/** * \brief This is the main file of the rsyslogd daemon. * * TODO: * - include a global option for control character replacemet on receive? (not just NUL) * * Please visit the rsyslog project at * * http://www.rsyslog.com * * to learn more about it and discuss any questions you may have. * * Please note that as of now, a lot of the code in this file stems * from the sysklogd project. To learn more over this project, please * visit * * http://www.infodrom.org/projects/sysklogd/ * * I would like to express my thanks to the developers of the sysklogd * package - without it, I would have had a much harder start... * * Please note that I made quite some changes to the orignal package. * I expect to do even more changes - up * to a full rewrite - to meet my design goals, which among others * contain a (at least) dual-thread design with a memory buffer for * storing received bursts of data. This is also the reason why I * kind of "forked" a completely new branch of the package. My intension * is to do many changes and only this initial release will look * similar to sysklogd (well, one never knows...). * * As I have made a lot of modifications, please assume that all bugs * in this package are mine and not those of the sysklogd team. * * As of this writing, there already exist heavy * modifications to the orginal sysklogd package. I suggest to no * longer rely too much on code knowledge you eventually have with * sysklogd - rgerhards 2005-07-05 * The code is now almost completely different. Be careful! * rgerhards, 2006-11-30 * * I have decided to put my code under the GPL. The sysklog package * is distributed under the BSD license. As such, this package here * currently comes with two licenses. Both are given below. As it is * probably hard for you to see what was part of the sysklogd package * and what is part of my code, I suggest that you visit the * sysklogd site on the URL above if you would like to base your * development on a version that is not under the GPL. * * This Project was intiated and is maintained by * Rainer Gerhards . See * AUTHORS to learn who helped make it become a reality. * * If you have questions about rsyslogd in general, please email * info@adiscon.com. To learn more about rsyslogd, please visit * http://www.rsyslog.com. * * \author Rainer Gerhards * \date 2003-10-17 * Some initial modifications on the sysklogd package to support * liblogging. These have actually not yet been merged to the * source you see currently (but they hopefully will) * * \date 2004-10-28 * Restarted the modifications of sysklogd. This time, we * focus on a simpler approach first. The initial goal is to * provide MySQL database support (so that syslogd can log * to the database). * * rsyslog - An Enhanced syslogd Replacement. * Copyright 2003-2007 Rainer Gerhards and Adiscon GmbH. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * A copy of the GPL can be found in the file "COPYING" in this distribution. */ #include "config.h" #ifdef __FreeBSD__ #define BSD #endif #define _GNU_SOURCE /* change the following setting to e.g. 32768 if you would like to * support large message sizes for IHE (32k is the current maximum * needed for IHE). I was initially tempted to increase it to 32k, * but there is a large memory footprint with the current * implementation in rsyslog. This will change as the processing * changes, but I have re-set it to 1k, because the vast majority * of messages is below that and the memory savings is huge, at * least compared to the overall memory footprint. * * If you intend to receive Windows Event Log data (e.g. via * EventReporter - www.eventreporter.com), you might want to * increase this number to an even higher value, as event * log messages can be very lengthy. * rgerhards, 2005-07-05 * * during my recent testing, it showed that 4k seems to be * the typical maximum for UDP based syslog. This is a IP stack * restriction. Not always ... but very often. If you go beyond * that value, be sure to test that rsyslogd actually does what * you think it should do ;) Also, it is a good idea to check the * doc set for anything on IHE - it most probably has information on * message sizes. * rgerhards, 2005-08-05 * * I have increased the default message size to 2048 to be in sync * with recent IETF syslog standardization efforts. * rgerhards, 2006-11-30 * * I have removed syslogdPanic(). That function was supposed to be used * for logging in low-memory conditons. Ever since it was introduced, it * was a wrapper for dprintf(). A more intelligent choice was hard to * find. After all, if we are short on memory, doing anything fance will * again cause memory problems. I have now modified the code so that * those elements for which we do not get memory are simply discarded. * That might be a single property like the TAG, but it might also be * a complete message. The overall goal of this code change is to keep * rsyslogd up and running, while we sacrifice some messages to reach * that goal. It also keeps the code cleaner. A real out of memory * condition is highly unlikely. If it happens, there will probably be * much more trouble on the system in question. Anyhow - rsyslogd will * most probably be able to survive it and carry on with processing * once the situation has been resolved. */ #define MAXLINE 2048 /* maximum line length */ #define DEFUPRI (LOG_USER|LOG_NOTICE) #define DEFSPRI (LOG_KERN|LOG_CRIT) #define TIMERINTVL 30 /* interval for checking flush, mark */ #define CONT_LINE 1 /* Allow continuation lines */ #ifdef MTRACE #include #endif #include #include #include #include #include #define GNU_SOURCE #include #include #include #include #define SYSLOG_NAMES #include #include #ifdef __sun #include #else #include #endif #include #include #include #include #include #if HAVE_FCNTL_H #include #else #include #endif #include #include #include #include #include #include #include #ifndef __sun #endif #include #include #include #ifndef TESTING #include "pidfile.h" #endif #include #ifdef WITH_DB #include "mysql/mysql.h" #include "mysql/errmsg.h" #endif #if HAVE_PATHS_H #include #endif #ifdef USE_NETZIP #include /* config param: minimum message size to try compression. The smaller * the message, the less likely is any compression gain. We check for * gain before we submit the message. But to do so we still need to * do the (costly) compress() call. The following setting sets a size * for which no call to compress() is done at all. This may result in * a few more bytes being transmited but better overall performance. * Note: I have not yet checked the minimum UDP packet size. It might be * that we do not save anything by compressing very small messages, because * UDP might need to pad ;) * rgerhards, 2006-11-30 */ #define MIN_SIZE_FOR_COMPRESS 60 #endif /* handle some defines missing on more than one platform */ #ifndef SUN_LEN #define SUN_LEN(su) \ (sizeof(*(su)) - sizeof((su)->sun_path) + strlen((su)->sun_path)) #endif /* missing definitions for solaris * 2006-02-16 Rger */ #ifdef __sun #define LOG_AUTHPRIV LOG_AUTH #define LOG_MAKEPRI(fac, pri) (((fac) << 3) | (pri)) #define LOG_PRI(p) ((p) & LOG_PRIMASK) #define LOG_FAC(p) (((p) & LOG_FACMASK) >> 3) #define INTERNAL_NOPRI 0x10 /* the "no priority" priority */ #define LOG_FTP (11<<3) /* ftp daemon */ #define INTERNAL_MARK LOG_MAKEPRI((LOG_NFACILITIES<<3), 0) typedef struct _code { char *c_name; int c_val; } CODE; CODE prioritynames[] = { { "alert", LOG_ALERT }, { "crit", LOG_CRIT }, { "debug", LOG_DEBUG }, { "emerg", LOG_EMERG }, { "err", LOG_ERR }, { "error", LOG_ERR }, /* DEPRECATED */ { "info", LOG_INFO }, { "none", INTERNAL_NOPRI }, /* INTERNAL */ { "notice", LOG_NOTICE }, { "panic", LOG_EMERG }, /* DEPRECATED */ { "warn", LOG_WARNING }, /* DEPRECATED */ { "warning", LOG_WARNING }, { NULL, -1 } }; CODE facilitynames[] = { { "auth", LOG_AUTH }, { "authpriv", LOG_AUTHPRIV }, { "cron", LOG_CRON }, { "daemon", LOG_DAEMON }, { "ftp", LOG_FTP }, { "kern", LOG_KERN }, { "lpr", LOG_LPR }, { "mail", LOG_MAIL }, { "mark", INTERNAL_MARK }, /* INTERNAL */ { "news", LOG_NEWS }, { "security", LOG_AUTH }, /* DEPRECATED */ { "syslog", LOG_SYSLOG }, { "user", LOG_USER }, { "uucp", LOG_UUCP }, { "local0", LOG_LOCAL0 }, { "local1", LOG_LOCAL1 }, { "local2", LOG_LOCAL2 }, { "local3", LOG_LOCAL3 }, { "local4", LOG_LOCAL4 }, { "local5", LOG_LOCAL5 }, { "local6", LOG_LOCAL6 }, { "local7", LOG_LOCAL7 }, { NULL, -1 } }; #endif #include "rsyslog.h" #include "template.h" #include "outchannel.h" #include "syslogd.h" #include "syslogd-types.h" #include "stringbuf.h" #include "parse.h" #include "srUtils.h" #ifdef USE_PTHREADS #include #endif #ifdef WITH_DB #define _DB_MAXDBLEN 128 /* maximum number of db */ #define _DB_MAXUNAMELEN 128 /* maximum number of user name */ #define _DB_MAXPWDLEN 128 /* maximum number of user's pass */ #define _DB_DELAYTIMEONERROR 20 /* If an error occur we stop logging until a delayed time is over */ #endif #ifndef UTMP_FILE #ifdef UTMP_FILENAME #define UTMP_FILE UTMP_FILENAME #else #ifdef _PATH_UTMP #define UTMP_FILE _PATH_UTMP #else #define UTMP_FILE "/etc/utmp" #endif #endif #endif #ifndef _PATH_LOGCONF #define _PATH_LOGCONF "/etc/rsyslog.conf" #endif #if defined(SYSLOGD_PIDNAME) #undef _PATH_LOGPID #if defined(FSSTND) #ifdef BSD #define _PATH_VARRUN "/var/run/" #endif #ifdef __sun #define _PATH_VARRUN "/var/run/" #endif #define _PATH_LOGPID _PATH_VARRUN SYSLOGD_PIDNAME #else #define _PATH_LOGPID "/etc/" SYSLOGD_PIDNAME #endif #else #ifndef _PATH_LOGPID #if defined(FSSTND) #define _PATH_LOGPID _PATH_VARRUN "rsyslogd.pid" #else #define _PATH_LOGPID "/etc/rsyslogd.pid" #endif #endif #endif #ifndef _PATH_DEV #define _PATH_DEV "/dev/" #endif #ifndef _PATH_CONSOLE #define _PATH_CONSOLE "/dev/console" #endif #ifndef _PATH_TTY #define _PATH_TTY "/dev/tty" #endif #ifndef _PATH_LOG #ifdef BSD #define _PATH_LOG "/var/run/log" #else #define _PATH_LOG "/dev/log" #endif #endif /* IPv6 compatibility layer for older platforms * We need to handle a few things different if we are running * on an older platform which does not support all the glory * of IPv6. We try to limit toll on features and reliability, * but obviously it is better to run rsyslog on a platform that * supports everything... * rgerhards, 2007-06-22 */ #ifndef AI_NUMERICSERV # define AI_NUMERICSERV 0 #endif /* The following #ifdef sequence is a small compatibility * layer. It tries to work around the different availality * levels of SO_BSDCOMPAT on linuxes... * I borrowed this code from * http://www.erlang.org/ml-archive/erlang-questions/200307/msg00037.html * It still needs to be a bit better adapted to rsyslog. * rgerhards 2005-09-19 */ #ifndef BSD #include static int should_use_so_bsdcompat(void) { static int init_done; static int so_bsdcompat_is_obsolete; if (!init_done) { struct utsname utsname; unsigned int version, patchlevel; init_done = 1; if (uname(&utsname) < 0) { dprintf("uname: %s\r\n", strerror(errno)); return 1; } /* Format is .. where the first three are unsigned integers and the last is an arbitrary string. We only care about the first two. */ if (sscanf(utsname.release, "%u.%u", &version, &patchlevel) != 2) { dprintf("uname: unexpected release '%s'\r\n", utsname.release); return 1; } /* SO_BSCOMPAT is deprecated and triggers warnings in 2.5 kernels. It is a no-op in 2.4 but not in 2.2 kernels. */ if (version > 2 || (version == 2 && patchlevel >= 5)) so_bsdcompat_is_obsolete = 1; } return !so_bsdcompat_is_obsolete; } #else /* #ifndef BSD */ #define should_use_so_bsdcompat() 1 #endif /* #ifndef BSD */ #ifndef SO_BSDCOMPAT /* this shall prevent compiler errors due to undfined name */ #define SO_BSDCOMPAT 0 #endif static char *ConfFile = _PATH_LOGCONF; /* read-only after startup */ static char *PidFile = _PATH_LOGPID; /* read-only after startup */ static char ctty[] = _PATH_CONSOLE; /* this is read-only */ static pid_t myPid; /* our pid for use in self-generated messages, e.g. on startup */ /* mypid is read-only after the initial fork() */ static int debugging_on = 0; /* read-only, except on sig USR1 */ static int restart = 0; /* do restart (config read) - multithread safe */ static int bRequestDoMark = 0; /* do mark processing? (multithread safe) */ #define MAXFUNIX 20 static int glblHadMemShortage = 0; /* indicates if we had memory shortage some time during the run */ static int iDynaFileCacheSize = 10; /* max cache for dynamic files */ static int fCreateMode = 0644; /* mode to use when creating files */ int nfunix = 1; /* number of Unix sockets open / read-only after startup */ int startIndexUxLocalSockets = 0; /* process funix from that index on (used to * suppress local logging. rgerhards 2005-08-01 * read-only after startup */ int funixParseHost[MAXFUNIX] = { 0, }; /* should parser parse host name? read-only after startup */ char *funixn[MAXFUNIX] = { _PATH_LOG }; /* read-only after startup */ int funix[MAXFUNIX] = { -1, }; /* read-only after startup */ #define INTERNAL_NOPRI 0x10 /* the "no priority" priority */ #define TABLE_NOPRI 0 /* Value to indicate no priority in f_pmask */ #define TABLE_ALLPRI 0xFF /* Value to indicate all priorities in f_pmask */ #define LOG_MARK LOG_MAKEPRI(LOG_NFACILITIES, 0) /* mark "facility" */ /* Flags to logmsg(). */ #define INTERNAL_MSG 0x001 /* msg generated by logmsgInternal() --> special handling */ #define SYNC_FILE 0x002 /* do fsync on file after printing */ #define ADDDATE 0x004 /* add a date to the message */ #define MARK 0x008 /* this message is a mark */ /* * This table contains plain text for h_errno errors used by the * net subsystem. */ static const char *sys_h_errlist[] = { "No problem", /* NETDB_SUCCESS */ "Authoritative answer: host not found", /* HOST_NOT_FOUND */ "Non-authoritative answer: host not found, or serverfail", /* TRY_AGAIN */ "Non recoverable errors", /* NO_RECOVERY */ "Valid name, no data record of requested type", /* NO_DATA */ "no address, look for MX record" /* NO_ADDRESS */ }; /* This table lists the directive lines: */ static const char *directive_name_list[] = { "template", "outchannel", "allowedsender", "filecreatemode", "umask", "dynafilecachesize" }; /* ... and their definitions: */ enum eDirective { DIR_TEMPLATE = 0, DIR_OUTCHANNEL = 1, DIR_ALLOWEDSENDER = 2, DIR_FILECREATEMODE = 3, DIR_UMASK = 4, DIR_DYNAFILECACHESIZE = 5}; /* The following global variables are used for building * tag and host selector lines during startup and config reload. * This is stored as a global variable pool because of its ease. It is * also fairly compatible with multi-threading as the stratup code must * be run in a single thread anyways. So there can be no race conditions. These * variables are no longer used once the configuration has been loaded (except, * of course, during a reload). rgerhards 2005-10-18 */ static EHostnameCmpMode eDfltHostnameCmpMode; static rsCStrObj *pDfltHostnameCmp; static rsCStrObj *pDfltProgNameCmp; /* supporting structures for multithreading */ #ifdef USE_PTHREADS /* this is the first approach to a queue, this time with static * memory. */ #define QUEUESIZE 10000 typedef struct { void* buf[QUEUESIZE]; long head, tail; int full, empty; pthread_mutex_t *mut; pthread_cond_t *notFull, *notEmpty; } msgQueue; int bRunningMultithreaded = 0; /* Is this program running in multithreaded mode? */ msgQueue *pMsgQueue = NULL; static pthread_t thrdWorker; static int bGlblDone = 0; #endif /* END supporting structures for multithreading */ static int bParseHOSTNAMEandTAG = 1; /* global config var: should the hostname and tag be * parsed inside message - rgerhards, 2006-03-13 */ static int bFinished = 0; /* used by termination signal handler, read-only except there * is either 0 or the number of the signal that requested the * termination. */ /* * Intervals at which we flush out "message repeated" messages, * in seconds after previous message is logged. After each flush, * we move to the next interval until we reach the largest. */ int repeatinterval[] = { 30, 60 }; /* # of secs before flush */ #define MAXREPEAT ((sizeof(repeatinterval) / sizeof(repeatinterval[0])) - 1) #define REPEATTIME(f) ((f)->f_time + repeatinterval[(f)->f_repeatcount]) #define BACKOFF(f) { if (++(f)->f_repeatcount > MAXREPEAT) \ (f)->f_repeatcount = MAXREPEAT; \ } #ifdef SYSLOG_INET union sockunion { struct sockinet { u_char si_len; u_char si_family; } su_si; struct sockaddr_in su_sin; struct sockaddr_in6 su_sin6; }; #define INET_SUSPEND_TIME 60 /* equal to 1 minute * rgerhards, 2005-07-26: This was 3 minutes. As the * same timer is used for tcp based syslog, we have * reduced it. However, it might actually be worth * thinking about a buffered tcp sender, which would be * a much better alternative. When that happens, this * time here can be re-adjusted to 3 minutes (or, * even better, made configurable). */ #define INET_RETRY_MAX 30 /* maximum of retries for gethostbyname() */ /* was 10, changed to 30 because we reduced INET_SUSPEND_TIME by one third. So * this "fixes" some of implications of it (see comment on INET_SUSPEND_TIME). * rgerhards, 2005-07-26 */ #endif #define LIST_DELIMITER ':' /* delimiter between two hosts */ char *TypeNames[] = { "UNUSED", "FILE", "TTY", "CONSOLE", "FORW", "USERS", "WALL", "FORW(SUSPENDED)", "FORW(UNKNOWN)", "PIPE", "MYSQL", "DISCARD", "SHELL" }; struct filed *Files = NULL; /* read-only after init() (but beware of sigusr1!) */ struct filed consfile; /* initialized on startup, used during actions - maybe NON THREAD-SAFE */ struct filed emergfile; /* this is only used for emergency logging when * no actual config has been loaded. * useded during actions in emergencase - thread-safety doubtful */ struct code { char *c_name; int c_val; }; static struct code PriNames[] = { {"alert", LOG_ALERT}, {"crit", LOG_CRIT}, {"debug", LOG_DEBUG}, {"emerg", LOG_EMERG}, {"err", LOG_ERR}, {"error", LOG_ERR}, /* DEPRECATED */ {"info", LOG_INFO}, {"none", INTERNAL_NOPRI}, /* INTERNAL */ {"notice", LOG_NOTICE}, {"panic", LOG_EMERG}, /* DEPRECATED */ {"warn", LOG_WARNING}, /* DEPRECATED */ {"warning", LOG_WARNING}, {"*", TABLE_ALLPRI}, {NULL, -1} }; static struct code FacNames[] = { {"auth", LOG_AUTH}, {"authpriv", LOG_AUTHPRIV}, {"cron", LOG_CRON}, {"daemon", LOG_DAEMON}, {"kern", LOG_KERN}, {"lpr", LOG_LPR}, {"mail", LOG_MAIL}, {"mark", LOG_MARK}, /* INTERNAL */ {"news", LOG_NEWS}, {"security", LOG_AUTH}, /* DEPRECATED */ {"syslog", LOG_SYSLOG}, {"user", LOG_USER}, {"uucp", LOG_UUCP}, #if defined(LOG_FTP) {"ftp", LOG_FTP}, #endif {"local0", LOG_LOCAL0}, {"local1", LOG_LOCAL1}, {"local2", LOG_LOCAL2}, {"local3", LOG_LOCAL3}, {"local4", LOG_LOCAL4}, {"local5", LOG_LOCAL5}, {"local6", LOG_LOCAL6}, {"local7", LOG_LOCAL7}, {NULL, -1}, }; static int Debug; /* debug flag - read-only after startup */ static int bEscapeCCOnRcv; /* escape control characters on reception: 0 - no, 1 - yes */ static int bReduceRepeatMsgs; /* reduce repeated message - 0 - no, 1 - yes */ static int logEveryMsg = 0;/* no repeat message processing - read-only after startup * 0 - suppress duplicate messages * 1 - do NOT suppress duplicate messages */ static char LocalHostName[MAXHOSTNAMELEN+1];/* our hostname - read-only after startup */ static char *LocalDomain; /* our local domain name - read-only after startup */ static int *finet = NULL; /* Internet datagram sockets, first element is nbr of elements * read-only after init(), but beware of restart! */ static char *LogPort = "514"; /* port number for INET connections */ static int MarkInterval = 20 * 60; /* interval between marks in seconds - read-only after startup */ static int family = PF_UNSPEC; /* protocol family (IPv4, IPv6 or both), set via cmdline */ static int send_to_all = 0; /* send message to all IPv4/IPv6 addresses */ static int MarkSeq = 0; /* mark sequence number - modified in domark() only */ static int NoFork = 0; /* don't fork - don't run in daemon mode - read-only after startup */ static int DisableDNS = 0; /* don't look up IP addresses of remote messages */ static int AcceptRemote = 0;/* receive messages that come via UDP - read-only after startup */ static char **StripDomains = NULL;/* these domains may be stripped before writing logs - r/o after s.u.*/ static char **LocalHosts = NULL;/* these hosts are logged with their hostname - read-only after startup*/ static int NoHops = 1; /* Can we bounce syslog messages through an intermediate host. Read-only after startup */ static int Initialized = 0; /* set when we have initialized ourselves * rgerhards 2004-11-09: and by initialized, we mean that * the configuration file could be properly read AND the * syslog/udp port could be obtained (the later is debatable). * It is mainly a setting used for emergency logging: if * something really goes wild, we can not do as indicated in * the log file, but we still log messages to the system * console. This is probably the best that can be done in * such a case. * read-only after startup, but modified during restart */ extern int errno; /* support for simple textual representatio of FIOP names * rgerhards, 2005-09-27 */ static char* getFIOPName(unsigned iFIOP) { char *pRet; switch(iFIOP) { case FIOP_CONTAINS: pRet = "contains"; break; case FIOP_ISEQUAL: pRet = "isequal"; break; case FIOP_STARTSWITH: pRet = "startswith"; break; default: pRet = "NOP"; break; } return pRet; } /* support for defining allowed TCP and UDP senders. We use the same * structure to implement this (a linked list), but we define two different * list roots, one for UDP and one for TCP. * rgerhards, 2005-09-26 */ #ifdef SYSLOG_INET struct AllowedSenders { unsigned long allowedSender;/* ip address allowed */ uchar bitsToShift; /* defines how many bits should be discarded (eqiv to mask) */ struct AllowedSenders *pNext; }; /* All of the five below are read-only after startup */ static struct AllowedSenders *pAllowedSenders_UDP = NULL; /* the roots of the allowed sender */ static struct AllowedSenders *pAllowedSenders_TCP = NULL; /* lists. If NULL, all senders are ok! */ static struct AllowedSenders *pLastAllowedSenders_UDP = NULL; /* and now the pointers to the last */ static struct AllowedSenders *pLastAllowedSenders_TCP = NULL; /* element in the respective list */ #endif /* #ifdef SYSLOG_INET */ static int option_DisallowWarning = 1; /* complain if message from disallowed sender is received */ /* hardcoded standard templates (used for defaults) */ static uchar template_TraditionalFormat[] = "\"%TIMESTAMP% %HOSTNAME% %syslogtag%%msg:::drop-last-lf%\n\""; static uchar template_WallFmt[] = "\"\r\n\7Message from syslogd@%HOSTNAME% at %timegenerated% ...\r\n %syslogtag%%msg%\n\r\""; static uchar template_StdFwdFmt[] = "\"<%PRI%>%TIMESTAMP% %HOSTNAME% %syslogtag%%msg%\""; static uchar template_StdUsrMsgFmt[] = "\" %syslogtag%%msg%\n\r\""; static uchar template_StdDBFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-mysql%', '%timegenerated:::date-mysql%', %iut%, '%syslogtag%')\",SQL"; /* end template */ /* up to the next comment, prototypes that should be removed by reordering */ #ifdef USE_PTHREADS static msgQueue *queueInit (void); static void *singleWorker(void *vParam); /* REMOVEME later 2005-10-24 */ #endif /* Function prototypes. */ static rsRetVal aquirePROCIDFromTAG(msg_t *pM); static char* getProgramName(msg_t*); static char **crunch_list(char *list); static void printchopped(char *hname, char *msg, int len, int fd, int iSourceType); static void printline(char *hname, char *msg, int iSource); static void logmsg(int pri, msg_t*, int flags); static void fprintlog(register selector_t *f); static void wallmsg(register selector_t *f); static void reapchild(); static char *cvthname(struct sockaddr_storage *f); static void debug_switch(); static rsRetVal cfline(char *line, register selector_t *f); static int decode(uchar *name, struct code *codetab); static void sighup_handler(); static void die(int sig); #ifdef WITH_DB static void initMySQL(register selector_t *f); static void writeMySQL(register selector_t *f); static void closeMySQL(register selector_t *f); static void reInitMySQL(register selector_t *f); static int checkDBErrorState(register selector_t *f); static void DBErrorHandler(register selector_t *f); #endif static int getSubString(uchar **pSrc, char *pDst, size_t DstSize, char cSep); static void getCurrTime(struct syslogTime *t); static void cflineSetTemplateAndIOV(selector_t *f, char *pTemplateName); /* Access functions for the selector_t. These functions are primarily * necessary to make things thread-safe. Consequently, they are slim * if we compile without pthread support. * rgerhards 2005-10-24 */ /* END Access functions for the selector_t */ /* Code for handling allowed/disallowed senders */ #ifdef SYSLOG_INET /* function to add an allowed sender to the allowed sender list. The * root of the list is caller-provided, so it can be used for all * supported lists. The caller must provide a pointer to the root, * as it eventually needs to be updated. Also, a pointer to the * pointer to the last element must be provided (to speed up adding * list elements). * rgerhards, 2005-09-26 */ static rsRetVal AddAllowedSender(struct AllowedSenders **ppRoot, struct AllowedSenders **ppLast, unsigned int iAllow, int iSignificantBits) { struct AllowedSenders *pEntry; assert(ppRoot != NULL); assert(ppLast != NULL); if((pEntry = (struct AllowedSenders*) calloc(1, sizeof(struct AllowedSenders))) == NULL) return RS_RET_OUT_OF_MEMORY; /* no options left :( */ if(iSignificantBits == 0) /* we handle this seperatly just to provide a better * error message. */ logerror("You can not specify 0 bits of the netmask, this would " "match ALL systems. If you really intend to do that, " "remove all $AllowedSender directives."); if((iSignificantBits < 1) || (iSignificantBits > 32)) { logerrorInt("Invalid bit number in IP address - adjusted to 32", iSignificantBits); iSignificantBits = 32; } /* populate entry */ pEntry->bitsToShift = 32 - iSignificantBits; /* IPv4! */ pEntry->allowedSender = iAllow >> pEntry->bitsToShift; pEntry->pNext = NULL; /* enqueue */ if(*ppRoot == NULL) { *ppRoot = pEntry; } else { (*ppLast)->pNext = pEntry; } *ppLast = pEntry; return RS_RET_OK; } #endif /* #ifdef SYSLOG_INET */ #ifdef SYSLOG_INET /* Print an allowed sender list. The caller must tell us which one. * iListToPrint = 1 means UDP, 2 means TCP * rgerhards, 2005-09-27 */ static void PrintAllowedSenders(int iListToPrint) { struct AllowedSenders *pSender; unsigned uSender; assert((iListToPrint == 1) || (iListToPrint == 2)); printf("\nAllowed %s Senders:\n", (iListToPrint == 1) ? "UDP" : "TCP"); pSender = (iListToPrint == 1) ? pAllowedSenders_UDP : pAllowedSenders_TCP; if(pSender == NULL) { printf("\tNo restrictions set.\n"); } else { while(pSender != NULL) { uSender = pSender->allowedSender << pSender->bitsToShift; /* it might be wiser to use socket functions to * do the conversion, but we need to change it for * IPv6 anyhow... so we use the quick way. */ printf("\t%u.%u.%u.%u/%u\n", uSender >> 24 & 0xff, uSender >> 16 & 0xff, uSender >> 8 & 0xff, uSender & 0xff, 32 - pSender->bitsToShift ); pSender = pSender->pNext; } } } #endif /* #ifdef SYSLOG_INET */ #ifdef SYSLOG_INET /* check if a sender is allowed. The root of the the allowed sender. * list must be proveded by the caller. As such, this function can be * used to check both UDP and TCP allowed sender lists. * returns 1, if the sender is allowed, 0 otherwise. * rgerhards, 2005-09-26 * for the time being, this function works with IPv4 addresses only. All * others are allowed senders by virtue of being IPv6. This needs to be * changed - TODO. rgerhards, 2007-06-22 */ static int isAllowedSender(struct AllowedSenders *pAllowRoot, struct sockaddr_storage *pFrom) { struct AllowedSenders *pAllow; unsigned long ulAddrInLocalByteOrder; union sockunion *pFromAddr; assert(pFrom != NULL); if(pAllowRoot == NULL) return 1; /* checking disabled, everything is valid! */ if(pFrom->ss_family == AF_INET6) return 1; /* for the time being, IPv6 addresses are always valid */ if(pFrom->ss_family != AF_INET) return 0; /* malformed, so by default no valid sender! */ pFromAddr = (union sockunion*) pFrom; ulAddrInLocalByteOrder = ntohl(pFromAddr->su_sin.sin_addr.s_addr); /* was: ulAddrInLocalByteOrder = ntohl(pFrom->sin_addr.s_addr); */ /* now we loop through the list of allowed senders. As soon as * we find a match, we return back (indicating allowed). We loop * until we are out of allowed senders. If so, we fall through the * loop and the function's terminal return statement will indicate * that the sender is disallowed. */ for(pAllow = pAllowRoot ; pAllow != NULL ; pAllow = pAllow->pNext) { if( (ulAddrInLocalByteOrder >> pAllow->bitsToShift) == pAllow->allowedSender) return 1; } dprintf("%x is not an allowed sender\n", (unsigned) ulAddrInLocalByteOrder); return 0; } #endif /* #ifdef SYSLOG_INET */ /* code to free all sockets within a socket table. * A socket table is a descriptor table where the zero * element has the count of elements. This is used for * listening sockets. The socket table itself is also * freed. * A POINTER to this structure must be provided, thus * double indirection! * rgerhards, 2007-06-28 */ static void freeAllSockets(int **socks) { assert(socks != NULL); assert(*socks != NULL); while(**socks) { dprintf("Closing socket %d.\n", (*socks)[**socks]); close((*socks)[**socks]); (**socks)--; } free(*socks); socks = NULL; } /******************************************************************** * ### SYSLOG/TCP CODE ### * This is code for syslog/tcp. This code would belong to a separate * file - but I have put it here to avoid hassle with CVS. Over * time, I expect rsyslog to utilize liblogging for actual network * I/O. So the tcp code will be (re)moved some time. I don't like * to add a new file to cvs that I will push to the attic in just * a few weeks (month at most...). So I simply add the code here. * * Place no unrelated code between this comment and the * END tcp comment! * * 2005-07-04 RGerhards (Happy independence day to our US friends!) ********************************************************************/ #ifdef SYSLOG_INET #define TCPSESS_MAX_DEFAULT 200 /* default for nbr of tcp sessions if no number is given */ static int iTCPSessMax = TCPSESS_MAX_DEFAULT; /* actual number of sessions */ static char *TCPLstnPort = "0"; /* read-only after startup */ static int bEnableTCP = 0; /* read-only after startup */ static int *sockTCPLstn = NULL; /* read-only after startup, modified by restart */ struct TCPSession { int sock; int iMsg; /* index of next char to store in msg */ int bAtStrtOfFram; /* are we at the very beginning of a new frame? */ int iOctetsRemain; /* Number of Octets remaining in message */ TCPFRAMINGMODE eFraming; char msg[MAXLINE+1]; char *fromHost; } *pTCPSessions = NULL; /* The thread-safeness of the sesion table is doubtful */ /* configure TCP listener settings. This is called during command * line parsing. The argument following -t is supplied as an argument. * The format of this argument is * ", " * Typically, there is no whitespace between port and session number. * (but it may be...). * NOTE: you can not use dprintf() in here - the dprintf() system is * not yet initilized when this function is called. * rgerhards, 2007-06-21 * We can also not use logerror(), as that system is also not yet * initialized... rgerhards, 2007-06-28 */ static void configureTCPListen(char *optarg) { register int i; register char *pArg = optarg; assert(optarg != NULL); bEnableTCP = -1; /* enable TCP listening */ /* extract port */ i = 0; while(isdigit((int) *pArg)) { i = i * 10 + *pArg++ - '0'; } if( i >= 0 && i <= 65535) { TCPLstnPort = optarg; } else { fprintf(stderr, "rsyslogd: Invalid TCP listen port %d - changed to 514.\n", i); TCPLstnPort = "514"; } /* number of sessions */ if(*pArg == ','){ *pArg = '\0'; /* hack: terminates port (see a few lines above, same buffer!) */ ++pArg; while(isspace((int) *pArg)) ++pArg; /* ok, here should be the number... */ i = 0; while(isdigit((int) *pArg)) { i = i * 10 + *pArg++ - '0'; } if(i > 1) iTCPSessMax = i; else { /* too small, need to adjust */ fprintf(stderr, "rsyslogd: TCP session max configured to %d [-t %s] - changing to 1.\n", i, optarg); iTCPSessMax = 1; } } else if(*pArg == '\0') { /* use default for session number - that's already set...*/ /*EMPTY BY INTENSION*/ } else { fprintf(stderr, "rsyslogd: Invalid -t %s command line option.\n", optarg); } } /* Initialize the session table * returns 0 if OK, somewhat else otherwise */ static int TCPSessInit(void) { register int i; assert(pTCPSessions == NULL); dprintf("Allocating buffer for %d TCP sessions.\n", iTCPSessMax); if((pTCPSessions = (struct TCPSession *) malloc(sizeof(struct TCPSession) * iTCPSessMax)) == NULL) { dprintf("Error: TCPSessInit() could not alloc memory for TCP session table.\n"); return(1); } for(i = 0 ; i < iTCPSessMax ; ++i) { pTCPSessions[i].sock = -1; /* no sock */ pTCPSessions[i].iMsg = 0; /* just make sure... */ pTCPSessions[i].bAtStrtOfFram = 1; /* indicate frame header expected */ pTCPSessions[i].eFraming = TCP_FRAMING_OCTET_STUFFING; /* just make sure... */ } return(0); } /* find a free spot in the session table. If the table * is full, -1 is returned, else the index of the free * entry (0 or higher). */ static int TCPSessFindFreeSpot(void) { register int i; for(i = 0 ; i < iTCPSessMax ; ++i) { if(pTCPSessions[i].sock == -1) break; } return((i < iTCPSessMax) ? i : -1); } /* Get the next session index. Free session tables entries are * skipped. This function is provided the index of the last * session entry, or -1 if no previous entry was obtained. It * returns the index of the next session or -1, if there is no * further entry in the table. Please note that the initial call * might as well return -1, if there is no session at all in the * session table. */ static int TCPSessGetNxtSess(int iCurr) { register int i; for(i = iCurr + 1 ; i < iTCPSessMax ; ++i) if(pTCPSessions[i].sock != -1) break; return((i < iTCPSessMax) ? i : -1); } /* De-Initialize TCP listner sockets. * This function deinitializes everything, including freeing the * session table. No TCP listen receive operations are permitted * unless the subsystem is reinitialized. * rgerhards, 2007-06-21 */ static void deinit_tcp_listener(void) { int iTCPSess; assert(pTCPSessions != NULL); /* close all TCP connections! */ iTCPSess = TCPSessGetNxtSess(-1); while(iTCPSess != -1) { int fd; fd = pTCPSessions[iTCPSess].sock; dprintf("Closing TCP Session %d\n", fd); close(fd); /* now get next... */ iTCPSess = TCPSessGetNxtSess(iTCPSess); } /* we are done with the session table - so get rid of it... */ free(pTCPSessions); pTCPSessions = NULL; /* just to make sure... */ /* finally close the listen sockets themselfs */ freeAllSockets(&sockTCPLstn); } /* Initialize TCP sockets (for listener) * This function returns either NULL (which means it failed) or * a pointer to an array of file descriptiors. If the pointer is * returned, the zeroest element [0] contains the count of valid * descriptors. The descriptors themself follow in range * [1] ... [num-descriptors]. It is guaranteed that each of these * descriptors is valid, at least when this function returns. * Please note that technically the array may be larger than the number * of valid pointers stored in it. The memory overhead is minimal, so * we do not bother to re-allocate an array of the exact size. Logically, * the array still contains the exactly correct number of descriptors. */ static int *create_tcp_socket(void) { struct addrinfo hints, *res, *r; int error, maxs, *s, *socks, on = 1; if(!strcmp(TCPLstnPort, "0")) TCPLstnPort = "514"; /* use default - we can not do service db update, because there is * no IANA-assignment for syslog/tcp. In the long term, we might * re-use RFC 3195 port of 601, but that would probably break to * many existing configurations. * rgerhards, 2007-06-28 */ memset(&hints, 0, sizeof(hints)); hints.ai_flags = AI_PASSIVE | AI_NUMERICSERV; hints.ai_family = family; hints.ai_socktype = SOCK_STREAM; error = getaddrinfo(NULL, TCPLstnPort, &hints, &res); if(error) { logerror((char*) gai_strerror(error)); return NULL; } /* Count max number of sockets we may open */ for (maxs = 0, r = res; r != NULL ; r = r->ai_next, maxs++) /* EMPTY */; socks = malloc((maxs+1) * sizeof(int)); if (socks == NULL) { logerror("couldn't allocate memory for TCP listen sockets, suspending TCP message reception."); freeaddrinfo(res); return NULL; } *socks = 0; /* num of sockets counter at start of array */ s = socks + 1; for (r = res; r != NULL ; r = r->ai_next) { *s = socket(r->ai_family, r->ai_socktype, r->ai_protocol); if (*s < 0) { if(!(r->ai_family == PF_INET6 && errno == EAFNOSUPPORT)) logerror("create_udp_socket(), socket"); /* it is debatable if PF_INET with EAFNOSUPPORT should * also be ignored... */ continue; } #ifdef IPV6_V6ONLY if (r->ai_family == AF_INET6) { int on = 1; if (setsockopt(*s, IPPROTO_IPV6, IPV6_V6ONLY, (char *)&on, sizeof (on)) < 0) { logerror("TCP setsockopt"); close(*s); *s = -1; continue; } } #endif if (setsockopt(*s, SOL_SOCKET, SO_REUSEADDR, (char *) &on, sizeof(on)) < 0 ) { logerror("TCP setsockopt(REUSEADDR)"); close(*s); *s = -1; continue; } /* We need to enable BSD compatibility. Otherwise an attacker * could flood our log files by sending us tons of ICMP errors. */ #ifndef BSD if (should_use_so_bsdcompat()) { if (setsockopt(*s, SOL_SOCKET, SO_BSDCOMPAT, (char *) &on, sizeof(on)) < 0) { logerror("TCP setsockopt(BSDCOMPAT)"); close(*s); *s = -1; continue; } } #endif if( (bind(*s, r->ai_addr, r->ai_addrlen) < 0) #ifndef IPV6_V6ONLY && (errno != EADDRINUSE) #endif ) { logerror("TCP bind"); close(*s); *s = -1; continue; } if( listen(*s,iTCPSessMax / 10 + 5) < 0) { /* If the listen fails, it most probably fails because we ask * for a too-large backlog. So in this case we first set back * to a fixed, reasonable, limit that should work. Only if * that fails, too, we give up. */ logerrorInt("listen with a backlog of %d failed - retrying with default of 32.", iTCPSessMax / 10 + 5); if(listen(*s, 32) < 0) { logerror("TCP listen, suspending tcp inet"); close(*s); *s = -1; continue; } } (*socks)++; s++; } if(res != NULL) freeaddrinfo(res); if(Debug && *socks != maxs) dprintf("We could initialize %d TCP listen sockets out of %d we received " "- this may or may not be an error indication.\n", *socks, maxs); if(*socks == 0) { logerror("No TCP listen socket could successfully be initialized, " "message reception via TCP disabled.\n"); free(socks); return(NULL); } /* OK, we had success. Now it is also time to * initialize our connections */ if(TCPSessInit() != 0) { /* OK, we are in some trouble - we could not initialize the * session table, so we can not continue. We need to free all * we have assigned so far, because we can not really use it... */ logerror("Could not initialize TCP session table, suspending TCP message reception."); freeAllSockets(&socks); /* prevent a socket leak */ return(NULL); } return(socks); } /* Accept new TCP connection; make entry in session table. If there * is no more space left in the connection table, the new TCP * connection is immediately dropped. */ static void TCPSessAccept(int fd) { int newConn; int iSess; struct sockaddr_storage addr; socklen_t addrlen = sizeof(struct sockaddr); int lenHostName; char *fromHost; char *pBuf; newConn = accept(fd, (struct sockaddr*) &addr, &addrlen); if (newConn < 0) { logerror("tcp accept, ignoring error and connection request"); return; } /* Add to session list */ iSess = TCPSessFindFreeSpot(); if(iSess == -1) { errno = 0; logerror("too many tcp sessions - dropping incoming request"); close(newConn); return; } /* OK, we have a "good" index... */ /* get the host name */ fromHost = cvthname(&addr); /* Here we check if a host is permitted to send us * syslog messages. If it isn't, we do not further * process the message but log a warning (if we are * configured to do this). * rgerhards, 2005-09-26 */ if(!isAllowedSender(pAllowedSenders_TCP, &addr)) { if(option_DisallowWarning) { errno = 0; logerrorSz("TCP message from disallowed sender %s discarded", fromHost); } close(newConn); return; } /* OK, we have an allowed sender, so let's continue */ lenHostName = strlen(fromHost) + 1; /* for \0 byte */ if((pBuf = (char*) malloc(sizeof(char) * lenHostName)) == NULL) { glblHadMemShortage = 1; pTCPSessions[iSess].fromHost = "NO-MEMORY-FOR-HOSTNAME"; } else { memcpy(pBuf, fromHost, lenHostName); pTCPSessions[iSess].fromHost = pBuf; } pTCPSessions[iSess].sock = newConn; pTCPSessions[iSess].iMsg = 0; /* init msg buffer! */ } /* This should be called before a normal (non forced) close * of a TCP session. This function checks if there is any unprocessed * message left in the TCP stream. Such a message is probably a * fragement. If evrything goes well, we must be right at the * beginnig of a new frame without any data received from it. If * not, there is some kind of a framing error. I think I remember that * some legacy syslog/TCP implementations have non-LF terminated * messages at the end of the stream. For now, we allow this behaviour. * Later, it should probably become a configuration option. * rgerhards, 2006-12-07 */ static void TCPSessPrepareClose(int iTCPSess) { if(iTCPSess < 0 || iTCPSess > iTCPSessMax) { errno = 0; logerror("internal error, trying to close an invalid TCP session!"); return; } if(pTCPSessions[iTCPSess].bAtStrtOfFram == 1) { /* this is how it should be. There is no unprocessed * data left and such we have nothing to do. For simplicity * reasons, we immediately return in that case. */ return; } /* we have some data left! */ if(pTCPSessions[iTCPSess].eFraming == TCP_FRAMING_OCTET_COUNTING) { /* In this case, we have an invalid frame count and thus * generate an error message and discard the frame. */ logerrorInt("Incomplete frame at end of stream in session %d - " "ignoring extra data (a message may be lost).\n", pTCPSessions[iTCPSess].sock); /* nothing more to do */ } else { /* here, we have traditional framing. Missing LF at the end * of message may occur. As such, we process the message in * this case. */ dprintf("Extra data at end of stream in legacy syslog/tcp message - processing\n"); printchopped(pTCPSessions[iTCPSess].fromHost, pTCPSessions[iTCPSess].msg, pTCPSessions[iTCPSess].iMsg, pTCPSessions[iTCPSess].sock, 1); pTCPSessions[iTCPSess].bAtStrtOfFram = 1; } } /* Closes a TCP session and marks its slot in the session * table as unused. No attention is paid to the return code * of close, so potential-double closes are not detected. */ static void TCPSessClose(int iSess) { if(iSess < 0 || iSess > iTCPSessMax) { errno = 0; logerror("internal error, trying to close an invalid TCP session!"); return; } close(pTCPSessions[iSess].sock); pTCPSessions[iSess].sock = -1; free(pTCPSessions[iSess].fromHost); pTCPSessions[iSess].fromHost = NULL; /* not really needed, but... */ } /* Processes the data received via a TCP session. If there * is no other way to handle it, data is discarded. * Input parameter data is the data received, iLen is its * len as returned from recv(). iLen must be 1 or more (that * is errors must be handled by caller!). iTCPSess must be * the index of the TCP session that received the data. * rgerhards 2005-07-04 * Changed this functions interface. We now return a status of * what shall happen with the session. This is information for * the caller. If 1 is returned, the session should remain open * and additional data be accepted. If we return 0, the TCP * session is to be closed by the caller. This functionality is * needed in order to support framing errors, from which there * is no recovery possible other than session termination and * re-establishment. The need for this functionality thus is * primarily rooted in support for -transport-tls I-D framing. * rgerhards, 2006-12-07 */ static int TCPSessDataRcvd(int iTCPSess, char *pData, int iLen) { register int iMsg; char *pMsg; char *pEnd; assert(pData != NULL); assert(iLen > 0); assert(iTCPSess >= 0); assert(iTCPSess < iTCPSessMax); assert(pTCPSessions[iTCPSess].sock != -1); /* We now copy the message to the session buffer. As * it looks, we need to do this in any case because * we might run into multiple messages inside a single * buffer. Of course, we could think about optimizations, * but as this code is to be replaced by liblogging, it * probably doesn't make so much sense... * rgerhards 2005-07-04 * * Algo: * - copy message to buffer until the first LF is found * - printline() the buffer * - continue with copying */ iMsg = pTCPSessions[iTCPSess].iMsg; /* copy for speed */ pMsg = pTCPSessions[iTCPSess].msg; /* just a shortcut */ pEnd = pData + iLen; /* this is one off, which is intensional */ while(pData < pEnd) { /* Check if we are at a new frame */ if(pTCPSessions[iTCPSess].bAtStrtOfFram) { /* we need to look at the message and detect * the framing mode used *//* * Contrary to -transport-tls, we accept leading zeros in the message * length. We do this in the spirit of "Be liberal in what you accept, * and conservative in what you send". We expect that including leading * zeros could be a common coding error. * rgerhards, 2006-12-07 * The chairs of the IETF syslog-sec WG have announced that it is * consensus to do the octet count on the SYSLOG-MSG part only. I am * now changing the code to reflect this. Hopefully, it will not change * once again (there can no compatibility layer programmed for this). * To be on the save side, I just comment the code out. I mark these * comments with "IETF20061218". * rgerhards, 2006-12-19 */ if(isdigit((int) *pData)) { int iCnt; /* the frame count specified */ pTCPSessions[iTCPSess].eFraming = TCP_FRAMING_OCTET_COUNTING; /* in this mode, we have OCTET-COUNT SP MSG - so we now need * to extract the OCTET-COUNT and the SP and then extract * the msg. */ iCnt = 0; /* IETF20061218 int iNbrOctets = 0; / * number of octets already consumed */ while(isdigit((int) *pData)) { iCnt = iCnt * 10 + *pData - '0'; /* IETF20061218 ++iNbrOctets; */ ++pData; } dprintf("TCP Message with octet-counter, size %d.\n", iCnt); if(*pData == ' ') { ++pData; /* skip over SP */ /* IETF20061218 ++iNbrOctets; */ } else { /* TODO: handle "invalid frame" case */ logerrorInt("Framing Error in received TCP message: " "delimiter is not SP but has ASCII value %d.\n", *pData); return(0); /* unconditional error exit */ } /* IETF20061218 pTCPSessions[iTCPSess].iOctetsRemain = iCnt - iNbrOctets; */ pTCPSessions[iTCPSess].iOctetsRemain = iCnt; if(pTCPSessions[iTCPSess].iOctetsRemain < 1) { /* TODO: handle the case where the octet count is 0 or negative! */ dprintf("Framing Error: invalid octet count\n"); logerrorInt("Framing Error in received TCP message: " "invalid octet count %d.\n", pTCPSessions[iTCPSess].iOctetsRemain); return(0); /* unconditional error exit */ } } else { pTCPSessions[iTCPSess].eFraming = TCP_FRAMING_OCTET_STUFFING; /* No need to do anything else here in this case */ } pTCPSessions[iTCPSess].bAtStrtOfFram = 0; /* done frame header */ } /* now copy message until end of record */ if(iMsg >= MAXLINE) { /* emergency, we now need to flush, no matter if * we are at end of message or not... */ printchopped(pTCPSessions[iTCPSess].fromHost, pMsg, iMsg, pTCPSessions[iTCPSess].sock, 1); iMsg = 0; /* we might think if it is better to ignore the rest of the * message than to treat it as a new one. Maybe this is a good * candidate for a configuration parameter... * rgerhards, 2006-12-04 */ } if(*pData == '\n' && pTCPSessions[iTCPSess].eFraming == TCP_FRAMING_OCTET_STUFFING) { /* record delemiter? */ printchopped(pTCPSessions[iTCPSess].fromHost, pMsg, iMsg, pTCPSessions[iTCPSess].sock, 1); iMsg = 0; pTCPSessions[iTCPSess].bAtStrtOfFram = 1; ++pData; } else { /* IMPORTANT: here we copy the actual frame content to the message! */ *(pMsg + iMsg++) = *pData++; } if(pTCPSessions[iTCPSess].eFraming == TCP_FRAMING_OCTET_COUNTING) { /* do we need to find end-of-frame via octet counting? */ pTCPSessions[iTCPSess].iOctetsRemain--; if(pTCPSessions[iTCPSess].iOctetsRemain < 1) { /* we have end of frame! */ printchopped(pTCPSessions[iTCPSess].fromHost, pMsg, iMsg, pTCPSessions[iTCPSess].sock, 1); iMsg = 0; pTCPSessions[iTCPSess].bAtStrtOfFram = 1; } } } pTCPSessions[iTCPSess].iMsg = iMsg; /* persist value */ return(1); /* successful return */ } /* CODE FOR SENDING TCP MESSAGES */ /* get send status * rgerhards, 2005-10-24 */ static void TCPSendSetStatus(selector_t *f, enum TCPSendStatus iNewState) { assert(f != NULL); assert(f->f_type == F_FORW); assert(f->f_un.f_forw.protocol == FORW_TCP); assert( (iNewState == TCP_SEND_NOTCONNECTED) || (iNewState == TCP_SEND_CONNECTING) || (iNewState == TCP_SEND_READY)); /* there can potentially be a race condition, so guard by mutex */ # ifdef USE_PTHREADS pthread_mutex_lock(&f->f_un.f_forw.mtxTCPSend); # endif f->f_un.f_forw.status = iNewState; # ifdef USE_PTHREADS pthread_mutex_unlock(&f->f_un.f_forw.mtxTCPSend); # endif } /* set send status * rgerhards, 2005-10-24 */ static enum TCPSendStatus TCPSendGetStatus(selector_t *f) { enum TCPSendStatus eState; assert(f != NULL); assert(f->f_type == F_FORW); assert(f->f_un.f_forw.protocol == FORW_TCP); /* there can potentially be a race condition, so guard by mutex */ # ifdef USE_PTHREADS pthread_mutex_lock(&f->f_un.f_forw.mtxTCPSend); # endif eState = f->f_un.f_forw.status; # ifdef USE_PTHREADS pthread_mutex_unlock(&f->f_un.f_forw.mtxTCPSend); # endif return eState; } /* Initialize TCP sockets (for sender) * This is done once per selector line, if not yet initialized. */ static int TCPSendCreateSocket(selector_t *f) { int fd; struct addrinfo *r; assert(f != NULL); r = f->f_un.f_forw.f_addr; while(r != NULL) { fd = socket(r->ai_family, r->ai_socktype, r->ai_protocol); if (fd != -1) { /* We can not allow the TCP sender to block syslogd, at least * not in a single-threaded design. That would cause rsyslogd to * loose input messages - which obviously also would affect * other selector lines, too. So we do set it to non-blocking and * handle the situation ourselfs (by discarding messages). IF we run * dual-threaded, however, the situation is different: in this case, * the receivers and the selector line processing are only loosely * coupled via a memory buffer. Now, I think, we can afford the extra * wait time. Thus, we enable blocking mode for TCP if we compile with * pthreads. * rgerhards, 2005-10-25 */ # ifndef USE_PTHREADS /* set to nonblocking - rgerhards 2005-07-20 */ fcntl(fd, F_SETFL, fcntl(fd, F_GETFL) | O_NONBLOCK); # endif if (connect (fd, r->ai_addr, r->ai_addrlen) != 0) { if(errno == EINPROGRESS) { /* this is normal - will complete during select */ TCPSendSetStatus(f, TCP_SEND_CONNECTING); return fd; } else { dprintf("create tcp connection failed, reason %s", strerror(errno)); } } else { TCPSendSetStatus(f, TCP_SEND_READY); return fd; } close(fd); } else { dprintf("couldn't create send socket, reason %s", strerror(errno)); } r = r->ai_next; } dprintf("no working socket could be obtained"); return -1; } /* Sends a TCP message. It is first checked if the * session is open and, if not, it is opened. Then the send * is tried. If it fails, one silent re-try is made. If the send * fails again, an error status (-1) is returned. If all goes well, * 0 is returned. The TCP session is NOT torn down. * For now, EAGAIN is ignored (causing message loss) - but it is * hard to do something intelligent in this case. With this * implementation here, we can not block and/or defer. Things are * probably a bit better when we move to liblogging. The alternative * would be to enhance the current select server with buffering and * write descriptors. This seems not justified, given the expected * short life span of this code (and the unlikeliness of this event). * rgerhards 2005-07-06 * This function is now expected to stay. Libloging won't be used for * that purpose. I have added the param "len", because it is known by the * caller and so safes us some time. Also, it MUST be given because there * may be NULs inside msg so that we can not rely on strlen(). Please note * that the restrictions outlined above do not existin in multi-threaded * mode, which we assume will now be most often used. So there is no * real issue with the potential message loss in single-threaded builds. * rgerhards, 2006-11-30 * * In order to support compressed messages via TCP, we must support an * octet-counting based framing (LF may be part of the compressed message). * We are now supporting the same mode that is available in IETF I-D * syslog-transport-tls-05 (current at the time of this writing). This also * eases things when we go ahead and implement that framing. I have now made * available two cases where this framing is used: either by explitely * specifying it in the config file or implicitely when sending a compressed * message. In the later case, compressed and uncompressed messages within * the same session have different framings. If it is explicitely set to * octet-counting, only this framing mode is used within the session. * rgerhards, 2006-12-07 */ static int TCPSend(selector_t *f, char *msg, size_t len) { int retry = 0; int done = 0; int bIsCompressed; size_t lenSend; short f_type; char *buf = NULL; /* if this is non-NULL, it MUST be freed before return! */ enum TCPSendStatus eState; TCPFRAMINGMODE framingToUse; assert(f != NULL); assert(msg != NULL); assert(len > 0); bIsCompressed = *msg == 'z'; /* cache this, so that we can modify the message buffer */ /* select framing for this record. If we have a compressed record, we always need to * use octet counting because the data potentially contains all control characters * including LF. */ framingToUse = bIsCompressed ? TCP_FRAMING_OCTET_COUNTING : f->f_un.f_forw.tcp_framing; do { /* try to send message */ if(f->f_file <= 0) { /* we need to open the socket first */ if((f->f_file = TCPSendCreateSocket(f)) <= 0) { return -1; } } eState = TCPSendGetStatus(f); /* cache info */ if(eState == TCP_SEND_CONNECTING) { /* In this case, we save the buffer. If we have a * system with few messages, that hopefully prevents * message loss at all. However, we make no further attempts, * just the first message is saved. So we only try this * if there is not yet a saved message present. * rgerhards 2005-07-20 */ if(f->f_un.f_forw.savedMsg == NULL) { f->f_un.f_forw.savedMsg = malloc(len * sizeof(char)); if(f->f_un.f_forw.savedMsg == NULL) return 0; /* nothing we can do... */ memcpy(f->f_un.f_forw.savedMsg, msg, len); f->f_un.f_forw.savedMsgLen = len; } return 0; } else if(eState != TCP_SEND_READY) /* This here is debatable. For the time being, we * accept the loss of a single message (e.g. during * connection setup in favour of not messing with * wait time and timeouts. The reason is that such * things might otherwise cost us considerable message * loss on the receiving side (even at a timeout set * to just 1 second). - rgerhards 2005-07-20 */ return 0; /* now check if we need to add a line terminator. We need to * copy the string in memory in this case, this is probably * quicker than using writev and definitely quicker than doing * two socket calls. * rgerhards 2005-07-22 *//* * Some messages already contain a \n character at the end * of the message. We append one only if we there is not * already one. This seems the best fit, though this also * means the message does not arrive unaltered at the final * destination. But in the spirit of legacy syslog, this is * probably the best to do... * rgerhards 2005-07-20 */ /* Build frame based on selected framing */ if(framingToUse == TCP_FRAMING_OCTET_STUFFING) { if((*(msg+len-1) != '\n')) { if(buf != NULL) free(buf); /* in the malloc below, we need to add 2 to the length. The * reason is that we a) add one character and b) len does * not take care of the '\0' byte. Up until today, it was just * +1 , which caused rsyslogd to sometimes dump core. * I have added this comment so that the logic is not accidently * changed again. rgerhards, 2005-10-25 */ if((buf = malloc((len + 2) * sizeof(char))) == NULL) { /* extreme mem shortage, try to solve * as good as we can. No point in calling * any alarms, they might as well run out * of memory (the risk is very high, so we * do NOT risk that). If we have a message of * more than 1 byte (what I guess), we simply * overwrite the last character. * rgerhards 2005-07-22 */ if(len > 1) { *(msg+len-1) = '\n'; } else { /* we simply can not do anything in * this case (its an error anyhow...). */ } } else { /* we got memory, so we can copy the message */ memcpy(buf, msg, len); /* do not copy '\0' */ *(buf+len) = '\n'; *(buf+len+1) = '\0'; msg = buf; /* use new one */ ++len; /* care for the \n */ } } } else { /* Octect-Counting * In this case, we need to always allocate a buffer. This is because * we need to put a header in front of the message text */ char szLenBuf[16]; int iLenBuf; /* important: the printf-mask is "%d" because there must be a * space after the len! *//* The chairs of the IETF syslog-sec WG have announced that it is * consensus to do the octet count on the SYSLOG-MSG part only. I am * now changing the code to reflect this. Hopefully, it will not change * once again (there can no compatibility layer programmed for this). * To be on the save side, I just comment the code out. I mark these * comments with "IETF20061218". * rgerhards, 2006-12-19 */ iLenBuf = snprintf(szLenBuf, sizeof(szLenBuf)/sizeof(char), "%d ", (int) len); /* IETF20061218 iLenBuf = snprintf(szLenBuf, sizeof(szLenBuf)/sizeof(char), "%d ", len + iLenBuf);*/ if((buf = malloc((len + iLenBuf) * sizeof(char))) == NULL) { /* we are out of memory. This is an extreme situation. We do not * call any alarm handlers because they most likely run out of mem, * too. We are brave enough to call debug output, though. Other than * that, there is nothing left to do. We can not sent the message (as * in case of the other framing, because the message is incomplete. * We could, however, send two chunks (header and text separate), but * that would cause a lot of complexity in the code. So we think it * is appropriate enough to just make sure we do not crash in this * very unlikely case. For this, it is justified just to loose * the message. Rgerhards, 2006-12-07 */ dprintf("Error: out of memory when building TCP octet-counted " "frame. Message is lost, trying to continue.\n"); return 0; } memcpy(buf, szLenBuf, iLenBuf); /* header */ memcpy(buf + iLenBuf, msg, len); /* message */ len += iLenBuf; /* new message size */ msg = buf; /* set message buffer */ } /* frame building complete, on to actual sending */ lenSend = send(f->f_file, msg, len, 0); dprintf("TCP sent %d bytes, requested %d, msg: '%s'\n", lenSend, len, bIsCompressed ? "***compressed***" : msg); if(lenSend == len) { /* all well */ if(buf != NULL) { free(buf); } return 0; } else if(lenSend != -1) { /* no real error, could "just" not send everything... * For the time being, we ignore this... * rgerhards, 2005-10-25 */ dprintf("message not completely (tcp)send, ignoring %d\n", lenSend); # if USE_PTHREADS usleep(1000); /* experimental - might be benefitial in this situation */ # endif if(buf != NULL) free(buf); return 0; } switch(errno) { case EMSGSIZE: dprintf("message not (tcp)send, too large\n"); /* This is not a real error, so it is not flagged as one */ if(buf != NULL) free(buf); return 0; break; case EINPROGRESS: case EAGAIN: dprintf("message not (tcp)send, would block\n"); # if USE_PTHREADS usleep(1000); /* experimental - might be benefitial in this situation */ # endif /* we loose this message, but that's better than loosing * all ;) */ /* This is not a real error, so it is not flagged as one */ if(buf != NULL) free(buf); return 0; break; default: f_type = f->f_type; f->f_type = F_UNUSED; logerror("message not (tcp)send"); f->f_type = f_type; break; } if(retry == 0) { ++retry; /* try to recover */ close(f->f_file); TCPSendSetStatus(f, TCP_SEND_NOTCONNECTED); f->f_file = -1; } else { if(buf != NULL) free(buf); return -1; } } while(!done); /* warning: do ... while() */ /*NOT REACHED*/ if(buf != NULL) free(buf); return -1; /* only to avoid compiler warning! */ } #endif /******************************************************************** * ### END OF SYSLOG/TCP CODE ### ********************************************************************/ /* get the syslog forward port from selector_t. The passed in * struct must be one that is setup for forwarding. * rgerhards, 2007-06-28 * TODO: We may change the implementation to try to lookup the port * if it is unspecified. So far, we use the IANA default auf 514. */ static char *getFwdSyslogPt(selector_t *f) { assert(f != NULL); if(f->f_un.f_forw.port == NULL) return("514"); else return(f->f_un.f_forw.port); } /******************************************************************* * BEGIN CODE-LIBLOGGING * ******************************************************************* * Code in this section is borrowed from liblogging. This is an * interim solution. Once liblogging is fully integrated, this is * to be removed (see http://www.monitorware.com/liblogging for * more details. 2004-11-16 rgerhards * * Please note that the orginal liblogging code is modified so that * it fits into the context of the current version of syslogd.c. * * DO NOT PUT ANY OTHER CODE IN THIS BEGIN ... END BLOCK!!!! */ #define FALSE 0 #define TRUE 1 /** * Parse a 32 bit integer number from a string. * * \param ppsz Pointer to the Pointer to the string being parsed. It * must be positioned at the first digit. Will be updated * so that on return it points to the first character AFTER * the integer parsed. * \retval The number parsed. */ static int srSLMGParseInt32(char** ppsz) { int i; i = 0; while(isdigit((int) **ppsz)) { i = i * 10 + **ppsz - '0'; ++(*ppsz); } return i; } /** * Parse a TIMESTAMP-3339. * updates the parse pointer position. */ static int srSLMGParseTIMESTAMP3339(struct syslogTime *pTime, char** ppszTS) { char *pszTS = *ppszTS; assert(pTime != NULL); assert(ppszTS != NULL); assert(pszTS != NULL); pTime->year = srSLMGParseInt32(&pszTS); /* We take the liberty to accept slightly malformed timestamps e.g. in * the format of 2003-9-1T1:0:0. This doesn't hurt on receiving. Of course, * with the current state of affairs, we would never run into this code * here because at postion 11, there is no "T" in such cases ;) */ if(*pszTS++ != '-') return FALSE; pTime->month = srSLMGParseInt32(&pszTS); if(pTime->month < 1 || pTime->month > 12) return FALSE; if(*pszTS++ != '-') return FALSE; pTime->day = srSLMGParseInt32(&pszTS); if(pTime->day < 1 || pTime->day > 31) return FALSE; if(*pszTS++ != 'T') return FALSE; pTime->hour = srSLMGParseInt32(&pszTS); if(pTime->hour < 0 || pTime->hour > 23) return FALSE; if(*pszTS++ != ':') return FALSE; pTime->minute = srSLMGParseInt32(&pszTS); if(pTime->minute < 0 || pTime->minute > 59) return FALSE; if(*pszTS++ != ':') return FALSE; pTime->second = srSLMGParseInt32(&pszTS); if(pTime->second < 0 || pTime->second > 60) return FALSE; /* Now let's see if we have secfrac */ if(*pszTS == '.') { char *pszStart = ++pszTS; pTime->secfrac = srSLMGParseInt32(&pszTS); pTime->secfracPrecision = (int) (pszTS - pszStart); } else { pTime->secfracPrecision = 0; pTime->secfrac = 0; } /* check the timezone */ if(*pszTS == 'Z') { pszTS++; /* eat Z */ pTime->OffsetMode = 'Z'; pTime->OffsetHour = 0; pTime->OffsetMinute = 0; } else if((*pszTS == '+') || (*pszTS == '-')) { pTime->OffsetMode = *pszTS; pszTS++; pTime->OffsetHour = srSLMGParseInt32(&pszTS); if(pTime->OffsetHour < 0 || pTime->OffsetHour > 23) return FALSE; if(*pszTS++ != ':') return FALSE; pTime->OffsetMinute = srSLMGParseInt32(&pszTS); if(pTime->OffsetMinute < 0 || pTime->OffsetMinute > 59) return FALSE; } else /* there MUST be TZ information */ return FALSE; /* OK, we actually have a 3339 timestamp, so let's indicated this */ if(*pszTS == ' ') ++pszTS; else return FALSE; /* update parse pointer */ *ppszTS = pszTS; return TRUE; } /** * Parse a TIMESTAMP-3164. * Returns TRUE on parse OK, FALSE on parse error. */ static int srSLMGParseTIMESTAMP3164(struct syslogTime *pTime, char* pszTS) { assert(pTime != NULL); assert(pszTS != NULL); getCurrTime(pTime); /* obtain the current year and UTC offsets! */ /* If we look at the month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec), * we may see the following character sequences occur: * * J(an/u(n/l)), Feb, Ma(r/y), A(pr/ug), Sep, Oct, Nov, Dec * * We will use this for parsing, as it probably is the * fastest way to parse it. * * 2005-07-18, well sometimes it pays to be a bit more verbose, even in C... * Fixed a bug that lead to invalid detection of the data. The issue was that * we had an if(++pszTS == 'x') inside of some of the consturcts below. However, * there were also some elseifs (doing the same ++), which than obviously did not * check the orginal character but the next one. Now removed the ++ and put it * into the statements below. Was a really nasty bug... I didn't detect it before * june, when it first manifested. This also lead to invalid parsing of the rest * of the message, as the time stamp was not detected to be correct. - rgerhards */ switch(*pszTS++) { case 'J': if(*pszTS == 'a') { ++pszTS; if(*pszTS == 'n') { ++pszTS; pTime->month = 1; } else return FALSE; } else if(*pszTS == 'u') { ++pszTS; if(*pszTS == 'n') { ++pszTS; pTime->month = 6; } else if(*pszTS == 'l') { ++pszTS; pTime->month = 7; } else return FALSE; } else return FALSE; break; case 'F': if(*pszTS == 'e') { ++pszTS; if(*pszTS == 'b') { ++pszTS; pTime->month = 2; } else return FALSE; } else return FALSE; break; case 'M': if(*pszTS == 'a') { ++pszTS; if(*pszTS == 'r') { ++pszTS; pTime->month = 3; } else if(*pszTS == 'y') { ++pszTS; pTime->month = 5; } else return FALSE; } else return FALSE; break; case 'A': if(*pszTS == 'p') { ++pszTS; if(*pszTS == 'r') { ++pszTS; pTime->month = 4; } else return FALSE; } else if(*pszTS == 'u') { ++pszTS; if(*pszTS == 'g') { ++pszTS; pTime->month = 8; } else return FALSE; } else return FALSE; break; case 'S': if(*pszTS == 'e') { ++pszTS; if(*pszTS == 'p') { ++pszTS; pTime->month = 9; } else return FALSE; } else return FALSE; break; case 'O': if(*pszTS == 'c') { ++pszTS; if(*pszTS == 't') { ++pszTS; pTime->month = 10; } else return FALSE; } else return FALSE; break; case 'N': if(*pszTS == 'o') { ++pszTS; if(*pszTS == 'v') { ++pszTS; pTime->month = 11; } else return FALSE; } else return FALSE; break; case 'D': if(*pszTS == 'e') { ++pszTS; if(*pszTS == 'c') { ++pszTS; pTime->month = 12; } else return FALSE; } else return FALSE; break; default: return FALSE; } /* done month */ if(*pszTS++ != ' ') return FALSE; /* we accept a slightly malformed timestamp when receiving. This is * we accept one-digit days */ if(*pszTS == ' ') ++pszTS; pTime->day = srSLMGParseInt32(&pszTS); if(pTime->day < 1 || pTime->day > 31) return FALSE; if(*pszTS++ != ' ') return FALSE; pTime->hour = srSLMGParseInt32(&pszTS); if(pTime->hour < 0 || pTime->hour > 23) return FALSE; if(*pszTS++ != ':') return FALSE; pTime->minute = srSLMGParseInt32(&pszTS); if(pTime->minute < 0 || pTime->minute > 59) return FALSE; if(*pszTS++ != ':') return FALSE; pTime->second = srSLMGParseInt32(&pszTS); if(pTime->second < 0 || pTime->second > 60) return FALSE; if(*pszTS++ != ':') /* OK, we actually have a 3164 timestamp, so let's indicate this * and fill the rest of the properties. */ pTime->timeType = 1; pTime->secfracPrecision = 0; pTime->secfrac = 0; return TRUE; } /******************************************************************* * END CODE-LIBLOGGING * *******************************************************************/ /** * Format a syslogTimestamp into format required by MySQL. * We are using the 14 digits format. For example 20041111122600 * is interpreted as '2004-11-11 12:26:00'. * The caller must provide the timestamp as well as a character * buffer that will receive the resulting string. The function * returns the size of the timestamp written in bytes (without * the string terminator). If 0 is returend, an error occured. */ static int formatTimestampToMySQL(struct syslogTime *ts, char* pDst, size_t iLenDst) { /* currently we do not consider localtime/utc. This may later be * added. If so, I recommend using a property replacer option * and/or a global configuration option. However, we should wait * on user requests for this feature before doing anything. * rgerhards, 2007-06-26 */ assert(ts != NULL); assert(pDst != NULL); if (iLenDst < 15) /* we need at least 14 bytes 14 digits for timestamp + '\n' */ return(0); return(snprintf(pDst, iLenDst, "%4.4d%2.2d%2.2d%2.2d%2.2d%2.2d", ts->year, ts->month, ts->day, ts->hour, ts->minute, ts->second)); } /** * Format a syslogTimestamp to a RFC3339 timestamp string (as * specified in syslog-protocol). * The caller must provide the timestamp as well as a character * buffer that will receive the resulting string. The function * returns the size of the timestamp written in bytes (without * the string terminator). If 0 is returend, an error occured. */ static int formatTimestamp3339(struct syslogTime *ts, char* pBuf, size_t iLenBuf) { int iRet; char szTZ[7]; /* buffer for TZ information */ assert(ts != NULL); assert(pBuf != NULL); if(iLenBuf < 20) return(0); /* we NEED at least 20 bytes */ /* do TZ information first, this is easier to take care of "Z" zone in rfc3339 */ if(ts->OffsetMode == 'Z') { szTZ[0] = 'Z'; szTZ[1] = '\0'; } else { snprintf(szTZ, sizeof(szTZ) / sizeof(char), "%c%2.2d:%2.2d", ts->OffsetMode, ts->OffsetHour, ts->OffsetMinute); } if(ts->secfracPrecision > 0) { /* we now need to include fractional seconds. While doing so, we must look at * the precision specified. For example, if we have millisec precision (3 digits), a * secFrac value of 12 is not equivalent to ".12" but ".012". Obviously, this * is a huge difference ;). To avoid this, we first create a format string with * the specific precision and *then* use that format string to do the actual * formating (mmmmhhh... kind of self-modifying code... ;)). */ char szFmtStr[64]; /* be careful: there is ONE actual %d in the format string below ;) */ snprintf(szFmtStr, sizeof(szFmtStr), "%%04d-%%02d-%%02dT%%02d:%%02d:%%02d.%%0%dd%%s", ts->secfracPrecision); iRet = snprintf(pBuf, iLenBuf, szFmtStr, ts->year, ts->month, ts->day, ts->hour, ts->minute, ts->second, ts->secfrac, szTZ); } else iRet = snprintf(pBuf, iLenBuf, "%4.4d-%2.2d-%2.2dT%2.2d:%2.2d:%2.2d%s", ts->year, ts->month, ts->day, ts->hour, ts->minute, ts->second, szTZ); return(iRet); } /** * Format a syslogTimestamp to a RFC3164 timestamp sring. * The caller must provide the timestamp as well as a character * buffer that will receive the resulting string. The function * returns the size of the timestamp written in bytes (without * the string termnator). If 0 is returend, an error occured. */ static int formatTimestamp3164(struct syslogTime *ts, char* pBuf, size_t iLenBuf) { static char* monthNames[13] = {"ERR", "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; assert(ts != NULL); assert(pBuf != NULL); if(iLenBuf < 16) return(0); /* we NEED 16 bytes */ return(snprintf(pBuf, iLenBuf, "%s %2d %2.2d:%2.2d:%2.2d", monthNames[ts->month], ts->day, ts->hour, ts->minute, ts->second )); } /** * Format a syslogTimestamp to a text format. * The caller must provide the timestamp as well as a character * buffer that will receive the resulting string. The function * returns the size of the timestamp written in bytes (without * the string termnator). If 0 is returend, an error occured. */ #if 0 /* This method is currently not called, be we like to preserve it */ static int formatTimestamp(struct syslogTime *ts, char* pBuf, size_t iLenBuf) { assert(ts != NULL); assert(pBuf != NULL); if(ts->timeType == 1) { return(formatTimestamp3164(ts, pBuf, iLenBuf)); } if(ts->timeType == 2) { return(formatTimestamp3339(ts, pBuf, iLenBuf)); } return(0); } #endif /** * Get the current date/time in the best resolution the operating * system has to offer (well, actually at most down to the milli- * second level. * * The date and time is returned in separate fields as this is * most portable and removes the need for additional structures * (but I have to admit it is somewhat "bulky";)). * * Obviously, all caller-provided pointers must not be NULL... */ static void getCurrTime(struct syslogTime *t) { struct timeval tp; struct tm *tm; long lBias; assert(t != NULL); gettimeofday(&tp, NULL); tm = localtime((time_t*) &(tp.tv_sec)); t->year = tm->tm_year + 1900; t->month = tm->tm_mon + 1; t->day = tm->tm_mday; t->hour = tm->tm_hour; t->minute = tm->tm_min; t->second = tm->tm_sec; t->secfrac = tp.tv_usec; t->secfracPrecision = 6; # if __sun /* Solaris uses a different method of exporting the time zone. * It is UTC - localtime, which is the opposite sign of mins east of GMT. */ lBias = -(daylight ? altzone : timezone); # else lBias = tm->tm_gmtoff; # endif if(lBias < 0) { t->OffsetMode = '-'; lBias *= -1; } else t->OffsetMode = '+'; t->OffsetHour = lBias / 3600; t->OffsetMinute = lBias % 3600; } /* Decode a priority into textual information like auth.emerg. * The variable pRes must point to a user-supplied buffer and * pResLen must contain its size. The pointer to the buffer * is also returned, what makes this functiona suitable for * use in printf-like functions. * Note: a buffer size of 20 characters is always sufficient. * Interface to this function changed 2007-06-15 by RGerhards */ char *textpri(char *pRes, size_t pResLen, int pri) { CODE *c_pri, *c_fac; assert(pRes != NULL); assert(pResLen > 0); for (c_fac = facilitynames; c_fac->c_name && !(c_fac->c_val == LOG_FAC(pri)<<3); c_fac++); for (c_pri = prioritynames; c_pri->c_name && !(c_pri->c_val == LOG_PRI(pri)); c_pri++); snprintf (pRes, pResLen, "%s.%s<%d>", c_fac->c_name, c_pri->c_name, pri); return pRes; } /* rgerhards 2004-11-09: helper routines for handling the * message object. We do only the most important things. It * is our firm hope that this will sooner or later be * obsoleted by liblogging. */ /* "Constructor" for a msg "object". Returns a pointer to * the new object or NULL if no such object could be allocated. * An object constructed via this function should only be destroyed * via "MsgDestruct()". */ static msg_t* MsgConstruct() { msg_t *pM; if((pM = calloc(1, sizeof(msg_t))) != NULL) { /* initialize members that are non-zero */ pM->iRefCount = 1; pM->iSyslogVers = -1; pM->iSeverity = -1; pM->iFacility = -1; getCurrTime(&(pM->tRcvdAt)); } /* DEV debugging only! dprintf("MsgConstruct\t0x%x, ref 1\n", (int)pM);*/ return(pM); } /* Destructor for a msg "object". Must be called to dispose * of a msg object. */ static void MsgDestruct(msg_t * pM) { assert(pM != NULL); /* DEV Debugging only ! dprintf("MsgDestruct\t0x%x, Ref now: %d\n", (int)pM, pM->iRefCount - 1); */ if(--pM->iRefCount == 0) { /* DEV Debugging Only! dprintf("MsgDestruct\t0x%x, RefCount now 0, doing DESTROY\n", (int)pM); */ if(pM->pszUxTradMsg != NULL) free(pM->pszUxTradMsg); if(pM->pszRawMsg != NULL) free(pM->pszRawMsg); if(pM->pszTAG != NULL) free(pM->pszTAG); if(pM->pszHOSTNAME != NULL) free(pM->pszHOSTNAME); if(pM->pszRcvFrom != NULL) free(pM->pszRcvFrom); if(pM->pszMSG != NULL) free(pM->pszMSG); if(pM->pszFacility != NULL) free(pM->pszFacility); if(pM->pszFacilityStr != NULL) free(pM->pszFacilityStr); if(pM->pszSeverity != NULL) free(pM->pszSeverity); if(pM->pszSeverityStr != NULL) free(pM->pszSeverityStr); if(pM->pszRcvdAt3164 != NULL) free(pM->pszRcvdAt3164); if(pM->pszRcvdAt3339 != NULL) free(pM->pszRcvdAt3339); if(pM->pszRcvdAt_MySQL != NULL) free(pM->pszRcvdAt_MySQL); if(pM->pszTIMESTAMP3164 != NULL) free(pM->pszTIMESTAMP3164); if(pM->pszTIMESTAMP3339 != NULL) free(pM->pszTIMESTAMP3339); if(pM->pszTIMESTAMP_MySQL != NULL) free(pM->pszTIMESTAMP_MySQL); if(pM->pszPRI != NULL) free(pM->pszPRI); free(pM); } } /* The macros below are used in MsgDup(). I use macros * to keep the fuction code somewhat more readyble. It is my * replacement for inline functions in CPP */ #define tmpCOPYSZ(name) \ if(pOld->psz##name != NULL) { \ if((pNew->psz##name = srUtilStrDup(pOld->psz##name, pOld->iLen##name)) == NULL) {\ MsgDestruct(pNew);\ return NULL;\ }\ pNew->iLen##name = pOld->iLen##name;\ } /* copy the CStr objects. * if the old value is NULL, we do not need to do anything because we * initialized the new value to NULL via calloc(). */ #define tmpCOPYCSTR(name) \ if(pOld->pCS##name != NULL) {\ if(rsCStrConstructFromCStr(&(pNew->pCS##name), pOld->pCS##name) != RS_RET_OK) {\ MsgDestruct(pNew);\ return NULL;\ }\ } /* Constructs a message object by duplicating another one. * Returns NULL if duplication failed. * rgerhards, 2007-07-10 */ static msg_t* MsgDup(msg_t* pOld) { msg_t* pNew; assert(pOld != NULL); if((pNew = (msg_t*) calloc(1, sizeof(msg_t))) == NULL) { glblHadMemShortage = 1; return NULL; } /* now copy the message properties */ pNew->iRefCount = 1; pNew->iSyslogVers = pOld->iSyslogVers; pNew->bParseHOSTNAME = pOld->bParseHOSTNAME; pNew->iSeverity = pOld->iSeverity; pNew->iFacility = pOld->iFacility; pNew->bParseHOSTNAME = pOld->bParseHOSTNAME; pNew->msgFlags = pOld->msgFlags; pNew->iProtocolVersion = pOld->iProtocolVersion; memcpy(&pNew->tRcvdAt, &pOld->tRcvdAt, sizeof(struct syslogTime)); memcpy(&pNew->tTIMESTAMP, &pOld->tTIMESTAMP, sizeof(struct syslogTime)); tmpCOPYSZ(Severity); tmpCOPYSZ(SeverityStr); tmpCOPYSZ(Facility); tmpCOPYSZ(FacilityStr); tmpCOPYSZ(PRI); tmpCOPYSZ(RawMsg); tmpCOPYSZ(MSG); tmpCOPYSZ(UxTradMsg); tmpCOPYSZ(TAG); tmpCOPYSZ(HOSTNAME); tmpCOPYSZ(RcvFrom); tmpCOPYCSTR(ProgName); tmpCOPYCSTR(StrucData); tmpCOPYCSTR(APPNAME); tmpCOPYCSTR(PROCID); tmpCOPYCSTR(MSGID); /* we do not copy all other cache properties, as we do not even know * if they are needed once again. So we let them re-create if needed. */ return pNew; } #undef tmpCOPYSZ #undef tmpCOPYCSTR /* Increment reference count - see description of the "msg" * structure for details. As a convenience to developers, * this method returns the msg pointer that is passed to it. * It is recommended that it is called as follows: * * pSecondMsgPointer = MsgAddRef(pOrgMsgPointer); */ static msg_t *MsgAddRef(msg_t *pM) { assert(pM != NULL); pM->iRefCount++; /* DEV debugging only! dprintf("MsgAddRef\t0x%x done, Ref now: %d\n", (int)pM, pM->iRefCount);*/ return(pM); } /* Access methods - dumb & easy, not a comment for each ;) */ static void setProtocolVersion(msg_t *pM, int iNewVersion) { assert(pM != NULL); if(iNewVersion != 0 && iNewVersion != 1) { dprintf("Tried to set unsupported protocol version %d - changed to 0.\n", iNewVersion); iNewVersion = 0; } pM->iProtocolVersion = iNewVersion; } static int getProtocolVersion(msg_t *pM) { assert(pM != NULL); return(pM->iProtocolVersion); } /* note: string is taken from constant pool, do NOT free */ static char *getProtocolVersionString(msg_t *pM) { assert(pM != NULL); return(pM->iProtocolVersion ? "1" : "0"); } static int getMSGLen(msg_t *pM) { return((pM == NULL) ? 0 : pM->iLenMSG); } static char *getRawMsg(msg_t *pM) { if(pM == NULL) return ""; else if(pM->pszRawMsg == NULL) return ""; else return (char*)pM->pszRawMsg; } static char *getUxTradMsg(msg_t *pM) { if(pM == NULL) return ""; else if(pM->pszUxTradMsg == NULL) return ""; else return (char*)pM->pszUxTradMsg; } static char *getMSG(msg_t *pM) { if(pM == NULL) return ""; else if(pM->pszMSG == NULL) return ""; else return (char*)pM->pszMSG; } /* Get PRI value in text form */ static char *getPRI(msg_t *pM) { if(pM == NULL) return ""; if(pM->pszPRI == NULL) { /* OK, we need to construct it... * we use a 5 byte buffer - as of * RFC 3164, it can't be longer. Should it * still be, snprintf will truncate... */ if((pM->pszPRI = malloc(5)) == NULL) return ""; pM->iLenPRI = snprintf((char*)pM->pszPRI, 5, "%d", LOG_MAKEPRI(pM->iFacility, pM->iSeverity)); } return (char*)pM->pszPRI; } /* Get PRI value as integer */ static int getPRIi(msg_t *pM) { assert(pM != NULL); return (pM->iFacility << 3) + (pM->iSeverity); } static char *getTimeReported(msg_t *pM, enum tplFormatTypes eFmt) { if(pM == NULL) return ""; switch(eFmt) { case tplFmtDefault: if(pM->pszTIMESTAMP3164 == NULL) { if((pM->pszTIMESTAMP3164 = malloc(16)) == NULL) return ""; formatTimestamp3164(&pM->tTIMESTAMP, pM->pszTIMESTAMP3164, 16); } return(pM->pszTIMESTAMP3164); case tplFmtMySQLDate: if(pM->pszTIMESTAMP_MySQL == NULL) { if((pM->pszTIMESTAMP_MySQL = malloc(15)) == NULL) return ""; formatTimestampToMySQL(&pM->tTIMESTAMP, pM->pszTIMESTAMP_MySQL, 15); } return(pM->pszTIMESTAMP_MySQL); case tplFmtRFC3164Date: if(pM->pszTIMESTAMP3164 == NULL) { if((pM->pszTIMESTAMP3164 = malloc(16)) == NULL) return ""; formatTimestamp3164(&pM->tTIMESTAMP, pM->pszTIMESTAMP3164, 16); } return(pM->pszTIMESTAMP3164); case tplFmtRFC3339Date: if(pM->pszTIMESTAMP3339 == NULL) { if((pM->pszTIMESTAMP3339 = malloc(33)) == NULL) return ""; formatTimestamp3339(&pM->tTIMESTAMP, pM->pszTIMESTAMP3339, 33); } return(pM->pszTIMESTAMP3339); } return "INVALID eFmt OPTION!"; } static char *getTimeGenerated(msg_t *pM, enum tplFormatTypes eFmt) { if(pM == NULL) return ""; switch(eFmt) { case tplFmtDefault: if(pM->pszRcvdAt3164 == NULL) { if((pM->pszRcvdAt3164 = malloc(16)) == NULL) return ""; formatTimestamp3164(&pM->tRcvdAt, pM->pszRcvdAt3164, 16); } return(pM->pszRcvdAt3164); case tplFmtMySQLDate: if(pM->pszRcvdAt_MySQL == NULL) { if((pM->pszRcvdAt_MySQL = malloc(15)) == NULL) return ""; formatTimestampToMySQL(&pM->tRcvdAt, pM->pszRcvdAt_MySQL, 15); } return(pM->pszRcvdAt_MySQL); case tplFmtRFC3164Date: if((pM->pszRcvdAt3164 = malloc(16)) == NULL) return ""; formatTimestamp3164(&pM->tRcvdAt, pM->pszRcvdAt3164, 16); return(pM->pszRcvdAt3164); case tplFmtRFC3339Date: if(pM->pszRcvdAt3339 == NULL) { if((pM->pszRcvdAt3339 = malloc(33)) == NULL) return ""; formatTimestamp3339(&pM->tRcvdAt, pM->pszRcvdAt3339, 33); } return(pM->pszRcvdAt3339); } return "INVALID eFmt OPTION!"; } char *getSeverity(msg_t *pM) { if(pM == NULL) return ""; if(pM->pszSeverity == NULL) { /* we use a 2 byte buffer - can only be one digit */ if((pM->pszSeverity = malloc(2)) == NULL) return ""; pM->iLenSeverity = snprintf((char*)pM->pszSeverity, 2, "%d", pM->iSeverity); } return((char*)pM->pszSeverity); } static char *getSeverityStr(msg_t *pM) { CODE *c; int val; char *name = NULL; if(pM == NULL) return ""; if(pM->pszSeverityStr == NULL) { for(c = prioritynames, val = pM->iSeverity; c->c_name; c++) if(c->c_val == val) { name = c->c_name; break; } if(name == NULL) { /* we use a 2 byte buffer - can only be one digit */ if((pM->pszSeverityStr = malloc(2)) == NULL) return ""; pM->iLenSeverityStr = snprintf(pM->pszSeverityStr, 2, "%d", pM->iSeverity); } else { if((pM->pszSeverityStr = strdup(name)) == NULL) return ""; pM->iLenSeverityStr = strlen(name); } } return(pM->pszSeverityStr); } static char *getFacility(msg_t *pM) { if(pM == NULL) return ""; if(pM->pszFacility == NULL) { /* we use a 12 byte buffer - as of * syslog-protocol, facility can go * up to 2^32 -1 */ if((pM->pszFacility = malloc(12)) == NULL) return ""; pM->iLenFacility = snprintf((char*)pM->pszFacility, 12, "%d", pM->iFacility); } return((char*)pM->pszFacility); } static char *getFacilityStr(msg_t *pM) { CODE *c; int val; char *name = NULL; if(pM == NULL) return ""; if(pM->pszFacilityStr == NULL) { for(c = facilitynames, val = pM->iFacility << 3; c->c_name; c++) if(c->c_val == val) { name = c->c_name; break; } if(name == NULL) { /* we use a 12 byte buffer - as of * syslog-protocol, facility can go * up to 2^32 -1 */ if((pM->pszFacilityStr = malloc(12)) == NULL) return ""; pM->iLenFacilityStr = snprintf(pM->pszFacilityStr, 12, "%d", val >> 3); } else { if((pM->pszFacilityStr = strdup(name)) == NULL) return ""; pM->iLenFacilityStr = strlen(name); } } return(pM->pszFacilityStr); } /* rgerhards 2004-11-24: set APP-NAME in msg object */ static rsRetVal MsgSetAPPNAME(msg_t *pMsg, char* pszAPPNAME) { assert(pMsg != NULL); if(pMsg->pCSAPPNAME == NULL) { /* we need to obtain the object first */ if((pMsg->pCSAPPNAME = rsCStrConstruct()) == NULL) return RS_RET_OBJ_CREATION_FAILED; /* best we can do... */ rsCStrSetAllocIncrement(pMsg->pCSAPPNAME, 128); } /* if we reach this point, we have the object */ return rsCStrSetSzStr(pMsg->pCSAPPNAME, (uchar*) pszAPPNAME); } /* This function tries to emulate APPNAME if it is not present. Its * main use is when we have received a log record via legacy syslog and * now would like to send out the same one via syslog-protocol. */ static void tryEmulateAPPNAME(msg_t *pM) { assert(pM != NULL); if(pM->pCSAPPNAME != NULL) return; /* we are already done */ if(getProtocolVersion(pM) == 0) { /* only then it makes sense to emulate */ MsgSetAPPNAME(pM, getProgramName(pM)); } } /* rgerhards, 2005-11-24 */ static int getAPPNAMELen(msg_t *pM) { assert(pM != NULL); if(pM->pCSAPPNAME == NULL) tryEmulateAPPNAME(pM); return (pM->pCSAPPNAME == NULL) ? 0 : rsCStrLen(pM->pCSAPPNAME); } /* rgerhards, 2005-11-24 */ static char *getAPPNAME(msg_t *pM) { assert(pM != NULL); if(pM->pCSAPPNAME == NULL) tryEmulateAPPNAME(pM); return (pM->pCSAPPNAME == NULL) ? "" : (char*) rsCStrGetSzStrNoNULL(pM->pCSAPPNAME); } /* rgerhards 2004-11-24: set PROCID in msg object */ static rsRetVal MsgSetPROCID(msg_t *pMsg, char* pszPROCID) { assert(pMsg != NULL); if(pMsg->pCSPROCID == NULL) { /* we need to obtain the object first */ if((pMsg->pCSPROCID = rsCStrConstruct()) == NULL) return RS_RET_OBJ_CREATION_FAILED; /* best we can do... */ rsCStrSetAllocIncrement(pMsg->pCSPROCID, 128); } /* if we reach this point, we have the object */ return rsCStrSetSzStr(pMsg->pCSPROCID, (uchar*) pszPROCID); } /* rgerhards, 2005-11-24 */ static int getPROCIDLen(msg_t *pM) { assert(pM != NULL); if(pM->pCSPROCID == NULL) aquirePROCIDFromTAG(pM); return (pM->pCSPROCID == NULL) ? 1 : rsCStrLen(pM->pCSPROCID); } /* rgerhards, 2005-11-24 */ static char *getPROCID(msg_t *pM) { assert(pM != NULL); if(pM->pCSPROCID == NULL) aquirePROCIDFromTAG(pM); return (pM->pCSPROCID == NULL) ? "-" : (char*) rsCStrGetSzStrNoNULL(pM->pCSPROCID); } /* rgerhards 2004-11-24: set MSGID in msg object */ static rsRetVal MsgSetMSGID(msg_t *pMsg, char* pszMSGID) { assert(pMsg != NULL); if(pMsg->pCSMSGID == NULL) { /* we need to obtain the object first */ if((pMsg->pCSMSGID = rsCStrConstruct()) == NULL) return RS_RET_OBJ_CREATION_FAILED; /* best we can do... */ rsCStrSetAllocIncrement(pMsg->pCSMSGID, 128); } /* if we reach this point, we have the object */ return rsCStrSetSzStr(pMsg->pCSMSGID, (uchar*) pszMSGID); } /* rgerhards, 2005-11-24 */ #if 0 /* This method is currently not called, be we like to preserve it */ static int getMSGIDLen(msg_t *pM) { return (pM->pCSMSGID == NULL) ? 1 : rsCStrLen(pM->pCSMSGID); } #endif /* rgerhards, 2005-11-24 */ static char *getMSGID(msg_t *pM) { return (pM->pCSMSGID == NULL) ? "-" : (char*) rsCStrGetSzStrNoNULL(pM->pCSMSGID); } /* Set the TAG to a caller-provided string. This is thought * to be a heap buffer that the caller will no longer use. This * function is a performance optimization over MsgSetTAG(). * rgerhards 2004-11-19 */ static void MsgAssignTAG(msg_t *pMsg, char *pBuf) { assert(pMsg != NULL); pMsg->iLenTAG = (pBuf == NULL) ? 0 : strlen(pBuf); pMsg->pszTAG = (uchar*) pBuf; } /* rgerhards 2004-11-16: set TAG in msg object */ static void MsgSetTAG(msg_t *pMsg, char* pszTAG) { assert(pMsg != NULL); if(pMsg->pszTAG != NULL) free(pMsg->pszTAG); pMsg->iLenTAG = strlen(pszTAG); if((pMsg->pszTAG = malloc(pMsg->iLenTAG + 1)) != NULL) memcpy(pMsg->pszTAG, pszTAG, pMsg->iLenTAG + 1); else dprintf("Could not allocate memory in MsgSetTAG()\n"); } /* This function tries to emulate the TAG if none is * set. Its primary purpose is to provide an old-style TAG * when a syslog-protocol message has been received. Then, * the tag is APP-NAME "[" PROCID "]". The function first checks * if there is a TAG and, if not, if it can emulate it. * rgerhards, 2005-11-24 */ static void tryEmulateTAG(msg_t *pM) { int iTAGLen; char *pBuf; assert(pM != NULL); if(pM->pszTAG != NULL) return; /* done, no need to emulate */ if(getProtocolVersion(pM) == 1) { if(!strcmp(getPROCID(pM), "-")) { /* no process ID, use APP-NAME only */ MsgSetTAG(pM, getAPPNAME(pM)); } else { /* now we can try to emulate */ iTAGLen = getAPPNAMELen(pM) + getPROCIDLen(pM) + 3; if((pBuf = malloc(iTAGLen * sizeof(char))) == NULL) return; /* nothing we can do */ snprintf(pBuf, iTAGLen, "%s[%s]", getAPPNAME(pM), getPROCID(pM)); MsgAssignTAG(pM, pBuf); } } } #if 0 /* This method is currently not called, be we like to preserve it */ static int getTAGLen(msg_t *pM) { if(pM == NULL) return 0; else { tryEmulateTAG(pM); if(pM->pszTAG == NULL) return 0; else return pM->iLenTAG; } } #endif static char *getTAG(msg_t *pM) { if(pM == NULL) return ""; else { tryEmulateTAG(pM); if(pM->pszTAG == NULL) return ""; else return (char*) pM->pszTAG; } } static int getHOSTNAMELen(msg_t *pM) { if(pM == NULL) return 0; else if(pM->pszHOSTNAME == NULL) return 0; else return pM->iLenHOSTNAME; } static char *getHOSTNAME(msg_t *pM) { if(pM == NULL) return ""; else if(pM->pszHOSTNAME == NULL) return ""; else return (char*) pM->pszHOSTNAME; } static char *getRcvFrom(msg_t *pM) { if(pM == NULL) return ""; else if(pM->pszRcvFrom == NULL) return ""; else return (char*) pM->pszRcvFrom; } /* rgerhards 2004-11-24: set STRUCTURED DATA in msg object */ static rsRetVal MsgSetStructuredData(msg_t *pMsg, char* pszStrucData) { assert(pMsg != NULL); if(pMsg->pCSStrucData == NULL) { /* we need to obtain the object first */ if((pMsg->pCSStrucData = rsCStrConstruct()) == NULL) return RS_RET_OBJ_CREATION_FAILED; /* best we can do... */ rsCStrSetAllocIncrement(pMsg->pCSStrucData, 128); } /* if we reach this point, we have the object */ return rsCStrSetSzStr(pMsg->pCSStrucData, (uchar*) pszStrucData); } /* get the length of the "STRUCTURED-DATA" sz string * rgerhards, 2005-11-24 */ #if 0 /* This method is currently not called, be we like to preserve it */ static int getStructuredDataLen(msg_t *pM) { return (pM->pCSStrucData == NULL) ? 1 : rsCStrLen(pM->pCSStrucData); } #endif /* get the "STRUCTURED-DATA" as sz string * rgerhards, 2005-11-24 */ static char *getStructuredData(msg_t *pM) { return (pM->pCSStrucData == NULL) ? "-" : (char*) rsCStrGetSzStrNoNULL(pM->pCSStrucData); } /* This function moves the HOSTNAME inside the message object to the * TAG. It is a specialised function used to handle the condition when * a message without HOSTNAME is being processed. The missing HOSTNAME * is only detected at a later stage, during TAG processing, so that * we already had set the HOSTNAME property and now need to move it to * the TAG. Of course, we could do this via a couple of get/set methods, * but it is far more efficient to do it via this specialised method. * This is especially important as this can be a very common case, e.g. * when BSD syslog is acting as a sender. * rgerhards, 2005-11-10. */ static void moveHOSTNAMEtoTAG(msg_t *pM) { assert(pM != NULL); if(pM->pszTAG != NULL) free(pM->pszTAG); pM->pszTAG = pM->pszHOSTNAME; pM->iLenTAG = pM->iLenHOSTNAME; pM->pszHOSTNAME = NULL; pM->iLenHOSTNAME = 0; } /* This functions tries to aquire the PROCID from TAG. Its primary use is * when a legacy syslog message has been received and should be forwarded as * syslog-protocol (or the PROCID is requested for any other reason). * In legacy syslog, the PROCID is considered to be the character sequence * between the first [ and the first ]. This usually are digits only, but we * do not check that. However, if there is no closing ], we do not assume we * can obtain a PROCID. Take in mind that not every legacy syslog message * actually has a PROCID. * rgerhards, 2005-11-24 */ static rsRetVal aquirePROCIDFromTAG(msg_t *pM) { register int i; int iRet; assert(pM != NULL); if(pM->pCSPROCID != NULL) return RS_RET_OK; /* we are already done ;) */ if(getProtocolVersion(pM) != 0) return RS_RET_OK; /* we can only emulate if we have legacy format */ /* find first '['... */ i = 0; while((i < pM->iLenTAG) && (pM->pszTAG[i] != '[')) ++i; if(!(i < pM->iLenTAG)) return RS_RET_OK; /* no [, so can not emulate... */ ++i; /* skip '[' */ /* now obtain the PROCID string... */ if((pM->pCSPROCID = rsCStrConstruct()) == NULL) return RS_RET_OBJ_CREATION_FAILED; /* best we can do... */ rsCStrSetAllocIncrement(pM->pCSPROCID, 16); while((i < pM->iLenTAG) && (pM->pszTAG[i] != ']')) { if((iRet = rsCStrAppendChar(pM->pCSPROCID, pM->pszTAG[i])) != RS_RET_OK) return iRet; ++i; } if(!(i < pM->iLenTAG)) { /* oops... it looked like we had a PROCID, but now it has * turned out this is not true. In this case, we need to free * the buffer and simply return. Note that this is NOT an error * case! */ rsCStrDestruct(pM->pCSPROCID); pM->pCSPROCID = NULL; return RS_RET_OK; } /* OK, finaally we could obtain a PROCID. So let's use it ;) */ if((iRet = rsCStrFinish(pM->pCSPROCID)) != RS_RET_OK) return iRet; return RS_RET_OK; } /* Parse and set the "programname" for a given MSG object. Programname * is a BSD concept, it is the tag without any instance-specific information. * Precisely, the programname is terminated by either (whichever occurs first): * - end of tag * - nonprintable character * - ':' * - '[' * - '/' * The above definition has been taken from the FreeBSD syslogd sources. * * The program name is not parsed by default, because it is infrequently-used. * If it is needed, this function should be called first. It checks if it is * already set and extracts it, if not. * A message object must be provided, else a crash will occur. * rgerhards, 2005-10-19 */ static rsRetVal aquireProgramName(msg_t *pM) { register int i; int iRet; assert(pM != NULL); if(pM->pCSProgName == NULL) { /* ok, we do not yet have it. So let's parse the TAG * to obtain it. */ if((pM->pCSProgName = rsCStrConstruct()) == NULL) return RS_RET_OBJ_CREATION_FAILED; /* best we can do... */ rsCStrSetAllocIncrement(pM->pCSProgName, 33); for( i = 0 ; (i < pM->iLenTAG) && isprint((int) pM->pszTAG[i]) && (pM->pszTAG[i] != '\0') && (pM->pszTAG[i] != ':') && (pM->pszTAG[i] != '[') && (pM->pszTAG[i] != '/') ; ++i) { if((iRet = rsCStrAppendChar(pM->pCSProgName, pM->pszTAG[i])) != RS_RET_OK) return iRet; } if((iRet = rsCStrFinish(pM->pCSProgName)) != RS_RET_OK) return iRet; } return RS_RET_OK; } /* get the length of the "programname" sz string * rgerhards, 2005-10-19 */ static int getProgramNameLen(msg_t *pM) { int iRet; assert(pM != NULL); if((iRet = aquireProgramName(pM)) != RS_RET_OK) { dprintf("error %d returned by aquireProgramName() in getProgramNameLen()\n", iRet); return 0; /* best we can do (consistent wiht what getProgramName() returns) */ } return (pM->pCSProgName == NULL) ? 0 : rsCStrLen(pM->pCSProgName); } /* get the "programname" as sz string * rgerhards, 2005-10-19 */ static char *getProgramName(msg_t *pM) { int iRet; assert(pM != NULL); if((iRet = aquireProgramName(pM)) != RS_RET_OK) { dprintf("error %d returned by aquireProgramName() in getProgramName()\n", iRet); return ""; /* best we can do */ } return (pM->pCSProgName == NULL) ? "" : (char*) rsCStrGetSzStrNoNULL(pM->pCSProgName); } /* rgerhards 2004-11-16: set pszRcvFrom in msg object */ static void MsgSetRcvFrom(msg_t *pMsg, char* pszRcvFrom) { assert(pMsg != NULL); if(pMsg->pszRcvFrom != NULL) free(pMsg->pszRcvFrom); pMsg->iLenRcvFrom = strlen(pszRcvFrom); if((pMsg->pszRcvFrom = malloc(pMsg->iLenRcvFrom + 1)) != NULL) { memcpy(pMsg->pszRcvFrom, pszRcvFrom, pMsg->iLenRcvFrom + 1); } } /* Set the HOSTNAME to a caller-provided string. This is thought * to be a heap buffer that the caller will no longer use. This * function is a performance optimization over MsgSetHOSTNAME(). * rgerhards 2004-11-19 */ static void MsgAssignHOSTNAME(msg_t *pMsg, char *pBuf) { assert(pMsg != NULL); assert(pBuf != NULL); pMsg->iLenHOSTNAME = strlen(pBuf); pMsg->pszHOSTNAME = (uchar*) pBuf; } /* rgerhards 2004-11-09: set HOSTNAME in msg object * rgerhards, 2007-06-21: * Does not return anything. If an error occurs, the hostname is * simply not set. I have changed this behaviour. The only problem * we can run into is memory shortage. If we have such, it is better * to loose the hostname than the full message. So we silently ignore * that problem and hope that memory will be available the next time * we need it. The rest of the code already knows how to handle an * unset HOSTNAME. */ static void MsgSetHOSTNAME(msg_t *pMsg, char* pszHOSTNAME) { assert(pMsg != NULL); if(pMsg->pszHOSTNAME != NULL) free(pMsg->pszHOSTNAME); pMsg->iLenHOSTNAME = strlen(pszHOSTNAME); if((pMsg->pszHOSTNAME = malloc(pMsg->iLenHOSTNAME + 1)) != NULL) memcpy(pMsg->pszHOSTNAME, pszHOSTNAME, pMsg->iLenHOSTNAME + 1); else dprintf("Could not allocate memory in MsgSetHOSTNAME()\n"); } /* Set the UxTradMsg to a caller-provided string. This is thought * to be a heap buffer that the caller will no longer use. This * function is a performance optimization over MsgSetUxTradMsg(). * rgerhards 2004-11-19 */ #if 0 /* This method is currently not called, be we like to preserve it */ static void MsgAssignUxTradMsg(msg_t *pMsg, char *pBuf) { assert(pMsg != NULL); assert(pBuf != NULL); pMsg->iLenUxTradMsg = strlen(pBuf); pMsg->pszUxTradMsg = pBuf; } #endif /* rgerhards 2004-11-17: set the traditional Unix message in msg object */ static int MsgSetUxTradMsg(msg_t *pMsg, char* pszUxTradMsg) { assert(pMsg != NULL); assert(pszUxTradMsg != NULL); pMsg->iLenUxTradMsg = strlen(pszUxTradMsg); if(pMsg->pszUxTradMsg != NULL) free(pMsg->pszUxTradMsg); if((pMsg->pszUxTradMsg = malloc(pMsg->iLenUxTradMsg + 1)) != NULL) memcpy(pMsg->pszUxTradMsg, pszUxTradMsg, pMsg->iLenUxTradMsg + 1); else dprintf("Could not allocate memory for pszUxTradMsg buffer."); return(0); } /* rgerhards 2004-11-09: set MSG in msg object */ static void MsgSetMSG(msg_t *pMsg, char* pszMSG) { assert(pMsg != NULL); assert(pszMSG != NULL); if(pMsg->pszMSG != NULL) free(pMsg->pszMSG); pMsg->iLenMSG = strlen(pszMSG); if((pMsg->pszMSG = malloc(pMsg->iLenMSG + 1)) != NULL) memcpy(pMsg->pszMSG, pszMSG, pMsg->iLenMSG + 1); else dprintf("MsgSetMSG could not allocate memory for pszMSG buffer."); } /* rgerhards 2004-11-11: set RawMsg in msg object */ static void MsgSetRawMsg(msg_t *pMsg, char* pszRawMsg) { assert(pMsg != NULL); if(pMsg->pszRawMsg != NULL) free(pMsg->pszRawMsg); pMsg->iLenRawMsg = strlen(pszRawMsg); if((pMsg->pszRawMsg = malloc(pMsg->iLenRawMsg + 1)) != NULL) memcpy(pMsg->pszRawMsg, pszRawMsg, pMsg->iLenRawMsg + 1); else dprintf("Could not allocate memory for pszRawMsg buffer."); } /* This function returns the current date in different * variants. It is used to construct the $NOW series of * system properties. The returned buffer must be freed * by the caller when no longer needed. If the function * can not allocate memory, it returns a NULL pointer. * Added 2007-07-10 rgerhards */ typedef enum ENOWType { NOW_NOW, NOW_YEAR, NOW_MONTH, NOW_DAY, NOW_HOUR, NOW_MINUTE } eNOWType; #define tmpBUFSIZE 16 /* size of formatting buffer */ static uchar *getNOW(eNOWType eNow) { uchar *pBuf; struct syslogTime t; if((pBuf = (uchar*) malloc(sizeof(uchar) * tmpBUFSIZE)) == NULL) { glblHadMemShortage = 1; return NULL; } getCurrTime(&t); switch(eNow) { case NOW_NOW: snprintf((char*) pBuf, tmpBUFSIZE, "%4.4d-%2.2d-%2.2d", t.year, t.month, t.day); break; case NOW_YEAR: snprintf((char*) pBuf, tmpBUFSIZE, "%4.4d", t.year); break; case NOW_MONTH: snprintf((char*) pBuf, tmpBUFSIZE, "%2.2d", t.month); break; case NOW_DAY: snprintf((char*) pBuf, tmpBUFSIZE, "%2.2d", t.day); break; case NOW_HOUR: snprintf((char*) pBuf, tmpBUFSIZE, "%2.2d", t.hour); break; case NOW_MINUTE: snprintf((char*) pBuf, tmpBUFSIZE, "%2.2d", t.minute); break; } return(pBuf); } #undef tmpBUFSIZE /* clean up */ /* This function returns a string-representation of the * requested message property. This is a generic function used * to abstract properties so that these can be easier * queried. Returns NULL if property could not be found. * Actually, this function is a big if..elseif. What it does * is simply to map property names (from MonitorWare) to the * message object data fields. * * In case we need string forms of propertis we do not * yet have in string form, we do a memory allocation that * is sufficiently large (in all cases). Once the string * form has been obtained, it is saved until the Msg object * is finally destroyed. This is so that we save the processing * time in the (likely) case that this property is requested * again. It also saves us a lot of dynamic memory management * issues in the upper layers, because we so can guarantee that * the buffer will remain static AND available during the lifetime * of the object. Please note that both the max size allocation as * well as keeping things in memory might like look like a * waste of memory (some might say it actually is...) - we * deliberately accept this because performance is more important * to us ;) * rgerhards 2004-11-18 * Parameter "bMustBeFreed" is set by this function. It tells the * caller whether or not the string returned must be freed by the * caller itself. It is is 0, the caller MUST NOT free it. If it is * 1, the caller MUST free 1. Handling this wrongly leads to either * a memory leak of a program abort (do to double-frees or frees on * the constant memory pool). So be careful to do it right. * rgerhards 2004-11-23 * regular expression support contributed by Andres Riancho merged * on 2005-09-13 * changed so that it now an be called without a template entry (NULL). * In this case, only the (unmodified) property is returned. This will * be used in selector line processing. * rgerhards 2005-09-15 */ static char *MsgGetProp(msg_t *pMsg, struct templateEntry *pTpe, rsCStrObj *pCSPropName, unsigned short *pbMustBeFreed) { char *pName; char *pRes; /* result pointer */ char *pBufStart; char *pBuf; int iLen; #ifdef FEATURE_REGEXP /* Variables necessary for regular expression matching */ size_t nmatch = 2; regmatch_t pmatch[2]; #endif assert(pMsg != NULL); assert(pbMustBeFreed != NULL); if(pCSPropName == NULL) { assert(pTpe != NULL); pName = pTpe->data.field.pPropRepl; } else { pName = (char*) rsCStrGetSzStr(pCSPropName); } *pbMustBeFreed = 0; /* sometimes there are aliases to the original MonitoWare * property names. These come after || in the ifs below. */ if(!strcmp(pName, "msg")) { pRes = getMSG(pMsg); } else if(!strcmp(pName, "rawmsg")) { pRes = getRawMsg(pMsg); } else if(!strcmp(pName, "UxTradMsg")) { pRes = getUxTradMsg(pMsg); } else if(!strcmp(pName, "FROMHOST")) { pRes = getRcvFrom(pMsg); } else if(!strcmp(pName, "source") || !strcmp(pName, "HOSTNAME")) { pRes = getHOSTNAME(pMsg); } else if(!strcmp(pName, "syslogtag")) { pRes = getTAG(pMsg); } else if(!strcmp(pName, "PRI")) { pRes = getPRI(pMsg); } else if(!strcmp(pName, "PRI-text")) { pBuf = malloc(20 * sizeof(char)); if(pBuf == NULL) { *pbMustBeFreed = 0; return "**OUT OF MEMORY**"; } else { *pbMustBeFreed = 1; pRes = textpri(pBuf, 20, getPRIi(pMsg)); } } else if(!strcmp(pName, "iut")) { pRes = "1"; /* always 1 for syslog messages (a MonitorWare thing;)) */ } else if(!strcmp(pName, "syslogfacility")) { pRes = getFacility(pMsg); } else if(!strcmp(pName, "syslogfacility-text")) { pRes = getFacilityStr(pMsg); } else if(!strcmp(pName, "syslogseverity") || !strcmp(pName, "syslogpriority")) { pRes = getSeverity(pMsg); } else if(!strcmp(pName, "syslogseverity-text") || !strcmp(pName, "syslogpriority-text")) { pRes = getSeverityStr(pMsg); } else if(!strcmp(pName, "timegenerated")) { pRes = getTimeGenerated(pMsg, pTpe->data.field.eDateFormat); } else if(!strcmp(pName, "timereported") || !strcmp(pName, "TIMESTAMP")) { pRes = getTimeReported(pMsg, pTpe->data.field.eDateFormat); } else if(!strcmp(pName, "programname")) { pRes = getProgramName(pMsg); } else if(!strcmp(pName, "PROTOCOL-VERSION")) { pRes = getProtocolVersionString(pMsg); } else if(!strcmp(pName, "STRUCTURED-DATA")) { pRes = getStructuredData(pMsg); } else if(!strcmp(pName, "APP-NAME")) { pRes = getAPPNAME(pMsg); } else if(!strcmp(pName, "PROCID")) { pRes = getPROCID(pMsg); } else if(!strcmp(pName, "MSGID")) { pRes = getMSGID(pMsg); /* here start system properties (those, that do not relate to the message itself */ } else if(!strcmp(pName, "$NOW")) { if((pRes = (char*) getNOW(NOW_NOW)) == NULL) { return "***OUT OF MEMORY***"; } else *pbMustBeFreed = 1; /* all of these functions allocate dyn. memory */ } else if(!strcmp(pName, "$YEAR")) { if((pRes = (char*) getNOW(NOW_YEAR)) == NULL) { return "***OUT OF MEMORY***"; } else *pbMustBeFreed = 1; /* all of these functions allocate dyn. memory */ } else if(!strcmp(pName, "$MONTH")) { if((pRes = (char*) getNOW(NOW_MONTH)) == NULL) { return "***OUT OF MEMORY***"; } else *pbMustBeFreed = 1; /* all of these functions allocate dyn. memory */ } else if(!strcmp(pName, "$DAY")) { if((pRes = (char*) getNOW(NOW_DAY)) == NULL) { return "***OUT OF MEMORY***"; } else *pbMustBeFreed = 1; /* all of these functions allocate dyn. memory */ } else if(!strcmp(pName, "$HOUR")) { if((pRes = (char*) getNOW(NOW_HOUR)) == NULL) { return "***OUT OF MEMORY***"; } else *pbMustBeFreed = 1; /* all of these functions allocate dyn. memory */ } else if(!strcmp(pName, "$MINUTE")) { if((pRes = (char*) getNOW(NOW_MINUTE)) == NULL) { return "***OUT OF MEMORY***"; } else *pbMustBeFreed = 1; /* all of these functions allocate dyn. memory */ } else { /* there is no point in continuing, we may even otherwise render the * error message unreadable. rgerhards, 2007-07-10 */ return "**INVALID PROPERTY NAME**"; } /* If we did not receive a template pointer, we are already done... */ if(pTpe == NULL) { return pRes; } /* Now check if we need to make "temporary" transformations (these * are transformations that do not go back into the message - * memory must be allocated for them!). */ /* substring extraction */ /* first we check if we need to extract by field number * rgerhards, 2005-12-22 */ if(pTpe->data.field.has_fields == 1) { int iCurrFld; char *pFld; char *pFldEnd; /* first, skip to the field in question. The field separator * is always one character and is stored in the template entry. */ iCurrFld = 1; pFld = pRes; while(*pFld && iCurrFld < pTpe->data.field.iToPos) { /* skip fields until the requested field or end of string is found */ while(*pFld && (uchar) *pFld != pTpe->data.field.field_delim) ++pFld; /* skip to field terminator */ if(*pFld == pTpe->data.field.field_delim) { ++pFld; /* eat it */ ++iCurrFld; } } dprintf("field requested %d, field found %d\n", pTpe->data.field.iToPos, iCurrFld); if(iCurrFld == pTpe->data.field.iToPos) { /* field found, now extract it */ /* first of all, we need to find the end */ pFldEnd = pFld; while(*pFldEnd && *pFldEnd != pTpe->data.field.field_delim) ++pFldEnd; --pFldEnd; /* we are already at the delimiter - so we need to * step back a little not to copy it as part of the field. */ /* we got our end pointer, now do the copy */ /* TODO: code copied from below, this is a candidate for a separate function */ iLen = pFldEnd - pFld + 1; /* the +1 is for an actual char, NOT \0! */ pBufStart = pBuf = malloc((iLen + 1) * sizeof(char)); if(pBuf == NULL) { if(*pbMustBeFreed == 1) free(pRes); *pbMustBeFreed = 0; return "**OUT OF MEMORY**"; } /* now copy */ memcpy(pBuf, pFld, iLen); pBuf[iLen] = '\0'; /* terminate it */ if(*pbMustBeFreed == 1) free(pRes); pRes = pBufStart; *pbMustBeFreed = 1; if(*(pFldEnd+1) != '\0') ++pFldEnd; /* OK, skip again over delimiter char */ } else { /* field not found, return error */ if(*pbMustBeFreed == 1) free(pRes); *pbMustBeFreed = 0; return "**FIELD NOT FOUND**"; } } else if(pTpe->data.field.iFromPos != 0 || pTpe->data.field.iToPos != 0) { /* we need to obtain a private copy */ int iFrom, iTo; iFrom = pTpe->data.field.iFromPos; iTo = pTpe->data.field.iToPos; /* need to zero-base to and from (they are 1-based!) */ if(iFrom > 0) --iFrom; if(iTo > 0) --iTo; iLen = iTo - iFrom + 1; /* the +1 is for an actual char, NOT \0! */ pBufStart = pBuf = malloc((iLen + 1) * sizeof(char)); if(pBuf == NULL) { if(*pbMustBeFreed == 1) free(pRes); *pbMustBeFreed = 0; return "**OUT OF MEMORY**"; } if(iFrom) { /* skip to the start of the substring (can't do pointer arithmetic * because the whole string might be smaller!!) */ // ++iFrom; /* nbr of chars to skip! */ while(*pRes && iFrom) { --iFrom; ++pRes; } } /* OK, we are at the begin - now let's copy... */ while(*pRes && iLen) { *pBuf++ = *pRes; ++pRes; --iLen; } *pBuf = '\0'; if(*pbMustBeFreed == 1) free(pRes); pRes = pBufStart; *pbMustBeFreed = 1; #ifdef FEATURE_REGEXP } else { /* Check for regular expressions */ if (pTpe->data.field.has_regex != 0) { if (pTpe->data.field.has_regex == 2) /* Could not compile regex before! */ return "**NO MATCH** **BAD REGULAR EXPRESSION**"; dprintf("debug: String to match for regex is: %s\n", pRes); if (0 != regexec(&pTpe->data.field.re, pRes, nmatch, pmatch, 0)) { /* we got no match! */ return "**NO MATCH**"; } else { /* Match! */ /* I need to malloc pBuf */ int iLen; char *pBuf; iLen = pmatch[1].rm_eo - pmatch[1].rm_so; pBuf = (char *) malloc((iLen + 1) * sizeof(char)); if (pBuf == NULL) { if (*pbMustBeFreed == 1) free(pRes); *pbMustBeFreed = 0; return "**OUT OF MEMORY ALLOCATING pBuf**"; } /* Lets copy the matched substring to the buffer */ memcpy(pBuf, pRes + pmatch[1].rm_so, iLen); pBuf[iLen] = '\0';/* terminate string, did not happen before */ if (*pbMustBeFreed == 1) free(pRes); pRes = pBuf; *pbMustBeFreed = 1; } } #endif /* #ifdef FEATURE_REGEXP */ } /* case conversations (should go after substring, because so we are able to * work on the smallest possible buffer). */ if(pTpe->data.field.eCaseConv != tplCaseConvNo) { /* we need to obtain a private copy */ int iLen = strlen(pRes); char *pBufStart; char *pBuf; pBufStart = pBuf = malloc((iLen + 1) * sizeof(char)); if(pBuf == NULL) { if(*pbMustBeFreed == 1) free(pRes); *pbMustBeFreed = 0; return "**OUT OF MEMORY**"; } while(*pRes) { *pBuf++ = (pTpe->data.field.eCaseConv == tplCaseConvUpper) ? toupper(*pRes) : tolower(*pRes); /* currently only these two exist */ ++pRes; } *pBuf = '\0'; if(*pbMustBeFreed == 1) free(pRes); pRes = pBufStart; *pbMustBeFreed = 1; } /* now do control character dropping/escaping/replacement * Only one of these can be used. If multiple options are given, the * result is random (though currently there obviously is an order of * preferrence, see code below. But this is NOT guaranteed. * RGerhards, 2006-11-17 */ if(pTpe->data.field.options.bDropCC) { char *pSrc = pRes; char *pDst = pRes; while(*pSrc) { if(!iscntrl((int) *pSrc)) *pDst++ = *pSrc; ++pSrc; } *pDst = '\0'; } else if(pTpe->data.field.options.bSpaceCC) { char *pBuf = pRes; while(*pBuf) { if(iscntrl((int) *pBuf)) *pBuf = ' '; ++pBuf; } } else if(pTpe->data.field.options.bEscapeCC) { /* we must first count how many control charactes are * present, because we need this to compute the new string * buffer length. While doing so, we also compute the string * length. */ int iNumCC = 0; int iLen = 0; char *pBuf; for(pBuf = pRes ; *pBuf ; ++pBuf) { ++iLen; if(iscntrl((int) *pBuf)) ++iNumCC; } if(iNumCC > 0) { /* if 0, there is nothing to escape, so we are done */ /* OK, let's do the escaping... */ char *pBufStart; char szCCEsc[8]; /* buffer for escape sequence */ int i; iLen += iNumCC * 4; pBufStart = pBuf = malloc((iLen + 1) * sizeof(char)); if(pBuf == NULL) { if(*pbMustBeFreed == 1) free(pRes); *pbMustBeFreed = 0; return "**OUT OF MEMORY**"; } while(*pRes) { if(iscntrl((int) *pRes)) { snprintf(szCCEsc, sizeof(szCCEsc), "#%3.3d", *pRes); for(i = 0 ; i < 4 ; ++i) *pBuf++ = szCCEsc[i]; } else { *pBuf++ = *pRes; } ++pRes; } *pBuf = '\0'; if(*pbMustBeFreed == 1) free(pRes); pRes = pBufStart; *pbMustBeFreed = 1; } } /* Now drop last LF if present (pls note that this must not be done * if bEscapeCC was set! */ if(pTpe->data.field.options.bDropLastLF && !pTpe->data.field.options.bEscapeCC) { int iLen = strlen(pRes); char *pBuf; if(*(pRes + iLen - 1) == '\n') { /* we have a LF! */ /* check if we need to obtain a private copy */ if(pbMustBeFreed == 0) { /* ok, original copy, need a private one */ pBuf = malloc((iLen + 1) * sizeof(char)); if(pBuf == NULL) { if(*pbMustBeFreed == 1) free(pRes); *pbMustBeFreed = 0; return "**OUT OF MEMORY**"; } memcpy(pBuf, pRes, iLen - 1); pRes = pBuf; *pbMustBeFreed = 1; } *(pRes + iLen - 1) = '\0'; /* drop LF ;) */ } } /*dprintf("MsgGetProp(\"%s\"): \"%s\"\n", pName, pRes); only for verbose debug logging */ return(pRes); } /* rgerhards 2004-11-09: end of helper routines. On to the * "real" code ;) */ static int usage(void) { fprintf(stderr, "usage: rsyslogd [-46Adhvw] [-l hostlist] [-m markinterval] [-n] [-p path]\n" \ " [-s domainlist] [-r port] [-t port[,max-sessions]] [-f conffile] [-x]\n"); exit(1); /* "good" exit - done to terminate usage() */ } #ifdef SYSLOG_UNIXAF static int create_unix_socket(const char *path) { struct sockaddr_un sunx; int fd; char line[MAXLINE +1]; if (path[0] == '\0') return -1; (void) unlink(path); memset(&sunx, 0, sizeof(sunx)); sunx.sun_family = AF_UNIX; (void) strncpy(sunx.sun_path, path, sizeof(sunx.sun_path)); fd = socket(AF_UNIX, SOCK_DGRAM, 0); if (fd < 0 || bind(fd, (struct sockaddr *) &sunx, SUN_LEN(&sunx)) < 0 || chmod(path, 0666) < 0) { snprintf(line, sizeof(line), "cannot create %s", path); logerror(line); dprintf("cannot create %s (%d).\n", path, errno); close(fd); return -1; } return fd; } #endif #ifdef SYSLOG_INET /* closes the UDP listen sockets (if they exist) and frees * all dynamically assigned memory. */ static void closeUDPListenSockets() { register int i; if(finet != NULL) { for (i = 0; i < *finet; i++) close(finet[i+1]); free(finet); finet = NULL; } } /* creates the UDP listen sockets */ static int *create_udp_socket() { struct addrinfo hints, *res, *r; int error, maxs, *s, *socks, on = 1; int sockflags; memset(&hints, 0, sizeof(hints)); hints.ai_flags = AI_PASSIVE | AI_NUMERICSERV; hints.ai_family = family; hints.ai_socktype = SOCK_DGRAM; error = getaddrinfo(NULL, LogPort, &hints, &res); if(error) { logerror((char*) gai_strerror(error)); logerror("UDP message reception disabled due to error logged in last message.\n"); return NULL; } /* Count max number of sockets we may open */ for (maxs = 0, r = res; r != NULL ; r = r->ai_next, maxs++) /* EMPTY */; socks = malloc((maxs+1) * sizeof(int)); if (socks == NULL) { logerror("couldn't allocate memory for UDP sockets, suspending UDP message reception"); freeaddrinfo(res); return NULL; } *socks = 0; /* num of sockets counter at start of array */ s = socks + 1; for (r = res; r != NULL ; r = r->ai_next) { *s = socket(r->ai_family, r->ai_socktype, r->ai_protocol); if (*s < 0) { if(!(r->ai_family == PF_INET6 && errno == EAFNOSUPPORT)) logerror("create_udp_socket(), socket"); /* it is debatable if PF_INET with EAFNOSUPPORT should * also be ignored... */ continue; } # ifdef IPV6_V6ONLY if (r->ai_family == AF_INET6) { int on = 1; if (setsockopt(*s, IPPROTO_IPV6, IPV6_V6ONLY, (char *)&on, sizeof (on)) < 0) { logerror("setsockopt"); close(*s); *s = -1; continue; } } # endif /* if we have an error, we "just" suspend that socket. Eventually * other sockets will work. At the end of this function, we check * if we managed to open at least one socket. If not, we'll write * a "inet suspended" message and declare failure. Else we use * what we could obtain. * rgerhards, 2007-06-22 */ if (setsockopt(*s, SOL_SOCKET, SO_REUSEADDR, (char *) &on, sizeof(on)) < 0 ) { logerror("setsockopt(REUSEADDR)"); close(*s); *s = -1; continue; } /* We need to enable BSD compatibility. Otherwise an attacker * could flood our log files by sending us tons of ICMP errors. */ #ifndef BSD if (should_use_so_bsdcompat()) { if (setsockopt(*s, SOL_SOCKET, SO_BSDCOMPAT, (char *) &on, sizeof(on)) < 0) { logerror("setsockopt(BSDCOMPAT)"); close(*s); *s = -1; continue; } } #endif /* We must not block on the network socket, in case a packet * gets lost between select and recv, otherwise the process * will stall until the timeout, and other processes trying to * log will also stall. * Patch vom Colin Phipps to the original * sysklogd source. Applied to rsyslogd on 2005-10-19. */ if ((sockflags = fcntl(*s, F_GETFL)) != -1) { sockflags |= O_NONBLOCK; /* SETFL could fail too, so get it caught by the subsequent * error check. */ sockflags = fcntl(*s, F_SETFL, sockflags); } if (sockflags == -1) { logerror("fcntl(O_NONBLOCK)"); close(*s); *s = -1; continue; } /* rgerhards, 2007-06-22: if we run on a kernel that does not support * the IPV6_V6ONLY socket option, we need to use a work-around. On such * systems the IPv6 socket does also accept IPv4 sockets. So an IPv4 * socket can not listen on the same port as an IPv6 socket. The only * workaround is to ignore the "socket in use" error. This is what we * do if we have to. */ if( (bind(*s, r->ai_addr, r->ai_addrlen) < 0) # ifndef IPV6_V6ONLY && (errno != EADDRINUSE) # endif ) { logerror("bind"); close(*s); *s = -1; continue; } (*socks)++; s++; } if(res != NULL) freeaddrinfo(res); if(Debug && *socks != maxs) dprintf("We could initialize %d UDP listen sockets out of %d we received " "- this may or may not be an error indication.\n", *socks, maxs); if(*socks == 0) { logerror("No UDP listen socket could successfully be initialized, " "message reception via UDP disabled.\n"); /* we do NOT need to free any sockets, because there were none... */ free(socks); return(NULL); } return(socks); } #endif /* rgerhards, 2005-10-24: crunch_list is called only during option processing. So * it is never called once rsyslogd is running (not even when HUPed). This code * contains some exits, but they are considered safe because they only happen * during startup. Anyhow, when we review the code here, we might want to * reconsider the exit()s. */ static char **crunch_list(char *list) { int count, i; char *p, *q; char **result = NULL; p = list; /* strip off trailing delimiters */ while (p[strlen(p)-1] == LIST_DELIMITER) { count--; p[strlen(p)-1] = '\0'; } /* cut off leading delimiters */ while (p[0] == LIST_DELIMITER) { count--; p++; } /* count delimiters to calculate elements */ for (count=i=0; p[i]; i++) if (p[i] == LIST_DELIMITER) count++; if ((result = (char **)malloc(sizeof(char *) * (count+2))) == NULL) { printf ("Sorry, can't get enough memory, exiting.\n"); exit(0); /* safe exit, because only called during startup */ } /* * We now can assume that the first and last * characters are different from any delimiters, * so we don't have to care about this. */ count = 0; while ((q=strchr(p, LIST_DELIMITER))) { result[count] = (char *) malloc((q - p + 1) * sizeof(char)); if (result[count] == NULL) { printf ("Sorry, can't get enough memory, exiting.\n"); exit(0); /* safe exit, because only called during startup */ } strncpy(result[count], p, q - p); result[count][q - p] = '\0'; p = q; p++; count++; } if ((result[count] = \ (char *)malloc(sizeof(char) * strlen(p) + 1)) == NULL) { printf ("Sorry, can't get enough memory, exiting.\n"); exit(0); /* safe exit, because only called during startup */ } strcpy(result[count],p); result[++count] = NULL; #if 0 count=0; while (result[count]) dprintf ("#%d: %s\n", count, StripDomains[count++]); #endif return result; } static void untty() #ifdef HAVE_SETSID { if ( !Debug ) { setsid(); } return; } #else { int i; if ( !Debug ) { i = open(_PATH_TTY, O_RDWR); if (i >= 0) { (void) ioctl(i, (int) TIOCNOTTY, (char *)0); (void) close(i); } } } #endif /* rgerhards, 2006-11-30: I have greatly changed this function. Formerly, * it tried to reassemble multi-part messages, which is a legacy stock * sysklogd concept. In essence, that was that messages not ending with * \0 were glued together. As far as I can see, this is a sysklogd * specific feature and, from looking at the code, seems to be used * pretty seldom (if at all). I remove this now, not the least because it is totally * incompatible with upcoming IETF syslog standards. If you experience * strange behaviour with messages beeing split across multiple lines, * this function here might be the place to look at. * * Some previous history worth noting: * I added the "iSource" parameter. This is needed to distinguish between * messages that have a hostname in them (received from the internet) and * those that do not have (most prominently /dev/log). rgerhards 2004-11-16 * And now I removed the "iSource" parameter and changed it to be "bParseHost", * because all that it actually controls is whether the host is parsed or not. * For rfc3195 support, we needed to modify the algo for host parsing, so we can * no longer rely just on the source (rfc3195d forwarded messages arrive via * unix domain sockets but contain the hostname). rgerhards, 2005-10-06 */ static void printchopped(char *hname, char *msg, int len, int fd, int bParseHost) { register int iMsg; char *pMsg; char *pData; char *pEnd; char tmpline[MAXLINE + 1]; # ifdef USE_NETZIP char deflateBuf[MAXLINE + 1]; uLongf iLenDefBuf; # endif assert(hname != NULL); assert(msg != NULL); assert(len >= 0); dprintf("Message length: %d, File descriptor: %d.\n", len, fd); iMsg = 0; /* initialize receiving buffer index */ pMsg = tmpline; /* set receiving buffer pointer */ pData = msg; /* set source buffer pointer */ pEnd = msg + len; /* this is one off, which is intensional */ # ifdef USE_NETZIP /* we first need to check if we have a compressed record. If so, * we must decompress it. */ if(len > 0 && *msg == 'z') { /* compressed data present? (do NOT change order if conditions!) */ /* we have compressed data, so let's deflate it. We support a maximum * message size of MAXLINE. If it is larger, an error message is logged * and the message is dropped. We do NOT try to decompress larger messages * as such might be used for denial of service. It might happen to later * builds that such functionality be added as an optional, operator-configurable * feature. */ int ret; iLenDefBuf = MAXLINE; ret = uncompress((uchar *) deflateBuf, &iLenDefBuf, (uchar *) msg+1, len-1); dprintf("Compressed message uncompressed with status %d, length: new %d, old %d.\n", ret, iLenDefBuf, len-1); /* Now check if the uncompression worked. If not, there is not much we can do. In * that case, we log an error message but ignore the message itself. Storing the * compressed text is dangerous, as it contains control characters. So we do * not do this. If someone would like to have a copy, this code here could be * modified to do a hex-dump of the buffer in question. We do not include * this functionality right now. * rgerhards, 2006-12-07 */ if(ret != Z_OK) { logerrorInt("Uncompression of a message failed with return code %d " "- enable debug logging if you need further information. " "Message ignored.", ret); return; /* unconditional exit, nothing left to do... */ } pData = deflateBuf; pEnd = deflateBuf + iLenDefBuf; } # else /* ifdef USE_NETZIP */ /* in this case, we still need to check if the message is compressed. If so, we must * tell the user we can not accept it. */ if(len > 0 && *msg == 'z') { logerror("Received a compressed message, but rsyslogd does not have compression " "support enabled. The message will be ignored."); return; } # endif /* ifdef USE_NETZIP */ while(pData < pEnd) { if(iMsg >= MAXLINE) { /* emergency, we now need to flush, no matter if * we are at end of message or not... */ *(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */ printline(hname, tmpline, bParseHost); return; /* in this case, we are done... nothing left we can do */ } if(*pData == '\0') { /* guard against \0 characters... */ /* changed to the sequence (somewhat) proposed in * draft-ietf-syslog-protocol-19. rgerhards, 2006-11-30 */ if(iMsg + 3 < MAXLINE) { /* do we have space? */ *(pMsg + iMsg++) = '#'; *(pMsg + iMsg++) = '0'; *(pMsg + iMsg++) = '0'; *(pMsg + iMsg++) = '0'; } /* if we do not have space, we simply ignore the '\0'... */ /* log an error? Very questionable... rgerhards, 2006-11-30 */ /* decided: we do not log an error, it won't help... rger, 2007-06-21 */ ++pData; } else { *(pMsg + iMsg++) = *pData++; } } *(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */ /* typically, we should end up here! */ printline(hname, tmpline, bParseHost); return; } /* Take a raw input line, decode the message, and print the message * on the appropriate log files. * rgerhards 2004-11-08: Please note * that this function does only a partial decoding. At best, it splits * the PRI part. No further decode happens. The rest is done in * logmsg(). Please note that printsys() calls logmsg() directly, so * this is something we need to restructure once we are moving the * real decoder in here. I now (2004-11-09) found that printsys() seems * not to be called from anywhere. So we might as well decode the full * message here. * Added the iSource parameter so that we know if we have to parse * HOSTNAME or not. rgerhards 2004-11-16. * changed parameter iSource to bParseHost. For details, see comment in * printchopped(). rgerhards 2005-10-06 */ void printline(char *hname, char *msg, int bParseHost) { register char *p; int pri; msg_t *pMsg; /* Now it is time to create the message object (rgerhards) */ if((pMsg = MsgConstruct()) == NULL){ /* rgerhards, 2007-06-21: if we can not get memory, we discard this * message but continue to run (in the hope that things improve) */ dprintf("Memory shortage in printline(): Could not construct Msg object.\n"); return; } MsgSetRawMsg(pMsg, msg); pMsg->bParseHOSTNAME = bParseHost; /* test for special codes */ pri = DEFUPRI; p = msg; if (*p == '<') { pri = 0; while (isdigit((int) *++p)) { pri = 10 * pri + (*p - '0'); } if (*p == '>') ++p; } if (pri &~ (LOG_FACMASK|LOG_PRIMASK)) pri = DEFUPRI; pMsg->iFacility = LOG_FAC(pri); pMsg->iSeverity = LOG_PRI(pri); /* got the buffer, now copy over the message. We use the "old" code * here, it doesn't make sense to optimize as that code will soon * be replaced. */ #if 0 /* TODO: REMOVE THIS LATER */ /* we soon need to support UTF-8, so we will soon need to remove * this. As a side-note, the commented out code would destroy MBCS messages * (like Japanese). */ q = pMsg->pszMSG; pEnd = pMsg->pszMSG + pMsg->iLenMSG; /* was -4 */ while ((c = *p++) && q < pEnd) { if (c == '\n') *q++ = ' '; /* not yet! else if (c < 040) { *q++ = '^'; *q++ = c ^ 0100; } else if (c == 0177 || (c & 0177) < 040) { *q++ = '\\'; *q++ = '0' + ((c & 0300) >> 6); *q++ = '0' + ((c & 0070) >> 3); *q++ = '0' + (c & 0007); }*/ else *q++ = c; } *q = '\0'; #endif /* Now we look at the HOSTNAME. That is a bit complicated... * If we have a locally received message, it does NOT * contain any hostname information in the message itself. * As such, the HOSTNAME is the same as the system that * the message was received from (that, for obvious reasons, * being the local host). rgerhards 2004-11-16 */ if(bParseHost == 0) MsgSetHOSTNAME(pMsg, hname); MsgSetRcvFrom(pMsg, hname); /* rgerhards 2004-11-19: well, well... we've now seen that we * have the "hostname problem" also with the traditional Unix * message. As we like to emulate it, we need to add the hostname * to it. */ if(MsgSetUxTradMsg(pMsg, p) != 0) return; logmsg(pri, pMsg, SYNC_FILE); /* rgerhards 2004-11-11: * we are done with the message object. If it still is * stored somewhere, we can call discard anyhow. This * is handled via the reference count - see description * of msg_t for details. */ MsgDestruct(pMsg); return; } time_t now; /* rgerhards 2004-11-09: the following is a function that can be used * to log a message orginating from the syslogd itself. In sysklogd code, * this is done by simply calling logmsg(). However, logmsg() is changed in * rsyslog so that it takes a msg "object". So it can no longer be called * directly. This method here solves the need. It provides an interface that * allows to construct a locally-generated message. Please note that this * function here probably is only an interim solution and that we need to * think on the best way to do this. */ static void logmsgInternal(int pri, char * msg, char* from, int flags) { msg_t *pMsg; if((pMsg = MsgConstruct()) == NULL){ /* rgerhards 2004-11-09: calling panic might not be the * brightest idea - however, it is the best I currently have * (think a bit more about this). * rgehards, 2007-06-21: I have now thought a bit more about * it. If we are so low on memory, there is few we can do. calling * panic so far only write a debug line - this is seomthing we keep. * Other than that, however, we ignore the error and hope that * memory shortage will be resolved while we continue to run. In any * case, there is no valid point in aborting the syslogd for this * reason - that would be counter-productive. So we ignore the * to be logged message. */ glblHadMemShortage = 1; dprintf("Memory shortage in logmsgInternal: could not construct Msg object.\n"); return; } MsgSetUxTradMsg(pMsg, msg); MsgSetRawMsg(pMsg, msg); MsgSetHOSTNAME(pMsg, LocalHostName); MsgSetTAG(pMsg, "rsyslogd:"); pMsg->iFacility = LOG_FAC(pri); pMsg->iSeverity = LOG_PRI(pri); pMsg->bParseHOSTNAME = 0; getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */ logmsg(pri, pMsg, flags | INTERNAL_MSG); MsgDestruct(pMsg); } /* * This functions looks at the given message and checks if it matches the * provided filter condition. If so, it returns true, else it returns * false. This is a helper to logmsg() and meant to drive the decision * process if a message is to be processed or not. As I expect this * decision code to grow more complex over time AND logmsg() is already * a very lengthe function, I thought a separate function is more appropriate. * 2005-09-19 rgerhards */ int shouldProcessThisMessage(selector_t *f, msg_t *pMsg) { unsigned short pbMustBeFreed; char *pszPropVal; int iRet = 0; assert(f != NULL); assert(pMsg != NULL); /* we first have a look at the global, BSD-style block filters (for tag * and host). Only if they match, we evaluate the actual filter. * rgerhards, 2005-10-18 */ if(f->eHostnameCmpMode == HN_NO_COMP) { /* EMPTY BY INTENSION - we check this value first, because * it is the one most often used, so this saves us time! */ } else if(f->eHostnameCmpMode == HN_COMP_MATCH) { if(rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) { /* not equal, so we are already done... */ dprintf("hostname filter '+%s' does not match '%s'\n", rsCStrGetSzStr(f->pCSHostnameComp), getHOSTNAME(pMsg)); return 0; } } else { /* must be -hostname */ if(!rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) { /* not equal, so we are already done... */ dprintf("hostname filter '-%s' does not match '%s'\n", rsCStrGetSzStr(f->pCSHostnameComp), getHOSTNAME(pMsg)); return 0; } } if(f->pCSProgNameComp != NULL) { if(rsCStrSzStrCmp(f->pCSProgNameComp, (uchar*) getProgramName(pMsg), getProgramNameLen(pMsg))) { /* not equal, so we are already done... */ dprintf("programname filter '%s' does not match '%s'\n", rsCStrGetSzStr(f->pCSProgNameComp), getProgramName(pMsg)); return 0; } } /* done with the BSD-style block filters */ if(f->f_filter_type == FILTER_PRI) { /* skip messages that are incorrect priority */ if ( (f->f_filterData.f_pmask[pMsg->iFacility] == TABLE_NOPRI) || \ ((f->f_filterData.f_pmask[pMsg->iFacility] & (1<iSeverity)) == 0) ) iRet = 0; else iRet = 1; } else { assert(f->f_filter_type == FILTER_PROP); /* assert() just in case... */ pszPropVal = MsgGetProp(pMsg, NULL, f->f_filterData.prop.pCSPropName, &pbMustBeFreed); /* Now do the compares (short list currently ;)) */ switch(f->f_filterData.prop.operation ) { case FIOP_CONTAINS: if(rsCStrLocateInSzStr(f->f_filterData.prop.pCSCompValue, (uchar*) pszPropVal) != -1) iRet = 1; break; case FIOP_ISEQUAL: if(rsCStrSzStrCmp(f->f_filterData.prop.pCSCompValue, (uchar*) pszPropVal, strlen(pszPropVal)) == 0) iRet = 1; /* process message! */ break; case FIOP_STARTSWITH: if(rsCStrSzStrStartsWithCStr(f->f_filterData.prop.pCSCompValue, (uchar*) pszPropVal, strlen(pszPropVal)) == 0) iRet = 1; /* process message! */ break; default: /* here, it handles NOP (for performance reasons) */ assert(f->f_filterData.prop.operation == FIOP_NOP); iRet = 1; /* as good as any other default ;) */ break; } /* now check if the value must be negated */ if(f->f_filterData.prop.isNegated) iRet = (iRet == 1) ? 0 : 1; /* cleanup */ if(pbMustBeFreed) free(pszPropVal); if(Debug) { char *pszPropVal; unsigned short pbMustBeFreed; pszPropVal = MsgGetProp(pMsg, NULL, f->f_filterData.prop.pCSPropName, &pbMustBeFreed); printf("Filter: check for property '%s' (value '%s') ", rsCStrGetSzStr(f->f_filterData.prop.pCSPropName), pszPropVal); if(f->f_filterData.prop.isNegated) printf("NOT "); printf("%s '%s': %s\n", getFIOPName(f->f_filterData.prop.operation), rsCStrGetSzStr(f->f_filterData.prop.pCSCompValue), iRet ? "TRUE" : "FALSE"); if(pbMustBeFreed) free(pszPropVal); } } return(iRet); } /* Process (consume) a received message. Calls the actions configured. * Can some time later run in its own thread. To aid this, the calling * parameters should be reduced to just pMsg. * See comment dated 2005-10-13 in logmsg() on multithreading. * rgerhards, 2005-10-13 */ static void processMsg(msg_t *pMsg) { selector_t *f; assert(pMsg != NULL); /* log the message to the particular outputs */ if (!Initialized) { /* If we reach this point, the daemon initialization FAILED. That is, * syslogd is NOT actually running. So what we do here is just * initialize a pointer to the system console and then output * the message to the it. So at least we have a little * chance that messages show up somewhere. * rgerhards 2004-11-09 */ f = &consfile; f->f_file = open(ctty, O_WRONLY|O_NOCTTY); if (f->f_file >= 0) { untty(); f->f_pMsg = MsgAddRef(pMsg); /* is expected here... */ fprintlog(f); MsgDestruct(pMsg); (void) close(f->f_file); f->f_file = -1; } /* now log to a second emergency log... 2005-06-21 rgerhards */ /* TODO: make this configurable, eventually via the command line */ if(ttyname(0) != NULL) { memset(&emergfile, 0, sizeof(emergfile)); f = &emergfile; emergfile.f_type = F_TTY; strcpy(emergfile.f_un.f_file.f_fname, ttyname(0)); cflineSetTemplateAndIOV(&emergfile, " TradFmt"); f->f_file = open(ttyname(0), O_WRONLY|O_NOCTTY); if (f->f_file >= 0) { untty(); f->f_pMsg = MsgAddRef(pMsg); /* is expected here... */ fprintlog(f); MsgDestruct(pMsg); (void) close(f->f_file); f->f_file = -1; } } return; /* we are done with emergency loging */ } for (f = Files; f != NULL ; f = f->f_next) { /* first, we need to check if this is a disabled (F_UNUSED) * entry. If so, we must not further process it, as the data * structure probably contains invalid pointers and other * such mess. * rgerhards 2005-09-26 */ if(f->f_type == F_UNUSED) continue; /* on to next */ /* This is actually the "filter logic". Looks like we need * to improve it a little for complex selector line conditions. We * won't do that for now, but at least we now know where * to look at. * 2005-09-09 rgerhards * ok, we are now ready to move to something more advanced. Because * of this, I am moving the actual decision code to outside this function. * 2005-09-19 rgerhards */ if(!shouldProcessThisMessage(f, pMsg)) { continue; } /* We now need to check a special case - F_DISCARD. If that * action is specified in the selector line, no futher processing * must be done. Thus, we stop the for-loop. * 2005-09-09 rgerhards */ if(f->f_type == F_DISCARD) { dprintf("Discarding message based on selector config\n"); break; /* that's it for this message ;) */ } /* don't output marks to recently written files */ if ((pMsg->msgFlags & MARK) && (now - f->f_time) < MarkInterval / 2) continue; /* suppress duplicate lines to this file */ if ((f->f_ReduceRepeated == 1) && (pMsg->msgFlags & MARK) == 0 && getMSGLen(pMsg) == getMSGLen(f->f_pMsg) && !strcmp(getMSG(pMsg), getMSG(f->f_pMsg)) && !strcmp(getHOSTNAME(pMsg), getHOSTNAME(f->f_pMsg))) { f->f_prevcount++; dprintf("msg repeated %d times, %ld sec of %d.\n", f->f_prevcount, now - f->f_time, repeatinterval[f->f_repeatcount]); /* If domark would have logged this by now, * flush it now (so we don't hold isolated messages), * but back off so we'll flush less often in the future. */ if (now > REPEATTIME(f)) { fprintlog(f); BACKOFF(f); } } else { /* new line, save it */ /* first check if we have a previous message stored * if so, emit and then discard it first */ if(f->f_pMsg != NULL) { if(f->f_prevcount > 0) fprintlog(f); MsgDestruct(f->f_pMsg); } f->f_pMsg = MsgAddRef(pMsg); /* call the output driver */ fprintlog(f); } } } #ifdef USE_PTHREADS /* This block contains code that is only present when USE_PTHREADS is * enabled. I plan to move it to some other file, but for the time * being, I include it here because that saves me from the need to * do so many external definitons. * rgerhards, 2005-10-24 */ /* shuts down the worker process. The worker will first finish * with the message queue. Control returns, when done. * This function is intended to be called during syslogd shutdown * AND restart (init()!). * rgerhards, 2005-10-25 */ static void stopWorker(void) { if(bRunningMultithreaded) { /* we could run single-threaded if there was an error * during startup. Then, we obviously do not need to * do anything to stop the worker ;) */ dprintf("Initiating worker thread shutdown sequence...\n"); /* We are now done with all messages, so we need to wake up the * worker thread and then wait for it to finish. */ bGlblDone = 1; /* It's actually not "not empty" below but awaking the worker. The worker * then finds out that it shall terminate and does so. */ pthread_cond_signal(pMsgQueue->notEmpty); pthread_join(thrdWorker, NULL); bRunningMultithreaded = 0; dprintf("Worker thread terminated.\n"); } } /* starts the worker thread. It must be made sure that the queue is * already existing and the worker is NOT already running. * rgerhards 2005-10-25 */ static void startWorker(void) { int i; if(pMsgQueue != NULL) { bGlblDone = 0; /* we are NOT done (else worker would immediately terminate) */ i = pthread_create(&thrdWorker, NULL, singleWorker, NULL); dprintf("Worker thread started with state %d.\n", i); bRunningMultithreaded = 1; } else { dprintf("message queue not existing, remaining single-threaded.\n"); } } static msgQueue *queueInit (void) { msgQueue *q; q = (msgQueue *)malloc (sizeof (msgQueue)); if (q == NULL) return (NULL); q->empty = 1; q->full = 0; q->head = 0; q->tail = 0; q->mut = (pthread_mutex_t *) malloc (sizeof (pthread_mutex_t)); pthread_mutex_init (q->mut, NULL); q->notFull = (pthread_cond_t *) malloc (sizeof (pthread_cond_t)); pthread_cond_init (q->notFull, NULL); q->notEmpty = (pthread_cond_t *) malloc (sizeof (pthread_cond_t)); pthread_cond_init (q->notEmpty, NULL); return (q); } static void queueDelete (msgQueue *q) { pthread_mutex_destroy (q->mut); free (q->mut); pthread_cond_destroy (q->notFull); free (q->notFull); pthread_cond_destroy (q->notEmpty); free (q->notEmpty); free (q); } static void queueAdd (msgQueue *q, void* in) { q->buf[q->tail] = in; q->tail++; if (q->tail == QUEUESIZE) q->tail = 0; if (q->tail == q->head) q->full = 1; q->empty = 0; return; } static void queueDel (msgQueue *q, msg_t **out) { *out = (msg_t*) q->buf[q->head]; q->head++; if (q->head == QUEUESIZE) q->head = 0; if (q->head == q->tail) q->empty = 1; q->full = 0; return; } /* The worker thread (so far, we have dual-threading, so only one * worker thread. Having more than one worker requires considerable * additional code review in regard to thread-safety. */ static void *singleWorker(void *vParam) { msgQueue *fifo = pMsgQueue; msg_t *pMsg; assert(fifo != NULL); while(!bGlblDone || !fifo->empty) { pthread_mutex_lock(fifo->mut); while (fifo->empty && !bGlblDone) { dprintf ("singleWorker: queue EMPTY, waiting for next message.\n"); pthread_cond_wait (fifo->notEmpty, fifo->mut); } if(!fifo->empty) { /* dequeue element (still protected from mutex) */ queueDel(fifo, &pMsg); assert(pMsg != NULL); pthread_mutex_unlock(fifo->mut); pthread_cond_signal (fifo->notFull); /* do actual processing (the lengthy part, runs in parallel) */ dprintf("Lone worker is running...\n"); processMsg(pMsg); MsgDestruct(pMsg); /* If you need a delay for testing, here do a */ /* sleep(1); */ } else { /* the mutex must be unlocked in any case (important for termination) */ pthread_mutex_unlock(fifo->mut); } if(debugging_on && bGlblDone && !fifo->empty) dprintf("Worker does not yet terminate because it still has messages to process.\n"); } dprintf("Worker thread terminates\n"); pthread_exit(0); } /* END threads-related code */ #endif /* #ifdef USE_PTHREADS */ /* This method enqueues a message into the the message buffer. It also * the worker thread, so that the message will be processed. If we are * compiled without PTHREADS support, we simply use this method as * an alias for processMsg(). * See comment dated 2005-10-13 in logmsg() on multithreading. * rgerhards, 2005-10-24 */ #ifndef USE_PTHREADS #define enqueueMsg(x) processMsg((x)) #else static void enqueueMsg(msg_t *pMsg) { int iRet; msgQueue *fifo = pMsgQueue; assert(pMsg != NULL); if(bRunningMultithreaded == 0) { /* multi-threading is not yet initialized, happens e.g. * during startup and restart. rgerhards, 2005-10-25 */ dprintf("enqueueMsg: not yet running on multiple threads\n"); processMsg(pMsg); } else { /* "normal" mode, threading initialized */ iRet = pthread_mutex_lock(fifo->mut); while (fifo->full) { dprintf ("enqueueMsg: queue FULL.\n"); pthread_cond_wait (fifo->notFull, fifo->mut); } queueAdd(fifo, MsgAddRef(pMsg)); /* now activate the worker thread */ pthread_mutex_unlock(fifo->mut); iRet = pthread_cond_signal(fifo->notEmpty); dprintf("EnqueueMsg signaled condition (%d)\n", iRet); } } #endif /* #ifndef USE_PTHREADS */ /* Helper to parseRFCSyslogMsg. This function parses a field up to * (and including) the SP character after it. The field contents is * returned in a caller-provided buffer. The parsepointer is advanced * to after the terminating SP. The caller must ensure that the * provided buffer is large enough to hold the to be extracted value. * Returns 0 if everything is fine or 1 if either the field is not * SP-terminated or any other error occurs. * rger, 2005-11-24 */ static int parseRFCField(char **pp2parse, char *pResult) { char *p2parse; int iRet = 0; assert(pp2parse != NULL); assert(*pp2parse != NULL); assert(pResult != NULL); p2parse = *pp2parse; /* this is the actual parsing loop */ while(*p2parse && *p2parse != ' ') { *pResult++ = *p2parse++; } if(*p2parse == ' ') ++p2parse; /* eat SP, but only if not at end of string */ else iRet = 1; /* there MUST be an SP! */ *pResult = '\0'; /* set the new parse pointer */ *pp2parse = p2parse; return 0; } /* Helper to parseRFCSyslogMsg. This function parses the structured * data field of a message. It does NOT parse inside structured data, * just gets the field as whole. Parsing the single entities is left * to other functions. The parsepointer is advanced * to after the terminating SP. The caller must ensure that the * provided buffer is large enough to hold the to be extracted value. * Returns 0 if everything is fine or 1 if either the field is not * SP-terminated or any other error occurs. * rger, 2005-11-24 */ static int parseRFCStructuredData(char **pp2parse, char *pResult) { char *p2parse; int bCont = 1; int iRet = 0; assert(pp2parse != NULL); assert(*pp2parse != NULL); assert(pResult != NULL); p2parse = *pp2parse; /* this is the actual parsing loop * Remeber: structured data starts with [ and includes any characters * until the first ] followed by a SP. There may be spaces inside * structured data. There may also be \] inside the structured data, which * do NOT terminate an element. */ if(*p2parse != '[') return 1; /* this is NOT structured data! */ while(bCont) { if(*p2parse == '\0') { iRet = 1; /* this is not valid! */ bCont = 0; } else if(*p2parse == '\\' && *(p2parse+1) == ']') { /* this is escaped, need to copy both */ *pResult++ = *p2parse++; *pResult++ = *p2parse++; } else if(*p2parse == ']' && *(p2parse+1) == ' ') { /* found end, just need to copy the ] and eat the SP */ *pResult++ = *p2parse; p2parse += 2; bCont = 0; } else { *pResult++ = *p2parse++; } } if(*p2parse == ' ') ++p2parse; /* eat SP, but only if not at end of string */ else iRet = 1; /* there MUST be an SP! */ *pResult = '\0'; /* set the new parse pointer */ *pp2parse = p2parse; return 0; } /* parse a RFC-formatted syslog message. This function returns * 0 if processing of the message shall continue and 1 if something * went wrong and this messe should be ignored. This function has been * implemented in the effort to support syslog-protocol. Please note that * the name (parse *RFC*) stems from the hope that syslog-protocol will * some time become an RFC. Do not confuse this with informational * RFC 3164 (which is legacy syslog). * * currently supported format: * * VERSION SP TIMESTAMP SP HOSTNAME SP APP-NAME SP PROCID SP MSGID SP [SD-ID]s SP MSG * * is already stripped when this function is entered. VERSION already * has been confirmed to be "1", but has NOT been stripped from the message. * * rger, 2005-11-24 */ static int parseRFCSyslogMsg(msg_t *pMsg, int flags) { char *p2parse; char *pBuf; int bContParse = 1; assert(pMsg != NULL); assert(pMsg->pszUxTradMsg != NULL); p2parse = (char*) pMsg->pszUxTradMsg; /* do a sanity check on the version and eat it */ assert(p2parse[0] == '1' && p2parse[1] == ' '); p2parse += 2; /* Now get us some memory we can use as a work buffer while parsing. * We simply allocated a buffer sufficiently large to hold all of the * message, so we can not run into any troubles. I think this is * more wise then to use individual buffers. */ if((pBuf = malloc(sizeof(char)* strlen(p2parse) + 1)) == NULL) return 1; /* IMPORTANT NOTE: * Validation is not actually done below nor are any errors handled. I have * NOT included this for the current proof of concept. However, it is strongly * advisable to add it when this code actually goes into production. * rgerhards, 2005-11-24 */ /* TIMESTAMP */ if(srSLMGParseTIMESTAMP3339(&(pMsg->tTIMESTAMP), &p2parse) == FALSE) { dprintf("no TIMESTAMP detected!\n"); bContParse = 0; flags |= ADDDATE; } if (flags & ADDDATE) { getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */ } /* HOSTNAME */ if(bContParse) { parseRFCField(&p2parse, pBuf); MsgSetHOSTNAME(pMsg, pBuf); } else { /* we can not parse, so we get the system we * received the data from. */ MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } /* APP-NAME */ if(bContParse) { parseRFCField(&p2parse, pBuf); MsgSetAPPNAME(pMsg, pBuf); } /* PROCID */ if(bContParse) { parseRFCField(&p2parse, pBuf); MsgSetPROCID(pMsg, pBuf); } /* MSGID */ if(bContParse) { parseRFCField(&p2parse, pBuf); MsgSetMSGID(pMsg, pBuf); } /* STRUCTURED-DATA */ if(bContParse) { parseRFCStructuredData(&p2parse, pBuf); MsgSetStructuredData(pMsg, pBuf); } /* MSG */ MsgSetMSG(pMsg, p2parse); return 0; /* all ok */ } /* parse a legay-formatted syslog message. This function returns * 0 if processing of the message shall continue and 1 if something * went wrong and this messe should be ignored. This function has been * implemented in the effort to support syslog-protocol. * rger, 2005-11-24 * As of 2006-01-10, I am removing the logic to continue parsing only * when a valid TIMESTAMP is detected. Validity of other fields already * is ignored. This is due to the fact that the parser has grown smarter * and is now more able to understand different dialects of the syslog * message format. I do not expect any bad side effects of this change, * but I thought I log it in this comment. * rgerhards, 2006-01-10 */ static int parseLegacySyslogMsg(msg_t *pMsg, int flags) { char *p2parse; char *pBuf; char *pWork; rsCStrObj *pStrB; int iCnt; int bTAGCharDetected; assert(pMsg != NULL); assert(pMsg->pszUxTradMsg != NULL); p2parse = (char*) pMsg->pszUxTradMsg; /* * Check to see if msg contains a timestamp */ if(srSLMGParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), p2parse) == TRUE) p2parse += 16; else { flags |= ADDDATE; } /* here we need to check if the timestamp is valid. If it is not, * we can not continue to parse but must treat the rest as the * MSG part of the message (as of RFC 3164). * rgerhards 2004-12-03 */ (void) time(&now); if (flags & ADDDATE) { getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */ } /* rgerhards, 2006-03-13: next, we parse the hostname and tag. But we * do this only when the user has not forbidden this. I now introduce some * code that allows a user to configure rsyslogd to treat the rest of the * message as MSG part completely. In this case, the hostname will be the * machine that we received the message from and the tag will be empty. This * is meant to be an interim solution, but for now it is in the code. */ if(bParseHOSTNAMEandTAG && !(flags & INTERNAL_MSG)) { /* parse HOSTNAME - but only if this is network-received! * rger, 2005-11-14: we still have a problem with BSD messages. These messages * do NOT include a host name. In most cases, this leads to the TAG to be treated * as hostname and the first word of the message as the TAG. Clearly, this is not * of advantage ;) I think I have now found a way to handle this situation: there * are certain characters which are frequently used in TAG (e.g. ':'), which are * *invalid* in host names. So while parsing the hostname, I check for these characters. * If I find them, I set a simple flag but continue. After parsing, I check the flag. * If it was set, then we most probably do not have a hostname but a TAG. Thus, I change * the fields. I think this logic shall work with any type of syslog message. */ bTAGCharDetected = 0; if(pMsg->bParseHOSTNAME) { /* TODO: quick and dirty memory allocation */ if((pBuf = malloc(sizeof(char)* strlen(p2parse) +1)) == NULL) return 1; pWork = pBuf; /* this is the actual parsing loop */ while(*p2parse && *p2parse != ' ' && *p2parse != ':') { if( *p2parse == '[' || *p2parse == ']' || *p2parse == '/') bTAGCharDetected = 1; *pWork++ = *p2parse++; } /* we need to handle ':' seperately, because it terminates the * TAG - so we also need to terminate the parser here! */ if(*p2parse == ':') { bTAGCharDetected = 1; ++p2parse; } else if(*p2parse == ' ') ++p2parse; *pWork = '\0'; MsgAssignHOSTNAME(pMsg, pBuf); } /* check if we seem to have a TAG */ if(bTAGCharDetected) { /* indeed, this smells like a TAG, so lets use it for this. We take * the HOSTNAME from the sender system instead. */ dprintf("HOSTNAME contains invalid characters, assuming it to be a TAG.\n"); moveHOSTNAMEtoTAG(pMsg); MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } /* now parse TAG - that should be present in message from * all sources. * This code is somewhat not compliant with RFC 3164. As of 3164, * the TAG field is ended by any non-alphanumeric character. In * practice, however, the TAG often contains dashes and other things, * which would end the TAG. So it is not desirable. As such, we only * accept colon and SP to be terminators. Even there is a slight difference: * a colon is PART of the TAG, while a SP is NOT part of the tag * (it is CONTENT). Finally, we allow only up to 32 characters for * TAG, as it is specified in RFC 3164. */ /* The following code in general is quick & dirty - I need to get * it going for a test, rgerhards 2004-11-16 */ /* lol.. we tried to solve it, just to remind ourselfs that 32 octets * is the max size ;) we need to shuffle the code again... Just for * the records: the code is currently clean, but we could optimize it! */ if(!bTAGCharDetected) { char *pszTAG; if((pStrB = rsCStrConstruct()) == NULL) return 1; rsCStrSetAllocIncrement(pStrB, 33); pWork = pBuf; iCnt = 0; while(*p2parse && *p2parse != ':' && *p2parse != ' ' && iCnt < 32) { rsCStrAppendChar(pStrB, *p2parse++); ++iCnt; } if(*p2parse == ':') { ++p2parse; rsCStrAppendChar(pStrB, ':'); } rsCStrFinish(pStrB); pszTAG = (char*) rsCStrConvSzStrAndDestruct(pStrB); if(pszTAG == NULL) { /* rger, 2005-11-10: no TAG found - this implies that what * we have considered to be the HOSTNAME is most probably the * TAG. We consider it so probable, that we now adjust it * that way. So we pick up the previously set hostname, assign * it to tag and use the sender system (from IP stack) as * the hostname. This situation is the standard case with * stock BSD syslogd. */ dprintf("No TAG in message, assuming that HOSTNAME is missing.\n"); moveHOSTNAMEtoTAG(pMsg); MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } else { /* we have a TAG, so we can happily set it ;) */ MsgAssignTAG(pMsg, pszTAG); } } else { /* we have no TAG, so we ... */ /*DO NOTHING*/; } } else { /* we enter this code area when the user has instructed rsyslog NOT * to parse HOSTNAME and TAG - rgerhards, 2006-03-13 */ if(!(flags & INTERNAL_MSG)) { dprintf("HOSTNAME and TAG not parsed by user configuraton.\n"); MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } } /* The rest is the actual MSG */ MsgSetMSG(pMsg, p2parse); return 0; /* all ok */ } /* * Log a message to the appropriate log files, users, etc. based on * the priority. * rgerhards 2004-11-08: actually, this also decodes all but the PRI part. * rgerhards 2004-11-09: ... but only, if syslogd could properly be initialized * if not, we use emergency logging to the console and in * this case, no further decoding happens. * changed to no longer receive a plain message but a msg object instead. * rgerhards-2004-11-16: OK, we are now up to another change... This method * actually needs to PARSE the message. How exactly this needs to happen depends on * a number of things. Most importantly, it depends on the source. For example, * locally received messages (SOURCE_UNIXAF) do NOT have a hostname in them. So * we need to treat them differntly form network-received messages which have. * Well, actually not all network-received message really have a hostname. We * can just hope they do, but we can not be sure. So this method tries to find * whatever can be found in the message and uses that... Obviously, there is some * potential for misinterpretation, which we simply can not solve under the * circumstances given. */ void logmsg(int pri, msg_t *pMsg, int flags) { char *msg; char PRItext[20]; assert(pMsg != NULL); assert(pMsg->pszUxTradMsg != NULL); msg = (char*) pMsg->pszUxTradMsg; dprintf("logmsg: %s, flags %x, from '%s', msg %s\n", textpri(PRItext, sizeof(PRItext) / sizeof(char), pri), flags, getRcvFrom(pMsg), msg); /* rger 2005-11-24 (happy thanksgiving!): we now need to check if we have * a traditional syslog message or one formatted according to syslog-protocol. * We need to apply different parsers depending on that. We use the * -protocol VERSION field for the detection. */ if(msg[0] == '1' && msg[1] == ' ') { dprintf("Message has syslog-protocol format.\n"); setProtocolVersion(pMsg, 1); if(parseRFCSyslogMsg(pMsg, flags) == 1) return; } else { /* we have legacy syslog */ dprintf("Message has legacy syslog format.\n"); setProtocolVersion(pMsg, 0); if(parseLegacySyslogMsg(pMsg, flags) == 1) return; } /* ---------------------- END PARSING ---------------- */ /* rgerhards, 2005-10-13: if we consider going multi-threaded, this * is probably the best point to split between a producer and a consumer * thread. In general, with the first multi-threaded approach, we should * NOT try to do more than have a single producer and consumer, at least * if both are from the current code base. The issue is that this code * was definitely not written with reentrancy in mind and uses a lot of * global variables. So it is very dangerous to simply go ahead and multi * thread it. However, I think there is a clear distinction between * producer (where data is received) and consumer (where the actions are). * It should be fairly safe to create a single thread for each and run them * concurrently, thightly coupled via an in-memory queue. Even with this * limited multithraeding, benefits are immediate: the lengthy actions * (database writes!) are de-coupled from the receivers, what should result * in less likely message loss (loss due to receiver overrun). It also allows * us to utilize 2-cpu systems, which will soon be common given the current * advances in multicore CPU hardware. So this is well worth trying. * Another plus of this two-thread-approach would be that it can easily be configured, * so if there are compatibility issues with the threading libs, we could simply * disable it (as a makefile feature). * There is one important thing to keep in mind when doing this basic * multithreading. The syslog/tcp message forwarder manipulates a structutre * that is used by the main thread, which actually sends the data. This * structure must be guarded by a mutex, else we will have race conditions and * some very bad things could happen. * * Additional consumer threads might be added relatively easy for new receivers, * e.g. if we decide to move RFC 3195 via liblogging natively into rsyslogd. * * To aid this functionality, I am moving the rest of the code (the actual * consumer) to its own method, now called "processMsg()". * * rgerhards, 2005-10-25: as of now, the dual-threading code is now in place. * It is an optional feature and even when enabled, rsyslogd will run single-threaded * if it gets any errors during thread creation. */ pMsg->msgFlags = flags; enqueueMsg(pMsg); } /* Helper to doSQLEscape. This is called if doSQLEscape * runs out of memory allocating the escaped string. * Then we are in trouble. We can * NOT simply return the unmodified string because this * may cause SQL injection. But we also can not simply * abort the run, this would be a DoS. I think an appropriate * measure is to remove the dangerous \' characters. We * replace them by \", which will break the message and * signatures eventually present - but this is the * best thing we can do now (or does anybody * have a better idea?). rgerhards 2004-11-23 * added support for "escapeMode" (so doSQLEscape for details). * if mode = 1, then backslashes are changed to slashes. * rgerhards 2005-09-22 */ void doSQLEmergencyEscape(register char *p, int escapeMode) { while(*p) { if(*p == '\'') *p = '"'; else if((escapeMode == 1) && (*p == '\\')) *p = '/'; ++p; } } /* SQL-Escape a string. Single quotes are found and * replaced by two of them. A new buffer is allocated * for the provided string and the provided buffer is * freed. The length is updated. Parameter pbMustBeFreed * is set to 1 if a new buffer is allocated. Otherwise, * it is left untouched. * -- * We just discovered a security issue. MySQL is so * "smart" to not only support the standard SQL mechanism * for escaping quotes, but to also provide its own (using * c-type syntax with backslashes). As such, it is actually * possible to do sql injection via rsyslogd. The cure is now * to escape backslashes, too. As we have found on the web, some * other databases seem to be similar "smart" (why do we have standards * at all if they are violated without any need???). Even better, MySQL's * smartness depends on config settings. So we add a new option to this * function that allows the caller to select if they want to standard or * "smart" encoding ;) * new parameter escapeMode is 0 - standard sql, 1 - "smart" engines * 2005-09-22 rgerhards */ void doSQLEscape(char **pp, size_t *pLen, unsigned short *pbMustBeFreed, int escapeMode) { char *p; int iLen; rsCStrObj *pStrB; uchar *pszGenerated; assert(pp != NULL); assert(*pp != NULL); assert(pLen != NULL); assert(pbMustBeFreed != NULL); /* first check if we need to do anything at all... */ if(escapeMode == 0) for(p = *pp ; *p && *p != '\'' ; ++p) ; else for(p = *pp ; *p && *p != '\'' && *p != '\\' ; ++p) ; /* when we get out of the loop, we are either at the * string terminator or the first \'. */ if(*p == '\0') return; /* nothing to do in this case! */ p = *pp; iLen = *pLen; if((pStrB = rsCStrConstruct()) == NULL) { /* oops - no mem ... Do emergency... */ doSQLEmergencyEscape(p, escapeMode); return; } while(*p) { if(*p == '\'') { if(rsCStrAppendChar(pStrB, (escapeMode == 0) ? '\'' : '\\') != RS_RET_OK) { doSQLEmergencyEscape(*pp, escapeMode); rsCStrFinish(pStrB); if((pszGenerated = rsCStrConvSzStrAndDestruct(pStrB)) != NULL) free(pszGenerated); return; } iLen++; /* reflect the extra character */ } else if((escapeMode == 1) && (*p == '\\')) { if(rsCStrAppendChar(pStrB, '\\') != RS_RET_OK) { doSQLEmergencyEscape(*pp, escapeMode); rsCStrFinish(pStrB); if((pszGenerated = rsCStrConvSzStrAndDestruct(pStrB)) != NULL) free(pszGenerated); return; } iLen++; /* reflect the extra character */ } if(rsCStrAppendChar(pStrB, *p) != RS_RET_OK) { doSQLEmergencyEscape(*pp, escapeMode); rsCStrFinish(pStrB); if((pszGenerated = rsCStrConvSzStrAndDestruct(pStrB)) != NULL) free(pszGenerated); return; } ++p; } rsCStrFinish(pStrB); if((pszGenerated = rsCStrConvSzStrAndDestruct(pStrB)) == NULL) { doSQLEmergencyEscape(*pp, escapeMode); return; } if(*pbMustBeFreed) free(*pp); /* discard previous value */ *pp = (char*) pszGenerated; *pLen = iLen; *pbMustBeFreed = 1; } /* create a string from the provided iovec. This can * be called by all functions who need the template * text in a single string. The function takes an * entry of the filed structure. It uses all data * from there. It returns a pointer to the generated * string if it succeeded, or NULL otherwise. * rgerhards 2004-11-22 */ char *iovAsString(selector_t *f) { struct iovec *v; int i; rsCStrObj *pStrB; assert(f != NULL); if(f->f_psziov != NULL) { /* for now, we always free a previous buffer. * The idea, however, is to keep a copy of the * buffer until we know we no longer can re-use it. */ free(f->f_psziov); } if((pStrB = rsCStrConstruct()) == NULL) { /* oops - no mem, let's try to set the message we have * most probably, this will fail, too. But at least we * can try... */ return NULL; } i = 0; f->f_iLenpsziov = 0; v = f->f_iov; while(i++ < f->f_iIovUsed) { if(v->iov_len > 0) { if(rsCStrAppendStr(pStrB, v->iov_base) != RS_RET_OK) { /* most probably out of memory... */ rsCStrDestruct(pStrB); return NULL; } f->f_iLenpsziov += v->iov_len; } ++v; } rsCStrFinish(pStrB); f->f_psziov = (char*) rsCStrConvSzStrAndDestruct(pStrB); return f->f_psziov; } /* rgerhards 2004-11-24: free the to-be-freed string in * iovec. Some strings point to read-only constants in the * msg object, these must not be taken care of. But some * are specifically created for this instance and those * must be freed before the next is created. This is done * here. After this method has been called, the iovec * string array is invalid and must either be totally * discarded or e-initialized! */ void iovDeleteFreeableStrings(selector_t *f) { register int i; assert(f != NULL); for(i = 0 ; i < f->f_iIovUsed ; ++i) { /* free to-be-freed strings in iovec */ if(*(f->f_bMustBeFreed + i)) { free((f->f_iov + i)->iov_base); *(f->f_bMustBeFreed) = 0; } } } /* rgerhards 2004-11-19: create the iovec for * a given message. This is called by all methods * using iovec's for their output. Returns the number * of iovecs used (might be different from max if the * template contains an invalid entry). */ void iovCreate(selector_t *f) { register struct iovec *v; int iIOVused; struct template *pTpl; struct templateEntry *pTpe; msg_t *pMsg; char *pVal; /* This variable must be introduced to keep with strict aliasing rules */ size_t iLenVal; /* This variable must be introduced to keep with strict aliasing rules */ assert(f != NULL); /* discard previous memory buffers */ iovDeleteFreeableStrings(f); pMsg = f->f_pMsg; pTpl = f->f_pTpl; v = f->f_iov; iIOVused = 0; pTpe = pTpl->pEntryRoot; while(pTpe != NULL) { if(pTpe->eEntryType == CONSTANT) { v->iov_base = pTpe->data.constant.pConstant; v->iov_len = pTpe->data.constant.iLenConstant; ++v; ++iIOVused; } else if(pTpe->eEntryType == FIELD) { /* Just for the records and because I needed some time to look it up again: * f->f_bMustBeFreed + iIOVused is a pointer to the "must be freed" indicator * for the entry in question. So, yes, we are passing in a pointer and it gets * updated by the called procedures. The address of operator (&) must NOT be used * because it already is a pointer. Actually, f->f_bMustBeFreed is the base address * of an array of unsigned shorts. This array is allocated when the configuration * file is read. rgerhards, 2007-06-26 */ pVal = MsgGetProp(pMsg, pTpe, NULL, f->f_bMustBeFreed + iIOVused); iLenVal = strlen(pVal); /* we now need to check if we should use SQL option. In this case, * we must go over the generated string and escape '\'' characters. * rgerhards, 2005-09-22: the option values below look somewhat misplaced, * but they are handled in this way because of legacy (don't break any * existing thing). */ if(f->f_pTpl->optFormatForSQL == 1) doSQLEscape(&pVal, &iLenVal, f->f_bMustBeFreed + iIOVused, 1); else if(f->f_pTpl->optFormatForSQL == 2) doSQLEscape(&pVal, &iLenVal, f->f_bMustBeFreed + iIOVused, 0); v->iov_base = pVal; v->iov_len = iLenVal; ++v; ++iIOVused; } pTpe = pTpe->pNext; } f->f_iIovUsed = iIOVused; #if 0 /* debug aid */ { int i; v = f->f_iov; for(i = 0 ; i < iIOVused ; ++i, ++v) { printf("iovCreate(%d), string '%s', mustbeFreed %d\n", i, v->iov_base, *(f->f_bMustBeFreed + i)); } } #endif /* debug aid */ return; } /* This functions converts a template into a string. It should * actually be in template.c, but this requires larger re-structuring * of the code (because all the property-access functions are static * to this module). I have placed it next to the iov*() functions, as * it is somewhat similiar in what it does. * * The function takes a pointer to a template and a pointer to a msg object. * It the creates a string based on the template definition. A pointer * to that string is returned to the caller. The caller MUST FREE that * pointer when it is no longer needed. If the function fails, NULL * is returned. * If memory allocation fails in this function, we silently return * NULL. The reason is that we can not do anything against it. And * if we raise an alert, the memory situation might become even * worse. So we prefer to let the caller deal with it. * rgerhards, 2007-07-03 */ static uchar *tplToString(struct template *pTpl, msg_t *pMsg) { struct templateEntry *pTpe; rsCStrObj *pCStr; unsigned short bMustBeFreed; char *pVal; size_t iLenVal; rsRetVal iRet; assert(pTpl != NULL); assert(pMsg != NULL); /* loop through the template. We obtain one value * and copy it over to our dynamic string buffer. Then, we * free the obtained value (if requested). We continue this * loop until we got hold of all values. */ if((pCStr = rsCStrConstruct()) == NULL) { dprintf("memory shortage, tplToString failed\n"); return NULL; } pTpe = pTpl->pEntryRoot; while(pTpe != NULL) { if(pTpe->eEntryType == CONSTANT) { if((iRet = rsCStrAppendStrWithLen(pCStr, (uchar *) pTpe->data.constant.pConstant, pTpe->data.constant.iLenConstant) ) != RS_RET_OK) { dprintf("error %d during tplToString()\n", iRet); /* it does not make sense to continue now */ rsCStrDestruct(pCStr); return NULL; } } else if(pTpe->eEntryType == FIELD) { pVal = (char*) MsgGetProp(pMsg, pTpe, NULL, &bMustBeFreed); iLenVal = strlen(pVal); /* we now need to check if we should use SQL option. In this case, * we must go over the generated string and escape '\'' characters. * rgerhards, 2005-09-22: the option values below look somewhat misplaced, * but they are handled in this way because of legacy (don't break any * existing thing). */ if(pTpl->optFormatForSQL == 1) doSQLEscape(&pVal, &iLenVal, &bMustBeFreed, 1); else if(pTpl->optFormatForSQL == 2) doSQLEscape(&pVal, &iLenVal, &bMustBeFreed, 0); /* value extracted, so lets copy */ if((iRet = rsCStrAppendStrWithLen(pCStr, (uchar*) pVal, iLenVal)) != RS_RET_OK) { dprintf("error %d during tplToString()\n", iRet); /* it does not make sense to continue now */ rsCStrDestruct(pCStr); if(bMustBeFreed) free(pVal); return NULL; } if(bMustBeFreed) free(pVal); } pTpe = pTpe->pNext; } /* we are done with the template, now let's convert the result into a * "real" (usable) string and discard the helper structures. */ rsCStrFinish(pCStr); return rsCStrConvSzStrAndDestruct(pCStr); } /* rgerhards 2005-06-21: Try to resolve a size limit * situation. This first runs the command, and then * checks if we are still above the treshold. * returns 0 if ok, 1 otherwise * TODO: consider moving the initial check in here, too */ int resolveFileSizeLimit(selector_t *f) { off_t actualFileSize; assert(f != NULL); if(f->f_un.f_file.f_sizeLimitCmd == NULL) return 1; /* nothing we can do in this case... */ /* TODO: this is a really quick hack. We need something more * solid when it goes into production. This was just to see if * the overall idea works (I hope it won't survive...). * rgerhards 2005-06-21 */ system(f->f_un.f_file.f_sizeLimitCmd); f->f_file = open(f->f_un.f_file.f_fname, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY, f->f_un.f_file.fCreateMode); actualFileSize = lseek(f->f_file, 0, SEEK_END); if(actualFileSize >= f->f_un.f_file.f_sizeLimit) { /* OK, it didn't work out... */ return 1; } return 0; } /* This function deletes an entry from the dynamic file name * cache. A pointer to the cache must be passed in as well * as the index of the to-be-deleted entry. This index may * point to an unallocated entry, in whcih case the * function immediately returns. Parameter bFreeEntry is 1 * if the entry should be free()ed and 0 if not. */ static void dynaFileDelCacheEntry(dynaFileCacheEntry **pCache, int iEntry, int bFreeEntry) { assert(pCache != NULL); if(pCache[iEntry] == NULL) return; dprintf("Removed entry %d for file '%s' from dynaCache.\n", iEntry, pCache[iEntry]->pName == NULL ? "[OPEN FAILED]" : (char*)pCache[iEntry]->pName); /* if the name is NULL, this is an improperly initilized entry which * needs to be discarded. In this case, neither the file is to be closed * not the name to be freed. */ if(pCache[iEntry]->pName != NULL) { close(pCache[iEntry]->fd); free(pCache[iEntry]->pName); pCache[iEntry]->pName = NULL; } if(bFreeEntry) { free(pCache[iEntry]); pCache[iEntry] = NULL; } } /* This function frees the dynamic file name cache. */ static void dynaFileFreeCache(selector_t *f) { register int i; assert(f != NULL); for(i = 0 ; i < f->f_un.f_file.iCurrCacheSize ; ++i) { dynaFileDelCacheEntry(f->f_un.f_file.dynCache, i, 1); } free(f->f_un.f_file.dynCache); } /* This function handles dynamic file names. It generates a new one * based on the current message, checks if that file is already open * and, if not, does everything needed to switch to the new one. * Function returns 0 if all went well and non-zero otherwise. * On successful return f->f_file must point to the correct file to * be written. * This is a helper to writeFile(). rgerhards, 2007-07-03 */ static int prepareDynFile(selector_t *f) { uchar *newFileName; time_t ttOldest; /* timestamp of oldest element */ int iOldest; int i; int iFirstFree; dynaFileCacheEntry **pCache; assert(f != NULL); if((newFileName = tplToString(f->f_un.f_file.pTpl, f->f_pMsg)) == NULL) { /* memory shortage - there is nothing we can do to resolve it. * We silently ignore it, this is probably the best we can do. */ glblHadMemShortage = TRUE; dprintf("prepareDynfile(): could not create file name, discarding this request\n"); return -1; } pCache = f->f_un.f_file.dynCache; /* first check, if we still have the current file * I *hope* this will be a performance enhancement. */ if( (f->f_un.f_file.iCurrElt != -1) && !strcmp((char*) newFileName, (char*) pCache[f->f_un.f_file.iCurrElt])) { /* great, we are all set */ free(newFileName); pCache[f->f_un.f_file.iCurrElt]->lastUsed = time(NULL); /* update timestamp for LRU */ return 0; } /* ok, no luck. Now let's search the table if we find a matching spot. * While doing so, we also prepare for creation of a new one. */ iFirstFree = -1; /* not yet found */ iOldest = 0; /* we assume the first element to be the oldest - that will change as we loop */ ttOldest = time(NULL) + 1; /* there must always be an older one */ for(i = 0 ; i < f->f_un.f_file.iCurrCacheSize ; ++i) { if(pCache[i] == NULL) { if(iFirstFree == -1) iFirstFree = i; } else { /* got an element, let's see if it matches */ if(!strcmp((char*) newFileName, (char*) pCache[i]->pName)) { /* we found our element! */ f->f_file = pCache[i]->fd; f->f_un.f_file.iCurrElt = i; free(newFileName); pCache[i]->lastUsed = time(NULL); /* update timestamp for LRU */ return 0; } /* did not find it - so lets keep track of the counters for LRU */ if(pCache[i]->lastUsed < ttOldest) { ttOldest = pCache[i]->lastUsed; iOldest = i; } } } /* we have not found an entry */ if(iFirstFree == -1 && (f->f_un.f_file.iCurrCacheSize < f->f_un.f_file.iDynaFileCacheSize)) { /* there is space left, so set it to that index */ iFirstFree = f->f_un.f_file.iCurrCacheSize++; } if(iFirstFree == -1) { dynaFileDelCacheEntry(pCache, iOldest, 0); iFirstFree = iOldest; /* this one *is* now free ;) */ } else { /* we need to allocate memory for the cache structure */ pCache[iFirstFree] = (dynaFileCacheEntry*) calloc(1, sizeof(dynaFileCacheEntry)); if(pCache[iFirstFree] == NULL) { glblHadMemShortage = TRUE; dprintf("prepareDynfile(): could not alloc mem, discarding this request\n"); free(newFileName); return -1; } } /* Ok, we finally can open the file */ f->f_file = open((char*) newFileName, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY, f->f_un.f_file.fCreateMode); if(f->f_file == -1) { /* do not report anything if the message is an internally-generated * message. Otherwise, we could run into a never-ending loop. The bad * news is that we also loose errors on startup messages, but so it is. */ if(f->f_pMsg->msgFlags & INTERNAL_MSG) dprintf("Could not open dynaFile, discarding message\n"); else logerrorSz("Could not open dynamic file '%s' - discarding message", (char*)newFileName); free(newFileName); dynaFileDelCacheEntry(pCache, iFirstFree, 1); return -1; } pCache[iFirstFree]->fd = f->f_file; pCache[iFirstFree]->pName = newFileName; pCache[iFirstFree]->lastUsed = time(NULL); f->f_un.f_file.iCurrElt = iFirstFree; dprintf("Added new entry %d for file cache, file '%s'.\n", iFirstFree, newFileName); return 0; } /* rgerhards 2004-11-11: write to a file output. This * will be called for all outputs using file semantics, * for example also for pipes. */ void writeFile(selector_t *f) { off_t actualFileSize; assert(f != NULL); /* first check if we have a dynamic file name and, if so, * check if it still is ok or a new file needs to be created */ if(f->f_un.f_file.bDynamicName) { if(prepareDynFile(f) != 0) return; } /* create the message based on format specified */ iovCreate(f); again: /* check if we have a file size limit and, if so, * obey to it. */ if(f->f_un.f_file.f_sizeLimit != 0) { actualFileSize = lseek(f->f_file, 0, SEEK_END); if(actualFileSize >= f->f_un.f_file.f_sizeLimit) { char errMsg[256]; /* for now, we simply disable a file once it is * beyond the maximum size. This is better than having * us aborted by the OS... rgerhards 2005-06-21 */ (void) close(f->f_file); /* try to resolve the situation */ if(resolveFileSizeLimit(f) != 0) { /* didn't work out, so disable... */ f->f_type = F_UNUSED; snprintf(errMsg, sizeof(errMsg), "no longer writing to file %s; grown beyond configured file size of %lld bytes, actual size %lld - configured command did not resolve situation", f->f_un.f_file.f_fname, (long long) f->f_un.f_file.f_sizeLimit, (long long) actualFileSize); errno = 0; logerror(errMsg); return; } else { snprintf(errMsg, sizeof(errMsg), "file %s had grown beyond configured file size of %lld bytes, actual size was %lld - configured command resolved situation", f->f_un.f_file.f_fname, (long long) f->f_un.f_file.f_sizeLimit, (long long) actualFileSize); errno = 0; logerror(errMsg); } } } if (writev(f->f_file, f->f_iov, f->f_iIovUsed) < 0) { int e = errno; /* If a named pipe is full, just ignore it for now - mrn 24 May 96 */ if (f->f_type == F_PIPE && e == EAGAIN) return; (void) close(f->f_file); /* * Check for EBADF on TTY's due to vhangup() * Linux uses EIO instead (mrn 12 May 96) */ if ((f->f_type == F_TTY || f->f_type == F_CONSOLE) #ifdef linux && e == EIO) { #else && e == EBADF) { #endif f->f_file = open(f->f_un.f_file.f_fname, O_WRONLY|O_APPEND|O_NOCTTY); if (f->f_file < 0) { f->f_type = F_UNUSED; logerror(f->f_un.f_file.f_fname); } else { untty(); goto again; } } else { f->f_type = F_UNUSED; errno = e; logerror(f->f_un.f_file.f_fname); } } else if (f->f_flags & SYNC_FILE) fsync(f->f_file); } /* rgerhards 2004-11-09: fprintlog() is the actual driver for * the output channel. It receives the channel description (f) as * well as the message and outputs them according to the channel * semantics. The message is typically already contained in the * channel save buffer (f->f_prevline). This is not only the case * when a message was already repeated but also when a new message * arrived. Parameter "msg", which sounds like the message content, * actually contains the message only in those few cases where it * was too large to fit into the channel save buffer. * * This whole function is probably about to change once we have the * message abstraction. */ void fprintlog(register selector_t *f) { char *psz; /* for shell support */ int esize; /* for shell support */ uchar *exec; /* for shell support */ rsCStrObj *pCSCmdLine; /* for shell support: command to execute */ rsRetVal iRet; register int l; msg_t *pMsgSave; /* to save current message pointer, necessary to restore it in case it needs to be updated (e.g. repeated msgs) */ #ifdef SYSLOG_INET int e, i, lsent = 0; int bSendSuccess; time_t fwd_suspend; struct addrinfo *res, *r; struct addrinfo hints; #endif pMsgSave = NULL; /* indicate message poiner not saved */ /* first check if this is a regular message or the repeation of * a previous message. If so, we need to change the message text * to "last message repeated n times" and then go ahead and write * it. Please note that we can not modify the message object, because * that would update it in other selectors as well. As such, we first * need to create a local copy of the message, which we than can update. * rgerhards, 2007-07-10 */ if(f->f_prevcount > 1) { msg_t *pMsg; uchar szRepMsg[64]; snprintf((char*)szRepMsg, sizeof(szRepMsg), "last message repeated %d times", f->f_prevcount); if((pMsg = MsgDup(f->f_pMsg)) == NULL) { /* it failed - nothing we can do against it... */ dprintf("Message duplication failed, dropping repeat message.\n"); return; } /* We now need to update the other message properties. * ... RAWMSG is a problem ... Please note that digital * signatures inside the message are also invalidated. */ getCurrTime(&(pMsg->tRcvdAt)); getCurrTime(&(pMsg->tTIMESTAMP)); MsgSetMSG(pMsg, (char*)szRepMsg); MsgSetRawMsg(pMsg, (char*)szRepMsg); pMsgSave = f->f_pMsg; /* save message pointer for later restoration */ f->f_pMsg = pMsg; /* use the new msg (pointer will be restored below) */ } dprintf("Called fprintlog, logging to %s", TypeNames[f->f_type]); switch (f->f_type) { case F_UNUSED: f->f_time = now; dprintf("\n"); break; #ifdef SYSLOG_INET case F_FORW_SUSP: fwd_suspend = time(NULL) - f->f_time; if ( fwd_suspend >= INET_SUSPEND_TIME ) { dprintf("\nForwarding suspension over, retrying FORW "); f->f_type = F_FORW; goto f_forw; } else { dprintf(" %s\n", f->f_un.f_forw.f_hname); dprintf("Forwarding suspension not over, time left: %d.\n", INET_SUSPEND_TIME - fwd_suspend); } break; /* The trick is to wait some time, then retry to get the * address. If that fails retry x times and then give up. * * You'll run into this problem mostly if the name server you * need for resolving the address is on the same machine, but * is started after syslogd. */ case F_FORW_UNKN: /* The remote address is not yet known and needs to be obtained */ dprintf(" %s\n", f->f_un.f_forw.f_hname); fwd_suspend = time(NULL) - f->f_time; if(fwd_suspend >= INET_SUSPEND_TIME) { dprintf("Forwarding suspension to unknown over, retrying\n"); memset(&hints, 0, sizeof(hints)); /* port must be numeric, because config file syntax requests this */ /* TODO: this code is a duplicate from cfline() - we should later create * a common function. */ hints.ai_flags = AI_NUMERICSERV; hints.ai_family = family; hints.ai_socktype = f->f_un.f_forw.protocol == FORW_UDP ? SOCK_DGRAM : SOCK_STREAM; if((e = getaddrinfo(f->f_un.f_forw.f_hname, getFwdSyslogPt(f), &hints, &res)) != 0) { dprintf("Failure: %s\n", sys_h_errlist[h_errno]); dprintf("Retries: %d\n", f->f_prevcount); if ( --f->f_prevcount < 0 ) { dprintf("Giving up.\n"); f->f_type = F_UNUSED; } else dprintf("Left retries: %d\n", f->f_prevcount); } else { dprintf("%s found, resuming.\n", f->f_un.f_forw.f_hname); f->f_un.f_forw.f_addr = res; f->f_prevcount = 0; f->f_type = F_FORW; goto f_forw; } } else dprintf("Forwarding suspension not over, time " \ "left: %d\n", INET_SUSPEND_TIME - fwd_suspend); break; case F_FORW: f_forw: dprintf(" %s:%s/%s\n", f->f_un.f_forw.f_hname, getFwdSyslogPt(f), f->f_un.f_forw.protocol == FORW_UDP ? "udp" : "tcp"); iovCreate(f); if ( strcmp(getHOSTNAME(f->f_pMsg), LocalHostName) && NoHops ) dprintf("Not sending message to remote.\n"); else { char *psz; f->f_time = now; psz = iovAsString(f); l = f->f_iLenpsziov; if (l > MAXLINE) l = MAXLINE; # ifdef USE_NETZIP /* Check if we should compress and, if so, do it. We also * check if the message is large enough to justify compression. * The smaller the message, the less likely is a gain in compression. * To save CPU cycles, we do not try to compress very small messages. * What "very small" means needs to be configured. Currently, it is * hard-coded but this may be changed to a config parameter. * rgerhards, 2006-11-30 */ if(f->f_un.f_forw.compressionLevel && (l > MIN_SIZE_FOR_COMPRESS)) { Bytef out[MAXLINE+MAXLINE/100+12] = "z"; uLongf destLen = sizeof(out) / sizeof(Bytef); uLong srcLen = l; int ret; ret = compress2((Bytef*) out+1, &destLen, (Bytef*) psz, srcLen, f->f_un.f_forw.compressionLevel); dprintf("Compressing message, length was %d now %d, return state %d.\n", l, (int) destLen, ret); if(ret != Z_OK) { /* if we fail, we complain, but only in debug mode * Otherwise, we are silent. In any case, we ignore the * failed compression and just sent the uncompressed * data, which is still valid. So this is probably the * best course of action. * rgerhards, 2006-11-30 */ dprintf("Compression failed, sending uncompressed message\n"); } else if(destLen+1 < l) { /* only use compression if there is a gain in using it! */ dprintf("there is gain in compression, so we do it\n"); psz = (char*) out; l = destLen + 1; /* take care for the "z" at message start! */ } ++destLen; } # endif if(f->f_un.f_forw.protocol == FORW_UDP) { /* forward via UDP */ if(finet != NULL) { /* we need to track if we have success sending to the remote * peer. Success is indicated by at least one sendto() call * succeeding. We track this be bSendSuccess. We can not simply * rely on lsent, as a call might initially work, but a later * call fails. Then, lsent has the error status, even though * the sendto() succeeded. * rgerhards, 2007-06-22 */ bSendSuccess = FALSE; for (r = f->f_un.f_forw.f_addr; r; r = r->ai_next) { for (i = 0; i < *finet; i++) { lsent = sendto(finet[i+1], psz, l, 0, r->ai_addr, r->ai_addrlen); if (lsent == l) { bSendSuccess = TRUE; break; } else { int e = errno; dprintf("sendto() error: %d = %s.\n", e, strerror(e)); } } if (lsent == l && !send_to_all) break; } /* finished looping */ if (bSendSuccess == FALSE) { f->f_type = F_FORW_SUSP; errno = 0; logerror("error forwarding via udp, suspending"); } } } else { /* forward via TCP */ if(TCPSend(f, psz, l) != 0) { /* error! */ f->f_type = F_FORW_SUSP; errno = 0; logerror("error forwarding via tcp, suspending..."); } } } break; #endif case F_CONSOLE: f->f_time = now; /* FALLTHROUGH */ case F_TTY: case F_FILE: case F_PIPE: dprintf(" (%s)\n", f->f_un.f_file.f_fname); f->f_time = now; /* we need this for message repeation processing */ /* f->f_file == -1 is an indicator that the we couldn't * open the file at startup. For dynaFiles, this is ok, * all others are doomed. */ if(f->f_un.f_file.bDynamicName || (f->f_file != -1)) writeFile(f); break; case F_USERS: case F_WALL: f->f_time = now; dprintf("\n"); wallmsg(f); break; #ifdef WITH_DB case F_MYSQL: f->f_time = now; dprintf("\n"); writeMySQL(f); break; #endif case F_SHELL: /* shell support by bkalkbrenner 2005-09-20 */ f->f_time = now; iovCreate(f); psz = iovAsString(f); l = f->f_iLenpsziov; if (l > MAXLINE) l = MAXLINE; esize = strlen(f->f_un.f_file.f_fname) + strlen(psz) + 4; if((pCSCmdLine = rsCStrConstruct()) == NULL) { /* nothing smart we can do - just keep going... */ dprintf("memory shortage - can not execute\n"); break; } if((iRet = rsCStrAppendStr(pCSCmdLine, (uchar*) f->f_un.f_file.f_fname)) != RS_RET_OK) { dprintf("error %d during build command line(1)\n", iRet); break; } if((iRet = rsCStrAppendStr(pCSCmdLine, (uchar*) " \"")) != RS_RET_OK) { dprintf("error %d during build command line(2)\n", iRet); break; } /* now copy the message as parameter but escape dangerous things. * we probably have not taken care of everything an attacker might * think of, so execute shell *is* a dangerous command. * rgerhards 2005-09-22 */ while(*psz) { if(*psz == '"' || *psz == '\\') if((iRet = rsCStrAppendChar(pCSCmdLine, '\\')) != RS_RET_OK) { dprintf("error %d during build command line(3)\n", iRet); break; } if((iRet = rsCStrAppendChar(pCSCmdLine, *psz)) != RS_RET_OK) { dprintf("error %d during build command line(4)\n", iRet); break; } ++psz; } if((iRet = rsCStrAppendChar(pCSCmdLine, '"')) != RS_RET_OK) { dprintf("error %d during build command line(5)\n", iRet); break; } rsCStrFinish(pCSCmdLine); exec = rsCStrConvSzStrAndDestruct(pCSCmdLine); dprintf("Executing \"%s\"\n",exec); system((char*) exec); /* rgerhards: TODO: need to change this for root jail support! */ free(exec); break; } /* switch */ if (f->f_type != F_FORW_UNKN) f->f_prevcount = 0; if(pMsgSave != NULL) { /* we had saved the original message pointer. That was * done because we needed to create a temporary one * (most often for "message repeated n time" handling. If so, * we need to restore the original one now, so that procesing * can continue as normal. We also need to discard the temporary * one, as we do not like memory leaks ;) Please note that the original * message object will be discarded by our callers, so this is nothing * of our buisiness. rgerhards, 2007-07-10 */ MsgDestruct(f->f_pMsg); f->f_pMsg = pMsgSave; /* restore it */ } return; } jmp_buf ttybuf; static void endtty() { longjmp(ttybuf, 1); } /** * BSD setutent/getutent() replacement routines * The following routines emulate setutent() and getutent() under * BSD because they are not available there. We only emulate what we actually * need! rgerhards 2005-03-18 */ #ifdef BSD static FILE *BSD_uf = NULL; void setutent(void) { assert(BSD_uf == NULL); if ((BSD_uf = fopen(_PATH_UTMP, "r")) == NULL) { logerror(_PATH_UTMP); return; } } struct utmp* getutent(void) { static struct utmp st_utmp; if(fread((char *)&st_utmp, sizeof(st_utmp), 1, BSD_uf) != 1) return NULL; return(&st_utmp); } void endutent(void) { fclose(BSD_uf); BSD_uf = NULL; } #endif /* * WALLMSG -- Write a message to the world at large * * Write the specified message to either the entire * world, or a list of approved users. * * rgerhards, 2005-10-19: applying the following sysklogd patch: * Tue May 4 16:52:01 CEST 2004: Solar Designer * Adjust the size of a variable to prevent a buffer overflow * should _PATH_DEV ever contain something different than "/dev/". */ static void wallmsg(register selector_t *f) { char p[sizeof(_PATH_DEV) + UNAMESZ]; register int i; int ttyf; static int reenter = 0; struct utmp ut; struct utmp *uptr; assert(f != NULL); if (reenter++) return; iovCreate(f); /* init the iovec */ /* open the user login file */ setutent(); /* * Might as well fork instead of using nonblocking I/O * and doing notty(). */ if (fork() == 0) { signal(SIGTERM, SIG_DFL); alarm(0); # ifdef SIGTTOU signal(SIGTTOU, SIG_IGN); # endif sigsetmask(0); /* TODO: find a way to limit the max size of the message. hint: this * should go into the template! */ /* rgerhards 2005-10-24: HINT: this code might be run in a seperate thread * instead of a seperate process once we have multithreading... */ /* scan the user login file */ while ((uptr = getutent())) { memcpy(&ut, uptr, sizeof(ut)); /* is this slot used? */ if (ut.ut_name[0] == '\0') continue; #ifndef BSD if (ut.ut_type != USER_PROCESS) continue; #endif if (!(strncmp (ut.ut_name,"LOGIN", 6))) /* paranoia */ continue; /* should we send the message to this user? */ if (f->f_type == F_USERS) { for (i = 0; i < MAXUNAMES; i++) { if (!f->f_un.f_uname[i][0]) { i = MAXUNAMES; break; } if (strncmp(f->f_un.f_uname[i], ut.ut_name, UNAMESZ) == 0) break; } if (i >= MAXUNAMES) continue; } /* compute the device name */ strcpy(p, _PATH_DEV); strncat(p, ut.ut_line, UNAMESZ); if (setjmp(ttybuf) == 0) { (void) signal(SIGALRM, endtty); (void) alarm(15); /* open the terminal */ ttyf = open(p, O_WRONLY|O_NOCTTY); if (ttyf >= 0) { struct stat statb; if (fstat(ttyf, &statb) == 0 && (statb.st_mode & S_IWRITE)) (void) writev(ttyf, f->f_iov, f->f_iIovUsed); close(ttyf); ttyf = -1; } } (void) alarm(0); } exit(0); /* "good" exit - this terminates the child forked just for message delivery */ } /* close the user login file */ endutent(); reenter = 0; } static void reapchild() { int saved_errno = errno; signal(SIGCHLD, reapchild); /* reset signal handler -ASP */ wait(NULL); errno = saved_errno; } /* Return a printable representation of a host address. */ static char *cvthname(struct sockaddr_storage *f) { register char *p; int count, error; sigset_t omask, nmask; /* TODO: check - the static below may be problematic in * multi-threading. rgerhards, 2007-06-22 */ static char hname[NI_MAXHOST], ip[NI_MAXHOST]; error = getnameinfo((struct sockaddr *)f, sizeof(*f), ip, sizeof ip, NULL, 0, NI_NUMERICHOST); dprintf("cvthname(%s)\n", ip); if (error) { dprintf("Malformed from address %s\n", gai_strerror(error)); return ("???"); } if (!DisableDNS) { sigemptyset(&nmask); sigaddset(&nmask, SIGHUP); sigprocmask(SIG_BLOCK, &nmask, &omask); error = getnameinfo((struct sockaddr *)f, sizeof(*f), hname, sizeof hname, NULL, 0, NI_NAMEREQD); sigprocmask(SIG_SETMASK, &omask, NULL); } if (error || DisableDNS) { dprintf("Host name for your address (%s) unknown\n", ip); return (ip); } /* Convert to lower case, just like LocalDomain above */ for (p = (char *) hname; *p ; p++) if (isupper((int) *p)) *p = tolower(*p); /* Notice that the string still contains the fqdn, but your * hostname and domain are separated by a '\0'. */ if ((p = strchr(hname, '.'))) { if (strcmp(p + 1, LocalDomain) == 0) { *p = '\0'; return (hname); } else { if (StripDomains) { count=0; while (StripDomains[count]) { if (strcmp(p + 1, StripDomains[count]) == 0) { *p = '\0'; return (hname); } count++; } } if (LocalHosts) { count=0; while (LocalHosts[count]) { if (!strcmp(hname, LocalHosts[count])) { *p = '\0'; return (hname); } count++; } } } } return (hname); } /* This method writes mark messages and - some time later - flushes reapeat * messages (not doing this currently). * This method was initially called by an alarm handler. As such, it could potentially * have race-conditons. For details, see * http://lkml.org/lkml/2005/3/26/37 * http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=301511 * I have now changed it so that the alarm handler only sets a global variable, telling * the main thread that it must do mark processing. So domark() is now called from the * main thread itself, which is the only thing to make sure rsyslogd will not do * strange things. The way it originally was seemed to work because mark occurs very * seldom. However, the code called was anything else but reentrant, so it was like * russian roulette. * rgerhards, 2005-10-20 */ static void domark(void) { register selector_t *f; if (MarkInterval > 0) { now = time(0); MarkSeq += TIMERINTVL; if (MarkSeq >= MarkInterval) { logmsgInternal(LOG_INFO, "-- MARK --", LocalHostName, ADDDATE|MARK); MarkSeq = 0; } /* see if we need to flush any "message repeated n times"... */ for (f = Files; f != NULL ; f = f->f_next) { if (f->f_prevcount && now >= REPEATTIME(f)) { dprintf("flush %s: repeated %d times, %d sec.\n", TypeNames[f->f_type], f->f_prevcount, repeatinterval[f->f_repeatcount]); fprintlog(f); BACKOFF(f); } } } } /* This is the alarm handler setting the global variable for * domark request. See domark() comments for further details. * rgerhards, 2005-10-20 */ static void domarkAlarmHdlr() { bRequestDoMark = 1; /* request alarm */ (void) signal(SIGALRM, domarkAlarmHdlr); (void) alarm(TIMERINTVL); } static void debug_switch() { dprintf("Switching debugging_on to %s\n", (debugging_on == 0) ? "true" : "false"); debugging_on = (debugging_on == 0) ? 1 : 0; signal(SIGUSR1, debug_switch); } /* * Add a string to error message and send it to logerror() * The error message is passed to snprintf() and must be * correctly formatted for it (containing a single %s param). * rgerhards 2005-09-19 */ void logerrorSz(char *type, char *errMsg) { char buf[1024]; snprintf(buf, sizeof(buf), type, errMsg); buf[sizeof(buf)/sizeof(char) - 1] = '\0'; /* just to be on the safe side... */ logerror(buf); return; } /* * Add an integer to error message and send it to logerror() * The error message is passed to snprintf() and must be * correctly formatted for it (containing a single %d param). * rgerhards 2005-09-19 */ void logerrorInt(char *type, int errCode) { char buf[1024]; snprintf(buf, sizeof(buf), type, errCode); buf[sizeof(buf)/sizeof(char) - 1] = '\0'; /* just to be on the safe side... */ logerror(buf); return; } /* Print syslogd errors some place. */ void logerror(char *type) { char buf[1024]; dprintf("Called logerr, msg: %s\n", type); if (errno == 0) snprintf(buf, sizeof(buf), "%s", type); else snprintf(buf, sizeof(buf), "%s: %s", type, strerror(errno)); buf[sizeof(buf)/sizeof(char) - 1] = '\0'; /* just to be on the safe side... */ errno = 0; logmsgInternal(LOG_SYSLOG|LOG_ERR, buf, LocalHostName, ADDDATE); return; } /* doDie() is a signal handler. If called, it sets the bFinished variable * to indicate the program should terminate. However, it does not terminate * it itself, because that causes issues with multi-threading. The actual * termination is then done on the main thread. This solution might introduce * a minimal delay, but it is much cleaner than the approach of doing everything * inside the signal handler. * rgerhards, 2005-10-26 */ static void doDie(int sig) { dprintf("DoDie called.\n"); bFinished = sig; } /* die() is called when the program shall end. This typically only occurs * during sigterm or during the initialization. If you search for places where * it is called, search for "die", not "die(", because the later will not find * setting of signal handlers! As die() is intended to shutdown rsyslogd, it is * safe to call exit() here. Just make sure that die() itself is not called * at inapropriate places. As a general rule of thumb, it is a bad idea to add * any calls to die() in new code! * rgerhards, 2005-10-24 */ static void die(int sig) { register selector_t *f; char buf[256]; int i; int was_initialized = Initialized; Initialized = 0; /* Don't log SIGCHLDs in case we receive one during exiting */ for (f = Files; f != NULL ; f = f->f_next) { /* flush any pending output */ if (f->f_prevcount) fprintlog(f); } Initialized = was_initialized; /* we restore this so that the logmsgInternal() * below can work ... and keep in mind we need the * filed structure still intact (initialized) for the below! */ if (sig) { dprintf(" exiting on signal %d\n", sig); (void) snprintf(buf, sizeof(buf) / sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ "\" x-pid=\"%d\"]" " exiting on signal %d.", (int) myPid, sig); errno = 0; logmsgInternal(LOG_SYSLOG|LOG_INFO, buf, LocalHostName, ADDDATE); } #ifdef USE_PTHREADS stopWorker(); queueDelete(pMsgQueue); /* delete fifo here! */ pMsgQueue = 0; #endif /* Free ressources and close MySQL connections */ for (f = Files; f != NULL ; f = f->f_next) { /* free iovec if it was allocated */ if(f->f_iov != NULL) { if(f->f_bMustBeFreed != NULL) { iovDeleteFreeableStrings(f); free(f->f_bMustBeFreed); } free(f->f_iov); } /* Now delete cached messages */ if(f->f_pMsg != NULL) MsgDestruct(f->f_pMsg); #ifdef WITH_DB if (f->f_type == F_MYSQL) closeMySQL(f); #endif } /* now clean up the listener part */ #ifdef SYSLOG_INET /* Close the UNIX sockets. */ for (i = 0; i < nfunix; i++) if (funix[i] != -1) close(funix[i]); /* Close the UDP inet socket. */ closeUDPListenSockets(); /* Close the TCP inet socket. */ if(sockTCPLstn != NULL && *sockTCPLstn) { deinit_tcp_listener(); } #endif /* Clean-up files. */ for (i = 0; i < nfunix; i++) if (funixn[i] && funix[i] != -1) (void)unlink(funixn[i]); /* rger 2005-02-22 * now clean up the in-memory structures. OK, the OS * would also take care of that, but if we do it * ourselfs, this makes finding memory leaks a lot * easier. */ tplDeleteAll(); free(Files); if(consfile.f_iov != NULL) free(consfile.f_iov); if(consfile.f_bMustBeFreed != NULL) free(consfile.f_bMustBeFreed); #ifndef TESTING remove_pid(PidFile); #endif dprintf("Clean shutdown completed, bye.\n"); exit(0); /* "good" exit, this is the terminator function for rsyslog [die()] */ } /* * Signal handler to terminate the parent process. * rgerhards, 2005-10-24: this is only called during forking of the * detached syslogd. I consider this method to be safe. */ #ifndef TESTING static void doexit(int sig) { exit(0); /* "good" exit, only during child-creation */ } #endif /* parse an allowed sender config line and add the allowed senders * (if the line is correct). * rgerhards, 2005-09-27 */ static rsRetVal addAllowedSenderLine(char* pName, uchar** ppRestOfConfLine) { #ifdef SYSLOG_INET struct AllowedSenders **ppRoot; struct AllowedSenders **ppLast; rsParsObj *pPars; rsRetVal iRet; unsigned long uIP; int iBits; #endif assert(pName != NULL); assert(ppRestOfConfLine != NULL); assert(*ppRestOfConfLine != NULL); #ifndef SYSLOG_INET errno = 0; logerror("config file contains allowed sender list, but rsyslogd " "compiled without Internet support - line ignored"); return RS_RET_ERR; #else if(!strcasecmp(pName, "udp")) { ppRoot = &pAllowedSenders_UDP; ppLast = &pLastAllowedSenders_UDP; } else if(!strcasecmp(pName, "tcp")) { ppRoot = &pAllowedSenders_TCP; ppLast = &pLastAllowedSenders_TCP; } else { logerrorSz("Invalid protocol '%s' in allowed sender " "list, line ignored", pName); return RS_RET_ERR; } /* OK, we now know the protocol and have valid list pointers. * So let's process the entries. We are using the parse class * for this. */ /* create parser object starting with line string without leading colon */ if((iRet = rsParsConstructFromSz(&pPars, (uchar*) *ppRestOfConfLine) != RS_RET_OK)) { logerrorInt("Error %d constructing parser object - ignoring allowed sender list", iRet); return(iRet); } while(!parsIsAtEndOfParseString(pPars)) { if(parsPeekAtCharAtParsPtr(pPars) == '#') break; /* a comment-sign stops processing of line */ /* now parse a single IP address */ if((iRet = parsIPv4WithBits(pPars, &uIP, &iBits)) != RS_RET_OK) { logerrorInt("Error %d parsing IP address in allowed sender" "list - ignoring.", iRet); rsParsDestruct(pPars); return(iRet); } if((iRet = AddAllowedSender(ppRoot, ppLast, uIP, iBits)) != RS_RET_OK) { logerrorInt("Error %d adding allowed sender entry " "- ignoring.", iRet); rsParsDestruct(pPars); return(iRet); } } /* cleanup */ *ppRestOfConfLine += parsGetCurrentPosition(pPars); return rsParsDestruct(pPars); #endif /*#ifndef SYSLOG_INET */ } /* skip over whitespace in a standard C string. The * provided pointer is advanced to the first non-whitespace * charater or the \0 byte, if there is none. It is never * moved past the \0. */ static void skipWhiteSpace(uchar **pp) { register uchar *p; assert(pp != NULL); assert(*pp != NULL); p = *pp; while(*p && isspace((int) *p)) ++p; *pp = p; } /* Parse and interpret a $DynaFileCacheSize line. * Parameter **pp has a pointer to the current config line. * On exit, it will be updated to the processed position. * rgerhards, 2007-07-4 (happy independence day to my US friends!) */ static void doDynaFileCacheSizeLine(uchar **pp, enum eDirective eDir) { uchar *p; uchar errMsg[128]; /* for dynamic error messages */ int i; assert(pp != NULL); assert(*pp != NULL); skipWhiteSpace(pp); /* skip over any whitespace */ p = *pp; if(!isdigit((int) *p)) { snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar), "DynaFileCacheSize invalid, value '%s'.", p); errno = 0; logerror((char*) errMsg); return; } /* pull value */ for(i = 0 ; *p && isdigit((int) *p) ; ++p) i = i * 10 + *p - '0'; if(i < 1) { snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar), "DynaFileCacheSize must be greater 0 (%d given), changed to 1.", i); errno = 0; logerror((char*) errMsg); i = 1; } else if(i > 10000) { snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar), "DynaFileCacheSize maximum is 10,000 (%d given), changed to 10,000.", i); errno = 0; logerror((char*) errMsg); i = 10000; } iDynaFileCacheSize = i; dprintf("DynaFileCacheSize changed to %d.\n", i); *pp = p; } /* Parse and interpret an on/off inside a config file line. This is most * often used for boolean options, but of course it may also be used * for other things. The passed-in pointer is updated to point to * the first unparsed character on exit. Function emits error messages * if the value is neither on or off. It returns 0 if the option is off, * 1 if it is on and another value if there was an error. * rgerhards, 2007-07-15 */ static int doParseOnOffOption(uchar **pp) { char *pOptStart; uchar szOpt[32]; int iRet = -1; assert(pp != NULL); assert(*pp != NULL); pOptStart = *pp; skipWhiteSpace(pp); /* skip over any whitespace */ if(getSubString(pp, (char*) szOpt, sizeof(szOpt) / sizeof(uchar), ' ') != 0) { logerror("Invalid $-configline - could not extract on/off option"); return; } if(!strcmp(szOpt, "on")) { return 1; } else if(!strcmp(szOpt, "off")) { return 0; } else { logerrorSz("Option value must be on or off, but is '%s'", pOptStart); return -1; } } /* Parse and process an binary cofig option. pVal must be * a pointer to an integer which is to receive the option * value. * rgerhards, 2007-07-15 */ static void doBinaryOptionLine(uchar **pp, int *pVal) { int iOption; assert(pp != NULL); assert(*pp != NULL); assert(pVal != NULL); if((iOption = doParseOnOffOption(pp)) == -1) return; /* nothing left to do */ *pVal = iOption; skipWhiteSpace(pp); /* skip over any whitespace */ } /* Parse and interpet a $FileCreateMode and $umask line. This function * pulls the creation mode and, if successful, stores it * into the global variable so that the rest of rsyslogd * opens files with that mode. Any previous value will be * overwritten. * HINT: if we store the creation mode in selector_t, we * can even specify multiple modes simply be virtue of * being placed in the right section of rsyslog.conf * rgerhards, 2007-07-4 (happy independence day to my US friends!) * Parameter **pp has a pointer to the current config line. * On exit, it will be updated to the processed position. */ static void doFileCreateModeUmaskLine(uchar **pp, enum eDirective eDir) { uchar *p; uchar errMsg[128]; /* for dynamic error messages */ int iMode; assert(pp != NULL); assert(*pp != NULL); skipWhiteSpace(pp); /* skip over any whitespace */ p = *pp; /* for now, we parse and accept only octal numbers * Sequence of tests is important, we are using boolean shortcuts * to avoid addressing invalid memory! */ if(!( (*p == '0') && (*(p+1) && *(p+1) >= '0' && *(p+1) <= '7') && (*(p+2) && *(p+2) >= '0' && *(p+2) <= '7') && (*(p+3) && *(p+3) >= '0' && *(p+3) <= '7') ) ) { snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar), "%s value must be octal (e.g 0644), invalid value '%s'.", eDir == DIR_UMASK ? "umask" : "filecreatemode", p); errno = 0; logerror((char*) errMsg); return; } /* we reach this code only if the octal number is ok - so we can now * compute the value. */ iMode = (*(p+1)-'0') * 64 + (*(p+2)-'0') * 8 + (*(p+3)-'0'); switch(eDir) { case DIR_FILECREATEMODE: fCreateMode = iMode; dprintf("FileCreateMode set to 0%o.\n", iMode); break; case DIR_UMASK: umask(iMode); dprintf("umask set to 0%3.3o.\n", iMode); break; default:/* we do this to avoid compiler warning - not all * enum values call this function, so an incomplete list * is quite ok (but then we should not run into this code, * so at least we log a debug warning). */ dprintf("INTERNAL ERROR: doFileCreateModeUmaskLine() called with invalid eDir %d.\n", eDir); break; } p += 4; /* eat the octal number */ *pp = p; } /* parse and interpret a $-config line that starts with * a name (this is common code). It is parsed to the name * and then the proper sub-function is called to handle * the actual directive. * rgerhards 2004-11-17 * rgerhards 2005-06-21: previously only for templates, now * generalized. */ static void doNameLine(uchar **pp, enum eDirective eDir) { uchar *p; char szName[128]; assert(pp != NULL); p = *pp; assert(p != NULL); if(getSubString(&p, szName, sizeof(szName) / sizeof(char), ',') != 0) { char errMsg[128]; snprintf(errMsg, sizeof(errMsg)/sizeof(char), "Invalid $%s line: could not extract name - line ignored", directive_name_list[eDir]); logerror(errMsg); return; } if(*p == ',') ++p; /* comma was eaten */ /* we got the name - now we pass name & the rest of the string * to the subfunction. It makes no sense to do further * parsing here, as this is in close interaction with the * respective subsystem. rgerhards 2004-11-17 */ switch(eDir) { case DIR_TEMPLATE: tplAddLine(szName, &p); break; case DIR_OUTCHANNEL: ochAddLine(szName, &p); break; case DIR_ALLOWEDSENDER: addAllowedSenderLine(szName, &p); break; default:/* we do this to avoid compiler warning - not all * enum values call this function, so an incomplete list * is quite ok (but then we should not run into this code, * so at least we log a debug warning). */ dprintf("INTERNAL ERROR: doNameLine() called with invalid eDir %d.\n", eDir); break; } *pp = p; return; } /* Parse and interpret a system-directive in the config line * A system directive is one that starts with a "$" sign. It offers * extended configuration parameters. * 2004-11-17 rgerhards */ void cfsysline(uchar *p) { uchar szCmd[64]; uchar errMsg[128]; /* for dynamic error messages */ assert(p != NULL); errno = 0; dprintf("cfsysline --> %s", p); if(getSubString(&p, (char*) szCmd, sizeof(szCmd) / sizeof(uchar), ' ') != 0) { logerror("Invalid $-configline - could not extract command - line ignored\n"); return; } /* check the command and carry out processing */ if(!strcasecmp((char*) szCmd, "template")) { doNameLine(&p, DIR_TEMPLATE); } else if(!strcasecmp((char*) szCmd, "outchannel")) { doNameLine(&p, DIR_OUTCHANNEL); } else if(!strcasecmp((char*) szCmd, "allowedsender")) { doNameLine(&p, DIR_ALLOWEDSENDER); } else if(!strcasecmp((char*) szCmd, "filecreatemode")) { doFileCreateModeUmaskLine(&p, DIR_FILECREATEMODE); } else if(!strcasecmp((char*) szCmd, "umask")) { doFileCreateModeUmaskLine(&p, DIR_UMASK); } else if(!strcasecmp((char*) szCmd, "dynafilecachesize")) { doDynaFileCacheSizeLine(&p, DIR_DYNAFILECACHESIZE); } else if(!strcasecmp((char*) szCmd, "repeatedlinereduction")) { doBinaryOptionLine(&p, &bReduceRepeatMsgs); } else if(!strcasecmp((char*) szCmd, "escapecontrolcharactersonreceive")) { doBinaryOptionLine(&p, &bEscapeCCOnRcv); } else { /* invalid command! */ char err[100]; snprintf(err, sizeof(err)/sizeof(char), "Invalid command in $-configline: '%s' - line ignored\n", szCmd); logerror(err); return; } /* now check if we have some extra characters left on the line - that * should not be the case. Whitespace is OK, but everything else should * trigger a warning (that may be an indication of undesired behaviour). * An exception, of course, are comments (starting with '#'). * rgerhards, 2007-07-04 */ skipWhiteSpace(&p); if(*p && *p != '#') { /* we have a non-whitespace, so let's complain */ snprintf((char*) errMsg, sizeof(errMsg)/sizeof(uchar), "error: extra characters in config line ignored: '%s'", p); errno = 0; logerror((char*) errMsg); } } /* INIT -- Initialize syslogd from configuration table * init() is called at initial startup AND each time syslogd is HUPed */ static void init() { register int i; register FILE *cf; register selector_t *f; register selector_t *nextp; register char *p; register unsigned int Forwarding = 0; #ifdef CONT_LINE char cbuf[BUFSIZ]; char *cline; #else char cline[BUFSIZ]; #endif char bufStartUpMsg[512]; struct servent *sp; /* initialize some static variables */ pDfltHostnameCmp = NULL; pDfltProgNameCmp = NULL; eDfltHostnameCmpMode = HN_NO_COMP; nextp = NULL; /* I was told by an IPv6 expert that calling getservbyname() seems to be * still valid, at least for the use case we have. So I re-enabled that * code. rgerhards, 2007-07-02 */ if(!strcmp(LogPort, "0")) { /* we shall use the default syslog/udp port, so let's * look it up. */ sp = getservbyname("syslog", "udp"); if (sp == NULL) { errno = 0; logerror("Could not find syslog/udp port in /etc/services. " "Now using IANA-assigned default of 514."); LogPort = "514"; } else { /* we can dynamically allocate memory here and do NOT need * to care about freeing it because even though init() is * called on each restart, the LogPort can never again be * "0". So we will only once run into this part of the code * here. rgerhards, 2007-07-02 * We save ourselfs the hassle of dynamic memory management * for the very same reason. */ static char defPort[8]; snprintf(defPort, sizeof(defPort) * sizeof(char), "%d", ntohs(sp->s_port)); LogPort = defPort; } } /* Close all open log files and free log descriptor array. */ dprintf("Called init.\n"); Initialized = 0; if(Files != NULL) { selector_t *fPrev; dprintf("Initializing log structures.\n"); f = Files; while (f != NULL) { /* flush any pending output */ if (f->f_prevcount) { fprintlog(f); } /* free iovec if it was allocated */ if(f->f_iov != NULL) { if(f->f_bMustBeFreed != NULL) { iovDeleteFreeableStrings(f); free(f->f_bMustBeFreed); } free(f->f_iov); } switch (f->f_type) { case F_FILE: case F_PIPE: case F_TTY: case F_CONSOLE: if(f->f_un.f_file.bDynamicName) { dynaFileFreeCache(f); } else close(f->f_file); break; case F_FORW: freeaddrinfo(f->f_un.f_forw.f_addr); if(f->f_un.f_forw.port != NULL) free(f->f_un.f_forw.port); break; # ifdef WITH_DB case F_MYSQL: closeMySQL(f); break; # endif } # ifdef USE_PTHREADS /* delete any mutex objects, if present */ if( ( (f->f_type == F_FORW_SUSP) || (f->f_type == F_FORW) || (f->f_type == F_FORW_UNKN) ) && (f->f_un.f_forw.protocol == FORW_TCP)) { pthread_mutex_destroy(&f->f_un.f_forw.mtxTCPSend); } # endif /* done with this entry, we now need to delete itself */ fPrev = f; f = f->f_next; free(fPrev); } /* Reflect the deletion of the Files linked list. */ Files = NULL; } f = NULL; nextp = NULL; /* re-setting values to command line defaults (where applicable) */ bEscapeCCOnRcv = 1; /* default is to escape control characters */ bReduceRepeatMsgs = (logEveryMsg == 1) ? 0 : 1; /* open the configuration file */ if ((cf = fopen(ConfFile, "r")) == NULL) { /* rgerhards: this code is executed to set defaults when the * config file could not be opened. We might think about * abandoning the run in this case - but this, too, is not * very clever... So we stick with what we have. */ dprintf("cannot open %s (%s).\n", ConfFile, strerror(errno)); nextp = (selector_t *)calloc(1, sizeof(selector_t)); Files = nextp; /* set the root! */ cfline("*.ERR\t" _PATH_CONSOLE, nextp); nextp->f_next = (selector_t *)calloc(1, sizeof(selector_t)); cfline("*.PANIC\t*", nextp->f_next); nextp->f_next = (selector_t *)calloc(1, sizeof(selector_t)); snprintf(cbuf,sizeof(cbuf), "*.*\t%s", ttyname(0)); cfline(cbuf, nextp->f_next); Initialized = 1; } else { /* we should consider moving this into a separate function, its lengthy... */ /* * Foreach line in the conf table, open that file. */ #if CONT_LINE cline = cbuf; while (fgets(cline, sizeof(cbuf) - (cline - cbuf), cf) != NULL) { #else while (fgets(cline, sizeof(cline), cf) != NULL) { #endif /* * check for end-of-section, comments, strip off trailing * spaces and newline character. */ for (p = cline; isspace((int) *p); ++p) /*SKIP SPACES*/; if (*p == '\0' || *p == '#') continue; if(*p == '$') { cfsysline((uchar*) ++p); continue; } #if CONT_LINE strcpy(cline, p); #endif for (p = strchr(cline, '\0'); isspace((int) *--p);); #if CONT_LINE if (*p == '\\') { if ((p - cbuf) > BUFSIZ - 30) { /* Oops the buffer is full - what now? */ cline = cbuf; } else { *p = 0; cline = p; continue; } } else cline = cbuf; #endif *++p = '\0'; /* allocate next entry and add it */ f = (selector_t *)calloc(1, sizeof(selector_t)); /* TODO: check for NULL pointer (this is a general issue in this code...)! */ if(nextp == NULL) { Files = f; } else { nextp->f_next = f; } nextp = f; /* be careful: the default below must be set BEFORE calling cfline()! */ f->f_un.f_file.f_sizeLimit = 0; /* default value, use outchannels to configure! */ #if CONT_LINE cfline(cbuf, f); #else cfline(cline, f); #endif if (f->f_type == F_FORW || f->f_type == F_FORW_SUSP || f->f_type == F_FORW_UNKN) { Forwarding++; } } /* close the configuration file */ (void) fclose(cf); } /* we are now done with reading the configuraton. This is the right time to * free some objects that were just needed for loading it. rgerhards 2005-10-19 */ if(pDfltHostnameCmp != NULL) { rsCStrDestruct(pDfltHostnameCmp); pDfltHostnameCmp = NULL; } if(pDfltProgNameCmp != NULL) { rsCStrDestruct(pDfltProgNameCmp); pDfltProgNameCmp = NULL; } #ifdef SYSLOG_UNIXAF for (i = startIndexUxLocalSockets ; i < nfunix ; i++) { if (funix[i] != -1) /* Don't close the socket, preserve it instead close(funix[i]); */ continue; if ((funix[i] = create_unix_socket(funixn[i])) != -1) dprintf("Opened UNIX socket `%s' (fd %d).\n", funixn[i], funix[i]); } #endif #ifdef SYSLOG_INET /* I have moved initializing UDP sockets before the TCP sockets. This ensures * they are as soon ready for reception as possible. Of course, it is only a * very small window of exposure, but it doesn't hurt to limit the message * loss risk to as low as possible - especially if it costs nothing... * rgerhards, 2007-06-28 */ if(Forwarding || AcceptRemote) { if (finet == NULL) { if((finet = create_udp_socket()) != NULL) dprintf("Opened %d syslog UDP port(s).\n", *finet); } } else { /* this case can happen during HUP processing. */ closeUDPListenSockets(); } if (bEnableTCP) { if(sockTCPLstn == NULL) { /* even when doing a re-init, we do not shut down and * re-open the TCP socket. That would break existing TCP * session, which we do not desire. Should at some time arise * need to do that, I recommend controlling that via a * user-selectable option. rgerhards, 2007-06-21 */ if((sockTCPLstn = create_tcp_socket()) != NULL) { dprintf("Opened %d syslog TCP port(s).\n", *sockTCPLstn); } } } #endif Initialized = 1; if(Debug) { printf("Active selectors:\n"); for (f = Files; f != NULL ; f = f->f_next) { if (f->f_type != F_UNUSED) { if(f->pCSProgNameComp != NULL) printf("tag: '%s'\n", rsCStrGetSzStr(f->pCSProgNameComp)); if(f->eHostnameCmpMode != HN_NO_COMP) printf("hostname: %s '%s'\n", f->eHostnameCmpMode == HN_COMP_MATCH ? "only" : "allbut", rsCStrGetSzStr(f->pCSHostnameComp)); if(f->f_filter_type == FILTER_PRI) { for (i = 0; i <= LOG_NFACILITIES; i++) if (f->f_filterData.f_pmask[i] == TABLE_NOPRI) printf(" X "); else printf("%2X ", f->f_filterData.f_pmask[i]); } else { printf("PROPERTY-BASED Filter:\n"); printf("\tProperty.: '%s'\n", rsCStrGetSzStr(f->f_filterData.prop.pCSPropName)); printf("\tOperation: "); if(f->f_filterData.prop.isNegated) printf("NOT "); printf("'%s'\n", getFIOPName(f->f_filterData.prop.operation)); printf("\tValue....: '%s'\n", rsCStrGetSzStr(f->f_filterData.prop.pCSCompValue)); printf("\tAction...: "); } printf("%s: ", TypeNames[f->f_type]); switch (f->f_type) { case F_FILE: case F_PIPE: case F_TTY: case F_CONSOLE: if(f->f_un.f_file.bDynamicName) { printf("[dynamic, template='%s', cache size=%d]", f->f_un.f_file.f_fname, f->f_un.f_file.iDynaFileCacheSize); } else { /* regular file */ printf("%s", f->f_un.f_file.f_fname); if (f->f_file == -1) printf(" (unused)"); } break; case F_SHELL: printf("%s", f->f_un.f_file.f_fname); break; case F_FORW: case F_FORW_SUSP: case F_FORW_UNKN: printf("%s", f->f_un.f_forw.f_hname); break; case F_USERS: for (i = 0; i < MAXUNAMES && *f->f_un.f_uname[i]; i++) printf("%s, ", f->f_un.f_uname[i]); break; } if(f->f_ReduceRepeated) printf(" [RepeatedLineReduction]"); printf("\n"); } } printf("\n"); tplPrintList(); ochPrintList(); #ifdef SYSLOG_INET /* now the allowedSender lists: */ PrintAllowedSenders(1); /* UDP */ PrintAllowedSenders(2); /* TCP */ #endif /* #ifdef SYSLOG_INET */ } /* we now generate the startup message. It now includes everything to * identify this instance. * rgerhards, 2005-08-17 */ snprintf(bufStartUpMsg, sizeof(bufStartUpMsg)/sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ "\" x-pid=\"%d\"][x-configInfo udpReception=\"%s\" " \ "udpPort=\"%s\" tcpReception=\"%s\" tcpPort=\"%s\"]" \ " restart", (int) myPid, #ifdef SYSLOG_INET AcceptRemote ? "Yes" : "No", LogPort, bEnableTCP ? "Yes" : "No", TCPLstnPort #else "No", "0", "No", "0" #endif /* #ifdef SYSLOG_INET */ ); logmsgInternal(LOG_SYSLOG|LOG_INFO, bufStartUpMsg, LocalHostName, ADDDATE); (void) signal(SIGHUP, sighup_handler); dprintf(" restarted.\n"); } /* helper to cfline() and its helpers. Assign the right template * to a filed entry and allocates memory for its iovec. * rgerhards 2004-11-19 */ static void cflineSetTemplateAndIOV(selector_t *f, char *pTemplateName) { char errMsg[512]; assert(f != NULL); assert(pTemplateName != NULL); /* Ok, we got everything, so it now is time to look up the * template (Hint: templates MUST be defined before they are * used!) and initialize the pointer to it PLUS the iov * pointer. We do the later because the template tells us * how many elements iov must have - and this can never change. */ if((f->f_pTpl = tplFind(pTemplateName, strlen(pTemplateName))) == NULL) { snprintf(errMsg, sizeof(errMsg) / sizeof(char), " Could not find template '%s' - selector line disabled\n", pTemplateName); errno = 0; logerror(errMsg); f->f_type = F_UNUSED; } else { if((f->f_iov = calloc(tplGetEntryCount(f->f_pTpl), sizeof(struct iovec))) == NULL) { errno = 0; logerror("Could not allocate iovec memory - 1 selector line disabled\n"); f->f_type = F_UNUSED; } if((f->f_bMustBeFreed = calloc(tplGetEntryCount(f->f_pTpl), sizeof(unsigned short))) == NULL) { errno = 0; logerror("Could not allocate bMustBeFreed memory - 1 selector line disabled\n"); f->f_type = F_UNUSED; } } } /* Helper to cfline() and its helpers. Parses a template name * from an "action" line. Must be called with the Line pointer * pointing to the first character after the semicolon. * Everything is stored in the filed struct. If there is no * template name (it is empty), than it is ensured that the * returned string is "\0". So you can count on the first character * to be \0 in this case. * rgerhards 2004-11-19 */ static void cflineParseTemplateName(selector_t *f, uchar** pp, register char* pTemplateName, int iLenTemplate) { register uchar *p; int i; assert(f != NULL); assert(pp != NULL); assert(*pp != NULL); p =*pp; /* Just as a general precaution, we skip whitespace. */ while(*p && isspace((int) *p)) ++p; i = 1; /* we start at 1 so that we reserve space for the '\0'! */ while(*p && i < iLenTemplate) { *pTemplateName++ = *p++; ++i; } *pTemplateName = '\0'; *pp = p; } /* Helper to cfline(). Parses a file name up until the first * comma and then looks for the template specifier. Tries * to find that template. Everything is stored in the * filed struct. * rgerhards 2004-11-18 */ static void cflineParseFileName(selector_t *f, uchar* p) { register char *pName; int i; char szTemplateName[128]; /* should be more than sufficient */ if(*p == '|') { f->f_type = F_PIPE; ++p; } else { f->f_type = F_FILE; } pName = f->f_un.f_file.f_fname; i = 1; /* we start at 1 so that we reseve space for the '\0'! */ while(*p && *p != ';' && i < MAXFNAME) { *pName++ = *p++; ++i; } *pName = '\0'; /* got the file name - now let's look for the template to use * Just as a general precaution, we skip whitespace. */ while(*p && isspace((int) *p)) ++p; if(*p == ';') ++p; /* eat it */ cflineParseTemplateName(f, &p, szTemplateName, sizeof(szTemplateName) / sizeof(char)); if(szTemplateName[0] == '\0') /* no template? */ strcpy(szTemplateName, " TradFmt"); /* use default! */ cflineSetTemplateAndIOV(f, szTemplateName); dprintf("filename: '%s', template: '%s'\n", f->f_un.f_file.f_fname, szTemplateName); } /* Helper to cfline(). Parses a output channel name up until the first * comma and then looks for the template specifier. Tries * to find that template. Maps the output channel to the * proper filed structure settings. Everything is stored in the * filed struct. Over time, the dependency on filed might be * removed. * rgerhards 2005-06-21 */ static void cflineParseOutchannel(selector_t *f, uchar* p) { int i; struct outchannel *pOch; char szBuf[128]; /* should be more than sufficient */ /* this must always be a file, because we can not set a size limit * on a pipe... * rgerhards 2005-06-21: later, this will be a separate type, but let's * emulate things for the time being. When everything runs, we can * extend it... */ f->f_type = F_FILE; ++p; /* skip '$' */ i = 0; /* get outchannel name */ while(*p && *p != ';' && *p != ' ' && i < sizeof(szBuf) / sizeof(char)) { szBuf[i++] = *p++; } szBuf[i] = '\0'; /* got the name, now look up the channel... */ pOch = ochFind(szBuf, i); if(pOch == NULL) { char errMsg[128]; errno = 0; snprintf(errMsg, sizeof(errMsg)/sizeof(char), "outchannel '%s' not found - ignoring action line", szBuf); logerror(errMsg); f->f_type = F_UNUSED; return; } /* check if there is a file name in the outchannel... */ if(pOch->pszFileTemplate == NULL) { char errMsg[128]; errno = 0; snprintf(errMsg, sizeof(errMsg)/sizeof(char), "outchannel '%s' has no file name template - ignoring action line", szBuf); logerror(errMsg); f->f_type = F_UNUSED; return; } /* OK, we finally got a correct template. So let's use it... */ strncpy(f->f_un.f_file.f_fname, pOch->pszFileTemplate, MAXFNAME); f->f_un.f_file.f_sizeLimit = pOch->uSizeLimit; /* WARNING: It is dangerous "just" to pass the pointer. As we * never rebuild the output channel description, this is acceptable here. */ f->f_un.f_file.f_sizeLimitCmd = pOch->cmdOnSizeLimit; /* back to the input string - now let's look for the template to use * Just as a general precaution, we skip whitespace. */ while(*p && isspace((int) *p)) ++p; if(*p == ';') ++p; /* eat it */ cflineParseTemplateName(f, &p, szBuf, sizeof(szBuf) / sizeof(char)); if(szBuf[0] == '\0') /* no template? */ strcpy(szBuf, " TradFmt"); /* use default! */ cflineSetTemplateAndIOV(f, szBuf); dprintf("[outchannel]filename: '%s', template: '%s', size: %lu\n", f->f_un.f_file.f_fname, szBuf, f->f_un.f_file.f_sizeLimit); } /* * Helper to cfline(). This function takes the filter part of a traditional, PRI * based line and decodes the PRIs given in the selector line. It processed the * line up to the beginning of the action part. A pointer to that beginnig is * passed back to the caller. * rgerhards 2005-09-15 */ static rsRetVal cflineProcessTradPRIFilter(uchar **pline, register selector_t *f) { uchar *p; register uchar *q; register int i, i2; uchar *bp; int pri; int singlpri = 0; int ignorepri = 0; uchar buf[MAXLINE]; uchar xbuf[200]; assert(pline != NULL); assert(*pline != NULL); assert(f != NULL); dprintf(" - traditional PRI filter\n"); errno = 0; /* keep strerror() stuff out of logerror messages */ f->f_filter_type = FILTER_PRI; /* Note: file structure is pre-initialized to zero because it was * created with calloc()! */ for (i = 0; i <= LOG_NFACILITIES; i++) { f->f_filterData.f_pmask[i] = TABLE_NOPRI; f->f_flags = 0; } /* scan through the list of selectors */ for (p = *pline; *p && *p != '\t' && *p != ' ';) { /* find the end of this facility name list */ for (q = p; *q && *q != '\t' && *q++ != '.'; ) continue; /* collect priority name */ for (bp = buf; *q && !strchr("\t ,;", *q); ) *bp++ = *q++; *bp = '\0'; /* skip cruft */ while (strchr(",;", *q)) q++; /* decode priority name */ if ( *buf == '!' ) { ignorepri = 1; for (bp=buf; *(bp+1); bp++) *bp=*(bp+1); *bp='\0'; } else { ignorepri = 0; } if ( *buf == '=' ) { singlpri = 1; pri = decode(&buf[1], PriNames); } else { singlpri = 0; pri = decode(buf, PriNames); } if (pri < 0) { snprintf((char*) xbuf, sizeof(xbuf), "unknown priority name \"%s\"", buf); logerror((char*) xbuf); return RS_RET_ERR; } /* scan facilities */ while (*p && !strchr("\t .;", *p)) { for (bp = buf; *p && !strchr("\t ,;.", *p); ) *bp++ = *p++; *bp = '\0'; if (*buf == '*') { for (i = 0; i <= LOG_NFACILITIES; i++) { if ( pri == INTERNAL_NOPRI ) { if ( ignorepri ) f->f_filterData.f_pmask[i] = TABLE_ALLPRI; else f->f_filterData.f_pmask[i] = TABLE_NOPRI; } else if ( singlpri ) { if ( ignorepri ) f->f_filterData.f_pmask[i] &= ~(1<f_filterData.f_pmask[i] |= (1<f_filterData.f_pmask[i] = TABLE_NOPRI; else f->f_filterData.f_pmask[i] = TABLE_ALLPRI; } else { if ( ignorepri ) for (i2= 0; i2 <= pri; ++i2) f->f_filterData.f_pmask[i] &= ~(1<f_filterData.f_pmask[i] |= (1<f_filterData.f_pmask[i >> 3] = TABLE_ALLPRI; else f->f_filterData.f_pmask[i >> 3] = TABLE_NOPRI; } else if ( singlpri ) { if ( ignorepri ) f->f_filterData.f_pmask[i >> 3] &= ~(1<f_filterData.f_pmask[i >> 3] |= (1<f_filterData.f_pmask[i >> 3] = TABLE_NOPRI; else f->f_filterData.f_pmask[i >> 3] = TABLE_ALLPRI; } else { if ( ignorepri ) for (i2= 0; i2 <= pri; ++i2) f->f_filterData.f_pmask[i >> 3] &= ~(1<f_filterData.f_pmask[i >> 3] |= (1<f_filter_type = FILTER_PROP; /* create parser object starting with line string without leading colon */ if((iRet = rsParsConstructFromSz(&pPars, (*pline)+1)) != RS_RET_OK) { logerrorInt("Error %d constructing parser object - ignoring selector", iRet); return(iRet); } /* read property */ iRet = parsDelimCStr(pPars, &f->f_filterData.prop.pCSPropName, ',', 1, 1); if(iRet != RS_RET_OK) { logerrorInt("error %d parsing filter property - ignoring selector", iRet); rsParsDestruct(pPars); return(iRet); } /* read operation */ iRet = parsDelimCStr(pPars, &pCSCompOp, ',', 1, 1); if(iRet != RS_RET_OK) { logerrorInt("error %d compare operation property - ignoring selector", iRet); rsParsDestruct(pPars); return(iRet); } /* we now first check if the condition is to be negated. To do so, we first * must make sure we have at least one char in the param and then check the * first one. * rgerhards, 2005-09-26 */ if(rsCStrLen(pCSCompOp) > 0) { if(*rsCStrGetBufBeg(pCSCompOp) == '!') { f->f_filterData.prop.isNegated = 1; iOffset = 1; /* ignore '!' */ } else { f->f_filterData.prop.isNegated = 0; iOffset = 0; } } else { f->f_filterData.prop.isNegated = 0; iOffset = 0; } if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (uchar*) "contains", 8)) { f->f_filterData.prop.operation = FIOP_CONTAINS; } else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (uchar*) "isequal", 7)) { f->f_filterData.prop.operation = FIOP_ISEQUAL; } else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (uchar*) "startswith", 10)) { f->f_filterData.prop.operation = FIOP_STARTSWITH; } else { logerrorSz("error: invalid compare operation '%s' - ignoring selector", (char*) rsCStrGetSzStr(pCSCompOp)); } RSFREEOBJ(pCSCompOp); /* no longer needed */ /* read compare value */ iRet = parsQuotedCStr(pPars, &f->f_filterData.prop.pCSCompValue); if(iRet != RS_RET_OK) { logerrorInt("error %d compare value property - ignoring selector", iRet); rsParsDestruct(pPars); return(iRet); } /* skip to action part */ if((iRet = parsSkipWhitespace(pPars)) != RS_RET_OK) { logerrorInt("error %d skipping to action part - ignoring selector", iRet); rsParsDestruct(pPars); return(iRet); } /* cleanup */ *pline = *pline + rsParsGetParsePointer(pPars) + 1; /* we are adding one for the skipped initial ":" */ return rsParsDestruct(pPars); } /* * Helper to cfline(). This function interprets a BSD host selector line * from the config file ("+/-hostname"). It stores it for further reference. * rgerhards 2005-10-19 */ static rsRetVal cflineProcessHostSelector(uchar **pline, register selector_t *f) { rsRetVal iRet; assert(pline != NULL); assert(*pline != NULL); assert(**pline == '-' || **pline == '+'); assert(f != NULL); dprintf(" - host selector line\n"); /* check include/exclude setting */ if(**pline == '+') { eDfltHostnameCmpMode = HN_COMP_MATCH; } else { /* we do not check for '-', it must be, else we wouldn't be here */ eDfltHostnameCmpMode = HN_COMP_NOMATCH; } (*pline)++; /* eat + or - */ /* the below is somewhat of a quick hack, but it is efficient (this is * why it is in here. "+*" resets the tag selector with BSD syslog. We mimic * this, too. As it is easy to check that condition, we do not fire up a * parser process, just make sure we do not address beyond our space. * Order of conditions in the if-statement is vital! rgerhards 2005-10-18 */ if(**pline != '\0' && **pline == '*' && *(*pline+1) == '\0') { dprintf("resetting BSD-like hostname filter\n"); eDfltHostnameCmpMode = HN_NO_COMP; if(pDfltHostnameCmp != NULL) { if((iRet = rsCStrSetSzStr(pDfltHostnameCmp, NULL)) != RS_RET_OK) return(iRet); pDfltHostnameCmp = NULL; } } else { dprintf("setting BSD-like hostname filter to '%s'\n", *pline); if(pDfltHostnameCmp == NULL) { /* create string for parser */ if((iRet = rsCStrConstructFromszStr(&pDfltHostnameCmp, *pline)) != RS_RET_OK) return(iRet); } else { /* string objects exists, just update... */ if((iRet = rsCStrSetSzStr(pDfltHostnameCmp, *pline)) != RS_RET_OK) return(iRet); } } return RS_RET_OK; } /* * Helper to cfline(). This function interprets a BSD tag selector line * from the config file ("!tagname"). It stores it for further reference. * rgerhards 2005-10-18 */ static rsRetVal cflineProcessTagSelector(uchar **pline, register selector_t *f) { rsRetVal iRet; assert(pline != NULL); assert(*pline != NULL); assert(**pline == '!'); assert(f != NULL); dprintf(" - programname selector line\n"); (*pline)++; /* eat '!' */ /* the below is somewhat of a quick hack, but it is efficient (this is * why it is in here. "!*" resets the tag selector with BSD syslog. We mimic * this, too. As it is easy to check that condition, we do not fire up a * parser process, just make sure we do not address beyond our space. * Order of conditions in the if-statement is vital! rgerhards 2005-10-18 */ if(**pline != '\0' && **pline == '*' && *(*pline+1) == '\0') { dprintf("resetting programname filter\n"); if(pDfltProgNameCmp != NULL) { if((iRet = rsCStrSetSzStr(pDfltProgNameCmp, NULL)) != RS_RET_OK) return(iRet); pDfltProgNameCmp = NULL; } } else { dprintf("setting programname filter to '%s'\n", *pline); if(pDfltProgNameCmp == NULL) { /* create string for parser */ if((iRet = rsCStrConstructFromszStr(&pDfltProgNameCmp, *pline)) != RS_RET_OK) return(iRet); } else { /* string objects exists, just update... */ if((iRet = rsCStrSetSzStr(pDfltProgNameCmp, *pline)) != RS_RET_OK) return(iRet); } } return RS_RET_OK; } /* * Crack a configuration file line * rgerhards 2004-11-17: well, I somewhat changed this function. It now does NOT * handle config lines in general, but only lines that reflect actual filter * pairs (the original syslog message line format). Extended lines (those starting * with "$" have been filtered out by the caller and are passed to another function (cfsysline()). * Please note, however, that I needed to make changes in the line syntax to support * assignment of format definitions to a file. So it is not (yet) 100% transparent. * Eventually, we can overcome this limitation by prefixing the actual action indicator * (e.g. "/file..") by something (e.g. "$/file..") - but for now, we just modify it... */ static rsRetVal cfline(char *line, register selector_t *f) { uchar *p; register uchar *q; register int i; int syncfile; rsRetVal iRet; #ifdef SYSLOG_INET struct addrinfo hints, *res; int error; int bErr; #endif char szTemplateName[128]; #ifdef WITH_DB int iMySQLPropErr = 0; #endif dprintf("cfline(%s)", line); errno = 0; /* keep strerror() stuff out of logerror messages */ p = (uchar*) line; /* check which filter we need to pull... */ switch(*p) { case ':': iRet = cflineProcessPropFilter(&p, f); break; case '!': iRet = cflineProcessTagSelector(&p, f); return iRet; /* in this case, we are done */ case '+': case '-': iRet = cflineProcessHostSelector(&p, f); return iRet; /* in this case, we are done */ default: iRet = cflineProcessTradPRIFilter(&p, f); break; } /* check if that went well... */ if(iRet != RS_RET_OK) { f->f_type = F_UNUSED; return iRet; } /* common properties */ f->f_ReduceRepeated = bReduceRepeatMsgs; /* we now check if there are some global (BSD-style) filter conditions * and, if so, we copy them over. rgerhards, 2005-10-18 */ if(pDfltProgNameCmp != NULL) if((iRet = rsCStrConstructFromCStr(&(f->pCSProgNameComp), pDfltProgNameCmp)) != RS_RET_OK) return(iRet); if(eDfltHostnameCmpMode != HN_NO_COMP) { f->eHostnameCmpMode = eDfltHostnameCmpMode; if((iRet = rsCStrConstructFromCStr(&(f->pCSHostnameComp), pDfltHostnameCmp)) != RS_RET_OK) return(iRet); } if (*p == '-') { syncfile = 0; p++; } else syncfile = 1; dprintf("leading char in action: %c\n", *p); switch (*p) { case '@': #ifdef SYSLOG_INET ++p; /* eat '@' */ if(*p == '@') { /* indicator for TCP! */ f->f_un.f_forw.protocol = FORW_TCP; ++p; /* eat this '@', too */ /* in this case, we also need a mutex... */ # ifdef USE_PTHREADS pthread_mutex_init(&f->f_un.f_forw.mtxTCPSend, 0); # endif } else { f->f_un.f_forw.protocol = FORW_UDP; } /* we are now after the protocol indicator. Now check if we should * use compression. We begin to use a new option format for this: * @(option,option)host:port * The first option defined is "z[0..9]" where the digit indicates * the compression level. If it is not given, 9 (best compression) is * assumed. An example action statement might be: * @@(z5,o)127.0.0.1:1400 * Which means send via TCP with medium (5) compresion (z) to the local * host on port 1400. The '0' option means that octet-couting (as in * IETF I-D syslog-transport-tls) is to be used for framing (this option * applies to TCP-based syslog only and is ignored when specified with UDP). * That is not yet implemented. * rgerhards, 2006-12-07 */ if(*p == '(') { /* at this position, it *must* be an option indicator */ do { ++p; /* eat '(' or ',' (depending on when called) */ /* check options */ if(*p == 'z') { /* compression */ # ifdef USE_NETZIP ++p; /* eat */ if(isdigit((int) *p)) { int iLevel; iLevel = *p - '0'; ++p; /* eat */ f->f_un.f_forw.compressionLevel = iLevel; } else { logerrorInt("Invalid compression level '%c' specified in " "forwardig action - NOT turning on compression.", *p); } # else logerror("Compression requested, but rsyslogd is not compiled " "with compression support - request ignored."); # endif /* #ifdef USE_NETZIP */ } else if(*p == 'o') { /* octet-couting based TCP framing? */ ++p; /* eat */ /* no further options settable */ f->f_un.f_forw.tcp_framing = TCP_FRAMING_OCTET_COUNTING; } else { /* invalid option! Just skip it... */ logerrorInt("Invalid option %c in forwarding action - ignoring.", *p); ++p; /* eat invalid option */ } /* the option processing is done. We now do a generic skip * to either the next option or the end of the option * block. */ while(*p && *p != ')' && *p != ',') ++p; /* just skip it */ } while(*p && *p == ','); /* Attention: do.. while() */ if(*p == ')') ++p; /* eat terminator, on to next */ else /* we probably have end of string - leave it for the rest * of the code to handle it (but warn the user) */ logerror("Option block not terminated in forwarding action."); } /* extract the host first (we do a trick - we replace the ';' or ':' with a '\0') * now skip to port and then template name. rgerhards 2005-07-06 */ for(q = p ; *p && *p != ';' && *p != ':' ; ++p) /* JUST SKIP */; f->f_un.f_forw.port = NULL; if(*p == ':') { /* process port */ register int i = 0; uchar * tmp; *p = '\0'; /* trick to obtain hostname (later)! */ tmp = ++p; for( ; *p && isdigit((int) *p) ; ++p, ++i) /* SKIP AND COUNT */; f->f_un.f_forw.port = malloc(i + 1); if(f->f_un.f_forw.port == NULL) { logerror("Could not get memory to store syslog forwarding port, " "using default port, results may not be what you intend\n"); /* we leave f_forw.port set to NULL, this is then handled by * getFwdSyslogPt(). */ } else { memcpy(f->f_un.f_forw.port, tmp, i); *(f->f_un.f_forw.port + i) = '\0'; } } /* now skip to template */ bErr = 0; while(*p && *p != ';') { if(*p && *p != ';' && !isspace((int) *p)) { if(bErr == 0) { /* only 1 error msg! */ bErr = 1; errno = 0; logerror("invalid selector line (port), probably not doing " "what was intended"); } } ++p; } if(*p == ';') { *p = '\0'; /* trick to obtain hostname (later)! */ ++p; /* Now look for the template! */ cflineParseTemplateName(f, &p, szTemplateName, sizeof(szTemplateName) / sizeof(char)); } else szTemplateName[0] = '\0'; if(szTemplateName[0] == '\0') { /* we do not have a template, so let's use the default */ strcpy(szTemplateName, " StdFwdFmt"); } /* first set the f->f_type */ strcpy(f->f_un.f_forw.f_hname, (char*) q); memset(&hints, 0, sizeof(hints)); /* port must be numeric, because config file syntax requests this */ hints.ai_flags = AI_NUMERICSERV; hints.ai_family = family; hints.ai_socktype = f->f_un.f_forw.protocol == FORW_UDP ? SOCK_DGRAM : SOCK_STREAM; if( (error = getaddrinfo(f->f_un.f_forw.f_hname, getFwdSyslogPt(f), &hints, &res)) != 0) { f->f_type = F_FORW_UNKN; f->f_prevcount = INET_RETRY_MAX; f->f_time = time(NULL); } else { f->f_type = F_FORW; f->f_un.f_forw.f_addr = res; } /* then try to find the template and re-set f_type to UNUSED * if it can not be found. */ cflineSetTemplateAndIOV(f, szTemplateName); if(f->f_type == F_UNUSED) /* safety measure to make sure we have a valid * selector line before we continue down below. * rgerhards 2005-07-29 */ break; dprintf("forwarding host: '%s:%s/%s' template '%s'\n", q, getFwdSyslogPt(f), f->f_un.f_forw.protocol == FORW_UDP ? "udp" : "tcp", szTemplateName); /* * Otherwise the host might be unknown due to an * inaccessible nameserver (perhaps on the same * host). We try to get the ip number later, like * FORW_SUSP. */ #endif /* #ifdef SYSLOG_INET */ break; case '$': /* rgerhards 2005-06-21: this is a special setting for output-channel * definitions. In the long term, this setting will probably replace * anything else, but for the time being we must co-exist with the * traditional mode lines. */ cflineParseOutchannel(f, p); f->f_un.f_file.bDynamicName = 0; f->f_un.f_file.fCreateMode = fCreateMode; /* preserve current setting */ f->f_file = open(f->f_un.f_file.f_fname, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY, f->f_un.f_file.fCreateMode); break; case '?': /* This is much like a regular file handle, but we need to obtain * a template name. rgerhards, 2007-07-03 */ ++p; /* eat '?' */ cflineParseFileName(f, p); f->f_un.f_file.pTpl = tplFind((char*)f->f_un.f_file.f_fname, strlen((char*) f->f_un.f_file.f_fname)); if(f->f_un.f_file.pTpl == NULL) { logerrorSz("Template '%s' not found - dynaFile deactivated.", f->f_un.f_file.f_fname); f->f_type = F_UNUSED; /* that's it... :( */ } if(f->f_type == F_UNUSED) /* safety measure to make sure we have a valid * selector line before we continue down below. * rgerhards 2005-07-29 */ break; if(syncfile) f->f_flags |= SYNC_FILE; f->f_un.f_file.bDynamicName = 1; f->f_un.f_file.iCurrElt = -1; /* no current element */ f->f_un.f_file.fCreateMode = fCreateMode; /* freeze current setting */ f->f_un.f_file.iDynaFileCacheSize = iDynaFileCacheSize; /* freeze current setting */ /* we now allocate the cache table. We use calloc() intentionally, as we * need all pointers to be initialized to NULL pointers. */ if((f->f_un.f_file.dynCache = (dynaFileCacheEntry**) calloc(iDynaFileCacheSize, sizeof(dynaFileCacheEntry*))) == NULL) { f->f_type = F_UNUSED; dprintf("Could not allocate memory for dynaFileCache - selector disabled.\n"); } break; case '|': case '/': /* rgerhards 2004-11-17: from now, we need to have different * processing, because after the first comma, the template name * to use is specified. So we need to scan for the first coma first * and then look at the rest of the line. */ cflineParseFileName(f, p); if(f->f_type == F_UNUSED) /* safety measure to make sure we have a valid * selector line before we continue down below. * rgerhards 2005-07-29 */ break; if(syncfile) f->f_flags |= SYNC_FILE; f->f_un.f_file.bDynamicName = 0; f->f_un.f_file.fCreateMode = fCreateMode; /* preserve current setting */ if(f->f_type == F_PIPE) { f->f_file = open(f->f_un.f_file.f_fname, O_RDWR|O_NONBLOCK); } else { f->f_file = open(f->f_un.f_file.f_fname, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY, f->f_un.f_file.fCreateMode); } if ( f->f_file < 0 ){ f->f_file = -1; dprintf("Error opening log file: %s\n", f->f_un.f_file.f_fname); logerror(f->f_un.f_file.f_fname); break; } if (isatty(f->f_file)) { f->f_type = F_TTY; untty(); } if (strcmp((char*) p, ctty) == 0) f->f_type = F_CONSOLE; break; case '*': dprintf ("write-all"); f->f_type = F_WALL; if(*(p+1) == ';') { /* we have a template specifier! */ p += 2; /* eat "*;" */ cflineParseTemplateName(f, &p, szTemplateName, sizeof(szTemplateName) / sizeof(uchar)); } else /* assign default format if none given! */ szTemplateName[0] = '\0'; if(szTemplateName[0] == '\0') strcpy(szTemplateName, " WallFmt"); cflineSetTemplateAndIOV(f, szTemplateName); if(f->f_type == F_UNUSED) /* safety measure to make sure we have a valid * selector line before we continue down below. * rgerhards 2005-07-29 */ break; dprintf(" template '%s'\n", szTemplateName); break; case '~': /* rgerhards 2005-09-09: added support for discard */ dprintf ("discard\n"); f->f_type = F_DISCARD; break; case '>': /* rger 2004-10-28: added support for MySQL * >server,dbname,userid,password * rgerhards 2005-08-12: changed rsyslogd so that * if no DB is selected and > is used, an error * message is logged. */ #ifndef WITH_DB f->f_type = F_UNUSED; errno = 0; logerror("write to database action in config file, but rsyslogd compiled without " "database functionality - ignored"); #else /* WITH_DB defined! */ f->f_type = F_MYSQL; p++; /* Now we read the MySQL connection properties * and verify that the properties are valid. */ if(getSubString(&p, f->f_un.f_mysql.f_dbsrv, MAXHOSTNAMELEN+1, ',')) iMySQLPropErr++; if(*f->f_un.f_mysql.f_dbsrv == '\0') iMySQLPropErr++; if(getSubString(&p, f->f_un.f_mysql.f_dbname, _DB_MAXDBLEN+1, ',')) iMySQLPropErr++; if(*f->f_un.f_mysql.f_dbname == '\0') iMySQLPropErr++; if(getSubString(&p, f->f_un.f_mysql.f_dbuid, _DB_MAXUNAMELEN+1, ',')) iMySQLPropErr++; if(*f->f_un.f_mysql.f_dbuid == '\0') iMySQLPropErr++; if(getSubString(&p, f->f_un.f_mysql.f_dbpwd, _DB_MAXPWDLEN+1, ';')) iMySQLPropErr++; if(*p == '\n' || *p == '\0') { /* assign default format if none given! */ szTemplateName[0] = '\0'; } else { /* we have a template specifier! */ cflineParseTemplateName(f, &p, szTemplateName, sizeof(szTemplateName) / sizeof(char)); } if(szTemplateName[0] == '\0') strcpy(szTemplateName, " StdDBFmt"); cflineSetTemplateAndIOV(f, szTemplateName); /* we now check if the template was present. If not, we * can abort this run as the selector line has been * disabled. If we don't abort, we'll core dump * below. rgerhards 2005-07-29 */ if(f->f_type == F_UNUSED) break; dprintf(" template '%s'\n", szTemplateName); /* If db used, the template have to use the SQL option. This is for your own protection (prevent sql injection). */ if (f->f_pTpl->optFormatForSQL == 0) { f->f_type = F_UNUSED; logerror("DB logging disabled. You have to use" " the SQL or stdSQL option in your template!\n"); break; } /* If we dedect invalid properties, we disable logging, * because right properties are vital at this place. * Retries make no sense. */ if (iMySQLPropErr) { f->f_type = F_UNUSED; dprintf("Trouble with MySQL conncetion properties.\n" "MySQL logging disabled.\n"); } else { initMySQL(f); } #endif /* #ifdef WITH_DB */ break; case '^': /* bkalkbrenner 2005-09-20: execute shell command */ dprintf("exec\n"); ++p; cflineParseFileName(f, p); if (f->f_type == F_FILE) { f->f_type = F_SHELL; } break; default: dprintf ("users: %s\n", p); /* ASP */ f->f_type = F_USERS; for (i = 0; i < MAXUNAMES && *p && *p != ';'; i++) { for (q = p; *q && *q != ',' && *q != ';'; ) q++; (void) strncpy((char*) f->f_un.f_uname[i], (char*) p, UNAMESZ); if ((q - p) > UNAMESZ) f->f_un.f_uname[i][UNAMESZ] = '\0'; else f->f_un.f_uname[i][q - p] = '\0'; while (*q == ',' || *q == ' ') q++; p = q; } /* done, now check if we have a template name * TODO: we need to handle the case where i >= MAXUNAME! */ szTemplateName[0] = '\0'; if(*p == ';') { /* we have a template specifier! */ ++p; /* eat ";" */ cflineParseTemplateName(f, &p, szTemplateName, sizeof(szTemplateName) / sizeof(char)); } if(szTemplateName[0] == '\0') strcpy(szTemplateName, " StdUsrMsgFmt"); cflineSetTemplateAndIOV(f, szTemplateName); /* Please note that we would need to check if the template * was found. If not, f->f_type would be F_UNUSED and we * can NOT carry on processing. These checks can be seen * on all other selector line code above. However, as we * do not have anything else to do here, we do not include * this check. Should you add any further processing at * this point here, you must first add a check for this * condition! * rgerhards 2005-07-29 */ break; } return RS_RET_OK; } /* Decode a symbolic name to a numeric value */ int decode(uchar *name, struct code *codetab) { register struct code *c; register uchar *p; uchar buf[80]; assert(name != NULL); assert(codetab != NULL); dprintf ("symbolic name: %s", name); if (isdigit((int) *name)) { dprintf ("\n"); return (atoi((char*) name)); } strncpy((char*) buf, (char*) name, 79); for (p = buf; *p; p++) if (isupper((int) *p)) *p = tolower((int) *p); for (c = codetab; c->c_name; c++) if (!strcmp((char*) buf, (char*) c->c_name)) { dprintf (" ==> %d\n", c->c_val); return (c->c_val); } return (-1); } void dprintf(char *fmt, ...) { # ifdef USE_PTHREADS static int bWasNL = FALSE; # endif va_list ap; if ( !(Debug && debugging_on) ) return; # ifdef USE_PTHREADS /* The bWasNL handler does not really work. It works if no thread * switching occurs during non-NL messages. Else, things are messed * up. Anyhow, it works well enough to provide useful help during * getting this up and running. It is questionable if the extra effort * is worth fixing it, giving the limited appliability. * rgerhards, 2005-10-25 * I have decided that it is not worth fixing it - especially as it works * pretty well. * rgerhards, 2007-06-15 */ if(bWasNL) { fprintf(stdout, "%8.8d: ", (unsigned int) pthread_self()); } bWasNL = (*(fmt + strlen(fmt) - 1) == '\n') ? TRUE : FALSE; # endif va_start(ap, fmt); vfprintf(stdout, fmt, ap); va_end(ap); fflush(stdout); return; } /* * The following function is resposible for handling a SIGHUP signal. Since * we are now doing mallocs/free as part of init we had better not being * doing this during a signal handler. Instead this function simply sets * a flag variable which will tell the main loop to go through a restart. */ void sighup_handler() { restart = 1; signal(SIGHUP, sighup_handler); return; } #ifdef WITH_DB /* * The following function is responsible for initializing a * MySQL connection. * Initially added 2004-10-28 mmeckelein */ static void initMySQL(register selector_t *f) { int iCounter = 0; assert(f != NULL); if (checkDBErrorState(f)) return; f->f_un.f_mysql.f_hmysql = mysql_init(NULL); if(f->f_un.f_mysql.f_hmysql == NULL) { logerror("can not initialize MySQL handle - ignoring this action"); /* The next statement causes a redundant message, but it is the * best thing we can do in this situation. -- rgerhards, 2007-01-30 */ f->f_type = F_UNUSED; } else { /* we could get the handle, now on with work... */ do { /* Connect to database */ if (!mysql_real_connect(f->f_un.f_mysql.f_hmysql, f->f_un.f_mysql.f_dbsrv, f->f_un.f_mysql.f_dbuid, f->f_un.f_mysql.f_dbpwd, f->f_un.f_mysql.f_dbname, 0, NULL, 0)) { /* if also the second attempt failed we call the error handler */ if(iCounter) DBErrorHandler(f); } else { f->f_un.f_mysql.f_timeResumeOnError = 0; /* We have a working db connection */ dprintf("connected successfully to db\n"); } iCounter++; } while (mysql_errno(f->f_un.f_mysql.f_hmysql) && iCounter<2); } } /* * The following function is responsible for closing a * MySQL connection. * Initially added 2004-10-28 */ static void closeMySQL(register selector_t *f) { assert(f != NULL); dprintf("in closeMySQL\n"); if(f->f_un.f_mysql.f_hmysql != NULL) /* just to be on the safe side... */ mysql_close(f->f_un.f_mysql.f_hmysql); } /* * Reconnect a MySQL connection. * Initially added 2004-12-02 */ static void reInitMySQL(register selector_t *f) { assert(f != NULL); dprintf("reInitMySQL\n"); closeMySQL(f); /* close the current handle */ initMySQL(f); /* new connection */ } /* * The following function writes the current log entry * to an established MySQL session. * Initially added 2004-10-28 */ static void writeMySQL(register selector_t *f) { char *psz; int iCounter=0; assert(f != NULL); iovCreate(f); psz = iovAsString(f); if (checkDBErrorState(f)) return; /* Now we are trying to insert the data. * * If the first attampt fails we simply try a second one. If that * fails too, we discard the message and enable "delay" error handling. */ do { /* query */ if(mysql_query(f->f_un.f_mysql.f_hmysql, psz)) { /* if the second attempt fails we call the error handler */ if(iCounter) DBErrorHandler(f); } else { /* dprintf("db insert sucessfully\n"); */ } iCounter++; } while (mysql_errno(f->f_un.f_mysql.f_hmysql) && iCounter<2); } /** * DBErrorHandler * * Call this function if an db error apears. It will initiate * the "delay" handling which stopped the db logging for some * time. * * We now check if we have a valid MySQL handle. If not, we simply * report an error, but can not be specific. RGerhards, 2007-01-30 */ static void DBErrorHandler(register selector_t *f) { char errMsg[512]; assert(f != NULL); /* TODO: * NO DB connection -> Can not log to DB * -------------------- * Case 1: db server unavailable * We can check after a specified time interval if the server is up. * Also a reason can be a down DNS service. * Case 2: uid, pwd or dbname are incorrect * If this is a fault in the syslog.conf we have no chance to recover. But * if it is a problem of the DB we can make a retry after some time. Possible * are that the admin has not already set up the database table. Or he has not * created the database user yet. * Case 3: unkown error * If we get an unkowon error here, we should in any case try to recover after * a specified time interval. * * Insert failed -> Can not log to DB * -------------------- * If the insert fails it is never a good idea to give up. Only an * invalid sql sturcture (wrong template) force us to disable db * logging. * * Think about different "delay" for different errors! */ if(f->f_un.f_mysql.f_hmysql == NULL) { logerror("unknown DB error occured - called error handler with NULL MySQL handle."); } else { /* we can ask mysql for the error description... */ errno = 0; snprintf(errMsg, sizeof(errMsg)/sizeof(char), "db error (%d): %s\n", mysql_errno(f->f_un.f_mysql.f_hmysql), mysql_error(f->f_un.f_mysql.f_hmysql)); f->f_un.f_mysql.f_iLastDBErrNo = mysql_errno(f->f_un.f_mysql.f_hmysql); logerror(errMsg); } /* Enable "delay" */ f->f_un.f_mysql.f_timeResumeOnError = time(&f->f_un.f_mysql.f_timeResumeOnError) + _DB_DELAYTIMEONERROR ; } /** * checkDBErrorState * * Check if we can go on with database logging or if we should wait * a little bit longer. It also check if the DB hanlde is still valid. * If it is necessary, it takes action to reinitiate the db connection. * * \ret int Returns 0 if successful (no error) */ int checkDBErrorState(register selector_t *f) { assert(f != NULL); /* dprintf("in checkDBErrorState, timeResumeOnError: %d\n", f->f_timeResumeOnError); */ /* If timeResumeOnError == 0 no error occured, we can return with 0 (no error) */ if (f->f_un.f_mysql.f_timeResumeOnError == 0) return 0; (void) time(&now); /* Now we know an error occured. We check timeResumeOnError if we can process. If we have not reach the resume time yet, we return an error status. */ if (f->f_un.f_mysql.f_timeResumeOnError > now) { /* dprintf("Wait time is not over yet.\n"); */ return 1; } /* Ok, we can try to resume the database logging. First we have to reset the status (timeResumeOnError) and the last error no. */ /* To improve this code it would be better to check if we really need to reInit the db connection. If only the insert failed and the db conncetcion is still valid, we need no reInit. Of course, if an unkown error appeared, we should reInit. */ /* rgerhards 2004-12-08: I think it is pretty unlikely * that we can re-use a connection after the error. So I guess * the connection must be closed and re-opened in all cases * (as it is done currently). When we come back to optimize * this code, we should anyhow see if there are cases where * we could keep it open. I just doubt this won't be the case. * I added this comment (and did not remove Michaels) just so * that we all know what we are looking for. */ f->f_un.f_mysql.f_timeResumeOnError = 0; f->f_un.f_mysql.f_iLastDBErrNo = 0; reInitMySQL(f); return 0; } #endif /* #ifdef WITH_DB */ /** * getSubString * * Copy a string byte by byte until the occurrence * of a given separator. * * \param ppSrc Pointer to a pointer of the source array of characters. If a separator detected the Pointer points to the next char after the separator. Except if the end of the string is dedected ('\n'). Then it points to the terminator char. * \param pDst Pointer to the destination array of characters. Here the substing will be stored. * \param DstSize Maximum numbers of characters to store. * \param cSep Separator char. * \ret int Returns 0 if no error occured. */ int getSubString(uchar **ppSrc, char *pDst, size_t DstSize, char cSep) { uchar *pSrc = *ppSrc; int iErr = 0; /* 0 = no error, >0 = error */ while(*pSrc != cSep && *pSrc != '\n' && *pSrc != '\0' && DstSize>1) { *pDst++ = *(pSrc)++; DstSize--; } /* check if the Dst buffer was to small */ if (*pSrc != cSep && *pSrc != '\n' && *pSrc != '\0') { dprintf("in getSubString, error Src buffer > Dst buffer\n"); iErr = 1; } if (*pSrc == '\0' || *pSrc == '\n') /* this line was missing, causing ppSrc to be invalid when it * was returned in case of end-of-string. rgerhards 2005-07-29 */ *ppSrc = pSrc; else *ppSrc = pSrc+1; *pDst = '\0'; return iErr; } /* print out which socket we are listening on. This is only * a debug aid. rgerhards, 2007-07-02 */ static void debugListenInfo(int fd, char *type) { char *szFamily; int port; struct sockaddr sa; struct sockaddr_in *ipv4; struct sockaddr_in6 *ipv6; socklen_t saLen = sizeof(sa); if(getsockname(fd, &sa, &saLen) == 0) { switch(sa.sa_family) { case PF_INET: szFamily = "IPv4"; ipv4 = (struct sockaddr_in*) &sa; port = ntohs(ipv4->sin_port); break; case PF_INET6: szFamily = "IPv6"; ipv6 = (struct sockaddr_in6*) &sa; port = ntohs(ipv6->sin6_port); break; default: szFamily = "other"; port = -1; break; } dprintf("Listening on %s syslogd socket %d (%s/port %d).\n", type, fd, szFamily, port); return; } /* we can not obtain peer info. We are just providing * debug info, so this is no reason to break the program * or do any serious error reporting. */ dprintf("Listening on syslogd socket %d - could not obtain peer info.\n", fd); } static void mainloop(void) { fd_set readfds; int i; #ifdef SYSLOG_INET fd_set writefds; selector_t *f; # ifndef TESTING struct sockaddr_storage frominet; socklen_t socklen; char *from; int iTCPSess; ssize_t l; # endif /* #ifndef TESTING */ #endif /* #ifdef SYSLOG_INET */ #ifdef BSD #ifdef USE_PTHREADS struct timeval tvSelectTimeout; #endif #endif #ifndef TESTING int fd; #endif /* #ifndef TESTING */ char line[MAXLINE +1]; int maxfds; /* --------------------- Main loop begins here. ----------------------------------------- */ while(!bFinished){ int nfds; errno = 0; FD_ZERO(&readfds); maxfds = 0; #ifdef SYSLOG_UNIXAF #ifndef TESTING /* Add the Unix Domain Sockets to the list of read * descriptors. * rgerhards 2005-08-01: we must now check if there are * any local sockets to listen to at all. If the -o option * is given without -a, we do not need to listen at all.. */ /* Copy master connections */ for (i = startIndexUxLocalSockets; i < nfunix; i++) { if (funix[i] != -1) { FD_SET(funix[i], &readfds); if (funix[i]>maxfds) maxfds=funix[i]; } } #endif #endif #ifdef SYSLOG_INET #ifndef TESTING /* Add the UDP listen sockets to the list of read descriptors. */ if(finet != NULL && AcceptRemote) { for (i = 0; i < *finet; i++) { if (finet[i+1] != -1) { if(Debug) debugListenInfo(finet[i+1], "UDP"); FD_SET(finet[i+1], &readfds); if(finet[i+1]>maxfds) maxfds=finet[i+1]; } } } /* Add the TCP listen sockets to the list of read descriptors. */ if(sockTCPLstn != NULL && *sockTCPLstn) { for (i = 0; i < *sockTCPLstn; i++) { /* The if() below is theoretically not needed, but I leave it in * so that a socket may become unsuable during execution. That * feature is not yet supported by the current code base. */ if (sockTCPLstn[i+1] != -1) { if(Debug) debugListenInfo(sockTCPLstn[i+1], "TCP"); FD_SET(sockTCPLstn[i+1], &readfds); if(sockTCPLstn[i+1]>maxfds) maxfds=sockTCPLstn[i+1]; } } /* do the sessions */ iTCPSess = TCPSessGetNxtSess(-1); while(iTCPSess != -1) { int fd; fd = pTCPSessions[iTCPSess].sock; dprintf("Adding TCP Session %d\n", fd); FD_SET(fd, &readfds); if (fd>maxfds) maxfds=fd; /* now get next... */ iTCPSess = TCPSessGetNxtSess(iTCPSess); } } /* TODO: activate the code below only if we actually need to check * for outstanding writefds. */ if(1) { /* Now add the TCP output sockets to the writefds set. This implementation * is not optimal (performance-wise) and it should be replaced with something * better in the longer term. I've not yet done this, as this code is * scheduled to be replaced after the liblogging integration. * rgerhards 2005-07-20 */ FD_ZERO(&writefds); for (f = Files; f != NULL ; f = f->f_next) { if( (f->f_type == F_FORW) && (f->f_un.f_forw.protocol == FORW_TCP) && (TCPSendGetStatus(f) == TCP_SEND_CONNECTING)) { FD_SET(f->f_file, &writefds); if(f->f_file > maxfds) maxfds = f->f_file; } } } #endif #endif #ifdef TESTING FD_SET(fileno(stdin), &readfds); if (fileno(stdin) > maxfds) maxfds = fileno(stdin); dprintf("Listening on stdin. Press Ctrl-C to interrupt.\n"); #endif if ( debugging_on ) { dprintf("----------------------------------------\n"); dprintf("Calling select, active file descriptors (max %d): ", maxfds); for (nfds= 0; nfds <= maxfds; ++nfds) if ( FD_ISSET(nfds, &readfds) ) dprintf("%d ", nfds); dprintf("\n"); } #define MAIN_SELECT_TIMEVAL NULL #ifdef BSD #ifdef USE_PTHREADS /* There seems to be a problem with BSD and threads. When running on * multiple threads, a signal will not cause the select call to be * interrrupted. I am not sure if this is by design or an bug (some * information on the web let's me think it is a bug), but that really * does not matter. The issue with our code is that we will not gain * control when rsyslogd is terminated or huped. What I am doing now is * make the select call timeout after 10 seconds, so that we can check * the condition then. Obviously, this causes some sluggish behaviour and * also the loss of some (very few) cpu cycles. Both, I think, are * absolutely acceptable. * rgerhards, 2005-10-26 * TODO: I got some information: this seems to be expected signal() behaviour * we should investigate the use of sigaction() (see klogd.c for an sample). * rgerhards, 2007-06-22 */ tvSelectTimeout.tv_sec = 10; tvSelectTimeout.tv_usec = 0; # undef MAIN_SELECT_TIMEVAL # define MAIN_SELECT_TIMEVAL &tvSelectTimeout #endif #endif #ifdef SYSLOG_INET #define MAIN_SELECT_WRITEFDS (fd_set *) &writefds #else #define MAIN_SELECT_WRITEFDS NULL #endif nfds = select(maxfds+1, (fd_set *) &readfds, MAIN_SELECT_WRITEFDS, (fd_set *) NULL, MAIN_SELECT_TIMEVAL); #undef MAIN_SELECT_TIMEVAL #undef MAIN_SELECT_WRITEFDS if(bRequestDoMark) { domark(); bRequestDoMark = 0; /* We do not use continue, because domark() is carried out * only when something else happened. */ } if(restart) { dprintf("\nReceived SIGHUP, reloading rsyslogd.\n"); # ifdef USE_PTHREADS stopWorker(); # endif init(); # ifdef USE_PTHREADS startWorker(); # endif restart = 0; continue; } if (nfds == 0) { dprintf("No select activity.\n"); continue; } if (nfds < 0) { if (errno != EINTR) logerror("select"); dprintf("Select interrupted.\n"); continue; } if ( debugging_on ) { dprintf("\nSuccessful select, descriptor count = %d, " \ "Activity on: ", nfds); for (nfds= 0; nfds <= maxfds; ++nfds) if ( FD_ISSET(nfds, &readfds) ) dprintf("%d ", nfds); dprintf(("\n")); } #ifndef TESTING #ifdef SYSLOG_INET /* TODO: activate the code below only if we actually need to check * for outstanding writefds. */ if(1) { /* Now check the TCP send sockets. So far, we only see if they become * writable and then change their internal status. No real async * writing is currently done. This code will be replaced once liblogging * is used, thus we try not to focus too much on it. * * IMPORTANT: With the current code, the writefds must be checked first, * because the readfds might have messages to be forwarded, which * rely on the status setting that is done here! * rgerhards 2005-07-20 * * liblogging implementation will not happen as anticipated above. So * this code here will stay for quite a while. * rgerhards, 2006-12-07 */ for (f = Files; f != NULL ; f = f->f_next) { if( (f->f_type == F_FORW) && (f->f_un.f_forw.protocol == FORW_TCP) && (TCPSendGetStatus(f) == TCP_SEND_CONNECTING) && (FD_ISSET(f->f_file, &writefds))) { dprintf("tcp send socket %d ready for writing.\n", f->f_file); TCPSendSetStatus(f, TCP_SEND_READY); /* Send stored message (if any) */ if(f->f_un.f_forw.savedMsg != NULL) { if(TCPSend(f, f->f_un.f_forw.savedMsg, f->f_un.f_forw.savedMsgLen) != 0) { /* error! */ f->f_type = F_FORW_SUSP; errno = 0; logerror("error forwarding via tcp, suspending..."); } free(f->f_un.f_forw.savedMsg); f->f_un.f_forw.savedMsg = NULL; } } } } #endif /* #ifdef SYSLOG_INET */ #ifdef SYSLOG_UNIXAF for (i = 0; i < nfunix; i++) { if ((fd = funix[i]) != -1 && FD_ISSET(fd, &readfds)) { int iRcvd; iRcvd = recv(fd, line, MAXLINE - 1, 0); dprintf("Message from UNIX socket: #%d\n", fd); if (iRcvd > 0) { printchopped(LocalHostName, line, iRcvd, fd, funixParseHost[i]); } else if (iRcvd < 0 && errno != EINTR) { dprintf("UNIX socket error: %d = %s.\n", \ errno, strerror(errno)); logerror("recvfrom UNIX"); } } } #endif #ifdef SYSLOG_INET if (finet != NULL && AcceptRemote) { for (i = 0; i < *finet; i++) { if (FD_ISSET(finet[i+1], &readfds)) { socklen = sizeof(frominet); memset(line, '\0', sizeof(line)); l = recvfrom(finet[i+1], line, MAXLINE - 1, 0, (struct sockaddr *)&frominet, &socklen); if (l > 0) { line[l] = '\0'; from = cvthname(&frominet); dprintf("Message from inetd socket: #%d, host: %s\n", finet[i+1], from); /* Here we check if a host is permitted to send us * syslog messages. If it isn't, we do not further * process the message but log a warning (if we are * configured to do this). * rgerhards, 2005-09-26 */ if(isAllowedSender(pAllowedSenders_UDP, &frominet)) { printchopped(from, line, l, finet[i+1], 1); } else { if(option_DisallowWarning) { logerrorSz("UDP message from disallowed sender %s discarded", from); } } } else if (l < 0 && errno != EINTR && errno != EAGAIN) { dprintf("INET socket error: %d = %s.\n", errno, strerror(errno)); logerror("recvfrom inet"); /* should be harmless */ sleep(1); } } } } if(sockTCPLstn != NULL && *sockTCPLstn) { for (i = 0; i < *sockTCPLstn; i++) { if (FD_ISSET(sockTCPLstn[i+1], &readfds)) { dprintf("New connect on TCP inetd socket: #%d\n", sockTCPLstn[i+1]); TCPSessAccept(sockTCPLstn[i+1]); } } /* now check the sessions */ /* TODO: optimize the whole thing. We could stop enumerating as * soon as we have found all sockets flagged as active. */ iTCPSess = TCPSessGetNxtSess(-1); while(iTCPSess != -1) { int fd; int state; fd = pTCPSessions[iTCPSess].sock; if(FD_ISSET(fd, &readfds)) { char buf[MAXLINE]; dprintf("tcp session socket with new data: #%d\n", fd); /* Receive message */ state = recv(fd, buf, sizeof(buf), 0); if(state == 0) { /* process any incomplete frames left over */ TCPSessPrepareClose(iTCPSess); /* Session closed */ TCPSessClose(iTCPSess); } else if(state == -1) { logerrorInt("TCP session %d will be closed, error ignored\n", fd); TCPSessClose(iTCPSess); } else { /* valid data received, process it! */ if(TCPSessDataRcvd(iTCPSess, buf, state) == 0) { /* in this case, something went awfully wrong. * We are instructed to terminate the session. */ logerrorInt("Tearing down TCP Session %d - see " "previous messages for reason(s)\n", iTCPSess); TCPSessClose(iTCPSess); } } } iTCPSess = TCPSessGetNxtSess(iTCPSess); } } #endif #else if ( FD_ISSET(fileno(stdin), &readfds) ) { dprintf("Message from stdin.\n"); memset(line, '\0', sizeof(line)); line[0] = '.'; i = read(fileno(stdin), line, MAXLINE); if (i > 0) { printchopped(LocalHostName, line, i+1, fileno(stdin), 0); } else if (i < 0) { if (errno != EINTR) { logerror("stdin"); } } FD_CLR(fileno(stdin), &readfds); } #endif } } int main(int argc, char **argv) { register int i; register char *p; int num_fds; #ifdef MTRACE mtrace(); /* this is a debug aid for leak detection - either remove * or put in conditional compilation. 2005-01-18 RGerhards */ #endif #ifndef TESTING pid_t ppid = getpid(); #endif int ch; struct hostent *hent; extern int optind; extern char *optarg; uchar *pTmp; #ifndef TESTING chdir ("/"); #endif for (i = 1; i < MAXFUNIX; i++) { funixn[i] = ""; funix[i] = -1; } while ((ch = getopt(argc, argv, "46Aa:dehi:f:l:m:nop:r:s:t:u:vwx")) != EOF) switch((char)ch) { case '4': family = PF_INET; break; case '6': family = PF_INET6; break; case 'A': send_to_all++; break; case 'a': if (nfunix < MAXFUNIX) if(*optarg == ':') { funixParseHost[nfunix] = 1; funixn[nfunix++] = optarg+1; } else { funixParseHost[nfunix] = 0; funixn[nfunix++] = optarg; } else fprintf(stderr, "rsyslogd: Out of descriptors, ignoring %s\n", optarg); break; case 'd': /* debug */ Debug = 1; break; case 'e': /* log every message (no repeat message supression) */ logEveryMsg = 1; break; case 'f': /* configuration file */ ConfFile = optarg; break; case 'h': NoHops = 0; break; case 'i': /* pid file name */ PidFile = optarg; break; case 'l': if (LocalHosts) { fprintf (stderr, "rsyslogd: Only one -l argument allowed," \ "the first one is taken.\n"); break; } LocalHosts = crunch_list(optarg); break; case 'm': /* mark interval */ MarkInterval = atoi(optarg) * 60; break; case 'n': /* don't fork */ NoFork = 1; break; case 'o': /* omit local logging (/dev/log) */ startIndexUxLocalSockets = 1; break; case 'p': /* path to regular log socket */ funixn[0] = optarg; break; case 'r': /* accept remote messages */ AcceptRemote = 1; LogPort = optarg; break; case 's': if (StripDomains) { fprintf (stderr, "rsyslogd: Only one -s argument allowed," \ "the first one is taken.\n"); break; } StripDomains = crunch_list(optarg); break; case 't': /* enable tcp logging */ #ifdef SYSLOG_INET configureTCPListen(optarg); #else fprintf(stderr, "rsyslogd: -t not valid - not compiled for network support"); #endif break; case 'u': /* misc user settings */ if(atoi(optarg) == 1) bParseHOSTNAMEandTAG = 0; break; case 'v': printf("rsyslogd %s, ", VERSION); printf("compiled with:\n"); #ifdef USE_PTHREADS printf("\tFEATURE_PTHREADS (dual-threading)\n"); #endif #ifdef FEATURE_REGEXP printf("\tFEATURE_REGEXP\n"); #endif #ifdef WITH_DB printf("\tFEATURE_DB\n"); #endif #ifndef NOLARGEFILE printf("\tFEATURE_LARGEFILE\n"); #endif #ifdef USE_NETZIP printf("\tFEATURE_NETZIP (syslog message compression)\n"); #endif #ifdef SYSLOG_INET printf("\tSYSLOG_INET (Internet/remote support)\n"); #endif #ifndef NDEBUG printf("\tFEATURE_DEBUG (debug build, slow code)\n"); #endif printf("\nSee http://www.rsyslog.com for more information.\n"); exit(0); /* exit for -v option - so this is a "good one" */ case 'w': /* disable disallowed host warnigs */ option_DisallowWarning = 0; break; case 'x': /* disable dns for remote messages */ DisableDNS = 1; break; case '?': default: usage(); } if ((argc -= optind)) usage(); #ifndef TESTING if ( !(Debug || NoFork) ) { dprintf("Checking pidfile.\n"); if (!check_pid(PidFile)) { signal (SIGTERM, doexit); if (fork()) { /* * Parent process */ sleep(300); /* * Not reached unless something major went wrong. 5 * minutes should be a fair amount of time to wait. * Please note that this procedure is important since * the father must not exit before syslogd isn't * initialized or the klogd won't be able to flush its * logs. -Joey */ exit(1); /* "good" exit - after forking, not diasabling anything */ } num_fds = getdtablesize(); for (i= 0; i < num_fds; i++) (void) close(i); untty(); } else { fputs(" Already running.\n", stderr); exit(1); /* "good" exit, done if syslogd is already running */ } } else #endif debugging_on = 1; #ifndef TESTING /* tuck my process id away */ if ( !Debug ) { dprintf("Writing pidfile.\n"); if (!check_pid(PidFile)) { if (!write_pid(PidFile)) { dprintf("Can't write pid.\n"); exit(1); /* exit during startup - questionable */ } } else { dprintf("Pidfile (and pid) already exist.\n"); exit(1); /* exit during startup - questionable */ } } /* if ( !Debug ) */ #endif myPid = getpid(); /* save our pid for further testing (also used for messages) */ /* initialize the default templates * we use template names with a SP in front - these * can NOT be generated via the configuration file */ pTmp = template_TraditionalFormat; tplAddLine(" TradFmt", &pTmp); pTmp = template_WallFmt; tplAddLine(" WallFmt", &pTmp); pTmp = template_StdFwdFmt; tplAddLine(" StdFwdFmt", &pTmp); pTmp = template_StdUsrMsgFmt; tplAddLine(" StdUsrMsgFmt", &pTmp); pTmp = template_StdDBFmt; tplAddLine(" StdDBFmt", &pTmp); /* prepare emergency logging system */ consfile.f_type = F_CONSOLE; strcpy(consfile.f_un.f_file.f_fname, ctty); cflineSetTemplateAndIOV(&consfile, " TradFmt"); gethostname(LocalHostName, sizeof(LocalHostName)); if ( (p = strchr(LocalHostName, '.')) ) { *p++ = '\0'; LocalDomain = p; } else { LocalDomain = ""; /* * It's not clearly defined whether gethostname() * should return the simple hostname or the fqdn. A * good piece of software should be aware of both and * we want to distribute good software. Joey * * Good software also always checks its return values... * If syslogd starts up before DNS is up & /etc/hosts * doesn't have LocalHostName listed, gethostbyname will * return NULL. */ hent = gethostbyname(LocalHostName); if ( hent ) snprintf(LocalHostName, sizeof(LocalHostName), "%s", hent->h_name); if ( (p = strchr(LocalHostName, '.')) ) { *p++ = '\0'; LocalDomain = p; } } /* Convert to lower case to recognize the correct domain laterly */ for (p = (char *)LocalDomain; *p ; p++) if (isupper((int) *p)) *p = tolower(*p); (void) signal(SIGTERM, doDie); (void) signal(SIGINT, Debug ? doDie : SIG_IGN); (void) signal(SIGQUIT, Debug ? doDie : SIG_IGN); (void) signal(SIGCHLD, reapchild); (void) signal(SIGALRM, domarkAlarmHdlr); (void) signal(SIGUSR1, Debug ? debug_switch : SIG_IGN); (void) signal(SIGPIPE, SIG_IGN); (void) signal(SIGXFSZ, SIG_IGN); /* do not abort if 2gig file limit is hit */ (void) alarm(TIMERINTVL); dprintf("Starting.\n"); init(); #ifndef TESTING if(Debug) { dprintf("Debugging enabled, SIGUSR1 to turn off debugging.\n"); debugging_on = 1; } /* * Send a signal to the parent to it can terminate. */ if (myPid != ppid) kill (ppid, SIGTERM); #endif /* END OF INTIALIZATION * ... but keep in mind that we might do a restart and thus init() might * be called again. If that happens, we must shut down all active threads, * do the init() and then restart things. * rgerhards, 2005-10-24 */ #ifdef USE_PTHREADS /* create message queue */ pMsgQueue = queueInit(); if(pMsgQueue == NULL) { errno = 0; logerror("error: could not create message queue - running single-threaded!\n"); } else { /* start up worker thread */ startWorker(); } #endif /* --------------------- Main loop begins here. ----------------------------------------- */ mainloop(); die(bFinished); return 0; } /* * Local variables: * c-indent-level: 8 * c-basic-offset: 8 * tab-width: 8 * End: * vi:set ai: */