msgid "" msgstr "" "Project-Id-Version: Red Hat 7 installer/anaconda\n" "POT-Creation-Date: 2001-01-16 16:09-0500\n" "PO-Revision-Date: 2000-08-19 06:17+01:00\n" "Last-Translator: KC and BL and KS \n" "Language-Team: Danish/Dansk \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-1\n" "Content-Transfer-Encoding: 8-bit\n" #: ../comps.py:457 msgid "Everything" msgstr "Altsammen" #: ../exception.py:13 ../text.py:937 msgid "Exception Occurred" msgstr "Undtagelse hændte" #: ../exception.py:91 msgid "Dump Written" msgstr "" #: ../exception.py:92 msgid "" "Your system's state has been successfully written to the floppy. Your system " "will now be reset." msgstr "" #: ../fstab.py:65 msgid "" "The following partitions are newly created, but you have chosen not to " "format them. This will probably cause an error later in the install.\n" "\n" msgstr "" #: ../fstab.py:73 msgid "" "\n" "\n" "Press OK to continue, or Cancel to go back and select these partitions to be " "formatted (RECOMMENDED)." msgstr "" #: ../fstab.py:74 #, fuzzy msgid "Warning" msgstr "Søger" #: ../fstab.py:300 ../fstab.py:494 ../fstab.py:594 ../fstab.py:798 #: ../harddrive.py:168 ../image.py:61 ../image.py:138 #: ../libfdisk/newtfsedit.c:1729 ../loader/devices.c:236 #: ../loader/devices.c:243 ../loader/devices.c:410 ../loader/devices.c:455 #: ../loader/devices.c:475 ../loader/lang.c:97 ../loader/loader.c:510 #: ../loader/loader.c:520 ../loader/loader.c:574 ../loader/loader.c:893 #: ../loader/loader.c:948 ../loader/loader.c:1118 ../loader/loader.c:1123 #: ../loader/loader.c:1260 ../loader/loader.c:2127 ../loader/loader.c:2173 #: ../loader/loader.c:2249 ../loader/pcmcia.c:114 ../loader/pcmcia.c:131 #: ../loader/urls.c:78 ../loader/urls.c:87 ../loader/urls.c:94 #: ../loader/urls.c:233 ../loader/urls.c:238 ../text.py:368 #: ../textw/bootdisk_text.py:69 ../todo.py:1007 ../todo.py:1020 #: ../todo.py:1392 ../upgrade.py:21 ../upgrade.py:49 msgid "Error" msgstr "Fejl" #: ../fstab.py:301 msgid "" "The kernel is unable to read your new partitioning information, probably " "because you modified extended partitions. While this is not critical, you " "must reboot your machine before proceeding. Insert the Red Hat boot disk now " "and press \"Ok\" to reboot your system.\n" msgstr "" "Kerne er ikke i stand til at læse din nye partitionsinformation, nok fordi " "du har ændret udvidede partitioner. Selvom dette ikke er kritisk, skal du " "genstarte din maskine før du fortsætter. Indsæt Red Hat opstartsdisketten nu " "og tryk 'Ok' for at genstarte dit system\n" #: ../fstab.py:483 ../fstab.py:747 ../fstab.py:1171 msgid "Formatting" msgstr "Formaterer" #: ../fstab.py:484 #, c-format msgid "Formatting swap space on /dev/%s..." msgstr "Formaterer swapplads på /dev/%s..." #: ../fstab.py:494 msgid "Error creating swap on device " msgstr "Kunne ikke oprette swap på enhed " #: ../fstab.py:595 #, c-format msgid "Error unmounting %s: %s" msgstr "Kunne ikke afmontere %s: %s" #: ../fstab.py:641 ../todo.py:583 msgid "Creating" msgstr "Opretter" #: ../fstab.py:641 msgid "Creating RAID devices..." msgstr "Opretter RAID-enheder..." #: ../fstab.py:682 msgid "Loopback" msgstr "Loopback" #: ../fstab.py:683 #, c-format msgid "Creating loopback filesystem on device /dev/%s..." msgstr "Opretter loopback-filsystem på enhed /dev/%s..." #: ../fstab.py:748 ../fstab.py:1172 #, c-format msgid "Formatting %s filesystem..." msgstr "Formaterer %s filsystem..." #: ../fstab.py:799 #, c-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "This most likely means this partition has not been formatted.\n" "\n" "Press OK to reboot your system." msgstr "" #: ../gui.py:170 msgid "" "An exceptional condition has occured. This is most likely a bug. Please " "copy the full text of this exception and file a bug report at " "http://bugzilla.redhat.com/bugzilla" msgstr "" "En usædvanlig hændelse er sket. Dette er sandsynligvis en fejl. Venligst " "kopiér den fulde tekst fra denne hændelse og udfyld en fejlrapport på " "http://bugzilla.redhat.com/bugzilla" #: ../gui.py:306 ../text.py:955 msgid "" "Please insert a floppy now. All contents of the disk will be erased, so " "please choose your diskette carefully." msgstr "" "Indsæt venligt en diskette. Alt indhold på disketten vil blive slettet, så " "vælg venligst disketten med omhu." #: ../gui.py:405 ../gui.py:837 msgid "Next" msgstr "Næste" #: ../gui.py:406 ../gui.py:836 ../libfdisk/newtfsedit.c:1463 #: ../libfdisk/newtfsedit.c:1471 ../loader/cdrom.c:34 ../loader/devices.c:93 #: ../loader/devices.c:215 ../loader/devices.c:312 ../loader/lang.c:577 #: ../loader/loader.c:283 ../loader/loader.c:797 ../loader/loader.c:834 #: ../loader/loader.c:948 ../loader/loader.c:1040 ../loader/loader.c:1492 #: ../loader/net.c:164 ../loader/net.c:251 ../loader/net.c:336 #: ../loader/urls.c:155 ../loader/urls.c:375 ../rescue.py:76 ../text.py:64 #: ../text.py:75 ../text.py:146 ../text.py:191 ../text.py:238 ../text.py:241 #: ../text.py:316 ../text.py:371 ../text.py:389 ../text.py:392 ../text.py:411 #: ../text.py:414 ../text.py:436 ../text.py:439 ../text.py:496 ../text.py:499 #: ../text.py:525 ../text.py:529 ../text.py:538 ../text.py:607 ../text.py:609 #: ../text.py:619 ../text.py:621 ../textw/bootdisk_text.py:30 #: ../textw/firewall_text.py:9 ../textw/lilo_text.py:34 #: ../textw/lilo_text.py:93 ../textw/lilo_text.py:101 #: ../textw/lilo_text.py:209 ../textw/mouse_text.py:27 #: ../textw/mouse_text.py:28 ../textw/mouse_text.py:55 #: ../textw/mouse_text.py:81 ../textw/network_text.py:102 #: ../textw/network_text.py:161 ../textw/network_text.py:164 #: ../textw/packages_text.py:55 ../textw/packages_text.py:236 #: ../textw/packages_text.py:347 ../textw/packages_text.py:353 #: ../textw/partitioning_text.py:23 ../textw/partitioning_text.py:64 #: ../textw/partitioning_text.py:154 ../textw/partitioning_text.py:218 #: ../textw/partitioning_text.py:257 ../textw/partitioning_text.py:318 #: ../textw/silo_text.py:26 ../textw/silo_text.py:99 ../textw/silo_text.py:206 #: ../textw/timezone_text.py:69 ../textw/userauth_text.py:30 #: ../textw/userauth_text.py:165 ../textw/userauth_text.py:199 #: ../textw/userauth_text.py:297 msgid "Back" msgstr "Tilbage" #: ../gui.py:407 ../gui.py:842 msgid "Show Help" msgstr "Vis hjælp" #: ../gui.py:408 ../gui.py:841 msgid "Hide Help" msgstr "Skjul hjælp" #: ../gui.py:409 ../gui.py:840 msgid "Finish" msgstr "Færdig" #: ../gui.py:412 ../gui.py:872 msgid "Online Help" msgstr "Ved hånden-hjælp" #: ../gui.py:413 ../iw/language_gui.py:10 ../iw/language_support_gui.py:25 #: ../text.py:69 ../text.py:1027 ../text.py:1059 msgid "Language Selection" msgstr "Sprogvalg" #: ../gui.py:567 ../gui.py:839 msgid "Release Notes" msgstr "" #: ../gui.py:744 msgid "Red Hat Linux Installer" msgstr "Red Hat Linux installation" #: ../gui.py:748 msgid "Red Hat Linux Install Shell" msgstr "Red Hat Linux installationsskal" #: ../gui.py:759 #, c-format msgid "Red Hat Linux Installer on %s" msgstr "Red Hat Linux installerer på %s" #: ../gui.py:760 #, c-format msgid "Red Hat Linux Install Shell on %s" msgstr "Red Hat Linux installationsskal på %s" #: ../gui.py:921 msgid "Install Window" msgstr "Installeringsvindue" #: ../harddrive.py:169 #, c-format msgid "Missing CD #%d, which is required for the install." msgstr "" #: ../image.py:58 msgid "Copying File" msgstr "Kopierer fil" #: ../image.py:59 msgid "Transferring install image to hard drive..." msgstr "Overfører installationsbillede til harddisken..." #: ../image.py:62 msgid "" "An error occured transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" "En fejl opstod ved overførsel af installationsbilledet til din harddisk. Du " "er nok løbet tør for diskplads." #: ../image.py:115 msgid "Change CDROM" msgstr "Ændr cdrom" #: ../image.py:116 #, c-format msgid "Please insert disc %d to continue." msgstr "Indsæt cd %d for at fortsætte." #: ../image.py:133 msgid "Wrong CDROM" msgstr "Forkert cdrom" #: ../image.py:134 msgid "That's not the correct Red Hat CDROM." msgstr "Dette er ikke den korrekte Red Hat-cdrom" #: ../image.py:139 msgid "The CDROM could not be mounted." msgstr "Cdrom'en kunne ikke monteres." #: ../rescue.py:43 #, fuzzy msgid "System to Rescue" msgstr "System som skal opgraderes" #: ../rescue.py:44 ../text.py:387 msgid "What partition holds the root partition of your installation?" msgstr "Hvilken partition indeholder din installations rodpartition?" #: ../loader/cdrom.c:34 ../loader/devices.c:92 ../loader/devices.c:214 #: ../loader/devices.c:236 ../loader/devices.c:243 ../loader/devices.c:312 #: ../loader/devices.c:410 ../loader/devices.c:455 ../loader/devices.c:475 #: ../loader/devices.c:507 ../loader/kickstart.c:58 ../loader/kickstart.c:68 #: ../loader/kickstart.c:107 ../loader/lang.c:97 ../loader/lang.c:289 #: ../loader/lang.c:577 ../loader/loader.c:283 ../loader/loader.c:510 #: ../loader/loader.c:520 ../loader/loader.c:574 ../loader/loader.c:834 #: ../loader/loader.c:893 ../loader/loader.c:948 ../loader/loader.c:1040 #: ../loader/loader.c:1118 ../loader/loader.c:1123 ../loader/loader.c:1220 #: ../loader/loader.c:1229 ../loader/loader.c:1260 ../loader/loader.c:1492 #: ../loader/loader.c:2127 ../loader/loader.c:2173 ../loader/loader.c:2236 #: ../loader/loader.c:2249 ../loader/net.c:164 ../loader/net.c:251 #: ../loader/net.c:336 ../loader/net.c:645 ../loader/net.c:678 #: ../loader/pcmcia.c:104 ../loader/pcmcia.c:114 ../loader/pcmcia.c:131 #: ../loader/urls.c:155 ../loader/urls.c:233 ../loader/urls.c:238 #: ../loader/urls.c:375 ../rescue.py:46 ../rescue.py:63 ../rescue.py:70 #: ../text.py:146 ../text.py:191 ../text.py:238 ../text.py:316 ../text.py:389 #: ../text.py:436 ../text.py:454 ../text.py:496 ../text.py:525 ../text.py:607 #: ../text.py:619 ../text.py:648 ../text.py:669 ../text.py:839 ../text.py:897 #: ../text.py:923 ../text.py:949 ../text.py:957 ../text.py:972 ../text.py:1205 #: ../textw/bootdisk_text.py:52 ../textw/bootdisk_text.py:54 #: ../textw/firewall_text.py:9 ../textw/firewall_text.py:122 #: ../textw/firewall_text.py:124 ../textw/lilo_text.py:33 #: ../textw/lilo_text.py:93 ../textw/lilo_text.py:152 #: ../textw/lilo_text.py:158 ../textw/mouse_text.py:55 #: ../textw/network_text.py:102 ../textw/network_text.py:123 #: ../textw/network_text.py:161 ../textw/packages_text.py:55 #: ../textw/packages_text.py:89 ../textw/packages_text.py:236 #: ../textw/packages_text.py:347 ../textw/partitioning_text.py:257 #: ../textw/partitioning_text.py:318 ../textw/partitioning_text.py:329 #: ../textw/partitioning_text.py:337 ../textw/partitioning_text.py:344 #: ../textw/silo_text.py:25 ../textw/silo_text.py:99 #: ../textw/timezone_text.py:69 ../textw/userauth_text.py:30 #: ../textw/userauth_text.py:44 ../textw/userauth_text.py:49 #: ../textw/userauth_text.py:84 ../textw/userauth_text.py:99 #: ../textw/userauth_text.py:105 ../textw/userauth_text.py:111 #: ../textw/userauth_text.py:119 ../textw/userauth_text.py:128 #: ../textw/userauth_text.py:135 ../textw/userauth_text.py:199 #: ../textw/userauth_text.py:297 ../xserver.py:33 msgid "OK" msgstr "Ok" #: ../iw/congrats_gui.py:13 ../iw/congrats_gui.py:62 ../rescue.py:46 #: ../rescue.py:50 msgid "Exit" msgstr "Afslut" #: ../rescue.py:59 ../rescue.py:65 #, fuzzy msgid "Rescue" msgstr "_Nulstil" #: ../rescue.py:60 msgid "" "Your system has been mounted under /mnt/sysimage.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" #: ../rescue.py:66 msgid "" "An error occured trying to mount some or all of your system. Some of it may " "be mounted under /mnt/sysimage.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" #: ../rescue.py:72 #, fuzzy msgid "Rescue Mode" msgstr "Redningsmetode" #: ../rescue.py:73 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" #: ../rescue.py:84 msgid "Your system is mounted under the /mnt/sysimage directory." msgstr "" #. code to create dialog in gtk+ #: ../iw/package_gui.py:470 ../libfdisk/fsedit.c:917 ../libfdisk/fsedit.c:924 #: ../libfdisk/fsedit.c:931 ../libfdisk/fsedit.c:940 ../libfdisk/fsedit.c:967 #: ../libfdisk/fsedit.c:980 ../libfdisk/fsedit.c:990 ../libfdisk/fsedit.c:1019 #: ../libfdisk/fsedit.c:1029 ../libfdisk/fsedit.c:1046 #: ../libfdisk/fsedit.c:1454 ../libfdisk/gnomefsedit.c:783 #: ../libfdisk/gnomefsedit.c:818 ../libfdisk/gnomefsedit.c:1166 #: ../libfdisk/gnomefsedit.c:1203 ../libfdisk/gnomefsedit.c:1237 #: ../libfdisk/gnomefsedit.c:1256 ../libfdisk/gnomefsedit.c:1430 #: ../libfdisk/gnomefsedit.c:1505 ../libfdisk/gnomefsedit.c:1555 #: ../libfdisk/gnomefsedit.c:1620 ../libfdisk/gnomefsedit.c:1638 #: ../libfdisk/gnomefsedit.c:1916 ../libfdisk/gnomefsedit.c:1925 #: ../libfdisk/gnomefsedit.c:2171 ../libfdisk/gnomefsedit.c:2179 #: ../libfdisk/gnomefsedit.c:2223 ../libfdisk/gnomefsedit.c:2233 #: ../libfdisk/gnomefsedit.c:2240 ../libfdisk/gnomefsedit.c:2255 #: ../libfdisk/gnomefsedit.c:2265 ../libfdisk/gnomefsedit.c:2275 #: ../libfdisk/gnomefsedit.c:2314 ../libfdisk/gnomefsedit.c:2445 #: ../libfdisk/gnomefsedit.c:2487 ../libfdisk/newtfsedit.c:170 #: ../libfdisk/newtfsedit.c:346 ../libfdisk/newtfsedit.c:574 #: ../libfdisk/newtfsedit.c:636 ../libfdisk/newtfsedit.c:669 #: ../libfdisk/newtfsedit.c:695 ../libfdisk/newtfsedit.c:714 #: ../libfdisk/newtfsedit.c:834 ../libfdisk/newtfsedit.c:1463 #: ../libfdisk/newtfsedit.c:1471 ../libfdisk/newtfsedit.c:1596 #: ../libfdisk/newtfsedit.c:1617 ../libfdisk/newtfsedit.c:1645 #: ../libfdisk/newtfsedit.c:1729 ../loader/urls.c:78 ../loader/urls.c:87 #: ../loader/urls.c:94 ../loader/urls.c:244 ../text.py:64 ../text.py:66 #: ../text.py:538 ../textw/lilo_text.py:123 ../textw/lilo_text.py:208 #: ../textw/mouse_text.py:27 ../textw/partitioning_text.py:154 #: ../textw/partitioning_text.py:395 ../textw/silo_text.py:136 #: ../textw/silo_text.py:149 ../textw/silo_text.py:205 msgid "Ok" msgstr "Ok" #: ../text.py:70 msgid "What language would you like to use during the installation process?" msgstr "Hvilket sprog ønsker du at benytte under installationsprocessen?" #: ../text.py:149 #, fuzzy msgid "Choose the languages to be installed:" msgstr "Hvilken type medium befinder pakkerne, som skal installeres, sig på?" #: ../text.py:155 ../text.py:1061 #, fuzzy msgid "Language Support" msgstr "Understøttelse for bærbare" #: ../text.py:194 #, fuzzy msgid "Choose the default language:" msgstr "Vælg et sprog" #: ../text.py:200 #, fuzzy msgid "Default Language" msgstr "Vælg et sprog" #: ../text.py:236 ../text.py:1029 ../text.py:1065 msgid "Keyboard Selection" msgstr "Tastaturvalg" #: ../text.py:237 msgid "Which model keyboard is attached to this computer?" msgstr "Hvilken tastaturtype er forbundet til denne maskine?" #: ../text.py:292 msgid "Upgrade Existing Installation" msgstr "Opgradér eksisterende installation" #: ../text.py:314 ../text.py:1068 msgid "Installation Type" msgstr "Installationstype" #: ../text.py:315 msgid "What type of system would you like to install?" msgstr "Hvilken type system ønsker du at installere?" #: ../text.py:369 msgid "You don't have any Linux partitions. You can't upgrade this system!" msgstr "Du har ingen Linux-partitioner. Du kan ikke opgradere dette system!" #: ../text.py:386 msgid "System to Upgrade" msgstr "System som skal opgraderes" #: ../text.py:403 msgid "Customize Packages to Upgrade" msgstr "Vælg selv pakker som skal opgraderes" #: ../text.py:404 msgid "" "The packages you have installed, and any other packages which are needed to " "satisfy their dependencies, have been selected for installation. Would you " "like to customize the set of packages that will be upgraded?" msgstr "" "Pakkerne du har installeret, og de andre pakker som er nødvendige for at " "opfylde deres afhængigheder, er blevet valgt til installering. Ønsker du at " "ændre i sammensætningen af pakker som vil blive opgraderet?" #: ../iw/rootpartition_gui.py:430 ../iw/welcome_gui.py:90 #: ../libfdisk/fsedit.c:948 ../libfdisk/gnomefsedit.c:733 #: ../libfdisk/gnomefsedit.c:1141 ../libfdisk/gnomefsedit.c:1280 #: ../libfdisk/gnomefsedit.c:1302 ../libfdisk/gnomefsedit.c:2368 #: ../libfdisk/gnomefsedit.c:2655 ../libfdisk/gnomefsedit.c:2710 #: ../libfdisk/newtfsedit.c:612 ../libfdisk/newtfsedit.c:739 #: ../libfdisk/newtfsedit.c:860 ../libfdisk/newtfsedit.c:1666 #: ../libfdisk/newtfsedit.c:1684 ../libfdisk/newtfsedit.c:1771 #: ../loader/devices.c:207 ../loader/loader.c:797 ../loader/net.c:812 #: ../text.py:411 ../textw/bootdisk_text.py:12 ../textw/bootdisk_text.py:30 #: ../textw/bootdisk_text.py:38 ../textw/partitioning_text.py:218 #: ../textw/partitioning_text.py:377 msgid "Yes" msgstr "Ja" #: ../iw/rootpartition_gui.py:432 ../iw/welcome_gui.py:93 #: ../libfdisk/fsedit.c:948 ../libfdisk/gnomefsedit.c:733 #: ../libfdisk/gnomefsedit.c:1141 ../libfdisk/gnomefsedit.c:1280 #: ../libfdisk/gnomefsedit.c:1302 ../libfdisk/gnomefsedit.c:2368 #: ../libfdisk/gnomefsedit.c:2655 ../libfdisk/gnomefsedit.c:2710 #: ../libfdisk/newtfsedit.c:612 ../libfdisk/newtfsedit.c:739 #: ../libfdisk/newtfsedit.c:860 ../libfdisk/newtfsedit.c:1666 #: ../libfdisk/newtfsedit.c:1684 ../libfdisk/newtfsedit.c:1771 #: ../loader/devices.c:208 ../loader/net.c:812 ../text.py:411 ../text.py:417 #: ../textw/bootdisk_text.py:12 ../textw/bootdisk_text.py:30 #: ../textw/bootdisk_text.py:41 ../textw/partitioning_text.py:377 msgid "No" msgstr "Nej" #: ../text.py:427 ../text.py:446 msgid "Red Hat Linux" msgstr "Red Hat Linux" #: ../text.py:428 msgid "" "Welcome to Red Hat Linux!\n" "\n" "This installation process is outlined in detail in the Official Red Hat " "Linux Installation Guide available from Red Hat Software. If you have access " "to this manual, you should read the installation section before continuing.\n" "\n" "If you have purchased Official Red Hat Linux, be sure to register your " "purchase through our web site, http://www.redhat.com/." msgstr "" "Velkommen til Red Hat Linux!\n" "\n" "Denne installationsproces er beskrevet i detaljer i den officielle Red Hat " "Linux installationsguide som kan fås fra Red Hat Software. Hvis du har " "adgang til denne manual, bør du læse afsnittet om installation før du " "fortsætter.\n" "\n" "Har du købt den officielle Red Hat Linux, husk da at registrere dit køb " "gennem vores webside, http://www.redhat.com/." #: ../text.py:447 msgid "" "Welcome to the Red Hat Linux!\n" "\n" "You have entered reconfiguration mode, which will allow you to configure " "site-specific options of your computer.\n" "\n" "To exit without changing your setup select the Cancel button below." msgstr "" "Velkommen til Red Hat Linux!\n" "\n" "Du er i en omkonfigurationstilstand som giver dig mulighed for at " "konfigurere din maskines lokalt-specifikke indstillinger.\n" "\n" "Tryk på Annullér knappen for afslutte uden at ændre din opsætning." #: ../libfdisk/gnomefsedit.c:818 ../libfdisk/gnomefsedit.c:1925 #: ../libfdisk/gnomefsedit.c:2487 ../libfdisk/newtfsedit.c:575 #: ../libfdisk/newtfsedit.c:1684 ../loader/devices.c:215 #: ../loader/devices.c:507 ../loader/loader.c:2236 ../loader/pcmcia.c:104 #: ../text.py:454 ../text.py:457 ../text.py:839 ../text.py:840 ../text.py:957 #: ../text.py:959 ../textw/lilo_text.py:124 ../textw/silo_text.py:136 #: ../textw/silo_text.py:154 ../textw/userauth_text.py:63 msgid "Cancel" msgstr "Annullér" #: ../text.py:494 msgid "X probe results" msgstr "Resultat af X-test" #: ../text.py:514 ../text.py:534 msgid "Unlisted Card" msgstr "Ulistet kort" #: ../text.py:522 msgid "Video Card Selection" msgstr "Valg af grafikkort" #: ../text.py:523 msgid "Which video card do you have?" msgstr "Hvilket grafikkort har du?" #: ../text.py:536 msgid "X Server Selection" msgstr "Valg af X-tjener" #: ../text.py:536 msgid "Choose a server" msgstr "Vælg en tjener" #: ../text.py:603 msgid "Installation to begin" msgstr "Installation begynder" #: ../iw/confirm_gui.py:45 ../text.py:604 msgid "" "A complete log of your installation will be in /tmp/install.log after " "rebooting your system. You may want to keep this file for later reference." msgstr "" "En komplet log af din installation vil befinde sig i /tmp/install.log efter " "du har genstartet dit system. Du kan beholde denne fil for senere reference." #: ../text.py:615 msgid "Upgrade to begin" msgstr "Opgradér system" #: ../iw/confirm_gui.py:41 ../text.py:616 msgid "" "A complete log of your upgrade will be in /tmp/upgrade.log after rebooting " "your system. You may want to keep this file for later reference." msgstr "" "En komplet log af din installation vil befinde sig i /tmp/install.log efter " "du har genstartet dit system. Du kan beholde denne fil til senere reference." #: ../text.py:635 msgid "" " to reboot " " " msgstr "" #: ../text.py:637 ../text.py:660 msgid "Complete" msgstr "Færdig" #: ../iw/congrats_gui.py:34 ../text.py:638 #, fuzzy msgid "" "Congratulations, installation is complete.\n" "\n" "Press return to reboot, and be sure to remove your boot medium after the " "system reboots, or your system will rerun the install. For information on " "fixes which are available for this release of Red Hat Linux, consult the " "Errata available from http://www.redhat.com/errata.\n" "\n" "Information on configuring and using your Red Hat Linux system is contained " "in the Red Hat Linux manuals." msgstr "" "Tillykke, installationen er færdig.\n" "\n" "Tryk venligst på retur/enter for at genstarte, og husk at fjerne " "opstartsmediet først, ellers kommer du til at køre hele installationen én " "gang til. For oplysninger om hvilke fejlretninger der findes for denne " "udgave af Red Hat Linux, læs erratadata som findes på " "http://www.redhat.com/errata\n" "\n" "Information om konfiguration og brug af dit Redhat Linux system finder du i " "Red Hat Linux manualerne." #: ../text.py:656 msgid "" " to exit " " " msgstr "" #: ../text.py:661 #, fuzzy msgid "" "Congratulations, configuration is complete.\n" "\n" " For information on fixes which are available for this release of Red Hat " "Linux, consult the Errata available from http://www.redhat.com.\n" "\n" "Information on further configuring your system is available at " "http://www.redhat.com/support/manuals/" msgstr "" "Tillykke, installationen er færdig.\n" "\n" "For oplysninger om hvilke fejlretninger der findes for denne udgave af Red " "Hat Linux, læs erratadata som du finder på http://www.redhat.com.\n" "\n" "Information om yderligere konfiguration af dit system kan du finde i den " "officielle Red Hat brugerguide i kapitlet om efterinstallation." #: ../text.py:728 msgid "Package Installation" msgstr "Pakkeinstallation" #: ../text.py:730 msgid "Name : " msgstr "Navn : " #: ../text.py:731 msgid "Size : " msgstr "Størrelse: " #: ../text.py:732 msgid "Summary: " msgstr "Resumé : " #: ../text.py:758 msgid " Packages" msgstr " Pakker" #: ../text.py:759 msgid " Bytes" msgstr " Byte" #: ../text.py:760 msgid " Time" msgstr " Tid" #: ../text.py:762 msgid "Total :" msgstr "Total :" #: ../text.py:769 msgid "Completed: " msgstr "Færdig : " #: ../text.py:779 msgid "Remaining: " msgstr "Tilbage : " #: ../text.py:895 msgid "Help not available" msgstr "Ingen hjælp tilgængelig" #: ../text.py:896 msgid "No help is available for this install." msgstr "Intet hjælp er tilgængelig for denne installation." #: ../text.py:954 msgid "Save Crash Dump" msgstr "Gem krash-information" #: ../text.py:965 msgid "" "An internal error occurred in the installation program. Please report this " "error to Red Hat (through the bugzilla.redhat.com web site) as soon as " "possible. The information on this failure may be saved to a floppy disk, and " "will help Red Hat in fixing the problem.\n" "\n" msgstr "" "En intern fejl hændte i installationsprogrammet. Rapportér venligst denne " "fejl til Red Hat så hurtigt som muligt (gennem bugzilla.redhat.com websiden) " "Information om fejlen kan gemmen på diskette, og vil være en stor hjælp når " "Red Hat skal rette fejlen.\n" "\n" #: ../text.py:972 ../text.py:975 msgid "Save" msgstr "Gem" #: ../text.py:972 ../text.py:973 msgid "Debug" msgstr "Fejlfind" #: ../text.py:983 msgid " " msgstr "" #: ../text.py:987 msgid "Red Hat Linux (C) 2001 Red Hat, Inc." msgstr "Red Hat Linux (C) 2001 Red Hat, Inc." #: ../text.py:990 msgid "" " for help | between elements | selects | next screen" msgstr "" " for hjælp | imellem punkter | vælg | næste side" #: ../text.py:992 msgid "" " / between elements | selects | next " "screen" msgstr "" " / imellem punkter | vælger | næste side" #: ../iw/welcome_gui.py:11 ../iw/welcome_gui.py:39 ../text.py:1025 #: ../text.py:1067 msgid "Welcome" msgstr "Velkommen" #: ../text.py:1031 ../text.py:1113 msgid "Hostname Setup" msgstr "Værtsnavnsopsætning" #: ../text.py:1033 ../text.py:1110 msgid "Network Setup" msgstr "Netværksopsætning" #: ../iw/firewall_gui.py:12 ../text.py:1035 ../text.py:1115 #: ../textw/firewall_text.py:11 #, fuzzy msgid "Firewall Configuration" msgstr "Lilo-konfiguration" #: ../text.py:1042 ../text.py:1121 msgid "Time Zone Setup" msgstr "Tidszoneopsætning" #: ../text.py:1044 ../text.py:1123 ../textw/userauth_text.py:9 msgid "Root Password" msgstr "'Root'-adgangskode" #: ../text.py:1046 ../text.py:1125 ../textw/userauth_text.py:172 msgid "User Account Setup" msgstr "Brugerkontiopsætning" #: ../text.py:1048 ../text.py:1127 msgid "Authentication" msgstr "Godkendelse" #: ../text.py:1054 msgid "Configuration Complete" msgstr "Konfiguration er komplet" #: ../text.py:1063 #, fuzzy msgid "Language Default" msgstr "Sprogvalg" #: ../text.py:1076 ../textw/silo_text.py:28 ../textw/silo_text.py:101 #: ../textw/silo_text.py:213 msgid "SILO Configuration" msgstr "SILO-konfiguration" #: ../text.py:1082 ../textw/lilo_text.py:36 ../textw/lilo_text.py:90 #: ../textw/lilo_text.py:217 msgid "LILO Configuration" msgstr "LILO-konfiguration" #: ../text.py:1086 msgid "Automatic Partition" msgstr "Automatisk partitionering" #: ../iw/lilo_gui.py:205 ../iw/lilo_gui.py:364 ../iw/silo_gui.py:127 #: ../iw/silo_gui.py:280 ../text.py:1088 ../text.py:1092 msgid "Partition" msgstr "Partition" #: ../text.py:1090 msgid "Manually Partition" msgstr "Manuel partitionering" #: ../text.py:1094 ../textw/partitioning_text.py:310 msgid "Root Filesystem Size" msgstr "Rodfilsystemstørrelse" #: ../text.py:1096 msgid "Swap" msgstr "Swap" #: ../text.py:1098 ../textw/partitioning_text.py:365 #: ../textw/partitioning_text.py:385 #, fuzzy msgid "Boot Partition Warning" msgstr "Automatisk partitionering" #: ../text.py:1100 msgid "Filesystem Formatting" msgstr "Filsystemsformatering" #: ../iw/mouse_gui.py:56 ../text.py:1117 ../text.py:1119 msgid "Mouse Configuration" msgstr "Musekonfiguration" #: ../text.py:1129 msgid "Package Groups" msgstr "Pakkegrupper" #: ../text.py:1131 ../text.py:1159 msgid "Individual Packages" msgstr "Individuelle pakker" #: ../text.py:1133 ../textw/packages_text.py:304 msgid "Package Dependencies" msgstr "Pakkeafhængigheder" #: ../iw/xconfig_gui.py:1010 ../text.py:1135 ../text.py:1143 msgid "X Configuration" msgstr "X-konfiguration" #: ../text.py:1137 msgid "Installation Begins" msgstr "Installationen begynder" #: ../text.py:1139 msgid "Install System" msgstr "Installér system" #: ../text.py:1140 ../text.py:1142 ../text.py:1163 ../text.py:1165 msgid "Boot Disk" msgstr "Opstartsdiskette" #: ../text.py:1145 msgid "Installation Complete" msgstr "Installationen er færdig" #: ../text.py:1150 msgid "Examine System" msgstr "Undersøg system" #: ../text.py:1157 msgid "Customize Upgrade" msgstr "Manuel opgradering" #: ../text.py:1160 msgid "Upgrade Begins" msgstr "Opgraderingsundersøgelse" #: ../text.py:1162 msgid "Upgrade System" msgstr "Opgradér system" #: ../text.py:1166 msgid "Upgrade Complete" msgstr "Opgradering er færdig" #: ../text.py:1202 msgid "Cancelled" msgstr "Annulleret" #: ../text.py:1203 msgid "I can't go to the previous step from here. You will have to try again." msgstr "Jeg kan ikke gå til forrige trin herfra. Du må prøve igen." #: ../todo.py:583 msgid "Creating boot disk..." msgstr "Opretter opstartsdiskette..." #: ../todo.py:602 msgid "Reading" msgstr "Læser" #: ../todo.py:603 msgid "Reading package information..." msgstr "Læser pakkeinformation..." #: ../todo.py:852 msgid "Dependency Check" msgstr "Afhængighedstjek" #: ../todo.py:853 msgid "Checking dependencies in packages selected for installation..." msgstr "Tjekker afhængigheder i pakkerne som er valgt til installering..." #: ../todo.py:880 ../todo.py:922 ../todo.py:928 ../todo.py:945 ../todo.py:1070 msgid "no suggestion" msgstr "ingen forslag" #: ../todo.py:960 msgid "" "One or more of the filesystems listed in the /etc/fstab on your Linux system " "cannot be mounted. Please fix this problem and try to upgrade again." msgstr "" "Et eller flere filsystemer på dit system blev ikke afmonteret uden " "problemer. Genstart venligst din Linux-installation, lad filsystemerne blive " "tjekket og lukket ordentlig ned for at opgradere." #: ../todo.py:978 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" #: ../todo.py:992 msgid "Finding" msgstr "Finder" #: ../todo.py:993 msgid "Finding packages to upgrade..." msgstr "Finder pakker som skal opgraderes..." #: ../todo.py:1008 msgid "Rebuild of RPM database failed. You may be out of disk space?" msgstr "Genopbygning af RPM-database mislykkedes. Har du nok ledig diskplads?" #: ../todo.py:1021 msgid "An error occured when finding the packages to upgrade." msgstr "Der skete en fejl under søgning efter pakker som skal opgraderes." #: ../todo.py:1358 msgid "Processing" msgstr "Behandler" #: ../todo.py:1359 msgid "Preparing to install..." msgstr "Forbereder installation..." #: ../todo.py:1393 #, c-format msgid "" "The file %s cannot be opened. This is due to a missing file, a bad package, " "or bad media. Press to try again." msgstr "" #: ../todo.py:1623 #, c-format msgid "Upgrading %s.\n" msgstr "Opgraderer %s.\n" #: ../todo.py:1625 #, c-format msgid "Installing %s.\n" msgstr "Installerer %s.\n" #: ../todo.py:1670 msgid "" "You don't appear to have enough disk space to install the packages you've " "selected. You need more space on the following filesystems:\n" "\n" msgstr "" "Du ser ikke ud til at have nok diskplads til at installere de pakker du har " "valgt. Du har brug for mere plads på følgende filsystemer:\n" "\n" #: ../libfdisk/gnomefsedit.c:3033 ../todo.py:1673 ../todo.py:1689 msgid "Mount Point" msgstr "Monteringspunkt" #: ../todo.py:1673 msgid "Space Needed" msgstr "Nødvendig plads" #: ../todo.py:1686 #, fuzzy msgid "" "You don't appear to have enough file nodes to install the packages you've " "selected. You need more file nodes on the following filesystems:\n" "\n" msgstr "" "Du ser ikke ud til at have nok diskplads til at installere de pakker du har " "valgt. Du har brug for mere plads på følgende filsystemer:\n" "\n" #: ../todo.py:1689 #, fuzzy msgid "Nodes Needed" msgstr "Nødvendig plads" #: ../todo.py:1695 msgid "Disk Space" msgstr "Diskplads" #: ../todo.py:1730 msgid "Post Install" msgstr "Efterinstallation" #: ../todo.py:1731 msgid "Performing post install configuration..." msgstr "Konfigurerer systemet efter installation..." #: ../upgrade.py:10 msgid "Searching" msgstr "Søger" #: ../upgrade.py:11 msgid "Searching for Red Hat Linux installations..." msgstr "Søger efter Red Hat Linux-installationer..." #: ../upgrade.py:22 ../upgrade.py:50 #, c-format msgid "Error mounting ext2 filesystem on %s: %s" msgstr "Fejl under montering af ext2-filsystem på %s: %s" #: ../upgrade.py:94 msgid "" "One or more of the filesystems for your Linux system was not unmounted " "cleanly. Please boot your Linux installation, let the filesystems be " "checked, and shut down cleanly to upgrade." msgstr "" "Et eller flere filsystemer på dit system blev ikke afmonteret uden " "problemer. Genstart venligst din Linux-installation, lad filsystemerne blive " "tjekket og lukket ordentlig ned for at opgradere." #: ../iw/xconfig_gui.py:12 ../xf86config.py:929 msgid "Video Card" msgstr "Grafikkort" #: ../iw/xconfig_gui.py:14 ../xf86config.py:931 msgid "Video Ram" msgstr "Video-hukommelse" #: ../xf86config.py:934 msgid "X server" msgstr "X-tjener" #: ../xf86config.py:937 msgid "Unable to detect video card" msgstr "Kunne ikke identificere grafikkort" #: ../iw/xconfig_gui.py:13 ../xf86config.py:944 ../xf86config.py:946 msgid "Monitor" msgstr "Skærm" #: ../xf86config.py:946 msgid "Plug and Play Monitor" msgstr "'Plug and Play'-skærm" #: ../xf86config.py:948 msgid "Horizontal frequency range" msgstr "Vandret frekvensområde" #: ../xf86config.py:950 msgid "Vertical frequency range" msgstr "Lodret frekvensområde" #: ../xserver.py:26 msgid "Mouse Not Detected" msgstr "Mus ikke fundet" #: ../xserver.py:27 msgid "" "Your mouse was not automatically detected. To proceed in the graphical " "installation mode, please proceed to the next screen and provide your mouse " "information. You may also use text mode installation which does not require " "a mouse." msgstr "" "Din mus blev ikke automatisk fundet. For at fortsætte installationen i den " "grafiske tilstand, fortsæt da venligst til næste skærm og oplys gyldig " "information om din mus. Du kan også benytte den tekstbaserede installation " "som ikke kræver mus." #: ../xserver.py:33 ../xserver.py:34 msgid "Use text mode" msgstr "Benyt tekst-tilstand" #: ../iw/account_gui.py:15 msgid "Account Configuration" msgstr "Konti-konfiguration" #: ../iw/account_gui.py:36 msgid "Root password accepted." msgstr "'Root'-adgangskode accepteret." #: ../iw/account_gui.py:39 msgid "Please enter root password." msgstr "Indtast venligst adgangskode for 'root'." #: ../iw/account_gui.py:41 msgid "Root password is too short." msgstr "'Root'-adgangskoden er for kort." #: ../iw/account_gui.py:43 msgid "Root passwords do not match." msgstr "'Root'-adgangskoder stemmer ikke." #: ../iw/account_gui.py:56 msgid "User password accepted." msgstr "Brugeradgangskode accepteret." #: ../iw/account_gui.py:61 msgid "Root account can not be added here." msgstr "'Root'-konto kan ikke oprettes her." #: ../iw/account_gui.py:63 msgid "Please enter user password." msgstr "Indtast venligst adgangskode for bruger." #: ../iw/account_gui.py:65 msgid "User password is too short." msgstr "Bruger-adgangskoden er for kort." #: ../iw/account_gui.py:67 msgid "User passwords do not match." msgstr "Bruger-adgangskoden stemmer ikke." #: ../iw/account_gui.py:187 msgid "Root Password: " msgstr "Root-adgangskode: " #: ../iw/account_gui.py:190 msgid "Confirm: " msgstr "Bekræft: " #: ../iw/account_gui.py:251 ../iw/account_gui.py:300 msgid "Account Name" msgstr "Kontonavn" #: ../iw/account_gui.py:255 ../textw/userauth_text.py:81 msgid "Password" msgstr "Adgangskode" #: ../iw/account_gui.py:259 ../textw/userauth_text.py:82 msgid "Password (confirm)" msgstr "Adgangskode (bekræft)" #: ../iw/account_gui.py:270 ../iw/account_gui.py:300 #: ../textw/userauth_text.py:83 ../textw/userauth_text.py:184 msgid "Full Name" msgstr "Fulde navn" #: ../iw/account_gui.py:279 ../libfdisk/newtfsedit.c:1469 #: ../textw/userauth_text.py:198 msgid "Add" msgstr "Tilføj" #: ../iw/account_gui.py:281 ../libfdisk/newtfsedit.c:1462 #: ../libfdisk/newtfsedit.c:1470 ../textw/lilo_text.py:208 #: ../textw/lilo_text.py:231 ../textw/partitioning_text.py:63 #: ../textw/silo_text.py:205 ../textw/silo_text.py:227 #: ../textw/userauth_text.py:199 msgid "Edit" msgstr "Redigér" #: ../iw/account_gui.py:283 ../libfdisk/newtfsedit.c:1470 #: ../textw/userauth_text.py:198 msgid "Delete" msgstr "Slet" #: ../iw/account_gui.py:285 msgid "New" msgstr "Ny" #: ../iw/auth_gui.py:11 ../textw/userauth_text.py:299 msgid "Authentication Configuration" msgstr "Godkendelseskonfiguration" #: ../iw/auth_gui.py:78 msgid "Enable MD5 passwords" msgstr "Brug MD5-adgangskoder" #: ../iw/auth_gui.py:79 msgid "Enable shadow passwords" msgstr "Brug skygge-adgangskoder" #: ../iw/auth_gui.py:82 ../textw/userauth_text.py:308 msgid "Enable NIS" msgstr "Anvend NIS" #: ../iw/auth_gui.py:83 msgid "Use broadcast to find NIS server" msgstr "Benyt rundkastning til at finde NIS-tjener" #: ../iw/auth_gui.py:95 msgid "NIS Domain: " msgstr "NIS-domæne: " #: ../iw/auth_gui.py:97 msgid "NIS Server: " msgstr "NIS-tjener: " #: ../iw/auth_gui.py:136 ../textw/userauth_text.py:342 msgid "Enable LDAP" msgstr "Anvend LDAP" #: ../iw/auth_gui.py:139 msgid "Use TLS lookups" msgstr "" #: ../iw/auth_gui.py:140 ../textw/userauth_text.py:348 msgid "LDAP Server:" msgstr "LDAP-tjener:" #: ../iw/auth_gui.py:142 ../textw/userauth_text.py:350 msgid "LDAP Base DN:" msgstr "LDAP basal DN:" #: ../iw/auth_gui.py:173 ../textw/userauth_text.py:371 msgid "Enable Kerberos" msgstr "Aktivér Kerberos" #: ../iw/auth_gui.py:177 ../textw/userauth_text.py:378 msgid "Realm:" msgstr "'Realm':" #: ../iw/auth_gui.py:179 ../textw/userauth_text.py:380 msgid "KDC:" msgstr "KDC:" #: ../iw/auth_gui.py:181 ../textw/userauth_text.py:382 msgid "Admin Server:" msgstr "Admin-tjener:" #: ../iw/bootdisk_gui.py:11 msgid "Bootdisk Creation" msgstr "Fremstil opstartsdiskette" #: ../iw/bootdisk_gui.py:58 msgid "" "Please remove the install floppy (if used) and insert a blank floppy in the " "first floppy drive. All data on this disk will be erased during creation of " "the boot disk." msgstr "" "Indsæt en tom diskette i diskettedrevet. Alle data på denne diskette vil " "blive slettet under fremstillingen af opstartsdisketten." #: ../iw/bootdisk_gui.py:62 ../textw/bootdisk_text.py:70 msgid "" "An error occured while making the boot disk. Please make sure that there is " "a formatted floppy in the first floppy drive." msgstr "" "En fejl opstod under fremstillingen af opstartsdisketten. Se efter om der er " "en formateret diskette i det første diskettedrev." #: ../iw/bootdisk_gui.py:69 msgid "Skip boot disk creation" msgstr "Undlad fremstilling af opstartsdiskette" #: ../iw/confirm_gui.py:13 msgid "About to Upgrade" msgstr "System som skal opgraderes" #: ../iw/confirm_gui.py:16 msgid "About to Install" msgstr "Klar til at installere" #: ../iw/confirm_gui.py:34 msgid "Click next to begin upgrade of Red Hat Linux." msgstr "Klik på næste for at begynde opgradering af Red Hat Linux" #: ../iw/confirm_gui.py:36 msgid "Click next to begin installation of Red Hat Linux." msgstr "Klik på næste for at begynde installation af Red Hat Linux" #: ../iw/congrats_gui.py:11 ../iw/congrats_gui.py:60 msgid "Congratulations" msgstr "Tillykke" #: ../iw/congrats_gui.py:83 #, fuzzy msgid "" "Congratulations, configuration is complete.\n" "\n" "For information on fixes which are available for this release of Red Hat " "Linux, consult the Errata available from http://www.redhat.com.\n" "\n" "Information on further configuring your system is available in the Official " "Red Hat Linux Manuals available at http://www.redhat.com/support/manuals/." msgstr "" "Tillykke, installationen er færdig.\n" "\n" "For oplysninger om hvilke fejlretninger der findes for denne udgave af Red " "Hat Linux, læs erratadata på http://www.redhat.com.\n" "\n" "Information om yderligere konfiguration af dit system finder du i den " "officielle Red Hat brugerguide i kapitlet efter installation." #: ../iw/dependencies_gui.py:9 msgid "Unresolved Dependencies" msgstr "Uløste afhængigheder" #: ../iw/dependencies_gui.py:31 ../iw/package_gui.py:524 #: ../textw/packages_text.py:12 ../textw/packages_text.py:275 #, c-format msgid "Total install size: %s" msgstr "Total størrelse: %s" #: ../iw/dependencies_gui.py:69 ../iw/package_gui.py:380 #: ../iw/progress_gui.py:191 ../textw/packages_text.py:312 msgid "Package" msgstr "Pakke" #: ../iw/dependencies_gui.py:69 ../textw/packages_text.py:312 msgid "Requirement" msgstr "Krav" #: ../iw/dependencies_gui.py:87 ../textw/packages_text.py:327 msgid "Install packages to satisfy dependencies" msgstr "Installér pakker for at opfylde afhængigheder" #: ../iw/dependencies_gui.py:90 ../textw/packages_text.py:328 msgid "Do not install packages that have dependencies" msgstr "Installér ikke pakker der har afhængigheder" #: ../iw/dependencies_gui.py:94 ../textw/packages_text.py:329 msgid "Ignore package dependencies" msgstr "Ignorér pakkeafhængigheder" #: ../iw/examine_gui.py:10 msgid "Upgrade Examine" msgstr "Opgraderingsundersøgelse" #: ../iw/examine_gui.py:36 msgid "" "You don't have any Linux partitions.\n" " You can't upgrade this sytem!" msgstr "" "Du har ingen Linux-partitioner.\n" " Du kan ikke opgradere dette system!" #: ../iw/examine_gui.py:45 msgid "Please select the device containing the root filesystem: " msgstr "Vælg venligst enheden som indeholder rodfilsystemet: " #: ../iw/examine_gui.py:73 msgid "Customize packages to be upgraded" msgstr "Vælg selv pakker som skal opgraderes" #: ../iw/fdisk_gui.py:12 ../textw/partitioning_text.py:22 msgid "fdisk" msgstr "'fdisk'" #: ../iw/fdisk_gui.py:106 msgid "Select drive to run fdisk on" msgstr "Vælg drev som 'fdisk' skal køres på" #: ../iw/firewall_gui.py:59 msgid "Please choose your security level: " msgstr "" #: ../iw/firewall_gui.py:68 ../textw/firewall_text.py:33 msgid "High" msgstr "" #: ../iw/firewall_gui.py:69 ../textw/firewall_text.py:36 msgid "Medium" msgstr "" #: ../iw/firewall_gui.py:70 ../textw/firewall_text.py:39 msgid "No firewall" msgstr "" #: ../iw/firewall_gui.py:87 msgid "Use default firewall rules" msgstr "" #: ../iw/firewall_gui.py:88 ../textw/firewall_text.py:9 #, fuzzy msgid "Customize" msgstr "Manuel opgradering" #: ../iw/firewall_gui.py:101 #, fuzzy msgid "Trusted devices:" msgstr "Anvendt RAID-enhed" #: ../iw/firewall_gui.py:111 ../textw/firewall_text.py:75 msgid "Allow incoming:" msgstr "" #: ../iw/firewall_gui.py:122 msgid "Other ports:" msgstr "" #: ../iw/format_gui.py:14 msgid "Choose partitions to Format" msgstr "Vælg partitioner som skal formateres" #: ../iw/format_gui.py:61 msgid "Check for bad blocks while formatting" msgstr "Se efter beskadigede blokke under formateringen" #: ../iw/installpath_gui.py:97 msgid "Install Type" msgstr "Installationstype" #: ../iw/installpath_gui.py:179 msgid "Install" msgstr "Installér" #: ../iw/installpath_gui.py:181 msgid "Upgrade" msgstr "Opgradér" #: ../iw/keyboard_gui.py:16 msgid "Keyboard Configuration" msgstr "Tastaturkonfiguration" #: ../iw/keyboard_gui.py:80 msgid "Model" msgstr "Model" #: ../iw/keyboard_gui.py:99 msgid "Layout" msgstr "Udseende" #: ../iw/keyboard_gui.py:118 msgid "Dead Keys" msgstr "Accenter" #: ../iw/keyboard_gui.py:127 msgid "Enable dead keys" msgstr "Benyt äccêntér" #: ../iw/keyboard_gui.py:128 msgid "Disable dead keys" msgstr "Benyt ikke accenter" #: ../iw/keyboard_gui.py:137 msgid "Test your selection here:" msgstr "Test dit valg her:" #: ../iw/language_gui.py:39 ../loader/lang.c:287 msgid "What language should be used during the installation process?" msgstr "Hvilket sprog skal benyttes under installationsprocessen?" #: ../iw/language_support_gui.py:140 #, fuzzy msgid "Choose the default language: " msgstr "Vælg et sprog" #: ../iw/language_support_gui.py:158 #, fuzzy msgid "Choose the languages to install:" msgstr "Vælg et sprog" #: ../iw/language_support_gui.py:197 #, fuzzy msgid "Select all" msgstr "Vælg partition" #: ../iw/language_support_gui.py:202 #, fuzzy msgid "Reset" msgstr "_Nulstil" #: ../iw/language_support_gui.py:224 msgid "Select as default" msgstr "" #: ../iw/lilo_gui.py:30 msgid "Lilo Configuration" msgstr "Lilo-konfiguration" #: ../iw/lilo_gui.py:208 ../iw/lilo_gui.py:365 ../iw/silo_gui.py:132 #: ../iw/silo_gui.py:281 ../libfdisk/gnomefsedit.c:3037 msgid "Type" msgstr "Type" #: ../iw/lilo_gui.py:253 msgid "Install LILO boot record on:" msgstr "Installér LILO-'boot record' på:" #: ../iw/lilo_gui.py:260 ../iw/silo_gui.py:173 ../textw/lilo_text.py:87 #: ../textw/silo_text.py:64 msgid "Master Boot Record (MBR)" msgstr "'Master Boot Record' (MBR)" #: ../iw/lilo_gui.py:264 ../iw/silo_gui.py:176 ../textw/lilo_text.py:88 #: ../textw/silo_text.py:65 msgid "First sector of boot partition" msgstr "Første sektor på opstartspartitionen" #: ../iw/lilo_gui.py:268 ../textw/lilo_text.py:27 msgid "Use linear mode (needed for some SCSI drives)" msgstr "Benyt lineær-tilstand (kræves for nogle SCSI-drev)" #: ../iw/lilo_gui.py:279 ../iw/silo_gui.py:208 msgid "Kernel parameters" msgstr "Kerneparametre" #: ../iw/lilo_gui.py:296 ../iw/silo_gui.py:226 msgid "Create boot disk" msgstr "Opret opstartsdiskette" #: ../iw/lilo_gui.py:310 #, fuzzy msgid "Install LILO" msgstr "Installér" #: ../iw/lilo_gui.py:337 ../iw/silo_gui.py:257 ../textw/lilo_text.py:199 #: ../textw/silo_text.py:196 msgid "Default" msgstr "Standard" #: ../iw/lilo_gui.py:337 ../iw/mouse_gui.py:145 ../iw/silo_gui.py:257 #: ../libfdisk/gnomefsedit.c:3034 ../textw/lilo_text.py:118 #: ../textw/lilo_text.py:199 ../textw/mouse_text.py:25 #: ../textw/silo_text.py:131 ../textw/silo_text.py:196 msgid "Device" msgstr "Enhed" #: ../iw/lilo_gui.py:337 ../iw/silo_gui.py:257 ../textw/lilo_text.py:199 #: ../textw/silo_text.py:196 msgid "Partition type" msgstr "Partitionstype" #: ../iw/lilo_gui.py:337 ../iw/lilo_gui.py:376 ../iw/silo_gui.py:257 #: ../iw/silo_gui.py:292 ../textw/lilo_text.py:119 ../textw/lilo_text.py:199 #: ../textw/silo_text.py:132 ../textw/silo_text.py:196 msgid "Boot label" msgstr "Opstartsnavn" #: ../iw/lilo_gui.py:372 ../iw/silo_gui.py:288 #, fuzzy msgid "Default boot image" msgstr "Angiv standard PROM-opstartsenhed" #: ../iw/mouse_gui.py:134 ../textw/mouse_text.py:7 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "/dev/ttyS0 (COM1 under DOS)" #: ../iw/mouse_gui.py:135 ../textw/mouse_text.py:8 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "/dev/ttyS1 (COM2 under DOS)" #: ../iw/mouse_gui.py:136 ../textw/mouse_text.py:9 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "/dev/ttyS2 (COM3 under DOS)" #: ../iw/mouse_gui.py:137 ../textw/mouse_text.py:10 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "/dev/ttyS3 (COM4 under DOS)" #: ../iw/mouse_gui.py:139 msgid "Emulate 3 Buttons" msgstr "Emulér 3 knapper" #: ../iw/mouse_gui.py:145 msgid "Port" msgstr "" #: ../iw/network_gui.py:11 ../textw/network_text.py:104 msgid "Network Configuration" msgstr "Netværkskonfiguration" #: ../iw/network_gui.py:170 msgid "Configure using DHCP" msgstr "Konfigurér ved brug af DHCP" #: ../iw/network_gui.py:176 msgid "Activate on boot" msgstr "Aktivér ved opstart" #: ../iw/network_gui.py:185 msgid "IP Address" msgstr "IP-adresse" #: ../iw/network_gui.py:186 ../loader/net.c:729 msgid "Netmask" msgstr "Netmaske" #: ../iw/network_gui.py:187 ../loader/loader.c:268 msgid "Network" msgstr "Netværk" #: ../iw/network_gui.py:188 msgid "Broadcast" msgstr "Rundkastning" #: ../iw/network_gui.py:232 ../loader/net.c:533 ../loader/net.c:731 #: ../textw/network_text.py:161 msgid "Hostname" msgstr "Værtsnavn" #: ../iw/network_gui.py:233 msgid "Gateway" msgstr "Gateway" #: ../iw/network_gui.py:233 msgid "Primary DNS" msgstr "Primær DNS" #: ../iw/network_gui.py:233 msgid "Secondary DNS" msgstr "Sekundær DNS" #: ../iw/network_gui.py:233 msgid "Ternary DNS" msgstr "Tertiær DNS" #: ../iw/package_gui.py:25 msgid "Individual Package Selection" msgstr "Individuelt pakkevalg" #: ../iw/package_gui.py:302 msgid "Total install size: " msgstr "Total størrelse for installation: " #: ../iw/package_gui.py:382 #, fuzzy msgid "Size (MB)" msgstr "Størrelse (Mb):" #: ../iw/package_gui.py:413 #, fuzzy msgid "Total size: " msgstr "Totalt" #: ../iw/package_gui.py:416 msgid "Select all in group" msgstr "" #: ../iw/package_gui.py:420 msgid "Unselect all in group" msgstr "" #: ../iw/package_gui.py:455 msgid "File not found" msgstr "" #: ../iw/package_gui.py:498 ../textw/packages_text.py:60 #: ../textw/packages_text.py:241 msgid "Package Group Selection" msgstr "Pakkegruppevalg" #: ../iw/package_gui.py:558 #, c-format msgid "" "The following error occurred while retreiving hdlist file:\n" "\n" "%s\n" "\n" "Installer will exit now." msgstr "" #: ../iw/package_gui.py:563 msgid "" "An error has occurred while retreiving the hdlist file. The installation " "media or image is probably corrupt. Installer will exit now." msgstr "" #: ../iw/package_gui.py:629 ../textw/packages_text.py:54 msgid "Select individual packages" msgstr "Vælg individuelle pakker" #: ../iw/progress_gui.py:51 msgid "Installing Packages" msgstr "Installerer pakker" #: ../iw/progress_gui.py:140 #, c-format msgid "%s KBytes" msgstr "" #: ../iw/progress_gui.py:192 ../iw/progress_gui.py:245 msgid "Size" msgstr "Størrelse" #: ../iw/progress_gui.py:193 msgid "Summary" msgstr "Resumé" #: ../iw/progress_gui.py:223 #, fuzzy msgid "Package Progress: " msgstr "Pakkegrupper" #: ../iw/progress_gui.py:228 #, fuzzy msgid "Total Progress: " msgstr "Total :" #: ../iw/progress_gui.py:245 msgid "Status" msgstr "Status" #: ../iw/progress_gui.py:245 msgid "Packages" msgstr "Pakker" #: ../iw/progress_gui.py:245 msgid "Time" msgstr "Tid" #: ../iw/progress_gui.py:255 msgid "Total" msgstr "Total" #: ../iw/progress_gui.py:256 msgid "Completed" msgstr "Færdig" #: ../iw/progress_gui.py:257 msgid "Remaining" msgstr "Tilbage" #: ../iw/rootpartition_gui.py:38 ../textw/partitioning_text.py:22 msgid "Disk Druid" msgstr "Diskdruide" #: ../iw/rootpartition_gui.py:50 ../textw/partitioning_text.py:213 msgid "Low Memory" msgstr "Lav hukommelse" #: ../iw/rootpartition_gui.py:51 ../textw/partitioning_text.py:214 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that okay?" msgstr "" "Da du ikke har ret megen hukommelse på denne maskine, bliver vi nødt til slå " "swap til med det samme. For at gøre det er vi nødt at skrive den nye " "partitionstabel på disken. Er det ok?" #: ../iw/rootpartition_gui.py:149 ../textw/partitioning_text.py:311 #, c-format msgid "" "You've chosen to put your root filesystem in a file on an already-existing " "DOS or Windows filesystem. How large, in megabytes, should would you like " "the root filesystem to be, and how much swap space would you like? They must " "total less then %d megabytes in size." msgstr "" "Du har valgt at placere dit rodfilsystem i en fil på et allerede " "eksisterende DOS eller Windows-filsystem. Hvor stort, i megabyte, vil du " "have at rodfilsystemet skal være og hvor megen swapplads vil du have? " "Totalt skal de være mindre end %d megabyte i størrelse." #: ../iw/rootpartition_gui.py:178 msgid "Root filesystem size:" msgstr "Rodfilsystemstørrelse:" #: ../iw/rootpartition_gui.py:183 msgid "Swap space size:" msgstr "Swappladsstørrelse:" #: ../iw/rootpartition_gui.py:254 ../iw/rootpartition_gui.py:305 #: ../textw/partitioning_text.py:148 msgid "Automatic Partitioning" msgstr "Automatisk partitionering" #: ../iw/rootpartition_gui.py:307 ../textw/partitioning_text.py:149 #, c-format msgid "" "%s\n" "\n" "If you don't want to do this, you can continue with this install by " "partitioning manually, or you can go back and perform a fully customized " "installation." msgstr "" "%s\n" "\n" "Hvis du ikke vil gøre dette, kan du fortsætte installationen ved at oprette " "partitionerne manuelt, eller du kan gå tilbage og lave en manuel, " "brugerdefineret installation." #: ../iw/rootpartition_gui.py:313 msgid "Automatic Partitioning Failed" msgstr "Automatisk partitionering fejlede" #: ../iw/rootpartition_gui.py:314 msgid "" "\n" "There is not sufficient disk space in order to automatically partition your " "disk. You will need to manually partition your disks for Red Hat Linux to " "install.\n" "\n" "Please choose the tool you would like to use to partition your system for " "Red Hat Linux." msgstr "" "\n" "Der er ikke nok diskplads til at automatisk opdele din disk. Du må " "partitionere dine diske manuelt for at Red Hat Linux kan installeres.\n" "\n" "Venligst vælg det værktøj som du vil bruge til partitionering af dit system " "for Red Hat Linux." #: ../iw/rootpartition_gui.py:321 msgid "Manual Partitioning" msgstr "Manuel partitionering" #: ../iw/rootpartition_gui.py:322 msgid "" "\n" "Please choose the tool you would like to use to partition your system for " "Red Hat Linux." msgstr "" "\n" "Venligst vælg det værktøj som du vil bruge til partitionering af dit system " "for Red Hat Linux." #: ../iw/rootpartition_gui.py:336 msgid "Automatically partition and REMOVE DATA" msgstr "Automatisk partitionering og FJERN DATA" #: ../iw/rootpartition_gui.py:343 msgid "Manually partition with Disk Druid" msgstr "Manuel partitionering med Disk druiden" #: ../iw/rootpartition_gui.py:355 msgid "Manually partition with fdisk [experts only]" msgstr "Manuel partitionering med 'fdisk' [for eksperter]" #: ../iw/rootpartition_gui.py:378 msgid "Boot Partition Location Warning" msgstr "" #: ../iw/rootpartition_gui.py:399 ../textw/partitioning_text.py:366 msgid "" "You have put the partition containing the kernel (the boot partition) above " "the 1023 cylinder limit, and it appears that this systems BIOS does not " "support booting from above this limit. Proceeding will most likely make the " "system unable to reboot into Linux.\n" "\n" "If you choose to proceed, it is HIGHLY recommended you make a boot floppy " "when asked. This will guarantee you have a way to boot into the system after " "installation.\n" "\n" "Are you sure you want to proceed?" msgstr "" #: ../iw/rootpartition_gui.py:412 ../textw/partitioning_text.py:386 msgid "" "You have put the partition containing the kernel (the boot partition) above " "the 1023 cylinder limit. It appears that this systems BIOS supports booting " "from above this limit. \n" "\n" "It is HIGHLY recommended you make a boot floppy when asked by the installer, " "as this is a new feature in recent motherboards and is not always reliable. " "Making a boot disk will guarantee you can boot your system once installed." msgstr "" #: ../iw/silo_gui.py:20 msgid "Silo Configuration" msgstr "Silo-konfiguration" #: ../iw/silo_gui.py:164 msgid "Install SILO boot record on:" msgstr "Installér SILO-'boot record' på:" #: ../iw/silo_gui.py:181 msgid "Create PROM alias" msgstr "Opret PROM-alias" #: ../iw/silo_gui.py:204 msgid "Set default PROM boot device to linux" msgstr "Sæt standard PROM-opstartsenhed til linux" #: ../iw/silo_gui.py:236 msgid "Do not install SILO" msgstr "Installér ikke SILO" #: ../iw/timezone_gui.py:31 ../textw/timezone_text.py:89 msgid "Time Zone Selection" msgstr "Valg af tidszone" #. pick New York City as default #: ../gnome-map/gglobe-canvas.c:781 ../gnome-map/timezonemapmodule.c:766 #: ../gnome-map/timezonemapmodule.c:768 ../iw/timezone_gui.py:140 msgid "America/New_York" msgstr "Amerika/New _York" #: ../iw/timezone_gui.py:157 msgid "View:" msgstr "Vis:" #: ../iw/timezone_gui.py:165 ../iw/timezone_gui.py:166 msgid "System clock uses UTC" msgstr "Systemur benytter UTC" #: ../iw/timezone_gui.py:214 msgid "Use Daylight Saving Time (US only)" msgstr "Brug \"Daylight Saving Time\" (kun i USA)" #: ../iw/timezone_gui.py:228 msgid "Location" msgstr "Placering" #: ../iw/timezone_gui.py:229 msgid "UTC Offset" msgstr "UTC-afstand" #: ../iw/welcome_gui.py:82 msgid "Would you like to configure your system?" msgstr "Ønsker du at indstille dit system?" #: ../iw/xconfig_gui.py:15 msgid "Horizontal Frequency Range" msgstr "Vandret frekvensområde" #: ../iw/xconfig_gui.py:16 msgid "Vertical Frequency Range" msgstr "Lodret frekvensområde" #: ../iw/xconfig_gui.py:17 msgid "Test failed" msgstr "Test fejlede" #: ../iw/xconfig_gui.py:25 #, fuzzy msgid "Customize Graphics Configuration" msgstr "Personlig X-konfiguration" #: ../iw/xconfig_gui.py:257 msgid "Color Depth:" msgstr "" #: ../iw/xconfig_gui.py:285 msgid "Screen Resolution:" msgstr "" #: ../iw/xconfig_gui.py:395 msgid " Test Setting " msgstr "" #: ../iw/xconfig_gui.py:412 msgid "Please choose your default desktop environment:" msgstr "" #: ../iw/xconfig_gui.py:422 ../iw/xconfig_gui.py:487 msgid "GNOME" msgstr "Gnome" #: ../iw/xconfig_gui.py:424 ../iw/xconfig_gui.py:501 msgid "KDE" msgstr "KDE" #: ../iw/xconfig_gui.py:467 msgid "Your desktop environment is:" msgstr "" #: ../iw/xconfig_gui.py:512 msgid "Please choose your login type:" msgstr "" #: ../iw/xconfig_gui.py:521 #, fuzzy msgid "Text" msgstr "Næste" #: ../iw/xconfig_gui.py:522 #, fuzzy msgid "Graphical" msgstr "Brug grafisk logind" #: ../iw/xconfig_gui.py:562 msgid "Bits per Pixel" msgstr "Bit per pixel" #: ../iw/xconfig_gui.py:582 msgid "Monitor Configuration" msgstr "Skærmkonfiguration" #: ../iw/xconfig_gui.py:934 msgid "Horizontal Sync" msgstr "Vandret synkron." #: ../iw/xconfig_gui.py:943 msgid "Vertical Sync" msgstr "Lodret synkron." #: ../iw/xconfig_gui.py:955 ../iw/xconfig_gui.py:1754 msgid "Restore original values" msgstr "" #: ../iw/xconfig_gui.py:967 #, fuzzy msgid "Horizontal Sync:" msgstr "Vandret synkron." #: ../iw/xconfig_gui.py:969 #, fuzzy msgid "Vertical Sync:" msgstr "Lodret synkron." #: ../iw/xconfig_gui.py:975 msgid "Hz" msgstr "" #: ../iw/xconfig_gui.py:978 msgid "kHz" msgstr "" #: ../iw/xconfig_gui.py:1160 msgid "" "Your video ram size can not be autodetected. Choose your video ram size " "from the choices below:" msgstr "" "Kan ikke identificere mængden af hukommelse på grafikkortet. Vælg mængden " "af video-hukommelse fra listen herunder:" #: ../iw/xconfig_gui.py:1171 ../iw/xconfig_gui.py:1192 msgid "" "In most cases your video hardware can be probed to automatically determine " "the best settings for your display." msgstr "" "I de fleste tilfælde kan din grafikgrej undersøges for automatisk at " "identificere de optimale indstillinger for din skærm." #: ../iw/xconfig_gui.py:1180 msgid "" "If the probed settings do not match your hardware select the correct setting " "below:" msgstr "" "Hvis de fundne indstillinger ikke passer til din maskine, så vælg de " "korrekte indstillinger herunder:" #: ../iw/xconfig_gui.py:1201 msgid "Autoprobe results:" msgstr "X-testresultater:" #: ../iw/xconfig_gui.py:1687 #, fuzzy msgid "Video card RAM: " msgstr "Grafikkort" #: ../iw/xconfig_gui.py:1758 msgid "Skip X Configuration" msgstr "Undlad X-konfiguration" #: ../textw/bootdisk_text.py:13 msgid "" "A custom boot disk provides a way of booting into your Linux system without " "depending on the normal bootloader. This is useful if you don't want to " "install lilo on your system, another operating system removes lilo, or lilo " "doesn't work with your hardware configuration. A custom boot disk can also " "be used with the Red Hat rescue image, making it much easier to recover from " "severe system failures.\n" "\n" "Would you like to create a boot disk for your system?" msgstr "" "En opstartsdiskette giver mulighed for at starte dit Linux system op uden at " "være afhængig af den normale opstartsindlæser. Dette er praktisk hvis du " "ikke ønsker at installere lilo på dit system, hvis et andet operativsystem " "har fjernet lilo eller lilo ikke virker med din maskines konfiguration. En " "opstartsdiskette kan desuden bruges sammen med Red Hat redningsdisketten, " "som gør det meget lettere at reparere systemet efter alvorlige systemfejl.\n" "\n" "Ønsker du at oprette en opstartsdiskette for dette system?" #: ../textw/bootdisk_text.py:32 msgid "" "\n" "On SMCC made Ultra machines floppy booting probably does not work\n" "\n" msgstr "" "\n" "Disketteopstart virker formentlig ikke med en Ultra maskine fra SMCC\n" "\n" #: ../textw/bootdisk_text.py:35 ../textw/bootdisk_text.py:56 msgid "Bootdisk" msgstr "Opstartsdiskette" #: ../textw/bootdisk_text.py:54 ../textw/bootdisk_text.py:62 #: ../textw/bootdisk_text.py:73 ../textw/lilo_text.py:33 #: ../textw/silo_text.py:25 msgid "Skip" msgstr "Spring over" #: ../textw/bootdisk_text.py:57 msgid "" "If you have the install floppy in your drive, first remove it. Then insert a " "blank floppy in the first floppy drive. All data on this disk will be erased " "during creation of the boot disk." msgstr "" "Hvis du har installeringsdisketten i diskettedrevet, så fjern den først. " "Indsæt så en tom diskette i diskettedrevet. Alle data på denne diskette vil " "blive slettet under oprettelsen af opstartsdisketten." #: ../textw/firewall_text.py:13 msgid "" "A firewall protects against unauthorized network intrusions. High security " "blocks all incoming accesses. Medium blocks access to system services (such " "as telnet or printing), but allows other connections. No firewall allows all " "connections and is not recommended. " msgstr "" #: ../textw/firewall_text.py:29 msgid "Security Level:" msgstr "" #: ../textw/firewall_text.py:58 #, fuzzy msgid "Trusted Devices:" msgstr "Anvendt RAID-enhed" #: ../textw/firewall_text.py:80 msgid "DHCP" msgstr "" #: ../textw/firewall_text.py:82 msgid "SSH" msgstr "" #: ../textw/firewall_text.py:84 #, fuzzy msgid "Telnet" msgstr "Slet" #: ../textw/firewall_text.py:86 msgid "WWW (HTTP)" msgstr "" #: ../textw/firewall_text.py:88 msgid "Mail (SMTP)" msgstr "" #: ../loader/loader.c:1220 ../loader/loader.c:1229 #: ../textw/firewall_text.py:90 msgid "FTP" msgstr "Ftp" #: ../textw/firewall_text.py:94 #, fuzzy msgid "Other ports" msgstr "Printer-understøttelse" #: ../textw/firewall_text.py:120 #, fuzzy msgid "Invalid Choice" msgstr "Redigér opstartsnavn" #: ../textw/firewall_text.py:121 msgid "You cannot customize a disabled firewall." msgstr "" #: ../textw/firewall_text.py:126 #, fuzzy msgid "Firewall Configuration - Customize" msgstr "Konfiguration er komplet" #: ../textw/firewall_text.py:128 msgid "" "You can customize your firewall in two ways. First, you can select to allow " "all traffic from certain network interfaces. Second, you can allow certain " "protocols explicitly through the firewall. Specify additional ports in the " "form 'service:protocol', such as 'imap:tcp'. " msgstr "" #: ../textw/lilo_text.py:21 ../textw/silo_text.py:14 msgid "" "A few systems will need to pass special options to the kernel at boot time " "for the system to function properly. If you need to pass boot options to the " "kernel, enter them now. If you don't need any or aren't sure, leave this " "blank." msgstr "" "Nogle få systemer har brug for at få anført særlige parametre til kernen " "under opstarten for at systemet kan fungere. Hvis du har brug for at tilføje " "opstartsparametre til kernen, så indtast dem nu. Hvis du ikke behøver det " "eller er i tvivl, så lad dette felt stå tomt." #: ../textw/lilo_text.py:91 ../textw/silo_text.py:103 msgid "Where do you want to install the bootloader?" msgstr "Hvor vil du installere opstartslæseren" #: ../textw/lilo_text.py:123 ../textw/silo_text.py:136 #: ../textw/silo_text.py:157 msgid "Clear" msgstr "Ryd" #: ../textw/lilo_text.py:132 msgid "Edit Boot Label Please" msgstr "Redigér opstartsnavn" #: ../textw/lilo_text.py:150 ../textw/lilo_text.py:155 msgid "Invalid Boot Label" msgstr "Redigér opstartsnavn" #: ../textw/lilo_text.py:151 msgid "Boot label may not be empty." msgstr "Opstartsnavn må ikke være tom." #: ../textw/lilo_text.py:156 msgid "Boot label contains illegal characters." msgstr "Opstartsnavn indeholder ugyldige tegn." #: ../textw/lilo_text.py:212 ../textw/silo_text.py:208 msgid "" "The boot manager Red Hat uses can boot other operating systems as well. You " "need to tell me what partitions you would like to be able to boot and what " "label you want to use for each of them." msgstr "" "Opstartsprogrammet, som Red Hat bruger, kan også starte andre " "operativsystemer. Skriv hvilke partitioner du gerne vil kunne starte samt et " "navn for hvert af disse operativsystemer." #: ../textw/mouse_text.py:26 msgid "What device is your mouse located on?" msgstr "Hvilken enhed befinder din mus sig på? %s %i" #: ../textw/mouse_text.py:57 msgid "Which model mouse is attached to this computer?" msgstr "Hvilken musetype er forbundet til denne maskine?" #: ../textw/mouse_text.py:68 msgid "Emulate 3 Buttons?" msgstr "Emulér 3 knapper?" #: ../textw/mouse_text.py:71 msgid "Mouse Selection" msgstr "Musevalg" #: ../textw/network_text.py:66 msgid "Use bootp/dhcp" msgstr "Benyt bootp/dhcp" #: ../loader/net.c:286 ../textw/network_text.py:71 msgid "IP address:" msgstr "IP-adresse:" #: ../loader/net.c:289 ../textw/network_text.py:72 msgid "Netmask:" msgstr "Netmaske:" #: ../loader/net.c:292 ../textw/network_text.py:73 msgid "Default gateway (IP):" msgstr "Standard-gateway (IP):" #: ../loader/net.c:295 ../textw/network_text.py:74 msgid "Primary nameserver:" msgstr "Primær navneserver:" #: ../textw/network_text.py:75 #, fuzzy msgid "Secondary nameserver:" msgstr "Primær navneserver:" #: ../textw/network_text.py:76 #, fuzzy msgid "Ternary nameserver:" msgstr "Primær navneserver:" #: ../textw/network_text.py:121 msgid "Invalid information" msgstr "Ugyldig information" #: ../textw/network_text.py:122 msgid "You must enter valid IP information to continue" msgstr "Du skal indtaste gyldig IP-information for at fortsætte" #: ../textw/network_text.py:157 msgid "Hostname Configuration" msgstr "Værtsnavnskonfiguration" #: ../textw/network_text.py:158 msgid "" "The hostname is the name of your computer. If your computer is attached to " "a network, this may be assigned by your network administrator." msgstr "" "Værtsnavnet er det navn, du giver din maskine. Hvis maskinen er tilsluttet " "et netværk, skal din netværksadministrator muligvis tildele dig et navn." #: ../textw/packages_text.py:91 msgid "Package :" msgstr "Pakke :" #: ../textw/packages_text.py:96 msgid "Size :" msgstr "Størrelse: " #: ../textw/packages_text.py:97 #, c-format msgid "%.1f KBytes" msgstr "" #: ../textw/packages_text.py:116 msgid "Total size" msgstr "Totalt" #: ../textw/packages_text.py:249 msgid "" " ,<+>,<-> selection | help | package description" msgstr "" " ,<+>,<-> valg | hjælp | pakkebeskrivelse " #: ../textw/packages_text.py:306 msgid "" "Some of the packages you have selected to install require packages you have " "not selected. If you just select Ok all of those required packages will be " "installed." msgstr "" "Nogle af de pakker du har valgt at installere kræver pakker som du ikke har " "valgt for at virke. Hvis du vælger Ok, vil alle disse påkrævede pakker blive " "installeret." #: ../textw/partitioning_text.py:14 ../textw/partitioning_text.py:57 msgid "Disk Setup" msgstr "Diskopsætning" #: ../textw/partitioning_text.py:15 msgid "" "Disk Druid is a tool for partitioning and setting up mount points. It is " "designed to be easier to use than Linux's traditional disk partitioning " "sofware, fdisk, as well as more powerful. However, there are some cases " "where fdisk may be preferred.\n" "\n" "Which tool would you like to use?" msgstr "" "Diskdruiden er et værktøj til at lave partitioner og opsætte " "monteringspunkter. Det er designet til at være lettere at bruge end Linux's " "traditionelle diskpartitioneringsprogram 'fdisk', og har flere faciliteter. " "Der er dog tilfælde hvor fdisk bør foretrækkes.\n" "\n" "Hvilket værktøj vil du bruge?" #: ../textw/partitioning_text.py:58 msgid "" "To install Red Hat Linux, you must have at least one partition of 150 MB " "dedicated to Linux. We suggest placing that partition on one of the first " "two hard drives in your system so you can boot into Linux with LILO." msgstr "" "For at installere Red Hat Linux skal du have mindst én partition med 150 Mb " "bare til Linux. Vi anbefaler at du placerer den partition på én af de to " "første harddiske på dit system så du kan starte op med Linux ved hjælp af " "LILO." #: ../loader/loader.c:333 ../loader/loader.c:358 #: ../textw/partitioning_text.py:63 msgid "Done" msgstr "Færdig" #: ../textw/partitioning_text.py:153 ../textw/partitioning_text.py:155 msgid "Continue" msgstr "Fortsæt" #: ../textw/partitioning_text.py:153 msgid "Manually partition" msgstr "Manuel partitionering" #: ../textw/partitioning_text.py:234 msgid "" "What partitions would you like to format? We strongly suggest formatting all " "of the system partitions, including /, /usr, and /var. There is no need to " "format /home or /usr/local if they have already been configured during a " "previous install." msgstr "" "Hvilke partitioner vil du formatere? Vi anbefaler kraftigt at du formaterer " "alle dine systempartitioner, inklusive /, /usr og /var. Der er ingen grund " "til at formatere /home eller /usr/local hvis de allerede er blevet " "konfigureret under en tidligere installation." #: ../textw/partitioning_text.py:254 msgid "Check for bad blocks during format" msgstr "Se efter beskadigede blokke under formatering" #: ../textw/partitioning_text.py:259 msgid "Choose Partitions to Format" msgstr "Vælg partitioner at formatere" #: ../textw/partitioning_text.py:316 msgid "Root filesystem size" msgstr "Rodfilsystemstørrelse" #: ../textw/partitioning_text.py:317 msgid "Swap space" msgstr "Swapplads" #: ../textw/partitioning_text.py:327 ../textw/partitioning_text.py:333 #: ../textw/partitioning_text.py:340 msgid "Bad Size" msgstr "Ugyldig størrelse" #: ../textw/partitioning_text.py:328 msgid "The size you enter must be a number." msgstr "Størrelsen, du angiver, skal være et tal." #: ../textw/partitioning_text.py:334 #, c-format msgid "" "The total size must be smaller then the amount of free space on the disk, " "which is %d megabytes." msgstr "" "Den totale størrelse skal være mindre end mængden af ledig plads på disken, " "som er %d megabyte." #: ../textw/partitioning_text.py:341 msgid "" "Neither the root file system size nor the swap space size may be greater " "then 2000 megabytes." msgstr "" "Hverken rod-filsystemet eller swappladsen kan være større end 2000 megabyte." #: ../textw/silo_text.py:66 msgid "Create PROM alias `linux'" msgstr "Opret PROM-alias `linux'" #: ../textw/silo_text.py:67 msgid "Set default PROM boot device" msgstr "Angiv standard PROM-opstartsenhed" #: ../textw/silo_text.py:144 msgid "Edit Boot Label" msgstr "Redigér opstartsnavn" #: ../textw/timezone_text.py:71 msgid "What time zone are you located in?" msgstr "Hvilken tidszone befinder du dig i?" #: ../textw/timezone_text.py:86 msgid "Hardware clock set to GMT?" msgstr "Sæt indbygget ur til GMT?" #: ../textw/userauth_text.py:11 msgid "" "Pick a root password. You must type it twice to ensure you know what it is " "and didn't make a mistake in typing. Remember that the root password is a " "critical part of system security!" msgstr "" "Vælg en 'root'-adgangskode. Du skal skrive det to gange for at sikre at du " "véd hvad det er og ikke taster forkert (caps lock). Husk at " "'root'-adgangskoden er meget vigtig for systemets sikkerhed!" #: ../loader/urls.c:345 ../textw/userauth_text.py:24 msgid "Password:" msgstr "Adgangskode:" #: ../textw/userauth_text.py:25 msgid "Password (again):" msgstr "Adgangskode (igen):" #: ../textw/userauth_text.py:41 ../textw/userauth_text.py:108 msgid "Password Length" msgstr "Adgangskodelængde" #: ../textw/userauth_text.py:42 msgid "The root password must be at least 6 characters long." msgstr "'Root'-adgangskoden skal være på mindst 6 tegn." #: ../textw/userauth_text.py:46 ../textw/userauth_text.py:116 msgid "Password Mismatch" msgstr "Adgangskode stemmer ikke" #: ../textw/userauth_text.py:47 ../textw/userauth_text.py:117 msgid "The passwords you entered were different. Please try again." msgstr "De to adgangskoder du indtastede var ikke éns. Prøv igen." #: ../textw/userauth_text.py:72 msgid "Edit User" msgstr "Redigér bruger" #: ../textw/userauth_text.py:75 msgid "Add User" msgstr "Tilføj bruger" #: ../textw/userauth_text.py:80 msgid "User ID" msgstr "Bruger-ID" #: ../textw/userauth_text.py:95 msgid "Bad User ID" msgstr "Ugyldig bruger-ID" #: ../textw/userauth_text.py:96 msgid "" "User IDs must be less than 8 characters and contain only characters A-Z, " "a-z, and 0-9." msgstr "" "Bruger-ID'er skal være på mindre end 8 tegn og må kun indeholde tegnene A-Z, " "a-z og tallene 0-9." #: ../textw/userauth_text.py:103 msgid "Missing User ID" msgstr "Manglende bruger-ID" #: ../textw/userauth_text.py:104 msgid "You must provide a user ID" msgstr "Du skal komme med en bruger-ID" #: ../textw/userauth_text.py:109 msgid "The password must be at least 6 characters long." msgstr "Adgangskoden skal være på mindst 6 tegn." #: ../textw/userauth_text.py:125 ../textw/userauth_text.py:133 msgid "User Exists" msgstr "Bruger eksisterer" #: ../textw/userauth_text.py:126 msgid "" "The root user is already configured. You don't need to add this user here." msgstr "" "'root'-brugeren er allerede konfigureret. Du behøver ikke at tilføje denne " "bruger her." #: ../textw/userauth_text.py:134 msgid "This user id already exists. Choose another." msgstr "Denne bruger-ID eksisterer allerede. Vælg en anden." #: ../textw/userauth_text.py:161 msgid "" "You should use a normal user account for most activities on your system. By " "not using the root account casually, you'll reduce the chance of disrupting " "your system's configuration." msgstr "" "Du bør bruge en almindelig brugerkonto for de fleste aktiviteter på dit " "system. Ved ikke at bruge root kontoen til daglig reducerer du faren for at " "beskadige din systemkonfiguration." #: ../textw/userauth_text.py:174 msgid "" "What user account would you like to have on the system? You should have at " "least one non-root account for normal work, but multi-user systems can have " "any number of accounts set up." msgstr "" "Hvilken brugerkonto vil du gerne have på systemet? Du bør have mindst én " "ikke-'root'-konto til dit almindelige arbejde, men flerbrugersystemer kan " "opsætte så mange kontoer som behøves." #: ../textw/userauth_text.py:184 msgid "User name" msgstr "Brugernavn" #: ../textw/userauth_text.py:211 msgid "Enter the information for the user." msgstr "Indtast brugerens informationer." #: ../textw/userauth_text.py:229 msgid "Change the information for this user." msgstr "Ændr denne brugers informationer." #: ../textw/userauth_text.py:301 msgid "Use Shadow Passwords" msgstr "Brug skygge-adgangskoder" #: ../textw/userauth_text.py:303 msgid "Enable MD5 Passwords" msgstr "Brug MD5-adgangskoder" #: ../textw/userauth_text.py:314 msgid "NIS Domain:" msgstr "NIS-domæne:" #: ../textw/userauth_text.py:316 msgid "NIS Server:" msgstr "NIS-tjener:" #: ../textw/userauth_text.py:318 msgid "or use:" msgstr "eller brug:" #: ../textw/userauth_text.py:321 msgid "Request server via broadcast" msgstr "Spørg efter tjener via rundkastning" #: ../textw/userauth_text.py:360 msgid "Use TLS connections" msgstr "" #: ../installclasses/custom.py:9 msgid "Custom System" msgstr "Egendefineret system" #: ../installclasses/custom.py:23 ../installclasses/workstation.py:30 msgid "" "You are about to erase any preexisting Linux installations on your system." msgstr "" "Du er ved at slette alle eksisterende Linux-installationer på dit system." #: ../installclasses/laptop.py:7 msgid "Laptop" msgstr "" #: ../installclasses/server.py:8 msgid "Server System" msgstr "Tjenersystem (server)" #: ../installclasses/server.py:38 msgid "" "You are about to erase ALL DATA on your hard drive to make room for your " "Linux installation." msgstr "" "Du er ved at slette ALLE DATA på din harddisk for at få plads til din Linux " "installation." #: ../installclasses/workstation.py:7 ../libfdisk/gnomefsedit.c:2575 msgid "Workstation" msgstr "Arbejdsstation" #: ../libfdisk/fsedit.c:399 msgid "partitioning did not meet requirements" msgstr "partitionering opfylder ikke kravene" #: ../libfdisk/fsedit.c:917 ../libfdisk/fsedit.c:924 ../libfdisk/fsedit.c:931 #: ../libfdisk/fsedit.c:940 ../libfdisk/fsedit.c:967 ../libfdisk/fsedit.c:980 #: ../libfdisk/fsedit.c:990 msgid "Bad Mount Point" msgstr "Ugyldigt monteringspunkt" #: ../libfdisk/fsedit.c:918 #, c-format msgid "The %s directory must be on the root filesystem." msgstr "%s kataloget skal ligge på rodfilsystemet." #: ../libfdisk/fsedit.c:925 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points must begin with a leading /." msgstr "" "Monteringspunktet %s er ugyldigt.\n" "\n" "Monteringspunkter skal begynde med et /." #: ../libfdisk/fsedit.c:932 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may not end with a /." msgstr "" "Monteringspunktet %s er ugyldigt.\n" "\n" "Monteringspunkter må ikke ende på et /." #: ../libfdisk/fsedit.c:941 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may only printable characters." msgstr "" "Monteringspunktet %s er ugyldigt.\n" "\n" "Monteringspunkter må kun indeholde udskrivbare tegn." #: ../libfdisk/fsedit.c:949 msgid "" "You've asked to put your root (/) filesystem on a DOS-style FAT partition. " "You can do this, but you may not use any other filesystems for your Linux " "system. Additionally, there will be a speed penalty for not using " "Linux-native partitions. Do you want to continue?" msgstr "" "Du har bedt om at lægge dit rodfilsystem (/) på en DOS FAT partition. Det er " "tilladt, men så kan du ikke bruge andre filsystemer under Linux. Desuden vil " "systemet køre langsommere når du ikke bruger Linux's almindelige filsystem. " "Vil du fortsætte?" #: ../libfdisk/fsedit.c:968 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "System partitions must be on Linux Native partitions." msgstr "" "Monteringspunktet %s er ugyldigt.\n" "\n" "Systempartitioner skal ligge på ægte Linux-partitioner." #: ../libfdisk/fsedit.c:981 #, c-format msgid "On this platform, /boot must be on a DOS-compatible filesystem %x." msgstr "På denne platform skal /boot ligge på et DOS-kompatibelt filsystem %x." #: ../libfdisk/fsedit.c:991 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "/usr must be on a Linux Native partition or an NFS volume." msgstr "" "Monteringspunktet %s er ugyldigt.\n" "\n" "/usr skal ligge på en ægte Linux-partition eller et NFS-volumen." #: ../libfdisk/fsedit.c:1019 msgid "Too Many Drives" msgstr "For mange drev" #: ../libfdisk/fsedit.c:1020 msgid "" "You have more drives than this program supports. Please use the standard " "fdisk program to setup your drives and please notify Red Hat Software that " "you saw this message." msgstr "" "Du har flere drev end dette program kan håndtere. Brug venligst standard " "programmet 'fdisk' til at opsætte dine drev og giv venligst besked til Red " "Hat Software om at du fik denne besked." #: ../libfdisk/fsedit.c:1029 msgid "Error Creating Device Nodes" msgstr "Fejl ved oprettelse af enheds-noder" #: ../libfdisk/fsedit.c:1030 #, fuzzy msgid "" "An error has occurred while trying to create device nodes for the hard " "drives in your system. This may be because you have run out of disk space " "on the /tmp partition." msgstr "" "En fejl opstod ved forsøg på at oprette enheds-noder for diskdrevene i dit " "system. Dette er måske fordi du er løbet tør for diskplads på /tmp " "partitionen." #: ../libfdisk/fsedit.c:1046 msgid "No Drives Found" msgstr "Ingen drev fundet" #: ../libfdisk/fsedit.c:1047 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem." msgstr "" "En fejl er opstået - ingen gyldige enheder blev fundet på hvilke nye " "filsystemer kunne oprettes. Tjek venligst din maskine for at finde grunden " "til dette problem." #: ../libfdisk/fsedit.c:1375 ../libfdisk/fsedit.c:1438 #, c-format msgid "" "An error occurred reading the partition table for the block device %s. The " "error was" msgstr "" "En fejl opstod under læsning af partitionstabellen for blokenheden %s. " "Fejlen var" #: ../libfdisk/fsedit.c:1415 #, c-format msgid "" "The partition table on device %s is corrupted. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive." msgstr "" "Partitionstabellen på enheden %s er ødelagt. For at oprette nye partitioner " "skal den initialiseres, hvilket vil medføre tab af ALLE DATA på dette drev." #: ../libfdisk/fsedit.c:1420 msgid "Bad Partition Table" msgstr "Ugyldig partitionstabel" #: ../libfdisk/fsedit.c:1421 msgid "Initialize" msgstr "Initialisér" #: ../libfdisk/fsedit.c:1421 ../libfdisk/fsedit.c:1442 msgid "Skip Drive" msgstr "Spring drev over" #: ../libfdisk/fsedit.c:1442 ../loader/net.c:256 ../loader/net.c:381 msgid "Retry" msgstr "Prøv igen" #: ../libfdisk/fsedit.c:1454 msgid "BSD Disklabel" msgstr "BSD-disknavn" #: ../libfdisk/fsedit.c:1454 msgid "" "A disk with a BSD disklabel has been found. The Red Hat installation only " "supports BSD Disklabels in read-only mode, so you must use a custom install " "and fdisk (instead of Disk Druid) for machines with BSD Disklabels." msgstr "" "Et drev med en BSD-disknavn blev fundet. Red Hat's installation understøtter " "kun BSD-disknavne i skrivebeskyttet modus, så du er nødt til at køre en " "manuel installation og 'fdisk' (istedetfor Diskdruiden) for maskiner med " "BSD-disknavne." #: ../libfdisk/fsedit.c:1484 #, c-format msgid "System error %d" msgstr "Systemfejl %d" #: ../libfdisk/fsedit.c:1493 ../libfdisk/fsedit.c:1495 msgid "Fdisk Error" msgstr "Fdisk-fejl" #: ../libfdisk/gnomefsedit.c:551 ../libfdisk/gnomefsedit.c:856 #: ../libfdisk/gnomefsedit.c:1951 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:559 ../libfdisk/gnomefsedit.c:858 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:733 ../libfdisk/newtfsedit.c:860 msgid "Delete Partition" msgstr "Slet partition" #: ../libfdisk/gnomefsedit.c:734 ../libfdisk/newtfsedit.c:861 msgid "Are you sure you want to delete this partition?" msgstr "Er du sikker på at du vil slette denne partition?" #: ../libfdisk/gnomefsedit.c:783 ../libfdisk/newtfsedit.c:346 msgid "Cannot Edit Partitions" msgstr "Redigér partition" #: ../libfdisk/gnomefsedit.c:784 ../libfdisk/newtfsedit.c:347 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "edit other partitions." msgstr "" "Du har defineret '/' filsystemet på en ikke-ext2 partition, så du kan ikke " "redigere andre partitioner." #: ../libfdisk/gnomefsedit.c:802 ../libfdisk/gnomefsedit.c:808 #: ../libfdisk/gnomefsedit.c:812 ../libfdisk/gnomefsedit.c:814 #: ../libfdisk/newtfsedit.c:370 ../libfdisk/newtfsedit.c:376 #: ../libfdisk/newtfsedit.c:380 ../libfdisk/newtfsedit.c:382 msgid "Edit Partition" msgstr "Redigér partition" #: ../libfdisk/gnomefsedit.c:829 ../libfdisk/gnomefsedit.c:1934 #: ../libfdisk/newtfsedit.c:391 msgid "Mount Point:" msgstr "Monteringspunkt:" #: ../libfdisk/gnomefsedit.c:871 ../libfdisk/newtfsedit.c:410 msgid "Size (Megs):" msgstr "Størrelse (Mb):" #: ../libfdisk/gnomefsedit.c:903 msgid "Use remaining space?" msgstr "Brug eksisterende ledig plads?" #: ../libfdisk/gnomefsedit.c:922 ../libfdisk/newtfsedit.c:442 msgid "Allocation Status:" msgstr "Tildelningsstatus:" #: ../libfdisk/gnomefsedit.c:926 ../libfdisk/newtfsedit.c:444 msgid "Successful" msgstr "Succés" #: ../libfdisk/gnomefsedit.c:929 ../libfdisk/newtfsedit.c:446 msgid "Failed" msgstr "Fiasko" #: ../libfdisk/gnomefsedit.c:941 ../libfdisk/newtfsedit.c:451 msgid "Failure Reason:" msgstr "Årsag til fejl:" #: ../libfdisk/gnomefsedit.c:955 ../libfdisk/gnomefsedit.c:1972 msgid "Partition Type:" msgstr "Partitionstype:" #: ../libfdisk/gnomefsedit.c:1038 ../libfdisk/newtfsedit.c:521 msgid "Allowable Drives:" msgstr "Tilladte drev:" #: ../libfdisk/gnomefsedit.c:1141 ../libfdisk/gnomefsedit.c:2171 #: ../libfdisk/newtfsedit.c:612 msgid "No Mount Point" msgstr "Intet monteringspunkt" #: ../libfdisk/gnomefsedit.c:1142 ../libfdisk/newtfsedit.c:613 msgid "" "You have not selected a mount point for this partition. Are you sure you " "want to do this?" msgstr "" "Du har ikke valgt et monteringspunkt for denne partition. Er du sikker på at " "du vil gøre dette?" #: ../libfdisk/gnomefsedit.c:1166 ../libfdisk/gnomefsedit.c:1203 #: ../libfdisk/gnomefsedit.c:2179 ../libfdisk/newtfsedit.c:636 #: ../libfdisk/newtfsedit.c:669 msgid "Mount Point Error" msgstr "Fejl ved monteringspunkt" #: ../libfdisk/gnomefsedit.c:1167 ../libfdisk/newtfsedit.c:637 msgid "" "You have tried to assign the '/' mount point to a FAT-style partition. You " "cannot do this now because mount points have been assigned to ext2 " "partitions also. Clear those mount points and then you will be able to " "assign '/' to this partition." msgstr "" "Du har forsøgt at tildele '/' monteringspunktet til en FAT-type partition. " "Du kan ikke gøre dette nu, fordi monteringspunkter også er blevet tildelt " "til ext2-partitioner.Fjern disse monteringspunkter, så vil du kunne tildele " "'/' til denne partition." #: ../libfdisk/gnomefsedit.c:1204 ../libfdisk/newtfsedit.c:670 msgid "" "The mount point requested is either an illegal path or is already in use. " "Please select a valid mount point." msgstr "" "Det ønskede monteringspunkt er enten en ugyldig sti eller er allerede i " "brug. Vælg venligst et gyldigt monteringspunkt." #: ../libfdisk/gnomefsedit.c:1237 ../libfdisk/newtfsedit.c:695 msgid "Size Error" msgstr "Størrelsesfejl" #: ../libfdisk/gnomefsedit.c:1238 ../libfdisk/newtfsedit.c:696 msgid "" "The size requested is illegal. Make sure the size is greater and zero (0), " "and is specified int decimal (base 10) format." msgstr "" "Den ønskede størrelse er ugyldig. Sørg for at størrelsen er større end nul " "(0) og er angivet som heltal i decimal (base 10) format." #: ../libfdisk/gnomefsedit.c:1256 ../libfdisk/gnomefsedit.c:2314 #: ../libfdisk/newtfsedit.c:714 msgid "Swap Size Error" msgstr "Fejl ved swapstørrelse" #: ../libfdisk/gnomefsedit.c:1257 ../libfdisk/gnomefsedit.c:2315 #: ../libfdisk/newtfsedit.c:715 #, c-format msgid "" "You have created a swap partition which is too large. The maximum size of a " "swap partition is %ld Megabytes." msgstr "" "Du har oprettet en swappartition der er for stor. Den maksimalt tilladte " "størrelse på en swappartition er %ld megabyte." #: ../libfdisk/gnomefsedit.c:1271 ../libfdisk/newtfsedit.c:731 #, c-format msgid "" "It is recommended that the root (/) partition have a minimum size of %ld " "Megabytes. You are trying to create one which is %ld Megabytes, which could " "cause the install to fail.\n" "\n" "Are you sure you want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1279 ../libfdisk/newtfsedit.c:739 msgid "Warning: Root FS Size" msgstr "" #: ../libfdisk/gnomefsedit.c:1291 msgid "No Drives Specified" msgstr "Ingen drev specificeret" #: ../libfdisk/gnomefsedit.c:1292 ../libfdisk/gnomefsedit.c:1309 msgid "Close" msgstr "Luk" #: ../libfdisk/gnomefsedit.c:1293 msgid "You must constrain this partition to at least one drive." msgstr "Du skal begrænse denne partition til kun et drev." #: ../libfdisk/gnomefsedit.c:1301 ../libfdisk/gnomefsedit.c:1308 msgid "No RAID Drive Constraint" msgstr "Ingen RAID-drevbegrænsning" #: ../libfdisk/gnomefsedit.c:1303 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive.\n" " Are you sure you want to do this?" msgstr "" "Du har konfigureret en RAID-partition uden at begrænse partitionen til et " "enkelt diskdrev.\n" "Er du sikker på at du vil gøre det?" #: ../libfdisk/gnomefsedit.c:1310 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive. Please select one drive to constrain this partition to." msgstr "" "Du har konfigureret en RAID-partition uden at begrænse partitionen til et " "enkelt drev. Vælg venligst det drev som du vil begrænse denne partition til." #: ../libfdisk/gnomefsedit.c:1430 ../libfdisk/newtfsedit.c:834 msgid "Cannot Add Partitions" msgstr "Ubrugte partitioner" #: ../libfdisk/gnomefsedit.c:1431 ../libfdisk/newtfsedit.c:835 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "add other partitions." msgstr "" "Du har defineret '/' filsystemet på en ikke-ext2 partition, så du kan ikke " "tilføje andre partitioner." #. XXXXX - for now destroy the raid entry since it #. now contains unallocated partitions! #: ../libfdisk/gnomefsedit.c:1505 msgid "RAID Entry Incomplete" msgstr "RAID-indgang ufuldstændig" #: ../libfdisk/gnomefsedit.c:1506 #, c-format msgid "" "The raid device /dev/%s now contains partitions which are unallocated. The " "raid device /dev/%s will now be decomposed into its component partitions. " "Please recompose the raid device with allocated partitions." msgstr "" "RAID-enheden /dev/%s indeholder stadig partitioner som ikke er i brug. " "RAID-enheden /dev/%s vil nu blive opdelt i sine del-partitioner. Genopbyg " "venligst RAID-enheden med brugte partitioner." #: ../libfdisk/gnomefsedit.c:1555 msgid "Cannot Remove /boot" msgstr "" #: ../libfdisk/gnomefsedit.c:1556 msgid "" "You cannot remove \"/boot\" if \"/\" is on a RAID device. Switch \"/\" to a " "non-RAID device first." msgstr "" #. build list of why they all failed #: ../libfdisk/gnomefsedit.c:1620 ../libfdisk/gnomefsedit.c:1639 #: ../libfdisk/newtfsedit.c:138 ../libfdisk/newtfsedit.c:1665 msgid "Unallocated Partitions" msgstr "Ubrugte partitioner" #: ../libfdisk/gnomefsedit.c:1624 ../libfdisk/gnomefsedit.c:1634 #: ../libfdisk/newtfsedit.c:142 msgid "" "There are currently unallocated partition(s) present in the list of " "requested partitions. The unallocated partition(s) are shown below, along " "with the reason they were not allocated." msgstr "" "Der er stadig en eller flere ubrugte partitioner i listen over ønskede " "partitioner. De ubrugte partition(er) er vist herunder sammen med årsagen " "til at de ikke er blevet brugt." #: ../libfdisk/gnomefsedit.c:1916 msgid "Cannot Edit Raid" msgstr "Kan ikke ændre RAID" #: ../libfdisk/gnomefsedit.c:1917 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "edit RAID devices." msgstr "" "Du har defineret '/' filsystemet på en ikke-ext2 partition, så du kan ikke " "redigere RAID-enheder." #: ../libfdisk/gnomefsedit.c:2017 msgid "RAID Device: /dev/" msgstr "RAID-enhed: /dev/" #: ../libfdisk/gnomefsedit.c:2040 msgid "RAID Type:" msgstr "RAID-type:" #: ../libfdisk/gnomefsedit.c:2077 msgid "Partitions For RAID Array:" msgstr "Partitioner for RAID-array:" #: ../libfdisk/gnomefsedit.c:2172 msgid "You have not selected a mount point. A mount point is required." msgstr "Du har ikke valgt et monteringspunkt. Et monteringspunkt er påkrævet." #: ../libfdisk/gnomefsedit.c:2180 msgid "" "The mount point requested is already in use. Please select a valid mount " "point." msgstr "" "Monteringspunktet er allerede i brug. Vælg venligst et gyldigt " "monteringspunkt." #: ../libfdisk/gnomefsedit.c:2216 msgid "" "The bootable raid device can only include partitions from the first two " "drives on your system.\n" "\n" "These drives are: " msgstr "" "Den opstartelige raid enhed kan kun indeholde partitioner fra de to første " "drev på dit system.\n" "\n" "Disse drev er: " #: ../libfdisk/gnomefsedit.c:2223 msgid "Booting From RAID Warning" msgstr "Opstart fra RAID-advarsel" #: ../libfdisk/gnomefsedit.c:2233 msgid "No RAID Device" msgstr "Ingen RAID-enhed" #: ../libfdisk/gnomefsedit.c:2234 msgid "You need to selected a RAID device." msgstr "Du skal vælge en RAID-enhed." #: ../libfdisk/gnomefsedit.c:2240 msgid "Used Raid Device" msgstr "Anvendt RAID-enhed" #: ../libfdisk/gnomefsedit.c:2241 #, c-format msgid "" "The raid device \"/dev/%s\" is already configured as a raid device. Please " "select another." msgstr "" "RAID-enheden \"/dev/%s\" er allerede konfigureret som en RAID-enhed. Vælg " "venligst en anden." #: ../libfdisk/gnomefsedit.c:2254 msgid "Not Enough Partitions" msgstr "Ikke nok partitioner" #: ../libfdisk/gnomefsedit.c:2256 msgid "" "You have not configured enough partitions for the RAID type you have " "selected." msgstr "" "Du har ikke konfigureret nok partitioner for den RAID-type du har valgt." #: ../libfdisk/gnomefsedit.c:2264 msgid "Illegal /boot RAID Type" msgstr "Ugyldig /boot RAID-type" #: ../libfdisk/gnomefsedit.c:2266 msgid "Boot partitions (/boot) are only allowed on RAID-1." msgstr "Opstartspartitioner (/boot) er kun tilladte på RAID-1." #: ../libfdisk/gnomefsedit.c:2274 msgid "Illegal RAID mountpoint" msgstr "Ugyldigt RAID-monteringspunkt" #: ../libfdisk/gnomefsedit.c:2276 #, fuzzy msgid "" "RAID partitions cannot be mounted as root (/) on Alpha without a /boot " "partition (non-RAID) as well." msgstr "RAID-partitioner kan ikke monteres som root (/) på Alpha." #: ../libfdisk/gnomefsedit.c:2360 #, c-format msgid "" "The partition %s is a pre-existing partition in the set of partitions for " "this RAID device. The mount point is set to /boot. Are you sure that it is " "possible to boot from this partition?" msgstr "" "Partitionen %s er allerede brugt i rækken af partitioner for denne " "RAID-enhed. Monteringspunktet er sat til /boot. Er du sikker på at det er " "muligt at lave systemopstart fra denne partition?" #: ../libfdisk/gnomefsedit.c:2367 msgid "Use Pre-existing Partition?" msgstr "Brug allerede-eksisterende partition?" #: ../libfdisk/gnomefsedit.c:2445 msgid "Cannot Add RAID Devices" msgstr "Ingen RAID-enhed" #: ../libfdisk/gnomefsedit.c:2446 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "add RAID devices." msgstr "" "Du har defineret '/' filsystemet på en ikke-ext2 partition, så du kan ikke " "tilføje RAID-enheder." #: ../libfdisk/gnomefsedit.c:2487 msgid "Auto-Partition" msgstr "Auto-partition" #: ../libfdisk/gnomefsedit.c:2494 msgid "Using Existing Disk Space" msgstr "Bruger eksisterende diskplads" #: ../libfdisk/gnomefsedit.c:2513 msgid "Remove Linux partitions" msgstr "Fjern Linux-partitioner" #: ../libfdisk/gnomefsedit.c:2524 msgid "Use existing free space" msgstr "Brug eksisterende ledig plads" #. workstation or server? #: ../libfdisk/gnomefsedit.c:2536 msgid "Intended Use" msgstr "Forventet brug" #: ../libfdisk/gnomefsedit.c:2555 ../libfdisk/gnomefsedit.c:2575 msgid "Server" msgstr "Tjener" #: ../libfdisk/gnomefsedit.c:2655 msgid "Delete RAID Device?" msgstr "Slet RAID-enhed?" #: ../libfdisk/gnomefsedit.c:2656 msgid "Are you sure you want to remove this RAID device?" msgstr "Er du sikker på at du vil fjerne denne RAID-enhed?" #: ../libfdisk/gnomefsedit.c:2709 ../libfdisk/newtfsedit.c:1770 msgid "Reset Partition Table" msgstr "Gendan partitionstabel" #: ../libfdisk/gnomefsedit.c:2711 ../libfdisk/newtfsedit.c:1772 msgid "Reset partition table to original contents? " msgstr "Gendan partitionstabel med det oprindelige indhold?" #: ../libfdisk/gnomefsedit.c:2747 ../libfdisk/gnomefsedit.c:2798 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2749 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2751 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:3035 msgid "Requested" msgstr "Anmodet" #: ../libfdisk/gnomefsedit.c:3036 msgid "Actual" msgstr "Faktisk" #: ../libfdisk/gnomefsedit.c:3209 msgid "Drive" msgstr "Drev" #: ../libfdisk/gnomefsedit.c:3210 msgid "Geom [C/H/S]" msgstr "Geom [C/H/S]" #: ../libfdisk/gnomefsedit.c:3211 msgid "Total (M)" msgstr "Total (M)" #: ../libfdisk/gnomefsedit.c:3212 msgid "Free (M)" msgstr "Fri (M)" #: ../libfdisk/gnomefsedit.c:3213 msgid "Used (M)" msgstr "Brugt (M)" #: ../libfdisk/gnomefsedit.c:3214 msgid "Used (%)" msgstr "Brugt (%)" #: ../libfdisk/gnomefsedit.c:3456 msgid "Unallocated Partitions Exist..." msgstr "Utildelte partitioner eksisterer..." #: ../libfdisk/gnomefsedit.c:3462 ../libfdisk/gnomefsedit.c:3480 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) or a " "RAID partition for the install to proceed." msgstr "" "Du skal tildele en rodpartition (/) til en ægte Linux-partition (ext2) eller " "en RAID-partition før installationen kan gå videre." #: ../libfdisk/gnomefsedit.c:3551 msgid "Partitions" msgstr "Partitioner" #: ../libfdisk/gnomefsedit.c:3581 msgid "_Add..." msgstr "_Tilføj..." #: ../libfdisk/gnomefsedit.c:3588 msgid "_Edit..." msgstr "_Redigér..." #: ../libfdisk/gnomefsedit.c:3589 msgid "_Reset" msgstr "_Nulstil" #: ../libfdisk/gnomefsedit.c:3594 msgid "_Delete" msgstr "_Slet" #. try having make raid device button available in read-only mode too #: ../libfdisk/gnomefsedit.c:3607 msgid "_Make RAID Device" msgstr "_Opret RAID-enhed" #: ../libfdisk/gnomefsedit.c:3617 msgid "Auto Partition" msgstr "Autopartition" #: ../libfdisk/gnomefsedit.c:3626 msgid "Drive Summary" msgstr "Drevresumé" #: ../libfdisk/newtfsedit.c:204 msgid "Swap Partition" msgstr "Swappartition" #: ../libfdisk/newtfsedit.c:210 msgid "Raid Partition" msgstr "RAID-partition" #: ../libfdisk/newtfsedit.c:365 msgid "Edit New Partition" msgstr "Redigér partition" #: ../libfdisk/newtfsedit.c:430 msgid "Use remaining space?:" msgstr "Brug ledig plads?:" #: ../libfdisk/newtfsedit.c:474 msgid "Type:" msgstr "Type:" #: ../libfdisk/newtfsedit.c:488 msgid "Unknown" msgstr "Ukendt" #: ../libfdisk/newtfsedit.c:1447 msgid "Current Disk Partitions" msgstr "Nuværende drevpartitioner" #: ../libfdisk/newtfsedit.c:1453 msgid " Mount Point Device Requested Actual Type" msgstr "" #: ../libfdisk/newtfsedit.c:1477 msgid "" " F1-Help F2-Add F3-Edit F4-Delete F5-Reset F12-Ok " msgstr " F1-Hjælp F2-Tilføj F3-Redigér F4-Fjern F5-Nulstil F12-Ok " #: ../libfdisk/newtfsedit.c:1480 msgid "Drive Summaries" msgstr "Drevresumér" #: ../libfdisk/newtfsedit.c:1482 msgid " Drive Geom [C/H/S] Total Used Free" msgstr " Drev Geom [C/H/S] Total Brugt Fri" #: ../libfdisk/newtfsedit.c:1596 msgid "No Root Partition" msgstr "Ingen rodpartition" #: ../libfdisk/newtfsedit.c:1597 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) for " "the install to proceed." msgstr "" "Du skal tildele en rodpartition (/) til en ægte Linux-partition (ext2) før " "installationen kan gå videre." #: ../libfdisk/newtfsedit.c:1616 msgid "No Swap Partition" msgstr "Ingen swappartition" #: ../libfdisk/newtfsedit.c:1618 msgid "You must assign a swap partition for the install to proceed." msgstr "Du skal tildele en swappartition før installationen kan gå videre." #: ../libfdisk/newtfsedit.c:1644 msgid "No /boot/efi Partition" msgstr "Ingen /boot/efi partition" #: ../libfdisk/newtfsedit.c:1646 msgid "" "You must assign the mount point /boot/efi to a FAT-style primary partition " "for the install to proceed." msgstr "" "Du skal tildele et monteringspunkt /boot/efi til en primær FAT-partition før " "installationen kan gå videre." #: ../libfdisk/newtfsedit.c:1667 msgid "" "There are unallocated partitions left. If you quit now they will not be " "written to the disk.\n" "\n" "Are you sure you want to exit?" msgstr "" "Der er stadig utildelte partitioner tilbage. Hvis du afslutter nu, vil de " "ikke blive skrevet på disken.\n" "\n" "Er du sikker på at du vil afslutte?" #: ../libfdisk/newtfsedit.c:1683 msgid "Save Changes" msgstr "Gem ændringer" #: ../libfdisk/newtfsedit.c:1685 msgid "Save changes to partition table(s)?" msgstr "Gem ændringer til partitionstabel(ler)?" #: ../libfdisk/newtfsedit.c:1730 msgid "You may only delete NFS mounts." msgstr "Du må kun slette NFS-monteringer." #: ../loader/cdrom.c:26 msgid "Other CDROM" msgstr "Anden cdrom" #: ../loader/cdrom.c:32 msgid "CDROM type" msgstr "Cdrom-type" #: ../loader/cdrom.c:32 msgid "What type of CDROM do you have?" msgstr "Hvilken type cdrom har du?" #: ../loader/cdrom.c:89 msgid "Initializing CDROM..." msgstr "Opstarter cdrom..." #: ../loader/devices.c:77 msgid "Miscellaneous" msgstr "Diverse" #: ../loader/devices.c:86 msgid "" "This module can take parameters which affects its operation. If you don't " "know what parameters to supply, just skip this screen by pressing the \"OK\" " "button now." msgstr "" "Dette modul kan tilføres parametre som påvirker dets operation. Hvis du ikke " "ved hvilke parametre, der skal bruges, så spring denne side over ved at " "trykke på \"Ok\" knappen nu." #: ../loader/devices.c:91 msgid "Module Parameters" msgstr "Modulparametre" #: ../loader/devices.c:207 ../loader/devices.c:214 ../loader/devices.c:333 #: ../loader/loader.c:281 ../loader/loader.c:342 ../loader/loader.c:358 msgid "Devices" msgstr "Enheder" #: ../loader/devices.c:209 msgid "Do you have a driver disk?" msgstr "Har du en driverdiskette?" #: ../loader/devices.c:216 msgid "Insert your driver disk and press \"OK\" to continue." msgstr "Indsæt din driverdiskette og tryk \"Ok\" for at fortsætte." #: ../loader/devices.c:237 msgid "Failed to mount driver disk." msgstr "Kunne ikke montere driverdiskette." #: ../loader/devices.c:244 msgid "" "The floppy disk you inserted is not a valid driver disk for this release of " "Red Hat Linux." msgstr "" "Disketten du indsatte er ikke en gyldig driverdiskette til denne udgave af " "Red Hat Linux." #: ../loader/devices.c:304 msgid "" "Which driver should I try?. If the driver you need does not appear in this " "list, and you have a separate driver disk, please press F2." msgstr "" "Hvilken driver skal jeg prøve? Hvis driveren du mangler ikke findes på denne " "liste og du har en separat driverdiskette, tryk venligst på F2." #: ../loader/devices.c:313 msgid "Specify module parameters" msgstr "Angiv modulparametre" #: ../loader/devices.c:410 #, c-format msgid "Failed to insert %s module." msgstr "Kunne ikke indsætte %s modul." #: ../loader/devices.c:456 #, c-format msgid "Failed to mount driver disk: %s." msgstr "Kunne ikke montere driverdisketten: %s." #: ../loader/devices.c:476 msgid "The wrong diskette was inserted." msgstr "Den forkerte diskette blev indsat" #: ../loader/devices.c:488 ../loader/loader.c:445 ../loader/loader.c:447 msgid "Loading" msgstr "Indlæser" #: ../loader/devices.c:488 ../loader/windows.c:47 #, fuzzy, c-format msgid "Loading %s driver..." msgstr "Indlæser %s ramdisk..." #: ../loader/devices.c:507 msgid "Driver Disk" msgstr "Driverdiskette" #: ../loader/devices.c:508 #, c-format msgid "Please insert the %s driver disk now." msgstr "Venligst indsæt %s driverdisketten nu." #: ../loader/kickstart.c:58 ../loader/kickstart.c:68 ../loader/kickstart.c:107 msgid "Kickstart Error" msgstr "Kickstartsfejl" #: ../loader/kickstart.c:59 #, c-format msgid "Error opening: kickstart file %s: %s" msgstr "Fejl ved åbning: kickstartsfil %s: %s" #: ../loader/kickstart.c:69 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "Fejl ved læsning af indhold af kickstartsfil %s: %s" #: ../loader/kickstart.c:108 #, c-format msgid "Error on line %d of kickstart file %s." msgstr "Fejl på linje %d i kickstartsfilen %s." #: ../loader/lang.c:287 msgid "Choose a Language" msgstr "Vælg et sprog" #: ../loader/lang.c:336 ../loader/loader.c:148 msgid "Welcome to Red Hat Linux" msgstr "Velkommen til Red Hat Linux" #: ../loader/lang.c:337 ../loader/loader.c:150 msgid "" " / between elements | selects | next screen " msgstr "" " / imellem elementer | vælg | næste side " #: ../loader/lang.c:575 msgid "Keyboard Type" msgstr "Tastaturtype" #: ../loader/lang.c:576 msgid "What type of keyboard do you have?" msgstr "Hvilken slags tastatur har du?" #: ../loader/loader.c:123 msgid "Local CDROM" msgstr "Lokal cdrom" #: ../loader/loader.c:126 msgid "NFS image" msgstr "NFS-billede" #: ../loader/loader.c:131 msgid "Hard drive" msgstr "Harddisk" #: ../loader/loader.c:268 msgid "SCSI" msgstr "SCSI" #: ../loader/loader.c:282 msgid "What kind of device would you like to add" msgstr "Hvilken slags enhed vil du gerne tilføje" #: ../loader/loader.c:331 msgid "I have found the following devices in your system:" msgstr "Jeg har fundet følgende enheder på dit system:" #: ../loader/loader.c:333 ../loader/loader.c:358 msgid "Add Device" msgstr "Tilføj enhed" #: ../loader/loader.c:359 msgid "" "I don't have any special device drivers loaded for your system. Would you " "like to load some now?" msgstr "" "Jeg har ikke indlæst nogle specialenhedsdrivere for dit system. Vil du gerne " "have nogle indlæst nu?" #: ../loader/loader.c:500 #, c-format msgid "Loading %s ramdisk..." msgstr "Indlæser %s ramdisk..." #: ../loader/loader.c:510 msgid "Error loading ramdisk." msgstr "Fejl ved indlæsning af ramdisk." #: ../loader/loader.c:575 ../loader/loader.c:2174 #, c-format msgid "Failed to read directory %s: %s" msgstr "Kunne ikke læse katalog %s: %s" #: ../loader/loader.c:797 msgid "Hard Drives" msgstr "Harddiske" #: ../loader/loader.c:798 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" "Du ser ikke ud til at have nogen harddiske på dit system! Vil du gerne " "konfigurere yderligere enheder?" #: ../loader/loader.c:812 #, fuzzy msgid "" "What partition and directory on that partition hold the CD (iso9660) images " "for Red Hat Linux? If you don't see the disk drive you're using listed here, " "press F2 to configure additional devices." msgstr "" "Hvilken partition, og hvilket katalog på denne partition, indeholder " "RedHat/RPMS og RedHat/base katalogerne? Hvis du ikke kan se det diskdrev du " "bruger her, tryk på F2 for at konfigurere yderligere enheder." #: ../loader/loader.c:826 #, fuzzy msgid "Directory holding images:" msgstr "Katalog indeholdende Red Hat:" #: ../loader/loader.c:846 msgid "Select Partition" msgstr "Vælg partition" #: ../loader/loader.c:894 #, fuzzy, c-format msgid "Device %s does not appear to contain Red Hat CDROM images." msgstr "Enheden %s ser ikke ud til at indholde et Red Hat-installationstræ." #: ../loader/loader.c:949 msgid "" "I could not find a Red Hat Linux CDROM in any of your CDROM drives. Please " "insert the Red Hat CD and press \"OK\" to retry." msgstr "" "Jeg kunne ikke finde en Red Hat Linux-cdrom i nogen af dine cdrom-drev. " "Indsæt venligst Red Hat-cd'en og tryk på \"Ok\" for at prøve igen." #: ../loader/loader.c:1036 msgid "Networking Device" msgstr "Netværksenhed" #: ../loader/loader.c:1037 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "" "Du har flere netværksenheder på dette system. Hvilken vil du gerne bruge til " "at installere fra?" #: ../loader/loader.c:1119 msgid "That directory does not seem to contain a Red Hat installation tree." msgstr "Det katalog ser ikke ud til at indholde et Red Hat installationstræ." #: ../loader/loader.c:1124 msgid "I could not mount that directory from the server" msgstr "Jeg kunne ikke montere dette katalog fra tjeneren" #: ../loader/loader.c:1220 ../loader/loader.c:1229 msgid "HTTP" msgstr "Http" #: ../loader/loader.c:1221 msgid "Unable to retrieve the first install image" msgstr "Kunne ikke hente det første trins ramdisk" #: ../loader/loader.c:1230 msgid "Unable to retrieve the second install image" msgstr "Kunne ikke hente det andet trins ramdisk" #: ../loader/loader.c:1260 msgid "FTP and HTTP installs require 20MB or more of system memory." msgstr "" #: ../loader/loader.c:1484 msgid "Rescue Method" msgstr "Redningsmetode" #: ../loader/loader.c:1485 msgid "Installation Method" msgstr "Installationsmetode" #: ../loader/loader.c:1487 msgid "What type of media contains the rescue image?" msgstr "Hvilken type medium befinder rednings-billedet sig på?" #: ../loader/loader.c:1489 msgid "What type of media contains the packages to be installed?" msgstr "Hvilken type medium befinder pakkerne, som skal installeres, sig på?" #: ../loader/loader.c:2128 msgid "Cannot find ks.cfg on boot floppy." msgstr "Kan ikke finde ks.cfg på opstartsdiskette." #: ../loader/loader.c:2236 msgid "Updates Disk" msgstr "Opdaterings-diskette" #: ../loader/loader.c:2237 msgid "Insert your updates disk and press \"OK\" to continue." msgstr "Indsæt din opdateringsdiskette og tast \"Ok\" for at fortsætte." #: ../loader/loader.c:2242 #, fuzzy msgid "" "The floppy disk you inserted is not a valid update disk for this release of " "Red Hat Linux." msgstr "" "Disketten du indsatte er ikke en gyldig driverdiskette til denne udgave af " "Red Hat Linux." #: ../loader/loader.c:2250 msgid "Failed to mount floppy disk." msgstr "Kunne ikke montere diskette." #. Copy everything to /tmp/updates so .so files don't get run #. from /dev/floppy. We could (and probably should) get smarter #. about this at some point. #: ../loader/loader.c:2255 msgid "Updates" msgstr "Opdateringer" #: ../loader/loader.c:2255 msgid "Reading anaconda updates..." msgstr "Læser anaconda-opdateringer..." #: ../loader/loader.c:2457 #, fuzzy msgid "IDE" msgstr "KDE" #: ../loader/loader.c:2457 #, fuzzy msgid "Initializing IDE modules..." msgstr "Opstarter cdrom..." #: ../loader/net.c:149 msgid "NFS server name:" msgstr "NFS-tjenernavn:" #: ../loader/net.c:152 ../loader/urls.c:191 msgid "Red Hat directory:" msgstr "Red Hat-katalog:" #: ../loader/net.c:158 msgid "NFS Setup" msgstr "NFS-opsætning" #: ../loader/net.c:159 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your NFS server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecture" msgstr "" "Indtast venligst følgende information:\n" "\n" " o navn eller IP nummer på din NFS-tjener\n" " o navnet på kataloget til den tjener der indeholder\n" " Red Hat Linux for din arkitektur (i386/alpha/..)" #: ../loader/net.c:241 msgid "Nameserver IP" msgstr "Navnetjener-IP" #: ../loader/net.c:245 ../loader/net.c:727 msgid "Nameserver" msgstr "Navnetjener" #: ../loader/net.c:246 msgid "" "Your dynamic IP request returned IP configuration information, but it did " "not include a DNS nameserver. If you know what your nameserver is, please " "enter it now. If you don't have this information, you can leave this field " "blank and the install will continue." msgstr "" "Din dynamiske IP anmodning returnerede IP konfigurations-information. men " "dette indeholdt ikke en DNS navnetjener. Hvis du véd hvor din navneserver " "er, så skriv det nu. Hvis du ikke har denne information kan du lade dette " "felt være blankt, og installationen vil fortsætte." #: ../loader/net.c:256 msgid "Invalid IP Information" msgstr "Ugyldig IP-information" #: ../loader/net.c:257 msgid "You entered an invalid IP address." msgstr "Du skal indtaste både en gyldig IP-adresse og en netmaske." #: ../loader/net.c:280 msgid "" "Please enter the IP configuration for this machine. Each item should be " "entered as an IP address in dotted-decimal notation (for example, 1.2.3.4)." msgstr "" "Indtast venligst IP-konfiguration for denne maskine. Hver linie bør " "indtastes som en IP-adresse i punktdecimalformat (for eksempel: 1.2.3.4)." #: ../loader/net.c:322 msgid "Use dynamic IP configuration (BOOTP/DHCP)" msgstr "Brug dynamisk IP-konfiguration (BOOTP/DHCP)" #: ../loader/net.c:350 msgid "Configure TCP/IP" msgstr "Konfigurér TCP/IP" #: ../loader/net.c:381 msgid "Missing Information" msgstr "Manglende information" #: ../loader/net.c:382 msgid "You must enter both a valid IP address and a netmask." msgstr "Du skal indtaste både en gyldig IP-adresse og en netmaske." #: ../loader/net.c:390 ../loader/net.c:661 msgid "Dynamic IP" msgstr "Dynamisk IP" #: ../loader/net.c:391 ../loader/net.c:662 msgid "Sending request for IP information..." msgstr "Sender forespørgsel efter IP-information..." #: ../loader/net.c:534 msgid "Determining host name and domain..." msgstr "Afgør værtsnavn og domæne..." #: ../loader/net.c:645 ../loader/net.c:678 msgid "kickstart" msgstr "kickstart" #: ../loader/net.c:646 #, c-format msgid "bad argument to kickstart network command %s: %s" msgstr "ugyldigt argument til 'kickstart' netværkskommando %s: %s" #: ../loader/net.c:679 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "Ugyldig bootproto %s angivet i netværkskommando" #: ../loader/net.c:721 msgid "Boot protocol to use" msgstr "Opstartsprotokol at bruge" #: ../loader/net.c:723 msgid "Network gateway" msgstr "Netværksgateway" #: ../loader/net.c:725 msgid "IP address" msgstr "IP-adresse" #: ../loader/net.c:734 msgid "Domain name" msgstr "Domænenavn" #: ../loader/net.c:737 msgid "Network device" msgstr "Netværksenhed" #: ../loader/net.c:809 msgid "" " / between elements | selects | next " "screen" msgstr "" " / mellem elementer | Vælger | næste side" #: ../loader/net.c:810 #, c-format msgid "netconfig %s (C) 1999 Red Hat, Inc." msgstr "netconfig %s (C) 1999 Red Hat, Inc." #: ../loader/net.c:812 msgid "Network configuration" msgstr "Netværkskonfiguration" #: ../loader/net.c:813 msgid "Would you like to set up networking?" msgstr "Ønsker du at opsætte netværk?" #: ../loader/pcmcia.c:34 msgid "PC Card" msgstr "'PC Card'" #: ../loader/pcmcia.c:35 msgid "Initializing PC Card Devices..." msgstr "Opstarter 'PC Card'-enheder..." #: ../loader/pcmcia.c:104 msgid "PCMCIA" msgstr "" #: ../loader/pcmcia.c:105 #, fuzzy msgid "Please insert your PCMCIA driver disk into your floppy drive now." msgstr "Venligst indsæt %s driverdisketten nu." #: ../loader/pcmcia.c:114 #, fuzzy msgid "Failed to mount disk." msgstr "Kunne ikke montere driverdiskette." #: ../loader/pcmcia.c:132 msgid "That floppy does not look like a Red Hat PCMCIA driver disk." msgstr "" #: ../loader/urls.c:79 #, c-format msgid "Failed to log into %s: %s" msgstr "Kunne ikke logge ind på %s: %s" #: ../loader/urls.c:88 ../loader/urls.c:95 #, c-format msgid "Failed to retrieve %s: %s" msgstr "Kunne ikke hente %s: %s:" #: ../loader/urls.c:100 msgid "Retrieving" msgstr "Modtager" #: ../loader/urls.c:160 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your FTP server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" "Indtast venligst følgende information:\n" "\n" " o navnet eller IP-nummeret på din ftp-tjener\n" " o kataloget på tjeneren som indeholder\n" " Red Hat Linux for din arkitektur\n" #: ../loader/urls.c:169 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your web server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" "Indtast venligst følgende information:\n" "\n" " o navnet eller IP-nummeret på din webtjener\n" " o kataloget på tjeneren som indeholder\n" " Red Hat Linux'en for din arkitektur\n" #: ../loader/urls.c:187 msgid "FTP site name:" msgstr "Ftp-stedsnavn:" #: ../loader/urls.c:188 msgid "Web site name:" msgstr "Webstedsnavn:" #: ../loader/urls.c:206 #, fuzzy msgid "Use non-anonymous ftp" msgstr "Benyt ikke-anonym ftp eller proxytjener" #: ../loader/urls.c:211 msgid "Use proxy server" msgstr "Benyt proxytjener" #: ../loader/urls.c:223 msgid "FTP Setup" msgstr "Ftp-opsætning" #: ../loader/urls.c:224 msgid "HTTP Setup" msgstr "Http-opsætning" #: ../loader/urls.c:234 msgid "You must enter a server name." msgstr "Du skal indtaste et tjenernavn." #: ../loader/urls.c:239 msgid "You must enter a directory." msgstr "Du skal indtaste et katalog." #: ../loader/urls.c:244 msgid "Unknown Host" msgstr "Ukendt vært" #: ../loader/urls.c:245 #, c-format msgid "%s is not a valid hostname." msgstr "%s er ikke et gyldigt værtsnavn." #: ../loader/urls.c:316 #, fuzzy msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below." msgstr "" "Hvis du bruger ikke-anonym ftp, så indtast det kontonavn og den adgangskode " "du vil bruge herunder. Hvis du bruger en Ftp-proxy så indtast navnet på den " "proxytjener du vil benytte." #: ../loader/urls.c:321 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" "Hvis du bruger en Http-proxytjener så indtast navnet på den proxytjener du " "vil benytte." #: ../loader/urls.c:342 msgid "Account name:" msgstr "Kontonavn:" #: ../loader/urls.c:351 msgid "FTP Proxy:" msgstr "Ftp-proxy:" #: ../loader/urls.c:352 msgid "HTTP Proxy:" msgstr "Http-proxy:" #: ../loader/urls.c:356 msgid "FTP Proxy Port:" msgstr "Ftp-proxyport:" #: ../loader/urls.c:357 msgid "HTTP Proxy Port:" msgstr "Http-proxyport:" #: ../loader/windows.c:46 msgid "Loading SCSI driver" msgstr "Indlæser SCSI-driver" #: ../gnome-map/gglobe-canvas.c:24 msgid "Map Image to display" msgstr "Kortbillede som skal vises" #: ../gnome-map/gglobe-canvas.c:25 msgid "Width of map (in pixels)" msgstr "Kortbredte (i pixler)" #: ../gnome-map/gglobe-canvas.c:26 msgid "Enable antialias" msgstr "Aktivér antialias" #: ../gnome-map/gglobe-canvas.c:100 msgid "World" msgstr "Verdenen" #: ../gnome-map/gglobe-canvas.c:101 msgid "North America" msgstr "Nordamerika" #: ../gnome-map/gglobe-canvas.c:102 msgid "South America" msgstr "Sydamerika" #: ../gnome-map/gglobe-canvas.c:103 msgid "Indian Rim" msgstr "" #: ../gnome-map/gglobe-canvas.c:104 msgid "Europe" msgstr "Europa" #: ../gnome-map/gglobe-canvas.c:105 msgid "Africa" msgstr "Afrika" #: ../gnome-map/gglobe-canvas.c:106 msgid "Asia" msgstr "Asien" #: ../gnome-map/gglobe-canvas.c:713 ../gnome-map/timezonemapmodule.c:698 msgid "Cannot load timezone data" msgstr "Kan ikke indlæse data om tidszone" #: ../gnome-map/gglobe-canvas.c:719 ../gnome-map/timezonemapmodule.c:731 msgid "gglobe-canvas" msgstr "gglobe-canvas" #: ../gnome-map/gglobe-canvas.c:764 msgid "View: " msgstr "Vis: " msgid "Base" msgstr "Basal" msgid "Printer Support" msgstr "Printer-understøttelse" msgid "X Window System" msgstr "X-vinduessystem" msgid "Mail/WWW/News Tools" msgstr "Post/web/nyhedsgrupper" msgid "DOS/Windows Connectivity" msgstr "DOS/Windows-forbindelse" msgid "Graphics Manipulation" msgstr "Billedbehandling" msgid "Games" msgstr "Underholdning" msgid "Multimedia Support" msgstr "Understøttelse for multimedia" msgid "Laptop Support" msgstr "Understøttelse for bærbare" msgid "Networked Workstation" msgstr "Netorienteret arbejdsstation" msgid "Dialup Workstation" msgstr "Ringop-arbejdsstation" msgid "News Server" msgstr "Nyhedstjener" msgid "NFS Server" msgstr "NFS-tjener" msgid "SMB (Samba) Server" msgstr "Samba SMB-tjener" msgid "IPX/Netware(tm) Connectivity" msgstr "IPX/Netware(tm)-forbindelse" msgid "Anonymous FTP Server" msgstr "Anonym ftp-tjener" #, fuzzy msgid "SQL Server" msgstr "NFS-tjener" msgid "Web Server" msgstr "Webtjener" msgid "DNS Name Server" msgstr "DNS-navnetjener" msgid "Network Management Workstation" msgstr "Arbejdsstation til netværksbetjening" msgid "Authoring/Publishing" msgstr "Publisering" msgid "Emacs" msgstr "Emacs" msgid "Development" msgstr "Udvikling" msgid "Kernel Development" msgstr "Kerneudvikling" msgid "Utilities" msgstr "Tilbehør" #, fuzzy #~ msgid "None" #~ msgstr "Færdig" #~ msgid "