/** * \brief This is the main file of the rsyslogd daemon. * * Please visit the rsyslog project at * * http://www.rsyslog.com * * to learn more about it and discuss any questions you may have. * * rsyslog had initially been forked from the sysklogd project. * I would like to express my thanks to the developers of the sysklogd * package - without it, I would have had a much harder start... * * Please note that while rsyslog started from the sysklogd code base, * it nowadays has almost nothing left in common with it. Allmost all * parts of the code have been rewritten. * * This Project was intiated and is maintained by * Rainer Gerhards . See * AUTHORS to learn who helped make it become a reality. * * If you have questions about rsyslogd in general, please email * info@adiscon.com. To learn more about rsyslogd, please visit * http://www.rsyslog.com. * * \author Rainer Gerhards * \date 2003-10-17 * Some initial modifications on the sysklogd package to support * liblogging. These have actually not yet been merged to the * source you see currently (but they hopefully will) * * \date 2004-10-28 * Restarted the modifications of sysklogd. This time, we * focus on a simpler approach first. The initial goal is to * provide MySQL database support (so that syslogd can log * to the database). * * rsyslog - An Enhanced syslogd Replacement. * Copyright 2003-2008 Rainer Gerhards and Adiscon GmbH. * * This file is part of rsyslog. * * Rsyslog is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * Rsyslog is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with Rsyslog. If not, see . * * A copy of the GPL can be found in the file "COPYING" in this distribution. */ #include "config.h" #include "rsyslog.h" #define DEFUPRI (LOG_USER|LOG_NOTICE) #define TIMERINTVL 30 /* interval for checking flush, mark */ #include #include #include #include #include #include #define GNU_SOURCE #include #include #include #include #ifdef OS_SOLARIS # include # include # include # include # include #else # include # include #endif #include #include #include #include #include #if HAVE_SYS_TIMESPEC_H # include #endif #if HAVE_SYS_STAT_H # include #endif #include #if HAVE_PATHS_H #include #endif #ifdef USE_NETZIP #include #endif #include #include "pidfile.h" #include "srUtils.h" #include "stringbuf.h" #include "syslogd-types.h" #include "template.h" #include "outchannel.h" #include "syslogd.h" #include "msg.h" #include "modules.h" #include "action.h" #include "iminternal.h" #include "cfsysline.h" #include "omshell.h" #include "omusrmsg.h" #include "omfwd.h" #include "omfile.h" #include "omdiscard.h" #include "threads.h" #include "queue.h" #include "stream.h" #include "conf.h" #include "vm.h" #include "errmsg.h" #include "datetime.h" #include "parser.h" #include "sysvar.h" #include "unicode-helper.h" /* definitions for objects we access */ DEFobjCurrIf(obj) DEFobjCurrIf(glbl) DEFobjCurrIf(datetime) DEFobjCurrIf(conf) DEFobjCurrIf(expr) DEFobjCurrIf(vm) DEFobjCurrIf(var) DEFobjCurrIf(module) DEFobjCurrIf(errmsg) DEFobjCurrIf(net) /* TODO: make go away! */ /* forward definitions */ static rsRetVal GlobalClassExit(void); /* We define our own set of syslog defintions so that we * do not need to rely on (possibly different) implementations. * 2007-07-19 rgerhards */ /* missing definitions for solaris * 2006-02-16 Rger */ #ifdef __sun # define LOG_AUTHPRIV LOG_AUTH #endif #define INTERNAL_NOPRI 0x10 /* the "no priority" priority */ #define LOG_FTP (11<<3) /* ftp daemon */ #ifndef UTMP_FILE #ifdef UTMP_FILENAME #define UTMP_FILE UTMP_FILENAME #else #ifdef _PATH_UTMP #define UTMP_FILE _PATH_UTMP #else #define UTMP_FILE "/etc/utmp" #endif #endif #endif #ifndef _PATH_LOGCONF #define _PATH_LOGCONF "/etc/rsyslog.conf" #endif #ifndef _PATH_MODDIR #define _PATH_MODDIR "/lib/rsyslog/" #endif #if defined(SYSLOGD_PIDNAME) # undef _PATH_LOGPID # if defined(FSSTND) # ifdef OS_BSD # define _PATH_VARRUN "/var/run/" # endif # if defined(__sun) || defined(__hpux) # define _PATH_VARRUN "/var/run/" # endif # define _PATH_LOGPID _PATH_VARRUN SYSLOGD_PIDNAME # else # define _PATH_LOGPID "/etc/" SYSLOGD_PIDNAME # endif #else # ifndef _PATH_LOGPID # if defined(__sun) || defined(__hpux) # define _PATH_VARRUN "/var/run/" # endif # if defined(FSSTND) # define _PATH_LOGPID _PATH_VARRUN "rsyslogd.pid" # else # define _PATH_LOGPID "/etc/rsyslogd.pid" # endif # endif #endif #ifndef _PATH_DEV # define _PATH_DEV "/dev/" #endif #ifndef _PATH_TTY #define _PATH_TTY "/dev/tty" #endif static uchar *ConfFile = (uchar*) _PATH_LOGCONF; /* read-only after startup */ static char *PidFile = _PATH_LOGPID; /* read-only after startup */ static pid_t myPid; /* our pid for use in self-generated messages, e.g. on startup */ /* mypid is read-only after the initial fork() */ static int bHadHUP = 0; /* did we have a HUP? */ static int bParseHOSTNAMEandTAG = 1; /* global config var: should the hostname and tag be * parsed inside message - rgerhards, 2006-03-13 */ static int bFinished = 0; /* used by termination signal handler, read-only except there * is either 0 or the number of the signal that requested the * termination. */ static int iConfigVerify = 0; /* is this just a config verify run? */ /* Intervals at which we flush out "message repeated" messages, * in seconds after previous message is logged. After each flush, * we move to the next interval until we reach the largest. * TODO: this shall go into action object! -- rgerhards, 2008-01-29 */ int repeatinterval[2] = { 30, 60 }; /* # of secs before flush */ #define LIST_DELIMITER ':' /* delimiter between two hosts */ struct filed *Files = NULL; /* read-only after init() (but beware of sigusr1!) */ static pid_t ppid; /* This is a quick and dirty hack used for spliting main/startup thread */ typedef struct legacyOptsLL_s { uchar *line; struct legacyOptsLL_s *next; } legacyOptsLL_t; legacyOptsLL_t *pLegacyOptsLL = NULL; /* global variables for config file state */ int bDropTrailingLF = 1; /* drop trailing LF's on reception? */ int iCompatibilityMode = 0; /* version we should be compatible with; 0 means sysklogd. It is the default, so if no -c option is given, we make ourselvs as compatible to sysklogd as possible. */ static int bDebugPrintTemplateList = 1;/* output template list in debug mode? */ static int bDebugPrintCfSysLineHandlerList = 1;/* output cfsyslinehandler list in debug mode? */ static int bDebugPrintModuleList = 1;/* output module list in debug mode? */ uchar cCCEscapeChar = '\\';/* character to be used to start an escape sequence for control chars */ int bEscapeCCOnRcv = 1; /* escape control characters on reception: 0 - no, 1 - yes */ static int bErrMsgToStderr = 1; /* print error messages to stderr (in addition to everything else)? */ int bReduceRepeatMsgs; /* reduce repeated message - 0 - no, 1 - yes */ int bActExecWhenPrevSusp; /* execute action only when previous one was suspended? */ int iActExecOnceInterval = 0; /* execute action once every nn seconds */ /* end global config file state variables */ int MarkInterval = 20 * 60; /* interval between marks in seconds - read-only after startup */ int send_to_all = 0; /* send message to all IPv4/IPv6 addresses */ static int NoFork = 0; /* don't fork - don't run in daemon mode - read-only after startup */ static int bHaveMainQueue = 0;/* set to 1 if the main queue - in queueing mode - is available * If the main queue is either not yet ready or not running in * queueing mode (mode DIRECT!), then this is set to 0. */ static int uidDropPriv = 0; /* user-id to which priveleges should be dropped to (AFTER init()!) */ static int gidDropPriv = 0; /* group-id to which priveleges should be dropped to (AFTER init()!) */ extern int errno; static uchar *pszConfDAGFile = NULL; /* name of config DAG file, non-NULL means generate one */ /* main message queue and its configuration parameters */ static qqueue_t *pMsgQueue = NULL; /* the main message queue */ static int iMainMsgQueueSize = 10000; /* size of the main message queue above */ static int iMainMsgQHighWtrMark = 8000; /* high water mark for disk-assisted queues */ static int iMainMsgQLowWtrMark = 2000; /* low water mark for disk-assisted queues */ static int iMainMsgQDiscardMark = 9800; /* begin to discard messages */ static int iMainMsgQDiscardSeverity = 8; /* by default, discard nothing to prevent unintentional loss */ static int iMainMsgQueueNumWorkers = 1; /* number of worker threads for the mm queue above */ static queueType_t MainMsgQueType = QUEUETYPE_FIXED_ARRAY; /* type of the main message queue above */ static uchar *pszMainMsgQFName = NULL; /* prefix for the main message queue file */ static int64 iMainMsgQueMaxFileSize = 1024*1024; static int iMainMsgQPersistUpdCnt = 0; /* persist queue info every n updates */ static int iMainMsgQtoQShutdown = 0; /* queue shutdown */ static int iMainMsgQtoActShutdown = 1000; /* action shutdown (in phase 2) */ static int iMainMsgQtoEnq = 2000; /* timeout for queue enque */ static int iMainMsgQtoWrkShutdown = 60000; /* timeout for worker thread shutdown */ static int iMainMsgQWrkMinMsgs = 100; /* minimum messages per worker needed to start a new one */ static int iMainMsgQDeqSlowdown = 0; /* dequeue slowdown (simple rate limiting) */ static int64 iMainMsgQueMaxDiskSpace = 0; /* max disk space allocated 0 ==> unlimited */ static int bMainMsgQSaveOnShutdown = 1; /* save queue on shutdown (when DA enabled)? */ static int iMainMsgQueueDeqtWinFromHr = 0; /* hour begin of time frame when queue is to be dequeued */ static int iMainMsgQueueDeqtWinToHr = 25; /* hour begin of time frame when queue is to be dequeued */ /* support for simple textual representation of FIOP names * rgerhards, 2005-09-27 */ static char* getFIOPName(unsigned iFIOP) { char *pRet; switch(iFIOP) { case FIOP_CONTAINS: pRet = "contains"; break; case FIOP_ISEQUAL: pRet = "isequal"; break; case FIOP_STARTSWITH: pRet = "startswith"; break; case FIOP_REGEX: pRet = "regex"; break; default: pRet = "NOP"; break; } return pRet; } /* Reset config variables to default values. * rgerhards, 2007-07-17 */ static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal) { cCCEscapeChar = '#'; bActExecWhenPrevSusp = 0; iActExecOnceInterval = 0; bDebugPrintTemplateList = 1; bDebugPrintCfSysLineHandlerList = 1; bDebugPrintModuleList = 1; bEscapeCCOnRcv = 1; /* default is to escape control characters */ bReduceRepeatMsgs = 0; free(pszMainMsgQFName); pszMainMsgQFName = NULL; iMainMsgQueueSize = 10000; iMainMsgQHighWtrMark = 8000; iMainMsgQLowWtrMark = 2000; iMainMsgQDiscardMark = 9800; iMainMsgQDiscardSeverity = 8; iMainMsgQueMaxFileSize = 1024 * 1024; iMainMsgQueueNumWorkers = 1; iMainMsgQPersistUpdCnt = 0; iMainMsgQtoQShutdown = 0; iMainMsgQtoActShutdown = 1000; iMainMsgQtoEnq = 2000; iMainMsgQtoWrkShutdown = 60000; iMainMsgQWrkMinMsgs = 100; iMainMsgQDeqSlowdown = 0; bMainMsgQSaveOnShutdown = 1; MainMsgQueType = QUEUETYPE_FIXED_ARRAY; iMainMsgQueMaxDiskSpace = 0; glbliActionResumeRetryCount = 0; return RS_RET_OK; } /* hardcoded standard templates (used for defaults) */ static uchar template_DebugFormat[] = "\"Debug line with all properties:\nFROMHOST: '%FROMHOST%', fromhost-ip: '%fromhost-ip%', HOSTNAME: '%HOSTNAME%', PRI: %PRI%,\nsyslogtag '%syslogtag%', programname: '%programname%', APP-NAME: '%APP-NAME%', PROCID: '%PROCID%', MSGID: '%MSGID%',\nTIMESTAMP: '%TIMESTAMP%', STRUCTURED-DATA: '%STRUCTURED-DATA%',\nmsg: '%msg%'\nescaped msg: '%msg:::drop-cc%'\nrawmsg: '%rawmsg%'\n\n\""; static uchar template_SyslogProtocol23Format[] = "\"<%PRI%>1 %TIMESTAMP:::date-rfc3339% %HOSTNAME% %APP-NAME% %PROCID% %MSGID% %STRUCTURED-DATA% %msg%\n\""; static uchar template_TraditionalFileFormat[] = "\"%TIMESTAMP% %HOSTNAME% %syslogtag%%msg:::sp-if-no-1st-sp%%msg:::drop-last-lf%\n\""; static uchar template_FileFormat[] = "\"%TIMESTAMP:::date-rfc3339% %HOSTNAME% %syslogtag%%msg:::sp-if-no-1st-sp%%msg:::drop-last-lf%\n\""; static uchar template_WallFmt[] = "\"\r\n\7Message from syslogd@%HOSTNAME% at %timegenerated% ...\r\n %syslogtag%%msg%\n\r\""; static uchar template_ForwardFormat[] = "\"<%PRI%>%TIMESTAMP:::date-rfc3339% %HOSTNAME% %syslogtag:1:32%%msg:::sp-if-no-1st-sp%%msg%\""; static uchar template_TraditionalForwardFormat[] = "\"<%PRI%>%TIMESTAMP% %HOSTNAME% %syslogtag:1:32%%msg:::sp-if-no-1st-sp%%msg%\""; static uchar template_StdUsrMsgFmt[] = "\" %syslogtag%%msg%\n\r\""; static uchar template_StdDBFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-mysql%', '%timegenerated:::date-mysql%', %iut%, '%syslogtag%')\",SQL"; static uchar template_StdPgSQLFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-pgsql%', '%timegenerated:::date-pgsql%', %iut%, '%syslogtag%')\",STDSQL"; /* end template */ /* up to the next comment, prototypes that should be removed by reordering */ /* Function prototypes. */ static char **crunch_list(char *list); static void reapchild(); static void debug_switch(); static void sighup_handler(); static void freeSelectors(void); static void processImInternal(void); static int usage(void) { fprintf(stderr, "usage: rsyslogd [-c] [-46AdnqQvwx] [-l] [-s]\n" " [-f] [-i] [-N] [-M]\n" " [-u]\n" "To run rsyslogd in native mode, use \"rsyslogd -c3 \"\n\n" "For further information see http://www.rsyslog.com/doc\n"); exit(1); /* "good" exit - done to terminate usage() */ } /* ------------------------------ some support functions for imdiag ------------------------------ * * This is a bit dirty, but the only way to do it, at least with reasonable effort. * rgerhards, 2009-05-25 */ /* return back the approximate current number of messages in the main message queue */ rsRetVal diagGetMainMsgQSize(int *piSize) { DEFiRet; assert(piSize != NULL); *piSize = pMsgQueue->iQueueSize; RETiRet; } /* ------------------------------ end support functions for imdiag ------------------------------ */ /* function to destruct a selector_t object * rgerhards, 2007-08-01 */ rsRetVal selectorDestruct(void *pVal) { selector_t *pThis = (selector_t *) pVal; assert(pThis != NULL); if(pThis->pCSHostnameComp != NULL) rsCStrDestruct(&pThis->pCSHostnameComp); if(pThis->pCSProgNameComp != NULL) rsCStrDestruct(&pThis->pCSProgNameComp); if(pThis->f_filter_type == FILTER_PROP) { if(pThis->f_filterData.prop.pCSPropName != NULL) rsCStrDestruct(&pThis->f_filterData.prop.pCSPropName); if(pThis->f_filterData.prop.pCSCompValue != NULL) rsCStrDestruct(&pThis->f_filterData.prop.pCSCompValue); if(pThis->f_filterData.prop.regex_cache != NULL) rsCStrRegexDestruct(&pThis->f_filterData.prop.regex_cache); } else if(pThis->f_filter_type == FILTER_EXPR) { if(pThis->f_filterData.f_expr != NULL) expr.Destruct(&pThis->f_filterData.f_expr); } llDestroy(&pThis->llActList); free(pThis); return RS_RET_OK; } /* function to construct a selector_t object * rgerhards, 2007-08-01 */ rsRetVal selectorConstruct(selector_t **ppThis) { DEFiRet; selector_t *pThis; assert(ppThis != NULL); if((pThis = (selector_t*) calloc(1, sizeof(selector_t))) == NULL) { ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); } CHKiRet(llInit(&pThis->llActList, actionDestruct, NULL, NULL)); finalize_it: if(iRet != RS_RET_OK) { if(pThis != NULL) { selectorDestruct(pThis); } } *ppThis = pThis; RETiRet; } /* rgerhards, 2005-10-24: crunch_list is called only during option processing. So * it is never called once rsyslogd is running (not even when HUPed). This code * contains some exits, but they are considered safe because they only happen * during startup. Anyhow, when we review the code here, we might want to * reconsider the exit()s. */ static char **crunch_list(char *list) { int count, i; char *p, *q; char **result = NULL; p = list; /* strip off trailing delimiters */ while (p[strlen(p)-1] == LIST_DELIMITER) { count--; p[strlen(p)-1] = '\0'; } /* cut off leading delimiters */ while (p[0] == LIST_DELIMITER) { count--; p++; } /* count delimiters to calculate elements */ for (count=i=0; p[i]; i++) if (p[i] == LIST_DELIMITER) count++; if ((result = (char **)malloc(sizeof(char *) * (count+2))) == NULL) { printf ("Sorry, can't get enough memory, exiting.\n"); exit(0); /* safe exit, because only called during startup */ } /* * We now can assume that the first and last * characters are different from any delimiters, * so we don't have to care about this. */ count = 0; while ((q=strchr(p, LIST_DELIMITER))) { result[count] = (char *) malloc((q - p + 1) * sizeof(char)); if (result[count] == NULL) { printf ("Sorry, can't get enough memory, exiting.\n"); exit(0); /* safe exit, because only called during startup */ } strncpy(result[count], p, q - p); result[count][q - p] = '\0'; p = q; p++; count++; } if ((result[count] = \ (char *)malloc(sizeof(char) * strlen(p) + 1)) == NULL) { printf ("Sorry, can't get enough memory, exiting.\n"); exit(0); /* safe exit, because only called during startup */ } strcpy(result[count],p); result[++count] = NULL; #if 0 count=0; while (result[count]) dbgprintf("#%d: %s\n", count, StripDomains[count++]); #endif return result; } void untty(void) #ifdef HAVE_SETSID { if ( !Debug ) { setsid(); } return; } #else { int i; if ( !Debug ) { i = open(_PATH_TTY, O_RDWR|O_CLOEXEC); if (i >= 0) { # if !defined(__hpux) (void) ioctl(i, (int) TIOCNOTTY, (char *)0); # else /* TODO: we need to implement something for HP UX! -- rgerhards, 2008-03-04 */ /* actually, HP UX should have setsid, so the code directly above should * trigger. So the actual question is why it doesn't do that... */ # endif (void) close(i); } } } #endif /* Take a raw input line, decode the message, and print the message * on the appropriate log files. * rgerhards 2004-11-08: Please note * that this function does only a partial decoding. At best, it splits * the PRI part. No further decode happens. The rest is done in * logmsg(). * Added the iSource parameter so that we know if we have to parse * HOSTNAME or not. rgerhards 2004-11-16. * changed parameter iSource to bParseHost. For details, see comment in * printchopped(). rgerhards 2005-10-06 * rgerhards: 2008-03-06: added "flags" to allow an input module to specify * flags, most importantly to request ignoring the messages' timestamp. * * rgerhards, 2008-03-19: * I added an additional calling parameter to permit specifying the flow * control capability of the source. * * rgerhards, 2008-05-16: * I added an additional calling parameter (hnameIP) to enable specifying the IP * of a remote host. * * rgerhards, 2008-09-11: * Interface change: added new parameter "InputName", permits the input to provide * a string that identifies it. May be NULL, but must be a valid char* pointer if * non-NULL. * * rgerhards, 2008-10-06: * Interface change: added new parameter "stTime", which enables the caller to provide * a timestamp that is to be used as timegenerated instead of the current system time. * This is meant to facilitate performance optimization. Some inputs support such modes. * If stTime is NULL, the current system time is used. * * rgerhards, 2008-10-09: * interface change: bParseHostname removed, now in flags */ static inline rsRetVal printline(uchar *hname, uchar *hnameIP, uchar *msg, int flags, flowControl_t flowCtlType, uchar *pszInputName, struct syslogTime *stTime, time_t ttGenTime) { DEFiRet; register uchar *p; int pri; msg_t *pMsg; /* Now it is time to create the message object (rgerhards) */ if(stTime == NULL) { CHKiRet(msgConstruct(&pMsg)); } else { CHKiRet(msgConstructWithTime(&pMsg, stTime, ttGenTime)); } if(pszInputName != NULL) MsgSetInputName(pMsg, pszInputName); MsgSetFlowControlType(pMsg, flowCtlType); MsgSetRawMsg(pMsg, (char*)msg); /* test for special codes */ pri = DEFUPRI; p = msg; if (*p == '<') { pri = 0; while (isdigit((int) *++p)) { pri = 10 * pri + (*p - '0'); } if (*p == '>') ++p; } if (pri &~ (LOG_FACMASK|LOG_PRIMASK)) pri = DEFUPRI; pMsg->iFacility = LOG_FAC(pri); pMsg->iSeverity = LOG_PRI(pri); /* Now we look at the HOSTNAME. That is a bit complicated... * If we have a locally received message, it does NOT * contain any hostname information in the message itself. * As such, the HOSTNAME is the same as the system that * the message was received from (that, for obvious reasons, * being the local host). rgerhards 2004-11-16 */ if((pMsg->msgFlags & PARSE_HOSTNAME) == 0) MsgSetHOSTNAME(pMsg, hname); MsgSetRcvFrom(pMsg, hname); CHKiRet(MsgSetRcvFromIP(pMsg, hnameIP)); /* rgerhards 2004-11-19: well, well... we've now seen that we * have the "hostname problem" also with the traditional Unix * message. As we like to emulate it, we need to add the hostname * to it. */ if(MsgSetUxTradMsg(pMsg, (char*)p) != 0) ABORT_FINALIZE(RS_RET_ERR); logmsg(pMsg, flags); finalize_it: RETiRet; } /* This takes a received message that must be decoded and submits it to * the main message queue. The function calls the necessary parser. * * rgerhards, 2006-11-30: I have greatly changed this function. Formerly, * it tried to reassemble multi-part messages, which is a legacy stock * sysklogd concept. In essence, that was that messages not ending with * \0 were glued together. As far as I can see, this is a sysklogd * specific feature and, from looking at the code, seems to be used * pretty seldom (if at all). I remove this now, not the least because it is totally * incompatible with upcoming IETF syslog standards. If you experience * strange behaviour with messages beeing split across multiple lines, * this function here might be the place to look at. * * Some previous history worth noting: * I added the "iSource" parameter. This is needed to distinguish between * messages that have a hostname in them (received from the internet) and * those that do not have (most prominently /dev/log). rgerhards 2004-11-16 * And now I removed the "iSource" parameter and changed it to be "bParseHost", * because all that it actually controls is whether the host is parsed or not. * For rfc3195 support, we needed to modify the algo for host parsing, so we can * no longer rely just on the source (rfc3195d forwarded messages arrive via * unix domain sockets but contain the hostname). rgerhards, 2005-10-06 * * rgerhards, 2008-02-18: * This function was previously called "printchopped"() and has been renamed * as part of the effort to create a clean internal message submission interface. * It also has been adopted to our usual calling interface, but currently does * not provide any useful return states. But we now have the hook and things can * improve in the future. <-- TODO! * * rgerhards, 2008-03-19: * I added an additional calling parameter to permit specifying the flow * control capability of the source. * * rgerhards, 2008-05-16: * I added an additional calling parameter (hnameIP) to enable specifying the IP * of a remote host. * * rgerhards, 2008-09-11: * Interface change: added new parameter "InputName", permits the input to provide * a string that identifies it. May be NULL, but must be a valid char* pointer if * non-NULL. * * rgerhards, 2008-10-06: * Interface change: added new parameter "stTime", which enables the caller to provide * a timestamp that is to be used as timegenerated instead of the current system time. * This is meant to facilitate performance optimization. Some inputs support such modes. * If stTime is NULL, the current system time is used. * * rgerhards, 2008-10-09: * interface change: bParseHostname removed, now in flags */ rsRetVal parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int flags, flowControl_t flowCtlType, uchar *pszInputName, struct syslogTime *stTime, time_t ttGenTime) { DEFiRet; register int iMsg; uchar *pMsg; uchar *pData; uchar *pEnd; int iMaxLine; uchar *tmpline = NULL; # ifdef USE_NETZIP uchar *deflateBuf = NULL; uLongf iLenDefBuf; # endif assert(hname != NULL); assert(hnameIP != NULL); assert(msg != NULL); assert(len >= 0); /* we first allocate work buffers large enough to hold the configured maximum * size of a message. Over time, we should change this to a more optimal way, i.e. * by calling the function with the actual length of the message to be parsed. * rgerhards, 2008-09-02 * * TODO: optimize buffer handling */ iMaxLine = glbl.GetMaxLine(); CHKmalloc(tmpline = malloc(sizeof(uchar) * (iMaxLine + 1))); /* we first check if we have a NUL character at the very end of the * message. This seems to be a frequent problem with a number of senders. * So I have now decided to drop these NULs. However, if they are intentional, * that may cause us some problems, e.g. with syslog-sign. On the other hand, * current code always has problems with intentional NULs (as it needs to escape * them to prevent problems with the C string libraries), so that does not * really matter. Just to be on the save side, we'll log destruction of such * NULs in the debug log. * rgerhards, 2007-09-14 */ if(*(msg + len - 1) == '\0') { dbgprintf("dropped NUL at very end of message\n"); len--; } /* then we check if we need to drop trailing LFs, which often make * their way into syslog messages unintentionally. In order to remain * compatible to recent IETF developments, we allow the user to * turn on/off this handling. rgerhards, 2007-07-23 */ if(bDropTrailingLF && *(msg + len - 1) == '\n') { dbgprintf("dropped LF at very end of message (DropTrailingLF is set)\n"); len--; } iMsg = 0; /* initialize receiving buffer index */ pMsg = tmpline; /* set receiving buffer pointer */ pData = msg; /* set source buffer pointer */ pEnd = msg + len; /* this is one off, which is intensional */ # ifdef USE_NETZIP /* we first need to check if we have a compressed record. If so, * we must decompress it. */ if(len > 0 && *msg == 'z') { /* compressed data present? (do NOT change order if conditions!) */ /* we have compressed data, so let's deflate it. We support a maximum * message size of iMaxLine. If it is larger, an error message is logged * and the message is dropped. We do NOT try to decompress larger messages * as such might be used for denial of service. It might happen to later * builds that such functionality be added as an optional, operator-configurable * feature. */ int ret; iLenDefBuf = iMaxLine; CHKmalloc(deflateBuf = malloc(sizeof(uchar) * (iMaxLine + 1))); ret = uncompress((uchar *) deflateBuf, &iLenDefBuf, (uchar *) msg+1, len-1); dbgprintf("Compressed message uncompressed with status %d, length: new %ld, old %d.\n", ret, (long) iLenDefBuf, len-1); /* Now check if the uncompression worked. If not, there is not much we can do. In * that case, we log an error message but ignore the message itself. Storing the * compressed text is dangerous, as it contains control characters. So we do * not do this. If someone would like to have a copy, this code here could be * modified to do a hex-dump of the buffer in question. We do not include * this functionality right now. * rgerhards, 2006-12-07 */ if(ret != Z_OK) { errmsg.LogError(0, NO_ERRCODE, "Uncompression of a message failed with return code %d " "- enable debug logging if you need further information. " "Message ignored.", ret); FINALIZE; /* unconditional exit, nothing left to do... */ } pData = deflateBuf; pEnd = deflateBuf + iLenDefBuf; } # else /* ifdef USE_NETZIP */ /* in this case, we still need to check if the message is compressed. If so, we must * tell the user we can not accept it. */ if(len > 0 && *msg == 'z') { errmsg.LogError(0, NO_ERRCODE, "Received a compressed message, but rsyslogd does not have compression " "support enabled. The message will be ignored."); FINALIZE; } # endif /* ifdef USE_NETZIP */ while(pData < pEnd) { if(iMsg >= iMaxLine) { /* emergency, we now need to flush, no matter if * we are at end of message or not... */ if(iMsg == iMaxLine) { *(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */ printline(hname, hnameIP, tmpline, flags, flowCtlType, pszInputName, stTime, ttGenTime); } else { /* This case in theory never can happen. If it happens, we have * a logic error. I am checking for it, because if I would not, * we would address memory invalidly with the code above. I * do not care much about this case, just a debug log entry * (I couldn't do any more smart things anyway...). * rgerhards, 2007-9-20 */ dbgprintf("internal error: iMsg > max msg size in printchopped()\n"); } FINALIZE; /* in this case, we are done... nothing left we can do */ } if(*pData == '\0') { /* guard against \0 characters... */ /* changed to the sequence (somewhat) proposed in * draft-ietf-syslog-protocol-19. rgerhards, 2006-11-30 */ if(iMsg + 3 < iMaxLine) { /* do we have space? */ *(pMsg + iMsg++) = cCCEscapeChar; *(pMsg + iMsg++) = '0'; *(pMsg + iMsg++) = '0'; *(pMsg + iMsg++) = '0'; } /* if we do not have space, we simply ignore the '\0'... */ /* log an error? Very questionable... rgerhards, 2006-11-30 */ /* decided: we do not log an error, it won't help... rger, 2007-06-21 */ ++pData; } else if(bEscapeCCOnRcv && iscntrl((int) *pData)) { /* we are configured to escape control characters. Please note * that this most probably break non-western character sets like * Japanese, Korean or Chinese. rgerhards, 2007-07-17 * Note: sysklogd logs octal values only for DEL and CCs above 127. * For others, it logs ^n where n is the control char converted to an * alphabet character. We like consistency and thus escape it to octal * in all cases. If someone complains, we may change the mode. At least * we known now what's going on. * rgerhards, 2007-07-17 */ if(iMsg + 3 < iMaxLine) { /* do we have space? */ *(pMsg + iMsg++) = cCCEscapeChar; *(pMsg + iMsg++) = '0' + ((*pData & 0300) >> 6); *(pMsg + iMsg++) = '0' + ((*pData & 0070) >> 3); *(pMsg + iMsg++) = '0' + ((*pData & 0007)); } /* again, if we do not have space, we ignore the char - see comment at '\0' */ ++pData; } else { *(pMsg + iMsg++) = *pData++; } } *(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */ /* typically, we should end up here! */ printline(hname, hnameIP, tmpline, flags, flowCtlType, pszInputName, stTime, ttGenTime); finalize_it: if(tmpline != NULL) free(tmpline); # ifdef USE_NETZIP if(deflateBuf != NULL) free(deflateBuf); # endif RETiRet; } /* this is a special function used to submit an error message. This * function is also passed to the runtime library as the generic error * message handler. -- rgerhards, 2008-04-17 */ rsRetVal submitErrMsg(int iErr, uchar *msg) { DEFiRet; iRet = logmsgInternal(iErr, LOG_SYSLOG|LOG_ERR, msg, 0); RETiRet; } /* rgerhards 2004-11-09: the following is a function that can be used * to log a message orginating from the syslogd itself. In sysklogd code, * this is done by simply calling logmsg(). However, logmsg() is changed in * rsyslog so that it takes a msg "object". So it can no longer be called * directly. This method here solves the need. It provides an interface that * allows to construct a locally-generated message. Please note that this * function here probably is only an interim solution and that we need to * think on the best way to do this. */ rsRetVal logmsgInternal(int iErr, int pri, uchar *msg, int flags) { uchar pszTag[33]; msg_t *pMsg; DEFiRet; CHKiRet(msgConstruct(&pMsg)); MsgSetInputName(pMsg, UCHAR_CONSTANT("rsyslogd")); MsgSetUxTradMsg(pMsg, (char*)msg); MsgSetRawMsg(pMsg, (char*)msg); MsgSetHOSTNAME(pMsg, glbl.GetLocalHostName()); MsgSetRcvFrom(pMsg, glbl.GetLocalHostName()); MsgSetRcvFromIP(pMsg, UCHAR_CONSTANT("127.0.0.1")); /* check if we have an error code associated and, if so, * adjust the tag. -- r5gerhards, 2008-06-27 */ if(iErr == NO_ERRCODE) { MsgSetTAG(pMsg, "rsyslogd:"); } else { snprintf((char*)pszTag, sizeof(pszTag), "rsyslogd%d:", iErr); pszTag[32] = '\0'; /* just to make sure... */ MsgSetTAG(pMsg, (char*)pszTag); } pMsg->iFacility = LOG_FAC(pri); pMsg->iSeverity = LOG_PRI(pri); pMsg->bParseHOSTNAME = 0; flags |= INTERNAL_MSG; /* we now check if we should print internal messages out to stderr. This was * suggested by HKS as a way to help people troubleshoot rsyslog configuration * (by running it interactively. This makes an awful lot of sense, so I add * it here. -- rgerhards, 2008-07-28 * Note that error messages can not be disable during a config verify. This * permits us to process unmodified config files which otherwise contain a * supressor statement. */ if(((Debug || NoFork) && bErrMsgToStderr) || iConfigVerify) { fprintf(stderr, "rsyslogd: %s\n", msg); } if(bHaveMainQueue == 0) { /* not yet in queued mode */ iminternalAddMsg(pri, pMsg, flags); } else { /* we have the queue, so we can simply provide the * message to the queue engine. */ logmsg(pMsg, flags); } finalize_it: RETiRet; } /* This functions looks at the given message and checks if it matches the * provided filter condition. If so, it returns true, else it returns * false. This is a helper to logmsg() and meant to drive the decision * process if a message is to be processed or not. As I expect this * decision code to grow more complex over time AND logmsg() is already * a very lengthy function, I thought a separate function is more appropriate. * 2005-09-19 rgerhards * 2008-02-25 rgerhards: changed interface, now utilizes iRet, bProcessMsg * returns is message should be procesed. */ static rsRetVal shouldProcessThisMessage(selector_t *f, msg_t *pMsg, int *bProcessMsg) { DEFiRet; unsigned short pbMustBeFreed; char *pszPropVal; int bRet = 0; vm_t *pVM = NULL; var_t *pResult = NULL; assert(f != NULL); assert(pMsg != NULL); /* we first have a look at the global, BSD-style block filters (for tag * and host). Only if they match, we evaluate the actual filter. * rgerhards, 2005-10-18 */ if(f->eHostnameCmpMode == HN_NO_COMP) { /* EMPTY BY INTENSION - we check this value first, because * it is the one most often used, so this saves us time! */ } else if(f->eHostnameCmpMode == HN_COMP_MATCH) { if(rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) { /* not equal, so we are already done... */ dbgprintf("hostname filter '+%s' does not match '%s'\n", rsCStrGetSzStrNoNULL(f->pCSHostnameComp), getHOSTNAME(pMsg)); FINALIZE; } } else { /* must be -hostname */ if(!rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) { /* not equal, so we are already done... */ dbgprintf("hostname filter '-%s' does not match '%s'\n", rsCStrGetSzStrNoNULL(f->pCSHostnameComp), getHOSTNAME(pMsg)); FINALIZE; } } if(f->pCSProgNameComp != NULL) { int bInv = 0, bEqv = 0, offset = 0; if(*(rsCStrGetSzStrNoNULL(f->pCSProgNameComp)) == '-') { if(*(rsCStrGetSzStrNoNULL(f->pCSProgNameComp) + 1) == '-') offset = 1; else { bInv = 1; offset = 1; } } if(!rsCStrOffsetSzStrCmp(f->pCSProgNameComp, offset, (uchar*) getProgramName(pMsg), getProgramNameLen(pMsg))) bEqv = 1; if((!bEqv && !bInv) || (bEqv && bInv)) { /* not equal or inverted selection, so we are already done... */ dbgprintf("programname filter '%s' does not match '%s'\n", rsCStrGetSzStrNoNULL(f->pCSProgNameComp), getProgramName(pMsg)); FINALIZE; } } /* done with the BSD-style block filters */ if(f->f_filter_type == FILTER_PRI) { /* skip messages that are incorrect priority */ if ( (f->f_filterData.f_pmask[pMsg->iFacility] == TABLE_NOPRI) || \ ((f->f_filterData.f_pmask[pMsg->iFacility] & (1<iSeverity)) == 0) ) bRet = 0; else bRet = 1; } else if(f->f_filter_type == FILTER_EXPR) { CHKiRet(vm.Construct(&pVM)); CHKiRet(vm.ConstructFinalize(pVM)); CHKiRet(vm.SetMsg(pVM, pMsg)); CHKiRet(vm.ExecProg(pVM, f->f_filterData.f_expr->pVmprg)); CHKiRet(vm.PopBoolFromStack(pVM, &pResult)); dbgprintf("result of expression evaluation: %lld\n", pResult->val.num); /* VM is destructed on function exit */ bRet = (pResult->val.num) ? 1 : 0; } else { assert(f->f_filter_type == FILTER_PROP); /* assert() just in case... */ pszPropVal = MsgGetProp(pMsg, NULL, f->f_filterData.prop.pCSPropName, &pbMustBeFreed); /* Now do the compares (short list currently ;)) */ switch(f->f_filterData.prop.operation ) { case FIOP_CONTAINS: if(rsCStrLocateInSzStr(f->f_filterData.prop.pCSCompValue, (uchar*) pszPropVal) != -1) bRet = 1; break; case FIOP_ISEQUAL: if(rsCStrSzStrCmp(f->f_filterData.prop.pCSCompValue, (uchar*) pszPropVal, strlen(pszPropVal)) == 0) bRet = 1; /* process message! */ break; case FIOP_STARTSWITH: if(rsCStrSzStrStartsWithCStr(f->f_filterData.prop.pCSCompValue, (uchar*) pszPropVal, strlen(pszPropVal)) == 0) bRet = 1; /* process message! */ break; case FIOP_REGEX: if(rsCStrSzStrMatchRegex(f->f_filterData.prop.pCSCompValue, (unsigned char*) pszPropVal, 0, &f->f_filterData.prop.regex_cache) == RS_RET_OK) bRet = 1; break; case FIOP_EREREGEX: if(rsCStrSzStrMatchRegex(f->f_filterData.prop.pCSCompValue, (unsigned char*) pszPropVal, 1, &f->f_filterData.prop.regex_cache) == RS_RET_OK) bRet = 1; break; default: /* here, it handles NOP (for performance reasons) */ assert(f->f_filterData.prop.operation == FIOP_NOP); bRet = 1; /* as good as any other default ;) */ break; } /* now check if the value must be negated */ if(f->f_filterData.prop.isNegated) bRet = (bRet == 1) ? 0 : 1; if(Debug) { dbgprintf("Filter: check for property '%s' (value '%s') ", rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSPropName), pszPropVal); if(f->f_filterData.prop.isNegated) dbgprintf("NOT "); dbgprintf("%s '%s': %s\n", getFIOPName(f->f_filterData.prop.operation), rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSCompValue), bRet ? "TRUE" : "FALSE"); } /* cleanup */ if(pbMustBeFreed) free(pszPropVal); } finalize_it: /* destruct in any case, not just on error, but it makes error handling much easier */ if(pVM != NULL) vm.Destruct(&pVM); if(pResult != NULL) var.Destruct(&pResult); *bProcessMsg = bRet; RETiRet; } /* helper to processMsg(), used to call the configured actions. It is * executed from within llExecFunc() of the action list. * rgerhards, 2007-08-02 */ typedef struct processMsgDoActions_s { int bPrevWasSuspended; /* was the previous action suspended? */ msg_t *pMsg; } processMsgDoActions_t; DEFFUNC_llExecFunc(processMsgDoActions) { DEFiRet; rsRetVal iRetMod; /* return value of module - we do not always pass that back */ action_t *pAction = (action_t*) pData; processMsgDoActions_t *pDoActData = (processMsgDoActions_t*) pParam; assert(pAction != NULL); if((pAction->bExecWhenPrevSusp == 1) && (pDoActData->bPrevWasSuspended == 0)) { dbgprintf("not calling action because the previous one is not suspended\n"); ABORT_FINALIZE(RS_RET_OK); } iRetMod = actionCallAction(pAction, pDoActData->pMsg); if(iRetMod == RS_RET_DISCARDMSG) { ABORT_FINALIZE(RS_RET_DISCARDMSG); } else if(iRetMod == RS_RET_SUSPENDED) { /* indicate suspension for next module to be called */ pDoActData->bPrevWasSuspended = 1; } else { pDoActData->bPrevWasSuspended = 0; } finalize_it: RETiRet; } /* Process (consume) a received message. Calls the actions configured. * rgerhards, 2005-10-13 */ static void processMsg(msg_t *pMsg) { selector_t *f; int bContinue; int bProcessMsg; processMsgDoActions_t DoActData; rsRetVal iRet; BEGINfunc assert(pMsg != NULL); /* log the message to the particular outputs */ bContinue = 1; for (f = Files; f != NULL && bContinue ; f = f->f_next) { /* first check the filters... */ iRet = shouldProcessThisMessage(f, pMsg, &bProcessMsg); if(!bProcessMsg) { continue; } /* ok -- from here, we have action-specific code, nothing really selector-specific -- rger 2007-08-01 */ DoActData.pMsg = pMsg; DoActData.bPrevWasSuspended = 0; if(llExecFunc(&f->llActList, processMsgDoActions, (void*)&DoActData) == RS_RET_DISCARDMSG) bContinue = 0; } ENDfunc } /* The consumer of dequeued messages. This function is called by the * queue engine on dequeueing of a message. It runs on a SEPARATE * THREAD. * Please note: the message object is destructed by the queue itself! */ static rsRetVal msgConsumer(void __attribute__((unused)) *notNeeded, void *pUsr) { DEFiRet; msg_t *pMsg = (msg_t*) pUsr; assert(pMsg != NULL); if((pMsg->msgFlags & NEEDS_PARSING) != 0) { parseMsg(pMsg); } processMsg(pMsg); msgDestruct(&pMsg); RETiRet; } /* Helper to parseRFCSyslogMsg. This function parses a field up to * (and including) the SP character after it. The field contents is * returned in a caller-provided buffer. The parsepointer is advanced * to after the terminating SP. The caller must ensure that the * provided buffer is large enough to hold the to be extracted value. * Returns 0 if everything is fine or 1 if either the field is not * SP-terminated or any other error occurs. * rger, 2005-11-24 */ static int parseRFCField(uchar **pp2parse, uchar *pResult) { uchar *p2parse; int iRet = 0; assert(pp2parse != NULL); assert(*pp2parse != NULL); assert(pResult != NULL); p2parse = *pp2parse; /* this is the actual parsing loop */ while(*p2parse && *p2parse != ' ') { *pResult++ = *p2parse++; } if(*p2parse == ' ') ++p2parse; /* eat SP, but only if not at end of string */ else iRet = 1; /* there MUST be an SP! */ *pResult = '\0'; /* set the new parse pointer */ *pp2parse = p2parse; return 0; } /* Helper to parseRFCSyslogMsg. This function parses the structured * data field of a message. It does NOT parse inside structured data, * just gets the field as whole. Parsing the single entities is left * to other functions. The parsepointer is advanced * to after the terminating SP. The caller must ensure that the * provided buffer is large enough to hold the to be extracted value. * Returns 0 if everything is fine or 1 if either the field is not * SP-terminated or any other error occurs. * rger, 2005-11-24 */ static int parseRFCStructuredData(uchar **pp2parse, uchar *pResult) { uchar *p2parse; int bCont = 1; int iRet = 0; assert(pp2parse != NULL); assert(*pp2parse != NULL); assert(pResult != NULL); p2parse = *pp2parse; /* this is the actual parsing loop * Remeber: structured data starts with [ and includes any characters * until the first ] followed by a SP. There may be spaces inside * structured data. There may also be \] inside the structured data, which * do NOT terminate an element. */ if(*p2parse != '[') return 1; /* this is NOT structured data! */ if(*p2parse == '-') { /* empty structured data? */ *pResult++ = '-'; ++p2parse; } else { while(bCont) { if(*p2parse == '\0') { iRet = 1; /* this is not valid! */ bCont = 0; } else if(*p2parse == '\\' && *(p2parse+1) == ']') { /* this is escaped, need to copy both */ *pResult++ = *p2parse++; *pResult++ = *p2parse++; } else if(*p2parse == ']' && *(p2parse+1) == ' ') { /* found end, just need to copy the ] and eat the SP */ *pResult++ = *p2parse; p2parse += 2; bCont = 0; } else { *pResult++ = *p2parse++; } } } if(*p2parse == ' ') ++p2parse; /* eat SP, but only if not at end of string */ else iRet = 1; /* there MUST be an SP! */ *pResult = '\0'; /* set the new parse pointer */ *pp2parse = p2parse; return 0; } /* parse a RFC-formatted syslog message. This function returns * 0 if processing of the message shall continue and 1 if something * went wrong and this messe should be ignored. This function has been * implemented in the effort to support syslog-protocol. Please note that * the name (parse *RFC*) stems from the hope that syslog-protocol will * some time become an RFC. Do not confuse this with informational * RFC 3164 (which is legacy syslog). * * currently supported format: * * VERSION SP TIMESTAMP SP HOSTNAME SP APP-NAME SP PROCID SP MSGID SP [SD-ID]s SP MSG * * is already stripped when this function is entered. VERSION already * has been confirmed to be "1", but has NOT been stripped from the message. * * rger, 2005-11-24 */ int parseRFCSyslogMsg(msg_t *pMsg, int flags) { uchar *p2parse; uchar *pBuf; int bContParse = 1; BEGINfunc assert(pMsg != NULL); assert(pMsg->pszUxTradMsg != NULL); p2parse = pMsg->pszUxTradMsg; /* do a sanity check on the version and eat it */ assert(p2parse[0] == '1' && p2parse[1] == ' '); p2parse += 2; /* Now get us some memory we can use as a work buffer while parsing. * We simply allocated a buffer sufficiently large to hold all of the * message, so we can not run into any troubles. I think this is * more wise then to use individual buffers. */ if((pBuf = malloc(sizeof(uchar) * ustrlen(p2parse) + 1)) == NULL) return 1; /* IMPORTANT NOTE: * Validation is not actually done below nor are any errors handled. I have * NOT included this for the current proof of concept. However, it is strongly * advisable to add it when this code actually goes into production. * rgerhards, 2005-11-24 */ /* TIMESTAMP */ if(datetime.ParseTIMESTAMP3339(&(pMsg->tTIMESTAMP), &p2parse) == RS_RET_OK) { if(flags & IGNDATE) { /* we need to ignore the msg data, so simply copy over reception date */ memcpy(&pMsg->tTIMESTAMP, &pMsg->tRcvdAt, sizeof(struct syslogTime)); } } else { dbgprintf("no TIMESTAMP detected!\n"); bContParse = 0; } /* HOSTNAME */ if(bContParse) { parseRFCField(&p2parse, pBuf); MsgSetHOSTNAME(pMsg, pBuf); } else { /* we can not parse, so we get the system we * received the data from. */ MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } /* APP-NAME */ if(bContParse) { parseRFCField(&p2parse, pBuf); MsgSetAPPNAME(pMsg, (char*)pBuf); } /* PROCID */ if(bContParse) { parseRFCField(&p2parse, pBuf); MsgSetPROCID(pMsg, (char*)pBuf); } /* MSGID */ if(bContParse) { parseRFCField(&p2parse, pBuf); MsgSetMSGID(pMsg, (char*)pBuf); } /* STRUCTURED-DATA */ if(bContParse) { parseRFCStructuredData(&p2parse, pBuf); MsgSetStructuredData(pMsg, (char*)pBuf); } /* MSG */ MsgSetMSG(pMsg, (char*)p2parse); free(pBuf); ENDfunc return 0; /* all ok */ } /* parse a legay-formatted syslog message. This function returns * 0 if processing of the message shall continue and 1 if something * went wrong and this messe should be ignored. This function has been * implemented in the effort to support syslog-protocol. * rger, 2005-11-24 * As of 2006-01-10, I am removing the logic to continue parsing only * when a valid TIMESTAMP is detected. Validity of other fields already * is ignored. This is due to the fact that the parser has grown smarter * and is now more able to understand different dialects of the syslog * message format. I do not expect any bad side effects of this change, * but I thought I log it in this comment. * rgerhards, 2006-01-10 */ int parseLegacySyslogMsg(msg_t *pMsg, int flags) { uchar *p2parse; char *pBuf; char *pWork; cstr_t *pStrB; int iCnt; int bTAGCharDetected; BEGINfunc assert(pMsg != NULL); assert(pMsg->pszUxTradMsg != NULL); p2parse = pMsg->pszUxTradMsg; /* Check to see if msg contains a timestamp. We start by assuming * that the message timestamp is the time of reciption (which we * generated ourselfs and then try to actually find one inside the * message. There we go from high-to low precison and are done * when we find a matching one. -- rgerhards, 2008-09-16 */ if(datetime.ParseTIMESTAMP3339(&(pMsg->tTIMESTAMP), &p2parse) == RS_RET_OK) { /* we are done - parse pointer is moved by ParseTIMESTAMP3339 */; } else if(datetime.ParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), &p2parse) == RS_RET_OK) { /* we are done - parse pointer is moved by ParseTIMESTAMP3164 */; } else if(*p2parse == ' ') { /* try to see if it is slighly malformed - HP procurve seems to do that sometimes */ ++p2parse; /* move over space */ if(datetime.ParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), &p2parse) == RS_RET_OK) { /* indeed, we got it! */ /* we are done - parse pointer is moved by ParseTIMESTAMP3164 */; } else { /* parse pointer needs to be restored, as we moved it off-by-one * for this try. */ --p2parse; } } if(flags & IGNDATE) { /* we need to ignore the msg data, so simply copy over reception date */ memcpy(&pMsg->tTIMESTAMP, &pMsg->tRcvdAt, sizeof(struct syslogTime)); } /* rgerhards, 2006-03-13: next, we parse the hostname and tag. But we * do this only when the user has not forbidden this. I now introduce some * code that allows a user to configure rsyslogd to treat the rest of the * message as MSG part completely. In this case, the hostname will be the * machine that we received the message from and the tag will be empty. This * is meant to be an interim solution, but for now it is in the code. */ if(bParseHOSTNAMEandTAG && !(flags & INTERNAL_MSG)) { /* parse HOSTNAME - but only if this is network-received! * rger, 2005-11-14: we still have a problem with BSD messages. These messages * do NOT include a host name. In most cases, this leads to the TAG to be treated * as hostname and the first word of the message as the TAG. Clearly, this is not * of advantage ;) I think I have now found a way to handle this situation: there * are certain characters which are frequently used in TAG (e.g. ':'), which are * *invalid* in host names. So while parsing the hostname, I check for these characters. * If I find them, I set a simple flag but continue. After parsing, I check the flag. * If it was set, then we most probably do not have a hostname but a TAG. Thus, I change * the fields. I think this logic shall work with any type of syslog message. */ bTAGCharDetected = 0; if(flags & PARSE_HOSTNAME) { /* TODO: quick and dirty memory allocation */ /* the memory allocated is far too much in most cases. But on the plus side, * it is quite fast... - rgerhards, 2007-09-20 */ if((pBuf = malloc(sizeof(char)* (ustrlen(p2parse) +1))) == NULL) return 1; pWork = pBuf; /* this is the actual parsing loop */ while(*p2parse && *p2parse != ' ' && *p2parse != ':') { if(*p2parse == '[' || *p2parse == ']' || *p2parse == '/') bTAGCharDetected = 1; *pWork++ = *p2parse++; } /* we need to handle ':' seperately, because it terminates the * TAG - so we also need to terminate the parser here! * rgerhards, 2007-09-10 *p2parse points to a valid address here in * any case. We can reach this point only if we are at end of string, * or we have a ':' or ' '. What the if below does is check if we are * not at end of string and, if so, advance the parse pointer. If we * are already at end of string, *p2parse is equal to '\0', neither if * will be true and the parse pointer remain as is. This is perfectly * well. */ if(*p2parse == ':') { bTAGCharDetected = 1; /* We will move hostname to tag, so preserve ':' (otherwise we * will needlessly change the message format) */ *pWork++ = *p2parse++; } else if(*p2parse == ' ') ++p2parse; *pWork = '\0'; MsgAssignHOSTNAME(pMsg, pBuf); } /* check if we seem to have a TAG */ if(bTAGCharDetected) { /* indeed, this smells like a TAG, so lets use it for this. We take * the HOSTNAME from the sender system instead. */ dbgprintf("HOSTNAME contains invalid characters, assuming it to be a TAG.\n"); moveHOSTNAMEtoTAG(pMsg); MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } /* now parse TAG - that should be present in message from all sources. * This code is somewhat not compliant with RFC 3164. As of 3164, * the TAG field is ended by any non-alphanumeric character. In * practice, however, the TAG often contains dashes and other things, * which would end the TAG. So it is not desirable. As such, we only * accept colon and SP to be terminators. Even there is a slight difference: * a colon is PART of the TAG, while a SP is NOT part of the tag * (it is CONTENT). Starting 2008-04-04, we have removed the 32 character * size limit (from RFC3164) on the tag. This had bad effects on existing * envrionments, as sysklogd didn't obey it either (probably another bug * in RFC3164...). We now receive the full size, but will modify the * outputs so that only 32 characters max are used by default. */ /* The following code in general is quick & dirty - I need to get * it going for a test, rgerhards 2004-11-16 */ /* lol.. we tried to solve it, just to remind ourselfs that 32 octets * is the max size ;) we need to shuffle the code again... Just for * the records: the code is currently clean, but we could optimize it! */ if(!bTAGCharDetected) { uchar *pszTAG; if(rsCStrConstruct(&pStrB) != RS_RET_OK) return 1; rsCStrSetAllocIncrement(pStrB, 33); pWork = pBuf; iCnt = 0; while(*p2parse && *p2parse != ':' && *p2parse != ' ') { rsCStrAppendChar(pStrB, *p2parse++); ++iCnt; } if(*p2parse == ':') { ++p2parse; rsCStrAppendChar(pStrB, ':'); } rsCStrFinish(pStrB); rsCStrConvSzStrAndDestruct(pStrB, &pszTAG, 1); if(pszTAG == NULL) { /* rger, 2005-11-10: no TAG found - this implies that what * we have considered to be the HOSTNAME is most probably the * TAG. We consider it so probable, that we now adjust it * that way. So we pick up the previously set hostname, assign * it to tag and use the sender system (from IP stack) as * the hostname. This situation is the standard case with * stock BSD syslogd. */ dbgprintf("No TAG in message, assuming that HOSTNAME is missing.\n"); moveHOSTNAMEtoTAG(pMsg); MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } else { /* we have a TAG, so we can happily set it ;) */ MsgAssignTAG(pMsg, pszTAG); } } else { /* we have no TAG, so we ... */ /*DO NOTHING*/; } } else { /* we enter this code area when the user has instructed rsyslog NOT * to parse HOSTNAME and TAG - rgerhards, 2006-03-13 */ if(!(flags & INTERNAL_MSG)) { dbgprintf("HOSTNAME and TAG not parsed by user configuraton.\n"); MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } } /* The rest is the actual MSG */ MsgSetMSG(pMsg, (char*)p2parse); ENDfunc return 0; /* all ok */ } /* submit a fully created message to the main message queue. The message is * fully processed and parsed, so no parsing at all happens. This is primarily * a hook to prevent the need for callers to know about the main message queue * (which may change in the future as we will probably have multiple rule * sets and thus queues...). * rgerhards, 2008-02-13 */ rsRetVal submitMsg(msg_t *pMsg) { DEFiRet; ISOBJ_TYPE_assert(pMsg, msg); MsgPrepareEnqueue(pMsg); qqueueEnqObj(pMsgQueue, pMsg->flowCtlType, (void*) pMsg); RETiRet; } /* Log a message to the appropriate log files, users, etc. based on * the priority. * rgerhards 2004-11-08: actually, this also decodes all but the PRI part. * rgerhards 2004-11-09: ... but only, if syslogd could properly be initialized * if not, we use emergency logging to the console and in * this case, no further decoding happens. * changed to no longer receive a plain message but a msg object instead. * rgerhards-2004-11-16: OK, we are now up to another change... This method * actually needs to PARSE the message. How exactly this needs to happen depends on * a number of things. Most importantly, it depends on the source. For example, * locally received messages (SOURCE_UNIXAF) do NOT have a hostname in them. So * we need to treat them differntly form network-received messages which have. * Well, actually not all network-received message really have a hostname. We * can just hope they do, but we can not be sure. So this method tries to find * whatever can be found in the message and uses that... Obviously, there is some * potential for misinterpretation, which we simply can not solve under the * circumstances given. */ void logmsg(msg_t *pMsg, int flags) { char *msg; BEGINfunc assert(pMsg != NULL); assert(pMsg->pszUxTradMsg != NULL); msg = (char*) pMsg->pszUxTradMsg; dbgprintf("logmsg: flags %x, from '%s', msg %s\n", flags, getRcvFrom(pMsg), msg); /* rger 2005-11-24 (happy thanksgiving!): we now need to check if we have * a traditional syslog message or one formatted according to syslog-protocol. * We need to apply different parsers depending on that. We use the * -protocol VERSION field for the detection. */ if(msg[0] == '1' && msg[1] == ' ') { dbgprintf("Message has syslog-protocol format.\n"); setProtocolVersion(pMsg, 1); if(parseRFCSyslogMsg(pMsg, flags) == 1) { msgDestruct(&pMsg); return; } } else { /* we have legacy syslog */ dbgprintf("Message has legacy syslog format.\n"); setProtocolVersion(pMsg, 0); if(parseLegacySyslogMsg(pMsg, flags) == 1) { msgDestruct(&pMsg); return; } } /* ---------------------- END PARSING ---------------- */ /* now submit the message to the main queue - then we are done */ pMsg->msgFlags = flags; MsgPrepareEnqueue(pMsg); qqueueEnqObj(pMsgQueue, pMsg->flowCtlType, (void*) pMsg); ENDfunc } static void reapchild() { int saved_errno = errno; struct sigaction sigAct; memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = reapchild; sigaction(SIGCHLD, &sigAct, NULL); /* reset signal handler -ASP */ while(waitpid(-1, NULL, WNOHANG) > 0); errno = saved_errno; } /* helper to doFlushRptdMsgs() to flush the individual action links via llExecFunc * rgerhards, 2007-08-02 */ DEFFUNC_llExecFunc(flushRptdMsgsActions) { action_t *pAction = (action_t*) pData; assert(pAction != NULL); BEGINfunc LockObj(pAction); /* TODO: time() performance: the call below could be moved to * the beginn of the llExec(). This makes it slightly less correct, but * in an acceptable way. -- rgerhards, 2008-09-16 */ if (pAction->f_prevcount && time(NULL) >= REPEATTIME(pAction)) { dbgprintf("flush %s: repeated %d times, %d sec.\n", module.GetStateName(pAction->pMod), pAction->f_prevcount, repeatinterval[pAction->f_repeatcount]); actionWriteToAction(pAction); BACKOFF(pAction); } UnlockObj(pAction); ENDfunc return RS_RET_OK; /* we ignore errors, we can not do anything either way */ } /* This method flushes reapeat messages. */ static void doFlushRptdMsgs(void) { register selector_t *f; /* see if we need to flush any "message repeated n times"... * Note that this interferes with objects running on other threads. * We are using appropriate locking inside the function to handle that. */ for (f = Files; f != NULL ; f = f->f_next) { llExecFunc(&f->llActList, flushRptdMsgsActions, NULL); } } static void debug_switch() { struct sigaction sigAct; if(debugging_on == 0) { debugging_on = 1; dbgprintf("Switching debugging_on to true\n"); } else { dbgprintf("Switching debugging_on to false\n"); debugging_on = 0; } memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = debug_switch; sigaction(SIGUSR1, &sigAct, NULL); } void legacyOptsEnq(uchar *line) { legacyOptsLL_t *pNew; pNew = malloc(sizeof(legacyOptsLL_t)); if(line == NULL) pNew->line = NULL; else pNew->line = (uchar *) strdup((char *) line); pNew->next = NULL; if(pLegacyOptsLL == NULL) pLegacyOptsLL = pNew; else { legacyOptsLL_t *pThis = pLegacyOptsLL; while(pThis->next != NULL) pThis = pThis->next; pThis->next = pNew; } } void legacyOptsFree(void) { legacyOptsLL_t *pThis = pLegacyOptsLL, *pNext; while(pThis != NULL) { if(pThis->line != NULL) free(pThis->line); pNext = pThis->next; free(pThis); pThis = pNext; } } void legacyOptsHook(void) { legacyOptsLL_t *pThis = pLegacyOptsLL; while(pThis != NULL) { if(pThis->line != NULL) { errno = 0; errmsg.LogError(0, NO_ERRCODE, "Warning: backward compatibility layer added to following " "directive to rsyslog.conf: %s", pThis->line); conf.cfsysline(pThis->line); } pThis = pThis->next; } } void legacyOptsParseTCP(char ch, char *arg) { register int i; register char *pArg = arg; static char conflict = '\0'; if((conflict == 'g' && ch == 't') || (conflict == 't' && ch == 'g')) { fprintf(stderr, "rsyslogd: If you want to use both -g and -t, use directives instead, -%c ignored.\n", ch); return; } else conflict = ch; /* extract port */ i = 0; while(isdigit((int) *pArg)) i = i * 10 + *pArg++ - '0'; /* number of sessions */ if(*pArg == '\0' || *pArg == ',') { if(ch == 't') legacyOptsEnq((uchar *) "ModLoad imtcp"); else if(ch == 'g') legacyOptsEnq((uchar *) "ModLoad imgssapi"); if(i >= 0 && i <= 65535) { uchar line[30]; if(ch == 't') { snprintf((char *) line, sizeof(line), "InputTCPServerRun %d", i); } else if(ch == 'g') { snprintf((char *) line, sizeof(line), "InputGSSServerRun %d", i); } legacyOptsEnq(line); } else { if(ch == 't') { fprintf(stderr, "rsyslogd: Invalid TCP listen port %d - changed to 514.\n", i); legacyOptsEnq((uchar *) "InputTCPServerRun 514"); } else if(ch == 'g') { fprintf(stderr, "rsyslogd: Invalid GSS listen port %d - changed to 514.\n", i); legacyOptsEnq((uchar *) "InputGSSServerRun 514"); } } if(*pArg == ',') { ++pArg; while(isspace((int) *pArg)) ++pArg; i = 0; while(isdigit((int) *pArg)) { i = i * 10 + *pArg++ - '0'; } if(i > 0) { uchar line[30]; snprintf((char *) line, sizeof(line), "InputTCPMaxSessions %d", i); legacyOptsEnq(line); } else { if(ch == 't') { fprintf(stderr, "rsyslogd: TCP session max configured " "to %d [-t %s] - changing to 1.\n", i, arg); legacyOptsEnq((uchar *) "InputTCPMaxSessions 1"); } else if (ch == 'g') { fprintf(stderr, "rsyslogd: GSS session max configured " "to %d [-g %s] - changing to 1.\n", i, arg); legacyOptsEnq((uchar *) "InputTCPMaxSessions 1"); } } } } else fprintf(stderr, "rsyslogd: Invalid -t %s command line option.\n", arg); } /* doDie() is a signal handler. If called, it sets the bFinished variable * to indicate the program should terminate. However, it does not terminate * it itself, because that causes issues with multi-threading. The actual * termination is then done on the main thread. This solution might introduce * a minimal delay, but it is much cleaner than the approach of doing everything * inside the signal handler. * rgerhards, 2005-10-26 * Note: we do not call dbgprintf() as this may cause us to block in case something * with the threading is wrong. */ static void doDie(int sig) { # define MSG1 "DoDie called.\n" # define MSG2 "DoDie called 5 times - unconditional exit\n" static int iRetries = 0; /* debug aid */ if(Debug) write(1, MSG1, sizeof(MSG1) - 1); if(iRetries++ == 4) { if(Debug) write(1, MSG2, sizeof(MSG2) - 1); abort(); } bFinished = sig; # undef MSG1 # undef MSG2 } /* This function frees all dynamically allocated memory for program termination. * It must be called only immediately before exit(). It is primarily an aid * for memory debuggers, which prevents cluttered outupt. * rgerhards, 2008-03-20 */ static void freeAllDynMemForTermination(void) { free(pszMainMsgQFName); free(pModDir); free(pszConfDAGFile); } /* die() is called when the program shall end. This typically only occurs * during sigterm or during the initialization. * As die() is intended to shutdown rsyslogd, it is * safe to call exit() here. Just make sure that die() itself is not called * at inapropriate places. As a general rule of thumb, it is a bad idea to add * any calls to die() in new code! * rgerhards, 2005-10-24 */ static void die(int sig) { char buf[256]; dbgprintf("exiting on signal %d\n", sig); /* IMPORTANT: we should close the inputs first, and THEN send our termination * message. If we do it the other way around, logmsgInternal() may block on * a full queue and the inputs still fill up that queue. Depending on the * scheduling order, we may end up with logmsgInternal being held for a quite * long time. When the inputs are terminated first, that should not happen * because the queue is drained in parallel. The situation could only become * an issue with extremely long running actions in a queue full environment. * However, such actions are at least considered poorly written, if not * outright wrong. So we do not care about this very remote problem. * rgerhards, 2008-01-11 */ /* close the inputs */ dbgprintf("Terminating input threads...\n"); thrdTerminateAll(); /* and THEN send the termination log message (see long comment above) */ if (sig) { (void) snprintf(buf, sizeof(buf) / sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"]" " exiting on signal %d.", (int) myPid, sig); errno = 0; logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*)buf, 0); } /* drain queue (if configured so) and stop main queue worker thread pool */ dbgprintf("Terminating main queue...\n"); qqueueDestruct(&pMsgQueue); pMsgQueue = NULL; /* Free ressources and close connections. This includes flushing any remaining * repeated msgs. */ dbgprintf("Terminating outputs...\n"); freeSelectors(); dbgprintf("all primary multi-thread sources have been terminated - now doing aux cleanup...\n"); /* rger 2005-02-22 * now clean up the in-memory structures. OK, the OS * would also take care of that, but if we do it * ourselfs, this makes finding memory leaks a lot * easier. */ tplDeleteAll(); remove_pid(PidFile); /* de-init some modules */ modExitIminternal(); /*dbgPrintAllDebugInfo(); / * this is the last spot where this can be done - below output modules are unloaded! */ /* the following line cleans up CfSysLineHandlers that were not based on loadable * modules. As such, they are not yet cleared. */ unregCfSysLineHdlrs(); legacyOptsFree(); /* terminate the remaining classes */ GlobalClassExit(); /* TODO: this would also be the right place to de-init the builtin output modules. We * do not currently do that, because the module interface does not allow for * it. This will come some time later (it's essential with loadable modules). * For the time being, this is a memory leak on exit, but as the process is * terminated, we do not really bother about it. * rgerhards, 2007-08-03 * I have added some code now, but all that mod init/de-init should be moved to * init, so that modules are unloaded and reloaded on HUP to. Eventually it should go * into freeSelectors() - but that needs to be seen. -- rgerhards, 2007-08-09 */ module.UnloadAndDestructAll(eMOD_LINK_ALL); dbgprintf("Clean shutdown completed, bye\n"); /* dbgClassExit MUST be the last one, because it de-inits the debug system */ dbgClassExit(); /* free all remaining memory blocks - this is not absolutely necessary, but helps * us keep memory debugger logs clean and this is in aid in developing. It doesn't * cost much time, so we do it always. -- rgerhards, 2008-03-20 */ freeAllDynMemForTermination(); /* NO CODE HERE - feeelAllDynMemForTermination() must be the last thing before exit()! */ exit(0); /* "good" exit, this is the terminator function for rsyslog [die()] */ } /* * Signal handler to terminate the parent process. * rgerhards, 2005-10-24: this is only called during forking of the * detached syslogd. I consider this method to be safe. */ static void doexit() { exit(0); /* "good" exit, only during child-creation */ } /* set the maximum message size */ static rsRetVal setMaxMsgSize(void __attribute__((unused)) *pVal, int iNewVal) { return glbl.SetMaxLine(iNewVal); } /* set the action resume interval */ static rsRetVal setActionResumeInterval(void __attribute__((unused)) *pVal, int iNewVal) { return actionSetGlobalResumeInterval(iNewVal); } /* set the processes max number ob files (upon configuration request) * 2009-04-14 rgerhards */ static rsRetVal setMaxFiles(void __attribute__((unused)) *pVal, int iFiles) { struct rlimit maxFiles; char errStr[1024]; DEFiRet; maxFiles.rlim_cur = iFiles; maxFiles.rlim_max = iFiles; if(setrlimit(RLIMIT_NOFILE, &maxFiles) < 0) { /* NOTE: under valgrind, we seem to be unable to extend the size! */ rs_strerror_r(errno, errStr, sizeof(errStr)); errmsg.LogError(0, RS_RET_ERR_RLIM_NOFILE, "could not set process file limit to %d: %s [kernel max %ld]", iFiles, errStr, (long) maxFiles.rlim_max); ABORT_FINALIZE(RS_RET_ERR_RLIM_NOFILE); } dbgprintf("Max number of files set to %d [kernel max %ld].\n", iFiles, (long) maxFiles.rlim_max); finalize_it: RETiRet; } /* set the processes umask (upon configuration request) */ static rsRetVal setUmask(void __attribute__((unused)) *pVal, int iUmask) { umask(iUmask); dbgprintf("umask set to 0%3.3o.\n", iUmask); return RS_RET_OK; } /* drop to specified group * if something goes wrong, the function never returns * Note that such an abort can cause damage to on-disk structures, so we should * re-design the "interface" in the long term. -- rgerhards, 2008-11-26 */ static void doDropPrivGid(int iGid) { int res; uchar szBuf[1024]; res = setgroups(0, NULL); /* remove all supplementary group IDs */ if(res) { perror("could not remove supplemental group IDs"); exit(1); } DBGPRINTF("setgroups(0, NULL): %d\n", res); res = setgid(iGid); if(res) { /* if we can not set the userid, this is fatal, so let's unconditionally abort */ perror("could not set requested group id"); exit(1); } DBGPRINTF("setgid(%d): %d\n", iGid, res); snprintf((char*)szBuf, sizeof(szBuf)/sizeof(uchar), "rsyslogd's groupid changed to %d", iGid); logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, szBuf, 0); } /* drop to specified user * if something goes wrong, the function never returns * Note that such an abort can cause damage to on-disk structures, so we should * re-design the "interface" in the long term. -- rgerhards, 2008-11-19 */ static void doDropPrivUid(int iUid) { int res; uchar szBuf[1024]; res = setuid(iUid); if(res) { /* if we can not set the userid, this is fatal, so let's unconditionally abort */ perror("could not set requested userid"); exit(1); } DBGPRINTF("setuid(%d): %d\n", iUid, res); snprintf((char*)szBuf, sizeof(szBuf)/sizeof(uchar), "rsyslogd's userid changed to %d", iUid); logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, szBuf, 0); } /* helper to freeSelectors(), used with llExecFunc() to flush * pending output. -- rgerhards, 2007-08-02 * We do not need to lock the action object here as the processing * queue is already empty and no other threads are running when * we call this function. -- rgerhards, 2007-12-12 */ DEFFUNC_llExecFunc(freeSelectorsActions) { action_t *pAction = (action_t*) pData; assert(pAction != NULL); /* flush any pending output */ if(pAction->f_prevcount) { actionWriteToAction(pAction); } return RS_RET_OK; /* never fails ;) */ } /* Close all open log files and free selector descriptor array. */ static void freeSelectors(void) { selector_t *f; selector_t *fPrev; if(Files != NULL) { dbgprintf("Freeing log structures.\n"); for(f = Files ; f != NULL ; f = f->f_next) { llExecFunc(&f->llActList, freeSelectorsActions, NULL); } /* actions flushed and ready for destruction - so do that... */ f = Files; while (f != NULL) { fPrev = f; f = f->f_next; selectorDestruct(fPrev); } /* Reflect the deletion of the selectors linked list. */ Files = NULL; bHaveMainQueue = 0; } } /* helper to generateConfigDAG, to print out all actions via * the llExecFunc() facility. * rgerhards, 2007-08-02 */ struct dag_info { FILE *fp; /* output file */ int iActUnit; /* current action unit number */ int iAct; /* current action in unit */ int bDiscarded; /* message discarded (config error) */ }; DEFFUNC_llExecFunc(generateConfigDAGAction) { action_t *pAction; uchar *pszModName; uchar *pszVertexName; struct dag_info *pDagInfo; DEFiRet; pDagInfo = (struct dag_info*) pParam; pAction = (action_t*) pData; pszModName = module.GetStateName(pAction->pMod); /* vertex */ if(pAction->pszName == NULL) { if(!strcmp((char*)pszModName, "builtin-discard")) pszVertexName = (uchar*)"discard"; else pszVertexName = pszModName; } else { pszVertexName = pAction->pszName; } fprintf(pDagInfo->fp, "\tact%d_%d\t\t[label=\"%s\"%s%s]\n", pDagInfo->iActUnit, pDagInfo->iAct, pszVertexName, pDagInfo->bDiscarded ? " style=dotted color=red" : "", (pAction->pQueue->qType == QUEUETYPE_DIRECT) ? "" : " shape=hexagon" ); /* edge */ if(pDagInfo->iAct == 0) { } else { fprintf(pDagInfo->fp, "\tact%d_%d -> act%d_%d[%s%s]\n", pDagInfo->iActUnit, pDagInfo->iAct - 1, pDagInfo->iActUnit, pDagInfo->iAct, pDagInfo->bDiscarded ? " style=dotted color=red" : "", pAction->bExecWhenPrevSusp ? " label=\"only if\\nsuspended\"" : "" ); } /* check for discard */ if(!strcmp((char*) pszModName, "builtin-discard")) { fprintf(pDagInfo->fp, "\tact%d_%d\t\t[shape=box]\n", pDagInfo->iActUnit, pDagInfo->iAct); pDagInfo->bDiscarded = 1; } ++pDagInfo->iAct; RETiRet; } /* create config DAG * This functions takes a rsyslog config and produces a .dot file for use * with graphviz (http://www.graphviz.org). This is done in an effort to * document, and also potentially troubleshoot, configurations. Plus, I * consider it a nice feature to explain some concepts. Note that the * current version only produces a graph with relatively little information. * This is a foundation that may be later expanded (if it turns out to be * useful enough). * rgerhards, 2009-05-11 */ static rsRetVal generateConfigDAG(uchar *pszDAGFile) { selector_t *f; FILE *fp; int iActUnit = 1; int bHasFilter = 0; /* filter associated with this action unit? */ int bHadFilter; int i; struct dag_info dagInfo; char *pszFilterName; char szConnectingNode[64]; DEFiRet; assert(pszDAGFile != NULL); if((fp = fopen((char*) pszDAGFile, "w")) == NULL) { logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*) "configuraton graph output file could not be opened, none generated", 0); ABORT_FINALIZE(RS_RET_FILENAME_INVALID); } dagInfo.fp = fp; /* from here on, we assume writes go well. This here is a really * unimportant utility function and if something goes wrong, it has * almost no effect. So let's not overdo this... */ fprintf(fp, "# graph created by rsyslog " VERSION "\n\n" "# use the dot tool from http://www.graphviz.org to visualize!\n" "digraph rsyslogConfig {\n" "\tinputs [shape=tripleoctagon]\n" "\tinputs -> act0_0\n" "\tact0_0 [label=\"main\\nqueue\" shape=hexagon]\n" /*"\tmainq -> act1_0\n"*/ ); strcpy(szConnectingNode, "act0_0"); dagInfo.bDiscarded = 0; for(f = Files; f != NULL ; f = f->f_next) { /* BSD-Style filters are currently ignored */ bHadFilter = bHasFilter; if(f->f_filter_type == FILTER_PRI) { bHasFilter = 0; for (i = 0; i <= LOG_NFACILITIES; i++) if (f->f_filterData.f_pmask[i] != 0xff) { bHasFilter = 1; break; } } else { bHasFilter = 1; } /* we know we have a filter, so it can be false */ switch(f->f_filter_type) { case FILTER_PRI: pszFilterName = "pri filter"; break; case FILTER_PROP: pszFilterName = "property filter"; break; case FILTER_EXPR: pszFilterName = "script filter"; break; } /* write action unit node */ if(bHasFilter) { fprintf(fp, "\t%s -> act%d_end\t[label=\"%s:\\nfalse\"]\n", szConnectingNode, iActUnit, pszFilterName); fprintf(fp, "\t%s -> act%d_0\t[label=\"%s:\\ntrue\"]\n", szConnectingNode, iActUnit, pszFilterName); fprintf(fp, "\tact%d_end\t\t\t\t[shape=point]\n", iActUnit); snprintf(szConnectingNode, sizeof(szConnectingNode), "act%d_end", iActUnit); } else { fprintf(fp, "\t%s -> act%d_0\t[label=\"no filter\"]\n", szConnectingNode, iActUnit); snprintf(szConnectingNode, sizeof(szConnectingNode), "act%d_0", iActUnit); } /* draw individual nodes */ dagInfo.iActUnit = iActUnit; dagInfo.iAct = 0; dagInfo.bDiscarded = 0; llExecFunc(&f->llActList, generateConfigDAGAction, &dagInfo); /* actions */ /* finish up */ if(bHasFilter && !dagInfo.bDiscarded) { fprintf(fp, "\tact%d_%d -> %s\n", iActUnit, dagInfo.iAct - 1, szConnectingNode); } ++iActUnit; } fprintf(fp, "\t%s -> act%d_0\n", szConnectingNode, iActUnit); fprintf(fp, "\tact%d_0\t\t[label=discard shape=box]\n" "}\n", iActUnit); fclose(fp); finalize_it: RETiRet; } /* helper to dbPrintInitInfo, to print out all actions via * the llExecFunc() facility. * rgerhards, 2007-08-02 */ DEFFUNC_llExecFunc(dbgPrintInitInfoAction) { DEFiRet; iRet = actionDbgPrint((action_t*) pData); dbgprintf("\n"); RETiRet; } /* print debug information as part of init(). This pretty much * outputs the whole config of rsyslogd. I've moved this code * out of init() to clean it somewhat up. * rgerhards, 2007-07-31 */ static void dbgPrintInitInfo(void) { selector_t *f; int iSelNbr = 1; int i; dbgprintf("\nActive selectors:\n"); for (f = Files; f != NULL ; f = f->f_next) { dbgprintf("Selector %d:\n", iSelNbr++); if(f->pCSProgNameComp != NULL) dbgprintf("tag: '%s'\n", rsCStrGetSzStrNoNULL(f->pCSProgNameComp)); if(f->eHostnameCmpMode != HN_NO_COMP) dbgprintf("hostname: %s '%s'\n", f->eHostnameCmpMode == HN_COMP_MATCH ? "only" : "allbut", rsCStrGetSzStrNoNULL(f->pCSHostnameComp)); if(f->f_filter_type == FILTER_PRI) { for (i = 0; i <= LOG_NFACILITIES; i++) if (f->f_filterData.f_pmask[i] == TABLE_NOPRI) dbgprintf(" X "); else dbgprintf("%2X ", f->f_filterData.f_pmask[i]); } else if(f->f_filter_type == FILTER_EXPR) { dbgprintf("EXPRESSION-BASED Filter: can currently not be displayed"); } else { dbgprintf("PROPERTY-BASED Filter:\n"); dbgprintf("\tProperty.: '%s'\n", rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSPropName)); dbgprintf("\tOperation: "); if(f->f_filterData.prop.isNegated) dbgprintf("NOT "); dbgprintf("'%s'\n", getFIOPName(f->f_filterData.prop.operation)); dbgprintf("\tValue....: '%s'\n", rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSCompValue)); dbgprintf("\tAction...: "); } dbgprintf("\nActions:\n"); llExecFunc(&f->llActList, dbgPrintInitInfoAction, NULL); /* actions */ dbgprintf("\n"); } dbgprintf("\n"); if(bDebugPrintTemplateList) tplPrintList(); if(bDebugPrintModuleList) module.PrintList(); ochPrintList(); if(bDebugPrintCfSysLineHandlerList) dbgPrintCfSysLineHandlers(); dbgprintf("Messages with malicious PTR DNS Records are %sdropped.\n", glbl.GetDropMalPTRMsgs() ? "" : "not "); dbgprintf("Control characters are %sreplaced upon reception.\n", bEscapeCCOnRcv? "" : "not "); if(bEscapeCCOnRcv) dbgprintf("Control character escape sequence prefix is '%c'.\n", cCCEscapeChar); dbgprintf("Main queue size %d messages.\n", iMainMsgQueueSize); dbgprintf("Main queue worker threads: %d, wThread shutdown: %d, Perists every %d updates.\n", iMainMsgQueueNumWorkers, iMainMsgQtoWrkShutdown, iMainMsgQPersistUpdCnt); dbgprintf("Main queue timeouts: shutdown: %d, action completion shutdown: %d, enq: %d\n", iMainMsgQtoQShutdown, iMainMsgQtoActShutdown, iMainMsgQtoEnq); dbgprintf("Main queue watermarks: high: %d, low: %d, discard: %d, discard-severity: %d\n", iMainMsgQHighWtrMark, iMainMsgQLowWtrMark, iMainMsgQDiscardMark, iMainMsgQDiscardSeverity); dbgprintf("Main queue save on shutdown %d, max disk space allowed %lld\n", bMainMsgQSaveOnShutdown, iMainMsgQueMaxDiskSpace); /* TODO: add iActionRetryCount = 0; iActionRetryInterval = 30000; static int iMainMsgQtoWrkMinMsgs = 100; static int iMainMsgQbSaveOnShutdown = 1; iMainMsgQueMaxDiskSpace = 0; setQPROP(qqueueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", 100); setQPROP(qqueueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", 1); */ dbgprintf("Work Directory: '%s'.\n", glbl.GetWorkDir()); } /* Start the input modules. This function will probably undergo big changes * while we implement the input module interface. For now, it does the most * important thing to get at least my poor initial input modules up and * running. Almost no config option is taken. * rgerhards, 2007-12-14 */ static rsRetVal startInputModules(void) { DEFiRet; modInfo_t *pMod; /* loop through all modules and activate them (brr...) */ pMod = module.GetNxtType(NULL, eMOD_IN); while(pMod != NULL) { if((iRet = pMod->mod.im.willRun()) == RS_RET_OK) { /* activate here */ thrdCreate(pMod->mod.im.runInput, pMod->mod.im.afterRun); } else { dbgprintf("module %lx will not run, iRet %d\n", (unsigned long) pMod, iRet); } pMod = module.GetNxtType(pMod, eMOD_IN); } ENDfunc return RS_RET_OK; /* intentional: we do not care about module errors */ } /* INIT -- Initialize syslogd from configuration table * init() is called at initial startup AND each time syslogd is HUPed * Note that if iConfigVerify is set, only the config file is verified but nothing * else happens. -- rgerhards, 2008-07-28 */ static rsRetVal init(void) { DEFiRet; rsRetVal localRet; int iNbrActions; int bHadConfigErr = 0; char cbuf[BUFSIZ]; char bufStartUpMsg[512]; struct sigaction sigAct; thrdTerminateAll(); /* stop all running input threads - TODO: reconsider location! */ /* initialize some static variables */ pDfltHostnameCmp = NULL; pDfltProgNameCmp = NULL; eDfltHostnameCmpMode = HN_NO_COMP; dbgprintf("rsyslog %s - called init()\n", VERSION); /* delete the message queue, which also flushes all messages left over */ if(pMsgQueue != NULL) { dbgprintf("deleting main message queue\n"); qqueueDestruct(&pMsgQueue); /* delete pThis here! */ pMsgQueue = NULL; } /* Close all open log files and free log descriptor array. This also frees * all output-modules instance data. */ freeSelectors(); /* Unload all non-static modules */ dbgprintf("Unloading non-static modules.\n"); module.UnloadAndDestructAll(eMOD_LINK_DYNAMIC_LOADED); dbgprintf("Clearing templates.\n"); tplDeleteNew(); /* re-setting values to defaults (where applicable) */ /* once we have loadable modules, we must re-visit this code. The reason is * that config variables are not re-set, because the module is not yet loaded. On * the other hand, that doesn't matter, because the module got unloaded and is then * re-loaded, so the variables should be re-set via that way. And this is exactly how * it works. Loadable module's variables are initialized on load, the rest here. * rgerhards, 2008-04-28 */ conf.cfsysline((uchar*)"ResetConfigVariables"); conf.ReInitConf(); /* open the configuration file */ localRet = conf.processConfFile(ConfFile); CHKiRet(conf.GetNbrActActions(&iNbrActions)); if(localRet != RS_RET_OK) { errmsg.LogError(0, localRet, "CONFIG ERROR: could not interpret master config file '%s'.", ConfFile); bHadConfigErr = 1; } else if(iNbrActions == 0) { errmsg.LogError(0, RS_RET_NO_ACTIONS, "CONFIG ERROR: there are no active actions configured. Inputs will " "run, but no output whatsoever is created."); bHadConfigErr = 1; } if((localRet != RS_RET_OK && localRet != RS_RET_NONFATAL_CONFIG_ERR) || iNbrActions == 0) { /* rgerhards: this code is executed to set defaults when the * config file could not be opened. We might think about * abandoning the run in this case - but this, too, is not * very clever... So we stick with what we have. * We ignore any errors while doing this - we would be lost anyhow... */ errmsg.LogError(0, NO_ERRCODE, "EMERGENCY CONFIGURATION ACTIVATED - fix rsyslog config file!"); selector_t *f = NULL; /* note: we previously used _POSIY_TTY_NAME_MAX+1, but this turned out to be * too low on linux... :-S -- rgerhards, 2008-07-28 */ char szTTYNameBuf[128]; conf.cfline((uchar*)"*.ERR\t" _PATH_CONSOLE, &f); conf.cfline((uchar*)"syslog.*\t" _PATH_CONSOLE, &f); conf.cfline((uchar*)"*.PANIC\t*", &f); conf.cfline((uchar*)"syslog.*\troot", &f); if(ttyname_r(0, szTTYNameBuf, sizeof(szTTYNameBuf)) == 0) { snprintf(cbuf,sizeof(cbuf), "*.*\t%s", szTTYNameBuf); conf.cfline((uchar*)cbuf, &f); } else { dbgprintf("error %d obtaining controlling terminal, not using that emergency rule\n", errno); } selectorAddList(f); } legacyOptsHook(); /* we are now done with reading the configuration. This is the right time to * free some objects that were just needed for loading it. rgerhards 2005-10-19 */ if(pDfltHostnameCmp != NULL) { rsCStrDestruct(&pDfltHostnameCmp); } if(pDfltProgNameCmp != NULL) { rsCStrDestruct(&pDfltProgNameCmp); } /* some checks */ if(iMainMsgQueueNumWorkers < 1) { errmsg.LogError(0, NO_ERRCODE, "$MainMsgQueueNumWorkers must be at least 1! Set to 1.\n"); iMainMsgQueueNumWorkers = 1; } if(MainMsgQueType == QUEUETYPE_DISK) { errno = 0; /* for logerror! */ if(glbl.GetWorkDir() == NULL) { errmsg.LogError(0, NO_ERRCODE, "No $WorkDirectory specified - can not run main message queue in 'disk' mode. " "Using 'FixedArray' instead.\n"); MainMsgQueType = QUEUETYPE_FIXED_ARRAY; } if(pszMainMsgQFName == NULL) { errmsg.LogError(0, NO_ERRCODE, "No $MainMsgQueueFileName specified - can not run main message queue in " "'disk' mode. Using 'FixedArray' instead.\n"); MainMsgQueType = QUEUETYPE_FIXED_ARRAY; } } /* check if we need to generate a config DAG and, if so, do that */ if(pszConfDAGFile != NULL) generateConfigDAG(pszConfDAGFile); /* we are done checking the config - now validate if we should actually run or not. * If not, terminate. -- rgerhards, 2008-07-25 */ if(iConfigVerify) { if(bHadConfigErr) { /* a bit dirty, but useful... */ exit(1); } ABORT_FINALIZE(RS_RET_VALIDATION_RUN); } /* switch the message object to threaded operation, if necessary */ if(MainMsgQueType == QUEUETYPE_DIRECT || iMainMsgQueueNumWorkers > 1) { MsgEnableThreadSafety(); } /* create message queue */ CHKiRet_Hdlr(qqueueConstruct(&pMsgQueue, MainMsgQueType, iMainMsgQueueNumWorkers, iMainMsgQueueSize, msgConsumer)) { /* no queue is fatal, we need to give up in that case... */ fprintf(stderr, "fatal error %d: could not create message queue - rsyslogd can not run!\n", iRet); exit(1); } /* name our main queue object (it's not fatal if it fails...) */ obj.SetName((obj_t*) pMsgQueue, (uchar*) "main queue"); /* ... set some properties ... */ # define setQPROP(func, directive, data) \ CHKiRet_Hdlr(func(pMsgQueue, data)) { \ errmsg.LogError(0, NO_ERRCODE, "Invalid " #directive ", error %d. Ignored, running with default setting", iRet); \ } # define setQPROPstr(func, directive, data) \ CHKiRet_Hdlr(func(pMsgQueue, data, (data == NULL)? 0 : strlen((char*) data))) { \ errmsg.LogError(0, NO_ERRCODE, "Invalid " #directive ", error %d. Ignored, running with default setting", iRet); \ } setQPROP(qqueueSetMaxFileSize, "$MainMsgQueueFileSize", iMainMsgQueMaxFileSize); setQPROP(qqueueSetsizeOnDiskMax, "$MainMsgQueueMaxDiskSpace", iMainMsgQueMaxDiskSpace); setQPROPstr(qqueueSetFilePrefix, "$MainMsgQueueFileName", pszMainMsgQFName); setQPROP(qqueueSetiPersistUpdCnt, "$MainMsgQueueCheckpointInterval", iMainMsgQPersistUpdCnt); setQPROP(qqueueSettoQShutdown, "$MainMsgQueueTimeoutShutdown", iMainMsgQtoQShutdown ); setQPROP(qqueueSettoActShutdown, "$MainMsgQueueTimeoutActionCompletion", iMainMsgQtoActShutdown); setQPROP(qqueueSettoWrkShutdown, "$MainMsgQueueWorkerTimeoutThreadShutdown", iMainMsgQtoWrkShutdown); setQPROP(qqueueSettoEnq, "$MainMsgQueueTimeoutEnqueue", iMainMsgQtoEnq); setQPROP(qqueueSetiHighWtrMrk, "$MainMsgQueueHighWaterMark", iMainMsgQHighWtrMark); setQPROP(qqueueSetiLowWtrMrk, "$MainMsgQueueLowWaterMark", iMainMsgQLowWtrMark); setQPROP(qqueueSetiDiscardMrk, "$MainMsgQueueDiscardMark", iMainMsgQDiscardMark); setQPROP(qqueueSetiDiscardSeverity, "$MainMsgQueueDiscardSeverity", iMainMsgQDiscardSeverity); setQPROP(qqueueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", iMainMsgQWrkMinMsgs); setQPROP(qqueueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", bMainMsgQSaveOnShutdown); setQPROP(qqueueSetiDeqSlowdown, "$MainMsgQueueDequeueSlowdown", iMainMsgQDeqSlowdown); setQPROP(qqueueSetiDeqtWinFromHr, "$MainMsgQueueDequeueTimeBegin", iMainMsgQueueDeqtWinFromHr); setQPROP(qqueueSetiDeqtWinToHr, "$MainMsgQueueDequeueTimeEnd", iMainMsgQueueDeqtWinToHr); # undef setQPROP # undef setQPROPstr /* ... and finally start the queue! */ CHKiRet_Hdlr(qqueueStart(pMsgQueue)) { /* no queue is fatal, we need to give up in that case... */ fprintf(stderr, "fatal error %d: could not start message queue - rsyslogd can not run!\n", iRet); exit(1); } bHaveMainQueue = (MainMsgQueType == QUEUETYPE_DIRECT) ? 0 : 1; dbgprintf("Main processing queue is initialized and running\n"); /* the output part and the queue is now ready to run. So it is a good time * to start the inputs. Please note that the net code above should be * shuffled to down here once we have everything in input modules. * rgerhards, 2007-12-14 */ startInputModules(); if(Debug) { dbgPrintInitInfo(); } /* we now generate the startup message. It now includes everything to * identify this instance. -- rgerhards, 2005-08-17 */ snprintf(bufStartUpMsg, sizeof(bufStartUpMsg)/sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"] restart", (int) myPid); logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*)bufStartUpMsg, 0); memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = sighup_handler; sigaction(SIGHUP, &sigAct, NULL); dbgprintf(" (re)started.\n"); finalize_it: RETiRet; } /* add a completely-processed selector (after config line parsing) to * the linked list of selectors. We now need to check * if it has any actions associated and, if so, link it to the linked * list. If it has nothing associated with it, we can simply discard * it. * We have one special case during initialization: then, the current * selector is NULL, which means we do not need to care about it at * all. -- rgerhards, 2007-08-01 */ rsRetVal selectorAddList(selector_t *f) { DEFiRet; int iActionCnt; static selector_t *nextp = NULL; /* TODO: make this go away (see comment below) */ if(f != NULL) { CHKiRet(llGetNumElts(&f->llActList, &iActionCnt)); if(iActionCnt == 0) { errmsg.LogError(0, NO_ERRCODE, "warning: selector line without actions will be discarded"); selectorDestruct(f); } else { /* successfully created an entry */ dbgprintf("selector line successfully processed\n"); /* TODO: we should use the linked list class for the selector list, else we need to add globals * ... well nextp could be added temporarily... * Thanks to varmojfekoj for having the idea to just use "Files" to make this * code work. I had actually forgotten to fix the code here before moving to 1.18.0. * And, of course, I also did not migrate the selector_t structure to the linked list class. * However, that should still be one of the very next things to happen. * rgerhards, 2007-08-06 */ if(Files == NULL) { Files = f; } else { nextp->f_next = f; } nextp = f; } } finalize_it: RETiRet; } /* set the main message queue mode * rgerhards, 2008-01-03 */ static rsRetVal setMainMsgQueType(void __attribute__((unused)) *pVal, uchar *pszType) { DEFiRet; if (!strcasecmp((char *) pszType, "fixedarray")) { MainMsgQueType = QUEUETYPE_FIXED_ARRAY; dbgprintf("main message queue type set to FIXED_ARRAY\n"); } else if (!strcasecmp((char *) pszType, "linkedlist")) { MainMsgQueType = QUEUETYPE_LINKEDLIST; dbgprintf("main message queue type set to LINKEDLIST\n"); } else if (!strcasecmp((char *) pszType, "disk")) { MainMsgQueType = QUEUETYPE_DISK; dbgprintf("main message queue type set to DISK\n"); } else if (!strcasecmp((char *) pszType, "direct")) { MainMsgQueType = QUEUETYPE_DIRECT; dbgprintf("main message queue type set to DIRECT (no queueing at all)\n"); } else { errmsg.LogError(0, RS_RET_INVALID_PARAMS, "unknown mainmessagequeuetype parameter: %s", (char *) pszType); iRet = RS_RET_INVALID_PARAMS; } free(pszType); /* no longer needed */ RETiRet; } /* * The following function is resposible for handling a SIGHUP signal. Since * we are now doing mallocs/free as part of init we had better not being * doing this during a signal handler. Instead this function simply sets * a flag variable which will tells the main loop to do "the right thing". */ void sighup_handler() { struct sigaction sigAct; bHadHUP = 1; memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = sighup_handler; sigaction(SIGHUP, &sigAct, NULL); } /* this function pulls all internal messages from the buffer * and puts them into the processing engine. * We can only do limited error handling, as this would not * really help us. TODO: add error messages? * rgerhards, 2007-08-03 */ static void processImInternal(void) { int iPri; int iFlags; msg_t *pMsg; while(iminternalRemoveMsg(&iPri, &pMsg, &iFlags) == RS_RET_OK) { logmsg(pMsg, iFlags); } } /* helper to doHUP(), this "HUPs" each action. The necessary locking * is done inside the action class and nothing we need to take care of. * rgerhards, 2008-10-22 */ DEFFUNC_llExecFunc(doHUPActions) { BEGINfunc actionCallHUPHdlr((action_t*) pData); ENDfunc return RS_RET_OK; /* we ignore errors, we can not do anything either way */ } /* This function processes a HUP after one has been detected. Note that this * is *NOT* the sighup handler. The signal is recorded by the handler, that record * detected inside the mainloop and then this function is called to do the * real work. -- rgerhards, 2008-10-22 */ static inline void doHUP(void) { selector_t *f; char buf[512]; snprintf(buf, sizeof(buf) / sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"] rsyslogd was HUPed, type '%s'.", (int) myPid, glbl.GetHUPisRestart() ? "restart" : "lightweight"); errno = 0; logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*)buf, 0); if(glbl.GetHUPisRestart()) { DBGPRINTF("Received SIGHUP, configured to be restart, reloading rsyslogd.\n"); init(); /* main queue is stopped as part of init() */ } else { DBGPRINTF("Received SIGHUP, configured to be a non-restart type of HUP - notifying actions.\n"); for(f = Files; f != NULL ; f = f->f_next) { llExecFunc(&f->llActList, doHUPActions, NULL); } } } /* This is the main processing loop. It is called after successful initialization. * When it returns, the syslogd terminates. * Its sole function is to provide some housekeeping things. The real work is done * by the other threads spawned. */ static void mainloop(void) { struct timeval tvSelectTimeout; BEGINfunc /* first check if we have any internal messages queued and spit them out. We used * to do that on any loop iteration, but that is no longer necessry. The reason * is that once we reach this point here, we always run on multiple threads and * thus the main queue is properly initialized. -- rgerhards, 2008-06-09 */ processImInternal(); while(!bFinished){ /* this is now just a wait - please note that we do use a near-"eternal" * timeout of 1 day if we do not have repeated message reduction turned on * (which it is not by default). This enables us to help safe the environment * by not unnecessarily awaking rsyslog on a regular tick (just think * powertop, for example). In that case, we primarily wait for a signal, * but a once-a-day wakeup should be quite acceptable. -- rgerhards, 2008-06-09 */ tvSelectTimeout.tv_sec = (bReduceRepeatMsgs == 1) ? TIMERINTVL : 86400 /*1 day*/; tvSelectTimeout.tv_usec = 0; select(1, NULL, NULL, NULL, &tvSelectTimeout); if(bFinished) break; /* exit as quickly as possible - see long comment below */ /* If we received a HUP signal, we call doFlushRptdMsgs() a bit early. This * doesn't matter, because doFlushRptdMsgs() checks timestamps. What may happen, * however, is that the too-early call may lead to a bit too-late output * of "last message repeated n times" messages. But that is quite acceptable. * rgerhards, 2007-12-21 * ... and just to explain, we flush here because that is exactly what the mainloop * shall do - provide a periodic interval in which not-yet-flushed messages will * be flushed. Be careful, there is a potential race condition: doFlushRptdMsgs() * needs to aquire a lock on the action objects. If, however, long-running consumers * cause the main queue worker threads to lock them for a long time, we may receive * a starvation condition, resulting in the mainloop being held on lock for an extended * period of time. That, in turn, could lead to unresponsiveness to termination * requests. It is especially important that the bFinished flag is checked before * doFlushRptdMsgs() is called (I know because I ran into that situation). I am * not yet sure if the remaining probability window of a termination-related * problem is large enough to justify changing the code - I would consider it * extremely unlikely that the problem ever occurs in practice. Fixing it would * require not only a lot of effort but would cost considerable performance. So * for the time being, I think the remaining risk can be accepted. * rgerhards, 2008-01-10 */ if(bReduceRepeatMsgs == 1) doFlushRptdMsgs(); if(bHadHUP) { doHUP(); bHadHUP = 0; continue; } } ENDfunc } /* If user is not root, prints warnings or even exits * TODO: check all dynafiles for write permission * ... but it is probably better to wait here until we have * a module interface - rgerhards, 2007-07-23 */ static void checkPermissions() { #if 0 /* TODO: this function must either be redone or removed - now with the input modules, * there is no such simple check we can do. What we can check, however, is if there is * any input module active and terminate, if not. -- rgerhards, 2007-12-26 */ /* we are not root */ if (geteuid() != 0) { fputs("WARNING: Local messages will not be logged! If you want to log them, run rsyslog as root.\n",stderr); #ifdef SYSLOG_INET /* udp enabled and port number less than or equal to 1024 */ if ( AcceptRemote && (atoi(LogPort) <= 1024) ) fprintf(stderr, "WARNING: Will not listen on UDP port %s. Use port number higher than 1024 or run rsyslog as root!\n", LogPort); /* tcp enabled and port number less or equal to 1024 */ if( bEnableTCP && (atoi(TCPLstnPort) <= 1024) ) fprintf(stderr, "WARNING: Will not listen on TCP port %s. Use port number higher than 1024 or run rsyslog as root!\n", TCPLstnPort); /* Neither explicit high UDP port nor explicit high TCP port. * It is useless to run anymore */ if( !(AcceptRemote && (atoi(LogPort) > 1024)) && !( bEnableTCP && (atoi(TCPLstnPort) > 1024)) ) { #endif fprintf(stderr, "ERROR: Nothing to log, no reason to run. Please run rsyslog as root.\n"); exit(EXIT_FAILURE); #ifdef SYSLOG_INET } #endif } #endif } /* load build-in modules * very first version begun on 2007-07-23 by rgerhards */ static rsRetVal loadBuildInModules(void) { DEFiRet; if((iRet = module.doModInit(modInitFile, (uchar*) "builtin-file", NULL)) != RS_RET_OK) { RETiRet; } #ifdef SYSLOG_INET if((iRet = module.doModInit(modInitFwd, (uchar*) "builtin-fwd", NULL)) != RS_RET_OK) { RETiRet; } #endif if((iRet = module.doModInit(modInitShell, (uchar*) "builtin-shell", NULL)) != RS_RET_OK) { RETiRet; } if((iRet = module.doModInit(modInitDiscard, (uchar*) "builtin-discard", NULL)) != RS_RET_OK) { RETiRet; } /* dirty, but this must be for the time being: the usrmsg module must always be * loaded as last module. This is because it processes any time of action selector. * If we load it before other modules, these others will never have a chance of * working with the config file. We may change that implementation so that a user name * must start with an alnum, that would definitely help (but would it break backwards * compatibility?). * rgerhards, 2007-07-23 * User names now must begin with: * [a-zA-Z0-9_.] */ if((iRet = module.doModInit(modInitUsrMsg, (uchar*) "builtin-usrmsg", NULL)) != RS_RET_OK) RETiRet; /* ok, initialization of the command handler probably does not 100% belong right in * this space here. However, with the current design, this is actually quite a good * place to put it. We might decide to shuffle it around later, but for the time * being, the code has found its home here. A not-just-sideeffect of this decision * is that rsyslog will terminate if we can not register our built-in config commands. * This, I think, is the right thing to do. -- rgerhards, 2007-07-31 */ CHKiRet(regCfSysLineHdlr((uchar *)"actionresumeretrycount", 0, eCmdHdlrInt, NULL, &glbliActionResumeRetryCount, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuefilename", 0, eCmdHdlrGetWord, NULL, &pszMainMsgQFName, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesize", 0, eCmdHdlrInt, NULL, &iMainMsgQueueSize, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuehighwatermark", 0, eCmdHdlrInt, NULL, &iMainMsgQHighWtrMark, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuelowwatermark", 0, eCmdHdlrInt, NULL, &iMainMsgQLowWtrMark, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuediscardmark", 0, eCmdHdlrInt, NULL, &iMainMsgQDiscardMark, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuediscardseverity", 0, eCmdHdlrSeverity, NULL, &iMainMsgQDiscardSeverity, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuecheckpointinterval", 0, eCmdHdlrInt, NULL, &iMainMsgQPersistUpdCnt, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetype", 0, eCmdHdlrGetWord, setMainMsgQueType, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueueworkerthreads", 0, eCmdHdlrInt, NULL, &iMainMsgQueueNumWorkers, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetimeoutshutdown", 0, eCmdHdlrInt, NULL, &iMainMsgQtoQShutdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetimeoutactioncompletion", 0, eCmdHdlrInt, NULL, &iMainMsgQtoActShutdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetimeoutenqueue", 0, eCmdHdlrInt, NULL, &iMainMsgQtoEnq, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueueworkertimeoutthreadshutdown", 0, eCmdHdlrInt, NULL, &iMainMsgQtoWrkShutdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeueslowdown", 0, eCmdHdlrInt, NULL, &iMainMsgQDeqSlowdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueueworkerthreadminimummessages", 0, eCmdHdlrInt, NULL, &iMainMsgQWrkMinMsgs, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuemaxfilesize", 0, eCmdHdlrSize, NULL, &iMainMsgQueMaxFileSize, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuemaxdiskspace", 0, eCmdHdlrSize, NULL, &iMainMsgQueMaxDiskSpace, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesaveonshutdown", 0, eCmdHdlrBinary, NULL, &bMainMsgQSaveOnShutdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuetimebegin", 0, eCmdHdlrInt, NULL, &iMainMsgQueueDeqtWinFromHr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuetimeend", 0, eCmdHdlrInt, NULL, &iMainMsgQueueDeqtWinToHr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"repeatedmsgreduction", 0, eCmdHdlrBinary, NULL, &bReduceRepeatMsgs, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionexeconlywhenpreviousissuspended", 0, eCmdHdlrBinary, NULL, &bActExecWhenPrevSusp, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionexeconlyonceeveryinterval", 0, eCmdHdlrInt, NULL, &iActExecOnceInterval, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionresumeinterval", 0, eCmdHdlrInt, setActionResumeInterval, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"controlcharacterescapeprefix", 0, eCmdHdlrGetChar, NULL, &cCCEscapeChar, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"escapecontrolcharactersonreceive", 0, eCmdHdlrBinary, NULL, &bEscapeCCOnRcv, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"droptrailinglfonreception", 0, eCmdHdlrBinary, NULL, &bDropTrailingLF, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"template", 0, eCmdHdlrCustomHandler, conf.doNameLine, (void*)DIR_TEMPLATE, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"outchannel", 0, eCmdHdlrCustomHandler, conf.doNameLine, (void*)DIR_OUTCHANNEL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"allowedsender", 0, eCmdHdlrCustomHandler, conf.doNameLine, (void*)DIR_ALLOWEDSENDER, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"modload", 0, eCmdHdlrCustomHandler, conf.doModLoad, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"includeconfig", 0, eCmdHdlrCustomHandler, conf.doIncludeLine, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"umask", 0, eCmdHdlrFileCreateMode, setUmask, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"maxopenfiles", 0, eCmdHdlrInt, setMaxFiles, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"debugprinttemplatelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintTemplateList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"debugprintmodulelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintModuleList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"debugprintcfsyslinehandlerlist", 0, eCmdHdlrBinary, NULL, &bDebugPrintCfSysLineHandlerList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"moddir", 0, eCmdHdlrGetWord, NULL, &pModDir, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"generateconfiggraph", 0, eCmdHdlrGetWord, NULL, &pszConfDAGFile, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"errormessagestostderr", 0, eCmdHdlrBinary, NULL, &bErrMsgToStderr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"maxmessagesize", 0, eCmdHdlrSize, setMaxMsgSize, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"privdroptouser", 0, eCmdHdlrUID, NULL, &uidDropPriv, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"privdroptouserid", 0, eCmdHdlrInt, NULL, &uidDropPriv, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"privdroptogroup", 0, eCmdHdlrGID, NULL, &gidDropPriv, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"privdroptogroupid", 0, eCmdHdlrGID, NULL, &gidDropPriv, NULL)); /* now add other modules handlers (we should work on that to be able to do it in ClassInit(), but so far * that is not possible). -- rgerhards, 2008-01-28 */ CHKiRet(actionAddCfSysLineHdrl()); finalize_it: RETiRet; } /* print version and compile-time setting information. */ static void printVersion(void) { printf("rsyslogd %s, ", VERSION); printf("compiled with:\n"); #ifdef FEATURE_REGEXP printf("\tFEATURE_REGEXP:\t\t\t\tYes\n"); #else printf("\tFEATURE_REGEXP:\t\t\t\tNo\n"); #endif #ifndef NOLARGEFILE printf("\tFEATURE_LARGEFILE:\t\t\tYes\n"); #else printf("\tFEATURE_LARGEFILE:\t\t\tNo\n"); #endif #ifdef USE_NETZIP printf("\tFEATURE_NETZIP (message compression):\tYes\n"); #else printf("\tFEATURE_NETZIP (message compression):\tNo\n"); #endif #if defined(SYSLOG_INET) && defined(USE_GSSAPI) printf("\tGSSAPI Kerberos 5 support:\t\tYes\n"); #else printf("\tGSSAPI Kerberos 5 support:\t\tNo\n"); #endif #ifndef NDEBUG printf("\tFEATURE_DEBUG (debug build, slow code):\tYes\n"); #else printf("\tFEATURE_DEBUG (debug build, slow code):\tNo\n"); #endif #ifdef HAVE_ATOMIC_BUILTINS printf("\tAtomic operations supported:\t\tYes\n"); #else printf("\tAtomic operations supported:\t\tNo\n"); #endif #ifdef RTINST printf("\tRuntime Instrumentation (slow code):\tYes\n"); #else printf("\tRuntime Instrumentation (slow code):\tNo\n"); #endif printf("\nSee http://www.rsyslog.com for more information.\n"); } /* This function is called after initial initalization. It is used to * move code out of the too-long main() function. * rgerhards, 2007-10-17 */ static rsRetVal mainThread() { DEFiRet; uchar *pTmp; /* Note: signals MUST be processed by the thread this code is running in. The reason * is that we need to interrupt the select() system call. -- rgerhards, 2007-10-17 */ /* initialize the build-in templates */ pTmp = template_DebugFormat; tplAddLine("RSYSLOG_DebugFormat", &pTmp); pTmp = template_SyslogProtocol23Format; tplAddLine("RSYSLOG_SyslogProtocol23Format", &pTmp); pTmp = template_FileFormat; /* new format for files with high-precision stamp */ tplAddLine("RSYSLOG_FileFormat", &pTmp); pTmp = template_TraditionalFileFormat; tplAddLine("RSYSLOG_TraditionalFileFormat", &pTmp); pTmp = template_WallFmt; tplAddLine(" WallFmt", &pTmp); pTmp = template_ForwardFormat; tplAddLine("RSYSLOG_ForwardFormat", &pTmp); pTmp = template_TraditionalForwardFormat; tplAddLine("RSYSLOG_TraditionalForwardFormat", &pTmp); pTmp = template_StdUsrMsgFmt; tplAddLine(" StdUsrMsgFmt", &pTmp); pTmp = template_StdDBFmt; tplAddLine(" StdDBFmt", &pTmp); pTmp = template_StdPgSQLFmt; tplLastStaticInit(tplAddLine(" StdPgSQLFmt", &pTmp)); CHKiRet(init()); if(Debug && debugging_on) { dbgprintf("Debugging enabled, SIGUSR1 to turn off debugging.\n"); } /* Send a signal to the parent so it can terminate. */ if(myPid != ppid) kill(ppid, SIGTERM); /* If instructed to do so, we now drop privileges. Note that this is not 100% secure, * because inputs and outputs are already running at this time. However, we can implement * dropping of privileges rather quickly and it will work in many cases. While it is not * the ultimate solution, the current one is still much better than not being able to * drop privileges at all. Doing it correctly, requires a change in architecture, which * we should do over time. TODO -- rgerhards, 2008-11-19 */ if(gidDropPriv != 0) { doDropPrivGid(gidDropPriv); glbl.SetHUPisRestart(0); /* we can not do restart-type HUPs with dropped privs */ } if(uidDropPriv != 0) { doDropPrivUid(uidDropPriv); glbl.SetHUPisRestart(0); /* we can not do restart-type HUPs with dropped privs */ } /* END OF INTIALIZATION * ... but keep in mind that we might do a restart and thus init() might * be called again. If that happens, we must shut down the worker thread, * do the init() and then restart things. * rgerhards, 2005-10-24 */ dbgprintf("initialization completed, transitioning to regular run mode\n"); mainloop(); finalize_it: RETiRet; } /* Method to initialize all global classes and use the objects that we need. * rgerhards, 2008-01-04 * rgerhards, 2008-04-16: the actual initialization is now carried out by the runtime */ static rsRetVal InitGlobalClasses(void) { DEFiRet; char *pErrObj; /* tells us which object failed if that happens (useful for troubleshooting!) */ /* Intialize the runtime system */ pErrObj = "rsyslog runtime"; /* set in case the runtime errors before setting an object */ CHKiRet(rsrtInit(&pErrObj, &obj)); CHKiRet(rsrtSetErrLogger(submitErrMsg)); /* set out error handler */ /* Now tell the system which classes we need ourselfs */ pErrObj = "glbl"; CHKiRet(objUse(glbl, CORE_COMPONENT)); pErrObj = "errmsg"; CHKiRet(objUse(errmsg, CORE_COMPONENT)); pErrObj = "module"; CHKiRet(objUse(module, CORE_COMPONENT)); pErrObj = "var"; CHKiRet(objUse(var, CORE_COMPONENT)); pErrObj = "datetime"; CHKiRet(objUse(datetime, CORE_COMPONENT)); pErrObj = "vm"; CHKiRet(objUse(vm, CORE_COMPONENT)); pErrObj = "expr"; CHKiRet(objUse(expr, CORE_COMPONENT)); pErrObj = "conf"; CHKiRet(objUse(conf, CORE_COMPONENT)); /* intialize some dummy classes that are not part of the runtime */ pErrObj = "action"; CHKiRet(actionClassInit()); pErrObj = "template"; CHKiRet(templateInit()); pErrObj = "parser"; CHKiRet(parserClassInit()); /* TODO: the dependency on net shall go away! -- rgerhards, 2008-03-07 */ pErrObj = "net"; CHKiRet(objUse(net, LM_NET_FILENAME)); finalize_it: if(iRet != RS_RET_OK) { /* we know we are inside the init sequence, so we can safely emit * messages to stderr. -- rgerhards, 2008-04-02 */ fprintf(stderr, "Error during class init for object '%s' - failing...\n", pErrObj); } RETiRet; } /* Method to exit all global classes. We do not do any error checking here, * because that wouldn't help us at all. So better try to deinit blindly * as much as succeeds (which usually means everything will). We just must * be careful to do the de-init in the opposite order of the init, because * of the dependencies. However, its not as important this time, because * we have reference counting. * rgerhards, 2008-03-10 */ static rsRetVal GlobalClassExit(void) { DEFiRet; /* first, release everything we used ourself */ objRelease(net, LM_NET_FILENAME);/* TODO: the dependency on net shall go away! -- rgerhards, 2008-03-07 */ objRelease(conf, CORE_COMPONENT); objRelease(expr, CORE_COMPONENT); vmClassExit(); /* this is hack, currently core_modules do not get this automatically called */ objRelease(vm, CORE_COMPONENT); objRelease(var, CORE_COMPONENT); objRelease(datetime, CORE_COMPONENT); /* TODO: implement the rest of the deinit */ #if 0 CHKiRet(datetimeClassInit(NULL)); CHKiRet(msgClassInit(NULL)); CHKiRet(strmClassInit(NULL)); CHKiRet(wtiClassInit(NULL)); CHKiRet(wtpClassInit(NULL)); CHKiRet(qqueueClassInit(NULL)); CHKiRet(vmstkClassInit(NULL)); CHKiRet(sysvarClassInit(NULL)); CHKiRet(vmClassInit(NULL)); CHKiRet(vmopClassInit(NULL)); CHKiRet(vmprgClassInit(NULL)); CHKiRet(ctok_tokenClassInit(NULL)); CHKiRet(ctokClassInit(NULL)); CHKiRet(exprClassInit(NULL)); /* dummy "classes" */ CHKiRet(actionClassInit()); CHKiRet(templateInit()); #endif /* dummy "classes */ strExit(); #if 0 CHKiRet(objGetObjInterface(&obj)); /* this provides the root pointer for all other queries */ /* the following classes were intialized by objClassInit() */ CHKiRet(objUse(errmsg, CORE_COMPONENT)); CHKiRet(objUse(module, CORE_COMPONENT)); #endif rsrtExit(); /* *THIS* *MUST/SHOULD?* always be the first class initilizer being called (except debug)! */ RETiRet; } /* some support for command line option parsing. Any non-trivial options must be * buffered until the complete command line has been parsed. This is necessary to * prevent dependencies between the options. That, in turn, means we need to have * something that is capable of buffering options and there values. The follwing * functions handle that. * rgerhards, 2008-04-04 */ typedef struct bufOpt { struct bufOpt *pNext; char optchar; char *arg; } bufOpt_t; static bufOpt_t *bufOptRoot = NULL; static bufOpt_t *bufOptLast = NULL; /* add option buffer */ static rsRetVal bufOptAdd(char opt, char *arg) { DEFiRet; bufOpt_t *pBuf; if((pBuf = malloc(sizeof(bufOpt_t))) == NULL) ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); pBuf->optchar = opt; pBuf->arg = arg; pBuf->pNext = NULL; if(bufOptLast == NULL) { bufOptRoot = pBuf; /* then there is also no root! */ } else { bufOptLast->pNext = pBuf; } bufOptLast = pBuf; finalize_it: RETiRet; } /* remove option buffer from top of list, return values and destruct buffer itself. * returns RS_RET_END_OF_LINKEDLIST when no more options are present. * (we use int *opt instead of char *opt to keep consistent with getopt()) */ static rsRetVal bufOptRemove(int *opt, char **arg) { DEFiRet; bufOpt_t *pBuf; if(bufOptRoot == NULL) ABORT_FINALIZE(RS_RET_END_OF_LINKEDLIST); pBuf = bufOptRoot; *opt = pBuf->optchar; *arg = pBuf->arg; bufOptRoot = pBuf->pNext; free(pBuf); finalize_it: RETiRet; } /* global initialization, to be done only once and before the mainloop is started. * rgerhards, 2008-07-28 (extracted from realMain()) */ static rsRetVal doGlblProcessInit(void) { struct sigaction sigAct; int num_fds; int i; DEFiRet; checkPermissions(); thrdInit(); if( !(Debug || NoFork) ) { dbgprintf("Checking pidfile.\n"); if (!check_pid(PidFile)) { memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = doexit; sigaction(SIGTERM, &sigAct, NULL); if (fork()) { /* Parent process */ sleep(300); /* Not reached unless something major went wrong. 5 * minutes should be a fair amount of time to wait. * Please note that this procedure is important since * the father must not exit before syslogd isn't * initialized or the klogd won't be able to flush its * logs. -Joey */ exit(1); /* "good" exit - after forking, not diasabling anything */ } num_fds = getdtablesize(); for (i= 0; i < num_fds; i++) (void) close(i); untty(); } else { fputs(" Already running.\n", stderr); exit(1); /* "good" exit, done if syslogd is already running */ } } else { debugging_on = 1; } /* tuck my process id away */ dbgprintf("Writing pidfile %s.\n", PidFile); if (!check_pid(PidFile)) { if (!write_pid(PidFile)) { fputs("Can't write pid.\n", stderr); exit(1); /* exit during startup - questionable */ } } else { fputs("Pidfile (and pid) already exist.\n", stderr); exit(1); /* exit during startup - questionable */ } myPid = getpid(); /* save our pid for further testing (also used for messages) */ memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = sigsegvHdlr; sigaction(SIGSEGV, &sigAct, NULL); sigAct.sa_handler = sigsegvHdlr; sigaction(SIGABRT, &sigAct, NULL); sigAct.sa_handler = doDie; sigaction(SIGTERM, &sigAct, NULL); sigAct.sa_handler = Debug ? doDie : SIG_IGN; sigaction(SIGINT, &sigAct, NULL); sigaction(SIGQUIT, &sigAct, NULL); sigAct.sa_handler = reapchild; sigaction(SIGCHLD, &sigAct, NULL); sigAct.sa_handler = Debug ? debug_switch : SIG_IGN; sigaction(SIGUSR1, &sigAct, NULL); sigAct.sa_handler = SIG_IGN; sigaction(SIGPIPE, &sigAct, NULL); sigaction(SIGXFSZ, &sigAct, NULL); /* do not abort if 2gig file limit is hit */ RETiRet; } /* This is the main entry point into rsyslogd. Over time, we should try to * modularize it a bit more... */ int realMain(int argc, char **argv) { DEFiRet; register uchar *p; int ch; struct hostent *hent; extern int optind; extern char *optarg; int bEOptionWasGiven = 0; int bImUxSockLoaded = 0; /* already generated a $ModLoad imuxsock? */ int iHelperUOpt; int bChDirRoot = 1; /* change the current working directory to "/"? */ char *arg; /* for command line option processing */ uchar legacyConfLine[80]; uchar *LocalHostName; uchar *LocalDomain; uchar *LocalFQDNName; /* first, parse the command line options. We do not carry out any actual work, just * see what we should do. This relieves us from certain anomalies and we can process * the parameters down below in the correct order. For example, we must know the * value of -M before we can do the init, but at the same time we need to have * the base classes init before we can process most of the options. Now, with the * split of functionality, this is no longer a problem. Thanks to varmofekoj for * suggesting this algo. * Note: where we just need to set some flags and can do so without knowledge * of other options, we do this during the inital option processing. With later * versions (if a dependency on -c option is introduced), we must move that code * to other places, but I think it is quite appropriate and saves code to do this * only when actually neeeded. * rgerhards, 2008-04-04 */ while((ch = getopt(argc, argv, "46a:Ac:def:g:hi:l:m:M:nN:op:qQr::s:t:T:u:vwx")) != EOF) { switch((char)ch) { case '4': case '6': case 'A': case 'a': case 'f': /* configuration file */ case 'h': case 'i': /* pid file name */ case 'l': case 'm': /* mark interval */ case 'n': /* don't fork */ case 'N': /* enable config verify mode */ case 'o': case 'p': case 'q': /* add hostname if DNS resolving has failed */ case 'Q': /* dont resolve hostnames in ACL to IPs */ case 's': case 'T': /* chroot on startup (primarily for testing) */ case 'u': /* misc user settings */ case 'w': /* disable disallowed host warnings */ case 'x': /* disable dns for remote messages */ CHKiRet(bufOptAdd(ch, optarg)); break; case 'c': /* compatibility mode */ iCompatibilityMode = atoi(optarg); break; case 'd': /* debug - must be handled now, so that debug is active during init! */ Debug = 1; break; case 'e': /* log every message (no repeat message supression) */ fprintf(stderr, "note: -e option is no longer supported, every message is now logged by default\n"); bEOptionWasGiven = 1; break; case 'g': /* enable tcp gssapi logging */ #if defined(SYSLOG_INET) && defined(USE_GSSAPI) CHKiRet(bufOptAdd('g', optarg)); #else fprintf(stderr, "rsyslogd: -g not valid - not compiled with gssapi support"); #endif break; case 'M': /* default module load path -- this MUST be carried out immediately! */ glblModPath = (uchar*) optarg; break; case 'r': /* accept remote messages */ #ifdef SYSLOG_INET CHKiRet(bufOptAdd(ch, optarg)); #else fprintf(stderr, "rsyslogd: -r not valid - not compiled with network support\n"); #endif break; case 't': /* enable tcp logging */ #ifdef SYSLOG_INET CHKiRet(bufOptAdd(ch, optarg)); #else fprintf(stderr, "rsyslogd: -t not valid - not compiled with network support\n"); #endif break; case 'v': /* MUST be carried out immediately! */ printVersion(); exit(0); /* exit for -v option - so this is a "good one" */ case '?': default: usage(); } } if ((argc -= optind)) usage(); dbgprintf("rsyslogd %s startup, compatibility mode %d, module path '%s'\n", VERSION, iCompatibilityMode, glblModPath == NULL ? "" : (char*)glblModPath); /* we are done with the initial option parsing and processing. Now we init the system. */ ppid = getpid(); CHKiRet_Hdlr(InitGlobalClasses()) { fprintf(stderr, "rsyslogd initializiation failed - global classes could not be initialized.\n" "Did you do a \"make install\"?\n" "Suggested action: run rsyslogd with -d -n options to see what exactly " "fails.\n"); FINALIZE; } /* doing some core initializations */ /* get our host and domain names - we need to do this early as we may emit * error log messages, which need the correct hostname. -- rgerhards, 2008-04-04 */ net.getLocalHostname(&LocalFQDNName); CHKmalloc(LocalHostName = (uchar*) strdup((char*)LocalFQDNName)); glbl.SetLocalFQDNName(LocalFQDNName); /* set the FQDN before we modify it */ if((p = (uchar*)strchr((char*)LocalHostName, '.'))) { *p++ = '\0'; LocalDomain = p; } else { LocalDomain = (uchar*)""; /* It's not clearly defined whether gethostname() * should return the simple hostname or the fqdn. A * good piece of software should be aware of both and * we want to distribute good software. Joey * * Good software also always checks its return values... * If syslogd starts up before DNS is up & /etc/hosts * doesn't have LocalHostName listed, gethostbyname will * return NULL. */ /* TODO: gethostbyname() is not thread-safe, but replacing it is * not urgent as we do not run on multiple threads here. rgerhards, 2007-09-25 */ hent = gethostbyname((char*)LocalHostName); if(hent) { free(LocalHostName); CHKmalloc(LocalHostName = (uchar*)strdup(hent->h_name)); if((p = (uchar*)strchr((char*)LocalHostName, '.'))) { *p++ = '\0'; LocalDomain = p; } } } /* Convert to lower case to recognize the correct domain laterly */ for(p = LocalDomain ; *p ; p++) *p = (char)tolower((int)*p); /* we now have our hostname and can set it inside the global vars. * TODO: think if all of this would better be a runtime function * rgerhards, 2008-04-17 */ glbl.SetLocalHostName(LocalHostName); glbl.SetLocalDomain(LocalDomain); /* initialize the objects */ if((iRet = modInitIminternal()) != RS_RET_OK) { fprintf(stderr, "fatal error: could not initialize errbuf object (error code %d).\n", iRet); exit(1); /* "good" exit, leaving at init for fatal error */ } if((iRet = loadBuildInModules()) != RS_RET_OK) { fprintf(stderr, "fatal error: could not activate built-in modules. Error code %d.\n", iRet); exit(1); /* "good" exit, leaving at init for fatal error */ } /* END core initializations - we now come back to carrying out command line options*/ while((iRet = bufOptRemove(&ch, &arg)) == RS_RET_OK) { dbgprintf("deque option %c, optarg '%s'\n", ch, (arg == NULL) ? "" : arg); switch((char)ch) { case '4': glbl.SetDefPFFamily(PF_INET); break; case '6': glbl.SetDefPFFamily(PF_INET6); break; case 'A': send_to_all++; break; case 'a': if(iCompatibilityMode < 3) { if(!bImUxSockLoaded) { legacyOptsEnq((uchar *) "ModLoad imuxsock"); bImUxSockLoaded = 1; } snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "addunixlistensocket %s", arg); legacyOptsEnq(legacyConfLine); } else { fprintf(stderr, "error -a is no longer supported, use module imuxsock instead"); } break; case 'f': /* configuration file */ ConfFile = (uchar*) arg; break; case 'g': /* enable tcp gssapi logging */ if(iCompatibilityMode < 3) { legacyOptsParseTCP(ch, arg); } else fprintf(stderr, "-g option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 'h': if(iCompatibilityMode < 3) { errmsg.LogError(0, NO_ERRCODE, "WARNING: -h option is no longer supported - ignored"); } else { usage(); /* for v3 and above, it simply is an error */ } break; case 'i': /* pid file name */ PidFile = arg; break; case 'l': if(glbl.GetLocalHosts() != NULL) { fprintf (stderr, "rsyslogd: Only one -l argument allowed, the first one is taken.\n"); } else { glbl.SetLocalHosts(crunch_list(arg)); } break; case 'm': /* mark interval */ if(iCompatibilityMode < 3) { MarkInterval = atoi(arg) * 60; } else fprintf(stderr, "-m option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 'n': /* don't fork */ NoFork = 1; break; case 'N': /* enable config verify mode */ iConfigVerify = atoi(arg); break; case 'o': if(iCompatibilityMode < 3) { if(!bImUxSockLoaded) { legacyOptsEnq((uchar *) "ModLoad imuxsock"); bImUxSockLoaded = 1; } legacyOptsEnq((uchar *) "OmitLocalLogging"); } else { fprintf(stderr, "error -o is no longer supported, use module imuxsock instead"); } break; case 'p': if(iCompatibilityMode < 3) { if(!bImUxSockLoaded) { legacyOptsEnq((uchar *) "ModLoad imuxsock"); bImUxSockLoaded = 1; } snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "SystemLogSocketName %s", arg); legacyOptsEnq(legacyConfLine); } else { fprintf(stderr, "error -p is no longer supported, use module imuxsock instead"); } case 'q': /* add hostname if DNS resolving has failed */ *net.pACLAddHostnameOnFail = 1; break; case 'Q': /* dont resolve hostnames in ACL to IPs */ *net.pACLDontResolve = 1; break; case 'r': /* accept remote messages */ if(iCompatibilityMode < 3) { legacyOptsEnq((uchar *) "ModLoad imudp"); snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "UDPServerRun %s", arg); legacyOptsEnq(legacyConfLine); } else fprintf(stderr, "-r option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 's': if(glbl.GetStripDomains() != NULL) { fprintf (stderr, "rsyslogd: Only one -s argument allowed, the first one is taken.\n"); } else { glbl.SetStripDomains(crunch_list(arg)); } break; case 't': /* enable tcp logging */ if(iCompatibilityMode < 3) { legacyOptsParseTCP(ch, arg); } else fprintf(stderr, "-t option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 'T':/* chroot() immediately at program startup, but only for testing, NOT security yet */ if(chroot(arg) != 0) { perror("chroot"); exit(1); } break; case 'u': /* misc user settings */ iHelperUOpt = atoi(arg); if(iHelperUOpt & 0x01) bParseHOSTNAMEandTAG = 0; if(iHelperUOpt & 0x02) bChDirRoot = 0; break; case 'w': /* disable disallowed host warnigs */ glbl.SetOption_DisallowWarning(0); break; case 'x': /* disable dns for remote messages */ glbl.SetDisableDNS(1); break; case '?': default: usage(); } } if(iRet != RS_RET_END_OF_LINKEDLIST) FINALIZE; if(iConfigVerify) { fprintf(stderr, "rsyslogd: version %s, config validation run (level %d), master config %s\n", VERSION, iConfigVerify, ConfFile); } if(bChDirRoot) { if(chdir("/") != 0) fprintf(stderr, "Can not do 'cd /' - still trying to run\n"); } /* process compatibility mode settings */ if(iCompatibilityMode < 4) { errmsg.LogError(0, NO_ERRCODE, "WARNING: rsyslogd is running in compatibility mode. Automatically " "generated config directives may interfer with your rsyslog.conf settings. " "We suggest upgrading your config and adding -c4 as the first " "rsyslogd option."); } if(iCompatibilityMode < 3) { if(MarkInterval > 0) { legacyOptsEnq((uchar *) "ModLoad immark"); snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "MarkMessagePeriod %d", MarkInterval); legacyOptsEnq(legacyConfLine); } if(!bImUxSockLoaded) { legacyOptsEnq((uchar *) "ModLoad imuxsock"); } } if(bEOptionWasGiven && iCompatibilityMode < 3) { errmsg.LogError(0, NO_ERRCODE, "WARNING: \"message repeated n times\" feature MUST be turned on in " "rsyslog.conf - CURRENTLY EVERY MESSAGE WILL BE LOGGED. Visit " "http://www.rsyslog.com/rptdmsgreduction to learn " "more and cast your vote if you want us to keep this feature."); } if(!iConfigVerify) CHKiRet(doGlblProcessInit()); CHKiRet(mainThread()); /* do any de-init's that need to be done AFTER this comment */ die(bFinished); thrdExit(); finalize_it: if(iRet == RS_RET_VALIDATION_RUN) { fprintf(stderr, "rsyslogd: End of config validation run. Bye.\n"); } else if(iRet != RS_RET_OK) { fprintf(stderr, "rsyslogd run failed with error %d (see rsyslog.h " "or try http://www.rsyslog.com/e/%d to learn what that number means)\n", iRet, iRet*-1); } ENDfunc return 0; } /* This is the main entry point into rsyslogd. This must be a function in its own * right in order to intialize the debug system in a portable way (otherwise we would * need to have a statement before variable definitions. * rgerhards, 20080-01-28 */ int main(int argc, char **argv) { dbgClassInit(); return realMain(argc, argv); } /* vim:set ai: */