# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # Arjan van de Ven , 2001. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2001-07-20 14:05-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Arjan van de Ven \n" "Language-Team: Dutch \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=iso-8859-1\n" "Content-Transfer-Encoding: ENCODING\n" #: ../autopart.py:719 #, c-format msgid "" "Boot partition %s may not meet booting constraints for your architecture. " "Creation of a boot disk is highly encouraged." msgstr "" #: ../autopart.py:830 #, fuzzy msgid "Warnings During Automatic Partitioning" msgstr "Automatisch Partitioneren" #: ../autopart.py:831 #, fuzzy, c-format msgid "" "Following warnings occurred during automatic partitioning:\n" "\n" "%s" msgstr "Automatisch Partitioneren" #: ../autopart.py:837 ../iw/partition_gui.py:1120 #: ../textw/partition_text.py:147 #, fuzzy msgid "Error Partitioning" msgstr "Handmatig Partitioneren" #: ../autopart.py:838 #, fuzzy, c-format msgid "" "Could not allocated requested partitions: \n" "\n" "%s." msgstr "Er zijn niet toegewezen partities..." #: ../autopart.py:869 ../harddrive.py:233 ../iw/bootloader_gui.py:67 #: ../iw/partition_gui.py:1125 ../iw/partition_gui.py:1437 #: ../iw/upgrade_swap_gui.py:169 ../iw/upgrade_swap_gui.py:177 #: ../iw/upgrade_swap_gui.py:184 ../partitioning.py:1090 #: ../textw/bootloader_text.py:128 ../textw/partition_text.py:151 #: ../textw/upgrade_text.py:180 msgid "Warning" msgstr "Waarschuwing" #: ../autopart.py:875 msgid "" "Automatic Partitioning sets up your partitioning based on your installation " "type. You also can customize the resulting partitions to meet your needs.\n" "\n" "The manual disk paritioning tool, Disk Druid, allows you to set up your " "partitions in an interactive environment. You can set the filesystem types, " "mount points, size and more in this easy to use, powerful interface.\n" "\n" "fdisk is the traditional, text-based partitioning tool offered by Red Hat. " "Although it is not as easy to use, there are cases where fdisk is preferred." msgstr "" #: ../autopart.py:891 msgid "" "Before automatic partitioning can be set up by the installation program, you " "must choose how to use the space on hard drives." msgstr "" #: ../autopart.py:896 #, fuzzy msgid "Remove all partitions on this system" msgstr "Linux partities verwijderen" #: ../autopart.py:897 #, fuzzy msgid "Remove all Linux Partitions on this system" msgstr "Linux partities verwijderen" #: ../autopart.py:898 #, fuzzy msgid "Keep all partitions and use existing free space" msgstr "Vrije ruimte gebruiken" #: ../autopart.py:900 #, c-format msgid "" "WARNING!!\tWARNING!!\n" "\n" "You have selected to remove all partitions (ALL DATA) on the following " "drives:%s\n" "Are you sure you want to do this?" msgstr "" #: ../autopart.py:905 #, c-format msgid "" "WARNING!!\tWARNING!!\n" "\n" "You have selected to remove all Linux partitions (and ALL DATA on them) on " "the following drives:%s\n" "Are you sure you want to do this?" msgstr "" #: ../bootloader.py:610 msgid "Bootloader" msgstr "" #: ../bootloader.py:610 #, fuzzy msgid "Installing bootloader..." msgstr "Pakketten Installeren" #: ../comps.py:562 msgid "Everything" msgstr "Alles" #: ../comps.py:672 ../upgrade.py:351 msgid "no suggestion" msgstr "geen suggesties" #: ../exception.py:61 ../text.py:215 msgid "Exception Occurred" msgstr "" #: ../exception.py:128 msgid "Dump Written" msgstr "" #: ../exception.py:129 msgid "" "Your system's state has been successfully written to the floppy. Your system " "will now be reset." msgstr "" #: ../floppy.py:106 msgid "Creating" msgstr "Aanmaken" #: ../floppy.py:106 msgid "Creating boot disk..." msgstr "Boot disk aanmaken" #: ../fsset.py:637 ../iw/silo_gui.py:173 ../textw/silo_text.py:75 msgid "Master Boot Record (MBR)" msgstr "Master Boot Record (MBR)" #: ../fsset.py:638 ../iw/silo_gui.py:176 ../textw/silo_text.py:76 msgid "First sector of boot partition" msgstr "Eerste sector van de opstart partitie" #: ../fsset.py:696 ../fsset.py:715 ../fsset.py:752 ../fsset.py:772 #: ../fsset.py:801 ../fsset.py:821 ../harddrive.py:171 ../image.py:65 #: ../image.py:142 ../libfdisk/newtfsedit.c:1746 ../loader/devices.c:259 #: ../loader/devices.c:266 ../loader/devices.c:435 ../loader/devices.c:480 #: ../loader/devices.c:500 ../loader/lang.c:27 ../loader/lang.c:102 #: ../loader/loader.c:478 ../loader/loader.c:535 ../loader/loader.c:912 #: ../loader/loader.c:967 ../loader/loader.c:1140 ../loader/loader.c:1145 #: ../loader/loader.c:1185 ../loader/loader.c:1244 ../loader/loader.c:2112 #: ../loader/loader.c:2142 ../loader/loader.c:2220 ../loader/loader.c:2432 #: ../loader/pcmcia.c:114 ../loader/pcmcia.c:131 ../loader/urls.c:79 #: ../loader/urls.c:89 ../loader/urls.c:97 ../loader/urls.c:236 #: ../loader/urls.c:241 ../packages.py:236 ../partitioning.py:949 #: ../partitioning.py:980 ../textw/bootdisk_text.py:88 #: ../textw/upgrade_text.py:168 ../textw/upgrade_text.py:175 #: ../textw/upgrade_text.py:197 ../upgrade.py:265 ../upgrade.py:277 msgid "Error" msgstr "Fout" #: ../fsset.py:697 #, fuzzy, c-format msgid "" "An error occurred trying to initialize swap on device %s. This problem is " "serious, and the install cannot continue.\n" "\n" "Press Enter to reboot your system." msgstr "" "Er is een foutsituatie opgretreden bij het mounten van device %s als %s : %" "s \n" "\n" "Dit is waarschijnlijk veroorzaakt doordat deze partitie niet geformateerd " "is.\n" "\n" "Kies OK om uw systeem te herstarten." #: ../fsset.py:716 #, fuzzy, c-format msgid "" "Error enabling swap device %s: %s\n" "\n" "This most likely means this swap partition has not been initialized.\n" "\n" "Press OK to reboot your system." msgstr "" "Er is een foutsituatie opgretreden bij het mounten van device %s als %s : %" "s \n" "\n" "Dit is waarschijnlijk veroorzaakt doordat deze partitie niet geformateerd " "is.\n" "\n" "Kies OK om uw systeem te herstarten." #: ../fsset.py:753 #, fuzzy, c-format msgid "" "An error occurred searching for bad blocks on %s. This problem is serious, " "and the install cannot continue.\n" "\n" "Press Enter to reboot your system." msgstr "" "Er is een foutsituatie opgretreden bij het mounten van device %s als %s : %" "s \n" "\n" "Dit is waarschijnlijk veroorzaakt doordat deze partitie niet geformateerd " "is.\n" "\n" "Kies OK om uw systeem te herstarten." #: ../fsset.py:773 #, c-format msgid "" "An error occurred trying to format %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press Enter to reboot your system." msgstr "" #: ../fsset.py:802 #, c-format msgid "" "An error occurred trying to migrate %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press Enter to reboot your system." msgstr "" #: ../fsset.py:822 #, c-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "This most likely means this partition has not been formatted.\n" "\n" "Press OK to reboot your system." msgstr "" "Er is een foutsituatie opgretreden bij het mounten van device %s als %s : %" "s \n" "\n" "Dit is waarschijnlijk veroorzaakt doordat deze partitie niet geformateerd " "is.\n" "\n" "Kies OK om uw systeem te herstarten." #: ../fsset.py:1299 msgid "Formatting" msgstr "" #: ../fsset.py:1300 #, c-format msgid "Formatting %s filesystem..." msgstr "Formateren van het %s bestandssysteem..." #: ../gui.py:104 ../text.py:272 msgid "Fix" msgstr "" #: ../gui.py:105 ../iw/partition_gui.py:533 ../iw/partition_gui.py:596 #: ../iw/welcome_gui.py:101 ../libfdisk/fsedit.c:953 #: ../libfdisk/gnomefsedit.c:829 ../libfdisk/gnomefsedit.c:1237 #: ../libfdisk/gnomefsedit.c:1376 ../libfdisk/gnomefsedit.c:1398 #: ../libfdisk/gnomefsedit.c:2467 ../libfdisk/gnomefsedit.c:2754 #: ../libfdisk/gnomefsedit.c:2809 ../libfdisk/newtfsedit.c:618 #: ../libfdisk/newtfsedit.c:745 ../libfdisk/newtfsedit.c:877 #: ../libfdisk/newtfsedit.c:1683 ../libfdisk/newtfsedit.c:1701 #: ../libfdisk/newtfsedit.c:1788 ../loader/devices.c:230 #: ../loader/loader.c:816 ../loader/net.c:889 ../text.py:273 #: ../textw/bootdisk_text.py:25 ../textw/bootloader_text.py:76 #: ../textw/constants_text.py:32 ../textw/upgrade_text.py:259 msgid "Yes" msgstr "Ja" #: ../gui.py:106 ../iw/partition_gui.py:535 ../iw/partition_gui.py:598 #: ../iw/welcome_gui.py:104 ../libfdisk/fsedit.c:953 #: ../libfdisk/gnomefsedit.c:829 ../libfdisk/gnomefsedit.c:1237 #: ../libfdisk/gnomefsedit.c:1376 ../libfdisk/gnomefsedit.c:1398 #: ../libfdisk/gnomefsedit.c:2467 ../libfdisk/gnomefsedit.c:2754 #: ../libfdisk/gnomefsedit.c:2809 ../libfdisk/newtfsedit.c:618 #: ../libfdisk/newtfsedit.c:745 ../libfdisk/newtfsedit.c:877 #: ../libfdisk/newtfsedit.c:1683 ../libfdisk/newtfsedit.c:1701 #: ../libfdisk/newtfsedit.c:1788 ../loader/devices.c:231 ../loader/net.c:889 #: ../text.py:274 ../textw/bootdisk_text.py:25 ../textw/bootdisk_text.py:54 #: ../textw/bootloader_text.py:76 ../textw/constants_text.py:36 #: ../textw/upgrade_text.py:259 ../textw/upgrade_text.py:266 msgid "No" msgstr "Nee" #. code to create dialog in gtk+ #: ../gui.py:107 ../libfdisk/fsedit.c:922 ../libfdisk/fsedit.c:929 #: ../libfdisk/fsedit.c:936 ../libfdisk/fsedit.c:945 ../libfdisk/fsedit.c:972 #: ../libfdisk/fsedit.c:985 ../libfdisk/fsedit.c:995 ../libfdisk/fsedit.c:1024 #: ../libfdisk/fsedit.c:1034 ../libfdisk/fsedit.c:1052 #: ../libfdisk/fsedit.c:1476 ../libfdisk/gnomefsedit.c:756 #: ../libfdisk/gnomefsedit.c:788 ../libfdisk/gnomefsedit.c:879 #: ../libfdisk/gnomefsedit.c:914 ../libfdisk/gnomefsedit.c:1262 #: ../libfdisk/gnomefsedit.c:1299 ../libfdisk/gnomefsedit.c:1333 #: ../libfdisk/gnomefsedit.c:1352 ../libfdisk/gnomefsedit.c:1526 #: ../libfdisk/gnomefsedit.c:1601 ../libfdisk/gnomefsedit.c:1651 #: ../libfdisk/gnomefsedit.c:1719 ../libfdisk/gnomefsedit.c:1737 #: ../libfdisk/gnomefsedit.c:2015 ../libfdisk/gnomefsedit.c:2024 #: ../libfdisk/gnomefsedit.c:2270 ../libfdisk/gnomefsedit.c:2278 #: ../libfdisk/gnomefsedit.c:2322 ../libfdisk/gnomefsedit.c:2332 #: ../libfdisk/gnomefsedit.c:2339 ../libfdisk/gnomefsedit.c:2354 #: ../libfdisk/gnomefsedit.c:2364 ../libfdisk/gnomefsedit.c:2374 #: ../libfdisk/gnomefsedit.c:2413 ../libfdisk/gnomefsedit.c:2544 #: ../libfdisk/gnomefsedit.c:2586 ../libfdisk/newtfsedit.c:170 #: ../libfdisk/newtfsedit.c:347 ../libfdisk/newtfsedit.c:580 #: ../libfdisk/newtfsedit.c:642 ../libfdisk/newtfsedit.c:675 #: ../libfdisk/newtfsedit.c:701 ../libfdisk/newtfsedit.c:720 #: ../libfdisk/newtfsedit.c:851 ../libfdisk/newtfsedit.c:1480 #: ../libfdisk/newtfsedit.c:1488 ../libfdisk/newtfsedit.c:1613 #: ../libfdisk/newtfsedit.c:1634 ../libfdisk/newtfsedit.c:1662 #: ../libfdisk/newtfsedit.c:1746 ../loader/cdrom.c:34 ../loader/devices.c:92 #: ../loader/devices.c:237 ../loader/devices.c:259 ../loader/devices.c:266 #: ../loader/devices.c:335 ../loader/devices.c:435 ../loader/devices.c:480 #: ../loader/devices.c:500 ../loader/devices.c:532 ../loader/kickstart.c:58 #: ../loader/kickstart.c:68 ../loader/kickstart.c:107 ../loader/lang.c:27 #: ../loader/lang.c:102 ../loader/lang.c:300 ../loader/lang.c:596 #: ../loader/loader.c:323 ../loader/loader.c:478 ../loader/loader.c:535 #: ../loader/loader.c:853 ../loader/loader.c:912 ../loader/loader.c:967 #: ../loader/loader.c:1061 ../loader/loader.c:1140 ../loader/loader.c:1145 #: ../loader/loader.c:1185 ../loader/loader.c:1213 ../loader/loader.c:1244 #: ../loader/loader.c:1490 ../loader/loader.c:2112 ../loader/loader.c:2142 #: ../loader/loader.c:2205 ../loader/loader.c:2220 ../loader/loader.c:2432 #: ../loader/net.c:185 ../loader/net.c:272 ../loader/net.c:359 #: ../loader/net.c:722 ../loader/net.c:755 ../loader/pcmcia.c:104 #: ../loader/pcmcia.c:114 ../loader/pcmcia.c:131 ../loader/urls.c:158 #: ../loader/urls.c:236 ../loader/urls.c:241 ../loader/urls.c:387 #: ../text.py:275 ../textw/fdisk_text.py:40 ../textw/silo_text.py:147 #: ../textw/silo_text.py:160 msgid "Ok" msgstr "Ok" #: ../gui.py:108 ../libfdisk/fsedit.c:1385 ../libfdisk/fsedit.c:1463 #: ../loader/net.c:277 ../loader/net.c:404 ../text.py:276 msgid "Retry" msgstr "" #: ../gui.py:109 ../text.py:277 msgid "Ignore" msgstr "" #: ../gui.py:110 ../iw/account_gui.py:150 ../iw/account_gui.py:161 #: ../iw/partition_gui.py:717 ../iw/partition_gui.py:1170 #: ../libfdisk/gnomefsedit.c:914 ../libfdisk/gnomefsedit.c:2024 #: ../libfdisk/gnomefsedit.c:2586 ../libfdisk/newtfsedit.c:581 #: ../libfdisk/newtfsedit.c:1701 ../loader/devices.c:238 #: ../loader/devices.c:532 ../loader/loader.c:2205 ../loader/pcmcia.c:104 #: ../text.py:114 ../text.py:115 ../text.py:246 ../text.py:248 ../text.py:278 #: ../textw/bootloader_text.py:197 ../textw/constants_text.py:24 #: ../textw/silo_text.py:147 ../textw/silo_text.py:165 #: ../textw/userauth_text.py:75 ../textw/welcome_text.py:48 #: ../textw/welcome_text.py:51 msgid "Cancel" msgstr "Afbreken" #: ../gui.py:192 ../text.py:254 #, fuzzy msgid "" "An unhandled exception has occured. This is most likely a bug. Please copy " "the full text of this exception or save the crash dump to a floppy then file " "a detailed bug report against anaconda at http://bugzilla.redhat.com/" "bugzilla/" msgstr "" "Er is iets vreemds gebeurt. Dit is waarschijnlijk een fout. Wij verzoeken U " "om de volledige 'exception' tekst te kopieren een de fout te rapporteren op " "http://bugzilla.redhat.com/bugzilla" #: ../gui.py:313 ../text.py:244 msgid "" "Please insert a floppy now. All contents of the disk will be erased, so " "please choose your diskette carefully." msgstr "" #: ../gui.py:376 ../gui.py:739 msgid "Online Help" msgstr "Online helptekst" #: ../gui.py:377 ../iw/language_gui.py:7 ../textw/language_text.py:43 msgid "Language Selection" msgstr "Taalkeuze" #: ../gui.py:435 ../iw/firewall_gui.py:122 ../libfdisk/gnomefsedit.c:1388 #: ../libfdisk/gnomefsedit.c:1405 msgid "Close" msgstr "Sluiten" #: ../gui.py:440 ../gui.py:602 msgid "Release Notes" msgstr "" #: ../gui.py:471 msgid "Unable to load file!" msgstr "" #: ../gui.py:492 msgid "Release notes are missing.\n" msgstr "" #: ../gui.py:598 ../libfdisk/newtfsedit.c:1480 ../libfdisk/newtfsedit.c:1488 #: ../loader/cdrom.c:34 ../loader/devices.c:93 ../loader/devices.c:238 #: ../loader/devices.c:335 ../loader/lang.c:596 ../loader/loader.c:323 #: ../loader/loader.c:816 ../loader/loader.c:853 ../loader/loader.c:967 #: ../loader/loader.c:1061 ../loader/loader.c:1490 ../loader/net.c:185 #: ../loader/net.c:272 ../loader/net.c:359 ../loader/urls.c:158 #: ../loader/urls.c:387 ../rescue.py:129 ../textw/confirm_text.py:24 #: ../textw/confirm_text.py:26 ../textw/confirm_text.py:36 #: ../textw/confirm_text.py:38 ../textw/constants_text.py:28 #: ../textw/silo_text.py:110 ../textw/userauth_text.py:177 msgid "Back" msgstr "Terug" #: ../gui.py:600 msgid "Next" msgstr "Volgende" #: ../gui.py:604 msgid "Show Help" msgstr "Hulptekst weergeven" #: ../gui.py:606 msgid "Hide Help" msgstr "Hulptekst verbergen" #: ../gui.py:648 msgid "Red Hat Linux Installer" msgstr "Red Hat Linux Installatieprogramma" #: ../gui.py:663 #, c-format msgid "Red Hat Linux Installer on %s" msgstr "Red Hat Linux Installer op %s" #: ../gui.py:702 msgid "Unable to load title bar" msgstr "" #: ../gui.py:787 msgid "Install Window" msgstr "Installatie Venster" #: ../harddrive.py:172 #, c-format msgid "Missing CD #%d, which is required for the install." msgstr "CD #%d ontbreekt. Deze CD is nodig voor de installatie" #: ../image.py:62 msgid "Copying File" msgstr "Kopieren van bestand" #: ../image.py:63 msgid "Transferring install image to hard drive..." msgstr "Overzetten van de installatie-bestanden naar de harddisk" #: ../image.py:66 msgid "" "An error occured transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" "Er is een fout opgetreden tijdens het overzetten van de installatie-" "bestanden.Waarschijnlijk is uw harddisk vol." #: ../image.py:119 msgid "Change CDROM" msgstr "Wissel de CDROM" #: ../image.py:120 #, c-format msgid "Please insert disc %d to continue." msgstr "" #: ../image.py:137 msgid "Wrong CDROM" msgstr "Verkeerde CDROM" #: ../image.py:138 msgid "That's not the correct Red Hat CDROM." msgstr "Dat is niet de juiste Red Hat Linux CDROM" #: ../image.py:143 msgid "The CDROM could not be mounted." msgstr "De CDROM kon niet gemount worden." #: ../installclass.py:27 msgid "Install" msgstr "" #: ../monitor.py:152 ../mouse.py:184 ../videocard.py:129 msgid "Unable to probe" msgstr "" #: ../iw/package_gui.py:17 ../packages.py:37 msgid "Proceed with upgrade?" msgstr "" #: ../iw/package_gui.py:18 ../packages.py:38 msgid "" "The filesystems of the Linux installation you have chosen to upgrade have " "already been mounted. You cannot go back past this point. \n" "\n" msgstr "" #: ../iw/package_gui.py:22 ../packages.py:42 #, fuzzy msgid "Would you like to continue with the upgrade?" msgstr "Wilt U uw systeem instellen ?" #: ../packages.py:95 msgid "Reading" msgstr "Lezen" #: ../packages.py:95 msgid "Reading package information..." msgstr "" #: ../packages.py:152 msgid "Dependency Check" msgstr "Afhankelijkheden controle" #: ../packages.py:153 msgid "Checking dependencies in packages selected for installation..." msgstr "" #: ../packages.py:202 ../packages.py:461 msgid "Processing" msgstr "" #: ../packages.py:203 msgid "Preparing to install..." msgstr "Installatie voorbereiden..." #: ../packages.py:237 #, c-format msgid "" "The file %s cannot be opened. This is due to a missing file, a bad package, " "or bad media. Press to try again." msgstr "" #: ../packages.py:462 msgid "Setting up RPM transaction..." msgstr "" #: ../packages.py:498 #, c-format msgid "Upgrading %s.\n" msgstr "" #: ../packages.py:500 #, c-format msgid "Installing %s.\n" msgstr "" #: ../packages.py:551 msgid "" "You don't appear to have enough disk space to install the packages you've " "selected. You need more space on the following filesystems:\n" "\n" msgstr "" #: ../iw/partition_gui.py:1373 ../iw/upgrade_swap_gui.py:121 #: ../libfdisk/gnomefsedit.c:3132 ../packages.py:555 ../packages.py:575 #: ../textw/upgrade_text.py:114 msgid "Mount Point" msgstr "" #: ../packages.py:556 msgid "Space Needed" msgstr "Benodigde schijfruimte" #: ../packages.py:571 msgid "" "You don't appear to have enough file nodes to install the packages you've " "selected. You need more file nodes on the following filesystems:\n" "\n" msgstr "" #: ../packages.py:576 msgid "Nodes Needed" msgstr "" #: ../packages.py:582 msgid "Disk Space" msgstr "Schijfruimte" #: ../packages.py:621 msgid "Post Install" msgstr "" #: ../packages.py:622 msgid "Performing post install configuration..." msgstr "" #: ../partitioning.py:165 msgid "Foreign" msgstr "" #: ../partitioning.py:326 msgid "" "The mount point is invalid. Mount points must start with '/' and cannot end " "with '/', and must contain printable characters." msgstr "" #: ../partitioning.py:333 msgid "Please specify a mount point for this partition." msgstr "" #: ../partitioning.py:352 #, c-format msgid "" "The mount point %s is already in use, please choose a different mount point." msgstr "" #: ../partitioning.py:391 msgid "" "This mount point is invalid. This directory must be on the / filesystem." msgstr "" #: ../partitioning.py:396 msgid "This mount point must be on a linux filesystem." msgstr "" #: ../partitioning.py:406 #, c-format msgid "" "The size of the %s partition (size = %s MB) exceeds the maximum size of %s " "MB." msgstr "" #: ../partitioning.py:413 #, c-format msgid "" "The size of the requested partition (size = %s MB) exceeds the maximum size " "of %s MB." msgstr "" #: ../partitioning.py:418 #, c-format msgid "The size of the requested partition is negative! (size = %s MB)" msgstr "" #: ../partitioning.py:422 msgid "Partitions can't start below the first cylinder." msgstr "" #: ../partitioning.py:425 msgid "Partitions can't end on a negative cylinder." msgstr "" #: ../partitioning.py:458 msgid "No members in RAID request, or not RAID level specified." msgstr "" #: ../partitioning.py:475 msgid "Bootable partitions can only be on RAID1 devices." msgstr "" #: ../partitioning.py:479 #, c-format msgid "A RAID device of type %s requires at least %s members." msgstr "" #: ../partitioning.py:485 #, c-format msgid "" "This RAID device can have a maximum of %s spares. To have more spares you " "will need to add members to the RAID device." msgstr "" #: ../partitioning.py:503 msgid "" "You have not defined a root partition (/), which is required for " "installation of Red Hat Linux to continue." msgstr "" #: ../partitioning.py:506 msgid "" "Your root partition is less than 250 megabytes which is usually too small to " "install Red Hat Linux." msgstr "" #: ../partitioning.py:511 #, c-format msgid "" "Your %s partition is less than %s megabytes which is lower than recommended " "for a normal Red Hat Linux install." msgstr "" #: ../partitioning.py:522 msgid "" "You have not specified a swap partition. Although not strictly required in " "all cases, it will significantly improve performance for most installations." msgstr "" #: ../partitioning.py:526 msgid "" "You have specified more than 32 swap devices. The kernel for Red Hat Linux " "only supports 32 swap devices." msgstr "" #: ../partitioning.py:535 #, c-format msgid "" "You have allocated less swap space (%dM) than available RAM (%dM) on your " "system. This could negatively impact performance." msgstr "" #: ../partitioning.py:950 ../partitioning.py:981 #, fuzzy, c-format msgid "Error mounting filesystem on %s: %s" msgstr "Fout tijdens het unmounten van %s: %s" #: ../partitioning.py:1091 #, c-format msgid "" "The partition table on device %s was unreadable. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive.\n" "\n" "Would you like to initialize this drive?" msgstr "" #: ../libfdisk/fsedit.c:1052 ../partitioning.py:1168 msgid "No Drives Found" msgstr "" #: ../partitioning.py:1169 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem." msgstr "" #: ../partitioning.py:1242 msgid "" "You are about to delete a RAID device.\n" "\n" "Are you sure?" msgstr "" #: ../partitioning.py:1245 #, c-format msgid "" "You are about to delete the /dev/%s partition.\n" "\n" "Are you sure?" msgstr "" #: ../libfdisk/gnomefsedit.c:830 ../libfdisk/newtfsedit.c:878 #: ../partitioning.py:1249 msgid "Are you sure you want to delete this partition?" msgstr "" #: ../partitioning.py:1251 #, fuzzy msgid "Confirm Delete" msgstr "Bevestig: " #: ../partitioning.py:1255 #, fuzzy msgid "Confirm Reset" msgstr "Bevestig: " #: ../partitioning.py:1256 #, fuzzy msgid "" "Are you sure you want to reset the partition table to its original state?" msgstr "De partitie tabel terugzetten naar de oorspronkelijke inhoud? " #: ../partitioning.py:1280 msgid "the partition in use by the installer." msgstr "" #: ../partitioning.py:1283 msgid "a partition which is a member of a RAID array." msgstr "" #: ../partitioning.py:1292 ../partitioning.py:1298 ../partitioning.py:1306 #: ../partitioning.py:1317 ../partitioning.py:1324 msgid "Unable To Remove" msgstr "" #: ../partitioning.py:1293 #, fuzzy msgid "You must first select a partition to remove." msgstr "Eerste sector van de opstart partitie" #: ../partitioning.py:1299 msgid "You cannot remove free space." msgstr "" #: ../partitioning.py:1307 #, c-format msgid "" "You cannot remove this partition, as it is an extended partition which " "contains %s" msgstr "" #: ../partitioning.py:1318 msgid "" "You cannot remove this partition, as it is holding the data for the hard " "drive install." msgstr "" #: ../partitioning.py:1325 msgid "You cannot remove this partition, as it is part of a RAID device." msgstr "" #: ../partitioning.py:1353 ../partitioning.py:1375 msgid "Unable To Edit" msgstr "" #: ../partitioning.py:1354 #, fuzzy msgid "You must select a partition to edit" msgstr "U moet tenminste 1 taal kiezen" #: ../partitioning.py:1376 #, c-format msgid "" "You cannot edit this partition, as it is an extended partition which " "contains %s" msgstr "" #: ../partitioning.py:1384 ../partitioning.py:1389 msgid "Unable to Edit" msgstr "" #: ../partitioning.py:1385 msgid "You cannot edit this partition, as it is in use by the installer." msgstr "" #: ../partitioning.py:1390 msgid "You cannot edit this partition as it is part of a RAID device" msgstr "" #: ../partitioning.py:1402 #, fuzzy msgid "Installation cannot continue." msgstr "Installatie Voltooid" #: ../partitioning.py:1403 msgid "" "The partitioning options you have chosen have already been activated. You " "can no longer return to the disk editing screen. Would you like to continue " "with the installation process?" msgstr "" #: ../partitioning.py:1423 msgid "Low Memory" msgstr "" #: ../partitioning.py:1424 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that okay?" msgstr "" #: ../partitioning.py:1436 ../partitioning.py:1445 msgid "Format?" msgstr "" #: ../partitioning.py:1437 msgid "" "You have chosen to format a pre-existing partition. This will destroy all " "data that was previously on it.\n" "\n" "Are you sure you want to do this?" msgstr "" #: ../partitioning.py:1446 msgid "" "You have chosen not to format a pre-existing partition which is being " "mounted as a system directory. It is highly recommended you format this " "partition to guarantee the data formerly on the partition does not corrupt " "your new installation.\n" "\n" "Are you sure you want to do this?" msgstr "" #: ../iw/account_gui.py:149 ../iw/account_gui.py:160 #: ../iw/partition_gui.py:716 ../iw/partition_gui.py:1169 ../loader/urls.c:79 #: ../loader/urls.c:89 ../loader/urls.c:97 ../loader/urls.c:247 #: ../rescue.py:34 ../rescue.py:85 ../rescue.py:106 ../rescue.py:123 #: ../text.py:384 ../textw/bootdisk_text.py:65 ../textw/bootdisk_text.py:67 #: ../textw/complete_text.py:41 ../textw/complete_text.py:56 #: ../textw/complete_text.py:72 ../textw/confirm_text.py:24 #: ../textw/confirm_text.py:36 ../textw/constants_text.py:20 #: ../textw/firewall_text.py:201 ../textw/network_text.py:134 #: ../textw/silo_text.py:110 ../xserver.py:51 msgid "OK" msgstr "OK" #: ../rescue.py:82 msgid "System to Rescue" msgstr "Systeem om the herstellen" #: ../rescue.py:83 ../textw/upgrade_text.py:216 msgid "What partition holds the root partition of your installation?" msgstr "Welke partitie bevat de bron partitie van Uw installatie?" #: ../iw/congrats_gui.py:14 ../iw/congrats_gui.py:66 ../rescue.py:85 #: ../rescue.py:89 msgid "Exit" msgstr "Einde" #: ../rescue.py:100 ../rescue.py:118 msgid "Rescue" msgstr "" #: ../rescue.py:101 #, fuzzy msgid "" "Your system has been mounted under /mnt/sysimage.\n" "\n" "Press to get a shell. If you would like to make your system the " "root environment, run the command:\n" "\n" "\tchroot /mnt/sysimage\n" "\n" "The system will reboot automatically when you exit from the shell." msgstr "" "Uw systeem is gemount als /mnt/sysimage.\n" "\n" "Typ om een shellprompt te krijgen. Het systeem zal automatisch " "herstarten als u de shell verlaat." #: ../rescue.py:119 msgid "" "An error occured trying to mount some or all of your system. Some of it may " "be mounted under /mnt/sysimage.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" "Een fout is opgetreden tijdens het mounten van (een deel van) uw systeem.Een " "deel kan gemount zijn als /mnt/sysimage.\n" "\n" "Typ om een shellprompt te krijgen. Het systeem zal automatisch " "herstarten als U de shell verlaat." #: ../rescue.py:125 msgid "Rescue Mode" msgstr "Herstel Mode" #: ../rescue.py:126 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" "U heeft geen Linux partities. Typ om een shellprompt te krijgen.Het " "systeem zal automatisch herstarten als u de shell verlaat." #: ../rescue.py:135 msgid "Your system is mounted under the /mnt/sysimage directory." msgstr "Uw systeem is gemount als de /mnt/sysimage directory" #: ../text.py:173 msgid "Help not available" msgstr "Hulptekst niet beschikbaar" #: ../text.py:174 msgid "No help is available for this install." msgstr "Voor deze installatie is geen hulptekst beschikbaar" #: ../text.py:243 msgid "Save Crash Dump" msgstr "" #: ../text.py:262 ../text.py:265 msgid "Save" msgstr "Bewaren" #: ../text.py:262 ../text.py:263 msgid "Debug" msgstr "Foutzoeken" #: ../text.py:293 msgid "Red Hat Linux (C) 2001 Red Hat, Inc." msgstr "Red Hat Linux (C) 2001 Red Hat, Inc." #: ../text.py:296 msgid "" " for help | between elements | selects | next screen" msgstr "" " hulp | volgende regel | selecteren | volgend scherm" #: ../text.py:298 msgid "" " / between elements | selects | next " "screen" msgstr "" #: ../text.py:380 msgid "Cancelled" msgstr "Afgebroken" #: ../text.py:381 msgid "I can't go to the previous step from here. You will have to try again." msgstr "" "Het is niet mogelijk om naar de vorige stap terug te gaan. Probeer opniew." #: ../upgrade.py:36 msgid "Searching" msgstr "" #: ../upgrade.py:37 msgid "Searching for Red Hat Linux installations..." msgstr "" #: ../upgrade.py:70 ../upgrade.py:202 #, fuzzy msgid "Dirty Filesystems" msgstr "Root Bestandssysteem Grootte" #: ../upgrade.py:71 msgid "" "One or more of the filesystems for your Linux system was not unmounted " "cleanly. Please boot your Linux installation, let the filesystems be " "checked, and shut down cleanly to upgrade." msgstr "" #: ../upgrade.py:203 msgid "" "One or more of the filesystems listed in the /etc/fstab on your Linux system " "cannot be mounted. Please fix this problem and try to upgrade again." msgstr "" #: ../upgrade.py:218 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" #: ../upgrade.py:242 msgid "Finding" msgstr "" #: ../upgrade.py:243 msgid "Finding packages to upgrade..." msgstr "" #: ../upgrade.py:266 msgid "Rebuild of RPM database failed. You may be out of disk space?" msgstr "" #: ../upgrade.py:278 msgid "An error occured when finding the packages to upgrade." msgstr "" #: ../videocard.py:389 #, fuzzy msgid "Unknown Card" msgstr "Onbekend" #: ../iw/xconfig_gui.py:15 ../textw/xconfig_text.py:469 ../xf86config.py:850 msgid "Video Card" msgstr "Video Kaart" #: ../iw/xconfig_gui.py:17 ../xf86config.py:852 msgid "Video Ram" msgstr "" #: ../xf86config.py:855 msgid "X server" msgstr "" #: ../xf86config.py:858 msgid "Unable to detect video card" msgstr "" #: ../xserver.py:44 msgid "Mouse Not Detected" msgstr "Muis niet gevonden" #: ../xserver.py:45 msgid "" "Your mouse was not automatically detected. To proceed in the graphical " "installation mode, please proceed to the next screen and provide your mouse " "information. You may also use text mode installation which does not require " "a mouse." msgstr "" #: ../xserver.py:51 ../xserver.py:52 msgid "Use text mode" msgstr "" #: ../xserver.py:101 msgid "Attempting to start framebuffer based X server" msgstr "" #: ../xserver.py:109 msgid "Attempting to start native X server" msgstr "" #: ../xserver.py:117 msgid "Attempting to start VGA16 X server" msgstr "" #: ../xserver.py:176 msgid "Waiting for X server to start...log located in /tmp/X.log\n" msgstr "" #: ../xserver.py:203 msgid " X server started successfully." msgstr "" #: ../iw/account_gui.py:25 msgid "Account Configuration" msgstr "" #: ../iw/account_gui.py:48 msgid "Root password accepted." msgstr "root-wachtwoord geaccepteerd" #: ../iw/account_gui.py:53 msgid "Root password is too short." msgstr "Het root-wachtwoord is te kort" #: ../iw/account_gui.py:55 msgid "Root passwords do not match." msgstr "De root-wachtwoorden komen niet overeen." #: ../iw/account_gui.py:67 msgid "User password accepted." msgstr "Wachtwoord geaccepteerd" #: ../iw/account_gui.py:74 msgid "Root account can not be added here." msgstr "" #: ../iw/account_gui.py:76 msgid "Please enter user password." msgstr "" #: ../iw/account_gui.py:78 msgid "User password is too short." msgstr "Wachtwoord is te kort." #: ../iw/account_gui.py:80 msgid "User passwords do not match." msgstr "Wachtwoorden komen niet overeen." #: ../iw/account_gui.py:147 #, fuzzy msgid "Add a New User" msgstr "Gebruiker toevoegen" #: ../iw/account_gui.py:157 ../textw/userauth_text.py:84 msgid "Edit User" msgstr "Gebruiker wijzigen" #: ../iw/account_gui.py:182 #, fuzzy msgid "User Name:" msgstr "Gebruikersnaam" #: ../iw/account_gui.py:184 #, fuzzy msgid "Full Name:" msgstr "Volledige Naam" #: ../iw/account_gui.py:186 ../iw/bootloaderpassword_gui.py:72 #: ../loader/urls.c:357 ../textw/userauth_text.py:36 msgid "Password:" msgstr "Wachtwoord:" #: ../iw/account_gui.py:188 ../iw/bootloaderpassword_gui.py:76 #: ../textw/bootloader_text.py:385 #, fuzzy msgid "Confirm:" msgstr "Bevestig: " #: ../iw/account_gui.py:191 #, fuzzy msgid "Please enter user name" msgstr "Voer het root-wachtwoord in." #: ../iw/account_gui.py:272 msgid "Enter the password for the root user (administrator) of this system." msgstr "" #: ../iw/account_gui.py:285 msgid "Root Password: " msgstr "Root Wachtwoord:" #: ../iw/account_gui.py:288 msgid "Confirm: " msgstr "Bevestig: " #: ../iw/account_gui.py:322 msgid "Account Name" msgstr "" #: ../iw/account_gui.py:322 ../textw/userauth_text.py:95 #: ../textw/userauth_text.py:196 msgid "Full Name" msgstr "Volledige Naam" #: ../iw/account_gui.py:329 ../libfdisk/newtfsedit.c:1486 #: ../textw/userauth_text.py:210 msgid "Add" msgstr "Toevoegen" #: ../iw/account_gui.py:331 ../libfdisk/newtfsedit.c:1479 #: ../libfdisk/newtfsedit.c:1487 ../textw/bootloader_text.py:274 #: ../textw/fdisk_text.py:40 ../textw/partition_text.py:903 #: ../textw/silo_text.py:216 ../textw/silo_text.py:238 #: ../textw/userauth_text.py:211 msgid "Edit" msgstr "Wijzigen" #: ../iw/account_gui.py:334 ../libfdisk/newtfsedit.c:1487 #: ../textw/userauth_text.py:210 msgid "Delete" msgstr "Verwijderen" #: ../iw/account_gui.py:356 msgid "" "Additional accounts can be created for other users of this system. Such " "accounts could be for a personal login account, or for other non-" "administrative users who need to use this system. Use the button to " "enter additional user accounts." msgstr "" #: ../iw/auth_gui.py:21 ../textw/userauth_text.py:311 msgid "Authentication Configuration" msgstr "" #: ../iw/auth_gui.py:97 msgid "Enable MD5 passwords" msgstr "" #: ../iw/auth_gui.py:98 msgid "Enable shadow passwords" msgstr "" #: ../iw/auth_gui.py:101 ../textw/userauth_text.py:320 msgid "Enable NIS" msgstr "" #: ../iw/auth_gui.py:102 msgid "Use broadcast to find NIS server" msgstr "" #: ../iw/auth_gui.py:114 msgid "NIS Domain: " msgstr "" #: ../iw/auth_gui.py:116 msgid "NIS Server: " msgstr "" #: ../iw/auth_gui.py:139 ../textw/userauth_text.py:354 msgid "Enable LDAP" msgstr "" #: ../iw/auth_gui.py:142 msgid "Use TLS lookups" msgstr "" #: ../iw/auth_gui.py:143 ../textw/userauth_text.py:360 msgid "LDAP Server:" msgstr "" #: ../iw/auth_gui.py:145 ../textw/userauth_text.py:362 msgid "LDAP Base DN:" msgstr "" #: ../iw/auth_gui.py:172 ../textw/userauth_text.py:383 msgid "Enable Kerberos" msgstr "" #: ../iw/auth_gui.py:176 ../textw/userauth_text.py:390 msgid "Realm:" msgstr "" #: ../iw/auth_gui.py:178 ../textw/userauth_text.py:392 msgid "KDC:" msgstr "" #: ../iw/auth_gui.py:180 ../textw/userauth_text.py:394 msgid "Admin Server:" msgstr "" #: ../iw/auth_gui.py:208 msgid "Enable SMB Authentication" msgstr "" # ../comps/comps-master:698 #: ../iw/auth_gui.py:211 #, fuzzy msgid "SMB Server:" msgstr "Samba (NT) File Server" #: ../iw/auth_gui.py:213 msgid "SMB Workgroup:" msgstr "" #: ../iw/auth_gui.py:240 msgid "NIS" msgstr "" #: ../iw/auth_gui.py:241 msgid "LDAP" msgstr "" #: ../iw/auth_gui.py:242 msgid "Kerberos 5" msgstr "" #: ../iw/auth_gui.py:243 msgid "SMB" msgstr "" #: ../iw/bootdisk_gui.py:23 #, fuzzy msgid "Boot Disk Creation" msgstr "Opstartfloppy Aanmaken" #: ../iw/bootdisk_gui.py:57 ../textw/bootdisk_text.py:75 msgid "" "The boot disk allows you to boot your Red Hat Linux system from a floppy " "diskette.\n" "\n" "Please remove any diskettes from the floppy drive and insert a blank " "diskette. All data will be ERASED during creation of the boot disk." msgstr "" #: ../iw/bootdisk_gui.py:63 ../textw/bootdisk_text.py:83 msgid "" "\n" "\n" "A boot disk is REQUIRED to boot a partitionless install." msgstr "" #: ../iw/bootdisk_gui.py:66 ../textw/bootdisk_text.py:89 msgid "" "An error occured while making the boot disk. Please make sure that there is " "a formatted floppy in the first floppy drive." msgstr "" #: ../iw/bootdisk_gui.py:74 msgid "Skip boot disk creation" msgstr "Opstart floppy niet aanmaken" #: ../iw/bootloader_gui.py:38 ../textw/bootloader_text.py:50 #: ../textw/bootloader_text.py:112 ../textw/bootloader_text.py:163 #: ../textw/bootloader_text.py:283 ../textw/bootloader_text.py:367 #, fuzzy msgid "Boot Loader Configuration" msgstr "Beeldscherm Instellingen" #: ../iw/bootloader_gui.py:68 ../textw/bootloader_text.py:129 msgid "" "Forcing the use of LBA32 for your bootloader when not supported by the BIOS " "can cause your machine to be unable to boot. We highly recommend you create " "a boot disk when asked later in the install process.\n" "\n" "Would you like to continue and force LBA32 mode?" msgstr "" #: ../iw/bootloader_gui.py:251 ../iw/bootloader_gui.py:438 #: ../iw/silo_gui.py:127 ../iw/silo_gui.py:280 ../iw/upgrade_swap_gui.py:121 #: ../textw/upgrade_text.py:115 msgid "Partition" msgstr "Partitie" #: ../iw/bootloader_gui.py:254 ../iw/bootloader_gui.py:439 #: ../iw/partition_gui.py:1373 ../iw/silo_gui.py:132 ../iw/silo_gui.py:281 #: ../libfdisk/gnomefsedit.c:3136 msgid "Type" msgstr "Type" #: ../iw/bootloader_gui.py:309 #, fuzzy msgid "Install Boot Loader record on:" msgstr "Installeer systeem" #: ../iw/bootloader_gui.py:330 #, fuzzy msgid "Kernel Parameters" msgstr "Kernel paramters" #: ../iw/bootloader_gui.py:341 ../textw/bootloader_text.py:106 msgid "Force use of LBA32 (not normally required)" msgstr "" #: ../iw/bootloader_gui.py:350 msgid "" "Please select the boot loader that the computer will use. GRUB is the " "default boot loader. However, if you do not wish to overwrite your current " "boot loader, select \"Do not install a boot loader.\" " msgstr "" #: ../iw/bootloader_gui.py:357 ../iw/silo_gui.py:257 #: ../textw/bootloader_text.py:259 ../textw/silo_text.py:207 #: ../textw/xconfig_text.py:373 ../textw/xconfig_text.py:380 #: ../textw/xconfig_text.py:473 ../textw/xconfig_text.py:474 #: ../textw/xconfig_text.py:493 ../textw/xconfig_text.py:494 msgid "Default" msgstr "" #: ../iw/bootloader_gui.py:357 ../iw/mouse_gui.py:145 #: ../iw/partition_gui.py:1372 ../iw/silo_gui.py:257 #: ../libfdisk/gnomefsedit.c:3133 ../textw/bootloader_text.py:191 #: ../textw/bootloader_text.py:259 ../textw/mouse_text.py:38 #: ../textw/silo_text.py:142 ../textw/silo_text.py:207 msgid "Device" msgstr "" #: ../iw/bootloader_gui.py:358 ../iw/silo_gui.py:257 #: ../textw/bootloader_text.py:259 ../textw/silo_text.py:207 msgid "Partition type" msgstr "" #: ../iw/bootloader_gui.py:358 ../iw/bootloader_gui.py:449 #: ../iw/silo_gui.py:257 ../iw/silo_gui.py:292 ../textw/bootloader_text.py:192 #: ../textw/bootloader_text.py:259 ../textw/silo_text.py:143 #: ../textw/silo_text.py:207 msgid "Boot label" msgstr "" #: ../iw/bootloader_gui.py:362 msgid "Use GRUB as the boot loader" msgstr "" #: ../iw/bootloader_gui.py:363 msgid "Use LILO as the boot loader" msgstr "" #: ../iw/bootloader_gui.py:364 #, fuzzy msgid "Do not install a boot loader" msgstr "Installeer systeem" #: ../iw/bootloader_gui.py:446 ../iw/silo_gui.py:288 msgid "Default boot image" msgstr "" #: ../iw/bootloaderpassword_gui.py:40 #, fuzzy msgid "Password accepted." msgstr "root-wachtwoord geaccepteerd" #: ../iw/bootloaderpassword_gui.py:45 #, fuzzy msgid "Password is too short." msgstr "Het root-wachtwoord is te kort" #: ../iw/bootloaderpassword_gui.py:47 #, fuzzy msgid "Passwords do not match." msgstr "De root-wachtwoorden komen niet overeen." #: ../iw/bootloaderpassword_gui.py:62 ../textw/bootloader_text.py:362 msgid "" "A GRUB password prevents users from passing arbitrary options to the " "kernel. For highest security, we recommend setting a password, but this is " "not necessary for more casual users." msgstr "" #: ../iw/bootloaderpassword_gui.py:69 #, fuzzy msgid "Use a GRUB Password?" msgstr "Root Wachtwoord" #: ../iw/bootloaderpassword_gui.py:94 #, fuzzy msgid "Please enter password" msgstr "Voer het root-wachtwoord in." #: ../iw/confirm_gui.py:43 msgid "About to Install" msgstr "" #: ../iw/confirm_gui.py:48 msgid "Click next to begin installation of Red Hat Linux." msgstr "Kies 'volgende' om de installatie van Red Hat Linux te starten." #: ../iw/confirm_gui.py:49 msgid "" "A complete log of your installation will be in /tmp/install.log after " "rebooting your system. You may want to keep this file for later reference. A " "kickstart file representing the choices you have made will be in /root/" "anaconda-ks.cfg." msgstr "" #: ../iw/confirm_gui.py:56 msgid "About to Upgrade" msgstr "" #: ../iw/confirm_gui.py:61 msgid "Click next to begin upgrade of Red Hat Linux." msgstr "Kies 'volgende' om de upgrade van Red Hat Linux te starten." #: ../iw/confirm_gui.py:62 ../textw/confirm_text.py:33 msgid "" "A complete log of your upgrade will be in /tmp/upgrade.log after rebooting " "your system. You may want to keep this file for later reference." msgstr "" #: ../iw/congrats_gui.py:8 ../iw/congrats_gui.py:64 msgid "Congratulations" msgstr "Gefeliciteerd" #: ../iw/congrats_gui.py:35 msgid "" "Congratulations, your Red Hat Linux installation is complete.\n" "\n" "Remove any CD-ROMs or floppy diskettes you used during the installation " "process and press to reboot your system. \n" "\n" "If you created a boot disk to use to boot your Red Hat Linux system, insert " "it before you press to reboot.\n" "\n" "For information on errata (updates and bug fixes), visit http://www.redhat." "com/errata.\n" "\n" "Information on using and configuring your system is available in the Red Hat " "Linux manuals at http://www.redhat.com/support/manuals." msgstr "" #: ../iw/congrats_gui.py:85 msgid "" "Congratulations, configuration is complete.\n" "\n" "For information on errata (updates and bug fixes), visit http://www.redhat." "com/errata.\n" "\n" "Information on using and configuring your system is available in the Red Hat " "Linux manuals.at http://www.redhat.com/support/manuals." msgstr "" #: ../iw/dependencies_gui.py:7 msgid "Unresolved Dependencies" msgstr "" #: ../iw/dependencies_gui.py:19 ../iw/package_gui.py:499 #: ../textw/packages_text.py:24 ../textw/packages_text.py:270 #, c-format msgid "Total install size: %s" msgstr "" #: ../iw/dependencies_gui.py:51 ../iw/package_gui.py:405 #: ../iw/progress_gui.py:179 ../textw/packages_text.py:301 msgid "Package" msgstr "Pakket" #: ../iw/dependencies_gui.py:51 ../textw/packages_text.py:301 msgid "Requirement" msgstr "" #: ../iw/dependencies_gui.py:68 ../textw/packages_text.py:316 msgid "Install packages to satisfy dependencies" msgstr "" #: ../iw/dependencies_gui.py:71 ../textw/packages_text.py:317 msgid "Do not install packages that have dependencies" msgstr "" #: ../iw/dependencies_gui.py:75 ../textw/packages_text.py:318 msgid "Ignore package dependencies" msgstr "" #: ../iw/examine_gui.py:11 msgid "Upgrade Examine" msgstr "" #: ../iw/examine_gui.py:38 #, fuzzy msgid "" "You don't have any Linux partitions.\n" "You can't upgrade this sytem!" msgstr "U heeft geen Linux partities. U kunt dit systeem niet upgraden!" #: ../iw/examine_gui.py:48 msgid "Please select the device containing the root filesystem: " msgstr "" #: ../iw/examine_gui.py:76 ../textw/upgrade_text.py:230 #, c-format msgid "Upgrading the Red Hat Linux installation on partition /dev/%s" msgstr "" #: ../iw/examine_gui.py:82 msgid "Customize packages to be upgraded" msgstr "" #: ../iw/fdisk_gui.py:12 ../textw/partmethod_text.py:27 msgid "fdisk" msgstr "" #: ../iw/fdisk_gui.py:77 msgid "Select drive to run fdisk on" msgstr "" #: ../iw/firewall_gui.py:10 ../textw/firewall_text.py:25 msgid "Firewall Configuration" msgstr "Firewall Instellingen" #: ../iw/firewall_gui.py:116 msgid "Warning: " msgstr "" #: ../iw/firewall_gui.py:116 msgid " is an invalid port." msgstr "" #: ../iw/firewall_gui.py:119 msgid "The format is 'port:protocol'. For example, '1234:udp'" msgstr "" #: ../iw/firewall_gui.py:206 msgid "Please choose your security level: " msgstr "Kies uw beveiligingsniveau" #: ../iw/firewall_gui.py:215 ../textw/firewall_text.py:47 msgid "High" msgstr "Zwaar" #: ../iw/firewall_gui.py:216 ../textw/firewall_text.py:50 msgid "Medium" msgstr "Middelmatig" #: ../iw/firewall_gui.py:217 ../textw/firewall_text.py:53 msgid "No firewall" msgstr "Geen firewall" #: ../iw/firewall_gui.py:233 msgid "Use default firewall rules" msgstr "" #: ../iw/firewall_gui.py:234 ../textw/firewall_text.py:23 msgid "Customize" msgstr "Aanpassen" #: ../iw/firewall_gui.py:247 msgid "Trusted devices:" msgstr "" #: ../iw/firewall_gui.py:272 ../textw/firewall_text.py:90 msgid "Allow incoming:" msgstr "" #: ../iw/firewall_gui.py:301 msgid "Other ports:" msgstr "" #: ../iw/format_gui.py:25 msgid "Choose partitions to Format" msgstr "" #: ../iw/installpath_gui.py:22 ../textw/installpath_text.py:45 msgid "Installation Type" msgstr "Type Installatie" #: ../iw/keyboard_gui.py:28 msgid "Keyboard Configuration" msgstr "Toetsenbord Instellingen" #: ../iw/keyboard_gui.py:102 #, fuzzy msgid "Which model keyboard is attached to the computer?" msgstr "Wat voor toetsenbord gebruikt U voor deze computer?" #: ../iw/keyboard_gui.py:111 msgid "Model" msgstr "Model" #: ../iw/keyboard_gui.py:131 msgid "Layout" msgstr "" #: ../iw/keyboard_gui.py:151 msgid "Dead Keys" msgstr "" #: ../iw/keyboard_gui.py:161 msgid "Enable dead keys" msgstr "" #: ../iw/keyboard_gui.py:162 msgid "Disable dead keys" msgstr "" #: ../iw/keyboard_gui.py:175 msgid "Test your selection here:" msgstr "Test uw keuze hier:" #: ../iw/language_gui.py:38 ../textw/language_text.py:44 msgid "What language would you like to use during the installation process?" msgstr "Welke taal wilt U gebruiken tijdens de installatie ?" #: ../iw/language_support_gui.py:22 #, fuzzy msgid "Additional Language Support" msgstr "Taal Ondersteuning" #: ../iw/language_support_gui.py:140 #, fuzzy msgid "Choose the default language for this system: " msgstr "Kies de standaard taal : " #: ../iw/language_support_gui.py:152 msgid "Currently installed languages:" msgstr "" #: ../iw/language_support_gui.py:154 #, fuzzy msgid "Choose additional languages you would like to use on this system:" msgstr "Welke taal wilt U gebruiken tijdens de installatie ?" #: ../iw/language_support_gui.py:203 msgid "Select all" msgstr "Alles selecteren" #: ../iw/language_support_gui.py:209 ../textw/language_text.py:115 msgid "Reset" msgstr "" #: ../iw/language_support_gui.py:223 msgid "Select as default" msgstr "Als standaard selecteren" #: ../iw/mouse_gui.py:13 msgid "Mouse Configuration" msgstr "Muis Configureren" #: ../iw/mouse_gui.py:134 ../textw/mouse_text.py:20 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "" #: ../iw/mouse_gui.py:135 ../textw/mouse_text.py:21 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "" #: ../iw/mouse_gui.py:136 ../textw/mouse_text.py:22 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "" #: ../iw/mouse_gui.py:137 ../textw/mouse_text.py:23 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "" #: ../iw/mouse_gui.py:139 msgid "Emulate 3 Buttons" msgstr "" #: ../iw/mouse_gui.py:145 msgid "Port" msgstr "Poort" #: ../iw/mouse_gui.py:216 #, fuzzy msgid "Which model mouse is attached to the computer?" msgstr "Wat voor muis gebruikt U?" #: ../iw/network_gui.py:8 ../textw/network_text.py:115 msgid "Network Configuration" msgstr "Netwerk Instellingen" #: ../iw/network_gui.py:162 msgid "Configure using DHCP" msgstr "" #: ../iw/network_gui.py:168 msgid "Activate on boot" msgstr "" #: ../iw/network_gui.py:179 msgid "IP Address" msgstr "IP Adres" #: ../iw/network_gui.py:180 ../loader/net.c:806 msgid "Netmask" msgstr "" #: ../iw/network_gui.py:181 ../loader/loader.c:308 msgid "Network" msgstr "" #: ../iw/network_gui.py:182 msgid "Broadcast" msgstr "" #: ../iw/network_gui.py:232 ../loader/net.c:610 ../loader/net.c:808 #: ../textw/network_text.py:169 msgid "Hostname" msgstr "" #: ../iw/network_gui.py:233 msgid "Gateway" msgstr "" #: ../iw/network_gui.py:233 msgid "Primary DNS" msgstr "Eerste DNS server" #: ../iw/network_gui.py:233 msgid "Secondary DNS" msgstr "Tweede DNS server" #: ../iw/network_gui.py:233 msgid "Ternary DNS" msgstr "Derde DNS server" #: ../iw/package_gui.py:28 ../textw/packages_text.py:237 msgid "Individual Package Selection" msgstr "" #: ../iw/package_gui.py:263 msgid "Total install size: " msgstr "" #: ../iw/package_gui.py:391 msgid "Tree View" msgstr "" #: ../iw/package_gui.py:393 msgid "Flat View" msgstr "" #: ../iw/package_gui.py:407 ../iw/partition_gui.py:1373 msgid "Size (MB)" msgstr "Grootte (MB)" #: ../iw/package_gui.py:438 msgid "Total size: " msgstr "Totale grootte:" #: ../iw/package_gui.py:441 msgid "Select all in group" msgstr "" #: ../iw/package_gui.py:445 msgid "Unselect all in group" msgstr "" #: ../iw/package_gui.py:478 ../textw/packages_text.py:57 msgid "Package Group Selection" msgstr "" #: ../iw/package_gui.py:564 ../textw/packages_text.py:50 msgid "Select individual packages" msgstr "Individuele Pakketten kiezen" #: ../iw/partition_gui.py:301 ../iw/partition_gui.py:322 #: ../iw/partition_gui.py:324 ../textw/partition_text.py:170 #: ../textw/partition_text.py:172 ../textw/partition_text.py:174 #: ../textw/partition_text.py:199 msgid "" msgstr "" #: ../iw/partition_gui.py:463 ../textw/fdisk_text.py:38 msgid "Disk Setup" msgstr "" #: ../iw/partition_gui.py:522 ../textw/partition_text.py:61 #: ../textw/partition_text.py:98 #, fuzzy msgid "Free space" msgstr "Schijfruimte" #: ../iw/partition_gui.py:524 ../textw/partition_text.py:63 msgid "Extended" msgstr "" #: ../iw/partition_gui.py:526 ../textw/partition_text.py:65 msgid "software RAID" msgstr "" #: ../iw/partition_gui.py:542 ../iw/partition_gui.py:600 #: ../textw/partition_text.py:77 ../textw/partition_text.py:129 #, fuzzy msgid "None" msgstr "Gereed" #: ../iw/partition_gui.py:544 #, fuzzy msgid "Free" msgstr "Beschikbaar (M)" #: ../iw/partition_gui.py:602 ../textw/partition_text.py:131 #, fuzzy, c-format msgid "RAID Device %s" msgstr "RAID device verwijderen ?" #: ../iw/partition_gui.py:671 msgid "Additional Size Options" msgstr "" #: ../iw/partition_gui.py:676 msgid "Fixed size" msgstr "" #: ../iw/partition_gui.py:677 msgid "Fill all space up to (MB):" msgstr "" #: ../iw/partition_gui.py:685 msgid "Fill to maximum allowable size" msgstr "" #: ../iw/partition_gui.py:714 ../textw/partition_text.py:515 #, fuzzy msgid "Add Partition" msgstr "Partitie" #: ../iw/partition_gui.py:731 ../iw/partition_gui.py:1184 #: ../libfdisk/gnomefsedit.c:925 ../libfdisk/gnomefsedit.c:2033 #: ../libfdisk/newtfsedit.c:392 ../textw/partition_text.py:189 msgid "Mount Point:" msgstr "" #: ../iw/partition_gui.py:739 ../textw/partition_text.py:571 #, fuzzy msgid "Filesystem Type:" msgstr "Root Bestandssysteem Grootte" #: ../iw/partition_gui.py:747 #, fuzzy msgid "Original Filesystem Type:" msgstr "Root Bestandssysteem Grootte" #: ../iw/partition_gui.py:756 ../libfdisk/newtfsedit.c:494 msgid "Unknown" msgstr "Onbekend" #: ../iw/partition_gui.py:768 ../libfdisk/gnomefsedit.c:1134 #: ../libfdisk/newtfsedit.c:527 ../textw/partition_text.py:238 msgid "Allowable Drives:" msgstr "" #: ../iw/partition_gui.py:776 #, fuzzy msgid "Drive:" msgstr "Drive" #: ../iw/partition_gui.py:785 #, fuzzy msgid "Original Filesystem Label:" msgstr "Root Bestandssysteem Grootte" #: ../iw/partition_gui.py:796 ../iw/partition_gui.py:831 #: ../textw/partition_text.py:259 ../textw/partition_text.py:342 #: ../textw/partition_text.py:587 #, fuzzy msgid "Size (MB):" msgstr "Grootte (MB)" #: ../iw/partition_gui.py:809 ../textw/partition_text.py:322 msgid "Start Cylinder:" msgstr "" #: ../iw/partition_gui.py:825 ../textw/partition_text.py:335 msgid "End Cylinder:" msgstr "" #: ../iw/partition_gui.py:847 msgid "How would you like to prepare the filesystem on this partition?" msgstr "" #: ../iw/partition_gui.py:856 ../textw/partition_text.py:424 msgid "Leave unchanged (preserve data)" msgstr "" #: ../iw/partition_gui.py:861 #, fuzzy msgid "Format partition as:" msgstr "Automatische Partitionering" #: ../iw/partition_gui.py:881 #, fuzzy msgid "Migrate partition to:" msgstr "Automatische Partitionering" #: ../iw/partition_gui.py:902 #, fuzzy msgid "Check for bad blocks?" msgstr "Controleren op diskfouten tijdens het formatteren" #: ../iw/partition_gui.py:933 ../textw/partition_text.py:557 msgid "Force to be a primary partition" msgstr "" #: ../iw/partition_gui.py:940 ../textw/partition_text.py:422 #: ../textw/partition_text.py:560 #, fuzzy msgid "Check for bad blocks" msgstr "Controleren op diskfouten tijdens het formatteren" #: ../iw/partition_gui.py:1011 ../iw/partition_gui.py:1020 #: ../iw/partition_gui.py:1058 ../iw/partition_gui.py:1308 #: ../textw/partition_text.py:694 ../textw/partition_text.py:711 #: ../textw/partition_text.py:818 msgid "Error With Request" msgstr "" #: ../iw/partition_gui.py:1121 #, fuzzy, c-format msgid "Could not allocate requested partitions: %s." msgstr "Er zijn niet toegewezen partities..." #: ../iw/partition_gui.py:1127 ../textw/partition_text.py:152 #, fuzzy msgid "Modify Partition" msgstr "Partitie" #: ../iw/partition_gui.py:1128 ../textw/partition_text.py:152 #, fuzzy msgid "Add anyway" msgstr "Swap" #: ../iw/partition_gui.py:1132 #, fuzzy, c-format msgid "Warning: %s." msgstr "Waarschuwing" #: ../iw/partition_gui.py:1167 msgid "Make Raid Device" msgstr "" #: ../iw/partition_gui.py:1191 ../textw/partition_text.py:209 #, fuzzy msgid "Filesystem type:" msgstr "Root Bestandssysteem Grootte" #: ../iw/partition_gui.py:1202 ../textw/partition_text.py:359 msgid "RAID Level:" msgstr "" #: ../iw/partition_gui.py:1232 ../textw/partition_text.py:377 msgid "Raid Members:" msgstr "" #: ../iw/partition_gui.py:1243 msgid "Number of spares:" msgstr "" #: ../iw/partition_gui.py:1250 ../textw/partition_text.py:766 #, fuzzy msgid "Format partition?" msgstr "Automatische Partitionering" #: ../iw/partition_gui.py:1353 #, fuzzy msgid "_New" msgstr "Nieuw" #: ../iw/partition_gui.py:1354 #, fuzzy msgid "_Edit" msgstr "Wijzigen" #: ../iw/partition_gui.py:1355 ../libfdisk/gnomefsedit.c:3699 msgid "_Delete" msgstr "_Verwijder" #: ../iw/partition_gui.py:1356 ../libfdisk/gnomefsedit.c:3694 msgid "_Reset" msgstr "_Reset" #: ../iw/partition_gui.py:1357 msgid "Make _Raid" msgstr "" #: ../iw/partition_gui.py:1372 #, fuzzy msgid "Start" msgstr "Status" #: ../iw/partition_gui.py:1372 msgid "End" msgstr "" #: ../iw/partition_gui.py:1373 msgid "Format" msgstr "" #: ../iw/partition_gui.py:1419 ../textw/partition_text.py:963 msgid "Automatic Partitioning" msgstr "Automatisch Partitioneren" #: ../iw/partition_gui.py:1438 #, fuzzy msgid "" "You need to select at least one drive to have Red Hat Linux installed onto." msgstr "U moet tenminste 1 taal kiezen" #: ../iw/partition_gui.py:1477 #, fuzzy msgid "I want to have automatic partitioning:" msgstr "Automatisch Partitioneren" #: ../iw/partition_gui.py:1508 ../textw/partition_text.py:986 #, fuzzy msgid "Which drive(s) do you want to use for this installation?" msgstr "Waar wilt U de bootloader installeren?" #: ../iw/partition_gui.py:1525 msgid "" "Review (allows you to see and change the automatic partitioning results)" msgstr "" #: ../iw/partmethod_gui.py:24 ../textw/partmethod_text.py:24 #, fuzzy msgid "Disk Partitioning Setup" msgstr "Partitie" #: ../iw/partmethod_gui.py:59 msgid "Have the installer automatically partition for you" msgstr "" #: ../iw/partmethod_gui.py:62 msgid "Manually partition with Disk Druid" msgstr "" #: ../iw/partmethod_gui.py:65 msgid "Manually partition with fdisk [experts only]" msgstr "" #: ../iw/progress_gui.py:15 msgid "Installing Packages" msgstr "Pakketten Installeren" #: ../iw/progress_gui.py:107 #, c-format msgid "%s KBytes" msgstr "%s KByte" #: ../iw/progress_gui.py:180 ../iw/progress_gui.py:233 msgid "Size" msgstr "Grootte" #: ../iw/progress_gui.py:181 msgid "Summary" msgstr "Overzicht" #: ../iw/progress_gui.py:211 msgid "Package Progress: " msgstr "Pakket Voortgang:" #: ../iw/progress_gui.py:216 msgid "Total Progress: " msgstr "Algemene Voortgang:" #: ../iw/progress_gui.py:233 msgid "Status" msgstr "Status" #: ../iw/progress_gui.py:233 msgid "Packages" msgstr "Pakketten" #: ../iw/progress_gui.py:233 msgid "Time" msgstr "Tijd" #: ../iw/progress_gui.py:243 msgid "Total" msgstr "Totaal" #: ../iw/progress_gui.py:244 msgid "Completed" msgstr "Voltooid" #: ../iw/progress_gui.py:245 msgid "Remaining" msgstr "Resterend" #: ../iw/silo_gui.py:20 msgid "Silo Configuration" msgstr "Silo Instellingen" #: ../iw/silo_gui.py:164 msgid "Install SILO boot record on:" msgstr "" #: ../iw/silo_gui.py:181 msgid "Create PROM alias" msgstr "" #: ../iw/silo_gui.py:204 msgid "Set default PROM boot device to linux" msgstr "" #: ../iw/silo_gui.py:208 msgid "Kernel parameters" msgstr "Kernel paramters" #: ../iw/silo_gui.py:226 msgid "Create boot disk" msgstr "Boot floppy aanmaken" #: ../iw/silo_gui.py:236 msgid "Do not install SILO" msgstr "SILO niet installeren" #: ../iw/timezone_gui.py:31 ../textw/timezone_text.py:95 msgid "Time Zone Selection" msgstr "Tijdzone Keuze" #: ../iw/timezone_gui.py:160 msgid "View:" msgstr "" #: ../iw/timezone_gui.py:168 ../iw/timezone_gui.py:169 msgid "System clock uses UTC" msgstr "" #: ../iw/timezone_gui.py:217 msgid "Use Daylight Saving Time (US only)" msgstr "Zomertijd gebruiken (alleen in de VS)" #: ../iw/timezone_gui.py:231 msgid "Location" msgstr "Lokatie" #: ../iw/timezone_gui.py:232 msgid "UTC Offset" msgstr "" #: ../iw/upgrade_migratefs_gui.py:29 ../textw/upgrade_text.py:30 #, fuzzy msgid "Migrate Filesystems" msgstr "Root Bestandssysteem Grootte" #: ../iw/upgrade_migratefs_gui.py:60 ../textw/upgrade_text.py:32 msgid "" "This release of Red Hat Linux supports the ext3 journalling filesystem. It " "has several benefits over the ext2 filesystem traditionally shipped in Red " "Hat Linux. It is possible to migrate the ext2 formatted partitions to ext3 " "without data loss.\n" "\n" "Which of these partitions would you like to migrate?" msgstr "" #: ../iw/upgrade_swap_gui.py:30 #, fuzzy msgid "Upgrade Swap Partition" msgstr "RAID Partitie" #: ../iw/upgrade_swap_gui.py:88 #, c-format msgid "" "The 2.4 kernel needs significantly more swap than older kernels, as much as " "twice as much swap space as RAM on the system. You currently have %dMB of " "swap configured, but you may create additional swap space on one of your " "file systems now." msgstr "" #: ../iw/upgrade_swap_gui.py:95 #, c-format msgid "" "\n" "\n" "The installer has detected %s MB of RAM.\n" msgstr "" #: ../iw/upgrade_swap_gui.py:107 msgid "I want to create a swap file" msgstr "" #: ../iw/upgrade_swap_gui.py:116 msgid "Select the partition to put the swap file on:" msgstr "" #: ../iw/upgrade_swap_gui.py:121 #, fuzzy msgid "Free Space (MB)" msgstr "Schijfruimte" #: ../iw/upgrade_swap_gui.py:136 #, c-format msgid "" "It is recommended that your swap file be at least %d MB. Please enter a " "size for the swap file:" msgstr "" #: ../iw/upgrade_swap_gui.py:151 ../textw/upgrade_text.py:136 #, fuzzy msgid "Swap file size (MB):" msgstr "Grootte (MB)" #: ../iw/upgrade_swap_gui.py:160 msgid "I don't want to create a swap file" msgstr "" #: ../iw/upgrade_swap_gui.py:170 msgid "" "It is stongly recommended that you create a swap file. Failure to do so " "could cause the installer to abort abnormally. Are you sure that you wish " "to continue?" msgstr "" #: ../iw/upgrade_swap_gui.py:178 ../textw/upgrade_text.py:181 msgid "The swap file must be between 1 and 2000 MB in size." msgstr "" #: ../iw/upgrade_swap_gui.py:185 ../textw/upgrade_text.py:176 msgid "" "There is not enough space on the device you selected for the swap partition." msgstr "" #: ../iw/welcome_gui.py:9 ../iw/welcome_gui.py:50 msgid "Welcome" msgstr "Welkom" #: ../iw/welcome_gui.py:93 msgid "Would you like to configure your system?" msgstr "Wilt U uw systeem instellen ?" #: ../iw/xconfig_gui.py:16 ../textw/xconfig_text.py:255 msgid "Monitor" msgstr "Beeldscherm" #: ../iw/xconfig_gui.py:18 msgid "Horizontal Frequency Range" msgstr "" #: ../iw/xconfig_gui.py:19 msgid "Vertical Frequency Range" msgstr "" #: ../iw/xconfig_gui.py:20 msgid "Test failed" msgstr "Test is mislukt" #: ../iw/xconfig_gui.py:26 msgid "Customize Graphics Configuration" msgstr "Grafische Instellingen Aanpassen" #: ../iw/xconfig_gui.py:187 ../textw/xconfig_text.py:167 msgid "Color Depth:" msgstr "" #: ../iw/xconfig_gui.py:192 ../textw/xconfig_text.py:98 msgid "256 Colors (8 Bit)" msgstr "" #: ../iw/xconfig_gui.py:192 ../textw/xconfig_text.py:98 msgid "High Color (16 Bit)" msgstr "" #: ../iw/xconfig_gui.py:192 ../textw/xconfig_text.py:98 msgid "True Color (24 Bit)" msgstr "" #: ../iw/xconfig_gui.py:201 msgid "Screen Resolution:" msgstr "Scherm Resolutie:" #: ../iw/xconfig_gui.py:282 msgid " Test Setting " msgstr "" #: ../iw/xconfig_gui.py:305 msgid "Please choose your default desktop environment:" msgstr "" #: ../iw/xconfig_gui.py:307 msgid "Your desktop environment is:" msgstr "Uw desktop omgeving is:" #: ../iw/xconfig_gui.py:322 ../textw/xconfig_text.py:188 #: ../textw/xconfig_text.py:197 msgid "GNOME" msgstr "GNOME" #: ../iw/xconfig_gui.py:324 ../textw/xconfig_text.py:190 #: ../textw/xconfig_text.py:199 msgid "KDE" msgstr "KDE" #: ../iw/xconfig_gui.py:353 msgid "Please choose your login type:" msgstr "" #: ../iw/xconfig_gui.py:360 ../textw/xconfig_text.py:208 msgid "Text" msgstr "Tekst" #: ../iw/xconfig_gui.py:361 ../textw/xconfig_text.py:206 msgid "Graphical" msgstr "Grafisch" #: ../iw/xconfig_gui.py:378 ../textw/xconfig_text.py:376 msgid "Monitor Configuration" msgstr "Beeldscherm Instellingen" #: ../iw/xconfig_gui.py:532 ../iw/xconfig_gui.py:843 msgid "Generic" msgstr "" #: ../iw/xconfig_gui.py:569 msgid "DDC Probed Monitor" msgstr "" #: ../iw/xconfig_gui.py:571 #, fuzzy msgid "Unprobed Monitor" msgstr "Beeldscherm" #: ../iw/xconfig_gui.py:618 ../iw/xconfig_gui.py:953 msgid "Restore original values" msgstr "Oorspronkelijk waardes terughalen" #: ../iw/xconfig_gui.py:626 msgid "Horizontal Sync:" msgstr "" #: ../iw/xconfig_gui.py:628 msgid "Vertical Sync:" msgstr "" #: ../iw/xconfig_gui.py:634 msgid "kHz" msgstr "kHz" #: ../iw/xconfig_gui.py:637 msgid "Hz" msgstr "Hz" #: ../iw/xconfig_gui.py:655 #, fuzzy msgid "Graphical Interface (X) Configuration" msgstr "Grafische Instellingen Aanpassen" #: ../iw/xconfig_gui.py:807 msgid "" "Your video ram size can not be autodetected. Choose your video ram size " "from the choices below:" msgstr "" #: ../iw/xconfig_gui.py:815 msgid "" "In most cases your video hardware can be probed to automatically determine " "the best settings for your display." msgstr "" #: ../iw/xconfig_gui.py:821 msgid "" "If the probed settings do not match your hardware, select the correct " "hardware settings below:" msgstr "" #: ../iw/xconfig_gui.py:848 msgid "Other" msgstr "" #: ../iw/xconfig_gui.py:931 msgid "Video card RAM: " msgstr "" #: ../iw/xconfig_gui.py:957 ../textw/xconfig_text.py:550 msgid "Skip X Configuration" msgstr "X Configuratie overslaan" #: ../textw/bootdisk_text.py:26 msgid "" "A custom boot disk provides a way of booting into your Linux system without " "depending on the normal boot loader. This is useful if you don't want to " "install lilo on your system, another operating system removes lilo, or lilo " "doesn't work with your hardware configuration. A custom boot disk can also " "be used with the Red Hat rescue image, making it much easier to recover from " "severe system failures.\n" "\n" "Would you like to create a boot disk for your system?" msgstr "" #: ../textw/bootdisk_text.py:50 ../textw/bootdisk_text.py:85 msgid "Boot Disk" msgstr "Boot Disk" #: ../textw/bootdisk_text.py:67 ../textw/bootdisk_text.py:93 #: ../textw/silo_text.py:36 ../textw/upgrade_text.py:126 msgid "Skip" msgstr "Overslaan" #: ../textw/bootloader_text.py:29 #, fuzzy msgid "Which boot loader would you like to use?" msgstr "Wat voor soort systeem wilt U installeren?" #: ../textw/bootloader_text.py:45 msgid "Use GRUB Boot Loader" msgstr "" #: ../textw/bootloader_text.py:46 msgid "Use LILO Boot Loader" msgstr "" #: ../textw/bootloader_text.py:47 #, fuzzy msgid "No Boot Loader" msgstr "Installeer systeem" #: ../textw/bootloader_text.py:66 msgid "Skip Boot Loader" msgstr "" #: ../textw/bootloader_text.py:67 msgid "" "You have elected to not install any boot loader. It is strongly recommended " "that you install a boot loader unless you have an advanced need. A boot " "loader is almost always required in order to reboot your system into Linux " "directly from the hard drive.\n" "\n" "Are you sure you want to skip boot loader installation?" msgstr "" #: ../textw/bootloader_text.py:97 ../textw/silo_text.py:25 msgid "" "A few systems will need to pass special options to the kernel at boot time " "for the system to function properly. If you need to pass boot options to the " "kernel, enter them now. If you don't need any or aren't sure, leave this " "blank." msgstr "" #: ../textw/bootloader_text.py:164 #, fuzzy msgid "Where do you want to install the boot loader?" msgstr "Waar wilt U de bootloader installeren?" #: ../textw/bootloader_text.py:196 ../textw/silo_text.py:147 #: ../textw/silo_text.py:168 msgid "Clear" msgstr "Wissen" #: ../textw/bootloader_text.py:205 msgid "Edit Boot Label Please" msgstr "" #: ../textw/bootloader_text.py:223 ../textw/bootloader_text.py:228 msgid "Invalid Boot Label" msgstr "Ongeldig Boot Label" #: ../textw/bootloader_text.py:224 msgid "Boot label may not be empty." msgstr "Het Boot Label mag niet leeg zijn" #: ../textw/bootloader_text.py:229 msgid "Boot label contains illegal characters." msgstr "Het Boot Label bevat ongeldige tekens." #: ../textw/bootloader_text.py:278 ../textw/silo_text.py:219 msgid "" "The boot manager Red Hat uses can boot other operating systems as well. You " "need to tell me what partitions you would like to be able to boot and what " "label you want to use for each of them." msgstr "" #: ../textw/bootloader_text.py:372 #, fuzzy msgid "Use a GRUB Password" msgstr "Root Wachtwoord" #: ../textw/bootloader_text.py:384 #, fuzzy msgid "Boot Loader Password:" msgstr "Root Wachtwoord:" #: ../textw/bootloader_text.py:414 #, fuzzy msgid "Passwords Do Not Match" msgstr "De root-wachtwoorden komen niet overeen." #: ../textw/bootloader_text.py:415 #, fuzzy msgid "Passwords do not match" msgstr "De root-wachtwoorden komen niet overeen." #: ../textw/complete_text.py:25 msgid " to reboot" msgstr "" #: ../textw/complete_text.py:28 ../textw/complete_text.py:50 #: ../textw/complete_text.py:65 msgid "Complete" msgstr "Voltooid" #: ../textw/complete_text.py:29 msgid "" "Congratulations, your Red Hat Linux installation is complete.\n" "\n" "Remove any CD-ROMs or floppy diskettes you used during the installation " "process and press to reboot your system. \n" "\n" "If you created a boot disk to use to boot your Red Hat Linux system, insert " "it before you press to reboot.\n" "\n" "For information on errata (updates and bug fixes), visit http://www.redhat." "com/errata.\n" "\n" "Information on using your system is available in the Red Hat Linux manuals " "at http://www.redhat.com/support/manuals." msgstr "" #: ../textw/complete_text.py:48 msgid " to continue" msgstr "" #: ../textw/complete_text.py:51 msgid "" "Congratulations, package installation is complete.\n" "\n" "Press return to continue.\n" "\n" "Information on configuring and using your Red Hat Linux system is contained " "in the Red Hat Linux manuals." msgstr "" #: ../textw/complete_text.py:62 msgid " to exit" msgstr "" #: ../textw/complete_text.py:66 msgid "" "Congratulations, configuration is complete.\n" "\n" "For information on errata (updates and bug fixes), visit http://www.redhat." "com/errata.\n" "\n" "Information on using your system is available in the Red Hat Linux manuals." "http://www.redhat.com/support/manuals." msgstr "" #: ../textw/confirm_text.py:20 msgid "Installation to begin" msgstr "" #: ../textw/confirm_text.py:21 msgid "" "A complete log of your installation will be in /tmp/install.log after " "rebooting your system. You may want to keep this file for later reference." msgstr "" #: ../textw/confirm_text.py:32 msgid "Upgrade to begin" msgstr "" #: ../textw/fdisk_text.py:39 msgid "Choose a disk to run fdisk on" msgstr "" #: ../textw/firewall_text.py:27 msgid "" "A firewall protects against unauthorized network intrusions. High security " "blocks all incoming accesses. Medium blocks access to system services (such " "as telnet or printing), but allows other connections. No firewall allows all " "connections and is not recommended. " msgstr "" #: ../textw/firewall_text.py:43 msgid "Security Level:" msgstr "Beveiligingsniveau:" #: ../textw/firewall_text.py:73 msgid "Trusted Devices:" msgstr "Betrouwbare interfaces:" #: ../textw/firewall_text.py:95 msgid "DHCP" msgstr "DHCP" #: ../textw/firewall_text.py:97 msgid "SSH" msgstr "SSH" #: ../textw/firewall_text.py:99 msgid "Telnet" msgstr "Telnet" #: ../textw/firewall_text.py:101 msgid "WWW (HTTP)" msgstr "WWW (HTTP)" #: ../textw/firewall_text.py:103 msgid "Mail (SMTP)" msgstr "E-mail (SMTP)" #: ../loader/loader.c:1213 ../textw/firewall_text.py:105 msgid "FTP" msgstr "FTP" #: ../textw/firewall_text.py:109 msgid "Other ports" msgstr "" #: ../textw/firewall_text.py:135 ../textw/firewall_text.py:199 #: ../textw/language_text.py:152 msgid "Invalid Choice" msgstr "Ongeldige Keuze" #: ../textw/firewall_text.py:136 msgid "You cannot customize a disabled firewall." msgstr "" #: ../textw/firewall_text.py:141 msgid "Firewall Configuration - Customize" msgstr "" #: ../textw/firewall_text.py:143 msgid "" "You can customize your firewall in two ways. First, you can select to allow " "all traffic from certain network interfaces. Second, you can allow certain " "protocols explicitly through the firewall. In a comma separated list, " "specify additional ports in the form 'service:protocol' such as 'imap:tcp'. " msgstr "" #: ../textw/firewall_text.py:200 #, c-format msgid "Warning: %s is not a valid port." msgstr "Waarschuwing: %s is geen geldige poort." #: ../textw/installpath_text.py:46 msgid "What type of system would you like to install?" msgstr "Wat voor soort systeem wilt U installeren?" #: ../textw/keyboard_text.py:37 msgid "Keyboard Selection" msgstr "Toetsenbord Keuze" #: ../textw/keyboard_text.py:38 msgid "Which model keyboard is attached to this computer?" msgstr "Wat voor toetsenbord gebruikt U voor deze computer?" #: ../textw/language_text.py:115 msgid "Select All" msgstr "Alles selecteren" #: ../textw/language_text.py:117 msgid "Choose additional languages that you would like to use on this system:" msgstr "" #: ../textw/language_text.py:121 msgid "Language Support" msgstr "Taal Ondersteuning" #: ../textw/language_text.py:153 msgid "You must select at least one language to install." msgstr "U moet tenminste 1 taal kiezen" #: ../textw/language_text.py:181 msgid "Default Language" msgstr "Standaard taal" #: ../textw/language_text.py:182 #, fuzzy msgid "Choose the default language for this system: " msgstr "Kies de standaard taal : " #: ../textw/mouse_text.py:39 msgid "What device is your mouse located on?" msgstr "" #: ../textw/mouse_text.py:71 msgid "Which model mouse is attached to this computer?" msgstr "Wat voor muis gebruikt U?" #: ../textw/mouse_text.py:82 msgid "Emulate 3 Buttons?" msgstr "" #: ../textw/mouse_text.py:85 msgid "Mouse Selection" msgstr "Muis keuze" #: ../textw/network_text.py:77 msgid "Use bootp/dhcp" msgstr "" #: ../loader/net.c:309 ../textw/network_text.py:82 msgid "IP address:" msgstr "IP adres:" #: ../loader/net.c:312 ../textw/network_text.py:83 msgid "Netmask:" msgstr "" #: ../loader/net.c:315 ../textw/network_text.py:84 msgid "Default gateway (IP):" msgstr "" #: ../loader/net.c:318 ../textw/network_text.py:85 msgid "Primary nameserver:" msgstr "Hoofd nameserver" #: ../textw/network_text.py:86 msgid "Secondary nameserver:" msgstr "Tweede nameserver:" #: ../textw/network_text.py:87 msgid "Ternary nameserver:" msgstr "Derde nameserver:" #: ../textw/network_text.py:132 msgid "Invalid information" msgstr "Ongeldige informatie" #: ../textw/network_text.py:133 msgid "You must enter valid IP information to continue" msgstr "U moet geldige IP instellingen invoeren om verder te gaan" #: ../textw/network_text.py:165 msgid "Hostname Configuration" msgstr "" #: ../textw/network_text.py:166 msgid "" "The hostname is the name of your computer. If your computer is attached to " "a network, this may be assigned by your network administrator." msgstr "" #: ../textw/packages_text.py:91 msgid "Package :" msgstr "Pakket :" #: ../textw/packages_text.py:96 msgid "Size :" msgstr "Grootte :" #: ../textw/packages_text.py:97 #, c-format msgid "%.1f KBytes" msgstr "%.1f KByte" #: ../textw/packages_text.py:116 msgid "Total size" msgstr "Totale grootte" #: ../textw/packages_text.py:245 msgid "" " ,<+>,<-> selection | help | package description" msgstr "" #: ../textw/packages_text.py:293 msgid "Package Dependencies" msgstr "Pakket Afhankelijkheden" #: ../textw/packages_text.py:295 msgid "" "Some of the packages you have selected to install require packages you have " "not selected. If you just select Ok all of those required packages will be " "installed." msgstr "" #: ../textw/partition_text.py:148 #, fuzzy, c-format msgid "Could not allocated requested partitions: %s." msgstr "Er zijn niet toegewezen partities..." #: ../textw/partition_text.py:151 #, fuzzy, c-format msgid "Warning: %s" msgstr "Waarschuwing" #: ../textw/partition_text.py:293 #, fuzzy msgid "Fixed Size:" msgstr "Ongeldige grootte" #: ../textw/partition_text.py:295 msgid "Fill maximum size of (MB):" msgstr "" #: ../textw/partition_text.py:299 msgid "Fill all available space:" msgstr "" #: ../textw/partition_text.py:395 msgid "Number of spares?" msgstr "" #: ../textw/partition_text.py:413 ../textw/partition_text.py:610 #, fuzzy msgid "Filesystem Options" msgstr "Bestandssysteem Formateren" #: ../textw/partition_text.py:416 msgid "" "Please choose how you would like to prepare the filesystem on this partition." msgstr "" #: ../textw/partition_text.py:433 msgid "Format as:" msgstr "" #: ../textw/partition_text.py:452 msgid "Migrate to:" msgstr "" #: ../textw/partition_text.py:581 #, fuzzy msgid "Filesystem Label:" msgstr "Root Bestandssysteem Grootte" #: ../textw/partition_text.py:592 #, fuzzy msgid "Filesystem Option:" msgstr "Root Bestandssysteem Grootte" #: ../textw/partition_text.py:618 #, c-format msgid "Format as %s" msgstr "" #: ../textw/partition_text.py:620 #, c-format msgid "Migrate to %s" msgstr "" #: ../textw/partition_text.py:622 #, fuzzy msgid "Leave unchanged" msgstr "Wijzigingen Opslaan" #: ../textw/partition_text.py:741 #, fuzzy msgid "Make RAID Device" msgstr "RAID device verwijderen ?" #: ../textw/partition_text.py:810 msgid "Too many spares" msgstr "" #: ../textw/partition_text.py:811 msgid "The maximum number of spares with a RAID0 array is 0." msgstr "" #: ../textw/partition_text.py:893 #, fuzzy msgid "Partitioning" msgstr "Partitie" #: ../textw/partition_text.py:903 msgid "New" msgstr "Nieuw" #: ../textw/partition_text.py:903 #, fuzzy msgid "RAID" msgstr "" #: ../textw/partition_text.py:906 msgid "" " F1-Help F2-New F3-Edit F4-Delete F5-Reset F12-Ok " msgstr "" #: ../libfdisk/newtfsedit.c:1613 ../textw/partition_text.py:933 msgid "No Root Partition" msgstr "Geen Root Partitie" #: ../textw/partition_text.py:934 msgid "Must have a / partition to install on." msgstr "" #: ../textw/partmethod_text.py:26 #, fuzzy msgid "Autopartitioning" msgstr "Automatisch Partitioneren" #: ../textw/partmethod_text.py:26 msgid "Disk Druid" msgstr "" #: ../textw/progress_text.py:79 msgid "Package Installation" msgstr "Pakket Installatie" #: ../textw/progress_text.py:81 msgid "Name : " msgstr "Naam : " #: ../textw/progress_text.py:82 msgid "Size : " msgstr "Grootte :" #: ../textw/progress_text.py:83 msgid "Summary: " msgstr "Beschr.:" #: ../textw/progress_text.py:109 msgid " Packages" msgstr " Pakketten" #: ../textw/progress_text.py:110 msgid " Bytes" msgstr " Bytes" #: ../textw/progress_text.py:111 msgid " Time" msgstr " Tijd" #: ../textw/progress_text.py:113 msgid "Total :" msgstr "Totaal :" #: ../textw/progress_text.py:120 msgid "Completed: " msgstr "Voltooid :" #: ../textw/progress_text.py:130 msgid "Remaining: " msgstr "Resterend:" #: ../textw/silo_text.py:39 ../textw/silo_text.py:112 #: ../textw/silo_text.py:224 msgid "SILO Configuration" msgstr "SILO Configuratie" #: ../textw/silo_text.py:77 msgid "Create PROM alias `linux'" msgstr "" #: ../textw/silo_text.py:78 msgid "Set default PROM boot device" msgstr "" #: ../textw/silo_text.py:114 msgid "Where do you want to install the bootloader?" msgstr "Waar wilt U de bootloader installeren?" #: ../textw/silo_text.py:155 msgid "Edit Boot Label" msgstr "" #: ../textw/timezone_text.py:77 msgid "What time zone are you located in?" msgstr "In welke tijdzone bevindt U zich?" #: ../textw/timezone_text.py:92 msgid "Hardware clock set to GMT?" msgstr "" #: ../textw/upgrade_text.py:97 #, c-format msgid "" "The 2.4 kernel needs significantly more swap than older kernels, as much as " "twice as much swap space as RAM on the system. You currently have %dMB of " "swap configured, but you may create additional swap space on one of your " "file systems now." msgstr "" #: ../textw/upgrade_text.py:115 #, fuzzy msgid "Free Space" msgstr "Schijfruimte" #: ../textw/upgrade_text.py:130 msgid "RAM detected (MB):" msgstr "" #: ../textw/upgrade_text.py:133 #, fuzzy msgid "Suggested size (MB):" msgstr "Grootte (MB)" #: ../textw/upgrade_text.py:144 #, fuzzy msgid "Add Swap" msgstr "Swap" #: ../textw/upgrade_text.py:169 msgid "The value you entered is not a valid number." msgstr "" #: ../textw/upgrade_text.py:198 msgid "You don't have any Linux partitions. You can't upgrade this system!" msgstr "U heeft geen Linux partities. U kunt dit systeem niet upgraden!" #: ../textw/upgrade_text.py:215 msgid "System to Upgrade" msgstr "Systeem om te upgraden" #: ../textw/upgrade_text.py:229 #, fuzzy msgid "Upgrade Partition" msgstr "RAID Partitie" #: ../textw/upgrade_text.py:251 msgid "Customize Packages to Upgrade" msgstr "Aanpassen van de uptegraden pakketten" #: ../textw/upgrade_text.py:252 msgid "" "The packages you have installed, and any other packages which are needed to " "satisfy their dependencies, have been selected for installation. Would you " "like to customize the set of packages that will be upgraded?" msgstr "" #: ../textw/userauth_text.py:21 msgid "Root Password" msgstr "Root Wachtwoord" #: ../textw/userauth_text.py:23 msgid "" "Pick a root password. You must type it twice to ensure you know what it is " "and didn't make a mistake in typing. Remember that the root password is a " "critical part of system security!" msgstr "" "Kies een wachtwoord voor de 'root' gebruiker. U moet het wachtwoord twee " "maal invoeren om er zeker van te zijn dat U geen typfout heeft gemaakt. Denk " "er aan dat het root-wachtwoord een critisch onderdeel van de " "systeembeveiliging is!" #: ../textw/userauth_text.py:37 msgid "Password (again):" msgstr "Wachtwoord (herhaal)" #: ../textw/userauth_text.py:53 ../textw/userauth_text.py:120 msgid "Password Length" msgstr "Wachtwoord lengte" #: ../textw/userauth_text.py:54 msgid "The root password must be at least 6 characters long." msgstr "Het root-wachtwoord moet tenminste 6 tekens lang zijn." #: ../textw/userauth_text.py:58 ../textw/userauth_text.py:128 msgid "Password Mismatch" msgstr "" #: ../textw/userauth_text.py:59 ../textw/userauth_text.py:129 msgid "The passwords you entered were different. Please try again." msgstr "De wachtwoorden zijn verschillend. Probeer opniew." #: ../textw/userauth_text.py:87 msgid "Add User" msgstr "Gebruiker toevoegen" #: ../textw/userauth_text.py:92 msgid "User ID" msgstr "" #: ../textw/userauth_text.py:93 msgid "Password" msgstr "Wachtwoord" #: ../textw/userauth_text.py:94 msgid "Password (confirm)" msgstr "Wachtwoord (bevestig)" #: ../textw/userauth_text.py:107 msgid "Bad User ID" msgstr "" #: ../textw/userauth_text.py:108 msgid "" "User IDs must be less than 8 characters and contain only characters A-Z, a-" "z, and 0-9." msgstr "" #: ../textw/userauth_text.py:115 msgid "Missing User ID" msgstr "" #: ../textw/userauth_text.py:116 msgid "You must provide a user ID" msgstr "" #: ../textw/userauth_text.py:121 msgid "The password must be at least 6 characters long." msgstr "Het wachtwoord moet tenminste 6 tekens lang zijn." #: ../textw/userauth_text.py:137 ../textw/userauth_text.py:145 msgid "User Exists" msgstr "" #: ../textw/userauth_text.py:138 msgid "" "The root user is already configured. You don't need to add this user here." msgstr "" #: ../textw/userauth_text.py:146 msgid "This user id already exists. Choose another." msgstr "" #: ../textw/userauth_text.py:173 msgid "" "You should use a normal user account for most activities on your system. By " "not using the root account casually, you'll reduce the chance of disrupting " "your system's configuration." msgstr "" #: ../textw/userauth_text.py:184 msgid "User Account Setup" msgstr "Gebruikers Account Setup" #: ../textw/userauth_text.py:186 msgid "" "What user account would you like to have on the system? You should have at " "least one non-root account for normal work, but multi-user systems can have " "any number of accounts set up." msgstr "" #: ../textw/userauth_text.py:196 msgid "User name" msgstr "Gebruikersnaam" #: ../textw/userauth_text.py:223 msgid "Enter the information for the user." msgstr "" #: ../textw/userauth_text.py:241 msgid "Change the information for this user." msgstr "" #: ../textw/userauth_text.py:313 msgid "Use Shadow Passwords" msgstr "" #: ../textw/userauth_text.py:315 msgid "Enable MD5 Passwords" msgstr "" #: ../textw/userauth_text.py:326 msgid "NIS Domain:" msgstr "" #: ../textw/userauth_text.py:328 msgid "NIS Server:" msgstr "" #: ../textw/userauth_text.py:330 msgid "or use:" msgstr "" #: ../textw/userauth_text.py:333 msgid "Request server via broadcast" msgstr "" #: ../textw/userauth_text.py:372 msgid "Use TLS connections" msgstr "" #: ../textw/welcome_text.py:21 ../textw/welcome_text.py:40 msgid "Red Hat Linux" msgstr "Red Hat Linux" #: ../textw/welcome_text.py:22 #, fuzzy msgid "" "Welcome to Red Hat Linux!\n" "\n" "This installation process is outlined in detail in the Official Red Hat " "Linux Installation Guide available from Red Hat, Inc. If you have access to " "this manual, you should read the installation section before continuing.\n" "\n" "If you have purchased Official Red Hat Linux, be sure to register your " "purchase through our web site, http://www.redhat.com/." msgstr "" "Welkom bij Red Hat Linux!\n" "\n" "Dit installatie process is uitvoerig beschreven in de 'Official Red Hat " "Linus Installation Guide' die beschikbaar is van Red Hat Software. Als U " "deze handleiding bezit, raden wij U aan om het installatie hoofdstuk te " "lezen voordat U verder gaat. \n" "\n" "Als u een 'Official Red Hat Linux' heeft gekocht, bevelen wij U aan om uw " "aanschaf te registreren via onze website, http://www.redhat.com/." #: ../textw/welcome_text.py:41 msgid "" "Welcome to the Red Hat Linux!\n" "\n" "You have entered reconfiguration mode, which will allow you to configure " "site-specific options of your computer.\n" "\n" "To exit without changing your setup select the Cancel button below." msgstr "" #: ../textw/xconfig_text.py:22 msgid "Color Depth" msgstr "" #: ../textw/xconfig_text.py:23 msgid "Please select the color depth you would like to use:" msgstr "" #: ../textw/xconfig_text.py:41 #, fuzzy msgid "Resolution" msgstr "Scherm Resolutie:" #: ../textw/xconfig_text.py:42 msgid "Please select the resolution you would like to use:" msgstr "" #: ../textw/xconfig_text.py:155 ../textw/xconfig_text.py:164 #, fuzzy msgid "Test" msgstr "Tekst" #: ../textw/xconfig_text.py:158 #, fuzzy msgid "X Customization" msgstr "X Configuratie" #: ../textw/xconfig_text.py:161 #, c-format msgid "" "Select the color depth and video mode you want to use for your system. Use " "the '%s' button to test the video mode." msgstr "" #: ../textw/xconfig_text.py:171 ../textw/xconfig_text.py:178 #: ../textw/xconfig_text.py:387 ../textw/xconfig_text.py:398 #: ../textw/xconfig_text.py:569 ../textw/xconfig_text.py:576 #, fuzzy msgid "Change" msgstr "Wissel de CDROM" #: ../textw/xconfig_text.py:174 #, fuzzy msgid "Resolution:" msgstr "Scherm Resolutie:" #: ../textw/xconfig_text.py:184 msgid "Default Desktop:" msgstr "" #: ../textw/xconfig_text.py:204 #, fuzzy msgid "Default Login:" msgstr "Standaard taal" #: ../textw/xconfig_text.py:256 msgid "Please select the monitor attached to your system." msgstr "" #: ../textw/xconfig_text.py:273 msgid "Monitor Sync Rates" msgstr "" #: ../textw/xconfig_text.py:278 msgid "" "Please enter the sync rates for your monitor. \n" "\n" "NOTE - it is not usually necessary to edit sync rates manually, and care " "should be taken to make sure the values entered are accurate." msgstr "" #: ../textw/xconfig_text.py:283 msgid "HSync Rate: " msgstr "" #: ../textw/xconfig_text.py:288 msgid "VSync Rate: " msgstr "" #: ../textw/xconfig_text.py:312 msgid "horizontal" msgstr "" #: ../textw/xconfig_text.py:315 msgid "vertical" msgstr "" #: ../textw/xconfig_text.py:324 #, fuzzy msgid "Invalid Sync Rates" msgstr "Ongeldige Keuze" #: ../textw/xconfig_text.py:325 #, c-format msgid "" "The %s sync rate is invalid:\n" "\n" " %s\n" "\n" "A valid sync rate can be of the form:\n" "\n" " 31.5 a single number\n" " 50.1-90.2 a range of numbers\n" "31.5,35.0,39.3-40.0 a list of numbers/ranges\n" msgstr "" #: ../textw/xconfig_text.py:379 #, c-format msgid "" "Select the monitor for your system. Use the '%s' button to reset to the " "probed values." msgstr "" #: ../textw/xconfig_text.py:383 #, fuzzy msgid "Monitor:" msgstr "Beeldscherm" #: ../textw/xconfig_text.py:390 msgid "HSync Rate:" msgstr "" #: ../textw/xconfig_text.py:400 msgid "VSync Rate:" msgstr "" #: ../textw/xconfig_text.py:470 #, c-format msgid "" "Please select the video card present in your system. Choose '%s' to reset " "the selection to the card the installer detected in your system." msgstr "" #: ../textw/xconfig_text.py:488 #, fuzzy msgid "Video RAM" msgstr "Video Kaart" #: ../textw/xconfig_text.py:489 #, c-format msgid "" "Please select the amount of video RAM present on your video card. Choose '%" "s' to reset the selection to the amount the installer detected on your card." msgstr "" #: ../textw/xconfig_text.py:553 #, fuzzy msgid "Video Card Configuration" msgstr "Toetsenbord Instellingen" #: ../textw/xconfig_text.py:556 msgid "Select the video card and video RAM for your system." msgstr "" #: ../textw/xconfig_text.py:559 #, fuzzy msgid "Video Card:" msgstr "Video Kaart" #: ../textw/xconfig_text.py:564 #, fuzzy msgid "Unknown card" msgstr "Onbekend" #: ../textw/xconfig_text.py:572 msgid "Video RAM:" msgstr "" #: ../textw/xconfig_text.py:592 msgid "Unspecified video card" msgstr "" #: ../textw/xconfig_text.py:593 msgid "" "You need to pick a video card before X configuration can continue. If you " "want to skip X configuration entirely choose the 'Skip X Configuration' " "button." msgstr "" #: ../installclasses/custom.py:12 #, fuzzy msgid "Custom" msgstr "Aanpassen" #: ../installclasses/laptop.py:7 msgid "Laptop" msgstr "Laptop" #: ../installclasses/server.py:12 ../libfdisk/gnomefsedit.c:2654 #: ../libfdisk/gnomefsedit.c:2674 msgid "Server" msgstr "Server" #: ../installclasses/upgradeclass.py:8 #, fuzzy msgid "Upgrade Existing System" msgstr "Systeem Upgraden" #: ../installclasses/upgradeclass.py:12 msgid "Upgrade" msgstr "" #: ../installclasses/workstation.py:12 ../libfdisk/gnomefsedit.c:2674 msgid "Workstation" msgstr "" #: ../libfdisk/fsedit.c:401 msgid "partitioning did not meet requirements" msgstr "" #: ../libfdisk/fsedit.c:922 ../libfdisk/fsedit.c:929 ../libfdisk/fsedit.c:936 #: ../libfdisk/fsedit.c:945 ../libfdisk/fsedit.c:972 ../libfdisk/fsedit.c:985 #: ../libfdisk/fsedit.c:995 msgid "Bad Mount Point" msgstr "" #: ../libfdisk/fsedit.c:923 #, c-format msgid "The %s directory must be on the root filesystem." msgstr "" #: ../libfdisk/fsedit.c:930 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points must begin with a leading /." msgstr "" #: ../libfdisk/fsedit.c:937 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may not end with a /." msgstr "" #: ../libfdisk/fsedit.c:946 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may only printable characters." msgstr "" #: ../libfdisk/fsedit.c:954 msgid "" "You've asked to put your root (/) filesystem on a DOS-style FAT partition. " "You can do this, but you may not use any other filesystems for your Linux " "system. Additionally, there will be a speed penalty for not using Linux-" "native partitions. Do you want to continue?" msgstr "" #: ../libfdisk/fsedit.c:973 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "System partitions must be on Linux Native partitions." msgstr "" #: ../libfdisk/fsedit.c:986 #, c-format msgid "On this platform, /boot must be on a DOS-compatible filesystem %x." msgstr "" #: ../libfdisk/fsedit.c:996 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "/usr must be on a Linux Native partition or an NFS volume." msgstr "" #: ../libfdisk/fsedit.c:1024 msgid "Too Many Drives" msgstr "" #: ../libfdisk/fsedit.c:1025 msgid "" "You have more drives than this program supports. Please use the standard " "fdisk program to setup your drives and please notify Red Hat Software that " "you saw this message." msgstr "" #: ../libfdisk/fsedit.c:1034 msgid "Error Creating Device Nodes" msgstr "" #: ../libfdisk/fsedit.c:1035 msgid "" "An error has occurred while trying to create device nodes for the hard " "drives in your system. This may be because you have run out of disk space " "on the /tmp partition." msgstr "" #: ../libfdisk/fsedit.c:1053 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem." msgstr "" #: ../libfdisk/fsedit.c:1382 ../libfdisk/fsedit.c:1445 #, c-format msgid "" "An error occurred reading the partition table for the block device %s. The " "error was" msgstr "" #: ../libfdisk/fsedit.c:1385 ../libfdisk/fsedit.c:1428 #: ../libfdisk/fsedit.c:1450 ../libfdisk/fsedit.c:1456 #: ../libfdisk/fsedit.c:1463 msgid "Skip Drive" msgstr "" #: ../libfdisk/fsedit.c:1422 #, c-format msgid "" "The partition table on device %s is corrupted. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive." msgstr "" #: ../libfdisk/fsedit.c:1427 msgid "Bad Partition Table" msgstr "" #: ../libfdisk/fsedit.c:1428 msgid "Initialize" msgstr "" #: ../libfdisk/fsedit.c:1476 msgid "BSD Disklabel" msgstr "" #: ../libfdisk/fsedit.c:1476 msgid "" "A disk with a BSD disklabel has been found. The Red Hat installation only " "supports BSD Disklabels in read-only mode, so you must use a custom install " "and fdisk (instead of Disk Druid) for machines with BSD Disklabels." msgstr "" #: ../libfdisk/fsedit.c:1506 ../libfdisk/fsedit.c:1529 #: ../libfdisk/fsedit.c:1555 #, c-format msgid "System error %d" msgstr "" #: ../libfdisk/fsedit.c:1515 ../libfdisk/fsedit.c:1517 #: ../libfdisk/fsedit.c:1544 ../libfdisk/fsedit.c:1574 msgid "Fdisk Error" msgstr "" #: ../libfdisk/fsedit.c:1539 msgid "" "This occurs because the drive geometry detected by the kernel used by the " "installer is different than the drive geometry used when the drive was " "partitioned. This can be corrected by specifying the drive geometry on the " "kernel command line when booting the installer." msgstr "" #: ../libfdisk/fsedit.c:1565 msgid "" "This error has occurred because there is a logical partition on the drive " "which has a partition type of zero (0). A partition type of zero means that " "the drive's partitioning is not completely defined, and may have been caused " "by another operating system's partitioning program. This condition is not " "supported by the anaconda installer. You may be able to set the partition " "type correctly using your other operating system's partitioning program." msgstr "" #: ../libfdisk/gnomefsedit.c:551 ../libfdisk/gnomefsedit.c:952 #: ../libfdisk/gnomefsedit.c:2050 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:559 ../libfdisk/gnomefsedit.c:954 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:745 #, c-format msgid "Couldnt find partition named %s\n" msgstr "" #: ../libfdisk/gnomefsedit.c:755 ../libfdisk/gnomefsedit.c:787 msgid "Root partition" msgstr "" #: ../libfdisk/gnomefsedit.c:757 msgid "" "The growth of the root (/) RAID array appears to have been stunted by the " "1024 cylinder boot limit. If this is the case then adding a /boot partition " "(50 MB is fine) may allow the root partition to grow to fill the disk." msgstr "" #: ../libfdisk/gnomefsedit.c:789 msgid "" "The growth of the root (/) partition appears to have been stunted by the " "1024 cylinder boot limit. If this is the case then adding a /boot partition " "(50 MB is fine) may allow the root partition to grow to fill the disk." msgstr "" #: ../libfdisk/gnomefsedit.c:829 ../libfdisk/newtfsedit.c:877 msgid "Delete Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:879 ../libfdisk/newtfsedit.c:347 msgid "Cannot Edit Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:880 ../libfdisk/newtfsedit.c:348 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "edit other partitions." msgstr "" #: ../libfdisk/gnomefsedit.c:898 ../libfdisk/gnomefsedit.c:904 #: ../libfdisk/gnomefsedit.c:908 ../libfdisk/gnomefsedit.c:910 #: ../libfdisk/newtfsedit.c:371 ../libfdisk/newtfsedit.c:377 #: ../libfdisk/newtfsedit.c:381 ../libfdisk/newtfsedit.c:383 msgid "Edit Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:967 ../libfdisk/newtfsedit.c:411 msgid "Size (Megs):" msgstr "" #: ../libfdisk/gnomefsedit.c:999 msgid "Use remaining space?" msgstr "" #. give status #: ../libfdisk/gnomefsedit.c:1018 ../libfdisk/newtfsedit.c:443 #: ../libfdisk/newtfsedit.c:446 msgid "Allocation Status:" msgstr "" #: ../libfdisk/gnomefsedit.c:1022 ../libfdisk/newtfsedit.c:448 msgid "Successful" msgstr "" #: ../libfdisk/gnomefsedit.c:1025 ../libfdisk/newtfsedit.c:450 msgid "Failed" msgstr "" #: ../libfdisk/gnomefsedit.c:1037 ../libfdisk/newtfsedit.c:455 msgid "Failure Reason:" msgstr "" #: ../libfdisk/gnomefsedit.c:1051 ../libfdisk/gnomefsedit.c:2071 msgid "Partition Type:" msgstr "" #: ../libfdisk/gnomefsedit.c:1237 ../libfdisk/gnomefsedit.c:2270 #: ../libfdisk/newtfsedit.c:618 msgid "No Mount Point" msgstr "" #: ../libfdisk/gnomefsedit.c:1238 ../libfdisk/newtfsedit.c:619 msgid "" "You have not selected a mount point for this partition. Are you sure you " "want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1262 ../libfdisk/gnomefsedit.c:1299 #: ../libfdisk/gnomefsedit.c:2278 ../libfdisk/newtfsedit.c:642 #: ../libfdisk/newtfsedit.c:675 msgid "Mount Point Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1263 ../libfdisk/newtfsedit.c:643 msgid "" "You have tried to assign the '/' mount point to a FAT-style partition. You " "cannot do this now because mount points have been assigned to ext2 " "partitions also. Clear those mount points and then you will be able to " "assign '/' to this partition." msgstr "" #: ../libfdisk/gnomefsedit.c:1300 ../libfdisk/newtfsedit.c:676 msgid "" "The mount point requested is either an illegal path or is already in use. " "Please select a valid mount point." msgstr "" #: ../libfdisk/gnomefsedit.c:1333 ../libfdisk/newtfsedit.c:701 msgid "Size Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1334 ../libfdisk/newtfsedit.c:702 msgid "" "The size requested is illegal. Make sure the size is greater and zero (0), " "and is specified int decimal (base 10) format." msgstr "" #: ../libfdisk/gnomefsedit.c:1352 ../libfdisk/gnomefsedit.c:2413 #: ../libfdisk/newtfsedit.c:720 msgid "Swap Size Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1353 ../libfdisk/gnomefsedit.c:2414 #: ../libfdisk/newtfsedit.c:721 #, c-format msgid "" "You have created a swap partition which is too large. The maximum size of a " "swap partition is %ld Megabytes." msgstr "" #: ../libfdisk/gnomefsedit.c:1367 ../libfdisk/newtfsedit.c:737 #, c-format msgid "" "It is recommended that the root (/) partition have a minimum size of %ld " "Megabytes. You are trying to create one which is %ld Megabytes, which could " "cause the install to fail.\n" "\n" "Are you sure you want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1375 ../libfdisk/newtfsedit.c:745 msgid "Warning: Root FS Size" msgstr "" #: ../libfdisk/gnomefsedit.c:1387 msgid "No Drives Specified" msgstr "Geen drivers geselecteerd" #: ../libfdisk/gnomefsedit.c:1389 msgid "You must constrain this partition to at least one drive." msgstr "" #: ../libfdisk/gnomefsedit.c:1397 ../libfdisk/gnomefsedit.c:1404 msgid "No RAID Drive Constraint" msgstr "" #: ../libfdisk/gnomefsedit.c:1399 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive.\n" " Are you sure you want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1406 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive. Please select one drive to constrain this partition to." msgstr "" #: ../libfdisk/gnomefsedit.c:1526 ../libfdisk/newtfsedit.c:851 msgid "Cannot Add Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:1527 ../libfdisk/newtfsedit.c:852 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "add other partitions." msgstr "" #. XXXXX - for now destroy the raid entry since it #. now contains unallocated partitions! #: ../libfdisk/gnomefsedit.c:1601 msgid "RAID Entry Incomplete" msgstr "" #: ../libfdisk/gnomefsedit.c:1602 #, c-format msgid "" "The raid device /dev/%s now contains partitions which are unallocated. The " "raid device /dev/%s will now be decomposed into its component partitions. " "Please recompose the raid device with allocated partitions." msgstr "" #: ../libfdisk/gnomefsedit.c:1651 msgid "Cannot Remove /boot" msgstr "" #: ../libfdisk/gnomefsedit.c:1652 msgid "" "You cannot remove \"/boot\" if \"/\" is on a RAID device. Switch \"/\" to a " "non-RAID device first." msgstr "" #. build list of why they all failed #: ../libfdisk/gnomefsedit.c:1719 ../libfdisk/gnomefsedit.c:1738 #: ../libfdisk/newtfsedit.c:138 ../libfdisk/newtfsedit.c:1682 msgid "Unallocated Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:1723 ../libfdisk/gnomefsedit.c:1733 #: ../libfdisk/newtfsedit.c:142 msgid "" "There are currently unallocated partition(s) present in the list of " "requested partitions. The unallocated partition(s) are shown below, along " "with the reason they were not allocated." msgstr "" #: ../libfdisk/gnomefsedit.c:2015 msgid "Cannot Edit Raid" msgstr "" #: ../libfdisk/gnomefsedit.c:2016 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "edit RAID devices." msgstr "" #: ../libfdisk/gnomefsedit.c:2116 msgid "RAID Device: /dev/" msgstr "" #: ../libfdisk/gnomefsedit.c:2139 msgid "RAID Type:" msgstr "" #: ../libfdisk/gnomefsedit.c:2176 msgid "Partitions For RAID Array:" msgstr "" #: ../libfdisk/gnomefsedit.c:2271 msgid "You have not selected a mount point. A mount point is required." msgstr "" #: ../libfdisk/gnomefsedit.c:2279 msgid "" "The mount point requested is already in use. Please select a valid mount " "point." msgstr "" #: ../libfdisk/gnomefsedit.c:2315 msgid "" "The bootable raid device can only include partitions from the first two " "drives on your system.\n" "\n" "These drives are: " msgstr "" #: ../libfdisk/gnomefsedit.c:2322 msgid "Booting From RAID Warning" msgstr "" #: ../libfdisk/gnomefsedit.c:2332 msgid "No RAID Device" msgstr "" #: ../libfdisk/gnomefsedit.c:2333 msgid "You need to selected a RAID device." msgstr "" #: ../libfdisk/gnomefsedit.c:2339 msgid "Used Raid Device" msgstr "" #: ../libfdisk/gnomefsedit.c:2340 #, c-format msgid "" "The raid device \"/dev/%s\" is already configured as a raid device. Please " "select another." msgstr "" #: ../libfdisk/gnomefsedit.c:2353 msgid "Not Enough Partitions" msgstr "Niet genoeg partities" #: ../libfdisk/gnomefsedit.c:2355 msgid "" "You have not configured enough partitions for the RAID type you have " "selected." msgstr "" #: ../libfdisk/gnomefsedit.c:2363 msgid "Illegal /boot RAID Type" msgstr "" #: ../libfdisk/gnomefsedit.c:2365 msgid "Boot partitions (/boot) are only allowed on RAID-1." msgstr "" #: ../libfdisk/gnomefsedit.c:2373 msgid "Illegal RAID mountpoint" msgstr "" #: ../libfdisk/gnomefsedit.c:2375 msgid "" "RAID partitions cannot be mounted as root (/) on Alpha without a /boot " "partition (non-RAID) as well." msgstr "" #: ../libfdisk/gnomefsedit.c:2459 #, c-format msgid "" "The partition %s is a pre-existing partition in the set of partitions for " "this RAID device. The mount point is set to /boot. Are you sure that it is " "possible to boot from this partition?" msgstr "" #: ../libfdisk/gnomefsedit.c:2466 msgid "Use Pre-existing Partition?" msgstr "Bestaande partitie gebruiken?" #: ../libfdisk/gnomefsedit.c:2544 msgid "Cannot Add RAID Devices" msgstr "" #: ../libfdisk/gnomefsedit.c:2545 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "add RAID devices." msgstr "" #: ../libfdisk/gnomefsedit.c:2586 msgid "Auto-Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:2593 msgid "Using Existing Disk Space" msgstr "Bestaande diskruimte gebruiken" #: ../libfdisk/gnomefsedit.c:2612 msgid "Remove Linux partitions" msgstr "Linux partities verwijderen" #: ../libfdisk/gnomefsedit.c:2623 msgid "Use existing free space" msgstr "Vrije ruimte gebruiken" #. workstation or server? #: ../libfdisk/gnomefsedit.c:2635 msgid "Intended Use" msgstr "" #: ../libfdisk/gnomefsedit.c:2754 msgid "Delete RAID Device?" msgstr "RAID device verwijderen ?" #: ../libfdisk/gnomefsedit.c:2755 msgid "Are you sure you want to remove this RAID device?" msgstr "" #: ../libfdisk/gnomefsedit.c:2808 ../libfdisk/newtfsedit.c:1787 msgid "Reset Partition Table" msgstr "" #: ../libfdisk/gnomefsedit.c:2810 ../libfdisk/newtfsedit.c:1789 msgid "Reset partition table to original contents? " msgstr "De partitie tabel terugzetten naar de oorspronkelijke inhoud? " #: ../libfdisk/gnomefsedit.c:2846 ../libfdisk/gnomefsedit.c:2897 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2848 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2850 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:3134 msgid "Requested" msgstr "Gevraagd" #: ../libfdisk/gnomefsedit.c:3135 msgid "Actual" msgstr "Werkelijke" #: ../libfdisk/gnomefsedit.c:3308 msgid "Drive" msgstr "Drive" #: ../libfdisk/gnomefsedit.c:3309 msgid "Geom [C/H/S]" msgstr "Geom [C/H/S]" #: ../libfdisk/gnomefsedit.c:3310 msgid "Total (M)" msgstr "Totaal (M)" #: ../libfdisk/gnomefsedit.c:3311 msgid "Free (M)" msgstr "Beschikbaar (M)" #: ../libfdisk/gnomefsedit.c:3312 msgid "Used (M)" msgstr "Gebruikt (M)" #: ../libfdisk/gnomefsedit.c:3313 msgid "Used (%)" msgstr "Gebruikt (%)" #: ../libfdisk/gnomefsedit.c:3561 msgid "Unallocated Partitions Exist..." msgstr "Er zijn niet toegewezen partities..." #: ../libfdisk/gnomefsedit.c:3567 ../libfdisk/gnomefsedit.c:3585 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) or a " "RAID partition for the install to proceed." msgstr "" #: ../libfdisk/gnomefsedit.c:3656 msgid "Partitions" msgstr "Partities" #: ../libfdisk/gnomefsedit.c:3686 msgid "_Add..." msgstr "_Toevoegen" #: ../libfdisk/gnomefsedit.c:3693 msgid "_Edit..." msgstr "_Bewerken" #. try having make raid device button available in read-only mode too #: ../libfdisk/gnomefsedit.c:3712 msgid "_Make RAID Device" msgstr "" #: ../libfdisk/gnomefsedit.c:3722 msgid "Auto Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:3731 msgid "Drive Summary" msgstr "Drive Overzicht" #: ../libfdisk/newtfsedit.c:204 msgid "Swap Partition" msgstr "Swap Partitie" #: ../libfdisk/newtfsedit.c:210 msgid "Raid Partition" msgstr "RAID Partitie" #: ../libfdisk/newtfsedit.c:366 msgid "Edit New Partition" msgstr "Nieuwe Partitie Bewerken" #: ../libfdisk/newtfsedit.c:432 ../libfdisk/newtfsedit.c:433 msgid "Use remaining space?:" msgstr "Resterende ruimte gebruiken?:" #: ../libfdisk/newtfsedit.c:479 ../libfdisk/newtfsedit.c:480 msgid "Type:" msgstr "Type:" #: ../libfdisk/newtfsedit.c:1464 msgid "Current Disk Partitions" msgstr "" #: ../libfdisk/newtfsedit.c:1470 msgid " Mount Point Device Requested Actual Type" msgstr "" #: ../libfdisk/newtfsedit.c:1494 msgid "" " F1-Help F2-Add F3-Edit F4-Delete F5-Reset F12-Ok " msgstr "" #: ../libfdisk/newtfsedit.c:1497 msgid "Drive Summaries" msgstr "Drive overzicht" #: ../libfdisk/newtfsedit.c:1499 msgid " Drive Geom [C/H/S] Total Used Free" msgstr "" #: ../libfdisk/newtfsedit.c:1614 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) for " "the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1633 msgid "No Swap Partition" msgstr "Geen Swap Partitie" #: ../libfdisk/newtfsedit.c:1635 msgid "You must assign a swap partition for the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1661 msgid "No /boot/efi Partition" msgstr "" #: ../libfdisk/newtfsedit.c:1663 msgid "" "You must assign the mount point /boot/efi to a FAT-style primary partition " "for the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1684 msgid "" "There are unallocated partitions left. If you quit now they will not be " "written to the disk.\n" "\n" "Are you sure you want to exit?" msgstr "" #: ../libfdisk/newtfsedit.c:1700 msgid "Save Changes" msgstr "Wijzigingen Opslaan" #: ../libfdisk/newtfsedit.c:1702 msgid "Save changes to partition table(s)?" msgstr "Wijzigingen in de partitie-tabel opslaan?" #: ../libfdisk/newtfsedit.c:1747 msgid "You may only delete NFS mounts." msgstr "" #: ../loader/cdrom.c:26 msgid "Other CDROM" msgstr "" #: ../loader/cdrom.c:32 msgid "CDROM type" msgstr "CDROM type" #: ../loader/cdrom.c:32 msgid "What type of CDROM do you have?" msgstr "Welk type CDROM heeft U?" #: ../loader/cdrom.c:89 msgid "Initializing CDROM..." msgstr "" #: ../loader/devices.c:77 msgid "Miscellaneous" msgstr "Overig" #: ../loader/devices.c:86 msgid "" "This module can take parameters which affects its operation. If you don't " "know what parameters to supply, just skip this screen by pressing the \"Ok\" " "button now." msgstr "" #: ../loader/devices.c:91 msgid "Module Parameters" msgstr "" #: ../loader/devices.c:230 ../loader/devices.c:237 ../loader/devices.c:358 #: ../loader/loader.c:321 ../loader/loader.c:382 ../loader/loader.c:398 msgid "Devices" msgstr "" #: ../loader/devices.c:232 msgid "Do you have a driver disk?" msgstr "" #: ../loader/devices.c:239 msgid "Insert your driver disk and press \"Ok\" to continue." msgstr "" #: ../loader/devices.c:260 msgid "Failed to mount driver disk." msgstr "" #: ../loader/devices.c:267 msgid "" "The floppy disk you inserted is not a valid driver disk for this release of " "Red Hat Linux." msgstr "" #: ../loader/devices.c:327 msgid "" "Which driver should I try?. If the driver you need does not appear in this " "list, and you have a separate driver disk, please press F2." msgstr "" #: ../loader/devices.c:336 msgid "Specify module parameters" msgstr "" #: ../loader/devices.c:435 #, c-format msgid "Failed to insert %s module." msgstr "" #: ../loader/devices.c:481 #, c-format msgid "Failed to mount driver disk: %s." msgstr "" #: ../loader/devices.c:501 msgid "The wrong diskette was inserted." msgstr "" #: ../loader/devices.c:513 msgid "Loading" msgstr "" #: ../loader/devices.c:513 ../loader/windows.c:47 #, c-format msgid "Loading %s driver..." msgstr "" #: ../loader/devices.c:532 msgid "Driver Disk" msgstr "" #: ../loader/devices.c:533 #, c-format msgid "Please insert the %s driver disk now." msgstr "" #: ../loader/kickstart.c:58 ../loader/kickstart.c:68 ../loader/kickstart.c:107 msgid "Kickstart Error" msgstr "" #: ../loader/kickstart.c:59 #, c-format msgid "Error opening: kickstart file %s: %s" msgstr "" #: ../loader/kickstart.c:69 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "" #: ../loader/kickstart.c:108 #, c-format msgid "Error on line %d of kickstart file %s." msgstr "" #: ../loader/lang.c:40 ../loader/loader.c:186 msgid "Welcome to Red Hat Linux" msgstr "" #: ../loader/lang.c:41 ../loader/loader.c:188 msgid "" " / between elements | selects | next screen " msgstr "" #: ../loader/lang.c:298 msgid "Choose a Language" msgstr "" #: ../loader/lang.c:298 msgid "What language should be used during the installation process?" msgstr "Welke taal wilt U tijdens de installatie gebruiken?" #: ../loader/lang.c:594 msgid "Keyboard Type" msgstr "" #: ../loader/lang.c:595 msgid "What type of keyboard do you have?" msgstr "" #: ../loader/loader.c:123 msgid "Local CDROM" msgstr "" #: ../loader/loader.c:126 msgid "NFS image" msgstr "" #: ../loader/loader.c:131 msgid "Hard drive" msgstr "" #: ../loader/loader.c:308 msgid "SCSI" msgstr "" #: ../loader/loader.c:322 msgid "What kind of device would you like to add" msgstr "" #: ../loader/loader.c:371 msgid "I have found the following devices in your system:" msgstr "" #: ../loader/loader.c:373 ../loader/loader.c:398 msgid "Done" msgstr "Gereed" #: ../loader/loader.c:373 ../loader/loader.c:398 msgid "Add Device" msgstr "" #: ../loader/loader.c:399 msgid "" "I don't have any special device drivers loaded for your system. Would you " "like to load some now?" msgstr "" #: ../loader/loader.c:536 ../loader/loader.c:2143 #, c-format msgid "Failed to read directory %s: %s" msgstr "" #: ../loader/loader.c:816 msgid "Hard Drives" msgstr "" #: ../loader/loader.c:817 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" #: ../loader/loader.c:831 msgid "" "What partition and directory on that partition hold the CD (iso9660) images " "for Red Hat Linux? If you don't see the disk drive you're using listed here, " "press F2 to configure additional devices." msgstr "" #: ../loader/loader.c:845 msgid "Directory holding images:" msgstr "" #: ../loader/loader.c:865 msgid "Select Partition" msgstr "" #: ../loader/loader.c:913 #, c-format msgid "Device %s does not appear to contain Red Hat CDROM images." msgstr "" #: ../loader/loader.c:968 msgid "" "I could not find a Red Hat Linux CDROM in any of your CDROM drives. Please " "insert the Red Hat CD and press \"OK\" to retry." msgstr "" #: ../loader/loader.c:1057 msgid "Networking Device" msgstr "" #: ../loader/loader.c:1058 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "" #: ../loader/loader.c:1141 msgid "That directory does not seem to contain a Red Hat installation tree." msgstr "" #: ../loader/loader.c:1146 msgid "I could not mount that directory from the server" msgstr "" #: ../loader/loader.c:1186 #, fuzzy, c-format msgid "File %s/%s not found on server." msgstr "Bestand niet gevonden" #: ../loader/loader.c:1213 msgid "HTTP" msgstr "" #: ../loader/loader.c:1214 msgid "Unable to retrieve the first install image" msgstr "" #: ../loader/loader.c:1244 msgid "FTP and HTTP installs require 20MB or more of system memory." msgstr "" #: ../loader/loader.c:1482 msgid "Rescue Method" msgstr "" #: ../loader/loader.c:1483 msgid "Installation Method" msgstr "" #: ../loader/loader.c:1485 msgid "What type of media contains the rescue image?" msgstr "" #: ../loader/loader.c:1487 msgid "What type of media contains the packages to be installed?" msgstr "" #: ../loader/loader.c:2113 msgid "Cannot find ks.cfg on boot floppy." msgstr "" #: ../loader/loader.c:2205 msgid "Updates Disk" msgstr "" #: ../loader/loader.c:2206 msgid "Insert your updates disk and press \"OK\" to continue." msgstr "" #: ../loader/loader.c:2211 msgid "" "The floppy disk you inserted is not a valid update disk for this release of " "Red Hat Linux." msgstr "" #: ../loader/loader.c:2221 msgid "Failed to mount floppy disk." msgstr "" #. Copy everything to /tmp/updates so .so files don't get run #. from /dev/floppy. We could (and probably should) get smarter #. about this at some point. #: ../loader/loader.c:2226 msgid "Updates" msgstr "" #: ../loader/loader.c:2226 msgid "Reading anaconda updates..." msgstr "" #: ../loader/loader.c:2432 msgid "You do not have enough RAM to install Red Hat Linux on this machine." msgstr "" #: ../loader/loader.c:2920 msgid "Running anaconda - please wait...\n" msgstr "" #: ../loader/net.c:170 msgid "NFS server name:" msgstr "" #: ../loader/net.c:173 ../loader/urls.c:194 msgid "Red Hat directory:" msgstr "" #: ../loader/net.c:179 msgid "NFS Setup" msgstr "" #: ../loader/net.c:180 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your NFS server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecture" msgstr "" #: ../loader/net.c:262 msgid "Nameserver IP" msgstr "" #: ../loader/net.c:266 ../loader/net.c:804 msgid "Nameserver" msgstr "" #: ../loader/net.c:267 msgid "" "Your dynamic IP request returned IP configuration information, but it did " "not include a DNS nameserver. If you know what your nameserver is, please " "enter it now. If you don't have this information, you can leave this field " "blank and the install will continue." msgstr "" #: ../loader/net.c:277 msgid "Invalid IP Information" msgstr "Ongeldige IP Informatie" #: ../loader/net.c:278 msgid "You entered an invalid IP address." msgstr "U heeft een ongeldig IP adres ingevuld." #: ../loader/net.c:303 msgid "" "Please enter the IP configuration for this machine. Each item should be " "entered as an IP address in dotted-decimal notation (for example, 1.2.3.4)." msgstr "" #: ../loader/net.c:345 msgid "Use dynamic IP configuration (BOOTP/DHCP)" msgstr "" #: ../loader/net.c:373 msgid "Configure TCP/IP" msgstr "TCP/IP instellen" #: ../loader/net.c:404 msgid "Missing Information" msgstr "Ontbrekende Informatie" #: ../loader/net.c:405 msgid "You must enter both a valid IP address and a netmask." msgstr "U moet zowel een geldig IP adres als een netmask invullen." #: ../loader/net.c:413 ../loader/net.c:738 msgid "Dynamic IP" msgstr "Dynamisch IP adres" #: ../loader/net.c:414 ../loader/net.c:739 msgid "Sending request for IP information..." msgstr "" #: ../loader/net.c:611 msgid "Determining host name and domain..." msgstr "" #: ../loader/net.c:722 ../loader/net.c:755 msgid "kickstart" msgstr "" #: ../loader/net.c:723 #, c-format msgid "bad argument to kickstart network command %s: %s" msgstr "" #: ../loader/net.c:756 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "" #: ../loader/net.c:798 msgid "Boot protocol to use" msgstr "" #: ../loader/net.c:800 msgid "Network gateway" msgstr "Netwerk gateway" #: ../loader/net.c:802 msgid "IP address" msgstr "IP adres" #: ../loader/net.c:811 msgid "Domain name" msgstr "Domeinnaam" #: ../loader/net.c:814 msgid "Network device" msgstr "" #: ../loader/net.c:886 msgid "" " / between elements | selects | next " "screen" msgstr "" #: ../loader/net.c:887 #, c-format msgid "netconfig %s (C) 1999 Red Hat, Inc." msgstr "netconfig %s (C) 1999 Red Hat, Inc." #: ../loader/net.c:889 msgid "Network configuration" msgstr "Netwerk instellingen" #: ../loader/net.c:890 msgid "Would you like to set up networking?" msgstr "Wilt U uw netwerk instellen?" #: ../loader/pcmcia.c:34 msgid "PC Card" msgstr "PC Card" #: ../loader/pcmcia.c:35 msgid "Initializing PC Card Devices..." msgstr "" #: ../loader/pcmcia.c:104 msgid "PCMCIA" msgstr "PCMCIA" #: ../loader/pcmcia.c:105 msgid "Please insert your PCMCIA driver disk into your floppy drive now." msgstr "" #: ../loader/pcmcia.c:114 msgid "Failed to mount disk." msgstr "" #: ../loader/pcmcia.c:132 msgid "That floppy does not look like a Red Hat PCMCIA driver disk." msgstr "" #: ../loader/urls.c:80 #, c-format msgid "Failed to log into %s: %s" msgstr "" #: ../loader/urls.c:90 ../loader/urls.c:98 #, c-format msgid "Failed to retrieve %s: %s" msgstr "" #: ../loader/urls.c:103 msgid "Retrieving" msgstr "" #: ../loader/urls.c:163 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your FTP server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" #: ../loader/urls.c:172 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your web server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" #: ../loader/urls.c:190 msgid "FTP site name:" msgstr "" #: ../loader/urls.c:191 msgid "Web site name:" msgstr "" #: ../loader/urls.c:209 msgid "Use non-anonymous ftp" msgstr "" #: ../loader/urls.c:214 msgid "Use proxy server" msgstr "" #: ../loader/urls.c:226 msgid "FTP Setup" msgstr "" #: ../loader/urls.c:227 msgid "HTTP Setup" msgstr "" #: ../loader/urls.c:237 msgid "You must enter a server name." msgstr "" #: ../loader/urls.c:242 msgid "You must enter a directory." msgstr "" #: ../loader/urls.c:247 msgid "Unknown Host" msgstr "" #: ../loader/urls.c:248 #, c-format msgid "%s is not a valid hostname." msgstr "" #: ../loader/urls.c:328 msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below." msgstr "" #: ../loader/urls.c:333 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" #: ../loader/urls.c:354 msgid "Account name:" msgstr "" #: ../loader/urls.c:363 msgid "FTP Proxy:" msgstr "" #: ../loader/urls.c:364 msgid "HTTP Proxy:" msgstr "" #: ../loader/urls.c:368 msgid "FTP Proxy Port:" msgstr "" #: ../loader/urls.c:369 msgid "HTTP Proxy Port:" msgstr "" #: ../loader/windows.c:46 msgid "Loading SCSI driver" msgstr "" #: ../gnome-map/gglobe-canvas.c:24 msgid "Map Image to display" msgstr "" #: ../gnome-map/gglobe-canvas.c:25 msgid "Width of map (in pixels)" msgstr "" #: ../gnome-map/gglobe-canvas.c:26 msgid "Enable antialias" msgstr "" #: ../gnome-map/gglobe-canvas.c:100 ../gnome-map/timezonemapmodule.c:70 msgid "World" msgstr "Wereld" #: ../gnome-map/gglobe-canvas.c:101 ../gnome-map/timezonemapmodule.c:71 msgid "North America" msgstr "Noord Amerika" #: ../gnome-map/gglobe-canvas.c:102 ../gnome-map/timezonemapmodule.c:72 msgid "South America" msgstr "Zuid Amerika" #: ../gnome-map/gglobe-canvas.c:103 ../gnome-map/timezonemapmodule.c:73 msgid "Indian Rim" msgstr "" #: ../gnome-map/gglobe-canvas.c:104 ../gnome-map/timezonemapmodule.c:74 msgid "Europe" msgstr "Europa" #: ../gnome-map/gglobe-canvas.c:105 ../gnome-map/timezonemapmodule.c:75 msgid "Africa" msgstr "" #: ../gnome-map/gglobe-canvas.c:106 ../gnome-map/timezonemapmodule.c:76 msgid "Asia" msgstr "" #: ../gnome-map/gglobe-canvas.c:713 ../gnome-map/timezonemapmodule.c:698 msgid "Cannot load timezone data" msgstr "" #: ../gnome-map/gglobe-canvas.c:719 ../gnome-map/timezonemapmodule.c:731 msgid "gglobe-canvas" msgstr "" #: ../gnome-map/gglobe-canvas.c:764 msgid "View: " msgstr "" # ../comps/comps-master:3 msgid "Base" msgstr "Basis" # ../comps/comps-master:157 #, fuzzy msgid "Printing Support" msgstr "Printer Ondersteuning" # ../comps/comps-master:185 msgid "Classic X Window System" msgstr "" # ../comps/comps-master:188 msgid "X Window System" msgstr "" # ../comps/comps-master:576 msgid "Laptop Support" msgstr "Laptop Ondersteuning" # ../comps/comps-master:533 #, fuzzy msgid "Sound and Multimedia Support" msgstr "Multimedia Ondersteuning" #, fuzzy msgid "Network Support" msgstr "Netwerk Instellingen" # ../comps/comps-master:576 #, fuzzy msgid "Dialup Support" msgstr "Laptop Ondersteuning" # ../comps/comps-master:577 msgid "Messaging and Web Tools" msgstr "" # ../comps/comps-master:612 msgid "Graphics and Image Manipulation" msgstr "" # ../comps/comps-master:686 msgid "News Server" msgstr "News Server" # ../comps/comps-master:692 #, fuzzy msgid "NFS File Server" msgstr "NFS Server" # ../comps/comps-master:729 #, fuzzy msgid "Windows File Server" msgstr "Web Server" # ../comps/comps-master:712 msgid "Anonymous FTP Server" msgstr "Anoniem toegankelijke FTP Server" # ../comps/comps-master:719 #, fuzzy msgid "SQL Database Server" msgstr "SQL Database Server" # ../comps/comps-master:729 msgid "Web Server" msgstr "Web Server" #, fuzzy msgid "Router / Firewall" msgstr "Geen firewall" # ../comps/comps-master:757 msgid "DNS Name Server" msgstr "DNS Name Server" # ../comps/comps-master:582 #, fuzzy msgid "Network Managed Workstation" msgstr "Netwerk Verbinding" # ../comps/comps-master:753 msgid "Authoring and Publishing" msgstr "" # ../comps/comps-master:813 msgid "Emacs" msgstr "Emacs" # ../comps/comps-master:1006 msgid "Utilities" msgstr "" # ../comps/comps-master:576 #, fuzzy msgid "Legacy Application Support" msgstr "Laptop Ondersteuning" # ../comps/comps-master:1000 #, fuzzy msgid "Software Development" msgstr "Kernel Ontwikkeling" # ../comps/comps-master:1000 msgid "Kernel Development" msgstr "Kernel Ontwikkeling" # ../comps/comps-master:1055 msgid "Windows Compatibility / Interoperability" msgstr "" # ../comps/comps-master:1073 msgid "Games and Entertainment" msgstr "" #. generated from zone.tab msgid "Acre" msgstr "" #. generated from zone.tab msgid "Alagoas, Sergipe" msgstr "" #. generated from zone.tab msgid "Alaska Time" msgstr "" #. generated from zone.tab msgid "Alaska Time - Alaska panhandle" msgstr "" #. generated from zone.tab msgid "Alaska Time - Alaska panhandle neck" msgstr "" #. generated from zone.tab msgid "Alaska Time - west Alaska" msgstr "" #. generated from zone.tab msgid "Aleutian Islands" msgstr "" #. generated from zone.tab msgid "Amapa, E Para" msgstr "" #. generated from zone.tab msgid "Amundsen-Scott Station, South Pole" msgstr "" #. generated from zone.tab msgid "Atlantic islands" msgstr "" #. generated from zone.tab msgid "Atlantic Time - E Labrador" msgstr "" #. generated from zone.tab msgid "" "Atlantic Time - Nova Scotia (most places), NB, W Labrador, E Quebec & PEI" msgstr "" #. generated from zone.tab msgid "Atlantic Time - Nova Scotia - places that did not observe DST 1966-1971" msgstr "" #. generated from zone.tab msgid "Azores" msgstr "" #. generated from zone.tab msgid "Bayan-Olgiy, Govi-Altai, Hovd, Uvs, Zavkhan" msgstr "" #. generated from zone.tab msgid "Canary Islands" msgstr "" #. generated from zone.tab msgid "Casey Station, Bailey Peninsula" msgstr "" #. generated from zone.tab msgid "Catamarca (CT)" msgstr "" #. generated from zone.tab msgid "central Crimea" msgstr "" #. generated from zone.tab msgid "central Kazakhstan" msgstr "" #. generated from zone.tab msgid "Central Standard Time - Saskatchewan - midwest" msgstr "" #. generated from zone.tab msgid "Central Standard Time - Saskatchewan - most locations" msgstr "" #. generated from zone.tab msgid "Central Time" msgstr "" #. generated from zone.tab msgid "Central Time - Campeche, Yucatan" msgstr "" #. generated from zone.tab msgid "Central Time - Coahuila, Durango, Nuevo Leon, Tamaulipas" msgstr "" #. generated from zone.tab msgid "Central Time - Manitoba & west Ontario" msgstr "" #. generated from zone.tab msgid "Central Time - Michigan - Wisconsin border" msgstr "" #. generated from zone.tab msgid "Central Time - most locations" msgstr "" #. generated from zone.tab msgid "Central Time - Quintana Roo" msgstr "" #. generated from zone.tab msgid "Central Time - Rainy River & Fort Frances, Ontario" msgstr "" #. generated from zone.tab msgid "Central Time - west Nunavut" msgstr "" #. generated from zone.tab msgid "Ceuta & Melilla" msgstr "" #. generated from zone.tab msgid "Chatham Islands" msgstr "" #. generated from zone.tab msgid "China coast" msgstr "" #. generated from zone.tab msgid "China mountains" msgstr "" #. generated from zone.tab msgid "Davis Station, Vestfold Hills" msgstr "" #. generated from zone.tab msgid "Dornod, Sukhbaatar (unsure about this)" msgstr "" #. generated from zone.tab msgid "Dumont-d'Urville Base, Terre Adelie" msgstr "" #. generated from zone.tab msgid "E Amazonas" msgstr "" #. generated from zone.tab msgid "E Argentina (BA, DF, SC, TF)" msgstr "" #. generated from zone.tab msgid "east Dem. Rep. of Congo" msgstr "" #. generated from zone.tab msgid "Easter Island & Sala y Gomez" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - central Nunavut" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - east Nunavut" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - Crawford County" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - most locations" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - Starke County" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - Switzerland County" msgstr "" #. generated from zone.tab msgid "Eastern Standard Time - Pangnirtung, Nunavut" msgstr "" #. generated from zone.tab msgid "Eastern Time" msgstr "" #. generated from zone.tab msgid "Eastern Time - Kentucky - Louisville area" msgstr "" #. generated from zone.tab msgid "Eastern Time - Kentucky - Wayne County" msgstr "" #. generated from zone.tab msgid "Eastern Time - Michigan - most locations" msgstr "" #. generated from zone.tab msgid "Eastern Time - Ontario & Quebec - most locations" msgstr "" #. generated from zone.tab msgid "" "Eastern Time - Ontario & Quebec - places that did not observe DST 1967-1973" msgstr "" #. generated from zone.tab msgid "Eastern Time - Thunder Bay, Ontario" msgstr "" #. generated from zone.tab msgid "Eastern Turkestan" msgstr "" #. generated from zone.tab msgid "east Greenland" msgstr "" #. generated from zone.tab msgid "east Kazakhstan" msgstr "" #. generated from zone.tab msgid "east & south Borneo, Celebes, Bali, Nusa Tengarra, west Timor" msgstr "" #. generated from zone.tab msgid "east Uzbekistan" msgstr "" #. generated from zone.tab msgid "Galapagos Islands" msgstr "" #. generated from zone.tab msgid "Gambier Islands" msgstr "" #. generated from zone.tab msgid "Gilbert Islands" msgstr "" #. generated from zone.tab msgid "Great Britain" msgstr "" #. generated from zone.tab msgid "Hawaii" msgstr "" #. generated from zone.tab msgid "Irian Jaya & the Moluccas" msgstr "" #. generated from zone.tab msgid "Jan Mayen" msgstr "" #. generated from zone.tab msgid "Java & Sumatra" msgstr "" #. generated from zone.tab msgid "Johnston Atoll" msgstr "" #. generated from zone.tab msgid "Jujuy (JY)" msgstr "" #. generated from zone.tab msgid "Kosrae" msgstr "" #. generated from zone.tab msgid "Kwajalein" msgstr "" #. generated from zone.tab msgid "Line Islands" msgstr "" #. generated from zone.tab msgid "Lord Howe Island" msgstr "" #. generated from zone.tab msgid "Madeira Islands" msgstr "" #. generated from zone.tab msgid "Marquesas Islands" msgstr "" #. generated from zone.tab msgid "Mato Grosso, Mato Grosso do Sul" msgstr "" #. generated from zone.tab msgid "Mawson Station, Holme Bay" msgstr "" #. generated from zone.tab msgid "McMurdo Station, Ross Island" msgstr "" #. generated from zone.tab msgid "Mendoza (MZ)" msgstr "" #. generated from zone.tab msgid "Midway Islands" msgstr "" #. generated from zone.tab msgid "Moscow+00 - west Russia" msgstr "" #. generated from zone.tab msgid "Moscow+01 - Caspian Sea" msgstr "" #. generated from zone.tab msgid "Moscow-01 - Kaliningrad" msgstr "" #. generated from zone.tab msgid "Moscow+02 - Urals" msgstr "" #. generated from zone.tab msgid "Moscow+03 - Novosibirsk" msgstr "" #. generated from zone.tab msgid "Moscow+03 - west Siberia" msgstr "" #. generated from zone.tab msgid "Moscow+04 - Yenisei River" msgstr "" #. generated from zone.tab msgid "Moscow+05 - Lake Baikal" msgstr "" #. generated from zone.tab msgid "Moscow+06 - Lena River" msgstr "" #. generated from zone.tab msgid "Moscow+07 - Amur River" msgstr "" #. generated from zone.tab msgid "Moscow+08 - Magadan & Sakhalin" msgstr "" #. generated from zone.tab msgid "Moscow+09 - Kamchatka" msgstr "" #. generated from zone.tab msgid "Moscow+10 - Bering Sea" msgstr "" #. generated from zone.tab msgid "Mountain Standard Time - Arizona" msgstr "" #. generated from zone.tab msgid "" "Mountain Standard Time - Dawson Creek & Fort Saint John, British Columbia" msgstr "" #. generated from zone.tab msgid "Mountain Standard Time - Sonora" msgstr "" #. generated from zone.tab msgid "Mountain Time" msgstr "" #. generated from zone.tab msgid "Mountain Time - Alberta, east British Columbia & west Saskatchewan" msgstr "" #. generated from zone.tab msgid "Mountain Time - central Northwest Territories" msgstr "" #. generated from zone.tab msgid "Mountain Time - Chihuahua" msgstr "" #. generated from zone.tab msgid "Mountain Time - Navajo" msgstr "" #. generated from zone.tab msgid "Mountain Time - S Baja, Nayarit, Sinaloa" msgstr "" #. generated from zone.tab msgid "Mountain Time - south Idaho & east Oregon" msgstr "" #. generated from zone.tab msgid "Mountain Time - west Northwest Territories" msgstr "" #. generated from zone.tab msgid "NE Argentina (SF, ER, CN, MN, CC, FM, LP, CH)" msgstr "" #. generated from zone.tab msgid "NE Brazil (MA, PI, CE, RN, PR)" msgstr "" #. generated from zone.tab msgid "Newfoundland Island" msgstr "" #. generated from zone.tab msgid "New South Wales - most locations" msgstr "" #. generated from zone.tab msgid "New South Wales - Yancowinna" msgstr "" #. generated from zone.tab msgid "northeast Mali" msgstr "" #. generated from zone.tab msgid "Northern Ireland" msgstr "" #. generated from zone.tab msgid "Northern Territory" msgstr "" #. generated from zone.tab msgid "north Manchuria" msgstr "" #. generated from zone.tab msgid "northwest Greenland" msgstr "" #. generated from zone.tab msgid "Pacific Time - north Yukon" msgstr "" #. generated from zone.tab msgid "Pacific Time - south Yukon" msgstr "" #. generated from zone.tab msgid "Pacific Time - west British Columbia" msgstr "" #. generated from zone.tab msgid "Palmer Station, Anvers Island" msgstr "" #. generated from zone.tab msgid "peninsular Malaysia" msgstr "" #. generated from zone.tab msgid "Pernambuco" msgstr "" #. generated from zone.tab msgid "Phoenix Islands" msgstr "" #. generated from zone.tab msgid "Ponape (Pohnpei)" msgstr "" #. generated from zone.tab msgid "Queensland - Holiday Islands" msgstr "" #. generated from zone.tab msgid "Queensland - most locations" msgstr "" #. generated from zone.tab msgid "Roraima" msgstr "" #. generated from zone.tab msgid "Ruthenia" msgstr "" #. generated from zone.tab msgid "Sabah & Sarawak" msgstr "" #. generated from zone.tab msgid "Society Islands" msgstr "" #. generated from zone.tab #, fuzzy msgid "South Australia" msgstr "Zuid Amerika" #. generated from zone.tab msgid "southwest Greenland" msgstr "" #. generated from zone.tab msgid "southwest Mali" msgstr "" #. generated from zone.tab msgid "S & SE Brazil (BA, GO, DF, MG, ES, RJ, SP, PR, SC, RS)" msgstr "" #. generated from zone.tab msgid "Svalbard" msgstr "" #. generated from zone.tab msgid "Syowa Station, E Ongul I" msgstr "" #. generated from zone.tab msgid "Tasmania" msgstr "" #. generated from zone.tab msgid "Tibet & Xinjiang" msgstr "" #. generated from zone.tab #, fuzzy msgid "Tocantins" msgstr "Lokatie" #. generated from zone.tab msgid "Truk (Chuuk)" msgstr "" #. generated from zone.tab msgid "Victoria" msgstr "" #. generated from zone.tab msgid "Vostok Station, S Magnetic Pole" msgstr "" #. generated from zone.tab msgid "Wake Island" msgstr "" #. generated from zone.tab msgid "W Amazonas" msgstr "" #. generated from zone.tab msgid "W Argentina (CB, SA, TM, LR, SJ, SL, NQ, RN)" msgstr "" #. generated from zone.tab msgid "west & central Borneo" msgstr "" #. generated from zone.tab msgid "west Dem. Rep. of Congo" msgstr "" #. generated from zone.tab msgid "Western Australia" msgstr "" #. generated from zone.tab msgid "west Kazakhstan" msgstr "" #. generated from zone.tab msgid "west Uzbekistan" msgstr "" #. generated from zone.tab msgid "W Para, Rondonia" msgstr "" #. generated from zone.tab msgid "Yap" msgstr "" #. generated from zone.tab msgid "Zaporozh'ye, E Lugansk" msgstr "" #. generated from lang-table msgid "Chinese(Simplified)" msgstr "" #. generated from lang-table msgid "Chinese(Traditional)" msgstr "" #. generated from lang-table msgid "Czech" msgstr "" #. generated from lang-table #, fuzzy msgid "English" msgstr "Beeindigen" #. generated from lang-table #, fuzzy msgid "Danish" msgstr "Beeindigen" #. generated from lang-table msgid "French" msgstr "" #. generated from lang-table msgid "German" msgstr "" #. generated from lang-table msgid "Hungarian" msgstr "" #. generated from lang-table msgid "Icelandic" msgstr "" #. generated from lang-table msgid "Italian" msgstr "" #. generated from lang-table msgid "Japanese" msgstr "" #. generated from lang-table msgid "Korean" msgstr "" #. generated from lang-table msgid "Norwegian" msgstr "" #. generated from lang-table msgid "Portuguese" msgstr "" #. generated from lang-table #, fuzzy msgid "Romanian" msgstr "Resterend" #. generated from lang-table msgid "Russian" msgstr "" #. generated from lang-table msgid "Serbian" msgstr "" #. generated from lang-table msgid "Slovak" msgstr "" #. generated from lang-table msgid "Slovenian" msgstr "" #. generated from lang-table #, fuzzy msgid "Spanish" msgstr "Beeindigen" #. generated from lang-table msgid "Swedish" msgstr "" #. generated from lang-table msgid "Turkish" msgstr "" #. generated from lang-table msgid "Ukrainian" msgstr "" #, fuzzy #~ msgid "GRUB Password" #~ msgstr "Root Wachtwoord" #, fuzzy #~ msgid "Bootloader Password: " #~ msgstr "Root Wachtwoord:" #, fuzzy #~ msgid "Set Password" #~ msgstr "Root Wachtwoord" #, fuzzy #~ msgid "Filesystem Missing" #~ msgstr "Bestandssysteem Formateren" #, fuzzy #~ msgid "All Packages" #~ msgstr "Pakketten" #, fuzzy #~ msgid "Navigation" #~ msgstr "Partitie" #, fuzzy #~ msgid "Please enter a password for the root user." #~ msgstr "Voer het root-wachtwoord in." #~ msgid "Install Type" #~ msgstr "Installatie Type" #~ msgid "Choose the languages to install:" #~ msgstr "Kies de talen die U wilt installeren" #, fuzzy #~ msgid "You must first select an existing partition or free space to edit." #~ msgstr "U moet tenminste 1 taal kiezen" #, fuzzy #~ msgid "Automatic Disk Setup" #~ msgstr "Automatische Partitionering" #~ msgid "X Configuration" #~ msgstr "X Configuratie" #~ msgid "Bootdisk" #~ msgstr "Opstartschijf" #~ msgid "Choose the languages to be installed:" #~ msgstr "Kies de talen die geinstalleerd moeten worden" #~ msgid "Choose the default language: " #~ msgstr "Kies de standaard taal: " #, fuzzy #~ msgid "Add partition" #~ msgstr "RAID Partitie" #, fuzzy #~ msgid "Not a Partition" #~ msgstr "Geen Swap Partitie" #, fuzzy #~ msgid "Remove no partitions" #~ msgstr "Linux partities verwijderen" #~ msgid "Server System" #~ msgstr "Server Computer" #~ msgid "" #~ "The following partitions are newly created, but you have chosen not to " #~ "format them. This will probably cause an error later in the install.\n" #~ "\n" #~ msgstr "" #~ "De volgende partities zijn aangemaakt, maar U heeft er voor gekozenom " #~ "deze niet te formatteren. Dit zal een fout verder in de installatie " #~ "veroorzaken.\n" #~ "\n" #~ msgid "" #~ "\n" #~ "\n" #~ "Press OK to continue, or Cancel to go back and select these partitions to " #~ "be formatted (RECOMMENDED)." #~ msgstr "" #~ "\n" #~ "\n" #~ "Kies OK om de installatie voort te zetten, Cancel om terug te gaan en de " #~ "paritities aan te merken voor formatteren. (AANBEVOLEN)." #~ msgid "" #~ "The kernel is unable to read your new partitioning information, probably " #~ "because you modified extended partitions. While this is not critical, you " #~ "must reboot your machine before proceeding. Insert the Red Hat boot disk " #~ "now and press \"Ok\" to reboot your system.\n" #~ msgstr "" #~ "De linux kernel was niet in staat om de nieuwe partitie-informatiete " #~ "lezen, U heeft waarschijnlijk zgn 'extended partities' gewijzigd. Dit is " #~ "geen kritieke fout, maar U moet uw systeem herstarten voordat U verder " #~ "kunt gaan. Doe de Red Hat boot disk in de driver en kies \"OK\" om Uw " #~ "systeem te herstarten.\n" #, fuzzy #~ msgid "Swap Space" #~ msgstr "Schijfruimte" #, fuzzy #~ msgid "Creating swap space..." #~ msgstr "Formateren van de swappartitie /dev/%s..." #, fuzzy #~ msgid "Formatting swap space..." #~ msgstr "Formateren van de swappartitie /dev/%s..." #~ msgid "Error creating swap on device " #~ msgstr "Fout tijdens het aanmaken van de swappartitie" #~ msgid "Creating RAID devices..." #~ msgstr "Aanmaken van RAID partities.." #~ msgid "Creating loopback filesystem on device /dev/%s..." #~ msgstr "Aanmaken van het loopback bestandssysteem op apparaat /dev/%s..." #~ msgid "Finish" #~ msgstr "Beeindigen" #~ msgid "Red Hat Linux Install Shell" #~ msgstr "Red Hat Linux Installatie shell" #, fuzzy #~ msgid "Red Hat Linux Install Shell on %s" #~ msgstr "Red Hat Linux Installatie Shell op %s" #~ msgid "WARNING: no valid block devices were found.\n" #~ msgstr "WAARSCHUWING: er zijn geen bruikbare (hard)disks gevonden.\n" #~ msgid "ERROR: unknown error encountered reading partition tables.\n" #~ msgstr "" #~ "FOUT: er is een onbekende fout opgetreden bij het lezen van de partitie " #~ "tabel.\n" #~ msgid "Upgrade Existing Installation" #~ msgstr "Een bestaande installatie upgraden" #~ msgid "Unlisted Card" #~ msgstr "Onbekende kaart" #~ msgid "Video Card Selection" #~ msgstr "Videokaart keuze" #~ msgid "Which video card do you have?" #~ msgstr "Welke videokaart heeft Uw computer?" #~ msgid "X Server Selection" #~ msgstr "X Server Keuze" #~ msgid "Choose a server" #~ msgstr "Kies een server" #~ msgid "Hostname Setup" #~ msgstr "Machinenaam Instelling" #~ msgid "Language Default" #~ msgstr "Standaard Taal" #~ msgid "Time Zone Setup" #~ msgstr "Tijdzone Keuze" #~ msgid "Configuration Complete" #~ msgstr "Configuratie Voltooid" #~ msgid "LILO Configuration" #~ msgstr "LILO Configuratie" #~ msgid "Manually Partition" #~ msgstr "Handmatig Partitioneren" #~ msgid "Swap" #~ msgstr "Swap" #~ msgid "Boot Partition Warning" #~ msgstr "Boot Partitie Waarschuwing" #~ msgid "Package Groups" #~ msgstr "Pakket Groepen" #~ msgid "Individual Packages" #~ msgstr "Individuele Pakketten" #~ msgid "Installation Begins" #~ msgstr "De installatie begint" #~ msgid "Examine System" #~ msgstr "Systeem Onderzoeken" #, fuzzy #~ msgid "System Swap Space" #~ msgstr "Systeem om te upgraden" #~ msgid "Customize Upgrade" #~ msgstr "Upgrade Aanpassen" #~ msgid "Upgrade Begins" #~ msgstr "De upgrade begint" #~ msgid "Upgrade Complete" #~ msgstr "Upgrade Voltooid" #~ msgid "Plug and Play Monitor" #~ msgstr "Plug en Play Beeldscherm" #~ msgid "Lilo Configuration" #~ msgstr "Lilo Instellingen" #~ msgid "Use linear mode (needed for some SCSI drives)" #~ msgstr "'linear mode' gebruiken (nodig voor een aantal SCSI apparaten)" #~ msgid "Install LILO" #~ msgstr "LILO Installeren" #~ msgid "Automatic Partitioning Failed" #~ msgstr "Automatisch Partitioneren is mislukt" #~ msgid "Manual Partitioning" #~ msgstr "Handmatig Partitioneren" #, fuzzy #~ msgid "Skip LILO" #~ msgstr "Overslaan" #~ msgid "" #~ "To install Red Hat Linux, you must have at least one partition of 150 MB " #~ "dedicated to Linux. We suggest placing that partition on one of the first " #~ "two hard drives in your system so you can boot into Linux with LILO." #~ msgstr "" #~ "Om Red Hat Linux to installeren moet U een partitie van tenminste 150 MB " #~ "speciaal voor Linux reserveren. We raden U aan om deze partitie op een " #~ "van de eerste twee harddisks te plaatsen, zodat U LILO kunt gebruiken om " #~ "Linux op te starten." #~ msgid "Continue" #~ msgstr "Doorgaan" #~ msgid "Manually partition" #~ msgstr "Partities handmatig instellen" #~ msgid "Choose Partitions to Format" #~ msgstr "Kies de partities die U wilt formatteren" # ../comps/comps-master:505 #~ msgid "Games" #~ msgstr "Spelletjes" # ../comps/comps-master:645 #~ msgid "Dialup Workstation" #~ msgstr "Inbel Verbindingen" # ../comps/comps-master:705 #~ msgid "IPX/Netware(tm) Connectivity" #~ msgstr "Netware(tm) Connectivity" # ../comps/comps-master:833 #~ msgid "Development" #~ msgstr "Software Ontwikkeling" #, fuzzy #~ msgid "Going to upgrade partition /dev/" #~ msgstr "RAID Partitie"