summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--ChangeLog956
-rw-r--r--Makefile695
-rw-r--r--Makefile.am11
-rw-r--r--NEWS954
-rw-r--r--README (renamed from README.linux)0
-rw-r--r--aclocal.m4896
-rwxr-xr-xcompile142
-rw-r--r--config.h275
-rwxr-xr-xconfigure8572
-rw-r--r--configure.ac179
-rwxr-xr-xdepcomp584
-rwxr-xr-xinstall-sh507
-rwxr-xr-xmissing367
-rw-r--r--syslogd.c16
14 files changed, 13182 insertions, 972 deletions
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 00000000..8a3025b6
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1,956 @@
+---------------------------------------------------------------------------
+Version 1.16.0 (RGer/Peter Vrabec), 2007-07-1?
+- build system switched to autotools
+---------------------------------------------------------------------------
+Version 1.15.1 (RGer), 2007-07-10
+- fixed a bug that caused a dynaFile selector to stall when there was
+ an open error with one file
+- improved template processing for dynaFiles; templates are now only
+ looked up during initialization - speeds up processing
+- optimized memory layout in struct filed when compiled with MySQL
+ support
+- fixed a bug that caused compilation without SYSLOG_INET to fail
+- re-enabled the "last message repeated n times" feature. This
+ feature was not taken care of while rsyslogd evolved from sysklogd
+ and it was more or less defunct. Now it is fully functional again.
+- added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE
+- fixed a bug in iovAsString() that caused a memory leak under stress
+ conditions (most probably memory shortage). This was unlikely to
+ ever happen, but it doesn't hurt doing it right
+- cosmetic: defined type "uchar", change all unsigned chars to uchar
+---------------------------------------------------------------------------
+Version 1.15.0 (RGer), 2007-07-05
+- added ability to dynamically generate file names based on templates
+ and thus properties. This was a much-requested feature. It makes
+ life easy when it e.g. comes to splitting files based on the sender
+ address.
+- added $umask and $FileCreateMode config file directives
+- applied a patch from Bartosz Kuzma to compile cleanly under NetBSD
+- checks for extra (unexpected) characters in system config file lines
+ have been added
+- added IPv6 documentation - was accidently missing from CVS
+- begun to change char to unsigned char
+---------------------------------------------------------------------------
+Version 1.14.2 (RGer), 2007-07-03
+** this release fixes all known nits with IPv6 **
+- restored capability to do /etc/service lookup for "syslog"
+ service when -r 0 was given
+- documented IPv6 handling of syslog messages
+- integrate patch from Bartosz Kuźma to make rsyslog compile under
+ Solaris again (the patch replaced a strndup() call, which is not
+ available under Solaris
+- improved debug logging when waiting on select
+- updated rsyslogd man page with new options (-46A)
+---------------------------------------------------------------------------
+Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29
+- added Peter Vrabec's patch for IPv6 TCP
+- prefixed all messages send to stderr in rsyslogd with "rsyslogd: "
+---------------------------------------------------------------------------
+Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28
+- Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled
+ IPv6 Support is currently for UDP only, TCP is to come soon.
+ AllowedSender configuration does not yet work for IPv6.
+- fixed code in iovCreate() that broke C's strict aliasing rules
+- fixed some char/unsigned char differences that forced the compiler
+ to spit out warning messages
+- updated the Red Hat init script to fix a known issue (thanks to
+ Peter Vrabec)
+---------------------------------------------------------------------------
+Version 1.13.5 (RGer), 2007-06-22
+- made the TCP session limit configurable via command line switch
+ now -t <port>,<max sessions>
+- added man page for rklogd(8) (basically a copy from klogd, but now
+ there is one...)
+- fixed a bug that caused internal messages (e.g. rsyslogd startup) to
+ appear without a tag.
+- removed a minor memory leak that occurred when TAG processing requalified
+ a HOSTNAME to be a TAG (and a TAG already was set).
+- removed potential small memory leaks in MsgSet***() functions. There
+ would be a leak if a property was re-set, something that happened
+ extremely seldom.
+---------------------------------------------------------------------------
+Version 1.13.4 (RGer), 2007-06-18
+- added a new property "PRI-text", which holds the PRI field in
+ textual form (e.g. "syslog.info")
+- added alias "syslogseverity" for "syslogpriority", which is a
+ misleading property name that needs to stay for historical
+ reasons (and backward-compatility)
+- added doc on how to record PRI value in log file
+- enhanced signal handling in klogd, including removal of an unsafe
+ call to the logging system during signal handling
+---------------------------------------------------------------------------
+Version 1.13.3 (RGer), 2007-06-15
+- create a version of syslog.c from scratch. This is now
+ - highly optimized for rsyslog
+ - removes an incompatible license problem as the original
+ version had a BSD license with advertising clause
+ - fixed in the regard that rklogd will continue to work when
+ rsysogd has been restarted (the original version, as well
+ as sysklogd, will remain silent then)
+ - solved an issue with an extra NUL char at message end that the
+ original version had
+- applied some changes to klogd to care for the new interface
+- fixed a bug in syslogd.c which prevented compiling under debian
+---------------------------------------------------------------------------
+Version 1.13.2 (RGer), 2007-06-13
+- lib order in makefile patched to facilitate static linking - thanks
+ to Bennett Todd for providing the patch
+- Integrated a patch from Peter Vrabec (pvrabec@redheat.com):
+ - added klogd under the name of rklogd (remove dependency on
+ original sysklogd package
+ - createDB.sql now in UTF
+ - added additional config files for use on Red Hat
+---------------------------------------------------------------------------
+Version 1.13.1 (RGer), 2007-02-05
+- changed the listen backlog limit to a more reasonable value based on
+ the maximum number of TCP connections configurd (10% + 5) - thanks to Guy
+ Standen for the hint (actually, the limit was 5 and that was a
+ left-over from early testing).
+- fixed a bug in makefile which caused DB-support to be disabled when
+ NETZIP support was enabled
+- added the -e option to allow transmission of every message to remote
+ hosts (effectively turns off duplicate message suppression)
+- (somewhat) improved memory consumption when compiled with MySQL support
+- looks like we fixed an incompatibility with MySQL 5.x and above software
+ At least in one case, the remote server name was destroyed, leading to
+ a connection failure. The new, improved code does not have this issue and
+ so we see this as solved (the new code is generally somewhat better, so
+ there is a good chance we fixed this incompatibility).
+---------------------------------------------------------------------------
+Version 1.13.0 (RGer), 2006-12-19
+- added '$' as ToPos proptery replacer specifier - means "up to the
+ end of the string"
+- property replacer option "escape-cc", "drop-cc" and "space-cc" added
+- changed the handling of \0 characters inside syslog messages. We now
+ consistently escape them to "#000". This is somewhat recommended in
+ the draft-ietf-syslog-protocol-19 draft. While the real recomendation
+ is to not escape any characters at all, we can not do this without
+ considerable modification of the code. So we escape it to "#000", which
+ is consistent with a sample found in the Internet-draft.
+- removed message glue logic (see printchopped() comment for details)
+ Also caused removal of parts table and thus some improvements in
+ memory usage.
+- changed the default MAXLINE to 2048 to take care of recent syslog
+ standardization efforts (can easily be changed in syslogd.c)
+- added support for byte-counted TCP syslog messages (much like
+ syslog-transport-tls-05 Internet Draft). This was necessary to
+ support compression over TCP.
+- added support for receiving compressed syslog messages
+- added support for sending compressed syslog messages
+- fixed a bug where the last message in a syslog/tcp stream was
+ lost if it was not properly terminated by a LF character
+---------------------------------------------------------------------------
+Version 1.12.3 (RGer), 2006-10-04
+- implemented some changes to support Solaris (but support is not
+ yet complete)
+- commented out (via #if 0) some methods that are currently not being use
+ but should be kept for further us
+- added (interim) -u 1 option to turn off hostname and tag parsing
+- done some modifications to better support Fedora
+- made the field delimiter inside property replace configurable via
+ template
+- fixed a bug in property replacer: if fields were used, the delimitor
+ became part of the field. Up until now, this was barely noticable as
+ the delimiter as TAB only and thus invisible to a human. With other
+ delimiters available now, it quickly showed up. This bug fix might cause
+ some grief to existing installations if they used the extra TAB for
+ whatever reasons - sorry folks... Anyhow, a solution is easy: just add
+ a TAB character contstant into your template. Thus, there has no attempt
+ been made to do this in a backwards-compatible way.
+---------------------------------------------------------------------------
+Version 1.12.2 (RGer), 2006-02-15
+- fixed a bug in the RFC 3339 date formatter. An extra space was added
+ after the actual timestamp
+- added support for providing high-precision RFC3339 timestamps for
+ (rsyslogd-)internally-generated messages
+- very (!) experimental support for syslog-protocol internet draft
+ added (the draft is experimental, the code is solid ;))
+- added support for field-extracting in the property replacer
+- enhanced the legacy-syslog parser so that it can interpret messages
+ that do not contain a TIMESTAMP
+- fixed a bug that caused the default socket (usually /dev/log) to be
+ opened even when -o command line option was given
+- fixed a bug in the Debian sample startup script - it caused rsyslogd
+ to listen to remote requests, which it shouldn't by default
+---------------------------------------------------------------------------
+Version 1.12.1 (RGer), 2005-11-23
+- made multithreading work with BSD. Some signal-handling needed to be
+ restructured. Also, there might be a slight delay of up to 10 seconds
+ when huping and terminating rsyslogd under BSD
+- fixed a bug where a NULL-pointer was passed to printf() in logmsg().
+- fixed a bug during "make install" where rc3195d was not installed
+ Thanks to Bennett Todd for spotting this.
+- fixed a bug where rsyslogd dumped core when no TAG was found in the
+ received message
+- enhanced message parser so that it can deal with missing hostnames
+ in many cases (may not be totally fail-safe)
+- fixed a bug where internally-generated messages did not have the correct
+ TAG
+---------------------------------------------------------------------------
+Version 1.12.0 (RGer), 2005-10-26
+- moved to a multi-threaded design. single-threading is still optionally
+ available. Multi-threading is experimental!
+- fixed a potential race condition. In the original code, marking was done
+ by an alarm handler, which could lead to all sorts of bad things. This
+ has been changed now. See comments in syslogd.c/domark() for details.
+- improved debug output for property-based filters
+- not a code change, but: I have checked all exit()s to make sure that
+ none occurs once rsyslogd has started up. Even in unusual conditions
+ (like low-memory conditions) rsyslogd somehow remains active. Of course,
+ it might loose a message or two, but at least it does not abort and it
+ can also recover when the condition no longer persists.
+- fixed a bug that could cause loss of the last message received
+ immediately before rsyslogd was terminated.
+- added comments on thread-safety of global variables in syslogd.c
+- fixed a small bug: spurios printf() when TCP syslog was used
+- fixed a bug that causes rsyslogd to dump core on termination when one
+ of the selector lines did not receive a message during the run (very
+ unlikely)
+- fixed an one-too-low memory allocation in the TCP sender. Could result
+ in rsyslogd dumping core.
+- fixed a bug with regular expression support (thanks to Andres Riancho)
+- a little bit of code restructuring (especially main(), which was
+ horribly large)
+---------------------------------------------------------------------------
+Version 1.11.1 (RGer), 2005-10-19
+- support for BSD-style program name and host blocks
+- added a new property "programname" that can be used in templates
+- added ability to specify listen port for rfc3195d
+- fixed a bug that rendered the "startswith" comparison operation
+ unusable.
+- changed more functions to "static" storage class to help compiler
+ optimize (should have been static in the first place...)
+- fixed a potential memory leak in the string buffer class destructor.
+ As the destructur was previously never called, the leak did not actually
+ appear.
+- some internal restructuring in anticipation/preparation of minimal
+ multi-threading support
+- rsyslogd still shares some code with the sysklogd project. Some patches
+ for this shared code have been brought over from the sysklogd CVS.
+---------------------------------------------------------------------------
+Version 1.11.0 (RGer), 2005-10-12
+- support for receiving messages via RFC 3195; added rfc3195d for that
+ purpose
+- added an additional guard to prevent rsyslogd from aborting when the
+ 2gb file size limit is hit. While a user can configure rsyslogd to
+ handle such situations, it would abort if that was not done AND large
+ file support was not enabled (ok, this is hopefully an unlikely scenario)
+- fixed a bug that caused additional Unix domain sockets to be incorrectly
+ processed - could lead to message loss in extreme cases
+---------------------------------------------------------------------------
+Version 1.10.2 (RGer), 2005-09-27
+- added comparison operations in property-based filters:
+ * isequal
+ * startswith
+- added ability to negate all property-based filter comparison operations
+ by adding a !-sign right in front of the operation name
+- added the ability to specify remote senders for UDP and TCP
+ received messages. Allows to block all but well-known hosts
+- changed the $-config line directives to be case-INsensitive
+- new command line option -w added: "do not display warnings if messages
+ from disallowed senders are received"
+- fixed a bug that caused rsyslogd to dump core when the compare value
+ was not quoted in property-based filters
+- fixed a bug in the new CStr compare function which lead to invalid
+ results (fortunately, this function was not yet used widely)
+- added better support for "debugging" rsyslog.conf property filters
+ (only if -d switch is given)
+- changed some function definitions to static, which eventually enables
+ some compiler optimizations
+- fixed a bug in MySQL code; when a SQL error occured, rsyslogd could
+ run in a tight loop. This was due to invalid sequence of error reporting
+ and is now fixed.
+---------------------------------------------------------------------------
+Version 1.10.1 (RGer), 2005-09-23
+- added the ability to execute a shell script as an action.
+ Thanks to Bjoern Kalkbrenner for providing the code!
+- fixed a bug in the MySQL code; due to the bug the automatic one-time
+ retry after an error did not happen - this lead to error message in
+ cases where none should be seen (e.g. after a MySQL restart)
+- fixed a security issue with SQL-escaping in conjunction with
+ non-(SQL-)standard MySQL features.
+---------------------------------------------------------------------------
+Version 1.10.0 (RGer), 2005-09-20
+ REMINDER: 1.10 is the first unstable version if the 1.x series!
+- added the capability to filter on any property in selector lines
+ (not just facility and priority)
+- changed stringbuf into a new counted string class
+- added support for a "discard" action. If a selector line with
+ discard (~ character) is found, no selector lines *after* that
+ line will be processed.
+- thanks to Andres Riancho, regular expression support has been
+ added to the template engine
+- added the FROMHOST property in the template processor, which could
+ previously not be obtained. Thanks to Cristian Testa for pointing
+ this out and even providing a fix.
+- added display of compile-time options to -v output
+- performance improvement for production build - made some checks
+ to happen only during debug mode
+- fixed a problem with compiling on SUSE and - while doing so - removed
+ the socket call to set SO_BSDCOMPAT in cases where it is obsolete.
+---------------------------------------------------------------------------
+Version 1.0.4 (RGer), 2006-02-01
+- a small but important fix: the tcp receiver had two forgotten printf's
+ in it that caused a lot of unnecessary output to stdout. This was
+ important enough to justify a new release
+---------------------------------------------------------------------------
+Version 1.0.3 (RGer), 2005-11-14
+- added an additional guard to prevent rsyslogd from aborting when the
+ 2gb file size limit is hit. While a user can configure rsyslogd to
+ handle such situations, it would abort if that was not done AND large
+ file support was not enabled (ok, this is hopefully an unlikely scenario)
+- fixed a bug that caused additional Unix domain sockets to be incorrectly
+ processed - could lead to message loss in extreme cases
+- applied some patches available from the sysklogd project to code
+ shared from there
+- fixed a bug that causes rsyslogd to dump core on termination when one
+ of the selector lines did not receive a message during the run (very
+ unlikely)
+- fixed an one-too-low memory allocation in the TCP sender. Could result
+ in rsyslogd dumping core.
+- fixed a bug in the TCP sender that caused the retry logic to fail
+ after an error or receiver overrun
+- fixed a bug in init() that could lead to dumping core
+- fixed a bug that could lead to dumping core when no HOSTNAME or no TAG
+ was present in the syslog message
+---------------------------------------------------------------------------
+Version 1.0.2 (RGer), 2005-10-05
+- fixed an issue with MySQL error reporting. When an error occured,
+ the MySQL driver went into an endless loop (at least in most cases).
+---------------------------------------------------------------------------
+Version 1.0.1 (RGer), 2005-09-23
+- fixed a security issue with SQL-escaping in conjunction with
+ non-(SQL-)standard MySQL features.
+---------------------------------------------------------------------------
+Version 1.0.0 (RGer), 2005-09-12
+- changed install doc to cover daily cron scripts - a trouble source
+- added rc script for slackware (provided by Chris Elvidge - thanks!)
+- fixed a really minor bug in usage() - the -r option was still
+ reported as without the port parameter
+---------------------------------------------------------------------------
+Version 0.9.8 (RGer), 2005-09-05
+- made startup and shutdown message more consistent and included the
+ pid, so that they can be easier correlated. Used syslog-protocol
+ structured data format for this purpose.
+- improved config info in startup message, now tells not only
+ if it is listening remote on udp, but also for tcp. Also includes
+ the port numbers. The previous startup message was misleading, because
+ it did not say "remote reception" if rsyslogd was only listening via
+ tcp (but not via udp).
+- added a "how can you help" document to the doc set
+---------------------------------------------------------------------------
+Version 0.9.7 (RGer), 2005-08-15
+- some of the previous doc files (like INSTALL) did not properly
+ reflect the changes to the build process and the new doc. Fixed
+ that.
+- changed syslogd.c so that when compiled without database support,
+ an error message is displayed when a database action is detected
+ in the config file (previously this was used as an user rule ;))
+- fixed a bug in the os-specific Makefiles which caused MySQL
+ support to not be compiled, even if selected
+---------------------------------------------------------------------------
+Version 0.9.6 (RGer), 2005-08-09
+- greatly enhanced documentation. Now available in html format in
+ the "doc" folder and FreeBSD. Finally includes an install howto.
+- improved MySQL error messages a little - they now show up as log
+ messages, too (formerly only in debug mode)
+- added the ability to specify the listen port for udp syslog.
+ WARNING: This introduces an incompatibility. Formerly, udp
+ syslog was enabled by the -r command line option. Now, it is
+ "-r [port]", which is consistent with the tcp listener. However,
+ just -r will now return an error message.
+- added sample startup scripts for Debian and FreeBSD
+- added support for easy feature selection in the makefile. Un-
+ fortunately, this also means I needed to spilt the make file
+ for different OS and distros. There are some really bad syntax
+ differences between FreeBSD and Linux make.
+---------------------------------------------------------------------------
+Version 0.9.5 (RGer), 2005-08-01
+- the "semicolon bug" was actually not (fully) solved in 0.9.4. One
+ part of the bug was solved, but another still existed. This one
+ is fixed now, too.
+- the "semicolon bug" actually turned out to be a more generic bug.
+ It appeared whenever an invalid template name was given. With some
+ selector actions, rsyslogd dumped core, with other it "just" had
+ a small ressource leak with others all worked well. These anomalies
+ are now fixed. Note that they only appeared during system initaliziation
+ once the system was running, nothing bad happened.
+- improved error reporting for template errors on startup. They are now
+ shown on the console and the start-up tty. Formerly, they were only
+ visible in debug mode.
+- support for multiple instances of rsyslogd on a single machine added
+- added new option "-o" --> omit local unix domain socket. This option
+ enables rsyslogd NOT to listen to the local socket. This is most
+ helpful when multiple instances of rsyslogd (or rsyslogd and another
+ syslogd) shall run on a single system.
+- added new option "-i <pidfile>" which allows to specify the pidfile.
+ This is needed when multiple instances of rsyslogd are to be run.
+- the new project home page is now online at www.rsyslog.com
+---------------------------------------------------------------------------
+Version 0.9.4 (RGer), 2005-07-25
+- finally added the TCP sender. It now supports non-blocking mode, no
+ longer disabling message reception during connect. As it is now, it
+ is usable in production. The code could be more sophisticated, but
+ I've kept it short in anticipation of the move to liblogging, which
+ will lead to the removal of the code just written ;)
+- the "exiting on signal..." message still had the "syslogd" name in
+ it. Changed this to "rsyslogd", as we do not have a large user base
+ yet, this should pose no problem.
+- fixed "the semiconlon" bug. rsyslogd dumped core if a write-db action
+ was specified but no semicolon was given after the password (an empty
+ template was ok, but the semicolon needed to be present).
+- changed a default for traditional output format. During testing, it
+ was seen that the timestamp written to file in default format was
+ the time of message reception, not the time specified in the TIMESTAMP
+ field of the message itself. Traditionally, the message TIMESTAMP is
+ used and this has been changed now.
+---------------------------------------------------------------------------
+Version 0.9.3 (RGer), 2005-07-19
+- fixed a bug in the message parser. In June, the RFC 3164 timestamp
+ was not correctly parsed (yes, only in June and some other months,
+ see the code comment to learn why...)
+- added the ability to specify the destination port when forwarding
+ syslog messages (both for TCP and UDP)
+- added an very experimental TCP sender (activated by
+ @@machine:port in config). This is not yet for production use. If
+ the receiver is not alive, rsyslogd will wait quite some time until
+ the connection request times out, which most probably leads to
+ loss of incoming messages.
+
+---------------------------------------------------------------------------
+Version 0.9.2 (RGer), around 2005-07-06
+- I intended to change the maxsupported message size to 32k to
+ support IHE - but given the memory inefficiency in the usual use
+ cases, I have not done this. I have, however, included very
+ specific instructions on how to do this in the source code. I have
+ also done some testing with 32k messages, so you can change the
+ max size without taking too much risk.
+- added a syslog/tcp receiver; we now can receive messages via
+ plain tcp, but we can still send only via UDP. The syslog/tcp
+ receiver is the primary enhancement of this release.
+- slightly changed some error messages that contained a spurios \n at
+ the end of the line (which gives empty lines in your log...)
+
+---------------------------------------------------------------------------
+Version 0.9.1 (RGer)
+- fixed code so that it compiles without errors under FreeBSD
+- removed now unused function "allocate_log()" from syslogd.c
+- changed the make file so that it contains more defines for
+ different environments (in the long term, we need a better
+ system for disabling/enabling features...)
+- changed some printf's printing off_t types to %lld and
+ explicit (long long) casts. I tried to figure out the exact type,
+ but did not succeed in this. In the worst case, ultra-large peta-
+ byte files will now display funny informational messages on rollover,
+ something I think we can live with for the next 10 years or so...
+
+---------------------------------------------------------------------------
+Version 0.9.0 (RGer)
+- changed the filed structure to be a linked list. Previously, it
+ was a table - well, for non-SYSV it was defined as linked list,
+ but from what I see that code did no longer work after my
+ modifications. I am now using a linked list in general because
+ that is needed for other upcoming modifications.
+- fixed a bug that caused rsyslogd not to listen to anything if
+ the configuration file could not be read
+- pervious versions disabled network logging (send/receive) if
+ syslog/udp port was not in /etc/services. Now defaulting to
+ port 514 in this case.
+- internal error messages are now supported up to 256 bytes
+- error message seen during config file read are now also displayed
+ to the attached tty and not only the console
+- changed some error messages during init to be sent to the console
+ and/or emergency log. Previously, they were only seen if the
+ -d (debug) option was present on the command line.
+- fixed the "2gb file issue on 32bit systems". If a file grew to
+ more than 2gb, the syslogd was aborted with "file size exceeded".
+ Now, defines have been added according to
+ http://www.daimi.au.dk/~kasperd/comp.os.linux.development.faq.html#LARGEFILE
+ Testing revealed that they work ;)
+ HOWEVER, if your file system, glibc, kernel, whatever does not
+ support files larger 2gb, you need to set a file size limit with
+ the new output channel mechanism.
+- updated man pages to reflect the changes
+
+---------------------------------------------------------------------------
+Version 0.8.4
+
+- improved -d debug output (removed developer-only content)
+- now compiles under FreeBSD and NetBSD (only quick testing done on NetBSD)
+---------------------------------------------------------------------------
+Version 0.8.3
+
+- security model in "make install" changed
+- minor doc updates
+---------------------------------------------------------------------------
+Version 0.8.2
+
+- added man page for rsyslog.conf and rsyslogd
+- gave up on the concept of rsyslog being a "drop in" replacement
+ for syslogd. Now, the user installs rsyslogd and also needs to
+ adjust his system settings to this specifically. This also lead
+ to these changes:
+ * changed Makefile so that install now installs rsyslogd instead
+ of dealing with syslogd
+ * changed the default config file name to rsyslog.conf
+---------------------------------------------------------------------------
+Version 0.8.1
+
+- fixed a nasty memory leak (probably not the last one with this release)
+- some enhancements to Makefile as suggested by Bennett Todd
+- syslogd-internal messages (like restart) were missing the hostname
+ this has been corrected
+---------------------------------------------------------------------------
+Version 0.8.0
+
+Initial testing release. Based on the sysklogd package. Thanks to the
+sysklogd maintainers for all their good work!
+---------------------------------------------------------------------------
+
+----------------------------------------------------------------------
+The following comments are from the stock syslogd.c source. They provide
+some insight into what happened to the source before we forked
+rsyslogd. However, much of the code already has been replaced and more
+is to be replaced. So over time, these comments become less valuable.
+I have moved them out of the syslogd.c file to shrink it, especially
+as a lot of them do no longer apply. For historical reasons and
+understanding of how the daemon evolved, they are probably still
+helpful.
+----------------------------------------------------------------------
+/*
+ * syslogd -- log system messages
+ *
+ * This program implements a system log. It takes a series of lines.
+ * Each line may have a priority, signified as "<n>" as
+ * the first characters of the line. If this is
+ * not present, a default priority is used.
+ *
+ * To kill syslogd, send a signal 15 (terminate). A signal 1 (hup) will
+ * cause it to reread its configuration file.
+ *
+ * Defined Constants:
+ *
+ * MAXLINE -- the maximum line length that can be handled.
+ * DEFUPRI -- the default priority for user messages
+ * DEFSPRI -- the default priority for kernel messages
+ *
+ * Author: Eric Allman
+ * extensive changes by Ralph Campbell
+ * more extensive changes by Eric Allman (again)
+ *
+ * Steve Lord: Fix UNIX domain socket code, added linux kernel logging
+ * change defines to
+ * SYSLOG_INET - listen on a UDP socket
+ * SYSLOG_UNIXAF - listen on unix domain socket
+ * SYSLOG_KERNEL - listen to linux kernel
+ *
+ * Mon Feb 22 09:55:42 CST 1993: Dr. Wettstein
+ * Additional modifications to the source. Changed priority scheme
+ * to increase the level of configurability. In its stock configuration
+ * syslogd no longer logs all messages of a certain priority and above
+ * to a log file. The * wildcard is supported to specify all priorities.
+ * Note that this is a departure from the BSD standard.
+ *
+ * Syslogd will now listen to both the inetd and the unixd socket. The
+ * strategy is to allow all local programs to direct their output to
+ * syslogd through the unixd socket while the program listens to the
+ * inetd socket to get messages forwarded from other hosts.
+ *
+ * Fri Mar 12 16:55:33 CST 1993: Dr. Wettstein
+ * Thanks to Stephen Tweedie (dcs.ed.ac.uk!sct) for helpful bug-fixes
+ * and an enlightened commentary on the prioritization problem.
+ *
+ * Changed the priority scheme so that the default behavior mimics the
+ * standard BSD. In this scenario all messages of a specified priority
+ * and above are logged.
+ *
+ * Add the ability to specify a wildcard (=) as the first character
+ * of the priority name. Doing this specifies that ONLY messages with
+ * this level of priority are to be logged. For example:
+ *
+ * *.=debug /usr/adm/debug
+ *
+ * Would log only messages with a priority of debug to the /usr/adm/debug
+ * file.
+ *
+ * Providing an * as the priority specifies that all messages are to be
+ * logged. Note that this case is degenerate with specifying a priority
+ * level of debug. The wildcard * was retained because I believe that
+ * this is more intuitive.
+ *
+ * Thu Jun 24 11:34:13 CDT 1993: Dr. Wettstein
+ * Modified sources to incorporate changes in libc4.4. Messages from
+ * syslog are now null-terminated, syslogd code now parses messages
+ * based on this termination scheme. Linux as of libc4.4 supports the
+ * fsync system call. Modified code to fsync after all writes to
+ * log files.
+ *
+ * Sat Dec 11 11:59:43 CST 1993: Dr. Wettstein
+ * Extensive changes to the source code to allow compilation with no
+ * complaints with -Wall.
+ *
+ * Reorganized the facility and priority name arrays so that they
+ * compatible with the syslog.h source found in /usr/include/syslog.h.
+ * NOTE that this should really be changed. The reason I do not
+ * allow the use of the values defined in syslog.h is on account of
+ * the extensions made to allow the wildcard character in the
+ * priority field. To fix this properly one should malloc an array,
+ * copy the contents of the array defined by syslog.h and then
+ * make whatever modifications that are desired. Next round.
+ *
+ * Thu Jan 6 12:07:36 CST 1994: Dr. Wettstein
+ * Added support for proper decomposition and re-assembly of
+ * fragment messages on UNIX domain sockets. Lack of this capability
+ * was causing 'partial' messages to be output. Since facility and
+ * priority information is encoded as a leader on the messages this
+ * was causing lines to be placed in erroneous files.
+ *
+ * Also added a patch from Shane Alderton (shane@ion.apana.org.au) to
+ * correct a problem with syslogd dumping core when an attempt was made
+ * to write log messages to a logged-on user. Thank you.
+ *
+ * Many thanks to Juha Virtanen (jiivee@hut.fi) for a series of
+ * interchanges which lead to the fixing of problems with messages set
+ * to priorities of none and emerg. Also thanks to Juha for a patch
+ * to exclude users with a class of LOGIN from receiving messages.
+ *
+ * Shane Alderton provided an additional patch to fix zombies which
+ * were conceived when messages were written to multiple users.
+ *
+ * Mon Feb 6 09:57:10 CST 1995: Dr. Wettstein
+ * Patch to properly reset the single priority message flag. Thanks
+ * to Christopher Gori for spotting this bug and forwarding a patch.
+ *
+ * Wed Feb 22 15:38:31 CST 1995: Dr. Wettstein
+ * Added version information to startup messages.
+ *
+ * Added defines so that paths to important files are taken from
+ * the definitions in paths.h. Hopefully this will insure that
+ * everything follows the FSSTND standards. Thanks to Chris Metcalf
+ * for a set of patches to provide this functionality. Also thanks
+ * Elias Levy for prompting me to get these into the sources.
+ *
+ * Wed Jul 26 18:57:23 MET DST 1995: Martin Schulze
+ * Linux' gethostname only returns the hostname and not the fqdn as
+ * expected in the code. But if you call hostname with an fqdn then
+ * gethostname will return an fqdn, so we have to mention that. This
+ * has been changed.
+ *
+ * The 'LocalDomain' and the hostname of a remote machine is
+ * converted to lower case, because the original caused some
+ * inconsistency, because the (at least my) nameserver did respond an
+ * fqdn containing of upper- _and_ lowercase letters while
+ * 'LocalDomain' consisted only of lowercase letters and that didn't
+ * match.
+ *
+ * Sat Aug 5 18:59:15 MET DST 1995: Martin Schulze
+ * Now no messages that were received from any remote host are sent
+ * out to another. At my domain this missing feature caused ugly
+ * syslog-loops, sometimes.
+ *
+ * Remember that no message is sent out. I can't figure out any
+ * scenario where it might be useful to change this behavior and to
+ * send out messages to other hosts than the one from which we
+ * received the message, but I might be shortsighted. :-/
+ *
+ * Thu Aug 10 19:01:08 MET DST 1995: Martin Schulze
+ * Added my pidfile.[ch] to it to perform a better handling with
+ * pidfiles. Now both, syslogd and klogd, can only be started
+ * once. They check the pidfile.
+ *
+ * Sun Aug 13 19:01:41 MET DST 1995: Martin Schulze
+ * Add an addition to syslog.conf's interpretation. If a priority
+ * begins with an exclamation mark ('!') the normal interpretation
+ * of the priority is inverted: ".!*" is the same as ".none", ".!=info"
+ * don't logs the info priority, ".!crit" won't log any message with
+ * the priority crit or higher. For example:
+ *
+ * mail.*;mail.!=info /usr/adm/mail
+ *
+ * Would log all messages of the facility mail except those with
+ * the priority info to /usr/adm/mail. This makes the syslogd
+ * much more flexible.
+ *
+ * Defined TABLE_ALLPRI=255 and changed some occurrences.
+ *
+ * Sat Aug 19 21:40:13 MET DST 1995: Martin Schulze
+ * Making the table of facilities and priorities while in debug
+ * mode more readable.
+ *
+ * If debugging is turned on, printing the whole table of
+ * facilities and priorities every hexadecimal or 'X' entry is
+ * now 2 characters wide.
+ *
+ * The number of the entry is prepended to each line of
+ * facilities and priorities, and F_UNUSED lines are not shown
+ * anymore.
+ *
+ * Corrected some #ifdef SYSV's.
+ *
+ * Mon Aug 21 22:10:35 MET DST 1995: Martin Schulze
+ * Corrected a strange behavior during parsing of configuration
+ * file. The original BSD syslogd doesn't understand spaces as
+ * separators between specifier and action. This syslogd now
+ * understands them. The old behavior caused some confusion over
+ * the Linux community.
+ *
+ * Thu Oct 19 00:02:07 MET 1995: Martin Schulze
+ * The default behavior has changed for security reasons. The
+ * syslogd will not receive any remote message unless you turn
+ * reception on with the "-r" option.
+ *
+ * Not defining SYSLOG_INET will result in not doing any network
+ * activity, i.e. not sending or receiving messages. I changed
+ * this because the old idea is implemented with the "-r" option
+ * and the old thing didn't work anyway.
+ *
+ * Thu Oct 26 13:14:06 MET 1995: Martin Schulze
+ * Added another logfile type F_FORW_UNKN. The problem I ran into
+ * was a name server that runs on my machine and a forwarder of
+ * kern.crit to another host. The hosts address can only be
+ * fetched using the nameserver. But named is started after
+ * syslogd, so syslogd complained.
+ *
+ * This logfile type will retry to get the address of the
+ * hostname ten times and then complain. This should be enough to
+ * get the named up and running during boot sequence.
+ *
+ * Fri Oct 27 14:08:15 1995: Dr. Wettstein
+ * Changed static array of logfiles to a dynamic array. This
+ * can grow during process.
+ *
+ * Fri Nov 10 23:08:18 1995: Martin Schulze
+ * Inserted a new tabular sys_h_errlist that contains plain text
+ * for error codes that are returned from the net subsystem and
+ * stored in h_errno. I have also changed some wrong lookups to
+ * sys_errlist.
+ *
+ * Wed Nov 22 22:32:55 1995: Martin Schulze
+ * Added the fabulous strip-domain feature that allows us to
+ * strip off (several) domain names from the fqdn and only log
+ * the simple hostname. This is useful if you're in a LAN that
+ * has a central log server and also different domains.
+ *
+ * I have also also added the -l switch do define hosts as
+ * local. These will get logged with their simple hostname, too.
+ *
+ * Thu Nov 23 19:02:56 MET DST 1995: Martin Schulze
+ * Added the possibility to omit fsyncing of logfiles after every
+ * write. This will give some performance back if you have
+ * programs that log in a very verbose manner (like innd or
+ * smartlist). Thanks to Stephen R. van den Berg <srb@cuci.nl>
+ * for the idea.
+ *
+ * Thu Jan 18 11:14:36 CST 1996: Dr. Wettstein
+ * Added patche from beta-testers to stop compile error. Also
+ * added removal of pid file as part of termination cleanup.
+ *
+ * Wed Feb 14 12:42:09 CST 1996: Dr. Wettstein
+ * Allowed forwarding of messages received from remote hosts to
+ * be controlled by a command-line switch. Specifying -h allows
+ * forwarding. The default behavior is to disable forwarding of
+ * messages which were received from a remote host.
+ *
+ * Parent process of syslogd does not exit until child process has
+ * finished initialization process. This allows rc.* startup to
+ * pause until syslogd facility is up and operating.
+ *
+ * Re-arranged the select code to move UNIX domain socket accepts
+ * to be processed later. This was a contributed change which
+ * has been proposed to correct the delays sometimes encountered
+ * when syslogd starts up.
+ *
+ * Minor code cleanups.
+ *
+ * Thu May 2 15:15:33 CDT 1996: Dr. Wettstein
+ * Fixed bug in init function which resulted in file descripters
+ * being orphaned when syslogd process was re-initialized with SIGHUP
+ * signal. Thanks to Edvard Tuinder
+ * (Edvard.Tuinder@praseodymium.cistron.nl) for putting me on the
+ * trail of this bug. I am amazed that we didn't catch this one
+ * before now.
+ *
+ * Tue May 14 00:03:35 MET DST 1996: Martin Schulze
+ * Corrected a mistake that causes the syslogd to stop logging at
+ * some virtual consoles under Linux. This was caused by checking
+ * the wrong error code. Thanks to Michael Nonweiler
+ * <mrn20@hermes.cam.ac.uk> for sending me a patch.
+ *
+ * Mon May 20 13:29:32 MET DST 1996: Miquel van Smoorenburg <miquels@cistron.nl>
+ * Added continuation line supported and fixed a bug in
+ * the init() code.
+ *
+ * Tue May 28 00:58:45 MET DST 1996: Martin Schulze
+ * Corrected behaviour of blocking pipes - i.e. the whole system
+ * hung. Michael Nonweiler <mrn20@hermes.cam.ac.uk> has sent us
+ * a patch to correct this. A new logfile type F_PIPE has been
+ * introduced.
+ *
+ * Mon Feb 3 10:12:15 MET DST 1997: Martin Schulze
+ * Corrected behaviour of logfiles if the file can't be opened.
+ * There was a bug that causes syslogd to try to log into non
+ * existing files which ate cpu power.
+ *
+ * Sun Feb 9 03:22:12 MET DST 1997: Martin Schulze
+ * Modified syslogd.c to not kill itself which confuses bash 2.0.
+ *
+ * Mon Feb 10 00:09:11 MET DST 1997: Martin Schulze
+ * Improved debug code to decode the numeric facility/priority
+ * pair into textual information.
+ *
+ * Tue Jun 10 12:35:10 MET DST 1997: Martin Schulze
+ * Corrected freeing of logfiles. Thanks to Jos Vos <jos@xos.nl>
+ * for reporting the bug and sending an idea to fix the problem.
+ *
+ * Tue Jun 10 12:51:41 MET DST 1997: Martin Schulze
+ * Removed sleep(10) from parent process. This has caused a slow
+ * startup in former times - and I don't see any reason for this.
+ *
+ * Sun Jun 15 16:23:29 MET DST 1997: Michael Alan Dorman
+ * Some more glibc patches made by <mdorman@debian.org>.
+ *
+ * Thu Jan 1 16:04:52 CET 1998: Martin Schulze <joey@infodrom.north.de
+ * Applied patch from Herbert Thielen <Herbert.Thielen@lpr.e-technik.tu-muenchen.de>.
+ * This included some balance parentheses for emacs and a bug in
+ * the exclamation mark handling.
+ *
+ * Fixed small bug which caused syslogd to write messages to the
+ * wrong logfile under some very rare conditions. Thanks to
+ * Herbert Xu <herbert@gondor.apana.org.au> for fiddling this out.
+ *
+ * Thu Jan 8 22:46:35 CET 1998: Martin Schulze <joey@infodrom.north.de>
+ * Reworked one line of the above patch as it prevented syslogd
+ * from binding the socket with the result that no messages were
+ * forwarded to other hosts.
+ *
+ * Sat Jan 10 01:33:06 CET 1998: Martin Schulze <joey@infodrom.north.de>
+ * Fixed small bugs in F_FORW_UNKN meachanism. Thanks to Torsten
+ * Neumann <torsten@londo.rhein-main.de> for pointing me to it.
+ *
+ * Mon Jan 12 19:50:58 CET 1998: Martin Schulze <joey@infodrom.north.de>
+ * Modified debug output concerning remote receiption.
+ *
+ * Mon Feb 23 23:32:35 CET 1998: Topi Miettinen <Topi.Miettinen@ml.tele.fi>
+ * Re-worked handling of Unix and UDP sockets to support closing /
+ * opening of them in order to have it open only if it is needed
+ * either for forwarding to a remote host or by receiption from
+ * the network.
+ *
+ * Wed Feb 25 10:54:09 CET 1998: Martin Schulze <joey@infodrom.north.de>
+ * Fixed little comparison mistake that prevented the MARK
+ * feature to work properly.
+ *
+ * Wed Feb 25 13:21:44 CET 1998: Martin Schulze <joey@infodrom.north.de>
+ * Corrected Topi's patch as it prevented forwarding during
+ * startup due to an unknown LogPort.
+ *
+ * Sat Oct 10 20:01:48 CEST 1998: Martin Schulze <joey@infodrom.north.de>
+ * Added support for TESTING define which will turn syslogd into
+ * stdio-mode used for debugging.
+ *
+ * Sun Oct 11 20:16:59 CEST 1998: Martin Schulze <joey@infodrom.north.de>
+ * Reworked the initialization/fork code. Now the parent
+ * process activates a signal handler which the daughter process
+ * will raise if it is initialized. Only after that one the
+ * parent process may exit. Otherwise klogd might try to flush
+ * its log cache while syslogd can't receive the messages yet.
+ *
+ * Mon Oct 12 13:30:35 CEST 1998: Martin Schulze <joey@infodrom.north.de>
+ * Redirected some error output with regard to argument parsing to
+ * stderr.
+ *
+ * Mon Oct 12 14:02:51 CEST 1998: Martin Schulze <joey@infodrom.north.de>
+ * Applied patch provided vom Topi Miettinen with regard to the
+ * people from OpenBSD. This provides the additional '-a'
+ * argument used for specifying additional UNIX domain sockets to
+ * listen to. This is been used with chroot()'ed named's for
+ * example. See for http://www.psionic.com/papers/dns.html
+ *
+ * Mon Oct 12 18:29:44 CEST 1998: Martin Schulze <joey@infodrom.north.de>
+ * Added `ftp' facility which was introduced in glibc version 2.
+ * It's #ifdef'ed so won't harm with older libraries.
+ *
+ * Mon Oct 12 19:59:21 MET DST 1998: Martin Schulze <joey@infodrom.north.de>
+ * Code cleanups with regard to bsd -> posix transition and
+ * stronger security (buffer length checking). Thanks to Topi
+ * Miettinen <tom@medialab.sonera.net>
+ * . index() --> strchr()
+ * . sprintf() --> snprintf()
+ * . bcopy() --> memcpy()
+ * . bzero() --> memset()
+ * . UNAMESZ --> UT_NAMESIZE
+ * . sys_errlist --> strerror()
+ *
+ * Mon Oct 12 20:22:59 CEST 1998: Martin Schulze <joey@infodrom.north.de>
+ * Added support for setutent()/getutent()/endutend() instead of
+ * binary reading the UTMP file. This is the the most portable
+ * way. This allows /var/run/utmp format to change, even to a
+ * real database or utmp daemon. Also if utmp file locking is
+ * implemented in libc, syslog will use it immediately. Thanks
+ * to Topi Miettinen <tom@medialab.sonera.net>.
+ *
+ * Mon Oct 12 20:49:18 MET DST 1998: Martin Schulze <joey@infodrom.north.de>
+ * Avoid logging of SIGCHLD when syslogd is in the process of
+ * exiting and closing its files. Again thanks to Topi.
+ *
+ * Mon Oct 12 22:18:34 CEST 1998: Martin Schulze <joey@infodrom.north.de>
+ * Modified printline() to support 8bit characters - such as
+ * russion letters. Thanks to Vladas Lapinskas <lapinskas@mail.iae.lt>.
+ *
+ * Sat Nov 14 02:29:37 CET 1998: Martin Schulze <joey@infodrom.north.de>
+ * ``-m 0'' now turns of MARK logging entirely.
+ *
+ * Tue Jan 19 01:04:18 MET 1999: Martin Schulze <joey@infodrom.north.de>
+ * Finally fixed an error with `-a' processing, thanks to Topi
+ * Miettinen <tom@medialab.sonera.net>.
+ *
+ * Sun May 23 10:08:53 CEST 1999: Martin Schulze <joey@infodrom.north.de>
+ * Removed superflous call to utmpname(). The path to the utmp
+ * file is defined in the used libc and should not be hardcoded
+ * into the syslogd binary referring the system it was compiled on.
+ *
+ * Sun Sep 17 20:45:33 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
+ * Fixed some bugs in printline() code that did not escape
+ * control characters '\177' through '\237' and contained a
+ * single-byte buffer overflow. Thanks to Solar Designer
+ * <solar@false.com>.
+ *
+ * Sun Sep 17 21:26:16 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
+ * Don't close open sockets upon reload. Thanks to Bill
+ * Nottingham.
+ *
+ * Mon Sep 18 09:10:47 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
+ * Fixed bug in printchopped() that caused syslogd to emit
+ * kern.emerg messages when splitting long lines. Thanks to
+ * Daniel Jacobowitz <dan@debian.org> for the fix.
+ *
+ * Mon Sep 18 15:33:26 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
+ * Removed unixm/unix domain sockets and switch to Datagram Unix
+ * Sockets. This should remove one possibility to play DoS with
+ * syslogd. Thanks to Olaf Kirch <okir@caldera.de> for the patch.
+ *
+ * Sun Mar 11 20:23:44 CET 2001: Martin Schulze <joey@infodrom.ffis.de>
+ * Don't return a closed fd if `-a' is called with a wrong path.
+ * Thanks to Bill Nottingham <notting@redhat.com> for providing
+ * a patch.
+ *
+ * The following copyright and license applies to the original
+ * sysklogd package that was used as a basis for this release of
+ * rsyslogd. Obviously, it applies to those parts stemming directly
+ * back to the original sysklogd package.
+ *
+ * Copyright (c) 1983, 1988 Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by the University of California, Berkeley. The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
diff --git a/Makefile b/Makefile
index 301765e2..913f1ca3 100644
--- a/Makefile
+++ b/Makefile
@@ -1,11 +1,684 @@
-# Copyright (C) 2004-2007 Rainer Gerhards and Adiscon GmbH
-# this is no longer the real make file. To prevent install
-# errors, it displays instructions on how to go to the
-# right spot.
-# For details, see http://www.rsyslog.com/doc
-
-default:
- # ERROR: you need to switch to the distro-specific subdirectory and call make
- # from there. If in doubt, use the linux subdirectory!
- # for doc, see http://www.rsyslog.com/doc and look for the install howto!
- # NO WORK HAS BEEN DONE by this make invokation.
+# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+pkgdatadir = $(datadir)/rsyslog
+pkglibdir = $(libdir)/rsyslog
+pkgincludedir = $(includedir)/rsyslog
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+bin_PROGRAMS = klogd$(EXEEXT) rfc3195d$(EXEEXT) syslogd$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
+ compile depcomp install-sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(bin_PROGRAMS)
+am_klogd_OBJECTS = klogd.$(OBJEXT) syslog.$(OBJEXT) pidfile.$(OBJEXT) \
+ ksym.$(OBJEXT)
+klogd_OBJECTS = $(am_klogd_OBJECTS)
+klogd_LDADD = $(LDADD)
+am_rfc3195d_OBJECTS = rfc3195d.$(OBJEXT)
+rfc3195d_OBJECTS = $(am_rfc3195d_OBJECTS)
+rfc3195d_LDADD = $(LDADD)
+am_syslogd_OBJECTS = syslogd-syslogd.$(OBJEXT) \
+ syslogd-pidfile.$(OBJEXT) syslogd-template.$(OBJEXT) \
+ syslogd-outchannel.$(OBJEXT) syslogd-stringbuf.$(OBJEXT) \
+ syslogd-srUtils.$(OBJEXT) syslogd-parse.$(OBJEXT)
+syslogd_OBJECTS = $(am_syslogd_OBJECTS)
+am__DEPENDENCIES_1 =
+syslogd_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+ $(am__DEPENDENCIES_1)
+DEFAULT_INCLUDES = -I.
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(klogd_SOURCES) $(rfc3195d_SOURCES) $(syslogd_SOURCES)
+DIST_SOURCES = $(klogd_SOURCES) $(rfc3195d_SOURCES) $(syslogd_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = ${SHELL} /home/rger/proj/rsyslog/missing --run aclocal-1.10
+AMTAR = ${SHELL} /home/rger/proj/rsyslog/missing --run tar
+AUTOCONF = ${SHELL} /home/rger/proj/rsyslog/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/rger/proj/rsyslog/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/rger/proj/rsyslog/missing --run automake-1.10
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2
+CPP = gcc -E
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+EGREP = /bin/grep -E
+EXEEXT =
+GREP = /bin/grep
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+LDFLAGS =
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/rger/proj/rsyslog/missing --run makeinfo
+MKDIR_P = /bin/mkdir -p
+MYSQL_CONFIG =
+OBJEXT = o
+PACKAGE = rsyslog
+PACKAGE_BUGREPORT = rsyslog@lists.adiscon.com.
+PACKAGE_NAME = rsyslog
+PACKAGE_STRING = rsyslog 1.16.0
+PACKAGE_TARNAME = rsyslog
+PACKAGE_VERSION = 1.16.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+VERSION = 1.16.0
+abs_builddir = /home/rger/proj/rsyslog
+abs_srcdir = /home/rger/proj/rsyslog
+abs_top_builddir = /home/rger/proj/rsyslog
+abs_top_srcdir = /home/rger/proj/rsyslog
+ac_ct_CC = gcc
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host_alias =
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = $(SHELL) /home/rger/proj/rsyslog/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+mysql_includes =
+mysql_libs =
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+pthreads_libs = -lpthread
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias =
+top_builddir = .
+top_srcdir = .
+zlib_libs = -lz
+klogd_SOURCES = klogd.c syslog.c pidfile.c ksym.c
+rfc3195d_SOURCES = rfc3195d.c
+syslogd_SOURCES = syslogd.c pidfile.c template.c outchannel.c stringbuf.c srUtils.c parse.c
+syslogd_CPPFLAGS = $(mysql_includes)
+syslogd_LDADD = $(mysql_libs) $(zlib_libs) $(pthreads_libs)
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+ cd $(srcdir) && $(AUTOMAKE) --gnu \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+ @if test ! -f $@; then \
+ rm -f stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+ else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: $(am__configure_deps)
+ cd $(top_srcdir) && $(AUTOHEADER)
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ if test -f $$p \
+ ; then \
+ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+ else :; fi; \
+ done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+ rm -f "$(DESTDIR)$(bindir)/$$f"; \
+ done
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+klogd$(EXEEXT): $(klogd_OBJECTS) $(klogd_DEPENDENCIES)
+ @rm -f klogd$(EXEEXT)
+ $(LINK) $(klogd_OBJECTS) $(klogd_LDADD) $(LIBS)
+rfc3195d$(EXEEXT): $(rfc3195d_OBJECTS) $(rfc3195d_DEPENDENCIES)
+ @rm -f rfc3195d$(EXEEXT)
+ $(LINK) $(rfc3195d_OBJECTS) $(rfc3195d_LDADD) $(LIBS)
+syslogd$(EXEEXT): $(syslogd_OBJECTS) $(syslogd_DEPENDENCIES)
+ @rm -f syslogd$(EXEEXT)
+ $(LINK) $(syslogd_OBJECTS) $(syslogd_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+include ./$(DEPDIR)/klogd.Po
+include ./$(DEPDIR)/ksym.Po
+include ./$(DEPDIR)/pidfile.Po
+include ./$(DEPDIR)/rfc3195d.Po
+include ./$(DEPDIR)/syslog.Po
+include ./$(DEPDIR)/syslogd-outchannel.Po
+include ./$(DEPDIR)/syslogd-parse.Po
+include ./$(DEPDIR)/syslogd-pidfile.Po
+include ./$(DEPDIR)/syslogd-srUtils.Po
+include ./$(DEPDIR)/syslogd-stringbuf.Po
+include ./$(DEPDIR)/syslogd-syslogd.Po
+include ./$(DEPDIR)/syslogd-template.Po
+
+.c.o:
+ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+# source='$<' object='$@' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(COMPILE) -c $<
+
+.c.obj:
+ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+# source='$<' object='$@' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+syslogd-syslogd.o: syslogd.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-syslogd.o -MD -MP -MF $(DEPDIR)/syslogd-syslogd.Tpo -c -o syslogd-syslogd.o `test -f 'syslogd.c' || echo '$(srcdir)/'`syslogd.c
+ mv -f $(DEPDIR)/syslogd-syslogd.Tpo $(DEPDIR)/syslogd-syslogd.Po
+# source='syslogd.c' object='syslogd-syslogd.o' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-syslogd.o `test -f 'syslogd.c' || echo '$(srcdir)/'`syslogd.c
+
+syslogd-syslogd.obj: syslogd.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-syslogd.obj -MD -MP -MF $(DEPDIR)/syslogd-syslogd.Tpo -c -o syslogd-syslogd.obj `if test -f 'syslogd.c'; then $(CYGPATH_W) 'syslogd.c'; else $(CYGPATH_W) '$(srcdir)/syslogd.c'; fi`
+ mv -f $(DEPDIR)/syslogd-syslogd.Tpo $(DEPDIR)/syslogd-syslogd.Po
+# source='syslogd.c' object='syslogd-syslogd.obj' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-syslogd.obj `if test -f 'syslogd.c'; then $(CYGPATH_W) 'syslogd.c'; else $(CYGPATH_W) '$(srcdir)/syslogd.c'; fi`
+
+syslogd-pidfile.o: pidfile.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-pidfile.o -MD -MP -MF $(DEPDIR)/syslogd-pidfile.Tpo -c -o syslogd-pidfile.o `test -f 'pidfile.c' || echo '$(srcdir)/'`pidfile.c
+ mv -f $(DEPDIR)/syslogd-pidfile.Tpo $(DEPDIR)/syslogd-pidfile.Po
+# source='pidfile.c' object='syslogd-pidfile.o' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-pidfile.o `test -f 'pidfile.c' || echo '$(srcdir)/'`pidfile.c
+
+syslogd-pidfile.obj: pidfile.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-pidfile.obj -MD -MP -MF $(DEPDIR)/syslogd-pidfile.Tpo -c -o syslogd-pidfile.obj `if test -f 'pidfile.c'; then $(CYGPATH_W) 'pidfile.c'; else $(CYGPATH_W) '$(srcdir)/pidfile.c'; fi`
+ mv -f $(DEPDIR)/syslogd-pidfile.Tpo $(DEPDIR)/syslogd-pidfile.Po
+# source='pidfile.c' object='syslogd-pidfile.obj' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-pidfile.obj `if test -f 'pidfile.c'; then $(CYGPATH_W) 'pidfile.c'; else $(CYGPATH_W) '$(srcdir)/pidfile.c'; fi`
+
+syslogd-template.o: template.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-template.o -MD -MP -MF $(DEPDIR)/syslogd-template.Tpo -c -o syslogd-template.o `test -f 'template.c' || echo '$(srcdir)/'`template.c
+ mv -f $(DEPDIR)/syslogd-template.Tpo $(DEPDIR)/syslogd-template.Po
+# source='template.c' object='syslogd-template.o' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-template.o `test -f 'template.c' || echo '$(srcdir)/'`template.c
+
+syslogd-template.obj: template.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-template.obj -MD -MP -MF $(DEPDIR)/syslogd-template.Tpo -c -o syslogd-template.obj `if test -f 'template.c'; then $(CYGPATH_W) 'template.c'; else $(CYGPATH_W) '$(srcdir)/template.c'; fi`
+ mv -f $(DEPDIR)/syslogd-template.Tpo $(DEPDIR)/syslogd-template.Po
+# source='template.c' object='syslogd-template.obj' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-template.obj `if test -f 'template.c'; then $(CYGPATH_W) 'template.c'; else $(CYGPATH_W) '$(srcdir)/template.c'; fi`
+
+syslogd-outchannel.o: outchannel.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-outchannel.o -MD -MP -MF $(DEPDIR)/syslogd-outchannel.Tpo -c -o syslogd-outchannel.o `test -f 'outchannel.c' || echo '$(srcdir)/'`outchannel.c
+ mv -f $(DEPDIR)/syslogd-outchannel.Tpo $(DEPDIR)/syslogd-outchannel.Po
+# source='outchannel.c' object='syslogd-outchannel.o' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-outchannel.o `test -f 'outchannel.c' || echo '$(srcdir)/'`outchannel.c
+
+syslogd-outchannel.obj: outchannel.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-outchannel.obj -MD -MP -MF $(DEPDIR)/syslogd-outchannel.Tpo -c -o syslogd-outchannel.obj `if test -f 'outchannel.c'; then $(CYGPATH_W) 'outchannel.c'; else $(CYGPATH_W) '$(srcdir)/outchannel.c'; fi`
+ mv -f $(DEPDIR)/syslogd-outchannel.Tpo $(DEPDIR)/syslogd-outchannel.Po
+# source='outchannel.c' object='syslogd-outchannel.obj' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-outchannel.obj `if test -f 'outchannel.c'; then $(CYGPATH_W) 'outchannel.c'; else $(CYGPATH_W) '$(srcdir)/outchannel.c'; fi`
+
+syslogd-stringbuf.o: stringbuf.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-stringbuf.o -MD -MP -MF $(DEPDIR)/syslogd-stringbuf.Tpo -c -o syslogd-stringbuf.o `test -f 'stringbuf.c' || echo '$(srcdir)/'`stringbuf.c
+ mv -f $(DEPDIR)/syslogd-stringbuf.Tpo $(DEPDIR)/syslogd-stringbuf.Po
+# source='stringbuf.c' object='syslogd-stringbuf.o' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-stringbuf.o `test -f 'stringbuf.c' || echo '$(srcdir)/'`stringbuf.c
+
+syslogd-stringbuf.obj: stringbuf.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-stringbuf.obj -MD -MP -MF $(DEPDIR)/syslogd-stringbuf.Tpo -c -o syslogd-stringbuf.obj `if test -f 'stringbuf.c'; then $(CYGPATH_W) 'stringbuf.c'; else $(CYGPATH_W) '$(srcdir)/stringbuf.c'; fi`
+ mv -f $(DEPDIR)/syslogd-stringbuf.Tpo $(DEPDIR)/syslogd-stringbuf.Po
+# source='stringbuf.c' object='syslogd-stringbuf.obj' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-stringbuf.obj `if test -f 'stringbuf.c'; then $(CYGPATH_W) 'stringbuf.c'; else $(CYGPATH_W) '$(srcdir)/stringbuf.c'; fi`
+
+syslogd-srUtils.o: srUtils.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-srUtils.o -MD -MP -MF $(DEPDIR)/syslogd-srUtils.Tpo -c -o syslogd-srUtils.o `test -f 'srUtils.c' || echo '$(srcdir)/'`srUtils.c
+ mv -f $(DEPDIR)/syslogd-srUtils.Tpo $(DEPDIR)/syslogd-srUtils.Po
+# source='srUtils.c' object='syslogd-srUtils.o' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-srUtils.o `test -f 'srUtils.c' || echo '$(srcdir)/'`srUtils.c
+
+syslogd-srUtils.obj: srUtils.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-srUtils.obj -MD -MP -MF $(DEPDIR)/syslogd-srUtils.Tpo -c -o syslogd-srUtils.obj `if test -f 'srUtils.c'; then $(CYGPATH_W) 'srUtils.c'; else $(CYGPATH_W) '$(srcdir)/srUtils.c'; fi`
+ mv -f $(DEPDIR)/syslogd-srUtils.Tpo $(DEPDIR)/syslogd-srUtils.Po
+# source='srUtils.c' object='syslogd-srUtils.obj' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-srUtils.obj `if test -f 'srUtils.c'; then $(CYGPATH_W) 'srUtils.c'; else $(CYGPATH_W) '$(srcdir)/srUtils.c'; fi`
+
+syslogd-parse.o: parse.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-parse.o -MD -MP -MF $(DEPDIR)/syslogd-parse.Tpo -c -o syslogd-parse.o `test -f 'parse.c' || echo '$(srcdir)/'`parse.c
+ mv -f $(DEPDIR)/syslogd-parse.Tpo $(DEPDIR)/syslogd-parse.Po
+# source='parse.c' object='syslogd-parse.o' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-parse.o `test -f 'parse.c' || echo '$(srcdir)/'`parse.c
+
+syslogd-parse.obj: parse.c
+ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-parse.obj -MD -MP -MF $(DEPDIR)/syslogd-parse.Tpo -c -o syslogd-parse.obj `if test -f 'parse.c'; then $(CYGPATH_W) 'parse.c'; else $(CYGPATH_W) '$(srcdir)/parse.c'; fi`
+ mv -f $(DEPDIR)/syslogd-parse.Tpo $(DEPDIR)/syslogd-parse.Po
+# source='parse.c' object='syslogd-parse.obj' libtool=no \
+# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-parse.obj `if test -f 'parse.c'; then $(CYGPATH_W) 'parse.c'; else $(CYGPATH_W) '$(srcdir)/parse.c'; fi`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d $(distdir) || mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) config.h
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-hdr distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+ clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \
+ dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
+ distclean-compile distclean-generic distclean-hdr \
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-binPROGRAMS install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 00000000..ba0f70e3
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,11 @@
+
+bin_PROGRAMS=klogd rfc3195d syslogd
+
+klogd_SOURCES=klogd.c syslog.c pidfile.c ksym.c
+
+rfc3195d_SOURCES=rfc3195d.c
+
+syslogd_SOURCES=syslogd.c pidfile.c template.c outchannel.c stringbuf.c srUtils.c parse.c
+syslogd_CPPFLAGS=$(mysql_includes)
+syslogd_LDADD=$(mysql_libs) $(zlib_libs) $(pthreads_libs)
+
diff --git a/NEWS b/NEWS
index f9c9a968..1b14f65e 100644
--- a/NEWS
+++ b/NEWS
@@ -1,953 +1 @@
----------------------------------------------------------------------------
-Version 1.15.1 (RGer), 2007-07-10
-- fixed a bug that caused a dynaFile selector to stall when there was
- an open error with one file
-- improved template processing for dynaFiles; templates are now only
- looked up during initialization - speeds up processing
-- optimized memory layout in struct filed when compiled with MySQL
- support
-- fixed a bug that caused compilation without SYSLOG_INET to fail
-- re-enabled the "last message repeated n times" feature. This
- feature was not taken care of while rsyslogd evolved from sysklogd
- and it was more or less defunct. Now it is fully functional again.
-- added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE
-- fixed a bug in iovAsString() that caused a memory leak under stress
- conditions (most probably memory shortage). This was unlikely to
- ever happen, but it doesn't hurt doing it right
-- cosmetic: defined type "uchar", change all unsigned chars to uchar
----------------------------------------------------------------------------
-Version 1.15.0 (RGer), 2007-07-05
-- added ability to dynamically generate file names based on templates
- and thus properties. This was a much-requested feature. It makes
- life easy when it e.g. comes to splitting files based on the sender
- address.
-- added $umask and $FileCreateMode config file directives
-- applied a patch from Bartosz Kuzma to compile cleanly under NetBSD
-- checks for extra (unexpected) characters in system config file lines
- have been added
-- added IPv6 documentation - was accidently missing from CVS
-- begun to change char to unsigned char
----------------------------------------------------------------------------
-Version 1.14.2 (RGer), 2007-07-03
-** this release fixes all known nits with IPv6 **
-- restored capability to do /etc/service lookup for "syslog"
- service when -r 0 was given
-- documented IPv6 handling of syslog messages
-- integrate patch from Bartosz Kuźma to make rsyslog compile under
- Solaris again (the patch replaced a strndup() call, which is not
- available under Solaris
-- improved debug logging when waiting on select
-- updated rsyslogd man page with new options (-46A)
----------------------------------------------------------------------------
-Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29
-- added Peter Vrabec's patch for IPv6 TCP
-- prefixed all messages send to stderr in rsyslogd with "rsyslogd: "
----------------------------------------------------------------------------
-Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28
-- Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled
- IPv6 Support is currently for UDP only, TCP is to come soon.
- AllowedSender configuration does not yet work for IPv6.
-- fixed code in iovCreate() that broke C's strict aliasing rules
-- fixed some char/unsigned char differences that forced the compiler
- to spit out warning messages
-- updated the Red Hat init script to fix a known issue (thanks to
- Peter Vrabec)
----------------------------------------------------------------------------
-Version 1.13.5 (RGer), 2007-06-22
-- made the TCP session limit configurable via command line switch
- now -t <port>,<max sessions>
-- added man page for rklogd(8) (basically a copy from klogd, but now
- there is one...)
-- fixed a bug that caused internal messages (e.g. rsyslogd startup) to
- appear without a tag.
-- removed a minor memory leak that occurred when TAG processing requalified
- a HOSTNAME to be a TAG (and a TAG already was set).
-- removed potential small memory leaks in MsgSet***() functions. There
- would be a leak if a property was re-set, something that happened
- extremely seldom.
----------------------------------------------------------------------------
-Version 1.13.4 (RGer), 2007-06-18
-- added a new property "PRI-text", which holds the PRI field in
- textual form (e.g. "syslog.info")
-- added alias "syslogseverity" for "syslogpriority", which is a
- misleading property name that needs to stay for historical
- reasons (and backward-compatility)
-- added doc on how to record PRI value in log file
-- enhanced signal handling in klogd, including removal of an unsafe
- call to the logging system during signal handling
----------------------------------------------------------------------------
-Version 1.13.3 (RGer), 2007-06-15
-- create a version of syslog.c from scratch. This is now
- - highly optimized for rsyslog
- - removes an incompatible license problem as the original
- version had a BSD license with advertising clause
- - fixed in the regard that rklogd will continue to work when
- rsysogd has been restarted (the original version, as well
- as sysklogd, will remain silent then)
- - solved an issue with an extra NUL char at message end that the
- original version had
-- applied some changes to klogd to care for the new interface
-- fixed a bug in syslogd.c which prevented compiling under debian
----------------------------------------------------------------------------
-Version 1.13.2 (RGer), 2007-06-13
-- lib order in makefile patched to facilitate static linking - thanks
- to Bennett Todd for providing the patch
-- Integrated a patch from Peter Vrabec (pvrabec@redheat.com):
- - added klogd under the name of rklogd (remove dependency on
- original sysklogd package
- - createDB.sql now in UTF
- - added additional config files for use on Red Hat
----------------------------------------------------------------------------
-Version 1.13.1 (RGer), 2007-02-05
-- changed the listen backlog limit to a more reasonable value based on
- the maximum number of TCP connections configurd (10% + 5) - thanks to Guy
- Standen for the hint (actually, the limit was 5 and that was a
- left-over from early testing).
-- fixed a bug in makefile which caused DB-support to be disabled when
- NETZIP support was enabled
-- added the -e option to allow transmission of every message to remote
- hosts (effectively turns off duplicate message suppression)
-- (somewhat) improved memory consumption when compiled with MySQL support
-- looks like we fixed an incompatibility with MySQL 5.x and above software
- At least in one case, the remote server name was destroyed, leading to
- a connection failure. The new, improved code does not have this issue and
- so we see this as solved (the new code is generally somewhat better, so
- there is a good chance we fixed this incompatibility).
----------------------------------------------------------------------------
-Version 1.13.0 (RGer), 2006-12-19
-- added '$' as ToPos proptery replacer specifier - means "up to the
- end of the string"
-- property replacer option "escape-cc", "drop-cc" and "space-cc" added
-- changed the handling of \0 characters inside syslog messages. We now
- consistently escape them to "#000". This is somewhat recommended in
- the draft-ietf-syslog-protocol-19 draft. While the real recomendation
- is to not escape any characters at all, we can not do this without
- considerable modification of the code. So we escape it to "#000", which
- is consistent with a sample found in the Internet-draft.
-- removed message glue logic (see printchopped() comment for details)
- Also caused removal of parts table and thus some improvements in
- memory usage.
-- changed the default MAXLINE to 2048 to take care of recent syslog
- standardization efforts (can easily be changed in syslogd.c)
-- added support for byte-counted TCP syslog messages (much like
- syslog-transport-tls-05 Internet Draft). This was necessary to
- support compression over TCP.
-- added support for receiving compressed syslog messages
-- added support for sending compressed syslog messages
-- fixed a bug where the last message in a syslog/tcp stream was
- lost if it was not properly terminated by a LF character
----------------------------------------------------------------------------
-Version 1.12.3 (RGer), 2006-10-04
-- implemented some changes to support Solaris (but support is not
- yet complete)
-- commented out (via #if 0) some methods that are currently not being use
- but should be kept for further us
-- added (interim) -u 1 option to turn off hostname and tag parsing
-- done some modifications to better support Fedora
-- made the field delimiter inside property replace configurable via
- template
-- fixed a bug in property replacer: if fields were used, the delimitor
- became part of the field. Up until now, this was barely noticable as
- the delimiter as TAB only and thus invisible to a human. With other
- delimiters available now, it quickly showed up. This bug fix might cause
- some grief to existing installations if they used the extra TAB for
- whatever reasons - sorry folks... Anyhow, a solution is easy: just add
- a TAB character contstant into your template. Thus, there has no attempt
- been made to do this in a backwards-compatible way.
----------------------------------------------------------------------------
-Version 1.12.2 (RGer), 2006-02-15
-- fixed a bug in the RFC 3339 date formatter. An extra space was added
- after the actual timestamp
-- added support for providing high-precision RFC3339 timestamps for
- (rsyslogd-)internally-generated messages
-- very (!) experimental support for syslog-protocol internet draft
- added (the draft is experimental, the code is solid ;))
-- added support for field-extracting in the property replacer
-- enhanced the legacy-syslog parser so that it can interpret messages
- that do not contain a TIMESTAMP
-- fixed a bug that caused the default socket (usually /dev/log) to be
- opened even when -o command line option was given
-- fixed a bug in the Debian sample startup script - it caused rsyslogd
- to listen to remote requests, which it shouldn't by default
----------------------------------------------------------------------------
-Version 1.12.1 (RGer), 2005-11-23
-- made multithreading work with BSD. Some signal-handling needed to be
- restructured. Also, there might be a slight delay of up to 10 seconds
- when huping and terminating rsyslogd under BSD
-- fixed a bug where a NULL-pointer was passed to printf() in logmsg().
-- fixed a bug during "make install" where rc3195d was not installed
- Thanks to Bennett Todd for spotting this.
-- fixed a bug where rsyslogd dumped core when no TAG was found in the
- received message
-- enhanced message parser so that it can deal with missing hostnames
- in many cases (may not be totally fail-safe)
-- fixed a bug where internally-generated messages did not have the correct
- TAG
----------------------------------------------------------------------------
-Version 1.12.0 (RGer), 2005-10-26
-- moved to a multi-threaded design. single-threading is still optionally
- available. Multi-threading is experimental!
-- fixed a potential race condition. In the original code, marking was done
- by an alarm handler, which could lead to all sorts of bad things. This
- has been changed now. See comments in syslogd.c/domark() for details.
-- improved debug output for property-based filters
-- not a code change, but: I have checked all exit()s to make sure that
- none occurs once rsyslogd has started up. Even in unusual conditions
- (like low-memory conditions) rsyslogd somehow remains active. Of course,
- it might loose a message or two, but at least it does not abort and it
- can also recover when the condition no longer persists.
-- fixed a bug that could cause loss of the last message received
- immediately before rsyslogd was terminated.
-- added comments on thread-safety of global variables in syslogd.c
-- fixed a small bug: spurios printf() when TCP syslog was used
-- fixed a bug that causes rsyslogd to dump core on termination when one
- of the selector lines did not receive a message during the run (very
- unlikely)
-- fixed an one-too-low memory allocation in the TCP sender. Could result
- in rsyslogd dumping core.
-- fixed a bug with regular expression support (thanks to Andres Riancho)
-- a little bit of code restructuring (especially main(), which was
- horribly large)
----------------------------------------------------------------------------
-Version 1.11.1 (RGer), 2005-10-19
-- support for BSD-style program name and host blocks
-- added a new property "programname" that can be used in templates
-- added ability to specify listen port for rfc3195d
-- fixed a bug that rendered the "startswith" comparison operation
- unusable.
-- changed more functions to "static" storage class to help compiler
- optimize (should have been static in the first place...)
-- fixed a potential memory leak in the string buffer class destructor.
- As the destructur was previously never called, the leak did not actually
- appear.
-- some internal restructuring in anticipation/preparation of minimal
- multi-threading support
-- rsyslogd still shares some code with the sysklogd project. Some patches
- for this shared code have been brought over from the sysklogd CVS.
----------------------------------------------------------------------------
-Version 1.11.0 (RGer), 2005-10-12
-- support for receiving messages via RFC 3195; added rfc3195d for that
- purpose
-- added an additional guard to prevent rsyslogd from aborting when the
- 2gb file size limit is hit. While a user can configure rsyslogd to
- handle such situations, it would abort if that was not done AND large
- file support was not enabled (ok, this is hopefully an unlikely scenario)
-- fixed a bug that caused additional Unix domain sockets to be incorrectly
- processed - could lead to message loss in extreme cases
----------------------------------------------------------------------------
-Version 1.10.2 (RGer), 2005-09-27
-- added comparison operations in property-based filters:
- * isequal
- * startswith
-- added ability to negate all property-based filter comparison operations
- by adding a !-sign right in front of the operation name
-- added the ability to specify remote senders for UDP and TCP
- received messages. Allows to block all but well-known hosts
-- changed the $-config line directives to be case-INsensitive
-- new command line option -w added: "do not display warnings if messages
- from disallowed senders are received"
-- fixed a bug that caused rsyslogd to dump core when the compare value
- was not quoted in property-based filters
-- fixed a bug in the new CStr compare function which lead to invalid
- results (fortunately, this function was not yet used widely)
-- added better support for "debugging" rsyslog.conf property filters
- (only if -d switch is given)
-- changed some function definitions to static, which eventually enables
- some compiler optimizations
-- fixed a bug in MySQL code; when a SQL error occured, rsyslogd could
- run in a tight loop. This was due to invalid sequence of error reporting
- and is now fixed.
----------------------------------------------------------------------------
-Version 1.10.1 (RGer), 2005-09-23
-- added the ability to execute a shell script as an action.
- Thanks to Bjoern Kalkbrenner for providing the code!
-- fixed a bug in the MySQL code; due to the bug the automatic one-time
- retry after an error did not happen - this lead to error message in
- cases where none should be seen (e.g. after a MySQL restart)
-- fixed a security issue with SQL-escaping in conjunction with
- non-(SQL-)standard MySQL features.
----------------------------------------------------------------------------
-Version 1.10.0 (RGer), 2005-09-20
- REMINDER: 1.10 is the first unstable version if the 1.x series!
-- added the capability to filter on any property in selector lines
- (not just facility and priority)
-- changed stringbuf into a new counted string class
-- added support for a "discard" action. If a selector line with
- discard (~ character) is found, no selector lines *after* that
- line will be processed.
-- thanks to Andres Riancho, regular expression support has been
- added to the template engine
-- added the FROMHOST property in the template processor, which could
- previously not be obtained. Thanks to Cristian Testa for pointing
- this out and even providing a fix.
-- added display of compile-time options to -v output
-- performance improvement for production build - made some checks
- to happen only during debug mode
-- fixed a problem with compiling on SUSE and - while doing so - removed
- the socket call to set SO_BSDCOMPAT in cases where it is obsolete.
----------------------------------------------------------------------------
-Version 1.0.4 (RGer), 2006-02-01
-- a small but important fix: the tcp receiver had two forgotten printf's
- in it that caused a lot of unnecessary output to stdout. This was
- important enough to justify a new release
----------------------------------------------------------------------------
-Version 1.0.3 (RGer), 2005-11-14
-- added an additional guard to prevent rsyslogd from aborting when the
- 2gb file size limit is hit. While a user can configure rsyslogd to
- handle such situations, it would abort if that was not done AND large
- file support was not enabled (ok, this is hopefully an unlikely scenario)
-- fixed a bug that caused additional Unix domain sockets to be incorrectly
- processed - could lead to message loss in extreme cases
-- applied some patches available from the sysklogd project to code
- shared from there
-- fixed a bug that causes rsyslogd to dump core on termination when one
- of the selector lines did not receive a message during the run (very
- unlikely)
-- fixed an one-too-low memory allocation in the TCP sender. Could result
- in rsyslogd dumping core.
-- fixed a bug in the TCP sender that caused the retry logic to fail
- after an error or receiver overrun
-- fixed a bug in init() that could lead to dumping core
-- fixed a bug that could lead to dumping core when no HOSTNAME or no TAG
- was present in the syslog message
----------------------------------------------------------------------------
-Version 1.0.2 (RGer), 2005-10-05
-- fixed an issue with MySQL error reporting. When an error occured,
- the MySQL driver went into an endless loop (at least in most cases).
----------------------------------------------------------------------------
-Version 1.0.1 (RGer), 2005-09-23
-- fixed a security issue with SQL-escaping in conjunction with
- non-(SQL-)standard MySQL features.
----------------------------------------------------------------------------
-Version 1.0.0 (RGer), 2005-09-12
-- changed install doc to cover daily cron scripts - a trouble source
-- added rc script for slackware (provided by Chris Elvidge - thanks!)
-- fixed a really minor bug in usage() - the -r option was still
- reported as without the port parameter
----------------------------------------------------------------------------
-Version 0.9.8 (RGer), 2005-09-05
-- made startup and shutdown message more consistent and included the
- pid, so that they can be easier correlated. Used syslog-protocol
- structured data format for this purpose.
-- improved config info in startup message, now tells not only
- if it is listening remote on udp, but also for tcp. Also includes
- the port numbers. The previous startup message was misleading, because
- it did not say "remote reception" if rsyslogd was only listening via
- tcp (but not via udp).
-- added a "how can you help" document to the doc set
----------------------------------------------------------------------------
-Version 0.9.7 (RGer), 2005-08-15
-- some of the previous doc files (like INSTALL) did not properly
- reflect the changes to the build process and the new doc. Fixed
- that.
-- changed syslogd.c so that when compiled without database support,
- an error message is displayed when a database action is detected
- in the config file (previously this was used as an user rule ;))
-- fixed a bug in the os-specific Makefiles which caused MySQL
- support to not be compiled, even if selected
----------------------------------------------------------------------------
-Version 0.9.6 (RGer), 2005-08-09
-- greatly enhanced documentation. Now available in html format in
- the "doc" folder and FreeBSD. Finally includes an install howto.
-- improved MySQL error messages a little - they now show up as log
- messages, too (formerly only in debug mode)
-- added the ability to specify the listen port for udp syslog.
- WARNING: This introduces an incompatibility. Formerly, udp
- syslog was enabled by the -r command line option. Now, it is
- "-r [port]", which is consistent with the tcp listener. However,
- just -r will now return an error message.
-- added sample startup scripts for Debian and FreeBSD
-- added support for easy feature selection in the makefile. Un-
- fortunately, this also means I needed to spilt the make file
- for different OS and distros. There are some really bad syntax
- differences between FreeBSD and Linux make.
----------------------------------------------------------------------------
-Version 0.9.5 (RGer), 2005-08-01
-- the "semicolon bug" was actually not (fully) solved in 0.9.4. One
- part of the bug was solved, but another still existed. This one
- is fixed now, too.
-- the "semicolon bug" actually turned out to be a more generic bug.
- It appeared whenever an invalid template name was given. With some
- selector actions, rsyslogd dumped core, with other it "just" had
- a small ressource leak with others all worked well. These anomalies
- are now fixed. Note that they only appeared during system initaliziation
- once the system was running, nothing bad happened.
-- improved error reporting for template errors on startup. They are now
- shown on the console and the start-up tty. Formerly, they were only
- visible in debug mode.
-- support for multiple instances of rsyslogd on a single machine added
-- added new option "-o" --> omit local unix domain socket. This option
- enables rsyslogd NOT to listen to the local socket. This is most
- helpful when multiple instances of rsyslogd (or rsyslogd and another
- syslogd) shall run on a single system.
-- added new option "-i <pidfile>" which allows to specify the pidfile.
- This is needed when multiple instances of rsyslogd are to be run.
-- the new project home page is now online at www.rsyslog.com
----------------------------------------------------------------------------
-Version 0.9.4 (RGer), 2005-07-25
-- finally added the TCP sender. It now supports non-blocking mode, no
- longer disabling message reception during connect. As it is now, it
- is usable in production. The code could be more sophisticated, but
- I've kept it short in anticipation of the move to liblogging, which
- will lead to the removal of the code just written ;)
-- the "exiting on signal..." message still had the "syslogd" name in
- it. Changed this to "rsyslogd", as we do not have a large user base
- yet, this should pose no problem.
-- fixed "the semiconlon" bug. rsyslogd dumped core if a write-db action
- was specified but no semicolon was given after the password (an empty
- template was ok, but the semicolon needed to be present).
-- changed a default for traditional output format. During testing, it
- was seen that the timestamp written to file in default format was
- the time of message reception, not the time specified in the TIMESTAMP
- field of the message itself. Traditionally, the message TIMESTAMP is
- used and this has been changed now.
----------------------------------------------------------------------------
-Version 0.9.3 (RGer), 2005-07-19
-- fixed a bug in the message parser. In June, the RFC 3164 timestamp
- was not correctly parsed (yes, only in June and some other months,
- see the code comment to learn why...)
-- added the ability to specify the destination port when forwarding
- syslog messages (both for TCP and UDP)
-- added an very experimental TCP sender (activated by
- @@machine:port in config). This is not yet for production use. If
- the receiver is not alive, rsyslogd will wait quite some time until
- the connection request times out, which most probably leads to
- loss of incoming messages.
-
----------------------------------------------------------------------------
-Version 0.9.2 (RGer), around 2005-07-06
-- I intended to change the maxsupported message size to 32k to
- support IHE - but given the memory inefficiency in the usual use
- cases, I have not done this. I have, however, included very
- specific instructions on how to do this in the source code. I have
- also done some testing with 32k messages, so you can change the
- max size without taking too much risk.
-- added a syslog/tcp receiver; we now can receive messages via
- plain tcp, but we can still send only via UDP. The syslog/tcp
- receiver is the primary enhancement of this release.
-- slightly changed some error messages that contained a spurios \n at
- the end of the line (which gives empty lines in your log...)
-
----------------------------------------------------------------------------
-Version 0.9.1 (RGer)
-- fixed code so that it compiles without errors under FreeBSD
-- removed now unused function "allocate_log()" from syslogd.c
-- changed the make file so that it contains more defines for
- different environments (in the long term, we need a better
- system for disabling/enabling features...)
-- changed some printf's printing off_t types to %lld and
- explicit (long long) casts. I tried to figure out the exact type,
- but did not succeed in this. In the worst case, ultra-large peta-
- byte files will now display funny informational messages on rollover,
- something I think we can live with for the next 10 years or so...
-
----------------------------------------------------------------------------
-Version 0.9.0 (RGer)
-- changed the filed structure to be a linked list. Previously, it
- was a table - well, for non-SYSV it was defined as linked list,
- but from what I see that code did no longer work after my
- modifications. I am now using a linked list in general because
- that is needed for other upcoming modifications.
-- fixed a bug that caused rsyslogd not to listen to anything if
- the configuration file could not be read
-- pervious versions disabled network logging (send/receive) if
- syslog/udp port was not in /etc/services. Now defaulting to
- port 514 in this case.
-- internal error messages are now supported up to 256 bytes
-- error message seen during config file read are now also displayed
- to the attached tty and not only the console
-- changed some error messages during init to be sent to the console
- and/or emergency log. Previously, they were only seen if the
- -d (debug) option was present on the command line.
-- fixed the "2gb file issue on 32bit systems". If a file grew to
- more than 2gb, the syslogd was aborted with "file size exceeded".
- Now, defines have been added according to
- http://www.daimi.au.dk/~kasperd/comp.os.linux.development.faq.html#LARGEFILE
- Testing revealed that they work ;)
- HOWEVER, if your file system, glibc, kernel, whatever does not
- support files larger 2gb, you need to set a file size limit with
- the new output channel mechanism.
-- updated man pages to reflect the changes
-
----------------------------------------------------------------------------
-Version 0.8.4
-
-- improved -d debug output (removed developer-only content)
-- now compiles under FreeBSD and NetBSD (only quick testing done on NetBSD)
----------------------------------------------------------------------------
-Version 0.8.3
-
-- security model in "make install" changed
-- minor doc updates
----------------------------------------------------------------------------
-Version 0.8.2
-
-- added man page for rsyslog.conf and rsyslogd
-- gave up on the concept of rsyslog being a "drop in" replacement
- for syslogd. Now, the user installs rsyslogd and also needs to
- adjust his system settings to this specifically. This also lead
- to these changes:
- * changed Makefile so that install now installs rsyslogd instead
- of dealing with syslogd
- * changed the default config file name to rsyslog.conf
----------------------------------------------------------------------------
-Version 0.8.1
-
-- fixed a nasty memory leak (probably not the last one with this release)
-- some enhancements to Makefile as suggested by Bennett Todd
-- syslogd-internal messages (like restart) were missing the hostname
- this has been corrected
----------------------------------------------------------------------------
-Version 0.8.0
-
-Initial testing release. Based on the sysklogd package. Thanks to the
-sysklogd maintainers for all their good work!
----------------------------------------------------------------------------
-
-----------------------------------------------------------------------
-The following comments are from the stock syslogd.c source. They provide
-some insight into what happened to the source before we forked
-rsyslogd. However, much of the code already has been replaced and more
-is to be replaced. So over time, these comments become less valuable.
-I have moved them out of the syslogd.c file to shrink it, especially
-as a lot of them do no longer apply. For historical reasons and
-understanding of how the daemon evolved, they are probably still
-helpful.
-----------------------------------------------------------------------
-/*
- * syslogd -- log system messages
- *
- * This program implements a system log. It takes a series of lines.
- * Each line may have a priority, signified as "<n>" as
- * the first characters of the line. If this is
- * not present, a default priority is used.
- *
- * To kill syslogd, send a signal 15 (terminate). A signal 1 (hup) will
- * cause it to reread its configuration file.
- *
- * Defined Constants:
- *
- * MAXLINE -- the maximum line length that can be handled.
- * DEFUPRI -- the default priority for user messages
- * DEFSPRI -- the default priority for kernel messages
- *
- * Author: Eric Allman
- * extensive changes by Ralph Campbell
- * more extensive changes by Eric Allman (again)
- *
- * Steve Lord: Fix UNIX domain socket code, added linux kernel logging
- * change defines to
- * SYSLOG_INET - listen on a UDP socket
- * SYSLOG_UNIXAF - listen on unix domain socket
- * SYSLOG_KERNEL - listen to linux kernel
- *
- * Mon Feb 22 09:55:42 CST 1993: Dr. Wettstein
- * Additional modifications to the source. Changed priority scheme
- * to increase the level of configurability. In its stock configuration
- * syslogd no longer logs all messages of a certain priority and above
- * to a log file. The * wildcard is supported to specify all priorities.
- * Note that this is a departure from the BSD standard.
- *
- * Syslogd will now listen to both the inetd and the unixd socket. The
- * strategy is to allow all local programs to direct their output to
- * syslogd through the unixd socket while the program listens to the
- * inetd socket to get messages forwarded from other hosts.
- *
- * Fri Mar 12 16:55:33 CST 1993: Dr. Wettstein
- * Thanks to Stephen Tweedie (dcs.ed.ac.uk!sct) for helpful bug-fixes
- * and an enlightened commentary on the prioritization problem.
- *
- * Changed the priority scheme so that the default behavior mimics the
- * standard BSD. In this scenario all messages of a specified priority
- * and above are logged.
- *
- * Add the ability to specify a wildcard (=) as the first character
- * of the priority name. Doing this specifies that ONLY messages with
- * this level of priority are to be logged. For example:
- *
- * *.=debug /usr/adm/debug
- *
- * Would log only messages with a priority of debug to the /usr/adm/debug
- * file.
- *
- * Providing an * as the priority specifies that all messages are to be
- * logged. Note that this case is degenerate with specifying a priority
- * level of debug. The wildcard * was retained because I believe that
- * this is more intuitive.
- *
- * Thu Jun 24 11:34:13 CDT 1993: Dr. Wettstein
- * Modified sources to incorporate changes in libc4.4. Messages from
- * syslog are now null-terminated, syslogd code now parses messages
- * based on this termination scheme. Linux as of libc4.4 supports the
- * fsync system call. Modified code to fsync after all writes to
- * log files.
- *
- * Sat Dec 11 11:59:43 CST 1993: Dr. Wettstein
- * Extensive changes to the source code to allow compilation with no
- * complaints with -Wall.
- *
- * Reorganized the facility and priority name arrays so that they
- * compatible with the syslog.h source found in /usr/include/syslog.h.
- * NOTE that this should really be changed. The reason I do not
- * allow the use of the values defined in syslog.h is on account of
- * the extensions made to allow the wildcard character in the
- * priority field. To fix this properly one should malloc an array,
- * copy the contents of the array defined by syslog.h and then
- * make whatever modifications that are desired. Next round.
- *
- * Thu Jan 6 12:07:36 CST 1994: Dr. Wettstein
- * Added support for proper decomposition and re-assembly of
- * fragment messages on UNIX domain sockets. Lack of this capability
- * was causing 'partial' messages to be output. Since facility and
- * priority information is encoded as a leader on the messages this
- * was causing lines to be placed in erroneous files.
- *
- * Also added a patch from Shane Alderton (shane@ion.apana.org.au) to
- * correct a problem with syslogd dumping core when an attempt was made
- * to write log messages to a logged-on user. Thank you.
- *
- * Many thanks to Juha Virtanen (jiivee@hut.fi) for a series of
- * interchanges which lead to the fixing of problems with messages set
- * to priorities of none and emerg. Also thanks to Juha for a patch
- * to exclude users with a class of LOGIN from receiving messages.
- *
- * Shane Alderton provided an additional patch to fix zombies which
- * were conceived when messages were written to multiple users.
- *
- * Mon Feb 6 09:57:10 CST 1995: Dr. Wettstein
- * Patch to properly reset the single priority message flag. Thanks
- * to Christopher Gori for spotting this bug and forwarding a patch.
- *
- * Wed Feb 22 15:38:31 CST 1995: Dr. Wettstein
- * Added version information to startup messages.
- *
- * Added defines so that paths to important files are taken from
- * the definitions in paths.h. Hopefully this will insure that
- * everything follows the FSSTND standards. Thanks to Chris Metcalf
- * for a set of patches to provide this functionality. Also thanks
- * Elias Levy for prompting me to get these into the sources.
- *
- * Wed Jul 26 18:57:23 MET DST 1995: Martin Schulze
- * Linux' gethostname only returns the hostname and not the fqdn as
- * expected in the code. But if you call hostname with an fqdn then
- * gethostname will return an fqdn, so we have to mention that. This
- * has been changed.
- *
- * The 'LocalDomain' and the hostname of a remote machine is
- * converted to lower case, because the original caused some
- * inconsistency, because the (at least my) nameserver did respond an
- * fqdn containing of upper- _and_ lowercase letters while
- * 'LocalDomain' consisted only of lowercase letters and that didn't
- * match.
- *
- * Sat Aug 5 18:59:15 MET DST 1995: Martin Schulze
- * Now no messages that were received from any remote host are sent
- * out to another. At my domain this missing feature caused ugly
- * syslog-loops, sometimes.
- *
- * Remember that no message is sent out. I can't figure out any
- * scenario where it might be useful to change this behavior and to
- * send out messages to other hosts than the one from which we
- * received the message, but I might be shortsighted. :-/
- *
- * Thu Aug 10 19:01:08 MET DST 1995: Martin Schulze
- * Added my pidfile.[ch] to it to perform a better handling with
- * pidfiles. Now both, syslogd and klogd, can only be started
- * once. They check the pidfile.
- *
- * Sun Aug 13 19:01:41 MET DST 1995: Martin Schulze
- * Add an addition to syslog.conf's interpretation. If a priority
- * begins with an exclamation mark ('!') the normal interpretation
- * of the priority is inverted: ".!*" is the same as ".none", ".!=info"
- * don't logs the info priority, ".!crit" won't log any message with
- * the priority crit or higher. For example:
- *
- * mail.*;mail.!=info /usr/adm/mail
- *
- * Would log all messages of the facility mail except those with
- * the priority info to /usr/adm/mail. This makes the syslogd
- * much more flexible.
- *
- * Defined TABLE_ALLPRI=255 and changed some occurrences.
- *
- * Sat Aug 19 21:40:13 MET DST 1995: Martin Schulze
- * Making the table of facilities and priorities while in debug
- * mode more readable.
- *
- * If debugging is turned on, printing the whole table of
- * facilities and priorities every hexadecimal or 'X' entry is
- * now 2 characters wide.
- *
- * The number of the entry is prepended to each line of
- * facilities and priorities, and F_UNUSED lines are not shown
- * anymore.
- *
- * Corrected some #ifdef SYSV's.
- *
- * Mon Aug 21 22:10:35 MET DST 1995: Martin Schulze
- * Corrected a strange behavior during parsing of configuration
- * file. The original BSD syslogd doesn't understand spaces as
- * separators between specifier and action. This syslogd now
- * understands them. The old behavior caused some confusion over
- * the Linux community.
- *
- * Thu Oct 19 00:02:07 MET 1995: Martin Schulze
- * The default behavior has changed for security reasons. The
- * syslogd will not receive any remote message unless you turn
- * reception on with the "-r" option.
- *
- * Not defining SYSLOG_INET will result in not doing any network
- * activity, i.e. not sending or receiving messages. I changed
- * this because the old idea is implemented with the "-r" option
- * and the old thing didn't work anyway.
- *
- * Thu Oct 26 13:14:06 MET 1995: Martin Schulze
- * Added another logfile type F_FORW_UNKN. The problem I ran into
- * was a name server that runs on my machine and a forwarder of
- * kern.crit to another host. The hosts address can only be
- * fetched using the nameserver. But named is started after
- * syslogd, so syslogd complained.
- *
- * This logfile type will retry to get the address of the
- * hostname ten times and then complain. This should be enough to
- * get the named up and running during boot sequence.
- *
- * Fri Oct 27 14:08:15 1995: Dr. Wettstein
- * Changed static array of logfiles to a dynamic array. This
- * can grow during process.
- *
- * Fri Nov 10 23:08:18 1995: Martin Schulze
- * Inserted a new tabular sys_h_errlist that contains plain text
- * for error codes that are returned from the net subsystem and
- * stored in h_errno. I have also changed some wrong lookups to
- * sys_errlist.
- *
- * Wed Nov 22 22:32:55 1995: Martin Schulze
- * Added the fabulous strip-domain feature that allows us to
- * strip off (several) domain names from the fqdn and only log
- * the simple hostname. This is useful if you're in a LAN that
- * has a central log server and also different domains.
- *
- * I have also also added the -l switch do define hosts as
- * local. These will get logged with their simple hostname, too.
- *
- * Thu Nov 23 19:02:56 MET DST 1995: Martin Schulze
- * Added the possibility to omit fsyncing of logfiles after every
- * write. This will give some performance back if you have
- * programs that log in a very verbose manner (like innd or
- * smartlist). Thanks to Stephen R. van den Berg <srb@cuci.nl>
- * for the idea.
- *
- * Thu Jan 18 11:14:36 CST 1996: Dr. Wettstein
- * Added patche from beta-testers to stop compile error. Also
- * added removal of pid file as part of termination cleanup.
- *
- * Wed Feb 14 12:42:09 CST 1996: Dr. Wettstein
- * Allowed forwarding of messages received from remote hosts to
- * be controlled by a command-line switch. Specifying -h allows
- * forwarding. The default behavior is to disable forwarding of
- * messages which were received from a remote host.
- *
- * Parent process of syslogd does not exit until child process has
- * finished initialization process. This allows rc.* startup to
- * pause until syslogd facility is up and operating.
- *
- * Re-arranged the select code to move UNIX domain socket accepts
- * to be processed later. This was a contributed change which
- * has been proposed to correct the delays sometimes encountered
- * when syslogd starts up.
- *
- * Minor code cleanups.
- *
- * Thu May 2 15:15:33 CDT 1996: Dr. Wettstein
- * Fixed bug in init function which resulted in file descripters
- * being orphaned when syslogd process was re-initialized with SIGHUP
- * signal. Thanks to Edvard Tuinder
- * (Edvard.Tuinder@praseodymium.cistron.nl) for putting me on the
- * trail of this bug. I am amazed that we didn't catch this one
- * before now.
- *
- * Tue May 14 00:03:35 MET DST 1996: Martin Schulze
- * Corrected a mistake that causes the syslogd to stop logging at
- * some virtual consoles under Linux. This was caused by checking
- * the wrong error code. Thanks to Michael Nonweiler
- * <mrn20@hermes.cam.ac.uk> for sending me a patch.
- *
- * Mon May 20 13:29:32 MET DST 1996: Miquel van Smoorenburg <miquels@cistron.nl>
- * Added continuation line supported and fixed a bug in
- * the init() code.
- *
- * Tue May 28 00:58:45 MET DST 1996: Martin Schulze
- * Corrected behaviour of blocking pipes - i.e. the whole system
- * hung. Michael Nonweiler <mrn20@hermes.cam.ac.uk> has sent us
- * a patch to correct this. A new logfile type F_PIPE has been
- * introduced.
- *
- * Mon Feb 3 10:12:15 MET DST 1997: Martin Schulze
- * Corrected behaviour of logfiles if the file can't be opened.
- * There was a bug that causes syslogd to try to log into non
- * existing files which ate cpu power.
- *
- * Sun Feb 9 03:22:12 MET DST 1997: Martin Schulze
- * Modified syslogd.c to not kill itself which confuses bash 2.0.
- *
- * Mon Feb 10 00:09:11 MET DST 1997: Martin Schulze
- * Improved debug code to decode the numeric facility/priority
- * pair into textual information.
- *
- * Tue Jun 10 12:35:10 MET DST 1997: Martin Schulze
- * Corrected freeing of logfiles. Thanks to Jos Vos <jos@xos.nl>
- * for reporting the bug and sending an idea to fix the problem.
- *
- * Tue Jun 10 12:51:41 MET DST 1997: Martin Schulze
- * Removed sleep(10) from parent process. This has caused a slow
- * startup in former times - and I don't see any reason for this.
- *
- * Sun Jun 15 16:23:29 MET DST 1997: Michael Alan Dorman
- * Some more glibc patches made by <mdorman@debian.org>.
- *
- * Thu Jan 1 16:04:52 CET 1998: Martin Schulze <joey@infodrom.north.de
- * Applied patch from Herbert Thielen <Herbert.Thielen@lpr.e-technik.tu-muenchen.de>.
- * This included some balance parentheses for emacs and a bug in
- * the exclamation mark handling.
- *
- * Fixed small bug which caused syslogd to write messages to the
- * wrong logfile under some very rare conditions. Thanks to
- * Herbert Xu <herbert@gondor.apana.org.au> for fiddling this out.
- *
- * Thu Jan 8 22:46:35 CET 1998: Martin Schulze <joey@infodrom.north.de>
- * Reworked one line of the above patch as it prevented syslogd
- * from binding the socket with the result that no messages were
- * forwarded to other hosts.
- *
- * Sat Jan 10 01:33:06 CET 1998: Martin Schulze <joey@infodrom.north.de>
- * Fixed small bugs in F_FORW_UNKN meachanism. Thanks to Torsten
- * Neumann <torsten@londo.rhein-main.de> for pointing me to it.
- *
- * Mon Jan 12 19:50:58 CET 1998: Martin Schulze <joey@infodrom.north.de>
- * Modified debug output concerning remote receiption.
- *
- * Mon Feb 23 23:32:35 CET 1998: Topi Miettinen <Topi.Miettinen@ml.tele.fi>
- * Re-worked handling of Unix and UDP sockets to support closing /
- * opening of them in order to have it open only if it is needed
- * either for forwarding to a remote host or by receiption from
- * the network.
- *
- * Wed Feb 25 10:54:09 CET 1998: Martin Schulze <joey@infodrom.north.de>
- * Fixed little comparison mistake that prevented the MARK
- * feature to work properly.
- *
- * Wed Feb 25 13:21:44 CET 1998: Martin Schulze <joey@infodrom.north.de>
- * Corrected Topi's patch as it prevented forwarding during
- * startup due to an unknown LogPort.
- *
- * Sat Oct 10 20:01:48 CEST 1998: Martin Schulze <joey@infodrom.north.de>
- * Added support for TESTING define which will turn syslogd into
- * stdio-mode used for debugging.
- *
- * Sun Oct 11 20:16:59 CEST 1998: Martin Schulze <joey@infodrom.north.de>
- * Reworked the initialization/fork code. Now the parent
- * process activates a signal handler which the daughter process
- * will raise if it is initialized. Only after that one the
- * parent process may exit. Otherwise klogd might try to flush
- * its log cache while syslogd can't receive the messages yet.
- *
- * Mon Oct 12 13:30:35 CEST 1998: Martin Schulze <joey@infodrom.north.de>
- * Redirected some error output with regard to argument parsing to
- * stderr.
- *
- * Mon Oct 12 14:02:51 CEST 1998: Martin Schulze <joey@infodrom.north.de>
- * Applied patch provided vom Topi Miettinen with regard to the
- * people from OpenBSD. This provides the additional '-a'
- * argument used for specifying additional UNIX domain sockets to
- * listen to. This is been used with chroot()'ed named's for
- * example. See for http://www.psionic.com/papers/dns.html
- *
- * Mon Oct 12 18:29:44 CEST 1998: Martin Schulze <joey@infodrom.north.de>
- * Added `ftp' facility which was introduced in glibc version 2.
- * It's #ifdef'ed so won't harm with older libraries.
- *
- * Mon Oct 12 19:59:21 MET DST 1998: Martin Schulze <joey@infodrom.north.de>
- * Code cleanups with regard to bsd -> posix transition and
- * stronger security (buffer length checking). Thanks to Topi
- * Miettinen <tom@medialab.sonera.net>
- * . index() --> strchr()
- * . sprintf() --> snprintf()
- * . bcopy() --> memcpy()
- * . bzero() --> memset()
- * . UNAMESZ --> UT_NAMESIZE
- * . sys_errlist --> strerror()
- *
- * Mon Oct 12 20:22:59 CEST 1998: Martin Schulze <joey@infodrom.north.de>
- * Added support for setutent()/getutent()/endutend() instead of
- * binary reading the UTMP file. This is the the most portable
- * way. This allows /var/run/utmp format to change, even to a
- * real database or utmp daemon. Also if utmp file locking is
- * implemented in libc, syslog will use it immediately. Thanks
- * to Topi Miettinen <tom@medialab.sonera.net>.
- *
- * Mon Oct 12 20:49:18 MET DST 1998: Martin Schulze <joey@infodrom.north.de>
- * Avoid logging of SIGCHLD when syslogd is in the process of
- * exiting and closing its files. Again thanks to Topi.
- *
- * Mon Oct 12 22:18:34 CEST 1998: Martin Schulze <joey@infodrom.north.de>
- * Modified printline() to support 8bit characters - such as
- * russion letters. Thanks to Vladas Lapinskas <lapinskas@mail.iae.lt>.
- *
- * Sat Nov 14 02:29:37 CET 1998: Martin Schulze <joey@infodrom.north.de>
- * ``-m 0'' now turns of MARK logging entirely.
- *
- * Tue Jan 19 01:04:18 MET 1999: Martin Schulze <joey@infodrom.north.de>
- * Finally fixed an error with `-a' processing, thanks to Topi
- * Miettinen <tom@medialab.sonera.net>.
- *
- * Sun May 23 10:08:53 CEST 1999: Martin Schulze <joey@infodrom.north.de>
- * Removed superflous call to utmpname(). The path to the utmp
- * file is defined in the used libc and should not be hardcoded
- * into the syslogd binary referring the system it was compiled on.
- *
- * Sun Sep 17 20:45:33 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
- * Fixed some bugs in printline() code that did not escape
- * control characters '\177' through '\237' and contained a
- * single-byte buffer overflow. Thanks to Solar Designer
- * <solar@false.com>.
- *
- * Sun Sep 17 21:26:16 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
- * Don't close open sockets upon reload. Thanks to Bill
- * Nottingham.
- *
- * Mon Sep 18 09:10:47 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
- * Fixed bug in printchopped() that caused syslogd to emit
- * kern.emerg messages when splitting long lines. Thanks to
- * Daniel Jacobowitz <dan@debian.org> for the fix.
- *
- * Mon Sep 18 15:33:26 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
- * Removed unixm/unix domain sockets and switch to Datagram Unix
- * Sockets. This should remove one possibility to play DoS with
- * syslogd. Thanks to Olaf Kirch <okir@caldera.de> for the patch.
- *
- * Sun Mar 11 20:23:44 CET 2001: Martin Schulze <joey@infodrom.ffis.de>
- * Don't return a closed fd if `-a' is called with a wrong path.
- * Thanks to Bill Nottingham <notting@redhat.com> for providing
- * a patch.
- *
- * The following copyright and license applies to the original
- * sysklogd package that was used as a basis for this release of
- * rsyslogd. Obviously, it applies to those parts stemming directly
- * back to the original sysklogd package.
- *
- * Copyright (c) 1983, 1988 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
+This file has been superseeded by ChangeLog. Please see there.
diff --git a/README.linux b/README
index e8cc42f8..e8cc42f8 100644
--- a/README.linux
+++ b/README
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 00000000..b6d1f156
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,896 @@
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf. If you want to use that,
+you should regenerate the build system entirely.], [63])])
+
+# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.10], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.60])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_PROG_CC_C_O
+# --------------
+# Like AC_PROG_CC_C_O, but changed for automake.
+AC_DEFUN([AM_PROG_CC_C_O],
+[AC_REQUIRE([AC_PROG_CC_C_O])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+dnl Make sure AC_PROG_CC is never called again, or it will override our
+dnl setting of CC.
+m4_define([AC_PROG_CC],
+ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
diff --git a/compile b/compile
new file mode 100755
index 00000000..1b1d2321
--- /dev/null
+++ b/compile
@@ -0,0 +1,142 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2005-05-14.22
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+esac
+
+ofile=
+cfile=
+eat=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as `compile cc -o foo foo.c'.
+ # So we strip `-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no `-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # `.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/config.h b/config.h
new file mode 100644
index 00000000..04ac5fec
--- /dev/null
+++ b/config.h
@@ -0,0 +1,275 @@
+/* config.h. Generated from config.h.in by configure. */
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* klogd functionality is integrated. */
+#define FEATURE_KLOGD 1
+
+/* Regular expressions support enabled. */
+#define FEATURE_REGEXP 1
+
+/* Define to 1 if you have the `alarm' function. */
+#define HAVE_ALARM 1
+
+/* Define to 1 if you have the <arpa/inet.h> header file. */
+#define HAVE_ARPA_INET_H 1
+
+/* Define to 1 if you have the <arpa/nameser.h> header file. */
+#define HAVE_ARPA_NAMESER_H 1
+
+/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */
+/* #undef HAVE_DOPRNT */
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#define HAVE_FCNTL_H 1
+
+/* Define to 1 if you have the `fork' function. */
+#define HAVE_FORK 1
+
+/* Define to 1 if you have the `gethostbyname' function. */
+#define HAVE_GETHOSTBYNAME 1
+
+/* Define to 1 if you have the `gethostname' function. */
+#define HAVE_GETHOSTNAME 1
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#define HAVE_GETTIMEOFDAY 1
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if you have the <locale.h> header file. */
+#define HAVE_LOCALE_H 1
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+ to 0 otherwise. */
+#define HAVE_MALLOC 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the `memset' function. */
+#define HAVE_MEMSET 1
+
+/* Define to 1 if you have the <netdb.h> header file. */
+#define HAVE_NETDB_H 1
+
+/* Define to 1 if you have the <netinet/in.h> header file. */
+#define HAVE_NETINET_IN_H 1
+
+/* Define to 1 if you have the <paths.h> header file. */
+#define HAVE_PATHS_H 1
+
+/* Define to 1 if your system has a GNU libc compatible `realloc' function,
+ and to 0 otherwise. */
+#define HAVE_REALLOC 1
+
+/* Define to 1 if you have the `regcomp' function. */
+#define HAVE_REGCOMP 1
+
+/* Define to 1 if you have the <resolv.h> header file. */
+#define HAVE_RESOLV_H 1
+
+/* Define to 1 if you have the `select' function. */
+#define HAVE_SELECT 1
+
+/* Define to 1 if you have the `socket' function. */
+#define HAVE_SOCKET 1
+
+/* Define to 1 if `stat' has the bug that it succeeds when given the
+ zero-length file name argument. */
+/* #undef HAVE_STAT_EMPTY_STRING_BUG */
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdio_ext.h> header file. */
+#define HAVE_STDIO_EXT_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the `strcasecmp' function. */
+#define HAVE_STRCASECMP 1
+
+/* Define to 1 if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define to 1 if you have the `strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the `strndup' function. */
+#define HAVE_STRNDUP 1
+
+/* Define to 1 if you have the `strrchr' function. */
+#define HAVE_STRRCHR 1
+
+/* Define to 1 if you have the `strstr' function. */
+#define HAVE_STRSTR 1
+
+/* Define to 1 if you have the `strtol' function. */
+#define HAVE_STRTOL 1
+
+/* Define to 1 if you have the `strtoul' function. */
+#define HAVE_STRTOUL 1
+
+/* Define to 1 if you have the <syslog.h> header file. */
+#define HAVE_SYSLOG_H 1
+
+/* Define to 1 if you have the <sys/file.h> header file. */
+#define HAVE_SYS_FILE_H 1
+
+/* Define to 1 if you have the <sys/ioctl.h> header file. */
+#define HAVE_SYS_IOCTL_H 1
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#define HAVE_SYS_PARAM_H 1
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#define HAVE_SYS_SELECT_H 1
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+#define HAVE_SYS_SOCKET_H 1
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#define HAVE_SYS_TIME_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */
+#define HAVE_SYS_WAIT_H 1
+
+/* Define to 1 if you have the `uname' function. */
+#define HAVE_UNAME 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if you have the <utmp.h> header file. */
+#define HAVE_UTMP_H 1
+
+/* Define to 1 if you have the `vfork' function. */
+#define HAVE_VFORK 1
+
+/* Define to 1 if you have the <vfork.h> header file. */
+/* #undef HAVE_VFORK_H */
+
+/* Define to 1 if you have the `vprintf' function. */
+#define HAVE_VPRINTF 1
+
+/* Define to 1 if you have the `wait3' system call. Deprecated, you should no
+ longer depend upon `wait3'. */
+#define HAVE_WAIT3 1
+
+/* Define to 1 if `fork' works. */
+#define HAVE_WORKING_FORK 1
+
+/* Define to 1 if `vfork' works. */
+#define HAVE_WORKING_VFORK 1
+
+/* Define to 1 if `lstat' dereferences a symlink specified with a trailing
+ slash. */
+#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
+
+/* Defined if debug mode is disabled. */
+#define NDEBUG 1
+
+/* Defined when large file support is disabled. */
+/* #undef NOLARGEFILE */
+
+/* Define to 1 if your C compiler doesn't accept -c and -o together. */
+/* #undef NO_MINUS_C_MINUS_O */
+
+/* Name of package */
+#define PACKAGE "rsyslog"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "rsyslog@lists.adiscon.com."
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "rsyslog"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "rsyslog 1.16.0"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "rsyslog"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "1.16.0"
+
+/* Define as the return type of signal handlers (`int' or `void'). */
+#define RETSIGTYPE void
+
+/* Define to the type of arg 1 for `select'. */
+#define SELECT_TYPE_ARG1 int
+
+/* Define to the type of args 2, 3 and 4 for `select'. */
+#define SELECT_TYPE_ARG234 (fd_set *)
+
+/* Define to the type of arg 5 for `select'. */
+#define SELECT_TYPE_ARG5 (struct timeval *)
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Why there is this macro */
+#define SYSLOG_INET 1
+
+/* I'd like to get rid of this. */
+#define SYSV 1
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#define TIME_WITH_SYS_TIME 1
+
+/* Define to 1 if your <sys/time.h> declares `struct tm'. */
+/* #undef TM_IN_SYS_TIME */
+
+/* Define if you want to enable zlib support */
+#define USE_NETZIP 1
+
+/* Multithreading support enabled. */
+#define USE_PTHREADS 1
+
+/* Version number of package */
+#define VERSION "1.16.0"
+
+/* MySql database support enabled */
+/* #undef WITH_DB */
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to rpl_malloc if the replacement function should be used. */
+/* #undef malloc */
+
+/* Define to `long int' if <sys/types.h> does not define. */
+/* #undef off_t */
+
+/* Define to `int' if <sys/types.h> does not define. */
+/* #undef pid_t */
+
+/* Define to rpl_realloc if the replacement function should be used. */
+/* #undef realloc */
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+/* #undef size_t */
+
+/* Define to `int' if <sys/types.h> does not define. */
+/* #undef ssize_t */
+
+/* Define as `fork' if `vfork' does not work. */
+/* #undef vfork */
+
+/* Define to empty if the keyword `volatile' does not work. Warning: valid
+ code using `volatile' can become incorrect without. Disable with care. */
+/* #undef volatile */
diff --git a/configure b/configure
new file mode 100755
index 00000000..f8e4c08e
--- /dev/null
+++ b/configure
@@ -0,0 +1,8572 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.61 for rsyslog 1.16.0.
+#
+# Report bugs to <rsyslog@lists.adiscon.com.>.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+if test "x$CONFIG_SHELL" = x; then
+ if (eval ":") 2>/dev/null; then
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+
+ if test $as_have_required = yes && (eval ":
+(as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=\$LINENO
+ as_lineno_2=\$LINENO
+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+ :
+else
+ as_candidate_shells=
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ case $as_dir in
+ /*)
+ for as_base in sh bash ksh sh5; do
+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ done;;
+ esac
+done
+IFS=$as_save_IFS
+
+
+ for as_shell in $as_candidate_shells $SHELL; do
+ # Try only shells that exist, to save several forks.
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+ CONFIG_SHELL=$as_shell
+ as_have_required=yes
+ if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+ (exit $1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+ break
+fi
+
+fi
+
+ done
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+ if test $as_have_required = no; then
+ echo This script requires a shell more modern than all the
+ echo shells that I found on your system. Please install a
+ echo modern shell, or manually run the script under such a
+ echo shell if you do have one.
+ { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+ echo Please tell autoconf@gnu.org about your system,
+ echo including any error possibly output before this
+ echo message
+}
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Identity of this package.
+PACKAGE_NAME='rsyslog'
+PACKAGE_TARNAME='rsyslog'
+PACKAGE_VERSION='1.16.0'
+PACKAGE_STRING='rsyslog 1.16.0'
+PACKAGE_BUGREPORT='rsyslog@lists.adiscon.com.'
+
+ac_unique_file="syslogd.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+am__isrc
+CYGPATH_W
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+install_sh
+STRIP
+INSTALL_STRIP_PROGRAM
+mkdir_p
+AWK
+SET_MAKE
+am__leading_dot
+AMTAR
+am__tar
+am__untar
+CC
+CFLAGS
+LDFLAGS
+CPPFLAGS
+ac_ct_CC
+EXEEXT
+OBJEXT
+DEPDIR
+am__include
+am__quote
+AMDEP_TRUE
+AMDEP_FALSE
+AMDEPBACKSLASH
+CCDEPMODE
+am__fastdepCC_TRUE
+am__fastdepCC_FALSE
+CPP
+GREP
+EGREP
+LIBOBJS
+MYSQL_CONFIG
+enable_mysql_TRUE
+enable_mysql_FALSE
+mysql_includes
+mysql_libs
+zlib_libs
+pthreads_libs
+LTLIBOBJS'
+ac_subst_files=''
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute directory names.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ { echo "$as_me: error: Working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ { echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$0" ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+ { (exit 1); exit 1; }; }
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures rsyslog 1.16.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/rsyslog]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of rsyslog 1.16.0:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-largefile Enable large file support [default=yes]
+ --enable-mysql Enable MySql database support [default=no]
+ --enable-regexp Enable regular expressions support [default=yes]
+ --enable-zlib Enable zlib compression support [default=yes]
+ --enable-pthreads Enable multithreading via pthreads [default=yes]
+ --enable-klogd Integrated klogd functionality [default=yes]
+ --enable-debug Enable debug mode [default=no]
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <rsyslog@lists.adiscon.com.>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" || continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+rsyslog configure 1.16.0
+generated by GNU Autoconf 2.61
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by rsyslog $as_me 1.16.0, which was
+generated by GNU Autoconf 2.61. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args '$ac_arg'"
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -n "$CONFIG_SITE"; then
+ set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+ set x "$ac_default_prefix/share/config.site" \
+ "$ac_default_prefix/etc/config.site"
+fi
+shift
+for ac_site_file
+do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+am__api_version='1.10'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+IFS=$as_save_IFS
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm -f conftest.sed
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+done
+IFS=$as_save_IFS
+
+fi
+
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+echo "${ECHO_T}$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+ SET_MAKE=
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE=rsyslog
+ VERSION=1.16.0
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+# Checks for programs.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO: checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort. b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions. Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+
+{ echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6; }
+if test -z "$ac_file"; then
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6; }
+
+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_compiler_gnu=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ CFLAGS=""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c89=$ac_arg
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+ xno)
+ { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+
+
+{ echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC" am_compiler_list=
+
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+if test "x$CC" != xcc; then
+ { echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
+echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6; }
+else
+ { echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
+echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6; }
+fi
+set dummy $CC; ac_cc=`echo $2 |
+ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+rm -f conftest2.*
+if { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ test -f conftest2.$ac_objext && { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); };
+then
+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+ if test "x$CC" != xcc; then
+ # Test first that cc exists at all.
+ if { ac_try='cc -c conftest.$ac_ext >&5'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+ rm -f conftest2.*
+ if { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ test -f conftest2.$ac_objext && { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); };
+ then
+ # cc works too.
+ :
+ else
+ # cc exists but doesn't like -o.
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ fi
+ fi
+ fi
+else
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f core conftest*
+
+fi
+if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+
+cat >>confdefs.h <<\_ACEOF
+#define NO_MINUS_C_MINUS_O 1
+_ACEOF
+
+fi
+
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+
+
+
+# Checks for libraries.
+
+# Checks for header files.
+
+
+
+
+
+
+for ac_header in sys/types.h netinet/in.h arpa/nameser.h netdb.h resolv.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+# include <netinet/in.h> /* inet_ functions / structs */
+#endif
+#ifdef HAVE_ARPA_NAMESER_H
+# include <arpa/nameser.h> /* DNS HEADER struct */
+#endif
+#ifdef HAVE_NETDB_H
+# include <netdb.h>
+#endif
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_Header=no"
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Extract the first word of "grep ggrep" to use in msg output
+if test -z "$GREP"; then
+set dummy grep ggrep; ac_prog_name=$2
+if test "${ac_cv_path_GREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_path_GREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+ # Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_GREP_found && break 3
+ done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+GREP="$ac_cv_path_GREP"
+if test -z "$GREP"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ # Extract the first word of "egrep" to use in msg output
+if test -z "$EGREP"; then
+set dummy egrep; ac_prog_name=$2
+if test "${ac_cv_path_EGREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_path_EGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+ # Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_EGREP_found && break 3
+ done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+EGREP="$ac_cv_path_EGREP"
+if test -z "$EGREP"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_header_stdc=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6; }
+if test "${ac_cv_header_sys_wait_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/wait.h>
+#ifndef WEXITSTATUS
+# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8)
+#endif
+#ifndef WIFEXITED
+# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
+#endif
+
+int
+main ()
+{
+ int s;
+ wait (&s);
+ s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_header_sys_wait_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_header_sys_wait_h=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5
+echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6; }
+if test $ac_cv_header_sys_wait_h = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_SYS_WAIT_H 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_Header=no"
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+for ac_header in arpa/inet.h fcntl.h locale.h netdb.h netinet/in.h paths.h stdio_ext.h stdlib.h string.h sys/file.h sys/ioctl.h sys/param.h sys/socket.h sys/time.h syslog.h unistd.h utmp.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to rsyslog@lists.adiscon.com. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; }
+if test "${ac_cv_c_const+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this. */
+ typedef int charset[2];
+ const charset cs;
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *pcpcc;
+ char **ppc;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ pcpcc = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++pcpcc;
+ ppc = (char**) pcpcc;
+ pcpcc = (char const *const *) ppc;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ if (s) return 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ if (!foo) return 0;
+ }
+ return !cs[0] && !zero.x;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_c_const=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_c_const=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking for off_t" >&5
+echo $ECHO_N "checking for off_t... $ECHO_C" >&6; }
+if test "${ac_cv_type_off_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+typedef off_t ac__type_new_;
+int
+main ()
+{
+if ((ac__type_new_ *) 0)
+ return 0;
+if (sizeof (ac__type_new_))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_type_off_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_type_off_t=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5
+echo "${ECHO_T}$ac_cv_type_off_t" >&6; }
+if test $ac_cv_type_off_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define off_t long int
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking for pid_t" >&5
+echo $ECHO_N "checking for pid_t... $ECHO_C" >&6; }
+if test "${ac_cv_type_pid_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+typedef pid_t ac__type_new_;
+int
+main ()
+{
+if ((ac__type_new_ *) 0)
+ return 0;
+if (sizeof (ac__type_new_))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_type_pid_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_type_pid_t=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
+echo "${ECHO_T}$ac_cv_type_pid_t" >&6; }
+if test $ac_cv_type_pid_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking for size_t" >&5
+echo $ECHO_N "checking for size_t... $ECHO_C" >&6; }
+if test "${ac_cv_type_size_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+typedef size_t ac__type_new_;
+int
+main ()
+{
+if ((ac__type_new_ *) 0)
+ return 0;
+if (sizeof (ac__type_new_))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_type_size_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_type_size_t=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
+echo "${ECHO_T}$ac_cv_type_size_t" >&6; }
+if test $ac_cv_type_size_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking for ssize_t" >&5
+echo $ECHO_N "checking for ssize_t... $ECHO_C" >&6; }
+if test "${ac_cv_type_ssize_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+typedef ssize_t ac__type_new_;
+int
+main ()
+{
+if ((ac__type_new_ *) 0)
+ return 0;
+if (sizeof (ac__type_new_))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_type_ssize_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_type_ssize_t=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_type_ssize_t" >&5
+echo "${ECHO_T}$ac_cv_type_ssize_t" >&6; }
+if test $ac_cv_type_ssize_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define ssize_t int
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
+echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; }
+if test "${ac_cv_header_time+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_header_time=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_header_time=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
+echo "${ECHO_T}$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TIME_WITH_SYS_TIME 1
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5
+echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6; }
+if test "${ac_cv_struct_tm+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <time.h>
+
+int
+main ()
+{
+struct tm tm;
+ int *p = &tm.tm_sec;
+ return !p;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_struct_tm=time.h
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_struct_tm=sys/time.h
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5
+echo "${ECHO_T}$ac_cv_struct_tm" >&6; }
+if test $ac_cv_struct_tm = sys/time.h; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TM_IN_SYS_TIME 1
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking for working volatile" >&5
+echo $ECHO_N "checking for working volatile... $ECHO_C" >&6; }
+if test "${ac_cv_c_volatile+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+volatile int x;
+int * volatile y = (int *) 0;
+return !x && !y;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_c_volatile=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_c_volatile=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_c_volatile" >&5
+echo "${ECHO_T}$ac_cv_c_volatile" >&6; }
+if test $ac_cv_c_volatile = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define volatile
+_ACEOF
+
+fi
+
+
+# Checks for library functions.
+
+for ac_header in vfork.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to rsyslog@lists.adiscon.com. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+for ac_func in fork vfork
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+{ echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
+if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$ac_func || defined __stub___$ac_func
+choke me
+#endif
+
+int
+main ()
+{
+return $ac_func ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_var=no"
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+ac_res=`eval echo '${'$as_ac_var'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+if test "x$ac_cv_func_fork" = xyes; then
+ { echo "$as_me:$LINENO: checking for working fork" >&5
+echo $ECHO_N "checking for working fork... $ECHO_C" >&6; }
+if test "${ac_cv_func_fork_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_fork_works=cross
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ /* By Ruediger Kuhlmann. */
+ return fork () < 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_fork_works=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_fork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5
+echo "${ECHO_T}$ac_cv_func_fork_works" >&6; }
+
+else
+ ac_cv_func_fork_works=$ac_cv_func_fork
+fi
+if test "x$ac_cv_func_fork_works" = xcross; then
+ case $host in
+ *-*-amigaos* | *-*-msdosdjgpp*)
+ # Override, as these systems have only a dummy fork() stub
+ ac_cv_func_fork_works=no
+ ;;
+ *)
+ ac_cv_func_fork_works=yes
+ ;;
+ esac
+ { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5
+echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;}
+fi
+ac_cv_func_vfork_works=$ac_cv_func_vfork
+if test "x$ac_cv_func_vfork" = xyes; then
+ { echo "$as_me:$LINENO: checking for working vfork" >&5
+echo $ECHO_N "checking for working vfork... $ECHO_C" >&6; }
+if test "${ac_cv_func_vfork_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_vfork_works=cross
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Thanks to Paul Eggert for this test. */
+$ac_includes_default
+#include <sys/wait.h>
+#ifdef HAVE_VFORK_H
+# include <vfork.h>
+#endif
+/* On some sparc systems, changes by the child to local and incoming
+ argument registers are propagated back to the parent. The compiler
+ is told about this with #include <vfork.h>, but some compilers
+ (e.g. gcc -O) don't grok <vfork.h>. Test for this by using a
+ static variable whose address is put into a register that is
+ clobbered by the vfork. */
+static void
+#ifdef __cplusplus
+sparc_address_test (int arg)
+# else
+sparc_address_test (arg) int arg;
+#endif
+{
+ static pid_t child;
+ if (!child) {
+ child = vfork ();
+ if (child < 0) {
+ perror ("vfork");
+ _exit(2);
+ }
+ if (!child) {
+ arg = getpid();
+ write(-1, "", 0);
+ _exit (arg);
+ }
+ }
+}
+
+int
+main ()
+{
+ pid_t parent = getpid ();
+ pid_t child;
+
+ sparc_address_test (0);
+
+ child = vfork ();
+
+ if (child == 0) {
+ /* Here is another test for sparc vfork register problems. This
+ test uses lots of local variables, at least as many local
+ variables as main has allocated so far including compiler
+ temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris
+ 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should
+ reuse the register of parent for one of the local variables,
+ since it will think that parent can't possibly be used any more
+ in this routine. Assigning to the local variable will thus
+ munge parent in the parent process. */
+ pid_t
+ p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(),
+ p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid();
+ /* Convince the compiler that p..p7 are live; otherwise, it might
+ use the same hardware register for all 8 local variables. */
+ if (p != p1 || p != p2 || p != p3 || p != p4
+ || p != p5 || p != p6 || p != p7)
+ _exit(1);
+
+ /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent
+ from child file descriptors. If the child closes a descriptor
+ before it execs or exits, this munges the parent's descriptor
+ as well. Test for this by closing stdout in the child. */
+ _exit(close(fileno(stdout)) != 0);
+ } else {
+ int status;
+ struct stat st;
+
+ while (wait(&status) != child)
+ ;
+ return (
+ /* Was there some problem with vforking? */
+ child < 0
+
+ /* Did the child fail? (This shouldn't happen.) */
+ || status
+
+ /* Did the vfork/compiler bug occur? */
+ || parent != getpid()
+
+ /* Did the file descriptor bug occur? */
+ || fstat(fileno(stdout), &st) != 0
+ );
+ }
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_vfork_works=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_vfork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5
+echo "${ECHO_T}$ac_cv_func_vfork_works" >&6; }
+
+fi;
+if test "x$ac_cv_func_fork_works" = xcross; then
+ ac_cv_func_vfork_works=$ac_cv_func_vfork
+ { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5
+echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;}
+fi
+
+if test "x$ac_cv_func_vfork_works" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_WORKING_VFORK 1
+_ACEOF
+
+else
+
+cat >>confdefs.h <<\_ACEOF
+#define vfork fork
+_ACEOF
+
+fi
+if test "x$ac_cv_func_fork_works" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_WORKING_FORK 1
+_ACEOF
+
+fi
+
+if test $ac_cv_c_compiler_gnu = yes; then
+ { echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5
+echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6; }
+if test "${ac_cv_prog_gcc_traditional+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_pattern="Autoconf.*'x'"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sgtty.h>
+Autoconf TIOCGETP
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "$ac_pattern" >/dev/null 2>&1; then
+ ac_cv_prog_gcc_traditional=yes
+else
+ ac_cv_prog_gcc_traditional=no
+fi
+rm -f conftest*
+
+
+ if test $ac_cv_prog_gcc_traditional = no; then
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <termio.h>
+Autoconf TCGETA
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "$ac_pattern" >/dev/null 2>&1; then
+ ac_cv_prog_gcc_traditional=yes
+fi
+rm -f conftest*
+
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5
+echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6; }
+ if test $ac_cv_prog_gcc_traditional = yes; then
+ CC="$CC -traditional"
+ fi
+fi
+
+
+for ac_header in stdlib.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to rsyslog@lists.adiscon.com. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+{ echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5
+echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6; }
+if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_malloc_0_nonnull=no
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#if defined STDC_HEADERS || defined HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *malloc ();
+#endif
+
+int
+main ()
+{
+return ! malloc (0);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_malloc_0_nonnull=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_malloc_0_nonnull=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5
+echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6; }
+if test $ac_cv_func_malloc_0_nonnull = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_MALLOC 1
+_ACEOF
+
+else
+ cat >>confdefs.h <<\_ACEOF
+#define HAVE_MALLOC 0
+_ACEOF
+
+ case " $LIBOBJS " in
+ *" malloc.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS malloc.$ac_objext"
+ ;;
+esac
+
+
+cat >>confdefs.h <<\_ACEOF
+#define malloc rpl_malloc
+_ACEOF
+
+fi
+
+
+
+
+for ac_header in stdlib.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to rsyslog@lists.adiscon.com. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+{ echo "$as_me:$LINENO: checking for GNU libc compatible realloc" >&5
+echo $ECHO_N "checking for GNU libc compatible realloc... $ECHO_C" >&6; }
+if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_realloc_0_nonnull=no
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#if defined STDC_HEADERS || defined HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *realloc ();
+#endif
+
+int
+main ()
+{
+return ! realloc (0, 0);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_realloc_0_nonnull=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_realloc_0_nonnull=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_realloc_0_nonnull" >&5
+echo "${ECHO_T}$ac_cv_func_realloc_0_nonnull" >&6; }
+if test $ac_cv_func_realloc_0_nonnull = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_REALLOC 1
+_ACEOF
+
+else
+ cat >>confdefs.h <<\_ACEOF
+#define HAVE_REALLOC 0
+_ACEOF
+
+ case " $LIBOBJS " in
+ *" realloc.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS realloc.$ac_objext"
+ ;;
+esac
+
+
+cat >>confdefs.h <<\_ACEOF
+#define realloc rpl_realloc
+_ACEOF
+
+fi
+
+
+
+
+
+for ac_header in sys/select.h sys/socket.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to rsyslog@lists.adiscon.com. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+{ echo "$as_me:$LINENO: checking types of arguments for select" >&5
+echo $ECHO_N "checking types of arguments for select... $ECHO_C" >&6; }
+if test "${ac_cv_func_select_args+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ for ac_arg234 in 'fd_set *' 'int *' 'void *'; do
+ for ac_arg1 in 'int' 'size_t' 'unsigned long int' 'unsigned int'; do
+ for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#ifdef HAVE_SYS_SELECT_H
+# include <sys/select.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+# include <sys/socket.h>
+#endif
+
+int
+main ()
+{
+extern int select ($ac_arg1,
+ $ac_arg234, $ac_arg234, $ac_arg234,
+ $ac_arg5);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_func_select_args="$ac_arg1,$ac_arg234,$ac_arg5"; break 3
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ done
+done
+# Provide a safe default value.
+: ${ac_cv_func_select_args='int,int *,struct timeval *'}
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_select_args" >&5
+echo "${ECHO_T}$ac_cv_func_select_args" >&6; }
+ac_save_IFS=$IFS; IFS=','
+set dummy `echo "$ac_cv_func_select_args" | sed 's/\*/\*/g'`
+IFS=$ac_save_IFS
+shift
+
+cat >>confdefs.h <<_ACEOF
+#define SELECT_TYPE_ARG1 $1
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define SELECT_TYPE_ARG234 ($2)
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define SELECT_TYPE_ARG5 ($3)
+_ACEOF
+
+rm -f conftest*
+
+{ echo "$as_me:$LINENO: checking return type of signal handlers" >&5
+echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6; }
+if test "${ac_cv_type_signal+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <signal.h>
+
+int
+main ()
+{
+return *(signal (0, 0)) (0) == 1;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_type_signal=int
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_type_signal=void
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
+echo "${ECHO_T}$ac_cv_type_signal" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define RETSIGTYPE $ac_cv_type_signal
+_ACEOF
+
+
+{ echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5
+echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6; }
+if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ rm -f conftest.sym conftest.file
+echo >conftest.file
+if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_lstat_dereferences_slashed_symlink=no
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+struct stat sbuf;
+ /* Linux will dereference the symlink and fail.
+ That is better in the sense that it means we will not
+ have to compile and use the lstat wrapper. */
+ return lstat ("conftest.sym/", &sbuf) == 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_lstat_dereferences_slashed_symlink=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_lstat_dereferences_slashed_symlink=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+else
+ # If the `ln -s' command failed, then we probably don't even
+ # have an lstat function.
+ ac_cv_func_lstat_dereferences_slashed_symlink=no
+fi
+rm -f conftest.sym conftest.file
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5
+echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; }
+
+test $ac_cv_func_lstat_dereferences_slashed_symlink = yes &&
+
+cat >>confdefs.h <<_ACEOF
+#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
+_ACEOF
+
+
+if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then
+ case " $LIBOBJS " in
+ *" lstat.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS lstat.$ac_objext"
+ ;;
+esac
+
+fi
+
+{ echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5
+echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6; }
+if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_stat_empty_string_bug=yes
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+struct stat sbuf;
+ return stat ("", &sbuf) == 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_stat_empty_string_bug=no
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_stat_empty_string_bug=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5
+echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6; }
+if test $ac_cv_func_stat_empty_string_bug = yes; then
+ case " $LIBOBJS " in
+ *" stat.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS stat.$ac_objext"
+ ;;
+esac
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STAT_EMPTY_STRING_BUG 1
+_ACEOF
+
+fi
+
+
+for ac_func in vprintf
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+{ echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
+if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$ac_func || defined __stub___$ac_func
+choke me
+#endif
+
+int
+main ()
+{
+return $ac_func ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_var=no"
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+ac_res=`eval echo '${'$as_ac_var'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+{ echo "$as_me:$LINENO: checking for _doprnt" >&5
+echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6; }
+if test "${ac_cv_func__doprnt+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define _doprnt innocuous__doprnt
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char _doprnt (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef _doprnt
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char _doprnt ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub__doprnt || defined __stub____doprnt
+choke me
+#endif
+
+int
+main ()
+{
+return _doprnt ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ ac_cv_func__doprnt=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_func__doprnt=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5
+echo "${ECHO_T}$ac_cv_func__doprnt" >&6; }
+if test $ac_cv_func__doprnt = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_DOPRNT 1
+_ACEOF
+
+fi
+
+fi
+done
+
+
+{ echo "$as_me:$LINENO: checking for wait3 that fills in rusage" >&5
+echo $ECHO_N "checking for wait3 that fills in rusage... $ECHO_C" >&6; }
+if test "${ac_cv_func_wait3_rusage+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_wait3_rusage=no
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/wait.h>
+/* HP-UX has wait3 but does not fill in rusage at all. */
+int
+main ()
+{
+ struct rusage r;
+ int i;
+ /* Use a field that we can force nonzero --
+ voluntary context switches.
+ For systems like NeXT and OSF/1 that don't set it,
+ also use the system CPU time. And page faults (I/O) for Linux. */
+ r.ru_nvcsw = 0;
+ r.ru_stime.tv_sec = 0;
+ r.ru_stime.tv_usec = 0;
+ r.ru_majflt = r.ru_minflt = 0;
+ switch (fork ())
+ {
+ case 0: /* Child. */
+ sleep(1); /* Give up the CPU. */
+ _exit(0);
+ break;
+ case -1: /* What can we do? */
+ _exit(0);
+ break;
+ default: /* Parent. */
+ wait3(&i, 0, &r);
+ /* Avoid "text file busy" from rm on fast HP-UX machines. */
+ sleep(2);
+ return (r.ru_nvcsw == 0 && r.ru_majflt == 0 && r.ru_minflt == 0
+ && r.ru_stime.tv_sec == 0 && r.ru_stime.tv_usec == 0);
+ }
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_wait3_rusage=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_wait3_rusage=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_wait3_rusage" >&5
+echo "${ECHO_T}$ac_cv_func_wait3_rusage" >&6; }
+if test $ac_cv_func_wait3_rusage = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_WAIT3 1
+_ACEOF
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+for ac_func in alarm gethostbyname gethostname gettimeofday memset regcomp select socket strcasecmp strchr strerror strndup strrchr strstr strtol strtoul uname
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+{ echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
+if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$ac_func || defined __stub___$ac_func
+choke me
+#endif
+
+int
+main ()
+{
+return $ac_func ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_var=no"
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+ac_res=`eval echo '${'$as_ac_var'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+# Ugly stuff
+
+cat >>confdefs.h <<\_ACEOF
+#define SYSV 1
+_ACEOF
+
+
+cat >>confdefs.h <<\_ACEOF
+#define SYSLOG_INET 1
+_ACEOF
+
+
+
+# Large file support
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then
+ enableval=$enable_largefile; case "${enableval}" in
+ yes) enable_largefile="yes" ;;
+ no) enable_largefile="no" ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-largefile" >&5
+echo "$as_me: error: bad value ${enableval} for --enable-largefile" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ enable_largefile="yes"
+
+fi
+
+if test "$enable_largefile" = "no"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define NOLARGEFILE 1
+_ACEOF
+
+fi
+
+# SQL support
+# Check whether --enable-mysql was given.
+if test "${enable_mysql+set}" = set; then
+ enableval=$enable_mysql; case "${enableval}" in
+ yes) enable_mysql="yes" ;;
+ no) enable_mysql="no" ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-mysql" >&5
+echo "$as_me: error: bad value ${enableval} for --enable-mysql" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ enable_mysql=no
+
+fi
+
+if test "$enable_mysql" = "yes"; then
+ # Extract the first word of "mysql_config", so it can be a program name with args.
+set dummy mysql_config; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_MYSQL_CONFIG+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$MYSQL_CONFIG"; then
+ ac_cv_prog_MYSQL_CONFIG="$MYSQL_CONFIG" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_MYSQL_CONFIG="yes"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+MYSQL_CONFIG=$ac_cv_prog_MYSQL_CONFIG
+if test -n "$MYSQL_CONFIG"; then
+ { echo "$as_me:$LINENO: result: $MYSQL_CONFIG" >&5
+echo "${ECHO_T}$MYSQL_CONFIG" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ if test x$MYSQL_CONFIG = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define WITH_DB 1
+_ACEOF
+
+ mysql_includes=`mysql_config --cflags`
+ mysql_libs=`mysql_config --libs`
+ else
+ enable_mysql=no
+ fi
+fi
+ if test x$enable_mysql = xyes; then
+ enable_mysql_TRUE=
+ enable_mysql_FALSE='#'
+else
+ enable_mysql_TRUE='#'
+ enable_mysql_FALSE=
+fi
+
+
+
+
+# Regular expressions
+# Check whether --enable-regexp was given.
+if test "${enable_regexp+set}" = set; then
+ enableval=$enable_regexp; case "${enableval}" in
+ yes) enable_regexp="yes" ;;
+ no) enable_regexp="no" ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-regexp" >&5
+echo "$as_me: error: bad value ${enableval} for --enable-regexp" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ enable_regexp=yes
+
+fi
+
+if test "$enable_regexp" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define FEATURE_REGEXP 1
+_ACEOF
+
+fi
+
+# zlib compression
+# Check whether --enable-zlib was given.
+if test "${enable_zlib+set}" = set; then
+ enableval=$enable_zlib; case "${enableval}" in
+ yes) enable_zlib="yes" ;;
+ no) enable_zlib="no" ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-zlib" >&5
+echo "$as_me: error: bad value ${enableval} for --enable-zlib" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ enable_zlib=yes
+
+fi
+
+if test "$enable_zlib" = "yes"; then
+ if test "${ac_cv_header_zlib_h+set}" = set; then
+ { echo "$as_me:$LINENO: checking for zlib.h" >&5
+echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; }
+if test "${ac_cv_header_zlib_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
+echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; }
+else
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking zlib.h usability" >&5
+echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <zlib.h>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking zlib.h presence" >&5
+echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <zlib.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: zlib.h: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: zlib.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: zlib.h: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: zlib.h: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: zlib.h: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: zlib.h: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: zlib.h: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: zlib.h: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: zlib.h: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: zlib.h: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to rsyslog@lists.adiscon.com. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for zlib.h" >&5
+echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; }
+if test "${ac_cv_header_zlib_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_header_zlib_h=$ac_header_preproc
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
+echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; }
+
+fi
+if test $ac_cv_header_zlib_h = yes; then
+ zlib_header="yes"
+else
+ zlib_header="no" enable_zlib="false"
+fi
+
+
+ if test "$zlib_header" = "yes"; then
+ { echo "$as_me:$LINENO: checking for deflate in -lz" >&5
+echo $ECHO_N "checking for deflate in -lz... $ECHO_C" >&6; }
+if test "${ac_cv_lib_z_deflate+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lz $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char deflate ();
+int
+main ()
+{
+return deflate ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ ac_cv_lib_z_deflate=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_lib_z_deflate=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_deflate" >&5
+echo "${ECHO_T}$ac_cv_lib_z_deflate" >&6; }
+if test $ac_cv_lib_z_deflate = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define USE_NETZIP 1
+_ACEOF
+
+ zlib_libs="-lz"
+
+else
+ enable_zlib="false"
+fi
+
+ fi
+fi
+
+# multithreading via pthreads
+# Check whether --enable-pthreads was given.
+if test "${enable_pthreads+set}" = set; then
+ enableval=$enable_pthreads; case "${enableval}" in
+ yes) enable_pthreads="yes" ;;
+ no) enable_pthreads="no" ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-pthreads" >&5
+echo "$as_me: error: bad value ${enableval} for --enable-pthreads" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ enable_pthreads=yes
+
+fi
+
+if test "$enable_pthreads" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define USE_PTHREADS 1
+_ACEOF
+
+ pthreads_libs="-lpthread"
+
+fi
+
+# klogd
+# Check whether --enable-klogd was given.
+if test "${enable_klogd+set}" = set; then
+ enableval=$enable_klogd; case "${enableval}" in
+ yes) enable_klogd="yes" ;;
+ no) enable_klogd="no" ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-klogd" >&5
+echo "$as_me: error: bad value ${enableval} for --enable-klogd" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ enable_klogd="yes"
+
+fi
+
+if test "$enable_klogd" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define FEATURE_KLOGD 1
+_ACEOF
+
+fi
+
+# debug
+# Check whether --enable-debug was given.
+if test "${enable_debug+set}" = set; then
+ enableval=$enable_debug; case "${enableval}" in
+ yes) enable_debug="yes" ;;
+ no) enable_debug="no" ;;
+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-debug" >&5
+echo "$as_me: error: bad value ${enableval} for --enable-debug" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+else
+ enable_debug="no"
+
+fi
+
+if test "$enable_debug" = "no"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define NDEBUG 1
+_ACEOF
+
+fi
+
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${enable_mysql_TRUE}" && test -z "${enable_mysql_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"enable_mysql\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"enable_mysql\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+
+# Save the log message, to keep $[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by rsyslog $as_me 1.16.0, which was
+generated by GNU Autoconf 2.61. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+rsyslog config.status 1.16.0
+configured by $0, generated by GNU Autoconf 2.61,
+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2006 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ { echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ CONFIG_SHELL=$SHELL
+ export CONFIG_SHELL
+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+#
+# Set up the sed scripts for CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+am__isrc!$am__isrc$ac_delim
+CYGPATH_W!$CYGPATH_W$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+install_sh!$install_sh$ac_delim
+STRIP!$STRIP$ac_delim
+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
+mkdir_p!$mkdir_p$ac_delim
+AWK!$AWK$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+am__leading_dot!$am__leading_dot$ac_delim
+AMTAR!$AMTAR$ac_delim
+am__tar!$am__tar$ac_delim
+am__untar!$am__untar$ac_delim
+CC!$CC$ac_delim
+CFLAGS!$CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+CPPFLAGS!$CPPFLAGS$ac_delim
+ac_ct_CC!$ac_ct_CC$ac_delim
+EXEEXT!$EXEEXT$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+DEPDIR!$DEPDIR$ac_delim
+am__include!$am__include$ac_delim
+am__quote!$am__quote$ac_delim
+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
+CCDEPMODE!$CCDEPMODE$ac_delim
+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
+CPP!$CPP$ac_delim
+GREP!$GREP$ac_delim
+EGREP!$EGREP$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+MYSQL_CONFIG!$MYSQL_CONFIG$ac_delim
+enable_mysql_TRUE!$enable_mysql_TRUE$ac_delim
+enable_mysql_FALSE!$enable_mysql_FALSE$ac_delim
+mysql_includes!$mysql_includes$ac_delim
+mysql_libs!$mysql_libs$ac_delim
+zlib_libs!$zlib_libs$ac_delim
+pthreads_libs!$pthreads_libs$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 87; then
+ break
+ elif $ac_last_try; then
+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+ ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
+_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ ac_file_inputs="$ac_file_inputs $ac_f"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input="Generated from "`IFS=:
+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ fi
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin";;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir="$ac_dir"
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out"; rm -f "$tmp/out";;
+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+ esac
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+_ACEOF
+
+# Transform confdefs.h into a sed script `conftest.defines', that
+# substitutes the proper values into config.h.in to produce config.h.
+rm -f conftest.defines conftest.tail
+# First, append a space to every undef/define line, to ease matching.
+echo 's/$/ /' >conftest.defines
+# Then, protect against being on the right side of a sed subst, or in
+# an unquoted here document, in config.status. If some macros were
+# called several times there might be several #defines for the same
+# symbol, which is useless. But do not sort them, since the last
+# AC_DEFINE must be honored.
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
+# NAME is the cpp macro being defined, VALUE is the value it is being given.
+# PARAMS is the parameter list in the macro definition--in most cases, it's
+# just an empty string.
+ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
+ac_dB='\\)[ (].*,\\1define\\2'
+ac_dC=' '
+ac_dD=' ,'
+
+uniq confdefs.h |
+ sed -n '
+ t rset
+ :rset
+ s/^[ ]*#[ ]*define[ ][ ]*//
+ t ok
+ d
+ :ok
+ s/[\\&,]/\\&/g
+ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
+ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
+ ' >>conftest.defines
+
+# Remove the space that was appended to ease matching.
+# Then replace #undef with comments. This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+# (The regexp can be short, since the line contains either #define or #undef.)
+echo 's/ $//
+s,^[ #]*u.*,/* & */,' >>conftest.defines
+
+# Break up conftest.defines:
+ac_max_sed_lines=50
+
+# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
+# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
+# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
+# et cetera.
+ac_in='$ac_file_inputs'
+ac_out='"$tmp/out1"'
+ac_nxt='"$tmp/out2"'
+
+while :
+do
+ # Write a here document:
+ cat >>$CONFIG_STATUS <<_ACEOF
+ # First, check the format of the line:
+ cat >"\$tmp/defines.sed" <<\\CEOF
+/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
+/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
+b
+:def
+_ACEOF
+ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
+ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
+ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
+ grep . conftest.tail >/dev/null || break
+ rm -f conftest.defines
+ mv conftest.tail conftest.defines
+done
+rm -f conftest.defines conftest.tail
+
+echo "ac_result=$ac_in" >>$CONFIG_STATUS
+cat >>$CONFIG_STATUS <<\_ACEOF
+ if test x"$ac_file" != x-; then
+ echo "/* $configure_input */" >"$tmp/config.h"
+ cat "$ac_result" >>"$tmp/config.h"
+ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f $ac_file
+ mv "$tmp/config.h" $ac_file
+ fi
+ else
+ echo "/* $configure_input */"
+ cat "$ac_result"
+ fi
+ rm -f "$tmp/out12"
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $ac_file | $ac_file:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X$ac_file : 'X\(//\)[^/]' \| \
+ X$ac_file : 'X\(//\)$' \| \
+ X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
+echo X$ac_file |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
+echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir=$dirpart/$fdir
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+ ;;
+
+ esac
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
+
+echo "****************************************************"
+echo "rsyslog will be compiled with the followig settings:"
+echo
+echo "Multithreading support enabled: $enable_pthreads"
+echo "Klogd functionality enabled: $enable_klogd"
+echo "Regular expressions support enabled: $enable_regexp"
+echo "Zlib compression support enabled: $enable_zlib"
+echo "MySql support enabled: $enable_mysql"
+echo "Large file support enabled: $enable_largefile"
+echo "Debug mode enabled: $enable_debug"
+
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 00000000..b242f8b2
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,179 @@
+# -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.61)
+AC_INIT(rsyslog, 1.16.0, rsyslog@lists.adiscon.com.)
+AM_INIT_AUTOMAKE(rsyslog, 1.16.0)
+AC_CONFIG_SRCDIR([syslogd.c])
+AC_CONFIG_HEADER([config.h])
+
+# Checks for programs.
+AC_PROG_CC
+AM_PROG_CC_C_O
+
+# Checks for libraries.
+
+# Checks for header files.
+AC_HEADER_RESOLV
+AC_HEADER_STDC
+AC_HEADER_SYS_WAIT
+AC_CHECK_HEADERS([arpa/inet.h fcntl.h locale.h netdb.h netinet/in.h paths.h stdio_ext.h stdlib.h string.h sys/file.h sys/ioctl.h sys/param.h sys/socket.h sys/time.h syslog.h unistd.h utmp.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_OFF_T
+AC_TYPE_PID_T
+AC_TYPE_SIZE_T
+AC_TYPE_SSIZE_T
+AC_HEADER_TIME
+AC_STRUCT_TM
+AC_C_VOLATILE
+
+# Checks for library functions.
+AC_FUNC_FORK
+AC_PROG_GCC_TRADITIONAL
+AC_FUNC_MALLOC
+AC_FUNC_REALLOC
+AC_FUNC_SELECT_ARGTYPES
+AC_TYPE_SIGNAL
+AC_FUNC_STAT
+AC_FUNC_VPRINTF
+AC_FUNC_WAIT3
+AC_CHECK_FUNCS([alarm gethostbyname gethostname gettimeofday memset regcomp select socket strcasecmp strchr strerror strndup strrchr strstr strtol strtoul uname])
+
+
+# Ugly stuff
+AC_DEFINE(SYSV, 1, [I'd like to get rid of this.])
+AC_DEFINE(SYSLOG_INET, 1, [Why there is this macro])
+
+
+# Large file support
+AC_ARG_ENABLE(largefile,
+ [AC_HELP_STRING([--enable-largefile],[Enable large file support @<:@default=yes@:>@])],
+ [case "${enableval}" in
+ yes) enable_largefile="yes" ;;
+ no) enable_largefile="no" ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-largefile) ;;
+ esac],
+ [enable_largefile="yes"]
+)
+if test "$enable_largefile" = "no"; then
+ AC_DEFINE(NOLARGEFILE, 1, [Defined when large file support is disabled.])
+fi
+
+# SQL support
+AC_ARG_ENABLE(mysql,
+ [AC_HELP_STRING([--enable-mysql],[Enable MySql database support @<:@default=no@:>@])],
+ [case "${enableval}" in
+ yes) enable_mysql="yes" ;;
+ no) enable_mysql="no" ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-mysql) ;;
+ esac],
+ [enable_mysql=no]
+)
+if test "$enable_mysql" = "yes"; then
+ AC_CHECK_PROG(MYSQL_CONFIG, mysql_config, yes)
+ if test x$MYSQL_CONFIG = xyes; then
+ AC_DEFINE(WITH_DB, 1, [MySql database support enabled])
+ mysql_includes=`mysql_config --cflags`
+ mysql_libs=`mysql_config --libs`
+ else
+ enable_mysql=no
+ fi
+fi
+AM_CONDITIONAL(enable_mysql, test x$enable_mysql = xyes)
+AC_SUBST(mysql_includes)
+AC_SUBST(mysql_libs)
+
+# Regular expressions
+AC_ARG_ENABLE(regexp,
+ [AC_HELP_STRING([--enable-regexp],[Enable regular expressions support @<:@default=yes@:>@])],
+ [case "${enableval}" in
+ yes) enable_regexp="yes" ;;
+ no) enable_regexp="no" ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-regexp) ;;
+ esac],
+ [enable_regexp=yes]
+)
+if test "$enable_regexp" = "yes"; then
+ AC_DEFINE(FEATURE_REGEXP, 1, [Regular expressions support enabled.])
+fi
+
+# zlib compression
+AC_ARG_ENABLE(zlib,
+ [AC_HELP_STRING([--enable-zlib],[Enable zlib compression support @<:@default=yes@:>@])],
+ [case "${enableval}" in
+ yes) enable_zlib="yes" ;;
+ no) enable_zlib="no" ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-zlib) ;;
+ esac],
+ [enable_zlib=yes]
+)
+if test "$enable_zlib" = "yes"; then
+ AC_CHECK_HEADER(zlib.h, [zlib_header="yes"], [zlib_header="no" enable_zlib="false"])
+ if test "$zlib_header" = "yes"; then
+ AC_CHECK_LIB(z, deflate,
+ [AC_DEFINE(USE_NETZIP, 1, [Define if you want to enable zlib support])
+ zlib_libs="-lz"
+ AC_SUBST(zlib_libs)], enable_zlib="false")
+ fi
+fi
+
+# multithreading via pthreads
+AC_ARG_ENABLE(pthreads,
+ [AC_HELP_STRING([--enable-pthreads],[Enable multithreading via pthreads @<:@default=yes@:>@])],
+ [case "${enableval}" in
+ yes) enable_pthreads="yes" ;;
+ no) enable_pthreads="no" ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-pthreads) ;;
+ esac],
+ [enable_pthreads=yes]
+)
+if test "$enable_pthreads" = "yes"; then
+ AC_DEFINE(USE_PTHREADS, 1, [Multithreading support enabled.])
+ pthreads_libs="-lpthread"
+ AC_SUBST(pthreads_libs)
+fi
+
+# klogd
+AC_ARG_ENABLE(klogd,
+ [AC_HELP_STRING([--enable-klogd],[Integrated klogd functionality @<:@default=yes@:>@])],
+ [case "${enableval}" in
+ yes) enable_klogd="yes" ;;
+ no) enable_klogd="no" ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-klogd) ;;
+ esac],
+ [enable_klogd="yes"]
+)
+if test "$enable_klogd" = "yes"; then
+ AC_DEFINE(FEATURE_KLOGD, 1, [klogd functionality is integrated.])
+fi
+
+# debug
+AC_ARG_ENABLE(debug,
+ [AC_HELP_STRING([--enable-debug],[Enable debug mode @<:@default=no@:>@])],
+ [case "${enableval}" in
+ yes) enable_debug="yes" ;;
+ no) enable_debug="no" ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-debug) ;;
+ esac],
+ [enable_debug="no"]
+)
+if test "$enable_debug" = "no"; then
+ AC_DEFINE(NDEBUG, 1, [Defined if debug mode is disabled.])
+fi
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+
+echo "****************************************************"
+echo "rsyslog will be compiled with the followig settings:"
+echo
+echo "Multithreading support enabled: $enable_pthreads"
+echo "Klogd functionality enabled: $enable_klogd"
+echo "Regular expressions support enabled: $enable_regexp"
+echo "Zlib compression support enabled: $enable_zlib"
+echo "MySql support enabled: $enable_mysql"
+echo "Large file support enabled: $enable_largefile"
+echo "Debug mode enabled: $enable_debug"
+
diff --git a/depcomp b/depcomp
new file mode 100755
index 00000000..ca5ea4e1
--- /dev/null
+++ b/depcomp
@@ -0,0 +1,584 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2006-10-15.18
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+ stat=$?
+
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/install-sh b/install-sh
new file mode 100755
index 00000000..4fbbae7b
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,507 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2006-10-14.15
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+posix_glob=
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chmodcmd=$chmodprog
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ shift
+ shift
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
+
+ -T) no_target_directory=true
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
+ esac
+
+ case $posix_glob in
+ '')
+ if (set -f) 2>/dev/null; then
+ posix_glob=true
+ else
+ posix_glob=false
+ fi ;;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob && set -f
+ set fnord $dstdir
+ shift
+ $posix_glob && set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dst"; then
+ $doit $rmcmd -f "$dst" 2>/dev/null \
+ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+ || {
+ echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ } || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/missing b/missing
new file mode 100755
index 00000000..1c8ff704
--- /dev/null
+++ b/missing
@@ -0,0 +1,367 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2006-05-10.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case $firstarg in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case $firstarg in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/syslogd.c b/syslogd.c
index f3bde6ca..3dffc346 100644
--- a/syslogd.c
+++ b/syslogd.c
@@ -137,11 +137,12 @@
#define MAXLINE 2048 /* maximum line length */
#define DEFUPRI (LOG_USER|LOG_NOTICE)
#define DEFSPRI (LOG_KERN|LOG_CRIT)
-//#define TIMERINTVL 30 /* interval for checking flush, mark */
-#define TIMERINTVL 20 /* interval for checking flush, mark */
+#define TIMERINTVL 30 /* interval for checking flush, mark */
#define CONT_LINE 1 /* Allow continuation lines */
+#include "config.h"
+
#ifdef MTRACE
#include <mcheck.h>
#endif
@@ -196,7 +197,6 @@
#ifndef TESTING
#include "pidfile.h"
#endif
-#include "version.h"
#include <assert.h>
@@ -7020,8 +7020,8 @@ static void die(int sig)
if (sig) {
dprintf(" exiting on signal %d\n", sig);
(void) snprintf(buf, sizeof(buf) / sizeof(char),
- " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION "." \
- PATCHLEVEL "\" x-pid=\"%d\"]" " exiting on signal %d.",
+ " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \
+ "\" x-pid=\"%d\"]" " exiting on signal %d.",
(int) myPid, sig);
errno = 0;
logmsgInternal(LOG_SYSLOG|LOG_INFO, buf, LocalHostName, ADDDATE);
@@ -7780,8 +7780,8 @@ static void init()
* rgerhards, 2005-08-17
*/
snprintf(bufStartUpMsg, sizeof(bufStartUpMsg)/sizeof(char),
- " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION "." \
- PATCHLEVEL "\" x-pid=\"%d\"][x-configInfo udpReception=\"%s\" " \
+ " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \
+ "\" x-pid=\"%d\"][x-configInfo udpReception=\"%s\" " \
"udpPort=\"%s\" tcpReception=\"%s\" tcpPort=\"%s\"]" \
" restart",
(int) myPid,
@@ -9719,7 +9719,7 @@ int main(int argc, char **argv)
bParseHOSTNAMEandTAG = 0;
break;
case 'v':
- printf("rsyslogd %s.%s, ", VERSION, PATCHLEVEL);
+ printf("rsyslogd %s, ", VERSION);
printf("compiled with:\n");
#ifdef USE_PTHREADS
printf("\tFEATURE_PTHREADS (dual-threading)\n");