/* Header file with global definitions for the whole * rsyslog project (including all subprojects like * rfc3195d). * Begun 2005-09-15 RGerhards * * Copyright (C) 2005 by Rainer Gerhards and Adiscon GmbH * * This file is part of rsyslog. * * Rsyslog is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * Rsyslog is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with Rsyslog. If not, see . * * A copy of the GPL can be found in the file "COPYING" in this distribution. */ #ifndef INCLUDED_RSYSLOG_H #define INCLUDED_RSYSLOG_H /* ############################################################# * * # Config Settings # * * ############################################################# */ #define RS_STRINGBUF_ALLOC_INCREMENT 128 /* ############################################################# * * # End Config Settings # * * ############################################################# */ #ifndef NOLARGEFILE # undef _LARGEFILE_SOURCE # undef _LARGEFILE64_SOURCE # undef _FILE_OFFSET_BITS # define _LARGEFILE_SOURCE # define _LARGEFILE64_SOURCE # define _FILE_OFFSET_BITS 64 #endif /* some universal 64 bit define... */ typedef long long int64; typedef long long unsigned uint64; typedef int64 number_t; /* type to use for numbers - TODO: maybe an autoconf option? */ #ifdef __hpux typedef unsigned int u_int32_t; /* TODO: is this correct? */ typedef int socklen_t; #endif /* settings for flow control * TODO: is there a better place for them? -- rgerhards, 2008-03-14 */ typedef enum { eFLOWCTL_NO_DELAY = 0, /**< UDP and other non-delayable sources */ eFLOWCTL_LIGHT_DELAY = 1, /**< some light delay possible, but no extended period of time */ eFLOWCTL_FULL_DELAY = 2 /**< delay possible for extended period of time */ } flowControl_t; /* The error codes below are orginally "borrowed" from * liblogging. As such, we reserve values up to -2999 * just in case we need to borrow something more ;) */ enum rsRetVal_ /** return value. All methods return this if not specified otherwise */ { RS_RET_NOT_IMPLEMENTED = -7, /**< implementation is missing (probably internal error or lazyness ;)) */ RS_RET_OUT_OF_MEMORY = -6, /**< memory allocation failed */ RS_RET_PROVIDED_BUFFER_TOO_SMALL = -50,/**< the caller provided a buffer, but the called function sees the size of this buffer is too small - operation not carried out */ RS_RET_TRUE = -1, /**< to indicate a true state (can be used as TRUE, legacy) */ RS_RET_FALSE = -2, /**< to indicate a false state (can be used as FALSE, legacy) */ RS_RET_NO_IRET = -8, /**< This is a trick for the debuging system - it means no iRet is provided */ RS_RET_ERR = -3000, /**< generic failure */ RS_TRUNCAT_TOO_LARGE = -3001, /**< truncation operation where too many chars should be truncated */ RS_RET_FOUND_AT_STRING_END = -3002, /**< some value found, but at the last pos of string */ RS_RET_NOT_FOUND = -3003, /**< some requested value not found */ RS_RET_MISSING_TRAIL_QUOTE = -3004, /**< an expected trailing quote is missing */ RS_RET_NO_DIGIT = -3005, /**< an digit was expected, but none found (mostly parsing) */ RS_RET_NO_MORE_DATA = -3006, /**< insufficient data, e.g. end of string during parsing */ RS_RET_INVALID_IP = -3007, /**< invalid ip found where valid was expected */ RS_RET_OBJ_CREATION_FAILED = - 3008, /**< the creation of an object failed (no details available) */ RS_RET_PARAM_ERROR = -1000, /**< invalid parameter in call to function */ RS_RET_MISSING_INTERFACE = -1001,/**< interface version mismatch, required missing */ RS_RET_INVALID_CORE_INTERFACE = -1002,/**< interface provided by host invalid, can not be used */ RS_RET_ENTRY_POINT_NOT_FOUND = -1003,/**< a requested entry point was not found */ RS_RET_MODULE_ENTRY_POINT_NOT_FOUND = -1004,/**< a entry point requested from a module was not present in it */ RS_RET_OBJ_NOT_AVAILABLE = -1005,/**< something could not be completed because the required object is not available*/ RS_RET_LOAD_ERROR = -1006,/**< we had an error loading the object/interface and can not continue */ RS_RET_MODULE_STILL_REFERENCED = -1007,/**< module could not be unloaded because it still is referenced by someone */ RS_RET_OBJ_UNKNOWN = -1008,/**< object is unknown where required */ RS_RET_OBJ_NOT_REGISTERED = -1009,/**< tried to unregister an object that is not registered */ /* return states for config file processing */ RS_RET_NONE = -2000, /**< some value is not available - not necessarily an error */ RS_RET_CONFLINE_UNPROCESSED = -2001,/**< config line was not processed, pass to other module */ RS_RET_DISCARDMSG = -2002, /**< discard message (no error state, processing request!) */ RS_RET_INCOMPATIBLE = -2003, /**< function not compatible with requested feature */ RS_RET_NOENTRY = -2004, /**< do not create an entry for (whatever) - not necessary an error */ RS_RET_NO_SQL_STRING = -2005, /**< string is not suitable for use as SQL */ RS_RET_DISABLE_ACTION = -2006, /**< action requests that it be disabled */ RS_RET_SUSPENDED = -2007, /**< something was suspended, not neccesarily an error */ RS_RET_RQD_TPLOPT_MISSING = -2008,/**< a required template option is missing */ RS_RET_INVALID_VALUE = -2009,/**< some value is invalid (e.g. user-supplied data) */ RS_RET_INVALID_INT = -2010,/**< invalid integer */ RS_RET_INVALID_CMD = -2011,/**< invalid command */ RS_RET_VAL_OUT_OF_RANGE = -2012, /**< value out of range */ RS_RET_FOPEN_FAILURE = -2013, /**< failure during fopen, for example file not found - see errno */ RS_RET_END_OF_LINKEDLIST = -2014, /**< end of linked list, not an error, but a status */ RS_RET_CHAIN_NOT_PERMITTED = -2015, /**< chaining (e.g. of config command handlers) not permitted */ RS_RET_INVALID_PARAMS = -2016,/**< supplied parameters are invalid */ RS_RET_EMPTY_LIST = -2017, /**< linked list is empty */ RS_RET_FINISHED = -2018, /**< some opertion is finished, not an error state */ RS_RET_INVALID_SOURCE = -2019, /**< source (address) invalid for some reason */ RS_RET_ADDRESS_UNKNOWN = -2020, /**< an address is unknown - not necessarily an error */ RS_RET_MALICIOUS_ENTITY = -2021, /**< there is an malicious entity involved */ RS_RET_NO_KERNEL_LOGSRC = -2022, /**< no source for kernel logs can be obtained */ RS_RET_TCP_SEND_ERROR = -2023, /**< error during TCP send process */ RS_RET_GSS_SEND_ERROR = -2024, /**< error during GSS (via TCP) send process */ RS_RET_TCP_SOCKCREATE_ERR = -2025, /**< error during creation of TCP socket */ RS_RET_GSS_SENDINIT_ERROR = -2024, /**< error during GSS (via TCP) send initialization process */ RS_RET_QUEUE_FULL = -2025, /**< queue is full, operation could not be completed */ RS_RET_EOF = -2026, /**< end of file reached, not necessarily an error */ RS_RET_IO_ERROR = -2027, /**< some kind of IO error happened */ RS_RET_INVALID_OID = -2028, /**< invalid object ID */ RS_RET_INVALID_HEADER = -2029, /**< invalid header */ RS_RET_INVALID_HEADER_VERS = -2030, /**< invalid header version */ RS_RET_INVALID_DELIMITER = -2031, /**< invalid delimiter, e.g. between params */ RS_RET_INVALID_PROPFRAME = -2032, /**< invalid framing in serialized property */ RS_RET_NO_PROPLINE = -2033, /**< line is not a property line */ RS_RET_INVALID_TRAILER = -2034, /**< invalid trailer */ RS_RET_VALUE_TOO_LOW = -2035, /**< a provided value is too low */ RS_RET_FILE_PREFIX_MISSING = -2036, /**< a required file prefix (parameter?) is missing */ RS_RET_INVALID_HEADER_RECTYPE = -2037, /**< invalid record type in header or invalid header */ RS_RET_QTYPE_MISMATCH = -2038, /**< different qType when reading back a property type */ RS_RET_NO_FILE_ACCESS = -2039, /**< covers EACCES error on file open() */ RS_RET_FILE_NOT_FOUND = -2040, /**< file not found */ RS_RET_TIMED_OUT = -2041, /**< timeout occured (not necessarily an error) */ RS_RET_QSIZE_ZERO = -2042, /**< queue size is zero where this is not supported */ RS_RET_ALREADY_STARTING = -2043, /**< something (a thread?) is already starting - not necessarily an error */ RS_RET_NO_MORE_THREADS = -2044, /**< no more threads available, not necessarily an error */ RS_RET_NO_FILEPREFIX = -2045, /**< file prefix is not specified where one is needed */ RS_RET_CONFIG_ERROR = -2046, /**< there is a problem with the user-provided config settigs */ RS_RET_OUT_OF_DESRIPTORS = -2047, /**< a descriptor table's space has been exhausted */ RS_RET_NO_DRIVERS = -2048, /**< a required drivers missing */ RS_RET_NO_DRIVERNAME = -2049, /**< driver name missing where one was required */ RS_RET_EOS = -2050, /**< end of stream (of whatever) */ RS_RET_SYNTAX_ERROR = -2051, /**< syntax error, eg. during parsing */ RS_RET_INVALID_OCTAL_DIGIT = -2052, /**< invalid octal digit during parsing */ RS_RET_INVALID_HEX_DIGIT = -2053, /**< invalid hex digit during parsing */ RS_RET_INTERFACE_NOT_SUPPORTED = -2054, /**< interface not supported */ RS_RET_OUT_OF_STACKSPACE = -2055, /**< a stack data structure is exhausted and can not be grown */ RS_RET_STACK_EMPTY = -2056, /**< a pop was requested on a stack, but the stack was already empty */ RS_RET_INVALID_VMOP = -2057, /**< invalid virtual machine instruction */ RS_RET_INVALID_VAR = -2058, /**< a var_t or its content is unsuitable, eg. VARTYPE_NONE */ RS_RET_INVALID_NUMBER = -2059, /**< number invalid during parsing */ RS_RET_NOT_A_NUMBER = -2060, /**< e.g. conversion impossible because the string is not a number */ RS_RET_OBJ_ALREADY_REGISTERED = -2061, /**< object (name) is already registered */ RS_RET_OBJ_REGISTRY_OUT_OF_SPACE = -2062, /**< the object registry has run out of space */ RS_RET_HOST_NOT_PERMITTED = -2063, /**< a host is not permitted to perform an action it requested */ /* RainerScript error messages (range 1000.. 1999) */ RS_RET_SYSVAR_NOT_FOUND = 1001, /**< system variable could not be found (maybe misspelled) */ /* some generic error/status codes */ RS_RET_OK_DELETE_LISTENTRY = 1, /**< operation successful, but callee requested the deletion of an entry (special state) */ RS_RET_TERMINATE_NOW = 2, /**< operation successful, function is requested to terminate (mostly used with threads) */ RS_RET_NO_RUN = 3, /**< operation successful, but function does not like to be executed */ RS_RET_OK = 0 /**< operation successful */ }; typedef enum rsRetVal_ rsRetVal; /**< friendly type for global return value */ /* some helpful macros to work with srRetVals. * Be sure to call the to-be-returned variable always "iRet" and * the function finalizer always "finalize_it". */ #define CHKiRet(code) if((iRet = code) != RS_RET_OK) goto finalize_it /* macro below is to be used if we need our own handling, eg for cleanup */ #define CHKiRet_Hdlr(code) if((iRet = code) != RS_RET_OK) /* macro below is used in conjunction with CHKiRet_Hdlr, else use ABORT_FINALIZE */ #define FINALIZE goto finalize_it; #define DEFiRet BEGINfunc rsRetVal iRet = RS_RET_OK #define RETiRet do{ ENDfuncIRet return iRet; }while(0) #define ABORT_FINALIZE(errCode) \ do { \ iRet = errCode; \ goto finalize_it; \ } while (0) /** Object ID. These are for internal checking. Each * object is assigned a specific ID. This is contained in * all Object structs (just like C++ RTTI). We can use * this field to see if we have been passed a correct ID. * Other than that, there is currently no other use for * the object id. */ enum rsObjectID { OIDrsFreed = -1, /**< assigned, when an object is freed. If this * is seen during a method call, this is an * invalid object pointer! */ OIDrsInvalid = 0, /**< value created by calloc(), so do not use ;) */ /* The 0x3412 is a debug aid. It helps us find object IDs in memory * dumps (on X86, this is 1234 in the dump ;) * If you are on an embedded device and you would like to save space * make them 1 byte only. */ OIDrsCStr = 0x34120001, OIDrsPars = 0x34120002 }; typedef enum rsObjectID rsObjID; /* support to set object types */ #ifdef NDEBUG #define rsSETOBJTYPE(pObj, type) #define rsCHECKVALIDOBJECT(x, type) #else #define rsSETOBJTYPE(pObj, type) pObj->OID = type; #define rsCHECKVALIDOBJECT(x, type) {assert(x != NULL); assert(x->OID == type);} #endif /** * This macro should be used to free objects. * It aids in interpreting dumps during debugging. */ #ifdef NDEBUG #define RSFREEOBJ(x) free(x) #else #define RSFREEOBJ(x) {(x)->OID = OIDrsFreed; free(x);} #endif /* get rid of the unhandy "unsigned char" */ typedef unsigned char uchar; /* for the time being, we do our own portability handling here. It * looks like autotools either does not yet support checks for it, or * I wasn't smart enough to find them ;) rgerhards, 2007-07-18 */ #ifndef __GNUC__ # define __attribute__(x) /*NOTHING*/ #endif /* The following prototype is convenient, even though it may not be the 100% correct place.. -- rgerhards 2008-01-07 */ void dbgprintf(char *, ...) __attribute__((format(printf, 1, 2))); #include "debug.h" #endif /* multi-include protection */ /* * vi:set ai: */