# translation of de.po to # Copyright (C) 2001 Red Hat, Inc. # Ronny Buchmann 2004,2005 # Claudia Krug , 2001. # Bernd Groh , 2002,2003,2004. # Andreas Müller , 2003, 2004. # Stefan Hoelldampf , 2003. # Verena , 2004. # Thomas Ritter , 2005. # msgid "" msgstr "" "Project-Id-Version: de\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2005-06-01 15:14-0400\n" "PO-Revision-Date: 2005-06-05 14:27+0200\n" "Last-Translator: Thomas Ritter \n" "Language-Team: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.10.1\n" #: ../anaconda:102 msgid "Starting VNC..." msgstr "Starte VNC ..." #: ../anaconda:137 #, c-format msgid "%s %s installation on host %s" msgstr "%s %s Installation auf Rechner %s" #: ../anaconda:139 #, c-format msgid "%s %s installation" msgstr "%s %s Installation durchführen" #: ../anaconda:159 msgid "Unable to set vnc password - using no password!" msgstr "Kann VNC-Passwort nicht setzen - benutze kein Passwort!" #: ../anaconda:160 msgid "Make sure your password is at least 6 characters in length." msgstr "Das Passwort muss aus mindestens 6 Zeichen bestehen." #: ../anaconda:183 msgid "" "\n" "\n" "WARNING!!! VNC server running with NO PASSWORD!\n" "You can use the vncpassword= boot option\n" "if you would like to secure the server.\n" "\n" msgstr "" "\n" "\n" "WARNUNG!!! VNC Server läuft OHNE PASSWORT!\n" "Sie können die vncpassword= Bootoption\n" "verwenden, wenn Sie den Server sichern wollen.\n" "\n" #: ../anaconda:187 msgid "The VNC server is now running." msgstr "Der VNC Server ist nun in Betrieb." #: ../anaconda:190 #, c-format msgid "Attempting to connect to vnc client on host %s..." msgstr "Versuche zum VNC-Client auf Rechner %s zu verbinden..." #: ../anaconda:204 msgid "Giving up attempting to connect after 50 tries!\n" msgstr "Gebe nach 50 Verbindungsversuchen auf!\n" #: ../anaconda:206 #, c-format msgid "Please manually connect your vnc client to %s to begin the install." msgstr "" "Bitte verbinden Sie Ihren VNC-Client manuell zu %s, um mit der Installation " "zu beginnen." #: ../anaconda:208 msgid "Please manually connect your vnc client to begin the install." msgstr "" "Bitte verbinden Sie Ihren VNC-Client manuell, um mit der Installation zu " "beginnen." #: ../anaconda:212 msgid "Will try to connect again in 15 seconds..." msgstr "Werde Verbindung in 15 Sekunden erneut versuchen..." #: ../anaconda:216 msgid "Connected!" msgstr "Verbunden!" #: ../anaconda:220 #, c-format msgid "Please connect to %s to begin the install..." msgstr "Bitte zu %s verbinden, um mit der Installation zu beginnen..." #: ../anaconda:222 msgid "Please connect to begin the install..." msgstr "Bitte verbinden, um mit der Installation zu beginnen..." #: ../anaconda:583 ../anaconda:766 ../gui.py:241 ../gui.py:1073 #: ../rescue.py:41 ../rescue.py:228 ../rescue.py:308 ../rescue.py:336 #: ../rescue.py:346 ../rescue.py:418 ../rescue.py:424 ../text.py:324 #: ../text.py:493 ../textw/confirm_text.py:26 ../textw/confirm_text.py:54 #: ../textw/constants_text.py:36 ../textw/fdisk_text.py:41 #: ../textw/network_text.py:32 ../textw/network_text.py:178 #: ../textw/network_text.py:409 ../textw/network_text.py:417 #: ../loader2/cdinstall.c:136 ../loader2/cdinstall.c:137 #: ../loader2/cdinstall.c:256 ../loader2/cdinstall.c:259 #: ../loader2/cdinstall.c:376 ../loader2/cdinstall.c:381 #: ../loader2/cdinstall.c:386 ../loader2/cdinstall.c:451 #: ../loader2/dirbrowser.c:139 ../loader2/driverdisk.c:269 #: ../loader2/driverdisk.c:300 ../loader2/driverdisk.c:339 #: ../loader2/driverdisk.c:377 ../loader2/driverdisk.c:390 #: ../loader2/driverdisk.c:404 ../loader2/driverdisk.c:583 #: ../loader2/driverdisk.c:621 ../loader2/driverselect.c:73 #: ../loader2/driverselect.c:213 ../loader2/hdinstall.c:106 #: ../loader2/hdinstall.c:159 ../loader2/hdinstall.c:217 #: ../loader2/hdinstall.c:384 ../loader2/hdinstall.c:435 #: ../loader2/hdinstall.c:470 ../loader2/hdinstall.c:538 #: ../loader2/hdinstall.c:581 ../loader2/hdinstall.c:594 ../loader2/kbd.c:125 #: ../loader2/kickstart.c:121 ../loader2/kickstart.c:131 #: ../loader2/kickstart.c:174 ../loader2/kickstart.c:273 #: ../loader2/kickstart.c:408 ../loader2/lang.c:103 ../loader2/lang.c:380 #: ../loader2/loader.c:308 ../loader2/loader.c:321 ../loader2/loader.c:332 #: ../loader2/loader.c:691 ../loader2/loader.c:869 ../loader2/mediacheck.c:329 #: ../loader2/mediacheck.c:386 ../loader2/mediacheck.c:428 #: ../loader2/method.c:156 ../loader2/method.c:373 ../loader2/method.c:458 #: ../loader2/modules.c:982 ../loader2/net.c:231 ../loader2/net.c:269 #: ../loader2/net.c:536 ../loader2/net.c:897 ../loader2/net.c:920 #: ../loader2/net.c:1069 ../loader2/nfsinstall.c:54 #: ../loader2/nfsinstall.c:201 ../loader2/nfsinstall.c:210 #: ../loader2/nfsinstall.c:248 ../loader2/telnetd.c:84 #: ../loader2/urlinstall.c:67 ../loader2/urlinstall.c:139 #: ../loader2/urlinstall.c:152 ../loader2/urlinstall.c:442 #: ../loader2/urlinstall.c:451 ../loader2/urlinstall.c:462 #: ../loader2/urls.c:172 ../loader2/urls.c:182 ../loader2/urls.c:191 #: ../loader2/urls.c:257 ../loader2/urls.c:322 ../loader2/urls.c:327 #: ../loader2/urls.c:333 ../loader2/urls.c:447 msgid "OK" msgstr "OK" #: ../anaconda:631 msgid "Unknown Error" msgstr "Unbekannter Fehler" #: ../anaconda:634 #, c-format msgid "Error pulling second part of kickstart config: %s!" msgstr "Fehler beim Lesen des zweiten Teils der Kickstart-Datei %s!" #: ../anaconda:750 msgid "" "You do not have enough RAM to use the graphical installer. Starting text " "mode." msgstr "" "Ihnen steht nicht genügend Arbeitsspeicher (RAM) zur Verfügung, um die " "grafische Installation verwenden zu können. Der Textmodus wird gestartet." #: ../anaconda:803 msgid "Install class forcing text mode installation" msgstr "Installationsklasse erfordert Installation im Textmodus" #: ../anaconda:830 msgid "No video hardware found, assuming headless" msgstr "Keine Grafik-Hardware gefunden, headless wird angenommen" #: ../anaconda:841 ../anaconda:1092 msgid "Unable to instantiate a X hardware state object." msgstr "Kann kein X Hardware Statusobjekt instantiieren." #: ../anaconda:865 msgid "Graphical installation not available... Starting text mode." msgstr "" "Die Installation im Grafikmodus ist nicht verfügbar ... Der Textmodus wird " "gestartet." #: ../anaconda:880 msgid "" "No mouse was detected. A mouse is required for graphical installation. " "Starting text mode." msgstr "" "Es konnte keine Maus gefunden werden. Eine Maus ist jedoch für die " "Installation im Grafikmodus erforderlich. Der Textmodus wird gestartet." #: ../anaconda:890 #, c-format msgid "Detected mouse type: %s" msgstr "Erkannter Maustyp: %s" #: ../anaconda:894 #, c-format msgid "Using mouse type: %s" msgstr "Verwende Maustyp: %s" #: ../anaconda:998 msgid "Starting graphical installation..." msgstr "Grafische Installation wird gestartet..." #: ../autopart.py:971 msgid "Could not allocate cylinder-based partitions as primary partitions" msgstr "" "Es konnten keine Zylinder-basierten Partitionen als primäre Partitionen " "zugewiesen werden" #: ../autopart.py:974 msgid "Could not allocate partitions as primary partitions" msgstr "Partitionen konnten nicht als primäre Partitionen zugewiesen werden" #: ../autopart.py:977 msgid "Could not allocate cylinder-based partitions" msgstr "Zylinderbasierte Partitionen konnten nicht zugewiesen werden" #: ../autopart.py:980 msgid "Could not allocate partitions" msgstr "Partitionen konnten nicht zugewiesen werden" #: ../autopart.py:1042 #, python-format msgid "" "Boot partition %s doesn't belong to a BSD disk label. SRM won't be able to " "boot from this partition. Use a partition belonging to a BSD disk label or " "change this device disk label to BSD." msgstr "" "Die Boot-Partition %s gehört zu keiner BSD Plattenkennung. SRM kann von " "dieser Partition nicht booten. Benutzen Sie eine Partition, die zu einer BSD " "Plattenkennung gehört, oder ändern Sie die Plattenkennung dieses Geräts zu " "BSD." #: ../autopart.py:1044 #, python-format msgid "" "Boot partition %s doesn't belong to a disk with enough free space at its " "beginning for the bootloader to live on. Make sure that there's at least 5MB " "of free space at the beginning of the disk that contains /boot" msgstr "" "Die Boot-Partition %s gehört zu keiner Platte mit genügend freiem Speicher " "am Anfang, auf welchem der Bootloader Platz finden könnte. Stellen Sie " "sicher, dass mindestens 5MB freier Speicher am Anfang der Platte sind, die /" "boot enthält." #: ../autopart.py:1046 #, python-format msgid "" "Boot partition %s isn't a VFAT partition. EFI won't be able to boot from " "this partition." msgstr "" "Die Boot-Partition %s ist keine VFAT Partition. EFI kann von dieser " "Partition nicht booten." #: ../autopart.py:1048 msgid "" "Boot partition isn't located early enough on the disk. OpenFirmware won't " "be able to boot this installation." msgstr "" "Die Boot-Partition befindet sich nicht weit genug am Anfang der Festplatte. " "OpenFirmware kann diese Installation nicht booten." #: ../autopart.py:1055 #, python-format msgid "Boot partition %s may not meet booting constraints for your architecture." msgstr "" "Möglicherweise erfüllt die Bootpartition %s nicht die Voraussetzungen zum " "Booten Ihrer Architektur." #: ../autopart.py:1081 #, python-format msgid "" "Adding this partition would not leave enough disk space for already " "allocated logical volumes in %s." msgstr "" "Durch das Hinzufügen dieser Partition würde nicht genügend Platz für bereits " "zugeordnete logische Datenträger (Logical Volumes) in %s gelassen." #: ../autopart.py:1270 msgid "Requested Partition Does Not Exist" msgstr "Die angeforderte Partition existiert nicht" #: ../autopart.py:1271 #, python-format msgid "" "Unable to locate partition %s to use for %s.\n" "\n" "Press 'OK' to reboot your system." msgstr "" "Die Partition %s für die Verwendung für %s konnte nicht gefunden werden.\n" "\n" "Drücken Sie 'OK', um Ihr System neu zu booten." #: ../autopart.py:1298 msgid "Requested Raid Device Does Not Exist" msgstr "Das angeforderte RAID-Gerät existiert nicht" #: ../autopart.py:1299 #, python-format msgid "" "Unable to locate raid device %s to use for %s.\n" "\n" "Press 'OK' to reboot your system." msgstr "" "Das RAID-Gerät %s zur Verwendung mit %s konnte nicht gefunden werden.\n" "\n" "Drücken Sie 'OK', um Ihr System neu zu starten." #: ../autopart.py:1330 msgid "Requested Volume Group Does Not Exist" msgstr "Der angeforderte Datenträgerverbund (Volume Group) existiert nicht" #: ../autopart.py:1331 #, python-format msgid "" "Unable to locate volume group %s to use for %s.\n" "\n" "Press 'OK' to reboot your system." msgstr "" "Der Datenträgerverbund (Volume Group) %s zur Verwendung mit %s konnte\n" " nicht gefunden werden.\n" "\n" "Drücken Sie 'OK', um Ihr System neu zu starten." #: ../autopart.py:1368 msgid "Requested Logical Volume Does Not Exist" msgstr "Der angeforderte logische Datenträger (Logical Volume) existiert nicht" #: ../autopart.py:1369 #, python-format msgid "" "Unable to locate logical volume %s to use for %s.\n" "\n" "Press 'OK' to reboot your system." msgstr "" "Der logische Datenträger (Logical Volume) %s zur Verwendung mit %s\n" "konnte nicht gefunden werden.\n" "\n" "Drücken Sie 'OK', um Ihr System neu zu starten." #: ../autopart.py:1483 ../autopart.py:1531 msgid "Automatic Partitioning Errors" msgstr "Fehler beim automatischen Partitionieren" #: ../autopart.py:1484 #, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "Press 'OK' to reboot your system." msgstr "" "Die folgenden Fehler traten bei der Partitionierung auf:\n" "\n" "%s\n" "\n" "Drücken Sie 'OK', um Ihr System neu zu starten." #: ../autopart.py:1494 msgid "Warnings During Automatic Partitioning" msgstr "Warnungen während des automatischen Partitionierens" #: ../autopart.py:1495 #, python-format msgid "" "Following warnings occurred during automatic partitioning:\n" "\n" "%s" msgstr "" "Beim automatischen Partitionieren gab es mehrere Warnungen:\n" "\n" "%s" #: ../autopart.py:1508 ../autopart.py:1525 msgid "" "\n" "\n" "Press 'OK' to reboot your system." msgstr "" "\n" "\n" "Klicken Sie auf 'OK', um das System neu zu starten." #: ../autopart.py:1509 ../iw/partition_gui.py:995 #: ../textw/partition_text.py:225 msgid "Error Partitioning" msgstr "Fehler bei der Partitionierung" #: ../autopart.py:1510 #, python-format msgid "" "Could not allocate requested partitions: \n" "\n" "%s.%s" msgstr "" "Die angeforderten Partitionen konnten nicht zugewiesen werden:\n" "\n" "%s.%s" #: ../autopart.py:1527 msgid "" "\n" "\n" "You can choose a different automatic partitioning option, or click 'Back' to " "select manual partitioning.\n" "\n" "Press 'OK' to continue." msgstr "" "\n" "\n" "Sie können eine andere Option für das automatische Partitionieren wählen\n" "oder aber manuell partitionieren. Klicken Sie hierzu auf 'Zurück'.\n" "\n" "Klicken Sie auf 'OK', um fortzufahren." #: ../autopart.py:1532 #, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "This can happen if there is not enough space on your hard drive(s) for the " "installation.%s" msgstr "" "Beim Partitionieren traten die folgenden Fehler auf:\n" "\n" "%s\n" "\n" "Dies kann vorkommen, wenn für die Installation nicht genügend Platz auf der " "Festplatte vorhanden ist.%s" #: ../autopart.py:1543 msgid "Unrecoverable Error" msgstr "Schwerwiegender Fehler" #: ../autopart.py:1544 msgid "Your system will now be rebooted." msgstr "Ihr System wird nun neu gestartet." #: ../autopart.py:1690 ../bootloader.py:179 ../gui.py:1070 ../image.py:475 #: ../packages.py:446 ../partedUtils.py:289 ../partedUtils.py:319 #: ../partedUtils.py:844 ../partedUtils.py:901 ../upgrade.py:328 #: ../upgrade.py:439 ../upgrade.py:491 ../upgrade.py:514 ../upgrade.py:554 #: ../iw/blpasswidget.py:145 ../iw/bootloader_advanced_gui.py:42 #: ../iw/bootloader_main_gui.py:92 ../iw/fdasd_gui.py:93 #: ../iw/upgrade_swap_gui.py:200 ../iw/upgrade_swap_gui.py:208 #: ../iw/upgrade_swap_gui.py:215 ../iw/zfcp_gui.py:248 #: ../textw/bootloader_text.py:125 ../textw/bootloader_text.py:460 #: ../textw/fdasd_text.py:84 ../textw/partition_text.py:229 #: ../textw/upgrade_text.py:177 ../loader2/loader.c:363 msgid "Warning" msgstr "Warnung" #: ../autopart.py:1696 msgid "" "Automatic Partitioning sets partitions based on the selected installation " "type. You also can customize the partitions once they have been created.\n" "\n" "The manual disk partitioning tool, Disk Druid, allows you to create " "partitions in an interactive environment. You can set the file system types, " "mount points, partition sizes, and more." msgstr "" "Bei der automatischen Partitionierung werden Ihre Partitionen auf der Basis " "der gewählten Installationsart eingerichtet. Sie können die Partitionen auch " "nach der Erstellung Ihren Bedürfnissen anpassen.\n" "\n" "Mit dem manuellen Festplatten-Partitionierungswerkzeug Disk Druid können Sie " "Ihre Partitionen in einer interaktiven Umgebung einrichten. Sie können\n" "Dateisystemtypen, Einhängepunkte, Größen und anderes einstellen." #: ../autopart.py:1707 msgid "" "Before automatic partitioning can be set up by the installation program, you " "must choose how to use the space on your hard drives." msgstr "" "Bevor das Installationsprogramm die automatische Partitionierung vornimmt, " "müssen Sie festlegen, wie der Speicherplatz auf der Festplatte verwendet " "wird." #: ../autopart.py:1712 msgid "Remove all partitions on this system" msgstr "Alle Partitionen in diesem System entfernen" #: ../autopart.py:1713 msgid "Remove all Linux partitions on this system" msgstr "Alle Linux-Partitionen auf diesem System entfernen" #: ../autopart.py:1714 msgid "Keep all partitions and use existing free space" msgstr "Alle Partitionen erhalten und freien Platz verwenden" #: ../autopart.py:1716 #, python-format msgid "" "You have chosen to remove all partitions (ALL DATA) on the following drives:%" "s\n" "Are you sure you want to do this?" msgstr "" "Sie haben gewählt, dass alle Partitionen (ALLE DATEN) auf folgenden " "Festplatten gelöscht werden sollen: %s\n" "Möchten Sie dies wirklich?" #: ../autopart.py:1720 #, python-format msgid "" "You have chosen to remove all Linux partitions (and ALL DATA on them) on the " "following drives:%s\n" "Are you sure you want to do this?" msgstr "" "Sie haben gewählt, dass alle Linux-Partitionen (und ALLE darauf vorhandenen " "DATEN) auf folgenden Festplatten gelöscht werden sollen:%s\n" "Möchten Sie dies wirklich?" #: ../bootloader.py:118 msgid "Bootloader" msgstr "Bootloader" #: ../bootloader.py:118 msgid "Installing bootloader..." msgstr "Bootloader wird installiert..." #: ../bootloader.py:180 msgid "" "No kernel packages were installed on your system. Your boot loader " "configuration will not be changed." msgstr "" "In Ihrem System wurden keine Kernel-Pakete installiert. Die Konfiguration " "Ihres Bootloaders wird nicht geändert." #: ../cmdline.py:42 msgid "Completed" msgstr "Abgeschlossen" #: ../cmdline.py:47 msgid "In progress... " msgstr "In Arbeit... " #: ../cmdline.py:68 msgid "Can't have a question in command line mode!" msgstr "Keine Frage im Kommandozeilenmodus möglich!" #: ../cmdline.py:87 msgid "Parted exceptions can't be handled in command line mode!" msgstr "Der Kommandozeilenmodus kann mit Parted Ausnahmefehlern nicht umgehen!" #: ../cmdline.py:133 #, python-format msgid "Done [%d/%d]" msgstr "Fertig [%d/%d]" #: ../cmdline.py:139 #, python-format msgid "Installing %s-%s-%s... " msgstr "%s-%s-%s wird installiert..." #: ../constants.py:73 #, python-format msgid "" "An unhandled exception has occurred. This is most likely a bug. Please " "copy the full text of this exception or save the crash dump to a floppy then " "file a detailed bug report against anaconda at %s" msgstr "" "Ein außergewöhnlicher Zustand ist eingetreten. Dies weist wahrscheinlich auf " "einen Fehler hin. Kopieren Sie den vollständigen Text der angezeigten " "Meldung oder sichern Sie den Fehlerbericht auf einer Diskette, und reichen " "Sie einen detaillierten Fehlerbericht für anaconda unter %s ein." #: ../constants.py:80 #, python-format msgid "" "An unhandled exception has occurred. This is most likely a bug. Please " "copy the full text of this exception and file a detailed bug report against " "anaconda at %s" msgstr "" "Ein außergewöhnlicher Zustand ist eingetreten. Dies weist wahrscheinlich auf " "einen Fehler hin. Kopieren Sie den vollständigen Text der angezeigten " "Meldung und reichen Sie detaillierten Fehlerbericht für anaconda unter %s " "ein." #: ../exception.py:232 ../gui.py:546 ../text.py:226 msgid "Exception Occurred" msgstr "Ein außergewöhnlicher Fehler ist aufgetreten" # ../comps/comps-master:483 #: ../exception.py:300 msgid "Dump Written" msgstr "Ein Dump wurde geschrieben" #: ../exception.py:301 msgid "" "Your system's state has been successfully written to the floppy. Your system " "will now be reset." msgstr "" "Der Zustand Ihres Systems ist erfolgreich auf die Diskette geschrieben " "worden. Ihr System wird nun neu gestartet." #: ../firewall.py:54 msgid "Remote Login (SSH)" msgstr "Fernanmeldung (SSH)" #: ../firewall.py:55 msgid "Web Server (HTTP, HTTPS)" msgstr "WWW Server (HTTP, HTTPS)" #: ../firewall.py:56 msgid "File Transfer (FTP)" msgstr "Dateiübertragung (FTP)" #: ../firewall.py:58 msgid "Mail Server (SMTP)" msgstr "Mail Server (SMTP)" #: ../floppy.py:103 msgid "Unable to make boot floppy" msgstr "Es konnte keine Bootdiskette erstellt werden." #: ../floppy.py:104 msgid "" "The size of the kernel modules needed for your machine make it impossible to " "create a boot disk that will fit on a floppy diskette." msgstr "" "Aufgrund der Größe der Kernelmodule für Ihren Rechner ist es nicht möglich, " "eine Bootdiskette zu erstellen." #: ../floppy.py:113 msgid "Insert a floppy disk" msgstr "Legen Sie eine Diskette ein." #: ../floppy.py:114 msgid "" "Please remove any diskettes from the floppy drive, and insert the floppy " "diskette that is to contain the boot disk.\n" "\n" "All data will be ERASED during creation of the boot disk." msgstr "" "Nehmen Sie eventuelle Disketten aus dem Laufwerk und legen Sie die Diskette " "ein, mit der Sie die Bootdiskette erstellen.\n" "\n" "Beim Anlegen der Bootdiskette werden sämtliche Daten auf der Diskette " "GELÖSCHT." #: ../floppy.py:118 ../packages.py:456 msgid "_Cancel" msgstr "_Abbrechen" #: ../floppy.py:118 msgid "_Make boot disk" msgstr "Bootdiskette _erstellen" #: ../floppy.py:129 ../floppy.py:154 ../floppy.py:169 ../floppy.py:200 #: ../fsset.py:607 ../fsset.py:1349 ../fsset.py:1387 ../fsset.py:1398 #: ../fsset.py:1448 ../fsset.py:1459 ../fsset.py:1494 ../fsset.py:1544 #: ../fsset.py:1588 ../fsset.py:1607 ../harddrive.py:165 ../image.py:154 #: ../image.py:192 ../image.py:328 ../image.py:532 ../packages.py:162 #: ../packages.py:175 ../packages.py:184 ../packages.py:196 ../packages.py:432 #: ../packages.py:630 ../packages.py:729 ../partIntfHelpers.py:403 #: ../partedUtils.py:661 ../upgrade.py:359 ../upgrade.py:384 ../upgrade.py:411 #: ../iw/osbootwidget.py:216 ../iw/osbootwidget.py:225 #: ../iw/raid_dialog_gui.py:605 ../iw/raid_dialog_gui.py:644 #: ../textw/fdasd_text.py:73 ../textw/upgrade_text.py:165 #: ../textw/upgrade_text.py:172 ../loader2/cdinstall.c:137 #: ../loader2/cdinstall.c:451 ../loader2/driverdisk.c:339 #: ../loader2/driverdisk.c:377 ../loader2/driverdisk.c:404 #: ../loader2/driverdisk.c:476 ../loader2/hdinstall.c:106 #: ../loader2/hdinstall.c:159 ../loader2/hdinstall.c:217 #: ../loader2/hdinstall.c:435 ../loader2/hdinstall.c:538 #: ../loader2/hdinstall.c:581 ../loader2/hdinstall.c:594 #: ../loader2/kickstart.c:273 ../loader2/lang.c:103 ../loader2/loader.c:332 #: ../loader2/loader.c:691 ../loader2/mediacheck.c:329 #: ../loader2/mediacheck.c:386 ../loader2/method.c:156 ../loader2/method.c:373 #: ../loader2/method.c:458 ../loader2/nfsinstall.c:201 #: ../loader2/nfsinstall.c:210 ../loader2/telnetd.c:84 #: ../loader2/urlinstall.c:67 ../loader2/urlinstall.c:139 #: ../loader2/urlinstall.c:152 ../loader2/urls.c:172 ../loader2/urls.c:182 #: ../loader2/urls.c:191 ../loader2/urls.c:322 ../loader2/urls.c:327 msgid "Error" msgstr "Fehler" #: ../floppy.py:130 ../floppy.py:155 msgid "" "An error occurred while making the boot disk. Please make sure that there is " "a floppy in the first floppy drive." msgstr "" "Beim Erstellen der Bootdiskette ist ein Fehler aufgetreten. Stellen Sie " "sicher, dass sich im ersten Diskettenlaufwerk Ihres Computers eine Diskette " "befindet." #: ../floppy.py:141 msgid "Creating" msgstr "Erstellen" #: ../floppy.py:141 msgid "Creating boot disk..." msgstr "Bootdiskette wird erstellt..." #: ../floppy.py:170 msgid "" "An error occurred while attempting to verify the boot disk. Please make " "sure that you have a good floppy in the first floppy drive." msgstr "" "Beim Überprüfen der Bootdiskette ist ein Fehler aufgetreten. Bitte stellen " "Sie sicher, dass sich im ersten Diskettenlaufwerk eine unbeschädigte " "Diskette befindet." #: ../floppy.py:201 msgid "" "Your boot floppy appears to be invalid. This is likely due to a bad " "floppy. Please make sure that you have a good floppy in the first floppy " "drive." msgstr "" "Ihre Bootdiskette scheint ungültig zu sein. Dies liegt wahrscheinlich an " "einer fehlerhaften Diskette. Stellen Sie sicher, dass sich im ersten " "Diskettenlaufwerk Ihres Computers eine unbeschädigte Diskette befindet." #: ../fsset.py:182 msgid "Checking for Bad Blocks" msgstr "Auf defekte Blöcke überprüfen" #: ../fsset.py:183 #, python-format msgid "Checking for bad blocks on /dev/%s..." msgstr "Überprüfe /dev/%s auf defekte Blöcke..." #: ../fsset.py:608 #, python-format msgid "" "An error occurred migrating %s to ext3. It is possible to continue without " "migrating this file system if desired.\n" "\n" "Would you like to continue without migrating %s?" msgstr "" "Bei der Migration von %s nach ext3 ist ein Fehler aufgetreten. Es ist jedoch " "auch möglich, ohne Migration des Dateisystems fortzufahren.\n" "\n" "Wollen Sie ohne die Migration von %s fortfahren?" #: ../fsset.py:1257 msgid "RAID Device" msgstr "RAID-Gerät" #: ../fsset.py:1261 ../fsset.py:1267 msgid "Apple Bootstrap" msgstr "Apple Bootstrap" #: ../fsset.py:1272 ../partitions.py:869 msgid "PPC PReP Boot" msgstr "PPC PReP Boot" #: ../fsset.py:1275 msgid "First sector of boot partition" msgstr "Erster Sektor der Bootpartition" #: ../fsset.py:1276 msgid "Master Boot Record (MBR)" msgstr "Master Boot Record (MBR)" #: ../fsset.py:1350 #, python-format msgid "" "An error occurred trying to initialize swap on device %s. This problem is " "serious, and the install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "Beim Initialisieren des Swap-Bereichs auf Gerät %s ist ein Fehler " "aufgetreten. Hierbei handelt es sich um ein schwerwiegendes Problem, und die " "Installation kann nicht fortgesetzt werden.\n" "\n" "Drücken Sie die , um Ihr System neu zu booten." #: ../fsset.py:1388 #, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "The /etc/fstab on your upgrade partition does not reference a valid swap " "partition.\n" "\n" "Press OK to reboot your system." msgstr "" "Fehler beim Aktivieren des Swap-Geräts %s: %s\n" "\n" "Die Datei /etc/fstab enthält eine ungültige Swap-Partition.\n" "\n" "Drücken Sie OK, um Ihr System neu zu starten." #: ../fsset.py:1399 #, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "This most likely means this swap partition has not been initialized.\n" "\n" "Press OK to reboot your system." msgstr "" "Fehler beim Aktivieren des Swap-Geräts %s: %s\n" "\n" "Das heißt, dass diese Swap-Partition nicht initialisiert wurde.\n" "\n" "Drücken Sie OK, um Ihr System neu zu starten." #: ../fsset.py:1449 #, python-format msgid "" "Bad blocks have been detected on device /dev/%s. We do not recommend you use " "this device.\n" "\n" "Press to reboot your system" msgstr "" "Auf Gerät /dev/%s wurden defekte Blöcke ermittelt. Sie sollten daher dieses " "Gerät nicht verwenden.\n" "\n" "Drücken Sie die , um Ihr System neu zu starten." #: ../fsset.py:1460 #, python-format msgid "" "An error occurred searching for bad blocks on %s. This problem is serious, " "and the install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "Beim Suchen nach defekten Blöcken auf %s ist ein Fehler aufgetreten. Hierbei " "handelt es sich um ein schwerwiegendes Problem, und die Installation kann " "nicht fortgesetzt werden.\n" "\n" "Drücken Sie die , um Ihr System neu zu starten." #: ../fsset.py:1495 #, python-format msgid "" "An error occurred trying to format %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "Beim Formatieren von %s ist ein Fehler aufgetreten. Hierbei handelt es sich " "um ein schwerwiegendes Problem, und die Installation kann nicht fortgesetzt " "werden.\n" "\n" "Drücken Sie die , um Ihr System neu zu starten." #: ../fsset.py:1545 #, python-format msgid "" "An error occurred trying to migrate %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "Bei der Migration von %s ist ein Fehler aufgetreten. Hierbei handelt es sich " "um ein schwerwiegendes Problem, und die Installation kann nicht fortgesetzt " "werden.\n" "\n" "Drücken Sie die , um Ihr System neu zu starten." #: ../fsset.py:1566 ../fsset.py:1575 msgid "Invalid mount point" msgstr "Unzulässiger Einhängepunkt" #: ../fsset.py:1567 #, python-format msgid "" "An error occurred when trying to create %s. Some element of this path is " "not a directory. This is a fatal error and the install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "Während des Versuchs %s zu erzeugen, ist ein Fehler aufgetreten. Ein Element " "in diesem Pfad ist kein Verzeichnis. Dies ist ein schwerwiegender Fehler. " "Die Installation kann nicht fortgesetzt werden.\n" "\n" "Drücken Sie die , um Ihr System neu zu starten." #: ../fsset.py:1576 #, python-format msgid "" "An error occurred when trying to create %s: %s. This is a fatal error and " "the install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "Während des Versuchs %s zu erzeugen, ist ein Fehler aufgetreten: %s. Dies " "ist ein schwerwiegender Fehler. Die Installation kann kann nicht " "fortgesetztwerden.\n" "\n" "Drücken Sie die , um Ihr System neu zu starten." #: ../fsset.py:1589 #, python-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "This most likely means this partition has not been formatted.\n" "\n" "Press OK to reboot your system." msgstr "" "Fehler beim Einhängen des Geräts %s als %s: %s\n" "\n" "Das heißt, dass diese Partition nicht formatiert worden ist.\n" "\n" "Drücken Sie OK, um Ihr System neu zu starten." #: ../fsset.py:1608 msgid "" "Error finding / entry.\n" "\n" "This is most likely means that your fstab is incorrect.\n" "\n" "Press OK to reboot your system." msgstr "" "Fehler beim Suchen des / Eintrags.\n" "\n" "Höchstwahrscheinlich ist Ihre fstab nicht korrekt.\n" "\n" "Drücken Sie OK, um Ihr System neu zu starten." #: ../fsset.py:2272 msgid "Duplicate Labels" msgstr "Doppelte Labels" #: ../fsset.py:2273 #, python-format msgid "" "Multiple devices on your system are labelled %s. Labels across devices must " "be unique for your system to function properly.\n" "\n" "Please fix this problem and restart the installation process." msgstr "" "Mehrere Geräte auf Ihrem System haben das Label %s. Labels müssen über Ihre " "Geräte hinweg eindeutig sein, um fehlerfrei zu arbeiten.\n" "\n" "Bitte beheben Sie das Problem und starten Sie den Installationsprozess neu." #: ../fsset.py:2280 ../gui.py:727 ../gui.py:1183 ../image.py:96 #: ../image.py:485 ../packages.py:457 ../packages.py:1560 #: ../iw/confirm_gui.py:67 ../iw/confirm_gui.py:101 #: ../textw/confirm_text.py:38 ../textw/confirm_text.py:66 msgid "_Reboot" msgstr "Neu sta_rten" #: ../fsset.py:2534 msgid "Formatting" msgstr "Formatieren" #: ../fsset.py:2535 #, python-format msgid "Formatting %s file system..." msgstr "Dateisystem %s wird formatiert..." #: ../gui.py:107 msgid "An error occurred copying the screenshots over." msgstr "Beim Kopieren der Bildschirmfotos ist ein Fehler aufgetreten." #: ../gui.py:119 msgid "Screenshots Copied" msgstr "Bildschirmfotos kopiert" #: ../gui.py:120 msgid "" "The screenshots have been saved into the directory:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "You can access these when you reboot and login as root." msgstr "" "Die Bildschirmfotos wurden in das folgende Verzeichnis kopiert:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "Sie können auf diese zugreifen, wenn Sie neustarten und sich als root " "anmelden." #: ../gui.py:164 msgid "Saving Screenshot" msgstr "Speichere Bildschirmfoto" #: ../gui.py:165 #, python-format msgid "A screenshot named '%s' has been saved." msgstr "Ein Bildschirmfoto mit dem Namen '%s' wurde gespeichert." #: ../gui.py:168 msgid "Error Saving Screenshot" msgstr "Fehler beim Speichern des Bildschirmfotos" #: ../gui.py:169 msgid "" "An error occurred while saving the screenshot. If this occurred during " "package installation, you may need to try several times for it to succeed." msgstr "" "Ein Fehler ist beim Speichern des Bildschirmfotos aufgetreten. Sollte dies " "während der Installation von Paketen aufgetreten sein, müssen Sie dies " "eventuell mehrmals versuchen." #: ../gui.py:238 ../text.py:321 msgid "Fix" msgstr "Fix" #: ../gui.py:239 ../rescue.py:180 ../text.py:322 ../textw/bootdisk_text.py:22 #: ../textw/bootloader_text.py:70 ../textw/constants_text.py:48 #: ../textw/upgrade_text.py:254 ../loader2/driverdisk.c:519 #: ../loader2/driverdisk.c:530 ../loader2/hdinstall.c:330 #: ../loader2/loader.c:363 msgid "Yes" msgstr "Ja" #: ../gui.py:240 ../rescue.py:180 ../rescue.py:182 ../text.py:323 #: ../textw/bootdisk_text.py:22 ../textw/bootdisk_text.py:35 #: ../textw/bootloader_text.py:70 ../textw/constants_text.py:52 #: ../textw/upgrade_text.py:254 ../textw/upgrade_text.py:261 #: ../loader2/driverdisk.c:519 ../loader2/driverdisk.c:530 #: ../loader2/loader.c:363 msgid "No" msgstr "Nein" #: ../gui.py:242 ../text.py:325 ../loader2/net.c:274 ../loader2/net.c:587 msgid "Retry" msgstr "Wiederholen" #: ../gui.py:243 ../text.py:326 msgid "Ignore" msgstr "Übergehen" #: ../gui.py:244 ../gui.py:638 ../partIntfHelpers.py:233 #: ../partIntfHelpers.py:526 ../text.py:111 ../text.py:112 ../text.py:283 #: ../text.py:285 ../text.py:327 ../iw/bootloader_advanced_gui.py:48 #: ../iw/bootloader_main_gui.py:96 ../textw/bootloader_text.py:200 #: ../textw/constants_text.py:40 ../textw/userauth_text.py:88 #: ../loader2/dirbrowser.c:139 ../loader2/driverdisk.c:270 #: ../loader2/loader.c:321 msgid "Cancel" msgstr "Abbrechen" #: ../gui.py:547 tmp/anaconda.glade.h:4 msgid "_Debug" msgstr "Fehler_diagnose" #: ../gui.py:549 msgid "_Save to floppy" msgstr "_Speichere auf Diskette" #: ../gui.py:722 ../text.py:269 #, python-format msgid "" "The following error was found while parsing your kickstart configuration:\n" "\n" "%s" msgstr "" "Bei der syntaktischen Analyse der Schnellstart-Konfiguration ('kickstart') " "trat folgender Fehler auf:\n" "\n" "%s" #: ../gui.py:724 ../text.py:271 msgid "Error Parsing Kickstart Config" msgstr "" "Fehler bei der syntaktischen Analyse der Schnellstart-Konfiguration " "('kickstart')" #: ../gui.py:732 ../text.py:281 msgid "" "Please insert a floppy now. All contents of the disk will be erased, so " "please choose your diskette carefully." msgstr "" "Legen Sie eine Diskette ein. Da diese Diskette vollständig gelöscht wird, " "sollten Sie eine Diskette auswählen, die keine wichtigen Daten enthält." #: ../gui.py:847 msgid "default:LTR" msgstr "Standard:LTR" #: ../gui.py:915 ../iw/release_notes_viewer_gui.py:44 msgid "Release notes are missing.\n" msgstr "Es konnten keine Release Notes gefunden werden.\n" #: ../gui.py:1071 msgid "The release notes are missing." msgstr "Es konnten keine Release Notes gefunden werden." #: ../gui.py:1170 msgid "Error!" msgstr "Fehler!" #: ../gui.py:1171 #, python-format msgid "" "An error occurred when attempting to load an installer interface component.\n" "\n" "className = %s" msgstr "" "Beim Laden einer Installer Schnittstellen-Komponente ist ein Fehler " "aufgetreten.\n" "\n" "className = %s" #: ../gui.py:1175 ../gui.py:1180 ../packages.py:190 ../packages.py:201 #: ../packages.py:635 ../packages.py:1552 ../packages.py:1557 msgid "_Exit" msgstr "B_eenden" #: ../gui.py:1176 ../packages.py:444 msgid "_Retry" msgstr "Wiede_rholen" #: ../gui.py:1179 ../packages.py:1556 msgid "The installer will now exit..." msgstr "Das Installationsprogramm wird nun beendet..." #: ../gui.py:1182 ../packages.py:1559 msgid "Your system will now be rebooted..." msgstr "Ihr System wird nun neu gestartet..." #: ../gui.py:1185 ../packages.py:1561 msgid "Rebooting System" msgstr "Systemneustart" #: ../gui.py:1266 #, python-format msgid "%s Installer" msgstr "%s Installation" #: ../gui.py:1274 msgid "Unable to load title bar" msgstr "Titelleiste kann nicht geladen werden" #: ../gui.py:1335 msgid "Install Window" msgstr "Installationsfenster" #: ../harddrive.py:166 ../image.py:533 #, python-format msgid "" "The following ISO images are missing which are required for the install:\n" "\n" "%s\n" "The system will now reboot." msgstr "" "Die folgenden für die Installation benötigten ISO-Images fehlen:\n" "\n" "%s\n" "Das System wird jetzt neustarten." #: ../hdrlist.py:45 ../hdrlist.py:948 msgid "" "This group includes all the packages available. Note that there are " "substantially more packages than just the ones in all the other package " "groups on this page." msgstr "" "Diese Gruppe enthält alle verfügbaren Pakete. Beachten Sie, dass es " "wesentlich mehr Pakete sind als die Pakete in allen anderen Paketgruppen " "dieser Seite." #: ../hdrlist.py:788 msgid "Everything" msgstr "Alles" #: ../hdrlist.py:952 msgid "" "Choose this group to get the minimal possible set of packages. Useful for " "creating small router/firewall boxes, for example." msgstr "" "Wählen Sie diese Gruppe, um das kleinstmögliche Paketset zu erhalten. Dies " "ist zum Beispiel für die Installation von kleinen Router-/Firewall-Rechnern " "nützlich." #: ../hdrlist.py:1001 msgid "Miscellaneous" msgstr "Verschiedenes" #: ../image.py:87 msgid "Required Install Media" msgstr "Erforderliche Installationsmedien" #: ../image.py:88 #, python-format msgid "" "The software you have selected to install will require the following CDs:\n" "\n" "%s\n" "Please have these ready before proceeding with the installation. If you " "need to abort the installation and reboot please select \"Reboot\"." msgstr "" "Sie benötigen folgende CDs zum Installieren der ausgewählten Software:\n" "\n" "%s\n" "Halten Sie diese bitte bereit, bevor Sie mit der Installation fortfahren. " "Falls Sie die Installation abbrechen und den PC neu starten wollen, wählen " "Sie bitte \"Neu starten\"." #: ../image.py:96 ../packages.py:1557 ../packages.py:1560 #: ../iw/confirm_gui.py:67 ../iw/confirm_gui.py:101 #: ../textw/confirm_text.py:38 ../textw/confirm_text.py:66 #: ../textw/firewall_text.py:120 msgid "_Back" msgstr "_Zurück" #: ../image.py:96 ../image.py:486 ../kickstart.py:1507 ../kickstart.py:1535 #: ../iw/partition_gui.py:1009 msgid "_Continue" msgstr "_Weiter" #: ../image.py:155 #, python-format msgid "" "An error occurred unmounting the CD. Please make sure you're not accessing %" "s from the shell on tty2 and then click OK to retry." msgstr "" "Beim Aushängen der CD ist ein Fehler aufgetreten. Stellen Sie sicher, dass " "Sie nicht von der Shell auf tty2 auf %s zugreifen. Klicken Sie auf OK und " "versuchen Sie es erneut." #: ../image.py:188 msgid "Copying File" msgstr "Datei kopieren" #: ../image.py:189 msgid "Transferring install image to hard drive..." msgstr "Das Installationsimage wird auf die Festplatte übertragen..." #: ../image.py:193 msgid "" "An error occurred transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" "Ein Fehler ist während der Übertragung des Installationsimages auf Ihre " "Festplatte aufgetreten. Wahrscheinlich ist zu wenig Platz vorhanden." #: ../image.py:286 msgid "Change CDROM" msgstr "CD-ROM wechseln" #: ../image.py:287 #, python-format msgid "Please insert %s disc %d to continue." msgstr "Legen Sie zum Fortfahren bitte %s Datenträger %d ein." #: ../image.py:322 msgid "Wrong CDROM" msgstr "Falsche CD-ROM" #: ../image.py:323 #, python-format msgid "That's not the correct %s CDROM." msgstr "Dies ist nicht die korrekte %s CD-ROM." #: ../image.py:329 msgid "Unable to access the CDROM." msgstr "Zugriff auf CD-ROM fehlgeschlagen" #: ../installclass.py:61 msgid "Install on System" msgstr "Im System installieren" #: ../kickstart.py:102 msgid "Scriptlet Failure" msgstr "Skriptfehler" #: ../kickstart.py:103 #, python-format msgid "" "There was an error running the scriptlet. You may examine the output in %" "s. This is a fatal error and your install will be aborted.\n" "\n" "Press the OK button to reboot your system." msgstr "" "Beim Ausführen des Skripts trat ein Fehler auf. Sie können die Ausgabe in %" "suntersuchen. Hierbei handelt es sich um einen schwerwiegenden Fehler, und " "die Installation wird beendet.\n" "\n" "Klicken Sie auf OK, um das System neu zu starten." #: ../kickstart.py:1499 msgid "Missing Package" msgstr "Fehlendes Paket" #: ../kickstart.py:1500 #, python-format msgid "" "You have specified that the package '%s' should be installed. This package " "does not exist. Would you like to continue or abort your installation?" msgstr "" "Sie haben angegeben, dass das Paket '%s' installiert werden soll. Dieses " "Paket ist nicht vorhanden. Wollen Sie mit der Installation fortfahren, oder " "abbrechen?" #: ../kickstart.py:1506 ../kickstart.py:1534 msgid "_Abort" msgstr "_Abbrechen" #: ../kickstart.py:1526 msgid "Missing Group" msgstr "Fehlende Gruppe" #: ../kickstart.py:1527 #, python-format msgid "" "You have specified that the group '%s' should be installed. This group does " "not exist. Would you like to continue or abort your installation?" msgstr "" "Sie haben angegeben, dass die Gruppe '%s' installiert werden soll. Diese " "Gruppe gibt es nicht. Wollen Sie mit der Installation fortfahren, oder " "abbrechen?" #: ../network.py:42 msgid "Hostname must be 64 or less characters in length." msgstr "Der Rechnername darf aus maximal 64 Zeichen bestehen." #: ../network.py:45 msgid "Hostname must start with a valid character in the range 'a-z' or 'A-Z'" msgstr "Der Rechnername muss mit einem Zeichen im Bereich 'a-z' oder 'A-Z' beginnen." #: ../network.py:50 msgid "Hostnames can only contain the characters 'a-z', 'A-Z', '-', or '.'" msgstr "Rechnernamen können nur die Zeichen 'a-z', 'A-Z', '-' oder '.' enthalten." #: ../packages.py:46 ../iw/package_gui.py:41 msgid "Proceed with upgrade?" msgstr "Soll mit der Aktualisierung fortgefahren werden?" #: ../packages.py:47 ../iw/package_gui.py:42 msgid "" "The file systems of the Linux installation you have chosen to upgrade have " "already been mounted. You cannot go back past this point. \n" "\n" msgstr "" "Die Dateisysteme der Linux-Installation, die Sie aktualisieren möchten, " "wurden bereits eingebunden. Sie können nach diesem Punkt nicht wieder " "zurückgehen. \n" "\n" #: ../packages.py:51 ../iw/package_gui.py:46 msgid "Would you like to continue with the upgrade?" msgstr "Möchten Sie mit dem Aktualisieren fortfahren?" #: ../packages.py:156 msgid "Reading" msgstr "Lesen" #: ../packages.py:156 msgid "Reading package information..." msgstr "Paketinformationen werden gelesen..." #: ../packages.py:163 msgid "" "Unable to read header list. This may be due to a missing file or bad " "media. Press to try again." msgstr "" "Die Header-Liste kann nicht gelesen werden. Dies kann durch eine fehlende " "Datei, ein defektes Paket oder ein defektes Medium bedingt sein. Drücken Sie " ", um es erneut zu versuchen." #: ../packages.py:176 msgid "" "Unable to read comps file. This may be due to a missing file or bad media. " "Press to try again." msgstr "" "Die comps-Datei kann nicht gelesen werden. Dies kann durch eine fehlende " "Datei oder ein defektes Medium bedingt sein. Drücken Sie , um es " "erneut zu versuchen." #: ../packages.py:185 msgid "" "The comps file in your installation tree is missing critical groups. Please " "ensure that your install tree has been correctly generated." msgstr "" "Der comps Datei in Ihrem Installationsbaum fehler wichtige Gruppen. Bitte " "stellen Sie sicher, dass Ihr Installationsbaum korrekt erzeugt wurde." #: ../packages.py:197 ../packages.py:631 #, python-format msgid "" "You are trying to install on a machine which isn't supported by this release " "of %s." msgstr "" "Sie versuchen auf einer Maschine zu installieren, welche von dieser Version " "von %s nicht unterstützt wird." #: ../packages.py:311 msgid "Dependency Check" msgstr "Abhängigkeitsüberprüfung" #: ../packages.py:312 msgid "Checking dependencies in packages selected for installation..." msgstr "" "Überprüfen der Abhängigkeiten zwischen den Paketen, die für die Installation " "ausgewählt wurden..." #: ../packages.py:373 ../packages.py:864 msgid "Processing" msgstr "Daten werden verarbeitet" #: ../packages.py:374 msgid "Preparing to install..." msgstr "Installation wird vorbereitet..." #: ../packages.py:433 #, python-format msgid "" "The package %s-%s-%s cannot be opened. This is due to a missing file or " "perhaps a corrupt package. If you are installing from CD media this usually " "means the CD media is corrupt, or the CD drive is unable to read the media.\n" "\n" "Press to try again." msgstr "" "Das Paket %s-%s-%s kann nicht geöffnet werden. Dies ist durch eine fehlende " "Datei oder eventuell durch ein fehlerhaftes Paket bedingt. Wenn Sie von " "einer CD-ROM installieren, heißt das in der Regel, dass die CD fehlerhaft " "ist oder dass das CD-Laufwerk nicht von der CD-ROM lesen kann.\n" "\n" "Drücken Sie , um es erneut zu versuchen." #: ../packages.py:443 msgid "Re_boot" msgstr "Neu sta_rten" #: ../packages.py:447 msgid "" "If you reboot, your system will be left in an inconsistent state that will " "likely require reinstallation. Are you sure you wish to continue?" msgstr "" "Wenn Sie jetzt neu starten, wird Ihr System in einem inkonsisten Zustand " "sein,der wahrscheinlich eine Neuinstallation erfordert. Sind Sie sicher, " "dass Sie neu starten wollen?" #: ../packages.py:461 msgid "Installing..." msgstr "Installiere..." #: ../packages.py:482 msgid "Error Installing Package" msgstr "Fehler beim Installieren des Paketes" #: ../packages.py:483 #, python-format msgid "" "There was an error installing %s. This can indicate media failure, lack of " "disk space, and/or hardware problems. This is a fatal error and your " "install will be aborted. Please verify your media and try your install " "again.\n" "\n" "Press the OK button to reboot your system." msgstr "" "Beim Installieren von %s ist ein Fehler aufgetreten. Das könnte ein Fehler " "des Mediums, mangelnder Platz auf der Festplatte und/oder ein Problem mit " "der Hardware sein. Hierbei handelt es sich um einen schwerwiegenden Fehler, " "und die Installation wird beendet. Überprüfen Sie Ihr Installations-Medium, " "und führen Sie die Installation erneut aus.\n" "\n" "Klicken Sie auf OK, um das System neu zu starten." #: ../packages.py:730 ../upgrade.py:360 msgid "" "Unable to merge header list. This may be due to a missing file or bad " "media. Press to try again." msgstr "" "Die Header-Liste kann nicht zusammengefügt werden. Dies kann durch eine " "fehlende Datei oder ein defektes Medium bedingt sein. Drücken Sie , " "um es erneut zu versuchen." #: ../packages.py:865 msgid "Preparing RPM transaction..." msgstr "RPM-Transaktion wird vorbereitet..." #: ../packages.py:955 #, python-format msgid "" "Upgrading %s packages\n" "\n" msgstr "" "%s Pakete werden aktualisiert.\n" "\n" #: ../packages.py:957 #, python-format msgid "" "Installing %s packages\n" "\n" msgstr "" "%s Pakete werden installiert\n" "\n" #: ../packages.py:965 ../packages.py:1265 #, python-format msgid "Upgrading %s-%s-%s.%s.\n" msgstr "%s-%s-%s.%s wird aktualisiert.\n" #: ../packages.py:967 ../packages.py:1267 #, python-format msgid "Installing %s-%s-%s.%s.\n" msgstr "%s-%s-%s.%s wird installiert.\n" #: ../packages.py:983 #, python-format msgid "" "\n" "\n" "The following packages were automatically\n" "selected to be installed:\n" "%s\n" "\n" msgstr "" "\n" "\n" "Die folgenden Pakete wurden für die Installation\n" "automatisch ausgewählt:\n" "%s\n" "\n" #: ../packages.py:989 msgid "Install Starting" msgstr "Installation startet" #: ../packages.py:990 msgid "Starting install process. This may take several minutes..." msgstr "Installationsprozess wird gestartet. Dies kann einige Minuten dauern." #: ../packages.py:1030 msgid "" "You don't appear to have enough disk space to install the packages you've " "selected. You need more space on the following file systems:\n" "\n" msgstr "" "Es steht wahrscheinlich nicht genügend freier Festplattenplatz für die " "ausgewählten Pakete zur Verfügung. Sie benötigen auf folgenden Dateisystemen " "mehr Platz: \n" "\n" #: ../packages.py:1034 ../packages.py:1055 ../iw/lvm_dialog_gui.py:1075 #: ../iw/partition_gui.py:361 ../iw/upgrade_swap_gui.py:148 #: ../textw/partition_text.py:1436 ../textw/upgrade_text.py:111 msgid "Mount Point" msgstr "Einhängepunkt" #: ../packages.py:1035 msgid "Space Needed" msgstr "Benötigter Platz" #: ../packages.py:1051 msgid "" "You don't appear to have enough file nodes to install the packages you've " "selected. You need more file nodes on the following file systems:\n" "\n" msgstr "" "Es stehen wahrscheinlich nicht genügend Datei-Knoten ('inodes') zur " "Verfügung, um die ausgewählten Pakete zu installieren. Auf folgenden " "Dateisystemen benötigen Sie mehr Datei-Knoten: \n" #: ../packages.py:1056 msgid "Nodes Needed" msgstr "Benötigte Knoten" #: ../packages.py:1067 msgid "Disk Space" msgstr "Festplattenplatz" #: ../packages.py:1112 msgid "Post Install" msgstr "Nachträgliche Installation" #: ../packages.py:1113 msgid "Performing post install configuration..." msgstr "Konfiguration nach erfolgter Installation wird durchgeführt..." #: ../packages.py:1291 msgid "" "\n" "\n" "The following packages were available in this version but NOT upgraded:\n" msgstr "" "\n" "\n" "Folgende Pakete sind in dieser Version verfügbar, wurden aber NICHT " "aktualisiert:\n" #: ../packages.py:1294 msgid "" "\n" "\n" "The following packages were available in this version but NOT installed:\n" msgstr "" "\n" "\n" "Folgende Pakete sind in dieser Version verfügbar, wurden aber NICHT " "installiert:\n" #: ../packages.py:1538 msgid "Warning! This is pre-release software!" msgstr "Achtung! Dies ist Beta-Software!" #: ../packages.py:1539 #, python-format msgid "" "Thank you for downloading this pre-release of %s.\n" "\n" "This is not a final release and is not intended for use on production " "systems. The purpose of this release is to collect feedback from testers, " "and it is not suitable for day to day usage.\n" "\n" "To report feedback, please visit:\n" "\n" " %s\n" "\n" "and file a report against '%s'.\n" msgstr "" "Danke für das Herunterladen dieser Beta-Version von %s.\n" "\n" "Dies ist keine endgültige Version und ist nicht für die Verwendung in " "Produktionssystemen gedacht. Zweck dieser Version ist es, eine Rückmeldung " "von denjenigen zu erhalten, die sie testen. Sie eignet sich daher nicht für " "den Alltagsgebrauch.\n" "\n" "Rückmeldungen sind willkommen unter:\n" "\n" " %s\n" "\n" "Hier können Sie Meldungen in Bezug auf '%s' einreichen.\n" #: ../packages.py:1552 msgid "_Install anyway" msgstr "Trotzdem _installieren" #: ../partIntfHelpers.py:35 msgid "Please enter a volume group name." msgstr "Geben Sie einen Namen für den Datenträgerverbund (Volume Group) ein." #: ../partIntfHelpers.py:39 msgid "Volume Group Names must be less than 128 characters" msgstr "Die Volume Group-Namen dürfen aus maximal 128 Zeichen bestehen." #: ../partIntfHelpers.py:42 #, python-format msgid "Error - the volume group name %s is not valid." msgstr "Fehler - der Volume Group-Name %s ist ungültig." #: ../partIntfHelpers.py:47 msgid "" "Error - the volume group name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "Fehler - der Volume Group-Name enthält ungültige Zeichen oder Leerstellen. " "Zugelassen sind Buchstaben, Ziffern, '.' oder '_'." #: ../partIntfHelpers.py:57 msgid "Please enter a logical volume name." msgstr "Geben Sie einen Namen für den logischen Datenträger (Logical Volume) ein." #: ../partIntfHelpers.py:61 msgid "Logical Volume Names must be less than 128 characters" msgstr "Die Logical Volume-Namen dürfen maximal 128 Zeichen enthalten." #: ../partIntfHelpers.py:65 #, python-format msgid "Error - the logical volume name %s is not valid." msgstr "Fehler - der Logical Volume-Name %s ist ungültig." #: ../partIntfHelpers.py:71 msgid "" "Error - the logical volume name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "Fehler - der Logical Volume-Name enthält ungültige Zeichen oder Leerstellen. " "Zugelassen sind Buchstaben, Ziffern, '.' oder '_'." #: ../partIntfHelpers.py:95 msgid "" "The mount point is invalid. Mount points must start with '/' and cannot end " "with '/', and must contain printable characters and no spaces." msgstr "" "Der Einhängepunkt ist unzulässig. Einhängepunkte müssen mit '/' beginnen, " "dürfen nicht mit '/' enden und dürfen nur druckbare Zeichen und keine " "Leerstellen enthalten." #: ../partIntfHelpers.py:102 msgid "Please specify a mount point for this partition." msgstr "Legen Sie einen Einhängepunkt für diese Partition fest." #: ../partIntfHelpers.py:110 msgid "This partition is holding the data for the hard drive install." msgstr "" "Auf dieser Partition sind die Daten für die Installation von der Festplatte " "enthalten." #: ../partIntfHelpers.py:116 #, python-format msgid "This partition is part of the RAID device /dev/md%s." msgstr "Diese Partition ist Teil des RAID-Geräts /dev/md%s." #: ../partIntfHelpers.py:119 msgid "This partition is part of a RAID device." msgstr "Diese Partition ist Teil eines RAID-Geräts." #: ../partIntfHelpers.py:124 #, python-format msgid "This partition is part of the LVM volume group '%s'." msgstr "Diese Partition ist Teil des LVM Datenträgerverbundes (Volume Group) '%s'." #: ../partIntfHelpers.py:127 msgid "This partition is part of a LVM volume group." msgstr "Diese Partition ist Teil eines LVM Datenträgerverbundes (Volume Group)." #: ../partIntfHelpers.py:142 ../partIntfHelpers.py:150 #: ../partIntfHelpers.py:157 ../partIntfHelpers.py:167 #: ../partIntfHelpers.py:184 msgid "Unable To Delete" msgstr "Kann nicht gelöscht werden" #: ../partIntfHelpers.py:143 msgid "You must first select a partition to delete." msgstr "Wählen Sie zuerst die zu löschende Partition aus." #: ../partIntfHelpers.py:151 msgid "You cannot delete free space." msgstr "Sie können keinen freien Speicherplatz löschen." #: ../partIntfHelpers.py:158 msgid "You cannot delete a partition of a LDL formatted DASD." msgstr "Sie können keine Partition einer LDL formatierten DASD löschen." #: ../partIntfHelpers.py:168 #, python-format msgid "" "You cannot delete this partition, as it is an extended partition which " "contains %s" msgstr "" "Sie können diese Partition nicht löschen, da es eine erweiterte Partition " "ist, die %s enthält." #: ../partIntfHelpers.py:185 msgid "" "You cannot delete this partition:\n" "\n" msgstr "" "Sie können diese Partition nicht löschen:\n" "\n" #: ../partIntfHelpers.py:229 ../partIntfHelpers.py:525 #: ../iw/lvm_dialog_gui.py:743 msgid "Confirm Delete" msgstr "Löschen bestätigen" #: ../partIntfHelpers.py:230 #, python-format msgid "You are about to delete all partitions on the device '/dev/%s'." msgstr "Sie sind dabei, alle Partitionen auf dem Gerät /dev/%s zu löschen." #: ../partIntfHelpers.py:233 ../partIntfHelpers.py:526 #: ../iw/lvm_dialog_gui.py:746 ../iw/lvm_dialog_gui.py:1098 #: ../iw/osbootwidget.py:104 ../iw/partition_gui.py:1356 msgid "_Delete" msgstr "_Löschen" #: ../partIntfHelpers.py:291 msgid "Notice" msgstr "Hinweis" #: ../partIntfHelpers.py:292 #, python-format msgid "" "The following partitions were not deleted because they are in use:\n" "\n" "%s" msgstr "" "Die folgenden Partitionen wurden nicht gelöscht, da sie zur Zeit verwendet " "werden:\n" "\n" "%s" #: ../partIntfHelpers.py:308 ../partIntfHelpers.py:321 #: ../partIntfHelpers.py:347 ../partIntfHelpers.py:358 msgid "Unable To Edit" msgstr "Kann nicht bearbeitet werden" #: ../partIntfHelpers.py:309 msgid "You must select a partition to edit" msgstr "Wählen Sie die zu bearbeitende Partition aus." #: ../partIntfHelpers.py:321 ../partIntfHelpers.py:359 msgid "" "You cannot edit this partition:\n" "\n" msgstr "" "Sie können diese Partition nicht bearbeiten:\n" "\n" #: ../partIntfHelpers.py:348 #, python-format msgid "" "You cannot edit this partition, as it is an extended partition which " "contains %s" msgstr "" "Sie können diese Partition nicht bearbeiten, da es eine erweiterte Partition " "ist, die %s enthält" #: ../partIntfHelpers.py:380 msgid "Format as Swap?" msgstr "Als Swap formatieren?" #: ../partIntfHelpers.py:381 #, python-format msgid "" "/dev/%s has a partition type of 0x82 (Linux swap) but does not appear to be " "formatted as a Linux swap partition.\n" "\n" "Would you like to format this partition as a swap partition?" msgstr "" "/dev/%s hat den Partitionstyp 0x82 (Linux Swap), wurde aber offensichtlich " "nicht als Swap-Partition formatiert.\n" "\n" "Möchten Sie diese Partition als Swap-Partition formatieren?" #: ../partIntfHelpers.py:401 #, python-format msgid "You need to select at least one hard drive to have %s installed onto." msgstr "Sie müssen mindestens eine Festplatte auswählen, auf der %s installiert wird." #: ../partIntfHelpers.py:407 msgid "" "You have chosen to use a pre-existing partition for this installation " "without formatting it. We recommend that you format this partition to make " "sure files from a previous operating system installation do not cause " "problems with this installation of Linux. However, if this partition " "contains files that you need to keep, such as home directories, then " "continue without formatting this partition." msgstr "" "Für diese Installation haben Sie eine bereits existierende Partition " "gewählt, ohne sie jedoch zu formatieren. Wir empfehlen, dass Sie diese " "Partition formatieren, um sicherzustellen, dass Dateien eines vorherigen " "Betriebssystems keine Probleme bei der Installation von Linux bereiten. " "Sollte diese Partition Dateien enthalten, die Sie behalten möchten (z.B. " "Home-Verzeichnisse), dann fahren Sie fort, ohne diese Partition zu " "formatieren." #: ../partIntfHelpers.py:415 msgid "Format?" msgstr "Formatieren?" #: ../partIntfHelpers.py:415 ../iw/partition_gui.py:1007 msgid "_Modify Partition" msgstr "Partition ä_ndern" #: ../partIntfHelpers.py:415 msgid "Do _Not Format" msgstr "_Nicht formatieren" #: ../partIntfHelpers.py:423 msgid "Error with Partitioning" msgstr "Fehler bei der Partitionierung" #: ../partIntfHelpers.py:424 #, python-format msgid "" "The following critical errors exist with your requested partitioning scheme. " "These errors must be corrected prior to continuing with your install of %s.\n" "\n" "%s" msgstr "" "In dem benötigten Partitionierungsschema gibt es folgende kritische Fehler. " "Diese Fehler müssen korrigiert werden, bevor Sie mit der Installation von %s " "fortfahren\n" "\n" "%s" #: ../partIntfHelpers.py:438 msgid "Partitioning Warning" msgstr "Partitionierwarnung" #: ../partIntfHelpers.py:439 #, python-format msgid "" "The following warnings exist with your requested partition scheme.\n" "\n" "%s\n" "\n" "Would you like to continue with your requested partitioning scheme?" msgstr "" "Die folgenden Warnungen wurden für das geforderte Partitionsschema\n" "ausgegeben.\n" "%s\n" "\n" "Möchten Sie mit dem geforderten Partitionsschema fortfahren?" #: ../partIntfHelpers.py:453 ../iw/partition_gui.py:663 msgid "" "The following pre-existing partitions have been selected to be formatted, " "destroying all data." msgstr "" "Die folgenden, bereits existierenden Partitionen wurden für die Formatierung " "ausgewählt. Hierbei gehen alle Daten verloren." #: ../partIntfHelpers.py:456 msgid "" "Select 'Yes' to continue and format these partitions, or 'No' to go back and " "change these settings." msgstr "" "Wählen Sie 'Ja', um fortzufahren und diese Partitionen zu formatieren, oder " "'Nein', um zurückzugehen und diese Einstellungen zu ändern." #: ../partIntfHelpers.py:462 msgid "Format Warning" msgstr "Formatierwarnung" #: ../partIntfHelpers.py:510 #, python-format msgid "" "You are about to delete the volume group \"%s\".\n" "\n" "ALL logical volumes in this volume group will be lost!" msgstr "" "Sie sind dabei, den Datenträgerverbund (Volume Group) \"%s\" zu löschen.\n" "\n" "ALLE Log. Datenträger (Logical Volumes) dieses Datenträgerverbundes gehen " "dadurch verloren!" #: ../partIntfHelpers.py:514 #, python-format msgid "You are about to delete the logical volume \"%s\"." msgstr "Sie sind dabei, den logischen Datenträger (Logical Volume) \"%s\" zu löschen." #: ../partIntfHelpers.py:517 msgid "You are about to delete a RAID device." msgstr "Sind sind dabei, ein RAID-Gerät zu löschen." #: ../partIntfHelpers.py:520 #, python-format msgid "You are about to delete the /dev/%s partition." msgstr "Sie sind dabei, die /dev/%s Partition zu löschen." #: ../partIntfHelpers.py:523 msgid "The partition you selected will be deleted." msgstr "Die gewählte Partition wird gelöscht." #: ../partIntfHelpers.py:533 msgid "Confirm Reset" msgstr "Zurücksetzen bestätigen" #: ../partIntfHelpers.py:534 msgid "Are you sure you want to reset the partition table to its original state?" msgstr "" "Sind Sie sicher, dass Sie die Partitionstabelle in den Originalzustand " "zurücksetzen möchten?" #: ../partRequests.py:247 #, python-format msgid "This mount point is invalid. The %s directory must be on the / file system." msgstr "" "Dieser Einhängepunkt ist ungültig. Das Verzeichnis %s muss sich im / " "Dateisystem befinden." #: ../partRequests.py:250 #, python-format msgid "" "The mount point %s cannot be used. It must be a symbolic link for proper " "system operation. Please select a different mount point." msgstr "" "Der Einhängepunkt \"%s\" kann nicht verwendet werden. Für das richtige " "Arbeiten des Systems ist ein symbolischer Link erforderlich. Bitte wählen " "Sie einen anderen Einhängepunkt." #: ../partRequests.py:257 msgid "This mount point must be on a linux file system." msgstr "Der Einhängepunkt muss sich auf einem Linux-Dateisystem befinden." #: ../partRequests.py:278 #, python-format msgid "" "The mount point \"%s\" is already in use, please choose a different mount " "point." msgstr "" "Der Einhängepunkt \"%s\" wird bereits verwendet. Wählen Sie einen anderen " "Einhängepunkt." #: ../partRequests.py:292 #, python-format msgid "" "The size of the %s partition (%10.2f MB) exceeds the maximum size of %10.2f " "MB." msgstr "" "Die Größe der %s Partition (%10.2f MB) übersteigt die maximale Größe von %" "10.2f MB." #: ../partRequests.py:488 #, python-format msgid "" "The size of the requested partition (size = %s MB) exceeds the maximum size " "of %s MB." msgstr "" "Die Größe der geforderten Partition (Größe = %s MB) übersteigt die maximale " "Größe von %s MB." #: ../partRequests.py:493 #, python-format msgid "The size of the requested partition is negative! (size = %s MB)" msgstr "Die Größe der geforderten Partition ist negativ! (Größe = %s MB)" #: ../partRequests.py:497 msgid "Partitions can't start below the first cylinder." msgstr "Partitionen können nicht unterhalb des ersten Zylinders beginnen." #: ../partRequests.py:500 msgid "Partitions can't end on a negative cylinder." msgstr "Partitionen können nicht an einem negativen Zylinder enden." #: ../partRequests.py:663 msgid "No members in RAID request, or not RAID level specified." msgstr "Keine Partitionen in ihrem RAID Request oder kein RAID-Level festgelegt." #: ../partRequests.py:671 ../partitions.py:906 msgid "Bootable partitions can only be on RAID1 devices." msgstr "Bootpartitionen sind nur auf RAID1 zulässig." #: ../partRequests.py:675 #, python-format msgid "A RAID device of type %s requires at least %s members." msgstr "Ein RAID-Gerät vom Typ %s erfordert mindestens %s Partitionen." #: ../partRequests.py:684 #, python-format msgid "" "This RAID device can have a maximum of %s spares. To have more spares you " "will need to add members to the RAID device." msgstr "" "Dieses RAID Gerät kann maximal %s Spare-Geräte haben. Um mehr Spare-Geräte " "zu haben, müssen Sie dem RAID Gerät mehr Partitionen (Members) hinzufügen." #: ../partedUtils.py:194 ../textw/partition_text.py:556 msgid "Foreign" msgstr "Fremd" #: ../partedUtils.py:290 #, python-format msgid "" "The device %s is LDL formatted instead of CDL formatted. LDL formatted " "DASDs are not supported for usage during an install of %s. If you wish to " "use this disk for installation, it must be re-initialized causing the loss " "of ALL DATA on this drive.\n" "\n" "Would you like to reformat this DASD using CDL format?" msgstr "" "Das Gerät %s ist LDL- und nicht CDL-formatiert. LDL-formatierte DASDs sind " "in einer Installation von %s nicht unterstützt. Sollten Sie diese Platte " "für die Installation verwenden wollen, muss diese re-initialisiert werden, " "was den Verlust ALLER DATEN auf dieser Festplatte zur Folge hat.\n" "\n" "Möchten Sie diese DASD im CDL-Format neu formatieren?" #: ../partedUtils.py:320 #, python-format msgid "" "/dev/%s currently has a %s partition layout. To use this disk for the " "installation of %s, it must be re-initialized, causing the loss of ALL DATA " "on this drive.\n" "\n" "Would you like to format this drive?" msgstr "" "Das Gerät /dev/%s hat momentan eine Partitionstabelle vom Typ '%s'. Um auf " "dieser Platte %s zu installieren, muss sie neu eingerichtet werden. Dabei " "gehen ALLE AUF IHR GESPEICHERTEN DATEN verloren.\n" "\n" "Möchten Sie das Laufwert formatieren?" #: ../partedUtils.py:329 msgid "_Ignore drive" msgstr "Laufwerk _übergehen" #: ../partedUtils.py:330 msgid "_Format drive" msgstr "Laufwerk _formatieren" #: ../partedUtils.py:662 #, python-format msgid "Error mounting file system on %s: %s" msgstr "Fehler beim Einbinden des Dateisystems auf %s: %s" #: ../partedUtils.py:750 msgid "Initializing" msgstr "Initialisieren" #: ../partedUtils.py:751 #, python-format msgid "Please wait while formatting drive %s...\n" msgstr "Formatieren der Festplatte %s... Bitte warten.\n" #: ../partedUtils.py:845 #, python-format msgid "" "The partition table on device %s (%s) was unreadable. To create new " "partitions it must be initialized, causing the loss of ALL DATA on this " "drive.\n" "\n" "This operation will override any previous installation choices about which " "drives to ignore.\n" "\n" "Would you like to initialize this drive, erasing ALL DATA?" msgstr "" "Die Partitionstabelle des Geräts %s (%s) war nicht lesbar. Um neue " "Partitionen zu erstellen, muss die Platte eingerichtet werden. Dabei gehen " "ALLE AUF IHR GESPEICHERTEN DATEN verloren.\n" "\n" "Dieser Vorgang macht alle bisherigen Installationsentscheidungen bezüglich " "zu übergehender Laufwerke nichtig.\n" "\n" "Möchten Sie dieses Laufwerk einrichten und ALLE DATEN löschen?" #: ../partedUtils.py:902 #, python-format msgid "" "The partition table on device %s was unreadable. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive.\n" "\n" "This operation will override any previous installation choices about which " "drives to ignore.\n" "\n" "Would you like to initialize this drive, erasing ALL DATA?" msgstr "" "Die Partitionstabelle auf Gerät %s ist nicht lesbar. Um neue Partitionen zu " "erstellen, muss die Tabelle initialisiert werden, was den Verlust ALLER " "DATEN auf dieser Festplatte bewirkt.\n" "\n" "Diese Operation überschreibt alle in der vorangegangenen Installation " "gewählten Optionen der zu ignorierenden Laufwerke.\n" "\n" "Möchten Sie diese Festplatte initialisieren und ALLE DATEN löschen?" #: ../partedUtils.py:1020 ../textw/fdasd_text.py:100 msgid "No Drives Found" msgstr "Keine Festplatten gefunden" #: ../partedUtils.py:1021 msgid "" "An error has occurred - no valid devices were found on which to create new " "file systems. Please check your hardware for the cause of this problem." msgstr "" "Ein Fehler ist aufgetreten - es wurden keine gültigen Geräte gefunden, um " "darauf neue Dateisysteme zu erstellen. Überprüfen Sie Ihre Hardware-" "Konfiguration auf mögliche Fehler." #: ../partitioning.py:77 msgid "Installation cannot continue." msgstr "Installation kann nicht fortfahren." #: ../partitioning.py:78 msgid "" "The partitioning options you have chosen have already been activated. You " "can no longer return to the disk editing screen. Would you like to continue " "with the installation process?" msgstr "" "Die Partitionierungsoptionen, die Sie gewählt haben, wurden bereits " "aktiviert. Sie können nicht mehr zur Festplattenkonfiguration zurückkehren. " "Möchten Sie mit dem Installationsprozess fortfahren?" #: ../partitioning.py:109 msgid "Low Memory" msgstr "Wenig Speicher" #: ../partitioning.py:110 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that OK?" msgstr "" "Da Ihr Computer über wenig Hauptspeicher verfügt, muss der Swap-Bereich " "sofort aktivieren werden. Hierzu muss jetzt die neue Partitionstabelle auf " "die Festplatte geschrieben werden. Sind Sie damit einverstanden?" #: ../partitions.py:804 #, python-format msgid "" "You have not defined a root partition (/), which is required for " "installation of %s to continue." msgstr "" "Sie haben keine Root-Partition definiert (/), die notwendig ist, um mit der " "Installation von %s fortzufahren." #: ../partitions.py:809 #, python-format msgid "" "Your root partition is less than 250 megabytes which is usually too small to " "install %s." msgstr "" "Ihre Root-Partition ist kleiner als 250 Megabyte, was für die Installation " "von %s gewöhnlich zu wenig ist." #: ../partitions.py:816 msgid "You must create a /boot/efi partition of type FAT and a size of 50 megabytes." msgstr "" "Sie müssen eine /boot/efi Partition des Typs FAT und einer Größe von 50 " "Megabyte erstellen." #: ../partitions.py:836 msgid "You must create an Apple Bootstrap partition." msgstr "Sie müssen eine Apple Bootstrap-Partition erzeugen." #: ../partitions.py:858 msgid "You must create a PPC PReP Boot partition." msgstr "Sie müssen eine PPC PReP Boot-Partition erzeugen." #: ../partitions.py:866 ../partitions.py:877 #, python-format msgid "" "Your %s partition is less than %s megabytes which is lower than recommended " "for a normal %s install." msgstr "" "Ihre Partition %s ist kleiner als %s Megabyte, was für die Installation von %" "s gewöhnlich zu wenig ist. " #: ../partitions.py:913 msgid "Bootable partitions cannot be on a logical volume." msgstr "" "Bootbare Partitionen können sich nicht in einem logischen Datenträger " "(Logical Volume) befinden." #: ../partitions.py:924 msgid "" "You have not specified a swap partition. Although not strictly required in " "all cases, it will significantly improve performance for most installations." msgstr "" "Sie haben keine Swap-Partition angegeben. Obwohl diese nicht in jedem Fall " "unbedingt erforderlich ist, verbessert sie doch die Leistung bei den meisten " "Installationen." #: ../partitions.py:931 #, python-format msgid "" "You have specified more than 32 swap devices. The kernel for %s only " "supports 32 swap devices." msgstr "" "Sie haben mehr als 32 Swap-Geräte angegeben. Der Kernel von %s unterstützt " "maximal 32 Swap-Geräte." #: ../partitions.py:942 #, python-format msgid "" "You have allocated less swap space (%dM) than available RAM (%dM) on your " "system. This could negatively impact performance." msgstr "" "Sie haben weniger Swap-Bereich (%dM) angegeben, als RAM (%dM) in Ihrem " "System zur Verfügung steht. Dies könnte sich negativ auf die Leistung " "auswirken." #: ../partitions.py:1240 msgid "the partition in use by the installer." msgstr "Die Partition wird vom Installationsprogramm benutzt." #: ../partitions.py:1243 msgid "a partition which is a member of a RAID array." msgstr "eine Partition, die ein Teil des RAID Bereichs ist." #: ../partitions.py:1246 msgid "a partition which is a member of a LVM Volume Group." msgstr "" "eine Partition, die ein Teil eines LVM Datenträgerverbunds (Volume Group) " "ist." #: ../rescue.py:124 msgid "Starting Interface" msgstr "Starte Schnittstelle" #: ../rescue.py:125 #, python-format msgid "Attempting to start %s" msgstr "Versuch, %s zu starten" #: ../rescue.py:178 msgid "Setup Networking" msgstr "Netzwerk einrichten" #: ../rescue.py:179 msgid "Do you want to start the network interfaces on this system?" msgstr "Wollen Sie die Netzwerk-Schnittstellen auf diesem System starten?" #: ../rescue.py:224 ../text.py:489 msgid "Cancelled" msgstr "Abgebrochen" #: ../rescue.py:225 ../text.py:490 msgid "I can't go to the previous step from here. You will have to try again." msgstr "" "Sie können an dieser Stelle nicht zum vorherigen Schritt zurückkehren. " "Wiederholen Sie den Vorgang." #: ../rescue.py:243 ../rescue.py:278 ../rescue.py:438 msgid "When finished please exit from the shell and your system will reboot." msgstr "" "Nach Beendigung verlassen Sie bitte die Shell ('exit'). Ihr System wird dann " "neu starten." #: ../rescue.py:262 ../rescue.py:331 ../rescue.py:339 ../rescue.py:413 msgid "Rescue" msgstr "Rettung" #: ../rescue.py:263 #, python-format msgid "" "The rescue environment will now attempt to find your Linux installation and " "mount it under the directory %s. You can then make any changes required to " "your system. If you want to proceed with this step choose 'Continue'. You " "can also choose to mount your file systems read-only instead of read-write " "by choosing 'Read-Only'.\n" "\n" "If for some reason this process fails you can choose 'Skip' and this step " "will be skipped and you will go directly to a command shell.\n" "\n" msgstr "" "Die Rescue-Umgebung wird nun versuchen, Ihre Linux-Installation zu finden " "und sie im Verzeichnis %s zu mounten. Anschließend können Sie alle für Ihr " "System notwendigen Änderungen vornehmen. Wenn Sie fortfahren möchten, wählen " "Sie 'Weiter'. Sie können Ihre Dateisysteme auch im Nur-Lese-Modus statt im " "Lese- und Schreibmodus mounten. Wählen Sie in\n" "diesem Fall 'Nur-Lesen'.\n" "\n" "Wenn dieser Prozess fehlschlägt, können Sie 'Überspringen' wählen. Auf diese " "Weise wird dieser Schritt übersprungen und es wird direkt eine Befehls-Shell " "angezeigt.\n" "\n" #: ../rescue.py:273 ../iw/partition_gui.py:565 ../loader2/cdinstall.c:109 #: ../loader2/cdinstall.c:117 ../loader2/driverdisk.c:477 msgid "Continue" msgstr "Weiter" #: ../rescue.py:273 ../rescue.py:282 msgid "Read-Only" msgstr "Nur-Lesen" #: ../rescue.py:273 ../rescue.py:275 ../textw/upgrade_text.py:123 #: ../loader2/cdinstall.c:257 ../loader2/cdinstall.c:259 #: ../loader2/method.c:420 msgid "Skip" msgstr "Überspringen" #: ../rescue.py:305 msgid "System to Rescue" msgstr "Zu rettendes System" #: ../rescue.py:306 msgid "What partition holds the root partition of your installation?" msgstr "Auf welcher Partition befindet sich die Root-Partition der Installation?" #: ../rescue.py:308 ../rescue.py:312 msgid "Exit" msgstr "Beenden" #: ../rescue.py:332 msgid "" "Your system had dirty file systems which you chose not to mount. Press " "return to get a shell from which you can fsck and mount your partitions. " "The system will reboot automatically when you exit from the shell." msgstr "" "Ihr System hatte fehlerhafte Dateisysteme, die Sie nicht gemountet haben. " "Drücken Sie die Enter-Taste, um eine Shell aufzurufen, von der Sie fsck und " "Ihre Partitionen mounten können. Das System bootet automatisch neu, wenn Sie " "die Shell verlassen." #: ../rescue.py:340 #, python-format msgid "" "Your system has been mounted under %s.\n" "\n" "Press to get a shell. If you would like to make your system the " "root environment, run the command:\n" "\n" "\tchroot %s\n" "\n" "The system will reboot automatically when you exit from the shell." msgstr "" "Ihr System wurde gemountet unter: %s.\n" "\n" "Drücken Sie die , um eine Shell zu aufzurufen. Wenn Sie Ihr System " "als Root-Umgebung möchten, führen Sie folgenden Befehl aus:\n" "\n" "\tchroot %s\n" "\n" "Das System wird automatisch neu starten, wenn Sie die Shell verlassen." #: ../rescue.py:414 #, python-format msgid "" "An error occurred trying to mount some or all of your system. Some of it may " "be mounted under %s.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" "Ein Fehler ist bei dem Versuch aufgetreten, einige oder alle Ihre Systeme zu " "mounten. Einige wurden eventuell unter %s gemountet.\n" "\n" "Drücken Sie , um eine Shell aufzurufen. Das System wird automatisch " "neu booten, wenn Sie die Shell verlassen." #: ../rescue.py:420 msgid "Rescue Mode" msgstr "Rescue Modus" #: ../rescue.py:421 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" "Sie haben keine Linux Partitionen. Drücken Sie die Enter-Taste, um eine " "Shell zu erhalten. Das System wird automatisch neu starten, wenn Sie die " "Shell verlassen." #: ../rescue.py:435 #, python-format msgid "Your system is mounted under the %s directory." msgstr "Ihr System wurde unter dem Verzeichnis %s gemountet." #: ../text.py:179 msgid "Help not available" msgstr "Hilfe nicht verfügbar" #: ../text.py:180 msgid "No help is available for this step of the install." msgstr "Für diesen Installationsschritt ist keine Hilfe verfügbar." #: ../text.py:280 msgid "Save Crash Dump" msgstr "Informationen zum Absturz speichern" #: ../text.py:301 ../text.py:309 msgid "Save" msgstr "Speichern" #: ../text.py:301 ../text.py:304 ../text.py:307 msgid "Debug" msgstr "Fehlerdiagnose" #: ../text.py:349 ../loader2/lang.c:52 ../loader2/loader.c:133 #, c-format, python-format msgid "Welcome to %s" msgstr "Willkommen bei %s" #: ../text.py:356 msgid " for help | between elements | selects | next screen" msgstr " Hilfe | Elemente wechseln | Auswahl | Weiter" #: ../text.py:358 msgid "" " / between elements | selects | next " "screen" msgstr " / Elemente wechseln | Auswahl | Weiter " #: ../upgrade.py:75 msgid "Searching" msgstr "Suchen" #: ../upgrade.py:76 #, python-format msgid "Searching for %s installations..." msgstr "%s Installationen werden gesucht..." #: ../upgrade.py:128 ../upgrade.py:136 msgid "Dirty File Systems" msgstr "Fehlerhafte Dateisysteme" #: ../upgrade.py:129 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Please boot your Linux installation, let the file systems be " "checked and shut down cleanly to upgrade.\n" "%s" msgstr "" "Die folgenden Dateisysteme Ihres Linux-Systems wurden nicht ordnungsgemäß " "ausgehängt. Booten Sie die Linux-Installation erneut, lassen Sie die " "Dateisysteme prüfen und fahren Sie das System ordnungsgemäß herunter, um das " "Upgrade vornehmen zu können.\n" "%s" #: ../upgrade.py:137 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Would you like to mount them anyway?\n" "%s" msgstr "" "Die folgenden Dateisysteme Ihres Linux-Systems wurden nicht korrekt " "ausgehängt. Möchten Sie sie trotzdem einhängen?\n" "%s" #: ../upgrade.py:275 ../upgrade.py:281 msgid "Mount failed" msgstr "Fehler beim Einhängen" #: ../upgrade.py:276 msgid "" "One or more of the file systems listed in the /etc/fstab on your Linux " "system cannot be mounted. Please fix this problem and try to upgrade again." msgstr "" "Ein oder mehrere Dateisystem(e), die in der Datei /etc/fstab Ihres Linux-" "Systems enthalten sind, können nicht eingebunden werden. Beheben Sie dieses " "Problem und beginnen Sie dann erneut mit dem Aktualisieren Ihres Systems." #: ../upgrade.py:282 msgid "" "One or more of the file systems listed in the /etc/fstab of your Linux " "system are inconsistent and cannot be mounted. Please fix this problem and " "try to upgrade again." msgstr "" "Ein oder mehrere Dateisystem(e), die in der Datei /etc/fstab Ihres Linux-" "Systems enthalten sind, sind widersprüchlich und können nicht eingebunden " "werden. Beheben Sie dieses Problem und beginnen Sie dann erneut mit dem " "Aktualisieren Ihres Systems." #: ../upgrade.py:299 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" "Die folgenden Dateien sind absolute symbolische Links, die während der " "Aktualisierung nicht unterstützt werden. Ändern Sie diese in relative " "symbolische Links um und starten Sie die Aktualisierung dann erneut.\n" "\n" #: ../upgrade.py:305 msgid "Absolute Symlinks" msgstr "Absolute Symlinks" #: ../upgrade.py:316 msgid "" "The following are directories which should instead be symbolic links, which " "will cause problems with the upgrade. Please return them to their original " "state as symbolic links and restart the upgrade.\n" "\n" msgstr "" "Die folgenden sind Verzeichnisse, welche symbolische Links sein sollten, was " "Probleme beim Upgrade verursacht. Bitte stellen Sie deren Originalzustand," "als symbolische Links, wieder her und starten Sie das Upgrade erneut.\n" "\n" #: ../upgrade.py:322 msgid "Invalid Directories" msgstr "Ungültige Verzeichnisse" #: ../upgrade.py:329 #, python-format msgid "%s not found" msgstr "%s nicht gefunden" #: ../upgrade.py:372 msgid "Finding" msgstr "Suchen" #: ../upgrade.py:373 msgid "Finding packages to upgrade..." msgstr "Zu aktualisierende Pakete werden gesucht..." #: ../upgrade.py:385 msgid "" "The installation program is unable to upgrade systems with a pre-rpm 4.x " "database. Please install the errata rpm packages for your release as " "described in the release notes and then run the upgrade procedure." msgstr "" "Das Installationsprogramm ist nicht dazu in der Lage, Systeme, welche eine " "pre-rpm 4.x Datenbank enthalten, zu aktualisieren. Bitte installieren Sie " "die Errata rpm-Pakete für Ihre Version, wie in den Release Notes " "beschrieben, und führen Sie dann die Aktualisierung durch." #: ../upgrade.py:412 msgid "An error occurred when finding the packages to upgrade." msgstr "" "Ein Fehler ist bei der Suche nach den zu aktualisierenden Paketen " "aufgetreten. " #: ../upgrade.py:440 #, python-format msgid "" "The arch of the release of %s you are upgrading to appears to be %s which " "does not match your previously installed arch of %s. This is likely to not " "succeed. Are you sure you wish to continue the upgrade process?" msgstr "" "Die Architektur der Release von %s, welche Sie aktualisieren, scheint %s zu " "sein. Dies stimmt mit dem vorher von Ihnen installierten Architektur von %s " "nicht überein. Dies wird wahrscheinlich keinen Erfolg haben. Sind Sie " "sicher, dass Sie mit dem Upgrade fortfahren wollen?" #: ../upgrade.py:492 #, python-format msgid "" "This system appears to have third party packages installed that overlap with " "packages included in %s. Because these packages overlap, continuing the " "upgrade process may cause them to stop functioning properly or may cause " "other system instability. Please see the release notes for more " "information.\n" "\n" "Do you wish to continue the upgrade process?" msgstr "" "In diesem System wurden Pakete von Drittfirmen gefunden, die sich mit den " "Paketen von %s überschneiden. Wenn mit dem Upgrade fortgefahren wird, " "könnten diese nicht mehr richtig funktionieren oder das System instabil " "werden. Lesen Sie bitte die Release Notes für weitere Informationen.\n" "\n" "Wollen Sie mit dem Upgrade fortfahren?" #: ../upgrade.py:515 #, python-format msgid "" "This system does not have an /etc/redhat-release file. It is possible that " "this is not a %s system. Continuing with the upgrade process may leave the " "system in an unusable state. Do you wish to continue the upgrade process?" msgstr "" "Auf diesem System ist keine /etc/redhat-release Datei vorhanden. Dies ist " "vielleicht kein %s System. Wenn mit dem Upgrade fortgefahren wird, könnte " "das System unbenutzbar werden. Wollen Sie mit dem Upgrade fortfahren?" #: ../upgrade.py:555 #, python-format msgid "" "You appear to be upgrading from a system which is too old to upgrade to this " "version of %s. Are you sure you wish to continue the upgrade process?" msgstr "" "Allem Anschein nach versuchen Sie, ein System zu aktualisieren, das zu alt " "ist, um auf diese Version von %s aktualisiert zu werden. Sind Sie sicher, " "dass Sie mit dem Upgrade fortfahren wollen?" #: ../upgradeclass.py:19 msgid "Upgrade Existing System" msgstr "Vorhandenes System aktualisieren" #: ../upgradeclass.py:23 msgid "Upgrade" msgstr "Aktualisieren" #: ../urlinstall.py:45 msgid "Connecting..." msgstr "Verbinde..." #: ../vnc.py:54 msgid "Unable to Start X" msgstr "Kann X nicht starten" #: ../vnc.py:55 msgid "" "X was unable to start on your machine. Would you like to start VNC to " "connect to this computer from another computer and perform a graphical " "install or continue with a text mode install?" msgstr "" "X konnte auf Ihrer Maschine nicht gestartet werden. Möchten Sie VNC starten, " "um von einem anderen Rechner zu diesem Rechner zu verbinden und so eine " "grafische Installation durchführen oder mit einer Installation im Textmodus " "fortfahren?" #: ../vnc.py:62 ../vnc.py:65 msgid "Use text mode" msgstr "Textmodus verwenden" #: ../vnc.py:63 msgid "Start VNC" msgstr "Starte VNC" #: ../vnc.py:73 msgid "VNC Configuration" msgstr "VNC Konfiguration" #: ../vnc.py:77 msgid "No password" msgstr "Kein Passwort" #: ../vnc.py:80 msgid "" "A password will prevent unauthorized listeners connecting and monitoring " "your installation progress. Please enter a password to be used for the " "installation" msgstr "" "Ein Kennwort verhindert Lauschangriffe während des Installationsvorgangs. " "Bitte geben Sie ein Kennwort für die Installation ein" #: ../vnc.py:88 ../textw/userauth_text.py:44 ../loader2/urls.c:437 msgid "Password:" msgstr "Passwort:" #: ../vnc.py:89 ../textw/userauth_text.py:45 msgid "Password (confirm):" msgstr "Passwort (bestätigen):" #: ../vnc.py:111 ../textw/userauth_text.py:66 ../textw/userauth_text.py:146 msgid "Password Mismatch" msgstr "Abweichung beim Passwort" #: ../vnc.py:112 ../textw/userauth_text.py:67 ../textw/userauth_text.py:147 msgid "The passwords you entered were different. Please try again." msgstr "" "Sie haben unterschiedliche Passwörter eingegeben. Wiederholen Sie den " "Vorgang." #: ../vnc.py:117 ../textw/userauth_text.py:61 ../textw/userauth_text.py:138 msgid "Password Length" msgstr "Länge des Passworts" #: ../vnc.py:118 msgid "The password must be at least six characters long." msgstr "Das Passwort muss aus mindestens 6 Zeichen bestehen." #: ../xsetup.py:55 ../iw/xconfig_gui.py:35 ../textw/xconfig_text.py:22 msgid "DDC Probed Monitor" msgstr "DDC-erkannter Monitor" #: ../zfcp.py:27 msgid "" "zSeries machines can access industry-standard SCSI devices via Fibre Channel " "(FCP). You need to provide 5 parameters for each device: a 16 bit device " "number, a 16bit SCSI ID, a 64 bit World Wide Port Name (WWPN), a 16bit SCSI " "LUN and a 64 bit FCP LUN." msgstr "" "Rechner der zSeries können via Fibre Channel (FCP) auf Industriestandard-" "SCSI-Geräte zugreifen. Sie müssen 5 Parameter für jedes Gerät zur Verfügung " "stellen: eine 16 Bit Gerätenummer, eine 16 Bit SCSI-ID, eine 64 Bit World " "Wide Port Number (WWPN), eine 16 Bit SCSI LUN und eine 64 Bit FCP LUN." #: ../zfcp.py:29 msgid "Device number" msgstr "Gerätenummer" #: ../zfcp.py:30 msgid "You have not specified a device number or the number is invalid" msgstr "Sie haben keine Gerätenummer oder eine ungültige Gerätenummer angegeben" #: ../zfcp.py:32 msgid "SCSI Id" msgstr "SCSI ID" #: ../zfcp.py:33 msgid "You have not specified a SCSI ID or the ID is invalid." msgstr "Sie haben keine SCSI ID oder eine ungültige ID angegeben." #: ../zfcp.py:35 ../textw/zfcp_text.py:102 msgid "WWPN" msgstr "WWPN" #: ../zfcp.py:36 msgid "You have not specified a worldwide port name or the name is invalid." msgstr "Sie haben keinen WWPN oder einen ungültigen WWPN angegeben." #: ../zfcp.py:38 msgid "SCSI LUN" msgstr "SCSI LUN" #: ../zfcp.py:39 msgid "You have not specified a SCSI LUN or the number is invalid." msgstr "Sie haben keine SCSI LUN oder eine ungültige Nummer angegeben." #: ../zfcp.py:41 ../textw/zfcp_text.py:102 msgid "FCP LUN" msgstr "FCP LUN" #: ../zfcp.py:42 msgid "You have not specified a FCP LUN or the number is invalid." msgstr "Sie haben keine FCP LUN oder eine ungültige Nummer angegeben." #: ../iw/account_gui.py:25 msgid "Set Root Password" msgstr "Setze Root-Passwort" #: ../iw/account_gui.py:41 ../iw/account_gui.py:49 ../iw/account_gui.py:56 #: ../iw/account_gui.py:65 ../textw/userauth_text.py:71 msgid "Error with Password" msgstr "Fehler mit dem Root-Passwort" #: ../iw/account_gui.py:42 msgid "" "You must enter your root password and confirm it by typing it a second time " "to continue." msgstr "" "Um fortzufahren, müssen Sie Ihr Root-Passwort eingeben und dies durch " "erneute Eingabe bestätigen." #: ../iw/account_gui.py:50 msgid "The passwords you entered were different. Please try again." msgstr "" "Sie haben unterschiedliche Passwörter eingegeben. Bitte wiederholen Sie den " "Vorgang." #: ../iw/account_gui.py:57 msgid "The root password must be at least six characters long." msgstr "Das Root-Passwort muss aus mindestens 6 Zeichen bestehen." #: ../iw/account_gui.py:66 ../textw/userauth_text.py:72 msgid "" "Requested password contains non-ascii characters which are not allowed for " "use in password." msgstr "" "Das geforderte Passwort enthält nicht-ASCII Zeichen, welche in Passwörtern " "nicht erlaubt sind." #: ../iw/account_gui.py:93 msgid "" "The root account is used for administering the system. Enter a password for " "the root user." msgstr "" "'root' ist das Konto für die Systemverwaltung. Geben Sie ein Kennwort für " "den Benutzer 'root' ein." #: ../iw/account_gui.py:110 msgid "Root _Password: " msgstr "Root-_Passwort: " #: ../iw/account_gui.py:113 msgid "_Confirm: " msgstr "_Bestätigen: " #: ../iw/auth_gui.py:22 ../textw/userauth_text.py:337 msgid "Authentication Configuration" msgstr "Authentifizierung konfigurieren" #: ../iw/auth_gui.py:98 msgid "Enable _MD5 passwords" msgstr "_MD5-Passwörter aktivieren" #: ../iw/auth_gui.py:99 msgid "Enable shado_w passwords" msgstr "Shado_w-Passwörter aktivieren" #: ../iw/auth_gui.py:102 msgid "Enable N_IS" msgstr "N_IS aktivieren" #: ../iw/auth_gui.py:103 msgid "Use _broadcast to find NIS server" msgstr "_Broadcast für die Suche nach NIS-Server verwenden" #: ../iw/auth_gui.py:115 msgid "NIS _Domain: " msgstr "NIS-_Domäne: " #: ../iw/auth_gui.py:118 msgid "NIS _Server: " msgstr "NIS-_Server: " #: ../iw/auth_gui.py:142 msgid "Enable _LDAP" msgstr "_LDAP aktivieren" #: ../iw/auth_gui.py:145 msgid "Use _TLS lookups" msgstr "_TLS Verschlüsselung verwenden" #: ../iw/auth_gui.py:146 msgid "LDAP _Server:" msgstr "LDAP-_Server:" #: ../iw/auth_gui.py:149 msgid "LDAP _Base DN:" msgstr "LDAP-_Basis-DN:" #: ../iw/auth_gui.py:177 msgid "Enable _Kerberos" msgstr "_Kerberos aktivieren" #: ../iw/auth_gui.py:181 msgid "R_ealm:" msgstr "R_ealm:" #: ../iw/auth_gui.py:184 msgid "K_DC:" msgstr "K_DC:" #: ../iw/auth_gui.py:187 msgid "_Admin Server:" msgstr "_Admin-Server:" #: ../iw/auth_gui.py:216 msgid "Enable SMB _Authentication" msgstr "SMB _Authentifizierung aktivieren" #: ../iw/auth_gui.py:219 msgid "SMB _Server:" msgstr "SMB-_Server:" #: ../iw/auth_gui.py:222 msgid "SMB Work_group:" msgstr "SMB-Arbeitsgruppe:" #: ../iw/auth_gui.py:250 msgid "NIS" msgstr "NIS" #: ../iw/auth_gui.py:251 msgid "LDAP" msgstr "LDAP" #: ../iw/auth_gui.py:252 msgid "Kerberos 5" msgstr "Kerberos 5" #: ../iw/auth_gui.py:253 msgid "SMB" msgstr "SMB" #: ../iw/blpasswidget.py:37 msgid "" "A boot loader password prevents users from changing options passed to the " "kernel. For greater system security, it is recommended that you set a " "password." msgstr "" "Durch das Bootloader-Passwort wird verhindert, dass Benutzer die an den " "Kernel übergebenen Optionen ändern. Für eine höhere Sicherheit empfehlen wir " "die Einrichtung eines Passworts." #: ../iw/blpasswidget.py:42 msgid "_Use a boot loader password" msgstr "Bootloader-Passwort ben_utzen" #: ../iw/blpasswidget.py:73 msgid "Change _password" msgstr "_Passwort ändern" #: ../iw/blpasswidget.py:96 msgid "Enter Boot Loader Password" msgstr "Bootloader-Passwort eingeben" #: ../iw/blpasswidget.py:102 msgid "" "Enter a boot loader password and then confirm it. (Note that your BIOS " "keymap may be different than the actual keymap you are used to.)" msgstr "" "Geben Sie ein Bootloader-Passwort ein und bestätigen Sie es. (Bitte " "beachten Sie, dass Ihre BIOS Tastaturbelegung sich von Ihrer tatsächlichen " "Tastaturbelegung unterscheiden kann.)" #: ../iw/blpasswidget.py:109 msgid "_Password:" msgstr "_Passwort:" #: ../iw/blpasswidget.py:115 msgid "Con_firm:" msgstr "Bes_tätigen:" #: ../iw/blpasswidget.py:136 msgid "Passwords don't match" msgstr "Die Passwörter stimmen nicht überein." #: ../iw/blpasswidget.py:137 ../textw/bootloader_text.py:451 msgid "Passwords do not match" msgstr "Die Passwörter stimmen nicht überein." #: ../iw/blpasswidget.py:146 ../textw/bootloader_text.py:461 msgid "" "Your boot loader password is less than six characters. We recommend a " "longer boot loader password.\n" "\n" "Would you like to continue with this password?" msgstr "" "Ihr Bootloader-Passwort besteht aus weniger als 6 Zeichen. Empfehlenswert " "ist jedoch ein längeres Passwort.\n" "\n" "Möchten Sie mit diesem Passwort fortfahren?" #: ../iw/bootdisk_gui.py:24 msgid "Boot Diskette Creation" msgstr "Erstellen der Bootdiskette" #: ../iw/bootdisk_gui.py:55 #, python-format msgid "" "The boot diskette allows you to boot your %s system from a floppy diskette. " "A boot diskette allows you to boot your system in the event your bootloader " "configuration stops working, if you chose not to install a boot loader, or " "if your third-party boot loader does not support Linux.\n" "\n" "It is highly recommended you create a boot diskette.\n" msgstr "" "Mit der Bootdiskette können Sie Ihr %s System von einer Diskette aus " "starten. Die Bootdiskette kann für das Booten Ihres Systems verwendet " "werden, wenn die Bootloader-Konfiguration nicht mehr funktioniert, wenn Sie " "keinen Bootloader installieren möchten, oder wenn der Bootloader von " "Fremdherstellern Linux nicht unterstützt.\n" "\n" "Es wird dringend empfohlen, eine Bootdiskette anzulegen.\n" #: ../iw/bootdisk_gui.py:71 msgid "_Yes, I would like to create a boot diskette" msgstr "_Ja, ich möchte eine Bootdiskette anlegen." #: ../iw/bootdisk_gui.py:74 msgid "No, I _do not want to create a boot diskette" msgstr "_Nein, ich möchte keine Bootdiskette anlegen." #: ../iw/bootloader_advanced_gui.py:27 msgid "Advanced Boot Loader Configuration" msgstr "Erweiterte Bootloader Konfiguration" #: ../iw/bootloader_advanced_gui.py:43 ../textw/bootloader_text.py:126 msgid "" "Forcing the use of LBA32 for your bootloader when not supported by the BIOS " "can cause your machine to be unable to boot.\n" "\n" "Would you like to continue and force LBA32 mode?" msgstr "" "Der erzwungene Gebrauch von LBA32 für Ihren Bootloader ohne Unterstützung " "des BIOS kann dazu führen, dass Ihr Rechner nicht startet.\n" "\n" "Möchten Sie fortfahren und den LBA32-Modus erzwingen?" #: ../iw/bootloader_advanced_gui.py:49 msgid "Force LBA32" msgstr "Verwendung von LBA32 erzwingen" #: ../iw/bootloader_advanced_gui.py:70 msgid "_Force LBA32 (not normally required)" msgstr "Verwendung von LBA32 er_zwingen (gewöhnlich nicht erforderlich)" #: ../iw/bootloader_advanced_gui.py:74 msgid "" "If you wish to add default options to the boot command, enter them into the " "'General kernel parameters' field." msgstr "" "Wenn Sie dem Bootbefehl Standardoptionen hinzufügen möchten, geben Sie diese " "in das Feld 'Allgemeine Kernelparameter' ein." #: ../iw/bootloader_advanced_gui.py:80 msgid "_General kernel parameters" msgstr "All_gemeine Kernel-Parameter" #: ../iw/bootloader_main_gui.py:30 ../textw/bootloader_text.py:43 #: ../textw/bootloader_text.py:109 ../textw/bootloader_text.py:166 #: ../textw/bootloader_text.py:289 ../textw/bootloader_text.py:403 msgid "Boot Loader Configuration" msgstr "Bootloader Konfiguration" #: ../iw/bootloader_main_gui.py:75 msgid "Change Boot Loader" msgstr "Bootloader ändern" #: ../iw/bootloader_main_gui.py:93 msgid "" "You have elected to not install any boot loader. It is strongly recommended " "that you install a boot loader unless you have an advanced need. A boot " "loader is almost always required in order to reboot your system into Linux " "directly from the hard drive.\n" "\n" "Would you like to continue and not install a boot loader?" msgstr "" "Sie haben sich entschieden, keinen Bootloader zu installieren. Es wird " "dringend empfohlen, einen Bootloader zu installieren, es sei denn, Sie haben " "besondere Anforderungen. Ein Bootloader ist fast immer erforderlich, um Ihr " "System direkt von der Festplatte aus in Linux zu booten.\n" "\n" "Möchten Sie fortfahren und keinen Bootloader installieren?" #: ../iw/bootloader_main_gui.py:97 msgid "C_ontinue with no boot loader" msgstr "Ohne Bootloader f_ortfahren" #: ../iw/bootloader_main_gui.py:120 msgid "" "Please select the boot loader that the computer will use. GRUB is the " "default boot loader. However, if you do not wish to overwrite your current " "boot loader, select \"Do not install a boot loader.\" " msgstr "" "Wählen Sie den Bootloader, den der Computer verwendet. GRUB ist der " "standardmäßige Bootloader. Wenn Sie jedoch Ihren derzeitigen Bootloader " "nicht überschreiben möchten, wählen Sie \"Keinen Bootloader installieren.\" " #: ../iw/bootloader_main_gui.py:128 msgid "Use _GRUB as the boot loader" msgstr "_GRUB als Bootloader verwenden" #: ../iw/bootloader_main_gui.py:130 msgid "_Do not install a boot loader" msgstr "Keinen Bootloa_der installieren" #: ../iw/bootloader_main_gui.py:149 #, python-format msgid "The %s boot loader will be installed on /dev/%s." msgstr "Der %s Bootloader wird auf /dev/%s installiert." #: ../iw/bootloader_main_gui.py:154 msgid "No boot loader will be installed." msgstr "Es wird kein Bootloader installiert." #: ../iw/bootloader_main_gui.py:205 msgid "_Change boot loader" msgstr "Bootloader ä_ndern" #: ../iw/bootloader_main_gui.py:229 msgid "Configure advanced boot loader _options" msgstr "Erweiterte Bootloader-_Optionen konfigurieren" #: ../iw/bootlocwidget.py:39 msgid "Install Boot Loader record on:" msgstr "Bootloader Datensatz installieren auf:" #: ../iw/bootlocwidget.py:70 msgid "_Change Drive Order" msgstr "Festplattenreihenfolge ä_ndern" #: ../iw/bootlocwidget.py:82 msgid "Edit Drive Order" msgstr "Festplattenreihenfolge bearbeiten" #: ../iw/bootlocwidget.py:87 msgid "" "Arrange the drives to be in the same order as used by the BIOS. Changing the " "drive order may be useful if you have multiple SCSI adapters or both SCSI " "and IDE adapters and want to boot from the SCSI device.\n" "\n" "Changing the drive order will change where the installation program locates " "the Master Boot Record (MBR)." msgstr "" "Ordnen Sie Ihre Festplatten in der Reihenfolge an, in der Sie von Ihrem BIOS " "verwendet werden. Dies ist nur dann nützlich, wenn Sie mehrere SCSI Adapter " "oder sowohl SCSI als auch IDE besitzen und vom SCSI Gerät booten möchten.\n" "\n" "Die Änderung der Reihenfolge ändert auch den Ort, an dem das " "Installationsprogramm den Master Boot Record (MBR) abspeichert." #: ../iw/confirm_gui.py:57 msgid "About to Install" msgstr "Installation beginnt" #: ../iw/confirm_gui.py:64 ../iw/confirm_gui.py:98 ../textw/confirm_text.py:35 #: ../textw/confirm_text.py:63 msgid "Reboot?" msgstr "Neu sta_rten?" #: ../iw/confirm_gui.py:65 ../iw/confirm_gui.py:99 ../textw/confirm_text.py:36 #: ../textw/confirm_text.py:64 msgid "The system will be rebooted now." msgstr "Ihr System wird nun neu gestartet." #: ../iw/confirm_gui.py:82 #, python-format msgid "Click next to begin installation of %s." msgstr "Klicken Sie auf Weiter, um mit der Installation von %s zu beginnen." #: ../iw/confirm_gui.py:83 #, python-format msgid "" "A complete log of the installation can be found in the file '%s' after " "rebooting your system.\n" "\n" "A kickstart file containing the installation options selected can be found " "in the file '%s' after rebooting the system." msgstr "" "Ein vollständiges Installationsprotokoll finden Sie nach dem Neustart Ihres " "Systems in der Datei '%s'.\n" "\n" "Eine kickstart-Datei mit den gewählten Installationsoptionen steht nach dem " "Neustart Ihres Systems in der Datei '%s' zur Verfügung." #: ../iw/confirm_gui.py:90 msgid "About to Upgrade" msgstr "Upgrade beginnt" #: ../iw/confirm_gui.py:115 #, python-format msgid "Click next to begin upgrade of %s." msgstr "Klicken Sie auf Weiter, um mit dem Aktualisieren von %s zu beginnen." #: ../iw/confirm_gui.py:116 #, python-format msgid "" "A complete log of the upgrade can be found in the file '%s' after rebooting " "your system." msgstr "" "Ein vollständiges Aktualisierungsprotokoll finden Sie nach dem Neustart " "Ihres Systems in der Datei '%s'." #: ../iw/congrats_gui.py:23 msgid "Congratulations" msgstr "Herzlichen Glückwunsch!" #: ../iw/congrats_gui.py:59 msgid "" "Remove any media used during the installation process and press the \"Reboot" "\" button to reboot your system.\n" "\n" msgstr "" "Entfernen Sie sämtliche Installationsmedien, die Sie bei der Installation " "verwendet haben, und drücken Sie \"Neu starten\", um Ihr System neu zu " "starten.\n" "\n" #: ../iw/congrats_gui.py:64 #, python-format msgid "" "Congratulations, the installation is complete.\n" "\n" "%s%s" msgstr "" "Herzlichen Glückwunsch, die Installation wurde erfolgreich beendet.\n" "\n" "%s%s" #: ../iw/dependencies_gui.py:21 msgid "Unresolved Dependencies" msgstr "Nicht gelöste Abhängigkeiten" #: ../iw/dependencies_gui.py:34 ../iw/package_gui.py:253 #: ../iw/package_gui.py:496 ../iw/package_gui.py:673 #: ../textw/packages_text.py:26 ../textw/packages_text.py:353 #, python-format msgid "Total install size: %s" msgstr "Gesamtgröße der Installation: %s" #: ../iw/dependencies_gui.py:74 ../iw/progress_gui.py:353 #: ../textw/packages_text.py:384 msgid "Package" msgstr "Paket" #: ../iw/dependencies_gui.py:76 ../textw/packages_text.py:384 msgid "Requirement" msgstr "Voraussetzung" #: ../iw/dependencies_gui.py:90 msgid "_Install packages to satisfy dependencies" msgstr "Pakete _installieren, um Abhängigkeiten zu erfüllen" #: ../iw/dependencies_gui.py:93 msgid "_Do not install packages that have dependencies" msgstr "_Keine Pakete mit Abhängigkeiten installieren" #: ../iw/dependencies_gui.py:97 msgid "I_gnore package dependencies" msgstr "Paketabhängigkeiten i_gnorieren" #: ../iw/desktop_choice_gui.py:25 ../textw/desktop_choice_text.py:24 msgid "Package Defaults" msgstr "Vorgaben der Paketgruppen" #: ../iw/desktop_choice_gui.py:56 msgid "" "The default installation environment includes our recommended package " "selection, including:\n" "\n" msgstr "" "Die Standard-Installationsumgebung enthält unsere empfohlene Paketauswahl, " "einschließlich:\n" "\n" #: ../iw/desktop_choice_gui.py:58 #, python-format msgid "" "\n" "\n" "After installation, additional software can be added or removed using the " "'system-config-packages' tool.\n" "\n" "If you are familiar with %s, you may have specific packages you would like " "to install or avoid installing. Check the box below to customize your " "installation." msgstr "" "\n" "\n" "Nach der Installation kann mit Hilfe des Programms 'system-config-packages' " "weitere Software hinzugefügt oder auch entfernt werden.\n" "\n" "Wenn Sie mit %s vertraut sind, möchten Sie vielleicht bestimmte Pakete " "installieren oder auch nicht installieren. Wählen Sie dazu unten die " "entsprechende Option, um Ihre Installation anzupassen." #: ../iw/desktop_choice_gui.py:70 msgid "" "If you would like to change the default package set to be installed you can " "choose to customize this below." msgstr "" "Wenn Sie die zu installierenden Standardpakete ändern möchten, können Sie " "unten die entsprechenden Einstellungen vornehmen." #: ../iw/desktop_choice_gui.py:78 msgid "_Install default software packages" msgstr "Standard-Pakete _installieren" #: ../iw/desktop_choice_gui.py:79 msgid "_Customize software packages to be installed" msgstr "Zu installierende Pakete ben_utzerdefiniert konfigurieren" #: ../iw/driveorderwidget.py:44 msgid "Drive" msgstr "Festplatte" #: ../iw/driveorderwidget.py:44 ../textw/partition_text.py:1436 msgid "Size" msgstr "Größe" #: ../iw/driveorderwidget.py:44 msgid "Model" msgstr "Modell" #: ../iw/examine_gui.py:33 msgid "Upgrade Examine" msgstr "Upgrade überprüfen" #: ../iw/examine_gui.py:60 #, python-format msgid "_Install %s" msgstr "%s _installieren" #: ../iw/examine_gui.py:62 msgid "" "Choose this option to freshly install your system. Existing software and " "data may be overwritten depending on your configuration choices." msgstr "" "Wählen Sie diese Option um eine Neuinstallation durchzuführen. Existierende " "Software und Daten werden, abhängig von Ihrer Konfigurationsauswahl, " "überschrieben." #: ../iw/examine_gui.py:66 msgid "_Upgrade an existing installation" msgstr "_Upgrade eines vorhandenen Systems durchführen" #: ../iw/examine_gui.py:68 #, python-format msgid "" "Choose this option if you would like to upgrade your existing %s system. " "This option will preserve the existing data on your drives." msgstr "" "Wählen Sie diese Option, wenn Sie Ihr bestehendes %s System aktualisieren " "wollen. Diese Option wird die auf Ihren Festplatten bestehenden Daten " "erhalten." #: ../iw/examine_gui.py:131 ../iw/pixmapRadioButtonGroup_gui.py:197 msgid "The following installed system will be upgraded:" msgstr "Das folgende installierte System wird aktualisiert:" #: ../iw/examine_gui.py:144 msgid "Unknown Linux system" msgstr "Unbekanntes Linux System" #: ../iw/fdasd_gui.py:27 msgid "fdasd" msgstr "fdasd" #: ../iw/fdasd_gui.py:28 msgid "Select drive to run fdasd on" msgstr "Festplatte zur Verwendung von fdasd auswählen" #: ../iw/fdasd_gui.py:93 msgid "" "Formatting the selected DASD device will destroy all contents of the device. " "Do you really want to format the selected DASD device?" msgstr "" "Das Formatieren des gewählten DASD-Geräts löscht den gesamten Inhalt dieses " "Gerätes.Wollen Sie das gewählte DASD-Gerät wirklich formatieren?" #: ../iw/fdisk_gui.py:26 msgid "Partitioning with fdisk" msgstr "Partitionieren mit fdisk" #: ../iw/fdisk_gui.py:103 msgid "Select a drive to partition with fdisk:" msgstr "Festplatte für das Partitionieren mit fdisk auswählen" #: ../iw/firewall_gui.py:23 ../textw/firewall_text.py:173 msgid "Disabled" msgstr "Deaktiviert" #: ../iw/firewall_gui.py:23 ../textw/firewall_text.py:175 msgid "Warn" msgstr "Warnen" #: ../iw/firewall_gui.py:23 ../textw/firewall_text.py:177 msgid "Active" msgstr "Aktiv" #: ../iw/firewall_gui.py:27 ../textw/firewall_text.py:29 msgid "Firewall" msgstr "Firewall" #: ../iw/firewall_gui.py:37 ../textw/firewall_text.py:112 msgid "Warning - No Firewall" msgstr "Warnung - Keine Firewall" #: ../iw/firewall_gui.py:38 ../textw/firewall_text.py:113 msgid "" "If this system is attached directly to the Internet or is on a large public " "network, it is recommended that a firewall be configured to help prevent " "unauthorized access. However, you have selected not to configure a " "firewall. Choose \"Proceed\" to continue without a firewall." msgstr "" "Wenn dieses System direkt an das Internet oder an ein großes öffentliches " "Netzwerk angeschlossen ist, empfiehlt es sich, eine Firewall einzusetzen um " "unerwünschte Zugriffe zu verhindern. Sie haben sich entschlossen, keine " "Firewall zu verwenden. Wählen Sie \"Fortfahren\", um ohne Firewall zu " "arbeiten." #: ../iw/firewall_gui.py:45 msgid "_Configure Firewall" msgstr "Firewall konfigurieren" #: ../iw/firewall_gui.py:45 ../iw/xconfig_gui.py:445 #: ../textw/firewall_text.py:120 msgid "_Proceed" msgstr "Fortfahren" #: ../iw/firewall_gui.py:79 ../textw/firewall_text.py:31 msgid "" "A firewall can help prevent unauthorized access to your computer from the " "outside world. Would you like to enable a firewall?" msgstr "" "Eine Firewall kann unbefugten Zugriff auf Ihren Computer von außen " "verhindern. Möchten Sie eine Firewall einrichten? " #: ../iw/firewall_gui.py:90 msgid "N_o firewall" msgstr "_Keine Firewall" #: ../iw/firewall_gui.py:92 msgid "_Enable firewall" msgstr "Aktivi_ere Firewall" #: ../iw/firewall_gui.py:109 msgid "" "You can use a firewall to allow access to specific services on your computer " "from other computers. Which services, if any, do you wish to allow access " "to ?" msgstr "" "Bei einer Firewall können Sie einzelne Dienste auf Ihrem Rechner von aussen " "erreichbar machen. Welche Dienste, wenn überhaupt, möchten Sie entsprechend " "freischalten?" #: ../iw/firewall_gui.py:146 ../textw/firewall_text.py:161 msgid "" "Security Enhanced Linux (SELinux) provides finer-grained security controls " "than those available in a traditional Linux system. It can be set up in a " "disabled state, a state which only warns about things which would be denied, " "or a fully active state." msgstr "" "Sicherheits-Erweitertes Linux (SELinux) erweitert das traditionelle Linux um " "feinere Sicherheitsmechanismen. Es kann vollständig aktiviert oder in einen " "'abgeschalteten' Zustand versetzt werden, in welchem Warnungen die sonst " "üblichen Sperren ersetzen." #: ../iw/firewall_gui.py:158 msgid "Enable _SELinux?:" msgstr "_SELinux aktivieren?:" #: ../iw/installpath_gui.py:34 ../textw/installpath_text.py:48 msgid "Installation Type" msgstr "Installationstyp" #: ../iw/ipwidget.py:92 msgid "IP Address is missing" msgstr "IP-Adresse fehlt" #: ../iw/ipwidget.py:97 msgid "IP Addresses must contain numbers between 1 and 255" msgstr "IP-Adressen müssen Zahlen zwischen 1 und 255 enthalten." #: ../iw/ipwidget.py:102 ../iw/ipwidget.py:104 msgid "IP Addresses must contain numbers between 0 and 255" msgstr "IP-Adressen müssen Zahlen zwischen 0 und 255 enthalten." #: ../iw/language_gui.py:24 ../textw/language_text.py:38 msgid "Language Selection" msgstr "Sprache auswählen" #: ../iw/language_gui.py:66 ../textw/language_text.py:39 ../loader2/lang.c:378 msgid "What language would you like to use during the installation process?" msgstr "Welche Sprache möchten Sie während des Installationsvorgangs verwenden?" #: ../iw/lvm_dialog_gui.py:113 ../iw/lvm_dialog_gui.py:160 #: ../iw/lvm_dialog_gui.py:171 ../iw/lvm_dialog_gui.py:211 #: ../iw/lvm_dialog_gui.py:287 ../iw/lvm_dialog_gui.py:590 #: ../iw/lvm_dialog_gui.py:657 ../iw/lvm_dialog_gui.py:868 #: ../textw/partition_text.py:1289 ../textw/partition_text.py:1308 msgid "Not enough space" msgstr "Nicht genügend Platz" #: ../iw/lvm_dialog_gui.py:114 msgid "" "The physical extent size cannot be changed because otherwise the space " "required by the currently defined logical volumes will be increased to more " "than the available space." msgstr "" "Die Größe der physischen Einteilungseinheiten (Extents) kann nicht geändert " "werden, da sonst der Platz für die derzeit definierten logischen Datenträger " "(Logical Volumes) größer als der verfügbare Platz wäre." #: ../iw/lvm_dialog_gui.py:123 msgid "Confirm Physical Extent Change" msgstr "Größenänderung der physischen Einteilungseinheiten (Extent) bestätigen" #: ../iw/lvm_dialog_gui.py:124 msgid "" "This change in the value of the physical extent will require the sizes of " "the current logical volume requests to be rounded up in size to an integer " "multiple of the physical extent.\n" "\n" "This change will take affect immediately." msgstr "" "Diese Änderung der Größe der physischen Einteilungseinheiten (Extent) " "erfordert, dass die Größen für die aktuellen logischen Datenträger (Logical " "Volumes) zu einem ganzen Vielfachen der Einteilungseinheiten aufgerundet " "werden.\n" "\n" "Diese Änderung wird sofort wirksam." #: ../iw/lvm_dialog_gui.py:133 ../iw/lvm_dialog_gui.py:193 #: ../iw/network_gui.py:167 ../iw/network_gui.py:171 ../iw/network_gui.py:194 msgid "C_ontinue" msgstr "_Weiter" #: ../iw/lvm_dialog_gui.py:161 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is larger than the smallest physical volume (%10.2f MB) in the " "volume group." msgstr "" "Die Größe der physischen Einteilungseinheiten (Extent) kann nicht geändert " "werden, da der gewählte Wert (%10.2f MB) größer ist als der kleinste phys. " "Datenträger (Physical Volume) (%10.2f MB) im Datenträgerverbund (Volume " "Group)." #: ../iw/lvm_dialog_gui.py:172 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is too large compared to the size of the smallest physical volume " "(%10.2f MB) in the volume group." msgstr "" "Die Größe der physischen Einteilungseinheiten (Extent) kann nicht geändert " "werden, da der gewählte Wert (%10.2f MB) größer ist als der kleinste phys. " "Datenträger (Physical Volume) (%10.2f MB) im Datenträgerverbund (Volume " "Group)." #: ../iw/lvm_dialog_gui.py:186 msgid "Too small" msgstr "Zu klein" #: ../iw/lvm_dialog_gui.py:187 msgid "" "This change in the value of the physical extent will waste substantial space " "on one or more of the physical volumes in the volume group." msgstr "" "Diese Änderung der Größe der Einteilungseinheiten (Extent) verbraucht " "wertvollen Platz in einem oder mehreren physischen Datenträgern (Physical " "Voulume) des Datenträgerverbundes (Volume Group)." #: ../iw/lvm_dialog_gui.py:212 #, python-format msgid "" "The physical extent size cannot be changed because the resulting maximum " "logical volume size (%10.2f MB) is smaller than one or more of the currently " "defined logical volumes." msgstr "" "Die Größe der Einteilungseinheiten (Extent) kann nicht geändert werden, da " "die resultierende maximale Größe eines logischen Datenträgers (Logical " "Volume) (%10.2f MB) kleiner ist als einer oder mehrere der derzeit " "definierten logischen Datenträger." #: ../iw/lvm_dialog_gui.py:288 msgid "" "You cannot remove this physical volume because otherwise the volume group " "will be too small to hold the currently defined logical volumes." msgstr "" "Sie können diesen physischen Datenträger (Physical Volume) nicht entfernen, " "da sonst der Datenträgerverbund (Volume Group) für die derzeit definierten " "logischen Datenträger (Logical Volumes) zu klein wird." #: ../iw/lvm_dialog_gui.py:368 ../textw/partition_text.py:1135 msgid "Make Logical Volume" msgstr "Logischen Datenträger (Logical Volume) anlegen" #: ../iw/lvm_dialog_gui.py:371 #, python-format msgid "Edit Logical Volume: %s" msgstr "Logischen Datenträger (Logical Volume) bearbeiten: %s" #: ../iw/lvm_dialog_gui.py:373 ../textw/partition_text.py:1133 msgid "Edit Logical Volume" msgstr "Logischen Datenträger (Logical Volume) bearbeiten" #: ../iw/lvm_dialog_gui.py:386 ../iw/partition_dialog_gui.py:292 #: ../iw/raid_dialog_gui.py:284 msgid "_Mount Point:" msgstr "_Einhängepunkt:" #: ../iw/lvm_dialog_gui.py:394 msgid "_File System Type:" msgstr "Dateisystem_typ:" #: ../iw/lvm_dialog_gui.py:402 ../iw/partition_dialog_gui.py:311 msgid "Original File System Type:" msgstr "Ursprünglicher Dateisystemtyp:" #: ../iw/lvm_dialog_gui.py:407 ../iw/partition_dialog_gui.py:322 #: ../iw/raid_dialog_gui.py:305 msgid "Unknown" msgstr "Unbekannt" #: ../iw/lvm_dialog_gui.py:413 msgid "_Logical Volume Name:" msgstr "_Logical Volume-Name:" #: ../iw/lvm_dialog_gui.py:421 ../textw/partition_text.py:284 msgid "Logical Volume Name:" msgstr "Logical Volume-Name:" #: ../iw/lvm_dialog_gui.py:429 ../iw/partition_dialog_gui.py:367 msgid "_Size (MB):" msgstr "_Größe (MB):" #: ../iw/lvm_dialog_gui.py:435 ../iw/partition_dialog_gui.py:384 #: ../iw/partition_dialog_gui.py:427 ../textw/partition_text.py:299 #: ../textw/partition_text.py:376 ../textw/partition_text.py:459 #: ../textw/partition_text.py:567 msgid "Size (MB):" msgstr "Größe (MB):" #: ../iw/lvm_dialog_gui.py:450 #, python-format msgid "(Max size is %s MB)" msgstr "(Max. Größe: %s MB)" #: ../iw/lvm_dialog_gui.py:511 msgid "Illegal size" msgstr "Ungültige Größe" #: ../iw/lvm_dialog_gui.py:512 msgid "The requested size as entered is not a valid number greater than 0." msgstr "Die eingegebene, erforderliche Größe ist keine gültige Zahl größer als 0." #: ../iw/lvm_dialog_gui.py:545 msgid "Mount point in use" msgstr "Einhängepunkt in Gebrauch" #: ../iw/lvm_dialog_gui.py:546 #, python-format msgid "The mount point \"%s\" is in use, please pick another." msgstr "" "Der Einhängepunkt \"%s\" wird bereits verwendet. Wählen Sie einen anderen " "Einhängepunkt." #: ../iw/lvm_dialog_gui.py:557 ../textw/partition_text.py:1257 msgid "Illegal Logical Volume Name" msgstr "Ungültiger Name des logischen Datenträgers (Logical Volume)" #: ../iw/lvm_dialog_gui.py:576 ../textw/partition_text.py:1274 msgid "Illegal logical volume name" msgstr "Ungültiger Name des logischen Datenträgers (Logical Volume)" #: ../iw/lvm_dialog_gui.py:577 ../textw/partition_text.py:1275 #, python-format msgid "The logical volume name \"%s\" is already in use. Please pick another." msgstr "" "Der Name des logischen Datenträgers (Logical Volume) \"%s\" wird bereits " "verwendet. Wählen Sie einen anderen Namen." #: ../iw/lvm_dialog_gui.py:591 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than maximum logical volume " "size (%10.2f MB). To increase this limit you can increase the Physical " "Extent size for this Volume Group." msgstr "" "Die derzeit erforderliche Größe (%10.2f MB) ist größer als die maximale " "Größe des logischen Datenträgers (Logical Volume) (%10.2f MB). Um diesen " "Grenzwert zu erhöhen, können Sie die Größe der Einheiten (Extents) für " "diesen Datenträgerverbund (Volume Group) erhöhen." #: ../iw/lvm_dialog_gui.py:634 ../iw/partition_dialog_gui.py:179 #: ../iw/partition_dialog_gui.py:191 ../iw/partition_dialog_gui.py:239 #: ../iw/raid_dialog_gui.py:211 ../textw/partition_text.py:908 #: ../textw/partition_text.py:930 ../textw/partition_text.py:1103 #: ../textw/partition_text.py:1328 msgid "Error With Request" msgstr "Fehler bei Anfrage" #: ../iw/lvm_dialog_gui.py:658 ../iw/lvm_dialog_gui.py:869 #, python-format msgid "" "The logical volumes you have configured require %g MB, but the volume group " "only has %g MB. Please either make the volume group larger or make the " "logical volume(s) smaller." msgstr "" "Die von Ihnen konfigurierten logischen Datenträger (Logical Volumes) " "benötigen %g MB, der Datenträgerverbund (Volume Group) besitzt jedoch nur %g " "MB. Vergrößern Sie den Datenträgerverbund oder verkleinern Sie den/die " "logischen Datenträger." #: ../iw/lvm_dialog_gui.py:708 msgid "No free slots" msgstr "Keine freien Plätze" #: ../iw/lvm_dialog_gui.py:709 #, python-format msgid "You cannot create more than %s logical volumes per volume group." msgstr "" "Sie können nicht mehr als %s logische Datenträger (Logical Volumes) pro " "Datenträgerverbund anlegen." #: ../iw/lvm_dialog_gui.py:715 msgid "No free space" msgstr "Kein freier Platz" #: ../iw/lvm_dialog_gui.py:716 msgid "" "There is no room left in the volume group to create new logical volumes. To " "add a logical volume you will need to reduce the size of one or more of the " "currently existing logical volumes" msgstr "" "Es ist kein Platz im Datenträgerverbund (Volume Group) verfügbar, um neue " "logische Datenträger (Logical Volumes) anzulegen. Wenn Sie einen logischen " "Datenträger hinzufügen möchten, müssen Sie die Größe von einem oder mehreren " "der derzeit existierenden logischen Datenträger reduzieren." #: ../iw/lvm_dialog_gui.py:744 #, python-format msgid "Are you sure you want to Delete the logical volume \"%s\"?" msgstr "" "Möchten Sie den logische Datenträger (Logical Volume) \"%s\" wirklich " "löschen?" #: ../iw/lvm_dialog_gui.py:880 msgid "Invalid Volume Group Name" msgstr "Ungültiger Name für den Datenträgerverbund (Volume Group)" #: ../iw/lvm_dialog_gui.py:893 msgid "Name in use" msgstr "Name in Gebrauch" #: ../iw/lvm_dialog_gui.py:894 #, python-format msgid "The volume group name \"%s\" is already in use. Please pick another." msgstr "" "Der Name für den Datenträgerverbund (Volume Group) \"%s\" wird bereits " "verwendet. Wählen Sie einen anderen Namen." #: ../iw/lvm_dialog_gui.py:938 msgid "Not enough physical volumes" msgstr "Nicht genügend physische Datenträger (Physical Volumes)" #: ../iw/lvm_dialog_gui.py:939 msgid "" "At least one unused physical volume partition is needed to create an LVM " "Volume Group.\n" "\n" "Create a partition or RAID array of type \"physical volume (LVM)\" and then " "select the \"LVM\" option again." msgstr "" "Es ist mindestens eine neue Partition des Typs \"physical volume (LVM)\" " "notwendig, um einen LVM Datenträgerverbund anzulegen.\n" "\n" "Legen Sie zunächst eine Partition oder RAID-Array des Typs \"physical volume " "(LVM)\" an und wählen Sie anschließend erneut die Option \"LVM\"." #: ../iw/lvm_dialog_gui.py:950 msgid "Make LVM Volume Group" msgstr "LVM Datenträgerverbund (Volume Group) erstellen" #: ../iw/lvm_dialog_gui.py:953 #, python-format msgid "Edit LVM Volume Group: %s" msgstr "LVM Datenträgerverbund (Volume Group) bearbeiten: %s" #: ../iw/lvm_dialog_gui.py:955 msgid "Edit LVM Volume Group" msgstr "LVM Datenträgerverbund (Volume Group) bearbeiten" #: ../iw/lvm_dialog_gui.py:971 msgid "_Volume Group Name:" msgstr "_Volume Group-Name" #: ../iw/lvm_dialog_gui.py:979 msgid "Volume Group Name:" msgstr "Volume Group-Name:" #: ../iw/lvm_dialog_gui.py:987 msgid "_Physical Extent:" msgstr "_Phys. Einheit (Extent):" #: ../iw/lvm_dialog_gui.py:1002 msgid "Physical Volumes to _Use:" msgstr "Zu n_utzende Physical Volumes" #: ../iw/lvm_dialog_gui.py:1008 msgid "Used Space:" msgstr "Verwendeter Platz:" #: ../iw/lvm_dialog_gui.py:1025 msgid "Free Space:" msgstr "Freier Platz:" #: ../iw/lvm_dialog_gui.py:1043 msgid "Total Space:" msgstr "Gesamter Platz: " #: ../iw/lvm_dialog_gui.py:1072 msgid "Logical Volume Name" msgstr "Logical Volume-Name" #: ../iw/lvm_dialog_gui.py:1078 ../iw/partition_gui.py:366 msgid "Size (MB)" msgstr "Größe (MB)" #: ../iw/lvm_dialog_gui.py:1092 ../iw/osbootwidget.py:96 ../iw/zfcp_gui.py:98 msgid "_Add" msgstr "_Hinzufügen" #: ../iw/lvm_dialog_gui.py:1095 ../iw/network_gui.py:535 #: ../iw/osbootwidget.py:100 ../iw/partition_gui.py:1355 ../iw/zfcp_gui.py:101 msgid "_Edit" msgstr "B_earbeiten" #: ../iw/lvm_dialog_gui.py:1110 msgid "Logical Volumes" msgstr "Logische Datenträger (Logical Volumes)" #: ../iw/mouse_gui.py:24 msgid "Mouse Configuration" msgstr "Maus konfigurieren" #: ../iw/mouse_gui.py:78 ../textw/mouse_text.py:20 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "/dev/ttyS0 (COM1 unter DOS)" #: ../iw/mouse_gui.py:79 ../textw/mouse_text.py:21 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "/dev/ttyS1 (COM2 unter DOS)" #: ../iw/mouse_gui.py:80 ../textw/mouse_text.py:22 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "/dev/ttyS2 (COM3 unter DOS)" #: ../iw/mouse_gui.py:81 ../textw/mouse_text.py:23 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "/dev/ttyS3 (COM4 unter DOS)" #: ../iw/mouse_gui.py:91 ../iw/osbootwidget.py:157 msgid "_Device" msgstr "_Gerät" #: ../iw/mouse_gui.py:137 msgid "_Model" msgstr "_Modell" #: ../iw/mouse_gui.py:235 msgid "_Emulate 3 buttons" msgstr "3 Tasten _emulieren" #: ../iw/mouse_gui.py:250 msgid "Select the appropriate mouse for the system." msgstr "Wählen Sie die passende Maus für Ihr System." #: ../iw/network_gui.py:27 ../iw/network_gui.py:612 msgid "Gateway" msgstr "Gateway" #: ../iw/network_gui.py:27 ../iw/network_gui.py:614 msgid "Primary DNS" msgstr "Primärer DNS" #: ../iw/network_gui.py:28 ../iw/network_gui.py:616 msgid "Secondary DNS" msgstr "Sekundärer DNS" #: ../iw/network_gui.py:28 ../iw/network_gui.py:618 msgid "Tertiary DNS" msgstr "Tertiärer DNS" #: ../iw/network_gui.py:30 msgid "_Gateway" msgstr "_Gateway" #: ../iw/network_gui.py:30 msgid "_Primary DNS" msgstr "_Primärer DNS" #: ../iw/network_gui.py:31 msgid "_Secondary DNS" msgstr "_Sekundärer DNS" #: ../iw/network_gui.py:31 msgid "_Tertiary DNS" msgstr "_Tertiärer DNS" #: ../iw/network_gui.py:35 msgid "Network Configuration" msgstr "Netzwerk konfigurieren" #: ../iw/network_gui.py:166 ../iw/network_gui.py:170 ../iw/network_gui.py:174 #: ../iw/network_gui.py:179 ../iw/network_gui.py:185 ../iw/network_gui.py:189 #: ../iw/network_gui.py:194 ../iw/zfcp_gui.py:160 ../iw/zfcp_gui.py:224 #: ../textw/zfcp_text.py:63 msgid "Error With Data" msgstr "Fehler mit Daten" #: ../iw/network_gui.py:167 msgid "" "You have not specified a hostname. Depending on your network environment " "this may cause problems later." msgstr "" "Sie haben keinen Rechnernamen angegeben. Je nach Ihrer Netzwerk-Umgebung " "könnte dies später zu Problemen führen." #: ../iw/network_gui.py:171 #, python-format msgid "" "You have not specified the field \"%s\". Depending on your network " "environment this may cause problems later." msgstr "" "Sie haben im Feld \"%s\" keinen Wert eingegeben. Je nach Ihrer Netzwerk-" "Umgebung könnte dies später zu Problemen führen." #: ../iw/network_gui.py:175 ../textw/network_text.py:414 #, python-format msgid "" "The hostname \"%s\" is not valid for the following reason:\n" "\n" "%s" msgstr "" "Der Rechnername \"%s\" ist aus folgendem Grund ungültig:\n" "\n" "%s" #: ../iw/network_gui.py:180 #, python-format msgid "" "An error occurred converting the value entered for \"%s\":\n" "%s" msgstr "" "Beim Konvertieren des für \"%s\" eingegebenen Wertes ist ein Fehler " "aufgetreten:\n" "%s" #: ../iw/network_gui.py:186 #, python-format msgid "A value is required for the field \"%s\"." msgstr "In das Feld \"%s\" muss ein Wert eingegeben werden." #: ../iw/network_gui.py:190 msgid "The IP information you have entered is invalid." msgstr "Die eingegebene IP-Information ist ungültig." #: ../iw/network_gui.py:194 msgid "" "You have no active network devices. Your system will not be able to " "communicate over a network by default without at least one device active.\n" "\n" "NOTE: If you have a PCMCIA-based network adapter you should leave it " "inactive at this point. When you reboot your system the adapter will be " "activated automatically." msgstr "" "Es liegen keine aktiven Netzwerk-Geräte vor. Ihr System ist ohne mindestens " "ein aktives Gerät nicht in der Lage, standardmäßig über ein Netzwerk zu\n" "kommunizieren.\n" "BITTE BEACHTEN: Wenn Sie einen PCMCIA-basierten Netzwerk-Adapter besitzen," "lassen Sie ihn inaktiv. Beim Neustarten Ihres Systems wird er automatisch " "aktiviert." #: ../iw/network_gui.py:213 #, python-format msgid "Edit Interface %s" msgstr "Schnittstelle %s bearbeiten" #: ../iw/network_gui.py:224 msgid "Configure using _DHCP" msgstr "Mittels _DHCP konfigurieren" #: ../iw/network_gui.py:230 msgid "_Activate on boot" msgstr "Beim Starten _aktivieren" #: ../iw/network_gui.py:239 msgid "_IP Address" msgstr "_IP-Adresse" #: ../iw/network_gui.py:240 msgid "Net_mask" msgstr "Netz_maske" #: ../iw/network_gui.py:245 msgid "_Point to Point (IP)" msgstr "_Punkt zu Punkt (IP)" #: ../iw/network_gui.py:249 msgid "_ESSID" msgstr "_ESSID" #: ../iw/network_gui.py:250 msgid "Encryption _Key" msgstr "_Kryptoschlüssel" #: ../iw/network_gui.py:261 msgid "Hardware address:" msgstr "Hardware-Adresse:" #: ../iw/network_gui.py:300 #, python-format msgid "Configure %s" msgstr "%s konfigurieren" #: ../iw/network_gui.py:474 msgid "Active on Boot" msgstr "Beim Starten aktiv" #: ../iw/network_gui.py:476 ../iw/osbootwidget.py:67 #: ../iw/partition_gui.py:360 ../textw/bootloader_text.py:194 #: ../textw/bootloader_text.py:265 ../textw/mouse_text.py:38 #: ../textw/partition_text.py:1436 msgid "Device" msgstr "Gerät" #: ../iw/network_gui.py:478 msgid "IP/Netmask" msgstr "IP/Netzmaske" #: ../iw/network_gui.py:542 msgid "Network Devices" msgstr "Netzwerk-Geräte" #: ../iw/network_gui.py:553 msgid "Set the hostname:" msgstr "Rechnername einstellen:" #: ../iw/network_gui.py:558 msgid "_automatically via DHCP" msgstr "_automatisch über DHCP" #: ../iw/network_gui.py:565 msgid "_manually" msgstr "_manuell" #: ../iw/network_gui.py:569 msgid "(ex. \"host.domain.com\")" msgstr "(z.B. \"host.domain.com\")" #: ../iw/network_gui.py:575 ../loader2/net.c:810 msgid "Hostname" msgstr "Rechnername" #: ../iw/network_gui.py:623 msgid "Miscellaneous Settings" msgstr "Verschiedene Einstellungen" #: ../iw/osbootwidget.py:43 msgid "" "You can configure the boot loader to boot other operating systems. It will " "allow you to select an operating system to boot from the list. To add " "additional operating systems, which are not automatically detected, click " "'Add.' To change the operating system booted by default, select 'Default' by " "the desired operating system." msgstr "" "Sie können den Bootloader für das Booten von anderen Betriebssystemen " "konfigurieren. Wählen Sie hierzu ein Betriebssystem aus der Liste. Wenn Sie " "Betriebssysteme hinzufügen möchten, die nicht automatisch ermittelt wurden, " "wählen Sie 'Hinzufügen.' Wenn Sie das standardmäßig gestartete " "Betriebssystem ändern möchten, wählen Sie für das gewünschte Betriebssystem " "'Standard'." #: ../iw/osbootwidget.py:67 ../textw/bootloader_text.py:265 #: ../textw/xconfig_text.py:413 ../textw/xconfig_text.py:420 #: ../textw/xconfig_text.py:547 ../textw/xconfig_text.py:548 #: ../textw/xconfig_text.py:567 ../textw/xconfig_text.py:568 msgid "Default" msgstr "Standard" #: ../iw/osbootwidget.py:67 msgid "Label" msgstr "Kennung" #: ../iw/osbootwidget.py:130 msgid "Image" msgstr "Image" #: ../iw/osbootwidget.py:137 msgid "" "Enter a label to be displayed in the boot loader menu. The device (or hard " "drive and partition number) is the device from which it boots." msgstr "" "Geben Sie eine Kennung ein, die im Bootloader-Menü angezeigt werden soll. " "Das Gerät (oder Festplatte und Partitionsnummer) ist das Gerät, von dem aus " "gebootet wird." #: ../iw/osbootwidget.py:149 msgid "_Label" msgstr "_Kennung" #: ../iw/osbootwidget.py:188 msgid "Default Boot _Target" msgstr "S_tandardmäßige Auswahl" #: ../iw/osbootwidget.py:217 msgid "You must specify a label for the entry" msgstr "Geben Sie eine Kennung für den Eintrag an." #: ../iw/osbootwidget.py:226 msgid "Boot label contains illegal characters" msgstr "Bootkennung enthält ungültige Zeichen." #: ../iw/osbootwidget.py:250 msgid "Duplicate Label" msgstr "Doppelte Kennung" #: ../iw/osbootwidget.py:251 msgid "This label is already in use for another boot entry." msgstr "Diese Kennung wird bereits für einen anderen Booteintrag verwendet." #: ../iw/osbootwidget.py:264 msgid "Duplicate Device" msgstr "Doppeltes Gerät" #: ../iw/osbootwidget.py:265 msgid "This device is already being used for another boot entry." msgstr "Dieses Gerät wird bereits für einen anderen Booteintrag verwendet." #: ../iw/osbootwidget.py:329 ../textw/bootloader_text.py:354 msgid "Cannot Delete" msgstr "Löschen nicht möglich" #: ../iw/osbootwidget.py:330 ../textw/bootloader_text.py:355 #, python-format msgid "" "This boot target cannot be deleted because it is for the %s system you are " "about to install." msgstr "" "Dieses Boot-Target kann nicht gelöscht werden, da es für das %s System " "gedacht ist, das Sie installieren möchten." #: ../iw/package_gui.py:52 ../textw/packages_text.py:320 msgid "Individual Package Selection" msgstr "Pakete individuell auswählen" #: ../iw/package_gui.py:66 msgid "All Packages" msgstr "Alle Pakete" #: ../iw/package_gui.py:186 #, python-format msgid "" "Package: %s\n" "Version: %s\n" msgstr "" "Paket: %s\n" "Version: %s\n" #: ../iw/package_gui.py:357 msgid "_Tree View" msgstr "Baums_trukturansicht" #: ../iw/package_gui.py:359 msgid "_Flat View" msgstr "_Lineare Ansicht" #: ../iw/package_gui.py:374 msgid "_Package" msgstr "_Paket" #: ../iw/package_gui.py:376 msgid "_Size (MB)" msgstr "_Größe (MB)" #: ../iw/package_gui.py:427 msgid "Total size: " msgstr "Gesamtgröße: " #: ../iw/package_gui.py:430 msgid "Select _all in group" msgstr "_Alle in der Gruppe auswählen" #: ../iw/package_gui.py:434 msgid "_Unselect all in group" msgstr "A_uswahl aller in Gruppe löschen" #: ../iw/package_gui.py:471 ../textw/packages_text.py:63 msgid "Package Group Selection" msgstr "Paketgruppen auswählen" #: ../iw/package_gui.py:678 msgid "Minimal" msgstr "Minimal" #: ../iw/package_gui.py:740 #, python-format msgid "Details for '%s'" msgstr "Details für '%s'" #: ../iw/package_gui.py:749 msgid "" "A package group can have both Base and Optional package members. Base " "packages are always selected as long as the package group is selected.\n" "\n" "Select the optional packages to be installed:" msgstr "" "Eine Paketgruppe kann sowohl Basis- als auch optionale Paketbestandteile " "enthalten. Basispakete sind grundsätzlich ausgewählt, sofern die Paketgruppe " "ausgewählt ist.\n" "\n" "Wählen Sie die optionalen Pakete, die installiert werden sollen:" #: ../iw/package_gui.py:786 msgid "Base Packages" msgstr "Basis-Pakete" #: ../iw/package_gui.py:816 msgid "Optional Packages" msgstr "Optionale Pakete" #: ../iw/package_gui.py:1019 msgid "Details" msgstr "Details" #: ../iw/package_gui.py:1113 msgid "_Select individual packages" msgstr "Einzelne Pakete au_swählen" #: ../iw/partition_dialog_gui.py:58 msgid "Additional Size Options" msgstr "Zusätzliche Optionen für die Größe" #: ../iw/partition_dialog_gui.py:63 msgid "_Fixed size" msgstr "_Feste Größe" #: ../iw/partition_dialog_gui.py:65 msgid "Fill all space _up to (MB):" msgstr "Den gesamten Platz a_usfüllen bis (MB):" #: ../iw/partition_dialog_gui.py:75 msgid "Fill to maximum _allowable size" msgstr "Bis zur maximal erl_aubten Größe ausfüllen" #: ../iw/partition_dialog_gui.py:180 msgid "The end cylinder must be greater than the start cylinder." msgstr "Der End-Zylinder muss größer sein als der Start-Zylinder." #: ../iw/partition_dialog_gui.py:269 ../textw/partition_text.py:709 msgid "Add Partition" msgstr "Partition hinzufügen" #: ../iw/partition_dialog_gui.py:272 #, python-format msgid "Edit Partition: /dev/%s" msgstr "Partition bearbeiten: /dev/%s" #: ../iw/partition_dialog_gui.py:274 msgid "Edit Partition" msgstr "Partition bearbeiten" #: ../iw/partition_dialog_gui.py:301 ../iw/raid_dialog_gui.py:292 msgid "File System _Type:" msgstr "Dateisystem_typ:" #: ../iw/partition_dialog_gui.py:333 msgid "Allowable _Drives:" msgstr "Verfügbare _Festplatten:" #: ../iw/partition_dialog_gui.py:346 msgid "Drive:" msgstr "Festplatte:" #: ../iw/partition_dialog_gui.py:355 msgid "Original File System Label:" msgstr "Ursprüngliche Dateisystemkennung:" #: ../iw/partition_dialog_gui.py:390 msgid "_Start Cylinder:" msgstr "_Start-Zylinder:" #: ../iw/partition_dialog_gui.py:408 msgid "_End Cylinder:" msgstr "_End-Zylinder:" #: ../iw/partition_dialog_gui.py:459 msgid "Force to be a _primary partition" msgstr "Verwendung als _primäre Partition erzwingen." #: ../iw/partition_gui.py:362 ../textw/partition_text.py:1436 msgid "Type" msgstr "Typ" #: ../iw/partition_gui.py:365 msgid "Format" msgstr "Formatieren" #: ../iw/partition_gui.py:367 ../textw/partition_text.py:1436 msgid "Start" msgstr "Start" #: ../iw/partition_gui.py:368 ../textw/partition_text.py:1436 msgid "End" msgstr "Ende" #: ../iw/partition_gui.py:405 msgid "" "Mount Point/\n" "RAID/Volume" msgstr "" "Einhängepunkt/\n" "RAID/Volume" #: ../iw/partition_gui.py:407 msgid "" "Size\n" "(MB)" msgstr "" "Größe\n" "(MB)" #: ../iw/partition_gui.py:539 ../textw/partition_text.py:1430 msgid "Partitioning" msgstr "Partitionieren" #: ../iw/partition_gui.py:631 msgid "The following critical errors exist with your requested partitioning scheme." msgstr "" "Die folgenden kritischen Fehler bestehen mit dem geforderten " "Partitionsschema." #: ../iw/partition_gui.py:634 #, python-format msgid "These errors must be corrected prior to continuing with your install of %s." msgstr "" "Diese Fehler müssen korrigiert werden, bevor Sie mit der Installation von %s " "fortfahren." #: ../iw/partition_gui.py:640 msgid "Partitioning Errors" msgstr "Partitionierfehler" #: ../iw/partition_gui.py:646 msgid "The following warnings exist with your requested partition scheme." msgstr "" "Die folgenden Warnungen wurden für das geforderte\n" "Partitionsschema ausgegeben." #: ../iw/partition_gui.py:648 msgid "Would you like to continue with your requested partitioning scheme?" msgstr "Möchten Sie mit dem geforderten Partitionsschema fortfahren?" #: ../iw/partition_gui.py:653 msgid "Partitioning Warnings" msgstr "Partitionierwarnungen" #: ../iw/partition_gui.py:675 msgid "Format Warnings" msgstr "Formatierwarnungen" #: ../iw/partition_gui.py:680 msgid "_Format" msgstr "_Formatieren" #: ../iw/partition_gui.py:715 msgid "LVM Volume Groups" msgstr "LVM Datenträgergruppen" #: ../iw/partition_gui.py:750 msgid "RAID Devices" msgstr "RAID-Geräte" #: ../iw/partition_gui.py:778 ../iw/partition_gui.py:904 #: ../textw/partition_text.py:94 ../textw/partition_text.py:157 msgid "None" msgstr "Keine" #: ../iw/partition_gui.py:796 ../loader2/hdinstall.c:330 msgid "Hard Drives" msgstr "Festplatten" #: ../iw/partition_gui.py:867 ../textw/partition_text.py:139 #: ../textw/partition_text.py:178 msgid "Free space" msgstr "Freier Platz" #: ../iw/partition_gui.py:869 ../textw/partition_text.py:141 msgid "Extended" msgstr "Erweitert" #: ../iw/partition_gui.py:871 ../textw/partition_text.py:143 msgid "software RAID" msgstr "Software RAID" #: ../iw/partition_gui.py:906 msgid "Free" msgstr "Frei" #: ../iw/partition_gui.py:996 ../textw/partition_text.py:226 #, python-format msgid "Could not allocate requested partitions: %s." msgstr "Geforderte Partitionen konnten nicht zugewiesen werden: %s." #: ../iw/partition_gui.py:1005 #, python-format msgid "Warning: %s." msgstr "Warnung: %s." #: ../iw/partition_gui.py:1189 ../iw/partition_gui.py:1203 msgid "Not supported" msgstr "Nicht unterstützt" #: ../iw/partition_gui.py:1190 msgid "LVM is NOT supported on this platform." msgstr "LVM wird auf dieser Plattform NICHT unterstützt." #: ../iw/partition_gui.py:1204 msgid "Software RAID is NOT supported on this platform." msgstr "Software RAID wird auf dieser Plattform NICHT unterstützt." #: ../iw/partition_gui.py:1211 msgid "No RAID minor device numbers available" msgstr "Keine RAID Geräte-Nummern verfügbar." #: ../iw/partition_gui.py:1212 msgid "" "A software RAID device cannot be created because all of the available RAID " "minor device numbers have been used." msgstr "" "Es kann kein Software-RAID-Gerät angelegt werden, da alle verfügbaren Geräte-" "Nummern bereits verwendet werden." #: ../iw/partition_gui.py:1226 msgid "RAID Options" msgstr "RAID-Optionen" #: ../iw/partition_gui.py:1237 #, python-format msgid "" "Software RAID allows you to combine several disks into a larger RAID " "device. A RAID device can be configured to provide additional speed and " "reliability compared to using an individual drive. For more information on " "using RAID devices please consult the %s documentation.\n" "\n" "You currently have %s software RAID partition(s) free to use.\n" "\n" msgstr "" "Software RAID ermöglicht die Kombination verschiedener Laufwerke zu einem " "größeren RAID-Gerät. Durch die Kombination von RAID-Geräten wird die " "Geschwindigkeit und Zuverlässigkeit im Vergleich zur Verwendung von nur " "einer Festplatte erhöht. Weitere Informationen über den Gebrauch von RAID-" "Geräten finden Sie in der %s Dokumentation.\n" "\n" "Derzeit stehen Ihnen %s Software RAID Partitionen zur Verfügung.\n" "\n" #: ../iw/partition_gui.py:1248 msgid "" "To use RAID you must first create at least two partitions of type 'software " "RAID'. Then you can create a RAID device which can be formatted and " "mounted.\n" "\n" msgstr "" "Um RAID zu verwenden, müssen Sie mindestens zwei Partitionen des Typs " "'Software RAID' erstellen. Anschließend können Sie ein RAID-Gerät erstellen, " "das formatiert und eingebunden werden kann.\n" "\n" #: ../iw/partition_gui.py:1254 msgid "What do you want to do now?" msgstr "Was möchten Sie nun tun?" #: ../iw/partition_gui.py:1263 msgid "Create a software RAID _partition." msgstr "Software RAID _Partition anlegen." #: ../iw/partition_gui.py:1266 #, python-format msgid "Create a RAID _device [default=/dev/md%s]." msgstr "RAI_D Gerät anlegen [Standard=/dev/md%s]." #: ../iw/partition_gui.py:1270 #, python-format msgid "Clone a _drive to create a RAID device [default=/dev/md%s]." msgstr "Festplatte klonen, um ein RAI_D-Gerät anzulegen [Standard=/dev/md%s]." #: ../iw/partition_gui.py:1309 msgid "Couldn't Create Drive Clone Editor" msgstr "Festplatten-Klon-Editor konnte nicht gestartet werden." #: ../iw/partition_gui.py:1310 msgid "The drive clone editor could not be created for some reason." msgstr "" "Der Festplatten-Klon-Editor konnte nicht aus irgendeinem Grund nicht " "gestartet werden." #: ../iw/partition_gui.py:1354 msgid "Ne_w" msgstr "_Neu" #: ../iw/partition_gui.py:1357 msgid "Re_set" msgstr "Rück_setzen" #: ../iw/partition_gui.py:1358 msgid "R_AID" msgstr "R_AID" #: ../iw/partition_gui.py:1359 msgid "_LVM" msgstr "L_VM" #: ../iw/partition_gui.py:1400 msgid "Hide RAID device/LVM Volume _Group members" msgstr "RAID-Gerät/LVM Datenträgerverbund-Bestandteile ausblenden" #: ../iw/partition_gui.py:1415 ../textw/partition_text.py:1520 msgid "Automatic Partitioning" msgstr "Automatisches Partitionieren" #: ../iw/partition_gui.py:1477 msgid "I want to have automatic partitioning:" msgstr "Ich möchte eine automatische Partitionierung:" #: ../iw/partition_gui.py:1508 msgid "Select the drive(s) to use for this installation:" msgstr "" "Wählen Sie die Festplatte/n, die für die Installation verwendet werden " "sollen:" #: ../iw/partition_gui.py:1532 msgid "Re_view (and modify if needed) the partitions created" msgstr "Angelegte Partitionen _prüfen (und wenn nötig ändern)" #: ../iw/partition_ui_helpers_gui.py:91 ../iw/partition_ui_helpers_gui.py:112 #: ../iw/partition_ui_helpers_gui.py:114 ../textw/partition_text.py:249 #: ../textw/partition_text.py:251 ../textw/partition_text.py:253 #: ../textw/partition_text.py:278 msgid "" msgstr "" #: ../iw/partition_ui_helpers_gui.py:245 msgid "How would you like to prepare the file system on this partition?" msgstr "Wie möchten Sie das Dateisystem auf dieser Partition einstellen?" #: ../iw/partition_ui_helpers_gui.py:253 msgid "Leave _unchanged (preserve data)" msgstr "Bleibt _unverändert (Datenerhalt)" #: ../iw/partition_ui_helpers_gui.py:259 msgid "_Format partition as:" msgstr "Partition _formatieren als:" #: ../iw/partition_ui_helpers_gui.py:282 msgid "Mi_grate partition to:" msgstr "Partition mi_grieren zu:" #: ../iw/partition_ui_helpers_gui.py:304 msgid "Check for _bad blocks?" msgstr "Auf defekte _Blöcke überprüfen?" #: ../iw/partition_ui_helpers_gui.py:339 #, python-format msgid "" "Partitions of type '%s' must be constrained to a single drive. This is done " "by selecting the drive in the 'Allowable Drives' checklist." msgstr "" "Die Partitionen des Typs '%s' müssen sich auf einer einzigen Festplatte " "befinden. Wählen Sie hierzu die Festplatte in der Prüfliste 'Zugelassene " "Festplatten'." #: ../iw/partmethod_gui.py:25 ../textw/partmethod_text.py:24 msgid "Disk Partitioning Setup" msgstr "Festplattenpartitionierung einstellen" #: ../iw/partmethod_gui.py:53 msgid "_Automatically partition" msgstr "_Automatisches Partitionieren" #: ../iw/partmethod_gui.py:56 msgid "Manually partition with _Disk Druid" msgstr "Manuelles Partitionieren mit _Disk Druid" #: ../iw/progress_gui.py:41 #, python-format msgid "%s MB" msgstr "%s MB" #: ../iw/progress_gui.py:44 #, python-format msgid "%s KB" msgstr "%s KB" #: ../iw/progress_gui.py:47 #, python-format msgid "%s Byte" msgstr "%s Byte" #: ../iw/progress_gui.py:49 #, python-format msgid "%s Bytes" msgstr "%s Bytes" #: ../iw/progress_gui.py:53 msgid "Installing Packages" msgstr "Installieren der Pakete" #: ../iw/progress_gui.py:167 #, python-format msgid "Remaining time: %s minutes" msgstr "Verbleibend: %s Minuten" #: ../iw/progress_gui.py:183 #, python-format msgid "Downloading %s" msgstr "Herunterladen - %s" #: ../iw/progress_gui.py:223 #, python-format msgid "Installing %s-%s-%s.%s (%s)" msgstr "Installiere %s-%s-%s.%s (%s)" #: ../iw/progress_gui.py:354 msgid "Summary" msgstr "Zusammenfassung" #: ../iw/progress_gui.py:381 ../textw/progress_text.py:130 msgid "Status: " msgstr "Status: " #: ../iw/raid_dialog_gui.py:251 msgid "" "At least two unused software RAID partitions are needed to create a RAID " "device.\n" "\n" "First create at least two partitions of type \"software RAID\", and then " "select the \"RAID\" option again." msgstr "" "Mindestens zwei neue Software RAID Partitionen sind erforderlich, um ein " "RAID-Gerät zu erstellen.\n" "\n" "Legen Sie zunächst zwei Partitionen des Typs \"Software RAID\" an und wählen " "Sie anschließend erneut die \"RAID\" Option." #: ../iw/raid_dialog_gui.py:265 ../iw/raid_dialog_gui.py:669 #: ../textw/partition_text.py:965 msgid "Make RAID Device" msgstr "RAID-Gerät erstellen" #: ../iw/raid_dialog_gui.py:268 #, python-format msgid "Edit RAID Device: /dev/md%s" msgstr "RAID-Gerät bearbeiten: /dev/md%s" #: ../iw/raid_dialog_gui.py:270 ../textw/partition_text.py:963 msgid "Edit RAID Device" msgstr "RAID-Gerät bearbeiten" #: ../iw/raid_dialog_gui.py:311 msgid "RAID _Device:" msgstr "RAI_D-Gerät" #: ../iw/raid_dialog_gui.py:329 msgid "RAID _Level:" msgstr "RAID-_Level:" #: ../iw/raid_dialog_gui.py:370 msgid "_RAID Members:" msgstr "_RAID-Bestandteile:" #: ../iw/raid_dialog_gui.py:387 msgid "Number of _spares:" msgstr "Anzahl der _Spare-Geräte:" #: ../iw/raid_dialog_gui.py:397 msgid "_Format partition?" msgstr "Partition _formatieren?" #: ../iw/raid_dialog_gui.py:476 msgid "" "The source drive has no partitions to be cloned. You must first define " "partitions of type 'software RAID' on this drive before it can be cloned." msgstr "" "Die Quell-Festplatte besitzt keine zu klonenden Partitionen. Sie müssen " "zunächst Partitionen des Typs 'Software RAID' auf dieser Festplatte " "definieren, bevor das Klonen möglich ist." #: ../iw/raid_dialog_gui.py:480 ../iw/raid_dialog_gui.py:486 #: ../iw/raid_dialog_gui.py:498 ../iw/raid_dialog_gui.py:511 msgid "Source Drive Error" msgstr "Quellfestplatten-Fehler" #: ../iw/raid_dialog_gui.py:487 msgid "" "The source drive selected has partitions on it which are not of type " "'software RAID'.\n" "\n" "These partitions will have to be removed before this drive can be cloned. " msgstr "" "Die gewählte Quell-Festplatte besitzt Partitionen, die nicht vom Typ " "'Software RAID' sind.\n" "\n" "Diese Partitionen müssen entfernt werden, bevor diese Festplatte geklont " "werden kann." #: ../iw/raid_dialog_gui.py:499 #, python-format msgid "" "The source drive selected has partitions which are not constrained to the " "drive /dev/%s.\n" "\n" "These partitions will have to be removed or restricted to this drive before " "this drive can be cloned. " msgstr "" "Die gewählte Quell-Festplatte besitzt Partitionen, die nicht zwingend auf " "der Festplatte /dev/%s enthalten sind.\n" "\n" "Diese Partitionen müssen entfernt oder auf diese Festplatte beschränkt " "werden, bevor die Festplatte geklont werden kann." #: ../iw/raid_dialog_gui.py:512 msgid "" "The source drive selected has software RAID partition(s) which are members " "of an active software RAID device.\n" "\n" "These partitions will have to be removed before this drive can be cloned." msgstr "" "Die gewählte Quell-Festplatte besitzt Software RAID Partitionen, die Teil " "eines aktiven Software RAID-Geräts sind.\n" "\n" "Vor dem Klonen müssen diese Partitionen entfernt werden." #: ../iw/raid_dialog_gui.py:525 ../iw/raid_dialog_gui.py:531 #: ../iw/raid_dialog_gui.py:544 msgid "Target Drive Error" msgstr "Zielfestplatten-Fehler" #: ../iw/raid_dialog_gui.py:526 msgid "Please select the target drives for the clone operation." msgstr "Wählen Sie die Ziel-Festplatten für das Klonen." #: ../iw/raid_dialog_gui.py:532 #, python-format msgid "The source drive /dev/%s cannot be selected as a target drive as well." msgstr "Die Quell-Festplatte /dev/%s kann nicht als Ziel-Festplatte gewählt werden." #: ../iw/raid_dialog_gui.py:545 #, python-format msgid "" "The target drive /dev/%s has a partition which cannot be removed for the " "following reason:\n" "\n" "\"%s\"\n" "\n" "This partition must be removed before this drive can be a target." msgstr "" "Die Ziel-Festplatte /dev/%s besitzt eine Partition, die aus folgendem Grund " "nicht entfernt werden kann:\n" "\n" "\"%s\"\n" "\n" "Bevor diese Festplatte als Ziel-Festplatte verwendet werden kann, muss diese " "Partition entfernt werden." #: ../iw/raid_dialog_gui.py:606 msgid "Please select a source drive." msgstr "Wählen Sie eine Quell-Festplatte." #: ../iw/raid_dialog_gui.py:626 #, python-format msgid "" "The drive /dev/%s will now be cloned to the following drives:\n" "\n" msgstr "" "Die Festplatte /dev/%s wird auf die folgenden Festplatten geklont:\n" "\n" #: ../iw/raid_dialog_gui.py:631 msgid "" "\n" "\n" "WARNING! ALL DATA ON THE TARGET DRIVES WILL BE DESTROYED." msgstr "" "\n" "\n" "ACHTUNG! ALLE DATEN DER ZIEL-FESTPLATTEN WERDEN GELÖSCHT." #: ../iw/raid_dialog_gui.py:634 msgid "Final Warning" msgstr "Letzte Warnung" #: ../iw/raid_dialog_gui.py:636 msgid "Clone Drives" msgstr "Festplatten klonen" #: ../iw/raid_dialog_gui.py:645 msgid "There was an error clearing the target drives. Cloning failed." msgstr "" "Beim Löschen der Ziel-Festplatten ist ein Fehler aufgetreten. Das Klonen " "wurde unterbrochen." #: ../iw/raid_dialog_gui.py:679 msgid "" "Clone Drive Tool\n" "\n" "This tool allows you to significantly reduce the amount of effort required " "to setup RAID arrays. The idea is to take a source drive which has been " "prepared with the desired partitioning layout, and clone this layout onto " "other similar sized drives. Then a RAID device can be created.\n" "\n" "NOTE: The source drive must have partitions which are restricted to be on " "that drive only, and can only contain unused software RAID partitions. " "Other partition types are not allowed.\n" "\n" "EVERYTHING on the target drive(s) will be destroyed by this process." msgstr "" "Tool für Klon-Platten\n" "\n" "Dieses Tool erleichtert das Einstellen von RAID-Arrays erheblich. Das " "Konzept dieses Werkzeugs ist es, eine entsprechend partitionierte Quell-" "Festplatte auf andere Festplatten einer ähnlichen Größe zu klonen. " "Anschließend kann ein RAID-Gerät angelegt werden.\n" "\n" "BITTE BEACHTEN: die Quell-Festplatte muss Partitionen besitzen, die " "ausschließlich auf diese Festplatte beschränkt sind, und kann nur neue " "Software RAID Partitionen enthalten. Andere Partitionstypen sind nicht " "erlaubt.\n" "\n" "ALLE DATEN der Ziel-Festplatten werden gelöscht." #: ../iw/raid_dialog_gui.py:699 msgid "Source Drive:" msgstr "Quell-Festplatte:" #: ../iw/raid_dialog_gui.py:707 msgid "Target Drive(s):" msgstr "Ziel-Festplatte/n:" #: ../iw/raid_dialog_gui.py:715 msgid "Drives" msgstr "Festplatten" #: ../iw/release_notes_viewer_gui.py:142 msgid "Release Notes" msgstr "Info zur Version (Release Notes)" #: ../iw/release_notes_viewer_gui.py:146 msgid "Unable to load file!" msgstr "Datei kann nicht geladen werden!" #: ../iw/timezone_gui.py:29 ../textw/timezone_text.py:97 msgid "Time Zone Selection" msgstr "Zeitzone auswählen" #: ../iw/timezone_gui.py:68 msgid "System clock uses _UTC" msgstr "Systemuhr verwendet _UTC" #: ../iw/timezone_gui.py:76 msgid "Please select the nearest city in your timezone:" msgstr "Wählen Sie die nächstgelegene Stadt in Ihrer Zeitzone:" #: ../iw/timezone_map_gui.py:129 msgid "_Location" msgstr "_Ort" #: ../iw/timezone_map_gui.py:131 msgid "Description" msgstr "Beschreibung" #: ../iw/upgrade_bootloader_gui.py:27 ../textw/upgrade_bootloader_text.py:72 msgid "Upgrade Boot Loader Configuration" msgstr "Bootloader-Konfiguration aktualisieren" #: ../iw/upgrade_bootloader_gui.py:68 msgid "_Update boot loader configuration" msgstr "Bootloader-Konfiguration akt_ualisieren" #: ../iw/upgrade_bootloader_gui.py:69 msgid "This will update your current boot loader." msgstr "Dadurch wird Ihr derzeitiger Bootloader aktualisiert." #: ../iw/upgrade_bootloader_gui.py:72 ../textw/upgrade_bootloader_text.py:49 #, python-format msgid "The installer has detected the %s boot loader currently installed on %s." msgstr "" "Das Installationsprogramm hat den %s Bootloader, der zur Zeit auf %s " "installiert ist, erkannt." #: ../iw/upgrade_bootloader_gui.py:76 msgid "This is the recommended option." msgstr "Dies ist die empfohlene Option." #: ../iw/upgrade_bootloader_gui.py:80 ../textw/upgrade_bootloader_text.py:57 msgid "" "The installer is unable to detect the boot loader currently in use on your " "system." msgstr "" "Das Installationsprogramm kann den zur Zeit im System verwendeten Bootloader " "nicht erkennen." #: ../iw/upgrade_bootloader_gui.py:89 msgid "_Create new boot loader configuration" msgstr "Neue Bootloader-Konfiguration ers_tellen" #: ../iw/upgrade_bootloader_gui.py:91 msgid "" "This will let you create a new boot loader configuration. If you wish to " "switch boot loaders, you should choose this." msgstr "" "Dadurch können Sie eine neue Bootloader-Konfiguration erstellen. Wenn Sie " "den Bootloader wechseln möchten, sollten Sie diese Option wählen." #: ../iw/upgrade_bootloader_gui.py:98 msgid "_Skip boot loader updating" msgstr "Aktualisieren des Bootloaders über_springen" #: ../iw/upgrade_bootloader_gui.py:99 msgid "" "This will make no changes to boot loader configuration. If you are using a " "third party boot loader, you should choose this." msgstr "" "Dies ändert Ihre Bootloader-Konfiguration nicht. Wenn Sie einen Bootloader " "eines anderen Herstellers verwenden, sollten Sie diese Option wählen. " #: ../iw/upgrade_bootloader_gui.py:111 msgid "What would you like to do?" msgstr "Was würden Sie gerne tun?" #: ../iw/upgrade_migratefs_gui.py:30 ../textw/upgrade_text.py:34 msgid "Migrate File Systems" msgstr "Dateisysteme migrieren" #: ../iw/upgrade_migratefs_gui.py:55 ../textw/upgrade_text.py:36 #, python-format msgid "" "This release of %s supports the ext3 journalling file system. It has " "several benefits over the ext2 file system traditionally shipped in %s. It " "is possible to migrate the ext2 formatted partitions to ext3 without data " "loss.\n" "\n" "Which of these partitions would you like to migrate?" msgstr "" "Diese Version von %s unterstützt das ext3 Journaling Dateisystem. Es hat " "einige Vorteile gegenüber dem ext2 Dateisystem, das bisher in %s als " "Standard verwendet wurde. ext2 formatierte Partitionen können ohne " "Datenverlust in ext3 umgewandelt werden.\n" "\n" "Welche dieser Partition möchten Sie migrieren?" #: ../iw/upgrade_swap_gui.py:31 msgid "Upgrade Swap Partition" msgstr "Swap-Partition aktualisieren" #: ../iw/upgrade_swap_gui.py:101 #, python-format msgid "" "The 2.4 kernel needs significantly more swap than older kernels, as much as " "twice as much swap space as RAM on the system. You currently have %dMB of " "swap configured, but you may create additional swap space on one of your " "file systems now." msgstr "" "Kernel 2.4 benötigt wesentlich mehr Swap-Bereich als die älteren Kernel. Es " "wird empfohlen, doppelt soviel Swap-Bereich zu haben, wie physischer " "Arbeitsspeicher im System vorhanden ist. Sie haben derzeit %d MB " "konfiguriert, können jedoch zusätzlichen Swap-Bereich in einem Ihrer " "Dateisysteme erstellen." #: ../iw/upgrade_swap_gui.py:108 #, python-format msgid "" "\n" "\n" "The installer has detected %s MB of RAM.\n" msgstr "" "\n" "\n" "Das Installationsprogramm hat %s MB RAM erkannt.\n" #: ../iw/upgrade_swap_gui.py:120 msgid "I _want to create a swap file" msgstr "Ich möchte eine S_wap-Datei erstellen" #: ../iw/upgrade_swap_gui.py:129 msgid "Select the _partition to put the swap file on:" msgstr "Wählen Sie die _Partition für die Swap-Datei:" #: ../iw/upgrade_swap_gui.py:148 ../textw/upgrade_text.py:112 msgid "Partition" msgstr "Partition" #: ../iw/upgrade_swap_gui.py:148 msgid "Free Space (MB)" msgstr "Freier Platz (MB)" #: ../iw/upgrade_swap_gui.py:166 #, python-format msgid "" "It is recommended that your swap file be at least %d MB. Please enter a " "size for the swap file:" msgstr "" "Für Ihre Swap-Datei werden mindestens %d MB empfohlen. Geben Sie die Größe " "für diese Swap-Datei an:" #: ../iw/upgrade_swap_gui.py:181 msgid "Swap file _size (MB):" msgstr "Größe der _Swap-Datei (MB):" #: ../iw/upgrade_swap_gui.py:191 msgid "I _don't want to create a swap file" msgstr "Ich möchte keine Swap-_Datei erstellen" #: ../iw/upgrade_swap_gui.py:201 msgid "" "It is stongly recommended that you create a swap file. Failure to do so " "could cause the installer to abort abnormally. Are you sure that you wish " "to continue?" msgstr "" "Es wird dringend empfohlen, eine Swap-Datei zu erstellen. Wenn Sie dies " "nicht tun, könnte es Probleme während der Installation geben. Möchten Sie " "wirklich fortfahren?" #: ../iw/upgrade_swap_gui.py:209 ../textw/upgrade_text.py:178 msgid "The swap file must be between 1 and 2000 MB in size." msgstr "Die Swap-Datei muss eine Größe zwischen 1 und 2000 MB besitzen." #: ../iw/upgrade_swap_gui.py:216 ../textw/upgrade_text.py:173 msgid "There is not enough space on the device you selected for the swap partition." msgstr "" "Auf dem Gerät, das Sie für die Swap-Partition gewählt haben, steht nicht " "genügend Platz zur Verfügung." #: ../iw/xconfig_gui.py:36 ../textw/xconfig_text.py:23 msgid "Unprobed Monitor" msgstr "Monitor nicht geprüft" #: ../iw/xconfig_gui.py:52 msgid "Customize Graphical Configuration" msgstr "Grafik-Einstellungen benutzerdefiniert konfigurieren" #: ../iw/xconfig_gui.py:252 msgid "_Color Depth:" msgstr "_Farbtiefe:" #: ../iw/xconfig_gui.py:261 ../textw/xconfig_text.py:106 msgid "256 Colors (8 Bit)" msgstr "256 Farben (8 Bit)" #: ../iw/xconfig_gui.py:262 ../textw/xconfig_text.py:107 msgid "High Color (16 Bit)" msgstr "Tausende Farben. (16 Bit)" #: ../iw/xconfig_gui.py:263 ../textw/xconfig_text.py:108 msgid "True Color (24 Bit)" msgstr "Millionen Farben (24 Bit)" #: ../iw/xconfig_gui.py:283 msgid "_Screen Resolution:" msgstr "Bildschirmauflö_sung:" #: ../iw/xconfig_gui.py:339 msgid "Please choose your default desktop environment:" msgstr "Wählen Sie Ihre Standard Desktopumgebung:" #: ../iw/xconfig_gui.py:341 msgid "Your desktop environment is:" msgstr "Ihre Desktopumgebung ist:" #: ../iw/xconfig_gui.py:356 msgid "GNO_ME" msgstr "GNO_ME" #: ../iw/xconfig_gui.py:358 msgid "_KDE" msgstr "_KDE" #: ../iw/xconfig_gui.py:389 msgid "Please choose your login type:" msgstr "Wählen Sie Ihren Login Typ:" #: ../iw/xconfig_gui.py:396 msgid "_Text" msgstr "_Text" #: ../iw/xconfig_gui.py:397 msgid "_Graphical" msgstr "_Grafisch" #: ../iw/xconfig_gui.py:414 ../textw/xconfig_text.py:416 msgid "Monitor Configuration" msgstr "Monitor konfigurieren" #: ../iw/xconfig_gui.py:439 ../textw/xconfig_text.py:467 msgid "Monitor Unspecified" msgstr "Monitor nicht angegeben" #: ../iw/xconfig_gui.py:440 ../textw/xconfig_text.py:468 msgid "" "You have not selected a monitor type. It is recommended you choose the " "closest matching model in order to have the highest possible display quality." msgstr "" "Sie haben keinen Monitor ausgewählt. Es wird empfohlen, dass sie das Model " "wählen, das ihrem am nähesten kommt, damit Ihnen die bestmögliche Anzeige-" "Qualität zur Verfügung steht. " #: ../iw/xconfig_gui.py:446 msgid "_Choose monitor type" msgstr "Monitortyp auswählen" #: ../iw/xconfig_gui.py:626 msgid "" "In most cases, the monitor can be automatically detected. If the detected " "settings are not correct for the monitor, select the right settings." msgstr "" "In den meisten Fällen kann der Monitor automatisch ermittelt werden. Wenn " "die ermittelten Einstellungen dem Montior nicht entsprechen, dann wählen Sie " "die richtigen Einstellungen." #: ../iw/xconfig_gui.py:741 ../iw/xconfig_gui.py:1104 msgid "Restore _original values" msgstr "_Ursprüngliche Werte wiederherstellen" #: ../iw/xconfig_gui.py:749 msgid "Hori_zontal Sync:" msgstr "Hori_zontalfrequenz:" #: ../iw/xconfig_gui.py:752 msgid "_Vertical Sync:" msgstr "_Vertikalfrequenz:" #: ../iw/xconfig_gui.py:759 msgid "kHz" msgstr "kHz" #: ../iw/xconfig_gui.py:762 msgid "Hz" msgstr "Hz" # ../comps/comps-master:408 #: ../iw/xconfig_gui.py:782 msgid "Graphical Interface (X) Configuration" msgstr "Konfiguration der grafischen Oberfläche (X)" #: ../iw/xconfig_gui.py:812 msgid "Unknown video card" msgstr "Unbekannte Grafikkarte" #: ../iw/xconfig_gui.py:813 #, python-format msgid "" "An error has occurred selecting the video card %s. Please report this error " "to %s." msgstr "" "Bei der Auswahl der Grafikkarte %s ist ein Fehler aufgetreten. Senden Sie " "diesen Fehler an %s." #: ../iw/xconfig_gui.py:839 ../textw/xconfig_text.py:684 msgid "Unspecified video card" msgstr "Grafikkarte wurde nicht angegeben" #: ../iw/xconfig_gui.py:840 ../textw/xconfig_text.py:685 msgid "" "You need to pick a video card before X configuration can continue. If you " "want to skip X configuration entirely choose the 'Skip X Configuration' " "button." msgstr "" "Sie müssen eine Grafikkarte auswählen, bevor mit der X-Konfiguration " "fortgefahren werden kann. Wenn Sie die gesamte X-Konfiguration überspringen " "möchten, wählen Sie die Schaltfläche 'X-Konfiguration überspringen'." #: ../iw/xconfig_gui.py:975 ../textw/xconfig_text.py:637 msgid "" "Your system will be setup to use the frame buffer driver for the X Window " "System. If you do not want to setup the X Window System, choose 'Skip X " "Configuration' below." msgstr "" "Ihr System wird zur Verwendung des Framebuffer-Treibers für das X Window " "System eingerichtet. Wenn sie das X Window System nicht einrichten wollen, " "wählen Sie 'X-Konfiguration überspringen' weiter unten." #: ../iw/xconfig_gui.py:984 msgid "" "Your video ram size can not be autodetected. Choose your video ram size " "from the choices below:" msgstr "" "Die Größe Ihres Grafikspeichers kann nicht automatisch erkannt werden. " "Wählen Sie den vorhandenen Speicher aus folgender Übersicht aus:" #: ../iw/xconfig_gui.py:991 msgid "" "In most cases, the video hardware can be automatically detected. If the " "detected settings are not correct for the hardware, select the right " "settings." msgstr "" "In den meisten Fällen wird Ihre Grafik-Hardware automatisch erkannt. Wenn " "die ermittelten Einstellungen nicht zu Ihrer Hardware passen, dann wählen " "Sie die richtigen Einstellungen." #: ../iw/xconfig_gui.py:1079 msgid "_Video card RAM: " msgstr "RAM der _Grafikkarte:" #: ../iw/xconfig_gui.py:1108 msgid "_Skip X configuration" msgstr "X-Konfiguration über_springen" #: ../iw/zfcp_gui.py:24 msgid "ZFCP Configuration" msgstr "ZFCP Konfiguration" #: ../iw/zfcp_gui.py:104 msgid "_Remove" msgstr "Entfe_rnen" #: ../iw/zfcp_gui.py:111 ../textw/zfcp_text.py:116 msgid "FCP Devices" msgstr "FCP-Geräte" #: ../iw/zfcp_gui.py:122 msgid "Add FCP device" msgstr "FCP-Gerät hinzufügen" #: ../iw/zfcp_gui.py:185 #, python-format msgid "Edit FCP device %s" msgstr "Bearbeite FCP-Gerät %s " #: ../iw/zfcp_gui.py:249 msgid "" "You're about to remove a FCP disk from your configuration. Are you sure that " "you wish to continue?" msgstr "" "Sie sind im Begriff eine FCP-Disk von Ihrer Konfiguration zu entfernen. Sind " "Sie sicher, dass Sie fortfahren möchten?" #: ../iw/zipl_gui.py:32 msgid "z/IPL Boot Loader Configuration" msgstr "z/IPL Bootloader-Konfiguration" #: ../iw/zipl_gui.py:75 msgid "The z/IPL boot loader will be installed on your system." msgstr "Der z/IPL Bootloader wird auf Ihrem System installiert." #: ../iw/zipl_gui.py:77 msgid "" "The z/IPL Boot Loader will now be installed on your system.\n" "\n" "The root partition will be the one you selected previously in the partition " "setup.\n" "\n" "The kernel used to start the machine will be the one to be installed by " "default.\n" "\n" "If you wish to make changes later after the installation feel free to change " "the /etc/zipl.conf configuration file.\n" "\n" "You can now enter any additional kernel parameters which your machine or " "your setup may require." msgstr "" "Der z/IPL Bootloader wird auf Ihrem System installiert.\n" "\n" "Die Root-Partition ist die Partition, die Sie beim Einstellen der " "Partitionen gewählt haben.\n" "\n" "Der Kernel für den Start des Rechners ist der standardmäßig installierte " "Kernel.\n" "\n" "Wenn Sie nach der Installation Änderungen vornehmen möchten, können Sie " "jederzeit die /etc/zipl.conf Konfigurationsdatei ändern.\n" "\n" "Sie können nun die zusätzlichen Kernel-Parameter eingeben, die Ihr Rechner " "oder Ihre Einstellungen eventuell benötigen." #: ../iw/zipl_gui.py:104 ../textw/zipl_text.py:60 msgid "Kernel Parameters" msgstr "Kernel-Parameter" #: ../iw/zipl_gui.py:107 ../iw/zipl_gui.py:110 msgid "Chandev Parameters" msgstr "Chandev Parameter" #: ../textw/bootdisk_text.py:24 #, python-format msgid "" "The boot diskette allows you to boot your %s system from a floppy diskette. " "A boot diskette allows you to boot your system in the event your bootloader " "configuration stops working.\n" "\n" "It is highly recommended you create a boot diskette.\n" "\n" "Would you like to create a boot diskette?" msgstr "" "Mit der Bootdiskette können Sie Ihr %s System von einer Diskette aus " "starten. Die Bootdiskette kann für das Booten Ihres Systems verwendet " "werden, wenn die Bootloader-Konfiguration nicht mehr funktioniert.\n" "\n" "Es wird strengstens empfohlen, eine Bootdiskette anzulegen.\n" "\n" "Möchten Sie eine Bootdiskette anlegen?" #: ../textw/bootdisk_text.py:31 msgid "Boot Diskette" msgstr "Bootdiskette" #: ../textw/bootloader_text.py:29 msgid "Which boot loader would you like to use?" msgstr "Welchen Bootloader möchten Sie verwenden?" #: ../textw/bootloader_text.py:39 msgid "Use GRUB Boot Loader" msgstr "Bootloader GRUB verwenden" #: ../textw/bootloader_text.py:40 msgid "No Boot Loader" msgstr "Keinen Bootloader" #: ../textw/bootloader_text.py:60 msgid "Skip Boot Loader" msgstr "Bootloader überspringen" #: ../textw/bootloader_text.py:61 msgid "" "You have elected to not install any boot loader. It is strongly recommended " "that you install a boot loader unless you have an advanced need. A boot " "loader is almost always required in order to reboot your system into Linux " "directly from the hard drive.\n" "\n" "Are you sure you want to skip boot loader installation?" msgstr "" "Sie haben sich entschieden, keinen Bootloader zu installieren. Es wird " "dringend empfohlen, einen Bootloader zu installieren, es sei denn, Sie haben " "besondere Anforderungen. Ein Bootloader ist fast immer erforderlich, um Ihr " "System direkt von der Festplatte aus in Linux zu booten.\n" "\n" "Möchten Sie die Installation des Bootloaders wirklich überspringen?" #: ../textw/bootloader_text.py:94 msgid "" "A few systems will need to pass special options to the kernel at boot time " "for the system to function properly. If you need to pass boot options to the " "kernel, enter them now. If you don't need any or aren't sure, leave this " "blank." msgstr "" "Bei einigen Systemen ist es notwendig, spezielle Optionen beim Booten an den " "Kernel zu übergeben, damit das System einwandfrei funktioniert. Falls " "Bootoptionen an den Kernel weitergeleitet werden müssen, geben Sie diese " "jetzt ein. Wenn dies nicht erforderlich ist oder Sie nicht sicher sind, " "geben Sie nichts ein." #: ../textw/bootloader_text.py:103 msgid "Force use of LBA32 (not normally required)" msgstr "Verwendung von LBA32 erzwingen (gewöhnlich nicht erforderlich)" #: ../textw/bootloader_text.py:167 msgid "Where do you want to install the boot loader?" msgstr "Wo soll der Bootloader installiert werden?" #: ../textw/bootloader_text.py:195 ../textw/bootloader_text.py:265 msgid "Boot label" msgstr "Bootkennung" #: ../textw/bootloader_text.py:199 msgid "Clear" msgstr "Löschen" #: ../textw/bootloader_text.py:207 msgid "Edit Boot Label" msgstr "Bootkennung bearbeiten" #: ../textw/bootloader_text.py:225 ../textw/bootloader_text.py:230 msgid "Invalid Boot Label" msgstr "Ungültige Bootkennung" #: ../textw/bootloader_text.py:226 msgid "Boot label may not be empty." msgstr "Die Bootkennung darf nicht leer sein." #: ../textw/bootloader_text.py:231 msgid "Boot label contains illegal characters." msgstr "Bootkennung enthält ungültige Zeichen." #: ../textw/bootloader_text.py:280 ../textw/fdisk_text.py:41 #: ../textw/partition_text.py:1441 ../textw/userauth_text.py:237 #: ../textw/zfcp_text.py:109 msgid "Edit" msgstr "Bearbeiten" #: ../textw/bootloader_text.py:284 #, python-format msgid "" "The boot manager %s uses can boot other operating systems as well. You need " "to tell me what partitions you would like to be able to boot and what label " "you want to use for each of them." msgstr "" "Der von %s verwendete Boot-Manager kann auch andere Betriebssysteme starten. " "Geben Sie an, von welchen Partitionen Sie booten möchten und welche " "Kennungen Sie diesen zuweisen möchten." #: ../textw/bootloader_text.py:298 msgid " selects button | select default boot entry | next screen>" msgstr " Button | Standard-Booteintrag | nächster Bildschirm>" #: ../textw/bootloader_text.py:398 msgid "" "A boot loader password prevents users from passing arbitrary options to the " "kernel. For highest security, we recommend setting a password, but this is " "not necessary for more casual users." msgstr "" "Durch das Bootloader-Passwort wird vermieden, dass Benutzer willkürliche " "Optionen an den Kernel übergeben. Für eine verbesserte Sicherheit empfehlen " "wir die Erstellung eines Passworts. Dies ist jedoch für Benutzer, die das " "System nur gelegentlich nutzen, nicht notwendig." #: ../textw/bootloader_text.py:408 msgid "Use a GRUB Password" msgstr "GRUB-Passwort verwenden" #: ../textw/bootloader_text.py:420 msgid "Boot Loader Password:" msgstr "Bootloader-Passwort: " #: ../textw/bootloader_text.py:421 msgid "Confirm:" msgstr "Bestätigen:" #: ../textw/bootloader_text.py:450 msgid "Passwords Do Not Match" msgstr "Die Passwörter stimmen nicht überein." #: ../textw/bootloader_text.py:455 msgid "Password Too Short" msgstr "Passwort zu kurz" #: ../textw/bootloader_text.py:456 msgid "Boot loader password is too short" msgstr "Bootloader-Passwort zu kurz" #: ../textw/complete_text.py:27 msgid "" "Press to end the installation process.\n" "\n" msgstr "" "Drücken Sie , um das System neu zu starten.\n" "\n" #: ../textw/complete_text.py:28 msgid " to exit" msgstr " zum Beenden" #: ../textw/complete_text.py:30 msgid "" "Remove any media used during the installation process and press to " "reboot your system.\n" "\n" msgstr "" "Entfernen Sie sämtliche Installationsmedien, die Sie bei der Installation " "verwendet haben, und drücken Sie , um das System neu zu starten.\n" "\n" #: ../textw/complete_text.py:33 msgid " to reboot" msgstr " zum Neustarten" #: ../textw/complete_text.py:37 #, python-format msgid "" "Congratulations, your %s installation is complete.\n" "\n" "%s%s" msgstr "" "Herzlichen Glückwunsch zur erfolgreichen Installation von %s.\n" "\n" "%s %s" #: ../textw/complete_text.py:40 #, python-format msgid "" "For information on errata (updates and bug fixes), visit http://www.redhat." "com/errata/.\n" "\n" "Information on using your system is available in the %s manuals at http://" "www.redhat.com/docs/." msgstr "" "Informationen über Errata (Updates und Bug Fixes) erhalten Sie unter http://" "www.redhat.com/errata.\n" "\n" "Informationen über die Verwendung und die Konfiguration Ihres Systems " "erhalten Sie in den %s Handbüchern unter http://www.redhat.com/docs." #: ../textw/complete_text.py:46 msgid "Complete" msgstr "Fertig" #: ../textw/complete_text.py:47 msgid "Reboot" msgstr "Neu sta_rten" #: ../textw/confirm_text.py:22 msgid "Installation to begin" msgstr "Installation beginnt" #: ../textw/confirm_text.py:23 #, python-format msgid "" "A complete log of your installation will be in %s after rebooting your " "system. You may want to keep this file for later reference." msgstr "" "Nach dem Neustart des Systems befindet sich in %s ein vollständiges " "Protokoll der Installation. Sie sollten diese Datei für Referenzzwecke " "dauerhaft speichern." #: ../textw/confirm_text.py:26 ../textw/confirm_text.py:28 #: ../textw/confirm_text.py:54 ../textw/confirm_text.py:56 #: ../textw/constants_text.py:44 ../textw/userauth_text.py:202 #: ../loader2/cdinstall.c:386 ../loader2/driverdisk.c:270 #: ../loader2/driverdisk.c:301 ../loader2/driverdisk.c:390 #: ../loader2/driverselect.c:73 ../loader2/driverselect.c:187 #: ../loader2/driverselect.c:213 ../loader2/hdinstall.c:330 #: ../loader2/hdinstall.c:384 ../loader2/kbd.c:125 ../loader2/loader.c:308 #: ../loader2/loader.c:869 ../loader2/loader.c:891 ../loader2/net.c:231 #: ../loader2/net.c:269 ../loader2/net.c:536 ../loader2/net.c:1069 #: ../loader2/nfsinstall.c:54 ../loader2/urls.c:257 ../loader2/urls.c:447 msgid "Back" msgstr "Zurück" #: ../textw/confirm_text.py:50 msgid "Upgrade to begin" msgstr "Upgrade beginnt" #: ../textw/confirm_text.py:51 #, python-format msgid "" "A complete log of your upgrade will be in %s after rebooting your system. " "You may want to keep this file for later reference." msgstr "" "Ein komplettes Protokoll mit Angaben zu Ihrem Upgrade steht Ihnen nach dem " "Neustart Ihres Systems in %s zur Verfügung. Sie sollten diese Datei für " "Referenzzwecke dauerhaft speichern." #: ../textw/desktop_choice_text.py:27 #, python-format msgid "" "The default installation environment includes our recommended package " "selection. After installation, additional software can be added or removed " "using the 'system-config-packages' tool.\n" "\n" "However %s ships with many more applications, and you may customize the " "selection of software installed if you want." msgstr "" "Die Standard-Installations-Umgebung enthält unsere empfohlene Paket-Auswahl. " "Nach der Installation kann mit Hilfe des Programms 'system-config-packages' " "weitere Software hinzugefügt oder auch entfernt werden.\n" "\n" "%s wird jedoch mit einer großen Anzahl an weiteren Applikationen " "ausgeliefert, und Sie können zu installierende Software benutzerdefiniert " "auswählen." #: ../textw/desktop_choice_text.py:37 msgid "Customize software selection" msgstr "Software-Auswahl benutzerdefiniert einstellen" #: ../textw/fdasd_text.py:31 msgid "Choose a disk to run fdasd or dasdfmt on" msgstr "Wählen Sie eine Festplatte, auf der fdisk oder dasdfmt ausgeführt wird" #: ../textw/fdasd_text.py:32 msgid "Next" msgstr "Weiter" #: ../textw/fdasd_text.py:32 msgid "Edit Partitions" msgstr "Partitionen bearbeiten" #: ../textw/fdasd_text.py:33 msgid "Format DASD" msgstr "DASD formatieren" #: ../textw/fdasd_text.py:50 ../textw/fdisk_text.py:39 msgid "Disk Setup" msgstr "Festplatte einrichten" #: ../textw/fdasd_text.py:74 #, python-format msgid "An error occurred while running %s on drive %s." msgstr "Beim Ausführen von %s auf Festplatte %s ist ein Fehler aufgetreten." #: ../textw/fdasd_text.py:85 #, python-format msgid "" "Running dasdfmt means the loss of \n" "ALL DATA on drive %s.\n" "\n" "Do you really want this?" msgstr "" "Das Ausführen von dasdfmt bewirkt den Verlust\n" "ALLER DATEN auf Festplatte %s.\n" "\n" "Möchten Sie dies wirklich?" #: ../textw/fdasd_text.py:101 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem or use " "dasdfmt.\n" "\n" "Back to the fdasd screen?" msgstr "" "Ein Fehler ist aufgetreten - es wurden keine gültigen Geräte gefunden, um " "darauf neue Dateisysteme zu erstellen. Überprüfen Sie Ihre Hardware oder " "verwenden Sie dasdfmt.\n" "\n" "Möchten Sie zum Bildschirm fdasd zurückkehren?" #: ../textw/fdisk_text.py:40 msgid "Choose a disk to run fdisk on" msgstr "Wählen Sie ein Laufwerk, auf dem fdisk ausgeführt wird" #: ../textw/firewall_text.py:27 msgid "Customize" msgstr "Benutzerdefiniert" #: ../textw/firewall_text.py:44 msgid "Enable firewall" msgstr "Firewall aktivieren" #: ../textw/firewall_text.py:47 msgid "No firewall" msgstr "Keine Firewall" #: ../textw/firewall_text.py:54 msgid "Allow incoming:" msgstr "Eingang ermöglichen:" #: ../textw/firewall_text.py:86 msgid "Invalid Choice" msgstr "Ungültige Wahl" #: ../textw/firewall_text.py:87 msgid "You cannot customize a disabled firewall." msgstr "Eine deaktivierte Firewall kann nicht benutzerdefiniert konfiguriert werden." #: ../textw/firewall_text.py:92 msgid "Customize Firewall Configuration" msgstr "Firewall individuell einrichten" #: ../textw/firewall_text.py:94 msgid "" "With a firewall, you may wish to allow access to specific services on your " "computer from others. Allow access to which services?" msgstr "" "Bei einer Firewall können Sie einzelne Dienste auf Ihrem Rechner von aussen " "erreichbar machen. Welche Dienste möchten Sie entsprechend freischalten?" #: ../textw/firewall_text.py:159 msgid "Security Enhanced Linux" msgstr "Security Enhanced Linux" #: ../textw/installpath_text.py:49 msgid "What type of system would you like to install?" msgstr "Welchen Systemtyp möchten Sie installieren?" #: ../textw/keyboard_text.py:36 msgid "Keyboard Selection" msgstr "Auswahl der Tastatur" #: ../textw/keyboard_text.py:37 msgid "Which model keyboard is attached to this computer?" msgstr "Welcher Tastaturtyp ist an Ihren Computer angeschlossen?" #: ../textw/mouse_text.py:39 msgid "What device is your mouse located on?" msgstr "An welches Gerät ist Ihre Maus angeschlossen?" #: ../textw/mouse_text.py:71 msgid "Which model mouse is attached to this computer?" msgstr "Welcher Maustyp ist an Ihren Computer angeschlossen?" #: ../textw/mouse_text.py:82 msgid "Emulate 3 Buttons?" msgstr "Drei Tasten emulieren?" #: ../textw/mouse_text.py:85 msgid "Mouse Selection" msgstr "Maus auswählen" #: ../textw/network_text.py:30 msgid "Invalid IP string" msgstr "Ungültige IP-Angaben" #: ../textw/network_text.py:31 #, python-format msgid "The entered IP '%s' is not a valid IP." msgstr "Die eingegebene IP '%s' ist keine gültige IP-Adresse." #: ../textw/network_text.py:68 msgid "IP Address" msgstr "IP-Adresse" #: ../textw/network_text.py:69 msgid "Netmask" msgstr "Netzmaske" #: ../textw/network_text.py:71 msgid "Point to Point (IP)" msgstr "Punkt zu Punkt (IP)" #: ../textw/network_text.py:75 ../loader2/net.c:226 msgid "ESSID" msgstr "ESSID" #: ../textw/network_text.py:76 ../loader2/net.c:227 msgid "Encryption Key" msgstr "Kryptoschlüssel" #: ../textw/network_text.py:88 #, python-format msgid "Network Device: %s" msgstr "Netzwerkgerät: %s" #: ../textw/network_text.py:94 #, python-format msgid "Description: %s" msgstr "Beschreibung: %s" #: ../textw/network_text.py:98 #, python-format msgid "Hardware Address: %s" msgstr "Hardware Addresse: %s" #: ../textw/network_text.py:103 msgid "Configure using DHCP" msgstr "Mittels _DHCP konfigurieren" #: ../textw/network_text.py:116 msgid "Activate on boot" msgstr "Beim Starten aktivieren" #: ../textw/network_text.py:142 #, python-format msgid "Network Configuration for %s" msgstr "Netzwerkkonfiguration für %s" #: ../textw/network_text.py:175 msgid "Invalid information" msgstr "Ungültige Angaben" #: ../textw/network_text.py:176 msgid "You must enter valid IP information to continue" msgstr "Zum Fortfahren müssen Sie gültige IP-Angaben eintragen." #: ../textw/network_text.py:260 msgid "Gateway:" msgstr "Gateway:" #: ../textw/network_text.py:270 msgid "Primary DNS:" msgstr "Primärer DNS:" #: ../textw/network_text.py:275 msgid "Secondary DNS:" msgstr "Sekundärer DNS:" #: ../textw/network_text.py:280 msgid "Tertiary DNS:" msgstr "Tertiärer DNS:" #: ../textw/network_text.py:287 msgid "Miscellaneous Network Settings" msgstr "Verschiedene Netzwerk-Einstellungen" #: ../textw/network_text.py:355 msgid "automatically via DHCP" msgstr "automatisch über DHCP" #: ../textw/network_text.py:359 msgid "manually" msgstr "manuell" #: ../textw/network_text.py:378 msgid "Hostname Configuration" msgstr "Konfiguration des Rechnernamens" #: ../textw/network_text.py:381 msgid "" "If your system is part of a larger network where hostnames are assigned by " "DHCP, select automatically via DHCP. Otherwise, select manually and enter in " "a hostname for your system. If you do not, your system will be known as " "'localhost.'" msgstr "" "Sollte Ihr System Teil eines größeren Netzwerks sein, in dem Rechnernamen " "durch DHCP vergeben werden, wählen Sie 'automatisch über DHCP'. Ansonsten, " "wählen Sie 'manuell' und geben Sie den Rechnernamen für Ihr System ein. " "Sollten Sie dies nicht tun, wird Ihr System 'localhost' heißen." #: ../textw/network_text.py:407 ../textw/network_text.py:413 msgid "Invalid Hostname" msgstr "Ungültiger Rechnername" #: ../textw/network_text.py:408 msgid "You have not specified a hostname." msgstr "Sie haben keinen Rechnernamen angegeben." #: ../textw/packages_text.py:56 msgid "Select individual packages" msgstr "Einzelne Pakete auswählen" #: ../textw/packages_text.py:73 msgid ",<+>,<-> selection | Group Details | next screen" msgstr ",<+>,<-> Auswahl | Gruppendetails | nächste Seite" #: ../textw/packages_text.py:119 msgid "Package Group Details" msgstr "Details der Paketgruppen" #: ../textw/packages_text.py:174 msgid "Package :" msgstr "Paket :" #: ../textw/packages_text.py:179 msgid "Size :" msgstr "Größe :" #: ../textw/packages_text.py:180 #, python-format msgid "%.1f KBytes" msgstr "%.1f KBytes" #: ../textw/packages_text.py:199 msgid "Total size" msgstr "Gesamtgröße" #: ../textw/packages_text.py:328 msgid " ,<+>,<-> selection | help | package description" msgstr " ,<+>,<-> Auswahl | Hilfe | Paketbeschreibung" #: ../textw/packages_text.py:376 msgid "Package Dependencies" msgstr "Paketabhängigkeiten" #: ../textw/packages_text.py:378 msgid "" "Some of the packages you have selected to install require packages you have " "not selected. If you just select OK all of those required packages will be " "installed." msgstr "" "Für einige der zur Installation ausgewählten Pakete sind weitere Pakete " "erforderlich, die Sie nicht ausgewählt haben. Wenn Sie OK wählen, werden " "diese zusätzlich benötigten Pakete installiert." #: ../textw/packages_text.py:399 msgid "Install packages to satisfy dependencies" msgstr "Installiere Pakete, um Abhängigkeiten zu erfüllen" #: ../textw/packages_text.py:400 msgid "Do not install packages that have dependencies" msgstr "Keine Pakete mit Abhängigkeiten installieren" #: ../textw/packages_text.py:401 msgid "Ignore package dependencies" msgstr "Paketabhängigkeiten ignorieren" #: ../textw/partition_text.py:40 msgid "Must specify a value" msgstr "Sie müssen einen Wert angeben" #: ../textw/partition_text.py:43 msgid "Requested value is not an integer" msgstr "Der eingegebene Wert ist keine ganze Zahl" #: ../textw/partition_text.py:45 msgid "Requested value is too large" msgstr "Der eingegebene Wert ist zu groß" #: ../textw/partition_text.py:99 #, python-format msgid "RAID Device %s" msgstr "RAID-Gerät %s" #: ../textw/partition_text.py:229 #, python-format msgid "Warning: %s" msgstr "Warnung: %s" #: ../textw/partition_text.py:230 msgid "Modify Partition" msgstr "Partition modifizieren" #: ../textw/partition_text.py:230 msgid "Add anyway" msgstr "Trotzdem hinzufügen" #: ../textw/partition_text.py:268 msgid "Mount Point:" msgstr "Einhängepunkt:" #: ../textw/partition_text.py:320 msgid "File System type:" msgstr "Dateisystemtyp:" #: ../textw/partition_text.py:354 msgid "Allowable Drives:" msgstr "Verfügbare Festplatten:" #: ../textw/partition_text.py:410 msgid "Fixed Size:" msgstr "Feste Größe:" #: ../textw/partition_text.py:412 msgid "Fill maximum size of (MB):" msgstr "Größe maximal ausfüllen bis (MB):" #: ../textw/partition_text.py:416 msgid "Fill all available space:" msgstr "Den gesamten verfügbaren Platz ausfüllen:" #: ../textw/partition_text.py:439 msgid "Start Cylinder:" msgstr "Start-Zylinder:" #: ../textw/partition_text.py:452 msgid "End Cylinder:" msgstr "End-Zylinder:" #: ../textw/partition_text.py:475 msgid "Volume Group:" msgstr "Volume Group:" #: ../textw/partition_text.py:497 msgid "RAID Level:" msgstr "RAID-Level:" #: ../textw/partition_text.py:515 msgid "RAID Members:" msgstr "RAID-Bestandteile:" #: ../textw/partition_text.py:534 msgid "Number of spares?" msgstr "Anzahl der Spare-Geräte?" #: ../textw/partition_text.py:548 msgid "File System Type:" msgstr "Dateisystemtyp:" #: ../textw/partition_text.py:561 msgid "File System Label:" msgstr "Dateisystemkennung:" #: ../textw/partition_text.py:572 msgid "File System Option:" msgstr "Dateisystem-Option:" #: ../textw/partition_text.py:575 ../textw/partition_text.py:813 #: ../textw/partition_text.py:1050 ../textw/partition_text.py:1220 #, python-format msgid "Format as %s" msgstr "Als %s formatieren" #: ../textw/partition_text.py:577 ../textw/partition_text.py:815 #: ../textw/partition_text.py:1052 ../textw/partition_text.py:1222 #, python-format msgid "Migrate to %s" msgstr "Auf %s migrieren" #: ../textw/partition_text.py:579 ../textw/partition_text.py:817 #: ../textw/partition_text.py:1054 ../textw/partition_text.py:1224 msgid "Leave unchanged" msgstr "Unverändert lassen" #: ../textw/partition_text.py:595 ../textw/partition_text.py:790 #: ../textw/partition_text.py:1030 ../textw/partition_text.py:1200 msgid "File System Options" msgstr "Dateisystem-Optionen" #: ../textw/partition_text.py:598 msgid "" "Please choose how you would like to prepare the file system on this " "partition." msgstr "Wählen Sie aus, wie Sie das Dateisystem auf dieser Partition anlegen möchten." #: ../textw/partition_text.py:606 msgid "Check for bad blocks" msgstr "Auf defekte Blöcke überprüfen" #: ../textw/partition_text.py:610 msgid "Leave unchanged (preserve data)" msgstr "Bleibt unverändert (Datenerhalt)" #: ../textw/partition_text.py:619 msgid "Format as:" msgstr "Formatieren als:" #: ../textw/partition_text.py:639 msgid "Migrate to:" msgstr "Migrieren auf:" #: ../textw/partition_text.py:751 msgid "Force to be a primary partition" msgstr "Als primäre Partition forcieren" #: ../textw/partition_text.py:768 msgid "Not Supported" msgstr "Nicht unterstützt" #: ../textw/partition_text.py:769 msgid "LVM Volume Groups can only be edited in the graphical installer." msgstr "" "Ein LVM Datenträgerverbund (Volume Group) kann nur in der grafischen " "Installation bearbeitet werden." #: ../textw/partition_text.py:845 ../textw/partition_text.py:898 msgid "Invalid Entry for Partition Size" msgstr "Ungültige Angaben für Partitionsgröße" #: ../textw/partition_text.py:857 msgid "Invalid Entry for Maximum Size" msgstr "Eingegebener Wert für maximale Größe nicht gültig" #: ../textw/partition_text.py:876 msgid "Invalid Entry for Starting Cylinder" msgstr "Ungültige Angaben für den Start-Zylinder" #: ../textw/partition_text.py:890 msgid "Invalid Entry for End Cylinder" msgstr "Ungültige Angaben für den End-Zylinder" #: ../textw/partition_text.py:1003 msgid "No RAID partitions" msgstr "Keine RAID-Partitionen" #: ../textw/partition_text.py:1004 msgid "At least two software RAID partitions are needed." msgstr "Mindestens zwei Software-RAID-Partitionen sind erforderlich." #: ../textw/partition_text.py:1016 ../textw/partition_text.py:1187 msgid "Format partition?" msgstr "Partition formatieren?" #: ../textw/partition_text.py:1078 msgid "Invalid Entry for RAID Spares" msgstr "Ungültige Eingaben für RAID Spares" #: ../textw/partition_text.py:1091 msgid "Too many spares" msgstr "Zu viele Spare-Geräte" #: ../textw/partition_text.py:1092 msgid "The maximum number of spares with a RAID0 array is 0." msgstr "Die maximale Anzahl von Spare-Geräten bei RAID0 ist 0." #: ../textw/partition_text.py:1173 msgid "No Volume Groups" msgstr "Kein Datenträgerverbund (Volume Group)" #: ../textw/partition_text.py:1174 msgid "No volume groups in which to create a logical volume" msgstr "" "Kein Datenträgerverbund (Volume Group), um darin einen logischen Datenträger " "(Logical Volume) zu erstellen." #: ../textw/partition_text.py:1290 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than maximum logical volume " "size (%10.2f MB). " msgstr "" "Die derzeit erforderliche Größe (%10.2f MB) ist größer als die maximale " "Größe des logischen Datenträgers (Logical Volume) (%10.2f MB). " #: ../textw/partition_text.py:1309 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than the available size in " "the volume group (%10.2f MB)." msgstr "" "Die derzeit erforderliche Größe (%10.2f MB) ist größer als die maximale " "Größe im Datenträgerverbund (Volume Group) (%10.2f MB). " #: ../textw/partition_text.py:1363 msgid "New Partition or Logical Volume?" msgstr "Neue Partition oder Logical Volume?" #: ../textw/partition_text.py:1364 msgid "Would you like to create a new partition or a new logical volume?" msgstr "" "Möchten Sie eine neue Partition oder eine neuen logischen Datenträger " "(Logical Volume) erstellen?" #: ../textw/partition_text.py:1366 msgid "partition" msgstr "Partition" #: ../textw/partition_text.py:1366 msgid "logical volume" msgstr "Logical Volume" #: ../textw/partition_text.py:1440 msgid "New" msgstr "Neu" #: ../textw/partition_text.py:1442 ../textw/userauth_text.py:236 msgid "Delete" msgstr "Löschen" #: ../textw/partition_text.py:1443 msgid "RAID" msgstr "RAID" #: ../textw/partition_text.py:1446 msgid " F1-Help F2-New F3-Edit F4-Delete F5-Reset F12-OK " msgstr " F1-Hilfe F2-Neu F3-Bearbeiten F4-Löschen F5-Zurücksetzen F12-OK" #: ../textw/partition_text.py:1475 msgid "No Root Partition" msgstr "Keine Root-Partition" #: ../textw/partition_text.py:1476 msgid "Must have a / partition to install on." msgstr "Sie müssen eine / Partition haben, auf der Sie installieren können." #: ../textw/partition_text.py:1543 msgid "Which drive(s) do you want to use for this installation?" msgstr "Welche Festplatte/n möchten Sie für diese Installation verwenden?" #: ../textw/partmethod_text.py:26 msgid "Autopartition" msgstr "Automatisches Partitionieren" #: ../textw/partmethod_text.py:27 msgid "Disk Druid" msgstr "Disk Druid" #: ../textw/progress_text.py:65 #, python-format msgid "Downloading - %s" msgstr "Herunterladen - %s" #: ../textw/progress_text.py:98 msgid "Package Installation" msgstr "Installation von Paketen" #: ../textw/progress_text.py:100 msgid " Name : " msgstr " Name : " #: ../textw/progress_text.py:101 msgid " Size : " msgstr " Größe : " #: ../textw/progress_text.py:102 msgid " Summary: " msgstr " Zusammenfassung: " #: ../textw/progress_text.py:147 msgid " Packages" msgstr " Pakete" #: ../textw/progress_text.py:148 msgid " Bytes" msgstr " Bytes" #: ../textw/progress_text.py:149 msgid " Time" msgstr " Zeit" #: ../textw/progress_text.py:151 msgid "Total :" msgstr "Gesamt :" #: ../textw/progress_text.py:158 msgid "Completed: " msgstr "Abgeschlossen: " #: ../textw/progress_text.py:168 msgid "Remaining: " msgstr "Verbleibend: " #: ../textw/timezone_text.py:79 msgid "What time zone are you located in?" msgstr "In welcher Zeitzone befinden Sie sich?" #: ../textw/timezone_text.py:94 msgid "System clock uses UTC" msgstr "Systemuhr verwendet UTC" #: ../textw/upgrade_bootloader_text.py:53 #: ../textw/upgrade_bootloader_text.py:60 msgid "Update boot loader configuration" msgstr "Aktualisiert Bootloader-Konfiguration" #: ../textw/upgrade_bootloader_text.py:64 msgid "Skip boot loader updating" msgstr "Aktualisieren des Bootloaders überspringen" #: ../textw/upgrade_bootloader_text.py:66 msgid "Create new boot loader configuration" msgstr "Neue Bootloader-Konfiguration erstellen" #: ../textw/upgrade_text.py:94 #, python-format msgid "" "The 2.4 kernel needs significantly more swap than older kernels, as much as " "twice as much swap space as RAM on the system. You currently have %dMB of " "swap configured, but you may create additional swap space on one of your " "file systems now." msgstr "" "Der Kernel 2.4 benötigt wesentlich mehr Swap-Bereich als die älteren Kernel, " "zumindest doppelt so viel Swap-Bereich wie RAM im System vorhanden ist. Sie " "haben derzeit %dMB konfiguriert, können jedoch zusätzlichen Swap-Bereich in " "einem Ihrer Dateisysteme erstellen." #: ../textw/upgrade_text.py:112 msgid "Free Space" msgstr "Freier Platz" #: ../textw/upgrade_text.py:127 msgid "RAM detected (MB):" msgstr "Erkannter RAM (MB):" #: ../textw/upgrade_text.py:130 msgid "Suggested size (MB):" msgstr "Empfohlene Größe (MB):" #: ../textw/upgrade_text.py:133 msgid "Swap file size (MB):" msgstr "Größe der Swap-Datei (MB):" #: ../textw/upgrade_text.py:141 msgid "Add Swap" msgstr "Swap hinzufügen" #: ../textw/upgrade_text.py:166 msgid "The value you entered is not a valid number." msgstr "Der eingegebene Wert ist keine gültige Zahl." #: ../textw/upgrade_text.py:199 msgid "Reinstall System" msgstr "System neu installieren" #: ../textw/upgrade_text.py:208 msgid "System to Upgrade" msgstr "Zu aktualisierendes System" #: ../textw/upgrade_text.py:209 msgid "" "One or more existing Linux installations have been found on your system.\n" "\n" "Please choose one to upgrade, or select 'Reinstall System' to freshly " "install your system." msgstr "" "Eine oder mehrere Linux Installationen wurden auf Ihrem System gefunden.\n" "\n" "Bitte wählen Sie eine zur Aktualisierung, oder wählen Sie 'System neu " "installieren', um Ihr System neu zu installieren." #: ../textw/upgrade_text.py:246 msgid "Customize Packages to Upgrade" msgstr "Zu aktualisierende Pakete benutzerdefiniert konfigurieren" #: ../textw/upgrade_text.py:247 msgid "" "The packages you have installed, and any other packages which are needed to " "satisfy their dependencies, have been selected for installation. Would you " "like to customize the set of packages that will be upgraded?" msgstr "" "Die Pakete, die Sie installiert haben, sowie sämtliche Pakete, die zur " "Erfüllung von Abhängigkeiten benötigt werden, wurden für die Installation " "ausgewählt. Möchten Sie die Pakete, die für die Aktualisierung vorgesehen " "sind, benutzerdefiniert konfigurieren? " #: ../textw/userauth_text.py:29 msgid "Root Password" msgstr "Root-Passwort" #: ../textw/userauth_text.py:31 msgid "" "Pick a root password. You must type it twice to ensure you know what it is " "and didn't make a mistake in typing. Remember that the root password is a " "critical part of system security!" msgstr "" "Wählen Sie ein Root-Passwort aus. Sie müssen es zwei Mal eingeben, um " "sicherzustellen, dass Sie bei der Eingabe keinen Fehler gemacht haben. " "Beachten Sie, dass das Root-Passwort einen kritischen Bestandteil der " "Systemsicherheit darstellt!" #: ../textw/userauth_text.py:62 msgid "The root password must be at least 6 characters long." msgstr "Das Root-Passwort muss aus mindestens 6 Zeichen bestehen." #: ../textw/userauth_text.py:102 msgid "Edit User" msgstr "Benutzer bearbeiten" #: ../textw/userauth_text.py:105 msgid "Add User" msgstr "Benutzer hinzufügen" #: ../textw/userauth_text.py:110 msgid "User Name" msgstr "Benutzername" #: ../textw/userauth_text.py:111 msgid "Password" msgstr "Passwort" #: ../textw/userauth_text.py:112 msgid "Password (confirm)" msgstr "Passwort (bestätigen)" #: ../textw/userauth_text.py:113 ../textw/userauth_text.py:222 msgid "Full Name" msgstr "Vollständiger Name" #: ../textw/userauth_text.py:125 msgid "Bad User Name" msgstr "Falscher Benutzername" #: ../textw/userauth_text.py:126 msgid "User names must contain only characters A-Z, a-z, and 0-9." msgstr "Benutzernamen dürfen nur die Zeichen A-Z, a-z und 0-9 enthalten." #: ../textw/userauth_text.py:133 msgid "Missing User Name" msgstr "Benutzername fehlt" #: ../textw/userauth_text.py:134 msgid "You must provide a user name" msgstr "Sie müssen einen Benutzernamen angeben." #: ../textw/userauth_text.py:139 msgid "The password must be at least 6 characters long." msgstr "Das Passwort muss aus mindestens 6 Zeichen bestehen." #: ../textw/userauth_text.py:155 ../textw/userauth_text.py:162 #: ../textw/userauth_text.py:170 msgid "User Exists" msgstr "Benutzer existiert bereits" #: ../textw/userauth_text.py:156 msgid "The root user is already configured. You don't need to add this user here." msgstr "" "Der Root-Benutzer wurde bereits konfiguriert. Sie müssen diesen Benutzer " "hier nicht hinzufügen." #: ../textw/userauth_text.py:163 msgid "This system user is already configured. You don't need to add this user here." msgstr "" "Der Systembenutzer wurde bereits konfiguriert. Sie müssen diesen Benutzer " "hier nicht hinzufügen." #: ../textw/userauth_text.py:171 msgid "This user id already exists. Choose another." msgstr "" "Diese Benutzerkennung existiert bereits. Wählen Sie eine andere " "Benutzerkennung aus." #: ../textw/userauth_text.py:198 msgid "" "You should use a normal user account for most activities on your system. By " "not using the root account casually, you'll reduce the chance of disrupting " "your system's configuration." msgstr "" "Für das Arbeiten mit Ihrem System empfiehlt sich meist die Verwendung eines " "normalen Benutzeraccounts. Wenn Sie sich nicht als Root angemelden, " "verringert sich die Gefahr einer Beschädigung der Systemkonfiguration." #: ../textw/userauth_text.py:209 msgid "User Account Setup" msgstr "Benutzeraccount einrichten" #: ../textw/userauth_text.py:211 msgid "" "What other user accounts would you like to have on the system? You should " "have at least one non-root account for normal work, but multi-user systems " "can have any number of accounts set up." msgstr "" "Welche Benutzeraccounts möchten Sie für das System einrichten? Sie sollten " "für das normale Arbeiten mit dem System über mindestens einen " "Benutzeraccount ohne Root-Privilegien verfügen. Bei Systemen für mehrere " "Benutzer können Sie eine beliebige Anzahl von Accounts einrichten." #: ../textw/userauth_text.py:222 msgid "User name" msgstr "Benutzername" #: ../textw/userauth_text.py:236 ../textw/zfcp_text.py:108 msgid "Add" msgstr "Hinzufügen" #: ../textw/userauth_text.py:249 msgid "Enter the information for the user." msgstr "Informationen für den Benutzer eingeben." #: ../textw/userauth_text.py:267 msgid "Change the information for this user." msgstr "Informationen für diesen Benutzer ändern." #: ../textw/userauth_text.py:339 msgid "Use Shadow Passwords" msgstr "Shadow-Passwörter verwenden" #: ../textw/userauth_text.py:341 msgid "Enable MD5 Passwords" msgstr "MD5-Passwörter aktivieren" #: ../textw/userauth_text.py:346 msgid "Enable NIS" msgstr "NIS aktivieren" #: ../textw/userauth_text.py:352 msgid "NIS Domain:" msgstr "NIS-Domäne:" #: ../textw/userauth_text.py:354 msgid "NIS Server:" msgstr "NIS-Server:" #: ../textw/userauth_text.py:356 msgid "or use:" msgstr "oder benutzen Sie:" #: ../textw/userauth_text.py:359 msgid "Request server via broadcast" msgstr "Server über Broadcast anfordern" #: ../textw/userauth_text.py:380 msgid "Enable LDAP" msgstr "LDAP aktivieren" #: ../textw/userauth_text.py:386 msgid "LDAP Server:" msgstr "LDAP-Server:" #: ../textw/userauth_text.py:388 msgid "LDAP Base DN:" msgstr "LDAP-Basis-DN:" #: ../textw/userauth_text.py:398 msgid "Use TLS connections" msgstr "TLS-Verschlüsselung aktivieren" #: ../textw/userauth_text.py:409 msgid "Enable Kerberos" msgstr "Kerberos aktivieren" #: ../textw/userauth_text.py:416 msgid "Realm:" msgstr "Realm:" #: ../textw/userauth_text.py:418 msgid "KDC:" msgstr "KDC:" #: ../textw/userauth_text.py:420 msgid "Admin Server:" msgstr "Admin-Server:" #: ../textw/welcome_text.py:22 #, python-format msgid "%s" msgstr "%s" #: ../textw/welcome_text.py:23 #, python-format msgid "" "Welcome to %s!\n" "\n" msgstr "" "Willkommen bei %s!\n" "\n" #: ../textw/xconfig_text.py:35 msgid "Color Depth" msgstr "Farbtiefe" #: ../textw/xconfig_text.py:36 msgid "Please select the color depth you would like to use:" msgstr "Wählen Sie die Farbtiefe, die Sie verwenden möchten:" #: ../textw/xconfig_text.py:59 msgid "Resolution" msgstr "Bildschirmauflösung" #: ../textw/xconfig_text.py:60 msgid "Please select the resolution you would like to use:" msgstr "Wählen Sie die Bildschirmauflösung, die Sie verwenden möchten:" #: ../textw/xconfig_text.py:131 msgid "X Customization" msgstr "X-Anpassung" #: ../textw/xconfig_text.py:134 msgid "Select the color depth and video mode you want to use for your system. " msgstr "" "Wählen Sie die Farbtiefe und den Grafikmodus, den Sie für Ihr System " "verwenden möchten." #: ../textw/xconfig_text.py:138 msgid "Color Depth:" msgstr "Farbtiefe:" #: ../textw/xconfig_text.py:142 ../textw/xconfig_text.py:149 #: ../textw/xconfig_text.py:427 ../textw/xconfig_text.py:438 #: ../textw/xconfig_text.py:657 ../textw/xconfig_text.py:664 msgid "Change" msgstr "Ändern" #: ../textw/xconfig_text.py:145 msgid "Resolution:" msgstr "Bildschirmauflösung:" #: ../textw/xconfig_text.py:155 msgid "Default Desktop:" msgstr "Standard Desktop:" #: ../textw/xconfig_text.py:159 ../textw/xconfig_text.py:168 msgid "GNOME" msgstr "GNOME" #: ../textw/xconfig_text.py:161 ../textw/xconfig_text.py:170 msgid "KDE" msgstr "KDE" #: ../textw/xconfig_text.py:176 msgid "Default Login:" msgstr "Standardmäßige Anmeldung:" #: ../textw/xconfig_text.py:178 msgid "Graphical" msgstr "Grafik" #: ../textw/xconfig_text.py:180 msgid "Text" msgstr "Text" #: ../textw/xconfig_text.py:228 msgid "Monitor" msgstr "Monitor" #: ../textw/xconfig_text.py:229 msgid "Please select the monitor attached to your system." msgstr "Wählen Sie den Monitor aus, der mit Ihrem System verbunden ist." #: ../textw/xconfig_text.py:254 msgid "horizontal" msgstr "horizontal" #: ../textw/xconfig_text.py:257 msgid "vertical" msgstr "vertikal" #: ../textw/xconfig_text.py:261 msgid "Invalid Sync Rates" msgstr "Ungültige Frequenz" #: ../textw/xconfig_text.py:262 #, python-format msgid "" "The %s sync rate is invalid:\n" "\n" " %s\n" "\n" "A valid sync rate can be of the form:\n" "\n" " 31.5 a single number\n" " 50.1-90.2 a range of numbers\n" "31.5,35.0,39.3-40.0 a list of numbers/ranges\n" msgstr "" "Die Frequenz %s ist ungültig:\n" "\n" " %s\n" "\n" "Ein gültiger Frequenzbereich ist:\n" "\n" " 31.5 eine einzelne Zahl\n" " 50.1-90.2 eine Bereich von Zahlen\n" "31.5,35.0,39.3-40.0 eine Auflistung von Zahlen und Bereichen\n" #: ../textw/xconfig_text.py:276 msgid "Monitor Sync Rates" msgstr "Bildschirmfrequenzbereiche" #: ../textw/xconfig_text.py:281 msgid "" "Please enter the sync rates for your monitor. \n" "\n" "NOTE - it is not usually necessary to edit sync rates manually, and care " "should be taken to make sure the values entered are accurate." msgstr "" "Geben Sie die Frequenzbereiche für Ihren Bildschirm ein. \n" "\n" "BITTE BEACHTEN - normalerweise ist es nicht notwendig, die Frequenzbereiche " "manuell einzugeben. Überprüfen Sie, dass die eingegebenen Werte korrekt sind." #: ../textw/xconfig_text.py:286 msgid "HSync Rate: " msgstr "Horizontalfrequenz: " #: ../textw/xconfig_text.py:291 msgid "VSync Rate: " msgstr "Vertikalfrequenz: " #: ../textw/xconfig_text.py:419 #, python-format msgid "" "Select the monitor for your system. Use the '%s' button to reset to the " "probed values." msgstr "" "Wählen Sie den Bildschirm für Ihr System aus. Drücken Sie '%s', um zu den " "getesteten Werten zurückzukehren." #: ../textw/xconfig_text.py:423 msgid "Monitor:" msgstr "Monitor:" #: ../textw/xconfig_text.py:430 msgid "HSync Rate:" msgstr "Horizontalfrequenz:" #: ../textw/xconfig_text.py:440 msgid "VSync Rate:" msgstr "Vertikalfrequenz:" #: ../textw/xconfig_text.py:473 msgid "Choose monitor type" msgstr "Wähle Monitortyp" #: ../textw/xconfig_text.py:473 msgid "Proceed" msgstr "Fortfahren" #: ../textw/xconfig_text.py:543 msgid "Video Card" msgstr "Grafikkarte" #: ../textw/xconfig_text.py:544 #, python-format msgid "" "Please select the video card present in your system. Choose '%s' to reset " "the selection to the card the installer detected in your system." msgstr "" "Wählen Sie die Grafikkarte aus. Drücken Sie '%s', um zu der vom Installer " "erkannten Karte zurückzukehren." #: ../textw/xconfig_text.py:562 msgid "Video RAM" msgstr "Grafikspeicher" #: ../textw/xconfig_text.py:563 #, python-format msgid "" "Please select the amount of video RAM present on your video card. Choose '%" "s' to reset the selection to the amount the installer detected on your card." msgstr "" "Wählen Sie die Größe des Grafikspeichers auf Ihrer Grafikkarte aus. Drücken " "Sie '%s', um zu der vom Installationsprogramm erkannten Größe zurückzukehren." #: ../textw/xconfig_text.py:629 msgid "Skip X Configuration" msgstr "X-Konfiguration überspringen" #: ../textw/xconfig_text.py:631 msgid "Video Card Configuration" msgstr "Grafikkarte konfigurieren" #: ../textw/xconfig_text.py:645 msgid "Select the video card and video RAM for your system." msgstr "Wählen Sie die Grafikkarte und den Grafikspeicher für Ihr System." #: ../textw/xconfig_text.py:647 msgid "Video Card:" msgstr "Grafikkarte:" #: ../textw/xconfig_text.py:652 msgid "Unknown card" msgstr "Unbekannte Karte" #: ../textw/xconfig_text.py:660 msgid "Video RAM:" msgstr "RAM der Grafikkarte:" #: ../textw/zfcp_text.py:44 msgid "FCP Device" msgstr "FCP-Gerät" #: ../textw/zfcp_text.py:102 msgid "Device #" msgstr "Gerät #" #: ../textw/zfcp_text.py:110 msgid "Remove" msgstr "Entfernen" #: ../textw/zipl_text.py:24 msgid "" "The z/IPL Boot Loader will be installed on your system after installation is " "complete. You can now enter any additional kernel and chandev parameters " "which your machine or your setup may require." msgstr "" "Der z/IPL Bootloader wird auf Ihrem System installiert, nachdem die " "Installation abgeschlossen ist. Sie können nun zusätzliche Kernel und " "chandev Parameter angeben, welche Ihr Rechner oder Ihr Setup erfordern." #: ../textw/zipl_text.py:56 msgid "z/IPL Configuration" msgstr "z/IPL Konfiguration" #: ../textw/zipl_text.py:64 ../textw/zipl_text.py:68 msgid "Chandev line " msgstr "Chandev Zeile " #: ../installclasses/custom.py:11 msgid "_Custom" msgstr "_Benutzerdefiniert" #: ../installclasses/custom.py:13 msgid "" "Select this installation type to gain complete control over the installation " "process, including software package selection and partitioning." msgstr "" "Wählen Sie diesen Installationstyp, um eine komplette Kontrolle über die " "Installation zu haben, einschließlich der Wahl der Softwarepakete und dem " "Partitionieren." #: ../installclasses/personal_desktop.py:11 msgid "_Personal Desktop" msgstr "_Persönlicher Desktop" #: ../installclasses/personal_desktop.py:13 msgid "" "Perfect for personal computers or laptops, select this installation type to " "install a graphical desktop environment and create a system ideal for home " "or desktop use." msgstr "" "Mit dieser Installationsart können Sie eine grafische Desktop-Umgebung " "installieren und ein ideales System für Laptops oder Desktop-Computer " "erstellen." #: ../installclasses/personal_desktop.py:18 #: ../installclasses/rhel_desktop.py:16 msgid "" "\tDesktop shell (GNOME)\n" "\tOffice suite (OpenOffice.org)\n" "\tWeb browser \n" "\tEmail (Evolution)\n" "\tInstant messaging\n" "\tSound and video applications\n" "\tGames\n" msgstr "" "\tDesktop-Oberfläche (GNOME)\n" "\tOffice-Suite (OpenOffice.org)\n" "\tWeb-Browser \n" "\tE-Mail (Evolution)\n" "\tSofortnachrichten\n" "\tAudio- und Video-Anwendungen\n" "\tSpiele\n" #: ../installclasses/rhel_as.py:9 ../installclasses/rhel_as.py:11 msgid "Red Hat Enterprise Linux AS" msgstr "Red Hat Enterprise Linux AS" #: ../installclasses/rhel_as.py:16 ../installclasses/rhel_es.py:16 msgid "" "\tDesktop shell (GNOME)\n" "\tAdministration Tools\n" "\tServer Configuration Tools\n" "\tWeb Server\n" "\tWindows File Server (SMB)\n" msgstr "" "\tDesktop-Oberfläche (GNOME)\n" "\tAdministrationswerkzeuge\n" "\tServer-Konfigurationswerkzeuge\n" "\tWebserver\n" "\tWindows-Dateiserver (SMB)\n" #: ../installclasses/rhel_desktop.py:9 ../installclasses/rhel_desktop.py:11 msgid "Red Hat Enterprise Linux Desktop" msgstr "Red Hat Enterprise Linux Desktop" #: ../installclasses/rhel_es.py:9 ../installclasses/rhel_es.py:11 msgid "Red Hat Enterprise Linux ES" msgstr "Red Hat Enterprise Linux ES" #: ../installclasses/rhel_ws.py:9 ../installclasses/rhel_ws.py:11 msgid "Red Hat Enterprise Linux WS" msgstr "Red Hat Enterprise Linux WS" #: ../installclasses/rhel_ws.py:16 ../installclasses/workstation.py:14 msgid "" "\tDesktop shell (GNOME)\n" "\tOffice suite (OpenOffice.org)\n" "\tWeb browser \n" "\tEmail (Evolution)\n" "\tInstant messaging\n" "\tSound and video applications\n" "\tGames\n" "\tSoftware Development Tools\n" "\tAdministration Tools\n" msgstr "" "\tDesktop-Oberfläche (GNOME)\n" "\tOffice-Suite (OpenOffice.org)\n" "\tWeb-Browser \n" "\tE-Mail (Evolution)\n" "\tSofortnachrichten\n" "\tAudio- und Video-Anwendungen\n" "\tSpiele\n" "\tSoftware-Entwicklungswerkzeuge\n" "\tAdministrationswerkzeuge\n" #: ../installclasses/server.py:11 msgid "_Server" msgstr "_Server" #: ../installclasses/server.py:13 msgid "" "Select this installation type if you would like to set up file sharing, " "print sharing, and Web services. Additional services can also be enabled, " "and you can choose whether or not to install a graphical environment." msgstr "" "Wählen Sie diesen Installationstyp, wenn Sie das gemeinsame Nutzen von " "Dateien, Druckerfunktionen und Web-Diensten einstellen möchten. Darüber " "hinaus können weitere Dienste aktiviert werden und Sie können wählen, ob Sie " "die grafische Umgebung installieren möchten oder nicht." #: ../installclasses/workstation.py:8 msgid "_Workstation" msgstr "_Workstation" #: ../installclasses/workstation.py:10 msgid "" "This option installs a graphical desktop environment with tools for software " "development and system administration. " msgstr "" "Mit dieser Option installieren Sie eine grafische Desktop-Umgebung mit " "Werkzeugen für die Entwicklung von Software und für die Systemverwaltung." #: ../loader2/cdinstall.c:88 ../loader2/cdinstall.c:109 #: ../loader2/mediacheck.c:346 msgid "Media Check" msgstr "Medien-Funktionstest" #: ../loader2/cdinstall.c:88 ../loader2/cdinstall.c:91 #: ../loader2/cdinstall.c:109 ../loader2/cdinstall.c:117 #: ../loader2/method.c:420 msgid "Test" msgstr "Test" #: ../loader2/cdinstall.c:88 ../loader2/cdinstall.c:92 msgid "Eject CD" msgstr "CD auswerfen" #: ../loader2/cdinstall.c:89 #, c-format msgid "" "Choose \"%s\" to test the CD currently in the drive, or \"%s\" to eject the " "CD and insert another for testing." msgstr "" "Wählen Sie \"%s\", um die CD zu testen, die sich im Laufwerk befindet oder " "\"%s\", um die CD auszuwerfen und eine andere zu testen." #: ../loader2/cdinstall.c:110 #, c-format msgid "" "If you would like to test additional media, insert the next CD and press \"%s" "\". You do not have to test all CDs, although it is recommended you do so at " "least once.\n" "\n" "To begin the installation process insert CD #1 into the drive and press \"%s" "\"." msgstr "" "Wenn Sie zusätzliche Datenträger testen möchten, legen Sie die nächste CD " "ein, und drücken Sie \"%s\". Sie müssen nicht alle testen, sollten dies aber " "wenigstens einmal getan haben.\n" "\n" "Um den Installationsprozess zu starten, legen Sie die CD #1 ein, und drücken " "Sie \"%s\"." #: ../loader2/cdinstall.c:133 ../loader2/cdinstall.c:378 #, c-format msgid "" "The %s CD was not found in any of your CDROM drives. Please insert the %s CD " "and press %s to retry." msgstr "" "In Ihren CD-ROM-Laufwerken konnte keine %s CD gefunden werden. Legen Sie die " "%s CD ein, und drücken Sie %s, um es erneut zu versuchen." #: ../loader2/cdinstall.c:256 msgid "CD Found" msgstr "CD gefunden" #: ../loader2/cdinstall.c:258 #, c-format msgid "" "To begin testing the CD media before installation press %s.\n" "\n" "Choose %s to skip the media test and start the installation." msgstr "" "Drücken Sie %s, um die CD vor Beginn des Installationsvorgangs zu testen.\n" "\n" "Um den Test der Datenträger zu überspringen und die Installation zu starten, " "drücken Sie %s." #: ../loader2/cdinstall.c:373 #, c-format msgid "" "No %s CD was found which matches your boot media. Please insert the %s CD " "and press %s to retry." msgstr "" "Es wurde keine %s CD gefunden, welche Ihrem Boot-Medium entspricht. Bitte " "legen Sie die %s CD ein und drücken Sie %s, um es erneut zu versuchen." #: ../loader2/cdinstall.c:385 msgid "CD Not Found" msgstr "CD nicht gefunden" #: ../loader2/cdinstall.c:452 msgid "Cannot find kickstart file on CDROM." msgstr "Kann die Kickstart-Datei nicht auf der CD-ROM finden." #: ../loader2/driverdisk.c:124 ../loader2/firewire.c:50 msgid "Loading" msgstr "Laden" #: ../loader2/driverdisk.c:124 msgid "Reading driver disk..." msgstr "Treiberdiskette wird gelesen..." #: ../loader2/driverdisk.c:264 ../loader2/driverdisk.c:296 msgid "Driver Disk Source" msgstr "Quelle für die Treiberdiskette" #: ../loader2/driverdisk.c:265 msgid "" "You have multiple devices which could serve as sources for a driver disk. " "Which would you like to use?" msgstr "" "Sie verfügen über mehrere Geräte, welche als Quelle für eine Treiberdiskette " "dienen könnten. Welches Gerät möchten Sie verwenden?" #: ../loader2/driverdisk.c:297 msgid "" "There are multiple partitions on this device which could contain the driver " "disk image. Which would you like to use?" msgstr "" "Dieses Gerät enthält mehrere Partitionen, die das Abbild der Treiberdiskette " "enthalten könnten. Welche möchten Sie verwenden?" #: ../loader2/driverdisk.c:340 msgid "Failed to mount partition." msgstr "Fehler beim Einhängen der Partition." #: ../loader2/driverdisk.c:348 msgid "Select driver disk image" msgstr "Wählen Sie das Abbild der Treiberdiskette" #: ../loader2/driverdisk.c:349 msgid "Select the file which is your driver disk image." msgstr "Wählen Sie die Datei mit dem Abbild Ihrer Treiberdiskette." #: ../loader2/driverdisk.c:378 msgid "Failed to load driver disk from file." msgstr "Fehler beim Laden der Treiberdiskette aus der Datei." #: ../loader2/driverdisk.c:388 #, c-format msgid "Insert your driver disk into /dev/%s and press \"OK\" to continue." msgstr "" "Legen Sie Ihre Treiberdiskette in /dev/%s ein und drücken Sie auf \"OK\", um " "fortzufahren." #: ../loader2/driverdisk.c:390 msgid "Insert Driver Disk" msgstr "Legen Sie die Treiberdiskette ein" #: ../loader2/driverdisk.c:405 msgid "Failed to mount driver disk." msgstr "Treiberdiskette konnte nicht eingebunden werden." #: ../loader2/driverdisk.c:476 msgid "Manually choose" msgstr "Wählen Sie manuell aus" #: ../loader2/driverdisk.c:477 msgid "Load another disk" msgstr "Laden Sie eine andere Diskette" #: ../loader2/driverdisk.c:478 msgid "" "No devices of the appropriate type were found on this driver disk. Would " "you like to manually select the driver, continue anyway, or load another " "driver disk?" msgstr "" "Keine Geräte des betreffenden Typs wurden auf der Treiberdiskette gefunden. " "Möchten Sie einen Treiber manuell auswählen, trotzdem fortfahren, oder eine " "andere Treiberdiskette laden?" #: ../loader2/driverdisk.c:519 msgid "Driver disk" msgstr "Treiberdiskette" #: ../loader2/driverdisk.c:520 msgid "Do you have a driver disk?" msgstr "Verfügen Sie über eine Treiberdiskette?" #: ../loader2/driverdisk.c:530 msgid "More Driver Disks?" msgstr "Mehr Treiberdisketten?" #: ../loader2/driverdisk.c:531 msgid "Do you wish to load any more driver disks?" msgstr "Wollen Sie weitere Treiberdisketten laden?" #: ../loader2/driverdisk.c:583 ../loader2/driverdisk.c:621 #: ../loader2/hdinstall.c:470 ../loader2/kickstart.c:121 #: ../loader2/kickstart.c:131 ../loader2/kickstart.c:174 #: ../loader2/kickstart.c:408 ../loader2/modules.c:982 ../loader2/net.c:897 #: ../loader2/net.c:920 ../loader2/nfsinstall.c:248 #: ../loader2/urlinstall.c:442 ../loader2/urlinstall.c:451 #: ../loader2/urlinstall.c:462 msgid "Kickstart Error" msgstr "Kickstart-Fehler" #: ../loader2/driverdisk.c:584 #, c-format msgid "Unknown driver disk kickstart source: %s" msgstr "Ungültige Treiberdiskette im Kickstart-Befehl: %s" #: ../loader2/driverdisk.c:622 #, c-format msgid "" "The following invalid argument was specified for the kickstart driver disk " "command: %s:%s" msgstr "" "Folgendes ungültiges Argument wurde im Treiberdisketten Kickstart-Befehl " "angegeben: %s:%s" #: ../loader2/driverselect.c:60 #, c-format msgid "" "Please enter any parameters which you wish to pass to the %s module " "separated by spaces. If you don't know what parameters to supply, skip this " "screen by pressing the \"OK\" button. A list of available options can be " "obtained by pressing the F1 key." msgstr "" "Bitte geben Sie alle Parameter ein, welche Sie dem %s Modul übergeben " "möchten, wobei Sie diese durch Leerstellen trennen. Wenn Sie nicht wissen, " "welche Parameter Sie angeben sollen, können Sie diesen Bildschirm einfach " "durch Klicken auf \"OK\" überspringen. Eine Liste der möglichen Optionen " "können Sie durch Drücken der F1 Taste erhalten." #: ../loader2/driverselect.c:83 msgid "Enter Module Parameters" msgstr "Geben Sie die Parameter für das Modul ein" #: ../loader2/driverselect.c:186 msgid "No drivers found" msgstr "Keine Treiber gefunden" #: ../loader2/driverselect.c:186 msgid "Load driver disk" msgstr "Lade Treiberdiskette" #: ../loader2/driverselect.c:187 msgid "" "No drivers were found to manually insert. Would you like to use a driver " "disk?" msgstr "" "Es wurden keine Treiber zum manuellen Einfügen gefunden. Wollen Sie eine " "Treiberdiskette verwenden?" #: ../loader2/driverselect.c:206 msgid "" "Please select the driver below which you wish to load. If it does not " "appear and you have a driver disk, press F2." msgstr "" "Bitte wählen Sie den zu ladenden Treiber in der unten angegebenen Liste " "aus. Wenn der benötigte Treiber nicht in dieser Liste enthalten ist und Sie " "über eine Treiberdiskette verfügen, drücken Sie F2." #: ../loader2/driverselect.c:214 msgid "Specify optional module arguments" msgstr "Geben Sie die optionalen Parameter für das Modul an" #: ../loader2/driverselect.c:234 msgid "Select Device Driver to Load" msgstr "Wählen Sie den zu ladenden Gerätetreiber aus" #: ../loader2/firewire.c:50 ../loader2/windows.c:65 #, c-format msgid "Loading %s driver..." msgstr "%s Treiber wird geladen..." #: ../loader2/hdinstall.c:102 ../loader2/hdinstall.c:155 #: ../loader2/nfsinstall.c:194 ../loader2/urlinstall.c:148 #, c-format msgid "" "The %s installation tree in that directory does not seem to match your boot " "media." msgstr "" "Der %s Installationsbaum in diesem Verzeichnis scheint ihrem Boot-Medium " "nicht zu entsprechen." #: ../loader2/hdinstall.c:218 msgid "" "An error occured reading the install from the ISO images. Please check your " "ISO images and try again." msgstr "" "Ein Fehler ist beim Lesen der Installation von ISO-Images aufgetreten. " "Überprüfen Sie Ihre ISO-Images, und versuchen Sie es erneut." #: ../loader2/hdinstall.c:331 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" "In Ihrem System sind keine Festplatten vorhanden! Möchten Sie jetzt weitere " "Geräte konfigurieren?" #: ../loader2/hdinstall.c:347 #, c-format msgid "" "What partition and directory on that partition hold the CD (iso9660) images " "for %s? If you don't see the disk drive you're using listed here, press F2 " "to configure additional devices." msgstr "" "Welche Partition und welches Verzeichnis dieser Partition enthalten die CD " "(ISO9660) Images für %s? Wenn das Festplattenlaufwerk, das Sie verwenden, " "nicht in dieser Liste aufgeführt ist, drücken Sie F2, um zusätzliche Geräte " "zu konfigurieren. " #: ../loader2/hdinstall.c:369 msgid "Directory holding images:" msgstr "Verzeichnis, das die Images enthält:" #: ../loader2/hdinstall.c:396 msgid "Select Partition" msgstr "Partition auswählen" #: ../loader2/hdinstall.c:436 #, c-format msgid "Device %s does not appear to contain %s CDROM images." msgstr "Auf dem Gerät %s befinden sich keine Images der %s CD-ROM." #: ../loader2/hdinstall.c:471 #, c-format msgid "Bad argument to HD kickstart method command %s: %s" msgstr "Ungültiges Argument zum HD Kickstart-Befehl %s: %s" #: ../loader2/hdinstall.c:539 ../loader2/hdinstall.c:595 msgid "Cannot find kickstart file on hard drive." msgstr "Kann die Kickstart-Datei nicht auf der Festplatte finden." #: ../loader2/hdinstall.c:582 #, c-format msgid "Cannot find hard drive for BIOS disk %s" msgstr "Kann Festplatte nicht finden für BIOS Laufwerk %s" #: ../loader2/kbd.c:123 msgid "Keyboard Type" msgstr "Tastaturtyp" #: ../loader2/kbd.c:124 msgid "What type of keyboard do you have?" msgstr "Über welchen Tastaturtyp verfügen Sie?" #: ../loader2/kickstart.c:122 #, c-format msgid "Error opening kickstart file %s: %s" msgstr "Fehler beim Öffnen der Kickstart-Datei %s: %s" #: ../loader2/kickstart.c:132 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "Fehler beim Lesen des Inhalts der Kickstart-Datei %s: %s" #: ../loader2/kickstart.c:175 #, c-format msgid "Error in %s on line %d of kickstart file %s." msgstr "Fehler in %s in der Zeile %d der Kickstart-Datei %s." #: ../loader2/kickstart.c:274 msgid "Cannot find ks.cfg on boot floppy." msgstr "ks.cfg konnte nicht auf der Bootdiskette gefunden werden." #: ../loader2/kickstart.c:409 #, c-format msgid "Bad argument to shutdown kickstart method command %s: %s" msgstr "Ungültiges Argument zum Abschalten des Schnellstartmethoden-Befehls %s: %s" #: ../loader2/lang.c:53 #, c-format msgid "Welcome to %s - Rescue Mode" msgstr "Willkommen bei %s - Rettungsmodus" #: ../loader2/lang.c:54 ../loader2/loader.c:139 msgid " / between elements | selects | next screen " msgstr " / Elemente wechseln | Auswahl | Weiter" #: ../loader2/lang.c:377 msgid "Choose a Language" msgstr "Wählen Sie eine Sprache aus" #: ../loader2/loader.c:108 msgid "Local CDROM" msgstr "Lokales CD-ROM" #: ../loader2/loader.c:110 msgid "Hard drive" msgstr "Festplatte" #: ../loader2/loader.c:111 msgid "NFS image" msgstr "NFS-Image" #: ../loader2/loader.c:303 msgid "Update Disk Source" msgstr "Quelle der Update-Diskette" #: ../loader2/loader.c:304 msgid "" "You have multiple devices which could serve as sources for an update disk. " "Which would you like to use?" msgstr "" "Sie verfügen über mehrere Geräte, die als Quelle für eine Update-Diskette " "dienen könnten. Welches Gerät möchten Sie verwenden?" #: ../loader2/loader.c:319 #, c-format msgid "Insert your updates disk into /dev/%s and press \"OK\" to continue." msgstr "" "Legen Sie Ihre Update-Disketten in /dev/%s ein und klicken Sie auf \"OK\", " "um fortzufahren." #: ../loader2/loader.c:321 msgid "Updates Disk" msgstr "Update-Diskette" #: ../loader2/loader.c:333 msgid "Failed to mount updates disk" msgstr "Update-Diskette konnte nicht eingebunden werden." #: ../loader2/loader.c:336 msgid "Updates" msgstr "Updates" #: ../loader2/loader.c:336 msgid "Reading anaconda updates..." msgstr "Anaconda-Updates werden gelesen..." #: ../loader2/loader.c:364 msgid "" "No hard drives have been found. You probably need to manually choose device " "drivers for the installation to succeed. Would you like to select drivers " "now?" msgstr "" "Es wurden keine Festplattenlaufwerke gefunden. Sie müssen für die " "Installation die Gerätetreiber wahrscheinlich manuell auswählen. Möchten " "Sie die Treiber jetzt auswählen? " #: ../loader2/loader.c:688 #, c-format msgid "You do not have enough RAM to install %s on this machine." msgstr "" "Ihnen steht nicht genügend RAM zur Verfügung, um %s auf diesem Computer zu " "installieren." #: ../loader2/loader.c:861 msgid "Rescue Method" msgstr "Rettungsmethode" #: ../loader2/loader.c:862 msgid "Installation Method" msgstr "Installationsmethode" #: ../loader2/loader.c:864 msgid "What type of media contains the rescue image?" msgstr "Auf welchem Datenträgertyp ist die Rettungsdiskette enthalten?" #: ../loader2/loader.c:866 msgid "What type of media contains the packages to be installed?" msgstr "Auf welchem Datenträgertyp sind die zu installierenden Pakete enthalten?" #: ../loader2/loader.c:890 msgid "No driver found" msgstr "Kein Treiber gefunden" #: ../loader2/loader.c:890 msgid "Select driver" msgstr "Treiber auswählen" #: ../loader2/loader.c:891 msgid "Use a driver disk" msgstr "Benutzen Sie eine Treiberdiskette" #: ../loader2/loader.c:892 msgid "" "Unable to find any devices of the type needed for this installation type. " "Would you like to manually select your driver or use a driver disk?" msgstr "" "Es wurden keine Geräte des für diesen Installationstyp benötigten Typs " "gefunden. Möchten Sie einen Treiber manuell auswählen oder eine " "Treiberdiskette benutzen?" #: ../loader2/loader.c:1052 msgid "The following devices have been found on your system." msgstr "Die folgenden Geräte wurden auf Ihrem System gefunden." #: ../loader2/loader.c:1054 msgid "" "No device drivers have been loaded for your system. Would you like to load " "any now?" msgstr "" "Für Ihr System wurden keine speziellen Gerätetreiber geladen. Sollen jetzt " "welche geladen werden?" #: ../loader2/loader.c:1058 msgid "Devices" msgstr "Geräte" #: ../loader2/loader.c:1059 msgid "Done" msgstr "Fertig" #: ../loader2/loader.c:1060 msgid "Add Device" msgstr "Gerät hinzufügen" #: ../loader2/loader.c:1182 #, c-format msgid "loader has already been run. Starting shell.\n" msgstr "Loader wurde bereits ausgeführt. Starte jetzt das Befehlsfenster.\n" #: ../loader2/loader.c:1551 #, c-format msgid "Running anaconda, the %s rescue mode - please wait...\n" msgstr "Anaconda, der %s Rettungs-Modus, wird ausgeführt - bitte warten...\n" #: ../loader2/loader.c:1553 #, c-format msgid "Running anaconda, the %s system installer - please wait...\n" msgstr "" "Anaconda, das %s System-Installationsprogramm, wird ausgeführt - bitte " "warten...\n" #: ../loader2/mediacheck.c:330 msgid "" "Unable to read the disc checksum from the primary volume descriptor. This " "probably means the disc was created without adding the checksum." msgstr "" "Die Prüfsumme des primären Volume-Deskriptors konnte nicht gelesen werden. " "Das bedeutet wahrscheinlich, dass der Datenträger erstellt wurde, ohne die " "Prüfsumme hinzuzufügen." #: ../loader2/mediacheck.c:338 #, c-format msgid "Checking \"%s\"..." msgstr "\"%s\" wird überprüft..." #: ../loader2/mediacheck.c:340 #, c-format msgid "Checking media now..." msgstr "Medien werden jetzt überprüft..." #: ../loader2/mediacheck.c:386 #, c-format msgid "Unable to find install image %s" msgstr "Das Installationsimage %s kann nicht gefunden werden." #: ../loader2/mediacheck.c:396 msgid "" "FAIL.\n" "\n" "The image which was just tested has errors. This could be due to a corrupt " "download or a bad disc. If applicable, please clean the disc and try " "again. If this test continues to fail you should not continue the install." msgstr "" "FEHLGESCHLAGEN.\n" "\n" "Das gerade getestete Image enthält Fehler. Die könnte durch ein fehlerhaftes " "Download oder eine beschädigte CD hervorgerufen werden. Falls möglich, " "reinigen Sie die CD und versuchen Sie es erneut. Sollte dieser Test auch " "weiterhin fehlschlagen, sollten Sie mit der Installation nicht fortfahren." #: ../loader2/mediacheck.c:407 msgid "" "PASS.\n" "\n" "It is OK to install from this media." msgstr "" "FEHLERFREI.\n" "\n" "Von diesem Medium kann installiert werden." #: ../loader2/mediacheck.c:411 msgid "" "NA.\n" "\n" "No checksum information available, unable to verify media." msgstr "" "Nicht verfügbar.\n" "\n" "Keine Prüfsummen-Informationen verfügbar, Medium konnte nicht verifiziert " "werden." #: ../loader2/mediacheck.c:415 msgid "Media Check Result" msgstr "Ergebnis Medien-Funktionstest" #: ../loader2/mediacheck.c:419 #, c-format msgid "" "of the image:\n" "\n" "%s\n" "\n" msgstr "" "des Images:\n" "\n" "%s\n" "\n" #: ../loader2/mediacheck.c:423 #, c-format msgid "The media check %sis complete, and the result is: %s\n" msgstr "Der Medien-Test %s ist mit folgendem Ergebnis abgeschlossen: %s\n" #: ../loader2/method.c:157 ../loader2/method.c:374 ../loader2/method.c:459 #, c-format msgid "Failed to read directory %s: %s" msgstr "Verzeichnis %s konnte nicht gelesen werden: %s" #: ../loader2/method.c:417 #, c-format msgid "" "Would you like to perform a checksum test of the ISO image:\n" "\n" " %s?" msgstr "" "Möchten Sie einen Prüfsummen-Test des ISO-Images durchführen:\n" "\n" "... %s?" #: ../loader2/method.c:420 msgid "Checksum Test" msgstr "Prüfsummen-Test" #: ../loader2/modules.c:983 #, c-format msgid "Bad argument to device kickstart method command %s: %s" msgstr "Ungültiges Argument zum Treiber Kickstart-Befehl %s: %s" #: ../loader2/net.c:47 #, c-format msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your %s server\n" " o the directory on that server containing\n" " %s for your architecture\n" msgstr "" "Geben Sie folgende Informationen ein:\n" "\n" " o Name oder IP-Adresse Ihres %s-Servers\n" " o das Verzeichnis auf diesem Server, in welchem\n" " %s für Ihre Architektur enthalten ist\n" #: ../loader2/net.c:220 #, c-format msgid "" "%s is a wireless network adapter. Please provide the ESSID and encryption " "key needed to access your wireless network. If no key is needed, leave this " "field blank and the install will continue." msgstr "" "%s ist ein Funknetzwerkgerät. Bitte geben Sie die ESSID und den " "Kyptoschlüssel Ihres Funknetzes an. Falls dieses keinen Schlüssel benötigt, " "lassen Sie das Feld frei und die Installation fährt fort." #: ../loader2/net.c:230 msgid "Wireless Settings" msgstr "Einstellungen für das Funknetz" #: ../loader2/net.c:259 msgid "Nameserver IP" msgstr "Nameserver-IP" #: ../loader2/net.c:263 msgid "Nameserver" msgstr "Nameserver" #: ../loader2/net.c:264 msgid "" "Your dynamic IP request returned IP configuration information, but it did " "not include a DNS nameserver. If you know what your nameserver is, please " "enter it now. If you don't have this information, you can leave this field " "blank and the install will continue." msgstr "" "Auf Ihre dynamische IP-Anforderung wurden IP-Konfigurationsinformationen " "zurückgegeben, die aber keinen DNS-Nameserver enthielten. Wenn Sie Ihren " "Nameserver kennen, geben Sie ihn jetzt ein. Wenn Sie über die entsprechenden " "Angaben nicht verfügen, müssen Sie in dieses Feld nichts eintragen. Die " "Installation wird fortgesetzt." #: ../loader2/net.c:274 msgid "Invalid IP Information" msgstr "Ungültige IP-Angaben" #: ../loader2/net.c:275 msgid "You entered an invalid IP address." msgstr "Sie haben eine ungültige IP-Adresse eingegeben." #: ../loader2/net.c:342 ../loader2/net.c:596 msgid "Dynamic IP" msgstr "Dynamische IP" #: ../loader2/net.c:343 ../loader2/net.c:597 #, c-format msgid "Sending request for IP information for %s..." msgstr "Sende Anforderung für IP-Informationen für %s..." #: ../loader2/net.c:480 msgid "" "Please enter the IP configuration for this machine. Each item should be " "entered as an IP address in dotted-decimal notation (for example, 1.2.3.4)." msgstr "" "Geben Sie die IP-Konfiguration für diesen Rechner ein. Jeder Eintrag muss " "als IP-Adresse mit durch Punkt getrennte Dezimalzahlen eingegeben werden (z." "B. 1.2.3.4)." #: ../loader2/net.c:486 msgid "IP address:" msgstr "IP-Adresse:" #: ../loader2/net.c:489 msgid "Netmask:" msgstr "Netzmaske:" #: ../loader2/net.c:492 msgid "Default gateway (IP):" msgstr "Standard-Gateway (IP):" #: ../loader2/net.c:495 msgid "Primary nameserver:" msgstr "Primärer Nameserver:" #: ../loader2/net.c:522 msgid "Use dynamic IP configuration (BOOTP/DHCP)" msgstr "Dynamische IP-Konfiguration (BOOTP/DHCP) verwenden" #: ../loader2/net.c:550 msgid "Configure TCP/IP" msgstr "TCP/IP konfigurieren" #: ../loader2/net.c:587 msgid "Missing Information" msgstr "Fehlende Informationen" #: ../loader2/net.c:588 msgid "You must enter both a valid IP address and a netmask." msgstr "Sie müssen sowohl eine gültige IP-Adresse als auch eine Netzmaske eingeben." #: ../loader2/net.c:811 msgid "Determining host name and domain..." msgstr "Rechnername und Domäne werden ermittelt..." #: ../loader2/net.c:898 #, c-format msgid "Bad argument to kickstart network command %s: %s" msgstr "Ungültiges Argument im Kickstart-Netzwerkbefehl %s: %s" #: ../loader2/net.c:921 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "Ungültiges Boot-Protokoll %s in Netzwerkbefehl enthalten" #: ../loader2/net.c:1065 msgid "Networking Device" msgstr "Netzwerkgerät" #: ../loader2/net.c:1066 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "" "Sie verfügen über mehrere Netzwerkgeräte in diesem System. Über welches " "Gerät soll jetzt installiert werden?" #: ../loader2/nfsinstall.c:44 msgid "NFS server name:" msgstr "NFS-Servername:" #: ../loader2/nfsinstall.c:47 ../loader2/urls.c:288 #, c-format msgid "%s directory:" msgstr "%s Verzeichnis:" #: ../loader2/nfsinstall.c:53 msgid "NFS Setup" msgstr "NFS-Setup" #: ../loader2/nfsinstall.c:198 #, c-format msgid "That directory does not seem to contain a %s installation tree." msgstr "Dieses Verzeichnis scheint keinen %s Installationsbaum zu enthalten." #: ../loader2/nfsinstall.c:211 msgid "That directory could not be mounted from the server." msgstr "Dieses Verzeichnis konnte nicht vom Server eingebunden werden." #: ../loader2/nfsinstall.c:249 #, c-format msgid "Bad argument to NFS kickstart method command %s: %s" msgstr "Ungültiges Argument im NFS Kickstart-Befehl %s: %s" #: ../loader2/telnetd.c:80 ../loader2/telnetd.c:122 msgid "Telnet" msgstr "Telnet" #: ../loader2/telnetd.c:80 msgid "Waiting for telnet connection..." msgstr "Auf telnet-Verbindung warten..." #: ../loader2/telnetd.c:122 msgid "Running anaconda via telnet..." msgstr "Anaconda wird via telnet ausgeführt..." #: ../loader2/urlinstall.c:68 #, c-format msgid "Unable to retrieve %s://%s/%s/%s." msgstr "%s://%s/%s/%s nicht abrufbar." #: ../loader2/urlinstall.c:140 msgid "Unable to retrieve the install image." msgstr "Das Installationsimage kann nicht abgerufen werden." #: ../loader2/urlinstall.c:277 msgid "Media Detected" msgstr "Medium gefunden" #: ../loader2/urlinstall.c:278 msgid "Local installation media detected..." msgstr "Lokale Installationsmedien gefunden..." #: ../loader2/urlinstall.c:443 #, c-format msgid "Bad argument to Url kickstart method command %s: %s" msgstr "Ungültiges Argument im Url Kickstart-Befehl %s: %s" #: ../loader2/urlinstall.c:452 msgid "Must supply a --url argument to Url kickstart method." msgstr "Sie müssen ein --url Argument im Url Kickstart-Befehl angeben." #: ../loader2/urlinstall.c:463 #, c-format msgid "Unknown Url method %s" msgstr "Unbekannte Url Methode %s" #: ../loader2/urls.c:173 #, c-format msgid "Failed to log into %s: %s" msgstr "Einloggen auf %s fehlgeschlagen: %s" #: ../loader2/urls.c:183 ../loader2/urls.c:192 #, c-format msgid "Failed to retrieve %s: %s" msgstr "%s konnte nicht abgerufen werden: %s" #: ../loader2/urls.c:199 msgid "Retrieving" msgstr "Abrufen" #: ../loader2/urls.c:283 msgid "FTP site name:" msgstr "Name des FTP-Servers:" #: ../loader2/urls.c:284 msgid "Web site name:" msgstr "Name der Website:" #: ../loader2/urls.c:303 msgid "Use non-anonymous ftp" msgstr "Nicht anonymen FTP verwenden" #: ../loader2/urls.c:312 msgid "FTP Setup" msgstr "FTP-Setup" #: ../loader2/urls.c:313 msgid "HTTP Setup" msgstr "HTTP-Setup" #: ../loader2/urls.c:323 msgid "You must enter a server name." msgstr "Sie müssen einen Servernamen eingeben." #: ../loader2/urls.c:328 msgid "You must enter a directory." msgstr "Sie müssen ein Verzeichnis eingeben." #: ../loader2/urls.c:333 msgid "Unknown Host" msgstr "Unbekannter Rechner" #: ../loader2/urls.c:334 #, c-format msgid "%s is not a valid hostname." msgstr "%s ist kein gültiger Rechnername." #: ../loader2/urls.c:407 msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below." msgstr "" "Geben Sie bei Verwendung eines nicht anonymen FTP-Servers nachfolgend den " "Namen des Accounts und das gewünschte Passwort ein." #: ../loader2/urls.c:412 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" "Geben Sie bei Verwendung eines HTTP-Proxy-Servers den Namen des HTTP-Proxy-" "Servers ein." #: ../loader2/urls.c:434 msgid "Account name:" msgstr "Accountname:" #: ../loader2/urls.c:459 msgid "Further FTP Setup" msgstr "Weitere FTP-Einstellungen" #: ../loader2/urls.c:462 msgid "Further HTTP Setup" msgstr "Weitere HTTP-Einstellungen" #: ../loader2/windows.c:64 msgid "Loading SCSI driver" msgstr "SCSI-Treiber wird geladen" #: tmp/anaconda.glade.h:1 msgid "Hide _Help" msgstr "_Hilfe ausblenden" #: tmp/anaconda.glade.h:2 msgid "Reboo_t" msgstr "Neu star_ten" #: tmp/anaconda.glade.h:3 msgid "Show _Help" msgstr "_Hilfe anzeigen" #: tmp/anaconda.glade.h:5 msgid "_Next" msgstr "_Weiter" #: tmp/anaconda.glade.h:6 msgid "_Release Notes" msgstr "Info zur Ve_rsion (Release Notes)" #. generated from zone.tab msgid "Acre" msgstr "Acre" #. generated from zone.tab msgid "Alagoas, Sergipe" msgstr "Alagoas, Sergipe" #. generated from zone.tab msgid "Alaska Time" msgstr "Alaska Zeit" #. generated from zone.tab msgid "Alaska Time - Alaska panhandle" msgstr "Alaska Zeit- Alaska Panhandle" #. generated from zone.tab msgid "Alaska Time - Alaska panhandle neck" msgstr "Alaska Zeit - Alaska Panhandle Neck" #. generated from zone.tab msgid "Alaska Time - west Alaska" msgstr "Alaska Zeit - West-Alaska" #. generated from zone.tab msgid "Aleutian Islands" msgstr "Aleuten" #. generated from zone.tab msgid "Amapa, E Para" msgstr "Amapa, Ost-Para" #. generated from zone.tab msgid "Amundsen-Scott Station, South Pole" msgstr "Scott Amundsen-Station, Südpol" #. generated from zone.tab msgid "Aqtobe (Aktobe)" msgstr "Aqtobe (Aktobe)" #. generated from zone.tab msgid "Atlantic Time - E Labrador" msgstr "Atlantische Zeit - Ost-Labrador" #. generated from zone.tab msgid "Atlantic Time - Nova Scotia (most places), NB, W Labrador, E Quebec & PEI" msgstr "" "Atlantische Zeit - Nova Scotia (die meisten Orte), NB, West-Labrador, Ost-" "Quebec & PEI" #. generated from zone.tab msgid "Atlantic Time - Nova Scotia - places that did not observe DST 1966-1971" msgstr "" "Atlantische Zeit - Nova Scotia - Orte, die die Sommerzeit 1966-1971 nicht " "angewendet haben" #. generated from zone.tab msgid "Atlantic islands" msgstr "Atlantische Inseln" #. generated from zone.tab msgid "Atyrau (Atirau, Gur'yev), Mangghystau (Mankistau)" msgstr "Atyrau (Atirau, Gur'yev), Mangghystau (Mankistau)" #. generated from zone.tab msgid "Azores" msgstr "Azoren" #. generated from zone.tab msgid "Bahia" msgstr "Bahia" #. generated from zone.tab msgid "Bayan-Olgiy, Govi-Altai, Hovd, Uvs, Zavkhan" msgstr "Bayan-Olgiy, Govi-Altai, Hovd, Uvs, Zavkhan" #. generated from zone.tab msgid "Buenos Aires (BA, CF)" msgstr "Buenos Aires (BA, CF)" #. generated from zone.tab msgid "Canary Islands" msgstr "Kanarische Inseln" #. generated from zone.tab msgid "Casey Station, Bailey Peninsula" msgstr "Casey Station, Bailey Peninsula" #. generated from zone.tab msgid "Catamarca (CT)" msgstr "Catamarca (CT)" #. generated from zone.tab msgid "Central Standard Time - Saskatchewan - midwest" msgstr "Central Standard Time - Saskatchewan - Mittelwesten" #. generated from zone.tab msgid "Central Standard Time - Saskatchewan - most locations" msgstr "Central Standard Time - Saskatchewan - die meisten Orte" #. generated from zone.tab msgid "Central Time" msgstr "Central Time" #. generated from zone.tab msgid "Central Time - Campeche, Yucatan" msgstr "Central Time - Campeche, Yucatan" #. generated from zone.tab msgid "Central Time - Coahuila, Durango, Nuevo Leon, Tamaulipas" msgstr "Central Time - Coahuila, Durango, Nuevo Leon, Tamaulipas" #. generated from zone.tab msgid "Central Time - Manitoba & west Ontario" msgstr "Central Time - Manitoba & West Ontario" #. generated from zone.tab msgid "Central Time - Michigan - Wisconsin border" msgstr "Central Time - Michigan - Grenze Wisconsin" #. generated from zone.tab msgid "Central Time - North Dakota - Oliver County" msgstr "Central Time - North Dakota - Oliver County" #. generated from zone.tab msgid "Central Time - Quintana Roo" msgstr "Central Time - Quintana Roo" #. generated from zone.tab msgid "Central Time - Rainy River & Fort Frances, Ontario" msgstr "Central Time - Rainy River & Fort Frances, Ontario" #. generated from zone.tab msgid "Central Time - most locations" msgstr "Central Time - die meisten Orte" #. generated from zone.tab msgid "Central Time - west Nunavut" msgstr "Central Time - West Nunavut" #. generated from zone.tab msgid "Ceuta & Melilla" msgstr "Ceuta & Melilla" #. generated from zone.tab msgid "Chatham Islands" msgstr "Chatham Inseln" #. generated from zone.tab msgid "Chubut (CH)" msgstr "Chubut (CH)" #. generated from zone.tab msgid "Davis Station, Vestfold Hills" msgstr "Davis Station, Vestfold Hills" #. generated from zone.tab msgid "Dornod, Sukhbaatar" msgstr "Dornod, Sukhbaatar " #. generated from zone.tab msgid "Dumont-d'Urville Base, Terre Adelie" msgstr "Dumont-d'Urville Base, Terre Adelie" #. generated from zone.tab msgid "E Amazonas" msgstr "Ost-Amazonas" #. generated from zone.tab msgid "Easter Island & Sala y Gomez" msgstr "Osterinsel & Sala y Gomez" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - Crawford County" msgstr "Eastern Standard Time - Indiana - Crawford County" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - Starke County" msgstr "Eastern Standard Time - Indiana - Starke County" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - Switzerland County" msgstr "Eastern Standard Time - Indiana - Switzerland County" #. generated from zone.tab msgid "Eastern Standard Time - Indiana - most locations" msgstr "Eastern Standard Time - Indiana - die meisten Orte" #. generated from zone.tab msgid "Eastern Standard Time - Pangnirtung, Nunavut" msgstr "Eastern Standard Time - Pangnirtung, Nunavut" #. generated from zone.tab msgid "Eastern Standard Time - central Nunavut" msgstr "Eastern Standard Time - Zentral-Nunavut" #. generated from zone.tab msgid "Eastern Standard Time - east Nunavut" msgstr "Eastern Standard Time - Ost-Nunavut" #. generated from zone.tab msgid "Eastern Time" msgstr "Eastern Time" #. generated from zone.tab msgid "Eastern Time - Kentucky - Louisville area" msgstr "Eastern Time - Kentucky - Louisville" #. generated from zone.tab msgid "Eastern Time - Kentucky - Wayne County" msgstr "Eastern Time - Kentucky - Wayne County" #. generated from zone.tab msgid "Eastern Time - Michigan - most locations" msgstr "Eastern Time - Michigan - die meisten Orte" #. generated from zone.tab msgid "Eastern Time - Ontario & Quebec - places that did not observe DST 1967-1973" msgstr "" "Eastern Time - Ontario & Quebec - Orte die die Sommerzeit 1967-1973 nicht " "anwenden" #. generated from zone.tab msgid "Eastern Time - Ontario - most locations" msgstr "Eastern Time - Ontario - die meisten Orte" #. generated from zone.tab msgid "Eastern Time - Quebec - most locations" msgstr "Eastern Time - Quebec - die meisten Orte" #. generated from zone.tab msgid "Eastern Time - Thunder Bay, Ontario" msgstr "Eastern Time - Thunder Bay, Ontario" #. generated from zone.tab msgid "Galapagos Islands" msgstr "Galapagos Inseln" #. generated from zone.tab msgid "Gambier Islands" msgstr "Gambier Inseln" #. generated from zone.tab msgid "Gilbert Islands" msgstr "Gilbert Inseln" #. generated from zone.tab msgid "Great Britain" msgstr "Großbritannien" #. generated from zone.tab msgid "Hawaii" msgstr "Hawaii" #. generated from zone.tab msgid "Heilongjiang" msgstr "Heilongjiang" #. generated from zone.tab msgid "Irian Jaya & the Moluccas" msgstr "Irian Jaya & die Molukken" #. generated from zone.tab msgid "Jan Mayen" msgstr "Jan Mayen" #. generated from zone.tab msgid "Java & Sumatra" msgstr "Java & Sumatra" #. generated from zone.tab msgid "Johnston Atoll" msgstr "Johnston Atoll" #. generated from zone.tab msgid "Jujuy (JY)" msgstr "Jujuy (JY)" #. generated from zone.tab msgid "Kosrae" msgstr "Kosrae" #. generated from zone.tab msgid "Kwajalein" msgstr "Kwajalein" #. generated from zone.tab msgid "La Rioja (LR)" msgstr "La Rioja (LR)" #. generated from zone.tab msgid "Line Islands" msgstr "Line Islands" #. generated from zone.tab msgid "Lord Howe Island" msgstr "Lord Howe Island" #. generated from zone.tab msgid "Madeira Islands" msgstr "Madeira" #. generated from zone.tab msgid "Marquesas Islands" msgstr "Marquesas Islands" #. generated from zone.tab msgid "Mato Grosso" msgstr "Mato Grosso" #. generated from zone.tab msgid "Mato Grosso do Sul" msgstr "Mato Grosso do Sul" #. generated from zone.tab msgid "Mawson Station, Holme Bay" msgstr "Mawson Station, Holme Bay" #. generated from zone.tab msgid "McMurdo Station, Ross Island" msgstr "McMurdo Station, Ross Island" #. generated from zone.tab msgid "Mendoza (MZ)" msgstr "Mendoza (MZ)" #. generated from zone.tab msgid "Midway Islands" msgstr "Midway Islands" #. generated from zone.tab msgid "Moscow+00 - west Russia" msgstr "Moskau+00 - West-Russland" #. generated from zone.tab msgid "Moscow+01 - Caspian Sea" msgstr "Moskau+01 - Kaspisches Meer" #. generated from zone.tab msgid "Moscow+02 - Urals" msgstr "Moskau+02 - Ural" #. generated from zone.tab msgid "Moscow+03 - Novosibirsk" msgstr "Moskau+03 - Novosibirsk" #. generated from zone.tab msgid "Moscow+03 - west Siberia" msgstr "Moskau+03 - West-Sibirien" #. generated from zone.tab msgid "Moscow+04 - Yenisei River" msgstr "Moskau+04 - Yenisei " #. generated from zone.tab msgid "Moscow+05 - Lake Baikal" msgstr "Moskau+05 - Baikalsee" #. generated from zone.tab msgid "Moscow+06 - Lena River" msgstr "Moskau+06 - Lena " #. generated from zone.tab msgid "Moscow+07 - Amur River" msgstr "Moskau+07 - Amur" #. generated from zone.tab msgid "Moscow+07 - Sakhalin Island" msgstr "Moskau+08 - Sakhalin Insel" #. generated from zone.tab msgid "Moscow+08 - Magadan" msgstr "Moskau+08 - Magadan" #. generated from zone.tab msgid "Moscow+09 - Kamchatka" msgstr "Moskau+09 - Kamchatka" #. generated from zone.tab msgid "Moscow+10 - Bering Sea" msgstr "Moskau+10 - Beringsee" #. generated from zone.tab msgid "Moscow-01 - Kaliningrad" msgstr "Moskau-01 - Kaliningrad" #. generated from zone.tab msgid "Mountain Standard Time - Arizona" msgstr "Mountain Standard Time - Arizona" #. generated from zone.tab msgid "Mountain Standard Time - Dawson Creek & Fort Saint John, British Columbia" msgstr "Mountain Standard Time - Dawson Creek & Fort Saint John, British Columbia" #. generated from zone.tab msgid "Mountain Standard Time - Sonora" msgstr "Mountain Standard Time - Sonora" #. generated from zone.tab msgid "Mountain Time" msgstr "Mountain Time" #. generated from zone.tab msgid "Mountain Time - Alberta, east British Columbia & west Saskatchewan" msgstr "Mountain Time - Alberta, Ost-British Columbia & West-Saskatchewan" #. generated from zone.tab msgid "Mountain Time - Chihuahua" msgstr "Mountain Time - Chihuahua" #. generated from zone.tab msgid "Mountain Time - Navajo" msgstr "Mountain Time - Navajo" #. generated from zone.tab msgid "Mountain Time - S Baja, Nayarit, Sinaloa" msgstr "Mountain Time - S Baja, Nayarit, Sinaloa" #. generated from zone.tab msgid "Mountain Time - central Northwest Territories" msgstr "Mountain Time - Zentral Northwest Territories" #. generated from zone.tab msgid "Mountain Time - south Idaho & east Oregon" msgstr "Mountain Time - Süd-Idaho & Ost-Oregon" #. generated from zone.tab msgid "Mountain Time - west Northwest Territories" msgstr "Mountain Time - westliches Northwest Territories" #. generated from zone.tab msgid "NE Brazil (MA, PI, CE, RN, PB)" msgstr "Nord-Ost Brasilien (MA, PI, CE, RN, PR)" #. generated from zone.tab msgid "New South Wales - Yancowinna" msgstr "New South Wales - Yancowinna" #. generated from zone.tab msgid "New South Wales - most locations" msgstr "New South Wales - die meisten Orte" #. generated from zone.tab msgid "Newfoundland Island" msgstr "Neufundland" #. generated from zone.tab msgid "Northern Ireland" msgstr "Nordirland" #. generated from zone.tab msgid "Northern Territory" msgstr "Northern Territory" #. generated from zone.tab msgid "Pacific Time" msgstr "Pacific Time" #. generated from zone.tab msgid "Pacific Time - north Yukon" msgstr "Pacific Time - Nord-Yukon" #. generated from zone.tab msgid "Pacific Time - south Yukon" msgstr "Pacific Time - Süd-Yukon" #. generated from zone.tab msgid "Pacific Time - west British Columbia" msgstr "Pacific Time - West British Columbia" #. generated from zone.tab msgid "Palmer Station, Anvers Island" msgstr "Palmer Station, Anvers Insel" #. generated from zone.tab msgid "Pernambuco" msgstr "Pernambuco" #. generated from zone.tab msgid "Phoenix Islands" msgstr "Phoenix-Inseln" #. generated from zone.tab msgid "Ponape (Pohnpei)" msgstr "Ponape (Pohnpei)" #. generated from zone.tab msgid "Queensland - Holiday Islands" msgstr "Queensland - Holiday-Insel" #. generated from zone.tab msgid "Queensland - most locations" msgstr "Queensland - die meisten Orte" #. generated from zone.tab msgid "Qyzylorda (Kyzylorda, Kzyl-Orda)" msgstr "Qyzylorda (Kyzylorda, Kzyl-Orda)" #. generated from zone.tab msgid "Roraima" msgstr "Roraima" #. generated from zone.tab msgid "Rothera Station, Adelaide Island" msgstr "Rothera Station, Adelaide Island" #. generated from zone.tab msgid "Ruthenia" msgstr "Ruthenia" #. generated from zone.tab msgid "S & SE Brazil (GO, DF, MG, ES, RJ, SP, PR, SC, RS)" msgstr "Süd & Süd-Ost Brasilien (GO, DF, MG, ES, RJ, SP, PR, SC, RS)" #. generated from zone.tab msgid "Sabah & Sarawak" msgstr "Sabah & Sarawak" #. generated from zone.tab msgid "San Juan (SJ)" msgstr "San Juan (SJ)" #. generated from zone.tab msgid "Santa Cruz (SC)" msgstr "Santa Cruz (SC)" #. generated from zone.tab msgid "Scoresbysund / Ittoqqortoormiit" msgstr "Scoresbysund / Ittoqqortoormiit" #. generated from zone.tab msgid "Society Islands" msgstr "Society Islands" #. generated from zone.tab msgid "South Australia" msgstr "South Australia" #. generated from zone.tab msgid "Svalbard" msgstr "Svalbard" #. generated from zone.tab msgid "Syowa Station, E Ongul I" msgstr "Syowa Station, Ost-Ongul I" #. generated from zone.tab msgid "Tasmania" msgstr "Tasmanien" #. generated from zone.tab msgid "Thule / Pituffik" msgstr "Thule / Pituffik" #. generated from zone.tab msgid "Tibet & most of Xinjiang Uyghur" msgstr "Tibet & der größte Teil von Xinjiang Uyghur" #. generated from zone.tab msgid "Tierra del Fuego (TF)" msgstr "Tierra del Fuego (TF)" #. generated from zone.tab msgid "Tocantins" msgstr "Tocantins" #. generated from zone.tab msgid "Truk (Chuuk)" msgstr "Truk (Chuuk)" #. generated from zone.tab msgid "Tucuman (TM)" msgstr "Tucuman (TM)" #. generated from zone.tab msgid "Victoria" msgstr "Victoria" #. generated from zone.tab msgid "Vostok Station, S Magnetic Pole" msgstr "Vostok Station, Magnetischer Südpol" #. generated from zone.tab msgid "W Amazonas" msgstr "West-Amazonas" #. generated from zone.tab msgid "W Para, Rondonia" msgstr "West-Para, Rondonia" #. generated from zone.tab msgid "Wake Island" msgstr "Wake Insel" #. generated from zone.tab msgid "West Kazakhstan" msgstr "West-Kasachstan" #. generated from zone.tab msgid "Western Australia" msgstr "West-Australien" #. generated from zone.tab msgid "Yap" msgstr "Yap" #. generated from zone.tab msgid "Zaporozh'ye, E Lugansk" msgstr "Zaporozh'ye, Ost Lugansk" #. generated from zone.tab msgid "central China - Gansu, Guizhou, Sichuan, Yunnan, etc." msgstr "Zentral-China - Gansu, Guizhou, Sichuan, Yunnan, etc." #. generated from zone.tab msgid "central Crimea" msgstr "Zentral Crimea" #. generated from zone.tab msgid "east & south Borneo, Celebes, Bali, Nusa Tengarra, west Timor" msgstr "Ost & Süd-Borneo, Celebes, Bali, Nusa Tengarra, West-Timor" #. generated from zone.tab msgid "east China - Beijing, Guangdong, Shanghai, etc." msgstr "Ost-China - Beijing, Guangdong, Shanghai, etc." #. generated from zone.tab msgid "east Dem. Rep. of Congo" msgstr "Osten, Republik Kongo " #. generated from zone.tab msgid "east Uzbekistan" msgstr "Ost-Uzbekistan" #. generated from zone.tab msgid "east coast, north of Scoresbysund" msgstr "Ostküste, Norden von Scoresbysund" #. generated from zone.tab msgid "mainland" msgstr "Festland" #. generated from zone.tab msgid "most locations" msgstr "die meisten Orte" #. generated from zone.tab msgid "most locations (CB, CC, CN, ER, FM, LP, MN, NQ, RN, SA, SE, SF, SL)" msgstr "die meisten Orte (CB, CC, CN, ER, FM, LP, MN, NQ, RN, SA, SE, SF, SL)" #. generated from zone.tab msgid "northeast Mali" msgstr "Nord-Ost Mali" #. generated from zone.tab msgid "peninsular Malaysia" msgstr "Halbinsel Malaysien" #. generated from zone.tab msgid "southwest Mali" msgstr "Süd-West Mali" #. generated from zone.tab msgid "southwest Xinjiang Uyghur" msgstr "Südwest Xinjiang Uyghur" #. generated from zone.tab msgid "west & central Borneo" msgstr "West & Zentral-Borneo" #. generated from zone.tab msgid "west Dem. Rep. of Congo" msgstr "West-Kongo " #. generated from zone.tab msgid "west Uzbekistan" msgstr "West-Usbekistan" #. generated from lang-table msgid "Afrikaans" msgstr "Afrikaans" #. generated from lang-table msgid "Amharic" msgstr "Amharisch" #. generated from lang-table msgid "Arabic" msgstr "Arabisch" #. generated from lang-table msgid "Bengali" msgstr "Bengali" #. generated from lang-table msgid "Bengali(India)" msgstr "Bengali(Indien)" #. generated from lang-table msgid "Bulgarian" msgstr "Bulgarisch" #. generated from lang-table msgid "Catalan" msgstr "Katalanisch" #. generated from lang-table msgid "Chinese(Simplified)" msgstr "Chinesisch (vereinfacht)" #. generated from lang-table msgid "Chinese(Traditional)" msgstr "Chinesisch (traditionell)" #. generated from lang-table msgid "Croatian" msgstr "Kroatisch" #. generated from lang-table msgid "Czech" msgstr "Tschechisch" #. generated from lang-table msgid "Danish" msgstr "Dänisch" #. generated from lang-table msgid "Dutch" msgstr "Holländisch" #. generated from lang-table msgid "English" msgstr "Englisch" #. generated from lang-table msgid "Estonian" msgstr "Estnisch" #. generated from lang-table msgid "Finnish" msgstr "Finnisch" #. generated from lang-table msgid "French" msgstr "Französisch" #. generated from lang-table msgid "German" msgstr "Deutsch" #. generated from lang-table msgid "Gujarati" msgstr "Gujarati" #. generated from lang-table msgid "Hindi" msgstr "Hindi" #. generated from lang-table msgid "Hungarian" msgstr "Ungarisch" #. generated from lang-table msgid "Icelandic" msgstr "Isländisch" #. generated from lang-table msgid "Indonesian" msgstr "Indonesisch" #. generated from lang-table msgid "Italian" msgstr "Italienisch" #. generated from lang-table msgid "Japanese" msgstr "Japanisch" #. generated from lang-table msgid "Korean" msgstr "Koreanisch" #. generated from lang-table msgid "Macedonian" msgstr "Mazedonisch" #. generated from lang-table msgid "Malay" msgstr "Malaiisch" #. generated from lang-table msgid "Norwegian" msgstr "Norwegisch" #. generated from lang-table msgid "Northern Sotho" msgstr "Northern Sotho" #. generated from lang-table msgid "Persian" msgstr "Persisch" #. generated from lang-table msgid "Polish" msgstr "Polnisch" #. generated from lang-table msgid "Portuguese" msgstr "Portugiesisch" #. generated from lang-table msgid "Portuguese(Brazilian)" msgstr "Portugiesisch(Brasilianisch)" #. generated from lang-table msgid "Punjabi" msgstr "Punjabi" #. generated from lang-table msgid "Russian" msgstr "Russisch" #. generated from lang-table msgid "Slovak" msgstr "Slowakisch" #. generated from lang-table msgid "Slovenian" msgstr "Slowenisch" #. generated from lang-table msgid "Spanish" msgstr "Spanisch" #. generated from lang-table msgid "Swedish" msgstr "Schwedisch" #. generated from lang-table msgid "Tamil" msgstr "Tamilisch" #. generated from lang-table msgid "Thai" msgstr "Thai" #. generated from lang-table msgid "Turkish" msgstr "Türkisch" #. generated from lang-table msgid "Ukrainian" msgstr "Ukrainisch" #. generated from lang-table msgid "Vietnamese" msgstr "Vietnamesisch" #. generated from lang-table msgid "Welsh" msgstr "Walisisch" #. generated from lang-table msgid "Zulu" msgstr "Zulu"