# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: anaconda-text 1.0\n" "POT-Creation-Date: 1999-09-13 14:19-0400\n" "PO-Revision-Date: 1999-07-29 17:11-0400\n" "Last-Translator: Matt Wilson \n" "Language-Team: German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=iso-9958-1\n" "Content-Transfer-Encoding: 8bit\n" #: ../iw/language.py:10 ../text.py:39 ../text.py:818 msgid "Language Selection" msgstr "Wählen Sie eine Sprache aus" #: ../text.py:40 msgid "What language would you like to use during the installation process?" msgstr "" #: ../loader/cdrom.c:34 ../loader/devices.c:58 ../loader/devices.c:134 #: ../loader/kickstart.c:56 ../loader/kickstart.c:66 ../loader/kickstart.c:105 #: ../loader/lang.c:247 ../loader/lang.c:503 ../loader/loader.c:239 #: ../loader/loader.c:451 ../loader/loader.c:461 ../loader/loader.c:608 #: ../loader/loader.c:663 ../loader/loader.c:708 ../loader/loader.c:841 #: ../loader/loader.c:846 ../loader/loader.c:932 ../loader/loader.c:1065 #: ../loader/loader.c:1387 ../loader/net.c:162 ../loader/net.c:284 #: ../loader/net.c:559 ../loader/urls.c:124 ../loader/urls.c:201 #: ../loader/urls.c:206 ../loader/urls.c:322 ../text.py:42 ../text.py:90 #: ../text.py:141 ../text.py:167 ../text.py:208 ../text.py:253 ../text.py:343 #: ../text.py:363 ../text.py:394 ../text.py:435 ../text.py:457 ../text.py:522 #: ../text.py:542 ../text.py:554 ../text.py:566 ../text.py:744 ../text.py:787 #: ../text.py:791 ../textw/lilo.py:20 ../textw/lilo.py:64 #: ../textw/packages.py:22 ../textw/packages.py:87 ../textw/packages.py:138 #: ../textw/partitioning.py:172 ../textw/userauth.py:31 #: ../textw/userauth.py:45 ../textw/userauth.py:50 ../textw/userauth.py:84 #: ../textw/userauth.py:96 ../textw/userauth.py:104 ../textw/userauth.py:113 #: ../textw/userauth.py:174 ../textw/userauth.py:246 msgid "OK" msgstr "" #: ../text.py:54 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "" #: ../text.py:55 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "" #: ../text.py:56 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "" #: ../text.py:57 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "" #: ../iw/lilo.py:174 ../text.py:72 ../textw/lilo.py:77 ../textw/lilo.py:135 msgid "Device" msgstr "" #: ../text.py:73 #, c-format msgid "What device is your mouse located on? %s %i" msgstr "" #. code to create dialog in gtk+ #: ../libfdisk/fsedit.c:605 ../libfdisk/fsedit.c:612 ../libfdisk/fsedit.c:619 #: ../libfdisk/fsedit.c:628 ../libfdisk/fsedit.c:640 ../libfdisk/fsedit.c:650 #: ../libfdisk/fsedit.c:679 ../libfdisk/fsedit.c:695 ../libfdisk/fsedit.c:1048 #: ../libfdisk/gnomefsedit.c:655 ../libfdisk/gnomefsedit.c:1000 #: ../libfdisk/gnomefsedit.c:1026 ../libfdisk/gnomefsedit.c:1062 #: ../libfdisk/gnomefsedit.c:1267 ../libfdisk/gnomefsedit.c:1361 #: ../libfdisk/gnomefsedit.c:1379 ../libfdisk/gnomefsedit.c:1619 #: ../libfdisk/gnomefsedit.c:1846 ../libfdisk/gnomefsedit.c:1854 #: ../libfdisk/gnomefsedit.c:1868 ../libfdisk/gnomefsedit.c:1879 #: ../libfdisk/gnomefsedit.c:1886 ../libfdisk/gnomefsedit.c:1901 #: ../libfdisk/gnomefsedit.c:1910 ../libfdisk/gnomefsedit.c:1967 #: ../libfdisk/gnomefsedit.c:2128 ../libfdisk/newtfsedit.c:116 #: ../libfdisk/newtfsedit.c:449 ../libfdisk/newtfsedit.c:527 #: ../libfdisk/newtfsedit.c:545 ../libfdisk/newtfsedit.c:581 #: ../libfdisk/newtfsedit.c:1297 ../libfdisk/newtfsedit.c:1305 #: ../libfdisk/newtfsedit.c:1430 ../libfdisk/newtfsedit.c:1451 #: ../libfdisk/newtfsedit.c:1545 ../text.py:74 ../text.py:469 #: ../textw/constants.py:10 ../textw/lilo.py:82 ../textw/lilo.py:95 #: ../textw/lilo.py:150 msgid "Ok" msgstr "" #: ../gui.py:316 ../libfdisk/fsedit.c:955 ../libfdisk/newtfsedit.c:1297 #: ../libfdisk/newtfsedit.c:1305 ../loader/cdrom.c:34 ../loader/devices.c:58 #: ../loader/devices.c:134 ../loader/lang.c:503 ../loader/loader.c:239 #: ../loader/loader.c:572 ../loader/loader.c:608 ../loader/loader.c:708 #: ../loader/loader.c:1065 ../loader/net.c:162 ../loader/net.c:284 #: ../loader/urls.c:124 ../loader/urls.c:322 ../text.py:74 ../text.py:75 #: ../text.py:90 ../text.py:113 ../text.py:141 ../text.py:144 ../text.py:167 #: ../text.py:194 ../text.py:208 ../text.py:210 ../text.py:229 ../text.py:231 #: ../text.py:253 ../text.py:255 ../text.py:343 ../text.py:394 ../text.py:396 #: ../text.py:415 ../text.py:424 ../text.py:435 ../text.py:437 ../text.py:457 #: ../text.py:460 ../text.py:469 ../text.py:522 ../text.py:523 ../text.py:744 #: ../text.py:766 ../textw/constants.py:10 ../textw/lilo.py:21 #: ../textw/lilo.py:64 ../textw/lilo.py:71 ../textw/lilo.py:151 #: ../textw/packages.py:22 ../textw/packages.py:87 ../textw/packages.py:138 #: ../textw/packages.py:147 ../textw/partitioning.py:26 #: ../textw/partitioning.py:63 ../textw/partitioning.py:172 #: ../textw/userauth.py:31 ../textw/userauth.py:143 ../textw/userauth.py:174 #: ../textw/userauth.py:246 msgid "Back" msgstr "" #: ../text.py:92 msgid "Which model mouse is attached to this computer?" msgstr "" #: ../text.py:101 msgid "Emulate 3 Buttons?" msgstr "" #: ../text.py:103 #, fuzzy msgid "Mouse Selection" msgstr "Wählen Sie eine Sprache aus" #: ../text.py:139 ../text.py:820 #, fuzzy msgid "Keyboard Selection" msgstr "Wählen Sie eine Sprache aus" #: ../text.py:140 msgid "Which model keyboard is attached to this computer?" msgstr "" #: ../text.py:160 msgid "Install GNOME Workstation" msgstr "" #: ../text.py:161 msgid "Install KDE Workstation" msgstr "" #: ../text.py:162 msgid "Install Server System" msgstr "" #: ../text.py:163 msgid "Install Custom System" msgstr "" #: ../text.py:164 msgid "Upgrade Existing Installation" msgstr "" #: ../text.py:165 ../text.py:823 msgid "Installation Type" msgstr "" #: ../text.py:166 msgid "What type of system would you like to install?" msgstr "" #: ../libfdisk/newtfsedit.c:1545 ../loader/loader.c:451 ../loader/loader.c:461 #: ../loader/loader.c:663 ../loader/loader.c:708 ../loader/loader.c:841 #: ../loader/loader.c:846 ../loader/loader.c:1387 ../loader/urls.c:201 #: ../loader/urls.c:206 ../text.py:191 ../text.py:562 msgid "Error" msgstr "" #: ../text.py:192 msgid "You don't have any Linux partitions. You can't upgrade this system!" msgstr "" #: ../text.py:205 msgid "System to Upgrade" msgstr "" #: ../text.py:206 msgid "What partition holds the root partition of your installation?" msgstr "" #: ../text.py:221 msgid "Customize Packages to Upgrade" msgstr "" #: ../text.py:222 msgid "" "The packages you have installed, and any other packages which are needed to " "satisfy their dependencies, have been selected for installation. Would you " "like to customize the set of packages that will be upgraded?" msgstr "" #: ../libfdisk/gnomefsedit.c:580 ../libfdisk/gnomefsedit.c:956 #: ../libfdisk/gnomefsedit.c:1080 ../libfdisk/gnomefsedit.c:2020 #: ../libfdisk/gnomefsedit.c:2290 ../libfdisk/gnomefsedit.c:2343 #: ../libfdisk/newtfsedit.c:486 ../libfdisk/newtfsedit.c:697 #: ../libfdisk/newtfsedit.c:1483 ../libfdisk/newtfsedit.c:1501 #: ../libfdisk/newtfsedit.c:1586 ../loader/loader.c:572 ../loader/net.c:698 #: ../text.py:229 ../text.py:415 ../text.py:418 ../textw/partitioning.py:135 msgid "Yes" msgstr "" #: ../libfdisk/gnomefsedit.c:580 ../libfdisk/gnomefsedit.c:956 #: ../libfdisk/gnomefsedit.c:1080 ../libfdisk/gnomefsedit.c:2020 #: ../libfdisk/gnomefsedit.c:2290 ../libfdisk/gnomefsedit.c:2343 #: ../libfdisk/newtfsedit.c:486 ../libfdisk/newtfsedit.c:697 #: ../libfdisk/newtfsedit.c:1483 ../libfdisk/newtfsedit.c:1501 #: ../libfdisk/newtfsedit.c:1586 ../loader/net.c:698 ../text.py:229 #: ../text.py:234 ../text.py:415 ../text.py:421 ../textw/partitioning.py:135 msgid "No" msgstr "" #: ../text.py:244 msgid "Red Hat Linux" msgstr "Red Hat Linux/German" #: ../text.py:245 msgid "" "Welcome to Red Hat Linux!\n" "\n" "This installation process is outlined in detail in the Official Red Hat " "Linux Installation Guide available from Red Hat Software. If you have access " "to this manual, you should read the installation section before continuing.\n" "\n" "If you have purchased Official Red Hat Linux, be sure to register your " "purchase through our web site, http://www.redhat.com/." msgstr "" "Willkommen bei Red Hat Linux!\n" "\n" "Dieser Installationsvorgang wird ausführlich im offiziellen Red Hat Linux " "Installationshandbuch beschrieben, das bei Red Hat Software erhältlich ist. " "Wenn Sie Zugriff auf dieses Handbuch haben, sollten Sie den Abschnitt über " "die Installation lesen, bevor Sie fortfahren.\n" "\n" "Wenn Sie die offizielle Red Hat Linux Distribution erworben haben, " "registrieren Sie sie auf unserer Web-Site unter http://www.redhat.com/." #: ../text.py:315 msgid "Use bootp/dhcp" msgstr "" #: ../loader/net.c:234 ../text.py:320 msgid "IP address:" msgstr "" #: ../loader/net.c:237 ../text.py:321 msgid "Netmask:" msgstr "" #: ../loader/net.c:240 ../text.py:322 msgid "Default gateway (IP):" msgstr "" #: ../loader/net.c:243 ../text.py:323 msgid "Primary nameserver:" msgstr "" #: ../text.py:345 msgid "Network Configuration" msgstr "" #: ../text.py:361 msgid "Invalid information" msgstr "" #: ../text.py:362 msgid "You must enter valid IP information to continue" msgstr "" #: ../text.py:390 msgid "Hostname Configuration" msgstr "" #: ../text.py:391 msgid "" "The hostname is the name of your computer. If your computer is attached to " "a network, this may be assigned by your network administrator." msgstr "" #: ../iw/network.py:187 ../loader/net.c:460 ../loader/net.c:617 ../text.py:394 msgid "Hostname" msgstr "" #: ../text.py:405 ../text.py:550 ../text.py:875 msgid "Bootdisk" msgstr "" #: ../text.py:406 msgid "" "A custom bootdisk provides a way of booting into your Linux system without " "depending on the normal bootloader. This is useful if you don't want to " "install lilo on your system, another operating system removes lilo, or lilo " "doesn't work with your hardware configuration. A custom bootdisk can also be " "used with the Red Hat rescue image, making it much easier to recover from " "severe system failures.\n" "\n" "Would you like to create a bootdisk for your system?" msgstr "" #: ../text.py:433 msgid "X probe results" msgstr "" #: ../text.py:446 ../text.py:465 msgid "Unlisted Card" msgstr "" #: ../text.py:454 #, fuzzy msgid "Video Card Selection" msgstr "Wählen Sie eine Sprache aus" #: ../text.py:455 msgid "Which video card do you have?" msgstr "" #: ../text.py:467 #, fuzzy msgid "X Server Selection" msgstr "Wählen Sie eine Sprache aus" #: ../text.py:467 msgid "Choose a server" msgstr "" #: ../text.py:518 msgid "Installation to begin" msgstr "" #: ../text.py:519 msgid "" "A complete log of your installation will be in /tmp/install.log after " "rebooting your system. You may want to keep this file for later reference." msgstr "" #: ../text.py:534 msgid "Complete" msgstr "" #: ../iw/congrats.py:17 ../text.py:535 msgid "" "Congratulations, installation is complete.\n" "\n" "Remove the boot media and press return to reboot. For information on fixes " "which are available for this release of Red Hat Linux, consult the Errata " "available from http://www.redhat.com.\n" "\n" "Information on configuring your system is available in the post install " "chapter of the Official Red Hat Linux User's Guide." msgstr "" #: ../iw/bootdisk.py:40 ../text.py:551 msgid "" "Insert a blank floppy in the first floppy drive. All data on this disk will " "be erased during creation of the boot disk." msgstr "" #: ../text.py:554 ../text.py:555 ../text.py:566 ../text.py:567 #: ../textw/lilo.py:20 msgid "Skip" msgstr "" #: ../iw/bootdisk.py:44 ../text.py:563 msgid "" "An error occured while making the boot disk. Please make sure that there is " "a formatted floppy in the first floppy drive." msgstr "" #: ../text.py:625 msgid "Package Installation" msgstr "" #: ../text.py:627 msgid "Name : " msgstr "Name :" #: ../text.py:628 msgid "Size : " msgstr "Größe :" #: ../text.py:629 msgid "Summary: " msgstr "Zusammenfassung:" #: ../text.py:655 msgid " Packages" msgstr "" #: ../text.py:656 msgid " Bytes" msgstr "" #: ../text.py:657 msgid " Time" msgstr "" #: ../text.py:659 msgid "Total :" msgstr "" #: ../text.py:666 msgid "Completed: " msgstr "" #: ../text.py:676 msgid "Remaining: " msgstr "" #: ../text.py:746 msgid "What time zone are you located in?" msgstr "" #: ../text.py:754 msgid "Hardware clock set to GMT?" msgstr "" #: ../iw/timezone.py:29 ../text.py:756 #, fuzzy msgid "Time Zone Selection" msgstr "Wählen Sie eine Sprache aus" #: ../text.py:791 ../text.py:792 msgid "Debug" msgstr "" #: ../text.py:804 msgid "Red Hat Linux (C) 1999 Red Hat, Inc." msgstr "" #: ../text.py:806 msgid "" " / between elements | selects | next " "screen" msgstr "" #: ../text.py:822 msgid "Welcome" msgstr "" #: ../iw/lilo.py:94 ../iw/lilo.py:197 ../text.py:828 ../text.py:834 msgid "Partition" msgstr "" #: ../text.py:830 msgid "Manually Partition" msgstr "" #: ../text.py:832 msgid "Automatic Partition" msgstr "" #: ../text.py:836 msgid "Swap" msgstr "" #: ../text.py:838 msgid "Filesystem Formatting" msgstr "" #: ../text.py:840 ../text.py:842 ../text.py:844 ../textw/lilo.py:23 #: ../textw/lilo.py:61 ../textw/lilo.py:158 msgid "LILO Configuration" msgstr "" #: ../text.py:846 msgid "Hostname Setup" msgstr "" #: ../text.py:848 msgid "Network Setup" msgstr "" #: ../text.py:850 ../text.py:852 msgid "Mouse Configuration" msgstr "" #: ../text.py:854 msgid "Time Zone Setup" msgstr "" #: ../text.py:856 ../textw/userauth.py:10 msgid "Root Password" msgstr "" #: ../text.py:858 ../textw/userauth.py:150 msgid "User Account Setup" msgstr "" #: ../text.py:860 msgid "Authentication" msgstr "" #: ../text.py:862 msgid "Package Groups" msgstr "" #: ../text.py:864 ../text.py:885 msgid "Individual Packages" msgstr "" #: ../text.py:866 ../textw/packages.py:116 msgid "Package Dependencies" msgstr "" #: ../iw/xconfig.py:91 ../text.py:868 ../text.py:876 msgid "X Configuration" msgstr "" #: ../text.py:870 msgid "Boot Disk" msgstr "" #: ../text.py:872 msgid "Installation Begins" msgstr "" #: ../text.py:874 msgid "Install System" msgstr "" #: ../text.py:878 msgid "Installation Complete" msgstr "" #: ../text.py:883 msgid "Examine System" msgstr "" #: ../text.py:884 msgid "Customize Upgrade" msgstr "" #: ../text.py:886 msgid "Upgrade System" msgstr "" #: ../text.py:887 msgid "Upgrade Complete" msgstr "" #: ../gui.py:310 #, fuzzy msgid "Red Hat Linux Installer" msgstr "Red Hat Linux/German" #: ../gui.py:319 msgid "Finish" msgstr "" #: ../gui.py:320 msgid "Hide Help" msgstr "" #: ../gui.py:321 msgid "Show Help" msgstr "" #: ../gui.py:343 msgid "Online Help" msgstr "" #: ../iw/account.py:14 msgid "Account Configuration" msgstr "" #: ../iw/account.py:121 msgid "Root Password: " msgstr "" #: ../iw/account.py:124 msgid "Confirm: " msgstr "" #: ../iw/account.py:175 ../iw/account.py:218 msgid "Account Name" msgstr "" #: ../iw/account.py:179 ../textw/userauth.py:82 msgid "Password" msgstr "" #: ../iw/account.py:183 ../textw/userauth.py:83 msgid "Password (confirm)" msgstr "" #: ../iw/account.py:187 ../iw/account.py:218 ../textw/userauth.py:81 #: ../textw/userauth.py:162 msgid "Full Name" msgstr "" #: ../iw/account.py:196 ../libfdisk/newtfsedit.c:1303 ../textw/userauth.py:173 msgid "Add" msgstr "" #: ../iw/account.py:198 ../libfdisk/newtfsedit.c:1296 #: ../libfdisk/newtfsedit.c:1304 ../textw/lilo.py:150 ../textw/lilo.py:171 #: ../textw/partitioning.py:62 ../textw/userauth.py:174 msgid "Edit" msgstr "" #: ../iw/account.py:200 ../libfdisk/newtfsedit.c:1296 #: ../libfdisk/newtfsedit.c:1304 ../textw/userauth.py:173 msgid "Delete" msgstr "" #: ../iw/account.py:202 msgid "New" msgstr "" #: ../iw/auth.py:11 ../textw/userauth.py:248 msgid "Authentication Configuration" msgstr "" #: ../iw/auth.py:50 msgid "Enable MD5 passwords" msgstr "" #: ../iw/auth.py:51 msgid "Enable shadow passwords" msgstr "" #: ../iw/auth.py:53 ../textw/userauth.py:253 msgid "Enable NIS" msgstr "" #: ../iw/auth.py:54 msgid "Use broadcast to find NIS server" msgstr "" #: ../iw/auth.py:66 msgid "NIS Domain: " msgstr "" #: ../iw/auth.py:68 msgid "NIS Server: " msgstr "" #: ../iw/bootdisk.py:10 msgid "Bootdisk Creation" msgstr "" #: ../iw/bootdisk.py:51 msgid "Skip boot disk creation" msgstr "" #: ../iw/congrats.py:11 msgid "Congratulations" msgstr "" #: ../iw/congrats.py:13 msgid "Exit" msgstr "" #: ../iw/dependencies.py:9 msgid "Unresolved Dependencies" msgstr "" #: ../iw/dependencies.py:29 ../iw/progress.py:113 ../textw/packages.py:123 msgid "Package" msgstr "" #: ../iw/dependencies.py:29 ../textw/packages.py:123 msgid "Requirement" msgstr "" #: ../iw/dependencies.py:36 ../textw/packages.py:135 msgid "Install packages to satisfy dependencies" msgstr "" #: ../iw/examine.py:11 msgid "Upgrade Examine" msgstr "" #: ../iw/examine.py:35 msgid "" "You don't have any Linux partitions.\n" " You can't upgrade this sytem!" msgstr "" #: ../iw/examine.py:53 msgid "Customize packages to be upgraded" msgstr "" #: ../iw/fdisk.py:11 ../textw/partitioning.py:25 msgid "fdisk" msgstr "" #: ../iw/fdisk.py:42 msgid "Select drive to run fdisk on" msgstr "" #: ../iw/format.py:12 msgid "Choose partitions to Format" msgstr "" #: ../iw/format.py:47 msgid "Check for bad blocks while formatting" msgstr "" #: ../iw/installpath.py:35 msgid "GNOME Workstation" msgstr "" #: ../iw/installpath.py:36 msgid "KDE Workstation" msgstr "" #: ../iw/installpath.py:37 ../libfdisk/gnomefsedit.c:2196 #: ../libfdisk/gnomefsedit.c:2216 msgid "Server" msgstr "" #: ../iw/installpath.py:38 msgid "Custom" msgstr "" #: ../iw/installpath.py:74 msgid "Install Type" msgstr "" #: ../iw/installpath.py:142 msgid "Install" msgstr "" #: ../iw/installpath.py:144 msgid "Upgrade" msgstr "" #: ../iw/installpath.py:183 msgid "Use fdisk to format drives" msgstr "" #: ../iw/keyboard.py:11 msgid "Keyboard Configuration" msgstr "" #: ../iw/keyboard.py:35 msgid "Model" msgstr "" #: ../iw/keyboard.py:47 msgid "Layout" msgstr "" #: ../iw/keyboard.py:61 msgid "Variant" msgstr "" #: ../iw/language.py:14 ../loader/lang.c:245 msgid "What language should be used during the installation process?" msgstr "" #: ../iw/lilo.py:18 msgid "Lilo Configuration" msgstr "" #: ../iw/lilo.py:99 ../iw/lilo.py:198 msgid "Type" msgstr "" #: ../iw/lilo.py:128 msgid "Install LILO boot record on:" msgstr "" #: ../iw/lilo.py:133 msgid "Master Boot Record (MBR)" msgstr "" #: ../iw/lilo.py:137 msgid "First sector of boot partition" msgstr "" #: ../iw/lilo.py:141 ../textw/lilo.py:18 msgid "Use linear mode (needed for some SCSI drives)" msgstr "" #: ../iw/lilo.py:144 msgid "Kernel parameters" msgstr "" #: ../iw/lilo.py:159 msgid "Create boot disk" msgstr "" #: ../iw/lilo.py:163 msgid "Do not install LILO" msgstr "" #: ../iw/lilo.py:174 ../textw/lilo.py:135 msgid "Default" msgstr "" #: ../iw/lilo.py:174 ../textw/lilo.py:135 msgid "Partition type" msgstr "" #: ../iw/lilo.py:174 ../iw/lilo.py:209 ../textw/lilo.py:78 #: ../textw/lilo.py:135 msgid "Boot label" msgstr "" #: ../iw/network.py:131 msgid "Configure using DHCP" msgstr "" #: ../iw/network.py:138 msgid "Activate on boot" msgstr "" #: ../iw/network.py:147 msgid "IP Address" msgstr "" #: ../iw/network.py:147 ../loader/net.c:615 msgid "Netmask" msgstr "" #: ../iw/network.py:147 ../loader/loader.c:226 msgid "Network" msgstr "" #: ../iw/network.py:147 msgid "Broadcast" msgstr "" #: ../iw/network.py:188 msgid "Gateway" msgstr "" #: ../iw/network.py:188 msgid "Primary DNS" msgstr "" #: ../iw/network.py:188 msgid "Secondary DNS" msgstr "" #: ../iw/network.py:188 msgid "Ternary DNS" msgstr "" #: ../iw/package.py:20 #, fuzzy msgid "Individual Package Selection" msgstr "Wählen Sie eine Sprache aus" #: ../iw/package.py:178 msgid "Up" msgstr "" #: ../iw/package.py:324 #, fuzzy msgid "Name: " msgstr "Name :" #: ../iw/package.py:329 msgid "Package Details" msgstr "" #: ../iw/package.py:335 #, fuzzy msgid "Size: " msgstr "Größe :" #: ../iw/package.py:341 msgid "Select Package For Installation" msgstr "" #: ../iw/package.py:377 ../textw/packages.py:24 ../textw/packages.py:89 msgid "Package Group Selection" msgstr "" #: ../iw/package.py:445 ../textw/packages.py:20 msgid "Select individual packages" msgstr "Einzelne Pakete auswählen" #: ../iw/progress.py:26 msgid "Installing Packages" msgstr "" #: ../iw/progress.py:114 ../iw/progress.py:149 #, fuzzy msgid "Size" msgstr "Größe :" #: ../iw/progress.py:115 #, fuzzy msgid "Summary" msgstr "Zusammenfassung:" #: ../iw/progress.py:149 msgid "Status" msgstr "" #: ../iw/progress.py:149 msgid "Packages" msgstr "" #: ../iw/progress.py:149 msgid "Time" msgstr "" #: ../iw/progress.py:154 msgid "Total" msgstr "" #: ../iw/progress.py:155 msgid "Completed" msgstr "" #: ../iw/progress.py:156 msgid "Remaining" msgstr "" #: ../iw/rootpartition.py:12 msgid "Confirm Partitioning Selection" msgstr "" #: ../iw/rootpartition.py:27 ../textw/partitioning.py:25 msgid "Disk Druid" msgstr "" #: ../iw/rootpartition.py:86 ../textw/partitioning.py:97 msgid "Automatic Partitioning" msgstr "" #: ../iw/rootpartition.py:125 ../textw/partitioning.py:98 #, c-format msgid "" "%s\n" "\n" "If you don't want to do this, you can continue with this install by " "partitioning manually, or you can go back and perform a fully customized " "installation." msgstr "" #: ../iw/rootpartition.py:137 msgid "Remove data" msgstr "" #: ../iw/rootpartition.py:140 ../textw/partitioning.py:102 msgid "Manually partition" msgstr "" #: ../iw/timezone.py:110 msgid "View:" msgstr "" #: ../iw/timezone.py:140 msgid "Use Daylight Saving Time" msgstr "" #: ../iw/timezone.py:147 msgid "Location" msgstr "" #: ../iw/timezone.py:148 msgid "UTC Offset" msgstr "" #: ../iw/timezone.py:152 msgid "System clock uses UTC" msgstr "" #: ../iw/xconfig.py:9 msgid "Video Card" msgstr "" #: ../iw/xconfig.py:10 msgid "Monitor" msgstr "" #: ../iw/xconfig.py:11 msgid "Video Ram" msgstr "" #: ../iw/xconfig.py:12 msgid "Horizontal Frequency Range" msgstr "" #: ../iw/xconfig.py:13 msgid "Vertical Frequency Range" msgstr "" #: ../iw/xconfig.py:14 msgid "Test failed" msgstr "" #: ../iw/xconfig.py:22 ../iw/xconfig.py:198 msgid "Customize X Configuration" msgstr "" #: ../iw/xconfig.py:63 msgid "Bits per Pixel" msgstr "" #: ../iw/xconfig.py:73 ../iw/xconfig.py:194 msgid "Test this configuration" msgstr "" #: ../iw/xconfig.py:149 msgid "" "In most cases your video hardware can be probed to automatically determine " "the best settings for your display." msgstr "" #: ../iw/xconfig.py:157 msgid "Autoprobe results:" msgstr "" #: ../iw/xconfig.py:171 msgid "" "Your monitor could not be autodetected. Please choose it from the list below:" msgstr "" #: ../iw/xconfig.py:201 msgid "Use Graphical Login" msgstr "" #: ../iw/xconfig.py:203 msgid "Skip X Configuration" msgstr "" #: ../textw/lilo.py:12 msgid "" "A few systems will need to pass special options to the kernel at boot time " "for the system to function properly. If you need to pass boot options to the " "kernel, enter them now. If you don't need any or aren't sure, leave this " "blank." msgstr "" #: ../textw/lilo.py:62 msgid "Where do you want to install the bootloader?" msgstr "" #: ../textw/lilo.py:82 ../textw/lilo.py:102 msgid "Clear" msgstr "" #: ../libfdisk/gnomefsedit.c:655 ../libfdisk/gnomefsedit.c:1619 #: ../libfdisk/gnomefsedit.c:2128 ../libfdisk/newtfsedit.c:450 #: ../libfdisk/newtfsedit.c:1501 ../textw/lilo.py:82 ../textw/lilo.py:100 #: ../textw/userauth.py:64 msgid "Cancel" msgstr "" #: ../textw/lilo.py:90 msgid "Edit Boot Label" msgstr "" #: ../textw/lilo.py:153 msgid "" "The boot manager Red Hat uses can boot other operating systems as well. You " "need to tell me what partitions you would like to be able to boot and what " "label you want to use for each of them." msgstr "" #: ../textw/packages.py:117 msgid "" "Some of the packages you have selected to install require packages you have " "not selected. If you just select Ok all of those required packages will be " "installed." msgstr "" #: ../textw/partitioning.py:17 ../textw/partitioning.py:56 msgid "Disk Setup" msgstr "" #: ../textw/partitioning.py:18 msgid "" "Disk Druid is a tool for partitioning and setting up mount points. It is " "designed to be easier to use than Linux's traditional disk partitioning " "sofware, fdisk, as well as more powerful. However, there are some cases " "where fdisk may be preferred.\n" "\n" "Which tool would you like to use?" msgstr "" #: ../textw/partitioning.py:57 msgid "" "To install Red Hat Linux, you must have at least one partition of 150 MB " "dedicated to Linux. We suggest placing that partition on one of the first " "two hard drives in your system so you can boot into Linux with LILO." msgstr "" #: ../loader/loader.c:287 ../loader/loader.c:311 ../textw/partitioning.py:62 msgid "Done" msgstr "" #: ../textw/partitioning.py:102 ../textw/partitioning.py:103 msgid "Continue" msgstr "" #: ../textw/partitioning.py:130 msgid "Low Memory" msgstr "" #: ../textw/partitioning.py:131 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that okay?" msgstr "" #: ../textw/partitioning.py:150 msgid "" "What partitions would you like to format? We strongly suggest formatting all " "of the system partitions, including /, /usr, and /var. There is no need to " "format /home or /usr/local if they have already been configured during a " "previous install." msgstr "" #: ../textw/partitioning.py:170 msgid "Check for bad blocks during format" msgstr "" #: ../textw/partitioning.py:174 msgid "Choose Partitions to Format" msgstr "" #: ../textw/userauth.py:12 msgid "" "Pick a root password. You must type it twice to ensure you know what it is " "and didn't make a mistake in typing. Remember that the root password is a " "critical part of system security!" msgstr "" #: ../loader/urls.c:298 ../textw/userauth.py:25 msgid "Password:" msgstr "" #: ../textw/userauth.py:26 msgid "Password (again):" msgstr "" #: ../textw/userauth.py:42 ../textw/userauth.py:93 msgid "Password Length" msgstr "" #: ../textw/userauth.py:43 msgid "The root password must be at least 6 characters long." msgstr "" #: ../textw/userauth.py:47 ../textw/userauth.py:101 msgid "Password Mismatch" msgstr "" #: ../textw/userauth.py:48 ../textw/userauth.py:102 msgid "The passwords you entered were different. Please try again." msgstr "" #: ../textw/userauth.py:73 msgid "Edit User" msgstr "" #: ../textw/userauth.py:75 msgid "Add User" msgstr "" #: ../textw/userauth.py:80 msgid "User ID" msgstr "" #: ../textw/userauth.py:94 msgid "The password must be at least 6 characters long." msgstr "" #: ../textw/userauth.py:111 msgid "User Exists" msgstr "" #: ../textw/userauth.py:112 msgid "This user id already exists. Choose another." msgstr "" #: ../textw/userauth.py:139 msgid "" "You should use a normal user account for most activities on your system. By " "not using the root account casually, you'll reduce the chance of disrupting " "your system's configuration." msgstr "" #: ../textw/userauth.py:152 msgid "" "What user account would you like to have on the system? You should have at " "least one non-root account for normal work, but multi-user systems can have " "any number of accounts set up." msgstr "" #: ../textw/userauth.py:162 msgid "User name" msgstr "" #: ../textw/userauth.py:186 msgid "Enter the information for the user." msgstr "" #: ../textw/userauth.py:198 msgid "Change the information for this user." msgstr "" #: ../textw/userauth.py:249 msgid "Use Shadow Passwords" msgstr "" #: ../textw/userauth.py:251 msgid "Enable MD5 Passwords" msgstr "" #: ../textw/userauth.py:258 msgid "NIS Domain:" msgstr "" #: ../textw/userauth.py:260 msgid "NIS Server:" msgstr "" #: ../textw/userauth.py:262 msgid "or use:" msgstr "" #: ../textw/userauth.py:265 msgid "Request server via broadcast" msgstr "" #: ../libfdisk/fsedit.c:605 ../libfdisk/fsedit.c:612 ../libfdisk/fsedit.c:619 #: ../libfdisk/fsedit.c:628 ../libfdisk/fsedit.c:640 ../libfdisk/fsedit.c:650 msgid "Bad Mount Point" msgstr "" #: ../libfdisk/fsedit.c:606 #, c-format msgid "The %s directory must be on the root filesystem." msgstr "" #: ../libfdisk/fsedit.c:613 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points must begin with a leading /." msgstr "" #: ../libfdisk/fsedit.c:620 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may not end with a /." msgstr "" #: ../libfdisk/fsedit.c:629 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may only printable characters." msgstr "" #: ../libfdisk/fsedit.c:641 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "System partitions must be on Linux Native partitions." msgstr "" #: ../libfdisk/fsedit.c:651 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "/usr must be on a Linux Native partition or an NFS volume." msgstr "" #: ../libfdisk/fsedit.c:679 msgid "Too Many Drives" msgstr "" #: ../libfdisk/fsedit.c:680 msgid "" "You have more drives than this program supports. Please use the standard " "fdisk program to setup your drives and please notify Red Hat Software that " "you saw this message." msgstr "" #: ../libfdisk/fsedit.c:695 msgid "No Drives Found" msgstr "" #: ../libfdisk/fsedit.c:696 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem." msgstr "" #: ../libfdisk/fsedit.c:950 #, c-format msgid "" "A disk with a corrupt Sun disklabel has been found while reading block " "device %s. You must use fdisk to create and write a new label to this " "device." msgstr "" #: ../libfdisk/fsedit.c:954 msgid "Corrupt Sun disklabel" msgstr "" #: ../libfdisk/fsedit.c:955 ../libfdisk/fsedit.c:1011 #: ../libfdisk/fsedit.c:1036 msgid "Skip Drive" msgstr "" #: ../libfdisk/fsedit.c:964 ../libfdisk/fsedit.c:1032 #, c-format msgid "" "An error occurred reading the partition table for the block device %s. The " "error was" msgstr "" #: ../libfdisk/fsedit.c:1005 #, c-format msgid "" "The partition table on device %s is corrupted. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive." msgstr "" #: ../libfdisk/fsedit.c:1010 msgid "Bad Partition Table" msgstr "" #: ../libfdisk/fsedit.c:1011 msgid "Initialize" msgstr "" #: ../libfdisk/fsedit.c:1036 ../loader/net.c:329 msgid "Retry" msgstr "" #: ../libfdisk/fsedit.c:1048 msgid "BSD Disklabel" msgstr "" #: ../libfdisk/fsedit.c:1048 msgid "" "A disk with a BSD disklabel has been found. The Red Hat installation only " "supports BSD Disklabels in read-only mode, so you must use a custom install " "and fdisk (instead of Disk Druid) for machines with BSD Disklabels." msgstr "" #: ../libfdisk/fsedit.c:1078 #, c-format msgid "System error %d" msgstr "" #: ../libfdisk/fsedit.c:1087 ../libfdisk/fsedit.c:1089 msgid "Fdisk Error" msgstr "" #: ../libfdisk/gnomefsedit.c:517 ../libfdisk/gnomefsedit.c:686 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:525 ../libfdisk/gnomefsedit.c:688 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:580 ../libfdisk/newtfsedit.c:697 msgid "Delete Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:581 ../libfdisk/newtfsedit.c:698 msgid "Are you sure you want to delete this partition?" msgstr "" #: ../libfdisk/gnomefsedit.c:639 ../libfdisk/gnomefsedit.c:645 #: ../libfdisk/gnomefsedit.c:649 ../libfdisk/gnomefsedit.c:651 #: ../libfdisk/newtfsedit.c:263 ../libfdisk/newtfsedit.c:269 #: ../libfdisk/newtfsedit.c:273 ../libfdisk/newtfsedit.c:275 msgid "Edit Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:666 ../libfdisk/gnomefsedit.c:1628 msgid "Mount Point:" msgstr "" #: ../libfdisk/gnomefsedit.c:701 msgid "Size (Megs):" msgstr "" #: ../libfdisk/gnomefsedit.c:732 msgid "Grow to fill disk?" msgstr "" #: ../libfdisk/gnomefsedit.c:751 ../libfdisk/newtfsedit.c:335 msgid "Allocation Status:" msgstr "" #: ../libfdisk/gnomefsedit.c:755 ../libfdisk/newtfsedit.c:337 msgid "Successful" msgstr "" #: ../libfdisk/gnomefsedit.c:758 ../libfdisk/newtfsedit.c:339 msgid "Failed" msgstr "" #: ../libfdisk/gnomefsedit.c:770 ../libfdisk/newtfsedit.c:344 msgid "Failure Reason:" msgstr "" #: ../libfdisk/gnomefsedit.c:784 ../libfdisk/gnomefsedit.c:1654 msgid "Partition Type:" msgstr "" #: ../libfdisk/gnomefsedit.c:851 msgid "Allowable Drives:" msgstr "" #: ../libfdisk/gnomefsedit.c:956 ../libfdisk/gnomefsedit.c:1846 #: ../libfdisk/newtfsedit.c:486 msgid "No Mount Point" msgstr "" #: ../libfdisk/gnomefsedit.c:957 ../libfdisk/newtfsedit.c:487 msgid "" "You have not selected a mount point for this partition. Are you sure you " "want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1000 ../libfdisk/gnomefsedit.c:1854 #: ../libfdisk/newtfsedit.c:527 msgid "Mount Point Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1001 ../libfdisk/newtfsedit.c:528 msgid "" "The mount point requested is either an illegal path or is already in use. " "Please select a valid mount point." msgstr "" #: ../libfdisk/gnomefsedit.c:1026 ../libfdisk/newtfsedit.c:545 msgid "Size Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1027 ../libfdisk/newtfsedit.c:546 msgid "" "The size requested is illegal. Make sure the size is greater and zero (0), " "and is specified int decimal (base 10) format." msgstr "" #: ../libfdisk/gnomefsedit.c:1062 ../libfdisk/gnomefsedit.c:1967 #: ../libfdisk/newtfsedit.c:581 msgid "Swap Size Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1063 ../libfdisk/gnomefsedit.c:1968 #: ../libfdisk/newtfsedit.c:582 #, c-format msgid "" "You have created a swap partition which is too large. The maximum size of a " "swap partition is %ld Megabytes." msgstr "" #: ../libfdisk/gnomefsedit.c:1079 ../libfdisk/gnomefsedit.c:1086 msgid "No RAID Drive Constraint" msgstr "" #: ../libfdisk/gnomefsedit.c:1081 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive.\n" " Are you sure you want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1087 msgid "Close" msgstr "" #: ../libfdisk/gnomefsedit.c:1088 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive. Please select one drive to constrain this partition to." msgstr "" #. XXXXX - for now destroy the raid entry since it #. now contains unallocated partitions! #: ../libfdisk/gnomefsedit.c:1267 msgid "RAID Entry Incomplete" msgstr "" #: ../libfdisk/gnomefsedit.c:1268 #, c-format msgid "" "The raid device /dev/%s now contains partitions which are unallocated. The " "raid device /dev/%s will now be decomposed into its component partitions. " "Please recompose the raid device with allocated partitions." msgstr "" #. build list of why they all failed #: ../libfdisk/gnomefsedit.c:1361 ../libfdisk/gnomefsedit.c:1380 #: ../libfdisk/newtfsedit.c:84 ../libfdisk/newtfsedit.c:1482 msgid "Unallocated Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:1365 ../libfdisk/gnomefsedit.c:1375 #: ../libfdisk/newtfsedit.c:88 msgid "" "There are currently unallocated partition(s) present in the list of " "requested partitions. The unallocated partition(s) are shown below, along " "with the reason they were not allocated." msgstr "" #: ../libfdisk/gnomefsedit.c:1640 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2382 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2384 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2941 msgid "Unallocated Partitions Exist..." msgstr "" #: ../libfdisk/gnomefsedit.c:2952 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) or a " "RAID partition for the install to proceed." msgstr "" #: ../libfdisk/gnomefsedit.c:2966 ../libfdisk/gnomefsedit.c:2979 msgid "" "You must assign a boot (/boot) partition to a Linux native partition (ext2) " "or a RAID-1 partition for the install to proceed." msgstr "" #: ../libfdisk/gnomefsedit.c:2994 msgid "" "Because you have assigned the root partition (/) to a RAID device, you must " "also assign a boot (/boot) partition to a Linux native partition (ext2) or a " "RAID-1 partition for the install to proceed." msgstr "" #: ../libfdisk/gnomefsedit.c:3067 msgid "Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:3111 msgid "_Add..." msgstr "" #: ../libfdisk/gnomefsedit.c:3123 msgid "_Edit..." msgstr "" #: ../libfdisk/gnomefsedit.c:3124 msgid "_Delete" msgstr "" #: ../libfdisk/gnomefsedit.c:3125 msgid "_Reset" msgstr "" #: ../libfdisk/gnomefsedit.c:3154 msgid "_Make RAID Device" msgstr "" #: ../libfdisk/gnomefsedit.c:3163 msgid "Auto Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:3176 #, fuzzy msgid "Drive Summary" msgstr "Zusammenfassung:" #: ../libfdisk/newtfsedit.c:142 msgid "Swap Partition" msgstr "" #: ../libfdisk/newtfsedit.c:1282 msgid "Current Disk Partitions" msgstr "" #: ../libfdisk/newtfsedit.c:1315 msgid "Drive Summaries" msgstr "" #: ../libfdisk/newtfsedit.c:1430 msgid "No Root Partition" msgstr "" #: ../libfdisk/newtfsedit.c:1431 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) for " "the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1451 msgid "No Swap Partition" msgstr "" #: ../libfdisk/newtfsedit.c:1452 msgid "You must assign a swap partition for the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1484 msgid "" "There are unallocated partitions left. If you quit now they will not be " "written to the disk.\n" "\n" "Are you sure you want to exit?" msgstr "" #: ../libfdisk/newtfsedit.c:1500 msgid "Save Changes" msgstr "" #: ../libfdisk/newtfsedit.c:1502 msgid "Save changes to partition table(s)?" msgstr "" #: ../libfdisk/newtfsedit.c:1546 msgid "You may only delete NFS mounts." msgstr "" #: ../loader/cdrom.c:26 msgid "Other CDROM" msgstr "" #: ../loader/cdrom.c:32 msgid "CDROM type" msgstr "" #: ../loader/cdrom.c:32 msgid "What type of CDROM do you have?" msgstr "" #: ../loader/cdrom.c:88 msgid "Initializing CDROM..." msgstr "" #: ../loader/devices.c:45 msgid "Miscellaneous" msgstr "" #: ../loader/devices.c:54 msgid "Module Parameters" msgstr "" #: ../loader/devices.c:54 msgid "" "This module can take parameters which affects its operation. If you don't " "know what parameters to supply, just skip this screen by pressing the \"OK\" " "button now." msgstr "" #: ../loader/devices.c:120 msgid "Which driver should I try?" msgstr "" #: ../loader/devices.c:135 msgid "Specify module parameters" msgstr "" #: ../loader/devices.c:141 ../loader/loader.c:237 ../loader/loader.c:296 #: ../loader/loader.c:311 msgid "Devices" msgstr "" #: ../loader/kickstart.c:56 ../loader/kickstart.c:66 ../loader/kickstart.c:105 msgid "Kickstart Error" msgstr "" #: ../loader/kickstart.c:57 #, c-format msgid "Error opening: kickstart file %s: %s" msgstr "" #: ../loader/kickstart.c:67 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "" #: ../loader/kickstart.c:106 #, c-format msgid "Error on line %d of kickstart file %s." msgstr "" #: ../loader/lang.c:245 msgid "Choose a Language" msgstr "" #: ../loader/lang.c:501 #, fuzzy msgid "Keyboard Type" msgstr "Wählen Sie eine Sprache aus" #: ../loader/lang.c:502 msgid "What type of keyboard do you have?" msgstr "" #: ../loader/loader.c:98 msgid "Local CDROM" msgstr "" #: ../loader/loader.c:101 msgid "NFS image" msgstr "" #: ../loader/loader.c:106 msgid "Hard drive" msgstr "" #: ../loader/loader.c:122 #, fuzzy msgid "Welcome to Red Hat Linux" msgstr "Red Hat Linux/German" #: ../loader/loader.c:124 msgid "" " / between elements | selects | next screen " msgstr "" #: ../loader/loader.c:226 msgid "SCSI" msgstr "" #: ../loader/loader.c:238 msgid "What kind of device would you like to add" msgstr "" #: ../loader/loader.c:285 msgid "I have found the following devices in your system:" msgstr "" #: ../loader/loader.c:287 ../loader/loader.c:311 msgid "Add Device" msgstr "" #: ../loader/loader.c:312 msgid "" "I don't have any special device drivers loaded for your system. Would you " "like to load some now?" msgstr "" #: ../loader/loader.c:393 ../loader/loader.c:395 msgid "Loading" msgstr "" #: ../loader/loader.c:447 msgid "Loading second stage ramdisk..." msgstr "" #: ../loader/loader.c:451 msgid "Error loading ramdisk." msgstr "" #: ../loader/loader.c:572 msgid "Hard Drives" msgstr "" #: ../loader/loader.c:573 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" #: ../loader/loader.c:586 msgid "" "What partition and directory on that partition hold the RedHat/RPMS and " "RedHat/base directories? If you don't see the disk drive you're using listed " "here, press F2 to configure additional devices." msgstr "" #: ../loader/loader.c:600 msgid "Directory holding Red Hat:" msgstr "" #: ../loader/loader.c:620 msgid "Select Partition" msgstr "" #: ../loader/loader.c:664 #, c-format msgid "Device %s does not appear to contain a Red Hat installation tree." msgstr "" #: ../loader/loader.c:709 msgid "" "I could not find a Red Hat Linux CDROM in any of your CDROM drives. Please " "insert the Red Hat CD and press \"OK\" to retry." msgstr "" #: ../loader/loader.c:842 msgid "That directory does not seem to contain a Red Hat installation tree." msgstr "" #: ../loader/loader.c:847 msgid "I could not mount that directory from the server" msgstr "" #: ../loader/loader.c:932 msgid "FTP" msgstr "" #: ../loader/loader.c:933 msgid "Unable to retrieve the second stage ramdisk" msgstr "" #: ../loader/loader.c:1057 msgid "Rescue Method" msgstr "" #: ../loader/loader.c:1058 msgid "Installation Method" msgstr "" #: ../loader/loader.c:1060 msgid "What type of media contains the rescue image?" msgstr "" #: ../loader/loader.c:1062 msgid "What type of media contains the packages to be installed?" msgstr "" #: ../loader/loader.c:1388 msgid "Cannot find ks.cfg on boot floppy." msgstr "" #: ../loader/loader.c:1500 msgid "PC Card" msgstr "" #: ../loader/loader.c:1500 msgid "Initializing PC Card Devices..." msgstr "" #: ../loader/net.c:147 msgid "NFS server name:" msgstr "" #: ../loader/net.c:150 ../loader/urls.c:160 msgid "Red Hat directory:" msgstr "" #: ../loader/net.c:156 msgid "NFS Setup" msgstr "" #: ../loader/net.c:157 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your NFS server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecture" msgstr "" #: ../loader/net.c:228 msgid "" "Please enter the IP configuration for this machine. Each item should be " "entered as an IP address in dotted-decimal notation (for example, 1.2.3.4)." msgstr "" #: ../loader/net.c:270 msgid "Use dynamic IP configuration (BOOTP/DHCP)" msgstr "" #: ../loader/net.c:298 msgid "Configure TCP/IP" msgstr "" #: ../loader/net.c:329 msgid "Missing Information" msgstr "" #: ../loader/net.c:330 msgid "You must enter both a valid IP address and a netmask." msgstr "" #: ../loader/net.c:338 ../loader/net.c:569 msgid "Dynamic IP" msgstr "" #: ../loader/net.c:339 ../loader/net.c:570 msgid "Sending request for IP information..." msgstr "" #: ../loader/net.c:461 msgid "Determining host name and domain..." msgstr "" #: ../loader/net.c:559 msgid "kickstart" msgstr "" #: ../loader/net.c:560 #, c-format msgid "bad argument to kickstart network command %s: %s" msgstr "" #: ../loader/net.c:607 msgid "Boot protocol to use" msgstr "" #: ../loader/net.c:609 msgid "Network gateway" msgstr "" #: ../loader/net.c:611 msgid "IP address" msgstr "" #: ../loader/net.c:613 msgid "Nameserver" msgstr "" #: ../loader/net.c:620 msgid "Domain name" msgstr "" #: ../loader/net.c:623 msgid "Network device" msgstr "" #: ../loader/net.c:695 msgid "" " / between elements | selects | next " "screen" msgstr "" #: ../loader/net.c:696 #, c-format msgid "netconfig %s (C) 1999 Red Hat, Inc." msgstr "" #: ../loader/net.c:698 msgid "Network configuration" msgstr "" #: ../loader/net.c:699 msgid "Would you like to set up networking?" msgstr "" #: ../loader/urls.c:62 ../loader/urls.c:65 msgid "Retrieving" msgstr "" #: ../loader/urls.c:129 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your FTP server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" #: ../loader/urls.c:138 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your web server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" #: ../loader/urls.c:156 msgid "FTP site name:" msgstr "" #: ../loader/urls.c:157 msgid "Web site name:" msgstr "" #: ../loader/urls.c:176 msgid "Use non-anonymous ftp or a proxy server" msgstr "" #: ../loader/urls.c:180 msgid "Use proxy server" msgstr "" #: ../loader/urls.c:191 msgid "FTP Setup" msgstr "" #: ../loader/urls.c:192 msgid "HTTP Setup" msgstr "" #: ../loader/urls.c:202 msgid "You must enter a server name." msgstr "" #: ../loader/urls.c:207 msgid "You must enter a directory." msgstr "" #: ../loader/urls.c:268 msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below. If you are using an FTP proxy enter the name of the FTP " "proxy server to use." msgstr "" #: ../loader/urls.c:274 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" #: ../loader/urls.c:295 msgid "Account name:" msgstr "" #: ../loader/urls.c:303 msgid "FTP Proxy:" msgstr "" #: ../loader/urls.c:304 msgid "HTTP Proxy:" msgstr "" #: ../loader/urls.c:308 msgid "FTP Proxy Port:" msgstr "" #: ../loader/urls.c:309 msgid "HTTP Proxy Port:" msgstr "" #: ../loader/windows.c:46 msgid "Loading SCSI driver" msgstr "" #, fuzzy #~ msgid "Welcome to Red Hat Linux!" #~ msgstr "Red Hat Linux/German"