diff options
Diffstat (limited to 'syslogd.c')
| -rw-r--r-- | syslogd.c | 312 |
1 files changed, 213 insertions, 99 deletions
@@ -302,6 +302,7 @@ static int bEscapeCCOnRcv = 1; /* escape control characters on reception: 0 - n int bReduceRepeatMsgs; /* reduce repeated message - 0 - no, 1 - yes */ int bActExecWhenPrevSusp; /* execute action only when previous one was suspended? */ uchar *pszWorkDir = NULL;/* name of rsyslog's spool directory (without trailing slash) */ +uchar *glblModPath = NULL; /* module load path - only used during initial init, only settable via -M command line option */ /* end global config file state variables */ char LocalHostName[MAXHOSTNAMELEN+1];/* our hostname - read-only after startup */ @@ -338,8 +339,10 @@ static int iMainMsgQtoEnq = 2000; /* timeout for queue enque */ static int iMainMsgQtoWrkShutdown = 60000; /* timeout for worker thread shutdown */ static int iMainMsgQWrkMinMsgs = 100; /* minimum messages per worker needed to start a new one */ static int iMainMsgQDeqSlowdown = 0; /* dequeue slowdown (simple rate limiting) */ -static int bMainMsgQSaveOnShutdown = 1; /* save queue on shutdown (when DA enabled)? */ static int64 iMainMsgQueMaxDiskSpace = 0; /* max disk space allocated 0 ==> unlimited */ +static int bMainMsgQSaveOnShutdown = 1; /* save queue on shutdown (when DA enabled)? */ +static int iMainMsgQueueDeqtWinFromHr = 0; /* hour begin of time frame when queue is to be dequeued */ +static int iMainMsgQueueDeqtWinToHr = 25; /* hour begin of time frame when queue is to be dequeued */ /* support for simple textual representation of FIOP names @@ -2196,8 +2199,7 @@ init(void) pDfltProgNameCmp = NULL; eDfltHostnameCmpMode = HN_NO_COMP; - dbgprintf("rsyslog %s.\n", VERSION); - dbgprintf("Called init.\n"); + dbgprintf("rsyslog %s - called init()\n", VERSION); /* delete the message queue, which also flushes all messages left over */ if(pMsgQueue != NULL) { @@ -2320,6 +2322,8 @@ init(void) setQPROP(queueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", iMainMsgQWrkMinMsgs); setQPROP(queueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", bMainMsgQSaveOnShutdown); setQPROP(queueSetiDeqSlowdown, "$MainMsgQueueDequeueSlowdown", iMainMsgQDeqSlowdown); + setQPROP(queueSetiDeqtWinFromHr, "$MainMsgQueueDequeueTimeBegin", iMainMsgQueueDeqtWinFromHr); + setQPROP(queueSetiDeqtWinToHr, "$MainMsgQueueDequeueTimeEnd", iMainMsgQueueDeqtWinToHr); # undef setQPROP # undef setQPROPstr @@ -2684,6 +2688,8 @@ static rsRetVal loadBuildInModules(void) CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuemaxfilesize", 0, eCmdHdlrSize, NULL, &iMainMsgQueMaxFileSize, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuemaxdiskspace", 0, eCmdHdlrSize, NULL, &iMainMsgQueMaxDiskSpace, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuesaveonshutdown", 0, eCmdHdlrBinary, NULL, &bMainMsgQSaveOnShutdown, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuetimebegin", 0, eCmdHdlrInt, NULL, &iMainMsgQueueDeqtWinFromHr, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"mainmsgqueuedequeuetimeend", 0, eCmdHdlrInt, NULL, &iMainMsgQueueDeqtWinToHr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"repeatedmsgreduction", 0, eCmdHdlrBinary, NULL, &bReduceRepeatMsgs, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionexeconlywhenpreviousissuspended", 0, eCmdHdlrBinary, NULL, &bActExecWhenPrevSusp, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionresumeinterval", 0, eCmdHdlrInt, setActionResumeInterval, NULL, NULL)); @@ -2763,21 +2769,6 @@ static void mainThread() BEGINfunc uchar *pTmp; -#if 0 // code moved back to main() - /* doing some core initializations */ - if((iRet = modInitIminternal()) != RS_RET_OK) { - fprintf(stderr, "fatal error: could not initialize errbuf object (error code %d).\n", - iRet); - exit(1); /* "good" exit, leaving at init for fatal error */ - } - - if((iRet = loadBuildInModules()) != RS_RET_OK) { - fprintf(stderr, "fatal error: could not activate built-in modules. Error code %d.\n", - iRet); - exit(1); /* "good" exit, leaving at init for fatal error */ - } -#endif - /* Note: signals MUST be processed by the thread this code is running in. The reason * is that we need to interrupt the select() system call. -- rgerhards, 2007-10-17 */ @@ -2802,7 +2793,6 @@ static void mainThread() pTmp = template_StdPgSQLFmt; tplLastStaticInit(tplAddLine(" StdPgSQLFmt", &pTmp)); - dbgprintf("Starting.\n"); init(); if(Debug) { dbgprintf("Debugging enabled, SIGUSR1 to turn off debugging.\n"); @@ -2819,6 +2809,7 @@ static void mainThread() * do the init() and then restart things. * rgerhards, 2005-10-24 */ + dbgprintf("initialization completed, transitioning to regular run mode\n"); mainloop(); ENDfunc @@ -2970,6 +2961,72 @@ GlobalClassExit(void) } +/* some support for command line option parsing. Any non-trivial options must be + * buffered until the complete command line has been parsed. This is necessary to + * prevent dependencies between the options. That, in turn, means we need to have + * something that is capable of buffering options and there values. The follwing + * functions handle that. + * rgerhards, 2008-04-04 + */ +typedef struct bufOpt { + struct bufOpt *pNext; + char optchar; + char *arg; +} bufOpt_t; +static bufOpt_t *bufOptRoot = NULL; +static bufOpt_t *bufOptLast = NULL; + +/* add option buffer */ +static rsRetVal +bufOptAdd(char opt, char *arg) +{ + DEFiRet; + bufOpt_t *pBuf; + + if((pBuf = malloc(sizeof(bufOpt_t))) == NULL) + ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); + + pBuf->optchar = opt; + pBuf->arg = arg; + pBuf->pNext = NULL; + + if(bufOptLast == NULL) { + bufOptRoot = pBuf; /* then there is also no root! */ + } else { + bufOptLast->pNext = pBuf; + } + bufOptLast = pBuf; + +finalize_it: + RETiRet; +} + + + +/* remove option buffer from top of list, return values and destruct buffer itself. + * returns RS_RET_END_OF_LINKEDLIST when no more options are present. + * (we use int *opt instead of char *opt to keep consistent with getopt()) + */ +static rsRetVal +bufOptRemove(int *opt, char **arg) +{ + DEFiRet; + bufOpt_t *pBuf; + + if(bufOptRoot == NULL) + ABORT_FINALIZE(RS_RET_END_OF_LINKEDLIST); + pBuf = bufOptRoot; + + *opt = pBuf->optchar; + *arg = pBuf->arg; + + bufOptRoot = pBuf->pNext; + free(pBuf); + +finalize_it: + RETiRet; +} + /* This is the main entry point into rsyslogd. Over time, we should try to * modularize it a bit more... @@ -2989,15 +3046,125 @@ int realMain(int argc, char **argv) int bIsFirstOption = 1; int bEOptionWasGiven = 0; int bImUxSockLoaded = 0; /* already generated a $ModLoad imuxsock? */ + char *arg; /* for command line option processing */ uchar legacyConfLine[80]; + /* first, parse the command line options. We do not carry out any actual work, just + * see what we should do. This relieves us from certain anomalies and we can process + * the parameters down below in the correct order. For example, we must know the + * value of -M before we can do the init, but at the same time we need to have + * the base classes init before we can process most of the options. Now, with the + * split of functionality, this is no longer a problem. Thanks to varmofekoj for + * suggesting this algo. + * Note: where we just need to set some flags and can do so without knowledge + * of other options, we do this during the inital option processing. With later + * versions (if a dependency on -c option is introduced), we must move that code + * to other places, but I think it is quite appropriate and saves code to do this + * only when actually neeeded. + * rgerhards, 2008-04-04 + */ + while ((ch = getopt(argc, argv, "46Ac:dehi:f:g:l:m:M:nqQr::s:t:u:vwx")) != EOF) { + switch((char)ch) { + case '4': + case '6': + case 'A': + case 'a': + case 'f': /* configuration file */ + case 'h': + case 'i': /* pid file name */ + case 'l': + case 'm': /* mark interval */ + case 'n': /* don't fork */ + case 'o': + case 'p': + case 'q': /* add hostname if DNS resolving has failed */ + case 'Q': /* dont resolve hostnames in ACL to IPs */ + case 's': + case 'u': /* misc user settings */ + case 'w': /* disable disallowed host warnigs */ + case 'x': /* disable dns for remote messages */ + CHKiRet(bufOptAdd(ch, optarg)); + break; + case 'c': /* compatibility mode */ + if(!bIsFirstOption) { + fprintf(stderr, "-c option MUST be specified as the first option - aborting...\n"); + usage(); + exit(1); + } + iCompatibilityMode = atoi(optarg); + break; + case 'd': /* debug - must be handled now, so that debug is active during init! */ + Debug = 1; + break; + case 'e': /* log every message (no repeat message supression) */ + fprintf(stderr, "note: -e option is no longer supported, every message is now logged by default\n"); + bEOptionWasGiven = 1; + break; + case 'g': /* enable tcp gssapi logging */ +#if defined(SYSLOG_INET) && defined(USE_GSSAPI) + CHKiRet(bufOptAdd('g', optarg)); +#else + fprintf(stderr, "rsyslogd: -g not valid - not compiled with gssapi support"); +#endif + break; + case 'M': /* default module load path -- this MUST be carried out immediately! */ + glblModPath = (uchar*) optarg; + break; + case 'r': /* accept remote messages */ +#ifdef SYSLOG_INET + CHKiRet(bufOptAdd(ch, optarg)); +#else + fprintf(stderr, "rsyslogd: -r not valid - not compiled with network support\n"); +#endif + break; + case 't': /* enable tcp logging */ +#ifdef SYSLOG_INET + CHKiRet(bufOptAdd(ch, optarg)); +#else + fprintf(stderr, "rsyslogd: -t not valid - not compiled with network support\n"); +#endif + break; + case 'v': /* MUST be carried out immediately! */ + printVersion(); + exit(0); /* exit for -v option - so this is a "good one" */ + case '?': + default: + usage(); + } + bIsFirstOption = 0; /* we already saw an option character */ + } + + if ((argc -= optind)) + usage(); + + dbgprintf("rsyslogd %s startup, compatibility mode %d, module path '%s'\n", + VERSION, iCompatibilityMode, glblModPath == NULL ? "" : (char*)glblModPath); + + /* we are done with the initial option parsing and processing. Now we init the system. */ + + ppid = getpid(); + + if(chdir ("/") != 0) + fprintf(stderr, "Can not do 'cd /' - still trying to run\n"); + + CHKiRet_Hdlr(InitGlobalClasses()) { + fprintf(stderr, "rsyslogd initializiation failed - global classes could not be initialized.\n" + "Did you do a \"make install\"?\n" + "Suggested action: run rsyslogd with -d -n options to see what exactly " + "fails.\n"); + FINALIZE; + } + + /* doing some core initializations */ + + /* get our host and domain names - we need to do this early as we may emit + * error log messages, which need the correct hostname. -- rgerhards, 2008-04-04 + */ gethostname(LocalHostName, sizeof(LocalHostName)); - if ( (p = strchr(LocalHostName, '.')) ) { + if((p = strchr(LocalHostName, '.'))) { *p++ = '\0'; LocalDomain = p; - } - else - { + } else { LocalDomain = ""; /* It's not clearly defined whether gethostname() @@ -3025,21 +3192,11 @@ int realMain(int argc, char **argv) } } - /* Convert to lower case to recognize the correct domain laterly - */ - for (p = (char *)LocalDomain; *p ; p++) - if (isupper((int) *p)) - *p = (char)tolower((int)*p); + /* Convert to lower case to recognize the correct domain laterly */ + for (p = (char *)LocalDomain ; *p ; p++) + *p = (char)tolower((int)*p); - CHKiRet_Hdlr(InitGlobalClasses()) { - fprintf(stderr, "rsyslogd initializiation failed - global classes could not be initialized.\n" - "Did you do a \"make install\"?\n" - "Suggested action: run rsyslogd with -d -n options to see what exactly " - "fails.\n"); - FINALIZE; - } - - /* doing some core initializations */ + /* initialize the objects */ if((iRet = modInitIminternal()) != RS_RET_OK) { fprintf(stderr, "fatal error: could not initialize errbuf object (error code %d).\n", iRet); @@ -3052,14 +3209,10 @@ int realMain(int argc, char **argv) exit(1); /* "good" exit, leaving at init for fatal error */ } - ppid = getpid(); - - if(chdir ("/") != 0) - fprintf(stderr, "Can not do 'cd /' - still trying to run\n"); + /* END core initializations - we now come back to carrying out command line options*/ - /* END core initializations */ - - while ((ch = getopt(argc, argv, "46Ac:dehi:f:g:l:m:M:nqQr::s:t:u:vwx")) != EOF) { + while((iRet = bufOptRemove(&ch, &arg)) == RS_RET_OK) { + dbgprintf("deque option %c, optarg '%s'\n", ch, arg); switch((char)ch) { case '4': family = PF_INET; @@ -3076,39 +3229,20 @@ int realMain(int argc, char **argv) legacyOptsEnq((uchar *) "ModLoad imuxsock"); bImUxSockLoaded = 1; } - snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "addunixlistensocket %s", optarg); + snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "addunixlistensocket %s", arg); legacyOptsEnq(legacyConfLine); } else { fprintf(stderr, "error -a is no longer supported, use module imuxsock instead"); } break; - case 'c': /* compatibility mode */ - if(!bIsFirstOption) { - fprintf(stderr, "-c option MUST be specified as the first option - aborting...\n"); - usage(); - exit(1); - } - iCompatibilityMode = atoi(optarg); - break; - case 'd': /* debug */ - Debug = 1; - break; - case 'e': /* log every message (no repeat message supression) */ - fprintf(stderr, "note: -e option is no longer supported, every message is now logged by default\n"); - bEOptionWasGiven = 1; - break; case 'f': /* configuration file */ - ConfFile = (uchar*) optarg; + ConfFile = (uchar*) arg; break; case 'g': /* enable tcp gssapi logging */ -#if defined(SYSLOG_INET) && defined(USE_GSSAPI) if(iCompatibilityMode < 3) { - legacyOptsParseTCP(ch, optarg); + legacyOptsParseTCP(ch, arg); } else fprintf(stderr, "-g option only supported in compatibility modes 0 to 2 - ignored\n"); -#else - fprintf(stderr, "rsyslogd: -g not valid - not compiled with gssapi support"); -#endif break; case 'h': if(iCompatibilityMode < 3) { @@ -3118,25 +3252,22 @@ int realMain(int argc, char **argv) } break; case 'i': /* pid file name */ - PidFile = optarg; + PidFile = arg; break; case 'l': if (LocalHosts) { fprintf (stderr, "rsyslogd: Only one -l argument allowed, the first one is taken.\n"); } else { - LocalHosts = crunch_list(optarg); + LocalHosts = crunch_list(arg); } break; case 'm': /* mark interval */ if(iCompatibilityMode < 3) { - MarkInterval = atoi(optarg) * 60; + MarkInterval = atoi(arg) * 60; } else fprintf(stderr, "-m option only supported in compatibility modes 0 to 2 - ignored\n"); break; - case 'M': /* default module load path */ - module.SetModDir((uchar*)optarg); - break; case 'n': /* don't fork */ NoFork = 1; break; @@ -3157,7 +3288,7 @@ int realMain(int argc, char **argv) legacyOptsEnq((uchar *) "ModLoad imuxsock"); bImUxSockLoaded = 1; } - snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "SystemLogSocketName %s", optarg); + snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "SystemLogSocketName %s", arg); legacyOptsEnq(legacyConfLine); } else { fprintf(stderr, "error -p is no longer supported, use module imuxsock instead"); @@ -3169,42 +3300,30 @@ int realMain(int argc, char **argv) *net.pACLDontResolve = 1; break; case 'r': /* accept remote messages */ -#ifdef SYSLOG_INET if(iCompatibilityMode < 3) { legacyOptsEnq((uchar *) "ModLoad imudp"); - snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "UDPServerRun %s", optarg); + snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "UDPServerRun %s", arg); legacyOptsEnq(legacyConfLine); } else - fprintf(stderr, - "-r option only supported in compatibility modes 0 to 2 - ignored\n"); -#else - fprintf(stderr, "rsyslogd: -r not valid - not compiled with network support\n"); -#endif + fprintf(stderr, "-r option only supported in compatibility modes 0 to 2 - ignored\n"); break; case 's': if (StripDomains) { fprintf (stderr, "rsyslogd: Only one -s argument allowed, the first one is taken.\n"); } else { - StripDomains = crunch_list(optarg); + StripDomains = crunch_list(arg); } break; case 't': /* enable tcp logging */ -#ifdef SYSLOG_INET if(iCompatibilityMode < 3) { - legacyOptsParseTCP(ch, optarg); + legacyOptsParseTCP(ch, arg); } else fprintf(stderr, "-t option only supported in compatibility modes 0 to 2 - ignored\n"); -#else - fprintf(stderr, "rsyslogd: -t not valid - not compiled with network support\n"); -#endif break; case 'u': /* misc user settings */ - if(atoi(optarg) == 1) + if(atoi(arg) == 1) bParseHOSTNAMEandTAG = 0; break; - case 'v': - printVersion(); - exit(0); /* exit for -v option - so this is a "good one" */ case 'w': /* disable disallowed host warnigs */ option_DisallowWarning = 0; break; @@ -3215,15 +3334,12 @@ int realMain(int argc, char **argv) default: usage(); } - bIsFirstOption = 0; /* we already saw an option character */ } - if ((argc -= optind)) - usage(); + if(iRet != RS_RET_END_OF_LINKEDLIST) + FINALIZE; - /* TODO: this should go away at a reasonable stage of v3 development. - * rgerhards, 2007-12-19 - */ + /* process compatibility mode settings */ if(iCompatibilityMode < 3) { errmsg.LogError(NO_ERRCODE, "WARNING: rsyslogd is running in compatibility mode. Automatically " "generated config directives may interfer with your rsyslog.conf settings. " @@ -3249,7 +3365,7 @@ int realMain(int argc, char **argv) checkPermissions(); thrdInit(); - if ( !(Debug || NoFork) ) + if( !(Debug || NoFork) ) { dbgprintf("Checking pidfile.\n"); if (!check_pid(PidFile)) @@ -3288,8 +3404,6 @@ int realMain(int argc, char **argv) else debugging_on = 1; - dbgprintf("Compatibility Mode: %d\n", iCompatibilityMode); - /* tuck my process id away */ dbgprintf("Writing pidfile %s.\n", PidFile); if (!check_pid(PidFile)) |