# SOME DESCRIPTIVE TITLE. # Copyright (C) 1999 Red Hat Partner - Sistemi Srl. # Federico Musto 1999 # msgid "" msgstr "" "Project-Id-Version: 1.0\n" "POT-Creation-Date: 1999-09-17 14:05-0400\n" "PO-Revision-Date: 1999-04-08 18:15+1\n" "Last-Translator: Federico Musto \n" "Language-Team: ITALIAN \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8959-1\n" "Content-Transfer-Encoding: ascii\n" #: ../iw/language.py:10 ../text.py:39 ../text.py:821 msgid "Language Selection" msgstr "Scelta della lingua" #: ../text.py:40 #, fuzzy msgid "What language would you like to use during the installation process?" msgstr "Quale lingua desiderate utilizzare durante l'installazione ?" #: ../loader/cdrom.c:34 ../loader/devices.c:58 ../loader/devices.c:134 #: ../loader/kickstart.c:57 ../loader/kickstart.c:67 ../loader/kickstart.c:106 #: ../loader/lang.c:247 ../loader/lang.c:503 ../loader/loader.c:241 #: ../loader/loader.c:456 ../loader/loader.c:466 ../loader/loader.c:613 #: ../loader/loader.c:668 ../loader/loader.c:713 ../loader/loader.c:846 #: ../loader/loader.c:851 ../loader/loader.c:937 ../loader/loader.c:1070 #: ../loader/loader.c:1460 ../loader/net.c:162 ../loader/net.c:284 #: ../loader/net.c:559 ../loader/urls.c:124 ../loader/urls.c:201 #: ../loader/urls.c:206 ../loader/urls.c:322 ../text.py:42 ../text.py:90 #: ../text.py:141 ../text.py:167 ../text.py:208 ../text.py:253 ../text.py:343 #: ../text.py:363 ../text.py:394 ../text.py:438 ../text.py:460 ../text.py:525 #: ../text.py:545 ../text.py:557 ../text.py:569 ../text.py:747 ../text.py:790 #: ../text.py:794 ../textw/lilo.py:20 ../textw/lilo.py:64 #: ../textw/packages.py:22 ../textw/packages.py:87 ../textw/packages.py:138 #: ../textw/partitioning.py:184 ../textw/userauth.py:31 #: ../textw/userauth.py:45 ../textw/userauth.py:50 ../textw/userauth.py:84 #: ../textw/userauth.py:96 ../textw/userauth.py:104 ../textw/userauth.py:113 #: ../textw/userauth.py:174 ../textw/userauth.py:246 msgid "OK" msgstr "OK" #: ../text.py:54 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "/dev/ttyS0 (COM1 sotto DOS)" #: ../text.py:55 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "/dev/ttyS1 (COM2 sotto DOS)" #: ../text.py:56 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "/dev/ttyS2 (COM3 sotto DOS)" #: ../text.py:57 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "/dev/ttyS3 (COM4 sotto DOS)" #: ../iw/lilo.py:174 ../text.py:72 ../textw/lilo.py:77 ../textw/lilo.py:135 msgid "Device" msgstr "Device" #: ../text.py:73 #, c-format msgid "What device is your mouse located on? %s %i" msgstr "" #. code to create dialog in gtk+ #: ../libfdisk/fsedit.c:605 ../libfdisk/fsedit.c:612 ../libfdisk/fsedit.c:619 #: ../libfdisk/fsedit.c:628 ../libfdisk/fsedit.c:640 ../libfdisk/fsedit.c:650 #: ../libfdisk/fsedit.c:679 ../libfdisk/fsedit.c:695 ../libfdisk/fsedit.c:1048 #: ../libfdisk/gnomefsedit.c:655 ../libfdisk/gnomefsedit.c:1000 #: ../libfdisk/gnomefsedit.c:1026 ../libfdisk/gnomefsedit.c:1062 #: ../libfdisk/gnomefsedit.c:1267 ../libfdisk/gnomefsedit.c:1361 #: ../libfdisk/gnomefsedit.c:1379 ../libfdisk/gnomefsedit.c:1619 #: ../libfdisk/gnomefsedit.c:1846 ../libfdisk/gnomefsedit.c:1854 #: ../libfdisk/gnomefsedit.c:1868 ../libfdisk/gnomefsedit.c:1879 #: ../libfdisk/gnomefsedit.c:1886 ../libfdisk/gnomefsedit.c:1901 #: ../libfdisk/gnomefsedit.c:1910 ../libfdisk/gnomefsedit.c:1967 #: ../libfdisk/gnomefsedit.c:2128 ../libfdisk/newtfsedit.c:116 #: ../libfdisk/newtfsedit.c:449 ../libfdisk/newtfsedit.c:527 #: ../libfdisk/newtfsedit.c:545 ../libfdisk/newtfsedit.c:581 #: ../libfdisk/newtfsedit.c:1297 ../libfdisk/newtfsedit.c:1305 #: ../libfdisk/newtfsedit.c:1430 ../libfdisk/newtfsedit.c:1451 #: ../libfdisk/newtfsedit.c:1545 ../text.py:74 ../text.py:472 #: ../textw/constants.py:10 ../textw/lilo.py:82 ../textw/lilo.py:95 #: ../textw/lilo.py:144 msgid "Ok" msgstr "Ok" #: ../gui.py:316 ../libfdisk/fsedit.c:955 ../libfdisk/newtfsedit.c:1297 #: ../libfdisk/newtfsedit.c:1305 ../loader/cdrom.c:34 ../loader/devices.c:58 #: ../loader/devices.c:134 ../loader/lang.c:503 ../loader/loader.c:241 #: ../loader/loader.c:577 ../loader/loader.c:613 ../loader/loader.c:713 #: ../loader/loader.c:1070 ../loader/net.c:162 ../loader/net.c:284 #: ../loader/urls.c:124 ../loader/urls.c:322 ../text.py:74 ../text.py:75 #: ../text.py:90 ../text.py:113 ../text.py:141 ../text.py:144 ../text.py:167 #: ../text.py:194 ../text.py:208 ../text.py:210 ../text.py:229 ../text.py:231 #: ../text.py:253 ../text.py:255 ../text.py:343 ../text.py:394 ../text.py:396 #: ../text.py:415 ../text.py:424 ../text.py:438 ../text.py:440 ../text.py:460 #: ../text.py:463 ../text.py:472 ../text.py:525 ../text.py:526 ../text.py:747 #: ../text.py:769 ../textw/constants.py:10 ../textw/lilo.py:21 #: ../textw/lilo.py:64 ../textw/lilo.py:71 ../textw/lilo.py:145 #: ../textw/packages.py:22 ../textw/packages.py:87 ../textw/packages.py:138 #: ../textw/packages.py:147 ../textw/partitioning.py:27 #: ../textw/partitioning.py:64 ../textw/partitioning.py:184 #: ../textw/userauth.py:31 ../textw/userauth.py:143 ../textw/userauth.py:174 #: ../textw/userauth.py:246 msgid "Back" msgstr "Indietro" #: ../text.py:92 msgid "Which model mouse is attached to this computer?" msgstr "Quale modello di mouse possedete ?" #: ../text.py:101 msgid "Emulate 3 Buttons?" msgstr "Emulazione 3 pulsanti ?" #: ../text.py:103 #, fuzzy msgid "Mouse Selection" msgstr "Tipo di mouse" #: ../text.py:139 ../text.py:823 #, fuzzy msgid "Keyboard Selection" msgstr "Tipo di tastiera" #: ../text.py:140 msgid "Which model keyboard is attached to this computer?" msgstr "Quale modello di tastiera possedete ?" #: ../text.py:160 #, fuzzy msgid "Install GNOME Workstation" msgstr "Installazione di GNOME Workstation" #: ../text.py:161 #, fuzzy msgid "Install KDE Workstation" msgstr "Installazione di KDE Workstation" #: ../text.py:162 #, fuzzy msgid "Install Server System" msgstr "Installazione del sistema server" #: ../text.py:163 #, fuzzy msgid "Install Custom System" msgstr "Installazione del sistema Custom" #: ../text.py:164 #, fuzzy msgid "Upgrade Existing Installation" msgstr "Aggiornamento dell'installazione esistente" #: ../text.py:165 ../text.py:826 #, fuzzy msgid "Installation Type" msgstr "Tipo di installazione" #: ../text.py:166 #, fuzzy msgid "What type of system would you like to install?" msgstr "Quale tipo di sistema desiderate installare ?" #: ../libfdisk/newtfsedit.c:1545 ../loader/loader.c:456 ../loader/loader.c:466 #: ../loader/loader.c:668 ../loader/loader.c:713 ../loader/loader.c:846 #: ../loader/loader.c:851 ../loader/loader.c:1460 ../loader/urls.c:201 #: ../loader/urls.c:206 ../text.py:191 ../text.py:565 msgid "Error" msgstr "Errore" #: ../text.py:192 msgid "You don't have any Linux partitions. You can't upgrade this system!" msgstr "Non esistono partizioni Linux. Impossibile aggiornare il sistema !" #: ../text.py:205 #, fuzzy msgid "System to Upgrade" msgstr "Sistema da aggiornare" #: ../text.py:206 msgid "What partition holds the root partition of your installation?" msgstr "" "Quale partizione contiene la partizione root della vostra installazione?" #: ../text.py:221 #, fuzzy msgid "Customize Packages to Upgrade" msgstr "Scelta dei pacchetti da installare" #: ../text.py:222 msgid "" "The packages you have installed, and any other packages which are needed to " "satisfy their dependencies, have been selected for installation. Would you " "like to customize the set of packages that will be upgraded?" msgstr "" "I pacchetti che avete selezionato, e quelli necessari per soddisfare le " "dipendenze sono stati selezionati. Volete modificare qualcosa ?" #: ../libfdisk/gnomefsedit.c:580 ../libfdisk/gnomefsedit.c:956 #: ../libfdisk/gnomefsedit.c:1080 ../libfdisk/gnomefsedit.c:2020 #: ../libfdisk/gnomefsedit.c:2290 ../libfdisk/gnomefsedit.c:2343 #: ../libfdisk/newtfsedit.c:486 ../libfdisk/newtfsedit.c:697 #: ../libfdisk/newtfsedit.c:1483 ../libfdisk/newtfsedit.c:1501 #: ../libfdisk/newtfsedit.c:1586 ../loader/loader.c:577 ../loader/net.c:698 #: ../text.py:229 ../text.py:415 ../text.py:418 ../textw/partitioning.py:147 msgid "Yes" msgstr "Si" #: ../libfdisk/gnomefsedit.c:580 ../libfdisk/gnomefsedit.c:956 #: ../libfdisk/gnomefsedit.c:1080 ../libfdisk/gnomefsedit.c:2020 #: ../libfdisk/gnomefsedit.c:2290 ../libfdisk/gnomefsedit.c:2343 #: ../libfdisk/newtfsedit.c:486 ../libfdisk/newtfsedit.c:697 #: ../libfdisk/newtfsedit.c:1483 ../libfdisk/newtfsedit.c:1501 #: ../libfdisk/newtfsedit.c:1586 ../loader/net.c:698 ../text.py:229 #: ../text.py:234 ../text.py:415 ../text.py:421 ../textw/partitioning.py:147 msgid "No" msgstr "No" #: ../text.py:244 #, fuzzy msgid "Red Hat Linux" msgstr "Red Hat Linux" #: ../text.py:245 #, fuzzy msgid "" "Welcome to Red Hat Linux!\n" "\n" "This installation process is outlined in detail in the Official Red Hat " "Linux Installation Guide available from Red Hat Software. If you have access " "to this manual, you should read the installation section before continuing.\n" "\n" "If you have purchased Official Red Hat Linux, be sure to register your " "purchase through our web site, http://www.redhat.com/." msgstr "" "Benvenuti in Red Hat Linux !\n" "\n" "Il processo di installazione e' spiegato in dettaglio nella guidaufficiale " "Red Hat fornita dalla Red Hat Software. Vi consigliamo dileggere il manuale " "prima di continuare.\n" "\n" "Se avete comprato la versione ufficiale di Red Hat Linux, registratevi " "viaweb http://www.redhat.it.\n" "Grazie per aver scelto Red Hat Linux !\n" #: ../text.py:315 msgid "Use bootp/dhcp" msgstr "Utilizzo bootp/dhcp" #: ../loader/net.c:234 ../text.py:320 msgid "IP address:" msgstr "Indirizzo IP:" #: ../loader/net.c:237 ../text.py:321 msgid "Netmask:" msgstr "Netmask:" #: ../loader/net.c:240 ../text.py:322 msgid "Default gateway (IP):" msgstr "Default gateway (IP):" #: ../loader/net.c:243 ../text.py:323 msgid "Primary nameserver:" msgstr "Nameserver primario:" #: ../text.py:345 msgid "Network Configuration" msgstr "Configurazione della rete" #: ../text.py:361 #, fuzzy msgid "Invalid information" msgstr "Informazione non corretta" #: ../text.py:362 #, fuzzy msgid "You must enter valid IP information to continue" msgstr "E' necessario inserire un indirizzo IP valido ed il relativo netmask." #: ../text.py:390 #, fuzzy msgid "Hostname Configuration" msgstr "Configurazione Hostname" #: ../text.py:391 msgid "" "The hostname is the name of your computer. If your computer is attached to " "a network, this may be assigned by your network administrator." msgstr "" "L'hostname e' il nome del computer. Se il vostro computer e' connesso ad\n" "una rete, l'hostname viene normalmente assegnato dall'amministratore\n" "della rete." #: ../iw/network.py:187 ../loader/net.c:460 ../loader/net.c:617 ../text.py:394 msgid "Hostname" msgstr "Hostname" #: ../text.py:405 ../text.py:553 ../text.py:878 msgid "Bootdisk" msgstr "Bootdisk" #: ../text.py:406 msgid "" "A custom bootdisk provides a way of booting into your Linux system without " "depending on the normal bootloader. This is useful if you don't want to " "install lilo on your system, another operating system removes lilo, or lilo " "doesn't work with your hardware configuration. A custom bootdisk can also be " "used with the Red Hat rescue image, making it much easier to recover from " "severe system failures.\n" "\n" "Would you like to create a bootdisk for your system?" msgstr "" "Un custom bootdisk vi permette di caricare il vostro sistema Red Hat Linux " "senza dipendere dal normale bootloader. Questo e' utile se non volete " "installare LILO, o se un altro sistema operativo o il vostro hardware non vi " "permette di usare LILO. Un custom bootdisk puo' essere usato anche come " "immagine del disco Red Hat rescue, permettendo di ripristinare piu' " "facilmente un server danneggiato.\n" "\n" "Volete creare un bootdisk per il vostro sistema ?" #: ../text.py:436 #, fuzzy msgid "X probe results" msgstr "Rilevazione automatica" #: ../text.py:449 ../text.py:468 msgid "Unlisted Card" msgstr "Scheda non supportata" #: ../text.py:457 #, fuzzy msgid "Video Card Selection" msgstr "Scelta della scheda video" #: ../text.py:458 #, fuzzy msgid "Which video card do you have?" msgstr "Che tipo di scheda video avete?" #: ../text.py:470 #, fuzzy msgid "X Server Selection" msgstr "Scelta dell'X Server" #: ../text.py:470 #, fuzzy msgid "Choose a server" msgstr "Scelta del server" #: ../text.py:521 #, fuzzy msgid "Installation to begin" msgstr "Passi dell'installazione" #: ../text.py:522 msgid "" "A complete log of your installation will be in /tmp/install.log after " "rebooting your system. You may want to keep this file for later reference." msgstr "" "Un file di log della vostra installazione verra' memorizzato in " "/tmp/install.log dopo il reboot del vostro sistema. Potete consultare questo " "file per controllare la vostra installazione." #: ../text.py:537 msgid "Complete" msgstr "Completo" #: ../iw/congrats.py:17 ../text.py:538 msgid "" "Congratulations, installation is complete.\n" "\n" "Remove the boot media and press return to reboot. For information on fixes " "which are available for this release of Red Hat Linux, consult the Errata " "available from http://www.redhat.com.\n" "\n" "Information on configuring your system is available in the post install " "chapter of the Official Red Hat Linux User's Guide." msgstr "" "Congratulazioni, l'installazione e' completa.\n" "\n" "Rimuovete il supporto e premete return per il reboot. Per maggiori " "informazioni su questa release di Red Hat Linux, consultate l'Errata sul " "sito http://www.redhat.it.\n" "\n" "Le informazioni sulla configurazione sono disponibili nel capitolo " "post-installazione nella guida ufficiale di Red Hat Linux per l'utente, " "versione italiana." #: ../iw/bootdisk.py:41 ../text.py:554 msgid "" "Insert a blank floppy in the first floppy drive. All data on this disk will " "be erased during creation of the boot disk." msgstr "" "Inserite un dischetto vuoto ma gia' formattato nel primo floppy. Tutti i " "dati presenti sul dischetto vengono cancellati durante la creazione del " "disco di boot." #: ../text.py:557 ../text.py:558 ../text.py:569 ../text.py:570 #: ../textw/lilo.py:20 msgid "Skip" msgstr "Salta" #: ../iw/bootdisk.py:45 ../text.py:566 msgid "" "An error occured while making the boot disk. Please make sure that there is " "a formatted floppy in the first floppy drive." msgstr "" "Errore durante la creazione del disco di boot. Assicuratevi di aver inserito " "un disco gia' formattato nel primo floppy." #: ../text.py:628 #, fuzzy msgid "Package Installation" msgstr "Installazione dei pacchetti" #: ../text.py:630 #, fuzzy msgid "Name : " msgstr "Nome :" #: ../text.py:631 #, fuzzy msgid "Size : " msgstr "Dimen. :" #: ../text.py:632 msgid "Summary: " msgstr "Riassunto:" #: ../text.py:658 #, fuzzy msgid " Packages" msgstr " Pacchetto" #: ../text.py:659 msgid " Bytes" msgstr "" #: ../text.py:660 msgid " Time" msgstr "" #: ../text.py:662 msgid "Total :" msgstr "Totale :" #: ../text.py:669 #, fuzzy msgid "Completed: " msgstr "Completo: " #: ../text.py:679 msgid "Remaining: " msgstr "Rimanente: " #: ../text.py:749 msgid "What time zone are you located in?" msgstr "Quale e' il vostro fuso orario ?" #: ../text.py:757 msgid "Hardware clock set to GMT?" msgstr "Configurazione Hardware clock al GMT?" #: ../iw/timezone.py:29 ../text.py:759 msgid "Time Zone Selection" msgstr "Scelta del fuso orario" #: ../text.py:794 ../text.py:795 msgid "Debug" msgstr "Debug" #: ../text.py:807 msgid "Red Hat Linux (C) 1999 Red Hat, Inc." msgstr "" #: ../text.py:809 #, fuzzy msgid "" " / between elements | selects | next " "screen" msgstr "" " / tra elementi | seleziona | successivo " #: ../text.py:825 msgid "Welcome" msgstr "Benvenuti" #: ../iw/lilo.py:94 ../iw/lilo.py:197 ../text.py:831 ../text.py:837 #, fuzzy msgid "Partition" msgstr "Partizione" #: ../text.py:833 #, fuzzy msgid "Manually Partition" msgstr "Partizionamento manuale" #: ../text.py:835 #, fuzzy msgid "Automatic Partition" msgstr "Partizionamento automatico" #: ../text.py:839 msgid "Swap" msgstr "" #: ../text.py:841 #, fuzzy msgid "Filesystem Formatting" msgstr "Formattazione Filesystem" #: ../text.py:843 ../text.py:845 ../text.py:847 ../textw/lilo.py:23 #: ../textw/lilo.py:61 ../textw/lilo.py:152 #, fuzzy msgid "LILO Configuration" msgstr "Configurazione di LILO" #: ../text.py:849 #, fuzzy msgid "Hostname Setup" msgstr "Hostname Setup" #: ../text.py:851 #, fuzzy msgid "Network Setup" msgstr "Network Setup" #: ../text.py:853 ../text.py:855 #, fuzzy msgid "Mouse Configuration" msgstr "Configurazione del mouse" #: ../text.py:857 msgid "Time Zone Setup" msgstr "Setup del fuso orario" #: ../text.py:859 ../textw/userauth.py:10 msgid "Root Password" msgstr "Password di root" #: ../text.py:861 ../textw/userauth.py:150 msgid "User Account Setup" msgstr "Setup dell'account" #: ../text.py:863 #, fuzzy msgid "Authentication" msgstr "Autenticazione" #: ../text.py:865 #, fuzzy msgid "Package Groups" msgstr "Gruppi di pacchetti" #: ../text.py:867 ../text.py:888 #, fuzzy msgid "Individual Packages" msgstr "Scelta individuale dei pacchetti" #: ../text.py:869 ../textw/packages.py:116 #, fuzzy msgid "Package Dependencies" msgstr "Dipendenze non risolte" #: ../iw/xconfig.py:91 ../text.py:871 ../text.py:879 #, fuzzy msgid "X Configuration" msgstr "Configurazione X" #: ../text.py:873 #, fuzzy msgid "Boot Disk" msgstr "Boot Disk" #: ../text.py:875 #, fuzzy msgid "Installation Begins" msgstr "Passi dell'installazione" #: ../text.py:877 #, fuzzy msgid "Install System" msgstr "Installazione del sistema" #: ../text.py:881 #, fuzzy msgid "Installation Complete" msgstr "Installazione completa" #: ../text.py:886 msgid "Examine System" msgstr "" #: ../text.py:887 msgid "Customize Upgrade" msgstr "Aggiornamento personalizzato" #: ../text.py:889 #, fuzzy msgid "Upgrade System" msgstr "Aggiornamento del sistema" #: ../text.py:890 #, fuzzy msgid "Upgrade Complete" msgstr "Aggiornamento completatato" #: ../gui.py:310 msgid "Red Hat Linux Installer" msgstr "" #: ../gui.py:319 msgid "Finish" msgstr "Fine" #: ../gui.py:320 msgid "Hide Help" msgstr "Nascondi Help" #: ../gui.py:321 msgid "Show Help" msgstr "Mostra l'Help" #: ../gui.py:343 msgid "Online Help" msgstr "Help online" #: ../iw/account.py:14 #, fuzzy msgid "Account Configuration" msgstr "Configurazione Account" #: ../iw/account.py:129 #, fuzzy msgid "Root Password: " msgstr "Password di root" #: ../iw/account.py:132 #, fuzzy msgid "Confirm: " msgstr "Conferma:" #: ../iw/account.py:183 ../iw/account.py:226 #, fuzzy msgid "Account Name" msgstr "Nome di account:" #: ../iw/account.py:187 ../textw/userauth.py:82 #, fuzzy msgid "Password" msgstr "Password:" #: ../iw/account.py:191 ../textw/userauth.py:83 #, fuzzy msgid "Password (confirm)" msgstr "Password (di nuovo):" #: ../iw/account.py:195 ../iw/account.py:226 ../textw/userauth.py:81 #: ../textw/userauth.py:162 msgid "Full Name" msgstr "Nome completo" #: ../iw/account.py:204 ../libfdisk/newtfsedit.c:1303 ../textw/userauth.py:173 msgid "Add" msgstr "Aggiungi" #: ../iw/account.py:206 ../libfdisk/newtfsedit.c:1296 #: ../libfdisk/newtfsedit.c:1304 ../textw/lilo.py:144 ../textw/lilo.py:165 #: ../textw/partitioning.py:63 ../textw/userauth.py:174 msgid "Edit" msgstr "Modifica" #: ../iw/account.py:208 ../libfdisk/newtfsedit.c:1296 #: ../libfdisk/newtfsedit.c:1304 ../textw/userauth.py:173 msgid "Delete" msgstr "Cancella" #: ../iw/account.py:210 msgid "New" msgstr "" #: ../iw/auth.py:11 ../textw/userauth.py:248 #, fuzzy msgid "Authentication Configuration" msgstr "Configurazione della rete" #: ../iw/auth.py:50 msgid "Enable MD5 passwords" msgstr "Attivazione password MD5" #: ../iw/auth.py:51 #, fuzzy msgid "Enable shadow passwords" msgstr "Attivazione delle shadow password" #: ../iw/auth.py:53 ../textw/userauth.py:253 msgid "Enable NIS" msgstr "Attivazione NIS" #: ../iw/auth.py:54 msgid "Use broadcast to find NIS server" msgstr "Usa broadcast per trovare il server NIS" #: ../iw/auth.py:66 msgid "NIS Domain: " msgstr "Dominio NIS:" #: ../iw/auth.py:68 #, fuzzy msgid "NIS Server: " msgstr "Server NIS:" #: ../iw/bootdisk.py:10 #, fuzzy msgid "Bootdisk Creation" msgstr "Creazione del disco di avvio" #: ../iw/bootdisk.py:52 msgid "Skip boot disk creation" msgstr "Salta la creazione del disco di boot" #: ../iw/congrats.py:11 #, fuzzy msgid "Congratulations" msgstr "Congratulazioni" #: ../iw/congrats.py:13 #, fuzzy msgid "Exit" msgstr "Esci" #: ../iw/dependencies.py:9 msgid "Unresolved Dependencies" msgstr "Dipendenze non risolte" #: ../iw/dependencies.py:30 ../iw/progress.py:113 ../textw/packages.py:123 msgid "Package" msgstr "Pacchetto" #: ../iw/dependencies.py:30 ../textw/packages.py:123 msgid "Requirement" msgstr "Richiesto" #: ../iw/dependencies.py:37 ../textw/packages.py:135 msgid "Install packages to satisfy dependencies" msgstr "Installa i pacchetti per soddisfare le dipendenze" #: ../iw/examine.py:10 #, fuzzy msgid "Upgrade Examine" msgstr "Aggiornamento" #: ../iw/examine.py:34 #, fuzzy msgid "" "You don't have any Linux partitions.\n" " You can't upgrade this sytem!" msgstr "" "Non avete nessuna partizione Linux.\n" "Non e' possibile aggiornare il sistema !" #: ../iw/examine.py:52 #, fuzzy msgid "Customize packages to be upgraded" msgstr "Scelta dei pacchetti da aggiornare" #: ../iw/fdisk.py:12 ../textw/partitioning.py:26 msgid "fdisk" msgstr "fdisk" #: ../iw/fdisk.py:43 #, fuzzy msgid "Select drive to run fdisk on" msgstr "Selezionare la connesione della stampante" #: ../iw/format.py:12 #, fuzzy msgid "Choose partitions to Format" msgstr "Scelta delle partizioni da formattare" #: ../iw/format.py:47 #, fuzzy msgid "Check for bad blocks while formatting" msgstr "Controllo bad block durante la formattazione" #: ../iw/installpath.py:35 #, fuzzy msgid "GNOME Workstation" msgstr "Workstation GNOME" #: ../iw/installpath.py:37 #, fuzzy msgid "KDE Workstation" msgstr "Workstation KDE" #: ../iw/installpath.py:39 ../libfdisk/gnomefsedit.c:2196 #: ../libfdisk/gnomefsedit.c:2216 msgid "Server" msgstr "Server" #: ../iw/installpath.py:40 msgid "Custom" msgstr "Custom" #: ../iw/installpath.py:76 #, fuzzy msgid "Install Type" msgstr "Tipo di installazione" #: ../iw/installpath.py:144 msgid "Install" msgstr "Installazione" #: ../iw/installpath.py:146 msgid "Upgrade" msgstr "Aggiornamento" #: ../iw/installpath.py:185 msgid "Use fdisk to format drives" msgstr "" #: ../iw/keyboard.py:12 #, fuzzy msgid "Keyboard Configuration" msgstr "Configurazione della tastiera" #: ../iw/keyboard.py:45 msgid "Model" msgstr "Modello" #: ../iw/keyboard.py:62 msgid "Layout" msgstr "" #: ../iw/keyboard.py:79 msgid "Variant" msgstr "Variante" #: ../iw/keyboard.py:95 #, fuzzy msgid "Test your selection here:" msgstr "Tipo di tastiera" #: ../iw/language.py:14 ../loader/lang.c:245 msgid "What language should be used during the installation process?" msgstr "Che lingua desiderate usare durante l'installazione ?" #: ../iw/lilo.py:18 #, fuzzy msgid "Lilo Configuration" msgstr "Configurazione di LILO" #: ../iw/lilo.py:99 ../iw/lilo.py:198 msgid "Type" msgstr "Tipo" #: ../iw/lilo.py:128 #, fuzzy msgid "Install LILO boot record on:" msgstr "Installazione di LILO su:" #: ../iw/lilo.py:133 #, fuzzy msgid "Master Boot Record (MBR)" msgstr "Master Boot Record (MBR)" #: ../iw/lilo.py:137 msgid "First sector of boot partition" msgstr "Primo settore della partizione di boot" #: ../iw/lilo.py:141 ../textw/lilo.py:18 msgid "Use linear mode (needed for some SCSI drives)" msgstr "Usa il modo lineare ( necessario per alcuni controller SCSI )" #: ../iw/lilo.py:144 #, fuzzy msgid "Kernel parameters" msgstr "Parametri del kernel" #: ../iw/lilo.py:159 #, fuzzy msgid "Create boot disk" msgstr "Creazione del boot disk" #: ../iw/lilo.py:163 msgid "Do not install LILO" msgstr "Non installare LILO" #: ../iw/lilo.py:174 ../textw/lilo.py:135 msgid "Default" msgstr "Default" #: ../iw/lilo.py:174 ../textw/lilo.py:135 msgid "Partition type" msgstr "Tipo partizione" #: ../iw/lilo.py:174 ../iw/lilo.py:209 ../textw/lilo.py:78 #: ../textw/lilo.py:135 msgid "Boot label" msgstr "Boot label" #: ../iw/network.py:131 #, fuzzy msgid "Configure using DHCP" msgstr "Configurazione tramite DHCP" #: ../iw/network.py:138 msgid "Activate on boot" msgstr "Attivazione al boot" #: ../iw/network.py:147 #, fuzzy msgid "IP Address" msgstr "Indirizzo IP" #: ../iw/network.py:147 ../loader/net.c:615 #, fuzzy msgid "Netmask" msgstr "Netmask" #: ../iw/network.py:147 ../loader/loader.c:226 msgid "Network" msgstr "Rete" #: ../iw/network.py:147 msgid "Broadcast" msgstr "Broadcast" #: ../iw/network.py:188 msgid "Gateway" msgstr "Gateway" #: ../iw/network.py:188 msgid "Primary DNS" msgstr "DNS primario" #: ../iw/network.py:188 msgid "Secondary DNS" msgstr "DNS secondario" #: ../iw/network.py:188 msgid "Ternary DNS" msgstr "DNS terziario" #: ../iw/package.py:20 msgid "Individual Package Selection" msgstr "Scelta individuale dei pacchetti" #: ../iw/package.py:178 msgid "Up" msgstr "Su" #: ../iw/package.py:324 msgid "Name: " msgstr "Nome:" #: ../iw/package.py:329 #, fuzzy msgid "Package Details" msgstr "Dettagli sul pacchetto" #: ../iw/package.py:335 #, fuzzy msgid "Size: " msgstr "Size:" #: ../iw/package.py:341 #, fuzzy msgid "Select Package For Installation" msgstr "Scelta dei pacchetti per l'installazione" #: ../iw/package.py:377 ../textw/packages.py:24 ../textw/packages.py:89 msgid "Package Group Selection" msgstr "Scelta dei gruppi di pacchetti" #: ../iw/package.py:442 ../textw/packages.py:20 msgid "Select individual packages" msgstr "Scelta individuale dei pacchetti" #: ../iw/progress.py:26 #, fuzzy msgid "Installing Packages" msgstr "Installazione dei pacchetti" #: ../iw/progress.py:114 ../iw/progress.py:149 #, fuzzy msgid "Size" msgstr "Size:" #: ../iw/progress.py:115 #, fuzzy msgid "Summary" msgstr "Sommario" #: ../iw/progress.py:149 #, fuzzy msgid "Status" msgstr "Stato" #: ../iw/progress.py:149 #, fuzzy msgid "Packages" msgstr "Pacchetti" #: ../iw/progress.py:149 msgid "Time" msgstr "" #: ../iw/progress.py:154 #, fuzzy msgid "Total" msgstr "Totale" #: ../iw/progress.py:155 #, fuzzy msgid "Completed" msgstr "Completato" #: ../iw/progress.py:156 #, fuzzy msgid "Remaining" msgstr "Rimanente" #: ../iw/rootpartition.py:14 msgid "Confirm Partitioning Selection" msgstr "Conferma la scelta dei pacchetti" #: ../iw/rootpartition.py:29 ../textw/partitioning.py:26 msgid "Disk Druid" msgstr "Disk Druid" #: ../iw/rootpartition.py:91 ../textw/partitioning.py:109 #, fuzzy msgid "Automatic Partitioning" msgstr "Partizionamento automatico" #: ../iw/rootpartition.py:130 ../textw/partitioning.py:110 #, c-format msgid "" "%s\n" "\n" "If you don't want to do this, you can continue with this install by " "partitioning manually, or you can go back and perform a fully customized " "installation." msgstr "" "%s\n" "\n" "Se non volete attivare questa operazione, potete continuare l'installazione " "partizionando manualmente, oppure potete tornare indietro per scegliere una " "installazione personalizzata." #: ../iw/rootpartition.py:142 #, fuzzy msgid "Remove data" msgstr "Cancellazione dati" #: ../iw/rootpartition.py:145 ../textw/partitioning.py:114 #, fuzzy msgid "Manually partition" msgstr "Partizionamento manuale" #: ../iw/timezone.py:111 msgid "View:" msgstr "Mostra:" #: ../iw/timezone.py:149 msgid "Use Daylight Saving Time" msgstr "" #: ../iw/timezone.py:156 #, fuzzy msgid "Location" msgstr "Posizione" #: ../iw/timezone.py:157 msgid "UTC Offset" msgstr "UTC Offset" #: ../iw/timezone.py:161 msgid "System clock uses UTC" msgstr "Il clock di sistema usa UTC" #: ../iw/xconfig.py:9 msgid "Video Card" msgstr "Scheda video" #: ../iw/xconfig.py:10 msgid "Monitor" msgstr "Monitor" #: ../iw/xconfig.py:11 msgid "Video Ram" msgstr "Ram video" #: ../iw/xconfig.py:12 msgid "Horizontal Frequency Range" msgstr "Intervallo di frequenze orrizontali" #: ../iw/xconfig.py:13 msgid "Vertical Frequency Range" msgstr "Intervallo di frequenze verticali" #: ../iw/xconfig.py:14 msgid "Test failed" msgstr "Test fallito" #: ../iw/xconfig.py:22 ../iw/xconfig.py:203 #, fuzzy msgid "Customize X Configuration" msgstr "Configurazione personalizzata di X" #: ../iw/xconfig.py:63 #, fuzzy msgid "Bits per Pixel" msgstr "Bit per pixel:" #: ../iw/xconfig.py:73 ../iw/xconfig.py:199 #, fuzzy msgid "Test this configuration" msgstr "Test della configurazione" #: ../iw/xconfig.py:154 msgid "" "In most cases your video hardware can be probed to automatically determine " "the best settings for your display." msgstr "" "Nella maggior parte dei casi l'hardware video puo' essere rilevato " "automaticamente per determinare la miglior configurazione del sistema." #: ../iw/xconfig.py:162 #, fuzzy msgid "Autoprobe results:" msgstr "Rilevazione automatica:" #: ../iw/xconfig.py:176 msgid "" "Your monitor could not be autodetected. Please choose it from the list below:" msgstr "" "Non e' possibile rilevare automaticamente il monitor. Scegliete il modello " "del vostro monitor." #: ../iw/xconfig.py:206 msgid "Use Graphical Login" msgstr "Volete il login grafico" #: ../iw/xconfig.py:208 #, fuzzy msgid "Skip X Configuration" msgstr "Salta la configurazione X" #: ../textw/lilo.py:12 msgid "" "A few systems will need to pass special options to the kernel at boot time " "for the system to function properly. If you need to pass boot options to the " "kernel, enter them now. If you don't need any or aren't sure, leave this " "blank." msgstr "" "Alcuni sistemi hanno bisogno di trasmettere al kernel alcune opzioni al " "momento del boot per poter funzionare correttamente. Se dovete inserire " "queste opzioni inseritele ora, altrimenti potete lasciare questo campo vuoto." #: ../textw/lilo.py:62 msgid "Where do you want to install the bootloader?" msgstr "Volete installare il bootloader ?" #: ../textw/lilo.py:82 ../textw/lilo.py:102 msgid "Clear" msgstr "Clear" #: ../libfdisk/gnomefsedit.c:655 ../libfdisk/gnomefsedit.c:1619 #: ../libfdisk/gnomefsedit.c:2128 ../libfdisk/newtfsedit.c:450 #: ../libfdisk/newtfsedit.c:1501 ../textw/lilo.py:82 ../textw/lilo.py:100 #: ../textw/userauth.py:64 msgid "Cancel" msgstr "Cancella" #: ../textw/lilo.py:90 msgid "Edit Boot Label" msgstr "Modifica Boot Label" #: ../textw/lilo.py:147 msgid "" "The boot manager Red Hat uses can boot other operating systems as well. You " "need to tell me what partitions you would like to be able to boot and what " "label you want to use for each of them." msgstr "" "Il bootmanager di Red Hat Linux puo' caricare altri sistemi operativi. " "Dovete selezionare quale partizione volete abilitare per il boot e con quale " "etichetta." #: ../textw/packages.py:117 msgid "" "Some of the packages you have selected to install require packages you have " "not selected. If you just select Ok all of those required packages will be " "installed." msgstr "" "Alcuni pacchetti che avete selezionato richiedono la presenza di altri " "pacchetti non selezionati. Se premete OK tutte queste dipendenze verranno " "installate." #: ../textw/partitioning.py:18 ../textw/partitioning.py:57 msgid "Disk Setup" msgstr "Setup del disco" #: ../textw/partitioning.py:19 msgid "" "Disk Druid is a tool for partitioning and setting up mount points. It is " "designed to be easier to use than Linux's traditional disk partitioning " "sofware, fdisk, as well as more powerful. However, there are some cases " "where fdisk may be preferred.\n" "\n" "Which tool would you like to use?" msgstr "" "Disk Druid e' un tool per partizionare e gestire i punti di mount. E' stato " "creato per rendere semplice e potente l'utilizzo del piu' tradizionale " "fdisk. Tuttavia in alcuni casi puo' essere utile continuare ad utilizzare " "fdisk.\n" "\n" "Quale utility volete usare ?" #: ../textw/partitioning.py:58 msgid "" "To install Red Hat Linux, you must have at least one partition of 150 MB " "dedicated to Linux. We suggest placing that partition on one of the first " "two hard drives in your system so you can boot into Linux with LILO." msgstr "" "Per installare Red Hat Linux, dovete avere almeno una partizione con 150 MB " "dedicati a Linux. Vi suggeriamo di creare questa partizione in uno dei primi " "due dischi del sistema per permettere a LILO di avviare Linux." #: ../loader/loader.c:289 ../loader/loader.c:313 ../textw/partitioning.py:63 msgid "Done" msgstr "Fatto" #: ../textw/partitioning.py:114 ../textw/partitioning.py:115 msgid "Continue" msgstr "Continuare" #: ../textw/partitioning.py:142 msgid "Low Memory" msgstr "" #: ../textw/partitioning.py:143 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that okay?" msgstr "" #: ../textw/partitioning.py:162 msgid "" "What partitions would you like to format? We strongly suggest formatting all " "of the system partitions, including /, /usr, and /var. There is no need to " "format /home or /usr/local if they have already been configured during a " "previous install." msgstr "" "Quali partizioni desiderate formattare? Vi suggeriamo di formattare tutte\n" "le partizioni di sistema, incluse /, /usr, e /var. Non c'e' bisogno di\n" "formattare /home o /usr/local se le avete gia' formattate in precedenza." #: ../textw/partitioning.py:182 msgid "Check for bad blocks during format" msgstr "Controllo bad block durante la formattazione" #: ../textw/partitioning.py:186 #, fuzzy msgid "Choose Partitions to Format" msgstr "Scegliere le partizioni da formattare" #: ../textw/userauth.py:12 msgid "" "Pick a root password. You must type it twice to ensure you know what it is " "and didn't make a mistake in typing. Remember that the root password is a " "critical part of system security!" msgstr "" "Inserite la password di root. Dovete digitare due volte la password per " "eliminare gli errori di digitazione. Ricordatevi che la password di root\n" "e' fondamentale per la sicurezza del sistema!" #: ../loader/urls.c:298 ../textw/userauth.py:25 msgid "Password:" msgstr "Password:" #: ../textw/userauth.py:26 msgid "Password (again):" msgstr "Password (di nuovo):" #: ../textw/userauth.py:42 ../textw/userauth.py:93 #, fuzzy msgid "Password Length" msgstr "Lunghezza della password" #: ../textw/userauth.py:43 msgid "The root password must be at least 6 characters long." msgstr "La password di root deve essere lunga almeno 6 caratteri" #: ../textw/userauth.py:47 ../textw/userauth.py:101 msgid "Password Mismatch" msgstr "Password sbagliata" #: ../textw/userauth.py:48 ../textw/userauth.py:102 msgid "The passwords you entered were different. Please try again." msgstr "Le password che avete inserito sono differenti. Ridigitatele ! " #: ../textw/userauth.py:73 #, fuzzy msgid "Edit User" msgstr "Modifica utente" #: ../textw/userauth.py:75 #, fuzzy msgid "Add User" msgstr "Aggiungi utente" #: ../textw/userauth.py:80 #, fuzzy msgid "User ID" msgstr "Utente ID :" #: ../textw/userauth.py:94 #, fuzzy msgid "The password must be at least 6 characters long." msgstr "La password deve essere lunga almeno 6 caratteri" #: ../textw/userauth.py:111 msgid "User Exists" msgstr "Utente esistente" #: ../textw/userauth.py:112 msgid "This user id already exists. Choose another." msgstr "Utente gia' esistente. Sceglierne un altro." #: ../textw/userauth.py:139 msgid "" "You should use a normal user account for most activities on your system. By " "not using the root account casually, you'll reduce the chance of disrupting " "your system's configuration." msgstr "" "Dovreste utilizzare un'account generica per la maggior parte delle\n" "attivita' sul vostro sistema. Riducete il piu' possibile l'uso\n" "dell'account di root, per limitare le possibilita' di modificare\n" "erroneamente la configurazione del sistema." #: ../textw/userauth.py:152 msgid "" "What user account would you like to have on the system? You should have at " "least one non-root account for normal work, but multi-user systems can have " "any number of accounts set up." msgstr "" "Quale account vi piacerebbe avere ? Dovreste avere almeno un'account " "non-root per l'uso normale del calcolatore. I sistemi multi-user possono " "avere un numero elevato di account." #: ../textw/userauth.py:162 #, fuzzy msgid "User name" msgstr "Nome utente:" #: ../textw/userauth.py:186 msgid "Enter the information for the user." msgstr "Inserisci le informazioni sull'utente." #: ../textw/userauth.py:198 msgid "Change the information for this user." msgstr "Modifica le informazioni sull'utente." #: ../textw/userauth.py:249 #, fuzzy msgid "Use Shadow Passwords" msgstr "Uso delle Shadow Password" #: ../textw/userauth.py:251 msgid "Enable MD5 Passwords" msgstr "Attivazione delle Password MD5" #: ../textw/userauth.py:258 #, fuzzy msgid "NIS Domain:" msgstr "Dominio NIS:" #: ../textw/userauth.py:260 #, fuzzy msgid "NIS Server:" msgstr "Server NIS:" #: ../textw/userauth.py:262 msgid "or use:" msgstr "o usa:" #: ../textw/userauth.py:265 msgid "Request server via broadcast" msgstr "Request server via broadcast" #: ../libfdisk/fsedit.c:605 ../libfdisk/fsedit.c:612 ../libfdisk/fsedit.c:619 #: ../libfdisk/fsedit.c:628 ../libfdisk/fsedit.c:640 ../libfdisk/fsedit.c:650 msgid "Bad Mount Point" msgstr "Mount Point non corretto" #: ../libfdisk/fsedit.c:606 #, c-format msgid "The %s directory must be on the root filesystem." msgstr "La directory %s deve trovarsi nel filesystem root" #: ../libfdisk/fsedit.c:613 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points must begin with a leading /." msgstr "" "Il punto di mount %s e' illegale.\n" "\n" "I punti di mount devono iniziare con /" #: ../libfdisk/fsedit.c:620 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may not end with a /." msgstr "" "Il punto di mount %s e' illegale.\n" "\n" "I punti di mount non possono finire con un /" #: ../libfdisk/fsedit.c:629 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may only printable characters." msgstr "" "Il punto di mount %s e' illegale.\n" "\n" "I nomi dei mount possono contenere solo caratteri stampabili." #: ../libfdisk/fsedit.c:641 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "System partitions must be on Linux Native partitions." msgstr "" "Il punto di mount %s e' illegale.\n" "\n" "La partizione di sistema si deve trovare su una partizione Linux Nativa." #: ../libfdisk/fsedit.c:651 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "/usr must be on a Linux Native partition or an NFS volume." msgstr "" "Il punto di mount %s e' illegale.\n" "\n" "/usr deve essere una partizione Linux Nativa o un volume NFS." #: ../libfdisk/fsedit.c:679 msgid "Too Many Drives" msgstr "Troppi drive" #: ../libfdisk/fsedit.c:680 msgid "" "You have more drives than this program supports. Please use the standard " "fdisk program to setup your drives and please notify Red Hat Software that " "you saw this message." msgstr "" "Avete piu' drive di quelli supportati dal programma standard. Usate il " "programma fdisk per settare i vostri drive. Inviate una e-mail a " "support@redhat.it allegando una lista del vostro hardware. Grazie !" #: ../libfdisk/fsedit.c:695 msgid "No Drives Found" msgstr "Nessun Drive trovato" #: ../libfdisk/fsedit.c:696 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem." msgstr "" "Errore rilevato - non sono stati trovati device su cui creare un nuovo " "filesystem. Verificate l'hardware per risolvere questo problema." #: ../libfdisk/fsedit.c:950 #, c-format msgid "" "A disk with a corrupt Sun disklabel has been found while reading block " "device %s. You must use fdisk to create and write a new label to this " "device." msgstr "" "Un disco con un disklabel Sun errato e' stato trovato leggendo il device %s " "Potete usare fdisk per creare e scrivere una nuova etichetta per questo " "disco." #: ../libfdisk/fsedit.c:954 msgid "Corrupt Sun disklabel" msgstr "Disklabel Sun errato" #: ../libfdisk/fsedit.c:955 ../libfdisk/fsedit.c:1011 #: ../libfdisk/fsedit.c:1036 msgid "Skip Drive" msgstr "Salta il drive" #: ../libfdisk/fsedit.c:964 ../libfdisk/fsedit.c:1032 #, c-format msgid "" "An error occurred reading the partition table for the block device %s. The " "error was" msgstr "" "Errore rilevato leggendo la tabella delle partizioni per il block device %s. " "Errore:" #: ../libfdisk/fsedit.c:1005 #, c-format msgid "" "The partition table on device %s is corrupted. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive." msgstr "" "La tabella delle partizioni sul device %s e' danneggiata. Per creare nuove " "partizioni bisogna inizializzare, causando la PERDITA DI TUTTI I DATI nel " "drive." #: ../libfdisk/fsedit.c:1010 msgid "Bad Partition Table" msgstr "Tabella delle partizioni errata" #: ../libfdisk/fsedit.c:1011 msgid "Initialize" msgstr "Inizializzazione" #: ../libfdisk/fsedit.c:1036 ../loader/net.c:329 msgid "Retry" msgstr "Riprovare" #: ../libfdisk/fsedit.c:1048 msgid "BSD Disklabel" msgstr "BSD Disklabel " #: ../libfdisk/fsedit.c:1048 msgid "" "A disk with a BSD disklabel has been found. The Red Hat installation only " "supports BSD Disklabels in read-only mode, so you must use a custom install " "and fdisk (instead of Disk Druid) for machines with BSD Disklabels." msgstr "" "Un BSD disklabel e' stato trovato. L'installazione di Red Hat supporta i BSD " "Disklabel in sola lettura. Dovete usare l'installazione custom e fdisk ( al " "posto di Disk Druid ) per le macchine con disklabel BSD." #: ../libfdisk/fsedit.c:1078 #, c-format msgid "System error %d" msgstr "Errore di sistema %d" #: ../libfdisk/fsedit.c:1087 ../libfdisk/fsedit.c:1089 msgid "Fdisk Error" msgstr "Fdisk Error" #: ../libfdisk/gnomefsedit.c:517 ../libfdisk/gnomefsedit.c:686 #, fuzzy msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:525 ../libfdisk/gnomefsedit.c:688 #, fuzzy msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:580 ../libfdisk/newtfsedit.c:697 msgid "Delete Partition" msgstr "Cancella Partizioni" #: ../libfdisk/gnomefsedit.c:581 ../libfdisk/newtfsedit.c:698 msgid "Are you sure you want to delete this partition?" msgstr "Siete sicuri di voler cancellare questa partizione?" #: ../libfdisk/gnomefsedit.c:639 ../libfdisk/gnomefsedit.c:645 #: ../libfdisk/gnomefsedit.c:649 ../libfdisk/gnomefsedit.c:651 #: ../libfdisk/newtfsedit.c:263 ../libfdisk/newtfsedit.c:269 #: ../libfdisk/newtfsedit.c:273 ../libfdisk/newtfsedit.c:275 msgid "Edit Partition" msgstr "Edit partition" #: ../libfdisk/gnomefsedit.c:666 ../libfdisk/gnomefsedit.c:1628 #, fuzzy msgid "Mount Point:" msgstr "Mount Point" #: ../libfdisk/gnomefsedit.c:701 #, fuzzy msgid "Size (Megs):" msgstr "Dimen. (MB):" #: ../libfdisk/gnomefsedit.c:732 msgid "Grow to fill disk?" msgstr "" #: ../libfdisk/gnomefsedit.c:751 ../libfdisk/newtfsedit.c:335 msgid "Allocation Status:" msgstr "Stato di allocazione:" #: ../libfdisk/gnomefsedit.c:755 ../libfdisk/newtfsedit.c:337 msgid "Successful" msgstr "Positivo" #: ../libfdisk/gnomefsedit.c:758 ../libfdisk/newtfsedit.c:339 msgid "Failed" msgstr "Fallito" #: ../libfdisk/gnomefsedit.c:770 ../libfdisk/newtfsedit.c:344 msgid "Failure Reason:" msgstr "Spiegazioni:" #: ../libfdisk/gnomefsedit.c:784 ../libfdisk/gnomefsedit.c:1654 #, fuzzy msgid "Partition Type:" msgstr "Tipo partizione" #: ../libfdisk/gnomefsedit.c:851 msgid "Allowable Drives:" msgstr "Drive permessi:" #: ../libfdisk/gnomefsedit.c:956 ../libfdisk/gnomefsedit.c:1846 #: ../libfdisk/newtfsedit.c:486 msgid "No Mount Point" msgstr "Nessun punto di mount" #: ../libfdisk/gnomefsedit.c:957 ../libfdisk/newtfsedit.c:487 msgid "" "You have not selected a mount point for this partition. Are you sure you " "want to do this?" msgstr "" "Non avete selezionato nessun punto di mount per questa partizione. Siete " "sicuri ?" #: ../libfdisk/gnomefsedit.c:1000 ../libfdisk/gnomefsedit.c:1854 #: ../libfdisk/newtfsedit.c:527 msgid "Mount Point Error" msgstr "Errore nel punto di moount" #: ../libfdisk/gnomefsedit.c:1001 ../libfdisk/newtfsedit.c:528 msgid "" "The mount point requested is either an illegal path or is already in use. " "Please select a valid mount point." msgstr "" "Il punto di mount richiesto e' sbagliato o gia' in uso. Selezionare un punto " "di mount valido." #: ../libfdisk/gnomefsedit.c:1026 ../libfdisk/newtfsedit.c:545 msgid "Size Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1027 ../libfdisk/newtfsedit.c:546 #, fuzzy msgid "" "The size requested is illegal. Make sure the size is greater and zero (0), " "and is specified int decimal (base 10) format." msgstr "" "La dimensione richiesta e' illegale. Verificate che sia > di 0 e nel formato " "decimale ( base 10 )." #: ../libfdisk/gnomefsedit.c:1062 ../libfdisk/gnomefsedit.c:1967 #: ../libfdisk/newtfsedit.c:581 msgid "Swap Size Error" msgstr "Dimensione area di swap errata" #: ../libfdisk/gnomefsedit.c:1063 ../libfdisk/gnomefsedit.c:1968 #: ../libfdisk/newtfsedit.c:582 #, c-format msgid "" "You have created a swap partition which is too large. The maximum size of a " "swap partition is %ld Megabytes." msgstr "" "Avete creato una partizione di swap troppo larga. La dimensione massima " "della partizione di swap e' %d Megabytes." #: ../libfdisk/gnomefsedit.c:1079 ../libfdisk/gnomefsedit.c:1086 msgid "No RAID Drive Constraint" msgstr "" #: ../libfdisk/gnomefsedit.c:1081 #, fuzzy msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive.\n" " Are you sure you want to do this?" msgstr "" "Non avete selezionato nessun punto di mount per questa partizione. Siete " "sicuri ?" #: ../libfdisk/gnomefsedit.c:1087 #, fuzzy msgid "Close" msgstr "Chiudi" #: ../libfdisk/gnomefsedit.c:1088 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive. Please select one drive to constrain this partition to." msgstr "" "Avete configurato una partizione RAID senza limitare la partizione ad un " "drive singolo. " #. XXXXX - for now destroy the raid entry since it #. now contains unallocated partitions! #: ../libfdisk/gnomefsedit.c:1267 msgid "RAID Entry Incomplete" msgstr "RAID Entry Incomplete" #: ../libfdisk/gnomefsedit.c:1268 #, c-format msgid "" "The raid device /dev/%s now contains partitions which are unallocated. The " "raid device /dev/%s will now be decomposed into its component partitions. " "Please recompose the raid device with allocated partitions." msgstr "" "Il dispositivo raid /dev/%s contiene delle partizioni non allocate. Il " "dispositivo raid /dev/%s sara' decomposto nelle sue partizioni. Ricostruite " "il dispositivo raid con le partizioni allocate." #. build list of why they all failed #: ../libfdisk/gnomefsedit.c:1361 ../libfdisk/gnomefsedit.c:1380 #: ../libfdisk/newtfsedit.c:84 ../libfdisk/newtfsedit.c:1482 msgid "Unallocated Partitions" msgstr "Partizioni non allocate" #: ../libfdisk/gnomefsedit.c:1365 ../libfdisk/gnomefsedit.c:1375 #: ../libfdisk/newtfsedit.c:88 msgid "" "There are currently unallocated partition(s) present in the list of " "requested partitions. The unallocated partition(s) are shown below, along " "with the reason they were not allocated." msgstr "" "Ci sono partizioni non allocate presenti nella lista delle partizioni " "richieste. Le partizioni non allocate sono visualizzate sotto" #: ../libfdisk/gnomefsedit.c:1640 #, fuzzy msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2382 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2384 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2941 #, fuzzy msgid "Unallocated Partitions Exist..." msgstr "Partizioni non allocate ..." #: ../libfdisk/gnomefsedit.c:2952 #, fuzzy msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) or a " "RAID partition for the install to proceed." msgstr "" "Dovete assegnare la partizione di root (/) ad una partizione Linux nativa " "(ext2) per continuare l'installazione." #: ../libfdisk/gnomefsedit.c:2966 ../libfdisk/gnomefsedit.c:2979 #, fuzzy msgid "" "You must assign a boot (/boot) partition to a Linux native partition (ext2) " "or a RAID-1 partition for the install to proceed." msgstr "" "Dovete assegnare la partizione di root (/) ad una partizione Linux nativa " "(ext2) oppure ad una partizione RAID-1 per continuare l'installazione." #: ../libfdisk/gnomefsedit.c:2994 #, fuzzy msgid "" "Because you have assigned the root partition (/) to a RAID device, you must " "also assign a boot (/boot) partition to a Linux native partition (ext2) or a " "RAID-1 partition for the install to proceed." msgstr "" "Poiche' e' stata assegnata la partizione di root (/) ad un dispositivo RAID, " "dovete anche assegnare la partizione boot (/boot) ad una partizione Linux " "nativa (ext2) o ad una partizione RAID-1 per poter proseguire " "nell'installazione." #: ../libfdisk/gnomefsedit.c:3067 #, fuzzy msgid "Partitions" msgstr "partizioni" #: ../libfdisk/gnomefsedit.c:3111 #, fuzzy msgid "_Add..." msgstr "Aggiungi" #: ../libfdisk/gnomefsedit.c:3123 #, fuzzy msgid "_Edit..." msgstr "Modifica" #: ../libfdisk/gnomefsedit.c:3124 #, fuzzy msgid "_Delete" msgstr "Cancella" #: ../libfdisk/gnomefsedit.c:3125 msgid "_Reset" msgstr "Reset" #: ../libfdisk/gnomefsedit.c:3154 #, fuzzy msgid "_Make RAID Device" msgstr "Crea dispositivo RAID" #: ../libfdisk/gnomefsedit.c:3163 #, fuzzy msgid "Auto Partition" msgstr "Partizionamento automatico" #: ../libfdisk/gnomefsedit.c:3176 #, fuzzy msgid "Drive Summary" msgstr "Sommario dei drive" #: ../libfdisk/newtfsedit.c:142 msgid "Swap Partition" msgstr "Partizione swap" #: ../libfdisk/newtfsedit.c:1282 msgid "Current Disk Partitions" msgstr "Partizioni correnti" #: ../libfdisk/newtfsedit.c:1315 msgid "Drive Summaries" msgstr "Sommario dei drive" #: ../libfdisk/newtfsedit.c:1430 msgid "No Root Partition" msgstr "Nessuna partizione di root" #: ../libfdisk/newtfsedit.c:1431 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) for " "the install to proceed." msgstr "" "Dovete assegnare la partizione di root (/) ad una partizione Linux nativa " "(ext2) per continuare l'installazione." #: ../libfdisk/newtfsedit.c:1451 msgid "No Swap Partition" msgstr "Nessuna partizione di swap" #: ../libfdisk/newtfsedit.c:1452 msgid "You must assign a swap partition for the install to proceed." msgstr "Dovete assegnare una partizione swap per il processo d'installazione." #: ../libfdisk/newtfsedit.c:1484 msgid "" "There are unallocated partitions left. If you quit now they will not be " "written to the disk.\n" "\n" "Are you sure you want to exit?" msgstr "" "Ci sono delle partizioni non allocate. Se uscite non verranno scritte sul " "disco.\n" "\n" "Siete sicuri di voler uscire?" #: ../libfdisk/newtfsedit.c:1500 msgid "Save Changes" msgstr "Salva i cambiamenti" #: ../libfdisk/newtfsedit.c:1502 msgid "Save changes to partition table(s)?" msgstr "Salva i cambiamenti nella tabella delle partizioni?" #: ../libfdisk/newtfsedit.c:1546 msgid "You may only delete NFS mounts." msgstr "Potete solo cancellare i mount NFS." #: ../loader/cdrom.c:26 msgid "Other CDROM" msgstr "Altro CDROM" #: ../loader/cdrom.c:32 msgid "CDROM type" msgstr "Tipo CDROM" #: ../loader/cdrom.c:32 msgid "What type of CDROM do you have?" msgstr "Che tipo di CDROM avete ?" #: ../loader/cdrom.c:88 msgid "Initializing CDROM..." msgstr "Inizializzazione del CDROM ..." #: ../loader/devices.c:45 #, fuzzy msgid "Miscellaneous" msgstr "Miscellaneous options:" #: ../loader/devices.c:54 #, fuzzy msgid "Module Parameters" msgstr "Parametri del kernel" #: ../loader/devices.c:54 msgid "" "This module can take parameters which affects its operation. If you don't " "know what parameters to supply, just skip this screen by pressing the \"OK\" " "button now." msgstr "" #: ../loader/devices.c:120 msgid "Which driver should I try?" msgstr "Quale driver vorreste provare?" #: ../loader/devices.c:135 #, fuzzy msgid "Specify module parameters" msgstr "Parametri del kernel" #: ../loader/devices.c:141 ../loader/loader.c:239 ../loader/loader.c:298 #: ../loader/loader.c:313 #, fuzzy msgid "Devices" msgstr "Device" #: ../loader/kickstart.c:57 ../loader/kickstart.c:67 ../loader/kickstart.c:106 msgid "Kickstart Error" msgstr "Errore Kickstart" #: ../loader/kickstart.c:58 #, c-format msgid "Error opening: kickstart file %s: %s" msgstr "Errore di apertura del file kickstart %s: %s" #: ../loader/kickstart.c:68 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "Errore di lettura del file %s: %s" #: ../loader/kickstart.c:107 #, c-format msgid "Error on line %d of kickstart file %s." msgstr "Errore nella linea %d del file kickstart %s." #: ../loader/lang.c:245 msgid "Choose a Language" msgstr "Scelta della lingua" #: ../loader/lang.c:501 #, fuzzy msgid "Keyboard Type" msgstr "Tipo di tastiera" #: ../loader/lang.c:502 #, fuzzy msgid "What type of keyboard do you have?" msgstr "Che tipo di stampante avete ?" #: ../loader/loader.c:98 msgid "Local CDROM" msgstr "" #: ../loader/loader.c:101 msgid "NFS image" msgstr "" #: ../loader/loader.c:106 #, fuzzy msgid "Hard drive" msgstr "Dischi fissi" #: ../loader/loader.c:122 #, fuzzy msgid "Welcome to Red Hat Linux" msgstr "Benvenuti in Red Hat Linux!" #: ../loader/loader.c:124 #, fuzzy msgid "" " / between elements | selects | next screen " msgstr "" " / tra elementi | seleziona | successivo " #: ../loader/loader.c:226 msgid "SCSI" msgstr "" #: ../loader/loader.c:240 #, fuzzy msgid "What kind of device would you like to add" msgstr "Quale tipo di sistema desiderate installare ?" #: ../loader/loader.c:287 #, fuzzy msgid "I have found the following devices in your system:" msgstr "" "Sono stati trovati i seguenti tipi di adattori SCSI: \n" "\n" #: ../loader/loader.c:289 ../loader/loader.c:313 #, fuzzy msgid "Add Device" msgstr "Device" #: ../loader/loader.c:314 msgid "" "I don't have any special device drivers loaded for your system. Would you " "like to load some now?" msgstr "" #: ../loader/loader.c:398 ../loader/loader.c:400 #, fuzzy msgid "Loading" msgstr "Posizione" #: ../loader/loader.c:452 msgid "Loading second stage ramdisk..." msgstr "Caricamento del secondo stadio ramdisk..." #: ../loader/loader.c:456 #, fuzzy msgid "Error loading ramdisk." msgstr "Errore leggendo il secondo livello di ramdisk." #: ../loader/loader.c:577 msgid "Hard Drives" msgstr "Dischi fissi" #: ../loader/loader.c:578 #, fuzzy msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" "Non avete definito nessuna area di swap. Volete continuare o ripartizionare " "il disco?" #: ../loader/loader.c:591 #, fuzzy msgid "" "What partition and directory on that partition hold the RedHat/RPMS and " "RedHat/base directories? If you don't see the disk drive you're using listed " "here, press F2 to configure additional devices." msgstr "" "In quale partizione e directory si trovano le directory RedHat/RPMS e " "RedHat/base" #: ../loader/loader.c:605 msgid "Directory holding Red Hat:" msgstr "Directory contenente Red Hat:" #: ../loader/loader.c:625 msgid "Select Partition" msgstr "Selezionare Partizione" #: ../loader/loader.c:669 #, c-format msgid "Device %s does not appear to contain a Red Hat installation tree." msgstr "Il device %s non sembra contenere l'albero d'installazione Red Hat" #: ../loader/loader.c:714 msgid "" "I could not find a Red Hat Linux CDROM in any of your CDROM drives. Please " "insert the Red Hat CD and press \"OK\" to retry." msgstr "" #: ../loader/loader.c:847 msgid "That directory does not seem to contain a Red Hat installation tree." msgstr "La directory non sembra contenere l'albero d'installazione Red Hat." #: ../loader/loader.c:852 msgid "I could not mount that directory from the server" msgstr "Impossibile montare la directory dal server" #: ../loader/loader.c:937 msgid "FTP" msgstr "" #: ../loader/loader.c:938 #, fuzzy msgid "Unable to retrieve the second stage ramdisk" msgstr "Impossibile trovare il secondo livello ramdisk: %s" #: ../loader/loader.c:1062 msgid "Rescue Method" msgstr "" #: ../loader/loader.c:1063 msgid "Installation Method" msgstr "Metodo d'installazione" #: ../loader/loader.c:1065 #, fuzzy msgid "What type of media contains the rescue image?" msgstr "In che tipo di supporto sono contenuti i pacchetti da installare ?" #: ../loader/loader.c:1067 msgid "What type of media contains the packages to be installed?" msgstr "In che tipo di supporto sono contenuti i pacchetti da installare ?" #: ../loader/loader.c:1461 msgid "Cannot find ks.cfg on boot floppy." msgstr "Non posso trovare ks.cfg nel floppy di boot." #: ../loader/loader.c:1571 msgid "PC Card" msgstr "" #: ../loader/loader.c:1571 #, fuzzy msgid "Initializing PC Card Devices..." msgstr "Inizializzazione del CDROM ..." #: ../loader/net.c:147 msgid "NFS server name:" msgstr "Nome del server NFS:" #: ../loader/net.c:150 ../loader/urls.c:160 msgid "Red Hat directory:" msgstr "Directory Red Hat:" #: ../loader/net.c:156 #, fuzzy msgid "NFS Setup" msgstr "SMB Setup" #: ../loader/net.c:157 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your NFS server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecture" msgstr "" "Inserire le seguenti informazioni:\n" "\n" " o il nome o l'indirizzo IP del server NFS\n" " o la directory del server che contiene Red \n" " Hat Linux per la vostra architettura" #: ../loader/net.c:228 msgid "" "Please enter the IP configuration for this machine. Each item should be " "entered as an IP address in dotted-decimal notation (for example, 1.2.3.4)." msgstr "" "Inserire la configurazione IP. In ogni campo si deve inserire un\n" "indirizzo IP nella notazione dotted-decimal (per esempio 10.0.0.30)." #: ../loader/net.c:270 msgid "Use dynamic IP configuration (BOOTP/DHCP)" msgstr "" #: ../loader/net.c:298 msgid "Configure TCP/IP" msgstr "Configurazione TCP/IP" #: ../loader/net.c:329 #, fuzzy msgid "Missing Information" msgstr "Informazioni sulla stampante" #: ../loader/net.c:330 #, fuzzy msgid "You must enter both a valid IP address and a netmask." msgstr "E' necessario inserire un indirizzo IP valido ed il relativo netmask." #: ../loader/net.c:338 ../loader/net.c:569 msgid "Dynamic IP" msgstr "" #: ../loader/net.c:339 ../loader/net.c:570 #, fuzzy msgid "Sending request for IP information..." msgstr "Invio di una richiesta DHCP ..." #: ../loader/net.c:461 msgid "Determining host name and domain..." msgstr "Determinazione hostname e dominio ..." #: ../loader/net.c:559 msgid "kickstart" msgstr "kickstart" #: ../loader/net.c:560 #, c-format msgid "bad argument to kickstart network command %s: %s" msgstr "argomento errato nel comando di rete di kickstart %s: %s" #: ../loader/net.c:607 #, fuzzy msgid "Boot protocol to use" msgstr "Boot Protocol" #: ../loader/net.c:609 #, fuzzy msgid "Network gateway" msgstr "Network Setup" #: ../loader/net.c:611 #, fuzzy msgid "IP address" msgstr "Indirizzo IP:" #: ../loader/net.c:613 #, fuzzy msgid "Nameserver" msgstr "Server" #: ../loader/net.c:620 #, fuzzy msgid "Domain name" msgstr "Dominio NIS:" #: ../loader/net.c:623 #, fuzzy msgid "Network device" msgstr "Network Setup" #: ../loader/net.c:695 #, fuzzy msgid "" " / between elements | selects | next " "screen" msgstr "" " / tra elementi | seleziona | successivo " #: ../loader/net.c:696 #, c-format msgid "netconfig %s (C) 1999 Red Hat, Inc." msgstr "" #: ../loader/net.c:698 #, fuzzy msgid "Network configuration" msgstr "Configurazione della rete" #: ../loader/net.c:699 #, fuzzy msgid "Would you like to set up networking?" msgstr "Non settare la rete" #: ../loader/urls.c:62 ../loader/urls.c:65 msgid "Retrieving" msgstr "Ritento" #: ../loader/urls.c:129 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your FTP server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" "Inserire le seguenti informazioni:\n" "\n" " o il nome o l'indirizzo IP del server FTP\n" " o la directory del server che contiene Red\n" " Hat Linux per la vostra architettura\n" #: ../loader/urls.c:138 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your web server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" "Inserire le seguenti informazioni:\n" "\n" " o il nome o l'indirizzo IP del server web\n" " o la directory del server che contiene Red\n" " Hat Linux per la vostra architettura\n" #: ../loader/urls.c:156 msgid "FTP site name:" msgstr "Nome del server FTP:" #: ../loader/urls.c:157 msgid "Web site name:" msgstr "Nome del server Web:" #: ../loader/urls.c:176 msgid "Use non-anonymous ftp or a proxy server" msgstr "Usare un non-anonymous ftp o un proxy server" #: ../loader/urls.c:180 #, fuzzy msgid "Use proxy server" msgstr "Scelta del server" #: ../loader/urls.c:191 msgid "FTP Setup" msgstr "FTP Setup" #: ../loader/urls.c:192 msgid "HTTP Setup" msgstr "HTTP Setup" #: ../loader/urls.c:202 msgid "You must enter a server name." msgstr "Bisogna inserire il nome del server." #: ../loader/urls.c:207 msgid "You must enter a directory." msgstr "Bisogna inserire una directory." #: ../loader/urls.c:268 msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below. If you are using an FTP proxy enter the name of the FTP " "proxy server to use." msgstr "" "Se state usando un server ftp non anonymous od un server ftp proxy inserite " "il nome e la password che desiderate usare." #: ../loader/urls.c:274 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" "Se state usando un server HTTP proxy inserite il nome del server proxy HTTP " "che desiderate usare." #: ../loader/urls.c:295 #, fuzzy msgid "Account name:" msgstr "Nome di account:" #: ../loader/urls.c:303 msgid "FTP Proxy:" msgstr "FTP Proxy" #: ../loader/urls.c:304 msgid "HTTP Proxy:" msgstr "HTTP Proxy" #: ../loader/urls.c:308 msgid "FTP Proxy Port:" msgstr "Porta Proxy FTP:" #: ../loader/urls.c:309 msgid "HTTP Proxy Port:" msgstr "Porta Proxy HTTP:" #: ../loader/windows.c:46 #, fuzzy msgid "Loading SCSI driver" msgstr "Caricamento del disk driver..." #, fuzzy #~ msgid "Root Partition Selection" #~ msgstr "Scelta della partizione di root" #~ msgid "Warning" #~ msgstr "Warning" #~ msgid "You are about to lose data! Are you sure you want to do this?" #~ msgstr "State per perdere TUTTI I DATI!. Volete continuare?" #~ msgid "Disk Space" #~ msgstr "Spazio su disco" #~ msgid "There is not enough disk space for this type of installation." #~ msgstr "Non c'e' spazio su disco per questo tipo di installazione." #, fuzzy #~ msgid "There is not enough disk space for the chosen partitioning." #~ msgstr "Non c'e' abbastanza spazio per il partizionamento scelto." #, fuzzy #~ msgid "Skip LILO install" #~ msgstr "Salta l'installazione di LILO" #~ msgid "No BOOTP reply received" #~ msgstr "Nessuna risposta dal server BOOTP" #~ msgid "No DHCP reply received" #~ msgstr "Nessuna risposta dal server DHCP" #~ msgid "Base IO port:" #~ msgstr "Base IO port:" #~ msgid "IRQ level:" #~ msgstr "IRQ level:" #~ msgid "IO base, IRQ:" #~ msgstr "IO base, IRQ:" #~ msgid "Use other options" #~ msgstr "Usate altre opzioni" #~ msgid "Interrupt level (IRQ):" #~ msgstr "Livello di interrupt (IRQ):" #~ msgid "IO base, IRQ, label:" #~ msgstr "IO base, IRQ, label:" #~ msgid "Specify options" #~ msgstr "Specificare le opzioni" #~ msgid "mknod() failed: %s" #~ msgstr "mknod() fallito: %s" #~ msgid "Load module" #~ msgstr "Caricamento del modulo" #~ msgid "Probe" #~ msgstr "Rilevamento" #~ msgid "A %s card has been found on your system." #~ msgstr "La scheda %s e' stata rilevata nel vostro sistema" #~ msgid "device command" #~ msgstr "device command" #~ msgid "bad argument to kickstart device command %s: %s" #~ msgstr "Argomento non valido per il kickstart device command %s: %s" #~ msgid "bad arguments to kickstart device command" #~ msgstr "Argomento non valido per il kickstart device command" #~ msgid "No module exists for %s" #~ msgstr "Non esiste nessun modulo per %s" #~ msgid "I can't find the device anywhere on your system!" #~ msgstr "Non e' possibile trovare il dispositivo nel vostro sistema!" #~ msgid "" #~ "In some cases, the %s driver needs to have extra information to work " #~ "properly, although it normally works fine without. Would you like to specify " #~ "extra options for it or allow the driver to probe your machine for the " #~ "information it needs? Occasionally, probing will hang a computer, but it " #~ "should not cause any damage." #~ msgstr "" #~ "Il alcuni casi, il driver %s ha bisogno di informazioni aggiuntive per " #~ "funzionare correttamente. Volete specificare delle opzioni aggiuntive o " #~ "lasciare al sistema la rilevazione del dispositivo ? In alcuni casi la " #~ "rilevazione puo' bloccare il computer, ma non dovrebbe causare nessun danno." #~ msgid "" #~ "In many cases, the %s driver needs to be provided with extra information on " #~ "your hardware. If you prefer, some common values for those parameters will " #~ "be tried. This process can hang a machine, although it should not cause any " #~ "damage." #~ msgstr "" #~ "In molti casi, il driver %s ha bisogno di informazioni aggiuntive sul vostro " #~ "hardware. Se preferite, e' possibile provare i parametri piu' comuni. Questo " #~ "processo puo' bloccare il calcolatore, anche se non danneggiera' il vostro " #~ "sistema." #~ msgid "Module options:" #~ msgstr "Opzioni del modulo:" #~ msgid "Cannot open /proc/filesystems: %d" #~ msgstr "Non e' possibile aprire /proc/filesystems: %d" #~ msgid "Failed to open %s. No upgrade log will be kept." #~ msgstr "Impossibile aprire %s. Nessun file di upgrade log verra' salvato." #~ msgid "Fatal error opening RPM database" #~ msgstr "Errore fatale durante l'apertura del database RPM" #~ msgid "Error ordering package list: %s" #~ msgstr "Errore durante l'ordinamento della lista di pacchetti : %s" #~ msgid "" #~ "You don't appear to have enough disk space to install the packages you've " #~ "selected. You need more space on the following filesystems:\n" #~ "\n" #~ msgstr "" #~ "Non c'e' abbastanza spazio sul disco per installare i pacchetti che avete " #~ "selezionato. Avete bisogno di piu' spazio in questo filesystem:\n" #~ "\n" #~ msgid "Space Needed" #~ msgstr "Spazio necessario" #~ msgid "Install anyway" #~ msgstr "Installa comunque" #~ msgid "Fatal error reopening RPM database" #~ msgstr "Errore fatale riaprendo il database RPM" #~ msgid "Examining packages to install..." #~ msgstr "Verifica dei pacchetti da installare..." #~ msgid "Examining files to install..." #~ msgstr "Verifica dei file da installare..." #~ msgid "Finding overlapping files..." #~ msgstr "Ricerca di file overlapping..." #~ msgid "Processing" #~ msgstr "Processing" #~ msgid "Removing old files..." #~ msgstr "Eliminazione dei vecchi file..." #~ msgid "Error installing package: cannot open RPM file for %s: %s" #~ msgstr "" #~ "Errore durante l'installazione: impossibile aprire il file RPM %s: %s" #~ msgid "Force supplemental disk" #~ msgstr "Forzare il disco supplementare" #~ msgid "Note" #~ msgstr "Nota" #~ msgid "Insert your Red Hat CD into your CD drive now" #~ msgstr "Inserire il CD Red Hat nel CDROM" #~ msgid "I could not mount a CD on device /dev/%s" #~ msgstr "Impossibile montare il CD nel device /dev/%s" #~ msgid "That CDROM device does not seem to contain a Red Hat CDROM." #~ msgstr "Il CDROM non sembra contenere il CD Red Hat." #~ msgid "nfs command" #~ msgstr "comando nfs" #~ msgid "bad argument to kickstart nfs command %s: %s" #~ msgstr "argomento errato per il comando nfs kickstart %s: %s" #~ msgid "nfs command incomplete" #~ msgstr "comando nfs incompleto" #~ msgid "PCMCIA Disk" #~ msgstr "Disco PCMCIA" #~ msgid "" #~ "I failed to mount the floppy. Please insert the Red Hat PCMCIA disk, or " #~ "choose Cancel to pick a different installation process." #~ msgstr "" #~ "Impossibile montare il floppy. Inserire il disco PCMCIA Red Hat, o scegliere " #~ "Cancella per attivare una diversa installazione." #~ msgid "Loading PCMCIA Support" #~ msgstr "Caricamento del supporto PCMCIA" #~ msgid "Supplemental Disk" #~ msgstr "Disco supplementare" #~ msgid "" #~ "I failed to mount the floppy. Please insert the Red Hat Supplementary " #~ "Install disk, or choose Cancel to pick a different installation process." #~ msgstr "" #~ "Impossibile montare il floppy. Inserire il disco supplementare Red Hat o " #~ "selezionare Cancella per scegliere una diversa installazione." #~ msgid "Loading Supplemental Disk..." #~ msgstr "Caricamento disco supplementare..." #~ msgid "Driver Disk" #~ msgstr "Disk Driver" #~ msgid "" #~ "This install method requires a driver disk. Please remove the supplemental " #~ "disk currently in your drive and replace it with the Red Hat Modules disk." #~ msgstr "" #~ "Questo metodo d'installazione richiede un disk driver. Rimuovere il disco " #~ "presente nel driver e sostituirlo con il modules disk Red Hat." #~ msgid "" #~ "I failed to mount the floppy. Please insert the Red Hat Module disk, or " #~ "choose Cancel to pick a different installation process." #~ msgstr "" #~ "Impossibile montare il floppy. Inserire il modules disk Red Hat, o " #~ "selezionare Cancella per scegliere una diversa installazione." #~ msgid "" #~ "This install method requires two additional disks. Please remove the boot " #~ "disk currently in your drive and replace it with the Red Hat Supplementary " #~ "Install disk." #~ msgstr "" #~ "Questo metodo d'installazione richiede due dischi aggiuntivi. Sostituire il " #~ "boot disk presente nel drive con il disco Red Hat supplementare" #~ msgid "hd command" #~ msgstr "comando hd" #~ msgid "bad argument to kickstart hd command %s: %s" #~ msgstr "argomento errato per il comando hd kickstart %s: %s" #~ msgid "hd command incomplete" #~ msgstr "comando hd incompleto" #~ msgid "HD device %s not found" #~ msgstr "HD device %s non trovato" #~ msgid "Failed to create /tmp/rhimage symlink: %s" #~ msgstr "Impossibile creare /tmp/rhimage symlink: %s" #~ msgid "url command" #~ msgstr "comando url" #~ msgid "bad argument to kickstart url command %s: %s" #~ msgstr "argomento errato per il comando url kickstart %s: %s" #~ msgid "url command incomplete" #~ msgstr "comando url incompleto" #~ msgid "Mount points must begin with a leading /." #~ msgstr "I mount point devono iniziare con /." #~ msgid "Mount points may not end with a /." #~ msgstr "I mount point non devono terminare con /." #~ msgid "Mount points may only printable characters." #~ msgstr "I mount point devono contenere solo i caratteri stampabili" #~ msgid "System partitions must be on Linux Native partitions." #~ msgstr "Le partizioni di sistema devono essere di tipo Linux nativo." #~ msgid "/usr must be on a Linux Native partition or an NFS volume." #~ msgstr "La partizione /usr deve essere di tipo Linux nativo o NFS" #~ msgid "Edit Network Mount Point" #~ msgstr "Modifica del Network Mount Point" #~ msgid "Making ext2 filesystem on /dev/%s..." #~ msgstr "Creazione di un filesystem ext2 su /dev/%s ..." #~ msgid "Running" #~ msgstr "Esecuzione" #~ msgid "nfs mount failed: %s" #~ msgstr "Mount nfs fallito: %s" #~ msgid "mount failed: %s" #~ msgstr "mount fallito: %s" #~ msgid "" #~ "The partition table on device %s is corrupted. To create new partitions it " #~ "must be initialized. You can specify \"zerombr yes\" in the kickstart file " #~ "to have this done automatically" #~ msgstr "" #~ "La tabella delle partizioni sul device %s e' danneggiata. Per creare nuove " #~ "partizioni bisogna inizializzare. Potete specificare \"zerombr yes\" nel " #~ "file kickstartper ottenere automaticamente questa funzione" #~ msgid "Zero Partition Table" #~ msgstr "Zero Partition Table" #~ msgid "" #~ "bad argument to kickstart zerombr command: %s.\n" #~ "Must be 'on', '1', or 'yes' to enable, or 'off', '0', or 'no' to disable." #~ msgstr "" #~ "argomento errato per il comando kickstart zerombr: %s.\n" #~ "Deve essere 'on',1, o 'yes' per abilitare oppure 'off','0' o 'no' per " #~ "disabilitare." #~ msgid "Clear Partition Command" #~ msgstr "Clear Partition Command" #~ msgid "bad argument to kickstart clearpart command %s: %s" #~ msgstr "argomento errato per il comando kickstart clearpart %s: %s" #~ msgid "Partition Command" #~ msgstr "Partition Command" #~ msgid "bad argument to kickstart part command %s: %s" #~ msgstr "argomento errato per il comando kickstart part %s: %s" #~ msgid "Option Ignored" #~ msgstr "Opzione ignorata" #~ msgid "" #~ "The --maxsize option for the partition %s was ignored. Check that it is " #~ "larger than the --size option." #~ msgstr "" #~ "L'opzione --maxsize per la partizione %s e' stata ignorata. Controllate che " #~ "non sia piu' grande dell'opzione --size." #~ msgid "The mount point %s is already in use." #~ msgstr "Il punto di mount %s e' gia' in uso." #~ msgid "Failed Allocation" #~ msgstr "Allocazione fallita" #~ msgid "The partition %s could not be allocated." #~ msgstr "La partizione %s non puo' essere allocata." #~ msgid "" #~ "There are partitions that can be resized nondestructively to make room for " #~ "your Red Hat Linux installation. Do you want to resize these partitions now?" #~ msgstr "" #~ "Ci sono delle partizioni che possono essere ridimensionate per " #~ "l'installazione di Red Hat Linux. Volete ridimensionare queste partizioni " #~ "ora ?" #~ msgid "Success" #~ msgstr "Terminato" #~ msgid "Bad server response" #~ msgstr "Risposta errata del server" #~ msgid "Server IO error" #~ msgstr "Errore IO del server" #~ msgid "Server timeout" #~ msgstr "Server timeout" #~ msgid "Unable to lookup server host address" #~ msgstr "Impossibilire determinare l'indirizzo del server" #~ msgid "Unable to lookup server host name" #~ msgstr "Impossibilire determinare il nome del server" #~ msgid "Failed to connect to server" #~ msgstr "Connessione al server fallita" #~ msgid "Failed to establish data connection to server" #~ msgstr "Fallita la connessione dati con il server" #~ msgid "IO error to local file" #~ msgstr "Errore IO sul file locale" #~ msgid "Error setting remote server to passive mode" #~ msgstr "Errore nel settare il server remoto in modalita' passiva" #~ msgid "File not found on server" #~ msgstr "File non trovato nel server" #~ msgid "Abort in progress" #~ msgstr "Abort in esecuzione" #~ msgid "Unknown or unexpected error" #~ msgstr "Errore sconosciuto o inaspettato" #~ msgid "Whole disk" #~ msgstr "Intero disco" #~ msgid "Linux swap" #~ msgstr "Linux swap" #~ msgid "Linux native" #~ msgstr "Linux native" #~ msgid "DOS 12-bit FAT" #~ msgstr "DOS 12-bit FAT" #~ msgid "DOS 16-bit <32M" #~ msgstr "DOS 16-bit <32M" #~ msgid "DOS 16-bit >=32" #~ msgstr "DOS 16-bit >=32" #~ msgid "OS/2 HPFS" #~ msgstr "OS/2 HPFS" #~ msgid "Win95 FAT32" #~ msgstr "Win95 FAT32" #~ msgid "Scanning hard drives..." #~ msgstr "Ricerca dischi fissi..." #~ msgid "" #~ "You don't have any hard drives available! You probably forgot to configure a " #~ "SCSI controller." #~ msgstr "" #~ "Non e' stato rilevato nessun disco fisso! Probabilmente avete dimenticato di " #~ "configurare il controller SCSI." #~ msgid "" #~ "To install Red Hat Linux, you must have at least one partition of 150 MB " #~ "dedicated to Linux." #~ msgstr "" #~ "Per installare Red Hat Linux, dovete avere almeno una partizione da 150 MB " #~ "dedicata a Linux." #~ msgid "Partition Disks" #~ msgstr "Partizioni del Disco" #~ msgid "Reboot Needed" #~ msgstr "Reboot necessario" #~ msgid "" #~ "The kernel is unable to read your new partitioning information, probably " #~ "because you modified extended partitions. While this is not critical, you " #~ "must reboot your machine before proceeding. Insert the Red Hat boot disk now " #~ "and press Return to reboot your system.\n" #~ "\n" #~ "If you have a ZIP or JAZ drive, make sure there is a disk in the drive as an " #~ "empty SCSI drive can also cause this problem." #~ msgstr "" #~ "Il kernel non riesce a leggere le nuove partizioni, probabilmente perche' " #~ "sono state modificate le partizioni estese. Dovreste riavviare il vostro " #~ "sistema prima di continuare. Inserire il disco di boot e premere Return per " #~ "riavviare il vostro sistema." #~ msgid "lilo command" #~ msgstr "comando lilo" #~ msgid "bad argument to kickstart lilo command %s: %s" #~ msgstr "argomento non corretto per il comando kickstart lilo %s: %s" #~ msgid "PCMCIA Support" #~ msgstr "Supporto PCMCIA" #~ msgid "" #~ "Do you need to use PCMCIA devices during the install? Answer no to this " #~ "question if only need PCMCIA support after the install. You do not need " #~ "install-time PCMCIA support if you are installing Red Hat Linux on a laptop " #~ "with a built-in CDROM drive." #~ msgstr "" #~ "Avete bisogno di usare periferiche PCMCIA durante l'installazione? " #~ "Rispondete no se avete bisogno del supporto PCMCIA solo dopo " #~ "l'installazione. Non avete bisogno del supporto PCMCIA se state installando " #~ "Red Hat Linux su un laptop con CDROM integrato." #~ msgid "PCMCIA Support Disk" #~ msgstr "PCMCIA Disco di supporto" #~ msgid "" #~ "PCMCIA support requires a PCMCIA support disk. Please remove the boot disk " #~ "currently in your drive and replace it with the Red Hat PCMCIA support disk." #~ msgstr "" #~ "Il supporto PCMCIA richiede un disco supplementare. Sostituite il disco nel " #~ "vostro drive con il disco Red Hat PCMCIA." #~ msgid "Starting PCMCIA services..." #~ msgstr "Attivazione servizi PCMCIA..." #~ msgid "" #~ "\n" #~ "\n" #~ "Type to return to the install program.\n" #~ "\n" #~ msgstr "" #~ "\n" #~ "\n" #~ "Digitare per ritornare nel programma d'installazione.\n" #~ "\n" #~ msgid "No kickstart configuration file server can be found." #~ msgstr "Nessun file di configurazione kickstart e' stato trovato." #~ msgid "I could not mount the kickstart path %s.\n" #~ msgstr "Impossibile montare il percorso kickstart %s.\n" #~ msgid "I could not mount the boot floppy." #~ msgstr "Non posso montare il floppy di boot." #~ msgid "Error opening files for kickstart copy: %s\n" #~ msgstr "Errore di apertura dei file per copiare kickstart: %s\n" #~ msgid "Error copying kickstart file from floppy." #~ msgstr "Errore di copia dei files kickstart dal floppy." #~ msgid "Select installation path" #~ msgstr "Scelta del percorso d'installazione" #~ msgid "Select installation class" #~ msgstr "Scelta della classe d'installazione" #~ msgid "Setup SCSI" #~ msgstr "Setup SCSI" #~ msgid "Setup filesystems" #~ msgstr "Setup filesystem" #~ msgid "Setup swap space" #~ msgstr "Setup spazio di swap" #~ msgid "Find installation files" #~ msgstr "Ricerca file d'installazione" #~ msgid "Choose packages to install" #~ msgstr "Scelta dei pacchetti da installare" #~ msgid "Configure networking" #~ msgstr "Configurazione della rete" #~ msgid "Configure timezone" #~ msgstr "Configurazione del fuso orario" #~ msgid "Configure services" #~ msgstr "Configurazione dei servizi" #~ msgid "Configure printer" #~ msgstr "Configurazione della stampante" #~ msgid "Exit install" #~ msgstr "Uscire dall'installazione" #~ msgid "Find current installation" #~ msgstr "Ricerca installazione corrente" #~ msgid "Scanning packages..." #~ msgstr "Analisi dei pacchetti..." #~ msgid "Install log" #~ msgstr "Log dell'installazione" #~ msgid "Upgrade log" #~ msgstr "Log di aggiornamento" #~ msgid "" #~ "A complete log of your upgrade will be in /tmp/upgrade.log when the upgrade " #~ "is finished. After rebooting, please read it to ensure configuration files " #~ "are properly updated." #~ msgstr "" #~ "L'elenco dei pacchetti aggiornati verra' memorizzato in /tmp/upgrade.log al " #~ "termine dell'aggiornamento. Dopo il reboot verificate con questo file " #~ "l'aggiornamento del sistema." #~ msgid "Rebuilding RPM database..." #~ msgstr "Ricostruzione del database RPM ..." #~ msgid "Rebuild of RPM database failed. You may be out of disk space?" #~ msgstr "" #~ "Ricostruzione del database RPM fallita. Avete abbastanza spazio sul disco ?" #~ msgid "rootpw command" #~ msgstr "comando rootpw" #~ msgid "bad argument to kickstart rootpw command %s: %s" #~ msgstr "argomento errato per il comando rootpw di kickstart %s: %s" #~ msgid "Missing password" #~ msgstr "Password errata" #~ msgid "Unexpected arguments" #~ msgstr "Argomento inaspettato" #~ msgid "Installation Path" #~ msgstr "Percorso d'installazione" #~ msgid "" #~ "Would you like to install a new system or upgrade a system which already " #~ "contains Red Hat Linux 2.0 or later?" #~ msgstr "" #~ "Volete installare un nuovo sistema o aggiornare un sistema che contiene Red " #~ "Hat Linux 2.0 o successivi ?" #~ msgid "" #~ "What type of machine are you installing? For maximum flexibility, choose " #~ "\"Custom\"." #~ msgstr "" #~ "Che tipo di sistema volete installare ? Per maggior flessibilita', " #~ "selezionate\"Custom\"." #~ msgid "Converting RPM database..." #~ msgstr "Conversione database RPM..." #~ msgid "Finding packages to upgrade..." #~ msgstr "Ricerca pacchetti da aggiornare..." #~ msgid "Previous" #~ msgstr "Precedente" #~ msgid "Menu" #~ msgstr "Menu" #~ msgid "" #~ "An error occured during step \"%s\" of the install.\n" #~ "\n" #~ "You may retry that step, return to the previous step in the install, or see " #~ "a menu of installation steps which will allow you to move around in the " #~ "install more freely. It is not recommended to use the menu unless you are " #~ "already familiar with Red Hat Linux. What would you like to do?" #~ msgstr "" #~ "Errore durante la fase \"%s\" dell'installazione.\n" #~ "\n" #~ "Potete riprovare , ritornare alla fase precedente o tornare al menu " #~ "d'installazione. Usate questa opzione (menu) solo se avete una certa " #~ "familiarita' con Red Hat Linux. Cosa volete fare ?" #~ msgid " Continue with install" #~ msgstr "Continuare l'installazione" #~ msgid "" #~ "What step would you like to run? Steps with a * next to them have already " #~ "been completed." #~ msgstr "" #~ "Quali passi volete attivare ? Le fasi con un * sono gia' state completate" #~ msgid "Cancelled" #~ msgstr "Cancellato" #~ msgid "" #~ "I can't go to the previous step from here. You will have to try again." #~ msgstr "Non posso andare al punto precedente da qui. Potete provare ancora." #~ msgid "Insert a blank floppy in the first drive /dev/fd0." #~ msgstr "Inserire un dischetto vuoto nel primo driver /dev/fd0." #~ msgid "file %s missing from source directory" #~ msgstr "file %s perso dalla directory sorgente" #~ msgid "failed to create file %s" #~ msgstr "impossibile creare %s" #~ msgid "error writing to file %s: %s" #~ msgstr "Errore di scrittura del file %s: %s" #~ msgid "error reading from file %s: %s" #~ msgstr "errore di lettura del file %s: %s" #~ msgid "Kernel" #~ msgstr "Kernel" #~ msgid "" #~ "Please insert your boot disk in your first disk drive if it's not already " #~ "present." #~ msgstr "Inserire nel drive il vostro primo disco se non e'gia presente." #~ msgid "Copying kernel from floppy..." #~ msgstr "Trasferimento del kernel dal floppy..." #~ msgid "Unknown command %s on line %d of kickstart file %s." #~ msgstr "Comando %s sconosciuto nella linea %d del file kickstart %s." #~ msgid "Failed to create /mnt/tmp/ks.script: %s" #~ msgstr "Impossibile creare /mnt/tmp/ks.script: %s" #~ msgid "Failed to write ks post script: %s" #~ msgstr "Impossibile scrivere ks post script: %s" #~ msgid "Failed to create symlink for package source." #~ msgstr "Impossibile creare i symlink per i pacchetti sorgenti" #~ msgid "ftp" #~ msgstr "ftp" #~ msgid "I'm having trouble getting %s. Would you like to retry?" #~ msgstr "Ci sono dei problemi con %s. Volete riprovare ?" #~ msgid "SILO" #~ msgstr "SILO" #~ msgid "LILO" #~ msgstr "LILO" #~ msgid "Creating initial ramdisk..." #~ msgstr "Creazione del ramdisk iniziale..." #~ msgid "Device:" #~ msgstr "Device:" #~ msgid "Boot label:" #~ msgstr "Boot label:" #~ msgid "Installing boot loader..." #~ msgstr "Installazione del bootloader... " #~ msgid "Bootable Partitions" #~ msgstr "Partizione bootable" #~ msgid "Creating bootdisk..." #~ msgstr "Creazione del bootdisk..." #~ msgid "Formatting swap space on device %s..." #~ msgstr "Formattazione spazio di swap sul device %s..." #~ msgid "No Swap Space" #~ msgstr "Nessuna area di swap" #~ msgid "" #~ "What partitions would you like to use for swap space? This will destroy any " #~ "information already on the partition." #~ msgstr "" #~ "Quale partizione volete usare per l'area di swap? Questo eliminera' tutti i " #~ "dati esistenti nella partizione." #~ msgid "Active Swap Space" #~ msgstr "Area di swap attiva" #~ msgid "Could not mount automatically selected device." #~ msgstr "Non posso montare automaticamente i device selezionati." #~ msgid "Cannot read /mnt/etc/fstab: %s" #~ msgstr "Non posso leggere /mnt/etc/fstab: %s" #~ msgid "Bad line in /mnt/etc/fstab -- aborting" #~ msgstr "Linea errata in /mnt/etc/fstab -- chiusura" #~ msgid "Ethernet Probe" #~ msgstr "Rilevazione della scheda di rete" #~ msgid "" #~ "The Ethernet probe failed to find a card on your system. Press to " #~ "manually configure one." #~ msgstr "" #~ "Non e' stato possibile rilevare la scheda Ethernet. Premere per\n" #~ "attivare la configuzione manuale." #~ msgid "Static IP address" #~ msgstr "Indirizzo IP statico" #~ msgid "BOOTP" #~ msgstr "BOOTP" #~ msgid "DHCP" #~ msgstr "DHCP" #~ msgid "bad ip number in network command: %s" #~ msgstr "indirizzo ip non corretto nel comando di rete: %s" #~ msgid "kickstart network command is missing ip address" #~ msgstr "indirizzo ip non trovato nel comando di rete kickstart" #~ msgid "" #~ "How should the IP information be set? If your system administrator gave you " #~ "an IP address, choose static IP." #~ msgstr "" #~ "Come volete inizializzare l'indirizzo IP ? Se il vostro\n" #~ "amministratore di sistema vi fornisce un indirizzo IP, scegliete IP statico." #~ msgid "Sending BOOTP request..." #~ msgstr "Invio di un richiesta BOOTP ..." #~ msgid "Cannot create %s: %s\n" #~ msgstr "Non e' possibile creare %s: %s\n" #~ msgid "cannot create network device config file: %s" #~ msgstr "Impossibile creare il dispositivo di configurazione della rete: %s" #~ msgid "cannot open file: %s" #~ msgstr "non e' possibile aprire il file %s" #~ msgid "" #~ "I cannot automatically determine the hostname. Press to enter " #~ "hostname information." #~ msgstr "" #~ "Non e' possibile determinare automaticamente l'hostname. Premere\n" #~ " per inserire le informazioni sul nome dell'host." #~ msgid "" #~ "Please enter your domain name, host name, and the IP addresses of any " #~ "additional nameservers. Your host name should be a fully-qualified host " #~ "name, such as mybox.mylab.myco.com. If you don't have any additional " #~ "nameservers, leave the nameserver entries blank." #~ msgstr "" #~ "Inserire il dominio, il nome dell'host e l'indirizzo IP dei nameserver \n" #~ "secondari. Il nome dell'host deve essere completo, come ad esempio\n" #~ "test.italia.redhat.it. Se non avete nessun nameserver secondario,\n" #~ "lasciate queste entry vuote." #~ msgid "Host name:" #~ msgstr "Nome dell'host:" #~ msgid "Secondary nameserver (IP):" #~ msgstr "Nameserver secondario (IP):" #~ msgid "Tertiary nameserver (IP):" #~ msgstr "Nameserver terziario (IP):" #~ msgid "Configure Network" #~ msgstr "Configurazione della rete" #~ msgid "Keep the current IP configuration" #~ msgstr "Mantenere la configurazione IP corrente" #~ msgid "Reconfigure network now" #~ msgstr "Riconfigurazione della rete" #~ msgid "LAN networking has already been configured. Do you want to:" #~ msgstr "La rete LAN e' gia' stata configurata. Volete:" #~ msgid "" #~ "Do you want to configure LAN (not dialup) networking for your installed " #~ "system?" #~ msgstr "Volete configurare la rete LAN (non dialup) per il vostro sistema ?" #~ msgid "Cannot open components file: %s" #~ msgstr "Impossibile aprire i componenti del file: %s" #~ msgid "Cannot read components file: %s" #~ msgstr "Impossibile leggere i componenti del file: %s" #~ msgid "Comps file is not version 0.1 as expected" #~ msgstr "I file comps non sono la versione 0.1 come richiesto" #~ msgid "bad comps file at line %d" #~ msgstr "errato comps file alla linea %d" #~ msgid "comps Error" #~ msgstr "Errore comps" #~ msgid "missing component name at line %d" #~ msgstr "nome del componente non trovato alla linea %d" #~ msgid "Ignore all" #~ msgstr "Ignora tutto" #~ msgid "package %s at line %d does not exist" #~ msgstr "Il pacchetto %s alla line %d non esiste" #~ msgid "Component %s does not exist.\n" #~ msgstr "Il componente %s non esiste.\n" #~ msgid "Package %s does not exist.\n" #~ msgstr "Il pacchetto %s non esiste.\n" #~ msgid "GNOME" #~ msgstr "GNOME" #~ msgid "" #~ "Would you like to have the GNOME desktop installed? It provides an easy to " #~ "use interface, including a drag and drop capability and an integrated help " #~ "system." #~ msgstr "" #~ "Volete installare GNOME ? GNOME e' un ambiente grafico con funzionalita' di " #~ "drag and drop, semplice da usare, e con un help di sistema integrato ! " #~ msgid "no suggestion" #~ msgstr "nessun suggerimento" #~ msgid "Everything" #~ msgstr "Tutto" #~ msgid "Choose components to install:" #~ msgstr "Scelta dei componenti da installare:" #~ msgid "Components to Install" #~ msgstr "Componenti da Installare" #~ msgid "error opening header file: %s" #~ msgstr "errore di apertura del file principale: %s" #~ msgid "Installed system size:" #~ msgstr "Dimensione del sistema installato:" #~ msgid "Choose a group to examine" #~ msgstr "Scelta di un gruppo da esaminare" #~ msgid "Press F1 for a package description" #~ msgstr "Premere F1 per la descrizione dei pacchetti" #~ msgid "Select Group" #~ msgstr "Scelta di un Gruppo" #~ msgid "(none available)" #~ msgstr "(non disponibile)" #~ msgid "Package:" #~ msgstr "Pacchetti:" #~ msgid "Upgrade Packages" #~ msgstr "Pacchetti da aggiornare" #~ msgid " will give you information on a particular printer type" #~ msgstr "" #~ "premte per avere informazioni su un particolare tipo di stampante" #~ msgid "Configure Printer" #~ msgstr "Configurazione stampante" #~ msgid " will give you information on this printer driver." #~ msgstr "premete per avere informazioni su questo tipo di stampante" #~ msgid "" #~ "You may now configure the paper size and resolution for this printer." #~ msgstr "" #~ "Potete configurare la dimensione della carta e la risoluzione della " #~ "stampante." #~ msgid "Paper Size" #~ msgstr "Pagina Size" #~ msgid "Resolution" #~ msgstr "Risoluzione" #~ msgid "Fix stair-stepping of text?" #~ msgstr "Risolvo stair-stepping del testo?" #~ msgid "You may now configure the color options for this printer." #~ msgstr "Potete configurare le opzioni colore della stampante." #~ msgid "You may now configure the uniprint options for this printer." #~ msgstr "Potete configurare le opzioni uniprint per questa stampante." #~ msgid "Configure Color Depth" #~ msgstr "Configura il Color Depth" #~ msgid "Configure Uniprint Driver" #~ msgstr "Configura il driver Uniprint" #~ msgid "" #~ "What device is your printer connected to (note that /dev/lp0 is equivalent " #~ "to LPT1:)?" #~ msgstr "" #~ "A quale porta e' collegata la stampante ( ricorda che /dev/lp0 = LPT1:) ?" #~ msgid "" #~ "Auto-detected ports:\n" #~ "\n" #~ msgstr "" #~ "Rilevazione automatica della porta:\n" #~ "\n" #~ msgid "Not " #~ msgstr "No" #~ msgid "Detected\n" #~ msgstr "Rilevata\n" #~ msgid "Printer Device:" #~ msgstr "Printer Device:" #~ msgid "Local Printer Device" #~ msgstr "Local Printer Device" #~ msgid "Remote hostname:" #~ msgstr "Hostname remoto:" #~ msgid "Remote queue:" #~ msgstr "Coda remota:" #~ msgid "Remote lpd Printer Options" #~ msgstr "Opzioni stampante lpd remota" #~ msgid "" #~ "To use a remote lpd print queue, you need to supply the hostname of the " #~ "printer server and the queue name on that server which jobs should be placed " #~ "in." #~ msgstr "" #~ "Per usare una stampante lpd remota, dovete fornire l'hostname del printer " #~ "server ed il nome della coda dove verranno inviate le stampe." #~ msgid "Printer Server:" #~ msgstr "Printer Server:" #~ msgid "Print Queue Name:" #~ msgstr "Nome della coda:" #~ msgid "NetWare Printer Options" #~ msgstr "Opzioni Netware Printer" #~ msgid "" #~ "To print to a NetWare printer, you need to provide the NetWare print server " #~ "name (this is not always the same as the machines TCP/IP hostname) as well " #~ "as the print queue name for the printer you wish to access and any " #~ "applicable user name and password." #~ msgstr "" #~ "Per stampare su una stampante NetWare, dovete conoscere il nome del " #~ "Netwareprint server ( questo non e' sempre lo stesso nome come nei server " #~ "TCP/IP ) ed il nome della coda associata alla stampante ed il nome " #~ "dell'utente e password." #~ msgid "SMB server host:" #~ msgstr "SMB server host:" #~ msgid "SMB server IP:" #~ msgstr "SMB server IP:" #~ msgid "Share name:" #~ msgstr "Nome share:" #~ msgid "Workgroup:" #~ msgstr "Workgroup:" #~ msgid "SMB/Windows 95/NT Printer Options" #~ msgstr "SMP/Windows 95/NT Printer Option" #~ msgid "" #~ "To print to a SMB printer, you need to provide the SMB host name (this is " #~ "not always the same as the machines TCP/IP hostname) and possibly the IP " #~ "address of the print server, as well as the share name for the printer you " #~ "wish to access and any applicable user name, password, and workgroup " #~ "information." #~ msgstr "" #~ "Per stampare su una stampante SMB, dovete conoscere il nome dell'host SMB " #~ "(questo puo' essere diverso dal nome del server) e possibilmente l'indirizzo " #~ "IP del print server, il nome della stampante condivisa su cui volete " #~ "stampare, il nome utente/password, e le informazioni sul workgroup." #~ msgid "Spool directory:" #~ msgstr "Directory di spool:" #~ msgid "Standard Printer Options" #~ msgstr "Opzioni standard:" #~ msgid "" #~ "Every print queue (which print jobs are directed to) needs a name (often lp) " #~ "and a spool directory associated with it. What name and directory should be " #~ "used for this queue?" #~ msgstr "" #~ "Ogni coda di stampa (dove sono dirette le stampe) viene identificata da un " #~ "nome (spesso lp) e da uno spool associato. Che nome e directory bisogna " #~ "usare per questa coda ?" #~ msgid "Would you like to configure a printer?" #~ msgstr "Volete configurare una stampante ?" #~ msgid "Would you like to add another printer?" #~ msgstr "Volete aggiungere un'altra stampante ?" #~ msgid "SMB/Windows 95/NT" #~ msgstr "SMB/Windows 95/NT" #~ msgid "NetWare" #~ msgstr "NetWare" #~ msgid "How is this printer connected?" #~ msgstr "Come e' collegata questa stampante ?" #~ msgid "Printer type:" #~ msgstr "Tipo di stampa:" #~ msgid "Queue:" #~ msgstr "Coda:" #~ msgid "Printer device:" #~ msgstr "Printer Device:" #~ msgid "Remote host:" #~ msgstr "Host remoto:" #~ msgid "Share:" #~ msgstr "Share:" #~ msgid "Printer driver:" #~ msgstr "Printer driver:" #~ msgid "Paper size:" #~ msgstr "Paper size:" #~ msgid "Resolution:" #~ msgstr "Risoluzione:" #~ msgid "Uniprint driver:" #~ msgstr "Driver Uniprint:" #~ msgid "" #~ "Please verify that this printer information is correct:\n" #~ "\n" #~ msgstr "" #~ "Verificate che le informazioni della stampante siano corrette:\n" #~ "\n" #~ msgid "Printer device" #~ msgstr "Printer device:" #~ msgid "Verify Printer Configuration" #~ msgstr "Verifica configurazione stampante" #~ msgid "" #~ "\n" #~ "Do you have any more SCSI adapters on your system?" #~ msgstr "" #~ "\n" #~ "Avete qualche altro adattatore SCSI nel vostro sistema?" #~ msgid "Do you have any SCSI adapters?" #~ msgstr "Avete qualche adattatore SCSI?" #~ msgid "SMB server name :" #~ msgstr "Nome server SMB:" #~ msgid "Share volume :" #~ msgstr "Volume condiviso :" #~ msgid "Account name :" #~ msgstr "Nome di account :" #~ msgid "Password :" #~ msgstr "Password :" #~ msgid "" #~ "Please enter the following information:\n" #~ "\n" #~ " o the name or IP number of your SMB server\n" #~ " o the volume to share which contains\n" #~ " Red Hat Linux for your architecture" #~ msgstr "" #~ "Inserire le seguneti informazioni:\n" #~ "\n" #~ " o il nome o l'indirizzo IP del server SMB\n" #~ " o la directory del server che contiene Red \n" #~ " Hat Linux per la vostra architettura" #~ msgid "Password for %s@%s: " #~ msgstr "Password per %s@%s: " #~ msgid "error: %sport must be a number\n" #~ msgstr "errore: la porta %s deve avere un numero\n" #~ msgid "url port must be a number\n" #~ msgstr "la porta url deve avere un numero\n" #~ msgid "logging into %s as %s, pw %s\n" #~ msgstr "loggin in %s come %s, pw %s\n" #~ msgid "failed to open %s\n" #~ msgstr "impossibile aprire %s\n" #~ msgid "failed to create %s\n" #~ msgstr "impossibile creare %s\n" #~ msgid "open of %s failed: %s\n" #~ msgstr "apertura di %s fallita: %s\n" #~ msgid "" #~ "Error transferring file %s:\n" #~ "%s" #~ msgstr "" #~ "Errore di trasferimento del file %s:\n" #~ "%s" #~ msgid "" #~ "An error occurred reading the partition table for the block device %s. The " #~ "error was:" #~ msgstr "" #~ "Rilevato un errore durante la lettra della tabella delle partizioni per il " #~ "dispositivo %s. Errore:" #~ msgid "LAN manager host:" #~ msgstr "Lan manager host:" #~ msgid "LAN manager IP:" #~ msgstr "LAN manager IP:" #~ msgid "LAN Manager Printer Options" #~ msgstr "Opzioni di stampa LAN Manager" #~ msgid "LAN Manager" #~ msgstr "LAN Manager" #~ msgid "RPM install of %s failed: %s" #~ msgstr "Installazione RPM di %s fallita: %s" #~ msgid " will show you a size and description of a package" #~ msgstr " visualizza la dimensione e la descrizione del programma" #~ msgid "Size of all selected packages:" #~ msgstr "Dimensione di tutti i programmi selezionati:" #~ msgid "Select Packages" #~ msgstr "Scelta i pacchetti" #~ msgid "I cannot get file %s: %s\n" #~ msgstr "Impossibile aprire il file %s: %s\n" #~ msgid "I cannot log into machine: %s\n" #~ msgstr "Impossibile connettersi nel sistema %s\n" #~ msgid "" #~ "Would you like to install or configure the SILO bootloader on your system?" #~ msgstr "" #~ "Volete installare o configurare il bootloader SILO nel vostro sistema?" #~ msgid "Other" #~ msgstr "Altro" #~ msgid "" #~ "You cancelled step \"%s\".\n" #~ "\n" #~ msgstr "" #~ "Avete cancellato il punto \"%s\".\n" #~ "\n" #~ msgid "" #~ "An error occured during step \"%s\" of the install.\n" #~ "\n" #~ msgstr "" #~ "Si e' verificato un errore durante lo step \"%s\" dell'installazione.\n" #~ msgid "" #~ "\n" #~ "Would you like to create a bootdisk for your system?" #~ msgstr "" #~ "\n" #~ "Volete creare un bootdisk per il vostro sistema ?" #~ msgid "Please verify...\n" #~ msgstr "Verificate queste informazioni\n" #~ msgid "LILO Installation" #~ msgstr "Installazione di LILO"