diff options
Diffstat (limited to 'runtime/rsyslog.h')
| -rw-r--r-- | runtime/rsyslog.h | 341 |
1 files changed, 341 insertions, 0 deletions
diff --git a/runtime/rsyslog.h b/runtime/rsyslog.h new file mode 100644 index 00000000..c06b01c3 --- /dev/null +++ b/runtime/rsyslog.h @@ -0,0 +1,341 @@ +/* This is the header file for the rsyslog runtime. It must be included + * if someone intends to use the runtime. + * + * Begun 2005-09-15 RGerhards + * + * Copyright (C) 2005-2008 by Rainer Gerhards and Adiscon GmbH + * + * This file is part of the rsyslog runtime library. + * + * The rsyslog runtime library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * The rsyslog runtime library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with the rsyslog runtime library. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + * A copy of the LGPL can be found in the file "COPYING.LESSER" in this distribution. + */ +#ifndef INCLUDED_RSYSLOG_H +#define INCLUDED_RSYSLOG_H + +/* ############################################################# * + * # Config Settings # * + * ############################################################# */ +#define RS_STRINGBUF_ALLOC_INCREMENT 128 + +/* ############################################################# * + * # End Config Settings # * + * ############################################################# */ + +#ifndef NOLARGEFILE +# undef _LARGEFILE_SOURCE +# undef _LARGEFILE64_SOURCE +# undef _FILE_OFFSET_BITS +# define _LARGEFILE_SOURCE +# define _LARGEFILE64_SOURCE +# define _FILE_OFFSET_BITS 64 +#endif + +/* portability: not all platforms have these defines, so we + * define them here if they are missing. -- rgerhards, 2008-03-04 + */ +#ifndef LOG_MAKEPRI +# define LOG_MAKEPRI(fac, pri) (((fac) << 3) | (pri)) +#endif +#ifndef LOG_PRI +# define LOG_PRI(p) ((p) & LOG_PRIMASK) +#endif +#ifndef LOG_FAC +# define LOG_FAC(p) (((p) & LOG_FACMASK) >> 3) +#endif + + +/* define some base data types */ +typedef unsigned char uchar;/* get rid of the unhandy "unsigned char" */ +typedef struct thrdInfo thrdInfo_t; +typedef struct obj_s obj_t; +typedef struct filed selector_t;/* TODO: this so far resides in syslogd.c, think about modularization */ +typedef struct NetAddr netAddr_t; +typedef struct netstrms_s netstrms_t; +typedef struct netstrm_s netstrm_t; +typedef struct nssel_s nssel_t; +typedef enum nsdsel_waitOp_e nsdsel_waitOp_t; +typedef struct nsd_ptcp_s nsd_ptcp_t; +typedef struct nsd_gtls_s nsd_gtls_t; +typedef struct nsd_gsspi_s nsd_gsspi_t; +typedef struct nsd_nss_s nsd_nss_t; +typedef struct nsdsel_ptcp_s nsdsel_ptcp_t; +typedef struct nsdsel_gtls_s nsdsel_gtls_t; +typedef obj_t nsd_t; +typedef obj_t nsdsel_t; +typedef struct msg msg_t; +typedef struct interface_s interface_t; +typedef struct objInfo_s objInfo_t; +typedef enum rsRetVal_ rsRetVal; /**< friendly type for global return value */ +typedef rsRetVal (*errLogFunc_t)(uchar*); /* this is a trick to store a function ptr to a function returning a function ptr... */ +typedef struct permittedPeers_s permittedPeers_t; /* this should go away in the long term -- rgerhards, 2008-05-19 */ +typedef struct tcpsrv_s tcpsrv_t; + +/* some universal 64 bit define... */ +typedef long long int64; +typedef long long unsigned uint64; +typedef int64 number_t; /* type to use for numbers - TODO: maybe an autoconf option? */ + +#ifdef __hpux +typedef unsigned int u_int32_t; /* TODO: is this correct? */ +typedef int socklen_t; +#endif + +/* settings for flow control + * TODO: is there a better place for them? -- rgerhards, 2008-03-14 + */ +typedef enum { + eFLOWCTL_NO_DELAY = 0, /**< UDP and other non-delayable sources */ + eFLOWCTL_LIGHT_DELAY = 1, /**< some light delay possible, but no extended period of time */ + eFLOWCTL_FULL_DELAY = 2 /**< delay possible for extended period of time */ +} flowControl_t; + + +/* The error codes below are orginally "borrowed" from + * liblogging. As such, we reserve values up to -2999 + * just in case we need to borrow something more ;) +*/ +enum rsRetVal_ /** return value. All methods return this if not specified otherwise */ +{ + RS_RET_NOT_IMPLEMENTED = -7, /**< implementation is missing (probably internal error or lazyness ;)) */ + RS_RET_OUT_OF_MEMORY = -6, /**< memory allocation failed */ + RS_RET_PROVIDED_BUFFER_TOO_SMALL = -50,/**< the caller provided a buffer, but the called function sees the size of this buffer is too small - operation not carried out */ + RS_RET_TRUE = -1, /**< to indicate a true state (can be used as TRUE, legacy) */ + RS_RET_FALSE = -2, /**< to indicate a false state (can be used as FALSE, legacy) */ + RS_RET_NO_IRET = -8, /**< This is a trick for the debuging system - it means no iRet is provided */ + RS_RET_ERR = -3000, /**< generic failure */ + RS_TRUNCAT_TOO_LARGE = -3001, /**< truncation operation where too many chars should be truncated */ + RS_RET_FOUND_AT_STRING_END = -3002, /**< some value found, but at the last pos of string */ + RS_RET_NOT_FOUND = -3003, /**< some requested value not found */ + RS_RET_MISSING_TRAIL_QUOTE = -3004, /**< an expected trailing quote is missing */ + RS_RET_NO_DIGIT = -3005, /**< an digit was expected, but none found (mostly parsing) */ + RS_RET_NO_MORE_DATA = -3006, /**< insufficient data, e.g. end of string during parsing */ + RS_RET_INVALID_IP = -3007, /**< invalid ip found where valid was expected */ + RS_RET_OBJ_CREATION_FAILED = - 3008, /**< the creation of an object failed (no details available) */ + RS_RET_PARAM_ERROR = -1000, /**< invalid parameter in call to function */ + RS_RET_MISSING_INTERFACE = -1001,/**< interface version mismatch, required missing */ + RS_RET_INVALID_CORE_INTERFACE = -1002,/**< interface provided by host invalid, can not be used */ + RS_RET_ENTRY_POINT_NOT_FOUND = -1003,/**< a requested entry point was not found */ + RS_RET_MODULE_ENTRY_POINT_NOT_FOUND = -1004,/**< a entry point requested from a module was not present in it */ + RS_RET_OBJ_NOT_AVAILABLE = -1005,/**< something could not be completed because the required object is not available*/ + RS_RET_LOAD_ERROR = -1006,/**< we had an error loading the object/interface and can not continue */ + RS_RET_MODULE_STILL_REFERENCED = -1007,/**< module could not be unloaded because it still is referenced by someone */ + RS_RET_OBJ_UNKNOWN = -1008,/**< object is unknown where required */ + RS_RET_OBJ_NOT_REGISTERED = -1009,/**< tried to unregister an object that is not registered */ + /* return states for config file processing */ + RS_RET_NONE = -2000, /**< some value is not available - not necessarily an error */ + RS_RET_CONFLINE_UNPROCESSED = -2001,/**< config line was not processed, pass to other module */ + RS_RET_DISCARDMSG = -2002, /**< discard message (no error state, processing request!) */ + RS_RET_INCOMPATIBLE = -2003, /**< function not compatible with requested feature */ + RS_RET_NOENTRY = -2004, /**< do not create an entry for (whatever) - not necessary an error */ + RS_RET_NO_SQL_STRING = -2005, /**< string is not suitable for use as SQL */ + RS_RET_DISABLE_ACTION = -2006, /**< action requests that it be disabled */ + RS_RET_SUSPENDED = -2007, /**< something was suspended, not neccesarily an error */ + RS_RET_RQD_TPLOPT_MISSING = -2008,/**< a required template option is missing */ + RS_RET_INVALID_VALUE = -2009,/**< some value is invalid (e.g. user-supplied data) */ + RS_RET_INVALID_INT = -2010,/**< invalid integer */ + RS_RET_INVALID_CMD = -2011,/**< invalid command */ + RS_RET_VAL_OUT_OF_RANGE = -2012, /**< value out of range */ + RS_RET_FOPEN_FAILURE = -2013, /**< failure during fopen, for example file not found - see errno */ + RS_RET_END_OF_LINKEDLIST = -2014, /**< end of linked list, not an error, but a status */ + RS_RET_CHAIN_NOT_PERMITTED = -2015, /**< chaining (e.g. of config command handlers) not permitted */ + RS_RET_INVALID_PARAMS = -2016,/**< supplied parameters are invalid */ + RS_RET_EMPTY_LIST = -2017, /**< linked list is empty */ + RS_RET_FINISHED = -2018, /**< some opertion is finished, not an error state */ + RS_RET_INVALID_SOURCE = -2019, /**< source (address) invalid for some reason */ + RS_RET_ADDRESS_UNKNOWN = -2020, /**< an address is unknown - not necessarily an error */ + RS_RET_MALICIOUS_ENTITY = -2021, /**< there is an malicious entity involved */ + RS_RET_NO_KERNEL_LOGSRC = -2022, /**< no source for kernel logs can be obtained */ + RS_RET_TCP_SEND_ERROR = -2023, /**< error during TCP send process */ + RS_RET_GSS_SEND_ERROR = -2024, /**< error during GSS (via TCP) send process */ + RS_RET_TCP_SOCKCREATE_ERR = -2025, /**< error during creation of TCP socket */ + RS_RET_GSS_SENDINIT_ERROR = -2024, /**< error during GSS (via TCP) send initialization process */ + RS_RET_QUEUE_FULL = -2025, /**< queue is full, operation could not be completed */ + RS_RET_EOF = -2026, /**< end of file reached, not necessarily an error */ + RS_RET_IO_ERROR = -2027, /**< some kind of IO error happened */ + RS_RET_INVALID_OID = -2028, /**< invalid object ID */ + RS_RET_INVALID_HEADER = -2029, /**< invalid header */ + RS_RET_INVALID_HEADER_VERS = -2030, /**< invalid header version */ + RS_RET_INVALID_DELIMITER = -2031, /**< invalid delimiter, e.g. between params */ + RS_RET_INVALID_PROPFRAME = -2032, /**< invalid framing in serialized property */ + RS_RET_NO_PROPLINE = -2033, /**< line is not a property line */ + RS_RET_INVALID_TRAILER = -2034, /**< invalid trailer */ + RS_RET_VALUE_TOO_LOW = -2035, /**< a provided value is too low */ + RS_RET_FILE_PREFIX_MISSING = -2036, /**< a required file prefix (parameter?) is missing */ + RS_RET_INVALID_HEADER_RECTYPE = -2037, /**< invalid record type in header or invalid header */ + RS_RET_QTYPE_MISMATCH = -2038, /**< different qType when reading back a property type */ + RS_RET_NO_FILE_ACCESS = -2039, /**< covers EACCES error on file open() */ + RS_RET_FILE_NOT_FOUND = -2040, /**< file not found */ + RS_RET_TIMED_OUT = -2041, /**< timeout occured (not necessarily an error) */ + RS_RET_QSIZE_ZERO = -2042, /**< queue size is zero where this is not supported */ + RS_RET_ALREADY_STARTING = -2043, /**< something (a thread?) is already starting - not necessarily an error */ + RS_RET_NO_MORE_THREADS = -2044, /**< no more threads available, not necessarily an error */ + RS_RET_NO_FILEPREFIX = -2045, /**< file prefix is not specified where one is needed */ + RS_RET_CONFIG_ERROR = -2046, /**< there is a problem with the user-provided config settigs */ + RS_RET_OUT_OF_DESRIPTORS = -2047, /**< a descriptor table's space has been exhausted */ + RS_RET_NO_DRIVERS = -2048, /**< a required drivers missing */ + RS_RET_NO_DRIVERNAME = -2049, /**< driver name missing where one was required */ + RS_RET_EOS = -2050, /**< end of stream (of whatever) */ + RS_RET_SYNTAX_ERROR = -2051, /**< syntax error, eg. during parsing */ + RS_RET_INVALID_OCTAL_DIGIT = -2052, /**< invalid octal digit during parsing */ + RS_RET_INVALID_HEX_DIGIT = -2053, /**< invalid hex digit during parsing */ + RS_RET_INTERFACE_NOT_SUPPORTED = -2054, /**< interface not supported */ + RS_RET_OUT_OF_STACKSPACE = -2055, /**< a stack data structure is exhausted and can not be grown */ + RS_RET_STACK_EMPTY = -2056, /**< a pop was requested on a stack, but the stack was already empty */ + RS_RET_INVALID_VMOP = -2057, /**< invalid virtual machine instruction */ + RS_RET_INVALID_VAR = -2058, /**< a var_t or its content is unsuitable, eg. VARTYPE_NONE */ + RS_RET_INVALID_NUMBER = -2059, /**< number invalid during parsing */ + RS_RET_NOT_A_NUMBER = -2060, /**< e.g. conversion impossible because the string is not a number */ + RS_RET_OBJ_ALREADY_REGISTERED = -2061, /**< object (name) is already registered */ + RS_RET_OBJ_REGISTRY_OUT_OF_SPACE = -2062, /**< the object registry has run out of space */ + RS_RET_HOST_NOT_PERMITTED = -2063, /**< a host is not permitted to perform an action it requested */ + RS_RET_MODULE_LOAD_ERR = -2064, /**< module could not be loaded */ + RS_RET_MODULE_LOAD_ERR_PATHLEN = -2065, /**< module could not be loaded - path to long */ + RS_RET_MODULE_LOAD_ERR_DLOPEN = -2066, /**< module could not be loaded - problem in dlopen() */ + RS_RET_MODULE_LOAD_ERR_NO_INIT = -2067, /**< module could not be loaded - init() missing */ + RS_RET_MODULE_LOAD_ERR_INIT_FAILED = -2068, /**< module could not be loaded - init() failed */ + RS_RET_NO_SOCKET = -2069, /**< socket could not be obtained or was not provided */ + RS_RET_SMTP_ERROR = -2070, /**< error during SMTP transation */ + RS_RET_MAIL_NO_TO = -2071, /**< recipient for mail destination is missing */ + RS_RET_MAIL_NO_FROM = -2072, /**< sender for mail destination is missing */ + RS_RET_INVALID_PRI = -2073, /**< PRI value is invalid */ + RS_RET_MALICIOUS_HNAME = -2074, /**< remote peer is trying malicious things with its hostname */ + RS_RET_ACCEPT_ERR = -2074, /**< error during accept() system call */ + RS_RET_INVALID_HNAME = -2075, /**< remote peer's hostname invalid or unobtainable */ + RS_RET_INVALID_PORT = -2076, /**< invalid port value */ + RS_RET_COULD_NOT_BIND = -2077, /**< could not bind socket, defunct */ + RS_RET_GNUTLS_ERR = -2078, /**< (unexpected) error in GnuTLS call */ + RS_RET_MAX_SESS_REACHED = -2079, /**< max nbr of sessions reached, can not create more */ + RS_RET_MAX_LSTN_REACHED = -2080, /**< max nbr of listeners reached, can not create more */ + RS_RET_INVALID_DRVR_MODE = -2081, /**< tried to set mode not supported by driver */ + RS_RET_DRVRNAME_TOO_LONG = -2082, /**< driver name too long - should never happen */ + RS_RET_TLS_HANDSHAKE_ERR = -2083, /**< TLS handshake failed */ + RS_RET_TLS_CERT_ERR = -2084, /**< generic TLS certificate error */ + RS_RET_TLS_NO_CERT = -2085, /**< no TLS certificate available where one was expected */ + RS_RET_VALUE_NOT_SUPPORTED = -2086, /**< a provided value is not supported */ + RS_RET_VALUE_NOT_IN_THIS_MODE = -2087, /**< a provided value is invalid for the curret mode */ + RS_RET_INVALID_FINGERPRINT = -2088, /**< a fingerprint is not valid for this use case */ + RS_RET_CONNECTION_ABORTREQ = -2089, /**< connection was abort requested due to previous error */ + + /* RainerScript error messages (range 1000.. 1999) */ + RS_RET_SYSVAR_NOT_FOUND = 1001, /**< system variable could not be found (maybe misspelled) */ + + /* some generic error/status codes */ + RS_RET_OK_DELETE_LISTENTRY = 1, /**< operation successful, but callee requested the deletion of an entry (special state) */ + RS_RET_TERMINATE_NOW = 2, /**< operation successful, function is requested to terminate (mostly used with threads) */ + RS_RET_NO_RUN = 3, /**< operation successful, but function does not like to be executed */ + RS_RET_OK = 0 /**< operation successful */ +}; + +/* some helpful macros to work with srRetVals. + * Be sure to call the to-be-returned variable always "iRet" and + * the function finalizer always "finalize_it". + */ +#define CHKiRet(code) if((iRet = code) != RS_RET_OK) goto finalize_it +/* macro below is to be used if we need our own handling, eg for cleanup */ +#define CHKiRet_Hdlr(code) if((iRet = code) != RS_RET_OK) +/* macro below is to handle failing malloc/calloc/strdup... which we almost always handle in the same way... */ +#define CHKmalloc(operation) if((operation) == NULL) ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY) +/* macro below is used in conjunction with CHKiRet_Hdlr, else use ABORT_FINALIZE */ +#define FINALIZE goto finalize_it; +#define DEFiRet BEGINfunc rsRetVal iRet = RS_RET_OK +#define RETiRet do{ ENDfuncIRet return iRet; }while(0) + +#define ABORT_FINALIZE(errCode) \ + do { \ + iRet = errCode; \ + goto finalize_it; \ + } while (0) + +/** Object ID. These are for internal checking. Each + * object is assigned a specific ID. This is contained in + * all Object structs (just like C++ RTTI). We can use + * this field to see if we have been passed a correct ID. + * Other than that, there is currently no other use for + * the object id. + */ +enum rsObjectID +{ + OIDrsFreed = -1, /**< assigned, when an object is freed. If this + * is seen during a method call, this is an + * invalid object pointer! + */ + OIDrsInvalid = 0, /**< value created by calloc(), so do not use ;) */ + /* The 0x3412 is a debug aid. It helps us find object IDs in memory + * dumps (on X86, this is 1234 in the dump ;) + * If you are on an embedded device and you would like to save space + * make them 1 byte only. + */ + OIDrsCStr = 0x34120001, + OIDrsPars = 0x34120002 +}; +typedef enum rsObjectID rsObjID; + +/* support to set object types */ +#ifdef NDEBUG +#define rsSETOBJTYPE(pObj, type) +#define rsCHECKVALIDOBJECT(x, type) +#else +#define rsSETOBJTYPE(pObj, type) pObj->OID = type; +#define rsCHECKVALIDOBJECT(x, type) {assert(x != NULL); assert(x->OID == type);} +#endif + +/** + * This macro should be used to free objects. + * It aids in interpreting dumps during debugging. + */ +#ifdef NDEBUG +#define RSFREEOBJ(x) free(x) +#else +#define RSFREEOBJ(x) {(x)->OID = OIDrsFreed; free(x);} +#endif + + +/* for the time being, we do our own portability handling here. It + * looks like autotools either does not yet support checks for it, or + * I wasn't smart enough to find them ;) rgerhards, 2007-07-18 + */ +#ifndef __GNUC__ +# define __attribute__(x) /*NOTHING*/ +#endif + +/* The following prototype is convenient, even though it may not be the 100% correct place.. -- rgerhards 2008-01-07 */ +void dbgprintf(char *, ...) __attribute__((format(printf, 1, 2))); + +#include "debug.h" +#include "obj.h" + +/* the variable below is a trick: before we can init the runtime, the caller + * may want to set a module load path. We can not do this via the glbl class + * because it needs an initialized runtime system (and may at some point in time + * even be loaded itself). So this is a no-go. What we do is use a single global + * variable which may be provided with a pointer by the caller. This variable + * resides in rsyslog.c, the main runtime file. We have not seen any realy valule + * in providing object access functions. If you don't like that, feel free to + * add them. -- rgerhards, 2008-04-17 + */ +extern uchar *glblModPath; /* module load path */ +extern rsRetVal (*glblErrLogger)(uchar*); + +/* some runtime prototypes */ +rsRetVal rsrtInit(char **ppErrObj, obj_if_t *pObjIF); +rsRetVal rsrtExit(void); +int rsrtIsInit(void); +rsRetVal rsrtSetErrLogger(rsRetVal (*errLogger)(uchar*)); + +#endif /* multi-include protection */ +/* vim:set ai: + */ |