path: root/syslogd.c

/**
 * \brief This is the main file of the rsyslogd daemon.
 *
 * Please visit the rsyslog project at
 *
 * http://www.rsyslog.com
 *
 * to learn more about it and discuss any questions you may have.
 *
 * Please note that as of now, a lot of the code in this file stems
 * from the sysklogd project. To learn more over this project, please
 * visit
 *
 * http://www.infodrom.org/projects/sysklogd/
 *
 * I would like to express my thanks to the developers of the sysklogd
 * package - without it, I would have had a much harder start...
 *
 * Please note that I made quite some changes to the orignal package.
 * I expect to do even more changes - up
 * to a full rewrite - to meet my design goals, which among others
 * contain a (at least) dual-thread design with a memory buffer for
 * storing received bursts of data. This is also the reason why I 
 * kind of "forked" a completely new branch of the package. My intension
 * is to do many changes and only this initial release will look
 * similar to sysklogd (well, one never knows...).
 *
 * As I have made a lot of modifications, please assume that all bugs
 * in this package are mine and not those of the sysklogd team.
 *
 * As of this writing, there already exist heavy
 * modifications to the orginal sysklogd package. I suggest to no
 * longer rely too much on code knowledge you eventually have with
 * sysklogd - rgerhards 2005-07-05
 * The code is now almost completely different. Be careful!
 * rgerhards, 2006-11-30
 * 
 * I have decided to put my code under the GPL. The sysklog package
 * is distributed under the BSD license. As such, this package here
 * currently comes with two licenses. Both are given below. As it is
 * probably hard for you to see what was part of the sysklogd package
 * and what is part of my code, I suggest that you visit the 
 * sysklogd site on the URL above if you would like to base your
 * development on a version that is not under the GPL.
 *
 * This Project was intiated and is maintained by
 * Rainer Gerhards <rgerhards@hq.adiscon.com>. See
 * AUTHORS to learn who helped make it become a reality.
 *
 * If you have questions about rsyslogd in general, please email
 * info@adiscon.com. To learn more about rsyslogd, please visit
 * http://www.rsyslog.com.
 *
 * \author Rainer Gerhards <rgerhards@adiscon.com>
 * \date 2003-10-17
 *       Some initial modifications on the sysklogd package to support
 *       liblogging. These have actually not yet been merged to the
 *       source you see currently (but they hopefully will)
 *
 * \date 2004-10-28
 *       Restarted the modifications of sysklogd. This time, we
 *       focus on a simpler approach first. The initial goal is to
 *       provide MySQL database support (so that syslogd can log
 *       to the database).
 *
 * rsyslog - An Enhanced syslogd Replacement.
 * Copyright 2003-2007 Rainer Gerhards and Adiscon GmbH.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 *
 * A copy of the GPL can be found in the file "COPYING" in this distribution.
 */
#include "config.h"
#include "rsyslog.h"

#ifdef __FreeBSD__
#define	BSD
#endif

/* change the following setting to e.g. 32768 if you would like to
 * support large message sizes for IHE (32k is the current maximum
 * needed for IHE). I was initially tempted to increase it to 32k,
 * but there is a large memory footprint with the current
 * implementation in rsyslog. This will change as the processing
 * changes, but I have re-set it to 1k, because the vast majority
 * of messages is below that and the memory savings is huge, at
 * least compared to the overall memory footprint.
 *
 * If you intend to receive Windows Event Log data (e.g. via
 * EventReporter - www.eventreporter.com), you might want to 
 * increase this number to an even higher value, as event
 * log messages can be very lengthy.
 * rgerhards, 2005-07-05
 *
 * during my recent testing, it showed that 4k seems to be
 * the typical maximum for UDP based syslog. This is a IP stack
 * restriction. Not always ... but very often. If you go beyond
 * that value, be sure to test that rsyslogd actually does what
 * you think it should do ;) Also, it is a good idea to check the
 * doc set for anything on IHE - it most probably has information on
 * message sizes.
 * rgerhards, 2005-08-05
 * 
 * I have increased the default message size to 2048 to be in sync
 * with recent IETF syslog standardization efforts.
 * rgerhards, 2006-11-30
 *
 * I have removed syslogdPanic(). That function was supposed to be used
 * for logging in low-memory conditons. Ever since it was introduced, it
 * was a wrapper for dprintf(). A more intelligent choice was hard to
 * find. After all, if we are short on memory, doing anything fance will
 * again cause memory problems. I have now modified the code so that
 * those elements for which we do not get memory are simply discarded.
 * That might be a single property like the TAG, but it might also be
 * a complete message. The overall goal of this code change is to keep
 * rsyslogd up and running, while we sacrifice some messages to reach
 * that goal. It also keeps the code cleaner. A real out of memory
 * condition is highly unlikely. If it happens, there will probably be
 * much more trouble on the system in question. Anyhow - rsyslogd will
 * most probably be able to survive it and carry on with processing
 * once the situation has been resolved.
 */
#define DEFUPRI		(LOG_USER|LOG_NOTICE)
#define DEFSPRI		(LOG_KERN|LOG_CRIT)
#define TIMERINTVL	30		/* interval for checking flush, mark */

#define CONT_LINE	1		/* Allow continuation lines */

#ifdef MTRACE
#include <mcheck.h>
#endif
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#include <ctype.h>
#define GNU_SOURCE
#include <string.h>
#include <stdarg.h>
#include <time.h>
#include <pwd.h>
#include <grp.h>

#include <sys/syslog.h>
#include <sys/param.h>
#ifdef	__sun
#include <errno.h>
#else
#include <sys/errno.h>
#endif
#include <sys/ioctl.h>
#include <sys/wait.h>
#include <sys/socket.h>
#include <sys/file.h>
#include <sys/un.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <signal.h>

#include <netinet/in.h>
#include <netdb.h>
#include <fnmatch.h>

#ifndef __sun
#endif
#include <arpa/nameser.h>
#include <arpa/inet.h>
#include <resolv.h>
#include "pidfile.h"

#include <assert.h>

#ifdef USE_PTHREADS
#include <pthread.h>
#endif

#if	HAVE_PATHS_H
#include <paths.h>
#endif


/* handle some defines missing on more than one platform */
#ifndef SUN_LEN
#define SUN_LEN(su) \
   (sizeof(*(su)) - sizeof((su)->sun_path) + strlen((su)->sun_path))
#endif

#ifdef	WITH_DB
#include "mysql/mysql.h" 
#include "mysql/errmsg.h"
#endif

#include "srUtils.h"
#include "stringbuf.h"
#include "syslogd-types.h"
#include "template.h"
#include "outchannel.h"
#include "syslogd.h"
#include "net.h" /* struct NetAddr */

#include "parse.h"
#include "msg.h"
#include "modules.h"
#include "tcpsyslog.h"
#include "omshell.h"
#include "omusrmsg.h"
#include "ommysql.h"
#include "omfwd.h"
#include "omfile.h"
#include "omdiscard.h"

/* We define our own set of syslog defintions so that we
 * do not need to rely on (possibly different) implementations.
 * 2007-07-19 rgerhards
 */
/* missing definitions for solaris
 * 2006-02-16 Rger
 */
#ifdef __sun
#	define LOG_AUTHPRIV LOG_AUTH
#endif
#define	LOG_MAKEPRI(fac, pri)	(((fac) << 3) | (pri))
#define	LOG_PRI(p)	((p) & LOG_PRIMASK)
#define	LOG_FAC(p)	(((p) & LOG_FACMASK) >> 3)
#define INTERNAL_NOPRI  0x10    /* the "no priority" priority */
#define LOG_FTP         (11<<3) /* ftp daemon */
#define INTERNAL_MARK   LOG_MAKEPRI((LOG_NFACILITIES<<3), 0)

syslogCODE rs_prioritynames[] =
  {
    { "alert", LOG_ALERT },
    { "crit", LOG_CRIT },
    { "debug", LOG_DEBUG },
    { "emerg", LOG_EMERG },
    { "err", LOG_ERR },
    { "error", LOG_ERR },               /* DEPRECATED */
    { "info", LOG_INFO },
    { "none", INTERNAL_NOPRI },         /* INTERNAL */
    { "notice", LOG_NOTICE },
    { "panic", LOG_EMERG },             /* DEPRECATED */
    { "warn", LOG_WARNING },            /* DEPRECATED */
    { "warning", LOG_WARNING },
    { NULL, -1 }
  };

syslogCODE rs_facilitynames[] =
  {
    { "auth", LOG_AUTH },
    { "authpriv", LOG_AUTHPRIV },
    { "cron", LOG_CRON },
    { "daemon", LOG_DAEMON },
    { "ftp", LOG_FTP },
    { "kern", LOG_KERN },
    { "lpr", LOG_LPR },
    { "mail", LOG_MAIL },
    { "mark", INTERNAL_MARK },          /* INTERNAL */
    { "news", LOG_NEWS },
    { "security", LOG_AUTH },           /* DEPRECATED */
    { "syslog", LOG_SYSLOG },
    { "user", LOG_USER },
    { "uucp", LOG_UUCP },
    { "local0", LOG_LOCAL0 },
    { "local1", LOG_LOCAL1 },
    { "local2", LOG_LOCAL2 },
    { "local3", LOG_LOCAL3 },
    { "local4", LOG_LOCAL4 },
    { "local5", LOG_LOCAL5 },
    { "local6", LOG_LOCAL6 },
    { "local7", LOG_LOCAL7 },
    { NULL, -1 }
  };


#ifndef UTMP_FILE
#ifdef UTMP_FILENAME
#define UTMP_FILE UTMP_FILENAME
#else
#ifdef _PATH_UTMP
#define UTMP_FILE _PATH_UTMP
#else
#define UTMP_FILE "/etc/utmp"
#endif
#endif
#endif

#ifndef _PATH_LOGCONF 
#define _PATH_LOGCONF	"/etc/rsyslog.conf"
#endif

#if defined(SYSLOGD_PIDNAME)
#undef _PATH_LOGPID
#if defined(FSSTND)
#ifdef BSD
#define _PATH_VARRUN "/var/run/"
#endif
#ifdef __sun
#define _PATH_VARRUN "/var/run/"
#endif
#define _PATH_LOGPID _PATH_VARRUN SYSLOGD_PIDNAME
#else
#define _PATH_LOGPID "/etc/" SYSLOGD_PIDNAME
#endif
#else
#ifndef _PATH_LOGPID
#if defined(FSSTND)
#define _PATH_LOGPID _PATH_VARRUN "rsyslogd.pid"
#else
#define _PATH_LOGPID "/etc/rsyslogd.pid"
#endif
#endif
#endif

#ifndef _PATH_DEV
#define _PATH_DEV	"/dev/"
#endif

#ifndef _PATH_CONSOLE
#define _PATH_CONSOLE	"/dev/console"
#endif

#ifndef _PATH_TTY
#define _PATH_TTY	"/dev/tty"
#endif

#ifndef _PATH_LOG
#ifdef BSD
#define _PATH_LOG	"/var/run/log"
#else
#define _PATH_LOG	"/dev/log"
#endif
#endif


/* IPv6 compatibility layer for older platforms
 * We need to handle a few things different if we are running
 * on an older platform which does not support all the glory
 * of IPv6. We try to limit toll on features and reliability,
 * but obviously it is better to run rsyslog on a platform that
 * supports everything...
 * rgerhards, 2007-06-22
 */
#ifndef AI_NUMERICSERV
#  define AI_NUMERICSERV 0
#endif


static char	*ConfFile = _PATH_LOGCONF; /* read-only after startup */
static char	*PidFile = _PATH_LOGPID; /* read-only after startup */
char	ctty[] = _PATH_CONSOLE;	/* this is read-only */

int bModMySQLLoaded = 0; /* was a $ModLoad MySQL done? */
static pid_t myPid;	/* our pid for use in self-generated messages, e.g. on startup */
/* mypid is read-only after the initial fork() */
static int debugging_on = 0; /* read-only, except on sig USR1 */
static int restart = 0; /* do restart (config read) - multithread safe */

static int bRequestDoMark = 0; /* do mark processing? (multithread safe) */
#define MAXFUNIX	20

int glblHadMemShortage = 0; /* indicates if we had memory shortage some time during the run */
int iDynaFileCacheSize = 10; /* max cache for dynamic files */
int fCreateMode = 0644; /* mode to use when creating files */
int fDirCreateMode = 0644; /* mode to use when creating files */
int nfunix = 1; /* number of Unix sockets open / read-only after startup */
int startIndexUxLocalSockets = 0; /* process funix from that index on (used to 
 				   * suppress local logging. rgerhards 2005-08-01
				   * read-only after startup
				   */
int funixParseHost[MAXFUNIX] = { 0, }; /* should parser parse host name?  read-only after startup */
char *funixn[MAXFUNIX] = { _PATH_LOG }; /* read-only after startup */
int funix[MAXFUNIX] = { -1, }; /* read-only after startup */

#define INTERNAL_NOPRI	0x10	/* the "no priority" priority */
#define TABLE_NOPRI	0	/* Value to indicate no priority in f_pmask */
#define TABLE_ALLPRI    0xFF    /* Value to indicate all priorities in f_pmask */
#define	LOG_MARK	LOG_MAKEPRI(LOG_NFACILITIES, 0)	/* mark "facility" */

/* This table lists the directive lines:
 */
static const char *directive_name_list[] = {
	"template",
	"outchannel",
	"allowedsender",
	"filecreatemode",
	"umask",
	"dynafilecachesize"
};
/* ... and their definitions: */
enum eDirective { DIR_TEMPLATE = 0, DIR_OUTCHANNEL = 1,
                  DIR_ALLOWEDSENDER = 2, DIR_FILECREATEMODE = 3,
		  DIR_DIRCREATEMODE = 4,
		  DIR_UMASK = 5, DIR_DYNAFILECACHESIZE = 6};

/* The following global variables are used for building
 * tag and host selector lines during startup and config reload.
 * This is stored as a global variable pool because of its ease. It is
 * also fairly compatible with multi-threading as the stratup code must
 * be run in a single thread anyways. So there can be no race conditions. These
 * variables are no longer used once the configuration has been loaded (except,
 * of course, during a reload). rgerhards 2005-10-18
 */
static EHostnameCmpMode eDfltHostnameCmpMode;
static rsCStrObj *pDfltHostnameCmp;
static rsCStrObj *pDfltProgNameCmp;

/* supporting structures for multithreading */
#ifdef USE_PTHREADS
/* this is the first approach to a queue, this time with static
 * memory.
 */
#define QUEUESIZE 10000
typedef struct {
	void* buf[QUEUESIZE];
	long head, tail;
	int full, empty;
	pthread_mutex_t *mut;
	pthread_cond_t *notFull, *notEmpty;
} msgQueue;

int bRunningMultithreaded = 0;	/* Is this program running in multithreaded mode? */
msgQueue *pMsgQueue = NULL;
static pthread_t thrdWorker;
static int bGlblDone = 0;
#endif
/* END supporting structures for multithreading */

static int bParseHOSTNAMEandTAG = 1; /* global config var: should the hostname and tag be
                                      * parsed inside message - rgerhards, 2006-03-13 */
static int bFinished = 0;	/* used by termination signal handler, read-only except there
				 * is either 0 or the number of the signal that requested the
 				 * termination.
				 */

/*
 * Intervals at which we flush out "message repeated" messages,
 * in seconds after previous message is logged.  After each flush,
 * we move to the next interval until we reach the largest.
 */
int	repeatinterval[] = { 30, 60 };	/* # of secs before flush */
#define	MAXREPEAT ((int)((sizeof(repeatinterval) / sizeof(repeatinterval[0])) - 1))
#define	REPEATTIME(f)	((f)->f_time + repeatinterval[(f)->f_repeatcount])
#define	BACKOFF(f)	{ if (++(f)->f_repeatcount > MAXREPEAT) \
				 (f)->f_repeatcount = MAXREPEAT; \
			}
#ifdef SYSLOG_INET
union sockunion {
	struct sockinet {
		u_char si_len;
		u_char si_family;
		} su_si;
	struct sockaddr_in  su_sin;
	struct sockaddr_in6 su_sin6;
};
#endif

#define LIST_DELIMITER	':'		/* delimiter between two hosts */

struct	filed *Files = NULL; /* read-only after init() (but beware of sigusr1!) */
struct	filed consfile; /* initialized on startup, used during actions - maybe NON THREAD-SAFE */
struct 	filed emergfile; /* this is only used for emergency logging when
			  * no actual config has been loaded.
			  * useded during actions in emergencase - thread-safety doubtful
			  */

struct code {
	char	*c_name;
	int	c_val;
};

static struct code	PriNames[] = {
	{"alert",	LOG_ALERT},
	{"crit",	LOG_CRIT},
	{"debug",	LOG_DEBUG},
	{"emerg",	LOG_EMERG},
	{"err",		LOG_ERR},
	{"error",	LOG_ERR},		/* DEPRECATED */
	{"info",	LOG_INFO},
	{"none",	INTERNAL_NOPRI},	/* INTERNAL */
	{"notice",	LOG_NOTICE},
	{"panic",	LOG_EMERG},		/* DEPRECATED */
	{"warn",	LOG_WARNING},		/* DEPRECATED */
	{"warning",	LOG_WARNING},
	{"*",		TABLE_ALLPRI},
	{NULL,		-1}
};

static struct code	FacNames[] = {
	{"auth",         LOG_AUTH},
	{"authpriv",     LOG_AUTHPRIV},
	{"cron",         LOG_CRON},
	{"daemon",       LOG_DAEMON},
	{"kern",         LOG_KERN},
	{"lpr",          LOG_LPR},
	{"mail",         LOG_MAIL},
	{"mark",         LOG_MARK},		/* INTERNAL */
	{"news",         LOG_NEWS},
	{"security",     LOG_AUTH},		/* DEPRECATED */
	{"syslog",       LOG_SYSLOG},
	{"user",         LOG_USER},
	{"uucp",         LOG_UUCP},
#if defined(LOG_FTP)
	{"ftp",          LOG_FTP},
#endif
	{"local0",       LOG_LOCAL0},
	{"local1",       LOG_LOCAL1},
	{"local2",       LOG_LOCAL2},
	{"local3",       LOG_LOCAL3},
	{"local4",       LOG_LOCAL4},
	{"local5",       LOG_LOCAL5},
	{"local6",       LOG_LOCAL6},
	{"local7",       LOG_LOCAL7},
	{NULL,           -1},
};

/* global variables for config file state */
static int	bDropTrailingLF = 1; /* drop trailing LF's on reception? */
int	Debug;		/* debug flag  - read-only after startup */
int	bFailOnChown;	/* fail if chown fails? */
uid_t	fileUID;	/* UID to be used for newly created files */
uid_t	fileGID;	/* GID to be used for newly created files */
uid_t	dirUID;		/* UID to be used for newly created directories */
uid_t	dirGID;		/* GID to be used for newly created directories */
int	bCreateDirs;	/* auto-create directories for dynaFiles: 0 - no, 1 - yes */
static int	bDebugPrintTemplateList;/* output template list in debug mode? */
int	bDropMalPTRMsgs = 0;/* Drop messages which have malicious PTR records during DNS lookup */
static uchar	cCCEscapeChar = '\\';/* character to be used to start an escape sequence for control chars */
static int 	bEscapeCCOnRcv; /* escape control characters on reception: 0 - no, 1 - yes */
static int 	bReduceRepeatMsgs; /* reduce repeated message - 0 - no, 1 - yes */
static int	logEveryMsg = 0;/* no repeat message processing  - read-only after startup
				 * 0 - suppress duplicate messages
				 * 1 - do NOT suppress duplicate messages
				 */
/* end global config file state variables */

char	LocalHostName[MAXHOSTNAMELEN+1];/* our hostname  - read-only after startup */
char	*LocalDomain;	/* our local domain name  - read-only after startup */
int	*finet = NULL;	/* Internet datagram sockets, first element is nbr of elements
				 * read-only after init(), but beware of restart! */
static char     *LogPort = "514";    /* port number for INET connections */
static int	MarkInterval = 5;//20 * 60;	/* interval between marks in seconds - read-only after startup */
int      family = PF_UNSPEC;     /* protocol family (IPv4, IPv6 or both), set via cmdline */
int      send_to_all = 0;        /* send message to all IPv4/IPv6 addresses */
static int	MarkSeq = 0;	/* mark sequence number - modified in domark() only */
static int	NoFork = 0; 	/* don't fork - don't run in daemon mode - read-only after startup */
static int	AcceptRemote = 0;/* receive messages that come via UDP - read-only after startup */
int	DisableDNS = 0; /* don't look up IP addresses of remote messages */
char	**StripDomains = NULL;/* these domains may be stripped before writing logs  - r/o after s.u.*/
char	**LocalHosts = NULL;/* these hosts are logged with their hostname  - read-only after startup*/
int	NoHops = 1;	/* Can we bounce syslog messages through an
				   intermediate host.  Read-only after startup */
static int     Initialized = 0; /* set when we have initialized ourselves
                                 * rgerhards 2004-11-09: and by initialized, we mean that
                                 * the configuration file could be properly read AND the
                                 * syslog/udp port could be obtained (the later is debatable).
                                 * It is mainly a setting used for emergency logging: if
                                 * something really goes wild, we can not do as indicated in
                                 * the log file, but we still log messages to the system
                                 * console. This is probably the best that can be done in
                                 * such a case.
				 * read-only after startup, but modified during restart
                                 */

extern	int errno;

/* support for simple textual representatio of FIOP names
 * rgerhards, 2005-09-27
 */
static char* getFIOPName(unsigned iFIOP)
{
	char *pRet;
	switch(iFIOP) {
		case FIOP_CONTAINS:
			pRet = "contains";
			break;
		case FIOP_ISEQUAL:
			pRet = "isequal";
			break;
		case FIOP_STARTSWITH:
			pRet = "startswith";
			break;
		case FIOP_REGEX:
			pRet = "regex";
			break;
		default:
			pRet = "NOP";
			break;
	}
	return pRet;
}


/* Reset config variables to default values.
 * rgerhards, 2007-07-17
 */
static void resetConfigVariables(void)
{
	fileUID = -1;
	fileGID = -1;
	dirUID = -1;
	dirGID = -1;
	bFailOnChown = 1;
	iDynaFileCacheSize = 10;
	fCreateMode = 0644;
	fDirCreateMode = 0644;
	cCCEscapeChar = '#';
	bCreateDirs = 1;
	bDebugPrintTemplateList = 1;
	bEscapeCCOnRcv = 1; /* default is to escape control characters */
	bReduceRepeatMsgs = (logEveryMsg == 1) ? 0 : 1;

}


/* support for defining allowed TCP and UDP senders. We use the same
 * structure to implement this (a linked list), but we define two different
 * list roots, one for UDP and one for TCP.
 * rgerhards, 2005-09-26
 */
#ifdef SYSLOG_INET
/* All of the five below are read-only after startup */
static struct AllowedSenders *pAllowedSenders_UDP = NULL; /* the roots of the allowed sender */
struct AllowedSenders *pAllowedSenders_TCP = NULL; /* lists. If NULL, all senders are ok! */
static struct AllowedSenders *pLastAllowedSenders_UDP = NULL; /* and now the pointers to the last */
static struct AllowedSenders *pLastAllowedSenders_TCP = NULL; /* element in the respective list */
#endif /* #ifdef SYSLOG_INET */

int option_DisallowWarning = 1;	/* complain if message from disallowed sender is received */


/* hardcoded standard templates (used for defaults) */
static uchar template_TraditionalFormat[] = "\"%TIMESTAMP% %HOSTNAME% %syslogtag%%msg:::drop-last-lf%\n\"";
static uchar template_WallFmt[] = "\"\r\n\7Message from syslogd@%HOSTNAME% at %timegenerated% ...\r\n %syslogtag%%msg%\n\r\"";
static uchar template_StdFwdFmt[] = "\"<%PRI%>%TIMESTAMP% %HOSTNAME% %syslogtag%%msg%\"";
static uchar template_StdUsrMsgFmt[] = "\" %syslogtag%%msg%\n\r\"";
static uchar template_StdDBFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-mysql%', '%timegenerated:::date-mysql%', %iut%, '%syslogtag%')\",SQL";
/* end template */


/* up to the next comment, prototypes that should be removed by reordering */
#ifdef USE_PTHREADS
static msgQueue *queueInit (void);
static void *singleWorker(); /* REMOVEME later 2005-10-24 */
#endif
/* Function prototypes. */
static char **crunch_list(char *list);
static void printline(char *hname, char *msg, int iSource);
static void logmsg(int pri, msg_t*, int flags);
static rsRetVal fprintlog(register selector_t *f);
static void reapchild();
static void debug_switch();
static rsRetVal cfline(char *line, register selector_t *f);
static int decode(uchar *name, struct code *codetab);
static void sighup_handler();
static void die(int sig);
static void freeSelectors(void);

/* Access functions for the selector_t. These functions are primarily
 * necessary to make things thread-safe. Consequently, they are slim
 * if we compile without pthread support.
 * rgerhards 2005-10-24
 */

/* END Access functions for the selector_t */

/* Code for handling allowed/disallowed senders
 */
#ifdef SYSLOG_INET
static inline void MaskIP6 (struct in6_addr *addr, uint8_t bits) {
	register uint8_t i;
	
	assert (addr != NULL);
	assert (bits <= 128);
	
	i = bits/32;
	if (bits%32)
		addr->s6_addr32[i++] &= htonl(0xffffffff << (32 - (bits % 32)));
	for (; i < (sizeof addr->s6_addr32)/4; i++)
		addr->s6_addr32[i] = 0;
}

static inline void MaskIP4 (struct in_addr  *addr, uint8_t bits) {
	
	assert (addr != NULL);
	assert (bits <=32 );
	
	addr->s_addr &= htonl(0xffffffff << (32 - bits));
}

#define SIN(sa)  ((struct sockaddr_in  *)(sa))
#define SIN6(sa) ((struct sockaddr_in6 *)(sa))

/* This function adds an allowed sender entry to the ACL linked list.
 * In any case, a single entry is added. If an error occurs, the
 * function does its error reporting itself. All validity checks
 * must already have been done by the caller.
 * This is a helper to AddAllowedSender().
 * rgerhards, 2007-07-17
 */
static rsRetVal AddAllowedSenderEntry(struct AllowedSenders **ppRoot, struct AllowedSenders **ppLast,
		     		      struct NetAddr *iAllow, uint8_t iSignificantBits)
{
	struct AllowedSenders *pEntry = NULL;

	assert(ppRoot != NULL);
	assert(ppLast != NULL);
	assert(iAllow != NULL);

	if((pEntry = (struct AllowedSenders*) calloc(1, sizeof(struct AllowedSenders))) == NULL) {
		glblHadMemShortage = 1;
		return RS_RET_OUT_OF_MEMORY; /* no options left :( */
	}
	
	memcpy(&(pEntry->allowedSender), iAllow, sizeof (struct NetAddr));
	pEntry->pNext = NULL;
	pEntry->SignificantBits = iSignificantBits;
	
	/* enqueue */
	if(*ppRoot == NULL) {
		*ppRoot = pEntry;
	} else {
		(*ppLast)->pNext = pEntry;
	}
	*ppLast = pEntry;
	
	return RS_RET_OK;
}

/* function to clear the allowed sender structure in cases where
 * it must be freed (occurs most often when HUPed.
 * TODO: reconsider recursive implementation
 */
static void clearAllowedSenders (struct AllowedSenders *pAllow) {
	if (pAllow != NULL) {
		if (pAllow->pNext != NULL)
			clearAllowedSenders (pAllow->pNext);
		else {
			if (F_ISSET(pAllow->allowedSender.flags, ADDR_NAME))
				free (pAllow->allowedSender.addr.HostWildcard);
			else
				free (pAllow->allowedSender.addr.NetAddr);
			
			free (pAllow);
		}
	}
}

/* function to add an allowed sender to the allowed sender list. The
 * root of the list is caller-provided, so it can be used for all
 * supported lists. The caller must provide a pointer to the root,
 * as it eventually needs to be updated. Also, a pointer to the
 * pointer to the last element must be provided (to speed up adding
 * list elements).
 * rgerhards, 2005-09-26
 * If a hostname is given there are possible multiple entries
 * added (all addresses from that host).
 */
static rsRetVal AddAllowedSender(struct AllowedSenders **ppRoot, struct AllowedSenders **ppLast,
		     		 struct NetAddr *iAllow, uint8_t iSignificantBits)
{
	rsRetVal iRet = RS_RET_OK;

	assert(ppRoot != NULL);
	assert(ppLast != NULL);
	assert(iAllow != NULL);

	if (!F_ISSET(iAllow->flags, ADDR_NAME)) {
		if(iSignificantBits == 0)
			/* we handle this seperatly just to provide a better
			 * error message.
			 */
			logerror("You can not specify 0 bits of the netmask, this would "
				 "match ALL systems. If you really intend to do that, "
				 "remove all $AllowedSender directives.");
		
		switch (iAllow->addr.NetAddr->sa_family) {
		case AF_INET:
			if((iSignificantBits < 1) || (iSignificantBits > 32)) {
				logerrorInt("Invalid bit number in IPv4 address - adjusted to 32",
					    (int)iSignificantBits);
				iSignificantBits = 32;
			}
			
			MaskIP4 (&(SIN(iAllow->addr.NetAddr)->sin_addr), iSignificantBits);
			break;
		case AF_INET6:
			if((iSignificantBits < 1) || (iSignificantBits > 128)) {
				logerrorInt("Invalid bit number in IPv6 address - adjusted to 128",
					    iSignificantBits);
				iSignificantBits = 128;
			}

			MaskIP6 (&(SIN6(iAllow->addr.NetAddr)->sin6_addr), iSignificantBits);
			break;
		default:
			/* rgerhards, 2007-07-16: We have an internal program error in this
			 * case. However, there is not much we can do against it right now. Of
			 * course, we could abort, but that would probably cause more harm
			 * than good. So we continue to run. We simply do not add this line - the
			 * worst thing that happens is that one host will not be allowed to
			 * log.
			 */
			logerrorInt("Internal error caused AllowedSender to be ignored, AF = %d",
				    iAllow->addr.NetAddr->sa_family);
			return RS_RET_ERR;
		}
		/* OK, entry constructed, now lets add it to the ACL list */
		iRet = AddAllowedSenderEntry(ppRoot, ppLast, iAllow, iSignificantBits);
	} else {
		/* we need to process a hostname ACL */
		if (DisableDNS) {
			logerror ("Ignoring hostname based ACLs because DNS is disabled.");
			return RS_RET_OK;
		}
		
		if (!strchr (iAllow->addr.HostWildcard, '*') &&
		    !strchr (iAllow->addr.HostWildcard, '?')) {
			/* single host - in this case, we pull its IP addresses from DNS
			* and add IP-based ACLs.
			*/
			struct addrinfo hints, *res, *restmp;
			struct NetAddr allowIP;
			
			memset (&hints, 0, sizeof (struct addrinfo));
			hints.ai_family = AF_UNSPEC;
			hints.ai_flags  = AI_ADDRCONFIG;
			hints.ai_socktype = SOCK_DGRAM;

			if (getaddrinfo (iAllow->addr.HostWildcard, NULL, &hints, &res) != 0) {
				logerrorSz("DNS error: Can't resolve \"%s\", not added as allowed sender", iAllow->addr.HostWildcard);
				/* We could use the text name in this case - maybe this could become
				 * a user-defined option at some stage.
				 */
				return RS_RET_ERR;
			}
			
			for (restmp = res ; res != NULL ; res = res->ai_next) {
				switch (res->ai_family) {
				case AF_INET: /* add IPv4 */
					iSignificantBits = 32;
					allowIP.flags = 0;
					if((allowIP.addr.NetAddr = malloc(res->ai_addrlen)) == NULL) {
						glblHadMemShortage = 1;
						return RS_RET_OUT_OF_MEMORY;
					}
					memcpy(allowIP.addr.NetAddr, res->ai_addr, res->ai_addrlen);
					
					if((iRet = AddAllowedSenderEntry(ppRoot, ppLast, &allowIP, iSignificantBits))
						!= RS_RET_OK)
						return(iRet);
					break;
				case AF_INET6: /* IPv6 - but need to check if it is a v6-mapped IPv4 */
					if(IN6_IS_ADDR_V4MAPPED (&SIN6(res->ai_addr)->sin6_addr)) {
						/* extract & add IPv4 */
						
						iSignificantBits = 32;
						allowIP.flags = 0;
						if((allowIP.addr.NetAddr = malloc(sizeof(struct sockaddr_in)))
						    == NULL) {
							glblHadMemShortage = 1;
							return RS_RET_OUT_OF_MEMORY;
						}
						SIN(allowIP.addr.NetAddr)->sin_family = AF_INET;
#ifdef HAVE_STRUCT_SOCKADDR_SA_LEN    
                                                SIN(allowIP.addr.NetAddr)->sin_len    = sizeof (struct sockaddr_in);
#endif
						SIN(allowIP.addr.NetAddr)->sin_port   = 0;
						memcpy(&(SIN(allowIP.addr.NetAddr)->sin_addr.s_addr),
							&(SIN6(res->ai_addr)->sin6_addr.s6_addr32[3]),
							sizeof (struct sockaddr_in));

						if((iRet = AddAllowedSenderEntry(ppRoot, ppLast, &allowIP,
								iSignificantBits))
							!= RS_RET_OK)
							return(iRet);
					} else {
						/* finally add IPv6 */
						
						iSignificantBits = 128;
						allowIP.flags = 0;
						if((allowIP.addr.NetAddr = malloc(res->ai_addrlen)) == NULL) {
							glblHadMemShortage = 1;
							return RS_RET_OUT_OF_MEMORY;
						}
						memcpy(allowIP.addr.NetAddr, res->ai_addr, res->ai_addrlen);
						
						if((iRet = AddAllowedSenderEntry(ppRoot, ppLast, &allowIP,
								iSignificantBits))
							!= RS_RET_OK)
							return(iRet);
					}
					break;
				}
			}
			freeaddrinfo (restmp);
		} else {
			/* wildcards in hostname - we need to add a text-based ACL.
			 * For this, we already have everything ready and just need
			 * to pass it along...
			 */
			iRet =  AddAllowedSenderEntry(ppRoot, ppLast, iAllow, iSignificantBits);
		}
	}

	return iRet;
}
#endif /* #ifdef SYSLOG_INET */


#ifdef SYSLOG_INET
/* Print an allowed sender list. The caller must tell us which one.
 * iListToPrint = 1 means UDP, 2 means TCP
 * rgerhards, 2005-09-27
 */

static void PrintAllowedSenders(int iListToPrint)
{
	struct AllowedSenders *pSender;
	uchar szIP[64];
	
	assert((iListToPrint == 1) || (iListToPrint == 2));

	printf("\nAllowed %s Senders:\n",
	       (iListToPrint == 1) ? "UDP" : "TCP");
	pSender = (iListToPrint == 1) ?
		  pAllowedSenders_UDP : pAllowedSenders_TCP;
	if(pSender == NULL) {
		printf("\tNo restrictions set.\n");
	} else {
		while(pSender != NULL) {
			if (F_ISSET(pSender->allowedSender.flags, ADDR_NAME))
				printf ("\t%s\n", pSender->allowedSender.addr.HostWildcard);
			else {
				if(getnameinfo (pSender->allowedSender.addr.NetAddr,
						     SALEN(pSender->allowedSender.addr.NetAddr),
						     (char*)szIP, 64, NULL, 0, NI_NUMERICHOST) == 0) {
					printf ("\t%s/%u\n", szIP, pSender->SignificantBits);
				} else {
					/* getnameinfo() failed - but as this is only a
					 * debug function, we simply spit out an error and do
					 * not care much about it.
					 */
					dprintf("\tERROR in getnameinfo() - something may be wrong "
						"- ignored for now\n");
				}
			}
			pSender = pSender->pNext;
		}
	}
}


/* compares a host to an allowed sender list entry. Handles all subleties
 * including IPv4/v6 as well as domain name wildcards.
 * This is a helper to isAllowedSender. As it is only called once, it is
 * declared inline.
 * Returns 0 if they do not match, something else otherwise.
 * contributed 1007-07-16 by mildew@gmail.com
 */
static inline int MaskCmp(struct NetAddr *pAllow, uint8_t bits, struct sockaddr *pFrom, const char *pszFromHost)
{
	assert(pAllow != NULL);
	assert(pFrom != NULL);

	if(F_ISSET(pAllow->flags, ADDR_NAME)) {
		dprintf ("MaskCmp: host=\"%s\"; pattern=\"%s\"\n", pszFromHost, pAllow->addr.HostWildcard);
		
		return(fnmatch(pAllow->addr.HostWildcard, pszFromHost, FNM_NOESCAPE|FNM_CASEFOLD) == 0);
	} else {/* We need to compare an IP address */
		switch (pFrom->sa_family) {
		case AF_INET:
			if (AF_INET == pAllow->addr.NetAddr->sa_family)
				return(( SIN(pFrom)->sin_addr.s_addr & htonl(0xffffffff << (32 - bits)) )
				       == SIN(pAllow->addr.NetAddr)->sin_addr.s_addr);
			else
				return 0;
			break;
		case AF_INET6:
			switch (pAllow->addr.NetAddr->sa_family) {
			case AF_INET6: {
				struct in6_addr ip, net;
				register uint8_t i;
				
				memcpy (&ip,  &(SIN6(pFrom))->sin6_addr, sizeof (struct in6_addr));
				memcpy (&net, &(SIN6(pAllow->addr.NetAddr))->sin6_addr, sizeof (struct in6_addr));
				
				i = bits/32;
				if (bits % 32)
					ip.s6_addr32[i++] &= htonl(0xffffffff << (32 - (bits % 32)));
				for (; i < (sizeof ip.s6_addr32)/4; i++)
					ip.s6_addr32[i] = 0;
				
				return (memcmp (ip.s6_addr, net.s6_addr, sizeof ip.s6_addr) == 0 &&
					(SIN6(pAllow->addr.NetAddr)->sin6_scope_id != 0 ?
					 SIN6(pFrom)->sin6_scope_id == SIN6(pAllow->addr.NetAddr)->sin6_scope_id : 1));
			}
			case AF_INET: {
				struct in6_addr *ip6 = &(SIN6(pFrom))->sin6_addr;
				struct in_addr  *net = &(SIN(pAllow->addr.NetAddr))->sin_addr;
				
				if ((ip6->s6_addr32[3] & (u_int32_t) htonl((0xffffffff << (32 - bits)))) == net->s_addr &&
#if BYTE_ORDER == LITTLE_ENDIAN
				    (ip6->s6_addr32[2] == (u_int32_t)0xffff0000) &&
#else
				    (ip6->s6_addr32[2] == (u_int32_t)0x0000ffff) &&
#endif
				    (ip6->s6_addr32[1] == 0) && (ip6->s6_addr32[0] == 0))
					return 1;
				else
					return 0;
			}
			default:
				/* Unsupported AF */
				return 0;
			}
		default:
			/* Unsupported AF */
			return 0;
		}
	}
}


/* check if a sender is allowed. The root of the the allowed sender.
 * list must be proveded by the caller. As such, this function can be
 * used to check both UDP and TCP allowed sender lists.
 * returns 1, if the sender is allowed, 0 otherwise.
 * rgerhards, 2005-09-26
 */
int isAllowedSender(struct AllowedSenders *pAllowRoot, struct sockaddr *pFrom, const char *pszFromHost)
{
	struct AllowedSenders *pAllow;
	
	assert(pFrom != NULL);

	if(pAllowRoot == NULL)
		return 1; /* checking disabled, everything is valid! */
	
	/* now we loop through the list of allowed senders. As soon as
	 * we find a match, we return back (indicating allowed). We loop
	 * until we are out of allowed senders. If so, we fall through the
	 * loop and the function's terminal return statement will indicate
	 * that the sender is disallowed.
	 */
	for(pAllow = pAllowRoot ; pAllow != NULL ; pAllow = pAllow->pNext) {
		if (MaskCmp (&(pAllow->allowedSender), pAllow->SignificantBits, pFrom, pszFromHost))
			return 1;
	}
	dprintf("%s is not an allowed sender\n", pszFromHost);
	return 0;
}
#endif /* #ifdef SYSLOG_INET */


/* code to free all sockets within a socket table.
 * A socket table is a descriptor table where the zero
 * element has the count of elements. This is used for
 * listening sockets. The socket table itself is also
 * freed.
 * A POINTER to this structure must be provided, thus
 * double indirection!
 * rgerhards, 2007-06-28
 */
void freeAllSockets(int **socks)
{
	assert(socks != NULL);
	assert(*socks != NULL);
	while(**socks) {
		dprintf("Closing socket %d.\n", (*socks)[**socks]);
		close((*socks)[**socks]);
		(**socks)--;
	}
	free(*socks);
	socks = NULL;
}


/* get the syslog forward port from selector_t. The passed in
 * struct must be one that is setup for forwarding.
 * rgerhards, 2007-06-28
 * We may change the implementation to try to lookup the port
 * if it is unspecified. So far, we use the IANA default auf 514.
 */
char *getFwdSyslogPt(selector_t *f)
{
	assert(f != NULL);
	if(f->f_un.f_forw.port == NULL)
		return("514");
	else
		return(f->f_un.f_forw.port);
}


/*******************************************************************
 * BEGIN CODE-LIBLOGGING                                           *
 *******************************************************************
 * Code in this section is borrowed from liblogging. This is an
 * interim solution. Once liblogging is fully integrated, this is
 * to be removed (see http://www.monitorware.com/liblogging for
 * more details. 2004-11-16 rgerhards
 *
 * Please note that the orginal liblogging code is modified so that
 * it fits into the context of the current version of syslogd.c.
 *
 * DO NOT PUT ANY OTHER CODE IN THIS BEGIN ... END BLOCK!!!!
 */

/**
 * Parse a 32 bit integer number from a string.
 *
 * \param ppsz Pointer to the Pointer to the string being parsed. It
 *             must be positioned at the first digit. Will be updated 
 *             so that on return it points to the first character AFTER
 *             the integer parsed.
 * \retval The number parsed.
 */

static int srSLMGParseInt32(char** ppsz)
{
	int i;

	i = 0;
	while(isdigit((int) **ppsz))
	{
		i = i * 10 + **ppsz - '0';
		++(*ppsz);
	}

	return i;
}


/**
 * Parse a TIMESTAMP-3339.
 * updates the parse pointer position.
 */
static int srSLMGParseTIMESTAMP3339(struct syslogTime *pTime, char** ppszTS)
{
	char *pszTS = *ppszTS;

	assert(pTime != NULL);
	assert(ppszTS != NULL);
	assert(pszTS != NULL);

	pTime->year = srSLMGParseInt32(&pszTS);

	/* We take the liberty to accept slightly malformed timestamps e.g. in 
	 * the format of 2003-9-1T1:0:0. This doesn't hurt on receiving. Of course,
	 * with the current state of affairs, we would never run into this code
	 * here because at postion 11, there is no "T" in such cases ;)
	 */
	if(*pszTS++ != '-')
		return FALSE;
	pTime->month = srSLMGParseInt32(&pszTS);
	if(pTime->month < 1 || pTime->month > 12)
		return FALSE;

	if(*pszTS++ != '-')
		return FALSE;
	pTime->day = srSLMGParseInt32(&pszTS);
	if(pTime->day < 1 || pTime->day > 31)
		return FALSE;

	if(*pszTS++ != 'T')
		return FALSE;

	pTime->hour = srSLMGParseInt32(&pszTS);
	if(pTime->hour < 0 || pTime->hour > 23)
		return FALSE;

	if(*pszTS++ != ':')
		return FALSE;
	pTime->minute = srSLMGParseInt32(&pszTS);
	if(pTime->minute < 0 || pTime->minute > 59)
		return FALSE;

	if(*pszTS++ != ':')
		return FALSE;
	pTime->second = srSLMGParseInt32(&pszTS);
	if(pTime->second < 0 || pTime->second > 60)
		return FALSE;

	/* Now let's see if we have secfrac */
	if(*pszTS == '.')
	{
		char *pszStart = ++pszTS;
		pTime->secfrac = srSLMGParseInt32(&pszTS);
		pTime->secfracPrecision = (int) (pszTS - pszStart);
	}
	else
	{
		pTime->secfracPrecision = 0;
		pTime->secfrac = 0;
	}

	/* check the timezone */
	if(*pszTS == 'Z')
	{
		pszTS++; /* eat Z */
		pTime->OffsetMode = 'Z';
		pTime->OffsetHour = 0;
		pTime->OffsetMinute = 0;
	}
	else if((*pszTS == '+') || (*pszTS == '-'))
	{
		pTime->OffsetMode = *pszTS;
		pszTS++;

		pTime->OffsetHour = srSLMGParseInt32(&pszTS);
		if(pTime->OffsetHour < 0 || pTime->OffsetHour > 23)
			return FALSE;

		if(*pszTS++ != ':')
			return FALSE;
		pTime->OffsetMinute = srSLMGParseInt32(&pszTS);
		if(pTime->OffsetMinute < 0 || pTime->OffsetMinute > 59)
			return FALSE;
	}
	else
		/* there MUST be TZ information */
		return FALSE;

	/* OK, we actually have a 3339 timestamp, so let's indicated this */
	if(*pszTS == ' ')
		++pszTS;
	else
		return FALSE;

	/* update parse pointer */
	*ppszTS = pszTS;

	return TRUE;
}


/**
 * Parse a TIMESTAMP-3164.
 * Returns TRUE on parse OK, FALSE on parse error.
 */
static int srSLMGParseTIMESTAMP3164(struct syslogTime *pTime, char* pszTS)
{
	assert(pTime != NULL);
	assert(pszTS != NULL);

	getCurrTime(pTime);	/* obtain the current year and UTC offsets! */

	/* If we look at the month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec),
	 * we may see the following character sequences occur:
	 *
	 * J(an/u(n/l)), Feb, Ma(r/y), A(pr/ug), Sep, Oct, Nov, Dec
	 *
	 * We will use this for parsing, as it probably is the
	 * fastest way to parse it.
	 *
	 * 2005-07-18, well sometimes it pays to be a bit more verbose, even in C...
	 * Fixed a bug that lead to invalid detection of the data. The issue was that
	 * we had an if(++pszTS == 'x') inside of some of the consturcts below. However,
	 * there were also some elseifs (doing the same ++), which than obviously did not
	 * check the orginal character but the next one. Now removed the ++ and put it
	 * into the statements below. Was a really nasty bug... I didn't detect it before
	 * june, when it first manifested. This also lead to invalid parsing of the rest
	 * of the message, as the time stamp was not detected to be correct. - rgerhards
	 */
	switch(*pszTS++)
	{
	case 'J':
		if(*pszTS == 'a') {
			++pszTS;
			if(*pszTS == 'n') {
				++pszTS;
				pTime->month = 1;
			} else
				return FALSE;
		} else if(*pszTS == 'u') {
			++pszTS;
			if(*pszTS == 'n') {
				++pszTS;
				pTime->month = 6;
			} else if(*pszTS == 'l') {
				++pszTS;
				pTime->month = 7;
			} else
				return FALSE;
		} else
			return FALSE;
		break;
	case 'F':
		if(*pszTS == 'e') {
			++pszTS;
			if(*pszTS == 'b') {
				++pszTS;
				pTime->month = 2;
			} else
				return FALSE;
		} else
			return FALSE;
		break;
	case 'M':
		if(*pszTS == 'a') {
			++pszTS;
			if(*pszTS == 'r') {
				++pszTS;
				pTime->month = 3;
			} else if(*pszTS == 'y') {
				++pszTS;
				pTime->month = 5;
			} else
				return FALSE;
		} else
			return FALSE;
		break;
	case 'A':
		if(*pszTS == 'p') {
			++pszTS;
			if(*pszTS == 'r') {
				++pszTS;
				pTime->month = 4;
			} else
				return FALSE;
		} else if(*pszTS == 'u') {
			++pszTS;
			if(*pszTS == 'g') {
				++pszTS;
				pTime->month = 8;
			} else
				return FALSE;
		} else
			return FALSE;
		break;
	case 'S':
		if(*pszTS == 'e') {
			++pszTS;
			if(*pszTS == 'p') {
				++pszTS;
				pTime->month = 9;
			} else
				return FALSE;
		} else
			return FALSE;
		break;
	case 'O':
		if(*pszTS == 'c') {
			++pszTS;
			if(*pszTS == 't') {
				++pszTS;
				pTime->month = 10;
			} else
				return FALSE;
		} else
			return FALSE;
		break;
	case 'N':
		if(*pszTS == 'o') {
			++pszTS;
			if(*pszTS == 'v') {
				++pszTS;
				pTime->month = 11;
			} else
				return FALSE;
		} else
			return FALSE;
		break;
	case 'D':
		if(*pszTS == 'e') {
			++pszTS;
			if(*pszTS == 'c') {
				++pszTS;
				pTime->month = 12;
			} else
				return FALSE;
		} else
			return FALSE;
		break;
	default:
		return FALSE;
	}

	/* done month */

	if(*pszTS++ != ' ')
		return FALSE;

	/* we accept a slightly malformed timestamp when receiving. This is
	 * we accept one-digit days
	 */
	if(*pszTS == ' ')
		++pszTS;

	pTime->day = srSLMGParseInt32(&pszTS);
	if(pTime->day < 1 || pTime->day > 31)
		return FALSE;

	if(*pszTS++ != ' ')
		return FALSE;
	pTime->hour = srSLMGParseInt32(&pszTS);
	if(pTime->hour < 0 || pTime->hour > 23)
		return FALSE;

	if(*pszTS++ != ':')
		return FALSE;
	pTime->minute = srSLMGParseInt32(&pszTS);
	if(pTime->minute < 0 || pTime->minute > 59)
		return FALSE;

	if(*pszTS++ != ':')
		return FALSE;
	pTime->second = srSLMGParseInt32(&pszTS);
	if(pTime->second < 0 || pTime->second > 60)
		return FALSE;
	if(*pszTS++ != ':')

	/* OK, we actually have a 3164 timestamp, so let's indicate this
	 * and fill the rest of the properties. */
	pTime->timeType = 1;
 	pTime->secfracPrecision = 0;
	pTime->secfrac = 0;
	return TRUE;
}

/*******************************************************************
 * END CODE-LIBLOGGING                                             *
 *******************************************************************/

/**
 * Format a syslogTimestamp into format required by MySQL.
 * We are using the 14 digits format. For example 20041111122600 
 * is interpreted as '2004-11-11 12:26:00'. 
 * The caller must provide the timestamp as well as a character
 * buffer that will receive the resulting string. The function
 * returns the size of the timestamp written in bytes (without
 * the string terminator). If 0 is returend, an error occured.
 */
int formatTimestampToMySQL(struct syslogTime *ts, char* pDst, size_t iLenDst)
{
	/* currently we do not consider localtime/utc. This may later be
	 * added. If so, I recommend using a property replacer option
	 * and/or a global configuration option. However, we should wait
	 * on user requests for this feature before doing anything.
	 * rgerhards, 2007-06-26
	 */
	assert(ts != NULL);
	assert(pDst != NULL);

	if (iLenDst < 15) /* we need at least 14 bytes
			     14 digits for timestamp + '\n' */
		return(0); 

	return(snprintf(pDst, iLenDst, "%4.4d%2.2d%2.2d%2.2d%2.2d%2.2d", 
		ts->year, ts->month, ts->day, ts->hour, ts->minute, ts->second));

}

/**
 * Format a syslogTimestamp to a RFC3339 timestamp string (as
 * specified in syslog-protocol).
 * The caller must provide the timestamp as well as a character
 * buffer that will receive the resulting string. The function
 * returns the size of the timestamp written in bytes (without
 * the string terminator). If 0 is returend, an error occured.
 */
int formatTimestamp3339(struct syslogTime *ts, char* pBuf, size_t iLenBuf)
{
	int iRet;
	char szTZ[7]; /* buffer for TZ information */

	assert(ts != NULL);
	assert(pBuf != NULL);
	
	if(iLenBuf < 20)
		return(0); /* we NEED at least 20 bytes */

	/* do TZ information first, this is easier to take care of "Z" zone in rfc3339 */
	if(ts->OffsetMode == 'Z') {
		szTZ[0] = 'Z';
		szTZ[1] = '\0';
	} else {
		snprintf(szTZ, sizeof(szTZ) / sizeof(char), "%c%2.2d:%2.2d",
			ts->OffsetMode, ts->OffsetHour, ts->OffsetMinute);
	}

	if(ts->secfracPrecision > 0)
	{	/* we now need to include fractional seconds. While doing so, we must look at
		 * the precision specified. For example, if we have millisec precision (3 digits), a
		 * secFrac value of 12 is not equivalent to ".12" but ".012". Obviously, this
		 * is a huge difference ;). To avoid this, we first create a format string with
		 * the specific precision and *then* use that format string to do the actual
		 * formating (mmmmhhh... kind of self-modifying code... ;)).
		 */
		char szFmtStr[64];
		/* be careful: there is ONE actual %d in the format string below ;) */
		snprintf(szFmtStr, sizeof(szFmtStr),
		         "%%04d-%%02d-%%02dT%%02d:%%02d:%%02d.%%0%dd%%s",
			ts->secfracPrecision);
		iRet = snprintf(pBuf, iLenBuf, szFmtStr, ts->year, ts->month, ts->day,
			        ts->hour, ts->minute, ts->second, ts->secfrac, szTZ);
	}
	else
		iRet = snprintf(pBuf, iLenBuf,
		 		"%4.4d-%2.2d-%2.2dT%2.2d:%2.2d:%2.2d%s",
				ts->year, ts->month, ts->day,
			        ts->hour, ts->minute, ts->second, szTZ);
	return(iRet);
}

/**
 * Format a syslogTimestamp to a RFC3164 timestamp sring.
 * The caller must provide the timestamp as well as a character
 * buffer that will receive the resulting string. The function
 * returns the size of the timestamp written in bytes (without
 * the string termnator). If 0 is returend, an error occured.
 */
int formatTimestamp3164(struct syslogTime *ts, char* pBuf, size_t iLenBuf)
{
	static char* monthNames[13] = {"ERR", "Jan", "Feb", "Mar",
	                               "Apr", "May", "Jun", "Jul",
				       "Aug", "Sep", "Oct", "Nov", "Dec"};
	assert(ts != NULL);
	assert(pBuf != NULL);
	
	if(iLenBuf < 16)
		return(0); /* we NEED 16 bytes */
	return(snprintf(pBuf, iLenBuf, "%s %2d %2.2d:%2.2d:%2.2d",
		monthNames[ts->month], ts->day, ts->hour,
		ts->minute, ts->second
		));
}

/**
 * Format a syslogTimestamp to a text format.
 * The caller must provide the timestamp as well as a character
 * buffer that will receive the resulting string. The function
 * returns the size of the timestamp written in bytes (without
 * the string termnator). If 0 is returend, an error occured.
 */
#if 0 /* This method is currently not called, be we like to preserve it */
static int formatTimestamp(struct syslogTime *ts, char* pBuf, size_t iLenBuf)
{
	assert(ts != NULL);
	assert(pBuf != NULL);
	
	if(ts->timeType == 1) {
		return(formatTimestamp3164(ts, pBuf, iLenBuf));
	}

	if(ts->timeType == 2) {
		return(formatTimestamp3339(ts, pBuf, iLenBuf));
	}

	return(0);
}
#endif


/**
 * Get the current date/time in the best resolution the operating
 * system has to offer (well, actually at most down to the milli-
 * second level.
 *
 * The date and time is returned in separate fields as this is
 * most portable and removes the need for additional structures
 * (but I have to admit it is somewhat "bulky";)).
 *
 * Obviously, all caller-provided pointers must not be NULL...
 */
void getCurrTime(struct syslogTime *t)
{
	struct timeval tp;
	struct tm *tm;
	long lBias;

	assert(t != NULL);
	gettimeofday(&tp, NULL);
	tm = localtime((time_t*) &(tp.tv_sec));

	t->year = tm->tm_year + 1900;
	t->month = tm->tm_mon + 1;
	t->day = tm->tm_mday;
	t->hour = tm->tm_hour;
	t->minute = tm->tm_min;
	t->second = tm->tm_sec;
	t->secfrac = tp.tv_usec;
	t->secfracPrecision = 6;

#	if __sun
		/* Solaris uses a different method of exporting the time zone.
		 * It is UTC - localtime, which is the opposite sign of mins east of GMT.
		 */
		lBias = -(daylight ? altzone : timezone);
#	else
		lBias = tm->tm_gmtoff;
#	endif
	if(lBias < 0)
	{
		t->OffsetMode = '-';
		lBias *= -1;
	}
	else
		t->OffsetMode = '+';
	t->OffsetHour = lBias / 3600;
	t->OffsetMinute = lBias % 3600;
}
/* rgerhards 2004-11-09: end of helper routines. On to the 
 * "real" code ;)
 */


static int usage(void)
{
	fprintf(stderr, "usage: rsyslogd [-46Adhvw] [-l hostlist] [-m markinterval] [-n] [-p path]\n" \
		" [-s domainlist] [-r[port]] [-tport[,max-sessions]] [-f conffile] [-i pidfile] [-x]\n");
	exit(1); /* "good" exit - done to terminate usage() */
}

#ifdef SYSLOG_UNIXAF
static int create_unix_socket(const char *path)
{
	struct sockaddr_un sunx;
	int fd;
	char line[MAXLINE +1];

	if (path[0] == '\0')
		return -1;

	(void) unlink(path);

	memset(&sunx, 0, sizeof(sunx));
	sunx.sun_family = AF_UNIX;
	(void) strncpy(sunx.sun_path, path, sizeof(sunx.sun_path));
	fd = socket(AF_UNIX, SOCK_DGRAM, 0);
	if (fd < 0 || bind(fd, (struct sockaddr *) &sunx,
			   SUN_LEN(&sunx)) < 0 ||
	    chmod(path, 0666) < 0) {
		snprintf(line, sizeof(line), "cannot create %s", path);
		logerror(line);
		dprintf("cannot create %s (%d).\n", path, errno);
		close(fd);
		return -1;
	}
	return fd;
}
#endif

#ifdef SYSLOG_INET
/* closes the UDP listen sockets (if they exist) and frees
 * all dynamically assigned memory. 
 */
static void closeUDPListenSockets()
{
	register int i;

        if(finet != NULL) {
	        for (i = 0; i < *finet; i++)
	                close(finet[i+1]);
		free(finet);
		finet = NULL;
	}
}


/* creates the UDP listen sockets
 */
static int *create_udp_socket()
{
        struct addrinfo hints, *res, *r;
        int error, maxs, *s, *socks, on = 1;
	int sockflags;

        memset(&hints, 0, sizeof(hints));
        hints.ai_flags = AI_PASSIVE | AI_NUMERICSERV;
        hints.ai_family = family;
        hints.ai_socktype = SOCK_DGRAM;
        error = getaddrinfo(NULL, LogPort, &hints, &res);
        if(error) {
               logerror((char*) gai_strerror(error));
	       logerror("UDP message reception disabled due to error logged in last message.\n");
	       return NULL;
	}

        /* Count max number of sockets we may open */
        for (maxs = 0, r = res; r != NULL ; r = r->ai_next, maxs++)
		/* EMPTY */;
        socks = malloc((maxs+1) * sizeof(int));
        if (socks == NULL) {
               logerror("couldn't allocate memory for UDP sockets, suspending UDP message reception");
               freeaddrinfo(res);
               return NULL;
        }

        *socks = 0;   /* num of sockets counter at start of array */
        s = socks + 1;
	for (r = res; r != NULL ; r = r->ai_next) {
               *s = socket(r->ai_family, r->ai_socktype, r->ai_protocol);
        	if (*s < 0) {
			if(!(r->ai_family == PF_INET6 && errno == EAFNOSUPPORT))
				logerror("create_udp_socket(), socket");
				/* it is debatable if PF_INET with EAFNOSUPPORT should
				 * also be ignored...
				 */
                        continue;
                }

#		ifdef IPV6_V6ONLY
                if (r->ai_family == AF_INET6) {
                	int ion = 1;
			if (setsockopt(*s, IPPROTO_IPV6, IPV6_V6ONLY,
			      (char *)&ion, sizeof (ion)) < 0) {
			logerror("setsockopt");
			close(*s);
			*s = -1;
			continue;
                	}
                }
#		endif

		/* if we have an error, we "just" suspend that socket. Eventually
		 * other sockets will work. At the end of this function, we check
		 * if we managed to open at least one socket. If not, we'll write
		 * a "inet suspended" message and declare failure. Else we use
		 * what we could obtain.
		 * rgerhards, 2007-06-22
		 */
       		if (setsockopt(*s, SOL_SOCKET, SO_REUSEADDR,
			       (char *) &on, sizeof(on)) < 0 ) {
			logerror("setsockopt(REUSEADDR)");
                        close(*s);
			*s = -1;
			continue;
		}

		/* We need to enable BSD compatibility. Otherwise an attacker
		 * could flood our log files by sending us tons of ICMP errors.
		 */
#ifndef BSD	
		if (should_use_so_bsdcompat()) {
			if (setsockopt(*s, SOL_SOCKET, SO_BSDCOMPAT,
					(char *) &on, sizeof(on)) < 0) {
				logerror("setsockopt(BSDCOMPAT)");
                                close(*s);
				*s = -1;
				continue;
			}
		}
#endif
		/* We must not block on the network socket, in case a packet
		 * gets lost between select and recv, otherwise the process
		 * will stall until the timeout, and other processes trying to
		 * log will also stall.
		 * Patch vom Colin Phipps <cph@cph.demon.co.uk> to the original
		 * sysklogd source. Applied to rsyslogd on 2005-10-19.
		 */
		if ((sockflags = fcntl(*s, F_GETFL)) != -1) {
			sockflags |= O_NONBLOCK;
			/* SETFL could fail too, so get it caught by the subsequent
			 * error check.
			 */
			sockflags = fcntl(*s, F_SETFL, sockflags);
		}
		if (sockflags == -1) {
			logerror("fcntl(O_NONBLOCK)");
                        close(*s);
			*s = -1;
			continue;
		}

		/* rgerhards, 2007-06-22: if we run on a kernel that does not support
		 * the IPV6_V6ONLY socket option, we need to use a work-around. On such
		 * systems the IPv6 socket does also accept IPv4 sockets. So an IPv4
		 * socket can not listen on the same port as an IPv6 socket. The only
		 * workaround is to ignore the "socket in use" error. This is what we
		 * do if we have to.
		 */
	        if(     (bind(*s, r->ai_addr, r->ai_addrlen) < 0)
#		ifndef IPV6_V6ONLY
		     && (errno != EADDRINUSE)
#		endif
	           ) {
                        logerror("bind");
                	close(*s);
			*s = -1;
                        continue;
                }

                (*socks)++;
                s++;
	}

        if(res != NULL)
               freeaddrinfo(res);

	if(Debug && *socks != maxs)
		dprintf("We could initialize %d UDP listen sockets out of %d we received "
		 	"- this may or may not be an error indication.\n", *socks, maxs);

        if(*socks == 0) {
		logerror("No UDP listen socket could successfully be initialized, "
			 "message reception via UDP disabled.\n");
		/* we do NOT need to free any sockets, because there were none... */
        	free(socks);
		return(NULL);
	}

	return(socks);
}
#endif

/* rgerhards, 2005-10-24: crunch_list is called only during option processing. So
 * it is never called once rsyslogd is running (not even when HUPed). This code
 * contains some exits, but they are considered safe because they only happen
 * during startup. Anyhow, when we review the code here, we might want to
 * reconsider the exit()s.
 */
static char **crunch_list(char *list)
{
	int count, i;
	char *p, *q;
	char **result = NULL;

	p = list;
	
	/* strip off trailing delimiters */
	while (p[strlen(p)-1] == LIST_DELIMITER) {
		count--;
		p[strlen(p)-1] = '\0';
	}
	/* cut off leading delimiters */
	while (p[0] == LIST_DELIMITER) {
		count--;
		p++; 
	}
	
	/* count delimiters to calculate elements */
	for (count=i=0; p[i]; i++)
		if (p[i] == LIST_DELIMITER) count++;
	
	if ((result = (char **)malloc(sizeof(char *) * (count+2))) == NULL) {
		printf ("Sorry, can't get enough memory, exiting.\n");
		exit(0); /* safe exit, because only called during startup */
	}
	
	/*
	 * We now can assume that the first and last
	 * characters are different from any delimiters,
	 * so we don't have to care about this.
	 */
	count = 0;
	while ((q=strchr(p, LIST_DELIMITER))) {
		result[count] = (char *) malloc((q - p + 1) * sizeof(char));
		if (result[count] == NULL) {
			printf ("Sorry, can't get enough memory, exiting.\n");
			exit(0); /* safe exit, because only called during startup */
		}
		strncpy(result[count], p, q - p);
		result[count][q - p] = '\0';
		p = q; p++;
		count++;
	}
	if ((result[count] = \
	     (char *)malloc(sizeof(char) * strlen(p) + 1)) == NULL) {
		printf ("Sorry, can't get enough memory, exiting.\n");
		exit(0); /* safe exit, because only called during startup */
	}
	strcpy(result[count],p);
	result[++count] = NULL;

#if 0
	count=0;
	while (result[count])
		dprintf ("#%d: %s\n", count, StripDomains[count++]);
#endif
	return result;
}


void untty(void)
#ifdef HAVE_SETSID
{
	if ( !Debug ) {
		setsid();
	}
	return;
}
#else
{
	int i;

	if ( !Debug ) {
		i = open(_PATH_TTY, O_RDWR);
		if (i >= 0) {
			(void) ioctl(i, (int) TIOCNOTTY, (char *)0);
			(void) close(i);
		}
	}
}
#endif


/* rgerhards, 2006-11-30: I have greatly changed this function. Formerly,
 * it tried to reassemble multi-part messages, which is a legacy stock
 * sysklogd concept. In essence, that was that messages not ending with
 * \0 were glued together. As far as I can see, this is a sysklogd
 * specific feature and, from looking at the code, seems to be used
 * pretty seldom (if at all). I remove this now, not the least because it is totally
 * incompatible with upcoming IETF syslog standards. If you experience
 * strange behaviour with messages beeing split across multiple lines,
 * this function here might be the place to look at.
 *
 * Some previous history worth noting:
 * I added the "iSource" parameter. This is needed to distinguish between
 * messages that have a hostname in them (received from the internet) and
 * those that do not have (most prominently /dev/log).  rgerhards 2004-11-16
 * And now I removed the "iSource" parameter and changed it to be "bParseHost",
 * because all that it actually controls is whether the host is parsed or not.
 * For rfc3195 support, we needed to modify the algo for host parsing, so we can
 * no longer rely just on the source (rfc3195d forwarded messages arrive via
 * unix domain sockets but contain the hostname). rgerhards, 2005-10-06
 */
void printchopped(char *hname, char *msg, int len, int fd, int bParseHost)
{
	register int iMsg;
	char *pMsg;
	char *pData;
	char *pEnd;
	char tmpline[MAXLINE + 1];
#	ifdef USE_NETZIP
	char deflateBuf[MAXLINE + 1];
	uLongf iLenDefBuf;
#	endif

	assert(hname != NULL);
	assert(msg != NULL);
	assert(len >= 0);

	dprintf("Message length: %d, File descriptor: %d.\n", len, fd);

	/* we first check if we need to drop trailing LFs, which often make
	 * their way into syslog messages unintentionally. In order to remain
	 * compatible to recent IETF developments, we allow the user to
	 * turn on/off this handling.  rgerhards, 2007-07-23
	 */
	if(bDropTrailingLF && *(msg + len - 1) == '\n') {
		*(msg + len - 1) = '\0';
		len--;
	}

	iMsg = 0;	/* initialize receiving buffer index */
	pMsg = tmpline; /* set receiving buffer pointer */
	pData = msg;	/* set source buffer pointer */
	pEnd = msg + len; /* this is one off, which is intensional */

#	ifdef USE_NETZIP
	/* we first need to check if we have a compressed record. If so,
	 * we must decompress it.
	 */
	if(len > 0 && *msg == 'z') { /* compressed data present? (do NOT change order if conditions!) */
		/* we have compressed data, so let's deflate it. We support a maximum
		 * message size of MAXLINE. If it is larger, an error message is logged
		 * and the message is dropped. We do NOT try to decompress larger messages
		 * as such might be used for denial of service. It might happen to later
		 * builds that such functionality be added as an optional, operator-configurable
		 * feature.
		 */
		int ret;
		iLenDefBuf = MAXLINE;
		ret = uncompress((uchar *) deflateBuf, &iLenDefBuf, (uchar *) msg+1, len-1);
		dprintf("Compressed message uncompressed with status %d, length: new %d, old %d.\n",
		        ret, iLenDefBuf, len-1);
		/* Now check if the uncompression worked. If not, there is not much we can do. In
		 * that case, we log an error message but ignore the message itself. Storing the
		 * compressed text is dangerous, as it contains control characters. So we do
		 * not do this. If someone would like to have a copy, this code here could be
		 * modified to do a hex-dump of the buffer in question. We do not include
		 * this functionality right now.
		 * rgerhards, 2006-12-07
		 */
		if(ret != Z_OK) {
			logerrorInt("Uncompression of a message failed with return code %d "
			            "- enable debug logging if you need further information. "
				    "Message ignored.", ret);
			return; /* unconditional exit, nothing left to do... */
		}
		pData = deflateBuf;
		pEnd = deflateBuf + iLenDefBuf;
	}
#	else /* ifdef USE_NETZIP */
	/* in this case, we still need to check if the message is compressed. If so, we must
	 * tell the user we can not accept it.
	 */
	if(len > 0 && *msg == 'z') {
		logerror("Received a compressed message, but rsyslogd does not have compression "
		         "support enabled. The message will be ignored.");
		return;
	}	
#	endif /* ifdef USE_NETZIP */

	while(pData < pEnd) {
		if(iMsg >= MAXLINE) {
			/* emergency, we now need to flush, no matter if
			 * we are at end of message or not...
			 */
			*(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */
			printline(hname, tmpline, bParseHost);
			return; /* in this case, we are done... nothing left we can do */
		}
		if(*pData == '\0') { /* guard against \0 characters... */
			/* changed to the sequence (somewhat) proposed in
			 * draft-ietf-syslog-protocol-19. rgerhards, 2006-11-30
			 */
			if(iMsg + 3 < MAXLINE) { /* do we have space? */
				*(pMsg + iMsg++) =  cCCEscapeChar;
				*(pMsg + iMsg++) = '0';
				*(pMsg + iMsg++) = '0';
				*(pMsg + iMsg++) = '0';
			} /* if we do not have space, we simply ignore the '\0'... */
			  /* log an error? Very questionable... rgerhards, 2006-11-30 */
			  /* decided: we do not log an error, it won't help... rger, 2007-06-21 */
			++pData;
		} else if(bEscapeCCOnRcv && iscntrl((int) *pData)) {
			/* we are configured to escape control characters. Please note
			 * that this most probably break non-western character sets like
			 * Japanese, Korean or Chinese. rgerhards, 2007-07-17
			 * Note: sysklogd logs octal values only for DEL and CCs above 127.
			 * For others, it logs ^n where n is the control char converted to an
			 * alphabet character. We like consistency and thus escape it to octal
			 * in all cases. If someone complains, we may change the mode. At least
			 * we known now what's going on.
			 * rgerhards, 2007-07-17
			 */
			if(iMsg + 3 < MAXLINE) { /* do we have space? */
				*(pMsg + iMsg++) = cCCEscapeChar;
				*(pMsg + iMsg++) = '0' + ((*pData & 0300) >> 6);
				*(pMsg + iMsg++) = '0' + ((*pData & 0070) >> 3);
				*(pMsg + iMsg++) = '0' + ((*pData & 0007));
			} /* again, if we do not have space, we ignore the char - see comment at '\0' */
			++pData;
		} else {
			*(pMsg + iMsg++) = *pData++;
		}
	}

	*(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */

	/* typically, we should end up here! */
	printline(hname, tmpline, bParseHost);

	return;
}

/* Take a raw input line, decode the message, and print the message
 * on the appropriate log files.
 * rgerhards 2004-11-08: Please note
 * that this function does only a partial decoding. At best, it splits 
 * the PRI part. No further decode happens. The rest is done in 
 * logmsg(). Please note that printsys() calls logmsg() directly, so
 * this is something we need to restructure once we are moving the
 * real decoder in here. I now (2004-11-09) found that printsys() seems
 * not to be called from anywhere. So we might as well decode the full
 * message here.
 * Added the iSource parameter so that we know if we have to parse
 * HOSTNAME or not. rgerhards 2004-11-16.
 * changed parameter iSource to bParseHost. For details, see comment in
 * printchopped(). rgerhards 2005-10-06
 */
void printline(char *hname, char *msg, int bParseHost)
{
	register char *p;
	int pri;
	msg_t *pMsg;

	/* Now it is time to create the message object (rgerhards)
	*/
	if((pMsg = MsgConstruct()) == NULL){
		/* rgerhards, 2007-06-21: if we can not get memory, we discard this
		 * message but continue to run (in the hope that things improve)
		 */
		glblHadMemShortage = 1;
		dprintf("Memory shortage in printline(): Could not construct Msg object.\n");
		return;
	}
	MsgSetRawMsg(pMsg, msg);
	
	pMsg->bParseHOSTNAME  = bParseHost;
	/* test for special codes */
	pri = DEFUPRI;
	p = msg;
	if (*p == '<') {
		pri = 0;
		while (isdigit((int) *++p))
		{
		   pri = 10 * pri + (*p - '0');
		}
		if (*p == '>')
			++p;
	}
	if (pri &~ (LOG_FACMASK|LOG_PRIMASK))
		pri = DEFUPRI;
	pMsg->iFacility = LOG_FAC(pri);
	pMsg->iSeverity = LOG_PRI(pri);

	/* Now we look at the HOSTNAME. That is a bit complicated...
	 * If we have a locally received message, it does NOT
	 * contain any hostname information in the message itself.
	 * As such, the HOSTNAME is the same as the system that
	 * the message was received from (that, for obvious reasons,
	 * being the local host).  rgerhards 2004-11-16
	 */
	if(bParseHost == 0)
		MsgSetHOSTNAME(pMsg, hname);
	MsgSetRcvFrom(pMsg, hname);

	/* rgerhards 2004-11-19: well, well... we've now seen that we
	 * have the "hostname problem" also with the traditional Unix
	 * message. As we like to emulate it, we need to add the hostname
	 * to it.
	 */
	if(MsgSetUxTradMsg(pMsg, p) != 0) return;

	logmsg(pri, pMsg, SYNC_FILE);

	/* rgerhards 2004-11-11:
	 * we are done with the message object. If it still is
	 * stored somewhere, we can call discard anyhow. This
	 * is handled via the reference count - see description
	 * of msg_t for details.
	 */
	MsgDestruct(pMsg);
	return;
}

time_t	now;

/* rgerhards 2004-11-09: the following is a function that can be used
 * to log a message orginating from the syslogd itself. In sysklogd code,
 * this is done by simply calling logmsg(). However, logmsg() is changed in
 * rsyslog so that it takes a msg "object". So it can no longer be called
 * directly. This method here solves the need. It provides an interface that
 * allows to construct a locally-generated message. Please note that this
 * function here probably is only an interim solution and that we need to
 * think on the best way to do this.
 */
static void logmsgInternal(int pri, char * msg, int flags)
{
	msg_t *pMsg;

	if((pMsg = MsgConstruct()) == NULL){
		/* rgerhards 2004-11-09: calling panic might not be the
		 * brightest idea - however, it is the best I currently have
		 * (think a bit more about this).
		 * rgehards, 2007-06-21: I have now thought a bit more about
		 * it. If we are so low on memory, there is few we can do. calling
		 * panic so far only write a debug line - this is seomthing we keep.
		 * Other than that, however, we ignore the error and hope that 
		 * memory shortage will be resolved while we continue to run. In any
		 * case, there is no valid point in aborting the syslogd for this
		 * reason - that would be counter-productive. So we ignore the
		 * to be logged message.
		 */
		glblHadMemShortage = 1;
		dprintf("Memory shortage in logmsgInternal: could not construct Msg object.\n");
		return;
	}

	MsgSetUxTradMsg(pMsg, msg);
	MsgSetRawMsg(pMsg, msg);
	MsgSetHOSTNAME(pMsg, LocalHostName);
	MsgSetTAG(pMsg, "rsyslogd:");
	pMsg->iFacility = LOG_FAC(pri);
	pMsg->iSeverity = LOG_PRI(pri);
	pMsg->bParseHOSTNAME = 0;
	getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */

	logmsg(pri, pMsg, flags | INTERNAL_MSG);
	MsgDestruct(pMsg);
}

/*
 * This functions looks at the given message and checks if it matches the
 * provided filter condition. If so, it returns true, else it returns
 * false. This is a helper to logmsg() and meant to drive the decision
 * process if a message is to be processed or not. As I expect this
 * decision code to grow more complex over time AND logmsg() is already
 * a very lengthe function, I thought a separate function is more appropriate.
 * 2005-09-19 rgerhards
 */
int shouldProcessThisMessage(selector_t *f, msg_t *pMsg)
{
	unsigned short pbMustBeFreed;
	char *pszPropVal;
	int iRet = 0;

	assert(f != NULL);
	assert(pMsg != NULL);

	/* we first have a look at the global, BSD-style block filters (for tag
	 * and host). Only if they match, we evaluate the actual filter.
	 * rgerhards, 2005-10-18
	 */
	if(f->eHostnameCmpMode == HN_NO_COMP) {
		/* EMPTY BY INTENSION - we check this value first, because
		 * it is the one most often used, so this saves us time!
		 */
	} else if(f->eHostnameCmpMode == HN_COMP_MATCH) {
		if(rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) {
			/* not equal, so we are already done... */
			dprintf("hostname filter '+%s' does not match '%s'\n", 
				rsCStrGetSzStr(f->pCSHostnameComp), getHOSTNAME(pMsg));
			return 0;
		}
	} else { /* must be -hostname */
		if(!rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) {
			/* not equal, so we are already done... */
			dprintf("hostname filter '-%s' does not match '%s'\n", 
				rsCStrGetSzStr(f->pCSHostnameComp), getHOSTNAME(pMsg));
			return 0;
		}
	}
	
	if(f->pCSProgNameComp != NULL) {
		if(rsCStrSzStrCmp(f->pCSProgNameComp, (uchar*) getProgramName(pMsg), getProgramNameLen(pMsg))) {
			/* not equal, so we are already done... */
			dprintf("programname filter '%s' does not match '%s'\n", 
				rsCStrGetSzStr(f->pCSProgNameComp), getProgramName(pMsg));
			return 0;
		}
	}
	
	/* done with the BSD-style block filters */

	if(f->f_filter_type == FILTER_PRI) {
		/* skip messages that are incorrect priority */
		if ( (f->f_filterData.f_pmask[pMsg->iFacility] == TABLE_NOPRI) || \
		    ((f->f_filterData.f_pmask[pMsg->iFacility] & (1<<pMsg->iSeverity)) == 0) )
			iRet = 0;
		else
			iRet = 1;
	} else {
		assert(f->f_filter_type == FILTER_PROP); /* assert() just in case... */
		pszPropVal = MsgGetProp(pMsg, NULL,
			        f->f_filterData.prop.pCSPropName, &pbMustBeFreed);

		/* Now do the compares (short list currently ;)) */
		switch(f->f_filterData.prop.operation ) {
		case FIOP_CONTAINS:
			if(rsCStrLocateInSzStr(f->f_filterData.prop.pCSCompValue, (uchar*) pszPropVal) != -1)
				iRet = 1;
			break;
		case FIOP_ISEQUAL:
			if(rsCStrSzStrCmp(f->f_filterData.prop.pCSCompValue,
					  (uchar*) pszPropVal, strlen(pszPropVal)) == 0)
				iRet = 1; /* process message! */
			break;
		case FIOP_STARTSWITH:
			if(rsCStrSzStrStartsWithCStr(f->f_filterData.prop.pCSCompValue,
					  (uchar*) pszPropVal, strlen(pszPropVal)) == 0)
				iRet = 1; /* process message! */
			break;
		case FIOP_REGEX:
			if(rsCStrSzStrMatchRegex(f->f_filterData.prop.pCSCompValue,
					  (unsigned char*) pszPropVal) == 0)
				iRet = 1;
			break;
		default:
			/* here, it handles NOP (for performance reasons) */
			assert(f->f_filterData.prop.operation == FIOP_NOP);
			iRet = 1; /* as good as any other default ;) */
			break;
		}

		/* now check if the value must be negated */
		if(f->f_filterData.prop.isNegated)
			iRet = (iRet == 1) ?  0 : 1;

		/* cleanup */
		if(pbMustBeFreed)
			free(pszPropVal);
		
		if(Debug) {
			char *pszPropValDeb;
			unsigned short pbMustBeFreedDeb;
			pszPropValDeb = MsgGetProp(pMsg, NULL,
					f->f_filterData.prop.pCSPropName, &pbMustBeFreedDeb);
			printf("Filter: check for property '%s' (value '%s') ",
			        rsCStrGetSzStr(f->f_filterData.prop.pCSPropName),
			        pszPropValDeb);
			if(f->f_filterData.prop.isNegated)
				printf("NOT ");
			printf("%s '%s': %s\n",
			       getFIOPName(f->f_filterData.prop.operation),
			       rsCStrGetSzStr(f->f_filterData.prop.pCSCompValue),
			       iRet ? "TRUE" : "FALSE");
			if(pbMustBeFreedDeb)
				free(pszPropValDeb);
		}
	}

	return(iRet);
}


/* Process (consume) a received message. Calls the actions configured.
 * Can some time later run in its own thread. To aid this, the calling
 * parameters should be reduced to just pMsg.
 * See comment dated 2005-10-13 in logmsg() on multithreading.
 * rgerhards, 2005-10-13
 */
static void processMsg(msg_t *pMsg)
{
	selector_t *f;
	int bContinue;

	assert(pMsg != NULL);

	/* log the message to the particular outputs */
	if (!Initialized) {
		fprintf(stderr, "%s\n", pMsg->pszMSG);
		return;
#if 0	/* TODO: I temporarily disable the emergency logging system. We must re-think
	 * how this is done, as we now have modules.
	 * rgerhards, 2007-07-24
	 */
		/* If we reach this point, the daemon initialization FAILED. That is,
		 * syslogd is NOT actually running. So what we do here is just
		 * initialize a pointer to the system console and then output
		 * the message to the it. So at least we have a little
		 * chance that messages show up somewhere.
		 * rgerhards 2004-11-09
		 */
		f = &consfile;
		f->f_file = open(ctty, O_WRONLY|O_NOCTTY);
		f->doAction = doActionFile;

		if (f->f_file >= 0) {
			untty();
			f->f_pMsg = MsgAddRef(pMsg); /* is expected here... */
			fprintlog(f);
			MsgDestruct(pMsg);
			(void) close(f->f_file);
			f->f_file = -1;
		}

		/* now log to a second emergency log... 2005-06-21 rgerhards */
		/* TODO: make this configurable, eventually via the command line */
		if(ttyname(0) != NULL) {
			memset(&emergfile, 0, sizeof(emergfile));
			f = &emergfile;
			emergfile.f_type = F_TTY;
			emergfile.doAction = doActionFile;
			strcpy(emergfile.f_un.f_file.f_fname, ttyname(0));
			cflineSetTemplateAndIOV(&emergfile, " TradFmt");
			f->f_file = open(ttyname(0), O_WRONLY|O_NOCTTY);

			if (f->f_file >= 0) {
				untty();
				f->f_pMsg = MsgAddRef(pMsg); /* is expected here... */
				fprintlog(f);
				MsgDestruct(pMsg);
				(void) close(f->f_file);
				f->f_file = -1;
			}                        
		}
		return; /* we are done with emergency loging */
#endif
	}

	bContinue = 1;
	for (f = Files; f != NULL && bContinue ; f = f->f_next) {
		/* first, we need to check if this is a disabled
		 * entry. If so, we must not further process it.
		 * rgerhards 2005-09-26
		 * In the future, disabled modules may be re-probed from time
		 * to time. They are in a perfectly legal state, except that the
		 * doAction method indicated that it wanted to be disabled - but
		 * we do not consider this is a solution for eternity... So we
		 * should check from time to time if affairs have improved.
		 * rgerhards, 2007-07-24
		 */
		if(f->bEnabled == 0)
			continue; /* on to next */

		/* This is actually the "filter logic". Looks like we need
		 * to improve it a little for complex selector line conditions. We
		 * won't do that for now, but at least we now know where
		 * to look at.
		 * 2005-09-09 rgerhards
		 * ok, we are now ready to move to something more advanced. Because
		 * of this, I am moving the actual decision code to outside this function.
		 * 2005-09-19 rgerhards
		 */
		if(!shouldProcessThisMessage(f, pMsg)) {
			continue;
		}

		/* don't output marks to recently written files */
		if ((pMsg->msgFlags & MARK) && (now - f->f_time) < MarkInterval / 2)
			continue;

		/* suppress duplicate lines to this file
		 */
		if ((f->f_ReduceRepeated == 1) &&
		    (pMsg->msgFlags & MARK) == 0 && getMSGLen(pMsg) == getMSGLen(f->f_pMsg) &&
		    !strcmp(getMSG(pMsg), getMSG(f->f_pMsg)) &&
		    !strcmp(getHOSTNAME(pMsg), getHOSTNAME(f->f_pMsg))) {
			f->f_prevcount++;
			dprintf("msg repeated %d times, %ld sec of %d.\n",
			    f->f_prevcount, now - f->f_time,
			    repeatinterval[f->f_repeatcount]);
			/* If domark would have logged this by now,
			 * flush it now (so we don't hold isolated messages),
			 * but back off so we'll flush less often in the future.
			 */
			if (now > REPEATTIME(f)) {
				if(fprintlog(f) == RS_RET_DISCARDMSG)
					bContinue = 0;
				BACKOFF(f);
			}
		} else {
			/* new line, save it */
			/* first check if we have a previous message stored
			 * if so, emit and then discard it first
			 */
			if(f->f_pMsg != NULL) {
				if(f->f_prevcount > 0)
					if(fprintlog(f) == RS_RET_DISCARDMSG)
						bContinue = 0;
				MsgDestruct(f->f_pMsg);
			}
			f->f_pMsg = MsgAddRef(pMsg);
			/* call the output driver */
			if(fprintlog(f) == RS_RET_DISCARDMSG)
				bContinue = 0;
		}
	}
}


#ifdef	USE_PTHREADS
/* This block contains code that is only present when USE_PTHREADS is
 * enabled. I plan to move it to some other file, but for the time
 * being, I include it here because that saves me from the need to
 * do so many external definitons.
 * rgerhards, 2005-10-24
 */

/* shuts down the worker process. The worker will first finish
 * with the message queue. Control returns, when done.
 * This function is intended to be called during syslogd shutdown
 * AND restart (init()!).
 * rgerhards, 2005-10-25
 */
static void stopWorker(void)
{
	if(bRunningMultithreaded) {
		/* we could run single-threaded if there was an error
		 * during startup. Then, we obviously do not need to
		 * do anything to stop the worker ;)
		 */
		dprintf("Initiating worker thread shutdown sequence...\n");
		/* We are now done with all messages, so we need to wake up the
		 * worker thread and then wait for it to finish.
		 */
		bGlblDone = 1;
		/* It's actually not "not empty" below but awaking the worker. The worker
		 * then finds out that it shall terminate and does so.
		 */
		pthread_cond_signal(pMsgQueue->notEmpty);
		pthread_join(thrdWorker, NULL);
		bRunningMultithreaded = 0;
		dprintf("Worker thread terminated.\n");
	}
}


/* starts the worker thread. It must be made sure that the queue is
 * already existing and the worker is NOT already running.
 * rgerhards 2005-10-25
 */
static void startWorker(void)
{
	int i;
	if(pMsgQueue != NULL) {
		bGlblDone = 0; /* we are NOT done (else worker would immediately terminate) */
		i = pthread_create(&thrdWorker, NULL, singleWorker, NULL);
		dprintf("Worker thread started with state %d.\n", i);
		bRunningMultithreaded = 1;
	} else {
		dprintf("message queue not existing, remaining single-threaded.\n");
	}
}


static msgQueue *queueInit (void)
{
	msgQueue *q;

	q = (msgQueue *)malloc (sizeof (msgQueue));
	if (q == NULL) return (NULL);

	q->empty = 1;
	q->full = 0;
	q->head = 0;
	q->tail = 0;
	q->mut = (pthread_mutex_t *) malloc (sizeof (pthread_mutex_t));
	pthread_mutex_init (q->mut, NULL);
	q->notFull = (pthread_cond_t *) malloc (sizeof (pthread_cond_t));
	pthread_cond_init (q->notFull, NULL);
	q->notEmpty = (pthread_cond_t *) malloc (sizeof (pthread_cond_t));
	pthread_cond_init (q->notEmpty, NULL);
	
	return (q);
}

static void queueDelete (msgQueue *q)
{
	pthread_mutex_destroy (q->mut);
	free (q->mut);	
	pthread_cond_destroy (q->notFull);
	free (q->notFull);
	pthread_cond_destroy (q->notEmpty);
	free (q->notEmpty);
	free (q);
}

static void queueAdd (msgQueue *q, void* in)
{
	q->buf[q->tail] = in;
	q->tail++;
	if (q->tail == QUEUESIZE)
		q->tail = 0;
	if (q->tail == q->head)
		q->full = 1;
	q->empty = 0;

	return;
}

static void queueDel (msgQueue *q, msg_t **out)
{
	*out = (msg_t*) q->buf[q->head];

	q->head++;
	if (q->head == QUEUESIZE)
		q->head = 0;
	if (q->head == q->tail)
		q->empty = 1;
	q->full = 0;

	return;
}


/* The worker thread (so far, we have dual-threading, so only one
 * worker thread. Having more than one worker requires considerable
 * additional code review in regard to thread-safety.
 */
static void *singleWorker()
{
	msgQueue *fifo = pMsgQueue;
	msg_t *pMsg;

	assert(fifo != NULL);

	while(!bGlblDone || !fifo->empty) {
		pthread_mutex_lock(fifo->mut);
		while (fifo->empty && !bGlblDone) {
			dprintf ("singleWorker: queue EMPTY, waiting for next message.\n");
			pthread_cond_wait (fifo->notEmpty, fifo->mut);
		}
		if(!fifo->empty) {
			/* dequeue element (still protected from mutex) */
			queueDel(fifo, &pMsg);
			assert(pMsg != NULL);
			pthread_mutex_unlock(fifo->mut);
			pthread_cond_signal (fifo->notFull);
			/* do actual processing (the lengthy part, runs in parallel) */
			dprintf("Lone worker is running...\n");
			processMsg(pMsg);
			MsgDestruct(pMsg);
			/* If you need a delay for testing, here do a */
			/* sleep(1); */
		} else { /* the mutex must be unlocked in any case (important for termination) */
			pthread_mutex_unlock(fifo->mut);
		}
		if(debugging_on && bGlblDone && !fifo->empty)
			dprintf("Worker does not yet terminate because it still has messages to process.\n");
	}

	dprintf("Worker thread terminates\n");
	pthread_exit(0);
}

/* END threads-related code */
#endif /* #ifdef USE_PTHREADS */


/* This method enqueues a message into the the message buffer. It also
 * the worker thread, so that the message will be processed. If we are
 * compiled without PTHREADS support, we simply use this method as
 * an alias for processMsg().
 * See comment dated 2005-10-13 in logmsg() on multithreading.
 * rgerhards, 2005-10-24
 */
#ifndef	USE_PTHREADS
#define enqueueMsg(x) processMsg((x))
#else
static void enqueueMsg(msg_t *pMsg)
{
	int iRet;
	msgQueue *fifo = pMsgQueue;

	assert(pMsg != NULL);

	if(bRunningMultithreaded == 0) {
		/* multi-threading is not yet initialized, happens e.g.
		 * during startup and restart. rgerhards, 2005-10-25
		 */
		 dprintf("enqueueMsg: not yet running on multiple threads\n");
		 processMsg(pMsg);
	} else {
		/* "normal" mode, threading initialized */
		iRet = pthread_mutex_lock(fifo->mut);
		while (fifo->full) {
			dprintf ("enqueueMsg: queue FULL.\n");
			pthread_cond_wait (fifo->notFull, fifo->mut);
		}
		queueAdd(fifo, MsgAddRef(pMsg));
		/* now activate the worker thread */
		pthread_mutex_unlock(fifo->mut);
		iRet = pthread_cond_signal(fifo->notEmpty);
		dprintf("EnqueueMsg signaled condition (%d)\n", iRet);
	}
}
#endif /* #ifndef USE_PTHREADS */


/* Helper to parseRFCSyslogMsg. This function parses a field up to
 * (and including) the SP character after it. The field contents is
 * returned in a caller-provided buffer. The parsepointer is advanced
 * to after the terminating SP. The caller must ensure that the 
 * provided buffer is large enough to hold the to be extracted value.
 * Returns 0 if everything is fine or 1 if either the field is not
 * SP-terminated or any other error occurs.
 * rger, 2005-11-24
 */
static int parseRFCField(char **pp2parse, char *pResult)
{
	char *p2parse;
	int iRet = 0;

	assert(pp2parse != NULL);
	assert(*pp2parse != NULL);
	assert(pResult != NULL);

	p2parse = *pp2parse;

	/* this is the actual parsing loop */
	while(*p2parse && *p2parse != ' ') {
		*pResult++ = *p2parse++;
	}

	if(*p2parse == ' ')
		++p2parse; /* eat SP, but only if not at end of string */
	else
		iRet = 1; /* there MUST be an SP! */
	*pResult = '\0';

	/* set the new parse pointer */
	*pp2parse = p2parse;
	return 0;
}


/* Helper to parseRFCSyslogMsg. This function parses the structured
 * data field of a message. It does NOT parse inside structured data,
 * just gets the field as whole. Parsing the single entities is left
 * to other functions. The parsepointer is advanced
 * to after the terminating SP. The caller must ensure that the 
 * provided buffer is large enough to hold the to be extracted value.
 * Returns 0 if everything is fine or 1 if either the field is not
 * SP-terminated or any other error occurs.
 * rger, 2005-11-24
 */
static int parseRFCStructuredData(char **pp2parse, char *pResult)
{
	char *p2parse;
	int bCont = 1;
	int iRet = 0;

	assert(pp2parse != NULL);
	assert(*pp2parse != NULL);
	assert(pResult != NULL);

	p2parse = *pp2parse;

	/* this is the actual parsing loop
	 * Remeber: structured data starts with [ and includes any characters
	 * until the first ] followed by a SP. There may be spaces inside
	 * structured data. There may also be \] inside the structured data, which
	 * do NOT terminate an element.
	 */
	if(*p2parse != '[')
		return 1; /* this is NOT structured data! */

	while(bCont) {
		if(*p2parse == '\0') {
			iRet = 1; /* this is not valid! */
			bCont = 0;
		} else if(*p2parse == '\\' && *(p2parse+1) == ']') {
			/* this is escaped, need to copy both */
			*pResult++ = *p2parse++;
			*pResult++ = *p2parse++;
		} else if(*p2parse == ']' && *(p2parse+1) == ' ') {
			/* found end, just need to copy the ] and eat the SP */
			*pResult++ = *p2parse;
			p2parse += 2;
			bCont = 0;
		} else {
			*pResult++ = *p2parse++;
		}
	}

	if(*p2parse == ' ')
		++p2parse; /* eat SP, but only if not at end of string */
	else
		iRet = 1; /* there MUST be an SP! */
	*pResult = '\0';

	/* set the new parse pointer */
	*pp2parse = p2parse;
	return 0;
}

/* parse a RFC-formatted syslog message. This function returns
 * 0 if processing of the message shall continue and 1 if something
 * went wrong and this messe should be ignored. This function has been
 * implemented in the effort to support syslog-protocol. Please note that
 * the name (parse *RFC*) stems from the hope that syslog-protocol will
 * some time become an RFC. Do not confuse this with informational
 * RFC 3164 (which is legacy syslog).
 *
 * currently supported format:
 *
 * <PRI>VERSION SP TIMESTAMP SP HOSTNAME SP APP-NAME SP PROCID SP MSGID SP [SD-ID]s SP MSG
 *
 * <PRI> is already stripped when this function is entered. VERSION already
 * has been confirmed to be "1", but has NOT been stripped from the message.
 *
 * rger, 2005-11-24
 */
static int parseRFCSyslogMsg(msg_t *pMsg, int flags)
{
	char *p2parse;
	char *pBuf;
	int bContParse = 1;

	assert(pMsg != NULL);
	assert(pMsg->pszUxTradMsg != NULL);
	p2parse = (char*) pMsg->pszUxTradMsg;

	/* do a sanity check on the version and eat it */
	assert(p2parse[0] == '1' && p2parse[1] == ' ');
	p2parse += 2;

	/* Now get us some memory we can use as a work buffer while parsing.
	 * We simply allocated a buffer sufficiently large to hold all of the
	 * message, so we can not run into any troubles. I think this is
	 * more wise then to use individual buffers.
	 */
	if((pBuf = malloc(sizeof(char)* strlen(p2parse) + 1)) == NULL)
		return 1;
		
	/* IMPORTANT NOTE:
	 * Validation is not actually done below nor are any errors handled. I have
	 * NOT included this for the current proof of concept. However, it is strongly
	 * advisable to add it when this code actually goes into production.
	 * rgerhards, 2005-11-24
	 */

	/* TIMESTAMP */
	if(srSLMGParseTIMESTAMP3339(&(pMsg->tTIMESTAMP),  &p2parse) == FALSE) {
		dprintf("no TIMESTAMP detected!\n");
		bContParse = 0;
		flags |= ADDDATE;
	}

	if (flags & ADDDATE) {
		getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */
	}

	/* HOSTNAME */
	if(bContParse) {
		parseRFCField(&p2parse, pBuf);
		MsgSetHOSTNAME(pMsg, pBuf);
	} else {
		/* we can not parse, so we get the system we
		 * received the data from.
		 */
		MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg));
	}

	/* APP-NAME */
	if(bContParse) {
		parseRFCField(&p2parse, pBuf);
		MsgSetAPPNAME(pMsg, pBuf);
	}

	/* PROCID */
	if(bContParse) {
		parseRFCField(&p2parse, pBuf);
		MsgSetPROCID(pMsg, pBuf);
	}

	/* MSGID */
	if(bContParse) {
		parseRFCField(&p2parse, pBuf);
		MsgSetMSGID(pMsg, pBuf);
	}

	/* STRUCTURED-DATA */
	if(bContParse) {
		parseRFCStructuredData(&p2parse, pBuf);
		MsgSetStructuredData(pMsg, pBuf);
	}

	/* MSG */
	MsgSetMSG(pMsg, p2parse);

	return 0; /* all ok */
}
/* parse a legay-formatted syslog message. This function returns
 * 0 if processing of the message shall continue and 1 if something
 * went wrong and this messe should be ignored. This function has been
 * implemented in the effort to support syslog-protocol.
 * rger, 2005-11-24
 * As of 2006-01-10, I am removing the logic to continue parsing only
 * when a valid TIMESTAMP is detected. Validity of other fields already
 * is ignored. This is due to the fact that the parser has grown smarter
 * and is now more able to understand different dialects of the syslog
 * message format. I do not expect any bad side effects of this change,
 * but I thought I log it in this comment.
 * rgerhards, 2006-01-10
 */
static int parseLegacySyslogMsg(msg_t *pMsg, int flags)
{
	char *p2parse;
	char *pBuf;
	char *pWork;
	rsCStrObj *pStrB;
	int iCnt;
	int bTAGCharDetected;

	assert(pMsg != NULL);
	assert(pMsg->pszUxTradMsg != NULL);
	p2parse = (char*) pMsg->pszUxTradMsg;

	/*
	 * Check to see if msg contains a timestamp
	 */
	if(srSLMGParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), p2parse) == TRUE)
		p2parse += 16;
	else {
		flags |= ADDDATE;
	}

	/* here we need to check if the timestamp is valid. If it is not,
	 * we can not continue to parse but must treat the rest as the 
	 * MSG part of the message (as of RFC 3164).
	 * rgerhards 2004-12-03
	 */
	(void) time(&now);
	if (flags & ADDDATE) {
		getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */
	}

	/* rgerhards, 2006-03-13: next, we parse the hostname and tag. But we 
	 * do this only when the user has not forbidden this. I now introduce some
	 * code that allows a user to configure rsyslogd to treat the rest of the
	 * message as MSG part completely. In this case, the hostname will be the
	 * machine that we received the message from and the tag will be empty. This
	 * is meant to be an interim solution, but for now it is in the code.
	 */

	if(bParseHOSTNAMEandTAG && !(flags & INTERNAL_MSG)) {
		/* parse HOSTNAME - but only if this is network-received!
		 * rger, 2005-11-14: we still have a problem with BSD messages. These messages
		 * do NOT include a host name. In most cases, this leads to the TAG to be treated
		 * as hostname and the first word of the message as the TAG. Clearly, this is not
		 * of advantage ;) I think I have now found a way to handle this situation: there
		 * are certain characters which are frequently used in TAG (e.g. ':'), which are
		 * *invalid* in host names. So while parsing the hostname, I check for these characters.
		 * If I find them, I set a simple flag but continue. After parsing, I check the flag.
		 * If it was set, then we most probably do not have a hostname but a TAG. Thus, I change
		 * the fields. I think this logic shall work with any type of syslog message.
		 */
		bTAGCharDetected = 0;
		if(pMsg->bParseHOSTNAME) {
			/* TODO: quick and dirty memory allocation */
			if((pBuf = malloc(sizeof(char)* strlen(p2parse) +1)) == NULL)
				return 1;
			pWork = pBuf;
			/* this is the actual parsing loop */
			while(*p2parse && *p2parse != ' ' && *p2parse != ':') {
				if(   *p2parse == '[' || *p2parse == ']' || *p2parse == '/')
					bTAGCharDetected = 1;
				*pWork++ = *p2parse++;
			}
			/* we need to handle ':' seperately, because it terminates the
			 * TAG - so we also need to terminate the parser here!
			 */
			if(*p2parse == ':') {
				bTAGCharDetected = 1;
				++p2parse;
			} else if(*p2parse == ' ')
				++p2parse;
			*pWork = '\0';
			MsgAssignHOSTNAME(pMsg, pBuf);
		}
		/* check if we seem to have a TAG */
		if(bTAGCharDetected) {
			/* indeed, this smells like a TAG, so lets use it for this. We take
			 * the HOSTNAME from the sender system instead.
			 */
			dprintf("HOSTNAME contains invalid characters, assuming it to be a TAG.\n");
			moveHOSTNAMEtoTAG(pMsg);
			MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg));
		}

		/* now parse TAG - that should be present in message from
		 * all sources.
		 * This code is somewhat not compliant with RFC 3164. As of 3164,
		 * the TAG field is ended by any non-alphanumeric character. In
		 * practice, however, the TAG often contains dashes and other things,
		 * which would end the TAG. So it is not desirable. As such, we only
		 * accept colon and SP to be terminators. Even there is a slight difference:
		 * a colon is PART of the TAG, while a SP is NOT part of the tag
		 * (it is CONTENT). Finally, we allow only up to 32 characters for
		 * TAG, as it is specified in RFC 3164.
		 */
		/* The following code in general is quick & dirty - I need to get
		 * it going for a test, rgerhards 2004-11-16 */
		/* lol.. we tried to solve it, just to remind ourselfs that 32 octets
		 * is the max size ;) we need to shuffle the code again... Just for 
		 * the records: the code is currently clean, but we could optimize it! */
		if(!bTAGCharDetected) {
			char *pszTAG;
			if((pStrB = rsCStrConstruct()) == NULL) 
				return 1;
			rsCStrSetAllocIncrement(pStrB, 33);
			pWork = pBuf;
			iCnt = 0;
			while(*p2parse && *p2parse != ':' && *p2parse != ' ' && iCnt < 32) {
				rsCStrAppendChar(pStrB, *p2parse++);
				++iCnt;
			}
			if(*p2parse == ':') {
				++p2parse; 
				rsCStrAppendChar(pStrB, ':');
			}
			rsCStrFinish(pStrB);

			pszTAG = (char*) rsCStrConvSzStrAndDestruct(pStrB);
			if(pszTAG == NULL)
			{	/* rger, 2005-11-10: no TAG found - this implies that what
				 * we have considered to be the HOSTNAME is most probably the
				 * TAG. We consider it so probable, that we now adjust it
				 * that way. So we pick up the previously set hostname, assign
				 * it to tag and use the sender system (from IP stack) as
				 * the hostname. This situation is the standard case with
				 * stock BSD syslogd.
				 */
				dprintf("No TAG in message, assuming that HOSTNAME is missing.\n");
				moveHOSTNAMEtoTAG(pMsg);
				MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg));
			}
			else
			{ /* we have a TAG, so we can happily set it ;) */
				MsgAssignTAG(pMsg, pszTAG);
			}
		} else {
			/* we have no TAG, so we ... */
			/*DO NOTHING*/;
		}
	} else {
		/* we enter this code area when the user has instructed rsyslog NOT
		 * to parse HOSTNAME and TAG - rgerhards, 2006-03-13
		 */
		if(!(flags & INTERNAL_MSG))
		{
			dprintf("HOSTNAME and TAG not parsed by user configuraton.\n");
			MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg));
		}
	}

	/* The rest is the actual MSG */
	MsgSetMSG(pMsg, p2parse);

	return 0; /* all ok */
}


/*
 * Log a message to the appropriate log files, users, etc. based on
 * the priority.
 * rgerhards 2004-11-08: actually, this also decodes all but the PRI part.
 * rgerhards 2004-11-09: ... but only, if syslogd could properly be initialized
 *			 if not, we use emergency logging to the console and in
 *                       this case, no further decoding happens.
 * changed to no longer receive a plain message but a msg object instead.
 * rgerhards-2004-11-16: OK, we are now up to another change... This method
 * actually needs to PARSE the message. How exactly this needs to happen depends on
 * a number of things. Most importantly, it depends on the source. For example,
 * locally received messages (SOURCE_UNIXAF) do NOT have a hostname in them. So
 * we need to treat them differntly form network-received messages which have.
 * Well, actually not all network-received message really have a hostname. We
 * can just hope they do, but we can not be sure. So this method tries to find
 * whatever can be found in the message and uses that... Obviously, there is some
 * potential for misinterpretation, which we simply can not solve under the
 * circumstances given.
 */
void logmsg(int pri, msg_t *pMsg, int flags)
{
	char *msg;
	char PRItext[20];

	assert(pMsg != NULL);
	assert(pMsg->pszUxTradMsg != NULL);
	msg = (char*) pMsg->pszUxTradMsg;
	dprintf("logmsg: %s, flags %x, from '%s', msg %s\n",
	        textpri(PRItext, sizeof(PRItext) / sizeof(char), pri),
		flags, getRcvFrom(pMsg), msg);

	/* rger 2005-11-24 (happy thanksgiving!): we now need to check if we have
	 * a traditional syslog message or one formatted according to syslog-protocol.
	 * We need to apply different parsers depending on that. We use the
	 * -protocol VERSION field for the detection.
	 */
	if(msg[0] == '1' && msg[1] == ' ') {
		dprintf("Message has syslog-protocol format.\n");
		setProtocolVersion(pMsg, 1);
		if(parseRFCSyslogMsg(pMsg, flags) == 1)
			return;
	} else { /* we have legacy syslog */
		dprintf("Message has legacy syslog format.\n");
		setProtocolVersion(pMsg, 0);
		if(parseLegacySyslogMsg(pMsg, flags) == 1)
			return;
	}

	/* ---------------------- END PARSING ---------------- */

	/* rgerhards, 2005-10-13: if we consider going multi-threaded, this
	 * is probably the best point to split between a producer and a consumer
	 * thread. In general, with the first multi-threaded approach, we should
	 * NOT try to do more than have a single producer and consumer, at least
	 * if both are from the current code base. The issue is that this code
	 * was definitely not written with reentrancy in mind and uses a lot of
	 * global variables. So it is very dangerous to simply go ahead and multi
	 * thread it. However, I think there is a clear distinction between
	 * producer (where data is received) and consumer (where the actions are).
	 * It should be fairly safe to create a single thread for each and run them
	 * concurrently, thightly coupled via an in-memory queue. Even with this 
	 * limited multithraeding, benefits are immediate: the lengthy actions
	 * (database writes!) are de-coupled from the receivers, what should result
	 * in less likely message loss (loss due to receiver overrun). It also allows
	 * us to utilize 2-cpu systems, which will soon be common given the current
	 * advances in multicore CPU hardware. So this is well worth trying.
	 * Another plus of this two-thread-approach would be that it can easily be configured,
	 * so if there are compatibility issues with the threading libs, we could simply
	 * disable it (as a makefile feature).
	 * There is one important thing to keep in mind when doing this basic
	 * multithreading. The syslog/tcp message forwarder manipulates a structutre
	 * that is used by the main thread, which actually sends the data. This
	 * structure must be guarded by a mutex, else we will have race conditions and
	 * some very bad things could happen.
	 *
	 * Additional consumer threads might be added relatively easy for new receivers,
	 * e.g. if we decide to move RFC 3195 via liblogging natively into rsyslogd.
	 *
	 * To aid this functionality, I am moving the rest of the code (the actual
	 * consumer) to its own method, now called "processMsg()".
	 *
	 * rgerhards, 2005-10-25: as of now, the dual-threading code is now in place.
	 * It is an optional feature and even when enabled, rsyslogd will run single-threaded
	 * if it gets any errors during thread creation.
	 */
	
	pMsg->msgFlags = flags;
	enqueueMsg(pMsg);
}



/* create a string from the provided iovec. This can
 * be called by all functions who need the template
 * text in a single string. The function takes an
 * entry of the filed structure. It uses all data
 * from there. It returns a pointer to the generated
 * string if it succeeded, or NULL otherwise.
 * rgerhards 2004-11-22 
 */
char *iovAsString(selector_t *f)
{
	struct iovec *v;
	int i;
	rsCStrObj *pStrB;

	assert(f != NULL);

	if(f->f_psziov != NULL) {
		/* for now, we always free a previous buffer.
		 * The idea, however, is to keep a copy of the
		 * buffer until we know we no longer can re-use it.
		 */
		free(f->f_psziov);
	}

	if((pStrB = rsCStrConstruct()) == NULL) {
		/* oops - no mem, let's try to set the message we have
		 * most probably, this will fail, too. But at least we
		 * can try... */
		return NULL;
	}

	i = 0;
	f->f_iLenpsziov = 0;
	v = f->f_iov;
	while(i++ < f->f_iIovUsed) {
		if(v->iov_len > 0) {
			if(rsCStrAppendStr(pStrB, v->iov_base) != RS_RET_OK) {
				/* most probably out of memory... */
				rsCStrDestruct(pStrB);
				return NULL;
			}
			f->f_iLenpsziov += v->iov_len;
		}
		++v;
	}

	rsCStrFinish(pStrB);
	f->f_psziov = (char*) rsCStrConvSzStrAndDestruct(pStrB);
	return f->f_psziov;
}


/* rgerhards 2004-11-24: free the to-be-freed string in
 * iovec. Some strings point to read-only constants in the
 * msg object, these must not be taken care of. But some
 * are specifically created for this instance and those
 * must be freed before the next is created. This is done
 * here. After this method has been called, the iovec
 * string array is invalid and must either be totally
 * discarded or e-initialized!
 */
void iovDeleteFreeableStrings(selector_t *f)
{
	register int i;

	assert(f != NULL);

	for(i = 0 ; i < f->f_iIovUsed ; ++i) {
		/* free to-be-freed strings in iovec */
		if(*(f->f_bMustBeFreed + i)) {
			free((f->f_iov + i)->iov_base);
			*(f->f_bMustBeFreed) = 0;
		}
	}
}


/* rgerhards 2004-11-19: create the iovec for
 * a given message. This is called by all methods
 * using iovec's for their output. Returns the number
 * of iovecs used (might be different from max if the
 * template contains an invalid entry).
 */
void  iovCreate(selector_t *f)
{
	register struct iovec *v;
	int iIOVused;
	struct template *pTpl;
	struct templateEntry *pTpe;
	msg_t *pMsg;
	char *pVal;	/* This variable must be introduced to keep with strict aliasing rules */
	size_t iLenVal;	/* This variable must be introduced to keep with strict aliasing rules */

	assert(f != NULL);

	/* discard previous memory buffers */
	iovDeleteFreeableStrings(f);
	
	pMsg = f->f_pMsg;
	pTpl = f->f_pTpl;
	v = f->f_iov;
	
	iIOVused = 0;
	pTpe = pTpl->pEntryRoot;
	while(pTpe != NULL) {
		if(pTpe->eEntryType == CONSTANT) {
			v->iov_base = pTpe->data.constant.pConstant;
			v->iov_len = pTpe->data.constant.iLenConstant;
			++v;
			++iIOVused;
		} else 	if(pTpe->eEntryType == FIELD) {
			/* Just for the records and because I needed some time to look it up again:
			 * f->f_bMustBeFreed + iIOVused is a pointer to the "must be freed" indicator
			 * for the entry in question. So, yes, we are passing in a pointer and it gets
			 * updated by the called procedures. The address of operator (&) must NOT be used
			 * because it already is a pointer. Actually, f->f_bMustBeFreed is the base address
			 * of an array of unsigned shorts. This array is allocated when the configuration
			 * file is read. rgerhards, 2007-06-26
			 */
			pVal = MsgGetProp(pMsg, pTpe, NULL, f->f_bMustBeFreed + iIOVused);
			iLenVal = strlen(pVal);
			/* we now need to check if we should use SQL option. In this case,
			 * we must go over the generated string and escape '\'' characters.
			 * rgerhards, 2005-09-22: the option values below look somewhat misplaced,
			 * but they are handled in this way because of legacy (don't break any
			 * existing thing).
			 */
			if(f->f_pTpl->optFormatForSQL == 1)
				doSQLEscape(&pVal, &iLenVal, f->f_bMustBeFreed + iIOVused, 1);
			else if(f->f_pTpl->optFormatForSQL == 2)
				doSQLEscape(&pVal, &iLenVal, f->f_bMustBeFreed + iIOVused, 0);
			v->iov_base = pVal;
			v->iov_len = iLenVal;
			++v;
			++iIOVused;
		}
		pTpe = pTpe->pNext;
	}
	
	f->f_iIovUsed = iIOVused;

#if 0 /* debug aid */
{
	int i;
	v = f->f_iov;
	for(i = 0 ; i < iIOVused ; ++i, ++v) {
		printf("iovCreate(%d), string '%s', mustbeFreed %d\n", i,
		        v->iov_base, *(f->f_bMustBeFreed + i));
	}
}
#endif /* debug aid */
	return;
}


/* rgerhards 2004-11-09: fprintlog() is the actual driver for
 * the output channel. It receives the channel description (f) as
 * well as the message and outputs them according to the channel
 * semantics. The message is typically already contained in the
 * channel save buffer (f->f_prevline). This is not only the case
 * when a message was already repeated but also when a new message
 * arrived.
 */
rsRetVal fprintlog(register selector_t *f)
{
	msg_t *pMsgSave;	/* to save current message pointer, necessary to restore
				   it in case it needs to be updated (e.g. repeated msgs) */
	pMsgSave = NULL;	/* indicate message poiner not saved */
	rsRetVal iRet = RS_RET_OK;

	/* first check if this is a regular message or the repeation of
	 * a previous message. If so, we need to change the message text
	 * to "last message repeated n times" and then go ahead and write
	 * it. Please note that we can not modify the message object, because
	 * that would update it in other selectors as well. As such, we first
	 * need to create a local copy of the message, which we than can update.
	 * rgerhards, 2007-07-10
	 */
	if(f->f_prevcount > 1) {
		msg_t *pMsg;
		uchar szRepMsg[64];
		snprintf((char*)szRepMsg, sizeof(szRepMsg), "last message repeated %d times",
		    f->f_prevcount);

		if((pMsg = MsgDup(f->f_pMsg)) == NULL) {
			/* it failed - nothing we can do against it... */
			dprintf("Message duplication failed, dropping repeat message.\n");
			return RS_RET_ERR;
		}

		/* We now need to update the other message properties.
		 * ... RAWMSG is a problem ... Please note that digital
		 * signatures inside the message are also invalidated.
		 */
		getCurrTime(&(pMsg->tRcvdAt));
		getCurrTime(&(pMsg->tTIMESTAMP));
		MsgSetMSG(pMsg, (char*)szRepMsg);
		MsgSetRawMsg(pMsg, (char*)szRepMsg);

		pMsgSave = f->f_pMsg;	/* save message pointer for later restoration */
		f->f_pMsg = pMsg;	/* use the new msg (pointer will be restored below) */
	}

	dprintf("Called fprintlog, logging to %s", modGetStateName(f->pMod));

	f->f_time = now; /* we need this for message repeation processing TODO: why must "now" be global? */

	/* When we reach this point, we have a valid, non-disabled action.
	 * So let's execute it. -- rgerhards, 2007-07-24
	 */
	iRet = f->pMod->mod.om.doAction(f);	/* call configured action */
	if(iRet == RS_RET_DISABLE_ACTION)
		f->bEnabled = 0; /* that's it... */
	// TODO: this causes problems for the emergency logging system!

	if (f->f_type != F_FORW_UNKN)
		f->f_prevcount = 0;

	if(pMsgSave != NULL) {
		/* we had saved the original message pointer. That was
		 * done because we needed to create a temporary one
		 * (most often for "message repeated n time" handling. If so,
		 * we need to restore the original one now, so that procesing
		 * can continue as normal. We also need to discard the temporary
		 * one, as we do not like memory leaks ;) Please note that the original
		 * message object will be discarded by our callers, so this is nothing
		 * of our buisiness. rgerhards, 2007-07-10
		 */
		MsgDestruct(f->f_pMsg);
		f->f_pMsg = pMsgSave;	/* restore it */
	}

	return iRet;
}


static void reapchild()
{
	int saved_errno = errno;
	signal(SIGCHLD, reapchild);	/* reset signal handler -ASP */
	wait(NULL);
	errno = saved_errno;
}


/* This method writes mark messages and - some time later - flushes reapeat
 * messages.
 * This method was initially called by an alarm handler. As such, it could potentially
 * have  race-conditons. For details, see
 * http://lkml.org/lkml/2005/3/26/37
 * http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=301511
 * I have now changed it so that the alarm handler only sets a global variable, telling
 * the main thread that it must do mark processing. So domark() is now called from the
 * main thread itself, which is the only thing to make sure rsyslogd will not do
 * strange things. The way it originally was seemed to work because mark occurs very
 * seldom. However, the code called was anything else but reentrant, so it was like
 * russian roulette.
 * rgerhards, 2005-10-20
 */
static void domark(void)
{
	register selector_t *f;
	if (MarkInterval > 0) {
		now = time(NULL);
		MarkSeq += TIMERINTVL;
		if (MarkSeq >= MarkInterval) {
			logmsgInternal(LOG_INFO, "-- MARK --", ADDDATE|MARK);
			MarkSeq = 0;
		}

		/* see if we need to flush any "message repeated n times"... */
		for (f = Files; f != NULL ; f = f->f_next) {
			if (f->f_prevcount && now >= REPEATTIME(f)) {
				dprintf("flush %s: repeated %d times, %d sec.\n",
				    modGetStateName(f->pMod), f->f_prevcount,
				    repeatinterval[f->f_repeatcount]);
				fprintlog(f);
				BACKOFF(f);
			}
		}
	}
}


/* This is the alarm handler setting the global variable for
 * domark request. See domark() comments for further details.
 * rgerhards, 2005-10-20
 */
static void domarkAlarmHdlr()
{
	bRequestDoMark = 1; /* request alarm */
	(void) signal(SIGALRM, domarkAlarmHdlr);
	(void) alarm(TIMERINTVL);
}


static void debug_switch()
{
	dprintf("Switching debugging_on to %s\n", (debugging_on == 0) ? "true" : "false");
	debugging_on = (debugging_on == 0) ? 1 : 0;
	signal(SIGUSR1, debug_switch);
}


/*
 * Add a string to error message and send it to logerror()
 * The error message is passed to snprintf() and must be
 * correctly formatted for it (containing a single %s param).
 * rgerhards 2005-09-19
 */
void logerrorSz(char *type, char *errMsg)
{
	char buf[1024];

	snprintf(buf, sizeof(buf), type, errMsg);
	buf[sizeof(buf)/sizeof(char) - 1] = '\0'; /* just to be on the safe side... */
	logerror(buf);
	return;
}

/*
 * Add an integer to error message and send it to logerror()
 * The error message is passed to snprintf() and must be
 * correctly formatted for it (containing a single %d param).
 * rgerhards 2005-09-19
 */
void logerrorInt(char *type, int errCode)
{
	char buf[1024];

	snprintf(buf, sizeof(buf), type, errCode);
	buf[sizeof(buf)/sizeof(char) - 1] = '\0'; /* just to be on the safe side... */
	logerror(buf);
	return;
}

/* Print syslogd errors some place.
 */
void logerror(char *type)
{
	char buf[1024];

	dprintf("Called logerr, msg: %s\n", type);

	if (errno == 0)
		snprintf(buf, sizeof(buf), "%s", type);
	else
		snprintf(buf, sizeof(buf), "%s: %s", type, strerror(errno));
	buf[sizeof(buf)/sizeof(char) - 1] = '\0'; /* just to be on the safe side... */
	errno = 0;
	logmsgInternal(LOG_SYSLOG|LOG_ERR, buf, ADDDATE);
	return;
}

/* doDie() is a signal handler. If called, it sets the bFinished variable
 * to indicate the program should terminate. However, it does not terminate
 * it itself, because that causes issues with multi-threading. The actual
 * termination is then done on the main thread. This solution might introduce
 * a minimal delay, but it is much cleaner than the approach of doing everything
 * inside the signal handler.
 * rgerhards, 2005-10-26
 */
static void doDie(int sig)
{
	dprintf("DoDie called.\n");
	bFinished = sig;
}


/* die() is called when the program shall end. This typically only occurs
 * during sigterm or during the initialization. If you search for places where
 * it is called, search for "die", not "die(", because the later will not find
 * setting of signal handlers! As die() is intended to shutdown rsyslogd, it is
 * safe to call exit() here. Just make sure that die() itself is not called
 * at inapropriate places. As a general rule of thumb, it is a bad idea to add
 * any calls to die() in new code!
 * rgerhards, 2005-10-24
 */
static void die(int sig)
{
	register selector_t *f;
	char buf[256];
	int i;
	int was_initialized = Initialized;

	Initialized = 0;	/* Don't log SIGCHLDs in case we receive one during exiting */

	for (f = Files; f != NULL ; f = f->f_next) {
		/* flush any pending output */
		if (f->f_prevcount)
			fprintlog(f);
	}

	Initialized = was_initialized; /* we restore this so that the logmsgInternal() 
	                                * below can work ... and keep in mind we need the
					* filed structure still intact (initialized) for the below! */
	if (sig) {
		dprintf(" exiting on signal %d\n", sig);
		(void) snprintf(buf, sizeof(buf) / sizeof(char),
		 " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \
		 "\" x-pid=\"%d\"]" " exiting on signal %d.",
		 (int) myPid, sig);
		errno = 0;
		logmsgInternal(LOG_SYSLOG|LOG_INFO, buf, ADDDATE);
	}

#ifdef	USE_PTHREADS
	stopWorker();
	queueDelete(pMsgQueue); /* delete fifo here! */
	pMsgQueue = 0;
#endif


	/* Free ressources and close connections */
	freeSelectors();
	
	/* now clean up the listener part */
#ifdef SYSLOG_INET
	/* Close the UNIX sockets. */
        for (i = 0; i < nfunix; i++)
		if (funix[i] != -1)
			close(funix[i]);
	/* Close the UDP inet socket. */
	closeUDPListenSockets();
	/* Close the TCP inet socket. */
	if(sockTCPLstn != NULL && *sockTCPLstn) {
		deinit_tcp_listener();
	}
#endif

	/* Clean-up files. */
        for (i = 0; i < nfunix; i++)
		if (funixn[i] && funix[i] != -1)
			(void)unlink(funixn[i]);

	/* rger 2005-02-22
	 * now clean up the in-memory structures. OK, the OS
	 * would also take care of that, but if we do it
	 * ourselfs, this makes finding memory leaks a lot
	 * easier.
	 */
	tplDeleteAll();

	if(consfile.f_iov != NULL)
		free(consfile.f_iov);
	if(consfile.f_bMustBeFreed != NULL)
		free(consfile.f_bMustBeFreed);

	if(emergfile.f_iov != NULL)
		free(emergfile.f_iov);
	if(emergfile.f_bMustBeFreed != NULL)
		free(emergfile.f_bMustBeFreed);

	remove_pid(PidFile);
	if(glblHadMemShortage)
		dprintf("Had memory shortage at least once during the run.\n");
	dprintf("Clean shutdown completed, bye.\n");
	exit(0); /* "good" exit, this is the terminator function for rsyslog [die()] */
}

/*
 * Signal handler to terminate the parent process.
 * rgerhards, 2005-10-24: this is only called during forking of the
 * detached syslogd. I consider this method to be safe.
 */
static void doexit()
{
	exit(0); /* "good" exit, only during child-creation */
}


/* parse an allowed sender config line and add the allowed senders
 * (if the line is correct).
 * rgerhards, 2005-09-27
 */
static rsRetVal addAllowedSenderLine(char* pName, uchar** ppRestOfConfLine)
{
#ifdef SYSLOG_INET
	struct AllowedSenders **ppRoot;
	struct AllowedSenders **ppLast;
	rsParsObj *pPars;
	rsRetVal iRet;
	struct NetAddr *uIP = NULL;
	int iBits;
#endif

	assert(pName != NULL);
	assert(ppRestOfConfLine != NULL);
	assert(*ppRestOfConfLine != NULL);

#ifndef SYSLOG_INET
	errno = 0;
	logerror("config file contains allowed sender list, but rsyslogd "
	         "compiled without Internet support - line ignored");
	return RS_RET_ERR;
#else
	if(!strcasecmp(pName, "udp")) {
		ppRoot = &pAllowedSenders_UDP;
		ppLast = &pLastAllowedSenders_UDP;
	} else if(!strcasecmp(pName, "tcp")) {
		ppRoot = &pAllowedSenders_TCP;
		ppLast = &pLastAllowedSenders_TCP;
	} else {
		logerrorSz("Invalid protocol '%s' in allowed sender "
		           "list, line ignored", pName);
		return RS_RET_ERR;
	}

	/* OK, we now know the protocol and have valid list pointers.
	 * So let's process the entries. We are using the parse class
	 * for this.
	 */
	/* create parser object starting with line string without leading colon */
	if((iRet = rsParsConstructFromSz(&pPars, (uchar*) *ppRestOfConfLine) != RS_RET_OK)) {
		logerrorInt("Error %d constructing parser object - ignoring allowed sender list", iRet);
		return(iRet);
	}

	while(!parsIsAtEndOfParseString(pPars)) {
		if(parsPeekAtCharAtParsPtr(pPars) == '#')
			break; /* a comment-sign stops processing of line */
		/* now parse a single IP address */
		if((iRet = parsAddrWithBits(pPars, &uIP, &iBits)) != RS_RET_OK) {
			logerrorInt("Error %d parsing address in allowed sender"
				    "list - ignoring.", iRet);
			rsParsDestruct(pPars);
			return(iRet);
		}
		if((iRet = AddAllowedSender(ppRoot, ppLast, uIP, iBits))
			!= RS_RET_OK) {
			logerrorInt("Error %d adding allowed sender entry "
				    "- ignoring.", iRet);
			rsParsDestruct(pPars);
			return(iRet);
		}
		free (uIP); /* copy stored in AllowedSenders list */ 
	}

	/* cleanup */
	*ppRestOfConfLine += parsGetCurrentPosition(pPars);
	return rsParsDestruct(pPars);
#endif /*#ifndef SYSLOG_INET */
}


/* skip over whitespace in a standard C string. The
 * provided pointer is advanced to the first non-whitespace
 * charater or the \0 byte, if there is none. It is never
 * moved past the \0.
 */
static void skipWhiteSpace(uchar **pp)
{
	register uchar *p;

	assert(pp != NULL);
	assert(*pp != NULL);

	p = *pp;
	while(*p && isspace((int) *p))
		++p;
	*pp = p;
}


/* Parse and interpret a $DynaFileCacheSize line.
 * Parameter **pp has a pointer to the current config line.
 * On exit, it will be updated to the processed position.
 * rgerhards, 2007-07-4 (happy independence day to my US friends!)
 */
static void doDynaFileCacheSizeLine(uchar **pp)
{
	uchar *p;
	uchar errMsg[128];	/* for dynamic error messages */
	int i;

	assert(pp != NULL);
	assert(*pp != NULL);
	
	skipWhiteSpace(pp); /* skip over any whitespace */
	p = *pp;

	if(!isdigit((int) *p)) {
		snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar),
		         "DynaFileCacheSize invalid, value '%s'.", p);
		errno = 0;
		logerror((char*) errMsg);
		return;
	}

	/* pull value */
	for(i = 0 ; *p && isdigit((int) *p) ; ++p)
		i = i * 10 + *p - '0';
	
	if(i < 1) {
		snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar),
		         "DynaFileCacheSize must be greater 0 (%d given), changed to 1.", i);
		errno = 0;
		logerror((char*) errMsg);
		i = 1;
	} else if(i > 10000) {
		snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar),
		         "DynaFileCacheSize maximum is 10,000 (%d given), changed to 10,000.", i);
		errno = 0;
		logerror((char*) errMsg);
		i = 10000;
	}

	iDynaFileCacheSize = i;
	dprintf("DynaFileCacheSize changed to %d.\n", i);

	*pp = p;
}


/* Parse and interpret an on/off inside a config file line. This is most
 * often used for boolean options, but of course it may also be used
 * for other things. The passed-in pointer is updated to point to
 * the first unparsed character on exit. Function emits error messages
 * if the value is neither on or off. It returns 0 if the option is off,
 * 1 if it is on and another value if there was an error.
 * rgerhards, 2007-07-15
 */
static int doParseOnOffOption(uchar **pp)
{
	uchar *pOptStart;
	uchar szOpt[32];

	assert(pp != NULL);
	assert(*pp != NULL);

	pOptStart = *pp;
	skipWhiteSpace(pp); /* skip over any whitespace */

	if(getSubString(pp, (char*) szOpt, sizeof(szOpt) / sizeof(uchar), ' ')  != 0) {
		logerror("Invalid $-configline - could not extract on/off option");
		return -1;
	}
	
	if(!strcmp((char*)szOpt, "on")) {
		return 1;
	} else if(!strcmp((char*)szOpt, "off")) {
		return 0;
	} else {
		logerrorSz("Option value must be on or off, but is '%s'", (char*)pOptStart);
		return -1;
	}
}


/* Parse and process an binary cofig option. pVal must be
 * a pointer to an integer which is to receive the option
 * value.
 * rgerhards, 2007-07-15
 */
static void doBinaryOptionLine(uchar **pp, int *pVal)
{
	int iOption;

	assert(pp != NULL);
	assert(*pp != NULL);
	assert(pVal != NULL);

	if((iOption = doParseOnOffOption(pp)) == -1)
		return;	/* nothing left to do */
	
	*pVal = iOption;
	skipWhiteSpace(pp); /* skip over any whitespace */
}


/* process a $ModLoad config line.
 * As of now, it is a dummy, that will later evolve into the
 * loader for plug-ins.
 * rgerhards, 2007-07-21
 */
static void doModLoad(uchar **pp)
{
	uchar szName[512];

	assert(pp != NULL);
	assert(*pp != NULL);

	if(getSubString(pp, (char*) szName, sizeof(szName) / sizeof(uchar), ' ')  != 0) {
		logerror("could not extract group name");
		return;
	}

	dprintf("Requested to load module '%s'\n", szName);

	if(!strcmp((char*)szName, "MySQL")) {
		bModMySQLLoaded = 1;
	} else {
		logerrorSz("$ModLoad with invalid module name '%s' - currently 'MySQL' only supported",
			   (char*) szName);
	}

	skipWhiteSpace(pp); /* skip over any whitespace */
}


/* extract a groupname and return its gid.
 * rgerhards, 2007-07-17
 */
static void doGetGID(uchar **pp, gid_t *pGid)
{
	struct group *pgBuf;
	struct group gBuf;
	uchar szName[256];
	char stringBuf[2048];	/* I hope this is large enough... */

	assert(pp != NULL);
	assert(*pp != NULL);
	assert(pGid != NULL);

	if(getSubString(pp, (char*) szName, sizeof(szName) / sizeof(uchar), ' ')  != 0) {
		logerror("could not extract group name");
		return;
	}

	getgrnam_r((char*)szName, &gBuf, stringBuf, sizeof(stringBuf), &pgBuf);

	if(pgBuf == NULL) {
		logerrorSz("ID for group '%s' could not be found or error", (char*)szName);
	} else {
		*pGid = pgBuf->gr_gid;
		dprintf("gid %d obtained for group '%s'\n", *pGid, szName);
	}

	skipWhiteSpace(pp); /* skip over any whitespace */
}


/* extract a username and return its uid.
 * rgerhards, 2007-07-17
 */
static void doGetUID(uchar **pp, uid_t *pUid)
{
	struct passwd *ppwBuf;
	struct passwd pwBuf;
	uchar szName[256];
	char stringBuf[2048];	/* I hope this is large enough... */

	assert(pp != NULL);
	assert(*pp != NULL);
	assert(pUid != NULL);

	if(getSubString(pp, (char*) szName, sizeof(szName) / sizeof(uchar), ' ')  != 0) {
		logerror("could not extract user name");
		return;
	}

	getpwnam_r((char*)szName, &pwBuf, stringBuf, sizeof(stringBuf), &ppwBuf);

	if(ppwBuf == NULL) {
		logerrorSz("ID for user '%s' could not be found or error", (char*)szName);
	} else {
		*pUid = ppwBuf->pw_uid;
		dprintf("uid %d obtained for user '%s'\n", *pUid, szName);
	}

	skipWhiteSpace(pp); /* skip over any whitespace */
}


/* parse the control character escape prefix and store it.
 * added 2007-07-17 by rgerhards
 */
static void doControlCharEscPrefix(uchar **pp)
{
	assert(pp != NULL);
	assert(*pp != NULL);

	skipWhiteSpace(pp); /* skip over any whitespace */

	/* if we are not at a '\0', we have our new char - no validity checks here... */
	if(**pp == '\0') {
		logerror("No Control Character Prefix Character given - ignoring directive");
	} else {
		cCCEscapeChar = **pp;
		++(*pp); /* eat processed char */
	}

	skipWhiteSpace(pp); /* skip over any whitespace */
}


/* Parse and interpet a $FileCreateMode and $umask line. This function
 * pulls the creation mode and, if successful, stores it
 * into the global variable so that the rest of rsyslogd
 * opens files with that mode. Any previous value will be
 * overwritten.
 * HINT: if we store the creation mode in selector_t, we
 * can even specify multiple modes simply be virtue of
 * being placed in the right section of rsyslog.conf
 * rgerhards, 2007-07-4 (happy independence day to my US friends!)
 * Parameter **pp has a pointer to the current config line.
 * On exit, it will be updated to the processed position.
 */
static void doFileCreateModeUmaskLine(uchar **pp, enum eDirective eDir)
{
	uchar *p;
	uchar errMsg[128];	/* for dynamic error messages */
	int iMode;	

	assert(pp != NULL);
	assert(*pp != NULL);
	
	skipWhiteSpace(pp); /* skip over any whitespace */
	p = *pp;

	/* for now, we parse and accept only octal numbers
	 * Sequence of tests is important, we are using boolean shortcuts
	 * to avoid addressing invalid memory!
	 */
	if(!(   (*p == '0')
	     && (*(p+1) && *(p+1) >= '0' && *(p+1) <= '7')
	     && (*(p+2) && *(p+2) >= '0' && *(p+2) <= '7')
	     && (*(p+3) && *(p+3) >= '0' && *(p+3) <= '7')  )  ) {
		snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar),
		         "%s value must be octal (e.g 0644), invalid value '%s'.",
			 eDir == DIR_UMASK ? "umask" : "filecreatemode", p);
		errno = 0;
		logerror((char*) errMsg);
		return;
	}

	/*  we reach this code only if the octal number is ok - so we can now
	 *  compute the value.
	 */
	iMode  = (*(p+1)-'0') * 64 + (*(p+2)-'0') * 8 + (*(p+3)-'0');
	switch(eDir) {
		case DIR_DIRCREATEMODE:
			fDirCreateMode = iMode;
			dprintf("DirCreateMode set to 0%o.\n", iMode);
			break;
		case DIR_FILECREATEMODE:
			fCreateMode = iMode;
			dprintf("FileCreateMode set to 0%o.\n", iMode);
			break;
		case DIR_UMASK:
			umask(iMode);
			dprintf("umask set to 0%3.3o.\n", iMode);
			break;
		default:/* we do this to avoid compiler warning - not all
			 * enum values call this function, so an incomplete list
			 * is quite ok (but then we should not run into this code,
			 * so at least we log a debug warning).
			 */
			dprintf("INTERNAL ERROR: doFileCreateModeUmaskLine() called with invalid eDir %d.\n",
				eDir);
			break;
	}

	p += 4;	/* eat the octal number */
	*pp = p;
}

/* parse and interpret a $-config line that starts with
 * a name (this is common code). It is parsed to the name
 * and then the proper sub-function is called to handle
 * the actual directive.
 * rgerhards 2004-11-17
 * rgerhards 2005-06-21: previously only for templates, now 
 *    generalized.
 */
static void doNameLine(uchar **pp, enum eDirective eDir)
{
	uchar *p;
	char szName[128];

	assert(pp != NULL);
	p = *pp;
	assert(p != NULL);

	if(getSubString(&p, szName, sizeof(szName) / sizeof(char), ',')  != 0) {
		char errMsg[128];
		snprintf(errMsg, sizeof(errMsg)/sizeof(char),
		         "Invalid $%s line: could not extract name - line ignored",
			 directive_name_list[eDir]);
		logerror(errMsg);
		return;
	}
	if(*p == ',')
		++p; /* comma was eaten */
	
	/* we got the name - now we pass name & the rest of the string
	 * to the subfunction. It makes no sense to do further
	 * parsing here, as this is in close interaction with the
	 * respective subsystem. rgerhards 2004-11-17
	 */
	
	switch(eDir) {
		case DIR_TEMPLATE: 
			tplAddLine(szName, &p);
			break;
		case DIR_OUTCHANNEL: 
			ochAddLine(szName, &p);
			break;
		case DIR_ALLOWEDSENDER: 
			addAllowedSenderLine(szName, &p);
			break;
		default:/* we do this to avoid compiler warning - not all
			 * enum values call this function, so an incomplete list
			 * is quite ok (but then we should not run into this code,
			 * so at least we log a debug warning).
			 */
			dprintf("INTERNAL ERROR: doNameLine() called with invalid eDir %d.\n",
				eDir);
			break;
	}

	*pp = p;
	return;
}


/* Parse and interpret a system-directive in the config line
 * A system directive is one that starts with a "$" sign. It offers
 * extended configuration parameters.
 * 2004-11-17 rgerhards
 */
void cfsysline(uchar *p)
{
	uchar szCmd[64];
	uchar errMsg[128];	/* for dynamic error messages */

	assert(p != NULL);
	errno = 0;
	dprintf("cfsysline --> %s", p);
	if(getSubString(&p, (char*) szCmd, sizeof(szCmd) / sizeof(uchar), ' ')  != 0) {
		logerror("Invalid $-configline - could not extract command - line ignored\n");
		return;
	}

	/* check the command and carry out processing */
	if(!strcasecmp((char*) szCmd, "template")) { 
		doNameLine(&p, DIR_TEMPLATE);
	} else if(!strcasecmp((char*) szCmd, "outchannel")) { 
		doNameLine(&p, DIR_OUTCHANNEL);
	} else if(!strcasecmp((char*) szCmd, "allowedsender")) { 
		doNameLine(&p, DIR_ALLOWEDSENDER);
	} else if(!strcasecmp((char*) szCmd, "dircreatemode")) { 
		doFileCreateModeUmaskLine(&p, DIR_DIRCREATEMODE);
	} else if(!strcasecmp((char*) szCmd, "filecreatemode")) { 
		doFileCreateModeUmaskLine(&p, DIR_FILECREATEMODE);
	} else if(!strcasecmp((char*) szCmd, "umask")) { 
		doFileCreateModeUmaskLine(&p, DIR_UMASK);
	} else if(!strcasecmp((char*) szCmd, "dirowner")) { 
		doGetUID(&p, &dirUID);
	} else if(!strcasecmp((char*) szCmd, "dirgroup")) { 
		doGetGID(&p, &dirGID);
	} else if(!strcasecmp((char*) szCmd, "fileowner")) { 
		doGetUID(&p, &fileUID);
	} else if(!strcasecmp((char*) szCmd, "filegroup")) { 
		doGetGID(&p, &fileGID);
	} else if(!strcasecmp((char*) szCmd, "dynafilecachesize")) { 
		doDynaFileCacheSizeLine(&p);
	} else if(!strcasecmp((char*) szCmd, "repeatedmsgreduction")) { 
		doBinaryOptionLine(&p, &bReduceRepeatMsgs);
	} else if(!strcasecmp((char*) szCmd, "controlcharacterescapeprefix")) { 
		doControlCharEscPrefix(&p);
	} else if(!strcasecmp((char*) szCmd, "escapecontrolcharactersonreceive")) { 
		doBinaryOptionLine(&p, &bEscapeCCOnRcv);
	} else if(!strcasecmp((char*) szCmd, "dropmsgswithmaliciousdnsptrrecords")) { 
		doBinaryOptionLine(&p, &bDropMalPTRMsgs);
	} else if(!strcasecmp((char*) szCmd, "createdirs")) { 
		doBinaryOptionLine(&p, &bCreateDirs);
	} else if(!strcasecmp((char*) szCmd, "debugprinttemplatelist")) { 
		doBinaryOptionLine(&p, &bDebugPrintTemplateList);
	} else if(!strcasecmp((char*) szCmd, "failonchownfailure")) { 
		doBinaryOptionLine(&p, &bFailOnChown);
	} else if(!strcasecmp((char*) szCmd, "droptrailinglfonreception")) { 
		doBinaryOptionLine(&p, &bDropTrailingLF);
	} else if(!strcasecmp((char*) szCmd, "resetconfigvariables")) { 
		resetConfigVariables();
	} else if(!strcasecmp((char*) szCmd, "modload")) { 
		doModLoad(&p);
	} else { /* invalid command! */
		char err[100];
		snprintf(err, sizeof(err)/sizeof(char),
		         "Invalid command in $-configline: '%s' - line ignored\n", szCmd);
		logerror(err);
		return;
	}

	/* now check if we have some extra characters left on the line - that
	 * should not be the case. Whitespace is OK, but everything else should
	 * trigger a warning (that may be an indication of undesired behaviour).
	 * An exception, of course, are comments (starting with '#').
	 * rgerhards, 2007-07-04
	 */
	skipWhiteSpace(&p);

	if(*p && *p != '#') { /* we have a non-whitespace, so let's complain */
		snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar),
		         "error: extra characters in config line ignored: '%s'", p);
		errno = 0;
		logerror((char*) errMsg);
	}
}


/*  Close all open log files and free selector descriptor array.
 */
static void freeSelectors(void)
{
	selector_t *f;
	selector_t *fPrev;

	Initialized = 0;
	if(Files != NULL) {
		dprintf("Freeing log structures.\n");

		f = Files;
		while (f != NULL) {
			/* flush any pending output */
			if (f->f_prevcount) {
				fprintlog(f);
			}

			/* free iovec if it was allocated */
			if(f->f_iov != NULL) {
				if(f->f_bMustBeFreed != NULL) {
					iovDeleteFreeableStrings(f);
					free(f->f_bMustBeFreed);
				}
				free(f->f_iov);
			}

			/* free iov string */
			if (f->f_psziov != NULL)
				free(f->f_psziov);

			/* free the action instances */
			f->pMod->freeInstance(f);
#			ifdef USE_PTHREADS
			/* delete any mutex objects, if present */
			if(   (   (f->f_type == F_FORW_SUSP)
			       || (f->f_type == F_FORW)
			       || (f->f_type == F_FORW_UNKN) )
			   && (f->f_un.f_forw.protocol == FORW_TCP)) {
				pthread_mutex_destroy(&f->f_un.f_forw.mtxTCPSend);
			}
#			endif
			if(f->f_pMsg != NULL)
				MsgDestruct(f->f_pMsg);

			/* done with this entry, we now need to delete itself */
			fPrev = f;
			f = f->f_next;
			free(fPrev);
		}

		/* Reflect the deletion of the selectors linked list. */
		Files = NULL;
	}
}


/* INIT -- Initialize syslogd from configuration table
 * init() is called at initial startup AND each time syslogd is HUPed
 */
static void init()
{
	register int i;
	register FILE *cf;
	register selector_t *f;
	register selector_t *nextp;
	register char *p;
	register unsigned int Forwarding = 0;
#ifdef CONT_LINE
	char cbuf[BUFSIZ];
	char *cline;
#else
	char cline[BUFSIZ];
#endif
	char bufStartUpMsg[512];
	struct servent *sp;

	/* initialize some static variables */
	pDfltHostnameCmp = NULL;
	pDfltProgNameCmp = NULL;
	eDfltHostnameCmpMode = HN_NO_COMP;

#ifdef SYSLOG_INET
	if (restart) {
		if (pAllowedSenders_UDP != NULL) {
			clearAllowedSenders (pAllowedSenders_UDP);
			pAllowedSenders_UDP = NULL;
		}
		
		if (pAllowedSenders_TCP != NULL) {
			clearAllowedSenders (pAllowedSenders_TCP);
			pAllowedSenders_TCP = NULL;
		}
	}

	assert (pAllowedSenders_UDP == NULL &&
		pAllowedSenders_TCP == NULL );
#endif
	nextp = NULL;
	/* I was told by an IPv6 expert that calling getservbyname() seems to be
	 * still valid, at least for the use case we have. So I re-enabled that
	 * code. rgerhards, 2007-07-02
	 */
        if(!strcmp(LogPort, "0")) {
                /* we shall use the default syslog/udp port, so let's
                 * look it up.
                 */
                sp = getservbyname("syslog", "udp");
                if (sp == NULL) {
                        errno = 0;
                        logerror("Could not find syslog/udp port in /etc/services. "
                                 "Now using IANA-assigned default of 514.");
                        LogPort = "514";
                } else {
			/* we can dynamically allocate memory here and do NOT need
			 * to care about freeing it because even though init() is
			 * called on each restart, the LogPort can never again be
			 * "0". So we will only once run into this part of the code
			 * here. rgerhards, 2007-07-02
			 * We save ourselfs the hassle of dynamic memory management
			 * for the very same reason.
			 */
			static char defPort[8];
			snprintf(defPort, sizeof(defPort) * sizeof(char), "%d", ntohs(sp->s_port));
                        LogPort = defPort;
		}
        }

	dprintf("Called init.\n");

	/*  Close all open log files and free log descriptor array. */
	freeSelectors();

	dprintf("Clearing templates.\n");
	tplDeleteNew();
	
	/* re-setting values to defaults (where applicable) */
	resetConfigVariables();

	f = NULL;
	nextp = NULL;

	/* open the configuration file */
	if ((cf = fopen(ConfFile, "r")) == NULL) {
		/* rgerhards: this code is executed to set defaults when the
		 * config file could not be opened. We might think about
		 * abandoning the run in this case - but this, too, is not
		 * very clever... So we stick with what we have.
		 */
		dprintf("cannot open %s (%s).\n", ConfFile, strerror(errno));
		nextp = (selector_t *)calloc(1, sizeof(selector_t));
		Files = nextp; /* set the root! */
		cfline("*.ERR\t" _PATH_CONSOLE, nextp);
		nextp->f_next = (selector_t *)calloc(1, sizeof(selector_t));
		cfline("*.PANIC\t*", nextp->f_next);
		nextp->f_next = (selector_t *)calloc(1, sizeof(selector_t));
		snprintf(cbuf,sizeof(cbuf), "*.*\t%s", ttyname(0));
		cfline(cbuf, nextp->f_next);
		Initialized = 1;
	}
	else { /* we should consider moving this into a separate function, its lengthy... */
		/*
		 *  Foreach line in the conf table, open that file.
		 */
	#if CONT_LINE
		cline = cbuf;
		while (fgets(cline, sizeof(cbuf) - (cline - cbuf), cf) != NULL) {
	#else
		while (fgets(cline, sizeof(cline), cf) != NULL) {
	#endif
			/*
			 * check for end-of-section, comments, strip off trailing
			 * spaces and newline character.
			 */
			for (p = cline; isspace((int) *p); ++p) /*SKIP SPACES*/;
			if (*p == '\0' || *p == '#')
				continue;

			if(*p == '$') {
				cfsysline((uchar*) ++p);
				continue;
			}
	#if CONT_LINE
			strcpy(cline, p);
	#endif
			for (p = strchr(cline, '\0'); isspace((int) *--p););
	#if CONT_LINE
			if (*p == '\\') {
				if ((p - cbuf) > BUFSIZ - 30) {
					/* Oops the buffer is full - what now? */
					cline = cbuf;
				} else {
					*p = 0;
					cline = p;
					continue;
				}
			}  else
				cline = cbuf;
	#endif
			*++p = '\0';

			/* allocate next entry and add it */
			f = (selector_t *)calloc(1, sizeof(selector_t));
			/* TODO: check for NULL pointer (this is a general issue in this code...)! */

			/* be careful: the default below must be set BEFORE calling cfline()! */
			f->f_un.f_file.f_sizeLimit = 0; /* default value, use outchannels to configure! */
	#if CONT_LINE
			if(cfline(cbuf, f) != RS_RET_OK) {
	#else
			if(cfline(cline, f) != RS_RET_OK) {
	#endif
				/* creation of the entry failed, we need to discard it */
				dprintf("selector line NOT successfully processed\n");
				free(f); 
			} else {
				/* successfully created an entry */
				dprintf("selector line successfully processed\n");
				if(nextp == NULL) {
					Files = f;
				}
				else {
					nextp->f_next = f;
				}
				nextp = f;
				if (f->f_type == F_FORW || f->f_type == F_FORW_SUSP || f->f_type == F_FORW_UNKN) {
					Forwarding++;
				}
			}
		}

		/* close the configuration file */
		(void) fclose(cf);
	}

	/* we are now done with reading the configuraton. This is the right time to
	 * free some objects that were just needed for loading it. rgerhards 2005-10-19
	 */
	if(pDfltHostnameCmp != NULL) {
		rsCStrDestruct(pDfltHostnameCmp);
		pDfltHostnameCmp = NULL;
	}

	if(pDfltProgNameCmp != NULL) {
		rsCStrDestruct(pDfltProgNameCmp);
		pDfltProgNameCmp = NULL;
	}


#ifdef SYSLOG_UNIXAF
	for (i = startIndexUxLocalSockets ; i < nfunix ; i++) {
		if (funix[i] != -1)
			/* Don't close the socket, preserve it instead
			close(funix[i]);
			*/
			continue;
		if ((funix[i] = create_unix_socket(funixn[i])) != -1)
			dprintf("Opened UNIX socket `%s' (fd %d).\n", funixn[i], funix[i]);
	}
#endif

#ifdef SYSLOG_INET
	/* I have moved initializing UDP sockets before the TCP sockets. This ensures
	 * they are as soon ready for reception as possible. Of course, it is only a 
	 * very small window of exposure, but it doesn't hurt to limit the message
	 * loss risk to as low as possible - especially if it costs nothing...
	 * rgerhards, 2007-06-28
	 */
	if(Forwarding || AcceptRemote) {
		if (finet == NULL) {
			if((finet = create_udp_socket()) != NULL)
				dprintf("Opened %d syslog UDP port(s).\n", *finet);
		}
	}
	else {
		/* this case can happen during HUP processing. */
		closeUDPListenSockets();
	}

	if (bEnableTCP) {
		if(sockTCPLstn == NULL) {
			/* even when doing a re-init, we do not shut down and
			 * re-open the TCP socket. That would break existing TCP
			 * session, which we do not desire. Should at some time arise
			 * need to do that, I recommend controlling that via a
			 * user-selectable option. rgerhards, 2007-06-21
			 */
			if((sockTCPLstn = create_tcp_socket()) != NULL) {
				dprintf("Opened %d syslog TCP port(s).\n", *sockTCPLstn);
			}
		}
	}
#endif

	Initialized = 1;

	if(Debug) {
		printf("Active selectors:\n");
		for (f = Files; f != NULL ; f = f->f_next) {
			if (1) {
				if(f->pCSProgNameComp != NULL)
					printf("tag: '%s'\n", rsCStrGetSzStr(f->pCSProgNameComp));
				if(f->eHostnameCmpMode != HN_NO_COMP)
					printf("hostname: %s '%s'\n",
						f->eHostnameCmpMode == HN_COMP_MATCH ?
							"only" : "allbut",
						rsCStrGetSzStr(f->pCSHostnameComp));
				if(f->f_filter_type == FILTER_PRI) {
					for (i = 0; i <= LOG_NFACILITIES; i++)
						if (f->f_filterData.f_pmask[i] == TABLE_NOPRI)
							printf(" X ");
						else
							printf("%2X ", f->f_filterData.f_pmask[i]);
				} else {
					printf("PROPERTY-BASED Filter:\n");
					printf("\tProperty.: '%s'\n",
					       rsCStrGetSzStr(f->f_filterData.prop.pCSPropName));
					printf("\tOperation: ");
					if(f->f_filterData.prop.isNegated)
						printf("NOT ");
					printf("'%s'\n", getFIOPName(f->f_filterData.prop.operation));
					printf("\tValue....: '%s'\n",
					       rsCStrGetSzStr(f->f_filterData.prop.pCSCompValue));
					printf("\tAction...: ");
				}
				printf("%s: ", modGetStateName(f->pMod));
				switch (f->f_type) {
				case F_FILE:
				case F_PIPE:
				case F_TTY:
				case F_CONSOLE:
					if(f->f_un.f_file.bDynamicName) {
						printf("[dynamic]\n\ttemplate='%s'\n"
						       "\tfile cache size=%d\n"
						       "\tcreate directories: %s\n"
						       "\tfile owner %d, group %d\n"
						       "\tdirectory owner %d, group %d\n"
						       "\tfail if owner/group can not be set: %s\n",
							f->f_un.f_file.f_fname,
							f->f_un.f_file.iDynaFileCacheSize,
							f->f_un.f_file.bCreateDirs ? "yes" : "no",
							f->f_un.f_file.fileUID, f->f_un.f_file.fileGID,
							f->f_un.f_file.dirUID, f->f_un.f_file.dirGID,
							f->f_un.f_file.bFailOnChown ? "yes" : "no"
							);
					} else { /* regular file */
						printf("%s", f->f_un.f_file.f_fname);
						if (f->f_file == -1)
							printf(" (unused)");
					}
					break;

				case F_SHELL:
					printf("%s", f->f_un.f_file.f_fname);
					break;

				case F_FORW:
				case F_FORW_SUSP:
				case F_FORW_UNKN:
					printf("%s", f->f_un.f_forw.f_hname);
					break;

				case F_USERS:
					for (i = 0; i < MAXUNAMES && *f->f_un.f_uname[i]; i++)
						printf("%s, ", f->f_un.f_uname[i]);
					break;
				}
				if(f->f_ReduceRepeated)
					printf(" [RepeatedMsgReduction]");
				if(f->bEnabled == 0)
					printf(" [disabled]");
				printf("\n");
			}
		}
		printf("\n");
		if(bDebugPrintTemplateList)
			tplPrintList();
		modPrintList();
		ochPrintList();

#ifdef	SYSLOG_INET
		/* now the allowedSender lists: */
		PrintAllowedSenders(1); /* UDP */
		PrintAllowedSenders(2); /* TCP */
		printf("\n");
#endif 	/* #ifdef SYSLOG_INET */

		printf("Messages with malicious PTR DNS Records are %sdropped.\n",
			bDropMalPTRMsgs	? "" : "not ");

		printf("Control characters are %sreplaced upon reception.\n",
				bEscapeCCOnRcv? "" : "not ");
		if(bEscapeCCOnRcv)
			printf("Control character escape sequence prefix is '%c'.\n",
				cCCEscapeChar);
	}

	/* we now generate the startup message. It now includes everything to
	 * identify this instance.
	 * rgerhards, 2005-08-17
	 */
	snprintf(bufStartUpMsg, sizeof(bufStartUpMsg)/sizeof(char), 
		 " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \
		 "\" x-pid=\"%d\"][x-configInfo udpReception=\"%s\" " \
		 "udpPort=\"%s\" tcpReception=\"%s\" tcpPort=\"%s\"]" \
		 " restart",
		 (int) myPid,
#ifdef	SYSLOG_INET
		 AcceptRemote ? "Yes" : "No", LogPort,
		 bEnableTCP   ? "Yes" : "No", TCPLstnPort
#else
		"No", "0", "No", "0"
#endif 	/* #ifdef SYSLOG_INET */
		);
	logmsgInternal(LOG_SYSLOG|LOG_INFO, bufStartUpMsg, ADDDATE);

	(void) signal(SIGHUP, sighup_handler);
	dprintf(" restarted.\n");
}

/* helper to cfline() and its helpers. Assign the right template
 * to a filed entry and allocates memory for its iovec.
 * rgerhards 2004-11-19
 */
rsRetVal cflineSetTemplateAndIOV(selector_t *f, char *pTemplateName)
{
	rsRetVal iRet = RS_RET_OK;
	char errMsg[512];

	assert(f != NULL);
	assert(pTemplateName != NULL);

	/* Ok, we got everything, so it now is time to look up the
	 * template (Hint: templates MUST be defined before they are
	 * used!) and initialize the pointer to it PLUS the iov 
	 * pointer. We do the later because the template tells us
	 * how many elements iov must have - and this can never change.
	 */
	if((f->f_pTpl = tplFind(pTemplateName, strlen(pTemplateName))) == NULL) {
		snprintf(errMsg, sizeof(errMsg) / sizeof(char),
			 " Could not find template '%s' - selector line disabled\n",
			 pTemplateName);
		errno = 0;
		logerror(errMsg);
		iRet = RS_RET_NOT_FOUND;
	} else {
		if((f->f_iov = calloc(tplGetEntryCount(f->f_pTpl),
		    sizeof(struct iovec))) == NULL) {
			errno = 0;
			logerror("Could not allocate iovec memory - 1 selector line disabled\n");
			iRet = RS_RET_ERR;
		}
		if((f->f_bMustBeFreed = calloc(tplGetEntryCount(f->f_pTpl),
		    sizeof(unsigned short))) == NULL) {
			errno = 0;
			logerror("Could not allocate bMustBeFreed memory - 1 selector line disabled\n");
			iRet = RS_RET_ERR;
		}
	}
	return iRet;
}
	
/* Helper to cfline() and its helpers. Parses a template name
 * from an "action" line. Must be called with the Line pointer
 * pointing to the first character after the semicolon.
 * Everything is stored in the filed struct. If there is no
 * template name (it is empty), than it is ensured that the
 * returned string is "\0". So you can count on the first character
 * to be \0 in this case.
 * rgerhards 2004-11-19
 */
rsRetVal cflineParseTemplateName(uchar** pp,
			     register char* pTemplateName, int iLenTemplate)
{
	register uchar *p;
	rsRetVal iRet = RS_RET_OK;
	int i;

	assert(pp != NULL);
	assert(*pp != NULL);

	p =*pp;

	/* Just as a general precaution, we skip whitespace.  */
	while(*p && isspace((int) *p))
		++p;

	i = 1; /* we start at 1 so that we reserve space for the '\0'! */
	while(*p && i < iLenTemplate) {
		*pTemplateName++ = *p++;
		++i;
	}
	*pTemplateName = '\0';

	*pp = p;

	return iRet;
}

/* Helper to cfline(). Parses a file name up until the first
 * comma and then looks for the template specifier. Tries
 * to find that template. Everything is stored in the
 * filed struct.
 * rgerhards 2004-11-18
 */
rsRetVal cflineParseFileName(selector_t *f, uchar* p)
{
	register char *pName;
	int i;
	rsRetVal iRet = RS_RET_OK;
	char szTemplateName[128];	/* should be more than sufficient */

	/* TODO: below is problematic  from modularization standpoint */
	if(*p == '|') {
		f->f_type = F_PIPE;
		++p;
	} else {
		f->f_type = F_FILE;
	}

	pName = f->f_un.f_file.f_fname;
	i = 1; /* we start at 1 so that we reseve space for the '\0'! */
	while(*p && *p != ';' && i < MAXFNAME) {
		*pName++ = *p++;
		++i;
	}
	*pName = '\0';

	/* got the file name - now let's look for the template to use
	 * Just as a general precaution, we skip whitespace.
	 */
	while(*p && isspace((int) *p))
		++p;
	if(*p == ';')
		++p; /* eat it */

	if((iRet = cflineParseTemplateName(&p, szTemplateName,
	                        sizeof(szTemplateName) / sizeof(char))) != RS_RET_OK)
		return iRet;

	if(szTemplateName[0] == '\0')	/* no template? */
		strcpy(szTemplateName, " TradFmt"); /* use default! */

	if((iRet = cflineSetTemplateAndIOV(f, szTemplateName)) == RS_RET_OK)
		dprintf("filename: '%s', template: '%s'\n", f->f_un.f_file.f_fname, szTemplateName);

	return iRet;
}


/*
 * Helper to cfline(). This function takes the filter part of a traditional, PRI
 * based line and decodes the PRIs given in the selector line. It processed the
 * line up to the beginning of the action part. A pointer to that beginnig is
 * passed back to the caller.
 * rgerhards 2005-09-15
 */
static rsRetVal cflineProcessTradPRIFilter(uchar **pline, register selector_t *f)
{
	uchar *p;
	register uchar *q;
	register int i, i2;
	uchar *bp;
	int pri;
	int singlpri = 0;
	int ignorepri = 0;
	uchar buf[MAXLINE];
	uchar xbuf[200];

	assert(pline != NULL);
	assert(*pline != NULL);
	assert(f != NULL);

	dprintf(" - traditional PRI filter\n");
	errno = 0;	/* keep strerror() stuff out of logerror messages */

	f->f_filter_type = FILTER_PRI;
	/* Note: file structure is pre-initialized to zero because it was
	 * created with calloc()!
	 */
	for (i = 0; i <= LOG_NFACILITIES; i++) {
		f->f_filterData.f_pmask[i] = TABLE_NOPRI;
		f->f_flags = 0;
	}

	/* scan through the list of selectors */
	for (p = *pline; *p && *p != '\t' && *p != ' ';) {

		/* find the end of this facility name list */
		for (q = p; *q && *q != '\t' && *q++ != '.'; )
			continue;

		/* collect priority name */
		for (bp = buf; *q && !strchr("\t ,;", *q); )
			*bp++ = *q++;
		*bp = '\0';

		/* skip cruft */
		while (strchr(",;", *q))
			q++;

		/* decode priority name */
		if ( *buf == '!' ) {
			ignorepri = 1;
			for (bp=buf; *(bp+1); bp++)
				*bp=*(bp+1);
			*bp='\0';
		}
		else {
			ignorepri = 0;
		}
		if ( *buf == '=' )
		{
			singlpri = 1;
			pri = decode(&buf[1], PriNames);
		}
		else {
		        singlpri = 0;
			pri = decode(buf, PriNames);
		}

		if (pri < 0) {
			snprintf((char*) xbuf, sizeof(xbuf), "unknown priority name \"%s\"", buf);
			logerror((char*) xbuf);
			return RS_RET_ERR;
		}

		/* scan facilities */
		while (*p && !strchr("\t .;", *p)) {
			for (bp = buf; *p && !strchr("\t ,;.", *p); )
				*bp++ = *p++;
			*bp = '\0';
			if (*buf == '*') {
				for (i = 0; i <= LOG_NFACILITIES; i++) {
					if ( pri == INTERNAL_NOPRI ) {
						if ( ignorepri )
							f->f_filterData.f_pmask[i] = TABLE_ALLPRI;
						else
							f->f_filterData.f_pmask[i] = TABLE_NOPRI;
					}
					else if ( singlpri ) {
						if ( ignorepri )
				  			f->f_filterData.f_pmask[i] &= ~(1<<pri);
						else
				  			f->f_filterData.f_pmask[i] |= (1<<pri);
					}
					else
					{
						if ( pri == TABLE_ALLPRI ) {
							if ( ignorepri )
								f->f_filterData.f_pmask[i] = TABLE_NOPRI;
							else
								f->f_filterData.f_pmask[i] = TABLE_ALLPRI;
						}
						else
						{
							if ( ignorepri )
								for (i2= 0; i2 <= pri; ++i2)
									f->f_filterData.f_pmask[i] &= ~(1<<i2);
							else
								for (i2= 0; i2 <= pri; ++i2)
									f->f_filterData.f_pmask[i] |= (1<<i2);
						}
					}
				}
			} else {
				i = decode(buf, FacNames);
				if (i < 0) {

					snprintf((char*) xbuf, sizeof(xbuf), "unknown facility name \"%s\"", buf);
					logerror((char*) xbuf);
					return RS_RET_ERR;
				}

				if ( pri == INTERNAL_NOPRI ) {
					if ( ignorepri )
						f->f_filterData.f_pmask[i >> 3] = TABLE_ALLPRI;
					else
						f->f_filterData.f_pmask[i >> 3] = TABLE_NOPRI;
				} else if ( singlpri ) {
					if ( ignorepri )
						f->f_filterData.f_pmask[i >> 3] &= ~(1<<pri);
					else
						f->f_filterData.f_pmask[i >> 3] |= (1<<pri);
				} else {
					if ( pri == TABLE_ALLPRI ) {
						if ( ignorepri )
							f->f_filterData.f_pmask[i >> 3] = TABLE_NOPRI;
						else
							f->f_filterData.f_pmask[i >> 3] = TABLE_ALLPRI;
					} else {
						if ( ignorepri )
							for (i2= 0; i2 <= pri; ++i2)
								f->f_filterData.f_pmask[i >> 3] &= ~(1<<i2);
						else
							for (i2= 0; i2 <= pri; ++i2)
								f->f_filterData.f_pmask[i >> 3] |= (1<<i2);
					}
				}
			}
			while (*p == ',' || *p == ' ')
				p++;
		}

		p = q;
	}

	/* skip to action part */
	while (*p == '\t' || *p == ' ')
		p++;

	*pline = p;
	return RS_RET_OK;
}


/*
 * Helper to cfline(). This function takes the filter part of a property
 * based filter and decodes it. It processes the line up to the beginning
 * of the action part. A pointer to that beginnig is passed back to the caller.
 * rgerhards 2005-09-15
 */
static rsRetVal cflineProcessPropFilter(uchar **pline, register selector_t *f)
{
	rsParsObj *pPars;
	rsCStrObj *pCSCompOp;
	rsRetVal iRet;
	int iOffset; /* for compare operations */

	assert(pline != NULL);
	assert(*pline != NULL);
	assert(f != NULL);

	dprintf(" - property-based filter\n");
	errno = 0;	/* keep strerror() stuff out of logerror messages */

	f->f_filter_type = FILTER_PROP;

	/* create parser object starting with line string without leading colon */
	if((iRet = rsParsConstructFromSz(&pPars, (*pline)+1)) != RS_RET_OK) {
		logerrorInt("Error %d constructing parser object - ignoring selector", iRet);
		return(iRet);
	}

	/* read property */
	iRet = parsDelimCStr(pPars, &f->f_filterData.prop.pCSPropName, ',', 1, 1);
	if(iRet != RS_RET_OK) {
		logerrorInt("error %d parsing filter property - ignoring selector", iRet);
		rsParsDestruct(pPars);
		return(iRet);
	}

	/* read operation */
	iRet = parsDelimCStr(pPars, &pCSCompOp, ',', 1, 1);
	if(iRet != RS_RET_OK) {
		logerrorInt("error %d compare operation property - ignoring selector", iRet);
		rsParsDestruct(pPars);
		return(iRet);
	}

	/* we now first check if the condition is to be negated. To do so, we first
	 * must make sure we have at least one char in the param and then check the
	 * first one.
	 * rgerhards, 2005-09-26
	 */
	if(rsCStrLen(pCSCompOp) > 0) {
		if(*rsCStrGetBufBeg(pCSCompOp) == '!') {
			f->f_filterData.prop.isNegated = 1;
			iOffset = 1; /* ignore '!' */
		} else {
			f->f_filterData.prop.isNegated = 0;
			iOffset = 0;
		}
	} else {
		f->f_filterData.prop.isNegated = 0;
		iOffset = 0;
	}

	if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (uchar*) "contains", 8)) {
		f->f_filterData.prop.operation = FIOP_CONTAINS;
	} else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (uchar*) "isequal", 7)) {
		f->f_filterData.prop.operation = FIOP_ISEQUAL;
	} else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (uchar*) "startswith", 10)) {
		f->f_filterData.prop.operation = FIOP_STARTSWITH;
	} else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (unsigned char*) "regex", 5)) {
		f->f_filterData.prop.operation = FIOP_REGEX;
	} else {
		logerrorSz("error: invalid compare operation '%s' - ignoring selector",
		           (char*) rsCStrGetSzStr(pCSCompOp));
	}
	rsCStrDestruct (pCSCompOp); /* no longer needed */

	/* read compare value */
	iRet = parsQuotedCStr(pPars, &f->f_filterData.prop.pCSCompValue);
	if(iRet != RS_RET_OK) {
		logerrorInt("error %d compare value property - ignoring selector", iRet);
		rsParsDestruct(pPars);
		return(iRet);
	}

	/* skip to action part */
	if((iRet = parsSkipWhitespace(pPars)) != RS_RET_OK) {
		logerrorInt("error %d skipping to action part - ignoring selector", iRet);
		rsParsDestruct(pPars);
		return(iRet);
	}

	/* cleanup */
	*pline = *pline + rsParsGetParsePointer(pPars) + 1;
		/* we are adding one for the skipped initial ":" */

	return rsParsDestruct(pPars);
}


/*
 * Helper to cfline(). This function interprets a BSD host selector line
 * from the config file ("+/-hostname"). It stores it for further reference.
 * rgerhards 2005-10-19
 */
static rsRetVal cflineProcessHostSelector(uchar **pline)
{
	rsRetVal iRet;

	assert(pline != NULL);
	assert(*pline != NULL);
	assert(**pline == '-' || **pline == '+');

	dprintf(" - host selector line\n");

	/* check include/exclude setting */
	if(**pline == '+') {
		eDfltHostnameCmpMode = HN_COMP_MATCH;
	} else { /* we do not check for '-', it must be, else we wouldn't be here */
		eDfltHostnameCmpMode = HN_COMP_NOMATCH;
	}
	(*pline)++;	/* eat + or - */

	/* the below is somewhat of a quick hack, but it is efficient (this is
	 * why it is in here. "+*" resets the tag selector with BSD syslog. We mimic
	 * this, too. As it is easy to check that condition, we do not fire up a
	 * parser process, just make sure we do not address beyond our space.
	 * Order of conditions in the if-statement is vital! rgerhards 2005-10-18
	 */
	if(**pline != '\0' && **pline == '*' && *(*pline+1) == '\0') {
		dprintf("resetting BSD-like hostname filter\n");
		eDfltHostnameCmpMode = HN_NO_COMP;
		if(pDfltHostnameCmp != NULL) {
			if((iRet = rsCStrSetSzStr(pDfltHostnameCmp, NULL)) != RS_RET_OK)
				return(iRet);
			pDfltHostnameCmp = NULL;
		}
	} else {
		dprintf("setting BSD-like hostname filter to '%s'\n", *pline);
		if(pDfltHostnameCmp == NULL) {
			/* create string for parser */
			if((iRet = rsCStrConstructFromszStr(&pDfltHostnameCmp, *pline)) != RS_RET_OK)
				return(iRet);
		} else { /* string objects exists, just update... */
			if((iRet = rsCStrSetSzStr(pDfltHostnameCmp, *pline)) != RS_RET_OK)
				return(iRet);
		}
	}
	return RS_RET_OK;
}


/*
 * Helper to cfline(). This function interprets a BSD tag selector line
 * from the config file ("!tagname"). It stores it for further reference.
 * rgerhards 2005-10-18
 */
static rsRetVal cflineProcessTagSelector(uchar **pline)
{
	rsRetVal iRet;

	assert(pline != NULL);
	assert(*pline != NULL);
	assert(**pline == '!');

	dprintf(" - programname selector line\n");

	(*pline)++;	/* eat '!' */

	/* the below is somewhat of a quick hack, but it is efficient (this is
	 * why it is in here. "!*" resets the tag selector with BSD syslog. We mimic
	 * this, too. As it is easy to check that condition, we do not fire up a
	 * parser process, just make sure we do not address beyond our space.
	 * Order of conditions in the if-statement is vital! rgerhards 2005-10-18
	 */
	if(**pline != '\0' && **pline == '*' && *(*pline+1) == '\0') {
		dprintf("resetting programname filter\n");
		if(pDfltProgNameCmp != NULL) {
			if((iRet = rsCStrSetSzStr(pDfltProgNameCmp, NULL)) != RS_RET_OK)
				return(iRet);
			pDfltProgNameCmp = NULL;
		}
	} else {
		dprintf("setting programname filter to '%s'\n", *pline);
		if(pDfltProgNameCmp == NULL) {
			/* create string for parser */
			if((iRet = rsCStrConstructFromszStr(&pDfltProgNameCmp, *pline)) != RS_RET_OK)
				return(iRet);
		} else { /* string objects exists, just update... */
			if((iRet = rsCStrSetSzStr(pDfltProgNameCmp, *pline)) != RS_RET_OK)
				return(iRet);
		}
	}
	return RS_RET_OK;
}


/*
 * Crack a configuration file line
 * rgerhards 2004-11-17: well, I somewhat changed this function. It now does NOT
 * handle config lines in general, but only lines that reflect actual filter
 * pairs (the original syslog message line format). Extended lines (those starting
 * with "$" have been filtered out by the caller and are passed to another function (cfsysline()).
 * Please note, however, that I needed to make changes in the line syntax to support
 * assignment of format definitions to a file. So it is not (yet) 100% transparent.
 * Eventually, we can overcome this limitation by prefixing the actual action indicator
 * (e.g. "/file..") by something (e.g. "$/file..") - but for now, we just modify it... 
 */
static rsRetVal cfline(char *line, register selector_t *f)
{
	uchar *p;
	rsRetVal iRet;
	modInfo_t *pMod;

	dprintf("cfline(%s)", line);

	errno = 0;	/* keep strerror() stuff out of logerror messages */
	p = (uchar*) line;

	/* check which filter we need to pull... */
	switch(*p) {
		case ':':
			iRet = cflineProcessPropFilter(&p, f);
			break;
		case '!':
			if((iRet = cflineProcessTagSelector(&p)) == RS_RET_OK)
				iRet = RS_RET_NOENTRY;
			break;
		case '+':
		case '-':
			if((iRet = cflineProcessHostSelector(&p)) == RS_RET_OK)
				iRet = RS_RET_NOENTRY;
			break;
		default:
			iRet = cflineProcessTradPRIFilter(&p, f);
			break;
	}

	/* check if that went well... */
	if(iRet != RS_RET_OK) {
		return RS_RET_NOENTRY;
	}
	
	/* we now check if there are some global (BSD-style) filter conditions
	 * and, if so, we copy them over. rgerhards, 2005-10-18
	 */
	if(pDfltProgNameCmp != NULL)
		if((iRet = rsCStrConstructFromCStr(&(f->pCSProgNameComp), pDfltProgNameCmp)) != RS_RET_OK)
			return(iRet);

	if(eDfltHostnameCmpMode != HN_NO_COMP) {
		f->eHostnameCmpMode = eDfltHostnameCmpMode;
		if((iRet = rsCStrConstructFromCStr(&(f->pCSHostnameComp), pDfltHostnameCmp)) != RS_RET_OK)
			return(iRet);
	}

	dprintf("leading char in action: %c\n", *p);
	
	/* loop through all modules and see if one picks up the line */
	pMod = omodGetNxt(NULL);
	while(pMod != NULL) {
		iRet = pMod->mod.om.parseSelectorAct(&p , f);
		dprintf("trying selector action for %s: %d\n", modGetName(pMod), iRet);
		if(iRet == RS_RET_CONFLINE_PROCESSED) {
			dprintf("Module %s processed this config line.\n",
				modGetName(pMod));
			f->pMod = pMod;
			/* now check if the module is compatible with select features */
			if(pMod->isCompatibleWithFeature(sFEATURERepeatedMsgReduction) == RS_RET_OK)
				f->f_ReduceRepeated = bReduceRepeatMsgs;
			else {
				dprintf("module is incompatible with RepeatedMsgReduction - turned off\n");
				f->f_ReduceRepeated = 0;
			}
			f->bEnabled = 1; /* action is enabled */
			break;
		}
		else if(iRet != RS_RET_CONFLINE_UNPROCESSED) {
			/* In this case, the module would have handled the config
			 * line, but some error occured while doing so. This error should
			 * already by reported by the module. We do not try any other
			 * modules on this line, because we found the right one.
			 * rgerhards, 2007-07-24
			 */
			dprintf("error %d parsing config line\n", (int) iRet);
			break;
		}
		pMod = omodGetNxt(pMod);
	}

	return (iRet == RS_RET_CONFLINE_PROCESSED) ? RS_RET_OK : RS_RET_NOENTRY;
}


/*  Decode a symbolic name to a numeric value
 */
int decode(uchar *name, struct code *codetab)
{
	register struct code *c;
	register uchar *p;
	uchar buf[80];

	assert(name != NULL);
	assert(codetab != NULL);

	dprintf ("symbolic name: %s", name);
	if (isdigit((int) *name))
	{
		dprintf ("\n");
		return (atoi((char*) name));
	}
	strncpy((char*) buf, (char*) name, 79);
	for (p = buf; *p; p++)
		if (isupper((int) *p))
			*p = tolower((int) *p);
	for (c = codetab; c->c_name; c++)
		if (!strcmp((char*) buf, (char*) c->c_name))
		{
			dprintf (" ==> %d\n", c->c_val);
			return (c->c_val);
		}
	return (-1);
}

extern void dprintf(char *fmt, ...) __attribute__((format(printf,1, 2)));
void dprintf(char *fmt, ...)
{
#	ifdef USE_PTHREADS
	static int bWasNL = FALSE;
#	endif
	va_list ap;

	if ( !(Debug && debugging_on) )
		return;
	
#	ifdef USE_PTHREADS
	/* The bWasNL handler does not really work. It works if no thread
	 * switching occurs during non-NL messages. Else, things are messed
	 * up. Anyhow, it works well enough to provide useful help during
	 * getting this up and running. It is questionable if the extra effort
	 * is worth fixing it, giving the limited appliability.
	 * rgerhards, 2005-10-25
	 * I have decided that it is not worth fixing it - especially as it works
	 * pretty well.
	 * rgerhards, 2007-06-15
	 */
	if(bWasNL) {
		fprintf(stdout, "%8.8d: ", (unsigned int) pthread_self());
	}
	bWasNL = (*(fmt + strlen(fmt) - 1) == '\n') ? TRUE : FALSE;
#	endif
	va_start(ap, fmt);
	vfprintf(stdout, fmt, ap);
	va_end(ap);

	fflush(stdout);
	return;
}


/*
 * The following function is resposible for handling a SIGHUP signal.  Since
 * we are now doing mallocs/free as part of init we had better not being
 * doing this during a signal handler.  Instead this function simply sets
 * a flag variable which will tell the main loop to go through a restart.
 */
void sighup_handler()
{
	restart = 1;
	signal(SIGHUP, sighup_handler);
	return;
}


/**
 * getSubString
 *
 * Copy a string byte by byte until the occurrence  
 * of a given separator.
 *
 * \param ppSrc		Pointer to a pointer of the source array of characters. If a
			separator detected the Pointer points to the next char after the
			separator. Except if the end of the string is dedected ('\n'). 
			Then it points to the terminator char. 
 * \param pDst		Pointer to the destination array of characters. Here the substing
			will be stored.
 * \param DstSize	Maximum numbers of characters to store.
 * \param cSep		Separator char.
 * \ret int		Returns 0 if no error occured.
 */
int getSubString(uchar **ppSrc,  char *pDst, size_t DstSize, char cSep)
{
	uchar *pSrc = *ppSrc;
	int iErr = 0; /* 0 = no error, >0 = error */
	while(*pSrc != cSep && *pSrc != '\n' && *pSrc != '\0' && DstSize>1) {
		*pDst++ = *(pSrc)++;
		DstSize--;
	}
	/* check if the Dst buffer was to small */
	if (*pSrc != cSep && *pSrc != '\n' && *pSrc != '\0')
	{ 
		dprintf("in getSubString, error Src buffer > Dst buffer\n");
		iErr = 1;
	}	
	if (*pSrc == '\0' || *pSrc == '\n')
		/* this line was missing, causing ppSrc to be invalid when it
		 * was returned in case of end-of-string. rgerhards 2005-07-29
		 */
		*ppSrc = pSrc;
	else
		*ppSrc = pSrc+1;
	*pDst = '\0';
	return iErr;
}


/* print out which socket we are listening on. This is only
 * a debug aid. rgerhards, 2007-07-02
 */
static void debugListenInfo(int fd, char *type)
{
	char *szFamily;
	int port;
	struct sockaddr sa;
	struct sockaddr_in *ipv4;
	struct sockaddr_in6 *ipv6;
	socklen_t saLen = sizeof(sa);

	if(getsockname(fd, &sa, &saLen) == 0) {
		switch(sa.sa_family) {
		case PF_INET:
			szFamily = "IPv4";
			ipv4 = (struct sockaddr_in*) &sa;
			port = ntohs(ipv4->sin_port);
			break;
		case PF_INET6:
			szFamily = "IPv6";
			ipv6 = (struct sockaddr_in6*) &sa;
			port = ntohs(ipv6->sin6_port);
			break;
		default:
			szFamily = "other";
			port = -1;
			break;
		}
		dprintf("Listening on %s syslogd socket %d (%s/port %d).\n",
			type, fd, szFamily, port);
		return;
	}

	/* we can not obtain peer info. We are just providing
	 * debug info, so this is no reason to break the program
	 * or do any serious error reporting.
	 */
	dprintf("Listening on syslogd socket %d - could not obtain peer info.\n", fd);
}


static void mainloop(void)
{
	fd_set readfds;
	int i;
	int	fd;
	char line[MAXLINE +1];
	int maxfds;
#ifdef  SYSLOG_INET
	fd_set writefds;
	selector_t *f;
	struct sockaddr_storage frominet;
	socklen_t socklen;
	uchar fromHost[NI_MAXHOST];
	uchar fromHostFQDN[NI_MAXHOST];
	int iTCPSess;
	ssize_t l;
#endif	/* #ifdef SYSLOG_INET */
#ifdef	BSD
#ifdef	USE_PTHREADS
	struct timeval tvSelectTimeout;
#endif
#endif


	/* --------------------- Main loop begins here. ----------------------------------------- */
	while(!bFinished){
		int nfds;
		errno = 0;
		FD_ZERO(&readfds);
		maxfds = 0;
#ifdef SYSLOG_UNIXAF
		/* Add the Unix Domain Sockets to the list of read
		 * descriptors.
		 * rgerhards 2005-08-01: we must now check if there are
		 * any local sockets to listen to at all. If the -o option
		 * is given without -a, we do not need to listen at all..
		 */
		/* Copy master connections */
		for (i = startIndexUxLocalSockets; i < nfunix; i++) {
			if (funix[i] != -1) {
				FD_SET(funix[i], &readfds);
				if (funix[i]>maxfds) maxfds=funix[i];
			}
		}
#endif
#ifdef SYSLOG_INET
		/* Add the UDP listen sockets to the list of read descriptors.
		 */
		if(finet != NULL && AcceptRemote) {
                        for (i = 0; i < *finet; i++) {
                                if (finet[i+1] != -1) {
					if(Debug)
						debugListenInfo(finet[i+1], "UDP");
                                        FD_SET(finet[i+1], &readfds);
					if(finet[i+1]>maxfds) maxfds=finet[i+1];
				}
                        }
		}

		/* Add the TCP listen sockets to the list of read descriptors.
	    	 */
		if(sockTCPLstn != NULL && *sockTCPLstn) {
			for (i = 0; i < *sockTCPLstn; i++) {
				/* The if() below is theoretically not needed, but I leave it in
				 * so that a socket may become unsuable during execution. That
				 * feature is not yet supported by the current code base.
				 */
				if (sockTCPLstn[i+1] != -1) {
					if(Debug)
						debugListenInfo(sockTCPLstn[i+1], "TCP");
					FD_SET(sockTCPLstn[i+1], &readfds);
					if(sockTCPLstn[i+1]>maxfds) maxfds=sockTCPLstn[i+1];
				}
			}
			/* do the sessions */
			iTCPSess = TCPSessGetNxtSess(-1);
			while(iTCPSess != -1) {
				int fdSess;
				fdSess = pTCPSessions[iTCPSess].sock;
				dprintf("Adding TCP Session %d\n", fdSess);
				FD_SET(fdSess, &readfds);
				if (fdSess>maxfds) maxfds=fdSess;
				/* now get next... */
				iTCPSess = TCPSessGetNxtSess(iTCPSess);
			}
		}

		/* TODO: activate the code below only if we actually need to check
		 * for outstanding writefds.
		 */
		if(1) {
			/* Now add the TCP output sockets to the writefds set. This implementation
			 * is not optimal (performance-wise) and it should be replaced with something
			 * better in the longer term. I've not yet done this, as this code is
			 * scheduled to be replaced after the liblogging integration.
			 * rgerhards 2005-07-20
			 */
			FD_ZERO(&writefds);
			for (f = Files; f != NULL ; f = f->f_next) {
				if(   (f->f_type == F_FORW)
				   && (f->f_un.f_forw.protocol == FORW_TCP)
				   && (TCPSendGetStatus(f) == TCP_SEND_CONNECTING)) {
				   FD_SET(f->f_file, &writefds);
				   if(f->f_file > maxfds)
					maxfds = f->f_file;
				   }
			}
		}
#endif

		if ( debugging_on ) {
			dprintf("----------------------------------------\n");
			dprintf("Calling select, active file descriptors (max %d): ", maxfds);
			for (nfds= 0; nfds <= maxfds; ++nfds)
				if ( FD_ISSET(nfds, &readfds) )
					dprintf("%d ", nfds);
			dprintf("\n");
		}

#define  MAIN_SELECT_TIMEVAL NULL
#ifdef BSD
#ifdef USE_PTHREADS
		/* There seems to be a problem with BSD and threads. When running on
		 * multiple threads, a signal will not cause the select call to be
		 * interrrupted. I am not sure if this is by design or an bug (some
		 * information on the web let's me think it is a bug), but that really
		 * does not matter. The issue with our code is that we will not gain
		 * control when rsyslogd is terminated or huped. What I am doing now is
		 * make the select call timeout after 10 seconds, so that we can check
		 * the condition then. Obviously, this causes some sluggish behaviour and
		 * also the loss of some (very few) cpu cycles. Both, I think, are
		 * absolutely acceptable.
		 * rgerhards, 2005-10-26
		 * TODO: I got some information: this seems to be expected signal() behaviour
		 * we should investigate the use of sigaction() (see klogd.c for an sample).
		 * rgerhards, 2007-06-22
		 */
		tvSelectTimeout.tv_sec = 10;
		tvSelectTimeout.tv_usec = 0;
#		undef MAIN_SELECT_TIMEVAL 
#		define MAIN_SELECT_TIMEVAL &tvSelectTimeout
#endif
#endif
#ifdef SYSLOG_INET
#define MAIN_SELECT_WRITEFDS (fd_set *) &writefds
#else
#define MAIN_SELECT_WRITEFDS NULL
#endif
		nfds = select(maxfds+1, (fd_set *) &readfds, MAIN_SELECT_WRITEFDS,
				  (fd_set *) NULL, MAIN_SELECT_TIMEVAL);
#undef MAIN_SELECT_TIMEVAL 
#undef MAIN_SELECT_WRITEFDS

		if(bRequestDoMark) {
			domark();
			bRequestDoMark = 0;
			/* We do not use continue, because domark() is carried out
			 * only when something else happened.
			 */
		}
		if(restart) {
			dprintf("\nReceived SIGHUP, reloading rsyslogd.\n");
#			ifdef USE_PTHREADS
				stopWorker();
#			endif
			init();
#			ifdef USE_PTHREADS
				startWorker();
#			endif
			restart = 0;
			continue;
		}
		if (nfds == 0) {
			dprintf("No select activity.\n");
			continue;
		}
		if (nfds < 0) {
			if (errno != EINTR)
				logerror("select");
			dprintf("Select interrupted.\n");
			continue;
		}

		if ( debugging_on )
		{
			dprintf("\nSuccessful select, descriptor count = %d, " \
				"Activity on: ", nfds);
			for (nfds= 0; nfds <= maxfds; ++nfds)
				if ( FD_ISSET(nfds, &readfds) )
					dprintf("%d ", nfds);
			dprintf(("\n"));
		}

#ifdef SYSLOG_INET
		/* TODO: activate the code below only if we actually need to check
		 * for outstanding writefds.
		 */
		if(1) {
			/* Now check the TCP send sockets. So far, we only see if they become
			 * writable and then change their internal status. No real async
			 * writing is currently done. This code will be replaced once liblogging
			 * is used, thus we try not to focus too much on it.
			 *
			 * IMPORTANT: With the current code, the writefds must be checked first,
			 * because the readfds might have messages to be forwarded, which
			 * rely on the status setting that is done here!
			 * rgerhards 2005-07-20
			 *
			 * liblogging implementation will not happen as anticipated above. So
			 * this code here will stay for quite a while.
			 * rgerhards, 2006-12-07
			 */
			for (f = Files; f != NULL ; f = f->f_next) {
				if(   (f->f_type == F_FORW)
				   && (f->f_un.f_forw.protocol == FORW_TCP)
				   && (TCPSendGetStatus(f) == TCP_SEND_CONNECTING)
				   && (FD_ISSET(f->f_file, &writefds))) {
					dprintf("tcp send socket %d ready for writing.\n", f->f_file);
					TCPSendSetStatus(f, TCP_SEND_READY);
					/* Send stored message (if any) */
					if(f->f_un.f_forw.savedMsg != NULL) {
						if(TCPSend(f, f->f_un.f_forw.savedMsg,
						           f->f_un.f_forw.savedMsgLen) != 0) {
							/* error! */
							f->f_type = F_FORW_SUSP;
							errno = 0;
							logerror("error forwarding via tcp, suspending...");
						}
					   free(f->f_un.f_forw.savedMsg);
					   f->f_un.f_forw.savedMsg = NULL;
					}
				   }
			}
		}
#endif /* #ifdef SYSLOG_INET */
#ifdef SYSLOG_UNIXAF
		for (i = 0; i < nfunix; i++) {
			if ((fd = funix[i]) != -1 && FD_ISSET(fd, &readfds)) {
				int iRcvd;
				iRcvd = recv(fd, line, MAXLINE - 1, 0);
				dprintf("Message from UNIX socket: #%d\n", fd);
				if (iRcvd > 0) {
					printchopped(LocalHostName, line, iRcvd,  fd, funixParseHost[i]);
				} else if (iRcvd < 0 && errno != EINTR) {
					dprintf("UNIX socket error: %d = %s.\n", \
						errno, strerror(errno));
					logerror("recvfrom UNIX");
				}
			}
		}
#endif

#ifdef SYSLOG_INET
               if (finet != NULL && AcceptRemote) {
                       for (i = 0; i < *finet; i++) {
                               if (FD_ISSET(finet[i+1], &readfds)) {
                                       socklen = sizeof(frominet);
                                       memset(line, '\0', sizeof(line));
                                       l = recvfrom(finet[i+1], line, MAXLINE - 1,
                                                    0, (struct sockaddr *)&frominet,
                                                    &socklen);
                                       if (l > 0) {
                                               line[l] = '\0';
                                               if(cvthname(&frominet, fromHost, fromHostFQDN) == 1) {
						       dprintf("Message from inetd socket: #%d, host: %s\n",
							       finet[i+1], fromHost);
						       /* Here we check if a host is permitted to send us
							* syslog messages. If it isn't, we do not further
							* process the message but log a warning (if we are
							* configured to do this).
							* rgerhards, 2005-09-26
							*/
						       if(isAllowedSender(pAllowedSenders_UDP,
						          (struct sockaddr *)&frominet, (char*)fromHostFQDN)) {
							       printchopped((char*)fromHost, line, l,  finet[i+1], 1);
						       } else {
							       if(option_DisallowWarning) {
								       logerrorSz("UDP message from disallowed sender %s discarded",
										  (char*)fromHost);
							       }	
						       }
					       }
				       }
                                       else if (l < 0 && errno != EINTR && errno != EAGAIN) {
					       dprintf("INET socket error: %d = %s.\n",
                                                                errno, strerror(errno));
                                                       logerror("recvfrom inet");
                                                       /* should be harmless */
                                                       sleep(1);
                                               }
		       		}
		       }
		}

		if(sockTCPLstn != NULL && *sockTCPLstn) {
			for (i = 0; i < *sockTCPLstn; i++) {
				if (FD_ISSET(sockTCPLstn[i+1], &readfds)) {
					dprintf("New connect on TCP inetd socket: #%d\n", sockTCPLstn[i+1]);
					TCPSessAccept(sockTCPLstn[i+1]);
				}
			}

			/* now check the sessions */
			/* TODO: optimize the whole thing. We could stop enumerating as
			 * soon as we have found all sockets flagged as active. */
			iTCPSess = TCPSessGetNxtSess(-1);
			while(iTCPSess != -1) {
				int fdSess;
				int state;
				fdSess = pTCPSessions[iTCPSess].sock;
				if(FD_ISSET(fdSess, &readfds)) {
					char buf[MAXLINE];
					dprintf("tcp session socket with new data: #%d\n", fdSess);

					/* Receive message */
					state = recv(fdSess, buf, sizeof(buf), 0);
					if(state == 0) {
						/* process any incomplete frames left over */
						TCPSessPrepareClose(iTCPSess);
						/* Session closed */
						TCPSessClose(iTCPSess);
					} else if(state == -1) {
						logerrorInt("TCP session %d will be closed, error ignored\n",
							    fdSess);
						TCPSessClose(iTCPSess);
					} else {
						/* valid data received, process it! */
						if(TCPSessDataRcvd(iTCPSess, buf, state) == 0) {
							/* in this case, something went awfully wrong.
							 * We are instructed to terminate the session.
							 */
							logerrorInt("Tearing down TCP Session %d - see "
							            "previous messages for reason(s)\n",
								    iTCPSess);
							TCPSessClose(iTCPSess);
						}
					}
				}
				iTCPSess = TCPSessGetNxtSess(iTCPSess);
			}
		}

#endif
	}
}

/* If user is not root, prints warnings or even exits 
 * TODO: check all dynafiles for write permission
 * ... but it is probably better to wait here until we have
 * a module interface - rgerhards, 2007-07-23
 */
static void checkPermissions()
{
	/* we are not root */
	if (geteuid() != 0)
	{
		fputs("WARNING: Local messages will not be logged! If you want to log them, run rsyslog as root.\n",stderr); 
#ifdef SYSLOG_INET	
		/* udp enabled and port number less than or equal to 1024 */
		if ( AcceptRemote && (atoi(LogPort) <= 1024) )
			fprintf(stderr, "WARNING: Will not listen on UDP port %s. Use port number higher than 1024 or run rsyslog as root!\n", LogPort);
		
		/* tcp enabled and port number less or equal to 1024 */
		if( bEnableTCP   && (atoi(TCPLstnPort) <= 1024) )
			fprintf(stderr, "WARNING: Will not listen on TCP port %s. Use port number higher than 1024 or run rsyslog as root!\n", TCPLstnPort);

		/* Neither explicit high UDP port nor explicit high TCP port.
                 * It is useless to run anymore */
		if( !(AcceptRemote && (atoi(LogPort) > 1024)) && !( bEnableTCP && (atoi(TCPLstnPort) > 1024)) )
		{
			fprintf(stderr, "ERROR: Nothing to log, no reason to run. Please run rsyslog as root.\n");
			exit(EXIT_FAILURE);
		}
#endif
	}
}


/* load build-in modules
 * very first version begun on 2007-07-23 by rgerhards
 */
static rsRetVal loadBuildInModules(void)
{
	rsRetVal iRet;

	if((iRet = doModInit(modInitFile, (uchar*) "builtin-file")) != RS_RET_OK)
		return iRet;
#ifdef SYSLOG_INET
	if((iRet = doModInit(modInitFwd, (uchar*) "builtin-fwd")) != RS_RET_OK)
		return iRet;
#endif
	if((iRet = doModInit(modInitShell, (uchar*) "builtin-shell")) != RS_RET_OK)
		return iRet;
#	ifdef WITH_DB
	if((iRet = doModInit(modInitMySQL, (uchar*) "builtin-mysql")) != RS_RET_OK)
		return iRet;
#	endif
	if((iRet = doModInit(modInitDiscard, (uchar*) "builtin-discard")) != RS_RET_OK)
		return iRet;

	/* dirty, but this must be for the time being: the usrmsg module must always be
	 * loaded as last module. This is because it processes any time of action selector.
	 * If we load it before other modules, these others will never have a chance of
	 * working with the config file. We may change that implementation so that a user name
	 * must start with an alnum, that would definitely help (but would it break backwards
	 * compatibility?). * rgerhards, 2007-07-23
	 */
	if((iRet = doModInit(modInitUsrMsg, (uchar*) "builtin-usrmsg")) != RS_RET_OK)
		return iRet;

	return RS_RET_OK;
}


int main(int argc, char **argv)
{	register int i;
	register char *p;
	int num_fds;
	rsRetVal iRet;

#ifdef	MTRACE
	mtrace(); /* this is a debug aid for leak detection - either remove
	           * or put in conditional compilation. 2005-01-18 RGerhards */
#endif

	pid_t ppid = getpid();
	int ch;
	struct hostent *hent;

	extern int optind;
	extern char *optarg;
	uchar *pTmp;

	if(chdir ("/") != 0)
		fprintf(stderr, "Can not do 'cd /' - still trying to run\n");
	for (i = 1; i < MAXFUNIX; i++) {
		funixn[i] = "";
		funix[i]  = -1;
	}

	if((iRet = loadBuildInModules()) != RS_RET_OK) {
		fprintf(stderr, "fatal error: could not activate built-in modules. Error code %d.\n",
			iRet);
		exit(1); /* "good" exit, leaving at init for fatal error */
	}

	while ((ch = getopt(argc, argv, "46Aa:dehi:f:l:m:nop:r::s:t:u:vwx")) != EOF) {
		switch((char)ch) {
                case '4':
	                family = PF_INET;
                        break;
                case '6':
                        family = PF_INET6;
                        break;
                case 'A':
                        send_to_all++;
                        break;
		case 'a':
			if (nfunix < MAXFUNIX)
				if(*optarg == ':') {
					funixParseHost[nfunix] = 1;
					funixn[nfunix++] = optarg+1;
				}
				else {
					funixParseHost[nfunix] = 0;
					funixn[nfunix++] = optarg;
				}
			else
				fprintf(stderr, "rsyslogd: Out of descriptors, ignoring %s\n", optarg);
			break;
		case 'd':		/* debug */
			Debug = 1;
			break;
		case 'e':		/* log every message (no repeat message supression) */
			logEveryMsg = 1;
			break;
		case 'f':		/* configuration file */
			ConfFile = optarg;
			break;
		case 'h':
			NoHops = 0;
			break;
		case 'i':		/* pid file name */
			PidFile = optarg;
			break;
		case 'l':
			if (LocalHosts) {
				fprintf (stderr, "rsyslogd: Only one -l argument allowed," \
					"the first one is taken.\n");
				break;
			}
			LocalHosts = crunch_list(optarg);
			break;
		case 'm':		/* mark interval */
			MarkInterval = atoi(optarg) * 60;
			break;
		case 'n':		/* don't fork */
			NoFork = 1;
			break;
		case 'o':		/* omit local logging (/dev/log) */
			startIndexUxLocalSockets = 1;
			break;
		case 'p':		/* path to regular log socket */
			funixn[0] = optarg;
			break;
		case 'r':		/* accept remote messages */
			AcceptRemote = 1;
			if(optarg == NULL)
				LogPort = "0";
			else
				LogPort = optarg;
			break;
		case 's':
			if (StripDomains) {
				fprintf (stderr, "rsyslogd: Only one -s argument allowed," \
					"the first one is taken.\n");
				break;
			}
			StripDomains = crunch_list(optarg);
			break;
		case 't':		/* enable tcp logging */
#ifdef SYSLOG_INET
			configureTCPListen(optarg);
#else
			fprintf(stderr, "rsyslogd: -t not valid - not compiled for network support");
#endif
			break;
		case 'u':		/* misc user settings */
			if(atoi(optarg) == 1)
				bParseHOSTNAMEandTAG = 0;
			break;
		case 'v':
			printf("rsyslogd %s, ", VERSION);
			printf("compiled with:\n");
#ifdef USE_PTHREADS
			printf("\tFEATURE_PTHREADS (dual-threading)\n");
#endif
#ifdef FEATURE_REGEXP
			printf("\tFEATURE_REGEXP\n");
#endif
#ifdef WITH_DB
			printf("\tFEATURE_DB\n");
#endif
#ifndef	NOLARGEFILE
			printf("\tFEATURE_LARGEFILE\n");
#endif
#ifdef	USE_NETZIP
			printf("\tFEATURE_NETZIP (syslog message compression)\n");
#endif
#ifdef	SYSLOG_INET
			printf("\tSYSLOG_INET (Internet/remote support)\n");
#endif
#ifndef	NDEBUG
			printf("\tFEATURE_DEBUG (debug build, slow code)\n");
#endif
			printf("\nSee http://www.rsyslog.com for more information.\n");
			exit(0); /* exit for -v option - so this is a "good one" */
		case 'w':		/* disable disallowed host warnigs */
			option_DisallowWarning = 0;
			break;
		case 'x':		/* disable dns for remote messages */
			DisableDNS = 1;
			break;
		case '?':              
		default:
			usage();
		}
	}

	if ((argc -= optind))
		usage();

	checkPermissions();

	if ( !(Debug || NoFork) )
	{
		dprintf("Checking pidfile.\n");
		if (!check_pid(PidFile))
		{
			signal (SIGTERM, doexit);
			if (fork()) {
				/*
				 * Parent process
				 */
				sleep(300);
				/*
				 * Not reached unless something major went wrong.  5
				 * minutes should be a fair amount of time to wait.
				 * Please note that this procedure is important since
				 * the father must not exit before syslogd isn't
				 * initialized or the klogd won't be able to flush its
				 * logs.  -Joey
				 */
				exit(1); /* "good" exit - after forking, not diasabling anything */
			}
			num_fds = getdtablesize();
			for (i= 0; i < num_fds; i++)
				(void) close(i);
			untty();
		}
		else
		{
			fputs(" Already running.\n", stderr);
			exit(1); /* "good" exit, done if syslogd is already running */
		}
	}
	else
		debugging_on = 1;

	/* tuck my process id away */
	if ( !Debug )
	{
		dprintf("Writing pidfile.\n");
		if (!check_pid(PidFile))
		{
			if (!write_pid(PidFile))
			{
				dprintf("Can't write pid.\n");
				exit(1); /* exit during startup - questionable */
			}
		}
		else
		{
			dprintf("Pidfile (and pid) already exist.\n");
			exit(1); /* exit during startup - questionable */
		}
	} /* if ( !Debug ) */
	myPid = getpid(); 	/* save our pid for further testing (also used for messages) */

	/* initialize the default templates
	 * we use template names with a SP in front - these 
	 * can NOT be generated via the configuration file
	 */
	pTmp = template_TraditionalFormat;
	tplAddLine(" TradFmt", &pTmp);
	pTmp = template_WallFmt;
	tplAddLine(" WallFmt", &pTmp);
	pTmp = template_StdFwdFmt;
	tplAddLine(" StdFwdFmt", &pTmp);
	pTmp = template_StdUsrMsgFmt;
	tplAddLine(" StdUsrMsgFmt", &pTmp);
	pTmp = template_StdDBFmt;
	tplLastStaticInit(tplAddLine(" StdDBFmt", &pTmp));

	/* prepare emergency logging system */

	consfile.f_type = F_CONSOLE;
	strcpy(consfile.f_un.f_file.f_fname, ctty);
	/* TODO: check this */
	cflineSetTemplateAndIOV(&consfile, " TradFmt");
	gethostname(LocalHostName, sizeof(LocalHostName));
	if ( (p = strchr(LocalHostName, '.')) ) {
		*p++ = '\0';
		LocalDomain = p;
	}
	else
	{
		LocalDomain = "";

		/*
		 * It's not clearly defined whether gethostname()
		 * should return the simple hostname or the fqdn. A
		 * good piece of software should be aware of both and
		 * we want to distribute good software.  Joey
		 *
		 * Good software also always checks its return values...
		 * If syslogd starts up before DNS is up & /etc/hosts
		 * doesn't have LocalHostName listed, gethostbyname will
		 * return NULL. 
		 */
		hent = gethostbyname(LocalHostName);
		if ( hent )
			snprintf(LocalHostName, sizeof(LocalHostName), "%s", hent->h_name);
			
		if ( (p = strchr(LocalHostName, '.')) )
		{
			*p++ = '\0';
			LocalDomain = p;
		}
	}

	/* Convert to lower case to recognize the correct domain laterly
	 */
	for (p = (char *)LocalDomain; *p ; p++)
		if (isupper((int) *p))
			*p = tolower(*p);

	(void) signal(SIGTERM, doDie);
	(void) signal(SIGINT, Debug ? doDie : SIG_IGN);
	(void) signal(SIGQUIT, Debug ? doDie : SIG_IGN);
	(void) signal(SIGCHLD, reapchild);
	(void) signal(SIGALRM, domarkAlarmHdlr);
	(void) signal(SIGUSR1, Debug ? debug_switch : SIG_IGN);
	(void) signal(SIGPIPE, SIG_IGN);
	(void) signal(SIGXFSZ, SIG_IGN); /* do not abort if 2gig file limit is hit */
	(void) alarm(TIMERINTVL);

	dprintf("Starting.\n");
	init();
	if(Debug) {
		dprintf("Debugging enabled, SIGUSR1 to turn off debugging.\n");
		debugging_on = 1;
	}
	/*
	 * Send a signal to the parent to it can terminate.
	 */
	if (myPid != ppid)
		kill (ppid, SIGTERM);
	/* END OF INTIALIZATION
	 * ... but keep in mind that we might do a restart and thus init() might
	 * be called again. If that happens, we must shut down all active threads,
	 * do the init() and then restart things.
	 * rgerhards, 2005-10-24
	 */
#ifdef	USE_PTHREADS
	/* create message queue */
	pMsgQueue = queueInit();
	if(pMsgQueue == NULL) {
		errno = 0;
		logerror("error: could not create message queue - running single-threaded!\n");
	} else { /* start up worker thread */
		startWorker();
	}
#endif

	/* --------------------- Main loop begins here. ----------------------------------------- */
	mainloop();
	die(bFinished);
	return 0;
}


/*
 * Local variables:
 *  c-indent-level: 8
 *  c-basic-offset: 8
 *  tab-width: 8
 * End:
 * vi:set ai:
 */