diff options
Diffstat (limited to 'syslogd.c')
-rw-r--r-- | syslogd.c | 420 |
1 files changed, 388 insertions, 32 deletions
@@ -445,7 +445,9 @@ struct msg { int iLenHOSTNAME; /* Length of HOSTNAME */ char *pszRcvFrom; /* System message was received from */ int iLenRcvFrom; /* Length of pszRcvFrom */ + int iProtocolVersion;/* protocol version of message received 0 - legacy, 1 syslog-protocol) */ rsCStrObj *pCSProgName; /* the (BSD) program name */ + rsCStrObj *pCSStrucData;/* STRUCTURED-DATA */ struct syslogTime tRcvdAt;/* time the message entered this program */ char *pszRcvdAt3164; /* time as RFC3164 formatted string (always 15 charcters) */ char *pszRcvdAt3339; /* time as RFC3164 formatted string (32 charcters at most) */ @@ -1597,6 +1599,111 @@ static int srSLMGParseInt32(unsigned char** ppsz) return i; } + + +/** + * Parse a TIMESTAMP-3339. + * updates the parse pointer position. + */ +static int srSLMGParseTIMESTAMP3339(struct syslogTime *pTime, unsigned char** ppszTS) +{ + unsigned char *pszTS = *ppszTS; + + assert(pTime != NULL); + assert(ppszTS != NULL); + assert(pszTS != NULL); + + pTime->year = srSLMGParseInt32(&pszTS); + + /* We take the liberty to accept slightly malformed timestamps e.g. in + * the format of 2003-9-1T1:0:0. This doesn't hurt on receiving. Of course, + * with the current state of affairs, we would never run into this code + * here because at postion 11, there is no "T" in such cases ;) + */ + if(*pszTS++ != '-') + return FALSE; + pTime->month = srSLMGParseInt32(&pszTS); + if(pTime->month < 1 || pTime->month > 12) + return FALSE; + + if(*pszTS++ != '-') + return FALSE; + pTime->day = srSLMGParseInt32(&pszTS); + if(pTime->day < 1 || pTime->day > 31) + return FALSE; + + if(*pszTS++ != 'T') + return FALSE; + + pTime->hour = srSLMGParseInt32(&pszTS); + if(pTime->hour < 0 || pTime->hour > 23) + return FALSE; + + if(*pszTS++ != ':') + return FALSE; + pTime->minute = srSLMGParseInt32(&pszTS); + if(pTime->minute < 0 || pTime->minute > 59) + return FALSE; + + if(*pszTS++ != ':') + return FALSE; + pTime->second = srSLMGParseInt32(&pszTS); + if(pTime->second < 0 || pTime->second > 60) + return FALSE; + + /* Now let's see if we have secfrac */ + if(*pszTS == '.') + { + unsigned char *pszStart = ++pszTS; + pTime->secfrac = srSLMGParseInt32(&pszTS); + pTime->secfracPrecision = (int) (pszTS - pszStart); + } + else + { + pTime->secfracPrecision = 0; + pTime->secfrac = 0; + } + + /* check the timezone */ + if(*pszTS == 'Z') + { + pszTS++; /* eat Z */ + pTime->OffsetMode = 'Z'; + pTime->OffsetHour = 0; + pTime->OffsetMinute = 0; + } + else if((*pszTS == '+') || (*pszTS == '-')) + { + pTime->OffsetMode = *pszTS; + pszTS++; + + pTime->OffsetHour = srSLMGParseInt32(&pszTS); + if(pTime->OffsetHour < 0 || pTime->OffsetHour > 23) + return FALSE; + + if(*pszTS++ != ':') + return FALSE; + pTime->OffsetMinute = srSLMGParseInt32(&pszTS); + if(pTime->OffsetMinute < 0 || pTime->OffsetMinute > 59) + return FALSE; + } + else + /* there MUST be TZ information */ + return FALSE; + + /* OK, we actually have a 3339 timestamp, so let's indicated this */ + if(*pszTS == ' ') + ++pszTS; + else + return FALSE; + + /* update parse pointer */ + *ppszTS = pszTS; + + return TRUE; +} + + /** * Parse a TIMESTAMP-3164. * Returns TRUE on parse OK, FALSE on parse error. @@ -2048,6 +2155,29 @@ static struct msg *MsgAddRef(struct msg *pM) /* Access methods - dumb & easy, not a comment for each ;) */ +static void setProtocolVersion(struct msg *pM, int iNewVersion) +{ + assert(pM != NULL); + if(iNewVersion != 0 && iNewVersion != 1) { + dprintf("Tried to set unsupported protocol version %d - changed to 0.\n", iNewVersion); + iNewVersion = 0; + } + pM->iProtocolVersion = iNewVersion; +} + +static int getProtocolVersion(struct msg *pM) +{ + assert(pM != NULL); + return(pM->iProtocolVersion); +} + +/* note: string is taken from constant pool, do NOT free */ +static char *getProtocolVersionString(struct msg *pM) +{ + assert(pM != NULL); + return(pM->iProtocolVersion ? "1" : "0"); +} + static int getMSGLen(struct msg *pM) { return((pM == NULL) ? 0 : pM->iLenMSG); @@ -2627,6 +2757,8 @@ static char *MsgGetProp(struct msg *pMsg, struct templateEntry *pTpe, pRes = getTimeReported(pMsg, pTpe->data.field.eDateFormat); } else if(!strcmp(pName, "programname")) { pRes = getProgramName(pMsg); + } else if(!strcmp(pName, "PROTOCOL-VERSION")) { + pRes = getProtocolVersionString(pMsg); } else { pRes = "**INVALID PROPERTY NAME**"; } @@ -3671,29 +3803,206 @@ static void enqueueMsg(struct msg *pMsg) #endif /* #ifndef USE_PTHREADS */ -/* - * Log a message to the appropriate log files, users, etc. based on - * the priority. - * rgerhards 2004-11-08: actually, this also decodes all but the PRI part. - * rgerhards 2004-11-09: ... but only, if syslogd could properly be initialized - * if not, we use emergency logging to the console and in - * this case, no further decoding happens. - * changed to no longer receive a plain message but a msg object instead. - * rgerhards-2004-11-16: OK, we are now up to another change... This method - * actually needs to PARSE the message. How exactly this needs to happen depends on - * a number of things. Most importantly, it depends on the source. For example, - * locally received messages (SOURCE_UNIXAF) do NOT have a hostname in them. So - * we need to treat them differntly form network-received messages which have. - * Well, actually not all network-received message really have a hostname. We - * can just hope they do, but we can not be sure. So this method tries to find - * whatever can be found in the message and uses that... Obviously, there is some - * potential for misinterpretation, which we simply can not solve under the - * circumstances given. +/* Helper to parseRFCSyslogMsg. This function parses a field up to + * (and including) the SP character after it. The field contents is + * returned in a caller-provided buffer. The parsepointer is advanced + * to after the terminating SP. The caller must ensure that the + * provided buffer is large enough to hold the to be extracted value. + * Returns 0 if everything is fine or 1 if either the field is not + * SP-terminated or any other error occurs. + * rger, 2005-11-24 */ -void logmsg(int pri, struct msg *pMsg, int flags) +static int parseRFCField(char **pp2parse, char *pResult) +{ + char *p2parse; + int iRet = 0; + + assert(pp2parse != NULL); + assert(*pp2parse != NULL); + assert(pResult != NULL); + + p2parse = *pp2parse; + + /* this is the actual parsing loop */ + while(*p2parse && *p2parse != ' ') { + *pResult++ = *p2parse++; + } + + if(*p2parse == ' ') + ++p2parse; /* eat SP, but only if not at end of string */ + else + iRet = 1; /* there MUST be an SP! */ + *pResult = '\0'; + + /* set the new parse pointer */ + *pp2parse = p2parse; + return 0; +} + + +/* Helper to parseRFCSyslogMsg. This function parses the structured + * data field of a message. It does NOT parse inside structured data, + * just gets the field as whole. Parsing the single entities is left + * to other functions. The parsepointer is advanced + * to after the terminating SP. The caller must ensure that the + * provided buffer is large enough to hold the to be extracted value. + * Returns 0 if everything is fine or 1 if either the field is not + * SP-terminated or any other error occurs. + * rger, 2005-11-24 + */ +static int parseRFCStructuredData(char **pp2parse, char *pResult) +{ + char *p2parse; + int bCont = 1; + int iRet = 0; + + assert(pp2parse != NULL); + assert(*pp2parse != NULL); + assert(pResult != NULL); + + p2parse = *pp2parse; + + /* this is the actual parsing loop + * Remeber: structured data starts with [ and includes any characters + * until the first ] followed by a SP. There may be spaces inside + * structured data. There may also be \] inside the structured data, which + * do NOT terminate an element. + */ + if(*p2parse != '[') + return 1; /* this is NOT structured data! */ + + while(bCont) { + if(*p2parse == '\0') { + iRet = 1; /* this is not valid! */ + bCont = 0; + } else if(*p2parse == '\\' && *(p2parse+1) == ']') { + /* this is escaped, need to copy both */ + *pResult++ = *p2parse++; + *pResult++ = *p2parse++; + } else if(*p2parse == ']' && *(p2parse+1) == ' ') { + /* found end, just need to copy the ] and eat the SP */ + *pResult++ = *p2parse; + p2parse += 2; + bCont = 0; + } else { + *pResult++ = *p2parse++; + } + } + + if(*p2parse == ' ') + ++p2parse; /* eat SP, but only if not at end of string */ + else + iRet = 1; /* there MUST be an SP! */ + *pResult = '\0'; + + /* set the new parse pointer */ + *pp2parse = p2parse; + return 0; +} + +/* parse a RFC-formatted syslog message. This function returns + * 0 if processing of the message shall continue and 1 if something + * went wrong and this messe should be ignored. This function has been + * implemented in the effort to support syslog-protocol. Please note that + * the name (parse *RFC*) stems from the hope that syslog-protocol will + * some time become an RFC. Do not confuse this with informational + * RFC 3164 (which is legacy syslog). + * + * currently supported format: + * + * <PRI>VERSION SP TIMESTAMP SP HOSTNAME SP APP-NAME SP PROCID SP MSGID SP [SD-ID]s SP MSG + * + * <PRI> is already stripped when this function is entered. VERSION already + * has been confirmed to be "1", but has NOT been stripped from the message. + * + * rger, 2005-11-24 + */ +static int parseRFCSyslogMsg(struct msg *pMsg, int flags) +{ + char *p2parse; + char *pBuf; + int bContParse = 1; + + assert(pMsg != NULL); + assert(pMsg->pszUxTradMsg != NULL); + p2parse = pMsg->pszUxTradMsg; + + /* do a sanity check on the version and eat it */ + assert(p2parse[0] == '1' && p2parse[1] == ' '); + p2parse += 2; + + /* Now get us some memory we can use as a work buffer while parsing. + * We simply allocated a buffer sufficiently large to hold all of the + * message, so we can not run into any troubles. I think this is + * more wise then to use individual buffers. + */ + if((pBuf = malloc(sizeof(char)* strlen(p2parse) + 1)) == NULL) + return 1; + + /* TIMESTAMP */ + if(srSLMGParseTIMESTAMP3339(&(pMsg->tTIMESTAMP), (unsigned char **) &p2parse) == FALSE) { + dprintf("no TIMESTAMP detected!\n"); + bContParse = 0; + flags |= ADDDATE; + } + + if (flags & ADDDATE) { + getCurrTime(&(pMsg->tTIMESTAMP)); /* use the current time! */ + } + + /* HOSTNAME */ + if(bContParse) { + parseRFCField(&p2parse, pBuf); +dprintf("HOSTNAME: '%s'\n", pBuf); + MsgAssignHOSTNAME(pMsg, pBuf); + } else { + /* we can not parse, so we get the system we + * received the data from. + */ + MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); + } + + /* APP-NAME */ + if(bContParse) { + parseRFCField(&p2parse, pBuf); +dprintf("APP-NAME: '%s'\n", pBuf); + // MsgAssignHOSTNAME(pMsg, pBuf); + } + + /* PROCID */ + if(bContParse) { + parseRFCField(&p2parse, pBuf); +dprintf("PROCID: '%s'\n", pBuf); + // MsgAssignHOSTNAME(pMsg, pBuf); + } + + /* MSGID */ + if(bContParse) { + parseRFCField(&p2parse, pBuf); +dprintf("MSGID: '%s'\n", pBuf); + // MsgAssignHOSTNAME(pMsg, pBuf); + } + + /* STRUCTURED-DATA */ + if(bContParse) { + parseRFCStructuredData(&p2parse, pBuf); +dprintf("STRUCTURED-DATA: '%s'\n", pBuf); + // MsgAssignHOSTNAME(pMsg, pBuf); + } + + /* MSG */ + if(MsgSetMSG(pMsg, p2parse) != 0) return 1; + + return 0; /* all ok */ +} +/* parse a legay-formatted syslog message. This function returns + * 0 if processing of the message shall continue and 1 if something + * went wrong and this messe should be ignored. This function has been + * implemented in the effort to support syslog-protocol. + * rger, 2005-11-24 + */ +static int parseLegacySyslogMsg(struct msg *pMsg, int flags) { - /* allocate next entry and add it */ - char *msg; char *p2parse; char *pBuf; char *pWork; @@ -3704,18 +4013,12 @@ void logmsg(int pri, struct msg *pMsg, int flags) assert(pMsg != NULL); assert(pMsg->pszUxTradMsg != NULL); - msg = pMsg->pszUxTradMsg; - dprintf("logmsg: %s, flags %x, from '%s', msg %s\n", textpri(pri), flags, getRcvFrom(pMsg), msg); + p2parse = pMsg->pszUxTradMsg; -#ifndef SYSV - omask = sigblock(sigmask(SIGHUP)|sigmask(SIGALRM)); -#endif - - p2parse = msg; /* our "message" begins here */ /* * Check to see if msg contains a timestamp */ - if(srSLMGParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), msg) == TRUE) + if(srSLMGParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), p2parse) == TRUE) p2parse += 16; else { bContParse = 0; @@ -3748,7 +4051,7 @@ void logmsg(int pri, struct msg *pMsg, int flags) if(bContParse) { /* TODO: quick and dirty memory allocation */ if((pBuf = malloc(sizeof(char)* strlen(p2parse) +1)) == NULL) - return; + return 1; pWork = pBuf; /* this is the actual parsing loop */ while(*p2parse && *p2parse != ' ' && *p2parse != ':') { @@ -3803,7 +4106,7 @@ void logmsg(int pri, struct msg *pMsg, int flags) if(bContParse && !bTAGCharDetected) { char *pszTAG; if((pStrB = rsCStrConstruct()) == NULL) - return; + return 1; rsCStrSetAllocIncrement(pStrB, 33); pWork = pBuf; iCnt = 0; @@ -3841,7 +4144,59 @@ void logmsg(int pri, struct msg *pMsg, int flags) } /* The rest is the actual MSG */ - if(MsgSetMSG(pMsg, p2parse) != 0) return; + if(MsgSetMSG(pMsg, p2parse) != 0) return 1; + + return 0; /* all ok */ +} + + +/* + * Log a message to the appropriate log files, users, etc. based on + * the priority. + * rgerhards 2004-11-08: actually, this also decodes all but the PRI part. + * rgerhards 2004-11-09: ... but only, if syslogd could properly be initialized + * if not, we use emergency logging to the console and in + * this case, no further decoding happens. + * changed to no longer receive a plain message but a msg object instead. + * rgerhards-2004-11-16: OK, we are now up to another change... This method + * actually needs to PARSE the message. How exactly this needs to happen depends on + * a number of things. Most importantly, it depends on the source. For example, + * locally received messages (SOURCE_UNIXAF) do NOT have a hostname in them. So + * we need to treat them differntly form network-received messages which have. + * Well, actually not all network-received message really have a hostname. We + * can just hope they do, but we can not be sure. So this method tries to find + * whatever can be found in the message and uses that... Obviously, there is some + * potential for misinterpretation, which we simply can not solve under the + * circumstances given. + */ +void logmsg(int pri, struct msg *pMsg, int flags) +{ + char *msg; + + assert(pMsg != NULL); + assert(pMsg->pszUxTradMsg != NULL); + msg = pMsg->pszUxTradMsg; + dprintf("logmsg: %s, flags %x, from '%s', msg %s\n", textpri(pri), flags, getRcvFrom(pMsg), msg); + +#ifndef SYSV + omask = sigblock(sigmask(SIGHUP)|sigmask(SIGALRM)); +#endif + /* rger 2005-11-24 (happy thanksgiving!): we now need to check if we have + * a traditional syslog message or one formatted according to syslog-protocol. + * We need to apply different parsers depending on that. We use the + * -protocol VERSION field for the detection. + */ + if(msg[0] == '1' && msg[1] == ' ') { + dprintf("Message has syslog-protocol format.\n"); + setProtocolVersion(pMsg, 1); + if(parseRFCSyslogMsg(pMsg, flags) == 1) + return; + } else { /* we have legacy syslog */ + dprintf("Message has legacy syslog format.\n"); + setProtocolVersion(pMsg, 0); + if(parseLegacySyslogMsg(pMsg, flags) == 1) + return; + } /* ---------------------- END PARSING ---------------- */ @@ -7402,6 +7757,7 @@ int main(int argc, char **argv) return 0; } + /* * Local variables: * c-indent-level: 8 |