diff options
Diffstat (limited to 'tests')
59 files changed, 750 insertions, 20 deletions
diff --git a/tests/Makefile.am b/tests/Makefile.am index 7cc25e41..61fc808e 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -2,18 +2,31 @@ if ENABLE_TESTBENCH TESTRUNS = rt_init rscript check_PROGRAMS = $(TESTRUNS) ourtail nettester tcpflood chkseq TESTS = $(TESTRUNS) cfg.sh \ + arrayqueue.sh \ + linkedlistqueue.sh \ + da-mainmsg-q.sh \ validation-run.sh \ imtcp-multiport.sh \ + daqueue-persist.sh \ diskqueue.sh \ diskqueue-fsync.sh \ + rulesetmultiqueue.sh \ manytcp.sh \ + rsf_getenv.sh \ sndrcv.sh \ sndrcv_gzip.sh \ + sndrcv_udp.sh \ + sndrcv_udp_nonstdpt.sh \ queue-persist.sh \ - pipeaction.sh + pipeaction.sh \ execonlyonce.sh \ queue-persist.sh +if ENABLE_OMUDPSPOOF +TESTS += sndrcv_omudpspoof.sh \ + sndrcv_omudpspoof_nonstdpt.sh +endif + if ENABLE_OMSTDOUT TESTS += omod-if-array.sh \ proprepltest.sh \ @@ -22,9 +35,16 @@ TESTS += omod-if-array.sh \ inputname.sh \ threadingmq.sh \ threadingmqaq.sh \ + discard.sh \ + badqi.sh \ fieldtest.sh endif +if ENABLE_OMRULESET +TESTS += omruleset.sh \ + omruleset-queue.sh +endif + check_JAVA = DiagTalker.java endif # if ENABLE_TESTBENCH @@ -78,6 +98,7 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \ testsuites/1.parse1 \ testsuites/2.parse1 \ testsuites/3.parse1 \ + testsuites/4.parse1 \ testsuites/oversizeTag-1.parse1 \ testsuites/weird.parse1 \ testsuites/date1.parse1 \ @@ -90,6 +111,10 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \ testsuites/rfc5424-2.parse1 \ testsuites/rfc5424-3.parse1 \ testsuites/rfc5424-4.parse1 \ + testsuites/malformed1.parse1 \ + testsuites/reallife.parse1 \ + testsuites/parse2.conf \ + testsuites/reallife.parse2 \ testsuites/parse3.conf \ testsuites/reallife.parse3 \ testsuites/parse_invld_regex.conf \ @@ -100,8 +125,16 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \ killrsyslog.sh \ parsertest.sh \ fieldtest.sh \ + rsf_getenv.sh \ + testsuites/rsf_getenv.conf \ diskqueue.sh \ testsuites/diskqueue.conf \ + arrayqueue.sh \ + testsuites/arrayqueue.conf \ + linkedlistqueue.sh \ + testsuites/linkedlistqueue.conf \ + da-mainmsg-q.sh \ + testsuites/da-mainmsg-q.conf \ diskqueue-fsync.sh \ testsuites/diskqueue-fsync.conf \ imtcp-multiport.sh \ @@ -114,9 +147,13 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \ testsuites/1.inputname_imtcp_12515 \ testsuites/1.inputname_imtcp_12516 \ omod-if-array.sh \ + discard.sh \ + testsuites/discard.conf \ diag.sh \ testsuites/diag-common.conf \ testsuites/diag-common2.conf \ + daqueue-persist.sh \ + daqueue-persist-drvr.sh \ queue-persist.sh \ queue-persist-drvr.sh \ testsuites/queue-persist.conf \ @@ -128,6 +165,18 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \ sndrcv.sh \ testsuites/sndrcv_sender.conf \ testsuites/sndrcv_rcvr.conf \ + sndrcv_udp.sh \ + testsuites/sndrcv_udp_sender.conf \ + testsuites/sndrcv_udp_rcvr.conf \ + sndrcv_udp_nonstdpt.sh \ + testsuites/sndrcv_udp_nonstdpt_sender.conf \ + testsuites/sndrcv_udp_nonstdpt_rcvr.conf \ + sndrcv_omudpspoof.sh \ + testsuites/sndrcv_omudpspoof_sender.conf \ + testsuites/sndrcv_omudpspoof_rcvr.conf \ + sndrcv_omudpspoof_nonstdpt.sh \ + testsuites/sndrcv_omudpspoof_nonstdpt_sender.conf \ + testsuites/sndrcv_omudpspoof_nonstdpt_rcvr.conf \ sndrcv_gzip.sh \ testsuites/sndrcv_gzip_sender.conf \ testsuites/sndrcv_gzip_rcvr.conf \ @@ -138,6 +187,15 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \ testsuites/master.rfctag \ testsuites/nolimittag.conf \ testsuites/master.nolimittag \ + rulesetmultiqueue.sh \ + testsuites/rulesetmultiqueue.conf \ + omruleset.sh \ + testsuites/omruleset.conf \ + omruleset-queue.sh \ + testsuites/omruleset-queue.conf \ + badqi.sh \ + testsuites/badqi.conf \ + bad_qi/dbq.qi \ execonlyonce.sh \ testsuites/execonlyonce.conf \ testsuites/execonlyonce.data \ diff --git a/tests/arrayqueue.sh b/tests/arrayqueue.sh new file mode 100755 index 00000000..71e1cc21 --- /dev/null +++ b/tests/arrayqueue.sh @@ -0,0 +1,18 @@ +# Test for fixedArray queue mode +# added 2009-05-20 by rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo =============================================================================== +echo \[arrayqueue.sh\]: testing queue fixedArray queue mode +source $srcdir/diag.sh init +source $srcdir/diag.sh startup arrayqueue.conf + +# 40000 messages should be enough +source $srcdir/diag.sh injectmsg 0 40000 + +# terminate *now* (don't wait for queue to drain!) +kill `cat rsyslog.pid` + +# now wait until rsyslog.pid is gone (and the process finished) +source $srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh seq-check 0 39999 +source $srcdir/diag.sh exit diff --git a/tests/bad_qi/dbq.qi b/tests/bad_qi/dbq.qi new file mode 100644 index 00000000..5f56e41a --- /dev/null +++ b/tests/bad_qi/dbq.qi @@ -0,0 +1,29 @@ +!OPB:1:queue:1: ++iQueueSize:2:2:84: ++iUngottenObjs:2:1:1: ++tVars.disk.sizeOnDisk:2:5:57906: ++tVars.disk.bytesRead:2:4:1010: +>End +. +<Obj:1:strm:1: ++iCurrFNum:2:1:1: ++pszFName:1:3:dbq: ++iMaxFiles:2:8:10000000: ++bDeleteOnClose:2:1:0: ++sType:2:1:1: ++tOperationsMode:2:1:2: ++tOpenMode:2:3:384: ++iCurrOffs:2:5:57906: +>End +. +<Obj:1:strm:1: ++iCurrFNum:2:1:1: ++pszFName:1:3:dbq: ++iMaxFiles:2:8:10000000: ++bDeleteOnClose:2:1:1: ++sType:2:1:1: ++tOperationsMode:2:1:1: ++tOpenMode:2:3:384: ++iCurrOffs:2:4:1010: +>End +. diff --git a/tests/badqi.sh b/tests/badqi.sh new file mode 100755 index 00000000..81f8c1c2 --- /dev/null +++ b/tests/badqi.sh @@ -0,0 +1,16 @@ +# Test for a startup with a bad qi file. This tests simply tests +# if the rsyslog engine survives (we had segfaults in this situation +# in the past). +# added 2009-10-21 by RGerhards +# This file is part of the rsyslog project, released under GPLv3 +# uncomment for debugging support: +echo =============================================================================== +echo \[badqi.sh\]: test startup with invalid .qi file +source $srcdir/diag.sh init +source $srcdir/diag.sh startup badqi.conf +# we just inject a handful of messages so that we have something to wait for... +source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1 20 +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh wait-shutdown # wait for process to terminate +source $srcdir/diag.sh seq-check 0 19 +source $srcdir/diag.sh exit diff --git a/tests/cfg.sh b/tests/cfg.sh index cb838354..f850c4d1 100755 --- a/tests/cfg.sh +++ b/tests/cfg.sh @@ -31,6 +31,7 @@ # # A copy of the GPL can be found in the file "COPYING" in this distribution. #set -x +echo \[cfg.sh\]: rm -f tmp echo "local directory" # diff --git a/tests/da-mainmsg-q.sh b/tests/da-mainmsg-q.sh new file mode 100755 index 00000000..d9cc0d4d --- /dev/null +++ b/tests/da-mainmsg-q.sh @@ -0,0 +1,33 @@ +# Test for DA mode on the main message queue +# This test checks if DA mode operates correctly. To do so, +# it uses a small in-memory queue size, so that DA mode is initiated +# rather soon, and disk spooling used. There is some uncertainty (based +# on machine speeds), but in general the test should work rather well. +# We add a few messages after the initial run, just so that we can +# check everything recovers from DA mode correctly. +# added 2009-04-22 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo =============================================================================== +echo "[da-mainmsg-q.sh]: testing main message queue in DA mode (going to disk)" +source $srcdir/diag.sh init +source $srcdir/diag.sh startup da-mainmsg-q.conf + +# part1: send first 50 messages (in memory, only) +#source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1 50 +source $srcdir/diag.sh injectmsg 0 50 +source $srcdir/diag.sh wait-queueempty # let queue drain for this test case + +# part 2: send bunch of messages. This should trigger DA mode +#source $srcdir/diag.sh injectmsg 50 20000 +source $srcdir/diag.sh injectmsg 50 2000 +ls -l test-spool # for manual review + +# send another handful +source $srcdir/diag.sh injectmsg 2050 50 +#sleep 1 # we need this so that rsyslogd can receive all outstanding messages + +# clean up and check test result +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh seq-check 0 2099 +source $srcdir/diag.sh exit diff --git a/tests/daqueue-persist-drvr.sh b/tests/daqueue-persist-drvr.sh new file mode 100755 index 00000000..7934eb2b --- /dev/null +++ b/tests/daqueue-persist-drvr.sh @@ -0,0 +1,36 @@ +# Test for queue data persisting at shutdown. The +# plan is to start an instance, emit some data, do a relatively +# fast shutdown and then re-start the engine to process the +# remaining data. +# added 2009-05-27 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +# uncomment for debugging support: +echo \[daqueue-persist-drvr.sh\]: testing memory daqueue persisting to disk, mode $1 +source $srcdir/diag.sh init + +#export RSYSLOG_DEBUG="debug nologfuncflow nostdout noprintmutexaction" +#export RSYSLOG_DEBUGLOG="log" + +# prepare config +echo \$MainMsgQueueType $1 > work-queuemode.conf +echo "*.* :omtesting:sleep 0 1000" > work-delay.conf + +# inject 10000 msgs, so that DO hit the high watermark +source $srcdir/diag.sh startup queue-persist.conf +source $srcdir/diag.sh injectmsg 0 10000 +$srcdir/diag.sh shutdown-immediate +$srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh check-mainq-spool + +echo "Enter phase 2, rsyslogd restart" + +exit + +# restart engine and have rest processed +#remove delay +echo "#" > work-delay.conf +source $srcdir/diag.sh startup queue-persist.conf +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +$srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh seq-check 0 99999 +source $srcdir/diag.sh exit diff --git a/tests/daqueue-persist.sh b/tests/daqueue-persist.sh new file mode 100755 index 00000000..feb2a347 --- /dev/null +++ b/tests/daqueue-persist.sh @@ -0,0 +1,12 @@ +# Test for queue data persisting at shutdown. We use the actual driver +# to carry out multiple tests with different queue modes +# added 2009-05-27 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo \[daqueue-persist.sh\]: test data persisting at shutdown +source $srcdir/daqueue-persist-drvr.sh LinkedList +source $srcdir/daqueue-persist-drvr.sh FixedArray +# the disk test should not fail, however, the config is extreme and using +# it more or less is a config error +source $srcdir/daqueue-persist-drvr.sh Disk +# we do not test Direct mode because this absolute can not work in direct mode +# (maybe we should do a fail-type of test?) diff --git a/tests/diag.sh b/tests/diag.sh index f3d75a15..98228b12 100755 --- a/tests/diag.sh +++ b/tests/diag.sh @@ -5,11 +5,11 @@ # not always able to convey back states to the upper-level test driver # begun 2009-05-27 by rgerhards # This file is part of the rsyslog project, released under GPLv3 -#valgrind="valgrind --log-fd=1" +#valgrind="valgrind --malloc-fill=ff --free-fill=fe --log-fd=1" #valgrind="valgrind --tool=drd --log-fd=1" #valgrind="valgrind --tool=helgrind --log-fd=1" #set -o xtrace -#export RSYSLOG_DEBUG="debug nostdout printmutexaction" +#export RSYSLOG_DEBUG="debug nostdout noprintmutexaction" #export RSYSLOG_DEBUGLOG="log" case $1 in 'init') $srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason @@ -26,6 +26,7 @@ case $1 in rm -f rsyslogd2.started diag-common2.conf rm -f work rsyslog.out.log rsyslog.out.log.save # common work files rm -rf test-spool + echo ------------------------------------------------------------------------------- ;; 'startup') # start rsyslogd with default params. $2 is the config file name to use # returns only after successful startup, $3 is the instance (blank or 2!) @@ -43,6 +44,12 @@ case $1 in while test -f rsyslog$2.pid; do true done + if [ -e core.* ] + then + echo "ABORT! core file exists, starting interactive shell" + bash + exit 1 + fi ;; 'wait-queueempty') # wait for main message queue to be empty. $2 is the instance. if [ "$2" == "2" ] @@ -87,7 +94,8 @@ case $1 in rm -f work sort < rsyslog.out.log > work # $4... are just to have the abilit to pass in more options... - ./chkseq -fwork -v -s$2 -e$3 $4 $5 $6 $7 + # add -v to chkseq if you need more verbose output + ./chkseq -fwork -s$2 -e$3 $4 $5 $6 $7 if [ "$?" -ne "0" ]; then echo "sequence error detected" exit 1 @@ -107,7 +115,7 @@ case $1 in ;; 'nettester') # perform nettester-based tests # use -v for verbose output! - ./nettester -t$2 -i$3 + ./nettester -t$2 -i$3 $4 if [ "$?" -ne "0" ]; then exit 1 fi diff --git a/tests/discard.sh b/tests/discard.sh new file mode 100755 index 00000000..9824b361 --- /dev/null +++ b/tests/discard.sh @@ -0,0 +1,17 @@ +# Test for discard functionality +# This test checks if discard works. It is not a perfect test but +# will find at least segfaults and obviously not discarded messages. +# added 2009-07-30 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +# uncomment for debugging support: +echo =============================================================================== +echo \[discard.sh\]: testing discard functionality +source $srcdir/diag.sh init +source $srcdir/diag.sh startup discard.conf +# 20000 messages should be enough - the disk test is slow enough ;) +sleep 4 +source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1 10 1 +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh seq-check 2 10 +source $srcdir/diag.sh exit diff --git a/tests/diskqueue-fsync.sh b/tests/diskqueue-fsync.sh index 0282202d..c826d32c 100755 --- a/tests/diskqueue-fsync.sh +++ b/tests/diskqueue-fsync.sh @@ -5,7 +5,7 @@ # added 2009-06-09 by Rgerhards # This file is part of the rsyslog project, released under GPLv3 # uncomment for debugging support: -echo testing queue disk-only mode, fsync case +echo \[diskqueue-fsync.sh\]: testing queue disk-only mode, fsync case source $srcdir/diag.sh init source $srcdir/diag.sh startup diskqueue-fsync.conf # 1000 messages should be enough - the disk fsync test is very slow! diff --git a/tests/diskqueue.sh b/tests/diskqueue.sh index 8233d569..e91f0633 100755 --- a/tests/diskqueue.sh +++ b/tests/diskqueue.sh @@ -5,7 +5,7 @@ # added 2009-04-17 by Rgerhards # This file is part of the rsyslog project, released under GPLv3 # uncomment for debugging support: -echo diskqueue.sh: testing queue disk-only mode +echo \[diskqueue.sh\]: testing queue disk-only mode source $srcdir/diag.sh init source $srcdir/diag.sh startup diskqueue.conf # 20000 messages should be enough - the disk test is slow enough ;) diff --git a/tests/execonlyonce.sh b/tests/execonlyonce.sh index a9b9d932..6ddc89b5 100755 --- a/tests/execonlyonce.sh +++ b/tests/execonlyonce.sh @@ -16,6 +16,7 @@ sleep 4 # one more than the once inerval! # and inject another couple of messages source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1 10 100 source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh wait-shutdown # now we need your custom logic to see if the result is equal to the # expected result diff --git a/tests/fieldtest.sh b/tests/fieldtest.sh index 482fa143..9875fda6 100755 --- a/tests/fieldtest.sh +++ b/tests/fieldtest.sh @@ -1,4 +1,4 @@ -echo test fieldtest via udp +echo \[fieldtest.sh\]: test fieldtest via udp $srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason ./nettester -tfield1 -iudp diff --git a/tests/inputname.sh b/tests/inputname.sh index e1a58517..71f11c1e 100755 --- a/tests/inputname.sh +++ b/tests/inputname.sh @@ -1,4 +1,4 @@ -echo testing $InputTCPServerInputName directive +echo \[inputname.sh\]: testing $InputTCPServerInputName directive $srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason echo port 12514 diff --git a/tests/linkedlistqueue.sh b/tests/linkedlistqueue.sh new file mode 100755 index 00000000..e6d48a68 --- /dev/null +++ b/tests/linkedlistqueue.sh @@ -0,0 +1,17 @@ +# Test for Linkedlist queue mode +# added 2009-05-20 by rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo \[linkedlistqueue.sh\]: testing queue Linkedlist queue mode +source $srcdir/diag.sh init +source $srcdir/diag.sh startup linkedlistqueue.conf + +# 40000 messages should be enough +source $srcdir/diag.sh injectmsg 0 40000 + +# terminate *now* (don't wait for queue to drain) +kill `cat rsyslog.pid` + +# now wait until rsyslog.pid is gone (and the process finished) +source $srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh seq-check 0 39999 +source $srcdir/diag.sh exit diff --git a/tests/manytcp.sh b/tests/manytcp.sh index c55eb9c0..06e2fac9 100755 --- a/tests/manytcp.sh +++ b/tests/manytcp.sh @@ -1,4 +1,5 @@ # test many concurrent tcp connections +echo \[manytcp.sh\]: test concurrent tcp connections source $srcdir/diag.sh init source $srcdir/diag.sh startup manytcp.conf # the config file specifies exactly 1100 connections diff --git a/tests/nettester.c b/tests/nettester.c index 209c2a6f..7f1a6b1f 100644 --- a/tests/nettester.c +++ b/tests/nettester.c @@ -47,6 +47,7 @@ #include <signal.h> #include <netinet/in.h> #include <getopt.h> +#include <errno.h> #define EXIT_FAILURE 1 #define INVALID_SOCKET -1 @@ -61,6 +62,7 @@ static char *testSuite = NULL; /* name of current test suite */ static int iPort = 12514; /* port which shall be used for sending data */ static char* pszCustomConf = NULL; /* custom config file, use -c conf to specify */ static int verbose = 0; /* verbose output? -v option */ +static int IPv4Only = 0; /* use only IPv4 in rsyslogd call? */ /* these two are quick hacks... */ int iFailed = 0; @@ -90,6 +92,7 @@ void readLine(int fd, char *ln) if(verbose) fprintf(stderr, "begin readLine\n"); lenRead = read(fd, &c, 1); + while(lenRead == 1 && c != '\n') { if(c == '\0') { *ln = c; @@ -102,6 +105,11 @@ void readLine(int fd, char *ln) } *ln = '\0'; + if(lenRead < 0) { + printf("read from rsyslogd returned with error '%s' - aborting test\n", strerror(errno)); + exit(1); + } + if(verbose) fprintf(stderr, "end readLine, val read '%s'\n", orig); } @@ -147,7 +155,7 @@ tcpSend(char *buf, int lenBuf) fprintf(stderr, "connect() failed\n"); return(1); } else { - usleep(100000); /* 0.1 sec, these are us! */ + usleep(100000); /* ms = 1000 us! */ } } } @@ -214,7 +222,7 @@ int openPipe(char *configFile, pid_t *pid, int *pfd) int pipefd[2]; pid_t cpid; char *newargv[] = {"../tools/rsyslogd", "dummy", "-c4", "-u2", "-n", "-irsyslog.pid", - "-M../runtime/.libs:../.libs", NULL }; + "-M../runtime/.libs:../.libs", NULL, NULL}; char confFile[1024]; char *newenviron[] = { NULL }; /* debug aide... @@ -226,6 +234,9 @@ int openPipe(char *configFile, pid_t *pid, int *pfd) (pszCustomConf == NULL) ? configFile : pszCustomConf); newargv[1] = confFile; + if(IPv4Only) + newargv[(sizeof(newargv)/sizeof(char*)) - 2] = "-4"; + if (pipe(pipefd) == -1) { perror("pipe"); exit(EXIT_FAILURE); @@ -308,6 +319,10 @@ processTestFile(int fd, char *pszFileName) /* pull response from server and then check if it meets our expectation */ readLine(fd, buf); + if(strlen(buf) == 0) { + printf("something went wrong - read a zero-length string from rsyslogd\n"); + exit(1); + } if(strcmp(expected, buf)) { ++iFailed; printf("\nExpected Response:\n'%s'\nActual Response:\n'%s'\n", @@ -315,10 +330,13 @@ processTestFile(int fd, char *pszFileName) ret = 1; } + /* clean up after the try */ + free(testdata); + testdata = NULL; + free(expected); + expected = NULL; } - free(testdata); - free(expected); fclose(fp); return(ret); } @@ -372,11 +390,24 @@ doTests(int fd, char *files) return(iFailed); } + +/* indicate that our child has died (where it is not permitted to!). + */ +void childDied(__attribute__((unused)) int sig) +{ + printf("ERROR: child died unexpectedly (maybe a segfault?)!\n"); + exit(1); +} + + /* cleanup */ void doAtExit(void) { int status; + /* disarm died-child handler */ + signal(SIGCHLD, SIG_IGN); + if(rsyslogdPid != 0) { kill(rsyslogdPid, SIGTERM); waitpid(rsyslogdPid, &status, 0); /* wait until instance terminates */ @@ -399,8 +430,11 @@ int main(int argc, char *argv[]) char buf[4096]; char testcases[4096]; - while((opt = getopt(argc, argv, "c:i:p:t:v")) != EOF) { + while((opt = getopt(argc, argv, "4c:i:p:t:v")) != EOF) { switch((char)opt) { + case '4': + IPv4Only = 1; + break; case 'c': pszCustomConf = optarg; break; @@ -457,6 +491,9 @@ int main(int argc, char *argv[]) } fclose(fp); + /* arm died-child handler */ + signal(SIGCHLD, childDied); + /* start to be tested rsyslogd */ openPipe(testSuite, &rsyslogdPid, &fd); readLine(fd, buf); @@ -467,5 +504,6 @@ int main(int argc, char *argv[]) ret = 1; if(verbose) printf("End of nettester run (%d).\n", ret); + exit(ret); } diff --git a/tests/omod-if-array.sh b/tests/omod-if-array.sh index 2c2a8ef3..4e916f1e 100755 --- a/tests/omod-if-array.sh +++ b/tests/omod-if-array.sh @@ -1,4 +1,4 @@ -echo test omod-if-array via udp +echo \[omod-if-array.sh\]: test omod-if-array via udp $srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason ./nettester -tomod-if-array -iudp -p4711 diff --git a/tests/omruleset-queue.sh b/tests/omruleset-queue.sh new file mode 100755 index 00000000..cfb80c62 --- /dev/null +++ b/tests/omruleset-queue.sh @@ -0,0 +1,19 @@ +# test for omruleset. What we do is have the main queue forward +# all messages to a secondary ruleset via omruleset, which then does +# the actual file write. We check if all messages arrive at the file, +# what implies that omruleset works. No filters or special queue modes +# are used, but the ruleset uses its own queue. So we can also inject +# more messages without running into troubles. +# added 2009-11-02 by rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo =============================================================================== +echo \[omruleset-queue.sh\]: test for omruleset functionality with a ruleset queue +source $srcdir/diag.sh init +source $srcdir/diag.sh startup omruleset-queue.conf +source $srcdir/diag.sh injectmsg 0 20000 +echo doing shutdown +source $srcdir/diag.sh shutdown-when-empty +echo wait on shutdown +source $srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh seq-check 0 19999 +source $srcdir/diag.sh exit diff --git a/tests/omruleset.sh b/tests/omruleset.sh new file mode 100755 index 00000000..dbc5cb31 --- /dev/null +++ b/tests/omruleset.sh @@ -0,0 +1,22 @@ +# Basic test for omruleset. What we do is have the main queue forward +# all messages to a secondary ruleset via omruleset, which then does +# the actual file write. We check if all messages arrive at the file, +# what implies that omruleset works. No filters or special queue modes +# are used, so the message is re-enqueued into the main message queue. +# We inject just 5,000 message because we may otherwise run into +# queue full conditions (as we use the same queue) and that +# would result in longer execution time. In any case, 5000 messages +# are well enough to test what we want to test. +# added 2009-11-02 by rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo =============================================================================== +echo \[omruleset.sh\]: basic test for omruleset functionality +source $srcdir/diag.sh init +source $srcdir/diag.sh startup omruleset.conf +source $srcdir/diag.sh injectmsg 0 5000 +echo doing shutdown +source $srcdir/diag.sh shutdown-when-empty +echo wait on shutdown +source $srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh seq-check 0 4999 +source $srcdir/diag.sh exit diff --git a/tests/parsertest.sh b/tests/parsertest.sh index 5966a11b..fb392db3 100755 --- a/tests/parsertest.sh +++ b/tests/parsertest.sh @@ -2,6 +2,8 @@ echo TEST: \[parsertest.sh\]: various parser tests source $srcdir/diag.sh init source $srcdir/diag.sh nettester parse1 udp source $srcdir/diag.sh nettester parse1 tcp +source $srcdir/diag.sh nettester parse2 udp +source $srcdir/diag.sh nettester parse2 tcp source $srcdir/diag.sh nettester parse3 udp source $srcdir/diag.sh nettester parse3 tcp source $srcdir/diag.sh nettester parse_invld_regex udp @@ -10,6 +12,8 @@ source $srcdir/diag.sh nettester parse_invld_regex tcp echo \[parsertest.sh]: redoing tests in IPv4-only mode source $srcdir/diag.sh nettester parse1 udp -4 source $srcdir/diag.sh nettester parse1 tcp -4 +source $srcdir/diag.sh nettester parse2 udp -4 +source $srcdir/diag.sh nettester parse2 tcp -4 source $srcdir/diag.sh nettester parse3 udp -4 source $srcdir/diag.sh nettester parse3 tcp -4 source $srcdir/diag.sh nettester parse_invld_regex udp -4 diff --git a/tests/proprepltest.sh b/tests/proprepltest.sh index 3c252e52..2e59a31d 100755 --- a/tests/proprepltest.sh +++ b/tests/proprepltest.sh @@ -1,4 +1,4 @@ -echo TEST: proprepltest.sh - various tests for the property replacer +echo \[proprepltest.sh\]: various tests for the property replacer source $srcdir/diag.sh init source $srcdir/diag.sh nettester rfctag udp source $srcdir/diag.sh nettester rfctag tcp diff --git a/tests/queue-persist-drvr.sh b/tests/queue-persist-drvr.sh index ea5386a7..53fbcb8b 100755 --- a/tests/queue-persist-drvr.sh +++ b/tests/queue-persist-drvr.sh @@ -24,5 +24,6 @@ source $srcdir/diag.sh check-mainq-spool echo "#" > work-delay.conf source $srcdir/diag.sh startup queue-persist.conf source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +$srcdir/diag.sh wait-shutdown source $srcdir/diag.sh seq-check 0 4999 source $srcdir/diag.sh exit diff --git a/tests/queue-persist.sh b/tests/queue-persist.sh index 999655b1..ff1842bb 100755 --- a/tests/queue-persist.sh +++ b/tests/queue-persist.sh @@ -2,6 +2,7 @@ # to carry out multiple tests with different queue modes # added 2009-05-27 by Rgerhards # This file is part of the rsyslog project, released under GPLv3 +echo \[queue-persist.sh\]: source $srcdir/queue-persist-drvr.sh LinkedList source $srcdir/queue-persist-drvr.sh FixedArray # the disk test should not fail, however, the config is extreme and using diff --git a/tests/rsf_getenv.sh b/tests/rsf_getenv.sh new file mode 100755 index 00000000..42de20fe --- /dev/null +++ b/tests/rsf_getenv.sh @@ -0,0 +1,17 @@ +# Test for the getenv() rainerscript function +# this is a quick test, but it gurantees that the code path is +# at least progressed (but we do not check for unset envvars!) +# added 2009-11-03 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +# uncomment for debugging support: +echo =============================================================================== +echo \[rsf_getenv.sh\]: testing RainerScript getenv\(\) function +export MSGNUM="msgnum:" +source $srcdir/diag.sh init +source $srcdir/diag.sh startup rsf_getenv.conf +source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1 10000 +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh seq-check 0 9999 +unset MSGNUM +source $srcdir/diag.sh exit diff --git a/tests/rulesetmultiqueue.sh b/tests/rulesetmultiqueue.sh new file mode 100755 index 00000000..aff55148 --- /dev/null +++ b/tests/rulesetmultiqueue.sh @@ -0,0 +1,33 @@ +# Test for disk-only queue mode +# This tests defines three rulesets, each one with its own queue. Then, it +# sends data to them and checks the outcome. Note that we do need to +# use some custom code as the test driver framework does not (yet?) +# support multi-output-file operations. +# added 2009-10-30 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo =============================================================================== +echo \[rulesetmultiqueu.sh\]: testing multiple queues via rulesets +source $srcdir/diag.sh init +rm -f rsyslog.out1.log rsyslog.out2.log rsyslog.out3.log +source $srcdir/diag.sh startup rulesetmultiqueue.conf +source $srcdir/diag.sh wait-startup +# now fill the three files (a bit sequentially, but they should +# still get their share of concurrency - to increase the chance +# we use three connections per set). +source $srcdir/diag.sh tcpflood 127.0.0.1 13514 3 20000 0 +source $srcdir/diag.sh tcpflood 127.0.0.1 13515 3 20000 20000 +source $srcdir/diag.sh tcpflood 127.0.0.1 13516 3 20000 40000 + +# in this version of the imdiag, we do not have the capability to poll +# all queues for emptyness. So we do a sleep in the hopes that this will +# sufficiently drain the queues. This is race, but the best we currently +# can do... - rgerhards, 2009-11-05 +sleep 2 +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh wait-shutdown +# now consolidate all logs into a single one so that we can use the +# regular check logic +cat rsyslog.out1.log rsyslog.out2.log rsyslog.out3.log > rsyslog.out.log +source $srcdir/diag.sh seq-check 0 59999 +rm -f rsyslog.out1.log rsyslog.out2.log rsyslog.out3.log +source $srcdir/diag.sh exit diff --git a/tests/runtime-dummy.c b/tests/runtime-dummy.c index 38e6bba1..5a9039bf 100644 --- a/tests/runtime-dummy.c +++ b/tests/runtime-dummy.c @@ -34,12 +34,13 @@ int repeatinterval = 30; int bActExecWhenPrevSusp = 0; int iActExecOnceInterval = 1; int MarkInterval = 30; +void *pMsgQueue = NULL; void cflineClassic(void) {}; void selectorAddList(void) {}; void selectorConstruct(void) {}; void selectorDestruct(void) {}; -void getFIOPName(void) {}; +rsRetVal createMainQueue(void) { return RS_RET_ERR; } ruleset_t *pCurrRuleset; /* these are required by some dynamically loaded modules */ diff --git a/tests/sndrcv_omudpspoof.sh b/tests/sndrcv_omudpspoof.sh new file mode 100755 index 00000000..bb804d93 --- /dev/null +++ b/tests/sndrcv_omudpspoof.sh @@ -0,0 +1,10 @@ +# This runs sends and receives messages via UDP to the standard +# ports. Note that with UDP we can always have message loss. While this is +# less likely in a local environment, we strongly limit the amount of data +# we send in the hope to not lose any messages. However, failure of this +# test does not necessarily mean that the code is wrong (but it is very likely!) +# added 2009-11-11 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo =============================================================================== +echo \[sndrcv_omudpspoof.sh\]: testing sending and receiving via omudp +source $srcdir/sndrcv_drvr.sh sndrcv_omudpspoof 50 diff --git a/tests/sndrcv_omudpspoof_nonstdpt.sh b/tests/sndrcv_omudpspoof_nonstdpt.sh new file mode 100755 index 00000000..6aeb1a5f --- /dev/null +++ b/tests/sndrcv_omudpspoof_nonstdpt.sh @@ -0,0 +1,10 @@ +# This runs sends and receives messages via UDP to the standard +# ports. Note that with UDP we can always have message loss. While this is +# less likely in a local environment, we strongly limit the amount of data +# we send in the hope to not lose any messages. However, failure of this +# test does not necessarily mean that the code is wrong (but it is very likely!) +# added 2009-11-11 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo =============================================================================== +echo \[sndrcv_omudpspoof_nonstdpt.sh\]: testing sending and receiving via omudp +source $srcdir/sndrcv_drvr.sh sndrcv_omudpspoof_nonstdpt 50 diff --git a/tests/sndrcv_udp.sh b/tests/sndrcv_udp.sh new file mode 100755 index 00000000..274a414a --- /dev/null +++ b/tests/sndrcv_udp.sh @@ -0,0 +1,10 @@ +# This runs sends and receives messages via UDP to the standard +# ports. Note that with UDP we can always have message loss. While this is +# less likely in a local environment, we strongly limit the amount of data +# we send in the hope to not lose any messages. However, failure of this +# test does not necessarily mean that the code is wrong (but it is very likely!) +# added 2009-11-11 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo =============================================================================== +echo \[sndrcv_udp.sh\]: testing sending and receiving via udp +source $srcdir/sndrcv_drvr.sh sndrcv_udp 50 diff --git a/tests/sndrcv_udp_nonstdpt.sh b/tests/sndrcv_udp_nonstdpt.sh new file mode 100755 index 00000000..2ad2906f --- /dev/null +++ b/tests/sndrcv_udp_nonstdpt.sh @@ -0,0 +1,10 @@ +# This runs sends and receives messages via UDP to the non-standard port 2514 +# Note that with UDP we can always have message loss. While this is +# less likely in a local environment, we strongly limit the amount of data +# we send in the hope to not lose any messages. However, failure of this +# test does not necessarily mean that the code is wrong (but it is very likely!) +# added 2009-11-11 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo =============================================================================== +echo \[sndrcv_udp_nonstdpt.sh\]: testing sending and receiving via udp +source $srcdir/sndrcv_drvr.sh sndrcv_udp_nonstdpt 50 diff --git a/tests/testsuites/4.parse1 b/tests/testsuites/4.parse1 new file mode 100644 index 00000000..07e2445a --- /dev/null +++ b/tests/testsuites/4.parse1 @@ -0,0 +1,4 @@ +<29>Jul 31 21:39:21 example-b example-gw[10538]: disconnect host=/192.0.2.1 destination=192.0.2.2/11282 in=3274 out=1448 duration=0 +29,daemon,notice,Jul 31 21:39:21,example-b,example-gw,example-gw[10538]:, disconnect host=/192.0.2.1 destination=192.0.2.2/11282 in=3274 out=1448 duration=0 +# yet another real-life sample where we had some issues with - the important +# part is the dash inside the hostname! diff --git a/tests/testsuites/arrayqueue.conf b/tests/testsuites/arrayqueue.conf new file mode 100644 index 00000000..c5874a83 --- /dev/null +++ b/tests/testsuites/arrayqueue.conf @@ -0,0 +1,14 @@ +# Test for queue fixedArray mode (see .sh file for details) +# rgerhards, 2009-04-17 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +# set spool locations and switch queue to disk-only mode +$MainMsgQueueType FixedArray + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/badqi.conf b/tests/testsuites/badqi.conf new file mode 100644 index 00000000..0ab059df --- /dev/null +++ b/tests/testsuites/badqi.conf @@ -0,0 +1,15 @@ +# Test for bad .qi file (see .sh file for details) +# rgerhards, 2009-10-21 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +# instruct to use bad .qi file +$WorkDirectory bad_qi +$ActionQueueType LinkedList +$ActionQueueFileName dbq +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/da-mainmsg-q.conf b/tests/testsuites/da-mainmsg-q.conf new file mode 100644 index 00000000..843a3e4f --- /dev/null +++ b/tests/testsuites/da-mainmsg-q.conf @@ -0,0 +1,21 @@ +# Test for DA mode in main message queue (see .sh file for details) +# rgerhards, 2009-04-22 +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +$IncludeConfig diag-common.conf + +# set spool locations and switch queue to disk assisted mode +$WorkDirectory test-spool +$MainMsgQueueSize 200 # this *should* trigger moving on to DA mode... +# note: we must set QueueSize sufficiently high, so that 70% (light delay mark) +# is high enough above HighWatermark! +$MainMsgQueueHighWatermark 80 +$MainMsgQueueLowWatermark 40 +$MainMsgQueueFilename mainq +$MainMsgQueueType linkedlist + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/discard.conf b/tests/testsuites/discard.conf new file mode 100644 index 00000000..bbe2fe77 --- /dev/null +++ b/tests/testsuites/discard.conf @@ -0,0 +1,13 @@ +# Test for discard functionality +# rgerhards, 2009-07-30 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +:msg, contains, "00000001" ~ + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/linkedlistqueue.conf b/tests/testsuites/linkedlistqueue.conf new file mode 100644 index 00000000..92a9649c --- /dev/null +++ b/tests/testsuites/linkedlistqueue.conf @@ -0,0 +1,16 @@ +# Test for queue LinkedList mode (see .sh file for details) +# rgerhards, 2009-04-17 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +$ErrorMessagesToStderr off + +# set spool locations and switch queue to disk-only mode +$MainMsgQueueType LinkedList + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/malformed1.parse1 b/tests/testsuites/malformed1.parse1 new file mode 100644 index 00000000..a8825fe8 --- /dev/null +++ b/tests/testsuites/malformed1.parse1 @@ -0,0 +1,6 @@ +<131>Oct 8 23:05:06 10.321.1.123 05",result_code=200,b +131,local0,err,Oct 8 23:05:06,10.321.1.123,05",result_code=200,b,05",result_code=200,b, +# a somewhat mangeld-with real-life sample of a malformed message +# the key here is not what is being parsed, but that we do not abort! +# NOTE: if a parser enhancement breaks the format, this is probably OK +# also note that the above message does NOT contain a MSG part diff --git a/tests/testsuites/omruleset-queue.conf b/tests/testsuites/omruleset-queue.conf new file mode 100644 index 00000000..edc33c40 --- /dev/null +++ b/tests/testsuites/omruleset-queue.conf @@ -0,0 +1,20 @@ +# test for omruleset (see .sh file for details) +# rgerhards, 2009-11-02 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/omruleset/.libs/omruleset +$ModLoad ../plugins/imtcp/.libs/imtcp +$InputTCPServerRun 13514 + +$ruleset rsinclude +# create ruleset main queue with default parameters +$RulesetCreateMainQueue on +# make sure we do not terminate too early! +$MainMsgQueueTimeoutShutdown 10000 +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt + +$ruleset RSYSLOG_DefaultRuleset +$ActionOmrulesetRulesetName rsinclude +*.* :omruleset: diff --git a/tests/testsuites/omruleset.conf b/tests/testsuites/omruleset.conf new file mode 100644 index 00000000..fa6b906e --- /dev/null +++ b/tests/testsuites/omruleset.conf @@ -0,0 +1,16 @@ +# Basic test for omruleset (see .sh file for details) +# rgerhards, 2009-11-02 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/omruleset/.libs/omruleset +$ModLoad ../plugins/imtcp/.libs/imtcp +$InputTCPServerRun 13514 + +$ruleset rsinclude +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt + +$ruleset RSYSLOG_DefaultRuleset +$ActionOmrulesetRulesetName rsinclude +*.* :omruleset: diff --git a/tests/testsuites/parse2.conf b/tests/testsuites/parse2.conf new file mode 100644 index 00000000..04d910bc --- /dev/null +++ b/tests/testsuites/parse2.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format that we can easily parse in expect +$template output,"%PRI%,%syslogfacility-text%,%syslogseverity-text%,%timestamp%,%programname%,%syslogtag%,%msg%\n" +*.* :omstdout:;output diff --git a/tests/testsuites/reallife.parse1 b/tests/testsuites/reallife.parse1 new file mode 100644 index 00000000..a83d2dca --- /dev/null +++ b/tests/testsuites/reallife.parse1 @@ -0,0 +1,12 @@ +# New tests should be added to this file if there is no specific +# reason for not doing that. Initially, we could only handle one test +# case per file, but this restriction has been removed some time ago. +# So it is less troublesome (and easier to overlook) to have all related +# tests in a single file. +# This file contains a lot of real-life samples (of course mangled so +# that they can not be traced back to the original submitter). Note +# that IP addr 192.0.2.1 is specifically set aside for testing and +# documentation by IANA. +# rgerhards, 2009-10-19 +<29>Oct 16 20:47:24 example-p exam-pl[12345]: connect host= /192.0.2.1 +29,daemon,notice,Oct 16 20:47:24,example-p,exam-pl,exam-pl[12345]:, connect host= /192.0.2.1 diff --git a/tests/testsuites/reallife.parse2 b/tests/testsuites/reallife.parse2 new file mode 100644 index 00000000..c42f2526 --- /dev/null +++ b/tests/testsuites/reallife.parse2 @@ -0,0 +1,12 @@ +# New tests should be added to this file if there is no specific +# reason for not doing that. Initially, we could only handle one test +# case per file, but this restriction has been removed some time ago. +# So it is less troublesome (and easier to overlook) to have all related +# tests in a single file. +# This file contains a lot of real-life samples (of course mangled so +# that they can not be traced back to the original submitter). Note +# that IP addr 192.0.2.1 is specifically set aside for testing and +# documentation by IANA. +# rgerhards, 2009-10-19 +<175>Oct 16 23:47:31 #001 MSWinEventLog 0#011Security#01119023582#011Fri Oct 16 16:30:44 2009#011592#011Security#011rgabcde#011User#011Success Audit#011XSXSXSN01#011Detailed Tracking#011#0112572#01119013885 +175,local5,debug,Oct 16 23:47:31,#001,#001, MSWinEventLog 0#011Security#01119023582#011Fri Oct 16 16:30:44 2009#011592#011Security#011rgabcde#011User#011Success Audit#011XSXSXSN01#011Detailed Tracking#011#0112572#01119013885 diff --git a/tests/testsuites/rsf_getenv.conf b/tests/testsuites/rsf_getenv.conf new file mode 100644 index 00000000..2f2eb58c --- /dev/null +++ b/tests/testsuites/rsf_getenv.conf @@ -0,0 +1,17 @@ +# Test for RainerScript getenv() function (see .sh file for details) +# Note envvar MSGNUM must be set to "msgnum:" +# rgerhards, 2009-11-03 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +# set spool locations and switch queue to disk-only mode +$WorkDirectory test-spool +$MainMsgQueueFilename mainq +$MainMsgQueueType disk + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +if $msg contains getenv('MSGNUM') then ?dynfile;outfmt diff --git a/tests/testsuites/rulesetmultiqueue.conf b/tests/testsuites/rulesetmultiqueue.conf new file mode 100644 index 00000000..c8a82dd6 --- /dev/null +++ b/tests/testsuites/rulesetmultiqueue.conf @@ -0,0 +1,34 @@ +# Test for multiple ruleset queues (see .sh file for details) +# rgerhards, 2009-10-30 +$IncludeConfig diag-common.conf +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 + +# general definition +$template outfmt,"%msg:F,58:2%\n" + +# create the individual rulesets +$ruleset file1 +$RulesetCreateMainQueue on +$template dynfile1,"rsyslog.out1.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile1;outfmt + +$ruleset file2 +$RulesetCreateMainQueue on +$template dynfile2,"rsyslog.out2.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile2;outfmt + +$ruleset file3 +$RulesetCreateMainQueue on +$template dynfile3,"rsyslog.out3.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile3;outfmt + +# start listeners and bind them to rulesets +$InputTCPServerBindRuleset file1 +$InputTCPServerRun 13514 + +$InputTCPServerBindRuleset file2 +$InputTCPServerRun 13515 + +$InputTCPServerBindRuleset file3 +$InputTCPServerRun 13516 diff --git a/tests/testsuites/sndrcv_omudpspoof_nonstdpt_rcvr.conf b/tests/testsuites/sndrcv_omudpspoof_nonstdpt_rcvr.conf new file mode 100644 index 00000000..65659f00 --- /dev/null +++ b/tests/testsuites/sndrcv_omudpspoof_nonstdpt_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-12 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imudp/.libs/imudp +# then SENDER sends to this port (not tcpflood!) +$UDPServerRun 2514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_omudpspoof_nonstdpt_sender.conf b/tests/testsuites/sndrcv_omudpspoof_nonstdpt_sender.conf new file mode 100644 index 00000000..29a30145 --- /dev/null +++ b/tests/testsuites/sndrcv_omudpspoof_nonstdpt_sender.conf @@ -0,0 +1,18 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! +$InputTCPServerRun 13514 + +$ModLoad ../plugins/omudpspoof/.libs/omudpspoof +$template spoofaddr,"127.0.0.1" + +#begin action definition +$ActionOMUDPSpoofSourceNameTemplate spoofaddr +$ActionOMUDPSpoofTargetHost 127.0.0.1 +$ActionOMUDPSpoofTargetPort 2514 +$ActionOMUDPSpoofSourcePortStart 514 +$ActionOMUDPSpoofSourcePortEnd 514 +*.* :omudpspoof: diff --git a/tests/testsuites/sndrcv_omudpspoof_rcvr.conf b/tests/testsuites/sndrcv_omudpspoof_rcvr.conf new file mode 100644 index 00000000..e5401811 --- /dev/null +++ b/tests/testsuites/sndrcv_omudpspoof_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-12 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imudp/.libs/imudp +# then SENDER sends to this port (not tcpflood!) +$UDPServerRun 514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_omudpspoof_sender.conf b/tests/testsuites/sndrcv_omudpspoof_sender.conf new file mode 100644 index 00000000..c0d25935 --- /dev/null +++ b/tests/testsuites/sndrcv_omudpspoof_sender.conf @@ -0,0 +1,17 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! +$InputTCPServerRun 13514 + +$ModLoad ../plugins/omudpspoof/.libs/omudpspoof +$template spoofaddr,"127.0.0.1" + +#begin action definition +$ActionOMUDPSpoofSourceNameTemplate spoofaddr +$ActionOMUDPSpoofTargetHost 127.0.0.1 +$ActionOMUDPSpoofSourcePortStart 514 +$ActionOMUDPSpoofSourcePortEnd 514 +*.* :omudpspoof: diff --git a/tests/testsuites/sndrcv_sender.conf b/tests/testsuites/sndrcv_sender.conf index c874c068..f3d6ba53 100644 --- a/tests/testsuites/sndrcv_sender.conf +++ b/tests/testsuites/sndrcv_sender.conf @@ -3,6 +3,7 @@ $IncludeConfig diag-common2.conf $ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! $InputTCPServerRun 13514 *.* @@127.0.0.1:13515 diff --git a/tests/testsuites/sndrcv_udp_nonstdpt_rcvr.conf b/tests/testsuites/sndrcv_udp_nonstdpt_rcvr.conf new file mode 100644 index 00000000..65659f00 --- /dev/null +++ b/tests/testsuites/sndrcv_udp_nonstdpt_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-12 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imudp/.libs/imudp +# then SENDER sends to this port (not tcpflood!) +$UDPServerRun 2514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_udp_nonstdpt_sender.conf b/tests/testsuites/sndrcv_udp_nonstdpt_sender.conf new file mode 100644 index 00000000..2975f938 --- /dev/null +++ b/tests/testsuites/sndrcv_udp_nonstdpt_sender.conf @@ -0,0 +1,9 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! +$InputTCPServerRun 13514 + +*.* @127.0.0.1:2514 diff --git a/tests/testsuites/sndrcv_udp_rcvr.conf b/tests/testsuites/sndrcv_udp_rcvr.conf new file mode 100644 index 00000000..e5401811 --- /dev/null +++ b/tests/testsuites/sndrcv_udp_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-12 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imudp/.libs/imudp +# then SENDER sends to this port (not tcpflood!) +$UDPServerRun 514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_udp_sender.conf b/tests/testsuites/sndrcv_udp_sender.conf new file mode 100644 index 00000000..28e913ef --- /dev/null +++ b/tests/testsuites/sndrcv_udp_sender.conf @@ -0,0 +1,9 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! +$InputTCPServerRun 13514 + +*.* @127.0.0.1 diff --git a/tests/threadingmq.sh b/tests/threadingmq.sh index bdb5f35e..ea5d7837 100755 --- a/tests/threadingmq.sh +++ b/tests/threadingmq.sh @@ -6,7 +6,7 @@ # in practice many threading bugs result in an abort rather quickly and these # should be covered by this test here. # rgerhards, 2009-06-26 -echo TEST: threadingmq.sh - main queue concurrency +echo \[threadingmq.sh\]: main queue concurrency source $srcdir/diag.sh init source $srcdir/diag.sh startup threadingmq.conf source $srcdir/diag.sh injectmsg 0 100000 diff --git a/tests/threadingmqaq.sh b/tests/threadingmqaq.sh index 9f2ea793..83f5fedc 100755 --- a/tests/threadingmqaq.sh +++ b/tests/threadingmqaq.sh @@ -6,7 +6,7 @@ # in practice many threading bugs result in an abort rather quickly and these # should be covered by this test here. # rgerhards, 2009-06-26 -echo TEST: threadingmqaq.sh - main/action queue concurrency +echo \[threadingmqaq.sh\]: main/action queue concurrency source $srcdir/diag.sh init source $srcdir/diag.sh startup threadingmqaq.conf #source $srcdir/diag.sh tcpflood 127.0.0.1 13514 2 100000 diff --git a/tests/timestamp.sh b/tests/timestamp.sh index 7699a4af..71416c33 100755 --- a/tests/timestamp.sh +++ b/tests/timestamp.sh @@ -1,4 +1,4 @@ -echo various timestamp tests +echo \[timestamp.sh\]: various timestamp tests source $srcdir/diag.sh init source $srcdir/diag.sh nettester ts3164 udp source $srcdir/diag.sh nettester ts3164 tcp diff --git a/tests/validation-run.sh b/tests/validation-run.sh index 2e922283..cc29482a 100755 --- a/tests/validation-run.sh +++ b/tests/validation-run.sh @@ -21,6 +21,7 @@ # # A copy of the GPL can be found in the file "COPYING" in this distribution. #set -x +echo \[validation-run.sh\]: testing configuraton validation echo "testing a failed configuration verification run" ../tools/rsyslogd -dn -u2 -c4 -N1 -f$srcdir/testsuites/invalid.conf -M../runtime/.libs:../.libs if [ $? -ne 1 ]; then |