diff options
Diffstat (limited to 'plugins')
| -rw-r--r-- | plugins/imrelp/imrelp.c | 16 | ||||
| -rw-r--r-- | plugins/omrelp/omrelp.c | 503 |
2 files changed, 205 insertions, 314 deletions
diff --git a/plugins/imrelp/imrelp.c b/plugins/imrelp/imrelp.c index 7baa95f2..cabc368f 100644 --- a/plugins/imrelp/imrelp.c +++ b/plugins/imrelp/imrelp.c @@ -1,9 +1,10 @@ -/* imtcp.c - * This is the implementation of the TCP input module. +/* imrelp.c * - * File begun on 2007-12-21 by RGerhards (extracted from syslogd.c) + * This is the implementation of the RELP input module. * - * Copyright 2007 Rainer Gerhards and Adiscon GmbH. + * File begun on 2008-03-13 by RGerhards + * + * Copyright 2008 Rainer Gerhards and Adiscon GmbH. * * This file is part of rsyslog. * @@ -35,9 +36,6 @@ #include <netdb.h> #include <sys/types.h> #include <sys/socket.h> -#if HAVE_FCNTL_H -#include <fcntl.h> -#endif #include "rsyslog.h" #include "syslogd.h" #include "cfsysline.h" @@ -203,9 +201,9 @@ CODEmodInit_QueryRegCFSLineHdlr CHKiRet(objUse(tcpsrv, LM_TCPSRV_FILENAME)); /* register config file handlers */ - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpserverrun", 0, eCmdHdlrGetWord, + CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputrelpserverrun", 0, eCmdHdlrGetWord, addTCPListener, NULL, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpmaxsessions", 0, eCmdHdlrInt, + CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputrelpmaxsessions", 0, eCmdHdlrInt, NULL, &iTCPSessMax, STD_LOADABLE_MODULE_ID)); CHKiRet(omsdRegCFSLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID)); diff --git a/plugins/omrelp/omrelp.c b/plugins/omrelp/omrelp.c index 00a3c8ed..8f464e30 100644 --- a/plugins/omrelp/omrelp.c +++ b/plugins/omrelp/omrelp.c @@ -1,16 +1,13 @@ -/* omfwd.c - * This is the implementation of the build-in forwarding output module. +/* omrelp.c + * + * This is the implementation of the RELP output module. * * NOTE: read comments in module-template.h to understand how this file * works! * - * File begun on 2007-07-20 by RGerhards (extracted from syslogd.c) - * This file is under development and has not yet arrived at being fully - * self-contained and a real object. So far, it is mostly an excerpt - * of the "old" message code without any modifications. However, it - * helps to have things at the right place one we go to the meat of it. + * File begun on 2008-03-13 by RGerhards * - * Copyright 2007 Rainer Gerhards and Adiscon GmbH. + * Copyright 2008 Rainer Gerhards and Adiscon GmbH. * * This file is part of rsyslog. * @@ -30,7 +27,6 @@ * A copy of the GPL can be found in the file "COPYING" in this distribution. */ #include "config.h" -#ifdef SYSLOG_INET #include "rsyslog.h" #include <stdio.h> #include <stdarg.h> @@ -63,20 +59,6 @@ MODULE_TYPE_OUTPUT -#ifdef SYSLOG_INET -#define INET_SUSPEND_TIME 60 -/* equal to 1 minute - TODO: see if we can get rid of this now that we have - * the retry intervals in the engine -- rgerhards, 2008-03-12 - */ - -#define INET_RETRY_MAX 30 /* maximum of retries for gethostbyname() */ - /* was 10, changed to 30 because we reduced INET_SUSPEND_TIME by one third. So - * this "fixes" some of implications of it (see comment on INET_SUSPEND_TIME). - * rgerhards, 2005-07-26 - * TODO: this needs to be reviewed in spite of the new engine, too -- rgerhards, 2008-03-12 - */ -#endif - /* internal structures */ DEF_OMOD_STATIC_DATA @@ -93,15 +75,12 @@ typedef struct _instanceData { eDestFORW_SUSP, eDestFORW_UNKN } eDestState; - int iRtryCnt; struct addrinfo *f_addr; int compressionLevel; /* 0 - no compression, else level for zlib */ char *port; - int protocol; # define FORW_UDP 0 # define FORW_TCP 1 /* following fields for TCP-based delivery */ - time_t ttSuspend; /* time selector was suspended */ tcpclt_t *pTCPClt; /* our tcpclt object */ } instanceData; @@ -152,9 +131,7 @@ CODESTARTfreeInstance if(pData->pSockArray != NULL) net.closeUDPListenSockets(pData->pSockArray); - if(pData->protocol == FORW_TCP) { - tcpclt.Destruct(&pData->pTCPClt); - } + tcpclt.Destruct(&pData->pTCPClt); ENDfreeInstance @@ -165,58 +142,7 @@ CODESTARTdbgPrintInstInfo ENDdbgPrintInstInfo -/* Send a message via UDP - * rgehards, 2007-12-20 - */ -static rsRetVal UDPSend(instanceData *pData, char *msg, size_t len) -{ - DEFiRet; - struct addrinfo *r; - int i; - unsigned lsent = 0; - int bSendSuccess; - - if(pData->pSockArray != NULL) { - /* we need to track if we have success sending to the remote - * peer. Success is indicated by at least one sendto() call - * succeeding. We track this be bSendSuccess. We can not simply - * rely on lsent, as a call might initially work, but a later - * call fails. Then, lsent has the error status, even though - * the sendto() succeeded. - * rgerhards, 2007-06-22 - */ - bSendSuccess = FALSE; - for (r = pData->f_addr; r; r = r->ai_next) { - for (i = 0; i < *pData->pSockArray; i++) { - lsent = sendto(pData->pSockArray[i+1], msg, len, 0, r->ai_addr, r->ai_addrlen); - if (lsent == len) { - bSendSuccess = TRUE; - break; - } else { - int eno = errno; - char errStr[1024]; - dbgprintf("sendto() error: %d = %s.\n", - eno, rs_strerror_r(eno, errStr, sizeof(errStr))); - } - } - if (lsent == len && !send_to_all) - break; - } - /* finished looping */ - if (bSendSuccess == FALSE) { - dbgprintf("error forwarding via udp, suspending\n"); - iRet = RS_RET_SUSPENDED; - } - } - - RETiRet; -} - -/* CODE FOR SENDING TCP MESSAGES */ - - -/* Send a frame via plain TCP protocol - * rgerhards, 2007-12-28 +/* Send a frame */ static rsRetVal TCPSendFrame(void *pvData, char *msg, size_t len) { @@ -313,12 +239,11 @@ static rsRetVal doTryResume(instanceData *pData) */ hints.ai_flags = AI_NUMERICSERV; hints.ai_family = family; - hints.ai_socktype = pData->protocol == FORW_UDP ? SOCK_DGRAM : SOCK_STREAM; + hints.ai_socktype = SOCK_STREAM; if((e = getaddrinfo(pData->f_hname, getFwdSyslogPt(pData), &hints, &res)) == 0) { dbgprintf("%s found, resuming.\n", pData->f_hname); pData->f_addr = res; - pData->iRtryCnt = 0; pData->eDestState = eDestFORW; } else { iRet = RS_RET_SUSPENDED; @@ -346,7 +271,7 @@ BEGINdoAction CODESTARTdoAction switch (pData->eDestState) { case eDestFORW_SUSP: - dbgprintf("internal error in omfwd.c, eDestFORW_SUSP in doAction()!\n"); + dbgprintf("internal error in omrelp.c, eDestFORW_SUSP in doAction()!\n"); iRet = RS_RET_SUSPENDED; break; @@ -356,85 +281,60 @@ CODESTARTdoAction break; case eDestFORW: - dbgprintf(" %s:%s/%s\n", pData->f_hname, getFwdSyslogPt(pData), - pData->protocol == FORW_UDP ? "udp" : "tcp"); - /* with UDP, check if the socket is there and, if not, alloc - * it. TODO: there should be a better place for that code. - * rgerhards, 2007-12-26 - */ - if(pData->protocol == FORW_UDP) { - if(pData->pSockArray == NULL) { - pData->pSockArray = net.create_udp_socket((uchar*)pData->f_hname, NULL, 0); - } - } - if ( 0) // TODO: think about this strcmp(getHOSTNAME(f->f_pMsg), LocalHostName) && NoHops ) - /* what we need to do is get the hostname as an additonal string (during parseSe..). Then, - * we can compare that string to LocalHostName. That way, we do not need to access the - * msgobject, and everything is clean. The question remains, though, if that functionality - * here actually makes sense or not. If we really need it, it might make more sense to compare - * the target IP address to the IP addresses of the local machene - that is a far better way of - * handling things than to relay on the error-prone hostname property. - * rgerhards, 2007-07-27 + dbgprintf(" %s:%s/%s\n", pData->f_hname, getFwdSyslogPt(pData), "tcp"); + psz = (char*) ppString[0]; + l = strlen((char*) psz); + if(l > MAXLINE) + l = MAXLINE; + +# ifdef USE_NETZIP + + /* TODO: move all this ZLIB code into a library module! */ + + /* Check if we should compress and, if so, do it. We also + * check if the message is large enough to justify compression. + * The smaller the message, the less likely is a gain in compression. + * To save CPU cycles, we do not try to compress very small messages. + * What "very small" means needs to be configured. Currently, it is + * hard-coded but this may be changed to a config parameter. + * rgerhards, 2006-11-30 */ - dbgprintf("Not sending message to remote.\n"); - else { - pData->ttSuspend = time(NULL); - psz = (char*) ppString[0]; - l = strlen((char*) psz); - if (l > MAXLINE) - l = MAXLINE; - -# ifdef USE_NETZIP - /* Check if we should compress and, if so, do it. We also - * check if the message is large enough to justify compression. - * The smaller the message, the less likely is a gain in compression. - * To save CPU cycles, we do not try to compress very small messages. - * What "very small" means needs to be configured. Currently, it is - * hard-coded but this may be changed to a config parameter. - * rgerhards, 2006-11-30 - */ - if(pData->compressionLevel && (l > MIN_SIZE_FOR_COMPRESS)) { - Bytef out[MAXLINE+MAXLINE/100+12] = "z"; - uLongf destLen = sizeof(out) / sizeof(Bytef); - uLong srcLen = l; - int ret; - ret = compress2((Bytef*) out+1, &destLen, (Bytef*) psz, - srcLen, pData->compressionLevel); - dbgprintf("Compressing message, length was %d now %d, return state %d.\n", - l, (int) destLen, ret); - if(ret != Z_OK) { - /* if we fail, we complain, but only in debug mode - * Otherwise, we are silent. In any case, we ignore the - * failed compression and just sent the uncompressed - * data, which is still valid. So this is probably the - * best course of action. - * rgerhards, 2006-11-30 - */ - dbgprintf("Compression failed, sending uncompressed message\n"); - } else if(destLen+1 < l) { - /* only use compression if there is a gain in using it! */ - dbgprintf("there is gain in compression, so we do it\n"); - psz = (char*) out; - l = destLen + 1; /* take care for the "z" at message start! */ - } - ++destLen; + if(pData->compressionLevel && (l > MIN_SIZE_FOR_COMPRESS)) { + Bytef out[MAXLINE+MAXLINE/100+12] = "z"; + uLongf destLen = sizeof(out) / sizeof(Bytef); + uLong srcLen = l; + int ret; + ret = compress2((Bytef*) out+1, &destLen, (Bytef*) psz, + srcLen, pData->compressionLevel); + dbgprintf("Compressing message, length was %d now %d, return state %d.\n", + l, (int) destLen, ret); + if(ret != Z_OK) { + /* if we fail, we complain, but only in debug mode + * Otherwise, we are silent. In any case, we ignore the + * failed compression and just sent the uncompressed + * data, which is still valid. So this is probably the + * best course of action. + * rgerhards, 2006-11-30 + */ + dbgprintf("Compression failed, sending uncompressed message\n"); + } else if(destLen+1 < l) { + /* only use compression if there is a gain in using it! */ + dbgprintf("there is gain in compression, so we do it\n"); + psz = (char*) out; + l = destLen + 1; /* take care for the "z" at message start! */ } + ++destLen; + } # endif - if(pData->protocol == FORW_UDP) { - /* forward via UDP */ - CHKiRet(UDPSend(pData, psz, l)); - } else { - /* forward via TCP */ - rsRetVal ret; - ret = tcpclt.Send(pData->pTCPClt, pData, psz, l); - if(ret != RS_RET_OK) { - /* error! */ - dbgprintf("error forwarding via tcp, suspending\n"); - pData->eDestState = eDestFORW_SUSP; - iRet = RS_RET_SUSPENDED; - } - } + /* forward */ + rsRetVal ret; + ret = tcpclt.Send(pData->pTCPClt, pData, psz, l); + if(ret != RS_RET_OK) { + /* error! */ + dbgprintf("error forwarding via tcp, suspending\n"); + pData->eDestState = eDestFORW_SUSP; + iRet = RS_RET_SUSPENDED; } break; } @@ -451,162 +351,156 @@ BEGINparseSelectorAct TCPFRAMINGMODE tcp_framing; CODESTARTparseSelectorAct CODE_STD_STRING_REQUESTparseSelectorAct(1) - if(*p == '@') { - if((iRet = createInstance(&pData)) != RS_RET_OK) - goto finalize_it; - ++p; /* eat '@' */ - if(*p == '@') { /* indicator for TCP! */ - pData->protocol = FORW_TCP; - ++p; /* eat this '@', too */ - } else { - pData->protocol = FORW_UDP; - } - /* we are now after the protocol indicator. Now check if we should - * use compression. We begin to use a new option format for this: - * @(option,option)host:port - * The first option defined is "z[0..9]" where the digit indicates - * the compression level. If it is not given, 9 (best compression) is - * assumed. An example action statement might be: - * @@(z5,o)127.0.0.1:1400 - * Which means send via TCP with medium (5) compresion (z) to the local - * host on port 1400. The '0' option means that octet-couting (as in - * IETF I-D syslog-transport-tls) is to be used for framing (this option - * applies to TCP-based syslog only and is ignored when specified with UDP). - * That is not yet implemented. - * rgerhards, 2006-12-07 - */ - if(*p == '(') { - /* at this position, it *must* be an option indicator */ - do { - ++p; /* eat '(' or ',' (depending on when called) */ - /* check options */ - if(*p == 'z') { /* compression */ + if(!strncmp((char*) p, ":omrelp:", sizeof(":omrelp:") - 1)) { + p += sizeof(":omrelp:") - 1; /* eat indicator sequence (-1 because of '\0'!) */ + } else { + ABORT_FINALIZE(RS_RET_CONFLINE_UNPROCESSED); + } + + /* ok, if we reach this point, we have something for us */ + if((iRet = createInstance(&pData)) != RS_RET_OK) + FINALIZE; + + /* we are now after the protocol indicator. Now check if we should + * use compression. We begin to use a new option format for this: + * @(option,option)host:port + * The first option defined is "z[0..9]" where the digit indicates + * the compression level. If it is not given, 9 (best compression) is + * assumed. An example action statement might be: + * :omrelp:(z5,o)127.0.0.1:1400 + * Which means send via TCP with medium (5) compresion (z) to the local + * host on port 1400. The '0' option means that octet-couting (as in + * IETF I-D syslog-transport-tls) is to be used for framing (this option + * applies to TCP-based syslog only and is ignored when specified with UDP). + * That is not yet implemented. + * rgerhards, 2006-12-07 + * TODO: think of all this in spite of RELP -- rgerhards, 2008-03-13 + */ + if(*p == '(') { + /* at this position, it *must* be an option indicator */ + do { + ++p; /* eat '(' or ',' (depending on when called) */ + /* check options */ + if(*p == 'z') { /* compression */ # ifdef USE_NETZIP + ++p; /* eat */ + if(isdigit((int) *p)) { + int iLevel; + iLevel = *p - '0'; ++p; /* eat */ - if(isdigit((int) *p)) { - int iLevel; - iLevel = *p - '0'; - ++p; /* eat */ - pData->compressionLevel = iLevel; - } else { - errmsg.LogError(NO_ERRCODE, "Invalid compression level '%c' specified in " - "forwardig action - NOT turning on compression.", - *p); - } + pData->compressionLevel = iLevel; + } else { + errmsg.LogError(NO_ERRCODE, "Invalid compression level '%c' specified in " + "forwardig action - NOT turning on compression.", + *p); + } # else - errmsg.LogError(NO_ERRCODE, "Compression requested, but rsyslogd is not compiled " - "with compression support - request ignored."); + errmsg.LogError(NO_ERRCODE, "Compression requested, but rsyslogd is not compiled " + "with compression support - request ignored."); # endif /* #ifdef USE_NETZIP */ - } else if(*p == 'o') { /* octet-couting based TCP framing? */ - ++p; /* eat */ - /* no further options settable */ - tcp_framing = TCP_FRAMING_OCTET_COUNTING; - } else { /* invalid option! Just skip it... */ - errmsg.LogError(NO_ERRCODE, "Invalid option %c in forwarding action - ignoring.", *p); - ++p; /* eat invalid option */ - } - /* the option processing is done. We now do a generic skip - * to either the next option or the end of the option - * block. - */ - while(*p && *p != ')' && *p != ',') - ++p; /* just skip it */ - } while(*p && *p == ','); /* Attention: do.. while() */ - if(*p == ')') - ++p; /* eat terminator, on to next */ - else - /* we probably have end of string - leave it for the rest - * of the code to handle it (but warn the user) - */ - errmsg.LogError(NO_ERRCODE, "Option block not terminated in forwarding action."); - } - /* extract the host first (we do a trick - we replace the ';' or ':' with a '\0') - * now skip to port and then template name. rgerhards 2005-07-06 - */ - for(q = p ; *p && *p != ';' && *p != ':' ; ++p) - /* JUST SKIP */; - - pData->port = NULL; - if(*p == ':') { /* process port */ - uchar * tmp; - - *p = '\0'; /* trick to obtain hostname (later)! */ - tmp = ++p; - for(i=0 ; *p && isdigit((int) *p) ; ++p, ++i) - /* SKIP AND COUNT */; - pData->port = malloc(i + 1); - if(pData->port == NULL) { - errmsg.LogError(NO_ERRCODE, "Could not get memory to store syslog forwarding port, " - "using default port, results may not be what you intend\n"); - /* we leave f_forw.port set to NULL, this is then handled by - * getFwdSyslogPt(). - */ - } else { - memcpy(pData->port, tmp, i); - *(pData->port + i) = '\0'; + } else if(*p == 'o') { /* octet-couting based TCP framing? */ + ++p; /* eat */ + /* no further options settable */ + tcp_framing = TCP_FRAMING_OCTET_COUNTING; + } else { /* invalid option! Just skip it... */ + errmsg.LogError(NO_ERRCODE, "Invalid option %c in forwarding action - ignoring.", *p); + ++p; /* eat invalid option */ } - } - - /* now skip to template */ - bErr = 0; - while(*p && *p != ';') { - if(*p && *p != ';' && !isspace((int) *p)) { - if(bErr == 0) { /* only 1 error msg! */ - bErr = 1; - errno = 0; - errmsg.LogError(NO_ERRCODE, "invalid selector line (port), probably not doing " - "what was intended"); - } - } - ++p; - } - - /* TODO: make this if go away! */ - if(*p == ';') { - *p = '\0'; /* trick to obtain hostname (later)! */ - strcpy(pData->f_hname, (char*) q); - *p = ';'; - } else - strcpy(pData->f_hname, (char*) q); - - /* process template */ - if((iRet = cflineParseTemplateName(&p, *ppOMSR, 0, OMSR_NO_RQD_TPL_OPTS, (uchar*) " StdFwdFmt")) - != RS_RET_OK) - goto finalize_it; - - /* first set the pData->eDestState */ - memset(&hints, 0, sizeof(hints)); - /* port must be numeric, because config file syntax requests this */ - hints.ai_flags = AI_NUMERICSERV; - hints.ai_family = family; - hints.ai_socktype = pData->protocol == FORW_UDP ? SOCK_DGRAM : SOCK_STREAM; - if( (error = getaddrinfo(pData->f_hname, getFwdSyslogPt(pData), &hints, &res)) != 0) { - pData->eDestState = eDestFORW_UNKN; - pData->iRtryCnt = INET_RETRY_MAX; - pData->ttSuspend = time(NULL); + /* the option processing is done. We now do a generic skip + * to either the next option or the end of the option + * block. + */ + while(*p && *p != ')' && *p != ',') + ++p; /* just skip it */ + } while(*p && *p == ','); /* Attention: do.. while() */ + if(*p == ')') + ++p; /* eat terminator, on to next */ + else + /* we probably have end of string - leave it for the rest + * of the code to handle it (but warn the user) + */ + errmsg.LogError(NO_ERRCODE, "Option block not terminated in forwarding action."); + } + /* extract the host first (we do a trick - we replace the ';' or ':' with a '\0') + * now skip to port and then template name. rgerhards 2005-07-06 + */ + for(q = p ; *p && *p != ';' && *p != ':' ; ++p) + /* JUST SKIP */; + + pData->port = NULL; + if(*p == ':') { /* process port */ + uchar * tmp; + + *p = '\0'; /* trick to obtain hostname (later)! */ + tmp = ++p; + for(i=0 ; *p && isdigit((int) *p) ; ++p, ++i) + /* SKIP AND COUNT */; + pData->port = malloc(i + 1); + if(pData->port == NULL) { + errmsg.LogError(NO_ERRCODE, "Could not get memory to store syslog forwarding port, " + "using default port, results may not be what you intend\n"); + /* we leave f_forw.port set to NULL, this is then handled by + * getFwdSyslogPt(). + */ } else { - pData->eDestState = eDestFORW; - pData->f_addr = res; + memcpy(pData->port, tmp, i); + *(pData->port + i) = '\0'; } - /* - * Otherwise the host might be unknown due to an - * inaccessible nameserver (perhaps on the same - * host). We try to get the ip number later, like - * FORW_SUSP. - */ - if(pData->protocol == FORW_TCP) { - /* create our tcpclt */ - CHKiRet(tcpclt.Construct(&pData->pTCPClt)); - /* and set callbacks */ - CHKiRet(tcpclt.SetSendInit(pData->pTCPClt, TCPSendInit)); - CHKiRet(tcpclt.SetSendFrame(pData->pTCPClt, TCPSendFrame)); - CHKiRet(tcpclt.SetSendPrepRetry(pData->pTCPClt, TCPSendPrepRetry)); - CHKiRet(tcpclt.SetFraming(pData->pTCPClt, tcp_framing)); + } + + /* now skip to template */ + bErr = 0; + while(*p && *p != ';') { + if(*p && *p != ';' && !isspace((int) *p)) { + if(bErr == 0) { /* only 1 error msg! */ + bErr = 1; + errno = 0; + errmsg.LogError(NO_ERRCODE, "invalid selector line (port), probably not doing " + "what was intended"); + } } + ++p; + } + /* TODO: make this if go away! */ + if(*p == ';') { + *p = '\0'; /* trick to obtain hostname (later)! */ + strcpy(pData->f_hname, (char*) q); + *p = ';'; + } else + strcpy(pData->f_hname, (char*) q); + + /* process template */ + if((iRet = cflineParseTemplateName(&p, *ppOMSR, 0, OMSR_NO_RQD_TPL_OPTS, (uchar*) " StdFwdFmt")) + != RS_RET_OK) + goto finalize_it; + + /* first set the pData->eDestState */ + memset(&hints, 0, sizeof(hints)); + /* port must be numeric, because config file syntax requests this */ + hints.ai_flags = AI_NUMERICSERV; + hints.ai_family = family; + hints.ai_socktype = SOCK_STREAM; + if( (error = getaddrinfo(pData->f_hname, getFwdSyslogPt(pData), &hints, &res)) != 0) { + pData->eDestState = eDestFORW_UNKN; } else { - iRet = RS_RET_CONFLINE_UNPROCESSED; + pData->eDestState = eDestFORW; + pData->f_addr = res; } + /* + * Otherwise the host might be unknown due to an + * inaccessible nameserver (perhaps on the same + * host). We try to get the ip number later, like + * FORW_SUSP. + */ + + /* create our tcpclt */ + CHKiRet(tcpclt.Construct(&pData->pTCPClt)); + /* and set callbacks */ + CHKiRet(tcpclt.SetSendInit(pData->pTCPClt, TCPSendInit)); + CHKiRet(tcpclt.SetSendFrame(pData->pTCPClt, TCPSendFrame)); + CHKiRet(tcpclt.SetSendPrepRetry(pData->pTCPClt, TCPSendPrepRetry)); + CHKiRet(tcpclt.SetFraming(pData->pTCPClt, tcp_framing)); /* TODO: do we need to call freeInstance if we failed - this is a general question for * all output modules. I'll address it lates as the interface evolves. rgerhards, 2007-07-25 @@ -645,6 +539,5 @@ CODEmodInit_QueryRegCFSLineHdlr CHKiRet(objUse(tcpclt, LM_TCPCLT_FILENAME)); ENDmodInit -#endif /* #ifdef SYSLOG_INET */ /* vim:set ai: */ |