/** * \brief This is the main file of the rsyslogd daemon. * * Please visit the rsyslog project at * * http://www.rsyslog.com * * to learn more about it and discuss any questions you may have. * * rsyslog had initially been forked from the sysklogd project. * I would like to express my thanks to the developers of the sysklogd * package - without it, I would have had a much harder start... * * Please note that while rsyslog started from the sysklogd code base, * it nowadays has almost nothing left in common with it. Allmost all * parts of the code have been rewritten. * * This Project was intiated and is maintained by * Rainer Gerhards . * * For further information, please see http://www.rsyslog.com * * rsyslog - An Enhanced syslogd Replacement. * Copyright 2003-2009 Rainer Gerhards and Adiscon GmbH. * * This file is part of rsyslog. * * Rsyslog is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * Rsyslog is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with Rsyslog. If not, see . * * A copy of the GPL can be found in the file "COPYING" in this distribution. */ #include "config.h" #include "rsyslog.h" #define DEFUPRI (LOG_USER|LOG_NOTICE) #define TIMERINTVL 30 /* interval for checking flush, mark */ #include #include #include #include #include #include #define GNU_SOURCE #include #include #include #include #ifdef OS_SOLARIS # include # include # include # include # include #else # include # include #endif #include #include #include #include #include #if HAVE_SYS_TIMESPEC_H # include #endif #if HAVE_SYS_STAT_H # include #endif #include #if HAVE_PATHS_H #include #endif #ifdef USE_NETZIP #include #endif #include #include "pidfile.h" #include "srUtils.h" #include "stringbuf.h" #include "syslogd-types.h" #include "template.h" #include "outchannel.h" #include "syslogd.h" #include "msg.h" #include "modules.h" #include "action.h" #include "iminternal.h" #include "cfsysline.h" #include "omshell.h" #include "omusrmsg.h" #include "omfwd.h" #include "omfile.h" #include "ompipe.h" #include "omdiscard.h" #include "pmrfc5424.h" #include "pmrfc3164.h" #include "smfile.h" #include "smtradfile.h" #include "smfwd.h" #include "smtradfwd.h" #include "threads.h" #include "wti.h" #include "queue.h" #include "stream.h" #include "conf.h" #include "errmsg.h" #include "datetime.h" #include "parser.h" #include "batch.h" #include "unicode-helper.h" #include "ruleset.h" #include "rule.h" #include "net.h" #include "vm.h" #include "prop.h" #include "sd-daemon.h" /* definitions for objects we access */ DEFobjCurrIf(obj) DEFobjCurrIf(glbl) DEFobjCurrIf(datetime) /* TODO: make go away! */ DEFobjCurrIf(conf) DEFobjCurrIf(expr) DEFobjCurrIf(module) DEFobjCurrIf(errmsg) DEFobjCurrIf(rule) DEFobjCurrIf(ruleset) DEFobjCurrIf(prop) DEFobjCurrIf(parser) DEFobjCurrIf(net) /* TODO: make go away! */ /* forward definitions */ static rsRetVal GlobalClassExit(void); #ifndef _PATH_LOGCONF #define _PATH_LOGCONF "/etc/rsyslog.conf" #endif #ifndef _PATH_MODDIR # if defined(__FreeBSD__) # define _PATH_MODDIR "/usr/local/lib/rsyslog/" # else # define _PATH_MODDIR "/lib/rsyslog/" # endif #endif #if defined(SYSLOGD_PIDNAME) # undef _PATH_LOGPID # if defined(FSSTND) # ifdef OS_BSD # define _PATH_VARRUN "/var/run/" # endif # if defined(__sun) || defined(__hpux) # define _PATH_VARRUN "/var/run/" # endif # define _PATH_LOGPID _PATH_VARRUN SYSLOGD_PIDNAME # else # define _PATH_LOGPID "/etc/" SYSLOGD_PIDNAME # endif #else # ifndef _PATH_LOGPID # if defined(__sun) || defined(__hpux) # define _PATH_VARRUN "/var/run/" # endif # if defined(FSSTND) # define _PATH_LOGPID _PATH_VARRUN "rsyslogd.pid" # else # define _PATH_LOGPID "/etc/rsyslogd.pid" # endif # endif #endif #ifndef _PATH_TTY # define _PATH_TTY "/dev/tty" #endif static prop_t *pInternalInputName = NULL; /* there is only one global inputName for all internally-generated messages */ static prop_t *pLocalHostIP = NULL; /* there is only one global IP for all internally-generated messages */ static uchar *ConfFile = (uchar*) _PATH_LOGCONF; /* read-only after startup */ static char *PidFile = _PATH_LOGPID; /* read-only after startup */ static pid_t myPid; /* our pid for use in self-generated messages, e.g. on startup */ /* mypid is read-only after the initial fork() */ static int bHadHUP = 0; /* did we have a HUP? */ static int bFinished = 0; /* used by termination signal handler, read-only except there * is either 0 or the number of the signal that requested the * termination. */ static int iConfigVerify = 0; /* is this just a config verify run? */ /* Intervals at which we flush out "message repeated" messages, * in seconds after previous message is logged. After each flush, * we move to the next interval until we reach the largest. * TODO: this shall go into action object! -- rgerhards, 2008-01-29 */ int repeatinterval[2] = { 30, 60 }; /* # of secs before flush */ #define LIST_DELIMITER ':' /* delimiter between two hosts */ static pid_t ppid; /* This is a quick and dirty hack used for spliting main/startup thread */ typedef struct legacyOptsLL_s { uchar *line; struct legacyOptsLL_s *next; } legacyOptsLL_t; legacyOptsLL_t *pLegacyOptsLL = NULL; /* global variables for config file state */ int iCompatibilityMode = 0; /* version we should be compatible with; 0 means sysklogd. It is the default, so if no -c option is given, we make ourselvs as compatible to sysklogd as possible. */ #define DFLT_bLogStatusMsgs 1 static int bLogStatusMsgs = DFLT_bLogStatusMsgs; /* log rsyslog start/stop/HUP messages? */ static int bDebugPrintTemplateList = 1;/* output template list in debug mode? */ static int bDebugPrintCfSysLineHandlerList = 1;/* output cfsyslinehandler list in debug mode? */ static int bDebugPrintModuleList = 1;/* output module list in debug mode? */ static int bErrMsgToStderr = 1; /* print error messages to stderr (in addition to everything else)? */ int bReduceRepeatMsgs; /* reduce repeated message - 0 - no, 1 - yes */ int bAbortOnUncleanConfig = 0; /* abort run (rather than starting with partial config) if there was any issue in conf */ int bActExecWhenPrevSusp; /* execute action only when previous one was suspended? */ /* end global config file state variables */ int MarkInterval = 20 * 60; /* interval between marks in seconds - read-only after startup */ int send_to_all = 0; /* send message to all IPv4/IPv6 addresses */ static int NoFork = 0; /* don't fork - don't run in daemon mode - read-only after startup */ static int bHaveMainQueue = 0;/* set to 1 if the main queue - in queueing mode - is available * If the main queue is either not yet ready or not running in * queueing mode (mode DIRECT!), then this is set to 0. */ static int uidDropPriv = 0; /* user-id to which priveleges should be dropped to (AFTER init()!) */ static int gidDropPriv = 0; /* group-id to which priveleges should be dropped to (AFTER init()!) */ extern int errno; static uchar *pszConfDAGFile = NULL; /* name of config DAG file, non-NULL means generate one */ /* main message queue and its configuration parameters */ qqueue_t *pMsgQueue = NULL; /* the main message queue */ static int iMainMsgQueueSize = 10000; /* size of the main message queue above */ static int iMainMsgQHighWtrMark = 8000; /* high water mark for disk-assisted queues */ static int iMainMsgQLowWtrMark = 2000; /* low water mark for disk-assisted queues */ static int iMainMsgQDiscardMark = 9800; /* begin to discard messages */ static int iMainMsgQDiscardSeverity = 8; /* by default, discard nothing to prevent unintentional loss */ static int iMainMsgQueueNumWorkers = 1; /* number of worker threads for the mm queue above */ static queueType_t MainMsgQueType = QUEUETYPE_FIXED_ARRAY; /* type of the main message queue above */ static uchar *pszMainMsgQFName = NULL; /* prefix for the main message queue file */ static int64 iMainMsgQueMaxFileSize = 1024*1024; static int iMainMsgQPersistUpdCnt = 0; /* persist queue info every n updates */ static int bMainMsgQSyncQeueFiles = 0; /* sync queue files on every write? */ static int iMainMsgQtoQShutdown = 1500; /* queue shutdown (ms) */ static int iMainMsgQtoActShutdown = 1000; /* action shutdown (in phase 2) */ static int iMainMsgQtoEnq = 2000; /* timeout for queue enque */ static int iMainMsgQtoWrkShutdown = 60000; /* timeout for worker thread shutdown */ static int iMainMsgQWrkMinMsgs = 100; /* minimum messages per worker needed to start a new one */ static int iMainMsgQDeqSlowdown = 0; /* dequeue slowdown (simple rate limiting) */ static int64 iMainMsgQueMaxDiskSpace = 0; /* max disk space allocated 0 ==> unlimited */ static int64 iMainMsgQueDeqBatchSize = 32; /* dequeue batch size */ static int bMainMsgQSaveOnShutdown = 1; /* save queue on shutdown (when DA enabled)? */ static int iMainMsgQueueDeqtWinFromHr = 0; /* hour begin of time frame when queue is to be dequeued */ static int iMainMsgQueueDeqtWinToHr = 25; /* hour begin of time frame when queue is to be dequeued */ /* Reset config variables to default values. * rgerhards, 2007-07-17 */ static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal) { bLogStatusMsgs = DFLT_bLogStatusMsgs; bActExecWhenPrevSusp = 0; bDebugPrintTemplateList = 1; bDebugPrintCfSysLineHandlerList = 1; bDebugPrintModuleList = 1; bReduceRepeatMsgs = 0; bAbortOnUncleanConfig = 0; free(pszMainMsgQFName); pszMainMsgQFName = NULL; iMainMsgQueueSize = 10000; iMainMsgQHighWtrMark = 8000; iMainMsgQLowWtrMark = 2000; iMainMsgQDiscardMark = 9800; iMainMsgQDiscardSeverity = 8; iMainMsgQueMaxFileSize = 1024 * 1024; iMainMsgQueueNumWorkers = 1; iMainMsgQPersistUpdCnt = 0; bMainMsgQSyncQeueFiles = 0; iMainMsgQtoQShutdown = 1500; iMainMsgQtoActShutdown = 1000; iMainMsgQtoEnq = 2000; iMainMsgQtoWrkShutdown = 60000; iMainMsgQWrkMinMsgs = 100; iMainMsgQDeqSlowdown = 0; bMainMsgQSaveOnShutdown = 1; MainMsgQueType = QUEUETYPE_FIXED_ARRAY; iMainMsgQueMaxDiskSpace = 0; iMainMsgQueDeqBatchSize = 32; glbliActionResumeRetryCount = 0; return RS_RET_OK; } /* hardcoded standard templates (used for defaults) */ static uchar template_DebugFormat[] = "\"Debug line with all properties:\nFROMHOST: '%FROMHOST%', fromhost-ip: '%fromhost-ip%', HOSTNAME: '%HOSTNAME%', PRI: %PRI%,\nsyslogtag '%syslogtag%', programname: '%programname%', APP-NAME: '%APP-NAME%', PROCID: '%PROCID%', MSGID: '%MSGID%',\nTIMESTAMP: '%TIMESTAMP%', STRUCTURED-DATA: '%STRUCTURED-DATA%',\nmsg: '%msg%'\nescaped msg: '%msg:::drop-cc%'\ninputname: %inputname% rawmsg: '%rawmsg%'\n\n\""; static uchar template_SyslogProtocol23Format[] = "\"<%PRI%>1 %TIMESTAMP:::date-rfc3339% %HOSTNAME% %APP-NAME% %PROCID% %MSGID% %STRUCTURED-DATA% %msg%\n\""; static uchar template_TraditionalFileFormat[] = "=RSYSLOG_TraditionalFileFormat"; static uchar template_FileFormat[] = "=RSYSLOG_FileFormat"; static uchar template_ForwardFormat[] = "=RSYSLOG_ForwardFormat"; static uchar template_TraditionalForwardFormat[] = "=RSYSLOG_TraditionalForwardFormat"; static uchar template_WallFmt[] = "\"\r\n\7Message from syslogd@%HOSTNAME% at %timegenerated% ...\r\n %syslogtag%%msg%\n\r\""; static uchar template_StdUsrMsgFmt[] = "\" %syslogtag%%msg%\n\r\""; static uchar template_StdDBFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-mysql%', '%timegenerated:::date-mysql%', %iut%, '%syslogtag%')\",SQL"; static uchar template_StdPgSQLFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-pgsql%', '%timegenerated:::date-pgsql%', %iut%, '%syslogtag%')\",STDSQL"; static uchar template_spoofadr[] = "\"%fromhost-ip%\""; /* end templates */ /* up to the next comment, prototypes that should be removed by reordering */ /* Function prototypes. */ static char **crunch_list(char *list); static void reapchild(); static void debug_switch(); static void sighup_handler(); static int usage(void) { fprintf(stderr, "usage: rsyslogd [-c] [-46AdnqQvwx] [-l] [-s]\n" " [-f] [-i] [-N] [-M]\n" " [-u]\n" "To run rsyslogd in native mode, use \"rsyslogd -c5 \"\n\n" "For further information see http://www.rsyslog.com/doc\n"); exit(1); /* "good" exit - done to terminate usage() */ } /* ------------------------------ some support functions for imdiag ------------------------------ * * This is a bit dirty, but the only way to do it, at least with reasonable effort. * rgerhards, 2009-05-25 */ /* return back the approximate current number of messages in the main message queue * This number includes the messages that reside in an associated DA queue (if * it exists) -- rgerhards, 2009-10-14 */ rsRetVal diagGetMainMsgQSize(int *piSize) { DEFiRet; assert(piSize != NULL); *piSize = (pMsgQueue->pqDA != NULL) ? pMsgQueue->pqDA->iQueueSize : 0; *piSize += pMsgQueue->iQueueSize; RETiRet; } /* ------------------------------ end support functions for imdiag ------------------------------ */ /* rgerhards, 2005-10-24: crunch_list is called only during option processing. So * it is never called once rsyslogd is running. This code * contains some exits, but they are considered safe because they only happen * during startup. Anyhow, when we review the code here, we might want to * reconsider the exit()s. */ static char **crunch_list(char *list) { int count, i; char *p, *q; char **result = NULL; p = list; /* strip off trailing delimiters */ while (p[strlen(p)-1] == LIST_DELIMITER) { count--; p[strlen(p)-1] = '\0'; } /* cut off leading delimiters */ while (p[0] == LIST_DELIMITER) { count--; p++; } /* count delimiters to calculate elements */ for (count=i=0; p[i]; i++) if (p[i] == LIST_DELIMITER) count++; if ((result = (char **)MALLOC(sizeof(char *) * (count+2))) == NULL) { printf ("Sorry, can't get enough memory, exiting.\n"); exit(0); /* safe exit, because only called during startup */ } /* * We now can assume that the first and last * characters are different from any delimiters, * so we don't have to care about this. */ count = 0; while ((q=strchr(p, LIST_DELIMITER))) { result[count] = (char *) MALLOC((q - p + 1) * sizeof(char)); if (result[count] == NULL) { printf ("Sorry, can't get enough memory, exiting.\n"); exit(0); /* safe exit, because only called during startup */ } strncpy(result[count], p, q - p); result[count][q - p] = '\0'; p = q; p++; count++; } if ((result[count] = \ (char *)MALLOC(sizeof(char) * strlen(p) + 1)) == NULL) { printf ("Sorry, can't get enough memory, exiting.\n"); exit(0); /* safe exit, because only called during startup */ } strcpy(result[count],p); result[++count] = NULL; #if 0 count=0; while (result[count]) DBGPRINTF("#%d: %s\n", count, StripDomains[count++]); #endif return result; } void untty(void) #ifdef HAVE_SETSID { if(!Debug) { setsid(); } return; } #else { int i; if(!Debug) { i = open(_PATH_TTY, O_RDWR|O_CLOEXEC); if (i >= 0) { # if !defined(__hpux) (void) ioctl(i, (int) TIOCNOTTY, NULL); # else /* TODO: we need to implement something for HP UX! -- rgerhards, 2008-03-04 */ /* actually, HP UX should have setsid, so the code directly above should * trigger. So the actual question is why it doesn't do that... */ # endif close(i); } } } #endif /* This takes a received message that must be decoded and submits it to * the main message queue. This is a legacy function which is being provided * to aid older input plugins that do not support message creation via * the new interfaces themselves. It is not recommended to use this * function for new plugins. -- rgerhards, 2009-10-12 */ rsRetVal parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int flags, flowControl_t flowCtlType, prop_t *pInputName, struct syslogTime *stTime, time_t ttGenTime) { prop_t *pProp = NULL; msg_t *pMsg; DEFiRet; /* we now create our own message object and submit it to the queue */ if(stTime == NULL) { CHKiRet(msgConstruct(&pMsg)); } else { CHKiRet(msgConstructWithTime(&pMsg, stTime, ttGenTime)); } if(pInputName != NULL) MsgSetInputName(pMsg, pInputName); MsgSetRawMsg(pMsg, (char*)msg, len); MsgSetFlowControlType(pMsg, flowCtlType); pMsg->msgFlags = flags | NEEDS_PARSING; MsgSetRcvFromStr(pMsg, hname, ustrlen(hname), &pProp); CHKiRet(prop.Destruct(&pProp)); CHKiRet(MsgSetRcvFromIPStr(pMsg, hnameIP, ustrlen(hnameIP), &pProp)); CHKiRet(prop.Destruct(&pProp)); CHKiRet(submitMsg(pMsg)); finalize_it: RETiRet; } /* this is a special function used to submit an error message. This * function is also passed to the runtime library as the generic error * message handler. -- rgerhards, 2008-04-17 */ rsRetVal submitErrMsg(int iErr, uchar *msg) { DEFiRet; iRet = logmsgInternal(iErr, LOG_SYSLOG|LOG_ERR, msg, 0); RETiRet; } /* rgerhards 2004-11-09: the following is a function that can be used * to log a message orginating from the syslogd itself. */ rsRetVal logmsgInternal(int iErr, int pri, uchar *msg, int flags) { uchar pszTag[33]; msg_t *pMsg; DEFiRet; CHKiRet(msgConstruct(&pMsg)); MsgSetInputName(pMsg, pInternalInputName); MsgSetRawMsgWOSize(pMsg, (char*)msg); MsgSetHOSTNAME(pMsg, glbl.GetLocalHostName(), ustrlen(glbl.GetLocalHostName())); MsgSetRcvFrom(pMsg, glbl.GetLocalHostNameProp()); MsgSetRcvFromIP(pMsg, pLocalHostIP); MsgSetMSGoffs(pMsg, 0); /* check if we have an error code associated and, if so, * adjust the tag. -- rgerhards, 2008-06-27 */ if(iErr == NO_ERRCODE) { MsgSetTAG(pMsg, UCHAR_CONSTANT("rsyslogd:"), sizeof("rsyslogd:") - 1); } else { size_t len = snprintf((char*)pszTag, sizeof(pszTag), "rsyslogd%d:", iErr); pszTag[32] = '\0'; /* just to make sure... */ MsgSetTAG(pMsg, pszTag, len); } pMsg->iFacility = LOG_FAC(pri); pMsg->iSeverity = LOG_PRI(pri); flags |= INTERNAL_MSG; pMsg->msgFlags = flags; /* we now check if we should print internal messages out to stderr. This was * suggested by HKS as a way to help people troubleshoot rsyslog configuration * (by running it interactively. This makes an awful lot of sense, so I add * it here. -- rgerhards, 2008-07-28 * Note that error messages can not be disable during a config verify. This * permits us to process unmodified config files which otherwise contain a * supressor statement. */ if(((Debug == DEBUG_FULL || NoFork) && bErrMsgToStderr) || iConfigVerify) { if(LOG_PRI(pri) == LOG_ERR) fprintf(stderr, "rsyslogd: %s\n", msg); } if(bHaveMainQueue == 0) { /* not yet in queued mode */ iminternalAddMsg(pMsg); } else { /* we have the queue, so we can simply provide the * message to the queue engine. */ submitMsg(pMsg); } finalize_it: RETiRet; } /* check message against ACL set * rgerhards, 2009-11-16 */ #if 0 static inline rsRetVal chkMsgAgainstACL() { /* if we reach this point, we had a good receive and can process the packet received */ /* check if we have a different sender than before, if so, we need to query some new values */ if(net.CmpHost(&frominet, frominetPrev, socklen) != 0) { CHKiRet(net.cvthname(&frominet, fromHost, fromHostFQDN, fromHostIP)); memcpy(frominetPrev, &frominet, socklen); /* update cache indicator */ /* Here we check if a host is permitted to send us * syslog messages. If it isn't, we do not further * process the message but log a warning (if we are * configured to do this). * rgerhards, 2005-09-26 */ *pbIsPermitted = net.isAllowedSender((uchar*)"UDP", (struct sockaddr *)&frominet, (char*)fromHostFQDN); if(!*pbIsPermitted) { DBGPRINTF("%s is not an allowed sender\n", (char*)fromHostFQDN); if(glbl.GetOption_DisallowWarning) { time_t tt; datetime.GetTime(&tt); if(tt > ttLastDiscard + 60) { ttLastDiscard = tt; errmsg.LogError(0, NO_ERRCODE, "UDP message from disallowed sender %s discarded", (char*)fromHost); } } } } } #endif /* preprocess a batch of messages, that is ready them for actual processing. This is done * as a first stage and totally in parallel to any other worker active in the system. So * it helps us keep up the overall concurrency level. * rgerhards, 2010-06-09 */ static inline rsRetVal preprocessBatch(batch_t *pBatch) { uchar fromHost[NI_MAXHOST]; uchar fromHostIP[NI_MAXHOST]; uchar fromHostFQDN[NI_MAXHOST]; prop_t *propFromHost = NULL; prop_t *propFromHostIP = NULL; int bSingleRuleset; ruleset_t *batchRuleset; /* the ruleset used for all message inside the batch, if there is a single one */ int bIsPermitted; msg_t *pMsg; int i; rsRetVal localRet; DEFiRet; bSingleRuleset = 1; batchRuleset = (pBatch->nElem > 0) ? ((msg_t*) pBatch->pElem[0].pUsrp)->pRuleset : NULL; for(i = 0 ; i < pBatch->nElem && !*(pBatch->pbShutdownImmediate) ; i++) { pMsg = (msg_t*) pBatch->pElem[i].pUsrp; if((pMsg->msgFlags & NEEDS_ACLCHK_U) != 0) { DBGPRINTF("msgConsumer: UDP ACL must be checked for message (hostname-based)\n"); if(net.cvthname(pMsg->rcvFrom.pfrominet, fromHost, fromHostFQDN, fromHostIP) != RS_RET_OK) continue; bIsPermitted = net.isAllowedSender2((uchar*)"UDP", (struct sockaddr *)pMsg->rcvFrom.pfrominet, (char*)fromHostFQDN, 1); if(!bIsPermitted) { DBGPRINTF("Message from '%s' discarded, not a permitted sender host\n", fromHostFQDN); pBatch->pElem[i].state = BATCH_STATE_DISC; } else { /* save some of the info we obtained */ MsgSetRcvFromStr(pMsg, fromHost, ustrlen(fromHost), &propFromHost); CHKiRet(MsgSetRcvFromIPStr(pMsg, fromHostIP, ustrlen(fromHostIP), &propFromHostIP)); pMsg->msgFlags &= ~NEEDS_ACLCHK_U; } } if((pMsg->msgFlags & NEEDS_PARSING) != 0) { if((localRet = parser.ParseMsg(pMsg)) != RS_RET_OK) { DBGPRINTF("Message discarded, parsing error %d\n", localRet); pBatch->pElem[i].state = BATCH_STATE_DISC; } } if(pMsg->pRuleset != batchRuleset) bSingleRuleset = 0; } batchSetSingleRuleset(pBatch, bSingleRuleset); finalize_it: if(propFromHost != NULL) prop.Destruct(&propFromHost); if(propFromHostIP != NULL) prop.Destruct(&propFromHostIP); RETiRet; } /* The consumer of dequeued messages. This function is called by the * queue engine on dequeueing of a message. It runs on a SEPARATE * THREAD. It receives an array of pointers, which it must iterate * over. We do not do any further batching, as this is of no benefit * for the main queue. */ static rsRetVal msgConsumer(void __attribute__((unused)) *notNeeded, batch_t *pBatch, int *pbShutdownImmediate) { DEFiRet; assert(pBatch != NULL); pBatch->pbShutdownImmediate = pbShutdownImmediate; /* TODO: move this to batch creation! */ preprocessBatch(pBatch); ruleset.ProcessBatch(pBatch); //TODO: the BATCH_STATE_COMM must be set somewhere down the road, but we //do not have this yet and so we emulate -- 2010-06-10 int i; for(i = 0 ; i < pBatch->nElem && !*pbShutdownImmediate ; i++) { pBatch->pElem[i].state = BATCH_STATE_COMM; } RETiRet; } /* submit a message to the main message queue. This is primarily * a hook to prevent the need for callers to know about the main message queue * rgerhards, 2008-02-13 */ rsRetVal submitMsg(msg_t *pMsg) { qqueue_t *pQueue; ruleset_t *pRuleset; DEFiRet; ISOBJ_TYPE_assert(pMsg, msg); pRuleset = MsgGetRuleset(pMsg); pQueue = (pRuleset == NULL) ? pMsgQueue : ruleset.GetRulesetQueue(pRuleset); MsgPrepareEnqueue(pMsg); qqueueEnqObj(pQueue, pMsg->flowCtlType, (void*) pMsg); RETiRet; } /* submit multiple messages at once, very similar to submitMsg, just * for multi_submit_t. All messages need to go into the SAME queue! * rgerhards, 2009-06-16 */ rsRetVal multiSubmitMsg(multi_submit_t *pMultiSub) { int i; qqueue_t *pQueue; ruleset_t *pRuleset; DEFiRet; assert(pMultiSub != NULL); if(pMultiSub->nElem == 0) FINALIZE; for(i = 0 ; i < pMultiSub->nElem ; ++i) { MsgPrepareEnqueue(pMultiSub->ppMsgs[i]); } pRuleset = MsgGetRuleset(pMultiSub->ppMsgs[0]); pQueue = (pRuleset == NULL) ? pMsgQueue : ruleset.GetRulesetQueue(pRuleset); iRet = pQueue->MultiEnq(pQueue, pMultiSub); pMultiSub->nElem = 0; finalize_it: RETiRet; } static void reapchild() { int saved_errno = errno; struct sigaction sigAct; memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = reapchild; sigaction(SIGCHLD, &sigAct, NULL); /* reset signal handler -ASP */ while(waitpid(-1, NULL, WNOHANG) > 0); errno = saved_errno; } /* helper to doFlushRptdMsgs() to flush the individual action links via llExecFunc * rgerhards, 2007-08-02 */ DEFFUNC_llExecFunc(flushRptdMsgsActions) { action_t *pAction = (action_t*) pData; assert(pAction != NULL); BEGINfunc LockObj(pAction); /* TODO: time() performance: the call below could be moved to * the beginn of the llExec(). This makes it slightly less correct, but * in an acceptable way. -- rgerhards, 2008-09-16 */ if (pAction->f_prevcount && datetime.GetTime(NULL) >= REPEATTIME(pAction)) { DBGPRINTF("flush %s: repeated %d times, %d sec.\n", module.GetStateName(pAction->pMod), pAction->f_prevcount, repeatinterval[pAction->f_repeatcount]); actionWriteToAction(pAction); BACKOFF(pAction); } UnlockObj(pAction); ENDfunc return RS_RET_OK; /* we ignore errors, we can not do anything either way */ } /* This method flushes repeat messages. */ static void doFlushRptdMsgs(void) { ruleset.IterateAllActions(flushRptdMsgsActions, NULL); } static void debug_switch() { time_t tTime; struct tm tp; struct sigaction sigAct; datetime.GetTime(&tTime); localtime_r(&tTime, &tp); if(debugging_on == 0) { debugging_on = 1; dbgprintf("\n"); dbgprintf("\n"); dbgprintf("********************************************************************************\n"); dbgprintf("Switching debugging_on to true at %2.2d:%2.2d:%2.2d\n", tp.tm_hour, tp.tm_min, tp.tm_sec); dbgprintf("********************************************************************************\n"); } else { dbgprintf("********************************************************************************\n"); dbgprintf("Switching debugging_on to false at %2.2d:%2.2d:%2.2d\n", tp.tm_hour, tp.tm_min, tp.tm_sec); dbgprintf("********************************************************************************\n"); dbgprintf("\n"); dbgprintf("\n"); debugging_on = 0; } memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = debug_switch; sigaction(SIGUSR1, &sigAct, NULL); } void legacyOptsEnq(uchar *line) { legacyOptsLL_t *pNew; pNew = MALLOC(sizeof(legacyOptsLL_t)); if(line == NULL) pNew->line = NULL; else pNew->line = (uchar *) strdup((char *) line); pNew->next = NULL; if(pLegacyOptsLL == NULL) pLegacyOptsLL = pNew; else { legacyOptsLL_t *pThis = pLegacyOptsLL; while(pThis->next != NULL) pThis = pThis->next; pThis->next = pNew; } } void legacyOptsFree(void) { legacyOptsLL_t *pThis = pLegacyOptsLL, *pNext; while(pThis != NULL) { if(pThis->line != NULL) free(pThis->line); pNext = pThis->next; free(pThis); pThis = pNext; } } void legacyOptsHook(void) { legacyOptsLL_t *pThis = pLegacyOptsLL; while(pThis != NULL) { if(pThis->line != NULL) { errno = 0; errmsg.LogError(0, NO_ERRCODE, "Warning: backward compatibility layer added to following " "directive to rsyslog.conf: %s", pThis->line); conf.cfsysline(pThis->line); } pThis = pThis->next; } } void legacyOptsParseTCP(char ch, char *arg) { register int i; register char *pArg = arg; static char conflict = '\0'; if((conflict == 'g' && ch == 't') || (conflict == 't' && ch == 'g')) { fprintf(stderr, "rsyslogd: If you want to use both -g and -t, use directives instead, -%c ignored.\n", ch); return; } else conflict = ch; /* extract port */ i = 0; while(isdigit((int) *pArg)) i = i * 10 + *pArg++ - '0'; /* number of sessions */ if(*pArg == '\0' || *pArg == ',') { if(ch == 't') legacyOptsEnq((uchar *) "ModLoad imtcp"); else if(ch == 'g') legacyOptsEnq((uchar *) "ModLoad imgssapi"); if(i >= 0 && i <= 65535) { uchar line[30]; if(ch == 't') { snprintf((char *) line, sizeof(line), "InputTCPServerRun %d", i); } else if(ch == 'g') { snprintf((char *) line, sizeof(line), "InputGSSServerRun %d", i); } legacyOptsEnq(line); } else { if(ch == 't') { fprintf(stderr, "rsyslogd: Invalid TCP listen port %d - changed to 514.\n", i); legacyOptsEnq((uchar *) "InputTCPServerRun 514"); } else if(ch == 'g') { fprintf(stderr, "rsyslogd: Invalid GSS listen port %d - changed to 514.\n", i); legacyOptsEnq((uchar *) "InputGSSServerRun 514"); } } if(*pArg == ',') { ++pArg; while(isspace((int) *pArg)) ++pArg; i = 0; while(isdigit((int) *pArg)) { i = i * 10 + *pArg++ - '0'; } if(i > 0) { uchar line[30]; snprintf((char *) line, sizeof(line), "InputTCPMaxSessions %d", i); legacyOptsEnq(line); } else { if(ch == 't') { fprintf(stderr, "rsyslogd: TCP session max configured " "to %d [-t %s] - changing to 1.\n", i, arg); legacyOptsEnq((uchar *) "InputTCPMaxSessions 1"); } else if (ch == 'g') { fprintf(stderr, "rsyslogd: GSS session max configured " "to %d [-g %s] - changing to 1.\n", i, arg); legacyOptsEnq((uchar *) "InputTCPMaxSessions 1"); } } } } else fprintf(stderr, "rsyslogd: Invalid -t %s command line option.\n", arg); } /* doDie() is a signal handler. If called, it sets the bFinished variable * to indicate the program should terminate. However, it does not terminate * it itself, because that causes issues with multi-threading. The actual * termination is then done on the main thread. This solution might introduce * a minimal delay, but it is much cleaner than the approach of doing everything * inside the signal handler. * rgerhards, 2005-10-26 * Note: we do not call DBGPRINTF() as this may cause us to block in case something * with the threading is wrong. */ static void doDie(int sig) { # define MSG1 "DoDie called.\n" # define MSG2 "DoDie called 5 times - unconditional exit\n" static int iRetries = 0; /* debug aid */ dbgprintf(MSG1); if(Debug == DEBUG_FULL) write(1, MSG1, sizeof(MSG1) - 1); if(iRetries++ == 4) { if(Debug == DEBUG_FULL) write(1, MSG2, sizeof(MSG2) - 1); abort(); } bFinished = sig; # undef MSG1 # undef MSG2 } /* This function frees all dynamically allocated memory for program termination. * It must be called only immediately before exit(). It is primarily an aid * for memory debuggers, which prevents cluttered outupt. * rgerhards, 2008-03-20 */ static void freeAllDynMemForTermination(void) { free(pszMainMsgQFName); free(pModDir); free(pszConfDAGFile); } /* Finalize and destruct all actions. */ static inline void destructAllActions(void) { ruleset.DestructAllActions(); bHaveMainQueue = 0; // flag that internal messages need to be temporarily stored } /* die() is called when the program shall end. This typically only occurs * during sigterm or during the initialization. * As die() is intended to shutdown rsyslogd, it is * safe to call exit() here. Just make sure that die() itself is not called * at inapropriate places. As a general rule of thumb, it is a bad idea to add * any calls to die() in new code! * rgerhards, 2005-10-24 */ static void die(int sig) { char buf[256]; DBGPRINTF("exiting on signal %d\n", sig); /* IMPORTANT: we should close the inputs first, and THEN send our termination * message. If we do it the other way around, logmsgInternal() may block on * a full queue and the inputs still fill up that queue. Depending on the * scheduling order, we may end up with logmsgInternal being held for a quite * long time. When the inputs are terminated first, that should not happen * because the queue is drained in parallel. The situation could only become * an issue with extremely long running actions in a queue full environment. * However, such actions are at least considered poorly written, if not * outright wrong. So we do not care about this very remote problem. * rgerhards, 2008-01-11 */ /* close the inputs */ DBGPRINTF("Terminating input threads...\n"); glbl.SetGlobalInputTermination(); thrdTerminateAll(); /* and THEN send the termination log message (see long comment above) */ if(sig && bLogStatusMsgs) { (void) snprintf(buf, sizeof(buf) / sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"]" " exiting on signal %d.", (int) myPid, sig); errno = 0; logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*)buf, 0); } /* drain queue (if configured so) and stop main queue worker thread pool */ DBGPRINTF("Terminating main queue...\n"); qqueueDestruct(&pMsgQueue); pMsgQueue = NULL; /* Free ressources and close connections. This includes flushing any remaining * repeated msgs. */ DBGPRINTF("Terminating outputs...\n"); destructAllActions(); DBGPRINTF("all primary multi-thread sources have been terminated - now doing aux cleanup...\n"); /* rger 2005-02-22 * now clean up the in-memory structures. OK, the OS * would also take care of that, but if we do it * ourselfs, this makes finding memory leaks a lot * easier. */ tplDeleteAll(); /* de-init some modules */ modExitIminternal(); /*dbgPrintAllDebugInfo(); / * this is the last spot where this can be done - below output modules are unloaded! */ /* the following line cleans up CfSysLineHandlers that were not based on loadable * modules. As such, they are not yet cleared. */ unregCfSysLineHdlrs(); legacyOptsFree(); /* destruct our global properties */ if(pInternalInputName != NULL) prop.Destruct(&pInternalInputName); if(pLocalHostIP != NULL) prop.Destruct(&pLocalHostIP); /* terminate the remaining classes */ GlobalClassExit(); module.UnloadAndDestructAll(eMOD_LINK_ALL); DBGPRINTF("Clean shutdown completed, bye\n"); /* dbgClassExit MUST be the last one, because it de-inits the debug system */ dbgClassExit(); /* free all remaining memory blocks - this is not absolutely necessary, but helps * us keep memory debugger logs clean and this is in aid in developing. It doesn't * cost much time, so we do it always. -- rgerhards, 2008-03-20 */ freeAllDynMemForTermination(); /* NO CODE HERE - feeelAllDynMemForTermination() must be the last thing before exit()! */ remove_pid(PidFile); exit(0); /* "good" exit, this is the terminator function for rsyslog [die()] */ } /* * Signal handler to terminate the parent process. * rgerhards, 2005-10-24: this is only called during forking of the * detached syslogd. I consider this method to be safe. */ static void doexit() { exit(0); /* "good" exit, only during child-creation */ } /* set the maximum message size */ static rsRetVal setMaxMsgSize(void __attribute__((unused)) *pVal, long iNewVal) { return glbl.SetMaxLine(iNewVal); } /* set the action resume interval */ static rsRetVal setActionResumeInterval(void __attribute__((unused)) *pVal, int iNewVal) { return actionSetGlobalResumeInterval(iNewVal); } /* set the processes max number ob files (upon configuration request) * 2009-04-14 rgerhards */ static rsRetVal setMaxFiles(void __attribute__((unused)) *pVal, int iFiles) { struct rlimit maxFiles; char errStr[1024]; DEFiRet; maxFiles.rlim_cur = iFiles; maxFiles.rlim_max = iFiles; if(setrlimit(RLIMIT_NOFILE, &maxFiles) < 0) { /* NOTE: under valgrind, we seem to be unable to extend the size! */ rs_strerror_r(errno, errStr, sizeof(errStr)); errmsg.LogError(0, RS_RET_ERR_RLIM_NOFILE, "could not set process file limit to %d: %s [kernel max %ld]", iFiles, errStr, (long) maxFiles.rlim_max); ABORT_FINALIZE(RS_RET_ERR_RLIM_NOFILE); } #ifdef USE_UNLIMITED_SELECT glbl.SetFdSetSize(howmany(iFiles, __NFDBITS) * sizeof (fd_mask)); #endif DBGPRINTF("Max number of files set to %d [kernel max %ld].\n", iFiles, (long) maxFiles.rlim_max); finalize_it: RETiRet; } /* set the processes umask (upon configuration request) */ static rsRetVal setUmask(void __attribute__((unused)) *pVal, int iUmask) { umask(iUmask); DBGPRINTF("umask set to 0%3.3o.\n", iUmask); return RS_RET_OK; } /* drop to specified group * if something goes wrong, the function never returns * Note that such an abort can cause damage to on-disk structures, so we should * re-design the "interface" in the long term. -- rgerhards, 2008-11-26 */ static void doDropPrivGid(int iGid) { int res; uchar szBuf[1024]; res = setgroups(0, NULL); /* remove all supplementary group IDs */ if(res) { perror("could not remove supplemental group IDs"); exit(1); } DBGPRINTF("setgroups(0, NULL): %d\n", res); res = setgid(iGid); if(res) { /* if we can not set the userid, this is fatal, so let's unconditionally abort */ perror("could not set requested group id"); exit(1); } DBGPRINTF("setgid(%d): %d\n", iGid, res); snprintf((char*)szBuf, sizeof(szBuf)/sizeof(uchar), "rsyslogd's groupid changed to %d", iGid); logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, szBuf, 0); } /* drop to specified user * if something goes wrong, the function never returns * Note that such an abort can cause damage to on-disk structures, so we should * re-design the "interface" in the long term. -- rgerhards, 2008-11-19 */ static void doDropPrivUid(int iUid) { int res; uchar szBuf[1024]; res = setuid(iUid); if(res) { /* if we can not set the userid, this is fatal, so let's unconditionally abort */ perror("could not set requested userid"); exit(1); } DBGPRINTF("setuid(%d): %d\n", iUid, res); snprintf((char*)szBuf, sizeof(szBuf)/sizeof(uchar), "rsyslogd's userid changed to %d", iUid); logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, szBuf, 0); } /* helper to generateConfigDAG, to print out all actions via * the llExecFunc() facility. * rgerhards, 2007-08-02 */ struct dag_info { FILE *fp; /* output file */ int iActUnit; /* current action unit number */ int iAct; /* current action in unit */ int bDiscarded; /* message discarded (config error) */ }; DEFFUNC_llExecFunc(generateConfigDAGAction) { action_t *pAction; uchar *pszModName; uchar *pszVertexName; struct dag_info *pDagInfo; DEFiRet; pDagInfo = (struct dag_info*) pParam; pAction = (action_t*) pData; pszModName = module.GetStateName(pAction->pMod); /* vertex */ if(pAction->pszName == NULL) { if(!strcmp((char*)pszModName, "builtin-discard")) pszVertexName = (uchar*)"discard"; else pszVertexName = pszModName; } else { pszVertexName = pAction->pszName; } fprintf(pDagInfo->fp, "\tact%d_%d\t\t[label=\"%s\"%s%s]\n", pDagInfo->iActUnit, pDagInfo->iAct, pszVertexName, pDagInfo->bDiscarded ? " style=dotted color=red" : "", (pAction->pQueue->qType == QUEUETYPE_DIRECT) ? "" : " shape=hexagon" ); /* edge */ if(pDagInfo->iAct == 0) { } else { fprintf(pDagInfo->fp, "\tact%d_%d -> act%d_%d[%s%s]\n", pDagInfo->iActUnit, pDagInfo->iAct - 1, pDagInfo->iActUnit, pDagInfo->iAct, pDagInfo->bDiscarded ? " style=dotted color=red" : "", pAction->bExecWhenPrevSusp ? " label=\"only if\\nsuspended\"" : "" ); } /* check for discard */ if(!strcmp((char*) pszModName, "builtin-discard")) { fprintf(pDagInfo->fp, "\tact%d_%d\t\t[shape=box]\n", pDagInfo->iActUnit, pDagInfo->iAct); pDagInfo->bDiscarded = 1; } ++pDagInfo->iAct; RETiRet; } /* create config DAG * This functions takes a rsyslog config and produces a .dot file for use * with graphviz (http://www.graphviz.org). This is done in an effort to * document, and also potentially troubleshoot, configurations. Plus, I * consider it a nice feature to explain some concepts. Note that the * current version only produces a graph with relatively little information. * This is a foundation that may be later expanded (if it turns out to be * useful enough). * rgerhards, 2009-05-11 */ static rsRetVal generateConfigDAG(uchar *pszDAGFile) { //rule_t *f; FILE *fp; int iActUnit = 1; //int bHasFilter = 0; /* filter associated with this action unit? */ //int bHadFilter; //int i; struct dag_info dagInfo; //char *pszFilterName; char szConnectingNode[64]; DEFiRet; assert(pszDAGFile != NULL); logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*) "Configuration graph generation is unfortunately disabled " "in the current code base.", 0); ABORT_FINALIZE(RS_RET_FILENAME_INVALID); if((fp = fopen((char*) pszDAGFile, "w")) == NULL) { logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*) "configuraton graph output file could not be opened, none generated", 0); ABORT_FINALIZE(RS_RET_FILENAME_INVALID); } dagInfo.fp = fp; /* from here on, we assume writes go well. This here is a really * unimportant utility function and if something goes wrong, it has * almost no effect. So let's not overdo this... */ fprintf(fp, "# graph created by rsyslog " VERSION "\n\n" "# use the dot tool from http://www.graphviz.org to visualize!\n" "digraph rsyslogConfig {\n" "\tinputs [shape=tripleoctagon]\n" "\tinputs -> act0_0\n" "\tact0_0 [label=\"main\\nqueue\" shape=hexagon]\n" /*"\tmainq -> act1_0\n"*/ ); strcpy(szConnectingNode, "act0_0"); dagInfo.bDiscarded = 0; /* TODO: re-enable! */ #if 0 for(f = Files; f != NULL ; f = f->f_next) { /* BSD-Style filters are currently ignored */ bHadFilter = bHasFilter; if(f->f_filter_type == FILTER_PRI) { bHasFilter = 0; for (i = 0; i <= LOG_NFACILITIES; i++) if (f->f_filterData.f_pmask[i] != 0xff) { bHasFilter = 1; break; } } else { bHasFilter = 1; } /* we know we have a filter, so it can be false */ switch(f->f_filter_type) { case FILTER_PRI: pszFilterName = "pri filter"; break; case FILTER_PROP: pszFilterName = "property filter"; break; case FILTER_EXPR: pszFilterName = "script filter"; break; } /* write action unit node */ if(bHasFilter) { fprintf(fp, "\t%s -> act%d_end\t[label=\"%s:\\nfalse\"]\n", szConnectingNode, iActUnit, pszFilterName); fprintf(fp, "\t%s -> act%d_0\t[label=\"%s:\\ntrue\"]\n", szConnectingNode, iActUnit, pszFilterName); fprintf(fp, "\tact%d_end\t\t\t\t[shape=point]\n", iActUnit); snprintf(szConnectingNode, sizeof(szConnectingNode), "act%d_end", iActUnit); } else { fprintf(fp, "\t%s -> act%d_0\t[label=\"no filter\"]\n", szConnectingNode, iActUnit); snprintf(szConnectingNode, sizeof(szConnectingNode), "act%d_0", iActUnit); } /* draw individual nodes */ dagInfo.iActUnit = iActUnit; dagInfo.iAct = 0; dagInfo.bDiscarded = 0; llExecFunc(&f->llActList, generateConfigDAGAction, &dagInfo); /* actions */ /* finish up */ if(bHasFilter && !dagInfo.bDiscarded) { fprintf(fp, "\tact%d_%d -> %s\n", iActUnit, dagInfo.iAct - 1, szConnectingNode); } ++iActUnit; } #endif fprintf(fp, "\t%s -> act%d_0\n", szConnectingNode, iActUnit); fprintf(fp, "\tact%d_0\t\t[label=discard shape=box]\n" "}\n", iActUnit); fclose(fp); finalize_it: RETiRet; } /* print debug information as part of init(). This pretty much * outputs the whole config of rsyslogd. I've moved this code * out of init() to clean it somewhat up. * rgerhards, 2007-07-31 */ static void dbgPrintInitInfo(void) { ruleset.DebugPrintAll(); DBGPRINTF("\n"); if(bDebugPrintTemplateList) tplPrintList(); if(bDebugPrintModuleList) module.PrintList(); ochPrintList(); if(bDebugPrintCfSysLineHandlerList) dbgPrintCfSysLineHandlers(); DBGPRINTF("Messages with malicious PTR DNS Records are %sdropped.\n", glbl.GetDropMalPTRMsgs() ? "" : "not "); DBGPRINTF("Main queue size %d messages.\n", iMainMsgQueueSize); DBGPRINTF("Main queue worker threads: %d, wThread shutdown: %d, Perists every %d updates.\n", iMainMsgQueueNumWorkers, iMainMsgQtoWrkShutdown, iMainMsgQPersistUpdCnt); DBGPRINTF("Main queue timeouts: shutdown: %d, action completion shutdown: %d, enq: %d\n", iMainMsgQtoQShutdown, iMainMsgQtoActShutdown, iMainMsgQtoEnq); DBGPRINTF("Main queue watermarks: high: %d, low: %d, discard: %d, discard-severity: %d\n", iMainMsgQHighWtrMark, iMainMsgQLowWtrMark, iMainMsgQDiscardMark, iMainMsgQDiscardSeverity); DBGPRINTF("Main queue save on shutdown %d, max disk space allowed %lld\n", bMainMsgQSaveOnShutdown, iMainMsgQueMaxDiskSpace); /* TODO: add iActionRetryCount = 0; iActionRetryInterval = 30000; static int iMainMsgQtoWrkMinMsgs = 100; static int iMainMsgQbSaveOnShutdown = 1; iMainMsgQueMaxDiskSpace = 0; setQPROP(qqueueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", 100); setQPROP(qqueueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", 1); */ DBGPRINTF("Work Directory: '%s'.\n", glbl.GetWorkDir()); } /* Actually run the input modules. This happens after privileges are dropped, * if that is requested. */ static rsRetVal runInputModules(void) { modInfo_t *pMod; int bNeedsCancel; BEGINfunc /* loop through all modules and activate them (brr...) */ pMod = module.GetNxtType(NULL, eMOD_IN); while(pMod != NULL) { if(pMod->mod.im.bCanRun) { /* activate here */ bNeedsCancel = (pMod->isCompatibleWithFeature(sFEATURENonCancelInputTermination) == RS_RET_OK) ? 0 : 1; thrdCreate(pMod->mod.im.runInput, pMod->mod.im.afterRun, bNeedsCancel); } pMod = module.GetNxtType(pMod, eMOD_IN); } ENDfunc return RS_RET_OK; /* intentional: we do not care about module errors */ } /* Start the input modules. This function will probably undergo big changes * while we implement the input module interface. For now, it does the most * important thing to get at least my poor initial input modules up and * running. Almost no config option is taken. * rgerhards, 2007-12-14 */ static rsRetVal startInputModules(void) { DEFiRet; modInfo_t *pMod; /* loop through all modules and activate them (brr...) */ pMod = module.GetNxtType(NULL, eMOD_IN); while(pMod != NULL) { iRet = pMod->mod.im.willRun(); pMod->mod.im.bCanRun = (iRet == RS_RET_OK); if(!pMod->mod.im.bCanRun) { DBGPRINTF("module %lx will not run, iRet %d\n", (unsigned long) pMod, iRet); } pMod = module.GetNxtType(pMod, eMOD_IN); } ENDfunc return RS_RET_OK; /* intentional: we do not care about module errors */ } /* create a main message queue, now also used for ruleset queues. This function * needs to be moved to some other module, but it is considered acceptable for * the time being (remember that we want to restructure config processing at large!). * rgerhards, 2009-10-27 */ rsRetVal createMainQueue(qqueue_t **ppQueue, uchar *pszQueueName) { DEFiRet; /* switch the message object to threaded operation, if necessary */ if(MainMsgQueType == QUEUETYPE_DIRECT || iMainMsgQueueNumWorkers > 1) { MsgEnableThreadSafety(); } /* create message queue */ CHKiRet_Hdlr(qqueueConstruct(ppQueue, MainMsgQueType, iMainMsgQueueNumWorkers, iMainMsgQueueSize, msgConsumer)) { /* no queue is fatal, we need to give up in that case... */ errmsg.LogError(0, iRet, "could not create (ruleset) main message queue"); \ } /* name our main queue object (it's not fatal if it fails...) */ obj.SetName((obj_t*) (*ppQueue), pszQueueName); /* ... set some properties ... */ # define setQPROP(func, directive, data) \ CHKiRet_Hdlr(func(*ppQueue, data)) { \ errmsg.LogError(0, NO_ERRCODE, "Invalid " #directive ", error %d. Ignored, running with default setting", iRet); \ } # define setQPROPstr(func, directive, data) \ CHKiRet_Hdlr(func(*ppQueue, data, (data == NULL)? 0 : strlen((char*) data))) { \ errmsg.LogError(0, NO_ERRCODE, "Invalid " #directive ", error %d. Ignored, running with default setting", iRet); \ } setQPROP(qqueueSetMaxFileSize, "$MainMsgQueueFileSize", iMainMsgQueMaxFileSize); setQPROP(qqueueSetsizeOnDiskMax, "$MainMsgQueueMaxDiskSpace", iMainMsgQueMaxDiskSpace); setQPROP(qqueueSetiDeqBatchSize, "$MainMsgQueueDequeueBatchSize", iMainMsgQueDeqBatchSize); setQPROPstr(qqueueSetFilePrefix, "$MainMsgQueueFileName", pszMainMsgQFName); setQPROP(qqueueSetiPersistUpdCnt, "$MainMsgQueueCheckpointInterval", iMainMsgQPersistUpdCnt); setQPROP(qqueueSetbSyncQueueFiles, "$MainMsgQueueSyncQueueFiles", bMainMsgQSyncQeueFiles); setQPROP(qqueueSettoQShutdown, "$MainMsgQueueTimeoutShutdown", iMainMsgQtoQShutdown ); setQPROP(qqueueSettoActShutdown, "$MainMsgQueueTimeoutActionCompletion", iMainMsgQtoActShutdown); setQPROP(qqueueSettoWrkShutdown, "$MainMsgQueueWorkerTimeoutThreadShutdown", iMainMsgQtoWrkShutdown); setQPROP(qqueueSettoEnq, "$MainMsgQueueTimeoutEnqueue", iMainMsgQtoEnq); setQPROP(qqueueSetiHighWtrMrk, "$MainMsgQueueHighWaterMark", iMainMsgQHighWtrMark); setQPROP(qqueueSetiLowWtrMrk, "$MainMsgQueueLowWaterMark", iMainMsgQLowWtrMark); setQPROP(qqueueSetiDiscardMrk, "$MainMsgQueueDiscardMark", iMainMsgQDiscardMark); setQPROP(qqueueSetiDiscardSeverity, "$MainMsgQueueDiscardSeverity", iMainMsgQDiscardSeverity); setQPROP(qqueueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", iMainMsgQWrkMinMsgs); setQPROP(qqueueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", bMainMsgQSaveOnShutdown); setQPROP(qqueueSetiDeqSlowdown, "$MainMsgQueueDequeueSlowdown", iMainMsgQDeqSlowdown); setQPROP(qqueueSetiDeqtWinFromHr, "$MainMsgQueueDequeueTimeBegin", iMainMsgQueueDeqtWinFromHr); setQPROP(qqueueSetiDeqtWinToHr, "$MainMsgQueueDequeueTimeEnd", iMainMsgQueueDeqtWinToHr); # undef setQPROP # undef setQPROPstr /* ... and finally start the queue! */ CHKiRet_Hdlr(qqueueStart(*ppQueue)) { /* no queue is fatal, we need to give up in that case... */ errmsg.LogError(0, iRet, "could not start (ruleset) main message queue"); \ } RETiRet; } /* INIT -- Initialize syslogd * Note that if iConfigVerify is set, only the config file is verified but nothing * else happens. -- rgerhards, 2008-07-28 */ static rsRetVal init(void) { rsRetVal localRet; int iNbrActions; int bHadConfigErr = 0; ruleset_t *pRuleset; char cbuf[BUFSIZ]; char bufStartUpMsg[512]; struct sigaction sigAct; DEFiRet; DBGPRINTF("rsyslog %s - called init()\n", VERSION); /* construct the default ruleset */ ruleset.Construct(&pRuleset); ruleset.SetName(pRuleset, UCHAR_CONSTANT("RSYSLOG_DefaultRuleset")); ruleset.ConstructFinalize(pRuleset); /* open the configuration file */ localRet = conf.processConfFile(ConfFile); CHKiRet(conf.GetNbrActActions(&iNbrActions)); if(localRet != RS_RET_OK) { errmsg.LogError(0, localRet, "CONFIG ERROR: could not interpret master config file '%s'.", ConfFile); bHadConfigErr = 1; } else if(iNbrActions == 0) { errmsg.LogError(0, RS_RET_NO_ACTIONS, "CONFIG ERROR: there are no active actions configured. Inputs will " "run, but no output whatsoever is created."); bHadConfigErr = 1; } if((localRet != RS_RET_OK && localRet != RS_RET_NONFATAL_CONFIG_ERR) || iNbrActions == 0) { /* rgerhards: this code is executed to set defaults when the * config file could not be opened. We might think about * abandoning the run in this case - but this, too, is not * very clever... So we stick with what we have. * We ignore any errors while doing this - we would be lost anyhow... */ errmsg.LogError(0, NO_ERRCODE, "EMERGENCY CONFIGURATION ACTIVATED - fix rsyslog config file!"); /* note: we previously used _POSIY_TTY_NAME_MAX+1, but this turned out to be * too low on linux... :-S -- rgerhards, 2008-07-28 */ char szTTYNameBuf[128]; rule_t *pRule = NULL; /* initialization to NULL is *vitally* important! */ conf.cfline(UCHAR_CONSTANT("*.ERR\t" _PATH_CONSOLE), &pRule); conf.cfline(UCHAR_CONSTANT("syslog.*\t" _PATH_CONSOLE), &pRule); conf.cfline(UCHAR_CONSTANT("*.PANIC\t*"), &pRule); conf.cfline(UCHAR_CONSTANT("syslog.*\troot"), &pRule); if(ttyname_r(0, szTTYNameBuf, sizeof(szTTYNameBuf)) == 0) { snprintf(cbuf,sizeof(cbuf), "*.*\t%s", szTTYNameBuf); conf.cfline((uchar*)cbuf, &pRule); } else { DBGPRINTF("error %d obtaining controlling terminal, not using that emergency rule\n", errno); } ruleset.AddRule(ruleset.GetCurrent(), &pRule); } legacyOptsHook(); /* some checks */ if(iMainMsgQueueNumWorkers < 1) { errmsg.LogError(0, NO_ERRCODE, "$MainMsgQueueNumWorkers must be at least 1! Set to 1.\n"); iMainMsgQueueNumWorkers = 1; } if(MainMsgQueType == QUEUETYPE_DISK) { errno = 0; /* for logerror! */ if(glbl.GetWorkDir() == NULL) { errmsg.LogError(0, NO_ERRCODE, "No $WorkDirectory specified - can not run main message queue in 'disk' mode. " "Using 'FixedArray' instead.\n"); MainMsgQueType = QUEUETYPE_FIXED_ARRAY; } if(pszMainMsgQFName == NULL) { errmsg.LogError(0, NO_ERRCODE, "No $MainMsgQueueFileName specified - can not run main message queue in " "'disk' mode. Using 'FixedArray' instead.\n"); MainMsgQueType = QUEUETYPE_FIXED_ARRAY; } } /* check if we need to generate a config DAG and, if so, do that */ if(pszConfDAGFile != NULL) generateConfigDAG(pszConfDAGFile); /* we are done checking the config - now validate if we should actually run or not. * If not, terminate. -- rgerhards, 2008-07-25 */ if(iConfigVerify) { if(bHadConfigErr) { /* a bit dirty, but useful... */ exit(1); } ABORT_FINALIZE(RS_RET_VALIDATION_RUN); } if(bAbortOnUncleanConfig && bHadConfigErr) { fprintf(stderr, "rsyslogd: $AbortOnUncleanConfig is set, and config is not clean.\n" "Check error log for details, fix errors and restart. As a last\n" "resort, you may want to remove $AbortOnUncleanConfig to permit a\n" "startup with a dirty config.\n"); exit(2); } /* create message queue */ CHKiRet_Hdlr(createMainQueue(&pMsgQueue, UCHAR_CONSTANT("main Q"))) { /* no queue is fatal, we need to give up in that case... */ fprintf(stderr, "fatal error %d: could not create message queue - rsyslogd can not run!\n", iRet); exit(1); } bHaveMainQueue = (MainMsgQueType == QUEUETYPE_DIRECT) ? 0 : 1; DBGPRINTF("Main processing queue is initialized and running\n"); /* the output part and the queue is now ready to run. So it is a good time * to initialize the inputs. Please note that the net code above should be * shuffled to down here once we have everything in input modules. * rgerhards, 2007-12-14 * NOTE: as of 2009-06-29, the input modules are initialized, but not yet run. * Keep in mind. though, that the outputs already run if the queue was * persisted to disk. -- rgerhards */ startInputModules(); if(Debug) { dbgPrintInitInfo(); } memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = sighup_handler; sigaction(SIGHUP, &sigAct, NULL); DBGPRINTF(" started.\n"); /* we now generate the startup message. It now includes everything to * identify this instance. -- rgerhards, 2005-08-17 */ if(bLogStatusMsgs) { snprintf(bufStartUpMsg, sizeof(bufStartUpMsg)/sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"] start", (int) myPid); logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*)bufStartUpMsg, 0); } finalize_it: RETiRet; } /* Switch the default ruleset (that, what servcies bind to if nothing specific * is specified). * rgerhards, 2009-06-12 */ static rsRetVal setDefaultRuleset(void __attribute__((unused)) *pVal, uchar *pszName) { DEFiRet; CHKiRet(ruleset.SetDefaultRuleset(pszName)); finalize_it: free(pszName); /* no longer needed */ RETiRet; } /* Put the rsyslog main thread to sleep for n seconds. This was introduced as * a quick and dirty workaround for a privilege drop race in regard to listener * startup, which itself was a result of the not-yet-done proper coding of * privilege drop code (quite some effort). It may be useful for other occasions, too. * is specified). * rgerhards, 2009-06-12 */ static rsRetVal putToSleep(void __attribute__((unused)) *pVal, int iNewVal) { DEFiRet; DBGPRINTF("rsyslog main thread put to sleep via $sleep %d directive...\n", iNewVal); srSleep(iNewVal, 0); DBGPRINTF("rsyslog main thread continues after $sleep %d\n", iNewVal); RETiRet; } /* Switch to either an already existing rule set or start a new one. The * named rule set becomes the new "current" rule set (what means that new * actions are added to it). * rgerhards, 2009-06-12 */ static rsRetVal setCurrRuleset(void __attribute__((unused)) *pVal, uchar *pszName) { ruleset_t *pRuleset; rsRetVal localRet; DEFiRet; localRet = ruleset.SetCurrRuleset(pszName); if(localRet == RS_RET_NOT_FOUND) { DBGPRINTF("begin new current rule set '%s'\n", pszName); CHKiRet(ruleset.Construct(&pRuleset)); CHKiRet(ruleset.SetName(pRuleset, pszName)); CHKiRet(ruleset.ConstructFinalize(pRuleset)); } else { ABORT_FINALIZE(localRet); } finalize_it: free(pszName); /* no longer needed */ RETiRet; } /* set the main message queue mode * rgerhards, 2008-01-03 */ static rsRetVal setMainMsgQueType(void __attribute__((unused)) *pVal, uchar *pszType) { DEFiRet; if (!strcasecmp((char *) pszType, "fixedarray")) { MainMsgQueType = QUEUETYPE_FIXED_ARRAY; DBGPRINTF("main message queue type set to FIXED_ARRAY\n"); } else if (!strcasecmp((char *) pszType, "linkedlist")) { MainMsgQueType = QUEUETYPE_LINKEDLIST; DBGPRINTF("main message queue type set to LINKEDLIST\n"); } else if (!strcasecmp((char *) pszType, "disk")) { MainMsgQueType = QUEUETYPE_DISK; DBGPRINTF("main message queue type set to DISK\n"); } else if (!strcasecmp((char *) pszType, "direct")) { MainMsgQueType = QUEUETYPE_DIRECT; DBGPRINTF("main message queue type set to DIRECT (no queueing at all)\n"); } else { errmsg.LogError(0, RS_RET_INVALID_PARAMS, "unknown mainmessagequeuetype parameter: %s", (char *) pszType); iRet = RS_RET_INVALID_PARAMS; } free(pszType); /* no longer needed */ RETiRet; } /* * The following function is resposible for handling a SIGHUP signal. Since * we are now doing mallocs/free as part of init we had better not being * doing this during a signal handler. Instead this function simply sets * a flag variable which will tells the main loop to do "the right thing". */ void sighup_handler() { struct sigaction sigAct; bHadHUP = 1; memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = sighup_handler; sigaction(SIGHUP, &sigAct, NULL); } void sigttin_handler() { } /* this function pulls all internal messages from the buffer * and puts them into the processing engine. * We can only do limited error handling, as this would not * really help us. TODO: add error messages? * rgerhards, 2007-08-03 */ static inline void processImInternal(void) { msg_t *pMsg; while(iminternalRemoveMsg(&pMsg) == RS_RET_OK) { submitMsg(pMsg); } } /* helper to doHUP(), this "HUPs" each action. The necessary locking * is done inside the action class and nothing we need to take care of. * rgerhards, 2008-10-22 */ DEFFUNC_llExecFunc(doHUPActions) { BEGINfunc actionCallHUPHdlr((action_t*) pData); ENDfunc return RS_RET_OK; /* we ignore errors, we can not do anything either way */ } /* This function processes a HUP after one has been detected. Note that this * is *NOT* the sighup handler. The signal is recorded by the handler, that record * detected inside the mainloop and then this function is called to do the * real work. -- rgerhards, 2008-10-22 */ static inline void doHUP(void) { char buf[512]; if(bLogStatusMsgs) { snprintf(buf, sizeof(buf) / sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"] rsyslogd was HUPed", (int) myPid); errno = 0; logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*)buf, 0); } ruleset.IterateAllActions(doHUPActions, NULL); } /* This is the main processing loop. It is called after successful initialization. * When it returns, the syslogd terminates. * Its sole function is to provide some housekeeping things. The real work is done * by the other threads spawned. */ static void mainloop(void) { struct timeval tvSelectTimeout; BEGINfunc /* first check if we have any internal messages queued and spit them out. We used * to do that on any loop iteration, but that is no longer necessry. The reason * is that once we reach this point here, we always run on multiple threads and * thus the main queue is properly initialized. -- rgerhards, 2008-06-09 */ processImInternal(); while(!bFinished){ /* this is now just a wait - please note that we do use a near-"eternal" * timeout of 1 day if we do not have repeated message reduction turned on * (which it is not by default). This enables us to help safe the environment * by not unnecessarily awaking rsyslog on a regular tick (just think * powertop, for example). In that case, we primarily wait for a signal, * but a once-a-day wakeup should be quite acceptable. -- rgerhards, 2008-06-09 */ tvSelectTimeout.tv_sec = (bReduceRepeatMsgs == 1) ? TIMERINTVL : 86400 /*1 day*/; //tvSelectTimeout.tv_sec = TIMERINTVL; /* TODO: change this back to the above code when we have a better solution for apc */ tvSelectTimeout.tv_usec = 0; select(1, NULL, NULL, NULL, &tvSelectTimeout); if(bFinished) break; /* exit as quickly as possible - see long comment below */ /* If we received a HUP signal, we call doFlushRptdMsgs() a bit early. This * doesn't matter, because doFlushRptdMsgs() checks timestamps. What may happen, * however, is that the too-early call may lead to a bit too-late output * of "last message repeated n times" messages. But that is quite acceptable. * rgerhards, 2007-12-21 * ... and just to explain, we flush here because that is exactly what the mainloop * shall do - provide a periodic interval in which not-yet-flushed messages will * be flushed. Be careful, there is a potential race condition: doFlushRptdMsgs() * needs to aquire a lock on the action objects. If, however, long-running consumers * cause the main queue worker threads to lock them for a long time, we may receive * a starvation condition, resulting in the mainloop being held on lock for an extended * period of time. That, in turn, could lead to unresponsiveness to termination * requests. It is especially important that the bFinished flag is checked before * doFlushRptdMsgs() is called (I know because I ran into that situation). I am * not yet sure if the remaining probability window of a termination-related * problem is large enough to justify changing the code - I would consider it * extremely unlikely that the problem ever occurs in practice. Fixing it would * require not only a lot of effort but would cost considerable performance. So * for the time being, I think the remaining risk can be accepted. * rgerhards, 2008-01-10 */ if(bReduceRepeatMsgs == 1) doFlushRptdMsgs(); if(bHadHUP) { doHUP(); bHadHUP = 0; continue; } // TODO: remove execScheduled(); /* handle Apc calls (if any) */ } ENDfunc } /* load build-in modules * very first version begun on 2007-07-23 by rgerhards */ static rsRetVal loadBuildInModules(void) { DEFiRet; if((iRet = module.doModInit(modInitFile, UCHAR_CONSTANT("builtin-file"), NULL)) != RS_RET_OK) { RETiRet; } if((iRet = module.doModInit(modInitPipe, UCHAR_CONSTANT("builtin-pipe"), NULL)) != RS_RET_OK) { RETiRet; } #ifdef SYSLOG_INET if((iRet = module.doModInit(modInitFwd, UCHAR_CONSTANT("builtin-fwd"), NULL)) != RS_RET_OK) { RETiRet; } #endif if((iRet = module.doModInit(modInitShell, UCHAR_CONSTANT("builtin-shell"), NULL)) != RS_RET_OK) { RETiRet; } if((iRet = module.doModInit(modInitDiscard, UCHAR_CONSTANT("builtin-discard"), NULL)) != RS_RET_OK) { RETiRet; } /* dirty, but this must be for the time being: the usrmsg module must always be * loaded as last module. This is because it processes any type of action selector. * If we load it before other modules, these others will never have a chance of * working with the config file. We may change that implementation so that a user name * must start with an alnum, that would definitely help (but would it break backwards * compatibility?). * rgerhards, 2007-07-23 * User names now must begin with: * [a-zA-Z0-9_.] */ CHKiRet(module.doModInit(modInitUsrMsg, (uchar*) "builtin-usrmsg", NULL)); /* load build-in parser modules */ CHKiRet(module.doModInit(modInitpmrfc5424, UCHAR_CONSTANT("builtin-pmrfc5424"), NULL)); CHKiRet(module.doModInit(modInitpmrfc3164, UCHAR_CONSTANT("builtin-pmrfc3164"), NULL)); /* and set default parser modules (order is *very* important, legacy (3164) parse needs to go last! */ CHKiRet(parser.AddDfltParser(UCHAR_CONSTANT("rsyslog.rfc5424"))); CHKiRet(parser.AddDfltParser(UCHAR_CONSTANT("rsyslog.rfc3164"))); /* load build-in strgen modules */ CHKiRet(module.doModInit(modInitsmfile, UCHAR_CONSTANT("builtin-smfile"), NULL)); CHKiRet(module.doModInit(modInitsmtradfile, UCHAR_CONSTANT("builtin-smtradfile"), NULL)); CHKiRet(module.doModInit(modInitsmfwd, UCHAR_CONSTANT("builtin-smfwd"), NULL)); CHKiRet(module.doModInit(modInitsmtradfwd, UCHAR_CONSTANT("builtin-smtradfwd"), NULL)); /* ok, initialization of the command handler probably does not 100% belong right in * this space here. However, with the current design, this is actually quite a good * place to put it. We might decide to shuffle it around later, but for the time * being, the code has found its home here. A not-just-sideeffect of this decision * is that rsyslog will terminate if we can not register our built-in config commands. * This, I think, is the right thing to do. -- rgerhards, 2007-07-31 */ CHKiRet(regCfSysLineHdlr((uchar *)"logrsyslogstatusmessages", 0, eCmdHdlrBinary, NULL, &bLogStatusMsgs, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionresumeretrycount", 0, eCmdHdlrInt, NULL, &glbliActionResumeRetryCount, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"defaultruleset", 0, eCmdHdlrGetWord, setDefaultRuleset, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"ruleset", 0, eCmdHdlrGetWord, setCurrRuleset, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"sleep", 0, eCmdHdlrInt, putToSleep, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuefilename", 0, eCmdHdlrGetWord, NULL, &pszMainMsgQFName, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesize", 0, eCmdHdlrInt, NULL, &iMainMsgQueueSize, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuehighwatermark", 0, eCmdHdlrInt, NULL, &iMainMsgQHighWtrMark, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuelowwatermark", 0, eCmdHdlrInt, NULL, &iMainMsgQLowWtrMark, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuediscardmark", 0, eCmdHdlrInt, NULL, &iMainMsgQDiscardMark, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuediscardseverity", 0, eCmdHdlrSeverity, NULL, &iMainMsgQDiscardSeverity, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuecheckpointinterval", 0, eCmdHdlrInt, NULL, &iMainMsgQPersistUpdCnt, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesyncqueuefiles", 0, eCmdHdlrBinary, NULL, &bMainMsgQSyncQeueFiles, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetype", 0, eCmdHdlrGetWord, setMainMsgQueType, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueueworkerthreads", 0, eCmdHdlrInt, NULL, &iMainMsgQueueNumWorkers, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetimeoutshutdown", 0, eCmdHdlrInt, NULL, &iMainMsgQtoQShutdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetimeoutactioncompletion", 0, eCmdHdlrInt, NULL, &iMainMsgQtoActShutdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetimeoutenqueue", 0, eCmdHdlrInt, NULL, &iMainMsgQtoEnq, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueueworkertimeoutthreadshutdown", 0, eCmdHdlrInt, NULL, &iMainMsgQtoWrkShutdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeueslowdown", 0, eCmdHdlrInt, NULL, &iMainMsgQDeqSlowdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueueworkerthreadminimummessages", 0, eCmdHdlrInt, NULL, &iMainMsgQWrkMinMsgs, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuemaxfilesize", 0, eCmdHdlrSize, NULL, &iMainMsgQueMaxFileSize, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuebatchsize", 0, eCmdHdlrSize, NULL, &iMainMsgQueDeqBatchSize, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuemaxdiskspace", 0, eCmdHdlrSize, NULL, &iMainMsgQueMaxDiskSpace, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesaveonshutdown", 0, eCmdHdlrBinary, NULL, &bMainMsgQSaveOnShutdown, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuetimebegin", 0, eCmdHdlrInt, NULL, &iMainMsgQueueDeqtWinFromHr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuetimeend", 0, eCmdHdlrInt, NULL, &iMainMsgQueueDeqtWinToHr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"abortonuncleanconfig", 0, eCmdHdlrBinary, NULL, &bAbortOnUncleanConfig, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"repeatedmsgreduction", 0, eCmdHdlrBinary, NULL, &bReduceRepeatMsgs, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionexeconlywhenpreviousissuspended", 0, eCmdHdlrBinary, NULL, &bActExecWhenPrevSusp, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionresumeinterval", 0, eCmdHdlrInt, setActionResumeInterval, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"template", 0, eCmdHdlrCustomHandler, conf.doNameLine, (void*)DIR_TEMPLATE, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"outchannel", 0, eCmdHdlrCustomHandler, conf.doNameLine, (void*)DIR_OUTCHANNEL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"allowedsender", 0, eCmdHdlrCustomHandler, conf.doNameLine, (void*)DIR_ALLOWEDSENDER, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"modload", 0, eCmdHdlrCustomHandler, conf.doModLoad, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"includeconfig", 0, eCmdHdlrCustomHandler, conf.doIncludeLine, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"umask", 0, eCmdHdlrFileCreateMode, setUmask, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"maxopenfiles", 0, eCmdHdlrInt, setMaxFiles, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"debugprinttemplatelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintTemplateList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"debugprintmodulelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintModuleList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"debugprintcfsyslinehandlerlist", 0, eCmdHdlrBinary, NULL, &bDebugPrintCfSysLineHandlerList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"moddir", 0, eCmdHdlrGetWord, NULL, &pModDir, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"generateconfiggraph", 0, eCmdHdlrGetWord, NULL, &pszConfDAGFile, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"errormessagestostderr", 0, eCmdHdlrBinary, NULL, &bErrMsgToStderr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"maxmessagesize", 0, eCmdHdlrSize, setMaxMsgSize, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"privdroptouser", 0, eCmdHdlrUID, NULL, &uidDropPriv, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"privdroptouserid", 0, eCmdHdlrInt, NULL, &uidDropPriv, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"privdroptogroup", 0, eCmdHdlrGID, NULL, &gidDropPriv, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"privdroptogroupid", 0, eCmdHdlrGID, NULL, &gidDropPriv, NULL)); finalize_it: RETiRet; } /* print version and compile-time setting information. */ static void printVersion(void) { printf("rsyslogd %s, ", VERSION); printf("compiled with:\n"); #ifdef FEATURE_REGEXP printf("\tFEATURE_REGEXP:\t\t\t\tYes\n"); #else printf("\tFEATURE_REGEXP:\t\t\t\tNo\n"); #endif #if defined(_LARGE_FILES) || (defined (_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS >= 64) printf("\tFEATURE_LARGEFILE:\t\t\tYes\n"); #else printf("\tFEATURE_LARGEFILE:\t\t\tNo\n"); #endif #if defined(SYSLOG_INET) && defined(USE_GSSAPI) printf("\tGSSAPI Kerberos 5 support:\t\tYes\n"); #else printf("\tGSSAPI Kerberos 5 support:\t\tNo\n"); #endif #ifndef NDEBUG printf("\tFEATURE_DEBUG (debug build, slow code):\tYes\n"); #else printf("\tFEATURE_DEBUG (debug build, slow code):\tNo\n"); #endif #ifdef HAVE_ATOMIC_BUILTINS printf("\t32bit Atomic operations supported:\tYes\n"); #else printf("\t32bit Atomic operations supported:\tNo\n"); #endif #ifdef HAVE_ATOMIC_BUILTINS64 printf("\t64bit Atomic operations supported:\tYes\n"); #else printf("\t64bit Atomic operations supported:\tNo\n"); #endif #ifdef RTINST printf("\tRuntime Instrumentation (slow code):\tYes\n"); #else printf("\tRuntime Instrumentation (slow code):\tNo\n"); #endif printf("\nSee http://www.rsyslog.com for more information.\n"); } /* This function is called after initial initalization. It is used to * move code out of the too-long main() function. * rgerhards, 2007-10-17 */ static rsRetVal mainThread() { DEFiRet; uchar *pTmp; /* initialize the build-in templates */ pTmp = template_DebugFormat; tplAddLine("RSYSLOG_DebugFormat", &pTmp); pTmp = template_SyslogProtocol23Format; tplAddLine("RSYSLOG_SyslogProtocol23Format", &pTmp); pTmp = template_FileFormat; /* new format for files with high-precision stamp */ tplAddLine("RSYSLOG_FileFormat", &pTmp); pTmp = template_TraditionalFileFormat; tplAddLine("RSYSLOG_TraditionalFileFormat", &pTmp); pTmp = template_WallFmt; tplAddLine(" WallFmt", &pTmp); pTmp = template_ForwardFormat; tplAddLine("RSYSLOG_ForwardFormat", &pTmp); pTmp = template_TraditionalForwardFormat; tplAddLine("RSYSLOG_TraditionalForwardFormat", &pTmp); pTmp = template_StdUsrMsgFmt; tplAddLine(" StdUsrMsgFmt", &pTmp); pTmp = template_StdDBFmt; tplAddLine(" StdDBFmt", &pTmp); pTmp = template_StdPgSQLFmt; tplAddLine(" StdPgSQLFmt", &pTmp); pTmp = template_spoofadr; tplLastStaticInit(tplAddLine("RSYSLOG_omudpspoofDfltSourceTpl", &pTmp)); CHKiRet(init()); if(Debug && debugging_on) { DBGPRINTF("Debugging enabled, SIGUSR1 to turn off debugging.\n"); } /* Send a signal to the parent so it can terminate. */ if(myPid != ppid) kill(ppid, SIGTERM); /* If instructed to do so, we now drop privileges. Note that this is not 100% secure, * because outputs are already running at this time. However, we can implement * dropping of privileges rather quickly and it will work in many cases. While it is not * the ultimate solution, the current one is still much better than not being able to * drop privileges at all. Doing it correctly, requires a change in architecture, which * we should do over time. TODO -- rgerhards, 2008-11-19 */ if(gidDropPriv != 0) { doDropPrivGid(gidDropPriv); } if(uidDropPriv != 0) { doDropPrivUid(uidDropPriv); } /* finally let the inputs run... */ runInputModules(); /* END OF INTIALIZATION */ DBGPRINTF("initialization completed, transitioning to regular run mode\n"); /* close stderr and stdout if they are kept open during a fork. Note that this * may introduce subtle security issues: if we are in a jail, one may break out of * it via these descriptors. But if I close them earlier, error messages will (once * again) not be emitted to the user that starts the daemon. As root jail support * is still in its infancy (and not really done), we currently accept this issue. * rgerhards, 2009-06-29 */ if(!(Debug == DEBUG_FULL || NoFork)) { close(1); close(2); bErrMsgToStderr = 0; } mainloop(); finalize_it: RETiRet; } /* Method to initialize all global classes and use the objects that we need. * rgerhards, 2008-01-04 * rgerhards, 2008-04-16: the actual initialization is now carried out by the runtime */ static rsRetVal InitGlobalClasses(void) { DEFiRet; char *pErrObj; /* tells us which object failed if that happens (useful for troubleshooting!) */ /* Intialize the runtime system */ pErrObj = "rsyslog runtime"; /* set in case the runtime errors before setting an object */ CHKiRet(rsrtInit(&pErrObj, &obj)); CHKiRet(rsrtSetErrLogger(submitErrMsg)); /* set out error handler */ /* Now tell the system which classes we need ourselfs */ pErrObj = "glbl"; CHKiRet(objUse(glbl, CORE_COMPONENT)); pErrObj = "errmsg"; CHKiRet(objUse(errmsg, CORE_COMPONENT)); pErrObj = "module"; CHKiRet(objUse(module, CORE_COMPONENT)); pErrObj = "datetime"; CHKiRet(objUse(datetime, CORE_COMPONENT)); pErrObj = "expr"; CHKiRet(objUse(expr, CORE_COMPONENT)); pErrObj = "rule"; CHKiRet(objUse(rule, CORE_COMPONENT)); pErrObj = "ruleset"; CHKiRet(objUse(ruleset, CORE_COMPONENT)); pErrObj = "conf"; CHKiRet(objUse(conf, CORE_COMPONENT)); pErrObj = "prop"; CHKiRet(objUse(prop, CORE_COMPONENT)); pErrObj = "parser"; CHKiRet(objUse(parser, CORE_COMPONENT)); /* intialize some dummy classes that are not part of the runtime */ pErrObj = "action"; CHKiRet(actionClassInit()); pErrObj = "template"; CHKiRet(templateInit()); /* TODO: the dependency on net shall go away! -- rgerhards, 2008-03-07 */ pErrObj = "net"; CHKiRet(objUse(net, LM_NET_FILENAME)); finalize_it: if(iRet != RS_RET_OK) { /* we know we are inside the init sequence, so we can safely emit * messages to stderr. -- rgerhards, 2008-04-02 */ fprintf(stderr, "Error during class init for object '%s' - failing...\n", pErrObj); } RETiRet; } /* Method to exit all global classes. We do not do any error checking here, * because that wouldn't help us at all. So better try to deinit blindly * as much as succeeds (which usually means everything will). We just must * be careful to do the de-init in the opposite order of the init, because * of the dependencies. However, its not as important this time, because * we have reference counting. * rgerhards, 2008-03-10 */ static rsRetVal GlobalClassExit(void) { DEFiRet; /* first, release everything we used ourself */ objRelease(net, LM_NET_FILENAME);/* TODO: the dependency on net shall go away! -- rgerhards, 2008-03-07 */ objRelease(prop, CORE_COMPONENT); objRelease(conf, CORE_COMPONENT); objRelease(ruleset, CORE_COMPONENT); objRelease(rule, CORE_COMPONENT); objRelease(expr, CORE_COMPONENT); vmClassExit(); /* this is hack, currently core_modules do not get this automatically called */ parserClassExit(); /* this is hack, currently core_modules do not get this automatically called */ objRelease(datetime, CORE_COMPONENT); /* TODO: implement the rest of the deinit */ /* dummy "classes */ strExit(); #if 0 CHKiRet(objGetObjInterface(&obj)); /* this provides the root pointer for all other queries */ /* the following classes were intialized by objClassInit() */ CHKiRet(objUse(errmsg, CORE_COMPONENT)); CHKiRet(objUse(module, CORE_COMPONENT)); #endif rsrtExit(); /* *THIS* *MUST/SHOULD?* always be the first class initilizer being called (except debug)! */ RETiRet; } /* some support for command line option parsing. Any non-trivial options must be * buffered until the complete command line has been parsed. This is necessary to * prevent dependencies between the options. That, in turn, means we need to have * something that is capable of buffering options and there values. The follwing * functions handle that. * rgerhards, 2008-04-04 */ typedef struct bufOpt { struct bufOpt *pNext; char optchar; char *arg; } bufOpt_t; static bufOpt_t *bufOptRoot = NULL; static bufOpt_t *bufOptLast = NULL; /* add option buffer */ static rsRetVal bufOptAdd(char opt, char *arg) { DEFiRet; bufOpt_t *pBuf; if((pBuf = MALLOC(sizeof(bufOpt_t))) == NULL) ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); pBuf->optchar = opt; pBuf->arg = arg; pBuf->pNext = NULL; if(bufOptLast == NULL) { bufOptRoot = pBuf; /* then there is also no root! */ } else { bufOptLast->pNext = pBuf; } bufOptLast = pBuf; finalize_it: RETiRet; } /* remove option buffer from top of list, return values and destruct buffer itself. * returns RS_RET_END_OF_LINKEDLIST when no more options are present. * (we use int *opt instead of char *opt to keep consistent with getopt()) */ static rsRetVal bufOptRemove(int *opt, char **arg) { DEFiRet; bufOpt_t *pBuf; if(bufOptRoot == NULL) ABORT_FINALIZE(RS_RET_END_OF_LINKEDLIST); pBuf = bufOptRoot; *opt = pBuf->optchar; *arg = pBuf->arg; bufOptRoot = pBuf->pNext; free(pBuf); finalize_it: RETiRet; } /* global initialization, to be done only once and before the mainloop is started. * rgerhards, 2008-07-28 (extracted from realMain()) */ static rsRetVal doGlblProcessInit(void) { struct sigaction sigAct; int num_fds; int i; DEFiRet; thrdInit(); if( !(Debug == DEBUG_FULL || NoFork) ) { DBGPRINTF("Checking pidfile.\n"); if (!check_pid(PidFile)) { memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = doexit; sigaction(SIGTERM, &sigAct, NULL); if (fork()) { /* Parent process */ sleep(300); /* Not reached unless something major went wrong. 5 * minutes should be a fair amount of time to wait. * Please note that this procedure is important since * the father must not exit before syslogd isn't * initialized or the klogd won't be able to flush its * logs. -Joey */ exit(1); /* "good" exit - after forking, not diasabling anything */ } num_fds = getdtablesize(); close(0); /* we keep stdout and stderr open in case we have to emit something */ i = 3; /* if (sd_booted()) */ { const char *e; char buf[24] = { '\0' }; char *p = NULL; unsigned long l; int sd_fds; /* fork & systemd socket activation: * fetch listen pid and update to ours, * when it is set to pid of our parent. */ if ( (e = getenv("LISTEN_PID"))) { errno = 0; l = strtoul(e, &p, 10); if (errno == 0 && l > 0 && (!p || !*p)) { if (getppid() == (pid_t)l) { snprintf(buf, sizeof(buf), "%d", getpid()); setenv("LISTEN_PID", buf, 1); } } } /* * close only all further fds, except * of the fds provided by systemd. */ sd_fds = sd_listen_fds(0); if (sd_fds > 0) i = SD_LISTEN_FDS_START + sd_fds; } for ( ; i < num_fds; i++) (void) close(i); untty(); } else { fputs(" Already running. If you want to run multiple instances, you need " "to specify different pid files (use -i option)\n", stderr); exit(1); /* "good" exit, done if syslogd is already running */ } } /* tuck my process id away */ DBGPRINTF("Writing pidfile %s.\n", PidFile); if (!check_pid(PidFile)) { if (!write_pid(PidFile)) { fputs("Can't write pid.\n", stderr); exit(1); /* exit during startup - questionable */ } } else { fputs("Pidfile (and pid) already exist.\n", stderr); exit(1); /* exit during startup - questionable */ } myPid = getpid(); /* save our pid for further testing (also used for messages) */ memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = sigsegvHdlr; sigaction(SIGSEGV, &sigAct, NULL); sigAct.sa_handler = sigsegvHdlr; sigaction(SIGABRT, &sigAct, NULL); sigAct.sa_handler = doDie; sigaction(SIGTERM, &sigAct, NULL); sigAct.sa_handler = Debug ? doDie : SIG_IGN; sigaction(SIGINT, &sigAct, NULL); sigaction(SIGQUIT, &sigAct, NULL); sigAct.sa_handler = reapchild; sigaction(SIGCHLD, &sigAct, NULL); sigAct.sa_handler = Debug ? debug_switch : SIG_IGN; sigaction(SIGUSR1, &sigAct, NULL); sigAct.sa_handler = sigttin_handler; sigaction(SIGTTIN, &sigAct, NULL); /* (ab)used to interrupt input threads */ sigAct.sa_handler = SIG_IGN; sigaction(SIGPIPE, &sigAct, NULL); sigaction(SIGXFSZ, &sigAct, NULL); /* do not abort if 2gig file limit is hit */ RETiRet; } /* This is the main entry point into rsyslogd. Over time, we should try to * modularize it a bit more... */ int realMain(int argc, char **argv) { DEFiRet; register uchar *p; int ch; struct hostent *hent; extern int optind; extern char *optarg; int bEOptionWasGiven = 0; int bImUxSockLoaded = 0; /* already generated a $ModLoad imuxsock? */ int iHelperUOpt; int bChDirRoot = 1; /* change the current working directory to "/"? */ char *arg; /* for command line option processing */ uchar legacyConfLine[80]; uchar *LocalHostName; uchar *LocalDomain; uchar *LocalFQDNName; char cwdbuf[128]; /* buffer to obtain/display current working directory */ /* first, parse the command line options. We do not carry out any actual work, just * see what we should do. This relieves us from certain anomalies and we can process * the parameters down below in the correct order. For example, we must know the * value of -M before we can do the init, but at the same time we need to have * the base classes init before we can process most of the options. Now, with the * split of functionality, this is no longer a problem. Thanks to varmofekoj for * suggesting this algo. * Note: where we just need to set some flags and can do so without knowledge * of other options, we do this during the inital option processing. With later * versions (if a dependency on -c option is introduced), we must move that code * to other places, but I think it is quite appropriate and saves code to do this * only when actually neeeded. * rgerhards, 2008-04-04 */ while((ch = getopt(argc, argv, "46a:Ac:def:g:hi:l:m:M:nN:op:qQr::s:t:T:u:vwx")) != EOF) { switch((char)ch) { case '4': case '6': case 'A': case 'a': case 'f': /* configuration file */ case 'h': case 'i': /* pid file name */ case 'l': case 'm': /* mark interval */ case 'n': /* don't fork */ case 'N': /* enable config verify mode */ case 'o': case 'p': case 'q': /* add hostname if DNS resolving has failed */ case 'Q': /* dont resolve hostnames in ACL to IPs */ case 's': case 'T': /* chroot on startup (primarily for testing) */ case 'u': /* misc user settings */ case 'w': /* disable disallowed host warnings */ case 'x': /* disable dns for remote messages */ CHKiRet(bufOptAdd(ch, optarg)); break; case 'c': /* compatibility mode */ iCompatibilityMode = atoi(optarg); break; case 'd': /* debug - must be handled now, so that debug is active during init! */ debugging_on = 1; Debug = 1; break; case 'e': /* log every message (no repeat message supression) */ fprintf(stderr, "note: -e option is no longer supported, every message is now logged by default\n"); bEOptionWasGiven = 1; break; case 'g': /* enable tcp gssapi logging */ #if defined(SYSLOG_INET) && defined(USE_GSSAPI) CHKiRet(bufOptAdd('g', optarg)); #else fprintf(stderr, "rsyslogd: -g not valid - not compiled with gssapi support"); #endif break; case 'M': /* default module load path -- this MUST be carried out immediately! */ glblModPath = (uchar*) optarg; break; case 'r': /* accept remote messages */ #ifdef SYSLOG_INET CHKiRet(bufOptAdd(ch, optarg)); #else fprintf(stderr, "rsyslogd: -r not valid - not compiled with network support\n"); #endif break; case 't': /* enable tcp logging */ #ifdef SYSLOG_INET CHKiRet(bufOptAdd(ch, optarg)); #else fprintf(stderr, "rsyslogd: -t not valid - not compiled with network support\n"); #endif break; case 'v': /* MUST be carried out immediately! */ printVersion(); exit(0); /* exit for -v option - so this is a "good one" */ case '?': default: usage(); } } if(argc - optind) usage(); DBGPRINTF("rsyslogd %s startup, compatibility mode %d, module path '%s', cwd:%s\n", VERSION, iCompatibilityMode, glblModPath == NULL ? "" : (char*)glblModPath, getcwd(cwdbuf, sizeof(cwdbuf))); /* we are done with the initial option parsing and processing. Now we init the system. */ ppid = getpid(); CHKiRet_Hdlr(InitGlobalClasses()) { fprintf(stderr, "rsyslogd initializiation failed - global classes could not be initialized.\n" "Did you do a \"make install\"?\n" "Suggested action: run rsyslogd with -d -n options to see what exactly " "fails.\n"); FINALIZE; } /* doing some core initializations */ /* we need to create the inputName property (only once during our lifetime) */ CHKiRet(prop.Construct(&pInternalInputName)); CHKiRet(prop.SetString(pInternalInputName, UCHAR_CONSTANT("rsyslogd"), sizeof("rsyslgod") - 1)); CHKiRet(prop.ConstructFinalize(pInternalInputName)); CHKiRet(prop.Construct(&pLocalHostIP)); CHKiRet(prop.SetString(pLocalHostIP, UCHAR_CONSTANT("127.0.0.1"), sizeof("127.0.0.1") - 1)); CHKiRet(prop.ConstructFinalize(pLocalHostIP)); /* get our host and domain names - we need to do this early as we may emit * error log messages, which need the correct hostname. -- rgerhards, 2008-04-04 */ net.getLocalHostname(&LocalFQDNName); CHKmalloc(LocalHostName = (uchar*) strdup((char*)LocalFQDNName)); glbl.SetLocalFQDNName(LocalFQDNName); /* set the FQDN before we modify it */ if((p = (uchar*)strchr((char*)LocalHostName, '.'))) { *p++ = '\0'; LocalDomain = p; } else { LocalDomain = (uchar*)""; /* It's not clearly defined whether gethostname() * should return the simple hostname or the fqdn. A * good piece of software should be aware of both and * we want to distribute good software. Joey * * Good software also always checks its return values... * If syslogd starts up before DNS is up & /etc/hosts * doesn't have LocalHostName listed, gethostbyname will * return NULL. */ /* TODO: gethostbyname() is not thread-safe, but replacing it is * not urgent as we do not run on multiple threads here. rgerhards, 2007-09-25 */ hent = gethostbyname((char*)LocalHostName); if(hent) { free(LocalHostName); CHKmalloc(LocalHostName = (uchar*)strdup(hent->h_name)); if((p = (uchar*)strchr((char*)LocalHostName, '.'))) { *p++ = '\0'; LocalDomain = p; } } } /* Convert to lower case to recognize the correct domain laterly */ for(p = LocalDomain ; *p ; p++) *p = (char)tolower((int)*p); /* we now have our hostname and can set it inside the global vars. * TODO: think if all of this would better be a runtime function * rgerhards, 2008-04-17 */ glbl.SetLocalHostName(LocalHostName); glbl.SetLocalDomain(LocalDomain); glbl.GenerateLocalHostNameProperty(); /* must be redone after conf processing, FQDN setting may have changed */ /* initialize the objects */ if((iRet = modInitIminternal()) != RS_RET_OK) { fprintf(stderr, "fatal error: could not initialize errbuf object (error code %d).\n", iRet); exit(1); /* "good" exit, leaving at init for fatal error */ } if((iRet = loadBuildInModules()) != RS_RET_OK) { fprintf(stderr, "fatal error: could not activate built-in modules. Error code %d.\n", iRet); exit(1); /* "good" exit, leaving at init for fatal error */ } /* END core initializations - we now come back to carrying out command line options*/ while((iRet = bufOptRemove(&ch, &arg)) == RS_RET_OK) { DBGPRINTF("deque option %c, optarg '%s'\n", ch, (arg == NULL) ? "" : arg); switch((char)ch) { case '4': glbl.SetDefPFFamily(PF_INET); break; case '6': glbl.SetDefPFFamily(PF_INET6); break; case 'A': send_to_all++; break; case 'a': if(iCompatibilityMode < 3) { if(!bImUxSockLoaded) { legacyOptsEnq((uchar *) "ModLoad imuxsock"); bImUxSockLoaded = 1; } snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "addunixlistensocket %s", arg); legacyOptsEnq(legacyConfLine); } else { fprintf(stderr, "error -a is no longer supported, use module imuxsock instead"); } break; case 'f': /* configuration file */ ConfFile = (uchar*) arg; break; case 'g': /* enable tcp gssapi logging */ if(iCompatibilityMode < 3) { legacyOptsParseTCP(ch, arg); } else fprintf(stderr, "-g option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 'h': if(iCompatibilityMode < 3) { errmsg.LogError(0, NO_ERRCODE, "WARNING: -h option is no longer supported - ignored"); } else { usage(); /* for v3 and above, it simply is an error */ } break; case 'i': /* pid file name */ PidFile = arg; break; case 'l': if(glbl.GetLocalHosts() != NULL) { fprintf (stderr, "rsyslogd: Only one -l argument allowed, the first one is taken.\n"); } else { glbl.SetLocalHosts(crunch_list(arg)); } break; case 'm': /* mark interval */ if(iCompatibilityMode < 3) { MarkInterval = atoi(arg) * 60; } else fprintf(stderr, "-m option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 'n': /* don't fork */ NoFork = 1; break; case 'N': /* enable config verify mode */ iConfigVerify = atoi(arg); break; case 'o': if(iCompatibilityMode < 3) { if(!bImUxSockLoaded) { legacyOptsEnq((uchar *) "ModLoad imuxsock"); bImUxSockLoaded = 1; } legacyOptsEnq((uchar *) "OmitLocalLogging"); } else { fprintf(stderr, "error -o is no longer supported, use module imuxsock instead"); } break; case 'p': if(iCompatibilityMode < 3) { if(!bImUxSockLoaded) { legacyOptsEnq((uchar *) "ModLoad imuxsock"); bImUxSockLoaded = 1; } snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "SystemLogSocketName %s", arg); legacyOptsEnq(legacyConfLine); } else { fprintf(stderr, "error -p is no longer supported, use module imuxsock instead"); } break; case 'q': /* add hostname if DNS resolving has failed */ *(net.pACLAddHostnameOnFail) = 1; break; case 'Q': /* dont resolve hostnames in ACL to IPs */ *(net.pACLDontResolve) = 1; break; case 'r': /* accept remote messages */ if(iCompatibilityMode < 3) { legacyOptsEnq((uchar *) "ModLoad imudp"); snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "UDPServerRun %s", arg); legacyOptsEnq(legacyConfLine); } else fprintf(stderr, "-r option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 's': if(glbl.GetStripDomains() != NULL) { fprintf (stderr, "rsyslogd: Only one -s argument allowed, the first one is taken.\n"); } else { glbl.SetStripDomains(crunch_list(arg)); } break; case 't': /* enable tcp logging */ if(iCompatibilityMode < 3) { legacyOptsParseTCP(ch, arg); } else fprintf(stderr, "-t option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 'T':/* chroot() immediately at program startup, but only for testing, NOT security yet */ if(chroot(arg) != 0) { perror("chroot"); exit(1); } break; case 'u': /* misc user settings */ iHelperUOpt = atoi(arg); if(iHelperUOpt & 0x01) glbl.SetParseHOSTNAMEandTAG(0); if(iHelperUOpt & 0x02) bChDirRoot = 0; break; case 'w': /* disable disallowed host warnigs */ glbl.SetOption_DisallowWarning(0); break; case 'x': /* disable dns for remote messages */ glbl.SetDisableDNS(1); break; case '?': default: usage(); } } if(iRet != RS_RET_END_OF_LINKEDLIST) FINALIZE; if(iConfigVerify) { fprintf(stderr, "rsyslogd: version %s, config validation run (level %d), master config %s\n", VERSION, iConfigVerify, ConfFile); } if(bChDirRoot) { if(chdir("/") != 0) fprintf(stderr, "Can not do 'cd /' - still trying to run\n"); } /* process compatibility mode settings */ if(iCompatibilityMode < 4) { errmsg.LogError(0, NO_ERRCODE, "WARNING: rsyslogd is running in compatibility mode. Automatically " "generated config directives may interfer with your rsyslog.conf settings. " "We suggest upgrading your config and adding -c5 as the first " "rsyslogd option."); } if(iCompatibilityMode < 3) { if(MarkInterval > 0) { legacyOptsEnq((uchar *) "ModLoad immark"); snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "MarkMessagePeriod %d", MarkInterval); legacyOptsEnq(legacyConfLine); } if(!bImUxSockLoaded) { legacyOptsEnq((uchar *) "ModLoad imuxsock"); } } if(bEOptionWasGiven && iCompatibilityMode < 3) { errmsg.LogError(0, NO_ERRCODE, "WARNING: \"message repeated n times\" feature MUST be turned on in " "rsyslog.conf - CURRENTLY EVERY MESSAGE WILL BE LOGGED. Visit " "http://www.rsyslog.com/rptdmsgreduction to learn " "more and cast your vote if you want us to keep this feature."); } if(!iConfigVerify) CHKiRet(doGlblProcessInit()); CHKiRet(mainThread()); /* do any de-init's that need to be done AFTER this comment */ die(bFinished); thrdExit(); finalize_it: if(iRet == RS_RET_VALIDATION_RUN) { fprintf(stderr, "rsyslogd: End of config validation run. Bye.\n"); } else if(iRet != RS_RET_OK) { fprintf(stderr, "rsyslogd run failed with error %d (see rsyslog.h " "or try http://www.rsyslog.com/e/%d to learn what that number means)\n", iRet, iRet*-1); } ENDfunc return 0; } /* This is the main entry point into rsyslogd. This must be a function in its own * right in order to intialize the debug system in a portable way (otherwise we would * need to have a statement before variable definitions. * rgerhards, 20080-01-28 */ int main(int argc, char **argv) { dbgClassInit(); return realMain(argc, argv); } /* vim:set ai: */