diff options
Diffstat (limited to 'tools/syslogd.c')
-rw-r--r-- | tools/syslogd.c | 1154 |
1 files changed, 140 insertions, 1014 deletions
diff --git a/tools/syslogd.c b/tools/syslogd.c index 5e9d070d..79cab162 100644 --- a/tools/syslogd.c +++ b/tools/syslogd.c @@ -108,18 +108,6 @@ #include "action.h" #include "iminternal.h" #include "cfsysline.h" -#include "omshell.h" -#include "omusrmsg.h" -#include "omfwd.h" -#include "omfile.h" -#include "ompipe.h" -#include "omdiscard.h" -#include "pmrfc5424.h" -#include "pmrfc3164.h" -#include "smfile.h" -#include "smtradfile.h" -#include "smfwd.h" -#include "smtradfwd.h" #include "threads.h" #include "wti.h" #include "queue.h" @@ -133,8 +121,9 @@ #include "ruleset.h" #include "rule.h" #include "net.h" -#include "vm.h" #include "prop.h" +#include "rsconf.h" +#include "dnscache.h" #include "sd-daemon.h" /* definitions for objects we access */ @@ -142,13 +131,13 @@ DEFobjCurrIf(obj) DEFobjCurrIf(glbl) DEFobjCurrIf(datetime) /* TODO: make go away! */ DEFobjCurrIf(conf) -DEFobjCurrIf(expr) DEFobjCurrIf(module) DEFobjCurrIf(errmsg) DEFobjCurrIf(rule) DEFobjCurrIf(ruleset) DEFobjCurrIf(prop) DEFobjCurrIf(parser) +DEFobjCurrIf(rsconf) DEFobjCurrIf(net) /* TODO: make go away! */ @@ -199,8 +188,9 @@ static rsRetVal queryLocalHostname(void); # define _PATH_TTY "/dev/tty" #endif +rsconf_t *ourConf; /* our config object */ + static prop_t *pInternalInputName = NULL; /* there is only one global inputName for all internally-generated messages */ -static prop_t *pLocalHostIP = NULL; /* there is only one global IP for all internally-generated messages */ static uchar *ConfFile = (uchar*) _PATH_LOGCONF; /* read-only after startup */ static char *PidFile = _PATH_LOGPID; /* read-only after startup */ @@ -212,7 +202,7 @@ static int bFinished = 0; /* used by termination signal handler, read-only excep * is either 0 or the number of the signal that requested the * termination. */ -static int iConfigVerify = 0; /* is this just a config verify run? */ +int iConfigVerify = 0; /* is this just a config verify run? */ /* Intervals at which we flush out "message repeated" messages, * in seconds after previous message is logged. After each flush, @@ -225,115 +215,24 @@ int repeatinterval[2] = { 30, 60 }; /* # of secs before flush */ static pid_t ppid; /* This is a quick and dirty hack used for spliting main/startup thread */ -typedef struct legacyOptsLL_s { - uchar *line; - struct legacyOptsLL_s *next; -} legacyOptsLL_t; -legacyOptsLL_t *pLegacyOptsLL = NULL; - /* global variables for config file state */ int iCompatibilityMode = 0; /* version we should be compatible with; 0 means sysklogd. It is the default, so if no -c<n> option is given, we make ourselvs as compatible to sysklogd as possible. */ -#define DFLT_bLogStatusMsgs 1 -static int bLogStatusMsgs = DFLT_bLogStatusMsgs; /* log rsyslog start/stop/HUP messages? */ -static int bDebugPrintTemplateList = 1;/* output template list in debug mode? */ -static int bDebugPrintCfSysLineHandlerList = 1;/* output cfsyslinehandler list in debug mode? */ -static int bDebugPrintModuleList = 1;/* output module list in debug mode? */ -static int bErrMsgToStderr = 1; /* print error messages to stderr (in addition to everything else)? */ -int bReduceRepeatMsgs; /* reduce repeated message - 0 - no, 1 - yes */ -int bAbortOnUncleanConfig = 0; /* abort run (rather than starting with partial config) if there was any issue in conf */ /* end global config file state variables */ int MarkInterval = 20 * 60; /* interval between marks in seconds - read-only after startup */ int send_to_all = 0; /* send message to all IPv4/IPv6 addresses */ static int NoFork = 0; /* don't fork - don't run in daemon mode - read-only after startup */ -static int bHaveMainQueue = 0;/* set to 1 if the main queue - in queueing mode - is available +int bHaveMainQueue = 0;/* set to 1 if the main queue - in queueing mode - is available * If the main queue is either not yet ready or not running in * queueing mode (mode DIRECT!), then this is set to 0. */ -static int uidDropPriv = 0; /* user-id to which priveleges should be dropped to (AFTER init()!) */ -static int gidDropPriv = 0; /* group-id to which priveleges should be dropped to (AFTER init()!) */ extern int errno; -static uchar *pszConfDAGFile = NULL; /* name of config DAG file, non-NULL means generate one */ /* main message queue and its configuration parameters */ qqueue_t *pMsgQueue = NULL; /* the main message queue */ -static int iMainMsgQueueSize = 10000; /* size of the main message queue above */ -static int iMainMsgQHighWtrMark = 8000; /* high water mark for disk-assisted queues */ -static int iMainMsgQLowWtrMark = 2000; /* low water mark for disk-assisted queues */ -static int iMainMsgQDiscardMark = 9800; /* begin to discard messages */ -static int iMainMsgQDiscardSeverity = 8; /* by default, discard nothing to prevent unintentional loss */ -static int iMainMsgQueueNumWorkers = 1; /* number of worker threads for the mm queue above */ -static queueType_t MainMsgQueType = QUEUETYPE_FIXED_ARRAY; /* type of the main message queue above */ -static uchar *pszMainMsgQFName = NULL; /* prefix for the main message queue file */ -static int64 iMainMsgQueMaxFileSize = 1024*1024; -static int iMainMsgQPersistUpdCnt = 0; /* persist queue info every n updates */ -static int bMainMsgQSyncQeueFiles = 0; /* sync queue files on every write? */ -static int iMainMsgQtoQShutdown = 1500; /* queue shutdown (ms) */ -static int iMainMsgQtoActShutdown = 1000; /* action shutdown (in phase 2) */ -static int iMainMsgQtoEnq = 2000; /* timeout for queue enque */ -static int iMainMsgQtoWrkShutdown = 60000; /* timeout for worker thread shutdown */ -static int iMainMsgQWrkMinMsgs = 100; /* minimum messages per worker needed to start a new one */ -static int iMainMsgQDeqSlowdown = 0; /* dequeue slowdown (simple rate limiting) */ -static int64 iMainMsgQueMaxDiskSpace = 0; /* max disk space allocated 0 ==> unlimited */ -static int64 iMainMsgQueDeqBatchSize = 32; /* dequeue batch size */ -static int bMainMsgQSaveOnShutdown = 1; /* save queue on shutdown (when DA enabled)? */ -static int iMainMsgQueueDeqtWinFromHr = 0; /* hour begin of time frame when queue is to be dequeued */ -static int iMainMsgQueueDeqtWinToHr = 25; /* hour begin of time frame when queue is to be dequeued */ - - -/* Reset config variables to default values. - * rgerhards, 2007-07-17 - */ -static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal) -{ - bLogStatusMsgs = DFLT_bLogStatusMsgs; - bDebugPrintTemplateList = 1; - bDebugPrintCfSysLineHandlerList = 1; - bDebugPrintModuleList = 1; - bReduceRepeatMsgs = 0; - bAbortOnUncleanConfig = 0; - free(pszMainMsgQFName); - pszMainMsgQFName = NULL; - iMainMsgQueueSize = 10000; - iMainMsgQHighWtrMark = 8000; - iMainMsgQLowWtrMark = 2000; - iMainMsgQDiscardMark = 9800; - iMainMsgQDiscardSeverity = 8; - iMainMsgQueMaxFileSize = 1024 * 1024; - iMainMsgQueueNumWorkers = 1; - iMainMsgQPersistUpdCnt = 0; - bMainMsgQSyncQeueFiles = 0; - iMainMsgQtoQShutdown = 1500; - iMainMsgQtoActShutdown = 1000; - iMainMsgQtoEnq = 2000; - iMainMsgQtoWrkShutdown = 60000; - iMainMsgQWrkMinMsgs = 100; - iMainMsgQDeqSlowdown = 0; - bMainMsgQSaveOnShutdown = 1; - MainMsgQueType = QUEUETYPE_FIXED_ARRAY; - iMainMsgQueMaxDiskSpace = 0; - iMainMsgQueDeqBatchSize = 32; - - return RS_RET_OK; -} - - -/* hardcoded standard templates (used for defaults) */ -static uchar template_DebugFormat[] = "\"Debug line with all properties:\nFROMHOST: '%FROMHOST%', fromhost-ip: '%fromhost-ip%', HOSTNAME: '%HOSTNAME%', PRI: %PRI%,\nsyslogtag '%syslogtag%', programname: '%programname%', APP-NAME: '%APP-NAME%', PROCID: '%PROCID%', MSGID: '%MSGID%',\nTIMESTAMP: '%TIMESTAMP%', STRUCTURED-DATA: '%STRUCTURED-DATA%',\nmsg: '%msg%'\nescaped msg: '%msg:::drop-cc%'\ninputname: %inputname% rawmsg: '%rawmsg%'\n\n\""; -static uchar template_SyslogProtocol23Format[] = "\"<%PRI%>1 %TIMESTAMP:::date-rfc3339% %HOSTNAME% %APP-NAME% %PROCID% %MSGID% %STRUCTURED-DATA% %msg%\n\""; -static uchar template_TraditionalFileFormat[] = "=RSYSLOG_TraditionalFileFormat"; -static uchar template_FileFormat[] = "=RSYSLOG_FileFormat"; -static uchar template_ForwardFormat[] = "=RSYSLOG_ForwardFormat"; -static uchar template_TraditionalForwardFormat[] = "=RSYSLOG_TraditionalForwardFormat"; -static uchar template_WallFmt[] = "\"\r\n\7Message from syslogd@%HOSTNAME% at %timegenerated% ...\r\n %syslogtag%%msg%\n\r\""; -static uchar template_StdUsrMsgFmt[] = "\" %syslogtag%%msg%\n\r\""; -static uchar template_StdDBFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-mysql%', '%timegenerated:::date-mysql%', %iut%, '%syslogtag%')\",SQL"; -static uchar template_StdPgSQLFmt[] = "\"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-pgsql%', '%timegenerated:::date-pgsql%', %iut%, '%syslogtag%')\",STDSQL"; -static uchar template_spoofadr[] = "\"%fromhost-ip%\""; -/* end templates */ /* up to the next comment, prototypes that should be removed by reordering */ @@ -457,8 +356,15 @@ void untty(void) #else { int i; + pid_t pid; if(!Debug) { + pid = getpid(); + if (setpgid(pid, pid) < 0) { + perror("setpgid"); + exit(1); + } + i = open(_PATH_TTY, O_RDWR|O_CLOEXEC); if (i >= 0) { # if !defined(__hpux) @@ -484,7 +390,7 @@ void untty(void) */ rsRetVal parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int flags, flowControl_t flowCtlType, - prop_t *pInputName, struct syslogTime *stTime, time_t ttGenTime) + prop_t *pInputName, struct syslogTime *stTime, time_t ttGenTime, ruleset_t *pRuleset) { prop_t *pProp = NULL; msg_t *pMsg; @@ -500,6 +406,7 @@ parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int fla MsgSetInputName(pMsg, pInputName); MsgSetRawMsg(pMsg, (char*)msg, len); MsgSetFlowControlType(pMsg, flowCtlType); + MsgSetRuleset(pMsg, pRuleset); pMsg->msgFlags = flags | NEEDS_PARSING; MsgSetRcvFromStr(pMsg, hname, ustrlen(hname), &pProp); @@ -541,7 +448,8 @@ logmsgInternal(int iErr, int pri, uchar *msg, int flags) MsgSetRawMsgWOSize(pMsg, (char*)msg); MsgSetHOSTNAME(pMsg, glbl.GetLocalHostName(), ustrlen(glbl.GetLocalHostName())); MsgSetRcvFrom(pMsg, glbl.GetLocalHostNameProp()); - MsgSetRcvFromIP(pMsg, pLocalHostIP); +dbgprintf("ZZZZ: pLocalHostIPIF used!\n"); + MsgSetRcvFromIP(pMsg, glbl.GetLocalHostIP()); MsgSetMSGoffs(pMsg, 0); /* check if we have an error code associated and, if so, * adjust the tag. -- rgerhards, 2008-06-27 @@ -566,7 +474,7 @@ logmsgInternal(int iErr, int pri, uchar *msg, int flags) * permits us to process unmodified config files which otherwise contain a * supressor statement. */ - if(((Debug == DEBUG_FULL || NoFork) && bErrMsgToStderr) || iConfigVerify) { + if(((Debug == DEBUG_FULL || NoFork) && ourConf->globals.bErrMsgToStderr) || iConfigVerify) { if(LOG_PRI(pri) == LOG_ERR) fprintf(stderr, "rsyslogd: %s\n", msg); } @@ -722,11 +630,19 @@ submitMsg(msg_t *pMsg) ISOBJ_TYPE_assert(pMsg, msg); pRuleset = MsgGetRuleset(pMsg); - pQueue = (pRuleset == NULL) ? pMsgQueue : ruleset.GetRulesetQueue(pRuleset); + + /* if a plugin logs a message during shutdown, the queue may no longer exist */ + if(pQueue == NULL) { + DBGPRINTF("submitMsg() could not submit message - " + "queue does (no longer?) exist - ignored\n"); + FINALIZE; + } + MsgPrepareEnqueue(pMsg); qqueueEnqObj(pQueue, pMsg->flowCtlType, (void*) pMsg); +finalize_it: RETiRet; } @@ -747,12 +663,20 @@ multiSubmitMsg(multi_submit_t *pMultiSub) if(pMultiSub->nElem == 0) FINALIZE; + pRuleset = MsgGetRuleset(pMultiSub->ppMsgs[0]); + pQueue = (pRuleset == NULL) ? pMsgQueue : ruleset.GetRulesetQueue(pRuleset); + + /* if a plugin logs a message during shutdown, the queue may no longer exist */ + if(pQueue == NULL) { + DBGPRINTF("multiSubmitMsg() could not submit message - " + "queue does (no longer?) exist - ignored\n"); + FINALIZE; + } + for(i = 0 ; i < pMultiSub->nElem ; ++i) { MsgPrepareEnqueue(pMultiSub->ppMsgs[i]); } - pRuleset = MsgGetRuleset(pMultiSub->ppMsgs[0]); - pQueue = (pRuleset == NULL) ? pMsgQueue : ruleset.GetRulesetQueue(pRuleset); iRet = pQueue->MultiEnq(pQueue, pMultiSub); pMultiSub->nElem = 0; @@ -788,7 +712,7 @@ DEFFUNC_llExecFunc(flushRptdMsgsActions) assert(pAction != NULL); BEGINfunc - LockObj(pAction); + d_pthread_mutex_lock(&pAction->mutAction); /* TODO: time() performance: the call below could be moved to * the beginn of the llExec(). This makes it slightly less correct, but * in an acceptable way. -- rgerhards, 2008-09-16 @@ -800,7 +724,7 @@ DEFFUNC_llExecFunc(flushRptdMsgsActions) actionWriteToAction(pAction); BACKOFF(pAction); } - UnlockObj(pAction); + d_pthread_mutex_unlock(&pAction->mutAction); ENDfunc return RS_RET_OK; /* we ignore errors, we can not do anything either way */ @@ -812,7 +736,7 @@ DEFFUNC_llExecFunc(flushRptdMsgsActions) static void doFlushRptdMsgs(void) { - ruleset.IterateAllActions(flushRptdMsgsActions, NULL); + ruleset.IterateAllActions(runConf, flushRptdMsgsActions, NULL); } @@ -849,132 +773,6 @@ static void debug_switch() } -void legacyOptsEnq(uchar *line) -{ - legacyOptsLL_t *pNew; - - pNew = MALLOC(sizeof(legacyOptsLL_t)); - if(line == NULL) - pNew->line = NULL; - else - pNew->line = (uchar *) strdup((char *) line); - pNew->next = NULL; - - if(pLegacyOptsLL == NULL) - pLegacyOptsLL = pNew; - else { - legacyOptsLL_t *pThis = pLegacyOptsLL; - - while(pThis->next != NULL) - pThis = pThis->next; - pThis->next = pNew; - } -} - - -void legacyOptsFree(void) -{ - legacyOptsLL_t *pThis = pLegacyOptsLL, *pNext; - - while(pThis != NULL) { - if(pThis->line != NULL) - free(pThis->line); - pNext = pThis->next; - free(pThis); - pThis = pNext; - } -} - - -void legacyOptsHook(void) -{ - legacyOptsLL_t *pThis = pLegacyOptsLL; - - while(pThis != NULL) { - if(pThis->line != NULL) { - errno = 0; - errmsg.LogError(0, NO_ERRCODE, "Warning: backward compatibility layer added to following " - "directive to rsyslog.conf: %s", pThis->line); - conf.cfsysline(pThis->line); - } - pThis = pThis->next; - } -} - - -void legacyOptsParseTCP(char ch, char *arg) -{ - register int i; - register char *pArg = arg; - static char conflict = '\0'; - - if((conflict == 'g' && ch == 't') || (conflict == 't' && ch == 'g')) { - fprintf(stderr, "rsyslogd: If you want to use both -g and -t, use directives instead, -%c ignored.\n", ch); - return; - } else - conflict = ch; - - /* extract port */ - i = 0; - while(isdigit((int) *pArg)) - i = i * 10 + *pArg++ - '0'; - - /* number of sessions */ - if(*pArg == '\0' || *pArg == ',') { - if(ch == 't') - legacyOptsEnq((uchar *) "ModLoad imtcp"); - else if(ch == 'g') - legacyOptsEnq((uchar *) "ModLoad imgssapi"); - - if(i >= 0 && i <= 65535) { - uchar line[30]; - - if(ch == 't') { - snprintf((char *) line, sizeof(line), "InputTCPServerRun %d", i); - } else if(ch == 'g') { - snprintf((char *) line, sizeof(line), "InputGSSServerRun %d", i); - } - legacyOptsEnq(line); - } else { - if(ch == 't') { - fprintf(stderr, "rsyslogd: Invalid TCP listen port %d - changed to 514.\n", i); - legacyOptsEnq((uchar *) "InputTCPServerRun 514"); - } else if(ch == 'g') { - fprintf(stderr, "rsyslogd: Invalid GSS listen port %d - changed to 514.\n", i); - legacyOptsEnq((uchar *) "InputGSSServerRun 514"); - } - } - - if(*pArg == ',') { - ++pArg; - while(isspace((int) *pArg)) - ++pArg; - i = 0; - while(isdigit((int) *pArg)) { - i = i * 10 + *pArg++ - '0'; - } - if(i > 0) { - uchar line[30]; - - snprintf((char *) line, sizeof(line), "InputTCPMaxSessions %d", i); - legacyOptsEnq(line); - } else { - if(ch == 't') { - fprintf(stderr, "rsyslogd: TCP session max configured " - "to %d [-t %s] - changing to 1.\n", i, arg); - legacyOptsEnq((uchar *) "InputTCPMaxSessions 1"); - } else if (ch == 'g') { - fprintf(stderr, "rsyslogd: GSS session max configured " - "to %d [-g %s] - changing to 1.\n", i, arg); - legacyOptsEnq((uchar *) "InputTCPMaxSessions 1"); - } - } - } - } else - fprintf(stderr, "rsyslogd: Invalid -t %s command line option.\n", arg); -} - - /* doDie() is a signal handler. If called, it sets the bFinished variable * to indicate the program should terminate. However, it does not terminate * it itself, because that causes issues with multi-threading. The actual @@ -1012,9 +810,7 @@ static void doDie(int sig) static void freeAllDynMemForTermination(void) { - free(pszMainMsgQFName); - free(pModDir); - free(pszConfDAGFile); + free(ourConf->globals.pszConfDAGFile); } @@ -1023,7 +819,7 @@ freeAllDynMemForTermination(void) static inline void destructAllActions(void) { - ruleset.DestructAllActions(); + ruleset.DestructAllActions(runConf); bHaveMainQueue = 0; // flag that internal messages need to be temporarily stored } @@ -1061,7 +857,7 @@ die(int sig) thrdTerminateAll(); /* and THEN send the termination log message (see long comment above) */ - if(sig && bLogStatusMsgs) { + if(sig && runConf->globals.bLogStatusMsgs) { (void) snprintf(buf, sizeof(buf) / sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"]" " exiting on signal %d.", @@ -1093,7 +889,7 @@ die(int sig) * ourselfs, this makes finding memory leaks a lot * easier. */ - tplDeleteAll(); + tplDeleteAll(runConf); /* de-init some modules */ modExitIminternal(); @@ -1105,13 +901,9 @@ die(int sig) */ unregCfSysLineHdlrs(); - legacyOptsFree(); - /* destruct our global properties */ if(pInternalInputName != NULL) prop.Destruct(&pInternalInputName); - if(pLocalHostIP != NULL) - prop.Destruct(&pLocalHostIP); /* terminate the remaining classes */ GlobalClassExit(); @@ -1144,110 +936,7 @@ static void doexit() exit(0); /* "good" exit, only during child-creation */ } - -/* set the maximum message size */ -static rsRetVal setMaxMsgSize(void __attribute__((unused)) *pVal, long iNewVal) -{ - return glbl.SetMaxLine(iNewVal); -} - - -/* set the action resume interval */ -static rsRetVal setActionResumeInterval(void __attribute__((unused)) *pVal, int iNewVal) -{ - return actionSetGlobalResumeInterval(iNewVal); -} - - -/* set the processes max number ob files (upon configuration request) - * 2009-04-14 rgerhards - */ -static rsRetVal setMaxFiles(void __attribute__((unused)) *pVal, int iFiles) -{ - struct rlimit maxFiles; - char errStr[1024]; - DEFiRet; - - maxFiles.rlim_cur = iFiles; - maxFiles.rlim_max = iFiles; - - if(setrlimit(RLIMIT_NOFILE, &maxFiles) < 0) { - /* NOTE: under valgrind, we seem to be unable to extend the size! */ - rs_strerror_r(errno, errStr, sizeof(errStr)); - errmsg.LogError(0, RS_RET_ERR_RLIM_NOFILE, "could not set process file limit to %d: %s [kernel max %ld]", - iFiles, errStr, (long) maxFiles.rlim_max); - ABORT_FINALIZE(RS_RET_ERR_RLIM_NOFILE); - } -#ifdef USE_UNLIMITED_SELECT - glbl.SetFdSetSize(howmany(iFiles, __NFDBITS) * sizeof (fd_mask)); -#endif - DBGPRINTF("Max number of files set to %d [kernel max %ld].\n", iFiles, (long) maxFiles.rlim_max); - -finalize_it: - RETiRet; -} - - -/* set the processes umask (upon configuration request) */ -static rsRetVal setUmask(void __attribute__((unused)) *pVal, int iUmask) -{ - umask(iUmask); - DBGPRINTF("umask set to 0%3.3o.\n", iUmask); - - return RS_RET_OK; -} - - -/* drop to specified group - * if something goes wrong, the function never returns - * Note that such an abort can cause damage to on-disk structures, so we should - * re-design the "interface" in the long term. -- rgerhards, 2008-11-26 - */ -static void doDropPrivGid(int iGid) -{ - int res; - uchar szBuf[1024]; - - res = setgroups(0, NULL); /* remove all supplementary group IDs */ - if(res) { - perror("could not remove supplemental group IDs"); - exit(1); - } - DBGPRINTF("setgroups(0, NULL): %d\n", res); - res = setgid(iGid); - if(res) { - /* if we can not set the userid, this is fatal, so let's unconditionally abort */ - perror("could not set requested group id"); - exit(1); - } - DBGPRINTF("setgid(%d): %d\n", iGid, res); - snprintf((char*)szBuf, sizeof(szBuf)/sizeof(uchar), "rsyslogd's groupid changed to %d", iGid); - logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, szBuf, 0); -} - - -/* drop to specified user - * if something goes wrong, the function never returns - * Note that such an abort can cause damage to on-disk structures, so we should - * re-design the "interface" in the long term. -- rgerhards, 2008-11-19 - */ -static void doDropPrivUid(int iUid) -{ - int res; - uchar szBuf[1024]; - - res = setuid(iUid); - if(res) { - /* if we can not set the userid, this is fatal, so let's unconditionally abort */ - perror("could not set requested userid"); - exit(1); - } - DBGPRINTF("setuid(%d): %d\n", iUid, res); - snprintf((char*)szBuf, sizeof(szBuf)/sizeof(uchar), "rsyslogd's userid changed to %d", iUid); - logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, szBuf, 0); -} - - +#if 0 /* TODO: re-enable, currently not used */ /* helper to generateConfigDAG, to print out all actions via * the llExecFunc() facility. * rgerhards, 2007-08-02 @@ -1432,105 +1121,7 @@ generateConfigDAG(uchar *pszDAGFile) finalize_it: RETiRet; } - - -/* print debug information as part of init(). This pretty much - * outputs the whole config of rsyslogd. I've moved this code - * out of init() to clean it somewhat up. - * rgerhards, 2007-07-31 - */ -static void dbgPrintInitInfo(void) -{ - ruleset.DebugPrintAll(); - DBGPRINTF("\n"); - if(bDebugPrintTemplateList) - tplPrintList(); - if(bDebugPrintModuleList) - module.PrintList(); - ochPrintList(); - - if(bDebugPrintCfSysLineHandlerList) - dbgPrintCfSysLineHandlers(); - - DBGPRINTF("Messages with malicious PTR DNS Records are %sdropped.\n", - glbl.GetDropMalPTRMsgs() ? "" : "not "); - - DBGPRINTF("Main queue size %d messages.\n", iMainMsgQueueSize); - DBGPRINTF("Main queue worker threads: %d, wThread shutdown: %d, Perists every %d updates.\n", - iMainMsgQueueNumWorkers, iMainMsgQtoWrkShutdown, iMainMsgQPersistUpdCnt); - DBGPRINTF("Main queue timeouts: shutdown: %d, action completion shutdown: %d, enq: %d\n", - iMainMsgQtoQShutdown, iMainMsgQtoActShutdown, iMainMsgQtoEnq); - DBGPRINTF("Main queue watermarks: high: %d, low: %d, discard: %d, discard-severity: %d\n", - iMainMsgQHighWtrMark, iMainMsgQLowWtrMark, iMainMsgQDiscardMark, iMainMsgQDiscardSeverity); - DBGPRINTF("Main queue save on shutdown %d, max disk space allowed %lld\n", - bMainMsgQSaveOnShutdown, iMainMsgQueMaxDiskSpace); - /* TODO: add - iActionRetryCount = 0; - iActionRetryInterval = 30000; - static int iMainMsgQtoWrkMinMsgs = 100; - static int iMainMsgQbSaveOnShutdown = 1; - iMainMsgQueMaxDiskSpace = 0; - setQPROP(qqueueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", 100); - setQPROP(qqueueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", 1); - */ - DBGPRINTF("Work Directory: '%s'.\n", glbl.GetWorkDir()); -} - - -/* Actually run the input modules. This happens after privileges are dropped, - * if that is requested. - */ -static rsRetVal -runInputModules(void) -{ - modInfo_t *pMod; - int bNeedsCancel; - - BEGINfunc - /* loop through all modules and activate them (brr...) */ - pMod = module.GetNxtType(NULL, eMOD_IN); - while(pMod != NULL) { - if(pMod->mod.im.bCanRun) { - DBGPRINTF("trying to start input module '%s'\n", pMod->pszName); - /* activate here */ - bNeedsCancel = (pMod->isCompatibleWithFeature(sFEATURENonCancelInputTermination) == RS_RET_OK) ? - 0 : 1; - thrdCreate(pMod->mod.im.runInput, pMod->mod.im.afterRun, bNeedsCancel); - } - pMod = module.GetNxtType(pMod, eMOD_IN); - } - - ENDfunc - return RS_RET_OK; /* intentional: we do not care about module errors */ -} - - -/* Start the input modules. This function will probably undergo big changes - * while we implement the input module interface. For now, it does the most - * important thing to get at least my poor initial input modules up and - * running. Almost no config option is taken. - * rgerhards, 2007-12-14 - */ -static rsRetVal -startInputModules(void) -{ - DEFiRet; - modInfo_t *pMod; - - /* loop through all modules and activate them (brr...) */ - pMod = module.GetNxtType(NULL, eMOD_IN); - while(pMod != NULL) { - iRet = pMod->mod.im.willRun(); - pMod->mod.im.bCanRun = (iRet == RS_RET_OK); - if(!pMod->mod.im.bCanRun) { - DBGPRINTF("module %lx will not run, iRet %d\n", (unsigned long) pMod, iRet); - } - pMod = module.GetNxtType(pMod, eMOD_IN); - } - - ENDfunc - return RS_RET_OK; /* intentional: we do not care about module errors */ -} +#endif /* create a main message queue, now also used for ruleset queues. This function @@ -1543,12 +1134,12 @@ rsRetVal createMainQueue(qqueue_t **ppQueue, uchar *pszQueueName) DEFiRet; /* switch the message object to threaded operation, if necessary */ - if(MainMsgQueType == QUEUETYPE_DIRECT || iMainMsgQueueNumWorkers > 1) { + if(ourConf->globals.mainQ.MainMsgQueType == QUEUETYPE_DIRECT || ourConf->globals.mainQ.iMainMsgQueueNumWorkers > 1) { MsgEnableThreadSafety(); } /* create message queue */ - CHKiRet_Hdlr(qqueueConstruct(ppQueue, MainMsgQueType, iMainMsgQueueNumWorkers, iMainMsgQueueSize, msgConsumer)) { + CHKiRet_Hdlr(qqueueConstruct(ppQueue, ourConf->globals.mainQ.MainMsgQueType, ourConf->globals.mainQ.iMainMsgQueueNumWorkers, ourConf->globals.mainQ.iMainMsgQueueSize, msgConsumer)) { /* no queue is fatal, we need to give up in that case... */ errmsg.LogError(0, iRet, "could not create (ruleset) main message queue"); \ } @@ -1565,25 +1156,25 @@ rsRetVal createMainQueue(qqueue_t **ppQueue, uchar *pszQueueName) errmsg.LogError(0, NO_ERRCODE, "Invalid " #directive ", error %d. Ignored, running with default setting", iRet); \ } - setQPROP(qqueueSetMaxFileSize, "$MainMsgQueueFileSize", iMainMsgQueMaxFileSize); - setQPROP(qqueueSetsizeOnDiskMax, "$MainMsgQueueMaxDiskSpace", iMainMsgQueMaxDiskSpace); - setQPROP(qqueueSetiDeqBatchSize, "$MainMsgQueueDequeueBatchSize", iMainMsgQueDeqBatchSize); - setQPROPstr(qqueueSetFilePrefix, "$MainMsgQueueFileName", pszMainMsgQFName); - setQPROP(qqueueSetiPersistUpdCnt, "$MainMsgQueueCheckpointInterval", iMainMsgQPersistUpdCnt); - setQPROP(qqueueSetbSyncQueueFiles, "$MainMsgQueueSyncQueueFiles", bMainMsgQSyncQeueFiles); - setQPROP(qqueueSettoQShutdown, "$MainMsgQueueTimeoutShutdown", iMainMsgQtoQShutdown ); - setQPROP(qqueueSettoActShutdown, "$MainMsgQueueTimeoutActionCompletion", iMainMsgQtoActShutdown); - setQPROP(qqueueSettoWrkShutdown, "$MainMsgQueueWorkerTimeoutThreadShutdown", iMainMsgQtoWrkShutdown); - setQPROP(qqueueSettoEnq, "$MainMsgQueueTimeoutEnqueue", iMainMsgQtoEnq); - setQPROP(qqueueSetiHighWtrMrk, "$MainMsgQueueHighWaterMark", iMainMsgQHighWtrMark); - setQPROP(qqueueSetiLowWtrMrk, "$MainMsgQueueLowWaterMark", iMainMsgQLowWtrMark); - setQPROP(qqueueSetiDiscardMrk, "$MainMsgQueueDiscardMark", iMainMsgQDiscardMark); - setQPROP(qqueueSetiDiscardSeverity, "$MainMsgQueueDiscardSeverity", iMainMsgQDiscardSeverity); - setQPROP(qqueueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", iMainMsgQWrkMinMsgs); - setQPROP(qqueueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", bMainMsgQSaveOnShutdown); - setQPROP(qqueueSetiDeqSlowdown, "$MainMsgQueueDequeueSlowdown", iMainMsgQDeqSlowdown); - setQPROP(qqueueSetiDeqtWinFromHr, "$MainMsgQueueDequeueTimeBegin", iMainMsgQueueDeqtWinFromHr); - setQPROP(qqueueSetiDeqtWinToHr, "$MainMsgQueueDequeueTimeEnd", iMainMsgQueueDeqtWinToHr); + setQPROP(qqueueSetMaxFileSize, "$MainMsgQueueFileSize", ourConf->globals.mainQ.iMainMsgQueMaxFileSize); + setQPROP(qqueueSetsizeOnDiskMax, "$MainMsgQueueMaxDiskSpace", ourConf->globals.mainQ.iMainMsgQueMaxDiskSpace); + setQPROP(qqueueSetiDeqBatchSize, "$MainMsgQueueDequeueBatchSize", ourConf->globals.mainQ.iMainMsgQueDeqBatchSize); + setQPROPstr(qqueueSetFilePrefix, "$MainMsgQueueFileName", ourConf->globals.mainQ.pszMainMsgQFName); + setQPROP(qqueueSetiPersistUpdCnt, "$MainMsgQueueCheckpointInterval", ourConf->globals.mainQ.iMainMsgQPersistUpdCnt); + setQPROP(qqueueSetbSyncQueueFiles, "$MainMsgQueueSyncQueueFiles", ourConf->globals.mainQ.bMainMsgQSyncQeueFiles); + setQPROP(qqueueSettoQShutdown, "$MainMsgQueueTimeoutShutdown", ourConf->globals.mainQ.iMainMsgQtoQShutdown ); + setQPROP(qqueueSettoActShutdown, "$MainMsgQueueTimeoutActionCompletion", ourConf->globals.mainQ.iMainMsgQtoActShutdown); + setQPROP(qqueueSettoWrkShutdown, "$MainMsgQueueWorkerTimeoutThreadShutdown", ourConf->globals.mainQ.iMainMsgQtoWrkShutdown); + setQPROP(qqueueSettoEnq, "$MainMsgQueueTimeoutEnqueue", ourConf->globals.mainQ.iMainMsgQtoEnq); + setQPROP(qqueueSetiHighWtrMrk, "$MainMsgQueueHighWaterMark", ourConf->globals.mainQ.iMainMsgQHighWtrMark); + setQPROP(qqueueSetiLowWtrMrk, "$MainMsgQueueLowWaterMark", ourConf->globals.mainQ.iMainMsgQLowWtrMark); + setQPROP(qqueueSetiDiscardMrk, "$MainMsgQueueDiscardMark", ourConf->globals.mainQ.iMainMsgQDiscardMark); + setQPROP(qqueueSetiDiscardSeverity, "$MainMsgQueueDiscardSeverity", ourConf->globals.mainQ.iMainMsgQDiscardSeverity); + setQPROP(qqueueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", ourConf->globals.mainQ.iMainMsgQWrkMinMsgs); + setQPROP(qqueueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", ourConf->globals.mainQ.bMainMsgQSaveOnShutdown); + setQPROP(qqueueSetiDeqSlowdown, "$MainMsgQueueDequeueSlowdown", ourConf->globals.mainQ.iMainMsgQDeqSlowdown); + setQPROP(qqueueSetiDeqtWinFromHr, "$MainMsgQueueDequeueTimeBegin", ourConf->globals.mainQ.iMainMsgQueueDeqtWinFromHr); + setQPROP(qqueueSetiDeqtWinToHr, "$MainMsgQueueDequeueTimeEnd", ourConf->globals.mainQ.iMainMsgQueueDeqtWinToHr); # undef setQPROP # undef setQPROPstr @@ -1604,142 +1195,22 @@ rsRetVal createMainQueue(qqueue_t **ppQueue, uchar *pszQueueName) static rsRetVal init(void) { - rsRetVal localRet; - int iNbrActions; - int bHadConfigErr = 0; - ruleset_t *pRuleset; - char cbuf[BUFSIZ]; char bufStartUpMsg[512]; struct sigaction sigAct; DEFiRet; - DBGPRINTF("rsyslog %s - called init()\n", VERSION); - - /* construct the default ruleset */ - ruleset.Construct(&pRuleset); - ruleset.SetName(pRuleset, UCHAR_CONSTANT("RSYSLOG_DefaultRuleset")); - ruleset.ConstructFinalize(pRuleset); - - /* open the configuration file */ - localRet = conf.processConfFile(ConfFile); - CHKiRet(conf.GetNbrActActions(&iNbrActions)); - - if(localRet != RS_RET_OK) { - errmsg.LogError(0, localRet, "CONFIG ERROR: could not interpret master config file '%s'.", ConfFile); - bHadConfigErr = 1; - } else if(iNbrActions == 0) { - errmsg.LogError(0, RS_RET_NO_ACTIONS, "CONFIG ERROR: there are no active actions configured. Inputs will " - "run, but no output whatsoever is created."); - bHadConfigErr = 1; - } - - if((localRet != RS_RET_OK && localRet != RS_RET_NONFATAL_CONFIG_ERR) || iNbrActions == 0) { - /* rgerhards: this code is executed to set defaults when the - * config file could not be opened. We might think about - * abandoning the run in this case - but this, too, is not - * very clever... So we stick with what we have. - * We ignore any errors while doing this - we would be lost anyhow... - */ - errmsg.LogError(0, NO_ERRCODE, "EMERGENCY CONFIGURATION ACTIVATED - fix rsyslog config file!"); - - /* note: we previously used _POSIY_TTY_NAME_MAX+1, but this turned out to be - * too low on linux... :-S -- rgerhards, 2008-07-28 - */ - char szTTYNameBuf[128]; - rule_t *pRule = NULL; /* initialization to NULL is *vitally* important! */ - conf.cfline(UCHAR_CONSTANT("*.ERR\t" _PATH_CONSOLE), &pRule); - conf.cfline(UCHAR_CONSTANT("syslog.*\t" _PATH_CONSOLE), &pRule); - conf.cfline(UCHAR_CONSTANT("*.PANIC\t*"), &pRule); - conf.cfline(UCHAR_CONSTANT("syslog.*\troot"), &pRule); - if(ttyname_r(0, szTTYNameBuf, sizeof(szTTYNameBuf)) == 0) { - snprintf(cbuf,sizeof(cbuf), "*.*\t%s", szTTYNameBuf); - conf.cfline((uchar*)cbuf, &pRule); - } else { - DBGPRINTF("error %d obtaining controlling terminal, not using that emergency rule\n", errno); - } - ruleset.AddRule(ruleset.GetCurrent(), &pRule); - } - - legacyOptsHook(); - - /* some checks */ - if(iMainMsgQueueNumWorkers < 1) { - errmsg.LogError(0, NO_ERRCODE, "$MainMsgQueueNumWorkers must be at least 1! Set to 1.\n"); - iMainMsgQueueNumWorkers = 1; - } - - if(MainMsgQueType == QUEUETYPE_DISK) { - errno = 0; /* for logerror! */ - if(glbl.GetWorkDir() == NULL) { - errmsg.LogError(0, NO_ERRCODE, "No $WorkDirectory specified - can not run main message queue in 'disk' mode. " - "Using 'FixedArray' instead.\n"); - MainMsgQueType = QUEUETYPE_FIXED_ARRAY; - } - if(pszMainMsgQFName == NULL) { - errmsg.LogError(0, NO_ERRCODE, "No $MainMsgQueueFileName specified - can not run main message queue in " - "'disk' mode. Using 'FixedArray' instead.\n"); - MainMsgQueType = QUEUETYPE_FIXED_ARRAY; - } - } - - /* check if we need to generate a config DAG and, if so, do that */ - if(pszConfDAGFile != NULL) - generateConfigDAG(pszConfDAGFile); - - /* we are done checking the config - now validate if we should actually run or not. - * If not, terminate. -- rgerhards, 2008-07-25 - */ - if(iConfigVerify) { - if(bHadConfigErr) { - /* a bit dirty, but useful... */ - exit(1); - } - ABORT_FINALIZE(RS_RET_VALIDATION_RUN); - } - - if(bAbortOnUncleanConfig && bHadConfigErr) { - fprintf(stderr, "rsyslogd: $AbortOnUncleanConfig is set, and config is not clean.\n" - "Check error log for details, fix errors and restart. As a last\n" - "resort, you may want to remove $AbortOnUncleanConfig to permit a\n" - "startup with a dirty config.\n"); - exit(2); - } - - /* create message queue */ - CHKiRet_Hdlr(createMainQueue(&pMsgQueue, UCHAR_CONSTANT("main Q"))) { - /* no queue is fatal, we need to give up in that case... */ - fprintf(stderr, "fatal error %d: could not create message queue - rsyslogd can not run!\n", iRet); - exit(1); - } - - bHaveMainQueue = (MainMsgQueType == QUEUETYPE_DIRECT) ? 0 : 1; - DBGPRINTF("Main processing queue is initialized and running\n"); - - /* the output part and the queue is now ready to run. So it is a good time - * to initialize the inputs. Please note that the net code above should be - * shuffled to down here once we have everything in input modules. - * rgerhards, 2007-12-14 - * NOTE: as of 2009-06-29, the input modules are initialized, but not yet run. - * Keep in mind. though, that the outputs already run if the queue was - * persisted to disk. -- rgerhards - */ - startInputModules(); - - if(Debug) { - dbgPrintInitInfo(); - } - memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = sighup_handler; sigaction(SIGHUP, &sigAct, NULL); + CHKiRet(rsconf.Activate(ourConf)); DBGPRINTF(" started.\n"); /* we now generate the startup message. It now includes everything to * identify this instance. -- rgerhards, 2005-08-17 */ - if(bLogStatusMsgs) { + if(ourConf->globals.bLogStatusMsgs) { snprintf(bufStartUpMsg, sizeof(bufStartUpMsg)/sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"] start", @@ -1752,100 +1223,6 @@ finalize_it: } -/* Switch the default ruleset (that, what servcies bind to if nothing specific - * is specified). - * rgerhards, 2009-06-12 - */ -static rsRetVal -setDefaultRuleset(void __attribute__((unused)) *pVal, uchar *pszName) -{ - DEFiRet; - - CHKiRet(ruleset.SetDefaultRuleset(pszName)); - -finalize_it: - free(pszName); /* no longer needed */ - RETiRet; -} - - - -/* Put the rsyslog main thread to sleep for n seconds. This was introduced as - * a quick and dirty workaround for a privilege drop race in regard to listener - * startup, which itself was a result of the not-yet-done proper coding of - * privilege drop code (quite some effort). It may be useful for other occasions, too. - * is specified). - * rgerhards, 2009-06-12 - */ -static rsRetVal -putToSleep(void __attribute__((unused)) *pVal, int iNewVal) -{ - DEFiRet; - DBGPRINTF("rsyslog main thread put to sleep via $sleep %d directive...\n", iNewVal); - srSleep(iNewVal, 0); - DBGPRINTF("rsyslog main thread continues after $sleep %d\n", iNewVal); - RETiRet; -} - - -/* Switch to either an already existing rule set or start a new one. The - * named rule set becomes the new "current" rule set (what means that new - * actions are added to it). - * rgerhards, 2009-06-12 - */ -static rsRetVal -setCurrRuleset(void __attribute__((unused)) *pVal, uchar *pszName) -{ - ruleset_t *pRuleset; - rsRetVal localRet; - DEFiRet; - - localRet = ruleset.SetCurrRuleset(pszName); - - if(localRet == RS_RET_NOT_FOUND) { - DBGPRINTF("begin new current rule set '%s'\n", pszName); - CHKiRet(ruleset.Construct(&pRuleset)); - CHKiRet(ruleset.SetName(pRuleset, pszName)); - CHKiRet(ruleset.ConstructFinalize(pRuleset)); - } else { - ABORT_FINALIZE(localRet); - } - -finalize_it: - free(pszName); /* no longer needed */ - RETiRet; -} - - -/* set the main message queue mode - * rgerhards, 2008-01-03 - */ -static rsRetVal setMainMsgQueType(void __attribute__((unused)) *pVal, uchar *pszType) -{ - DEFiRet; - - if (!strcasecmp((char *) pszType, "fixedarray")) { - MainMsgQueType = QUEUETYPE_FIXED_ARRAY; - DBGPRINTF("main message queue type set to FIXED_ARRAY\n"); - } else if (!strcasecmp((char *) pszType, "linkedlist")) { - MainMsgQueType = QUEUETYPE_LINKEDLIST; - DBGPRINTF("main message queue type set to LINKEDLIST\n"); - } else if (!strcasecmp((char *) pszType, "disk")) { - MainMsgQueType = QUEUETYPE_DISK; - DBGPRINTF("main message queue type set to DISK\n"); - } else if (!strcasecmp((char *) pszType, "direct")) { - MainMsgQueType = QUEUETYPE_DIRECT; - DBGPRINTF("main message queue type set to DIRECT (no queueing at all)\n"); - } else { - errmsg.LogError(0, RS_RET_INVALID_PARAMS, "unknown mainmessagequeuetype parameter: %s", (char *) pszType); - iRet = RS_RET_INVALID_PARAMS; - } - free(pszType); /* no longer needed */ - - RETiRet; -} - - /* * The following function is resposible for handling a SIGHUP signal. Since * we are now doing mallocs/free as part of init we had better not being @@ -1912,7 +1289,7 @@ doHUP(void) { char buf[512]; - if(bLogStatusMsgs) { + if(ourConf->globals.bLogStatusMsgs) { snprintf(buf, sizeof(buf) / sizeof(char), " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"] rsyslogd was HUPed", @@ -1922,7 +1299,7 @@ doHUP(void) } queryLocalHostname(); /* re-read our name */ - ruleset.IterateAllActions(doHUPActions, NULL); + ruleset.IterateAllActions(ourConf, doHUPActions, NULL); } @@ -1952,7 +1329,7 @@ mainloop(void) * powertop, for example). In that case, we primarily wait for a signal, * but a once-a-day wakeup should be quite acceptable. -- rgerhards, 2008-06-09 */ - tvSelectTimeout.tv_sec = (bReduceRepeatMsgs == 1) ? TIMERINTVL : 86400 /*1 day*/; + tvSelectTimeout.tv_sec = (runConf->globals.bReduceRepeatMsgs == 1) ? TIMERINTVL : 86400 /*1 day*/; //tvSelectTimeout.tv_sec = TIMERINTVL; /* TODO: change this back to the above code when we have a better solution for apc */ tvSelectTimeout.tv_usec = 0; select(1, NULL, NULL, NULL, &tvSelectTimeout); @@ -1980,7 +1357,7 @@ mainloop(void) * for the time being, I think the remaining risk can be accepted. * rgerhards, 2008-01-10 */ - if(bReduceRepeatMsgs == 1) + if(runConf->globals.bReduceRepeatMsgs == 1) doFlushRptdMsgs(); if(bHadHUP) { @@ -1993,119 +1370,6 @@ mainloop(void) ENDfunc } - -/* load build-in modules - * very first version begun on 2007-07-23 by rgerhards - */ -static rsRetVal loadBuildInModules(void) -{ - DEFiRet; - - if((iRet = module.doModInit(modInitFile, UCHAR_CONSTANT("builtin-file"), NULL)) != RS_RET_OK) { - RETiRet; - } - if((iRet = module.doModInit(modInitPipe, UCHAR_CONSTANT("builtin-pipe"), NULL)) != RS_RET_OK) { - RETiRet; - } -#ifdef SYSLOG_INET - if((iRet = module.doModInit(modInitFwd, UCHAR_CONSTANT("builtin-fwd"), NULL)) != RS_RET_OK) { - RETiRet; - } -#endif - if((iRet = module.doModInit(modInitShell, UCHAR_CONSTANT("builtin-shell"), NULL)) != RS_RET_OK) { - RETiRet; - } - if((iRet = module.doModInit(modInitDiscard, UCHAR_CONSTANT("builtin-discard"), NULL)) != RS_RET_OK) { - RETiRet; - } - - /* dirty, but this must be for the time being: the usrmsg module must always be - * loaded as last module. This is because it processes any type of action selector. - * If we load it before other modules, these others will never have a chance of - * working with the config file. We may change that implementation so that a user name - * must start with an alnum, that would definitely help (but would it break backwards - * compatibility?). * rgerhards, 2007-07-23 - * User names now must begin with: - * [a-zA-Z0-9_.] - */ - CHKiRet(module.doModInit(modInitUsrMsg, (uchar*) "builtin-usrmsg", NULL)); - - /* load build-in parser modules */ - CHKiRet(module.doModInit(modInitpmrfc5424, UCHAR_CONSTANT("builtin-pmrfc5424"), NULL)); - CHKiRet(module.doModInit(modInitpmrfc3164, UCHAR_CONSTANT("builtin-pmrfc3164"), NULL)); - - /* and set default parser modules (order is *very* important, legacy (3164) parse needs to go last! */ - CHKiRet(parser.AddDfltParser(UCHAR_CONSTANT("rsyslog.rfc5424"))); - CHKiRet(parser.AddDfltParser(UCHAR_CONSTANT("rsyslog.rfc3164"))); - - /* load build-in strgen modules */ - CHKiRet(module.doModInit(modInitsmfile, UCHAR_CONSTANT("builtin-smfile"), NULL)); - CHKiRet(module.doModInit(modInitsmtradfile, UCHAR_CONSTANT("builtin-smtradfile"), NULL)); - CHKiRet(module.doModInit(modInitsmfwd, UCHAR_CONSTANT("builtin-smfwd"), NULL)); - CHKiRet(module.doModInit(modInitsmtradfwd, UCHAR_CONSTANT("builtin-smtradfwd"), NULL)); - - /* ok, initialization of the command handler probably does not 100% belong right in - * this space here. However, with the current design, this is actually quite a good - * place to put it. We might decide to shuffle it around later, but for the time - * being, the code has found its home here. A not-just-sideeffect of this decision - * is that rsyslog will terminate if we can not register our built-in config commands. - * This, I think, is the right thing to do. -- rgerhards, 2007-07-31 - */ - CHKiRet(regCfSysLineHdlr((uchar *)"logrsyslogstatusmessages", 0, eCmdHdlrBinary, NULL, &bLogStatusMsgs, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"defaultruleset", 0, eCmdHdlrGetWord, setDefaultRuleset, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"ruleset", 0, eCmdHdlrGetWord, setCurrRuleset, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"sleep", 0, eCmdHdlrInt, putToSleep, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuefilename", 0, eCmdHdlrGetWord, NULL, &pszMainMsgQFName, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesize", 0, eCmdHdlrInt, NULL, &iMainMsgQueueSize, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuehighwatermark", 0, eCmdHdlrInt, NULL, &iMainMsgQHighWtrMark, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuelowwatermark", 0, eCmdHdlrInt, NULL, &iMainMsgQLowWtrMark, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuediscardmark", 0, eCmdHdlrInt, NULL, &iMainMsgQDiscardMark, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuediscardseverity", 0, eCmdHdlrSeverity, NULL, &iMainMsgQDiscardSeverity, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuecheckpointinterval", 0, eCmdHdlrInt, NULL, &iMainMsgQPersistUpdCnt, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesyncqueuefiles", 0, eCmdHdlrBinary, NULL, &bMainMsgQSyncQeueFiles, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetype", 0, eCmdHdlrGetWord, setMainMsgQueType, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueueworkerthreads", 0, eCmdHdlrInt, NULL, &iMainMsgQueueNumWorkers, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetimeoutshutdown", 0, eCmdHdlrInt, NULL, &iMainMsgQtoQShutdown, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetimeoutactioncompletion", 0, eCmdHdlrInt, NULL, &iMainMsgQtoActShutdown, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuetimeoutenqueue", 0, eCmdHdlrInt, NULL, &iMainMsgQtoEnq, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueueworkertimeoutthreadshutdown", 0, eCmdHdlrInt, NULL, &iMainMsgQtoWrkShutdown, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeueslowdown", 0, eCmdHdlrInt, NULL, &iMainMsgQDeqSlowdown, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueueworkerthreadminimummessages", 0, eCmdHdlrInt, NULL, &iMainMsgQWrkMinMsgs, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuemaxfilesize", 0, eCmdHdlrSize, NULL, &iMainMsgQueMaxFileSize, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuebatchsize", 0, eCmdHdlrSize, NULL, &iMainMsgQueDeqBatchSize, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuemaxdiskspace", 0, eCmdHdlrSize, NULL, &iMainMsgQueMaxDiskSpace, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesaveonshutdown", 0, eCmdHdlrBinary, NULL, &bMainMsgQSaveOnShutdown, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuetimebegin", 0, eCmdHdlrInt, NULL, &iMainMsgQueueDeqtWinFromHr, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuetimeend", 0, eCmdHdlrInt, NULL, &iMainMsgQueueDeqtWinToHr, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"abortonuncleanconfig", 0, eCmdHdlrBinary, NULL, &bAbortOnUncleanConfig, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"repeatedmsgreduction", 0, eCmdHdlrBinary, NULL, &bReduceRepeatMsgs, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"actionresumeinterval", 0, eCmdHdlrInt, setActionResumeInterval, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"template", 0, eCmdHdlrCustomHandler, conf.doNameLine, (void*)DIR_TEMPLATE, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"outchannel", 0, eCmdHdlrCustomHandler, conf.doNameLine, (void*)DIR_OUTCHANNEL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"allowedsender", 0, eCmdHdlrCustomHandler, conf.doNameLine, (void*)DIR_ALLOWEDSENDER, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"modload", 0, eCmdHdlrCustomHandler, conf.doModLoad, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"includeconfig", 0, eCmdHdlrCustomHandler, conf.doIncludeLine, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"umask", 0, eCmdHdlrFileCreateMode, setUmask, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"maxopenfiles", 0, eCmdHdlrInt, setMaxFiles, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"debugprinttemplatelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintTemplateList, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"debugprintmodulelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintModuleList, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"debugprintcfsyslinehandlerlist", 0, eCmdHdlrBinary, - NULL, &bDebugPrintCfSysLineHandlerList, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"moddir", 0, eCmdHdlrGetWord, NULL, &pModDir, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"generateconfiggraph", 0, eCmdHdlrGetWord, NULL, &pszConfDAGFile, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"errormessagestostderr", 0, eCmdHdlrBinary, NULL, &bErrMsgToStderr, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"maxmessagesize", 0, eCmdHdlrSize, setMaxMsgSize, NULL, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"privdroptouser", 0, eCmdHdlrUID, NULL, &uidDropPriv, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"privdroptouserid", 0, eCmdHdlrInt, NULL, &uidDropPriv, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"privdroptogroup", 0, eCmdHdlrGID, NULL, &gidDropPriv, NULL)); - CHKiRet(regCfSysLineHdlr((uchar *)"privdroptogroupid", 0, eCmdHdlrGID, NULL, &gidDropPriv, NULL)); - -finalize_it: - RETiRet; -} - - /* print version and compile-time setting information. */ static void printVersion(void) @@ -2151,94 +1415,6 @@ static void printVersion(void) } -/* This function is called after initial initalization. It is used to - * move code out of the too-long main() function. - * rgerhards, 2007-10-17 - */ -static rsRetVal mainThread() -{ - DEFiRet; - uchar *pTmp; - - /* initialize the build-in templates */ - pTmp = template_DebugFormat; - tplAddLine("RSYSLOG_DebugFormat", &pTmp); - pTmp = template_SyslogProtocol23Format; - tplAddLine("RSYSLOG_SyslogProtocol23Format", &pTmp); - pTmp = template_FileFormat; /* new format for files with high-precision stamp */ - tplAddLine("RSYSLOG_FileFormat", &pTmp); - pTmp = template_TraditionalFileFormat; - tplAddLine("RSYSLOG_TraditionalFileFormat", &pTmp); - pTmp = template_WallFmt; - tplAddLine(" WallFmt", &pTmp); - pTmp = template_ForwardFormat; - tplAddLine("RSYSLOG_ForwardFormat", &pTmp); - pTmp = template_TraditionalForwardFormat; - tplAddLine("RSYSLOG_TraditionalForwardFormat", &pTmp); - pTmp = template_StdUsrMsgFmt; - tplAddLine(" StdUsrMsgFmt", &pTmp); - pTmp = template_StdDBFmt; - tplAddLine(" StdDBFmt", &pTmp); - pTmp = template_StdPgSQLFmt; - tplAddLine(" StdPgSQLFmt", &pTmp); - pTmp = template_spoofadr; - tplLastStaticInit(tplAddLine("RSYSLOG_omudpspoofDfltSourceTpl", &pTmp)); - - CHKiRet(init()); - - if(Debug && debugging_on) { - DBGPRINTF("Debugging enabled, SIGUSR1 to turn off debugging.\n"); - } - - /* Send a signal to the parent so it can terminate. - */ - if(myPid != ppid) - kill(ppid, SIGTERM); - - glbl.GenerateLocalHostNameProperty(); /* regenerate, FQDN setting may have changed */ - - /* If instructed to do so, we now drop privileges. Note that this is not 100% secure, - * because outputs are already running at this time. However, we can implement - * dropping of privileges rather quickly and it will work in many cases. While it is not - * the ultimate solution, the current one is still much better than not being able to - * drop privileges at all. Doing it correctly, requires a change in architecture, which - * we should do over time. TODO -- rgerhards, 2008-11-19 - */ - if(gidDropPriv != 0) { - doDropPrivGid(gidDropPriv); - } - - if(uidDropPriv != 0) { - doDropPrivUid(uidDropPriv); - } - - /* finally let the inputs run... */ - runInputModules(); - - /* END OF INTIALIZATION - */ - DBGPRINTF("initialization completed, transitioning to regular run mode\n"); - - /* close stderr and stdout if they are kept open during a fork. Note that this - * may introduce subtle security issues: if we are in a jail, one may break out of - * it via these descriptors. But if I close them earlier, error messages will (once - * again) not be emitted to the user that starts the daemon. As root jail support - * is still in its infancy (and not really done), we currently accept this issue. - * rgerhards, 2009-06-29 - */ - if(!(Debug == DEBUG_FULL || NoFork)) { - close(1); - close(2); - bErrMsgToStderr = 0; - } - - mainloop(); - -finalize_it: - RETiRet; -} - - /* Method to initialize all global classes and use the objects that we need. * rgerhards, 2008-01-04 * rgerhards, 2008-04-16: the actual initialization is now carried out by the runtime @@ -2263,8 +1439,6 @@ InitGlobalClasses(void) CHKiRet(objUse(module, CORE_COMPONENT)); pErrObj = "datetime"; CHKiRet(objUse(datetime, CORE_COMPONENT)); - pErrObj = "expr"; - CHKiRet(objUse(expr, CORE_COMPONENT)); pErrObj = "rule"; CHKiRet(objUse(rule, CORE_COMPONENT)); pErrObj = "ruleset"; @@ -2275,6 +1449,8 @@ InitGlobalClasses(void) CHKiRet(objUse(prop, CORE_COMPONENT)); pErrObj = "parser"; CHKiRet(objUse(parser, CORE_COMPONENT)); + pErrObj = "rsconf"; + CHKiRet(objUse(rsconf, CORE_COMPONENT)); /* intialize some dummy classes that are not part of the runtime */ pErrObj = "action"; @@ -2285,6 +1461,7 @@ InitGlobalClasses(void) /* TODO: the dependency on net shall go away! -- rgerhards, 2008-03-07 */ pErrObj = "net"; CHKiRet(objUse(net, LM_NET_FILENAME)); + dnscacheInit(); finalize_it: if(iRet != RS_RET_OK) { @@ -2317,9 +1494,8 @@ GlobalClassExit(void) objRelease(conf, CORE_COMPONENT); objRelease(ruleset, CORE_COMPONENT); objRelease(rule, CORE_COMPONENT); - objRelease(expr, CORE_COMPONENT); - vmClassExit(); /* this is hack, currently core_modules do not get this automatically called */ parserClassExit(); /* this is hack, currently core_modules do not get this automatically called */ + rsconfClassExit(); /* this is hack, currently core_modules do not get this automatically called */ objRelease(datetime, CORE_COMPONENT); /* TODO: implement the rest of the deinit */ @@ -2332,6 +1508,7 @@ GlobalClassExit(void) CHKiRet(objUse(errmsg, CORE_COMPONENT)); CHKiRet(objUse(module, CORE_COMPONENT)); #endif + dnscacheDeinit(); rsrtExit(); /* *THIS* *MUST/SHOULD?* always be the first class initilizer being called (except debug)! */ RETiRet; @@ -2627,18 +1804,16 @@ doGlblProcessInit(void) */ int realMain(int argc, char **argv) { - DEFiRet; - + rsRetVal localRet; int ch; extern int optind; extern char *optarg; int bEOptionWasGiven = 0; - int bImUxSockLoaded = 0; /* already generated a $ModLoad imuxsock? */ int iHelperUOpt; int bChDirRoot = 1; /* change the current working directory to "/"? */ char *arg; /* for command line option processing */ - uchar legacyConfLine[80]; char cwdbuf[128]; /* buffer to obtain/display current working directory */ + DEFiRet; /* first, parse the command line options. We do not carry out any actual work, just * see what we should do. This relieves us from certain anomalies and we can process @@ -2676,6 +1851,9 @@ int realMain(int argc, char **argv) case 'u': /* misc user settings */ case 'w': /* disable disallowed host warnings */ case 'x': /* disable dns for remote messages */ + case 'g': /* enable tcp gssapi logging */ + case 'r': /* accept remote messages */ + case 't': /* enable tcp logging */ CHKiRet(bufOptAdd(ch, optarg)); break; case 'c': /* compatibility mode */ @@ -2686,37 +1864,15 @@ int realMain(int argc, char **argv) Debug = 1; break; case 'e': /* log every message (no repeat message supression) */ - fprintf(stderr, "note: -e option is no longer supported, every message is now logged by default\n"); bEOptionWasGiven = 1; break; - case 'g': /* enable tcp gssapi logging */ -#if defined(SYSLOG_INET) && defined(USE_GSSAPI) - CHKiRet(bufOptAdd('g', optarg)); -#else - fprintf(stderr, "rsyslogd: -g not valid - not compiled with gssapi support"); -#endif - break; case 'M': /* default module load path -- this MUST be carried out immediately! */ glblModPath = (uchar*) optarg; break; - case 'r': /* accept remote messages */ -#ifdef SYSLOG_INET - CHKiRet(bufOptAdd(ch, optarg)); -#else - fprintf(stderr, "rsyslogd: -r not valid - not compiled with network support\n"); -#endif - break; - case 't': /* enable tcp logging */ -#ifdef SYSLOG_INET - CHKiRet(bufOptAdd(ch, optarg)); -#else - fprintf(stderr, "rsyslogd: -t not valid - not compiled with network support\n"); -#endif - break; case 'v': /* MUST be carried out immediately! */ printVersion(); exit(0); /* exit for -v option - so this is a "good one" */ - case '?': + case '?': default: usage(); } @@ -2748,10 +1904,6 @@ int realMain(int argc, char **argv) CHKiRet(prop.SetString(pInternalInputName, UCHAR_CONSTANT("rsyslogd"), sizeof("rsyslogd") - 1)); CHKiRet(prop.ConstructFinalize(pInternalInputName)); - CHKiRet(prop.Construct(&pLocalHostIP)); - CHKiRet(prop.SetString(pLocalHostIP, UCHAR_CONSTANT("127.0.0.1"), sizeof("127.0.0.1") - 1)); - CHKiRet(prop.ConstructFinalize(pLocalHostIP)); - /* get our host and domain names - we need to do this early as we may emit * error log messages, which need the correct hostname. -- rgerhards, 2008-04-04 */ @@ -2764,11 +1916,6 @@ int realMain(int argc, char **argv) exit(1); /* "good" exit, leaving at init for fatal error */ } - if((iRet = loadBuildInModules()) != RS_RET_OK) { - fprintf(stderr, "fatal error: could not activate built-in modules. Error code %d.\n", - iRet); - exit(1); /* "good" exit, leaving at init for fatal error */ - } /* END core initializations - we now come back to carrying out command line options*/ @@ -2785,32 +1932,15 @@ int realMain(int argc, char **argv) send_to_all++; break; case 'a': - if(iCompatibilityMode < 3) { - if(!bImUxSockLoaded) { - legacyOptsEnq((uchar *) "ModLoad imuxsock"); - bImUxSockLoaded = 1; - } - snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "addunixlistensocket %s", arg); - legacyOptsEnq(legacyConfLine); - } else { - fprintf(stderr, "error -a is no longer supported, use module imuxsock instead"); - } + fprintf(stderr, "rsyslogd: error -a is no longer supported, use module imuxsock instead"); break; case 'f': /* configuration file */ ConfFile = (uchar*) arg; break; case 'g': /* enable tcp gssapi logging */ - if(iCompatibilityMode < 3) { - legacyOptsParseTCP(ch, arg); - } else - fprintf(stderr, "-g option only supported in compatibility modes 0 to 2 - ignored\n"); - break; + fprintf(stderr, "rsyslogd: -g option no longer supported - ignored\n"); case 'h': - if(iCompatibilityMode < 3) { - errmsg.LogError(0, NO_ERRCODE, "WARNING: -h option is no longer supported - ignored"); - } else { - usage(); /* for v3 and above, it simply is an error */ - } + fprintf(stderr, "rsyslogd: error -h is no longer supported - ignored"); break; case 'i': /* pid file name */ PidFile = arg; @@ -2823,11 +1953,7 @@ int realMain(int argc, char **argv) } break; case 'm': /* mark interval */ - if(iCompatibilityMode < 3) { - MarkInterval = atoi(arg) * 60; - } else - fprintf(stderr, - "-m option only supported in compatibility modes 0 to 2 - ignored\n"); + fprintf(stderr, "rsyslogd: error -m is no longer supported - use immark instead"); break; case 'n': /* don't fork */ NoFork = 1; @@ -2836,27 +1962,10 @@ int realMain(int argc, char **argv) iConfigVerify = atoi(arg); break; case 'o': - if(iCompatibilityMode < 3) { - if(!bImUxSockLoaded) { - legacyOptsEnq((uchar *) "ModLoad imuxsock"); - bImUxSockLoaded = 1; - } - legacyOptsEnq((uchar *) "OmitLocalLogging"); - } else { - fprintf(stderr, "error -o is no longer supported, use module imuxsock instead"); - } + fprintf(stderr, "error -o is no longer supported, use module imuxsock instead"); break; case 'p': - if(iCompatibilityMode < 3) { - if(!bImUxSockLoaded) { - legacyOptsEnq((uchar *) "ModLoad imuxsock"); - bImUxSockLoaded = 1; - } - snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "SystemLogSocketName %s", arg); - legacyOptsEnq(legacyConfLine); - } else { - fprintf(stderr, "error -p is no longer supported, use module imuxsock instead"); - } + fprintf(stderr, "error -p is no longer supported, use module imuxsock instead"); break; case 'q': /* add hostname if DNS resolving has failed */ *(net.pACLAddHostnameOnFail) = 1; @@ -2865,12 +1974,7 @@ int realMain(int argc, char **argv) *(net.pACLDontResolve) = 1; break; case 'r': /* accept remote messages */ - if(iCompatibilityMode < 3) { - legacyOptsEnq((uchar *) "ModLoad imudp"); - snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "UDPServerRun %s", arg); - legacyOptsEnq(legacyConfLine); - } else - fprintf(stderr, "-r option only supported in compatibility modes 0 to 2 - ignored\n"); + fprintf(stderr, "rsyslogd: error option -r is no longer supported - ignored"); break; case 's': if(glbl.GetStripDomains() != NULL) { @@ -2880,10 +1984,7 @@ int realMain(int argc, char **argv) } break; case 't': /* enable tcp logging */ - if(iCompatibilityMode < 3) { - legacyOptsParseTCP(ch, arg); - } else - fprintf(stderr, "-t option only supported in compatibility modes 0 to 2 - ignored\n"); + fprintf(stderr, "rsyslogd: error option -t is no longer supported - ignored"); break; case 'T':/* chroot() immediately at program startup, but only for testing, NOT security yet */ if(chroot(arg) != 0) { @@ -2918,32 +2019,30 @@ int realMain(int argc, char **argv) VERSION, iConfigVerify, ConfFile); } + localRet = rsconf.Load(&ourConf, ConfFile); + if(localRet == RS_RET_NONFATAL_CONFIG_ERR) { + if(loadConf->globals.bAbortOnUncleanConfig) { + fprintf(stderr, "rsyslogd: $AbortOnUncleanConfig is set, and config is not clean.\n" + "Check error log for details, fix errors and restart. As a last\n" + "resort, you may want to remove $AbortOnUncleanConfig to permit a\n" + "startup with a dirty config.\n"); + exit(2); + } + if(iConfigVerify) { + /* a bit dirty, but useful... */ + exit(1); + } + localRet = RS_RET_OK; + } + CHKiRet(localRet); + if(bChDirRoot) { if(chdir("/") != 0) fprintf(stderr, "Can not do 'cd /' - still trying to run\n"); } - /* process compatibility mode settings */ - if(iCompatibilityMode < 4) { - errmsg.LogError(0, NO_ERRCODE, "WARNING: rsyslogd is running in compatibility mode. Automatically " - "generated config directives may interfer with your rsyslog.conf settings. " - "We suggest upgrading your config and adding -c5 as the first " - "rsyslogd option."); - } - - if(iCompatibilityMode < 3) { - if(MarkInterval > 0) { - legacyOptsEnq((uchar *) "ModLoad immark"); - snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "MarkMessagePeriod %d", MarkInterval); - legacyOptsEnq(legacyConfLine); - } - if(!bImUxSockLoaded) { - legacyOptsEnq((uchar *) "ModLoad imuxsock"); - } - } - - if(bEOptionWasGiven && iCompatibilityMode < 3) { + if(bEOptionWasGiven) { errmsg.LogError(0, NO_ERRCODE, "WARNING: \"message repeated n times\" feature MUST be turned on in " "rsyslog.conf - CURRENTLY EVERY MESSAGE WILL BE LOGGED. Visit " "http://www.rsyslog.com/rptdmsgreduction to learn " @@ -2953,7 +2052,34 @@ int realMain(int argc, char **argv) if(!iConfigVerify) CHKiRet(doGlblProcessInit()); - CHKiRet(mainThread()); + CHKiRet(init()); + + if(Debug && debugging_on) { + dbgprintf("Debugging enabled, SIGUSR1 to turn off debugging.\n"); + } + + /* Send a signal to the parent so it can terminate. */ + if(myPid != ppid) + kill(ppid, SIGTERM); + + + /* END OF INTIALIZATION */ + DBGPRINTF("initialization completed, transitioning to regular run mode\n"); + + /* close stderr and stdout if they are kept open during a fork. Note that this + * may introduce subtle security issues: if we are in a jail, one may break out of + * it via these descriptors. But if I close them earlier, error messages will (once + * again) not be emitted to the user that starts the daemon. As root jail support + * is still in its infancy (and not really done), we currently accept this issue. + * rgerhards, 2009-06-29 + */ + if(!(Debug == DEBUG_FULL || NoFork)) { + close(1); + close(2); + ourConf->globals.bErrMsgToStderr = 0; + } + + mainloop(); /* do any de-init's that need to be done AFTER this comment */ @@ -2965,7 +2091,7 @@ finalize_it: if(iRet == RS_RET_VALIDATION_RUN) { fprintf(stderr, "rsyslogd: End of config validation run. Bye.\n"); } else if(iRet != RS_RET_OK) { - fprintf(stderr, "rsyslogd run failed with error %d (see rsyslog.h " + fprintf(stderr, "rsyslogd: run failed with error %d (see rsyslog.h " "or try http://www.rsyslog.com/e/%d to learn what that number means)\n", iRet, iRet*-1); } |