Boot floppy aanmaken" #: ../iw/lilo_gui.py:334 msgid "Install LILO" msgstr "LILO Installeren" #: ../iw/lilo_gui.py:361 ../iw/silo_gui.py:257 ../textw/lilo_text.py:214 #: ../textw/silo_text.py:196 msgid "Default" msgstr "" #: ../iw/lilo_gui.py:361 ../iw/mouse_gui.py:145 ../iw/silo_gui.py:257 #: ../libfdisk/gnomefsedit.c:3178 ../textw/lilo_text.py:133 #: ../textw/lilo_text.py:214 ../textw/mouse_text.py:25 #: ../textw/silo_text.py:131 ../textw/silo_text.py:196 msgid "Device" msgstr "" #: ../iw/lilo_gui.py:361 ../iw/silo_gui.py:257 ../textw/lilo_text.py:214 #: ../textw/silo_text.py:196 msgid "Partition type" msgstr "" #: ../iw/lilo_gui.py:361 ../iw/lilo_gui.py:400 ../iw/silo_gui.py:257 #: ../iw/silo_gui.py:292 ../textw/lilo_text.py:134 ../textw/lilo_text.py:214 #: ../textw/silo_text.py:132 ../textw/silo_text.py:196 msgid "Boot label" msgstr "" #: ../iw/lilo_gui.py:396 ../iw/silo_gui.py:288 msgid "Default boot image" msgstr "" #: ../iw/mouse_gui.py:134 ../textw/mouse_text.py:7 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "" #: ../iw/mouse_gui.py:135 ../textw/mouse_text.py:8 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "" #: ../iw/mouse_gui.py:136 ../textw/mouse_text.py:9 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "" #: ../iw/mouse_gui.py:137 ../textw/mouse_text.py:10 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "" #: ../iw/mouse_gui.py:139 msgid "Emulate 3 Buttons" msgstr "" #: ../iw/mouse_gui.py:145 msgid "Port" msgstr "Poort" #: ../iw/network_gui.py:11 ../textw/network_text.py:104 msgid "Network Configuration" msgstr "Netwerk Instellingen" #: ../iw/network_gui.py:178 msgid "Configure using DHCP" msgstr "" #: ../iw/network_gui.py:184 msgid "Activate on boot" msgstr "" #: ../iw/network_gui.py:193 msgid "IP Address" msgstr "IP Adres" #: ../iw/network_gui.py:194 ../loader/net.c:771 msgid "Netmask" msgstr "" #: ../iw/network_gui.py:195 ../loader/loader.c:276 msgid "Network" msgstr "" #: ../iw/network_gui.py:196 msgid "Broadcast" msgstr "" #: ../iw/network_gui.py:248 ../loader/net.c:575 ../loader/net.c:773 #: ../textw/network_text.py:161 msgid "Hostname" msgstr "" #: ../iw/network_gui.py:249 msgid "Gateway" msgstr "" #: ../iw/network_gui.py:249 msgid "Primary DNS" msgstr "Eerste DNS server" #: ../iw/network_gui.py:249 msgid "Secondary DNS" msgstr "Tweede DNS server" #: ../iw/network_gui.py:249 msgid "Ternary DNS" msgstr "Derde DNS server" #: ../iw/package_gui.py:22 ../textw/upgrade_text.py:14 #: ../textw/upgrade_text.py:133 msgid "Proceed with upgrade?" msgstr "" #: ../iw/package_gui.py:23 ../textw/upgrade_text.py:15 #: ../textw/upgrade_text.py:134 msgid "" "The filesystems of the Linux installation you have chosen to upgrade have " "already been mounted. You cannot go back past this point. \n" "\n" msgstr "" #: ../iw/package_gui.py:27 #, fuzzy msgid "Would you like to continue with the upgrade?" msgstr "Wilt U uw systeem instellen ?" #: ../iw/package_gui.py:38 msgid "Individual Package Selection" msgstr "" #: ../iw/package_gui.py:322 msgid "Total install size: " msgstr "" #: ../iw/package_gui.py:402 msgid "Size (MB)" msgstr "Grootte (MB)" #: ../iw/package_gui.py:433 msgid "Total size: " msgstr "Totale grootte:" #: ../iw/package_gui.py:436 msgid "Select all in group" msgstr "" #: ../iw/package_gui.py:440 msgid "Unselect all in group" msgstr "" #: ../iw/package_gui.py:475 msgid "File not found" msgstr "Bestand niet gevonden" #: ../iw/package_gui.py:518 ../textw/packages_text.py:60 #: ../textw/packages_text.py:241 msgid "Package Group Selection" msgstr "" #: ../iw/package_gui.py:578 #, c-format msgid "" "The following error occurred while retreiving hdlist file:\n" "\n" "%s\n" "\n" "Installer will exit now." msgstr "" #: ../iw/package_gui.py:583 msgid "" "An error has occurred while retreiving the hdlist file. The installation " "media or image is probably corrupt. Installer will exit now." msgstr "" #: ../iw/package_gui.py:649 ../textw/packages_text.py:54 msgid "Select individual packages" msgstr "Individuele Pakketten kiezen" #: ../iw/progress_gui.py:55 msgid "Installing Packages" msgstr "Pakketten Installeren" #: ../iw/progress_gui.py:147 #, c-format msgid "%s KBytes" msgstr "%s KByte" #: ../iw/progress_gui.py:210 ../iw/progress_gui.py:263 msgid "Size" msgstr "Grootte" #: ../iw/progress_gui.py:211 msgid "Summary" msgstr "Overzicht" #: ../iw/progress_gui.py:241 msgid "Package Progress: " msgstr "Pakket Voortgang:" #: ../iw/progress_gui.py:246 msgid "Total Progress: " msgstr "Algemene Voortgang:" #: ../iw/progress_gui.py:263 msgid "Status" msgstr "Status" #: ../iw/progress_gui.py:263 msgid "Packages" msgstr "Pakketten" #: ../iw/progress_gui.py:263 msgid "Time" msgstr "Tijd" #: ../iw/progress_gui.py:273 msgid "Total" msgstr "Totaal" #: ../iw/progress_gui.py:274 msgid "Completed" msgstr "Voltooid" #: ../iw/progress_gui.py:275 msgid "Remaining" msgstr "Resterend" #: ../iw/rootpartition_gui.py:39 ../textw/partitioning_text.py:23 msgid "Disk Druid" msgstr "" #: ../iw/rootpartition_gui.py:51 ../textw/partitioning_text.py:216 msgid "Low Memory" msgstr "" #: ../iw/rootpartition_gui.py:52 ../textw/partitioning_text.py:217 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that okay?" msgstr "" #: ../iw/rootpartition_gui.py:82 msgid "" "You have put the partition containing the kernel (the boot partition) above " "the 1024 cylinder limit, and it appears that this systems BIOS does not " "support booting from above this limit. Proceeding will most likely make the " "system unable to reboot into Linux.\n" "\n" "If you choose to proceed, it is HIGHLY recommended you make a boot floppy " "when asked. This will guarantee you have a way to boot into the system after " "installation.\n" "\n" "Press OK to proceed, or Cancel to go back and reassign the boot partition." msgstr "" #: ../iw/rootpartition_gui.py:98 ../iw/rootpartition_gui.py:492 #: ../textw/partitioning_text.py:413 msgid "" "You have put the partition containing the kernel (the boot partition) above " "the 1024 cylinder limit. It appears that this systems BIOS supports booting " "from above this limit. \n" "\n" "It is HIGHLY recommended you make a boot floppy when asked by the installer, " "as this is a new feature in recent motherboards and is not always reliable. " "Making a boot disk will guarantee you can boot your system once installed." msgstr "" #: ../iw/rootpartition_gui.py:221 ../textw/partitioning_text.py:336 #, c-format msgid "" "You've chosen to put your root filesystem in a file on an already-existing " "DOS or Windows filesystem. How large, in megabytes, should would you like " "the root filesystem to be, and how much swap space would you like? They must " "total less then %d megabytes in size." msgstr "" #: ../iw/rootpartition_gui.py:251 msgid "Root filesystem size:" msgstr "" #: ../iw/rootpartition_gui.py:256 msgid "Swap space size:" msgstr "" #: ../iw/rootpartition_gui.py:331 ../textw/partitioning_text.py:150 msgid "Automatic Partitioning" msgstr "Automatisch Partitioneren" #: ../iw/rootpartition_gui.py:382 #, fuzzy msgid "Disk Partitioning" msgstr "Handmatig Partitioneren" #: ../iw/rootpartition_gui.py:384 #, c-format msgid "" "Please select the type of disk partitioning you would like to use.\n" "\n" "%s\n" "\n" "Selecting manual partitioning allows you to create the partitions by hand." msgstr "" #: ../iw/rootpartition_gui.py:390 msgid "Automatic Partitioning Failed" msgstr "Automatisch Partitioneren is mislukt" #: ../iw/rootpartition_gui.py:391 msgid "" "\n" "There is not sufficient disk space in order to automatically partition your " "disk. You will need to manually partition your disks for Red Hat Linux to " "install.\n" "\n" "Please choose the tool you would like to use to partition your system for " "Red Hat Linux." msgstr "" #: ../iw/rootpartition_gui.py:398 msgid "Manual Partitioning" msgstr "Handmatig Partitioneren" #: ../iw/rootpartition_gui.py:399 msgid "" "\n" "Please choose the tool you would like to use to partition your system for " "Red Hat Linux." msgstr "" #: ../iw/rootpartition_gui.py:413 msgid "Automatically partition and REMOVE DATA" msgstr "" #: ../iw/rootpartition_gui.py:420 msgid "Manually partition with Disk Druid" msgstr "" #: ../iw/rootpartition_gui.py:432 msgid "Manually partition with fdisk [experts only]" msgstr "" #: ../iw/rootpartition_gui.py:455 msgid "Boot Partition Location Warning" msgstr "" #: ../iw/rootpartition_gui.py:479 ../textw/partitioning_text.py:393 msgid "" "You have put the partition containing the kernel (the boot partition) above " "the 1024 cylinder limit, and it appears that this systems BIOS does not " "support booting from above this limit. Proceeding will most likely make the " "system unable to reboot into Linux.\n" "\n" "If you choose to proceed, it is HIGHLY recommended you make a boot floppy " "when asked. This will guarantee you have a way to boot into the system after " "installation.\n" "\n" "Are you sure you want to proceed?" msgstr "" #: ../iw/rootpartition_gui.py:510 ../iw/welcome_gui.py:89 #: ../libfdisk/fsedit.c:953 ../libfdisk/gnomefsedit.c:835 #: ../libfdisk/gnomefsedit.c:1243 ../libfdisk/gnomefsedit.c:1382 #: ../libfdisk/gnomefsedit.c:1404 ../libfdisk/gnomefsedit.c:2476 #: ../libfdisk/gnomefsedit.c:2799 ../libfdisk/gnomefsedit.c:2854 #: ../libfdisk/newtfsedit.c:615 ../libfdisk/newtfsedit.c:742 #: ../libfdisk/newtfsedit.c:874 ../libfdisk/newtfsedit.c:1680 #: ../libfdisk/newtfsedit.c:1698 ../libfdisk/newtfsedit.c:1785 #: ../loader/devices.c:230 ../loader/loader.c:873 ../loader/net.c:854 #: ../textw/bootdisk_text.py:12 ../textw/bootdisk_text.py:30 #: ../textw/bootdisk_text.py:38 ../textw/lilo_text.py:62 #: ../textw/partitioning_text.py:221 ../textw/partitioning_text.py:404 #: ../textw/upgrade_text.py:206 msgid "Yes" msgstr "Ja" #: ../iw/rootpartition_gui.py:512 ../iw/welcome_gui.py:92 #: ../libfdisk/fsedit.c:953 ../libfdisk/gnomefsedit.c:835 #: ../libfdisk/gnomefsedit.c:1243 ../libfdisk/gnomefsedit.c:1382 #: ../libfdisk/gnomefsedit.c:1404 ../libfdisk/gnomefsedit.c:2476 #: ../libfdisk/gnomefsedit.c:2799 ../libfdisk/gnomefsedit.c:2854 #: ../libfdisk/newtfsedit.c:615 ../libfdisk/newtfsedit.c:742 #: ../libfdisk/newtfsedit.c:874 ../libfdisk/newtfsedit.c:1680 #: ../libfdisk/newtfsedit.c:1698 ../libfdisk/newtfsedit.c:1785 #: ../loader/devices.c:231 ../loader/net.c:854 ../textw/bootdisk_text.py:12 #: ../textw/bootdisk_text.py:30 ../textw/bootdisk_text.py:41 #: ../textw/lilo_text.py:62 ../textw/partitioning_text.py:404 #: ../textw/upgrade_text.py:206 ../textw/upgrade_text.py:212 msgid "No" msgstr "Nee" #: ../iw/silo_gui.py:20 msgid "Silo Configuration" msgstr "Silo Instellingen" #: ../iw/silo_gui.py:164 msgid "Install SILO boot record on:" msgstr "" #: ../iw/silo_gui.py:181 msgid "Create PROM alias" msgstr "" #: ../iw/silo_gui.py:204 msgid "Set default PROM boot device to linux" msgstr "" #: ../iw/silo_gui.py:236 msgid "Do not install SILO" msgstr "SILO niet installeren" #: ../iw/timezone_gui.py:31 ../textw/timezone_text.py:89 msgid "Time Zone Selection" msgstr "Tijdzone Keuze" #: ../iw/timezone_gui.py:158 msgid "View:" msgstr "" #: ../iw/timezone_gui.py:166 ../iw/timezone_gui.py:167 msgid "System clock uses UTC" msgstr "" #: ../iw/timezone_gui.py:215 msgid "Use Daylight Saving Time (US only)" msgstr "Zomertijd gebruiken (alleen in de VS)" #: ../iw/timezone_gui.py:229 msgid "Location" msgstr "Lokatie" #: ../iw/timezone_gui.py:230 msgid "UTC Offset" msgstr "" #: ../iw/upgrade_swap_gui.py:18 #, fuzzy msgid "Upgrade Swap Partition" msgstr "RAID Partitie" #: ../iw/upgrade_swap_gui.py:102 ../textw/upgrade_text.py:38 #, c-format msgid "" "The 2.4 kernel needs significantly more swap than older kernels, as much as " "twice as much swap space as RAM on the system. You currently have %dMB of " "swap configured, but you may create additional swap space on one of your " "file systems now." msgstr "" #: ../iw/upgrade_swap_gui.py:116 msgid "I want to create a swap file" msgstr "" #: ../iw/upgrade_swap_gui.py:125 msgid "Select the partition to put the swap file on:" msgstr "" #: ../iw/upgrade_swap_gui.py:130 #, fuzzy msgid "Free Space (MB)" msgstr "Schijfruimte" #: ../iw/upgrade_swap_gui.py:145 #, c-format msgid "" "It is recommended that your swap file be at least %d MB. Please enter a " "size for the swap file:" msgstr "" #: ../iw/upgrade_swap_gui.py:158 ../textw/upgrade_text.py:74 #, fuzzy msgid "Swap file size (MB):" msgstr "Grootte (MB)" #: ../iw/upgrade_swap_gui.py:166 msgid "I don't want to create a swap file" msgstr "" #: ../iw/upgrade_swap_gui.py:176 msgid "" "It is stongly recommended that you create a swap file. Failure to do so " "could cause the installer to abort abnormally. Are you sure that you wish " "to continue?" msgstr "" #: ../iw/upgrade_swap_gui.py:185 ../textw/upgrade_text.py:118 msgid "The swap file must be between 1 and 2000 MB in size." msgstr "" #: ../iw/upgrade_swap_gui.py:192 ../textw/upgrade_text.py:114 msgid "" "There is not enough space on the device you selected for the swap partition." msgstr "" #: ../iw/welcome_gui.py:81 msgid "Would you like to configure your system?" msgstr "Wilt U uw systeem instellen ?" #: ../iw/xconfig_gui.py:15 msgid "Horizontal Frequency Range" msgstr "" #: ../iw/xconfig_gui.py:16 msgid "Vertical Frequency Range" msgstr "" #: ../iw/xconfig_gui.py:17 msgid "Test failed" msgstr "Test is mislukt" #: ../iw/xconfig_gui.py:25 msgid "Customize Graphics Configuration" msgstr "Grafische Instellingen Aanpassen" #: ../iw/xconfig_gui.py:233 msgid "Color Depth:" msgstr "" #: ../iw/xconfig_gui.py:238 msgid "256 Colors (8 Bit)" msgstr "" #: ../iw/xconfig_gui.py:238 msgid "High Color (16 Bit)" msgstr "" #: ../iw/xconfig_gui.py:238 msgid "True Color (24 Bit)" msgstr "" #: ../iw/xconfig_gui.py:256 msgid "Screen Resolution:" msgstr "Scherm Resolutie:" #: ../iw/xconfig_gui.py:358 msgid " Test Setting " msgstr "" #: ../iw/xconfig_gui.py:375 msgid "Please choose your default desktop environment:" msgstr "" #: ../iw/xconfig_gui.py:385 ../iw/xconfig_gui.py:443 msgid "GNOME" msgstr "GNOME" #: ../iw/xconfig_gui.py:387 ../iw/xconfig_gui.py:457 msgid "KDE" msgstr "KDE" #: ../iw/xconfig_gui.py:426 msgid "Your desktop environment is:" msgstr "Uw desktop omgeving is:" #: ../iw/xconfig_gui.py:467 msgid "Please choose your login type:" msgstr "" #: ../iw/xconfig_gui.py:474 msgid "Text" msgstr "Tekst" #: ../iw/xconfig_gui.py:475 msgid "Graphical" msgstr "Grafisch" #: ../iw/xconfig_gui.py:513 msgid "Bits per Pixel" msgstr "" #: ../iw/xconfig_gui.py:531 msgid "Monitor Configuration" msgstr "Beeldscherm Instellingen" #: ../iw/xconfig_gui.py:736 msgid "DDC Probed Monitor" msgstr "" #: ../iw/xconfig_gui.py:800 ../iw/xconfig_gui.py:1530 msgid "Restore original values" msgstr "Oorspronkelijk waardes terughalen" #: ../iw/xconfig_gui.py:808 msgid "Horizontal Sync:" msgstr "" #: ../iw/xconfig_gui.py:810 msgid "Vertical Sync:" msgstr "" #: ../iw/xconfig_gui.py:816 msgid "kHz" msgstr "kHz" #: ../iw/xconfig_gui.py:819 msgid "Hz" msgstr "Hz" #: ../iw/xconfig_gui.py:980 msgid "" "Your video ram size can not be autodetected. Choose your video ram size " "from the choices below:" msgstr "" #: ../iw/xconfig_gui.py:991 ../iw/xconfig_gui.py:1012 msgid "" "In most cases your video hardware can be probed to automatically determine " "the best settings for your display." msgstr "" #: ../iw/xconfig_gui.py:1000 msgid "" "If the probed settings do not match your hardware select the correct setting " "below:" msgstr "" #: ../iw/xconfig_gui.py:1021 msgid "Autoprobe results:" msgstr "" #: ../iw/xconfig_gui.py:1465 msgid "Video card RAM: " msgstr "" #: ../iw/xconfig_gui.py:1534 msgid "Skip X Configuration" msgstr "X Configuratie overslaan" #: ../textw/bootdisk_text.py:13 msgid "" "A custom boot disk provides a way of booting into your Linux system without " "depending on the normal bootloader. This is useful if you don't want to " "install lilo on your system, another operating system removes lilo, or lilo " "doesn't work with your hardware configuration. A custom boot disk can also " "be used with the Red Hat rescue image, making it much easier to recover from " "severe system failures.\n" "\n" "Would you like to create a boot disk for your system?" msgstr "" #: ../textw/bootdisk_text.py:32 msgid "" "\n" "On SMCC made Ultra machines floppy booting probably does not work\n" "\n" msgstr "" #: ../textw/bootdisk_text.py:35 ../textw/bootdisk_text.py:56 msgid "Bootdisk" msgstr "Opstartschijf" #: ../textw/bootdisk_text.py:54 ../textw/bootdisk_text.py:62 #: ../textw/bootdisk_text.py:73 ../textw/lilo_text.py:33 #: ../textw/silo_text.py:25 ../textw/upgrade_text.py:67 msgid "Skip" msgstr "Overslaan" #: ../textw/bootdisk_text.py:57 msgid "" "If you have the install floppy in your drive, first remove it. Then insert a " "blank floppy in the first floppy drive. All data on this disk will be erased " "during creation of the boot disk." msgstr "" #: ../textw/firewall_text.py:13 msgid "" "A firewall protects against unauthorized network intrusions. High security " "blocks all incoming accesses. Medium blocks access to system services (such " "as telnet or printing), but allows other connections. No firewall allows all " "connections and is not recommended. " msgstr "" #: ../textw/firewall_text.py:29 msgid "Security Level:" msgstr "Beveiligingsniveau:" #: ../textw/firewall_text.py:59 msgid "Trusted Devices:" msgstr "Betrouwbare interfaces:" #: ../textw/firewall_text.py:84 msgid "DHCP" msgstr "DHCP" #: ../textw/firewall_text.py:86 msgid "SSH" msgstr "SSH" #: ../textw/firewall_text.py:88 msgid "Telnet" msgstr "Telnet" #: ../textw/firewall_text.py:90 msgid "WWW (HTTP)" msgstr "WWW (HTTP)" #: ../textw/firewall_text.py:92 msgid "Mail (SMTP)" msgstr "E-mail (SMTP)" #: ../loader/loader.c:1241 ../loader/loader.c:1250 #: ../textw/firewall_text.py:94 msgid "FTP" msgstr "FTP" #: ../textw/firewall_text.py:98 msgid "Other ports" msgstr "" #: ../textw/firewall_text.py:125 msgid "You cannot customize a disabled firewall." msgstr "" #: ../textw/firewall_text.py:130 msgid "Firewall Configuration - Customize" msgstr "" #: ../textw/firewall_text.py:132 msgid "" "You can customize your firewall in two ways. First, you can select to allow " "all traffic from certain network interfaces. Second, you can allow certain " "protocols explicitly through the firewall. Specify additional ports in the " "form 'service:protocol', such as 'imap:tcp'. " msgstr "" #: ../textw/firewall_text.py:190 #, c-format msgid "Warning: %s is not a valid port." msgstr "Waarschuwing: %s is geen geldige poort." #: ../textw/lilo_text.py:21 ../textw/silo_text.py:14 msgid "" "A few systems will need to pass special options to the kernel at boot time " "for the system to function properly. If you need to pass boot options to the " "kernel, enter them now. If you don't need any or aren't sure, leave this " "blank." msgstr "" #: ../textw/lilo_text.py:52 #, fuzzy msgid "Skip LILO" msgstr "Overslaan" #: ../textw/lilo_text.py:53 msgid "" "You have elected to not install LILO. It is strongly recommended that you do " "install LILO unless you have an advanced need. LILO is almost always " "required in order to reboot your system into Linux directly from the hard " "drive.\n" "\n" "Are you sure you want to skip LILO installation?" msgstr "" #: ../textw/lilo_text.py:106 ../textw/silo_text.py:103 msgid "Where do you want to install the bootloader?" msgstr "Waar wilt U de bootloader installeren?" #: ../textw/lilo_text.py:138 ../textw/silo_text.py:136 #: ../textw/silo_text.py:157 msgid "Clear" msgstr "Wissen" #: ../textw/lilo_text.py:147 msgid "Edit Boot Label Please" msgstr "" #: ../textw/lilo_text.py:165 ../textw/lilo_text.py:170 msgid "Invalid Boot Label" msgstr "Ongeldig Boot Label" #: ../textw/lilo_text.py:166 msgid "Boot label may not be empty." msgstr "Het Boot Label mag niet leeg zijn" #: ../textw/lilo_text.py:171 msgid "Boot label contains illegal characters." msgstr "Het Boot Label bevat ongeldige tekens." #: ../textw/lilo_text.py:227 ../textw/silo_text.py:208 msgid "" "The boot manager Red Hat uses can boot other operating systems as well. You " "need to tell me what partitions you would like to be able to boot and what " "label you want to use for each of them." msgstr "" #: ../textw/mouse_text.py:26 msgid "What device is your mouse located on?" msgstr "" #: ../textw/mouse_text.py:57 msgid "Which model mouse is attached to this computer?" msgstr "Wat voor muis gebruikt U?" #: ../textw/mouse_text.py:68 msgid "Emulate 3 Buttons?" msgstr "" #: ../textw/mouse_text.py:71 msgid "Mouse Selection" msgstr "Muis keuze" #: ../textw/network_text.py:66 msgid "Use bootp/dhcp" msgstr "" #: ../loader/net.c:307 ../textw/network_text.py:71 msgid "IP address:" msgstr "IP adres:" #: ../loader/net.c:310 ../textw/network_text.py:72 msgid "Netmask:" msgstr "" #: ../loader/net.c:313 ../textw/network_text.py:73 msgid "Default gateway (IP):" msgstr "" #: ../loader/net.c:316 ../textw/network_text.py:74 msgid "Primary nameserver:" msgstr "Hoofd nameserver" #: ../textw/network_text.py:75 msgid "Secondary nameserver:" msgstr "Tweede nameserver:" #: ../textw/network_text.py:76 msgid "Ternary nameserver:" msgstr "Derde nameserver:" #: ../textw/network_text.py:121 msgid "Invalid information" msgstr "Ongeldige informatie" #: ../textw/network_text.py:122 msgid "You must enter valid IP information to continue" msgstr "U moet geldige IP instellingen invoeren om verder te gaan" #: ../textw/network_text.py:157 msgid "Hostname Configuration" msgstr "" #: ../textw/network_text.py:158 msgid "" "The hostname is the name of your computer. If your computer is attached to " "a network, this may be assigned by your network administrator." msgstr "" #: ../textw/packages_text.py:91 msgid "Package :" msgstr "Pakket :" #: ../textw/packages_text.py:96 msgid "Size :" msgstr "Grootte :" #: ../textw/packages_text.py:97 #, c-format msgid "%.1f KBytes" msgstr "%.1f KByte" #: ../textw/packages_text.py:116 msgid "Total size" msgstr "Totale grootte" #: ../textw/packages_text.py:249 msgid "" " ,<+>,<-> selection | help | package description" msgstr "" #: ../textw/packages_text.py:306 msgid "" "Some of the packages you have selected to install require packages you have " "not selected. If you just select Ok all of those required packages will be " "installed." msgstr "" #: ../textw/partitioning_text.py:15 ../textw/partitioning_text.py:59 msgid "Disk Setup" msgstr "" #: ../textw/partitioning_text.py:16 msgid "" "Disk Druid is a tool for partitioning and setting up mount points. It is " "designed to be easier to use than Linux's traditional disk partitioning " "sofware, fdisk, as well as more powerful. However, there are some cases " "where fdisk may be preferred.\n" "\n" "Which tool would you like to use?" msgstr "" #: ../textw/partitioning_text.py:60 msgid "" "To install Red Hat Linux, you must have at least one partition of 150 MB " "dedicated to Linux. We suggest placing that partition on one of the first " "two hard drives in your system so you can boot into Linux with LILO." msgstr "" "Om Red Hat Linux to installeren moet U een partitie van tenminste 150 MB " "speciaal voor Linux reserveren. We raden U aan om deze partitie op een van " "de eerste twee harddisks te plaatsen, zodat U LILO kunt gebruiken om Linux " "op te starten." #: ../loader/loader.c:341 ../loader/loader.c:366 #: ../textw/partitioning_text.py:65 msgid "Done" msgstr "Gereed" #: ../textw/partitioning_text.py:151 #, c-format msgid "" "%s\n" "\n" "If you don't want to do this, you can continue with this install by " "partitioning manually, or you can go back and perform a fully customized " "installation." msgstr "" #: ../textw/partitioning_text.py:156 ../textw/partitioning_text.py:158 msgid "Continue" msgstr "Doorgaan" #: ../textw/partitioning_text.py:156 msgid "Manually partition" msgstr "Partities handmatig instellen" #: ../textw/partitioning_text.py:237 msgid "" "What partitions would you like to format? We strongly suggest formatting all " "of the system partitions, including /, /usr, and /var. There is no need to " "format /home or /usr/local if they have already been configured during a " "previous install." msgstr "" #: ../textw/partitioning_text.py:257 msgid "Check for bad blocks during format" msgstr "Controleren op diskfouten tijdens het formatteren" #: ../textw/partitioning_text.py:262 msgid "Choose Partitions to Format" msgstr "Kies de partities die U wilt formatteren" #: ../textw/partitioning_text.py:341 msgid "Root filesystem size" msgstr "" #: ../textw/partitioning_text.py:342 msgid "Swap space" msgstr "" #: ../textw/partitioning_text.py:352 ../textw/partitioning_text.py:358 #: ../textw/partitioning_text.py:365 msgid "Bad Size" msgstr "Ongeldige grootte" #: ../textw/partitioning_text.py:353 msgid "The size you enter must be a number." msgstr "" #: ../textw/partitioning_text.py:359 #, c-format msgid "" "The total size must be smaller then the amount of free space on the disk, " "which is %d megabytes." msgstr "" #: ../textw/partitioning_text.py:366 msgid "" "Neither the root file system size nor the swap space size may be greater " "then 2000 megabytes." msgstr "" #: ../textw/silo_text.py:66 msgid "Create PROM alias `linux'" msgstr "" #: ../textw/silo_text.py:67 msgid "Set default PROM boot device" msgstr "" #: ../textw/silo_text.py:144 msgid "Edit Boot Label" msgstr "" #: ../textw/timezone_text.py:71 msgid "What time zone are you located in?" msgstr "In welke tijdzone bevindt U zich?" #: ../textw/timezone_text.py:86 msgid "Hardware clock set to GMT?" msgstr "" #: ../textw/upgrade_text.py:19 ../textw/upgrade_text.py:138 msgid "" "If you would like to exit the upgrade select Exit, or choose Ok to continue " "with the upgrade." msgstr "" #: ../textw/upgrade_text.py:56 #, fuzzy msgid "Free Space" msgstr "Schijfruimte" #: ../textw/upgrade_text.py:71 #, fuzzy msgid "Suggested size (MB):" msgstr "Grootte (MB)" #: ../textw/upgrade_text.py:82 #, fuzzy msgid "Add Swap" msgstr "Swap" #: ../textw/upgrade_text.py:108 msgid "The value you entered is not a valid number." msgstr "" #: ../textw/upgrade_text.py:153 msgid "You don't have any Linux partitions. You can't upgrade this system!" msgstr "U heeft geen Linux partities. U kunt dit systeem niet upgraden!" #: ../textw/upgrade_text.py:170 msgid "System to Upgrade" msgstr "Systeem om te upgraden" #: ../textw/upgrade_text.py:188 #, fuzzy msgid "Upgrade Partition" msgstr "RAID Partitie" #: ../textw/upgrade_text.py:198 msgid "Customize Packages to Upgrade" msgstr "Aanpassen van de uptegraden pakketten" #: ../textw/upgrade_text.py:199 msgid "" "The packages you have installed, and any other packages which are needed to " "satisfy their dependencies, have been selected for installation. Would you " "like to customize the set of packages that will be upgraded?" msgstr "" #: ../textw/userauth_text.py:11 msgid "" "Pick a root password. You must type it twice to ensure you know what it is " "and didn't make a mistake in typing. Remember that the root password is a " "critical part of system security!" msgstr "" "Kies een wachtwoord voor de 'root' gebruiker. U moet het wachtwoord twee " "maal invoeren om er zeker van te zijn dat U geen typfout heeft gemaakt. Denk " "er aan dat het root-wachtwoord een critisch onderdeel van de " "systeembeveiliging is!" #: ../loader/urls.c:345 ../textw/userauth_text.py:24 msgid "Password:" msgstr "Wachtwoord:" #: ../textw/userauth_text.py:25 msgid "Password (again):" msgstr "Wachtwoord (herhaal)" #: ../textw/userauth_text.py:41 ../textw/userauth_text.py:108 msgid "Password Length" msgstr "Wachtwoord lengte" #: ../textw/userauth_text.py:42 msgid "The root password must be at least 6 characters long." msgstr "Het root-wachtwoord moet tenminste 6 tekens lang zijn." #: ../textw/userauth_text.py:46 ../textw/userauth_text.py:116 msgid "Password Mismatch" msgstr "" #: ../textw/userauth_text.py:47 ../textw/userauth_text.py:117 msgid "The passwords you entered were different. Please try again." msgstr "De wachtwoorden zijn verschillend. Probeer opniew." #: ../textw/userauth_text.py:72 msgid "Edit User" msgstr "Gebruiker wijzigen" #: ../textw/userauth_text.py:75 msgid "Add User" msgstr "Gebruiker toevoegen" #: ../textw/userauth_text.py:80 msgid "User ID" msgstr "" #: ../textw/userauth_text.py:95 msgid "Bad User ID" msgstr "" #: ../textw/userauth_text.py:96 msgid "" "User IDs must be less than 8 characters and contain only characters A-Z, " "a-z, and 0-9." msgstr "" #: ../textw/userauth_text.py:103 msgid "Missing User ID" msgstr "" #: ../textw/userauth_text.py:104 msgid "You must provide a user ID" msgstr "" #: ../textw/userauth_text.py:109 msgid "The password must be at least 6 characters long." msgstr "Het wachtwoord moet tenminste 6 tekens lang zijn." #: ../textw/userauth_text.py:125 ../textw/userauth_text.py:133 msgid "User Exists" msgstr "" #: ../textw/userauth_text.py:126 msgid "" "The root user is already configured. You don't need to add this user here." msgstr "" #: ../textw/userauth_text.py:134 msgid "This user id already exists. Choose another." msgstr "" #: ../textw/userauth_text.py:161 msgid "" "You should use a normal user account for most activities on your system. By " "not using the root account casually, you'll reduce the chance of disrupting " "your system's configuration." msgstr "" #: ../textw/userauth_text.py:174 msgid "" "What user account would you like to have on the system? You should have at " "least one non-root account for normal work, but multi-user systems can have " "any number of accounts set up." msgstr "" #: ../textw/userauth_text.py:184 msgid "User name" msgstr "Gebruikersnaam" #: ../textw/userauth_text.py:211 msgid "Enter the information for the user." msgstr "" #: ../textw/userauth_text.py:229 msgid "Change the information for this user." msgstr "" #: ../textw/userauth_text.py:301 msgid "Use Shadow Passwords" msgstr "" #: ../textw/userauth_text.py:303 msgid "Enable MD5 Passwords" msgstr "" #: ../textw/userauth_text.py:314 msgid "NIS Domain:" msgstr "" #: ../textw/userauth_text.py:316 msgid "NIS Server:" msgstr "" #: ../textw/userauth_text.py:318 msgid "or use:" msgstr "" #: ../textw/userauth_text.py:321 msgid "Request server via broadcast" msgstr "" #: ../textw/userauth_text.py:360 msgid "Use TLS connections" msgstr "" #: ../installclasses/custom.py:10 msgid "Custom System" msgstr "" #: ../installclasses/custom.py:22 ../installclasses/workstation.py:32 msgid "" "Automatic partitioning will erase any preexisting Linux installations on " "your system." msgstr "" #: ../installclasses/laptop.py:7 msgid "Laptop" msgstr "Laptop" #: ../installclasses/server.py:9 msgid "Server System" msgstr "Server Computer" #: ../installclasses/server.py:38 msgid "" "Automatic partitioning will erase ALL DATA on your hard drive to make room " "for your Linux installation." msgstr "" #: ../installclasses/workstation.py:8 ../libfdisk/gnomefsedit.c:2719 msgid "Workstation" msgstr "" #: ../libfdisk/fsedit.c:401 msgid "partitioning did not meet requirements" msgstr "" #: ../libfdisk/fsedit.c:922 ../libfdisk/fsedit.c:929 ../libfdisk/fsedit.c:936 #: ../libfdisk/fsedit.c:945 ../libfdisk/fsedit.c:972 ../libfdisk/fsedit.c:985 #: ../libfdisk/fsedit.c:995 msgid "Bad Mount Point" msgstr "" #: ../libfdisk/fsedit.c:923 #, c-format msgid "The %s directory must be on the root filesystem." msgstr "" #: ../libfdisk/fsedit.c:930 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points must begin with a leading /." msgstr "" #: ../libfdisk/fsedit.c:937 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may not end with a /." msgstr "" #: ../libfdisk/fsedit.c:946 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may only printable characters." msgstr "" #: ../libfdisk/fsedit.c:954 msgid "" "You've asked to put your root (/) filesystem on a DOS-style FAT partition. " "You can do this, but you may not use any other filesystems for your Linux " "system. Additionally, there will be a speed penalty for not using " "Linux-native partitions. Do you want to continue?" msgstr "" #: ../libfdisk/fsedit.c:973 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "System partitions must be on Linux Native partitions." msgstr "" #: ../libfdisk/fsedit.c:986 #, c-format msgid "On this platform, /boot must be on a DOS-compatible filesystem %x." msgstr "" #: ../libfdisk/fsedit.c:996 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "/usr must be on a Linux Native partition or an NFS volume." msgstr "" #: ../libfdisk/fsedit.c:1024 msgid "Too Many Drives" msgstr "" #: ../libfdisk/fsedit.c:1025 msgid "" "You have more drives than this program supports. Please use the standard " "fdisk program to setup your drives and please notify Red Hat Software that " "you saw this message." msgstr "" #: ../libfdisk/fsedit.c:1034 msgid "Error Creating Device Nodes" msgstr "" #: ../libfdisk/fsedit.c:1035 msgid "" "An error has occurred while trying to create device nodes for the hard " "drives in your system. This may be because you have run out of disk space " "on the /tmp partition." msgstr "" #: ../libfdisk/fsedit.c:1051 msgid "No Drives Found" msgstr "" #: ../libfdisk/fsedit.c:1052 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem." msgstr "" #: ../libfdisk/fsedit.c:1381 ../libfdisk/fsedit.c:1444 #, c-format msgid "" "An error occurred reading the partition table for the block device %s. The " "error was" msgstr "" #: ../libfdisk/fsedit.c:1384 ../libfdisk/fsedit.c:1462 ../loader/net.c:277 #: ../loader/net.c:402 msgid "Retry" msgstr "" #: ../libfdisk/fsedit.c:1384 ../libfdisk/fsedit.c:1427 #: ../libfdisk/fsedit.c:1449 ../libfdisk/fsedit.c:1455 #: ../libfdisk/fsedit.c:1462 msgid "Skip Drive" msgstr "" #: ../libfdisk/fsedit.c:1421 #, c-format msgid "" "The partition table on device %s is corrupted. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive." msgstr "" #: ../libfdisk/fsedit.c:1426 msgid "Bad Partition Table" msgstr "" #: ../libfdisk/fsedit.c:1427 msgid "Initialize" msgstr "" #: ../libfdisk/fsedit.c:1475 msgid "BSD Disklabel" msgstr "" #: ../libfdisk/fsedit.c:1475 msgid "" "A disk with a BSD disklabel has been found. The Red Hat installation only " "supports BSD Disklabels in read-only mode, so you must use a custom install " "and fdisk (instead of Disk Druid) for machines with BSD Disklabels." msgstr "" #: ../libfdisk/fsedit.c:1505 ../libfdisk/fsedit.c:1528 #: ../libfdisk/fsedit.c:1554 #, c-format msgid "System error %d" msgstr "" #: ../libfdisk/fsedit.c:1514 ../libfdisk/fsedit.c:1516 #: ../libfdisk/fsedit.c:1543 ../libfdisk/fsedit.c:1573 msgid "Fdisk Error" msgstr "" #: ../libfdisk/fsedit.c:1538 msgid "" "This occurs because the drive geometry detected by the kernel used by the " "installer is different than the drive geometry used when the drive was " "partitioned. This can be corrected by specifying the drive geometry on the " "kernel command line when booting the installer." msgstr "" #: ../libfdisk/fsedit.c:1564 msgid "" "This error has occurred because there is a logical partition on the drive " "which has a partition type of zero (0). A partition type of zero means that " "the drive's partitioning is not completely defined, and may have been caused " "by another operating system's partitioning program. This condition is not " "supported by the anaconda installer. You may be able to set the partition " "type correctly using your other operating system's partitioning program." msgstr "" #: ../libfdisk/gnomefsedit.c:551 ../libfdisk/gnomefsedit.c:958 #: ../libfdisk/gnomefsedit.c:2059 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:559 ../libfdisk/gnomefsedit.c:960 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:751 #, c-format msgid "Couldnt find partition named %s\n" msgstr "" #: ../libfdisk/gnomefsedit.c:761 ../libfdisk/gnomefsedit.c:793 msgid "Root partition" msgstr "" #: ../libfdisk/gnomefsedit.c:763 msgid "" "The growth of the root (/) RAID array appears to have been stunted by the " "1024 cylinder boot limit. If this is the case then adding a /boot partition " "(50 MB is fine) may allow the root partition to grow to fill the disk." msgstr "" #: ../libfdisk/gnomefsedit.c:795 msgid "" "The growth of the root (/) partition appears to have been stunted by the " "1024 cylinder boot limit. If this is the case then adding a /boot partition " "(50 MB is fine) may allow the root partition to grow to fill the disk." msgstr "" #: ../libfdisk/gnomefsedit.c:835 ../libfdisk/newtfsedit.c:874 msgid "Delete Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:836 ../libfdisk/newtfsedit.c:875 msgid "Are you sure you want to delete this partition?" msgstr "" #: ../libfdisk/gnomefsedit.c:885 ../libfdisk/newtfsedit.c:347 msgid "Cannot Edit Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:886 ../libfdisk/newtfsedit.c:348 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "edit other partitions." msgstr "" #: ../libfdisk/gnomefsedit.c:904 ../libfdisk/gnomefsedit.c:910 #: ../libfdisk/gnomefsedit.c:914 ../libfdisk/gnomefsedit.c:916 #: ../libfdisk/newtfsedit.c:371 ../libfdisk/newtfsedit.c:377 #: ../libfdisk/newtfsedit.c:381 ../libfdisk/newtfsedit.c:383 msgid "Edit Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:931 ../libfdisk/gnomefsedit.c:2042 #: ../libfdisk/newtfsedit.c:392 msgid "Mount Point:" msgstr "" #: ../libfdisk/gnomefsedit.c:973 ../libfdisk/newtfsedit.c:411 msgid "Size (Megs):" msgstr "" #: ../libfdisk/gnomefsedit.c:1005 msgid "Use remaining space?" msgstr "" #: ../libfdisk/gnomefsedit.c:1024 ../libfdisk/newtfsedit.c:445 msgid "Allocation Status:" msgstr "" #: ../libfdisk/gnomefsedit.c:1028 ../libfdisk/newtfsedit.c:447 msgid "Successful" msgstr "" #: ../libfdisk/gnomefsedit.c:1031 ../libfdisk/newtfsedit.c:449 msgid "Failed" msgstr "" #: ../libfdisk/gnomefsedit.c:1043 ../libfdisk/newtfsedit.c:454 msgid "Failure Reason:" msgstr "" #: ../libfdisk/gnomefsedit.c:1057 ../libfdisk/gnomefsedit.c:2080 msgid "Partition Type:" msgstr "" #: ../libfdisk/gnomefsedit.c:1140 ../libfdisk/newtfsedit.c:524 msgid "Allowable Drives:" msgstr "" #: ../libfdisk/gnomefsedit.c:1243 ../libfdisk/gnomefsedit.c:2279 #: ../libfdisk/newtfsedit.c:615 msgid "No Mount Point" msgstr "" #: ../libfdisk/gnomefsedit.c:1244 ../libfdisk/newtfsedit.c:616 msgid "" "You have not selected a mount point for this partition. Are you sure you " "want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1268 ../libfdisk/gnomefsedit.c:1305 #: ../libfdisk/gnomefsedit.c:2287 ../libfdisk/newtfsedit.c:639 #: ../libfdisk/newtfsedit.c:672 msgid "Mount Point Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1269 ../libfdisk/newtfsedit.c:640 msgid "" "You have tried to assign the '/' mount point to a FAT-style partition. You " "cannot do this now because mount points have been assigned to ext2 " "partitions also. Clear those mount points and then you will be able to " "assign '/' to this partition." msgstr "" #: ../libfdisk/gnomefsedit.c:1306 ../libfdisk/newtfsedit.c:673 msgid "" "The mount point requested is either an illegal path or is already in use. " "Please select a valid mount point." msgstr "" #: ../libfdisk/gnomefsedit.c:1339 ../libfdisk/newtfsedit.c:698 msgid "Size Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1340 ../libfdisk/newtfsedit.c:699 msgid "" "The size requested is illegal. Make sure the size is greater and zero (0), " "and is specified int decimal (base 10) format." msgstr "" #: ../libfdisk/gnomefsedit.c:1358 ../libfdisk/gnomefsedit.c:2422 #: ../libfdisk/newtfsedit.c:717 msgid "Swap Size Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1359 ../libfdisk/gnomefsedit.c:2423 #: ../libfdisk/newtfsedit.c:718 #, c-format msgid "" "You have created a swap partition which is too large. The maximum size of a " "swap partition is %ld Megabytes." msgstr "" #: ../libfdisk/gnomefsedit.c:1373 ../libfdisk/newtfsedit.c:734 #, c-format msgid "" "It is recommended that the root (/) partition have a minimum size of %ld " "Megabytes. You are trying to create one which is %ld Megabytes, which could " "cause the install to fail.\n" "\n" "Are you sure you want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1381 ../libfdisk/newtfsedit.c:742 msgid "Warning: Root FS Size" msgstr "" #: ../libfdisk/gnomefsedit.c:1393 msgid "No Drives Specified" msgstr "Geen drivers geselecteerd" #: ../libfdisk/gnomefsedit.c:1395 msgid "You must constrain this partition to at least one drive." msgstr "" #: ../libfdisk/gnomefsedit.c:1403 ../libfdisk/gnomefsedit.c:1410 msgid "No RAID Drive Constraint" msgstr "" #: ../libfdisk/gnomefsedit.c:1405 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive.\n" " Are you sure you want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1412 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive. Please select one drive to constrain this partition to." msgstr "" #: ../libfdisk/gnomefsedit.c:1532 ../libfdisk/newtfsedit.c:848 msgid "Cannot Add Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:1533 ../libfdisk/newtfsedit.c:849 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "add other partitions." msgstr "" #. XXXXX - for now destroy the raid entry since it #. now contains unallocated partitions! #: ../libfdisk/gnomefsedit.c:1607 msgid "RAID Entry Incomplete" msgstr "" #: ../libfdisk/gnomefsedit.c:1608 #, c-format msgid "" "The raid device /dev/%s now contains partitions which are unallocated. The " "raid device /dev/%s will now be decomposed into its component partitions. " "Please recompose the raid device with allocated partitions." msgstr "" #: ../libfdisk/gnomefsedit.c:1657 msgid "Cannot Remove /boot" msgstr "" #: ../libfdisk/gnomefsedit.c:1658 msgid "" "You cannot remove \"/boot\" if \"/\" is on a RAID device. Switch \"/\" to a " "non-RAID device first." msgstr "" #. build list of why they all failed #: ../libfdisk/gnomefsedit.c:1725 ../libfdisk/gnomefsedit.c:1744 #: ../libfdisk/newtfsedit.c:138 ../libfdisk/newtfsedit.c:1679 msgid "Unallocated Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:1729 ../libfdisk/gnomefsedit.c:1739 #: ../libfdisk/newtfsedit.c:142 msgid "" "There are currently unallocated partition(s) present in the list of " "requested partitions. The unallocated partition(s) are shown below, along " "with the reason they were not allocated." msgstr "" #: ../libfdisk/gnomefsedit.c:2024 msgid "Cannot Edit Raid" msgstr "" #: ../libfdisk/gnomefsedit.c:2025 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "edit RAID devices." msgstr "" #: ../libfdisk/gnomefsedit.c:2125 msgid "RAID Device: /dev/" msgstr "" #: ../libfdisk/gnomefsedit.c:2148 msgid "RAID Type:" msgstr "" #: ../libfdisk/gnomefsedit.c:2185 msgid "Partitions For RAID Array:" msgstr "" #: ../libfdisk/gnomefsedit.c:2280 msgid "You have not selected a mount point. A mount point is required." msgstr "" #: ../libfdisk/gnomefsedit.c:2288 msgid "" "The mount point requested is already in use. Please select a valid mount " "point." msgstr "" #: ../libfdisk/gnomefsedit.c:2324 msgid "" "The bootable raid device can only include partitions from the first two " "drives on your system.\n" "\n" "These drives are: " msgstr "" #: ../libfdisk/gnomefsedit.c:2331 msgid "Booting From RAID Warning" msgstr "" #: ../libfdisk/gnomefsedit.c:2341 msgid "No RAID Device" msgstr "" #: ../libfdisk/gnomefsedit.c:2342 msgid "You need to selected a RAID device." msgstr "" #: ../libfdisk/gnomefsedit.c:2348 msgid "Used Raid Device" msgstr "" #: ../libfdisk/gnomefsedit.c:2349 #, c-format msgid "" "The raid device \"/dev/%s\" is already configured as a raid device. Please " "select another." msgstr "" #: ../libfdisk/gnomefsedit.c:2362 msgid "Not Enough Partitions" msgstr "Niet genoeg partities" #: ../libfdisk/gnomefsedit.c:2364 msgid "" "You have not configured enough partitions for the RAID type you have " "selected." msgstr "" #: ../libfdisk/gnomefsedit.c:2372 msgid "Illegal /boot RAID Type" msgstr "" #: ../libfdisk/gnomefsedit.c:2374 msgid "Boot partitions (/boot) are only allowed on RAID-1." msgstr "" #: ../libfdisk/gnomefsedit.c:2382 msgid "Illegal RAID mountpoint" msgstr "" #: ../libfdisk/gnomefsedit.c:2384 msgid "" "RAID partitions cannot be mounted as root (/) on Alpha without a /boot " "partition (non-RAID) as well." msgstr "" #: ../libfdisk/gnomefsedit.c:2468 #, c-format msgid "" "The partition %s is a pre-existing partition in the set of partitions for " "this RAID device. The mount point is set to /boot. Are you sure that it is " "possible to boot from this partition?" msgstr "" #: ../libfdisk/gnomefsedit.c:2475 msgid "Use Pre-existing Partition?" msgstr "Bestaande partitie gebruiken?" #: ../libfdisk/gnomefsedit.c:2589 msgid "Cannot Add RAID Devices" msgstr "" #: ../libfdisk/gnomefsedit.c:2590 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "add RAID devices." msgstr "" #: ../libfdisk/gnomefsedit.c:2631 msgid "Auto-Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:2638 msgid "Using Existing Disk Space" msgstr "Bestaande diskruimte gebruiken" #: ../libfdisk/gnomefsedit.c:2657 msgid "Remove Linux partitions" msgstr "Linux partities verwijderen" #: ../libfdisk/gnomefsedit.c:2668 msgid "Use existing free space" msgstr "Vrije ruimte gebruiken" #. workstation or server? #: ../libfdisk/gnomefsedit.c:2680 msgid "Intended Use" msgstr "" #: ../libfdisk/gnomefsedit.c:2699 ../libfdisk/gnomefsedit.c:2719 msgid "Server" msgstr "Server" #: ../libfdisk/gnomefsedit.c:2799 msgid "Delete RAID Device?" msgstr "RAID device verwijderen ?" #: ../libfdisk/gnomefsedit.c:2800 msgid "Are you sure you want to remove this RAID device?" msgstr "" #: ../libfdisk/gnomefsedit.c:2853 ../libfdisk/newtfsedit.c:1784 msgid "Reset Partition Table" msgstr "" #: ../libfdisk/gnomefsedit.c:2855 ../libfdisk/newtfsedit.c:1786 msgid "Reset partition table to original contents? " msgstr "De partitie tabel terugzetten naar de oorspronkelijke inhoud? " #: ../libfdisk/gnomefsedit.c:2891 ../libfdisk/gnomefsedit.c:2942 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2893 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2895 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:3179 msgid "Requested" msgstr "Gevraagd" #: ../libfdisk/gnomefsedit.c:3180 msgid "Actual" msgstr "Werkelijke" #: ../libfdisk/gnomefsedit.c:3353 msgid "Drive" msgstr "Drive" #: ../libfdisk/gnomefsedit.c:3354 msgid "Geom [C/H/S]" msgstr "Geom [C/H/S]" #: ../libfdisk/gnomefsedit.c:3355 msgid "Total (M)" msgstr "Totaal (M)" #: ../libfdisk/gnomefsedit.c:3356 msgid "Free (M)" msgstr "Beschikbaar (M)" #: ../libfdisk/gnomefsedit.c:3357 msgid "Used (M)" msgstr "Gebruikt (M)" #: ../libfdisk/gnomefsedit.c:3358 msgid "Used (%)" msgstr "Gebruikt (%)" #: ../libfdisk/gnomefsedit.c:3606 msgid "Unallocated Partitions Exist..." msgstr "Er zijn niet toegewezen partities..." #: ../libfdisk/gnomefsedit.c:3612 ../libfdisk/gnomefsedit.c:3630 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) or a " "RAID partition for the install to proceed." msgstr "" #: ../libfdisk/gnomefsedit.c:3701 msgid "Partitions" msgstr "Partities" #: ../libfdisk/gnomefsedit.c:3731 msgid "_Add..." msgstr "_Toevoegen" #: ../libfdisk/gnomefsedit.c:3738 msgid "_Edit..." msgstr "_Bewerken" #: ../libfdisk/gnomefsedit.c:3739 msgid "_Reset" msgstr "_Reset" #: ../libfdisk/gnomefsedit.c:3744 msgid "_Delete" msgstr "_Verwijder" #. try having make raid device button available in read-only mode too #: ../libfdisk/gnomefsedit.c:3757 msgid "_Make RAID Device" msgstr "" #: ../libfdisk/gnomefsedit.c:3767 msgid "Auto Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:3776 msgid "Drive Summary" msgstr "Drive Overzicht" #: ../libfdisk/newtfsedit.c:204 msgid "Swap Partition" msgstr "Swap Partitie" #: ../libfdisk/newtfsedit.c:210 msgid "Raid Partition" msgstr "RAID Partitie" #: ../libfdisk/newtfsedit.c:366 msgid "Edit New Partition" msgstr "Nieuwe Partitie Bewerken" #: ../libfdisk/newtfsedit.c:432 ../libfdisk/newtfsedit.c:433 msgid "Use remaining space?:" msgstr "Resterende ruimte gebruiken?:" #: ../libfdisk/newtfsedit.c:477 msgid "Type:" msgstr "Type:" #: ../libfdisk/newtfsedit.c:491 msgid "Unknown" msgstr "Onbekend" #: ../libfdisk/newtfsedit.c:1461 msgid "Current Disk Partitions" msgstr "" #: ../libfdisk/newtfsedit.c:1467 msgid " Mount Point Device Requested Actual Type" msgstr "" #: ../libfdisk/newtfsedit.c:1491 msgid "" " F1-Help F2-Add F3-Edit F4-Delete F5-Reset F12-Ok " msgstr "" #: ../libfdisk/newtfsedit.c:1494 msgid "Drive Summaries" msgstr "Drive overzicht" #: ../libfdisk/newtfsedit.c:1496 msgid " Drive Geom [C/H/S] Total Used Free" msgstr "" #: ../libfdisk/newtfsedit.c:1610 msgid "No Root Partition" msgstr "Geen Root Partitie" #: ../libfdisk/newtfsedit.c:1611 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) for " "the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1630 msgid "No Swap Partition" msgstr "Geen Swap Partitie" #: ../libfdisk/newtfsedit.c:1632 msgid "You must assign a swap partition for the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1658 msgid "No /boot/efi Partition" msgstr "" #: ../libfdisk/newtfsedit.c:1660 msgid "" "You must assign the mount point /boot/efi to a FAT-style primary partition " "for the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1681 msgid "" "There are unallocated partitions left. If you quit now they will not be " "written to the disk.\n" "\n" "Are you sure you want to exit?" msgstr "" #: ../libfdisk/newtfsedit.c:1697 msgid "Save Changes" msgstr "Wijzigingen Opslaan" #: ../libfdisk/newtfsedit.c:1699 msgid "Save changes to partition table(s)?" msgstr "Wijzigingen in de partitie-tabel opslaan?" #: ../libfdisk/newtfsedit.c:1744 msgid "You may only delete NFS mounts." msgstr "" #: ../loader/cdrom.c:26 msgid "Other CDROM" msgstr "" #: ../loader/cdrom.c:32 msgid "CDROM type" msgstr "CDROM type" #: ../loader/cdrom.c:32 msgid "What type of CDROM do you have?" msgstr "Welk type CDROM heeft U?" #: ../loader/cdrom.c:89 msgid "Initializing CDROM..." msgstr "" #: ../loader/devices.c:77 msgid "Miscellaneous" msgstr "Overig" #: ../loader/devices.c:86 msgid "" "This module can take parameters which affects its operation. If you don't " "know what parameters to supply, just skip this screen by pressing the \"OK\" " "button now." msgstr "" #: ../loader/devices.c:91 msgid "Module Parameters" msgstr "" #: ../loader/devices.c:230 ../loader/devices.c:237 ../loader/devices.c:358 #: ../loader/loader.c:289 ../loader/loader.c:350 ../loader/loader.c:366 msgid "Devices" msgstr "" #: ../loader/devices.c:232 msgid "Do you have a driver disk?" msgstr "" #: ../loader/devices.c:239 msgid "Insert your driver disk and press \"OK\" to continue." msgstr "" #: ../loader/devices.c:260 msgid "Failed to mount driver disk." msgstr "" #: ../loader/devices.c:267 msgid "" "The floppy disk you inserted is not a valid driver disk for this release of " "Red Hat Linux." msgstr "" #: ../loader/devices.c:327 msgid "" "Which driver should I try?. If the driver you need does not appear in this " "list, and you have a separate driver disk, please press F2." msgstr "" #: ../loader/devices.c:336 msgid "Specify module parameters" msgstr "" #: ../loader/devices.c:435 #, c-format msgid "Failed to insert %s module." msgstr "" #: ../loader/devices.c:481 #, c-format msgid "Failed to mount driver disk: %s." msgstr "" #: ../loader/devices.c:501 msgid "The wrong diskette was inserted." msgstr "" #: ../loader/devices.c:513 ../loader/loader.c:453 ../loader/loader.c:455 msgid "Loading" msgstr "" #: ../loader/devices.c:513 ../loader/windows.c:47 #, c-format msgid "Loading %s driver..." msgstr "" #: ../loader/devices.c:532 msgid "Driver Disk" msgstr "" #: ../loader/devices.c:533 #, c-format msgid "Please insert the %s driver disk now." msgstr "" #: ../loader/kickstart.c:58 ../loader/kickstart.c:68 ../loader/kickstart.c:107 msgid "Kickstart Error" msgstr "" #: ../loader/kickstart.c:59 #, c-format msgid "Error opening: kickstart file %s: %s" msgstr "" #: ../loader/kickstart.c:69 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "" #: ../loader/kickstart.c:108 #, c-format msgid "Error on line %d of kickstart file %s." msgstr "" #: ../loader/lang.c:292 msgid "Choose a Language" msgstr "" #: ../loader/lang.c:344 ../loader/loader.c:155 msgid "Welcome to Red Hat Linux" msgstr "" #: ../loader/lang.c:345 ../loader/loader.c:157 msgid "" " / between elements | selects | next screen " msgstr "" #: ../loader/lang.c:583 msgid "Keyboard Type" msgstr "" #: ../loader/lang.c:584 msgid "What type of keyboard do you have?" msgstr "" #: ../loader/loader.c:123 msgid "Local CDROM" msgstr "" #: ../loader/loader.c:126 msgid "NFS image" msgstr "" #: ../loader/loader.c:131 msgid "Hard drive" msgstr "" #: ../loader/loader.c:276 msgid "SCSI" msgstr "" #: ../loader/loader.c:290 msgid "What kind of device would you like to add" msgstr "" #: ../loader/loader.c:339 msgid "I have found the following devices in your system:" msgstr "" #: ../loader/loader.c:341 ../loader/loader.c:366 msgid "Add Device" msgstr "" #: ../loader/loader.c:367 msgid "" "I don't have any special device drivers loaded for your system. Would you " "like to load some now?" msgstr "" #: ../loader/loader.c:510 #, c-format msgid "Loading %s ramdisk..." msgstr "" #: ../loader/loader.c:520 msgid "Error loading ramdisk." msgstr "" #: ../loader/loader.c:585 ../loader/loader.c:2166 #, c-format msgid "Failed to read directory %s: %s" msgstr "" #: ../loader/loader.c:873 msgid "Hard Drives" msgstr "" #: ../loader/loader.c:874 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" #: ../loader/loader.c:888 msgid "" "What partition and directory on that partition hold the CD (iso9660) images " "for Red Hat Linux? If you don't see the disk drive you're using listed here, " "press F2 to configure additional devices." msgstr "" #: ../loader/loader.c:902 msgid "Directory holding images:" msgstr "" #: ../loader/loader.c:922 msgid "Select Partition" msgstr "" #: ../loader/loader.c:970 #, c-format msgid "Device %s does not appear to contain Red Hat CDROM images." msgstr "" #: ../loader/loader.c:1025 msgid "" "I could not find a Red Hat Linux CDROM in any of your CDROM drives. Please " "insert the Red Hat CD and press \"OK\" to retry." msgstr "" #: ../loader/loader.c:1112 msgid "Networking Device" msgstr "" #: ../loader/loader.c:1113 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "" #: ../loader/loader.c:1195 msgid "That directory does not seem to contain a Red Hat installation tree." msgstr "" #: ../loader/loader.c:1200 msgid "I could not mount that directory from the server" msgstr "" #: ../loader/loader.c:1241 ../loader/loader.c:1250 msgid "HTTP" msgstr "" #: ../loader/loader.c:1242 msgid "Unable to retrieve the first install image" msgstr "" #: ../loader/loader.c:1251 msgid "Unable to retrieve the second install image" msgstr "" #: ../loader/loader.c:1281 msgid "FTP and HTTP installs require 20MB or more of system memory." msgstr "" #: ../loader/loader.c:1511 msgid "Rescue Method" msgstr "" #: ../loader/loader.c:1512 msgid "Installation Method" msgstr "" #: ../loader/loader.c:1514 msgid "What type of media contains the rescue image?" msgstr "" #: ../loader/loader.c:1516 msgid "What type of media contains the packages to be installed?" msgstr "" #: ../loader/loader.c:2136 msgid "Cannot find ks.cfg on boot floppy." msgstr "" #: ../loader/loader.c:2228 msgid "Updates Disk" msgstr "" #: ../loader/loader.c:2229 msgid "Insert your updates disk and press \"OK\" to continue." msgstr "" #: ../loader/loader.c:2234 msgid "" "The floppy disk you inserted is not a valid update disk for this release of " "Red Hat Linux." msgstr "" #: ../loader/loader.c:2244 msgid "Failed to mount floppy disk." msgstr "" #. Copy everything to /tmp/updates so .so files don't get run #. from /dev/floppy. We could (and probably should) get smarter #. about this at some point. #: ../loader/loader.c:2249 msgid "Updates" msgstr "" #: ../loader/loader.c:2249 msgid "Reading anaconda updates..." msgstr "" #: ../loader/loader.c:2455 msgid "You don't have enough system memory to install Red Hat on this machine." msgstr "" #: ../loader/loader.c:2917 msgid "Running anaconda - please wait...\n" msgstr "" #: ../loader/net.c:170 msgid "NFS server name:" msgstr "" #: ../loader/net.c:173 ../loader/urls.c:191 msgid "Red Hat directory:" msgstr "" #: ../loader/net.c:179 msgid "NFS Setup" msgstr "" #: ../loader/net.c:180 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your NFS server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecture" msgstr "" #: ../loader/net.c:262 msgid "Nameserver IP" msgstr "" #: ../loader/net.c:266 ../loader/net.c:769 msgid "Nameserver" msgstr "" #: ../loader/net.c:267 msgid "" "Your dynamic IP request returned IP configuration information, but it did " "not include a DNS nameserver. If you know what your nameserver is, please " "enter it now. If you don't have this information, you can leave this field " "blank and the install will continue." msgstr "" #: ../loader/net.c:277 msgid "Invalid IP Information" msgstr "Ongeldige IP Informatie" #: ../loader/net.c:278 msgid "You entered an invalid IP address." msgstr "U heeft een ongeldig IP adres ingevuld." #: ../loader/net.c:301 msgid "" "Please enter the IP configuration for this machine. Each item should be " "entered as an IP address in dotted-decimal notation (for example, 1.2.3.4)." msgstr "" #: ../loader/net.c:343 msgid "Use dynamic IP configuration (BOOTP/DHCP)" msgstr "" #: ../loader/net.c:371 msgid "Configure TCP/IP" msgstr "TCP/IP instellen" #: ../loader/net.c:402 msgid "Missing Information" msgstr "Ontbrekende Informatie" #: ../loader/net.c:403 msgid "You must enter both a valid IP address and a netmask." msgstr "U moet zowel een geldig IP adres als een netmask invullen." #: ../loader/net.c:411 ../loader/net.c:703 msgid "Dynamic IP" msgstr "Dynamisch IP adres" #: ../loader/net.c:412 ../loader/net.c:704 msgid "Sending request for IP information..." msgstr "" #: ../loader/net.c:576 msgid "Determining host name and domain..." msgstr "" #: ../loader/net.c:687 ../loader/net.c:720 msgid "kickstart" msgstr "" #: ../loader/net.c:688 #, c-format msgid "bad argument to kickstart network command %s: %s" msgstr "" #: ../loader/net.c:721 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "" #: ../loader/net.c:763 msgid "Boot protocol to use" msgstr "" #: ../loader/net.c:765 msgid "Network gateway" msgstr "Netwerk gateway" #: ../loader/net.c:767 msgid "IP address" msgstr "IP adres" #: ../loader/net.c:776 msgid "Domain name" msgstr "Domeinnaam" #: ../loader/net.c:779 msgid "Network device" msgstr "" #: ../loader/net.c:851 msgid "" " / between elements | selects | next " "screen" msgstr "" #: ../loader/net.c:852 #, c-format msgid "netconfig %s (C) 1999 Red Hat, Inc." msgstr "netconfig %s (C) 1999 Red Hat, Inc." #: ../loader/net.c:854 msgid "Network configuration" msgstr "Netwerk instellingen" #: ../loader/net.c:855 msgid "Would you like to set up networking?" msgstr "Wilt U uw netwerk instellen?" #: ../loader/pcmcia.c:34 msgid "PC Card" msgstr "PC Card" #: ../loader/pcmcia.c:35 msgid "Initializing PC Card Devices..." msgstr "" #: ../loader/pcmcia.c:104 msgid "PCMCIA" msgstr "PCMCIA" #: ../loader/pcmcia.c:105 msgid "Please insert your PCMCIA driver disk into your floppy drive now." msgstr "" #: ../loader/pcmcia.c:114 msgid "Failed to mount disk." msgstr "" #: ../loader/pcmcia.c:132 msgid "That floppy does not look like a Red Hat PCMCIA driver disk." msgstr "" #: ../loader/urls.c:79 #, c-format msgid "Failed to log into %s: %s" msgstr "" #: ../loader/urls.c:88 ../loader/urls.c:95 #, c-format msgid "Failed to retrieve %s: %s" msgstr "" #: ../loader/urls.c:100 msgid "Retrieving" msgstr "" #: ../loader/urls.c:160 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your FTP server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" #: ../loader/urls.c:169 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your web server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" #: ../loader/urls.c:187 msgid "FTP site name:" msgstr "" #: ../loader/urls.c:188 msgid "Web site name:" msgstr "" #: ../loader/urls.c:206 msgid "Use non-anonymous ftp" msgstr "" #: ../loader/urls.c:211 msgid "Use proxy server" msgstr "" #: ../loader/urls.c:223 msgid "FTP Setup" msgstr "" #: ../loader/urls.c:224 msgid "HTTP Setup" msgstr "" #: ../loader/urls.c:234 msgid "You must enter a server name." msgstr "" #: ../loader/urls.c:239 msgid "You must enter a directory." msgstr "" #: ../loader/urls.c:244 msgid "Unknown Host" msgstr "" #: ../loader/urls.c:245 #, c-format msgid "%s is not a valid hostname." msgstr "" #: ../loader/urls.c:316 msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below." msgstr "" #: ../loader/urls.c:321 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" #: ../loader/urls.c:342 msgid "Account name:" msgstr "" #: ../loader/urls.c:351 msgid "FTP Proxy:" msgstr "" #: ../loader/urls.c:352 msgid "HTTP Proxy:" msgstr "" #: ../loader/urls.c:356 msgid "FTP Proxy Port:" msgstr "" #: ../loader/urls.c:357 msgid "HTTP Proxy Port:" msgstr "" #: ../loader/windows.c:46 msgid "Loading SCSI driver" msgstr "" #: ../gnome-map/gglobe-canvas.c:24 msgid "Map Image to display" msgstr "" #: ../gnome-map/gglobe-canvas.c:25 msgid "Width of map (in pixels)" msgstr "" #: ../gnome-map/gglobe-canvas.c:26 msgid "Enable antialias" msgstr "" #: ../gnome-map/gglobe-canvas.c:100 ../gnome-map/timezonemapmodule.c:70 msgid "World" msgstr "Wereld" #: ../gnome-map/gglobe-canvas.c:101 ../gnome-map/timezonemapmodule.c:71 msgid "North America" msgstr "Noord Amerika" #: ../gnome-map/gglobe-canvas.c:102 ../gnome-map/timezonemapmodule.c:72 msgid "South America" msgstr "Zuid Amerika" #: ../gnome-map/gglobe-canvas.c:103 ../gnome-map/timezonemapmodule.c:73 msgid "Indian Rim" msgstr "" #: ../gnome-map/gglobe-canvas.c:104 ../gnome-map/timezonemapmodule.c:74 msgid "Europe" msgstr "Europa" #: ../gnome-map/gglobe-canvas.c:105 ../gnome-map/timezonemapmodule.c:75 msgid "Africa" msgstr "" #: ../gnome-map/gglobe-canvas.c:106 ../gnome-map/timezonemapmodule.c:76 msgid "Asia" msgstr "" #: ../gnome-map/gglobe-canvas.c:713 ../gnome-map/timezonemapmodule.c:698 msgid "Cannot load timezone data" msgstr "" #: ../gnome-map/gglobe-canvas.c:719 ../gnome-map/timezonemapmodule.c:731 msgid "gglobe-canvas" msgstr "" #: ../gnome-map/gglobe-canvas.c:764 msgid "View: " msgstr "" # ../comps/comps-master:3 msgid "Base" msgstr "Basis" # ../comps/comps-master:157 msgid "Printer Support" msgstr "Printer Ondersteuning" # ../comps/comps-master:188 msgid "X Window System" msgstr "" # ../comps/comps-master:421 msgid "Mail/WWW/News Tools" msgstr "" # ../comps/comps-master:473 msgid "DOS/Windows Connectivity" msgstr "" # ../comps/comps-master:486 msgid "Graphics Manipulation" msgstr "" # ../comps/comps-master:505 msgid "Games" msgstr "Spelletjes" # ../comps/comps-master:533 msgid "Multimedia Support" msgstr "Multimedia Ondersteuning" # ../comps/comps-master:576 msgid "Laptop Support" msgstr "Laptop Ondersteuning" # ../comps/comps-master:582 msgid "Networked Workstation" msgstr "Netwerk Verbinding" # ../comps/comps-master:645 msgid "Dialup Workstation" msgstr "Inbel Verbindingen" # ../comps/comps-master:686 msgid "News Server" msgstr "News Server" # ../comps/comps-master:692 msgid "NFS Server" msgstr "NFS Server" # ../comps/comps-master:698 msgid "SMB (Samba) Server" msgstr "Samba (NT) File Server" # ../comps/comps-master:705 msgid "IPX/Netware(tm) Connectivity" msgstr "Netware(tm) Connectivity" # ../comps/comps-master:712 msgid "Anonymous FTP Server" msgstr "Anoniem toegankelijke FTP Server" # ../comps/comps-master:719 msgid "SQL Server" msgstr "SQL Database Server" # ../comps/comps-master:729 msgid "Web Server" msgstr "Web Server" # ../comps/comps-master:757 msgid "DNS Name Server" msgstr "DNS Name Server" # ../comps/comps-master:771 msgid "Network Management Workstation" msgstr "" # ../comps/comps-master:782 msgid "Authoring/Publishing" msgstr "" # ../comps/comps-master:813 msgid "Emacs" msgstr "Emacs" # ../comps/comps-master:833 msgid "Development" msgstr "Software Ontwikkeling" # ../comps/comps-master:1000 msgid "Kernel Development" msgstr "Kernel Ontwikkeling" # ../comps/comps-master:1006 msgid "Utilities" msgstr "" #. generated from zone.tab msgid "Acre" msgstr "" #. generated from zone.tab msgid "Alagoas, Sergipe" msgstr "" #. generated from zone.tab msgid "Alaska Time" msgstr "" #. generated from zone.tab msgid "Alaska Time - Alaska panhandle" msgstr "" #. generated from zone.tab msgid "Alaska Time - Alaska panhandle neck" msgstr "" #. generated from zone.tab msgid "Alaska Time - west Alaska" msgstr "" #. generated from zone.tab msgid "Aleutian Islands" msgstr "" #. generated from zone.tab msgid "Amapa, E Para" msgstr "" #. generated from zone.tab msgid "Amundsen-Scott Station, South Pole" msgstr "" #. generated from zone.tab msgid "Atlantic islands" msgstr "" #. generated from zone.tab msgid "Atlantic Time - E Labrador" msgstr "" #. generated from zone.tab msgid "" "Atlantic Time - Nova Scotia (most places), NB, W Labrador, E Quebec & PEI" msgstr "" #. generated from zone.tab msgid "Atlantic Time - Nova Scotia - places that did not observe DST 1966-1971" msgstr "" #. generated from zone.tab msgid "Azores" msgstr "" #. generated from zone.tab msgid "Bayan-Olgiy, Hovd, Uvs" msgstr "" #. generated from zone.tab msgid "Borneo & Celebes" msgstr "" #. generated from zone.tab msgid "Canary Islands" msgstr "" #. generated from zone.tab msgid "Casey Station, Bailey Peninsula" msgstr "" #. generated from zone.tab msgid "Catamarca (CT)" msgstr "" #. generated from zone.tab msgid "central Crimea" msgstr "" #. generated from zone.tab msgid "central Kazakhstan" msgstr "" #. generated from zone.tab msgid "Central Standard Time - Saskatchewan - midwest" msgstr "" #. generated from zone.tab msgid "Central Standard Time - Saskatchewan - most locations" msgstr "" #. generated from zone.tab msgid "Central Time" msgstr "" #. generated from zone.tab msgid "Central Time - Campeche, Yucatan" msgstr "" #. generated from zone.tab msgid "Central Time - Coahuila, Durango, Nuevo Leon, Tamaulipas" msgstr "" #. generated from zone.tab msgid "Central Time - Manitoba & west Ontario" msgstr "" #. generated from zone.tab msgid "Central Time - Michigan - Wisconsin border" msgstr "" #. generated from zone.tab msgid "Central Time - most locations" msgstr "" #. generated from zone.tab msgid "Central Time - Quintana Roo" msgstr "" #. generated from zone.tab msgid "Central Time - Rainy River & Fort Frances, Ontario" msgstr "" #. generated from zone.tab msgid "Central Time - west Nunavut" msgstr "" #. generated from zone.tab msgid "Ceuta & Melilla" msgstr "" #. generated from zone.tab msgid "Chatham Islands" msgstr "" #. generated from zone.tab msgid "China coast" msgstr "" #. generated from zone.tab msgid "China mountains" msgstr "" #. generated from zone.tab msgid "Davis Station, Vestfold Hills" msgstr "" #. generated from zone.tab msgid "Dumont-d'Urville Base, Terre Adelie" msgstr "" #. generated from zone.tab msgid "E Amazonas" msgstr "" #. generated from zone.tab msgid "E Argentina (BA, DF, SC, TF)" msgstr "" #. generated from zone.tab msgid "east Dem. Rep. of Congo" msgstr "" #. generated from zone.tab msgid "Easter Island" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - central Nunavut" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - east Nunavut" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - Crawford County" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - most locations" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - Starke County" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - Switzerland County" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Pangnirtung, Nunavut" msgstr "" #. generated from zone.tab msgid "Eastern Time" msgstr "" #. generated from zone.tab msgid "Eastern Time - Kentucky - Louisville area" msgstr "" #. generated from zone.tab msgid "Eastern Time - Kentucky - Wayne County" msgstr "" #. generated from zone.tab msgid "Eastern Time - Michigan - most locations" msgstr "" #. generated from zone.tab msgid "Eastern Time - Ontario & Quebec - most locations" msgstr "" #. generated from zone.tab msgid "" "Eastern Time - Ontario & Quebec - places that did not observe DST 1967-1973" msgstr "" #. generated from zone.tab msgid "Eastern Time - Thunder Bay, Ontario" msgstr "" #. generated from zone.tab msgid "Eastern Turkestan" msgstr "" #. generated from zone.tab msgid "east Greenland" msgstr "" #. generated from zone.tab msgid "east Kazakhstan" msgstr "" #. generated from zone.tab msgid "east Uzbekistan" msgstr "" #. generated from zone.tab msgid "Galapagos Islands" msgstr "" #. generated from zone.tab msgid "Gambier Islands" msgstr "" #. generated from zone.tab msgid "Gilbert Islands" msgstr "" #. generated from zone.tab msgid "Great Britain" msgstr "" #. generated from zone.tab msgid "Hawaii" msgstr "" #. generated from zone.tab msgid "Irian Jaya & the Moluccas" msgstr "" #. generated from zone.tab msgid "Jan Mayen" msgstr "" #. generated from zone.tab msgid "Java & Sumatra" msgstr "" #. generated from zone.tab msgid "Johnston Atoll" msgstr "" #. generated from zone.tab msgid "Jujuy (JY)" msgstr "" #. generated from zone.tab msgid "Kosrae" msgstr "" #. generated from zone.tab msgid "Kwajalein" msgstr "" #. generated from zone.tab msgid "Line Islands" msgstr "" #. generated from zone.tab msgid "Lord Howe Island" msgstr "" #. generated from zone.tab msgid "Madeira Islands" msgstr "" #. generated from zone.tab msgid "Marquesas Islands" msgstr "" #. generated from zone.tab msgid "Mato Grosso, Mato Grosso do Sul" msgstr "" #. generated from zone.tab msgid "Mawson Station, Holme Bay" msgstr "" #. generated from zone.tab msgid "McMurdo Station, Ross Island" msgstr "" #. generated from zone.tab msgid "Mendoza (MZ)" msgstr "" #. generated from zone.tab msgid "Midway Islands" msgstr "" #. generated from zone.tab msgid "Moscow+00 - west Russia" msgstr "" #. generated from zone.tab msgid "Moscow+01 - Caspian Sea" msgstr "" #. generated from zone.tab msgid "Moscow-01 - Kaliningrad" msgstr "" #. generated from zone.tab msgid "Moscow+02 - Urals" msgstr "" #. generated from zone.tab msgid "Moscow+03 - Novosibirsk" msgstr "" #. generated from zone.tab msgid "Moscow+03 - west Siberia" msgstr "" #. generated from zone.tab msgid "Moscow+04 - Yenisei River" msgstr "" #. generated from zone.tab msgid "Moscow+05 - Lake Baikal" msgstr "" #. generated from zone.tab msgid "Moscow+06 - Lena River" msgstr "" #. generated from zone.tab msgid "Moscow+07 - Amur River" msgstr "" #. generated from zone.tab msgid "Moscow+08 - Magadan & Sakhalin" msgstr "" #. generated from zone.tab msgid "Moscow+09 - Kamchatka" msgstr "" #. generated from zone.tab msgid "Moscow+10 - Bering Sea" msgstr "" #. generated from zone.tab msgid "Mountain Standard Time - Arizona" msgstr "" #. generated from zone.tab msgid "" "Mountain Standard Time - Dawson Creek & Fort Saint John, British Columbia" msgstr "" #. generated from zone.tab msgid "Mountain Standard Time - Sonora" msgstr "" #. generated from zone.tab msgid "Mountain Time" msgstr "" #. generated from zone.tab msgid "Mountain Time - Alberta, east British Columbia & west Saskatchewan" msgstr "" #. generated from zone.tab msgid "Mountain Time - central Northwest Territories" msgstr "" #. generated from zone.tab msgid "Mountain Time - Chihuahua" msgstr "" #. generated from zone.tab msgid "Mountain Time - Navajo" msgstr "" #. generated from zone.tab msgid "Mountain Time - S Baja, Nayarit, Sinaloa" msgstr "" #. generated from zone.tab msgid "Mountain Time - south Idaho & east Oregon" msgstr "" #. generated from zone.tab msgid "Mountain Time - west Northwest Territories" msgstr "" #. generated from zone.tab msgid "NE Argentina (SF, ER, CN, MN, CC, FM, LP, CH)" msgstr "" #. generated from zone.tab msgid "NE Brazil (MA, PI, CE, RN, PR)" msgstr "" #. generated from zone.tab msgid "Newfoundland Island" msgstr "" #. generated from zone.tab msgid "New South Wales - most locations" msgstr "" #. generated from zone.tab msgid "New South Wales - Yancowinna" msgstr "" #. generated from zone.tab msgid "northeast Mali" msgstr "" #. generated from zone.tab msgid "Northern Ireland" msgstr "" #. generated from zone.tab msgid "Northern Territory" msgstr "" #. generated from zone.tab msgid "north Manchuria" msgstr "" #. generated from zone.tab msgid "northwest Greenland" msgstr "" #. generated from zone.tab msgid "Pacific Time - north Yukon" msgstr "" #. generated from zone.tab msgid "Pacific Time - south Yukon" msgstr "" #. generated from zone.tab msgid "Pacific Time - west British Columbia" msgstr "" #. generated from zone.tab msgid "Palmer Station, Anvers Island" msgstr "" #. generated from zone.tab msgid "peninsular Malaysia" msgstr "" #. generated from zone.tab msgid "Pernambuco" msgstr "" #. generated from zone.tab msgid "Phoenix Islands" msgstr "" #. generated from zone.tab msgid "Ponape (Pohnpei)" msgstr "" #. generated from zone.tab msgid "Queensland - Holiday Islands" msgstr "" #. generated from zone.tab msgid "Queensland - most locations" msgstr "" #. generated from zone.tab msgid "Roraima" msgstr "" #. generated from zone.tab msgid "Ruthenia" msgstr "" #. generated from zone.tab msgid "Sabah & Sarawak" msgstr "" #. generated from zone.tab msgid "Society Islands" msgstr "" #. generated from zone.tab #, fuzzy msgid "South Australia" msgstr "Zuid Amerika" #. generated from zone.tab msgid "southwest Greenland" msgstr "" #. generated from zone.tab msgid "southwest Mali" msgstr "" #. generated from zone.tab msgid "S & SE Brazil (BA, GO, DF, MG, ES, RJ, SP, PR, SC, RS)" msgstr "" #. generated from zone.tab msgid "Svalbard" msgstr "" #. generated from zone.tab msgid "Syowa Station, E Ongul I" msgstr "" #. generated from zone.tab msgid "Tasmania" msgstr "" #. generated from zone.tab msgid "Tibet & Xinjiang" msgstr "" #. generated from zone.tab #, fuzzy msgid "Tocantins" msgstr "Lokatie" #. generated from zone.tab msgid "Truk (Chuuk)" msgstr "" #. generated from zone.tab msgid "Victoria" msgstr "" #. generated from zone.tab msgid "Vostok Station, S Magnetic Pole" msgstr "" #. generated from zone.tab msgid "Wake Island" msgstr "" #. generated from zone.tab msgid "W Amazonas" msgstr "" #. generated from zone.tab msgid "W Argentina (CB, SA, TM, LR, SJ, SL, NQ, RN)" msgstr "" #. generated from zone.tab msgid "west Dem. Rep. of Congo" msgstr "" #. generated from zone.tab msgid "Western Australia" msgstr "" #. generated from zone.tab msgid "west Kazakhstan" msgstr "" #. generated from zone.tab msgid "west Uzbekistan" msgstr "" #. generated from zone.tab msgid "W Para, Rondonia" msgstr "" #. generated from zone.tab msgid "Yap" msgstr "" #. generated from zone.tab msgid "Zaporozh'ye, E Lugansk" msgstr "" #. generated from lang-table msgid "Czech" msgstr "" #. generated from lang-table #, fuzzy msgid "English" msgstr "Beeindigen" #. generated from lang-table #, fuzzy msgid "Danish" msgstr "Beeindigen" #. generated from lang-table msgid "French" msgstr "" #. generated from lang-table msgid "German" msgstr "" #. generated from lang-table msgid "Hungarian" msgstr "" #. generated from lang-table msgid "Icelandic" msgstr "" #. generated from lang-table msgid "Italian" msgstr "" #. generated from lang-table msgid "Japanese" msgstr "" #. generated from lang-table msgid "Norwegian" msgstr "" #. generated from lang-table msgid "Portuguese" msgstr "" #. generated from lang-table #, fuzzy msgid "Romanian" msgstr "Resterend" #. generated from lang-table msgid "Russian" msgstr "" #. generated from lang-table msgid "Serbian" msgstr "" #. generated from lang-table msgid "Slovak" msgstr "" #. generated from lang-table msgid "Slovenian" msgstr "" #. generated from lang-table #, fuzzy msgid "Spanish" msgstr "Beeindigen" #. generated from lang-table msgid "Swedish" msgstr "" #. generated from lang-table msgid "Turkish" msgstr "" #. generated from lang-table msgid "Ukrainian" msgstr "" #, fuzzy #~ msgid "Going to upgrade partition /dev/" #~ msgstr "RAID Partitie"