diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/Makefile.am | 6 | ||||
| -rw-r--r-- | tools/gethostn.c | 47 | ||||
| -rw-r--r-- | tools/iminternal.c | 3 | ||||
| -rw-r--r-- | tools/omfwd.c | 5 | ||||
| -rw-r--r-- | tools/rsyslogd.8 | 33 | ||||
| -rw-r--r-- | tools/syslogd.c | 287 |
6 files changed, 275 insertions, 106 deletions
diff --git a/tools/Makefile.am b/tools/Makefile.am index b2b7a8ca..a265af9c 100644 --- a/tools/Makefile.am +++ b/tools/Makefile.am @@ -21,9 +21,13 @@ rsyslogd_SOURCES = \ pidfile.h \ \ ../dirty.h - rsyslogd_CPPFLAGS = $(pthreads_cflags) $(rsrt_cflags) rsyslogd_LDADD = $(zlib_libs) $(pthreads_libs) $(rsrt_libs) rsyslogd_LDFLAGS = -export-dynamic +if ENABLE_DIAGTOOLS +sbin_PROGRAMS += rsyslog_diag_hostname +rsyslog_diag_hostname_SOURCES = gethostn.c +endif + EXTRA_DIST = $(man_MANS) diff --git a/tools/gethostn.c b/tools/gethostn.c new file mode 100644 index 00000000..df7ce38b --- /dev/null +++ b/tools/gethostn.c @@ -0,0 +1,47 @@ +/* gethostn - a small diagnostic utility to show what the + * gethostname() API returns. Of course, this tool duplicates + * functionality already found in other tools. But the point is + * that the API shall be called by a program that is compiled like + * rsyslogd and does exactly what rsyslog does. + * + * Copyright 2008 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ + +#include "config.h" +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> + +int main(int __attribute__((unused)) argc, char __attribute__((unused)) *argv[]) +{ + char hostname[4096]; /* this should always be sufficient ;) */ + int err; + + err = gethostname(hostname, sizeof(hostname)); + + if(err) { + perror("gethostname failed"); + exit(1); + } + + printf("hostname of this system is '%s'.\n", hostname); + + return 0; +} diff --git a/tools/iminternal.c b/tools/iminternal.c index 60460a99..0ceff3d8 100644 --- a/tools/iminternal.c +++ b/tools/iminternal.c @@ -185,6 +185,5 @@ rsRetVal modExitIminternal(void) RETiRet; } -/* - * vi:set ai: +/* vim:set ai: */ diff --git a/tools/omfwd.c b/tools/omfwd.c index 1b617ee1..df2f0342 100644 --- a/tools/omfwd.c +++ b/tools/omfwd.c @@ -509,6 +509,9 @@ CODE_STD_STRING_REQUESTparseSelectorAct(1) * applies to TCP-based syslog only and is ignored when specified with UDP). * That is not yet implemented. * rgerhards, 2006-12-07 + * In order to support IPv6 addresses, we must introduce an extension to + * the hostname. If it is in square brackets, whatever is in them is treated as + * the hostname - without any exceptions ;) -- rgerhards, 2008-08-05 */ if(*p == '(') { /* at this position, it *must* be an option indicator */ @@ -555,6 +558,7 @@ CODE_STD_STRING_REQUESTparseSelectorAct(1) */ errmsg.LogError(0, NO_ERRCODE, "Option block not terminated in forwarding action."); } + /* extract the host first (we do a trick - we replace the ';' or ':' with a '\0') * now skip to port and then template name. rgerhards 2005-07-06 */ @@ -604,6 +608,7 @@ CODE_STD_STRING_REQUESTparseSelectorAct(1) } else { CHKmalloc(pData->f_hname = strdup((char*) q)); } +dbgprintf("hostname '%s', port '%s'\n", pData->f_hname, pData->port); /* process template */ CHKiRet(cflineParseTemplateName(&p, *ppOMSR, 0, OMSR_NO_RQD_TPL_OPTS, diff --git a/tools/rsyslogd.8 b/tools/rsyslogd.8 index 91f2016e..05905412 100644 --- a/tools/rsyslogd.8 +++ b/tools/rsyslogd.8 @@ -1,7 +1,7 @@ .\" Copyright 2004-2008 Rainer Gerhards and Adiscon for the rsyslog modifications .\" May be distributed under the GNU General Public License .\" -.TH RSYSLOGD 8 "11 July 2008" "Version 3.18.0" "Linux System Administration" +.TH RSYSLOGD 8 "29 July 2008" "Version 3.21.1" "Linux System Administration" .SH NAME rsyslogd \- reliable and extended syslogd .SH SYNOPSIS @@ -21,12 +21,18 @@ rsyslogd \- reliable and extended syslogd .I hostlist ] .RB [ " \-n " ] +.RB [ " \-N " +.I level +] .br .RB [ " \-q " ] .RB [ " \-Q " ] .RB [ " \-s " .I domainlist ] +.RB [ " \-u " +.I userlevel +] .RB [ " \-v " ] .RB [ " \-w " ] .RB [ " \-x " ] @@ -166,6 +172,19 @@ Avoid auto-backgrounding. This is needed especially if the is started and controlled by .BR init (8). .TP +.B "\-N " "level" +Do a coNfig check. Do NOT run in regular mode, just check configuration +file correctness. +This option is meant to verify a config file. To do so, run rsyslogd +interactively in foreground, specifying -f <config-file> and -N level. +The level argument modifies behaviour. Currently, 0 is the same as +not specifying the -N option at all (so this makes limited sense) and +1 actually activates the code. Later, higher levels will mean more +verbosity (this is a forward-compatibility option). +.B rsyslogd +is started and controlled by +.BR init (8). +.TP .BI "\-q " "add hostname if DNS fails during ACL processing" During ACL processing, hostnames are resolved to IP addreses for performance reasons. If DNS fails during that process, the hostname @@ -186,6 +205,18 @@ is specified and the host logging resolves to satu.infodrom.north.de no domain would be cut, you will have to specify two domains like: .BR "\-s north.de:infodrom.north.de" . .TP +.BI "\-u " "userlevel" +This is a "catch all" option for some very seldomly-used user settings. +The "userlevel" variable selects multiple things. Add the specific values +to get the combined effect of them. +A value of 1 prevents rsyslogd from parsing hostnames and tags inside +messages. +A value of 2 prevents rsyslogd from changing to the root directory. This +is almost never a good idea in production use. This option was introduced +in support of the internal testbed. +To combine these two features, use a userlevel of 3 (1+2). Whenever you use +an -u option, make sure you really understand what you do and why you do it. +.TP .B "\-v" Print version and exit. .TP diff --git a/tools/syslogd.c b/tools/syslogd.c index e432a67d..758d5ed1 100644 --- a/tools/syslogd.c +++ b/tools/syslogd.c @@ -255,6 +255,7 @@ static int bFinished = 0; /* used by termination signal handler, read-only excep * is either 0 or the number of the signal that requested the * termination. */ +static int iConfigVerify = 0; /* is this just a config verify run? */ /* Intervals at which we flush out "message repeated" messages, * in seconds after previous message is logged. After each flush, @@ -285,6 +286,7 @@ static int bDebugPrintCfSysLineHandlerList = 1;/* output cfsyslinehandler list i static int bDebugPrintModuleList = 1;/* output module list in debug mode? */ static uchar cCCEscapeChar = '\\';/* character to be used to start an escape sequence for control chars */ static int bEscapeCCOnRcv = 1; /* escape control characters on reception: 0 - no, 1 - yes */ +static int bErrMsgToStderr = 1; /* print error messages to stderr (in addition to everything else)? */ int bReduceRepeatMsgs; /* reduce repeated message - 0 - no, 1 - yes */ int bActExecWhenPrevSusp; /* execute action only when previous one was suspended? */ int iActExecOnceInterval = 0; /* execute action once every nn seconds */ @@ -418,7 +420,7 @@ static void processImInternal(void); static int usage(void) { fprintf(stderr, "usage: rsyslogd [-cversion] [-46AdnqQvwx] [-lhostlist] [-sdomainlist]\n" - " [-fconffile] [-ipidfile]\n" + " [-fconffile] [-ipidfile] [-Nlevel]\n" "To run rsyslogd in native mode, use \"rsyslogd -c3 <other options>\"\n\n" "For further information see http://www.rsyslog.com/doc\n"); exit(1); /* "good" exit - done to terminate usage() */ @@ -870,6 +872,7 @@ submitErrMsg(int iErr, uchar *msg) RETiRet; } + /* rgerhards 2004-11-09: the following is a function that can be used * to log a message orginating from the syslogd itself. In sysklogd code, * this is done by simply calling logmsg(). However, logmsg() is changed in @@ -908,6 +911,18 @@ logmsgInternal(int iErr, int pri, uchar *msg, int flags) datetime.getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */ flags |= INTERNAL_MSG; + /* we now check if we should print internal messages out to stderr. This was + * suggested by HKS as a way to help people troubleshoot rsyslog configuration + * (by running it interactively. This makes an awful lot of sense, so I add + * it here. -- rgerhards, 2008-07-28 + * Note that error messages can not be disable during a config verify. This + * permits us to process unmodified config files which otherwise contain a + * supressor statement. + */ + if(bErrMsgToStderr || iConfigVerify) { + fprintf(stderr, "rsyslogd: %s\n", msg); + } + if(bHaveMainQueue == 0) { /* not yet in queued mode */ iminternalAddMsg(pri, pMsg, flags); } else { @@ -1771,7 +1786,7 @@ void legacyOptsParseTCP(char ch, char *arg) static char conflict = '\0'; if((conflict == 'g' && ch == 't') || (conflict == 't' && ch == 'g')) { - fprintf(stderr, "rsyslog: If you want to use both -g and -t, use directives instead, -%c ignored.\n", ch); + fprintf(stderr, "rsyslogd: If you want to use both -g and -t, use directives instead, -%c ignored.\n", ch); return; } else conflict = ch; @@ -2190,11 +2205,15 @@ startInputModules(void) /* INIT -- Initialize syslogd from configuration table * init() is called at initial startup AND each time syslogd is HUPed + * Note that if iConfigVerify is set, only the config file is verified but nothing + * else happens. -- rgerhards, 2008-07-28 */ -static void +static rsRetVal init(void) { DEFiRet; + rsRetVal localRet; + int iNbrActions; char cbuf[BUFSIZ]; char bufStartUpMsg[512]; struct sigaction sigAct; @@ -2237,22 +2256,42 @@ init(void) */ conf.cfsysline((uchar*)"ResetConfigVariables"); + conf.ReInitConf(); + /* open the configuration file */ - if((iRet = conf.processConfFile(ConfFile)) != RS_RET_OK) { + localRet = conf.processConfFile(ConfFile); + CHKiRet(conf.GetNbrActActions(&iNbrActions)); + + if(localRet != RS_RET_OK) { + errmsg.LogError(0, localRet, "CONFIG ERROR: could not interpret master config file '%s'.", ConfFile); + } else if(iNbrActions == 0) { + errmsg.LogError(0, RS_RET_NO_ACTIONS, "CONFIG ERROR: there are no active actions configured. Inputs will " + "run, but no output whatsoever is created."); + } + + if(localRet != RS_RET_OK || iNbrActions == 0) { /* rgerhards: this code is executed to set defaults when the * config file could not be opened. We might think about * abandoning the run in this case - but this, too, is not * very clever... So we stick with what we have. * We ignore any errors while doing this - we would be lost anyhow... */ + errmsg.LogError(0, NO_ERRCODE, "EMERGENCY CONFIGURATION ACTIVATED - fix rsyslog config file!"); selector_t *f = NULL; - char szTTYNameBuf[_POSIX_TTY_NAME_MAX+1]; /* +1 for NULL character */ - dbgprintf("primary config file could not be opened - using emergency definitions.\n"); + + /* note: we previously used _POSIY_TTY_NAME_MAX+1, but this turned out to be + * too low on linux... :-S -- rgerhards, 2008-07-28 + */ + char szTTYNameBuf[128]; conf.cfline((uchar*)"*.ERR\t" _PATH_CONSOLE, &f); + conf.cfline((uchar*)"syslog.*\t" _PATH_CONSOLE, &f); conf.cfline((uchar*)"*.PANIC\t*", &f); + conf.cfline((uchar*)"syslog.*\troot", &f); if(ttyname_r(0, szTTYNameBuf, sizeof(szTTYNameBuf)) == 0) { snprintf(cbuf,sizeof(cbuf), "*.*\t%s", szTTYNameBuf); conf.cfline((uchar*)cbuf, &f); + } else { + dbgprintf("error %d obtaining controlling terminal, not using that emergency rule\n", errno); } selectorAddList(f); } @@ -2290,6 +2329,12 @@ init(void) } } + /* we are done checking the config - now validate if we should actually run or not. + * If not, terminate. -- rgerhards, 2008-07-25 + */ + if(iConfigVerify) + ABORT_FINALIZE(RS_RET_VALIDATION_RUN); + /* switch the message object to threaded operation, if necessary */ if(MainMsgQueType == QUEUETYPE_DIRECT || iMainMsgQueueNumWorkers > 1) { MsgEnableThreadSafety(); @@ -2371,7 +2416,9 @@ init(void) sigaction(SIGHUP, &sigAct, NULL); dbgprintf(" (re)started.\n"); - ENDfunc + +finalize_it: + RETiRet; } @@ -2638,7 +2685,6 @@ static rsRetVal loadBuildInModules(void) * is that rsyslog will terminate if we can not register our built-in config commands. * This, I think, is the right thing to do. -- rgerhards, 2007-07-31 */ -// CHKiRet(regCfSysLineHdlr((uchar *)"workdirectory", 0, eCmdHdlrGetWord, NULL, &pszWorkDir, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionresumeretrycount", 0, eCmdHdlrInt, NULL, &glbliActionResumeRetryCount, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuefilename", 0, eCmdHdlrGetWord, NULL, &pszMainMsgQFName, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesize", 0, eCmdHdlrInt, NULL, &iMainMsgQueueSize, NULL)); @@ -2679,6 +2725,7 @@ static rsRetVal loadBuildInModules(void) NULL, &bDebugPrintCfSysLineHandlerList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"moddir", 0, eCmdHdlrGetWord, NULL, &pModDir, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"errormessagestostderr", 0, eCmdHdlrBinary, NULL, &bErrMsgToStderr, NULL)); /* now add other modules handlers (we should work on that to be able to do it in ClassInit(), but so far * that is not possible). -- rgerhards, 2008-01-28 @@ -2734,9 +2781,9 @@ static void printVersion(void) * move code out of the too-long main() function. * rgerhards, 2007-10-17 */ -static void mainThread() +static rsRetVal mainThread() { - BEGINfunc + DEFiRet; uchar *pTmp; /* Note: signals MUST be processed by the thread this code is running in. The reason @@ -2765,7 +2812,8 @@ static void mainThread() pTmp = template_StdPgSQLFmt; tplLastStaticInit(tplAddLine(" StdPgSQLFmt", &pTmp)); - init(); + CHKiRet(init()); + if(Debug) { dbgprintf("Debugging enabled, SIGUSR1 to turn off debugging.\n"); debugging_on = 1; @@ -2784,7 +2832,9 @@ static void mainThread() dbgprintf("initialization completed, transitioning to regular run mode\n"); mainloop(); - ENDfunc + +finalize_it: + RETiRet; } @@ -2967,6 +3017,98 @@ finalize_it: } +/* global initialization, to be done only once and before the mainloop is started. + * rgerhards, 2008-07-28 (extracted from realMain()) + */ +static rsRetVal +doGlblProcessInit(void) +{ + struct sigaction sigAct; + int num_fds; + int i; + DEFiRet; + + checkPermissions(); + thrdInit(); + + if( !(Debug || NoFork) ) + { + dbgprintf("Checking pidfile.\n"); + if (!check_pid(PidFile)) + { + memset(&sigAct, 0, sizeof (sigAct)); + sigemptyset(&sigAct.sa_mask); + sigAct.sa_handler = doexit; + sigaction(SIGTERM, &sigAct, NULL); + + if (fork()) { + /* Parent process + */ + sleep(300); + /* Not reached unless something major went wrong. 5 + * minutes should be a fair amount of time to wait. + * Please note that this procedure is important since + * the father must not exit before syslogd isn't + * initialized or the klogd won't be able to flush its + * logs. -Joey + */ + exit(1); /* "good" exit - after forking, not diasabling anything */ + } + num_fds = getdtablesize(); + for (i= 0; i < num_fds; i++) + (void) close(i); + untty(); + } + else + { + fputs(" Already running.\n", stderr); + exit(1); /* "good" exit, done if syslogd is already running */ + } + } + else + debugging_on = 1; + + /* tuck my process id away */ + dbgprintf("Writing pidfile %s.\n", PidFile); + if (!check_pid(PidFile)) + { + if (!write_pid(PidFile)) + { + fputs("Can't write pid.\n", stderr); + exit(1); /* exit during startup - questionable */ + } + } + else + { + fputs("Pidfile (and pid) already exist.\n", stderr); + exit(1); /* exit during startup - questionable */ + } + myPid = getpid(); /* save our pid for further testing (also used for messages) */ + + memset(&sigAct, 0, sizeof (sigAct)); + sigemptyset(&sigAct.sa_mask); + + sigAct.sa_handler = sigsegvHdlr; + sigaction(SIGSEGV, &sigAct, NULL); + sigAct.sa_handler = sigsegvHdlr; + sigaction(SIGABRT, &sigAct, NULL); + sigAct.sa_handler = doDie; + sigaction(SIGTERM, &sigAct, NULL); + sigAct.sa_handler = Debug ? doDie : SIG_IGN; + sigaction(SIGINT, &sigAct, NULL); + sigaction(SIGQUIT, &sigAct, NULL); + sigAct.sa_handler = reapchild; + sigaction(SIGCHLD, &sigAct, NULL); + sigAct.sa_handler = Debug ? debug_switch : SIG_IGN; + sigaction(SIGUSR1, &sigAct, NULL); + sigAct.sa_handler = SIG_IGN; + sigaction(SIGPIPE, &sigAct, NULL); + sigaction(SIGXFSZ, &sigAct, NULL); /* do not abort if 2gig file limit is hit */ + + RETiRet; +} + + /* This is the main entry point into rsyslogd. Over time, we should try to * modularize it a bit more... */ @@ -2974,16 +3116,15 @@ int realMain(int argc, char **argv) { DEFiRet; - register int i; register uchar *p; - int num_fds; int ch; struct hostent *hent; extern int optind; extern char *optarg; - struct sigaction sigAct; int bEOptionWasGiven = 0; int bImUxSockLoaded = 0; /* already generated a $ModLoad imuxsock? */ + int iHelperUOpt; + int bChDirRoot = 1; /* change the current working directory to "/"? */ char *arg; /* for command line option processing */ uchar legacyConfLine[80]; uchar *LocalHostName; @@ -3003,7 +3144,7 @@ int realMain(int argc, char **argv) * only when actually neeeded. * rgerhards, 2008-04-04 */ - while ((ch = getopt(argc, argv, "46aAc:def:g:hi:l:m:M:nopqQr::s:t:u:vwx")) != EOF) { + while((ch = getopt(argc, argv, "46aAc:def:g:hi:l:m:M:nN:opqQr::s:t:u:vwx")) != EOF) { switch((char)ch) { case '4': case '6': @@ -3015,6 +3156,7 @@ int realMain(int argc, char **argv) case 'l': case 'm': /* mark interval */ case 'n': /* don't fork */ + case 'N': /* enable config verify mode */ case 'o': case 'p': case 'q': /* add hostname if DNS resolving has failed */ @@ -3078,9 +3220,6 @@ int realMain(int argc, char **argv) ppid = getpid(); - if(chdir ("/") != 0) - fprintf(stderr, "Can not do 'cd /' - still trying to run\n"); - CHKiRet_Hdlr(InitGlobalClasses()) { fprintf(stderr, "rsyslogd initializiation failed - global classes could not be initialized.\n" "Did you do a \"make install\"?\n" @@ -3213,6 +3352,9 @@ int realMain(int argc, char **argv) case 'n': /* don't fork */ NoFork = 1; break; + case 'N': /* enable config verify mode */ + iConfigVerify = atoi(arg); + break; case 'o': if(iCompatibilityMode < 3) { if(!bImUxSockLoaded) { @@ -3263,8 +3405,11 @@ int realMain(int argc, char **argv) fprintf(stderr, "-t option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 'u': /* misc user settings */ - if(atoi(arg) == 1) + iHelperUOpt = atoi(arg); + if(iHelperUOpt & 0x01) bParseHOSTNAMEandTAG = 0; + if(iHelperUOpt & 0x02) + bChDirRoot = 0; break; case 'w': /* disable disallowed host warnigs */ glbl.SetOption_DisallowWarning(0); @@ -3281,6 +3426,17 @@ int realMain(int argc, char **argv) if(iRet != RS_RET_END_OF_LINKEDLIST) FINALIZE; + if(iConfigVerify) { + fprintf(stderr, "rsyslogd: version %s, config validation run (level %d), master config %s\n", + VERSION, iConfigVerify, ConfFile); + } + + if(bChDirRoot) { + if(chdir("/") != 0) + fprintf(stderr, "Can not do 'cd /' - still trying to run\n"); + } + + /* process compatibility mode settings */ if(iCompatibilityMode < 3) { errmsg.LogError(0, NO_ERRCODE, "WARNING: rsyslogd is running in compatibility mode. Automatically " @@ -3304,86 +3460,10 @@ int realMain(int argc, char **argv) "more and cast your vote if you want us to keep this feature."); } - checkPermissions(); - thrdInit(); + if(!iConfigVerify) + CHKiRet(doGlblProcessInit()); - if( !(Debug || NoFork) ) - { - dbgprintf("Checking pidfile.\n"); - if (!check_pid(PidFile)) - { - memset(&sigAct, 0, sizeof (sigAct)); - sigemptyset(&sigAct.sa_mask); - sigAct.sa_handler = doexit; - sigaction(SIGTERM, &sigAct, NULL); - - if (fork()) { - /* - * Parent process - */ - sleep(300); - /* - * Not reached unless something major went wrong. 5 - * minutes should be a fair amount of time to wait. - * Please note that this procedure is important since - * the father must not exit before syslogd isn't - * initialized or the klogd won't be able to flush its - * logs. -Joey - */ - exit(1); /* "good" exit - after forking, not diasabling anything */ - } - num_fds = getdtablesize(); - for (i= 0; i < num_fds; i++) - (void) close(i); - untty(); - } - else - { - fputs(" Already running.\n", stderr); - exit(1); /* "good" exit, done if syslogd is already running */ - } - } - else - debugging_on = 1; - - /* tuck my process id away */ - dbgprintf("Writing pidfile %s.\n", PidFile); - if (!check_pid(PidFile)) - { - if (!write_pid(PidFile)) - { - fputs("Can't write pid.\n", stderr); - exit(1); /* exit during startup - questionable */ - } - } - else - { - fputs("Pidfile (and pid) already exist.\n", stderr); - exit(1); /* exit during startup - questionable */ - } - myPid = getpid(); /* save our pid for further testing (also used for messages) */ - - memset(&sigAct, 0, sizeof (sigAct)); - sigemptyset(&sigAct.sa_mask); - - sigAct.sa_handler = sigsegvHdlr; - sigaction(SIGSEGV, &sigAct, NULL); - sigAct.sa_handler = sigsegvHdlr; - sigaction(SIGABRT, &sigAct, NULL); - sigAct.sa_handler = doDie; - sigaction(SIGTERM, &sigAct, NULL); - sigAct.sa_handler = Debug ? doDie : SIG_IGN; - sigaction(SIGINT, &sigAct, NULL); - sigaction(SIGQUIT, &sigAct, NULL); - sigAct.sa_handler = reapchild; - sigaction(SIGCHLD, &sigAct, NULL); - sigAct.sa_handler = Debug ? debug_switch : SIG_IGN; - sigaction(SIGUSR1, &sigAct, NULL); - sigAct.sa_handler = SIG_IGN; - sigaction(SIGPIPE, &sigAct, NULL); - sigaction(SIGXFSZ, &sigAct, NULL); /* do not abort if 2gig file limit is hit */ - - mainThread(); + CHKiRet(mainThread()); /* do any de-init's that need to be done AFTER this comment */ @@ -3392,9 +3472,12 @@ int realMain(int argc, char **argv) thrdExit(); finalize_it: - if(iRet != RS_RET_OK) - fprintf(stderr, "rsyslogd run failed with error %d\n(see rsyslog.h " - "or http://www.rsyslog.com/errcode to learn what that number means)\n", iRet); + if(iRet == RS_RET_VALIDATION_RUN) { + fprintf(stderr, "rsyslogd: End of config validation run. Bye.\n"); + } else if(iRet != RS_RET_OK) { + fprintf(stderr, "rsyslogd run failed with error %d (see rsyslog.h " + "or try http://www.rsyslog.com/e/%d to learn what that number means)\n", iRet, iRet*-1); + } ENDfunc return 0; |