Version 0 # The version 0 module-info format is ('|' denotes the left margin): # | # | [] # | "" # | "" ["" [""]] # |# # Stanzas are delimited by non-indented lines, and continued with indented lines. # Comments start in the first column, or are preceded only by whitespace. # The []'s above are not literal, they delimit optional material. # There can be multiple lines. # is the name of the module without any .ko extension, just # as the module name would be entered in /etc/modules.conf # is the base part of the string demanded by kerneld (eth, # scsi_hostadapter, etc.) # is an optional identifier to identify groups of similar # drivers, such as the non-scsi cdrom devices which are requested by # block-major-*; they are given an alias of "cdrom". # is a free-form string enclosed in quotes to describe # the module to a human reader # is an argument such as io or irq, as understood by the module # is a free-form description # is a regular expression which can be used to test the # validity of a user-entered string # is a default value. This should not be provided unless it is # almost always the correct value, and will not, say, hang a user's computer # if it is wrong # # Ideas for version 1 file format: # o Add long description, presumably including all known cards supported # by the module in question # o Sub-argument description, for arguments which have multiple parts # separated by commas, particularly ones which share code with boot-time # arguments. # o Optional architecture flag(?) # drivers/net directory 3c501 eth "3Com 3c501" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" 3c503 eth "3Com EtherLink II" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" xcvr "Transceiver (0 = BNC; 1 = AUI)" "[01]" 3c505 eth "3Com Etherlink Plus" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" 3c507 eth "3Com EtherLink16" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" 3c509 eth "3Com EtherLink III" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" 3c515 eth "3Com 3c515 Corkscrew" 3c59x eth "3Com 3c590/3c595/3c90x/3cx980" 82596 eth "Apricot 82596" #a2065 # eth # "Amiga Linux/68k A2065" ac3200 eth "Ansel Communications Model 3200" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" mem "Base shared memory address" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" acenic eth "Alteon AceNIC Gigabit" amd8111e eth "AMD8111 based 10/100 Ethernet Controller" #aironet4500_card # eth # "Aironet 4500 PCI-ISA-i365 wireless" arlan eth "Aironet Arlan 655" #apricot # eth # "Apricot 82596" # io "Base I/O address" "0x[0-9a-fA-F]+" # irq "IRQ level" "[0-9]+" #arcnet # arc # "ARCnet for IP driver" # io "Base I/O address" "0x[0-9a-fA-F]+" # irq "IRQ level" "[0-9]+" # shmem "Base shared memory address" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" #ariadne # eth # "Amiga Linux/m68k Ariadne" at1700 eth "Allied Telesis AT1700" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" #atarilance # eth # "Atari Linux/m68k VME Lance" # Not yet modularized #atp # atp # "Attached (pocket) ethernet adapter" b44 eth "Broadcom 4400 10/100 PCI ethernet adapter" bcm5700 eth "Broadcom BCM5700 10/100/1000 ethernet adapter" line_speed "Line speed" "1[0]+" cs89x0 eth "Crystal SemiconductorCS89[02]0" de4x5 eth "DE4x5, DE434, DE450, and DE500 DEC EtherWORKS" io "Base I/O address" "0x[0-9a-fA-F]+" de600 eth "D-Link DE-600 Ethernet pocket adapter" de620 eth "D-Link DE-620 Ethernet pocket adapter" depca eth "DEC DEPCA and EtherWORKS DE1xx, DE2xx, DE422" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" dgrs eth "Digi RightSwitch SE-4, SE-6" dma "Toggle DMA use" "[01]" spantree "Toggle Spantree" "[01]" hashexpire "Hash Expiration" ipaddr "List of four IP addresses" ipxnet "IPX network number" dl2k eth "D-Link DL2000-based Gigabit Ethernet Adapter" #dlci #dlci #"RFC 1490 Frame Relay protocol" dmfe eth "Davicom DM9102(A)/DM9132/DM9801 fast ethernet" dummy dummy "Placeholder device for intermittent links" e100 eth "Intel EtherExpress/100 driver" e1000 eth "Intel EtherExpress/1000 gigabit" e2100 eth "Cabletron E2100" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" mem "Base shared memory address" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" xcvr "Transceiver (0 = internal; 1 = external)" "[01]" eepro eth "EtherExpress Pro/10" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" eepro100 eth "Intel EtherExpress Pro 100B" eexpress eth "EtherExpress" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" epic100 eth "SMC 83c170 EPIC/100" eql eql "Load balancing for point-to-point network interfaces" es3210 eth "Racal-Interlan ES3210 EISA" eth16i eth "ICL EtherTeam 16i/32 EISA" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" ewrk3 eth "EtherWORKS 3: DE203, DE204, DE205" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" fealnx eth "Myson MTD-8xx 100/10M Ethernet PCI Adapter" forcedeth eth "nForce Ethernet Driver" fmv18x eth "Fujitsu FMV-181/182/183/184" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" hamachi eth "A Packet Engines GNIC-II Gigabit" hp-plus eth "HP PCLAN/plus" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" hp eth "HP LAN" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" hp100 eth "HP10/100VG ANY LAN: J257x, 27248B, J2585" hp100_port "Base I/O address" "0x[0-9a-fA-F]+" #hydra # eth # "Amiga Linux/m68k Hydra" ibmtr tr "Shared-memory IBM Token Ring 16/4" io "Base I/O address" "0x[0-9a-fA-F]+" lance eth "AT1500, HP J2405A, most NE2100/clone" # NOT YET MODULARIZED! #lance32 # eth # "AMD PCnet32, PCnetPCI" lne390 eth "Mylex LNE390 EISA" natsemi eth "NatSemi DP83815 Fast Ethernet" myri_sbus eth "MyriCOM MyriNET SBUS" ne eth "NE1000, NE2000, and compatible" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" ne2k-pci eth "PCI NE2000 clones" ne3210 eth "Novell NE3210 EISA" ni5010 eth "MiCom-Interlan NI5010" ni52 eth "NI5210 Ethernet" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" memstart "Base shared memory address" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" memend "Address of end of shared memory" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" ni65 eth "NI6510 Ethernet" ns83820 eth "Natsemi 83820 gigabit" olympic tr "IBM Olympic-based PCI roken ring" pcnet32 eth "AMD PCnet32" # not modularized #pi2 #ppp # ppp # "Point-to-Point Protocol" # NOT YET MODULARIZED! #pt 8139too eth "RTL8139, SMC EZ Card Fast Ethernet" 8139cp eth "RTL8139, SMC EZ Card Fast Ethernet" r8169 eth "RTL8169 Gigabit Ethernet" sis900 eth "SiS 900/7016 PCI Fast Ethernet" sk98lin eth "SysKonnect SK-98xx Gigabit" sdla sdla "Sangoma S502/S508" # NOT YET MODULARIZED! #seeq8005 # What's a seeq8005, anyway? From the comments in the file: # "seeq8005.c: A network driver for linux." No, really! # NOT YET MODULARIZED! #sk_g16 # eth # "Schneider & Koch (SK) G16" sktr tr "SysKonnect Token Ring ISA/PCI" # slhc is never loaded explicitly, only by dependencies #slip # sl # "Serial Link Internet Protocol" smc-ultra eth "SMC Ultra, SMC EtherEZ ISA" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" smc-ultra32 eth "SMC Ultra32 EISA" smc9194 eth "SMC 9000 series Ethernet" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" ifport "Interface: 0 auto, 1 TP, 2 AUI/BNC" "[012]" strip strip_proto "Starmode Radio IP" sunlance eth "Linux/Sparc/Lance Ethernet" sunbmac eth "Sun BigMac Ethernet" sundance eth "Sundance ST201 Alta" sunhme eth "Sun Happy Meal Ethernet" sunqe eth "Sun Quad Ethernet" tg3 eth "Broadcom Tigon3 Ethernet" tlan eth "ThunderLAN" tulip eth "DEC 21040, most 21*40 Ethernet" io "Base I/O address" "0x[0-9a-fA-F]+" tulip_old eth "Older DEC 21040, most 21*40 Ethernet" io "Base I/O address" "0x[0-9a-fA-F]+" tmspci tr "TMS380-based PCI token ring cards" typhoon eth "3Com Typhoon Family (3C990, 3CR990 and variants)" lanstreamer tr "IBM Auto LANStreamer" abyss tr "Madge Smart 16/4 PCI Mk2 token ring" via-rhine eth "VIA VT86c100A Rhine-II PCI" wavelan eth "AT&T GIS WaveLAN transceiver" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" wd eth "WD8003 and WD8013 `compatible' ethercards." io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" mem "Base shared memory address" "0x[0-9a-fA-F]+" mem_end "Address of end of shared memory (if non-standard size)" "0x[0-9a-fA-F]+" wic wic "parallel port network driver" winbond-840 eth "Compex RL100ATX-PCI" yellowfin eth "Packet Engines G-NIC PCI Gigabit" # S/390 stuff netiucv eth "S/390 Inter-User Communication Vehicle (iucv)" ctc eth "S/390 Channel to Channel" qeth eth "S/390 OSA-Express, Hipersocket" lcs eth "S/390 LCS, non-QDIO Token Ring" # iSeries veth eth "iSeries Virtual Ethernet" viodasd scsi_hostadapter "iSeries Virtual DASD" # Mac stuff bmac eth "Apple BMAC/BMAC+" mace eth "Apple MACE" sungem eth "Apple GMAC" airport eth "Apple Airport" # NOT YET MODULARIZED! #znet # eth # drivers/scsi directory # XXX this needs to be put back #53c7,8xx #scsi_hostadapter #"Symbios/NCR 53c700 and 53c800 series" 3w-xxxx scsi_hostadapter "3ware Storage Controller" AM53C974 scsi_hostadapter "AM53/79C974 (PCscsi) driver" BusLogic scsi_hostadapter "BusLogic MultiMaster SCSI" aacraid scsi_hostadapter "Adaptec AACRAID" aha152x scsi_hostadapter "Adaptec AHA-152x" aha152x "ioport, irq, host scsiid" aic7xxx scsi_hostadapter "Adaptec AHA-2740, 28xx, 29xx, 39xx" aic7xxx_mod scsi_hostadapter "New (experimental) Adaptec 28xx, 29xx, 39xx" aic7xxx_old scsi_hostadapter "Old Adaptec 28xx, 29xx, 39xx" aic79xx scsi_hostadapter "Adaptec Aic79xx SCSI Host Bus Adapter driver" ata_piix scsi_hostadapter "Intel PIIX/ICH ATA controllers" atp870u scsi_hostadapter "ACARD ATP870U PCI scsi controller" cciss scsi_hostadapter "Compaq Smart Array 5xxx Controller" cpqarray scsi_hostadapter "Compaq Smart/2 RAID Controller" DAC960 scsi_hostadapter "Mylex DAC960 RAID Controller" dpt_i2o scsi_hostadapter "Adaptec I2O RAID Driver" fcal scsi_hostadapter "Sun Enterprise Network Array (FC-AL)" gdth scsi_hostadapter "ICP RAID Controller" # not a module # gvp11 i2o_pci scsi "I2O driver" i2o_block scsi "I2O Block driver" ips scsi_hostadapter "IBM ServeRAID" megaraid scsi_hostadapter "MegaRAID 418, 428, 438, 466, 762" megaraid2 scsi_hostadapter "LSI MegaRAID Controllers" mptbase scsi_hostadapter "LSI Logic Fusion MPT Base Driver" mptscsih scsi_hostadapter "LSI Logic Fusion MPT SCSI Driver" ncr53c8xx scsi_hostadapter "Symbios/NCR 53C8xx" pluto scsi_hostadapter "SparcSTORAGE Array" pcd block-major-46 cdrom "Parallel-port IDE CDROM" qla1280 scsi_hostadapter "Qlogic 1280/12160" qla2x00 scsi_hostadapter "Qlogic 2x00" qla2200 scsi_hostadapter "Qlogic 2200" qla2300 scsi_hostadapter "Qlogic 2300" qlogicpti scsi_hostadapter "QLogic ISP1020 SCSI SBUS" sata_via scsi_hostadapter "VIA SATA controllers" sata_svw scsi_hostadapter "K2 SATA controllers" sata_promise scsi_hostadapter "Promise SATA controllers" siimage scsi_hostadapter "Silicon Image SATA controllers" # needed for sparc sym53c8xx scsi_hostadapter "Symbios 53C896" sym53c8xx_2 scsi_hostadapter "Alternate Symbios 53C896 Driver" # drivers/cdrom aztcd block-major-29 cdrom "Aztech CD268 CDROM" aztcd "Base I/O Address" cdu31a block-major-15 cdrom "Sony CDU-31A CDROM" cdu31a_port "Base I/O Address" cdu31a_irq "IRQ" cm206 block-major-32 cdrom "Philips/LMS cm20 CDROM" cm206 "Base I/O address, irq" gscd block-major-16 cdrom "GoldStar R420 CDROM" gscd "Base I/O Address" isp16 # module, but dynamic block number so kerneld can't request it... (?) unknown cdrom "ISP16/MAD16/Mozart soundcard-based CDROM" isp16_cdrom_base "Base I/O Address" isp16_cdrom_irq "IRQ" isp16_cdrom_dma "DMA Channel (0,3,5,6,7)" mcd block-major-23 cdrom "Mitsumi CDROM" mcd "Base I/O Address,irq" mcdx block-major-20 cdrom "Mitsumi XA/Multisession CDROM" mcdx "Base I/O Address,irq" optcd block-major-17 cdrom "Optics Storage 8000 AT CDROM" sbpcd block-major-25 cdrom "SoundBlaster Pro/Panasonic CDROM" sbpcd "Base I/O Address" sjcd block-major-18 cdrom "Sanyo CD-ROM device driver" sjcd_base "Base I/O Address" sonycd535 block-major-24 cdrom "Sony CDU-535 CDROM" sonycd535 "Base I/O Address" agpart video "Intel i810 Graphics Controller" # drivers/ieee1394 sbp2 scsi_hostadapter "IEEE-1394 SBP-2 protocol driver" # drivers/usb usb-storage scsi_hostadapter "USB Mass Storage driver for Linux" # pcmcia 3c574_cs eth "3Com 3c574 series PCMCIA ethernet driver" 3c589_cs eth "3Com 3c589 series PCMCIA ethernet driver" axnet_cs eth "Asix AX88190 PCMCIA ethernet driver" fmvj18x_cs eth "fmvj18x and compatible PCMCIA ethernet driver" nmclan_cs eth "New Media PCMCIA ethernet driver" pcnet_cs eth "NE2000 compatible PCMCIA ethernet driver" smc91c92_cs eth "SMC 91c92 series PCMCIA ethernet driver" xirc2ps_cs eth "Xircom PCMCIA ethernet driver" xircom_cb eth "Xircom Cardbus ethernet driver" aha152x_cs scsi_hostadapter "Adaptec AHA152x-compatible PCMCIA SCSI driver" fdomain_cs scsi_hostadapter "Future Domain PCMCIA SCSI driver" qlogic_cs scsi_hostadapter "Qlogic PCMCIA SCSI driver" ide-cs ide "PCMCIA IDE driver" # pcmcia host controllers yenta_socket pcmcia "Cardbus PCMCIA Controller" i82365 pcmcia "i82365 PCMCIA socket driver" tcic pcmcia "Databook TCIC-2 PCMCIA socket driver"