# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2001-01-19 10:09-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: ENCODING\n" #: ../comps.py:460 msgid "Everything" msgstr "" #: ../exception.py:13 ../text.py:938 msgid "Exception Occurred" msgstr "" #: ../exception.py:91 msgid "Dump Written" msgstr "" #: ../exception.py:92 msgid "" "Your system's state has been successfully written to the floppy. Your system " "will now be reset." msgstr "" #: ../fstab.py:65 msgid "" "The following partitions are newly created, but you have chosen not to " "format them. This will probably cause an error later in the install.\n" "\n" msgstr "" #: ../fstab.py:73 msgid "" "\n" "\n" "Press OK to continue, or Cancel to go back and select these partitions to be " "formatted (RECOMMENDED)." msgstr "" #: ../fstab.py:74 msgid "Warning" msgstr "" #: ../fstab.py:300 ../fstab.py:494 ../fstab.py:594 ../fstab.py:798 #: ../harddrive.py:168 ../image.py:61 ../image.py:138 #: ../libfdisk/newtfsedit.c:1740 ../loader/devices.c:236 #: ../loader/devices.c:243 ../loader/devices.c:410 ../loader/devices.c:455 #: ../loader/devices.c:475 ../loader/lang.c:99 ../loader/loader.c:515 #: ../loader/loader.c:525 ../loader/loader.c:579 ../loader/loader.c:906 #: ../loader/loader.c:961 ../loader/loader.c:1131 ../loader/loader.c:1136 #: ../loader/loader.c:1273 ../loader/loader.c:2140 ../loader/loader.c:2186 #: ../loader/loader.c:2262 ../loader/pcmcia.c:114 ../loader/pcmcia.c:131 #: ../loader/urls.c:78 ../loader/urls.c:87 ../loader/urls.c:94 #: ../loader/urls.c:233 ../loader/urls.c:238 ../text.py:370 #: ../textw/bootdisk_text.py:69 ../todo.py:1013 ../todo.py:1026 #: ../todo.py:1398 ../upgrade.py:21 ../upgrade.py:49 msgid "Error" msgstr "" #: ../fstab.py:301 msgid "" "The kernel is unable to read your new partitioning information, probably " "because you modified extended partitions. While this is not critical, you " "must reboot your machine before proceeding. Insert the Red Hat boot disk now " "and press \"Ok\" to reboot your system.\n" msgstr "" #: ../fstab.py:483 ../fstab.py:747 ../fstab.py:1184 msgid "Formatting" msgstr "" #: ../fstab.py:484 #, c-format msgid "Formatting swap space on /dev/%s..." msgstr "" #: ../fstab.py:494 msgid "Error creating swap on device " msgstr "" #: ../fstab.py:595 #, c-format msgid "Error unmounting %s: %s" msgstr "" #: ../fstab.py:641 ../todo.py:590 msgid "Creating" msgstr "" #: ../fstab.py:641 msgid "Creating RAID devices..." msgstr "" #: ../fstab.py:682 msgid "Loopback" msgstr "" #: ../fstab.py:683 #, c-format msgid "Creating loopback filesystem on device /dev/%s..." msgstr "" #: ../fstab.py:748 ../fstab.py:1185 #, c-format msgid "Formatting %s filesystem..." msgstr "" #: ../fstab.py:799 #, c-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "This most likely means this partition has not been formatted.\n" "\n" "Press OK to reboot your system." msgstr "" #: ../gui.py:171 msgid "" "An exceptional condition has occured. This is most likely a bug. Please " "copy the full text of this exception and file a bug report at " "http://bugzilla.redhat.com/bugzilla" msgstr "" #: ../gui.py:307 ../text.py:956 msgid "" "Please insert a floppy now. All contents of the disk will be erased, so " "please choose your diskette carefully." msgstr "" #: ../gui.py:413 ../gui.py:781 msgid "Next" msgstr "" #: ../gui.py:414 ../gui.py:780 ../libfdisk/newtfsedit.c:1474 #: ../libfdisk/newtfsedit.c:1482 ../loader/cdrom.c:34 ../loader/devices.c:93 #: ../loader/devices.c:215 ../loader/devices.c:312 ../loader/lang.c:582 #: ../loader/loader.c:288 ../loader/loader.c:810 ../loader/loader.c:847 #: ../loader/loader.c:961 ../loader/loader.c:1053 ../loader/loader.c:1505 #: ../loader/net.c:164 ../loader/net.c:251 ../loader/net.c:336 #: ../loader/urls.c:155 ../loader/urls.c:375 ../rescue.py:87 ../text.py:64 #: ../text.py:75 ../text.py:151 ../text.py:203 ../text.py:210 ../text.py:240 #: ../text.py:243 ../text.py:318 ../text.py:373 ../text.py:391 ../text.py:394 #: ../text.py:413 ../text.py:416 ../text.py:438 ../text.py:441 ../text.py:498 #: ../text.py:501 ../text.py:526 ../text.py:530 ../text.py:539 ../text.py:608 #: ../text.py:610 ../text.py:620 ../text.py:622 ../textw/bootdisk_text.py:30 #: ../textw/firewall_text.py:9 ../textw/lilo_text.py:34 #: ../textw/lilo_text.py:93 ../textw/lilo_text.py:101 #: ../textw/lilo_text.py:209 ../textw/mouse_text.py:27 #: ../textw/mouse_text.py:28 ../textw/mouse_text.py:55 #: ../textw/mouse_text.py:81 ../textw/network_text.py:102 #: ../textw/network_text.py:161 ../textw/network_text.py:164 #: ../textw/packages_text.py:55 ../textw/packages_text.py:236 #: ../textw/packages_text.py:347 ../textw/packages_text.py:353 #: ../textw/partitioning_text.py:23 ../textw/partitioning_text.py:64 #: ../textw/partitioning_text.py:154 ../textw/partitioning_text.py:218 #: ../textw/partitioning_text.py:257 ../textw/partitioning_text.py:318 #: ../textw/silo_text.py:26 ../textw/silo_text.py:99 ../textw/silo_text.py:206 #: ../textw/timezone_text.py:69 ../textw/userauth_text.py:30 #: ../textw/userauth_text.py:165 ../textw/userauth_text.py:199 #: ../textw/userauth_text.py:297 msgid "Back" msgstr "" #: ../gui.py:415 ../gui.py:786 msgid "Show Help" msgstr "" #: ../gui.py:416 ../gui.py:785 msgid "Hide Help" msgstr "" #: ../gui.py:417 ../gui.py:784 msgid "Finish" msgstr "" #: ../gui.py:420 ../gui.py:816 msgid "Online Help" msgstr "" #: ../gui.py:421 ../iw/language_gui.py:10 ../iw/language_support_gui.py:25 #: ../text.py:69 ../text.py:1028 ../text.py:1061 msgid "Language Selection" msgstr "" #: ../gui.py:522 ../libfdisk/gnomefsedit.c:1292 ../libfdisk/gnomefsedit.c:1309 msgid "Close" msgstr "" #: ../gui.py:527 ../gui.py:783 msgid "Release Notes" msgstr "" #: ../gui.py:558 msgid "Unable to load file!" msgstr "" #: ../gui.py:688 msgid "Red Hat Linux Installer" msgstr "" #: ../gui.py:692 msgid "Red Hat Linux Install Shell" msgstr "" #: ../gui.py:703 #, c-format msgid "Red Hat Linux Installer on %s" msgstr "" #: ../gui.py:704 #, c-format msgid "Red Hat Linux Install Shell on %s" msgstr "" #: ../gui.py:865 msgid "Install Window" msgstr "" #: ../harddrive.py:169 #, c-format msgid "Missing CD #%d, which is required for the install." msgstr "" #: ../image.py:58 msgid "Copying File" msgstr "" #: ../image.py:59 msgid "Transferring install image to hard drive..." msgstr "" #: ../image.py:62 msgid "" "An error occured transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" #: ../image.py:115 msgid "Change CDROM" msgstr "" #: ../image.py:116 #, c-format msgid "Please insert disc %d to continue." msgstr "" #: ../image.py:133 msgid "Wrong CDROM" msgstr "" #: ../image.py:134 msgid "That's not the correct Red Hat CDROM." msgstr "" #: ../image.py:139 msgid "The CDROM could not be mounted." msgstr "" #: ../rescue.py:26 msgid "WARNING: no valid block devices were found.\n" msgstr "" #: ../rescue.py:28 msgid "ERROR: unknown error encountered reading partition tables.\n" msgstr "" #: ../rescue.py:54 msgid "System to Rescue" msgstr "" #: ../rescue.py:55 ../text.py:389 msgid "What partition holds the root partition of your installation?" msgstr "" #: ../loader/cdrom.c:34 ../loader/devices.c:92 ../loader/devices.c:214 #: ../loader/devices.c:236 ../loader/devices.c:243 ../loader/devices.c:312 #: ../loader/devices.c:410 ../loader/devices.c:455 ../loader/devices.c:475 #: ../loader/devices.c:507 ../loader/kickstart.c:58 ../loader/kickstart.c:68 #: ../loader/kickstart.c:107 ../loader/lang.c:99 ../loader/lang.c:293 #: ../loader/lang.c:582 ../loader/loader.c:288 ../loader/loader.c:515 #: ../loader/loader.c:525 ../loader/loader.c:579 ../loader/loader.c:847 #: ../loader/loader.c:906 ../loader/loader.c:961 ../loader/loader.c:1053 #: ../loader/loader.c:1131 ../loader/loader.c:1136 ../loader/loader.c:1233 #: ../loader/loader.c:1242 ../loader/loader.c:1273 ../loader/loader.c:1505 #: ../loader/loader.c:2140 ../loader/loader.c:2186 ../loader/loader.c:2249 #: ../loader/loader.c:2262 ../loader/net.c:164 ../loader/net.c:251 #: ../loader/net.c:336 ../loader/net.c:645 ../loader/net.c:678 #: ../loader/pcmcia.c:104 ../loader/pcmcia.c:114 ../loader/pcmcia.c:131 #: ../loader/urls.c:155 ../loader/urls.c:233 ../loader/urls.c:238 #: ../loader/urls.c:375 ../rescue.py:57 ../rescue.py:74 ../rescue.py:81 #: ../text.py:151 ../text.py:240 ../text.py:318 ../text.py:391 ../text.py:438 #: ../text.py:456 ../text.py:498 ../text.py:526 ../text.py:608 ../text.py:620 #: ../text.py:649 ../text.py:670 ../text.py:840 ../text.py:898 ../text.py:924 #: ../text.py:950 ../text.py:958 ../text.py:973 ../text.py:1213 #: ../textw/bootdisk_text.py:52 ../textw/bootdisk_text.py:54 #: ../textw/firewall_text.py:9 ../textw/firewall_text.py:122 #: ../textw/firewall_text.py:124 ../textw/lilo_text.py:33 #: ../textw/lilo_text.py:93 ../textw/lilo_text.py:152 #: ../textw/lilo_text.py:158 ../textw/mouse_text.py:55 #: ../textw/network_text.py:102 ../textw/network_text.py:123 #: ../textw/network_text.py:161 ../textw/packages_text.py:55 #: ../textw/packages_text.py:89 ../textw/packages_text.py:236 #: ../textw/packages_text.py:347 ../textw/partitioning_text.py:257 #: ../textw/partitioning_text.py:318 ../textw/partitioning_text.py:329 #: ../textw/partitioning_text.py:337 ../textw/partitioning_text.py:344 #: ../textw/silo_text.py:25 ../textw/silo_text.py:99 #: ../textw/timezone_text.py:69 ../textw/userauth_text.py:30 #: ../textw/userauth_text.py:44 ../textw/userauth_text.py:49 #: ../textw/userauth_text.py:84 ../textw/userauth_text.py:99 #: ../textw/userauth_text.py:105 ../textw/userauth_text.py:111 #: ../textw/userauth_text.py:119 ../textw/userauth_text.py:128 #: ../textw/userauth_text.py:135 ../textw/userauth_text.py:199 #: ../textw/userauth_text.py:297 ../xserver.py:33 msgid "OK" msgstr "" #: ../iw/congrats_gui.py:13 ../iw/congrats_gui.py:62 ../rescue.py:57 #: ../rescue.py:61 msgid "Exit" msgstr "" #: ../rescue.py:70 ../rescue.py:76 msgid "Rescue" msgstr "" #: ../rescue.py:71 msgid "" "Your system has been mounted under /mnt/sysimage.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" #: ../rescue.py:77 msgid "" "An error occured trying to mount some or all of your system. Some of it may " "be mounted under /mnt/sysimage.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" #: ../rescue.py:83 msgid "Rescue Mode" msgstr "" #: ../rescue.py:84 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" #: ../rescue.py:95 msgid "Your system is mounted under the /mnt/sysimage directory." msgstr "" #. code to create dialog in gtk+ #: ../iw/package_gui.py:470 ../libfdisk/fsedit.c:917 ../libfdisk/fsedit.c:924 #: ../libfdisk/fsedit.c:931 ../libfdisk/fsedit.c:940 ../libfdisk/fsedit.c:967 #: ../libfdisk/fsedit.c:980 ../libfdisk/fsedit.c:990 ../libfdisk/fsedit.c:1019 #: ../libfdisk/fsedit.c:1029 ../libfdisk/fsedit.c:1046 #: ../libfdisk/fsedit.c:1454 ../libfdisk/gnomefsedit.c:783 #: ../libfdisk/gnomefsedit.c:818 ../libfdisk/gnomefsedit.c:1166 #: ../libfdisk/gnomefsedit.c:1203 ../libfdisk/gnomefsedit.c:1237 #: ../libfdisk/gnomefsedit.c:1256 ../libfdisk/gnomefsedit.c:1430 #: ../libfdisk/gnomefsedit.c:1505 ../libfdisk/gnomefsedit.c:1555 #: ../libfdisk/gnomefsedit.c:1620 ../libfdisk/gnomefsedit.c:1638 #: ../libfdisk/gnomefsedit.c:1916 ../libfdisk/gnomefsedit.c:1925 #: ../libfdisk/gnomefsedit.c:2171 ../libfdisk/gnomefsedit.c:2179 #: ../libfdisk/gnomefsedit.c:2223 ../libfdisk/gnomefsedit.c:2233 #: ../libfdisk/gnomefsedit.c:2240 ../libfdisk/gnomefsedit.c:2255 #: ../libfdisk/gnomefsedit.c:2265 ../libfdisk/gnomefsedit.c:2275 #: ../libfdisk/gnomefsedit.c:2314 ../libfdisk/gnomefsedit.c:2445 #: ../libfdisk/gnomefsedit.c:2487 ../libfdisk/newtfsedit.c:170 #: ../libfdisk/newtfsedit.c:346 ../libfdisk/newtfsedit.c:574 #: ../libfdisk/newtfsedit.c:636 ../libfdisk/newtfsedit.c:669 #: ../libfdisk/newtfsedit.c:695 ../libfdisk/newtfsedit.c:714 #: ../libfdisk/newtfsedit.c:845 ../libfdisk/newtfsedit.c:1474 #: ../libfdisk/newtfsedit.c:1482 ../libfdisk/newtfsedit.c:1607 #: ../libfdisk/newtfsedit.c:1628 ../libfdisk/newtfsedit.c:1656 #: ../libfdisk/newtfsedit.c:1740 ../loader/urls.c:78 ../loader/urls.c:87 #: ../loader/urls.c:94 ../loader/urls.c:244 ../text.py:64 ../text.py:66 #: ../text.py:203 ../text.py:539 ../textw/lilo_text.py:123 #: ../textw/lilo_text.py:208 ../textw/mouse_text.py:27 #: ../textw/partitioning_text.py:154 ../textw/partitioning_text.py:395 #: ../textw/silo_text.py:136 ../textw/silo_text.py:149 #: ../textw/silo_text.py:205 msgid "Ok" msgstr "" #: ../text.py:70 msgid "What language would you like to use during the installation process?" msgstr "" #: ../text.py:153 msgid "Choose the languages to be installed:" msgstr "" #: ../text.py:158 ../text.py:1124 msgid "Language Support" msgstr "" #: ../text.py:205 msgid "Default Language" msgstr "" #: ../text.py:206 msgid "Choose the default language: " msgstr "" #: ../text.py:238 ../text.py:1030 ../text.py:1067 msgid "Keyboard Selection" msgstr "" #: ../text.py:239 msgid "Which model keyboard is attached to this computer?" msgstr "" #: ../text.py:294 msgid "Upgrade Existing Installation" msgstr "" #: ../text.py:316 ../text.py:1070 msgid "Installation Type" msgstr "" #: ../text.py:317 msgid "What type of system would you like to install?" msgstr "" #: ../text.py:371 msgid "You don't have any Linux partitions. You can't upgrade this system!" msgstr "" #: ../text.py:388 msgid "System to Upgrade" msgstr "" #: ../text.py:405 msgid "Customize Packages to Upgrade" msgstr "" #: ../text.py:406 msgid "" "The packages you have installed, and any other packages which are needed to " "satisfy their dependencies, have been selected for installation. Would you " "like to customize the set of packages that will be upgraded?" msgstr "" #: ../iw/rootpartition_gui.py:430 ../iw/welcome_gui.py:89 #: ../libfdisk/fsedit.c:948 ../libfdisk/gnomefsedit.c:733 #: ../libfdisk/gnomefsedit.c:1141 ../libfdisk/gnomefsedit.c:1280 #: ../libfdisk/gnomefsedit.c:1302 ../libfdisk/gnomefsedit.c:2368 #: ../libfdisk/gnomefsedit.c:2655 ../libfdisk/gnomefsedit.c:2710 #: ../libfdisk/newtfsedit.c:612 ../libfdisk/newtfsedit.c:739 #: ../libfdisk/newtfsedit.c:871 ../libfdisk/newtfsedit.c:1677 #: ../libfdisk/newtfsedit.c:1695 ../libfdisk/newtfsedit.c:1782 #: ../loader/devices.c:207 ../loader/loader.c:810 ../loader/net.c:812 #: ../text.py:413 ../textw/bootdisk_text.py:12 ../textw/bootdisk_text.py:30 #: ../textw/bootdisk_text.py:38 ../textw/partitioning_text.py:218 #: ../textw/partitioning_text.py:377 msgid "Yes" msgstr "" #: ../iw/rootpartition_gui.py:432 ../iw/welcome_gui.py:92 #: ../libfdisk/fsedit.c:948 ../libfdisk/gnomefsedit.c:733 #: ../libfdisk/gnomefsedit.c:1141 ../libfdisk/gnomefsedit.c:1280 #: ../libfdisk/gnomefsedit.c:1302 ../libfdisk/gnomefsedit.c:2368 #: ../libfdisk/gnomefsedit.c:2655 ../libfdisk/gnomefsedit.c:2710 #: ../libfdisk/newtfsedit.c:612 ../libfdisk/newtfsedit.c:739 #: ../libfdisk/newtfsedit.c:871 ../libfdisk/newtfsedit.c:1677 #: ../libfdisk/newtfsedit.c:1695 ../libfdisk/newtfsedit.c:1782 #: ../loader/devices.c:208 ../loader/net.c:812 ../text.py:413 ../text.py:419 #: ../textw/bootdisk_text.py:12 ../textw/bootdisk_text.py:30 #: ../textw/bootdisk_text.py:41 ../textw/partitioning_text.py:377 msgid "No" msgstr "" #: ../text.py:429 ../text.py:448 msgid "Red Hat Linux" msgstr "" #: ../text.py:430 msgid "" "Welcome to Red Hat Linux!\n" "\n" "This installation process is outlined in detail in the Official Red Hat " "Linux Installation Guide available from Red Hat Software. If you have access " "to this manual, you should read the installation section before continuing.\n" "\n" "If you have purchased Official Red Hat Linux, be sure to register your " "purchase through our web site, http://www.redhat.com/." msgstr "" #: ../text.py:449 msgid "" "Welcome to the Red Hat Linux!\n" "\n" "You have entered reconfiguration mode, which will allow you to configure " "site-specific options of your computer.\n" "\n" "To exit without changing your setup select the Cancel button below." msgstr "" #: ../libfdisk/gnomefsedit.c:818 ../libfdisk/gnomefsedit.c:1925 #: ../libfdisk/gnomefsedit.c:2487 ../libfdisk/newtfsedit.c:575 #: ../libfdisk/newtfsedit.c:1695 ../loader/devices.c:215 #: ../loader/devices.c:507 ../loader/loader.c:2249 ../loader/pcmcia.c:104 #: ../text.py:456 ../text.py:459 ../text.py:840 ../text.py:841 ../text.py:958 #: ../text.py:960 ../textw/lilo_text.py:124 ../textw/silo_text.py:136 #: ../textw/silo_text.py:154 ../textw/userauth_text.py:63 msgid "Cancel" msgstr "" #: ../text.py:496 msgid "X probe results" msgstr "" #: ../text.py:516 ../text.py:535 msgid "Unlisted Card" msgstr "" #: ../text.py:523 msgid "Video Card Selection" msgstr "" #: ../text.py:524 msgid "Which video card do you have?" msgstr "" #: ../text.py:537 msgid "X Server Selection" msgstr "" #: ../text.py:537 msgid "Choose a server" msgstr "" #: ../text.py:604 msgid "Installation to begin" msgstr "" #: ../iw/confirm_gui.py:45 ../text.py:605 msgid "" "A complete log of your installation will be in /tmp/install.log after " "rebooting your system. You may want to keep this file for later reference." msgstr "" #: ../text.py:616 msgid "Upgrade to begin" msgstr "" #: ../iw/confirm_gui.py:41 ../text.py:617 msgid "" "A complete log of your upgrade will be in /tmp/upgrade.log after rebooting " "your system. You may want to keep this file for later reference." msgstr "" #: ../text.py:636 msgid "" " to reboot " " " msgstr "" #: ../text.py:638 ../text.py:661 msgid "Complete" msgstr "" #: ../iw/congrats_gui.py:34 ../text.py:639 msgid "" "Congratulations, installation is complete.\n" "\n" "Press return to reboot, and be sure to remove your boot medium after the " "system reboots, or your system will rerun the install. For information on " "fixes which are available for this release of Red Hat Linux, consult the " "Errata available from http://www.redhat.com/errata.\n" "\n" "Information on configuring and using your Red Hat Linux system is contained " "in the Red Hat Linux manuals." msgstr "" #: ../text.py:657 msgid "" " to exit " " " msgstr "" #: ../text.py:662 msgid "" "Congratulations, configuration is complete.\n" "\n" " For information on fixes which are available for this release of Red Hat " "Linux, consult the Errata available from http://www.redhat.com.\n" "\n" "Information on further configuring your system is available at " "http://www.redhat.com/support/manuals/" msgstr "" #: ../text.py:729 msgid "Package Installation" msgstr "" #: ../text.py:731 msgid "Name : " msgstr "" #: ../text.py:732 msgid "Size : " msgstr "" #: ../text.py:733 msgid "Summary: " msgstr "" #: ../text.py:759 msgid " Packages" msgstr "" #: ../text.py:760 msgid " Bytes" msgstr "" #: ../text.py:761 msgid " Time" msgstr "" #: ../text.py:763 msgid "Total :" msgstr "" #: ../text.py:770 msgid "Completed: " msgstr "" #: ../text.py:780 msgid "Remaining: " msgstr "" #: ../text.py:896 msgid "Help not available" msgstr "" #: ../text.py:897 msgid "No help is available for this install." msgstr "" #: ../text.py:955 msgid "Save Crash Dump" msgstr "" #: ../text.py:966 msgid "" "An internal error occurred in the installation program. Please report this " "error to Red Hat (through the bugzilla.redhat.com web site) as soon as " "possible. The information on this failure may be saved to a floppy disk, and " "will help Red Hat in fixing the problem.\n" "\n" msgstr "" #: ../text.py:973 ../text.py:976 msgid "Save" msgstr "" #: ../text.py:973 ../text.py:974 msgid "Debug" msgstr "" #: ../text.py:984 msgid " " msgstr "" #: ../text.py:988 msgid "Red Hat Linux (C) 2001 Red Hat, Inc." msgstr "" #: ../text.py:991 msgid "" " for help | between elements | selects | next screen" msgstr "" #: ../text.py:993 msgid "" " / between elements | selects | next " "screen" msgstr "" #: ../iw/welcome_gui.py:11 ../iw/welcome_gui.py:39 ../text.py:1026 #: ../text.py:1069 msgid "Welcome" msgstr "" #: ../text.py:1032 ../text.py:1115 msgid "Hostname Setup" msgstr "" #: ../text.py:1034 ../text.py:1112 msgid "Network Setup" msgstr "" #: ../iw/firewall_gui.py:12 ../text.py:1036 ../text.py:1117 #: ../textw/firewall_text.py:11 msgid "Firewall Configuration" msgstr "" #: ../text.py:1044 ../text.py:1129 msgid "Time Zone Setup" msgstr "" #: ../text.py:1046 ../text.py:1131 ../textw/userauth_text.py:9 msgid "Root Password" msgstr "" #: ../text.py:1048 ../text.py:1133 ../textw/userauth_text.py:172 msgid "User Account Setup" msgstr "" #: ../text.py:1050 ../text.py:1135 msgid "Authentication" msgstr "" #: ../text.py:1056 msgid "Configuration Complete" msgstr "" #: ../text.py:1078 ../textw/silo_text.py:28 ../textw/silo_text.py:101 #: ../textw/silo_text.py:213 msgid "SILO Configuration" msgstr "" #: ../text.py:1084 ../textw/lilo_text.py:36 ../textw/lilo_text.py:90 #: ../textw/lilo_text.py:217 msgid "LILO Configuration" msgstr "" #: ../text.py:1088 msgid "Automatic Partition" msgstr "" #: ../iw/lilo_gui.py:205 ../iw/lilo_gui.py:364 ../iw/silo_gui.py:127 #: ../iw/silo_gui.py:280 ../text.py:1090 ../text.py:1094 msgid "Partition" msgstr "" #: ../text.py:1092 msgid "Manually Partition" msgstr "" #: ../text.py:1096 ../textw/partitioning_text.py:310 msgid "Root Filesystem Size" msgstr "" #: ../text.py:1098 msgid "Swap" msgstr "" #: ../text.py:1100 ../textw/partitioning_text.py:365 #: ../textw/partitioning_text.py:385 msgid "Boot Partition Warning" msgstr "" #: ../text.py:1102 msgid "Filesystem Formatting" msgstr "" #: ../iw/mouse_gui.py:56 ../text.py:1119 ../text.py:1121 msgid "Mouse Configuration" msgstr "" #: ../text.py:1126 msgid "Language Default" msgstr "" #: ../text.py:1137 msgid "Package Groups" msgstr "" #: ../text.py:1139 ../text.py:1167 msgid "Individual Packages" msgstr "" #: ../text.py:1141 ../textw/packages_text.py:304 msgid "Package Dependencies" msgstr "" #: ../iw/xconfig_gui.py:1007 ../text.py:1143 ../text.py:1151 msgid "X Configuration" msgstr "" #: ../text.py:1145 msgid "Installation Begins" msgstr "" #: ../text.py:1147 msgid "Install System" msgstr "" #: ../text.py:1148 ../text.py:1150 ../text.py:1171 ../text.py:1173 msgid "Boot Disk" msgstr "" #: ../text.py:1153 msgid "Installation Complete" msgstr "" #: ../text.py:1158 msgid "Examine System" msgstr "" #: ../text.py:1165 msgid "Customize Upgrade" msgstr "" #: ../text.py:1168 msgid "Upgrade Begins" msgstr "" #: ../text.py:1170 msgid "Upgrade System" msgstr "" #: ../text.py:1174 msgid "Upgrade Complete" msgstr "" #: ../text.py:1210 msgid "Cancelled" msgstr "" #: ../text.py:1211 msgid "I can't go to the previous step from here. You will have to try again." msgstr "" #: ../todo.py:590 msgid "Creating boot disk..." msgstr "" #: ../todo.py:609 msgid "Reading" msgstr "" #: ../todo.py:610 msgid "Reading package information..." msgstr "" #: ../todo.py:858 msgid "Dependency Check" msgstr "" #: ../todo.py:859 msgid "Checking dependencies in packages selected for installation..." msgstr "" #: ../todo.py:886 ../todo.py:928 ../todo.py:934 ../todo.py:951 ../todo.py:1076 msgid "no suggestion" msgstr "" #: ../todo.py:966 msgid "" "One or more of the filesystems listed in the /etc/fstab on your Linux system " "cannot be mounted. Please fix this problem and try to upgrade again." msgstr "" #: ../todo.py:984 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" #: ../todo.py:998 msgid "Finding" msgstr "" #: ../todo.py:999 msgid "Finding packages to upgrade..." msgstr "" #: ../todo.py:1014 msgid "Rebuild of RPM database failed. You may be out of disk space?" msgstr "" #: ../todo.py:1027 msgid "An error occured when finding the packages to upgrade." msgstr "" #: ../todo.py:1364 msgid "Processing" msgstr "" #: ../todo.py:1365 msgid "Preparing to install..." msgstr "" #: ../todo.py:1399 #, c-format msgid "" "The file %s cannot be opened. This is due to a missing file, a bad package, " "or bad media. Press to try again." msgstr "" #: ../todo.py:1642 #, c-format msgid "Upgrading %s.\n" msgstr "" #: ../todo.py:1644 #, c-format msgid "Installing %s.\n" msgstr "" #: ../todo.py:1689 msgid "" "You don't appear to have enough disk space to install the packages you've " "selected. You need more space on the following filesystems:\n" "\n" msgstr "" #: ../libfdisk/gnomefsedit.c:3033 ../todo.py:1692 ../todo.py:1708 msgid "Mount Point" msgstr "" #: ../todo.py:1692 msgid "Space Needed" msgstr "" #: ../todo.py:1705 msgid "" "You don't appear to have enough file nodes to install the packages you've " "selected. You need more file nodes on the following filesystems:\n" "\n" msgstr "" #: ../todo.py:1708 msgid "Nodes Needed" msgstr "" #: ../todo.py:1714 msgid "Disk Space" msgstr "" #: ../todo.py:1749 msgid "Post Install" msgstr "" #: ../todo.py:1750 msgid "Performing post install configuration..." msgstr "" #: ../upgrade.py:10 msgid "Searching" msgstr "" #: ../upgrade.py:11 msgid "Searching for Red Hat Linux installations..." msgstr "" #: ../upgrade.py:22 ../upgrade.py:50 #, c-format msgid "Error mounting ext2 filesystem on %s: %s" msgstr "" #: ../upgrade.py:94 msgid "" "One or more of the filesystems for your Linux system was not unmounted " "cleanly. Please boot your Linux installation, let the filesystems be " "checked, and shut down cleanly to upgrade." msgstr "" #: ../iw/xconfig_gui.py:12 ../xf86config.py:929 msgid "Video Card" msgstr "" #: ../iw/xconfig_gui.py:14 ../xf86config.py:931 msgid "Video Ram" msgstr "" #: ../xf86config.py:934 msgid "X server" msgstr "" #: ../xf86config.py:937 msgid "Unable to detect video card" msgstr "" #: ../iw/xconfig_gui.py:13 ../xf86config.py:944 ../xf86config.py:946 msgid "Monitor" msgstr "" #: ../xf86config.py:946 msgid "Plug and Play Monitor" msgstr "" #: ../xf86config.py:948 msgid "Horizontal frequency range" msgstr "" #: ../xf86config.py:950 msgid "Vertical frequency range" msgstr "" #: ../xserver.py:26 msgid "Mouse Not Detected" msgstr "" #: ../xserver.py:27 msgid "" "Your mouse was not automatically detected. To proceed in the graphical " "installation mode, please proceed to the next screen and provide your mouse " "information. You may also use text mode installation which does not require " "a mouse." msgstr "" #: ../xserver.py:33 ../xserver.py:34 msgid "Use text mode" msgstr "" #: ../iw/account_gui.py:15 msgid "Account Configuration" msgstr "" #: ../iw/account_gui.py:36 msgid "Root password accepted." msgstr "" #: ../iw/account_gui.py:39 msgid "Please enter root password." msgstr "" #: ../iw/account_gui.py:41 msgid "Root password is too short." msgstr "" #: ../iw/account_gui.py:43 msgid "Root passwords do not match." msgstr "" #: ../iw/account_gui.py:56 msgid "User password accepted." msgstr "" #: ../iw/account_gui.py:61 msgid "Root account can not be added here." msgstr "" #: ../iw/account_gui.py:63 msgid "Please enter user password." msgstr "" #: ../iw/account_gui.py:65 msgid "User password is too short." msgstr "" #: ../iw/account_gui.py:67 msgid "User passwords do not match." msgstr "" #: ../iw/account_gui.py:187 msgid "Root Password: " msgstr "" #: ../iw/account_gui.py:190 msgid "Confirm: " msgstr "" #: ../iw/account_gui.py:251 ../iw/account_gui.py:300 msgid "Account Name" msgstr "" #: ../iw/account_gui.py:255 ../textw/userauth_text.py:81 msgid "Password" msgstr "" #: ../iw/account_gui.py:259 ../textw/userauth_text.py:82 msgid "Password (confirm)" msgstr "" #: ../iw/account_gui.py:270 ../iw/account_gui.py:300 #: ../textw/userauth_text.py:83 ../textw/userauth_text.py:184 msgid "Full Name" msgstr "" #: ../iw/account_gui.py:279 ../libfdisk/newtfsedit.c:1480 #: ../textw/userauth_text.py:198 msgid "Add" msgstr "" #: ../iw/account_gui.py:281 ../libfdisk/newtfsedit.c:1473 #: ../libfdisk/newtfsedit.c:1481 ../textw/lilo_text.py:208 #: ../textw/lilo_text.py:231 ../textw/partitioning_text.py:63 #: ../textw/silo_text.py:205 ../textw/silo_text.py:227 #: ../textw/userauth_text.py:199 msgid "Edit" msgstr "" #: ../iw/account_gui.py:283 ../libfdisk/newtfsedit.c:1481 #: ../textw/userauth_text.py:198 msgid "Delete" msgstr "" #: ../iw/account_gui.py:285 msgid "New" msgstr "" #: ../iw/auth_gui.py:11 ../textw/userauth_text.py:299 msgid "Authentication Configuration" msgstr "" #: ../iw/auth_gui.py:78 msgid "Enable MD5 passwords" msgstr "" #: ../iw/auth_gui.py:79 msgid "Enable shadow passwords" msgstr "" #: ../iw/auth_gui.py:82 ../textw/userauth_text.py:308 msgid "Enable NIS" msgstr "" #: ../iw/auth_gui.py:83 msgid "Use broadcast to find NIS server" msgstr "" #: ../iw/auth_gui.py:95 msgid "NIS Domain: " msgstr "" #: ../iw/auth_gui.py:97 msgid "NIS Server: " msgstr "" #: ../iw/auth_gui.py:136 ../textw/userauth_text.py:342 msgid "Enable LDAP" msgstr "" #: ../iw/auth_gui.py:139 msgid "Use TLS lookups" msgstr "" #: ../iw/auth_gui.py:140 ../textw/userauth_text.py:348 msgid "LDAP Server:" msgstr "" #: ../iw/auth_gui.py:142 ../textw/userauth_text.py:350 msgid "LDAP Base DN:" msgstr "" #: ../iw/auth_gui.py:173 ../textw/userauth_text.py:371 msgid "Enable Kerberos" msgstr "" #: ../iw/auth_gui.py:177 ../textw/userauth_text.py:378 msgid "Realm:" msgstr "" #: ../iw/auth_gui.py:179 ../textw/userauth_text.py:380 msgid "KDC:" msgstr "" #: ../iw/auth_gui.py:181 ../textw/userauth_text.py:382 msgid "Admin Server:" msgstr "" #: ../iw/bootdisk_gui.py:11 msgid "Bootdisk Creation" msgstr "" #: ../iw/bootdisk_gui.py:58 msgid "" "Please remove the install floppy (if used) and insert a blank floppy in the " "first floppy drive. All data on this disk will be erased during creation of " "the boot disk." msgstr "" #: ../iw/bootdisk_gui.py:62 ../textw/bootdisk_text.py:70 msgid "" "An error occured while making the boot disk. Please make sure that there is " "a formatted floppy in the first floppy drive." msgstr "" #: ../iw/bootdisk_gui.py:69 msgid "Skip boot disk creation" msgstr "" #: ../iw/confirm_gui.py:13 msgid "About to Upgrade" msgstr "" #: ../iw/confirm_gui.py:16 msgid "About to Install" msgstr "" #: ../iw/confirm_gui.py:34 msgid "Click next to begin upgrade of Red Hat Linux." msgstr "" #: ../iw/confirm_gui.py:36 msgid "Click next to begin installation of Red Hat Linux." msgstr "" #: ../iw/congrats_gui.py:11 ../iw/congrats_gui.py:60 msgid "Congratulations" msgstr "" #: ../iw/congrats_gui.py:83 msgid "" "Congratulations, configuration is complete.\n" "\n" "For information on fixes which are available for this release of Red Hat " "Linux, consult the Errata available from http://www.redhat.com.\n" "\n" "Information on further configuring your system is available in the Official " "Red Hat Linux Manuals available at http://www.redhat.com/support/manuals/." msgstr "" #: ../iw/dependencies_gui.py:9 msgid "Unresolved Dependencies" msgstr "" #: ../iw/dependencies_gui.py:31 ../iw/package_gui.py:524 #: ../textw/packages_text.py:12 ../textw/packages_text.py:275 #, c-format msgid "Total install size: %s" msgstr "" #: ../iw/dependencies_gui.py:69 ../iw/package_gui.py:380 #: ../iw/progress_gui.py:191 ../textw/packages_text.py:312 msgid "Package" msgstr "" #: ../iw/dependencies_gui.py:69 ../textw/packages_text.py:312 msgid "Requirement" msgstr "" #: ../iw/dependencies_gui.py:87 ../textw/packages_text.py:327 msgid "Install packages to satisfy dependencies" msgstr "" #: ../iw/dependencies_gui.py:90 ../textw/packages_text.py:328 msgid "Do not install packages that have dependencies" msgstr "" #: ../iw/dependencies_gui.py:94 ../textw/packages_text.py:329 msgid "Ignore package dependencies" msgstr "" #: ../iw/examine_gui.py:10 msgid "Upgrade Examine" msgstr "" #: ../iw/examine_gui.py:36 msgid "" "You don't have any Linux partitions.\n" " You can't upgrade this sytem!" msgstr "" #: ../iw/examine_gui.py:45 msgid "Please select the device containing the root filesystem: " msgstr "" #: ../iw/examine_gui.py:73 msgid "Customize packages to be upgraded" msgstr "" #: ../iw/fdisk_gui.py:12 ../textw/partitioning_text.py:22 msgid "fdisk" msgstr "" #: ../iw/fdisk_gui.py:106 msgid "Select drive to run fdisk on" msgstr "" #: ../iw/firewall_gui.py:59 msgid "Please choose your security level: " msgstr "" #: ../iw/firewall_gui.py:68 ../textw/firewall_text.py:33 msgid "High" msgstr "" #: ../iw/firewall_gui.py:69 ../textw/firewall_text.py:36 msgid "Medium" msgstr "" #: ../iw/firewall_gui.py:70 ../textw/firewall_text.py:39 msgid "No firewall" msgstr "" #: ../iw/firewall_gui.py:87 msgid "Use default firewall rules" msgstr "" #: ../iw/firewall_gui.py:88 ../textw/firewall_text.py:9 msgid "Customize" msgstr "" #: ../iw/firewall_gui.py:101 msgid "Trusted devices:" msgstr "" #: ../iw/firewall_gui.py:111 ../textw/firewall_text.py:75 msgid "Allow incoming:" msgstr "" #: ../iw/firewall_gui.py:122 msgid "Other ports:" msgstr "" #: ../iw/format_gui.py:14 msgid "Choose partitions to Format" msgstr "" #: ../iw/format_gui.py:61 msgid "Check for bad blocks while formatting" msgstr "" #: ../iw/installpath_gui.py:97 msgid "Install Type" msgstr "" #: ../iw/installpath_gui.py:179 msgid "Install" msgstr "" #: ../iw/installpath_gui.py:181 msgid "Upgrade" msgstr "" #: ../iw/keyboard_gui.py:16 msgid "Keyboard Configuration" msgstr "" #: ../iw/keyboard_gui.py:86 msgid "Model" msgstr "" #: ../iw/keyboard_gui.py:105 msgid "Layout" msgstr "" #: ../iw/keyboard_gui.py:124 msgid "Dead Keys" msgstr "" #: ../iw/keyboard_gui.py:133 msgid "Enable dead keys" msgstr "" #: ../iw/keyboard_gui.py:134 msgid "Disable dead keys" msgstr "" #: ../iw/keyboard_gui.py:143 msgid "Test your selection here:" msgstr "" #: ../iw/language_gui.py:40 ../loader/lang.c:291 msgid "What language should be used during the installation process?" msgstr "" #: ../iw/language_support_gui.py:145 msgid "Choose the default language: " msgstr "" #: ../iw/language_support_gui.py:156 msgid "Choose the languages to install:" msgstr "" #: ../iw/language_support_gui.py:211 msgid "Select all" msgstr "" #: ../iw/language_support_gui.py:217 msgid "Reset" msgstr "" #: ../iw/language_support_gui.py:231 msgid "Select as default" msgstr "" #: ../iw/lilo_gui.py:30 msgid "Lilo Configuration" msgstr "" #: ../iw/lilo_gui.py:208 ../iw/lilo_gui.py:365 ../iw/silo_gui.py:132 #: ../iw/silo_gui.py:281 ../libfdisk/gnomefsedit.c:3037 msgid "Type" msgstr "" #: ../iw/lilo_gui.py:253 msgid "Install LILO boot record on:" msgstr "" #: ../iw/lilo_gui.py:260 ../iw/silo_gui.py:173 ../textw/lilo_text.py:87 #: ../textw/silo_text.py:64 msgid "Master Boot Record (MBR)" msgstr "" #: ../iw/lilo_gui.py:264 ../iw/silo_gui.py:176 ../textw/lilo_text.py:88 #: ../textw/silo_text.py:65 msgid "First sector of boot partition" msgstr "" #: ../iw/lilo_gui.py:268 ../textw/lilo_text.py:27 msgid "Use linear mode (needed for some SCSI drives)" msgstr "" #: ../iw/lilo_gui.py:279 ../iw/silo_gui.py:208 msgid "Kernel parameters" msgstr "" #: ../iw/lilo_gui.py:296 ../iw/silo_gui.py:226 msgid "Create boot disk" msgstr "" #: ../iw/lilo_gui.py:310 msgid "Install LILO" msgstr "" #: ../iw/lilo_gui.py:337 ../iw/silo_gui.py:257 ../textw/lilo_text.py:199 #: ../textw/silo_text.py:196 msgid "Default" msgstr "" #: ../iw/lilo_gui.py:337 ../iw/mouse_gui.py:145 ../iw/silo_gui.py:257 #: ../libfdisk/gnomefsedit.c:3034 ../textw/lilo_text.py:118 #: ../textw/lilo_text.py:199 ../textw/mouse_text.py:25 #: ../textw/silo_text.py:131 ../textw/silo_text.py:196 msgid "Device" msgstr "" #: ../iw/lilo_gui.py:337 ../iw/silo_gui.py:257 ../textw/lilo_text.py:199 #: ../textw/silo_text.py:196 msgid "Partition type" msgstr "" #: ../iw/lilo_gui.py:337 ../iw/lilo_gui.py:376 ../iw/silo_gui.py:257 #: ../iw/silo_gui.py:292 ../textw/lilo_text.py:119 ../textw/lilo_text.py:199 #: ../textw/silo_text.py:132 ../textw/silo_text.py:196 msgid "Boot label" msgstr "" #: ../iw/lilo_gui.py:372 ../iw/silo_gui.py:288 msgid "Default boot image" msgstr "" #: ../iw/mouse_gui.py:134 ../textw/mouse_text.py:7 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "" #: ../iw/mouse_gui.py:135 ../textw/mouse_text.py:8 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "" #: ../iw/mouse_gui.py:136 ../textw/mouse_text.py:9 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "" #: ../iw/mouse_gui.py:137 ../textw/mouse_text.py:10 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "" #: ../iw/mouse_gui.py:139 msgid "Emulate 3 Buttons" msgstr "" #: ../iw/mouse_gui.py:145 msgid "Port" msgstr "" #: ../iw/network_gui.py:11 ../textw/network_text.py:104 msgid "Network Configuration" msgstr "" #: ../iw/network_gui.py:170 msgid "Configure using DHCP" msgstr "" #: ../iw/network_gui.py:176 msgid "Activate on boot" msgstr "" #: ../iw/network_gui.py:185 msgid "IP Address" msgstr "" #: ../iw/network_gui.py:186 ../loader/net.c:729 msgid "Netmask" msgstr "" #: ../iw/network_gui.py:187 ../loader/loader.c:273 msgid "Network" msgstr "" #: ../iw/network_gui.py:188 msgid "Broadcast" msgstr "" #: ../iw/network_gui.py:232 ../loader/net.c:533 ../loader/net.c:731 #: ../textw/network_text.py:161 msgid "Hostname" msgstr "" #: ../iw/network_gui.py:233 msgid "Gateway" msgstr "" #: ../iw/network_gui.py:233 msgid "Primary DNS" msgstr "" #: ../iw/network_gui.py:233 msgid "Secondary DNS" msgstr "" #: ../iw/network_gui.py:233 msgid "Ternary DNS" msgstr "" #: ../iw/package_gui.py:25 msgid "Individual Package Selection" msgstr "" #: ../iw/package_gui.py:302 msgid "Total install size: " msgstr "" #: ../iw/package_gui.py:382 msgid "Size (MB)" msgstr "" #: ../iw/package_gui.py:413 msgid "Total size: " msgstr "" #: ../iw/package_gui.py:416 msgid "Select all in group" msgstr "" #: ../iw/package_gui.py:420 msgid "Unselect all in group" msgstr "" #: ../iw/package_gui.py:455 msgid "File not found" msgstr "" #: ../iw/package_gui.py:498 ../textw/packages_text.py:60 #: ../textw/packages_text.py:241 msgid "Package Group Selection" msgstr "" #: ../iw/package_gui.py:558 #, c-format msgid "" "The following error occurred while retreiving hdlist file:\n" "\n" "%s\n" "\n" "Installer will exit now." msgstr "" #: ../iw/package_gui.py:563 msgid "" "An error has occurred while retreiving the hdlist file. The installation " "media or image is probably corrupt. Installer will exit now." msgstr "" #: ../iw/package_gui.py:629 ../textw/packages_text.py:54 msgid "Select individual packages" msgstr "" #: ../iw/progress_gui.py:51 msgid "Installing Packages" msgstr "" #: ../iw/progress_gui.py:140 #, c-format msgid "%s KBytes" msgstr "" #: ../iw/progress_gui.py:192 ../iw/progress_gui.py:245 msgid "Size" msgstr "" #: ../iw/progress_gui.py:193 msgid "Summary" msgstr "" #: ../iw/progress_gui.py:223 msgid "Package Progress: " msgstr "" #: ../iw/progress_gui.py:228 msgid "Total Progress: " msgstr "" #: ../iw/progress_gui.py:245 msgid "Status" msgstr "" #: ../iw/progress_gui.py:245 msgid "Packages" msgstr "" #: ../iw/progress_gui.py:245 msgid "Time" msgstr "" #: ../iw/progress_gui.py:255 msgid "Total" msgstr "" #: ../iw/progress_gui.py:256 msgid "Completed" msgstr "" #: ../iw/progress_gui.py:257 msgid "Remaining" msgstr "" #: ../iw/rootpartition_gui.py:38 ../textw/partitioning_text.py:22 msgid "Disk Druid" msgstr "" #: ../iw/rootpartition_gui.py:50 ../textw/partitioning_text.py:213 msgid "Low Memory" msgstr "" #: ../iw/rootpartition_gui.py:51 ../textw/partitioning_text.py:214 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that okay?" msgstr "" #: ../iw/rootpartition_gui.py:149 ../textw/partitioning_text.py:311 #, c-format msgid "" "You've chosen to put your root filesystem in a file on an already-existing " "DOS or Windows filesystem. How large, in megabytes, should would you like " "the root filesystem to be, and how much swap space would you like? They must " "total less then %d megabytes in size." msgstr "" #: ../iw/rootpartition_gui.py:178 msgid "Root filesystem size:" msgstr "" #: ../iw/rootpartition_gui.py:183 msgid "Swap space size:" msgstr "" #: ../iw/rootpartition_gui.py:254 ../iw/rootpartition_gui.py:305 #: ../textw/partitioning_text.py:148 msgid "Automatic Partitioning" msgstr "" #: ../iw/rootpartition_gui.py:307 ../textw/partitioning_text.py:149 #, c-format msgid "" "%s\n" "\n" "If you don't want to do this, you can continue with this install by " "partitioning manually, or you can go back and perform a fully customized " "installation." msgstr "" #: ../iw/rootpartition_gui.py:313 msgid "Automatic Partitioning Failed" msgstr "" #: ../iw/rootpartition_gui.py:314 msgid "" "\n" "There is not sufficient disk space in order to automatically partition your " "disk. You will need to manually partition your disks for Red Hat Linux to " "install.\n" "\n" "Please choose the tool you would like to use to partition your system for " "Red Hat Linux." msgstr "" #: ../iw/rootpartition_gui.py:321 msgid "Manual Partitioning" msgstr "" #: ../iw/rootpartition_gui.py:322 msgid "" "\n" "Please choose the tool you would like to use to partition your system for " "Red Hat Linux." msgstr "" #: ../iw/rootpartition_gui.py:336 msgid "Automatically partition and REMOVE DATA" msgstr "" #: ../iw/rootpartition_gui.py:343 msgid "Manually partition with Disk Druid" msgstr "" #: ../iw/rootpartition_gui.py:355 msgid "Manually partition with fdisk [experts only]" msgstr "" #: ../iw/rootpartition_gui.py:378 msgid "Boot Partition Location Warning" msgstr "" #: ../iw/rootpartition_gui.py:399 ../textw/partitioning_text.py:366 msgid "" "You have put the partition containing the kernel (the boot partition) above " "the 1023 cylinder limit, and it appears that this systems BIOS does not " "support booting from above this limit. Proceeding will most likely make the " "system unable to reboot into Linux.\n" "\n" "If you choose to proceed, it is HIGHLY recommended you make a boot floppy " "when asked. This will guarantee you have a way to boot into the system after " "installation.\n" "\n" "Are you sure you want to proceed?" msgstr "" #: ../iw/rootpartition_gui.py:412 ../textw/partitioning_text.py:386 msgid "" "You have put the partition containing the kernel (the boot partition) above " "the 1023 cylinder limit. It appears that this systems BIOS supports booting " "from above this limit. \n" "\n" "It is HIGHLY recommended you make a boot floppy when asked by the installer, " "as this is a new feature in recent motherboards and is not always reliable. " "Making a boot disk will guarantee you can boot your system once installed." msgstr "" #: ../iw/silo_gui.py:20 msgid "Silo Configuration" msgstr "" #: ../iw/silo_gui.py:164 msgid "Install SILO boot record on:" msgstr "" #: ../iw/silo_gui.py:181 msgid "Create PROM alias" msgstr "" #: ../iw/silo_gui.py:204 msgid "Set default PROM boot device to linux" msgstr "" #: ../iw/silo_gui.py:236 msgid "Do not install SILO" msgstr "" #: ../iw/timezone_gui.py:31 ../textw/timezone_text.py:89 msgid "Time Zone Selection" msgstr "" #. pick New York City as default #: ../gnome-map/gglobe-canvas.c:781 ../gnome-map/timezonemapmodule.c:766 #: ../gnome-map/timezonemapmodule.c:768 ../iw/timezone_gui.py:140 msgid "America/New_York" msgstr "" #: ../iw/timezone_gui.py:157 msgid "View:" msgstr "" #: ../iw/timezone_gui.py:165 ../iw/timezone_gui.py:166 msgid "System clock uses UTC" msgstr "" #: ../iw/timezone_gui.py:214 msgid "Use Daylight Saving Time (US only)" msgstr "" #: ../iw/timezone_gui.py:228 msgid "Location" msgstr "" #: ../iw/timezone_gui.py:229 msgid "UTC Offset" msgstr "" #: ../iw/welcome_gui.py:81 msgid "Would you like to configure your system?" msgstr "" #: ../iw/xconfig_gui.py:15 msgid "Horizontal Frequency Range" msgstr "" #: ../iw/xconfig_gui.py:16 msgid "Vertical Frequency Range" msgstr "" #: ../iw/xconfig_gui.py:17 msgid "Test failed" msgstr "" #: ../iw/xconfig_gui.py:25 msgid "Customize Graphics Configuration" msgstr "" #: ../iw/xconfig_gui.py:255 msgid "Color Depth:" msgstr "" #: ../iw/xconfig_gui.py:283 msgid "Screen Resolution:" msgstr "" #: ../iw/xconfig_gui.py:393 msgid " Test Setting " msgstr "" #: ../iw/xconfig_gui.py:410 msgid "Please choose your default desktop environment:" msgstr "" #: ../iw/xconfig_gui.py:420 ../iw/xconfig_gui.py:485 msgid "GNOME" msgstr "" #: ../iw/xconfig_gui.py:422 ../iw/xconfig_gui.py:499 msgid "KDE" msgstr "" #: ../iw/xconfig_gui.py:465 msgid "Your desktop environment is:" msgstr "" #: ../iw/xconfig_gui.py:510 msgid "Please choose your login type:" msgstr "" #: ../iw/xconfig_gui.py:519 msgid "Text" msgstr "" #: ../iw/xconfig_gui.py:520 msgid "Graphical" msgstr "" #: ../iw/xconfig_gui.py:560 msgid "Bits per Pixel" msgstr "" #: ../iw/xconfig_gui.py:580 msgid "Monitor Configuration" msgstr "" #: ../iw/xconfig_gui.py:931 msgid "Horizontal Sync" msgstr "" #: ../iw/xconfig_gui.py:940 msgid "Vertical Sync" msgstr "" #: ../iw/xconfig_gui.py:952 ../iw/xconfig_gui.py:1763 msgid "Restore original values" msgstr "" #: ../iw/xconfig_gui.py:964 msgid "Horizontal Sync:" msgstr "" #: ../iw/xconfig_gui.py:966 msgid "Vertical Sync:" msgstr "" #: ../iw/xconfig_gui.py:972 msgid "Hz" msgstr "" #: ../iw/xconfig_gui.py:975 msgid "kHz" msgstr "" #: ../iw/xconfig_gui.py:1165 msgid "" "Your video ram size can not be autodetected. Choose your video ram size " "from the choices below:" msgstr "" #: ../iw/xconfig_gui.py:1176 ../iw/xconfig_gui.py:1197 msgid "" "In most cases your video hardware can be probed to automatically determine " "the best settings for your display." msgstr "" #: ../iw/xconfig_gui.py:1185 msgid "" "If the probed settings do not match your hardware select the correct setting " "below:" msgstr "" #: ../iw/xconfig_gui.py:1206 msgid "Autoprobe results:" msgstr "" #: ../iw/xconfig_gui.py:1692 msgid "Video card RAM: " msgstr "" #: ../iw/xconfig_gui.py:1767 msgid "Skip X Configuration" msgstr "" #: ../textw/bootdisk_text.py:13 msgid "" "A custom boot disk provides a way of booting into your Linux system without " "depending on the normal bootloader. This is useful if you don't want to " "install lilo on your system, another operating system removes lilo, or lilo " "doesn't work with your hardware configuration. A custom boot disk can also " "be used with the Red Hat rescue image, making it much easier to recover from " "severe system failures.\n" "\n" "Would you like to create a boot disk for your system?" msgstr "" #: ../textw/bootdisk_text.py:32 msgid "" "\n" "On SMCC made Ultra machines floppy booting probably does not work\n" "\n" msgstr "" #: ../textw/bootdisk_text.py:35 ../textw/bootdisk_text.py:56 msgid "Bootdisk" msgstr "" #: ../textw/bootdisk_text.py:54 ../textw/bootdisk_text.py:62 #: ../textw/bootdisk_text.py:73 ../textw/lilo_text.py:33 #: ../textw/silo_text.py:25 msgid "Skip" msgstr "" #: ../textw/bootdisk_text.py:57 msgid "" "If you have the install floppy in your drive, first remove it. Then insert a " "blank floppy in the first floppy drive. All data on this disk will be erased " "during creation of the boot disk." msgstr "" #: ../textw/firewall_text.py:13 msgid "" "A firewall protects against unauthorized network intrusions. High security " "blocks all incoming accesses. Medium blocks access to system services (such " "as telnet or printing), but allows other connections. No firewall allows all " "connections and is not recommended. " msgstr "" #: ../textw/firewall_text.py:29 msgid "Security Level:" msgstr "" #: ../textw/firewall_text.py:58 msgid "Trusted Devices:" msgstr "" #: ../textw/firewall_text.py:80 msgid "DHCP" msgstr "" #: ../textw/firewall_text.py:82 msgid "SSH" msgstr "" #: ../textw/firewall_text.py:84 msgid "Telnet" msgstr "" #: ../textw/firewall_text.py:86 msgid "WWW (HTTP)" msgstr "" #: ../textw/firewall_text.py:88 msgid "Mail (SMTP)" msgstr "" #: ../loader/loader.c:1233 ../loader/loader.c:1242 #: ../textw/firewall_text.py:90 msgid "FTP" msgstr "" #: ../textw/firewall_text.py:94 msgid "Other ports" msgstr "" #: ../textw/firewall_text.py:120 msgid "Invalid Choice" msgstr "" #: ../textw/firewall_text.py:121 msgid "You cannot customize a disabled firewall." msgstr "" #: ../textw/firewall_text.py:126 msgid "Firewall Configuration - Customize" msgstr "" #: ../textw/firewall_text.py:128 msgid "" "You can customize your firewall in two ways. First, you can select to allow " "all traffic from certain network interfaces. Second, you can allow certain " "protocols explicitly through the firewall. Specify additional ports in the " "form 'service:protocol', such as 'imap:tcp'. " msgstr "" #: ../textw/lilo_text.py:21 ../textw/silo_text.py:14 msgid "" "A few systems will need to pass special options to the kernel at boot time " "for the system to function properly. If you need to pass boot options to the " "kernel, enter them now. If you don't need any or aren't sure, leave this " "blank." msgstr "" #: ../textw/lilo_text.py:91 ../textw/silo_text.py:103 msgid "Where do you want to install the bootloader?" msgstr "" #: ../textw/lilo_text.py:123 ../textw/silo_text.py:136 #: ../textw/silo_text.py:157 msgid "Clear" msgstr "" #: ../textw/lilo_text.py:132 msgid "Edit Boot Label Please" msgstr "" #: ../textw/lilo_text.py:150 ../textw/lilo_text.py:155 msgid "Invalid Boot Label" msgstr "" #: ../textw/lilo_text.py:151 msgid "Boot label may not be empty." msgstr "" #: ../textw/lilo_text.py:156 msgid "Boot label contains illegal characters." msgstr "" #: ../textw/lilo_text.py:212 ../textw/silo_text.py:208 msgid "" "The boot manager Red Hat uses can boot other operating systems as well. You " "need to tell me what partitions you would like to be able to boot and what " "label you want to use for each of them." msgstr "" #: ../textw/mouse_text.py:26 msgid "What device is your mouse located on?" msgstr "" #: ../textw/mouse_text.py:57 msgid "Which model mouse is attached to this computer?" msgstr "" #: ../textw/mouse_text.py:68 msgid "Emulate 3 Buttons?" msgstr "" #: ../textw/mouse_text.py:71 msgid "Mouse Selection" msgstr "" #: ../textw/network_text.py:66 msgid "Use bootp/dhcp" msgstr "" #: ../loader/net.c:286 ../textw/network_text.py:71 msgid "IP address:" msgstr "" #: ../loader/net.c:289 ../textw/network_text.py:72 msgid "Netmask:" msgstr "" #: ../loader/net.c:292 ../textw/network_text.py:73 msgid "Default gateway (IP):" msgstr "" #: ../loader/net.c:295 ../textw/network_text.py:74 msgid "Primary nameserver:" msgstr "" #: ../textw/network_text.py:75 msgid "Secondary nameserver:" msgstr "" #: ../textw/network_text.py:76 msgid "Ternary nameserver:" msgstr "" #: ../textw/network_text.py:121 msgid "Invalid information" msgstr "" #: ../textw/network_text.py:122 msgid "You must enter valid IP information to continue" msgstr "" #: ../textw/network_text.py:157 msgid "Hostname Configuration" msgstr "" #: ../textw/network_text.py:158 msgid "" "The hostname is the name of your computer. If your computer is attached to " "a network, this may be assigned by your network administrator." msgstr "" #: ../textw/packages_text.py:91 msgid "Package :" msgstr "" #: ../textw/packages_text.py:96 msgid "Size :" msgstr "" #: ../textw/packages_text.py:97 #, c-format msgid "%.1f KBytes" msgstr "" #: ../textw/packages_text.py:116 msgid "Total size" msgstr "" #: ../textw/packages_text.py:249 msgid "" " ,<+>,<-> selection | help | package description" msgstr "" #: ../textw/packages_text.py:306 msgid "" "Some of the packages you have selected to install require packages you have " "not selected. If you just select Ok all of those required packages will be " "installed." msgstr "" #: ../textw/partitioning_text.py:14 ../textw/partitioning_text.py:57 msgid "Disk Setup" msgstr "" #: ../textw/partitioning_text.py:15 msgid "" "Disk Druid is a tool for partitioning and setting up mount points. It is " "designed to be easier to use than Linux's traditional disk partitioning " "sofware, fdisk, as well as more powerful. However, there are some cases " "where fdisk may be preferred.\n" "\n" "Which tool would you like to use?" msgstr "" #: ../textw/partitioning_text.py:58 msgid "" "To install Red Hat Linux, you must have at least one partition of 150 MB " "dedicated to Linux. We suggest placing that partition on one of the first " "two hard drives in your system so you can boot into Linux with LILO." msgstr "" #: ../loader/loader.c:338 ../loader/loader.c:363 #: ../textw/partitioning_text.py:63 msgid "Done" msgstr "" #: ../textw/partitioning_text.py:153 ../textw/partitioning_text.py:155 msgid "Continue" msgstr "" #: ../textw/partitioning_text.py:153 msgid "Manually partition" msgstr "" #: ../textw/partitioning_text.py:234 msgid "" "What partitions would you like to format? We strongly suggest formatting all " "of the system partitions, including /, /usr, and /var. There is no need to " "format /home or /usr/local if they have already been configured during a " "previous install." msgstr "" #: ../textw/partitioning_text.py:254 msgid "Check for bad blocks during format" msgstr "" #: ../textw/partitioning_text.py:259 msgid "Choose Partitions to Format" msgstr "" #: ../textw/partitioning_text.py:316 msgid "Root filesystem size" msgstr "" #: ../textw/partitioning_text.py:317 msgid "Swap space" msgstr "" #: ../textw/partitioning_text.py:327 ../textw/partitioning_text.py:333 #: ../textw/partitioning_text.py:340 msgid "Bad Size" msgstr "" #: ../textw/partitioning_text.py:328 msgid "The size you enter must be a number." msgstr "" #: ../textw/partitioning_text.py:334 #, c-format msgid "" "The total size must be smaller then the amount of free space on the disk, " "which is %d megabytes." msgstr "" #: ../textw/partitioning_text.py:341 msgid "" "Neither the root file system size nor the swap space size may be greater " "then 2000 megabytes." msgstr "" #: ../textw/silo_text.py:66 msgid "Create PROM alias `linux'" msgstr "" #: ../textw/silo_text.py:67 msgid "Set default PROM boot device" msgstr "" #: ../textw/silo_text.py:144 msgid "Edit Boot Label" msgstr "" #: ../textw/timezone_text.py:71 msgid "What time zone are you located in?" msgstr "" #: ../textw/timezone_text.py:86 msgid "Hardware clock set to GMT?" msgstr "" #: ../textw/userauth_text.py:11 msgid "" "Pick a root password. You must type it twice to ensure you know what it is " "and didn't make a mistake in typing. Remember that the root password is a " "critical part of system security!" msgstr "" #: ../loader/urls.c:345 ../textw/userauth_text.py:24 msgid "Password:" msgstr "" #: ../textw/userauth_text.py:25 msgid "Password (again):" msgstr "" #: ../textw/userauth_text.py:41 ../textw/userauth_text.py:108 msgid "Password Length" msgstr "" #: ../textw/userauth_text.py:42 msgid "The root password must be at least 6 characters long." msgstr "" #: ../textw/userauth_text.py:46 ../textw/userauth_text.py:116 msgid "Password Mismatch" msgstr "" #: ../textw/userauth_text.py:47 ../textw/userauth_text.py:117 msgid "The passwords you entered were different. Please try again." msgstr "" #: ../textw/userauth_text.py:72 msgid "Edit User" msgstr "" #: ../textw/userauth_text.py:75 msgid "Add User" msgstr "" #: ../textw/userauth_text.py:80 msgid "User ID" msgstr "" #: ../textw/userauth_text.py:95 msgid "Bad User ID" msgstr "" #: ../textw/userauth_text.py:96 msgid "" "User IDs must be less than 8 characters and contain only characters A-Z, " "a-z, and 0-9." msgstr "" #: ../textw/userauth_text.py:103 msgid "Missing User ID" msgstr "" #: ../textw/userauth_text.py:104 msgid "You must provide a user ID" msgstr "" #: ../textw/userauth_text.py:109 msgid "The password must be at least 6 characters long." msgstr "" #: ../textw/userauth_text.py:125 ../textw/userauth_text.py:133 msgid "User Exists" msgstr "" #: ../textw/userauth_text.py:126 msgid "" "The root user is already configured. You don't need to add this user here." msgstr "" #: ../textw/userauth_text.py:134 msgid "This user id already exists. Choose another." msgstr "" #: ../textw/userauth_text.py:161 msgid "" "You should use a normal user account for most activities on your system. By " "not using the root account casually, you'll reduce the chance of disrupting " "your system's configuration." msgstr "" #: ../textw/userauth_text.py:174 msgid "" "What user account would you like to have on the system? You should have at " "least one non-root account for normal work, but multi-user systems can have " "any number of accounts set up." msgstr "" #: ../textw/userauth_text.py:184 msgid "User name" msgstr "" #: ../textw/userauth_text.py:211 msgid "Enter the information for the user." msgstr "" #: ../textw/userauth_text.py:229 msgid "Change the information for this user." msgstr "" #: ../textw/userauth_text.py:301 msgid "Use Shadow Passwords" msgstr "" #: ../textw/userauth_text.py:303 msgid "Enable MD5 Passwords" msgstr "" #: ../textw/userauth_text.py:314 msgid "NIS Domain:" msgstr "" #: ../textw/userauth_text.py:316 msgid "NIS Server:" msgstr "" #: ../textw/userauth_text.py:318 msgid "or use:" msgstr "" #: ../textw/userauth_text.py:321 msgid "Request server via broadcast" msgstr "" #: ../textw/userauth_text.py:360 msgid "Use TLS connections" msgstr "" #: ../installclasses/custom.py:9 msgid "Custom System" msgstr "" #: ../installclasses/custom.py:23 ../installclasses/workstation.py:30 msgid "" "You are about to erase any preexisting Linux installations on your system." msgstr "" #: ../installclasses/laptop.py:7 msgid "Laptop" msgstr "" #: ../installclasses/server.py:8 msgid "Server System" msgstr "" #: ../installclasses/server.py:38 msgid "" "You are about to erase ALL DATA on your hard drive to make room for your " "Linux installation." msgstr "" #: ../installclasses/workstation.py:7 ../libfdisk/gnomefsedit.c:2575 msgid "Workstation" msgstr "" #: ../libfdisk/fsedit.c:399 msgid "partitioning did not meet requirements" msgstr "" #: ../libfdisk/fsedit.c:917 ../libfdisk/fsedit.c:924 ../libfdisk/fsedit.c:931 #: ../libfdisk/fsedit.c:940 ../libfdisk/fsedit.c:967 ../libfdisk/fsedit.c:980 #: ../libfdisk/fsedit.c:990 msgid "Bad Mount Point" msgstr "" #: ../libfdisk/fsedit.c:918 #, c-format msgid "The %s directory must be on the root filesystem." msgstr "" #: ../libfdisk/fsedit.c:925 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points must begin with a leading /." msgstr "" #: ../libfdisk/fsedit.c:932 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may not end with a /." msgstr "" #: ../libfdisk/fsedit.c:941 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "Mount points may only printable characters." msgstr "" #: ../libfdisk/fsedit.c:949 msgid "" "You've asked to put your root (/) filesystem on a DOS-style FAT partition. " "You can do this, but you may not use any other filesystems for your Linux " "system. Additionally, there will be a speed penalty for not using " "Linux-native partitions. Do you want to continue?" msgstr "" #: ../libfdisk/fsedit.c:968 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "System partitions must be on Linux Native partitions." msgstr "" #: ../libfdisk/fsedit.c:981 #, c-format msgid "On this platform, /boot must be on a DOS-compatible filesystem %x." msgstr "" #: ../libfdisk/fsedit.c:991 #, c-format msgid "" "The mount point %s is illegal.\n" "\n" "/usr must be on a Linux Native partition or an NFS volume." msgstr "" #: ../libfdisk/fsedit.c:1019 msgid "Too Many Drives" msgstr "" #: ../libfdisk/fsedit.c:1020 msgid "" "You have more drives than this program supports. Please use the standard " "fdisk program to setup your drives and please notify Red Hat Software that " "you saw this message." msgstr "" #: ../libfdisk/fsedit.c:1029 msgid "Error Creating Device Nodes" msgstr "" #: ../libfdisk/fsedit.c:1030 msgid "" "An error has occurred while trying to create device nodes for the hard " "drives in your system. This may be because you have run out of disk space " "on the /tmp partition." msgstr "" #: ../libfdisk/fsedit.c:1046 msgid "No Drives Found" msgstr "" #: ../libfdisk/fsedit.c:1047 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem." msgstr "" #: ../libfdisk/fsedit.c:1375 ../libfdisk/fsedit.c:1438 #, c-format msgid "" "An error occurred reading the partition table for the block device %s. The " "error was" msgstr "" #: ../libfdisk/fsedit.c:1415 #, c-format msgid "" "The partition table on device %s is corrupted. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive." msgstr "" #: ../libfdisk/fsedit.c:1420 msgid "Bad Partition Table" msgstr "" #: ../libfdisk/fsedit.c:1421 msgid "Initialize" msgstr "" #: ../libfdisk/fsedit.c:1421 ../libfdisk/fsedit.c:1442 msgid "Skip Drive" msgstr "" #: ../libfdisk/fsedit.c:1442 ../loader/net.c:256 ../loader/net.c:381 msgid "Retry" msgstr "" #: ../libfdisk/fsedit.c:1454 msgid "BSD Disklabel" msgstr "" #: ../libfdisk/fsedit.c:1454 msgid "" "A disk with a BSD disklabel has been found. The Red Hat installation only " "supports BSD Disklabels in read-only mode, so you must use a custom install " "and fdisk (instead of Disk Druid) for machines with BSD Disklabels." msgstr "" #: ../libfdisk/fsedit.c:1484 #, c-format msgid "System error %d" msgstr "" #: ../libfdisk/fsedit.c:1493 ../libfdisk/fsedit.c:1495 msgid "Fdisk Error" msgstr "" #: ../libfdisk/gnomefsedit.c:551 ../libfdisk/gnomefsedit.c:856 #: ../libfdisk/gnomefsedit.c:1951 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:559 ../libfdisk/gnomefsedit.c:858 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:733 ../libfdisk/newtfsedit.c:871 msgid "Delete Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:734 ../libfdisk/newtfsedit.c:872 msgid "Are you sure you want to delete this partition?" msgstr "" #: ../libfdisk/gnomefsedit.c:783 ../libfdisk/newtfsedit.c:346 msgid "Cannot Edit Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:784 ../libfdisk/newtfsedit.c:347 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "edit other partitions." msgstr "" #: ../libfdisk/gnomefsedit.c:802 ../libfdisk/gnomefsedit.c:808 #: ../libfdisk/gnomefsedit.c:812 ../libfdisk/gnomefsedit.c:814 #: ../libfdisk/newtfsedit.c:370 ../libfdisk/newtfsedit.c:376 #: ../libfdisk/newtfsedit.c:380 ../libfdisk/newtfsedit.c:382 msgid "Edit Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:829 ../libfdisk/gnomefsedit.c:1934 #: ../libfdisk/newtfsedit.c:391 msgid "Mount Point:" msgstr "" #: ../libfdisk/gnomefsedit.c:871 ../libfdisk/newtfsedit.c:410 msgid "Size (Megs):" msgstr "" #: ../libfdisk/gnomefsedit.c:903 msgid "Use remaining space?" msgstr "" #: ../libfdisk/gnomefsedit.c:922 ../libfdisk/newtfsedit.c:442 msgid "Allocation Status:" msgstr "" #: ../libfdisk/gnomefsedit.c:926 ../libfdisk/newtfsedit.c:444 msgid "Successful" msgstr "" #: ../libfdisk/gnomefsedit.c:929 ../libfdisk/newtfsedit.c:446 msgid "Failed" msgstr "" #: ../libfdisk/gnomefsedit.c:941 ../libfdisk/newtfsedit.c:451 msgid "Failure Reason:" msgstr "" #: ../libfdisk/gnomefsedit.c:955 ../libfdisk/gnomefsedit.c:1972 msgid "Partition Type:" msgstr "" #: ../libfdisk/gnomefsedit.c:1038 ../libfdisk/newtfsedit.c:521 msgid "Allowable Drives:" msgstr "" #: ../libfdisk/gnomefsedit.c:1141 ../libfdisk/gnomefsedit.c:2171 #: ../libfdisk/newtfsedit.c:612 msgid "No Mount Point" msgstr "" #: ../libfdisk/gnomefsedit.c:1142 ../libfdisk/newtfsedit.c:613 msgid "" "You have not selected a mount point for this partition. Are you sure you " "want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1166 ../libfdisk/gnomefsedit.c:1203 #: ../libfdisk/gnomefsedit.c:2179 ../libfdisk/newtfsedit.c:636 #: ../libfdisk/newtfsedit.c:669 msgid "Mount Point Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1167 ../libfdisk/newtfsedit.c:637 msgid "" "You have tried to assign the '/' mount point to a FAT-style partition. You " "cannot do this now because mount points have been assigned to ext2 " "partitions also. Clear those mount points and then you will be able to " "assign '/' to this partition." msgstr "" #: ../libfdisk/gnomefsedit.c:1204 ../libfdisk/newtfsedit.c:670 msgid "" "The mount point requested is either an illegal path or is already in use. " "Please select a valid mount point." msgstr "" #: ../libfdisk/gnomefsedit.c:1237 ../libfdisk/newtfsedit.c:695 msgid "Size Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1238 ../libfdisk/newtfsedit.c:696 msgid "" "The size requested is illegal. Make sure the size is greater and zero (0), " "and is specified int decimal (base 10) format." msgstr "" #: ../libfdisk/gnomefsedit.c:1256 ../libfdisk/gnomefsedit.c:2314 #: ../libfdisk/newtfsedit.c:714 msgid "Swap Size Error" msgstr "" #: ../libfdisk/gnomefsedit.c:1257 ../libfdisk/gnomefsedit.c:2315 #: ../libfdisk/newtfsedit.c:715 #, c-format msgid "" "You have created a swap partition which is too large. The maximum size of a " "swap partition is %ld Megabytes." msgstr "" #: ../libfdisk/gnomefsedit.c:1271 ../libfdisk/newtfsedit.c:731 #, c-format msgid "" "It is recommended that the root (/) partition have a minimum size of %ld " "Megabytes. You are trying to create one which is %ld Megabytes, which could " "cause the install to fail.\n" "\n" "Are you sure you want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1279 ../libfdisk/newtfsedit.c:739 msgid "Warning: Root FS Size" msgstr "" #: ../libfdisk/gnomefsedit.c:1291 msgid "No Drives Specified" msgstr "" #: ../libfdisk/gnomefsedit.c:1293 msgid "You must constrain this partition to at least one drive." msgstr "" #: ../libfdisk/gnomefsedit.c:1301 ../libfdisk/gnomefsedit.c:1308 msgid "No RAID Drive Constraint" msgstr "" #: ../libfdisk/gnomefsedit.c:1303 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive.\n" " Are you sure you want to do this?" msgstr "" #: ../libfdisk/gnomefsedit.c:1310 msgid "" "You have configured a RAID partition without constraining the partition to a " "single drive. Please select one drive to constrain this partition to." msgstr "" #: ../libfdisk/gnomefsedit.c:1430 ../libfdisk/newtfsedit.c:845 msgid "Cannot Add Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:1431 ../libfdisk/newtfsedit.c:846 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "add other partitions." msgstr "" #. XXXXX - for now destroy the raid entry since it #. now contains unallocated partitions! #: ../libfdisk/gnomefsedit.c:1505 msgid "RAID Entry Incomplete" msgstr "" #: ../libfdisk/gnomefsedit.c:1506 #, c-format msgid "" "The raid device /dev/%s now contains partitions which are unallocated. The " "raid device /dev/%s will now be decomposed into its component partitions. " "Please recompose the raid device with allocated partitions." msgstr "" #: ../libfdisk/gnomefsedit.c:1555 msgid "Cannot Remove /boot" msgstr "" #: ../libfdisk/gnomefsedit.c:1556 msgid "" "You cannot remove \"/boot\" if \"/\" is on a RAID device. Switch \"/\" to a " "non-RAID device first." msgstr "" #. build list of why they all failed #: ../libfdisk/gnomefsedit.c:1620 ../libfdisk/gnomefsedit.c:1639 #: ../libfdisk/newtfsedit.c:138 ../libfdisk/newtfsedit.c:1676 msgid "Unallocated Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:1624 ../libfdisk/gnomefsedit.c:1634 #: ../libfdisk/newtfsedit.c:142 msgid "" "There are currently unallocated partition(s) present in the list of " "requested partitions. The unallocated partition(s) are shown below, along " "with the reason they were not allocated." msgstr "" #: ../libfdisk/gnomefsedit.c:1916 msgid "Cannot Edit Raid" msgstr "" #: ../libfdisk/gnomefsedit.c:1917 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "edit RAID devices." msgstr "" #: ../libfdisk/gnomefsedit.c:2017 msgid "RAID Device: /dev/" msgstr "" #: ../libfdisk/gnomefsedit.c:2040 msgid "RAID Type:" msgstr "" #: ../libfdisk/gnomefsedit.c:2077 msgid "Partitions For RAID Array:" msgstr "" #: ../libfdisk/gnomefsedit.c:2172 msgid "You have not selected a mount point. A mount point is required." msgstr "" #: ../libfdisk/gnomefsedit.c:2180 msgid "" "The mount point requested is already in use. Please select a valid mount " "point." msgstr "" #: ../libfdisk/gnomefsedit.c:2216 msgid "" "The bootable raid device can only include partitions from the first two " "drives on your system.\n" "\n" "These drives are: " msgstr "" #: ../libfdisk/gnomefsedit.c:2223 msgid "Booting From RAID Warning" msgstr "" #: ../libfdisk/gnomefsedit.c:2233 msgid "No RAID Device" msgstr "" #: ../libfdisk/gnomefsedit.c:2234 msgid "You need to selected a RAID device." msgstr "" #: ../libfdisk/gnomefsedit.c:2240 msgid "Used Raid Device" msgstr "" #: ../libfdisk/gnomefsedit.c:2241 #, c-format msgid "" "The raid device \"/dev/%s\" is already configured as a raid device. Please " "select another." msgstr "" #: ../libfdisk/gnomefsedit.c:2254 msgid "Not Enough Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:2256 msgid "" "You have not configured enough partitions for the RAID type you have " "selected." msgstr "" #: ../libfdisk/gnomefsedit.c:2264 msgid "Illegal /boot RAID Type" msgstr "" #: ../libfdisk/gnomefsedit.c:2266 msgid "Boot partitions (/boot) are only allowed on RAID-1." msgstr "" #: ../libfdisk/gnomefsedit.c:2274 msgid "Illegal RAID mountpoint" msgstr "" #: ../libfdisk/gnomefsedit.c:2276 msgid "" "RAID partitions cannot be mounted as root (/) on Alpha without a /boot " "partition (non-RAID) as well." msgstr "" #: ../libfdisk/gnomefsedit.c:2360 #, c-format msgid "" "The partition %s is a pre-existing partition in the set of partitions for " "this RAID device. The mount point is set to /boot. Are you sure that it is " "possible to boot from this partition?" msgstr "" #: ../libfdisk/gnomefsedit.c:2367 msgid "Use Pre-existing Partition?" msgstr "" #: ../libfdisk/gnomefsedit.c:2445 msgid "Cannot Add RAID Devices" msgstr "" #: ../libfdisk/gnomefsedit.c:2446 msgid "" "You have defined the '/' filesystem on a non-ext2 partition, so you cannot " "add RAID devices." msgstr "" #: ../libfdisk/gnomefsedit.c:2487 msgid "Auto-Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:2494 msgid "Using Existing Disk Space" msgstr "" #: ../libfdisk/gnomefsedit.c:2513 msgid "Remove Linux partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:2524 msgid "Use existing free space" msgstr "" #. workstation or server? #: ../libfdisk/gnomefsedit.c:2536 msgid "Intended Use" msgstr "" #: ../libfdisk/gnomefsedit.c:2555 ../libfdisk/gnomefsedit.c:2575 msgid "Server" msgstr "" #: ../libfdisk/gnomefsedit.c:2655 msgid "Delete RAID Device?" msgstr "" #: ../libfdisk/gnomefsedit.c:2656 msgid "Are you sure you want to remove this RAID device?" msgstr "" #: ../libfdisk/gnomefsedit.c:2709 ../libfdisk/newtfsedit.c:1781 msgid "Reset Partition Table" msgstr "" #: ../libfdisk/gnomefsedit.c:2711 ../libfdisk/newtfsedit.c:1783 msgid "Reset partition table to original contents? " msgstr "" #: ../libfdisk/gnomefsedit.c:2747 ../libfdisk/gnomefsedit.c:2798 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2749 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:2751 msgid "" msgstr "" #: ../libfdisk/gnomefsedit.c:3035 msgid "Requested" msgstr "" #: ../libfdisk/gnomefsedit.c:3036 msgid "Actual" msgstr "" #: ../libfdisk/gnomefsedit.c:3209 msgid "Drive" msgstr "" #: ../libfdisk/gnomefsedit.c:3210 msgid "Geom [C/H/S]" msgstr "" #: ../libfdisk/gnomefsedit.c:3211 msgid "Total (M)" msgstr "" #: ../libfdisk/gnomefsedit.c:3212 msgid "Free (M)" msgstr "" #: ../libfdisk/gnomefsedit.c:3213 msgid "Used (M)" msgstr "" #: ../libfdisk/gnomefsedit.c:3214 msgid "Used (%)" msgstr "" #: ../libfdisk/gnomefsedit.c:3462 msgid "Unallocated Partitions Exist..." msgstr "" #: ../libfdisk/gnomefsedit.c:3468 ../libfdisk/gnomefsedit.c:3486 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) or a " "RAID partition for the install to proceed." msgstr "" #: ../libfdisk/gnomefsedit.c:3557 msgid "Partitions" msgstr "" #: ../libfdisk/gnomefsedit.c:3587 msgid "_Add..." msgstr "" #: ../libfdisk/gnomefsedit.c:3594 msgid "_Edit..." msgstr "" #: ../libfdisk/gnomefsedit.c:3595 msgid "_Reset" msgstr "" #: ../libfdisk/gnomefsedit.c:3600 msgid "_Delete" msgstr "" #. try having make raid device button available in read-only mode too #: ../libfdisk/gnomefsedit.c:3613 msgid "_Make RAID Device" msgstr "" #: ../libfdisk/gnomefsedit.c:3623 msgid "Auto Partition" msgstr "" #: ../libfdisk/gnomefsedit.c:3632 msgid "Drive Summary" msgstr "" #: ../libfdisk/newtfsedit.c:204 msgid "Swap Partition" msgstr "" #: ../libfdisk/newtfsedit.c:210 msgid "Raid Partition" msgstr "" #: ../libfdisk/newtfsedit.c:365 msgid "Edit New Partition" msgstr "" #: ../libfdisk/newtfsedit.c:430 msgid "Use remaining space?:" msgstr "" #: ../libfdisk/newtfsedit.c:474 msgid "Type:" msgstr "" #: ../libfdisk/newtfsedit.c:488 msgid "Unknown" msgstr "" #: ../libfdisk/newtfsedit.c:1458 msgid "Current Disk Partitions" msgstr "" #: ../libfdisk/newtfsedit.c:1464 msgid " Mount Point Device Requested Actual Type" msgstr "" #: ../libfdisk/newtfsedit.c:1488 msgid "" " F1-Help F2-Add F3-Edit F4-Delete F5-Reset F12-Ok " msgstr "" #: ../libfdisk/newtfsedit.c:1491 msgid "Drive Summaries" msgstr "" #: ../libfdisk/newtfsedit.c:1493 msgid " Drive Geom [C/H/S] Total Used Free" msgstr "" #: ../libfdisk/newtfsedit.c:1607 msgid "No Root Partition" msgstr "" #: ../libfdisk/newtfsedit.c:1608 msgid "" "You must assign a root (/) partition to a Linux native partition (ext2) for " "the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1627 msgid "No Swap Partition" msgstr "" #: ../libfdisk/newtfsedit.c:1629 msgid "You must assign a swap partition for the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1655 msgid "No /boot/efi Partition" msgstr "" #: ../libfdisk/newtfsedit.c:1657 msgid "" "You must assign the mount point /boot/efi to a FAT-style primary partition " "for the install to proceed." msgstr "" #: ../libfdisk/newtfsedit.c:1678 msgid "" "There are unallocated partitions left. If you quit now they will not be " "written to the disk.\n" "\n" "Are you sure you want to exit?" msgstr "" #: ../libfdisk/newtfsedit.c:1694 msgid "Save Changes" msgstr "" #: ../libfdisk/newtfsedit.c:1696 msgid "Save changes to partition table(s)?" msgstr "" #: ../libfdisk/newtfsedit.c:1741 msgid "You may only delete NFS mounts." msgstr "" #: ../loader/cdrom.c:26 msgid "Other CDROM" msgstr "" #: ../loader/cdrom.c:32 msgid "CDROM type" msgstr "" #: ../loader/cdrom.c:32 msgid "What type of CDROM do you have?" msgstr "" #: ../loader/cdrom.c:89 msgid "Initializing CDROM..." msgstr "" #: ../loader/devices.c:77 msgid "Miscellaneous" msgstr "" #: ../loader/devices.c:86 msgid "" "This module can take parameters which affects its operation. If you don't " "know what parameters to supply, just skip this screen by pressing the \"OK\" " "button now." msgstr "" #: ../loader/devices.c:91 msgid "Module Parameters" msgstr "" #: ../loader/devices.c:207 ../loader/devices.c:214 ../loader/devices.c:333 #: ../loader/loader.c:286 ../loader/loader.c:347 ../loader/loader.c:363 msgid "Devices" msgstr "" #: ../loader/devices.c:209 msgid "Do you have a driver disk?" msgstr "" #: ../loader/devices.c:216 msgid "Insert your driver disk and press \"OK\" to continue." msgstr "" #: ../loader/devices.c:237 msgid "Failed to mount driver disk." msgstr "" #: ../loader/devices.c:244 msgid "" "The floppy disk you inserted is not a valid driver disk for this release of " "Red Hat Linux." msgstr "" #: ../loader/devices.c:304 msgid "" "Which driver should I try?. If the driver you need does not appear in this " "list, and you have a separate driver disk, please press F2." msgstr "" #: ../loader/devices.c:313 msgid "Specify module parameters" msgstr "" #: ../loader/devices.c:410 #, c-format msgid "Failed to insert %s module." msgstr "" #: ../loader/devices.c:456 #, c-format msgid "Failed to mount driver disk: %s." msgstr "" #: ../loader/devices.c:476 msgid "The wrong diskette was inserted." msgstr "" #: ../loader/devices.c:488 ../loader/loader.c:450 ../loader/loader.c:452 msgid "Loading" msgstr "" #: ../loader/devices.c:488 ../loader/windows.c:47 #, c-format msgid "Loading %s driver..." msgstr "" #: ../loader/devices.c:507 msgid "Driver Disk" msgstr "" #: ../loader/devices.c:508 #, c-format msgid "Please insert the %s driver disk now." msgstr "" #: ../loader/kickstart.c:58 ../loader/kickstart.c:68 ../loader/kickstart.c:107 msgid "Kickstart Error" msgstr "" #: ../loader/kickstart.c:59 #, c-format msgid "Error opening: kickstart file %s: %s" msgstr "" #: ../loader/kickstart.c:69 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "" #: ../loader/kickstart.c:108 #, c-format msgid "Error on line %d of kickstart file %s." msgstr "" #: ../loader/lang.c:291 msgid "Choose a Language" msgstr "" #: ../loader/lang.c:341 ../loader/loader.c:153 msgid "Welcome to Red Hat Linux" msgstr "" #: ../loader/lang.c:342 ../loader/loader.c:155 msgid "" " / between elements | selects | next screen " msgstr "" #: ../loader/lang.c:580 msgid "Keyboard Type" msgstr "" #: ../loader/lang.c:581 msgid "What type of keyboard do you have?" msgstr "" #: ../loader/loader.c:123 msgid "Local CDROM" msgstr "" #: ../loader/loader.c:126 msgid "NFS image" msgstr "" #: ../loader/loader.c:131 msgid "Hard drive" msgstr "" #: ../loader/loader.c:273 msgid "SCSI" msgstr "" #: ../loader/loader.c:287 msgid "What kind of device would you like to add" msgstr "" #: ../loader/loader.c:336 msgid "I have found the following devices in your system:" msgstr "" #: ../loader/loader.c:338 ../loader/loader.c:363 msgid "Add Device" msgstr "" #: ../loader/loader.c:364 msgid "" "I don't have any special device drivers loaded for your system. Would you " "like to load some now?" msgstr "" #: ../loader/loader.c:505 #, c-format msgid "Loading %s ramdisk..." msgstr "" #: ../loader/loader.c:515 msgid "Error loading ramdisk." msgstr "" #: ../loader/loader.c:580 ../loader/loader.c:2187 #, c-format msgid "Failed to read directory %s: %s" msgstr "" #: ../loader/loader.c:810 msgid "Hard Drives" msgstr "" #: ../loader/loader.c:811 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" #: ../loader/loader.c:825 msgid "" "What partition and directory on that partition hold the CD (iso9660) images " "for Red Hat Linux? If you don't see the disk drive you're using listed here, " "press F2 to configure additional devices." msgstr "" #: ../loader/loader.c:839 msgid "Directory holding images:" msgstr "" #: ../loader/loader.c:859 msgid "Select Partition" msgstr "" #: ../loader/loader.c:907 #, c-format msgid "Device %s does not appear to contain Red Hat CDROM images." msgstr "" #: ../loader/loader.c:962 msgid "" "I could not find a Red Hat Linux CDROM in any of your CDROM drives. Please " "insert the Red Hat CD and press \"OK\" to retry." msgstr "" #: ../loader/loader.c:1049 msgid "Networking Device" msgstr "" #: ../loader/loader.c:1050 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "" #: ../loader/loader.c:1132 msgid "That directory does not seem to contain a Red Hat installation tree." msgstr "" #: ../loader/loader.c:1137 msgid "I could not mount that directory from the server" msgstr "" #: ../loader/loader.c:1233 ../loader/loader.c:1242 msgid "HTTP" msgstr "" #: ../loader/loader.c:1234 msgid "Unable to retrieve the first install image" msgstr "" #: ../loader/loader.c:1243 msgid "Unable to retrieve the second install image" msgstr "" #: ../loader/loader.c:1273 msgid "FTP and HTTP installs require 20MB or more of system memory." msgstr "" #: ../loader/loader.c:1497 msgid "Rescue Method" msgstr "" #: ../loader/loader.c:1498 msgid "Installation Method" msgstr "" #: ../loader/loader.c:1500 msgid "What type of media contains the rescue image?" msgstr "" #: ../loader/loader.c:1502 msgid "What type of media contains the packages to be installed?" msgstr "" #: ../loader/loader.c:2141 msgid "Cannot find ks.cfg on boot floppy." msgstr "" #: ../loader/loader.c:2249 msgid "Updates Disk" msgstr "" #: ../loader/loader.c:2250 msgid "Insert your updates disk and press \"OK\" to continue." msgstr "" #: ../loader/loader.c:2255 msgid "" "The floppy disk you inserted is not a valid update disk for this release of " "Red Hat Linux." msgstr "" #: ../loader/loader.c:2263 msgid "Failed to mount floppy disk." msgstr "" #. Copy everything to /tmp/updates so .so files don't get run #. from /dev/floppy. We could (and probably should) get smarter #. about this at some point. #: ../loader/loader.c:2268 msgid "Updates" msgstr "" #: ../loader/loader.c:2268 msgid "Reading anaconda updates..." msgstr "" #: ../loader/loader.c:2471 msgid "IDE" msgstr "" #: ../loader/loader.c:2471 msgid "Initializing IDE modules..." msgstr "" #: ../loader/net.c:149 msgid "NFS server name:" msgstr "" #: ../loader/net.c:152 ../loader/urls.c:191 msgid "Red Hat directory:" msgstr "" #: ../loader/net.c:158 msgid "NFS Setup" msgstr "" #: ../loader/net.c:159 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your NFS server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecture" msgstr "" #: ../loader/net.c:241 msgid "Nameserver IP" msgstr "" #: ../loader/net.c:245 ../loader/net.c:727 msgid "Nameserver" msgstr "" #: ../loader/net.c:246 msgid "" "Your dynamic IP request returned IP configuration information, but it did " "not include a DNS nameserver. If you know what your nameserver is, please " "enter it now. If you don't have this information, you can leave this field " "blank and the install will continue." msgstr "" #: ../loader/net.c:256 msgid "Invalid IP Information" msgstr "" #: ../loader/net.c:257 msgid "You entered an invalid IP address." msgstr "" #: ../loader/net.c:280 msgid "" "Please enter the IP configuration for this machine. Each item should be " "entered as an IP address in dotted-decimal notation (for example, 1.2.3.4)." msgstr "" #: ../loader/net.c:322 msgid "Use dynamic IP configuration (BOOTP/DHCP)" msgstr "" #: ../loader/net.c:350 msgid "Configure TCP/IP" msgstr "" #: ../loader/net.c:381 msgid "Missing Information" msgstr "" #: ../loader/net.c:382 msgid "You must enter both a valid IP address and a netmask." msgstr "" #: ../loader/net.c:390 ../loader/net.c:661 msgid "Dynamic IP" msgstr "" #: ../loader/net.c:391 ../loader/net.c:662 msgid "Sending request for IP information..." msgstr "" #: ../loader/net.c:534 msgid "Determining host name and domain..." msgstr "" #: ../loader/net.c:645 ../loader/net.c:678 msgid "kickstart" msgstr "" #: ../loader/net.c:646 #, c-format msgid "bad argument to kickstart network command %s: %s" msgstr "" #: ../loader/net.c:679 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "" #: ../loader/net.c:721 msgid "Boot protocol to use" msgstr "" #: ../loader/net.c:723 msgid "Network gateway" msgstr "" #: ../loader/net.c:725 msgid "IP address" msgstr "" #: ../loader/net.c:734 msgid "Domain name" msgstr "" #: ../loader/net.c:737 msgid "Network device" msgstr "" #: ../loader/net.c:809 msgid "" " / between elements | selects | next " "screen" msgstr "" #: ../loader/net.c:810 #, c-format msgid "netconfig %s (C) 1999 Red Hat, Inc." msgstr "" #: ../loader/net.c:812 msgid "Network configuration" msgstr "" #: ../loader/net.c:813 msgid "Would you like to set up networking?" msgstr "" #: ../loader/pcmcia.c:34 msgid "PC Card" msgstr "" #: ../loader/pcmcia.c:35 msgid "Initializing PC Card Devices..." msgstr "" #: ../loader/pcmcia.c:104 msgid "PCMCIA" msgstr "" #: ../loader/pcmcia.c:105 msgid "Please insert your PCMCIA driver disk into your floppy drive now." msgstr "" #: ../loader/pcmcia.c:114 msgid "Failed to mount disk." msgstr "" #: ../loader/pcmcia.c:132 msgid "That floppy does not look like a Red Hat PCMCIA driver disk." msgstr "" #: ../loader/urls.c:79 #, c-format msgid "Failed to log into %s: %s" msgstr "" #: ../loader/urls.c:88 ../loader/urls.c:95 #, c-format msgid "Failed to retrieve %s: %s" msgstr "" #: ../loader/urls.c:100 msgid "Retrieving" msgstr "" #: ../loader/urls.c:160 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your FTP server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" #: ../loader/urls.c:169 msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your web server\n" " o the directory on that server containing\n" " Red Hat Linux for your architecure\n" msgstr "" #: ../loader/urls.c:187 msgid "FTP site name:" msgstr "" #: ../loader/urls.c:188 msgid "Web site name:" msgstr "" #: ../loader/urls.c:206 msgid "Use non-anonymous ftp" msgstr "" #: ../loader/urls.c:211 msgid "Use proxy server" msgstr "" #: ../loader/urls.c:223 msgid "FTP Setup" msgstr "" #: ../loader/urls.c:224 msgid "HTTP Setup" msgstr "" #: ../loader/urls.c:234 msgid "You must enter a server name." msgstr "" #: ../loader/urls.c:239 msgid "You must enter a directory." msgstr "" #: ../loader/urls.c:244 msgid "Unknown Host" msgstr "" #: ../loader/urls.c:245 #, c-format msgid "%s is not a valid hostname." msgstr "" #: ../loader/urls.c:316 msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below." msgstr "" #: ../loader/urls.c:321 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" #: ../loader/urls.c:342 msgid "Account name:" msgstr "" #: ../loader/urls.c:351 msgid "FTP Proxy:" msgstr "" #: ../loader/urls.c:352 msgid "HTTP Proxy:" msgstr "" #: ../loader/urls.c:356 msgid "FTP Proxy Port:" msgstr "" #: ../loader/urls.c:357 msgid "HTTP Proxy Port:" msgstr "" #: ../loader/windows.c:46 msgid "Loading SCSI driver" msgstr "" #: ../gnome-map/gglobe-canvas.c:24 msgid "Map Image to display" msgstr "" #: ../gnome-map/gglobe-canvas.c:25 msgid "Width of map (in pixels)" msgstr "" #: ../gnome-map/gglobe-canvas.c:26 msgid "Enable antialias" msgstr "" #: ../gnome-map/gglobe-canvas.c:100 msgid "World" msgstr "" #: ../gnome-map/gglobe-canvas.c:101 msgid "North America" msgstr "" #: ../gnome-map/gglobe-canvas.c:102 msgid "South America" msgstr "" #: ../gnome-map/gglobe-canvas.c:103 msgid "Indian Rim" msgstr "" #: ../gnome-map/gglobe-canvas.c:104 msgid "Europe" msgstr "" #: ../gnome-map/gglobe-canvas.c:105 msgid "Africa" msgstr "" #: ../gnome-map/gglobe-canvas.c:106 msgid "Asia" msgstr "" #: ../gnome-map/gglobe-canvas.c:713 ../gnome-map/timezonemapmodule.c:698 msgid "Cannot load timezone data" msgstr "" #: ../gnome-map/gglobe-canvas.c:719 ../gnome-map/timezonemapmodule.c:731 msgid "gglobe-canvas" msgstr "" #: ../gnome-map/gglobe-canvas.c:764 msgid "View: " msgstr "" # ../comps/comps-master:3 msgid "Base" msgstr "" # ../comps/comps-master:159 msgid "Printer Support" msgstr "" # ../comps/comps-master:184 msgid "X Window System" msgstr "" # ../comps/comps-master:402 msgid "Mail/WWW/News Tools" msgstr "" # ../comps/comps-master:440 msgid "DOS/Windows Connectivity" msgstr "" # ../comps/comps-master:451 msgid "Graphics Manipulation" msgstr "" # ../comps/comps-master:470 msgid "Games" msgstr "" # ../comps/comps-master:497 msgid "Multimedia Support" msgstr "" # ../comps/comps-master:542 msgid "Laptop Support" msgstr "" # ../comps/comps-master:548 msgid "Networked Workstation" msgstr "" # ../comps/comps-master:607 msgid "Dialup Workstation" msgstr "" # ../comps/comps-master:646 msgid "News Server" msgstr "" # ../comps/comps-master:652 msgid "NFS Server" msgstr "" # ../comps/comps-master:658 msgid "SMB (Samba) Server" msgstr "" # ../comps/comps-master:665 msgid "IPX/Netware(tm) Connectivity" msgstr "" # ../comps/comps-master:672 msgid "Anonymous FTP Server" msgstr "" # ../comps/comps-master:679 msgid "SQL Server" msgstr "" # ../comps/comps-master:689 msgid "Web Server" msgstr "" # ../comps/comps-master:710 msgid "DNS Name Server" msgstr "" # ../comps/comps-master:717 msgid "Network Management Workstation" msgstr "" # ../comps/comps-master:728 msgid "Authoring/Publishing" msgstr "" # ../comps/comps-master:758 msgid "Emacs" msgstr "" # ../comps/comps-master:778 msgid "Development" msgstr "" # ../comps/comps-master:937 msgid "Kernel Development" msgstr "" # ../comps/comps-master:943 msgid "Utilities" msgstr ""