diff options
| -rw-r--r-- | ChangeLog | 956 | ||||
| -rw-r--r-- | Makefile | 695 | ||||
| -rw-r--r-- | Makefile.am | 11 | ||||
| -rw-r--r-- | NEWS | 954 | ||||
| -rw-r--r-- | README (renamed from README.linux) | 0 | ||||
| -rw-r--r-- | aclocal.m4 | 896 | ||||
| -rwxr-xr-x | compile | 142 | ||||
| -rw-r--r-- | config.h | 275 | ||||
| -rwxr-xr-x | configure | 8572 | ||||
| -rw-r--r-- | configure.ac | 179 | ||||
| -rwxr-xr-x | depcomp | 584 | ||||
| -rwxr-xr-x | install-sh | 507 | ||||
| -rwxr-xr-x | missing | 367 | ||||
| -rw-r--r-- | syslogd.c | 16 |
14 files changed, 13182 insertions, 972 deletions
diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 00000000..8a3025b6 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,956 @@ +--------------------------------------------------------------------------- +Version 1.16.0 (RGer/Peter Vrabec), 2007-07-1? +- build system switched to autotools +--------------------------------------------------------------------------- +Version 1.15.1 (RGer), 2007-07-10 +- fixed a bug that caused a dynaFile selector to stall when there was + an open error with one file +- improved template processing for dynaFiles; templates are now only + looked up during initialization - speeds up processing +- optimized memory layout in struct filed when compiled with MySQL + support +- fixed a bug that caused compilation without SYSLOG_INET to fail +- re-enabled the "last message repeated n times" feature. This + feature was not taken care of while rsyslogd evolved from sysklogd + and it was more or less defunct. Now it is fully functional again. +- added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE +- fixed a bug in iovAsString() that caused a memory leak under stress + conditions (most probably memory shortage). This was unlikely to + ever happen, but it doesn't hurt doing it right +- cosmetic: defined type "uchar", change all unsigned chars to uchar +--------------------------------------------------------------------------- +Version 1.15.0 (RGer), 2007-07-05 +- added ability to dynamically generate file names based on templates + and thus properties. This was a much-requested feature. It makes + life easy when it e.g. comes to splitting files based on the sender + address. +- added $umask and $FileCreateMode config file directives +- applied a patch from Bartosz Kuzma to compile cleanly under NetBSD +- checks for extra (unexpected) characters in system config file lines + have been added +- added IPv6 documentation - was accidently missing from CVS +- begun to change char to unsigned char +--------------------------------------------------------------------------- +Version 1.14.2 (RGer), 2007-07-03 +** this release fixes all known nits with IPv6 ** +- restored capability to do /etc/service lookup for "syslog" + service when -r 0 was given +- documented IPv6 handling of syslog messages +- integrate patch from Bartosz Kuźma to make rsyslog compile under + Solaris again (the patch replaced a strndup() call, which is not + available under Solaris +- improved debug logging when waiting on select +- updated rsyslogd man page with new options (-46A) +--------------------------------------------------------------------------- +Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29 +- added Peter Vrabec's patch for IPv6 TCP +- prefixed all messages send to stderr in rsyslogd with "rsyslogd: " +--------------------------------------------------------------------------- +Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28 +- Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled + IPv6 Support is currently for UDP only, TCP is to come soon. + AllowedSender configuration does not yet work for IPv6. +- fixed code in iovCreate() that broke C's strict aliasing rules +- fixed some char/unsigned char differences that forced the compiler + to spit out warning messages +- updated the Red Hat init script to fix a known issue (thanks to + Peter Vrabec) +--------------------------------------------------------------------------- +Version 1.13.5 (RGer), 2007-06-22 +- made the TCP session limit configurable via command line switch + now -t <port>,<max sessions> +- added man page for rklogd(8) (basically a copy from klogd, but now + there is one...) +- fixed a bug that caused internal messages (e.g. rsyslogd startup) to + appear without a tag. +- removed a minor memory leak that occurred when TAG processing requalified + a HOSTNAME to be a TAG (and a TAG already was set). +- removed potential small memory leaks in MsgSet***() functions. There + would be a leak if a property was re-set, something that happened + extremely seldom. +--------------------------------------------------------------------------- +Version 1.13.4 (RGer), 2007-06-18 +- added a new property "PRI-text", which holds the PRI field in + textual form (e.g. "syslog.info") +- added alias "syslogseverity" for "syslogpriority", which is a + misleading property name that needs to stay for historical + reasons (and backward-compatility) +- added doc on how to record PRI value in log file +- enhanced signal handling in klogd, including removal of an unsafe + call to the logging system during signal handling +--------------------------------------------------------------------------- +Version 1.13.3 (RGer), 2007-06-15 +- create a version of syslog.c from scratch. This is now + - highly optimized for rsyslog + - removes an incompatible license problem as the original + version had a BSD license with advertising clause + - fixed in the regard that rklogd will continue to work when + rsysogd has been restarted (the original version, as well + as sysklogd, will remain silent then) + - solved an issue with an extra NUL char at message end that the + original version had +- applied some changes to klogd to care for the new interface +- fixed a bug in syslogd.c which prevented compiling under debian +--------------------------------------------------------------------------- +Version 1.13.2 (RGer), 2007-06-13 +- lib order in makefile patched to facilitate static linking - thanks + to Bennett Todd for providing the patch +- Integrated a patch from Peter Vrabec (pvrabec@redheat.com): + - added klogd under the name of rklogd (remove dependency on + original sysklogd package + - createDB.sql now in UTF + - added additional config files for use on Red Hat +--------------------------------------------------------------------------- +Version 1.13.1 (RGer), 2007-02-05 +- changed the listen backlog limit to a more reasonable value based on + the maximum number of TCP connections configurd (10% + 5) - thanks to Guy + Standen for the hint (actually, the limit was 5 and that was a + left-over from early testing). +- fixed a bug in makefile which caused DB-support to be disabled when + NETZIP support was enabled +- added the -e option to allow transmission of every message to remote + hosts (effectively turns off duplicate message suppression) +- (somewhat) improved memory consumption when compiled with MySQL support +- looks like we fixed an incompatibility with MySQL 5.x and above software + At least in one case, the remote server name was destroyed, leading to + a connection failure. The new, improved code does not have this issue and + so we see this as solved (the new code is generally somewhat better, so + there is a good chance we fixed this incompatibility). +--------------------------------------------------------------------------- +Version 1.13.0 (RGer), 2006-12-19 +- added '$' as ToPos proptery replacer specifier - means "up to the + end of the string" +- property replacer option "escape-cc", "drop-cc" and "space-cc" added +- changed the handling of \0 characters inside syslog messages. We now + consistently escape them to "#000". This is somewhat recommended in + the draft-ietf-syslog-protocol-19 draft. While the real recomendation + is to not escape any characters at all, we can not do this without + considerable modification of the code. So we escape it to "#000", which + is consistent with a sample found in the Internet-draft. +- removed message glue logic (see printchopped() comment for details) + Also caused removal of parts table and thus some improvements in + memory usage. +- changed the default MAXLINE to 2048 to take care of recent syslog + standardization efforts (can easily be changed in syslogd.c) +- added support for byte-counted TCP syslog messages (much like + syslog-transport-tls-05 Internet Draft). This was necessary to + support compression over TCP. +- added support for receiving compressed syslog messages +- added support for sending compressed syslog messages +- fixed a bug where the last message in a syslog/tcp stream was + lost if it was not properly terminated by a LF character +--------------------------------------------------------------------------- +Version 1.12.3 (RGer), 2006-10-04 +- implemented some changes to support Solaris (but support is not + yet complete) +- commented out (via #if 0) some methods that are currently not being use + but should be kept for further us +- added (interim) -u 1 option to turn off hostname and tag parsing +- done some modifications to better support Fedora +- made the field delimiter inside property replace configurable via + template +- fixed a bug in property replacer: if fields were used, the delimitor + became part of the field. Up until now, this was barely noticable as + the delimiter as TAB only and thus invisible to a human. With other + delimiters available now, it quickly showed up. This bug fix might cause + some grief to existing installations if they used the extra TAB for + whatever reasons - sorry folks... Anyhow, a solution is easy: just add + a TAB character contstant into your template. Thus, there has no attempt + been made to do this in a backwards-compatible way. +--------------------------------------------------------------------------- +Version 1.12.2 (RGer), 2006-02-15 +- fixed a bug in the RFC 3339 date formatter. An extra space was added + after the actual timestamp +- added support for providing high-precision RFC3339 timestamps for + (rsyslogd-)internally-generated messages +- very (!) experimental support for syslog-protocol internet draft + added (the draft is experimental, the code is solid ;)) +- added support for field-extracting in the property replacer +- enhanced the legacy-syslog parser so that it can interpret messages + that do not contain a TIMESTAMP +- fixed a bug that caused the default socket (usually /dev/log) to be + opened even when -o command line option was given +- fixed a bug in the Debian sample startup script - it caused rsyslogd + to listen to remote requests, which it shouldn't by default +--------------------------------------------------------------------------- +Version 1.12.1 (RGer), 2005-11-23 +- made multithreading work with BSD. Some signal-handling needed to be + restructured. Also, there might be a slight delay of up to 10 seconds + when huping and terminating rsyslogd under BSD +- fixed a bug where a NULL-pointer was passed to printf() in logmsg(). +- fixed a bug during "make install" where rc3195d was not installed + Thanks to Bennett Todd for spotting this. +- fixed a bug where rsyslogd dumped core when no TAG was found in the + received message +- enhanced message parser so that it can deal with missing hostnames + in many cases (may not be totally fail-safe) +- fixed a bug where internally-generated messages did not have the correct + TAG +--------------------------------------------------------------------------- +Version 1.12.0 (RGer), 2005-10-26 +- moved to a multi-threaded design. single-threading is still optionally + available. Multi-threading is experimental! +- fixed a potential race condition. In the original code, marking was done + by an alarm handler, which could lead to all sorts of bad things. This + has been changed now. See comments in syslogd.c/domark() for details. +- improved debug output for property-based filters +- not a code change, but: I have checked all exit()s to make sure that + none occurs once rsyslogd has started up. Even in unusual conditions + (like low-memory conditions) rsyslogd somehow remains active. Of course, + it might loose a message or two, but at least it does not abort and it + can also recover when the condition no longer persists. +- fixed a bug that could cause loss of the last message received + immediately before rsyslogd was terminated. +- added comments on thread-safety of global variables in syslogd.c +- fixed a small bug: spurios printf() when TCP syslog was used +- fixed a bug that causes rsyslogd to dump core on termination when one + of the selector lines did not receive a message during the run (very + unlikely) +- fixed an one-too-low memory allocation in the TCP sender. Could result + in rsyslogd dumping core. +- fixed a bug with regular expression support (thanks to Andres Riancho) +- a little bit of code restructuring (especially main(), which was + horribly large) +--------------------------------------------------------------------------- +Version 1.11.1 (RGer), 2005-10-19 +- support for BSD-style program name and host blocks +- added a new property "programname" that can be used in templates +- added ability to specify listen port for rfc3195d +- fixed a bug that rendered the "startswith" comparison operation + unusable. +- changed more functions to "static" storage class to help compiler + optimize (should have been static in the first place...) +- fixed a potential memory leak in the string buffer class destructor. + As the destructur was previously never called, the leak did not actually + appear. +- some internal restructuring in anticipation/preparation of minimal + multi-threading support +- rsyslogd still shares some code with the sysklogd project. Some patches + for this shared code have been brought over from the sysklogd CVS. +--------------------------------------------------------------------------- +Version 1.11.0 (RGer), 2005-10-12 +- support for receiving messages via RFC 3195; added rfc3195d for that + purpose +- added an additional guard to prevent rsyslogd from aborting when the + 2gb file size limit is hit. While a user can configure rsyslogd to + handle such situations, it would abort if that was not done AND large + file support was not enabled (ok, this is hopefully an unlikely scenario) +- fixed a bug that caused additional Unix domain sockets to be incorrectly + processed - could lead to message loss in extreme cases +--------------------------------------------------------------------------- +Version 1.10.2 (RGer), 2005-09-27 +- added comparison operations in property-based filters: + * isequal + * startswith +- added ability to negate all property-based filter comparison operations + by adding a !-sign right in front of the operation name +- added the ability to specify remote senders for UDP and TCP + received messages. Allows to block all but well-known hosts +- changed the $-config line directives to be case-INsensitive +- new command line option -w added: "do not display warnings if messages + from disallowed senders are received" +- fixed a bug that caused rsyslogd to dump core when the compare value + was not quoted in property-based filters +- fixed a bug in the new CStr compare function which lead to invalid + results (fortunately, this function was not yet used widely) +- added better support for "debugging" rsyslog.conf property filters + (only if -d switch is given) +- changed some function definitions to static, which eventually enables + some compiler optimizations +- fixed a bug in MySQL code; when a SQL error occured, rsyslogd could + run in a tight loop. This was due to invalid sequence of error reporting + and is now fixed. +--------------------------------------------------------------------------- +Version 1.10.1 (RGer), 2005-09-23 +- added the ability to execute a shell script as an action. + Thanks to Bjoern Kalkbrenner for providing the code! +- fixed a bug in the MySQL code; due to the bug the automatic one-time + retry after an error did not happen - this lead to error message in + cases where none should be seen (e.g. after a MySQL restart) +- fixed a security issue with SQL-escaping in conjunction with + non-(SQL-)standard MySQL features. +--------------------------------------------------------------------------- +Version 1.10.0 (RGer), 2005-09-20 + REMINDER: 1.10 is the first unstable version if the 1.x series! +- added the capability to filter on any property in selector lines + (not just facility and priority) +- changed stringbuf into a new counted string class +- added support for a "discard" action. If a selector line with + discard (~ character) is found, no selector lines *after* that + line will be processed. +- thanks to Andres Riancho, regular expression support has been + added to the template engine +- added the FROMHOST property in the template processor, which could + previously not be obtained. Thanks to Cristian Testa for pointing + this out and even providing a fix. +- added display of compile-time options to -v output +- performance improvement for production build - made some checks + to happen only during debug mode +- fixed a problem with compiling on SUSE and - while doing so - removed + the socket call to set SO_BSDCOMPAT in cases where it is obsolete. +--------------------------------------------------------------------------- +Version 1.0.4 (RGer), 2006-02-01 +- a small but important fix: the tcp receiver had two forgotten printf's + in it that caused a lot of unnecessary output to stdout. This was + important enough to justify a new release +--------------------------------------------------------------------------- +Version 1.0.3 (RGer), 2005-11-14 +- added an additional guard to prevent rsyslogd from aborting when the + 2gb file size limit is hit. While a user can configure rsyslogd to + handle such situations, it would abort if that was not done AND large + file support was not enabled (ok, this is hopefully an unlikely scenario) +- fixed a bug that caused additional Unix domain sockets to be incorrectly + processed - could lead to message loss in extreme cases +- applied some patches available from the sysklogd project to code + shared from there +- fixed a bug that causes rsyslogd to dump core on termination when one + of the selector lines did not receive a message during the run (very + unlikely) +- fixed an one-too-low memory allocation in the TCP sender. Could result + in rsyslogd dumping core. +- fixed a bug in the TCP sender that caused the retry logic to fail + after an error or receiver overrun +- fixed a bug in init() that could lead to dumping core +- fixed a bug that could lead to dumping core when no HOSTNAME or no TAG + was present in the syslog message +--------------------------------------------------------------------------- +Version 1.0.2 (RGer), 2005-10-05 +- fixed an issue with MySQL error reporting. When an error occured, + the MySQL driver went into an endless loop (at least in most cases). +--------------------------------------------------------------------------- +Version 1.0.1 (RGer), 2005-09-23 +- fixed a security issue with SQL-escaping in conjunction with + non-(SQL-)standard MySQL features. +--------------------------------------------------------------------------- +Version 1.0.0 (RGer), 2005-09-12 +- changed install doc to cover daily cron scripts - a trouble source +- added rc script for slackware (provided by Chris Elvidge - thanks!) +- fixed a really minor bug in usage() - the -r option was still + reported as without the port parameter +--------------------------------------------------------------------------- +Version 0.9.8 (RGer), 2005-09-05 +- made startup and shutdown message more consistent and included the + pid, so that they can be easier correlated. Used syslog-protocol + structured data format for this purpose. +- improved config info in startup message, now tells not only + if it is listening remote on udp, but also for tcp. Also includes + the port numbers. The previous startup message was misleading, because + it did not say "remote reception" if rsyslogd was only listening via + tcp (but not via udp). +- added a "how can you help" document to the doc set +--------------------------------------------------------------------------- +Version 0.9.7 (RGer), 2005-08-15 +- some of the previous doc files (like INSTALL) did not properly + reflect the changes to the build process and the new doc. Fixed + that. +- changed syslogd.c so that when compiled without database support, + an error message is displayed when a database action is detected + in the config file (previously this was used as an user rule ;)) +- fixed a bug in the os-specific Makefiles which caused MySQL + support to not be compiled, even if selected +--------------------------------------------------------------------------- +Version 0.9.6 (RGer), 2005-08-09 +- greatly enhanced documentation. Now available in html format in + the "doc" folder and FreeBSD. Finally includes an install howto. +- improved MySQL error messages a little - they now show up as log + messages, too (formerly only in debug mode) +- added the ability to specify the listen port for udp syslog. + WARNING: This introduces an incompatibility. Formerly, udp + syslog was enabled by the -r command line option. Now, it is + "-r [port]", which is consistent with the tcp listener. However, + just -r will now return an error message. +- added sample startup scripts for Debian and FreeBSD +- added support for easy feature selection in the makefile. Un- + fortunately, this also means I needed to spilt the make file + for different OS and distros. There are some really bad syntax + differences between FreeBSD and Linux make. +--------------------------------------------------------------------------- +Version 0.9.5 (RGer), 2005-08-01 +- the "semicolon bug" was actually not (fully) solved in 0.9.4. One + part of the bug was solved, but another still existed. This one + is fixed now, too. +- the "semicolon bug" actually turned out to be a more generic bug. + It appeared whenever an invalid template name was given. With some + selector actions, rsyslogd dumped core, with other it "just" had + a small ressource leak with others all worked well. These anomalies + are now fixed. Note that they only appeared during system initaliziation + once the system was running, nothing bad happened. +- improved error reporting for template errors on startup. They are now + shown on the console and the start-up tty. Formerly, they were only + visible in debug mode. +- support for multiple instances of rsyslogd on a single machine added +- added new option "-o" --> omit local unix domain socket. This option + enables rsyslogd NOT to listen to the local socket. This is most + helpful when multiple instances of rsyslogd (or rsyslogd and another + syslogd) shall run on a single system. +- added new option "-i <pidfile>" which allows to specify the pidfile. + This is needed when multiple instances of rsyslogd are to be run. +- the new project home page is now online at www.rsyslog.com +--------------------------------------------------------------------------- +Version 0.9.4 (RGer), 2005-07-25 +- finally added the TCP sender. It now supports non-blocking mode, no + longer disabling message reception during connect. As it is now, it + is usable in production. The code could be more sophisticated, but + I've kept it short in anticipation of the move to liblogging, which + will lead to the removal of the code just written ;) +- the "exiting on signal..." message still had the "syslogd" name in + it. Changed this to "rsyslogd", as we do not have a large user base + yet, this should pose no problem. +- fixed "the semiconlon" bug. rsyslogd dumped core if a write-db action + was specified but no semicolon was given after the password (an empty + template was ok, but the semicolon needed to be present). +- changed a default for traditional output format. During testing, it + was seen that the timestamp written to file in default format was + the time of message reception, not the time specified in the TIMESTAMP + field of the message itself. Traditionally, the message TIMESTAMP is + used and this has been changed now. +--------------------------------------------------------------------------- +Version 0.9.3 (RGer), 2005-07-19 +- fixed a bug in the message parser. In June, the RFC 3164 timestamp + was not correctly parsed (yes, only in June and some other months, + see the code comment to learn why...) +- added the ability to specify the destination port when forwarding + syslog messages (both for TCP and UDP) +- added an very experimental TCP sender (activated by + @@machine:port in config). This is not yet for production use. If + the receiver is not alive, rsyslogd will wait quite some time until + the connection request times out, which most probably leads to + loss of incoming messages. + +--------------------------------------------------------------------------- +Version 0.9.2 (RGer), around 2005-07-06 +- I intended to change the maxsupported message size to 32k to + support IHE - but given the memory inefficiency in the usual use + cases, I have not done this. I have, however, included very + specific instructions on how to do this in the source code. I have + also done some testing with 32k messages, so you can change the + max size without taking too much risk. +- added a syslog/tcp receiver; we now can receive messages via + plain tcp, but we can still send only via UDP. The syslog/tcp + receiver is the primary enhancement of this release. +- slightly changed some error messages that contained a spurios \n at + the end of the line (which gives empty lines in your log...) + +--------------------------------------------------------------------------- +Version 0.9.1 (RGer) +- fixed code so that it compiles without errors under FreeBSD +- removed now unused function "allocate_log()" from syslogd.c +- changed the make file so that it contains more defines for + different environments (in the long term, we need a better + system for disabling/enabling features...) +- changed some printf's printing off_t types to %lld and + explicit (long long) casts. I tried to figure out the exact type, + but did not succeed in this. In the worst case, ultra-large peta- + byte files will now display funny informational messages on rollover, + something I think we can live with for the next 10 years or so... + +--------------------------------------------------------------------------- +Version 0.9.0 (RGer) +- changed the filed structure to be a linked list. Previously, it + was a table - well, for non-SYSV it was defined as linked list, + but from what I see that code did no longer work after my + modifications. I am now using a linked list in general because + that is needed for other upcoming modifications. +- fixed a bug that caused rsyslogd not to listen to anything if + the configuration file could not be read +- pervious versions disabled network logging (send/receive) if + syslog/udp port was not in /etc/services. Now defaulting to + port 514 in this case. +- internal error messages are now supported up to 256 bytes +- error message seen during config file read are now also displayed + to the attached tty and not only the console +- changed some error messages during init to be sent to the console + and/or emergency log. Previously, they were only seen if the + -d (debug) option was present on the command line. +- fixed the "2gb file issue on 32bit systems". If a file grew to + more than 2gb, the syslogd was aborted with "file size exceeded". + Now, defines have been added according to + http://www.daimi.au.dk/~kasperd/comp.os.linux.development.faq.html#LARGEFILE + Testing revealed that they work ;) + HOWEVER, if your file system, glibc, kernel, whatever does not + support files larger 2gb, you need to set a file size limit with + the new output channel mechanism. +- updated man pages to reflect the changes + +--------------------------------------------------------------------------- +Version 0.8.4 + +- improved -d debug output (removed developer-only content) +- now compiles under FreeBSD and NetBSD (only quick testing done on NetBSD) +--------------------------------------------------------------------------- +Version 0.8.3 + +- security model in "make install" changed +- minor doc updates +--------------------------------------------------------------------------- +Version 0.8.2 + +- added man page for rsyslog.conf and rsyslogd +- gave up on the concept of rsyslog being a "drop in" replacement + for syslogd. Now, the user installs rsyslogd and also needs to + adjust his system settings to this specifically. This also lead + to these changes: + * changed Makefile so that install now installs rsyslogd instead + of dealing with syslogd + * changed the default config file name to rsyslog.conf +--------------------------------------------------------------------------- +Version 0.8.1 + +- fixed a nasty memory leak (probably not the last one with this release) +- some enhancements to Makefile as suggested by Bennett Todd +- syslogd-internal messages (like restart) were missing the hostname + this has been corrected +--------------------------------------------------------------------------- +Version 0.8.0 + +Initial testing release. Based on the sysklogd package. Thanks to the +sysklogd maintainers for all their good work! +--------------------------------------------------------------------------- + +---------------------------------------------------------------------- +The following comments are from the stock syslogd.c source. They provide +some insight into what happened to the source before we forked +rsyslogd. However, much of the code already has been replaced and more +is to be replaced. So over time, these comments become less valuable. +I have moved them out of the syslogd.c file to shrink it, especially +as a lot of them do no longer apply. For historical reasons and +understanding of how the daemon evolved, they are probably still +helpful. +---------------------------------------------------------------------- +/* + * syslogd -- log system messages + * + * This program implements a system log. It takes a series of lines. + * Each line may have a priority, signified as "<n>" as + * the first characters of the line. If this is + * not present, a default priority is used. + * + * To kill syslogd, send a signal 15 (terminate). A signal 1 (hup) will + * cause it to reread its configuration file. + * + * Defined Constants: + * + * MAXLINE -- the maximum line length that can be handled. + * DEFUPRI -- the default priority for user messages + * DEFSPRI -- the default priority for kernel messages + * + * Author: Eric Allman + * extensive changes by Ralph Campbell + * more extensive changes by Eric Allman (again) + * + * Steve Lord: Fix UNIX domain socket code, added linux kernel logging + * change defines to + * SYSLOG_INET - listen on a UDP socket + * SYSLOG_UNIXAF - listen on unix domain socket + * SYSLOG_KERNEL - listen to linux kernel + * + * Mon Feb 22 09:55:42 CST 1993: Dr. Wettstein + * Additional modifications to the source. Changed priority scheme + * to increase the level of configurability. In its stock configuration + * syslogd no longer logs all messages of a certain priority and above + * to a log file. The * wildcard is supported to specify all priorities. + * Note that this is a departure from the BSD standard. + * + * Syslogd will now listen to both the inetd and the unixd socket. The + * strategy is to allow all local programs to direct their output to + * syslogd through the unixd socket while the program listens to the + * inetd socket to get messages forwarded from other hosts. + * + * Fri Mar 12 16:55:33 CST 1993: Dr. Wettstein + * Thanks to Stephen Tweedie (dcs.ed.ac.uk!sct) for helpful bug-fixes + * and an enlightened commentary on the prioritization problem. + * + * Changed the priority scheme so that the default behavior mimics the + * standard BSD. In this scenario all messages of a specified priority + * and above are logged. + * + * Add the ability to specify a wildcard (=) as the first character + * of the priority name. Doing this specifies that ONLY messages with + * this level of priority are to be logged. For example: + * + * *.=debug /usr/adm/debug + * + * Would log only messages with a priority of debug to the /usr/adm/debug + * file. + * + * Providing an * as the priority specifies that all messages are to be + * logged. Note that this case is degenerate with specifying a priority + * level of debug. The wildcard * was retained because I believe that + * this is more intuitive. + * + * Thu Jun 24 11:34:13 CDT 1993: Dr. Wettstein + * Modified sources to incorporate changes in libc4.4. Messages from + * syslog are now null-terminated, syslogd code now parses messages + * based on this termination scheme. Linux as of libc4.4 supports the + * fsync system call. Modified code to fsync after all writes to + * log files. + * + * Sat Dec 11 11:59:43 CST 1993: Dr. Wettstein + * Extensive changes to the source code to allow compilation with no + * complaints with -Wall. + * + * Reorganized the facility and priority name arrays so that they + * compatible with the syslog.h source found in /usr/include/syslog.h. + * NOTE that this should really be changed. The reason I do not + * allow the use of the values defined in syslog.h is on account of + * the extensions made to allow the wildcard character in the + * priority field. To fix this properly one should malloc an array, + * copy the contents of the array defined by syslog.h and then + * make whatever modifications that are desired. Next round. + * + * Thu Jan 6 12:07:36 CST 1994: Dr. Wettstein + * Added support for proper decomposition and re-assembly of + * fragment messages on UNIX domain sockets. Lack of this capability + * was causing 'partial' messages to be output. Since facility and + * priority information is encoded as a leader on the messages this + * was causing lines to be placed in erroneous files. + * + * Also added a patch from Shane Alderton (shane@ion.apana.org.au) to + * correct a problem with syslogd dumping core when an attempt was made + * to write log messages to a logged-on user. Thank you. + * + * Many thanks to Juha Virtanen (jiivee@hut.fi) for a series of + * interchanges which lead to the fixing of problems with messages set + * to priorities of none and emerg. Also thanks to Juha for a patch + * to exclude users with a class of LOGIN from receiving messages. + * + * Shane Alderton provided an additional patch to fix zombies which + * were conceived when messages were written to multiple users. + * + * Mon Feb 6 09:57:10 CST 1995: Dr. Wettstein + * Patch to properly reset the single priority message flag. Thanks + * to Christopher Gori for spotting this bug and forwarding a patch. + * + * Wed Feb 22 15:38:31 CST 1995: Dr. Wettstein + * Added version information to startup messages. + * + * Added defines so that paths to important files are taken from + * the definitions in paths.h. Hopefully this will insure that + * everything follows the FSSTND standards. Thanks to Chris Metcalf + * for a set of patches to provide this functionality. Also thanks + * Elias Levy for prompting me to get these into the sources. + * + * Wed Jul 26 18:57:23 MET DST 1995: Martin Schulze + * Linux' gethostname only returns the hostname and not the fqdn as + * expected in the code. But if you call hostname with an fqdn then + * gethostname will return an fqdn, so we have to mention that. This + * has been changed. + * + * The 'LocalDomain' and the hostname of a remote machine is + * converted to lower case, because the original caused some + * inconsistency, because the (at least my) nameserver did respond an + * fqdn containing of upper- _and_ lowercase letters while + * 'LocalDomain' consisted only of lowercase letters and that didn't + * match. + * + * Sat Aug 5 18:59:15 MET DST 1995: Martin Schulze + * Now no messages that were received from any remote host are sent + * out to another. At my domain this missing feature caused ugly + * syslog-loops, sometimes. + * + * Remember that no message is sent out. I can't figure out any + * scenario where it might be useful to change this behavior and to + * send out messages to other hosts than the one from which we + * received the message, but I might be shortsighted. :-/ + * + * Thu Aug 10 19:01:08 MET DST 1995: Martin Schulze + * Added my pidfile.[ch] to it to perform a better handling with + * pidfiles. Now both, syslogd and klogd, can only be started + * once. They check the pidfile. + * + * Sun Aug 13 19:01:41 MET DST 1995: Martin Schulze + * Add an addition to syslog.conf's interpretation. If a priority + * begins with an exclamation mark ('!') the normal interpretation + * of the priority is inverted: ".!*" is the same as ".none", ".!=info" + * don't logs the info priority, ".!crit" won't log any message with + * the priority crit or higher. For example: + * + * mail.*;mail.!=info /usr/adm/mail + * + * Would log all messages of the facility mail except those with + * the priority info to /usr/adm/mail. This makes the syslogd + * much more flexible. + * + * Defined TABLE_ALLPRI=255 and changed some occurrences. + * + * Sat Aug 19 21:40:13 MET DST 1995: Martin Schulze + * Making the table of facilities and priorities while in debug + * mode more readable. + * + * If debugging is turned on, printing the whole table of + * facilities and priorities every hexadecimal or 'X' entry is + * now 2 characters wide. + * + * The number of the entry is prepended to each line of + * facilities and priorities, and F_UNUSED lines are not shown + * anymore. + * + * Corrected some #ifdef SYSV's. + * + * Mon Aug 21 22:10:35 MET DST 1995: Martin Schulze + * Corrected a strange behavior during parsing of configuration + * file. The original BSD syslogd doesn't understand spaces as + * separators between specifier and action. This syslogd now + * understands them. The old behavior caused some confusion over + * the Linux community. + * + * Thu Oct 19 00:02:07 MET 1995: Martin Schulze + * The default behavior has changed for security reasons. The + * syslogd will not receive any remote message unless you turn + * reception on with the "-r" option. + * + * Not defining SYSLOG_INET will result in not doing any network + * activity, i.e. not sending or receiving messages. I changed + * this because the old idea is implemented with the "-r" option + * and the old thing didn't work anyway. + * + * Thu Oct 26 13:14:06 MET 1995: Martin Schulze + * Added another logfile type F_FORW_UNKN. The problem I ran into + * was a name server that runs on my machine and a forwarder of + * kern.crit to another host. The hosts address can only be + * fetched using the nameserver. But named is started after + * syslogd, so syslogd complained. + * + * This logfile type will retry to get the address of the + * hostname ten times and then complain. This should be enough to + * get the named up and running during boot sequence. + * + * Fri Oct 27 14:08:15 1995: Dr. Wettstein + * Changed static array of logfiles to a dynamic array. This + * can grow during process. + * + * Fri Nov 10 23:08:18 1995: Martin Schulze + * Inserted a new tabular sys_h_errlist that contains plain text + * for error codes that are returned from the net subsystem and + * stored in h_errno. I have also changed some wrong lookups to + * sys_errlist. + * + * Wed Nov 22 22:32:55 1995: Martin Schulze + * Added the fabulous strip-domain feature that allows us to + * strip off (several) domain names from the fqdn and only log + * the simple hostname. This is useful if you're in a LAN that + * has a central log server and also different domains. + * + * I have also also added the -l switch do define hosts as + * local. These will get logged with their simple hostname, too. + * + * Thu Nov 23 19:02:56 MET DST 1995: Martin Schulze + * Added the possibility to omit fsyncing of logfiles after every + * write. This will give some performance back if you have + * programs that log in a very verbose manner (like innd or + * smartlist). Thanks to Stephen R. van den Berg <srb@cuci.nl> + * for the idea. + * + * Thu Jan 18 11:14:36 CST 1996: Dr. Wettstein + * Added patche from beta-testers to stop compile error. Also + * added removal of pid file as part of termination cleanup. + * + * Wed Feb 14 12:42:09 CST 1996: Dr. Wettstein + * Allowed forwarding of messages received from remote hosts to + * be controlled by a command-line switch. Specifying -h allows + * forwarding. The default behavior is to disable forwarding of + * messages which were received from a remote host. + * + * Parent process of syslogd does not exit until child process has + * finished initialization process. This allows rc.* startup to + * pause until syslogd facility is up and operating. + * + * Re-arranged the select code to move UNIX domain socket accepts + * to be processed later. This was a contributed change which + * has been proposed to correct the delays sometimes encountered + * when syslogd starts up. + * + * Minor code cleanups. + * + * Thu May 2 15:15:33 CDT 1996: Dr. Wettstein + * Fixed bug in init function which resulted in file descripters + * being orphaned when syslogd process was re-initialized with SIGHUP + * signal. Thanks to Edvard Tuinder + * (Edvard.Tuinder@praseodymium.cistron.nl) for putting me on the + * trail of this bug. I am amazed that we didn't catch this one + * before now. + * + * Tue May 14 00:03:35 MET DST 1996: Martin Schulze + * Corrected a mistake that causes the syslogd to stop logging at + * some virtual consoles under Linux. This was caused by checking + * the wrong error code. Thanks to Michael Nonweiler + * <mrn20@hermes.cam.ac.uk> for sending me a patch. + * + * Mon May 20 13:29:32 MET DST 1996: Miquel van Smoorenburg <miquels@cistron.nl> + * Added continuation line supported and fixed a bug in + * the init() code. + * + * Tue May 28 00:58:45 MET DST 1996: Martin Schulze + * Corrected behaviour of blocking pipes - i.e. the whole system + * hung. Michael Nonweiler <mrn20@hermes.cam.ac.uk> has sent us + * a patch to correct this. A new logfile type F_PIPE has been + * introduced. + * + * Mon Feb 3 10:12:15 MET DST 1997: Martin Schulze + * Corrected behaviour of logfiles if the file can't be opened. + * There was a bug that causes syslogd to try to log into non + * existing files which ate cpu power. + * + * Sun Feb 9 03:22:12 MET DST 1997: Martin Schulze + * Modified syslogd.c to not kill itself which confuses bash 2.0. + * + * Mon Feb 10 00:09:11 MET DST 1997: Martin Schulze + * Improved debug code to decode the numeric facility/priority + * pair into textual information. + * + * Tue Jun 10 12:35:10 MET DST 1997: Martin Schulze + * Corrected freeing of logfiles. Thanks to Jos Vos <jos@xos.nl> + * for reporting the bug and sending an idea to fix the problem. + * + * Tue Jun 10 12:51:41 MET DST 1997: Martin Schulze + * Removed sleep(10) from parent process. This has caused a slow + * startup in former times - and I don't see any reason for this. + * + * Sun Jun 15 16:23:29 MET DST 1997: Michael Alan Dorman + * Some more glibc patches made by <mdorman@debian.org>. + * + * Thu Jan 1 16:04:52 CET 1998: Martin Schulze <joey@infodrom.north.de + * Applied patch from Herbert Thielen <Herbert.Thielen@lpr.e-technik.tu-muenchen.de>. + * This included some balance parentheses for emacs and a bug in + * the exclamation mark handling. + * + * Fixed small bug which caused syslogd to write messages to the + * wrong logfile under some very rare conditions. Thanks to + * Herbert Xu <herbert@gondor.apana.org.au> for fiddling this out. + * + * Thu Jan 8 22:46:35 CET 1998: Martin Schulze <joey@infodrom.north.de> + * Reworked one line of the above patch as it prevented syslogd + * from binding the socket with the result that no messages were + * forwarded to other hosts. + * + * Sat Jan 10 01:33:06 CET 1998: Martin Schulze <joey@infodrom.north.de> + * Fixed small bugs in F_FORW_UNKN meachanism. Thanks to Torsten + * Neumann <torsten@londo.rhein-main.de> for pointing me to it. + * + * Mon Jan 12 19:50:58 CET 1998: Martin Schulze <joey@infodrom.north.de> + * Modified debug output concerning remote receiption. + * + * Mon Feb 23 23:32:35 CET 1998: Topi Miettinen <Topi.Miettinen@ml.tele.fi> + * Re-worked handling of Unix and UDP sockets to support closing / + * opening of them in order to have it open only if it is needed + * either for forwarding to a remote host or by receiption from + * the network. + * + * Wed Feb 25 10:54:09 CET 1998: Martin Schulze <joey@infodrom.north.de> + * Fixed little comparison mistake that prevented the MARK + * feature to work properly. + * + * Wed Feb 25 13:21:44 CET 1998: Martin Schulze <joey@infodrom.north.de> + * Corrected Topi's patch as it prevented forwarding during + * startup due to an unknown LogPort. + * + * Sat Oct 10 20:01:48 CEST 1998: Martin Schulze <joey@infodrom.north.de> + * Added support for TESTING define which will turn syslogd into + * stdio-mode used for debugging. + * + * Sun Oct 11 20:16:59 CEST 1998: Martin Schulze <joey@infodrom.north.de> + * Reworked the initialization/fork code. Now the parent + * process activates a signal handler which the daughter process + * will raise if it is initialized. Only after that one the + * parent process may exit. Otherwise klogd might try to flush + * its log cache while syslogd can't receive the messages yet. + * + * Mon Oct 12 13:30:35 CEST 1998: Martin Schulze <joey@infodrom.north.de> + * Redirected some error output with regard to argument parsing to + * stderr. + * + * Mon Oct 12 14:02:51 CEST 1998: Martin Schulze <joey@infodrom.north.de> + * Applied patch provided vom Topi Miettinen with regard to the + * people from OpenBSD. This provides the additional '-a' + * argument used for specifying additional UNIX domain sockets to + * listen to. This is been used with chroot()'ed named's for + * example. See for http://www.psionic.com/papers/dns.html + * + * Mon Oct 12 18:29:44 CEST 1998: Martin Schulze <joey@infodrom.north.de> + * Added `ftp' facility which was introduced in glibc version 2. + * It's #ifdef'ed so won't harm with older libraries. + * + * Mon Oct 12 19:59:21 MET DST 1998: Martin Schulze <joey@infodrom.north.de> + * Code cleanups with regard to bsd -> posix transition and + * stronger security (buffer length checking). Thanks to Topi + * Miettinen <tom@medialab.sonera.net> + * . index() --> strchr() + * . sprintf() --> snprintf() + * . bcopy() --> memcpy() + * . bzero() --> memset() + * . UNAMESZ --> UT_NAMESIZE + * . sys_errlist --> strerror() + * + * Mon Oct 12 20:22:59 CEST 1998: Martin Schulze <joey@infodrom.north.de> + * Added support for setutent()/getutent()/endutend() instead of + * binary reading the UTMP file. This is the the most portable + * way. This allows /var/run/utmp format to change, even to a + * real database or utmp daemon. Also if utmp file locking is + * implemented in libc, syslog will use it immediately. Thanks + * to Topi Miettinen <tom@medialab.sonera.net>. + * + * Mon Oct 12 20:49:18 MET DST 1998: Martin Schulze <joey@infodrom.north.de> + * Avoid logging of SIGCHLD when syslogd is in the process of + * exiting and closing its files. Again thanks to Topi. + * + * Mon Oct 12 22:18:34 CEST 1998: Martin Schulze <joey@infodrom.north.de> + * Modified printline() to support 8bit characters - such as + * russion letters. Thanks to Vladas Lapinskas <lapinskas@mail.iae.lt>. + * + * Sat Nov 14 02:29:37 CET 1998: Martin Schulze <joey@infodrom.north.de> + * ``-m 0'' now turns of MARK logging entirely. + * + * Tue Jan 19 01:04:18 MET 1999: Martin Schulze <joey@infodrom.north.de> + * Finally fixed an error with `-a' processing, thanks to Topi + * Miettinen <tom@medialab.sonera.net>. + * + * Sun May 23 10:08:53 CEST 1999: Martin Schulze <joey@infodrom.north.de> + * Removed superflous call to utmpname(). The path to the utmp + * file is defined in the used libc and should not be hardcoded + * into the syslogd binary referring the system it was compiled on. + * + * Sun Sep 17 20:45:33 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> + * Fixed some bugs in printline() code that did not escape + * control characters '\177' through '\237' and contained a + * single-byte buffer overflow. Thanks to Solar Designer + * <solar@false.com>. + * + * Sun Sep 17 21:26:16 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> + * Don't close open sockets upon reload. Thanks to Bill + * Nottingham. + * + * Mon Sep 18 09:10:47 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> + * Fixed bug in printchopped() that caused syslogd to emit + * kern.emerg messages when splitting long lines. Thanks to + * Daniel Jacobowitz <dan@debian.org> for the fix. + * + * Mon Sep 18 15:33:26 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> + * Removed unixm/unix domain sockets and switch to Datagram Unix + * Sockets. This should remove one possibility to play DoS with + * syslogd. Thanks to Olaf Kirch <okir@caldera.de> for the patch. + * + * Sun Mar 11 20:23:44 CET 2001: Martin Schulze <joey@infodrom.ffis.de> + * Don't return a closed fd if `-a' is called with a wrong path. + * Thanks to Bill Nottingham <notting@redhat.com> for providing + * a patch. + * + * The following copyright and license applies to the original + * sysklogd package that was used as a basis for this release of + * rsyslogd. Obviously, it applies to those parts stemming directly + * back to the original sysklogd package. + * + * Copyright (c) 1983, 1988 Regents of the University of California. + * All rights reserved. + * + * Redistribution and use in source and binary forms are permitted + * provided that the above copyright notice and this paragraph are + * duplicated in all such forms and that any documentation, + * advertising materials, and other materials related to such + * distribution and use acknowledge that the software was developed + * by the University of California, Berkeley. The name of the + * University may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ @@ -1,11 +1,684 @@ -# Copyright (C) 2004-2007 Rainer Gerhards and Adiscon GmbH -# this is no longer the real make file. To prevent install -# errors, it displays instructions on how to go to the -# right spot. -# For details, see http://www.rsyslog.com/doc - -default: - # ERROR: you need to switch to the distro-specific subdirectory and call make - # from there. If in doubt, use the linux subdirectory! - # for doc, see http://www.rsyslog.com/doc and look for the install howto! - # NO WORK HAS BEEN DONE by this make invokation. +# Makefile.in generated by automake 1.10 from Makefile.am. +# Makefile. Generated from Makefile.in by configure. + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + + + +pkgdatadir = $(datadir)/rsyslog +pkglibdir = $(libdir)/rsyslog +pkgincludedir = $(includedir)/rsyslog +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +bin_PROGRAMS = klogd$(EXEEXT) rfc3195d$(EXEEXT) syslogd$(EXEEXT) +subdir = . +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + compile depcomp install-sh missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" +binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) +PROGRAMS = $(bin_PROGRAMS) +am_klogd_OBJECTS = klogd.$(OBJEXT) syslog.$(OBJEXT) pidfile.$(OBJEXT) \ + ksym.$(OBJEXT) +klogd_OBJECTS = $(am_klogd_OBJECTS) +klogd_LDADD = $(LDADD) +am_rfc3195d_OBJECTS = rfc3195d.$(OBJEXT) +rfc3195d_OBJECTS = $(am_rfc3195d_OBJECTS) +rfc3195d_LDADD = $(LDADD) +am_syslogd_OBJECTS = syslogd-syslogd.$(OBJEXT) \ + syslogd-pidfile.$(OBJEXT) syslogd-template.$(OBJEXT) \ + syslogd-outchannel.$(OBJEXT) syslogd-stringbuf.$(OBJEXT) \ + syslogd-srUtils.$(OBJEXT) syslogd-parse.$(OBJEXT) +syslogd_OBJECTS = $(am_syslogd_OBJECTS) +am__DEPENDENCIES_1 = +syslogd_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) +DEFAULT_INCLUDES = -I. +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +SOURCES = $(klogd_SOURCES) $(rfc3195d_SOURCES) $(syslogd_SOURCES) +DIST_SOURCES = $(klogd_SOURCES) $(rfc3195d_SOURCES) $(syslogd_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = ${SHELL} /home/rger/proj/rsyslog/missing --run aclocal-1.10 +AMTAR = ${SHELL} /home/rger/proj/rsyslog/missing --run tar +AUTOCONF = ${SHELL} /home/rger/proj/rsyslog/missing --run autoconf +AUTOHEADER = ${SHELL} /home/rger/proj/rsyslog/missing --run autoheader +AUTOMAKE = ${SHELL} /home/rger/proj/rsyslog/missing --run automake-1.10 +AWK = gawk +CC = gcc +CCDEPMODE = depmode=gcc3 +CFLAGS = -g -O2 +CPP = gcc -E +CPPFLAGS = +CYGPATH_W = echo +DEFS = -DHAVE_CONFIG_H +DEPDIR = .deps +ECHO_C = +ECHO_N = -n +ECHO_T = +EGREP = /bin/grep -E +EXEEXT = +GREP = /bin/grep +INSTALL = /usr/bin/install -c +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_PROGRAM = ${INSTALL} +INSTALL_SCRIPT = ${INSTALL} +INSTALL_STRIP_PROGRAM = $(install_sh) -c -s +LDFLAGS = +LIBOBJS = +LIBS = +LTLIBOBJS = +MAKEINFO = ${SHELL} /home/rger/proj/rsyslog/missing --run makeinfo +MKDIR_P = /bin/mkdir -p +MYSQL_CONFIG = +OBJEXT = o +PACKAGE = rsyslog +PACKAGE_BUGREPORT = rsyslog@lists.adiscon.com. +PACKAGE_NAME = rsyslog +PACKAGE_STRING = rsyslog 1.16.0 +PACKAGE_TARNAME = rsyslog +PACKAGE_VERSION = 1.16.0 +PATH_SEPARATOR = : +SET_MAKE = +SHELL = /bin/sh +STRIP = +VERSION = 1.16.0 +abs_builddir = /home/rger/proj/rsyslog +abs_srcdir = /home/rger/proj/rsyslog +abs_top_builddir = /home/rger/proj/rsyslog +abs_top_srcdir = /home/rger/proj/rsyslog +ac_ct_CC = gcc +am__include = include +am__leading_dot = . +am__quote = +am__tar = ${AMTAR} chof - "$$tardir" +am__untar = ${AMTAR} xf - +bindir = ${exec_prefix}/bin +build_alias = +builddir = . +datadir = ${datarootdir} +datarootdir = ${prefix}/share +docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} +dvidir = ${docdir} +exec_prefix = ${prefix} +host_alias = +htmldir = ${docdir} +includedir = ${prefix}/include +infodir = ${datarootdir}/info +install_sh = $(SHELL) /home/rger/proj/rsyslog/install-sh +libdir = ${exec_prefix}/lib +libexecdir = ${exec_prefix}/libexec +localedir = ${datarootdir}/locale +localstatedir = ${prefix}/var +mandir = ${datarootdir}/man +mkdir_p = /bin/mkdir -p +mysql_includes = +mysql_libs = +oldincludedir = /usr/include +pdfdir = ${docdir} +prefix = /usr/local +program_transform_name = s,x,x, +psdir = ${docdir} +pthreads_libs = -lpthread +sbindir = ${exec_prefix}/sbin +sharedstatedir = ${prefix}/com +srcdir = . +sysconfdir = ${prefix}/etc +target_alias = +top_builddir = . +top_srcdir = . +zlib_libs = -lz +klogd_SOURCES = klogd.c syslog.c pidfile.c ksym.c +rfc3195d_SOURCES = rfc3195d.c +syslogd_SOURCES = syslogd.c pidfile.c template.c outchannel.c stringbuf.c srUtils.c parse.c +syslogd_CPPFLAGS = $(mysql_includes) +syslogd_LDADD = $(mysql_libs) $(zlib_libs) $(pthreads_libs) +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .o .obj +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ + cd $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ + $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ + rm -f "$(DESTDIR)$(bindir)/$$f"; \ + done + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) +klogd$(EXEEXT): $(klogd_OBJECTS) $(klogd_DEPENDENCIES) + @rm -f klogd$(EXEEXT) + $(LINK) $(klogd_OBJECTS) $(klogd_LDADD) $(LIBS) +rfc3195d$(EXEEXT): $(rfc3195d_OBJECTS) $(rfc3195d_DEPENDENCIES) + @rm -f rfc3195d$(EXEEXT) + $(LINK) $(rfc3195d_OBJECTS) $(rfc3195d_LDADD) $(LIBS) +syslogd$(EXEEXT): $(syslogd_OBJECTS) $(syslogd_DEPENDENCIES) + @rm -f syslogd$(EXEEXT) + $(LINK) $(syslogd_OBJECTS) $(syslogd_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +include ./$(DEPDIR)/klogd.Po +include ./$(DEPDIR)/ksym.Po +include ./$(DEPDIR)/pidfile.Po +include ./$(DEPDIR)/rfc3195d.Po +include ./$(DEPDIR)/syslog.Po +include ./$(DEPDIR)/syslogd-outchannel.Po +include ./$(DEPDIR)/syslogd-parse.Po +include ./$(DEPDIR)/syslogd-pidfile.Po +include ./$(DEPDIR)/syslogd-srUtils.Po +include ./$(DEPDIR)/syslogd-stringbuf.Po +include ./$(DEPDIR)/syslogd-syslogd.Po +include ./$(DEPDIR)/syslogd-template.Po + +.c.o: + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +# source='$<' object='$@' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(COMPILE) -c $< + +.c.obj: + $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` + mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +# source='$<' object='$@' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(COMPILE) -c `$(CYGPATH_W) '$<'` + +syslogd-syslogd.o: syslogd.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-syslogd.o -MD -MP -MF $(DEPDIR)/syslogd-syslogd.Tpo -c -o syslogd-syslogd.o `test -f 'syslogd.c' || echo '$(srcdir)/'`syslogd.c + mv -f $(DEPDIR)/syslogd-syslogd.Tpo $(DEPDIR)/syslogd-syslogd.Po +# source='syslogd.c' object='syslogd-syslogd.o' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-syslogd.o `test -f 'syslogd.c' || echo '$(srcdir)/'`syslogd.c + +syslogd-syslogd.obj: syslogd.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-syslogd.obj -MD -MP -MF $(DEPDIR)/syslogd-syslogd.Tpo -c -o syslogd-syslogd.obj `if test -f 'syslogd.c'; then $(CYGPATH_W) 'syslogd.c'; else $(CYGPATH_W) '$(srcdir)/syslogd.c'; fi` + mv -f $(DEPDIR)/syslogd-syslogd.Tpo $(DEPDIR)/syslogd-syslogd.Po +# source='syslogd.c' object='syslogd-syslogd.obj' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-syslogd.obj `if test -f 'syslogd.c'; then $(CYGPATH_W) 'syslogd.c'; else $(CYGPATH_W) '$(srcdir)/syslogd.c'; fi` + +syslogd-pidfile.o: pidfile.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-pidfile.o -MD -MP -MF $(DEPDIR)/syslogd-pidfile.Tpo -c -o syslogd-pidfile.o `test -f 'pidfile.c' || echo '$(srcdir)/'`pidfile.c + mv -f $(DEPDIR)/syslogd-pidfile.Tpo $(DEPDIR)/syslogd-pidfile.Po +# source='pidfile.c' object='syslogd-pidfile.o' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-pidfile.o `test -f 'pidfile.c' || echo '$(srcdir)/'`pidfile.c + +syslogd-pidfile.obj: pidfile.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-pidfile.obj -MD -MP -MF $(DEPDIR)/syslogd-pidfile.Tpo -c -o syslogd-pidfile.obj `if test -f 'pidfile.c'; then $(CYGPATH_W) 'pidfile.c'; else $(CYGPATH_W) '$(srcdir)/pidfile.c'; fi` + mv -f $(DEPDIR)/syslogd-pidfile.Tpo $(DEPDIR)/syslogd-pidfile.Po +# source='pidfile.c' object='syslogd-pidfile.obj' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-pidfile.obj `if test -f 'pidfile.c'; then $(CYGPATH_W) 'pidfile.c'; else $(CYGPATH_W) '$(srcdir)/pidfile.c'; fi` + +syslogd-template.o: template.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-template.o -MD -MP -MF $(DEPDIR)/syslogd-template.Tpo -c -o syslogd-template.o `test -f 'template.c' || echo '$(srcdir)/'`template.c + mv -f $(DEPDIR)/syslogd-template.Tpo $(DEPDIR)/syslogd-template.Po +# source='template.c' object='syslogd-template.o' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-template.o `test -f 'template.c' || echo '$(srcdir)/'`template.c + +syslogd-template.obj: template.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-template.obj -MD -MP -MF $(DEPDIR)/syslogd-template.Tpo -c -o syslogd-template.obj `if test -f 'template.c'; then $(CYGPATH_W) 'template.c'; else $(CYGPATH_W) '$(srcdir)/template.c'; fi` + mv -f $(DEPDIR)/syslogd-template.Tpo $(DEPDIR)/syslogd-template.Po +# source='template.c' object='syslogd-template.obj' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-template.obj `if test -f 'template.c'; then $(CYGPATH_W) 'template.c'; else $(CYGPATH_W) '$(srcdir)/template.c'; fi` + +syslogd-outchannel.o: outchannel.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-outchannel.o -MD -MP -MF $(DEPDIR)/syslogd-outchannel.Tpo -c -o syslogd-outchannel.o `test -f 'outchannel.c' || echo '$(srcdir)/'`outchannel.c + mv -f $(DEPDIR)/syslogd-outchannel.Tpo $(DEPDIR)/syslogd-outchannel.Po +# source='outchannel.c' object='syslogd-outchannel.o' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-outchannel.o `test -f 'outchannel.c' || echo '$(srcdir)/'`outchannel.c + +syslogd-outchannel.obj: outchannel.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-outchannel.obj -MD -MP -MF $(DEPDIR)/syslogd-outchannel.Tpo -c -o syslogd-outchannel.obj `if test -f 'outchannel.c'; then $(CYGPATH_W) 'outchannel.c'; else $(CYGPATH_W) '$(srcdir)/outchannel.c'; fi` + mv -f $(DEPDIR)/syslogd-outchannel.Tpo $(DEPDIR)/syslogd-outchannel.Po +# source='outchannel.c' object='syslogd-outchannel.obj' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-outchannel.obj `if test -f 'outchannel.c'; then $(CYGPATH_W) 'outchannel.c'; else $(CYGPATH_W) '$(srcdir)/outchannel.c'; fi` + +syslogd-stringbuf.o: stringbuf.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-stringbuf.o -MD -MP -MF $(DEPDIR)/syslogd-stringbuf.Tpo -c -o syslogd-stringbuf.o `test -f 'stringbuf.c' || echo '$(srcdir)/'`stringbuf.c + mv -f $(DEPDIR)/syslogd-stringbuf.Tpo $(DEPDIR)/syslogd-stringbuf.Po +# source='stringbuf.c' object='syslogd-stringbuf.o' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-stringbuf.o `test -f 'stringbuf.c' || echo '$(srcdir)/'`stringbuf.c + +syslogd-stringbuf.obj: stringbuf.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-stringbuf.obj -MD -MP -MF $(DEPDIR)/syslogd-stringbuf.Tpo -c -o syslogd-stringbuf.obj `if test -f 'stringbuf.c'; then $(CYGPATH_W) 'stringbuf.c'; else $(CYGPATH_W) '$(srcdir)/stringbuf.c'; fi` + mv -f $(DEPDIR)/syslogd-stringbuf.Tpo $(DEPDIR)/syslogd-stringbuf.Po +# source='stringbuf.c' object='syslogd-stringbuf.obj' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-stringbuf.obj `if test -f 'stringbuf.c'; then $(CYGPATH_W) 'stringbuf.c'; else $(CYGPATH_W) '$(srcdir)/stringbuf.c'; fi` + +syslogd-srUtils.o: srUtils.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-srUtils.o -MD -MP -MF $(DEPDIR)/syslogd-srUtils.Tpo -c -o syslogd-srUtils.o `test -f 'srUtils.c' || echo '$(srcdir)/'`srUtils.c + mv -f $(DEPDIR)/syslogd-srUtils.Tpo $(DEPDIR)/syslogd-srUtils.Po +# source='srUtils.c' object='syslogd-srUtils.o' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-srUtils.o `test -f 'srUtils.c' || echo '$(srcdir)/'`srUtils.c + +syslogd-srUtils.obj: srUtils.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-srUtils.obj -MD -MP -MF $(DEPDIR)/syslogd-srUtils.Tpo -c -o syslogd-srUtils.obj `if test -f 'srUtils.c'; then $(CYGPATH_W) 'srUtils.c'; else $(CYGPATH_W) '$(srcdir)/srUtils.c'; fi` + mv -f $(DEPDIR)/syslogd-srUtils.Tpo $(DEPDIR)/syslogd-srUtils.Po +# source='srUtils.c' object='syslogd-srUtils.obj' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-srUtils.obj `if test -f 'srUtils.c'; then $(CYGPATH_W) 'srUtils.c'; else $(CYGPATH_W) '$(srcdir)/srUtils.c'; fi` + +syslogd-parse.o: parse.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-parse.o -MD -MP -MF $(DEPDIR)/syslogd-parse.Tpo -c -o syslogd-parse.o `test -f 'parse.c' || echo '$(srcdir)/'`parse.c + mv -f $(DEPDIR)/syslogd-parse.Tpo $(DEPDIR)/syslogd-parse.Po +# source='parse.c' object='syslogd-parse.o' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-parse.o `test -f 'parse.c' || echo '$(srcdir)/'`parse.c + +syslogd-parse.obj: parse.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT syslogd-parse.obj -MD -MP -MF $(DEPDIR)/syslogd-parse.Tpo -c -o syslogd-parse.obj `if test -f 'parse.c'; then $(CYGPATH_W) 'parse.c'; else $(CYGPATH_W) '$(srcdir)/parse.c'; fi` + mv -f $(DEPDIR)/syslogd-parse.Tpo $(DEPDIR)/syslogd-parse.Po +# source='parse.c' object='syslogd-parse.obj' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(syslogd_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o syslogd-parse.obj `if test -f 'parse.c'; then $(CYGPATH_W) 'parse.c'; else $(CYGPATH_W) '$(srcdir)/parse.c'; fi` + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d $(distdir) || mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) config.h +installdirs: + for dir in "$(DESTDIR)$(bindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-info: install-info-am + +install-man: + +install-pdf: install-pdf-am + +install-ps: install-ps-am + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \ + clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \ + dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \ + distclean-compile distclean-generic distclean-hdr \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ + install-binPROGRAMS install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-binPROGRAMS + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 00000000..ba0f70e3 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,11 @@ + +bin_PROGRAMS=klogd rfc3195d syslogd + +klogd_SOURCES=klogd.c syslog.c pidfile.c ksym.c + +rfc3195d_SOURCES=rfc3195d.c + +syslogd_SOURCES=syslogd.c pidfile.c template.c outchannel.c stringbuf.c srUtils.c parse.c +syslogd_CPPFLAGS=$(mysql_includes) +syslogd_LDADD=$(mysql_libs) $(zlib_libs) $(pthreads_libs) + @@ -1,953 +1 @@ ---------------------------------------------------------------------------- -Version 1.15.1 (RGer), 2007-07-10 -- fixed a bug that caused a dynaFile selector to stall when there was - an open error with one file -- improved template processing for dynaFiles; templates are now only - looked up during initialization - speeds up processing -- optimized memory layout in struct filed when compiled with MySQL - support -- fixed a bug that caused compilation without SYSLOG_INET to fail -- re-enabled the "last message repeated n times" feature. This - feature was not taken care of while rsyslogd evolved from sysklogd - and it was more or less defunct. Now it is fully functional again. -- added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE -- fixed a bug in iovAsString() that caused a memory leak under stress - conditions (most probably memory shortage). This was unlikely to - ever happen, but it doesn't hurt doing it right -- cosmetic: defined type "uchar", change all unsigned chars to uchar ---------------------------------------------------------------------------- -Version 1.15.0 (RGer), 2007-07-05 -- added ability to dynamically generate file names based on templates - and thus properties. This was a much-requested feature. It makes - life easy when it e.g. comes to splitting files based on the sender - address. -- added $umask and $FileCreateMode config file directives -- applied a patch from Bartosz Kuzma to compile cleanly under NetBSD -- checks for extra (unexpected) characters in system config file lines - have been added -- added IPv6 documentation - was accidently missing from CVS -- begun to change char to unsigned char ---------------------------------------------------------------------------- -Version 1.14.2 (RGer), 2007-07-03 -** this release fixes all known nits with IPv6 ** -- restored capability to do /etc/service lookup for "syslog" - service when -r 0 was given -- documented IPv6 handling of syslog messages -- integrate patch from Bartosz Kuźma to make rsyslog compile under - Solaris again (the patch replaced a strndup() call, which is not - available under Solaris -- improved debug logging when waiting on select -- updated rsyslogd man page with new options (-46A) ---------------------------------------------------------------------------- -Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29 -- added Peter Vrabec's patch for IPv6 TCP -- prefixed all messages send to stderr in rsyslogd with "rsyslogd: " ---------------------------------------------------------------------------- -Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28 -- Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled - IPv6 Support is currently for UDP only, TCP is to come soon. - AllowedSender configuration does not yet work for IPv6. -- fixed code in iovCreate() that broke C's strict aliasing rules -- fixed some char/unsigned char differences that forced the compiler - to spit out warning messages -- updated the Red Hat init script to fix a known issue (thanks to - Peter Vrabec) ---------------------------------------------------------------------------- -Version 1.13.5 (RGer), 2007-06-22 -- made the TCP session limit configurable via command line switch - now -t <port>,<max sessions> -- added man page for rklogd(8) (basically a copy from klogd, but now - there is one...) -- fixed a bug that caused internal messages (e.g. rsyslogd startup) to - appear without a tag. -- removed a minor memory leak that occurred when TAG processing requalified - a HOSTNAME to be a TAG (and a TAG already was set). -- removed potential small memory leaks in MsgSet***() functions. There - would be a leak if a property was re-set, something that happened - extremely seldom. ---------------------------------------------------------------------------- -Version 1.13.4 (RGer), 2007-06-18 -- added a new property "PRI-text", which holds the PRI field in - textual form (e.g. "syslog.info") -- added alias "syslogseverity" for "syslogpriority", which is a - misleading property name that needs to stay for historical - reasons (and backward-compatility) -- added doc on how to record PRI value in log file -- enhanced signal handling in klogd, including removal of an unsafe - call to the logging system during signal handling ---------------------------------------------------------------------------- -Version 1.13.3 (RGer), 2007-06-15 -- create a version of syslog.c from scratch. This is now - - highly optimized for rsyslog - - removes an incompatible license problem as the original - version had a BSD license with advertising clause - - fixed in the regard that rklogd will continue to work when - rsysogd has been restarted (the original version, as well - as sysklogd, will remain silent then) - - solved an issue with an extra NUL char at message end that the - original version had -- applied some changes to klogd to care for the new interface -- fixed a bug in syslogd.c which prevented compiling under debian ---------------------------------------------------------------------------- -Version 1.13.2 (RGer), 2007-06-13 -- lib order in makefile patched to facilitate static linking - thanks - to Bennett Todd for providing the patch -- Integrated a patch from Peter Vrabec (pvrabec@redheat.com): - - added klogd under the name of rklogd (remove dependency on - original sysklogd package - - createDB.sql now in UTF - - added additional config files for use on Red Hat ---------------------------------------------------------------------------- -Version 1.13.1 (RGer), 2007-02-05 -- changed the listen backlog limit to a more reasonable value based on - the maximum number of TCP connections configurd (10% + 5) - thanks to Guy - Standen for the hint (actually, the limit was 5 and that was a - left-over from early testing). -- fixed a bug in makefile which caused DB-support to be disabled when - NETZIP support was enabled -- added the -e option to allow transmission of every message to remote - hosts (effectively turns off duplicate message suppression) -- (somewhat) improved memory consumption when compiled with MySQL support -- looks like we fixed an incompatibility with MySQL 5.x and above software - At least in one case, the remote server name was destroyed, leading to - a connection failure. The new, improved code does not have this issue and - so we see this as solved (the new code is generally somewhat better, so - there is a good chance we fixed this incompatibility). ---------------------------------------------------------------------------- -Version 1.13.0 (RGer), 2006-12-19 -- added '$' as ToPos proptery replacer specifier - means "up to the - end of the string" -- property replacer option "escape-cc", "drop-cc" and "space-cc" added -- changed the handling of \0 characters inside syslog messages. We now - consistently escape them to "#000". This is somewhat recommended in - the draft-ietf-syslog-protocol-19 draft. While the real recomendation - is to not escape any characters at all, we can not do this without - considerable modification of the code. So we escape it to "#000", which - is consistent with a sample found in the Internet-draft. -- removed message glue logic (see printchopped() comment for details) - Also caused removal of parts table and thus some improvements in - memory usage. -- changed the default MAXLINE to 2048 to take care of recent syslog - standardization efforts (can easily be changed in syslogd.c) -- added support for byte-counted TCP syslog messages (much like - syslog-transport-tls-05 Internet Draft). This was necessary to - support compression over TCP. -- added support for receiving compressed syslog messages -- added support for sending compressed syslog messages -- fixed a bug where the last message in a syslog/tcp stream was - lost if it was not properly terminated by a LF character ---------------------------------------------------------------------------- -Version 1.12.3 (RGer), 2006-10-04 -- implemented some changes to support Solaris (but support is not - yet complete) -- commented out (via #if 0) some methods that are currently not being use - but should be kept for further us -- added (interim) -u 1 option to turn off hostname and tag parsing -- done some modifications to better support Fedora -- made the field delimiter inside property replace configurable via - template -- fixed a bug in property replacer: if fields were used, the delimitor - became part of the field. Up until now, this was barely noticable as - the delimiter as TAB only and thus invisible to a human. With other - delimiters available now, it quickly showed up. This bug fix might cause - some grief to existing installations if they used the extra TAB for - whatever reasons - sorry folks... Anyhow, a solution is easy: just add - a TAB character contstant into your template. Thus, there has no attempt - been made to do this in a backwards-compatible way. ---------------------------------------------------------------------------- -Version 1.12.2 (RGer), 2006-02-15 -- fixed a bug in the RFC 3339 date formatter. An extra space was added - after the actual timestamp -- added support for providing high-precision RFC3339 timestamps for - (rsyslogd-)internally-generated messages -- very (!) experimental support for syslog-protocol internet draft - added (the draft is experimental, the code is solid ;)) -- added support for field-extracting in the property replacer -- enhanced the legacy-syslog parser so that it can interpret messages - that do not contain a TIMESTAMP -- fixed a bug that caused the default socket (usually /dev/log) to be - opened even when -o command line option was given -- fixed a bug in the Debian sample startup script - it caused rsyslogd - to listen to remote requests, which it shouldn't by default ---------------------------------------------------------------------------- -Version 1.12.1 (RGer), 2005-11-23 -- made multithreading work with BSD. Some signal-handling needed to be - restructured. Also, there might be a slight delay of up to 10 seconds - when huping and terminating rsyslogd under BSD -- fixed a bug where a NULL-pointer was passed to printf() in logmsg(). -- fixed a bug during "make install" where rc3195d was not installed - Thanks to Bennett Todd for spotting this. -- fixed a bug where rsyslogd dumped core when no TAG was found in the - received message -- enhanced message parser so that it can deal with missing hostnames - in many cases (may not be totally fail-safe) -- fixed a bug where internally-generated messages did not have the correct - TAG ---------------------------------------------------------------------------- -Version 1.12.0 (RGer), 2005-10-26 -- moved to a multi-threaded design. single-threading is still optionally - available. Multi-threading is experimental! -- fixed a potential race condition. In the original code, marking was done - by an alarm handler, which could lead to all sorts of bad things. This - has been changed now. See comments in syslogd.c/domark() for details. -- improved debug output for property-based filters -- not a code change, but: I have checked all exit()s to make sure that - none occurs once rsyslogd has started up. Even in unusual conditions - (like low-memory conditions) rsyslogd somehow remains active. Of course, - it might loose a message or two, but at least it does not abort and it - can also recover when the condition no longer persists. -- fixed a bug that could cause loss of the last message received - immediately before rsyslogd was terminated. -- added comments on thread-safety of global variables in syslogd.c -- fixed a small bug: spurios printf() when TCP syslog was used -- fixed a bug that causes rsyslogd to dump core on termination when one - of the selector lines did not receive a message during the run (very - unlikely) -- fixed an one-too-low memory allocation in the TCP sender. Could result - in rsyslogd dumping core. -- fixed a bug with regular expression support (thanks to Andres Riancho) -- a little bit of code restructuring (especially main(), which was - horribly large) ---------------------------------------------------------------------------- -Version 1.11.1 (RGer), 2005-10-19 -- support for BSD-style program name and host blocks -- added a new property "programname" that can be used in templates -- added ability to specify listen port for rfc3195d -- fixed a bug that rendered the "startswith" comparison operation - unusable. -- changed more functions to "static" storage class to help compiler - optimize (should have been static in the first place...) -- fixed a potential memory leak in the string buffer class destructor. - As the destructur was previously never called, the leak did not actually - appear. -- some internal restructuring in anticipation/preparation of minimal - multi-threading support -- rsyslogd still shares some code with the sysklogd project. Some patches - for this shared code have been brought over from the sysklogd CVS. ---------------------------------------------------------------------------- -Version 1.11.0 (RGer), 2005-10-12 -- support for receiving messages via RFC 3195; added rfc3195d for that - purpose -- added an additional guard to prevent rsyslogd from aborting when the - 2gb file size limit is hit. While a user can configure rsyslogd to - handle such situations, it would abort if that was not done AND large - file support was not enabled (ok, this is hopefully an unlikely scenario) -- fixed a bug that caused additional Unix domain sockets to be incorrectly - processed - could lead to message loss in extreme cases ---------------------------------------------------------------------------- -Version 1.10.2 (RGer), 2005-09-27 -- added comparison operations in property-based filters: - * isequal - * startswith -- added ability to negate all property-based filter comparison operations - by adding a !-sign right in front of the operation name -- added the ability to specify remote senders for UDP and TCP - received messages. Allows to block all but well-known hosts -- changed the $-config line directives to be case-INsensitive -- new command line option -w added: "do not display warnings if messages - from disallowed senders are received" -- fixed a bug that caused rsyslogd to dump core when the compare value - was not quoted in property-based filters -- fixed a bug in the new CStr compare function which lead to invalid - results (fortunately, this function was not yet used widely) -- added better support for "debugging" rsyslog.conf property filters - (only if -d switch is given) -- changed some function definitions to static, which eventually enables - some compiler optimizations -- fixed a bug in MySQL code; when a SQL error occured, rsyslogd could - run in a tight loop. This was due to invalid sequence of error reporting - and is now fixed. ---------------------------------------------------------------------------- -Version 1.10.1 (RGer), 2005-09-23 -- added the ability to execute a shell script as an action. - Thanks to Bjoern Kalkbrenner for providing the code! -- fixed a bug in the MySQL code; due to the bug the automatic one-time - retry after an error did not happen - this lead to error message in - cases where none should be seen (e.g. after a MySQL restart) -- fixed a security issue with SQL-escaping in conjunction with - non-(SQL-)standard MySQL features. ---------------------------------------------------------------------------- -Version 1.10.0 (RGer), 2005-09-20 - REMINDER: 1.10 is the first unstable version if the 1.x series! -- added the capability to filter on any property in selector lines - (not just facility and priority) -- changed stringbuf into a new counted string class -- added support for a "discard" action. If a selector line with - discard (~ character) is found, no selector lines *after* that - line will be processed. -- thanks to Andres Riancho, regular expression support has been - added to the template engine -- added the FROMHOST property in the template processor, which could - previously not be obtained. Thanks to Cristian Testa for pointing - this out and even providing a fix. -- added display of compile-time options to -v output -- performance improvement for production build - made some checks - to happen only during debug mode -- fixed a problem with compiling on SUSE and - while doing so - removed - the socket call to set SO_BSDCOMPAT in cases where it is obsolete. ---------------------------------------------------------------------------- -Version 1.0.4 (RGer), 2006-02-01 -- a small but important fix: the tcp receiver had two forgotten printf's - in it that caused a lot of unnecessary output to stdout. This was - important enough to justify a new release ---------------------------------------------------------------------------- -Version 1.0.3 (RGer), 2005-11-14 -- added an additional guard to prevent rsyslogd from aborting when the - 2gb file size limit is hit. While a user can configure rsyslogd to - handle such situations, it would abort if that was not done AND large - file support was not enabled (ok, this is hopefully an unlikely scenario) -- fixed a bug that caused additional Unix domain sockets to be incorrectly - processed - could lead to message loss in extreme cases -- applied some patches available from the sysklogd project to code - shared from there -- fixed a bug that causes rsyslogd to dump core on termination when one - of the selector lines did not receive a message during the run (very - unlikely) -- fixed an one-too-low memory allocation in the TCP sender. Could result - in rsyslogd dumping core. -- fixed a bug in the TCP sender that caused the retry logic to fail - after an error or receiver overrun -- fixed a bug in init() that could lead to dumping core -- fixed a bug that could lead to dumping core when no HOSTNAME or no TAG - was present in the syslog message ---------------------------------------------------------------------------- -Version 1.0.2 (RGer), 2005-10-05 -- fixed an issue with MySQL error reporting. When an error occured, - the MySQL driver went into an endless loop (at least in most cases). ---------------------------------------------------------------------------- -Version 1.0.1 (RGer), 2005-09-23 -- fixed a security issue with SQL-escaping in conjunction with - non-(SQL-)standard MySQL features. ---------------------------------------------------------------------------- -Version 1.0.0 (RGer), 2005-09-12 -- changed install doc to cover daily cron scripts - a trouble source -- added rc script for slackware (provided by Chris Elvidge - thanks!) -- fixed a really minor bug in usage() - the -r option was still - reported as without the port parameter ---------------------------------------------------------------------------- -Version 0.9.8 (RGer), 2005-09-05 -- made startup and shutdown message more consistent and included the - pid, so that they can be easier correlated. Used syslog-protocol - structured data format for this purpose. -- improved config info in startup message, now tells not only - if it is listening remote on udp, but also for tcp. Also includes - the port numbers. The previous startup message was misleading, because - it did not say "remote reception" if rsyslogd was only listening via - tcp (but not via udp). -- added a "how can you help" document to the doc set ---------------------------------------------------------------------------- -Version 0.9.7 (RGer), 2005-08-15 -- some of the previous doc files (like INSTALL) did not properly - reflect the changes to the build process and the new doc. Fixed - that. -- changed syslogd.c so that when compiled without database support, - an error message is displayed when a database action is detected - in the config file (previously this was used as an user rule ;)) -- fixed a bug in the os-specific Makefiles which caused MySQL - support to not be compiled, even if selected ---------------------------------------------------------------------------- -Version 0.9.6 (RGer), 2005-08-09 -- greatly enhanced documentation. Now available in html format in - the "doc" folder and FreeBSD. Finally includes an install howto. -- improved MySQL error messages a little - they now show up as log - messages, too (formerly only in debug mode) -- added the ability to specify the listen port for udp syslog. - WARNING: This introduces an incompatibility. Formerly, udp - syslog was enabled by the -r command line option. Now, it is - "-r [port]", which is consistent with the tcp listener. However, - just -r will now return an error message. -- added sample startup scripts for Debian and FreeBSD -- added support for easy feature selection in the makefile. Un- - fortunately, this also means I needed to spilt the make file - for different OS and distros. There are some really bad syntax - differences between FreeBSD and Linux make. ---------------------------------------------------------------------------- -Version 0.9.5 (RGer), 2005-08-01 -- the "semicolon bug" was actually not (fully) solved in 0.9.4. One - part of the bug was solved, but another still existed. This one - is fixed now, too. -- the "semicolon bug" actually turned out to be a more generic bug. - It appeared whenever an invalid template name was given. With some - selector actions, rsyslogd dumped core, with other it "just" had - a small ressource leak with others all worked well. These anomalies - are now fixed. Note that they only appeared during system initaliziation - once the system was running, nothing bad happened. -- improved error reporting for template errors on startup. They are now - shown on the console and the start-up tty. Formerly, they were only - visible in debug mode. -- support for multiple instances of rsyslogd on a single machine added -- added new option "-o" --> omit local unix domain socket. This option - enables rsyslogd NOT to listen to the local socket. This is most - helpful when multiple instances of rsyslogd (or rsyslogd and another - syslogd) shall run on a single system. -- added new option "-i <pidfile>" which allows to specify the pidfile. - This is needed when multiple instances of rsyslogd are to be run. -- the new project home page is now online at www.rsyslog.com ---------------------------------------------------------------------------- -Version 0.9.4 (RGer), 2005-07-25 -- finally added the TCP sender. It now supports non-blocking mode, no - longer disabling message reception during connect. As it is now, it - is usable in production. The code could be more sophisticated, but - I've kept it short in anticipation of the move to liblogging, which - will lead to the removal of the code just written ;) -- the "exiting on signal..." message still had the "syslogd" name in - it. Changed this to "rsyslogd", as we do not have a large user base - yet, this should pose no problem. -- fixed "the semiconlon" bug. rsyslogd dumped core if a write-db action - was specified but no semicolon was given after the password (an empty - template was ok, but the semicolon needed to be present). -- changed a default for traditional output format. During testing, it - was seen that the timestamp written to file in default format was - the time of message reception, not the time specified in the TIMESTAMP - field of the message itself. Traditionally, the message TIMESTAMP is - used and this has been changed now. ---------------------------------------------------------------------------- -Version 0.9.3 (RGer), 2005-07-19 -- fixed a bug in the message parser. In June, the RFC 3164 timestamp - was not correctly parsed (yes, only in June and some other months, - see the code comment to learn why...) -- added the ability to specify the destination port when forwarding - syslog messages (both for TCP and UDP) -- added an very experimental TCP sender (activated by - @@machine:port in config). This is not yet for production use. If - the receiver is not alive, rsyslogd will wait quite some time until - the connection request times out, which most probably leads to - loss of incoming messages. - ---------------------------------------------------------------------------- -Version 0.9.2 (RGer), around 2005-07-06 -- I intended to change the maxsupported message size to 32k to - support IHE - but given the memory inefficiency in the usual use - cases, I have not done this. I have, however, included very - specific instructions on how to do this in the source code. I have - also done some testing with 32k messages, so you can change the - max size without taking too much risk. -- added a syslog/tcp receiver; we now can receive messages via - plain tcp, but we can still send only via UDP. The syslog/tcp - receiver is the primary enhancement of this release. -- slightly changed some error messages that contained a spurios \n at - the end of the line (which gives empty lines in your log...) - ---------------------------------------------------------------------------- -Version 0.9.1 (RGer) -- fixed code so that it compiles without errors under FreeBSD -- removed now unused function "allocate_log()" from syslogd.c -- changed the make file so that it contains more defines for - different environments (in the long term, we need a better - system for disabling/enabling features...) -- changed some printf's printing off_t types to %lld and - explicit (long long) casts. I tried to figure out the exact type, - but did not succeed in this. In the worst case, ultra-large peta- - byte files will now display funny informational messages on rollover, - something I think we can live with for the next 10 years or so... - ---------------------------------------------------------------------------- -Version 0.9.0 (RGer) -- changed the filed structure to be a linked list. Previously, it - was a table - well, for non-SYSV it was defined as linked list, - but from what I see that code did no longer work after my - modifications. I am now using a linked list in general because - that is needed for other upcoming modifications. -- fixed a bug that caused rsyslogd not to listen to anything if - the configuration file could not be read -- pervious versions disabled network logging (send/receive) if - syslog/udp port was not in /etc/services. Now defaulting to - port 514 in this case. -- internal error messages are now supported up to 256 bytes -- error message seen during config file read are now also displayed - to the attached tty and not only the console -- changed some error messages during init to be sent to the console - and/or emergency log. Previously, they were only seen if the - -d (debug) option was present on the command line. -- fixed the "2gb file issue on 32bit systems". If a file grew to - more than 2gb, the syslogd was aborted with "file size exceeded". - Now, defines have been added according to - http://www.daimi.au.dk/~kasperd/comp.os.linux.development.faq.html#LARGEFILE - Testing revealed that they work ;) - HOWEVER, if your file system, glibc, kernel, whatever does not - support files larger 2gb, you need to set a file size limit with - the new output channel mechanism. -- updated man pages to reflect the changes - ---------------------------------------------------------------------------- -Version 0.8.4 - -- improved -d debug output (removed developer-only content) -- now compiles under FreeBSD and NetBSD (only quick testing done on NetBSD) ---------------------------------------------------------------------------- -Version 0.8.3 - -- security model in "make install" changed -- minor doc updates ---------------------------------------------------------------------------- -Version 0.8.2 - -- added man page for rsyslog.conf and rsyslogd -- gave up on the concept of rsyslog being a "drop in" replacement - for syslogd. Now, the user installs rsyslogd and also needs to - adjust his system settings to this specifically. This also lead - to these changes: - * changed Makefile so that install now installs rsyslogd instead - of dealing with syslogd - * changed the default config file name to rsyslog.conf ---------------------------------------------------------------------------- -Version 0.8.1 - -- fixed a nasty memory leak (probably not the last one with this release) -- some enhancements to Makefile as suggested by Bennett Todd -- syslogd-internal messages (like restart) were missing the hostname - this has been corrected ---------------------------------------------------------------------------- -Version 0.8.0 - -Initial testing release. Based on the sysklogd package. Thanks to the -sysklogd maintainers for all their good work! ---------------------------------------------------------------------------- - ----------------------------------------------------------------------- -The following comments are from the stock syslogd.c source. They provide -some insight into what happened to the source before we forked -rsyslogd. However, much of the code already has been replaced and more -is to be replaced. So over time, these comments become less valuable. -I have moved them out of the syslogd.c file to shrink it, especially -as a lot of them do no longer apply. For historical reasons and -understanding of how the daemon evolved, they are probably still -helpful. ----------------------------------------------------------------------- -/* - * syslogd -- log system messages - * - * This program implements a system log. It takes a series of lines. - * Each line may have a priority, signified as "<n>" as - * the first characters of the line. If this is - * not present, a default priority is used. - * - * To kill syslogd, send a signal 15 (terminate). A signal 1 (hup) will - * cause it to reread its configuration file. - * - * Defined Constants: - * - * MAXLINE -- the maximum line length that can be handled. - * DEFUPRI -- the default priority for user messages - * DEFSPRI -- the default priority for kernel messages - * - * Author: Eric Allman - * extensive changes by Ralph Campbell - * more extensive changes by Eric Allman (again) - * - * Steve Lord: Fix UNIX domain socket code, added linux kernel logging - * change defines to - * SYSLOG_INET - listen on a UDP socket - * SYSLOG_UNIXAF - listen on unix domain socket - * SYSLOG_KERNEL - listen to linux kernel - * - * Mon Feb 22 09:55:42 CST 1993: Dr. Wettstein - * Additional modifications to the source. Changed priority scheme - * to increase the level of configurability. In its stock configuration - * syslogd no longer logs all messages of a certain priority and above - * to a log file. The * wildcard is supported to specify all priorities. - * Note that this is a departure from the BSD standard. - * - * Syslogd will now listen to both the inetd and the unixd socket. The - * strategy is to allow all local programs to direct their output to - * syslogd through the unixd socket while the program listens to the - * inetd socket to get messages forwarded from other hosts. - * - * Fri Mar 12 16:55:33 CST 1993: Dr. Wettstein - * Thanks to Stephen Tweedie (dcs.ed.ac.uk!sct) for helpful bug-fixes - * and an enlightened commentary on the prioritization problem. - * - * Changed the priority scheme so that the default behavior mimics the - * standard BSD. In this scenario all messages of a specified priority - * and above are logged. - * - * Add the ability to specify a wildcard (=) as the first character - * of the priority name. Doing this specifies that ONLY messages with - * this level of priority are to be logged. For example: - * - * *.=debug /usr/adm/debug - * - * Would log only messages with a priority of debug to the /usr/adm/debug - * file. - * - * Providing an * as the priority specifies that all messages are to be - * logged. Note that this case is degenerate with specifying a priority - * level of debug. The wildcard * was retained because I believe that - * this is more intuitive. - * - * Thu Jun 24 11:34:13 CDT 1993: Dr. Wettstein - * Modified sources to incorporate changes in libc4.4. Messages from - * syslog are now null-terminated, syslogd code now parses messages - * based on this termination scheme. Linux as of libc4.4 supports the - * fsync system call. Modified code to fsync after all writes to - * log files. - * - * Sat Dec 11 11:59:43 CST 1993: Dr. Wettstein - * Extensive changes to the source code to allow compilation with no - * complaints with -Wall. - * - * Reorganized the facility and priority name arrays so that they - * compatible with the syslog.h source found in /usr/include/syslog.h. - * NOTE that this should really be changed. The reason I do not - * allow the use of the values defined in syslog.h is on account of - * the extensions made to allow the wildcard character in the - * priority field. To fix this properly one should malloc an array, - * copy the contents of the array defined by syslog.h and then - * make whatever modifications that are desired. Next round. - * - * Thu Jan 6 12:07:36 CST 1994: Dr. Wettstein - * Added support for proper decomposition and re-assembly of - * fragment messages on UNIX domain sockets. Lack of this capability - * was causing 'partial' messages to be output. Since facility and - * priority information is encoded as a leader on the messages this - * was causing lines to be placed in erroneous files. - * - * Also added a patch from Shane Alderton (shane@ion.apana.org.au) to - * correct a problem with syslogd dumping core when an attempt was made - * to write log messages to a logged-on user. Thank you. - * - * Many thanks to Juha Virtanen (jiivee@hut.fi) for a series of - * interchanges which lead to the fixing of problems with messages set - * to priorities of none and emerg. Also thanks to Juha for a patch - * to exclude users with a class of LOGIN from receiving messages. - * - * Shane Alderton provided an additional patch to fix zombies which - * were conceived when messages were written to multiple users. - * - * Mon Feb 6 09:57:10 CST 1995: Dr. Wettstein - * Patch to properly reset the single priority message flag. Thanks - * to Christopher Gori for spotting this bug and forwarding a patch. - * - * Wed Feb 22 15:38:31 CST 1995: Dr. Wettstein - * Added version information to startup messages. - * - * Added defines so that paths to important files are taken from - * the definitions in paths.h. Hopefully this will insure that - * everything follows the FSSTND standards. Thanks to Chris Metcalf - * for a set of patches to provide this functionality. Also thanks - * Elias Levy for prompting me to get these into the sources. - * - * Wed Jul 26 18:57:23 MET DST 1995: Martin Schulze - * Linux' gethostname only returns the hostname and not the fqdn as - * expected in the code. But if you call hostname with an fqdn then - * gethostname will return an fqdn, so we have to mention that. This - * has been changed. - * - * The 'LocalDomain' and the hostname of a remote machine is - * converted to lower case, because the original caused some - * inconsistency, because the (at least my) nameserver did respond an - * fqdn containing of upper- _and_ lowercase letters while - * 'LocalDomain' consisted only of lowercase letters and that didn't - * match. - * - * Sat Aug 5 18:59:15 MET DST 1995: Martin Schulze - * Now no messages that were received from any remote host are sent - * out to another. At my domain this missing feature caused ugly - * syslog-loops, sometimes. - * - * Remember that no message is sent out. I can't figure out any - * scenario where it might be useful to change this behavior and to - * send out messages to other hosts than the one from which we - * received the message, but I might be shortsighted. :-/ - * - * Thu Aug 10 19:01:08 MET DST 1995: Martin Schulze - * Added my pidfile.[ch] to it to perform a better handling with - * pidfiles. Now both, syslogd and klogd, can only be started - * once. They check the pidfile. - * - * Sun Aug 13 19:01:41 MET DST 1995: Martin Schulze - * Add an addition to syslog.conf's interpretation. If a priority - * begins with an exclamation mark ('!') the normal interpretation - * of the priority is inverted: ".!*" is the same as ".none", ".!=info" - * don't logs the info priority, ".!crit" won't log any message with - * the priority crit or higher. For example: - * - * mail.*;mail.!=info /usr/adm/mail - * - * Would log all messages of the facility mail except those with - * the priority info to /usr/adm/mail. This makes the syslogd - * much more flexible. - * - * Defined TABLE_ALLPRI=255 and changed some occurrences. - * - * Sat Aug 19 21:40:13 MET DST 1995: Martin Schulze - * Making the table of facilities and priorities while in debug - * mode more readable. - * - * If debugging is turned on, printing the whole table of - * facilities and priorities every hexadecimal or 'X' entry is - * now 2 characters wide. - * - * The number of the entry is prepended to each line of - * facilities and priorities, and F_UNUSED lines are not shown - * anymore. - * - * Corrected some #ifdef SYSV's. - * - * Mon Aug 21 22:10:35 MET DST 1995: Martin Schulze - * Corrected a strange behavior during parsing of configuration - * file. The original BSD syslogd doesn't understand spaces as - * separators between specifier and action. This syslogd now - * understands them. The old behavior caused some confusion over - * the Linux community. - * - * Thu Oct 19 00:02:07 MET 1995: Martin Schulze - * The default behavior has changed for security reasons. The - * syslogd will not receive any remote message unless you turn - * reception on with the "-r" option. - * - * Not defining SYSLOG_INET will result in not doing any network - * activity, i.e. not sending or receiving messages. I changed - * this because the old idea is implemented with the "-r" option - * and the old thing didn't work anyway. - * - * Thu Oct 26 13:14:06 MET 1995: Martin Schulze - * Added another logfile type F_FORW_UNKN. The problem I ran into - * was a name server that runs on my machine and a forwarder of - * kern.crit to another host. The hosts address can only be - * fetched using the nameserver. But named is started after - * syslogd, so syslogd complained. - * - * This logfile type will retry to get the address of the - * hostname ten times and then complain. This should be enough to - * get the named up and running during boot sequence. - * - * Fri Oct 27 14:08:15 1995: Dr. Wettstein - * Changed static array of logfiles to a dynamic array. This - * can grow during process. - * - * Fri Nov 10 23:08:18 1995: Martin Schulze - * Inserted a new tabular sys_h_errlist that contains plain text - * for error codes that are returned from the net subsystem and - * stored in h_errno. I have also changed some wrong lookups to - * sys_errlist. - * - * Wed Nov 22 22:32:55 1995: Martin Schulze - * Added the fabulous strip-domain feature that allows us to - * strip off (several) domain names from the fqdn and only log - * the simple hostname. This is useful if you're in a LAN that - * has a central log server and also different domains. - * - * I have also also added the -l switch do define hosts as - * local. These will get logged with their simple hostname, too. - * - * Thu Nov 23 19:02:56 MET DST 1995: Martin Schulze - * Added the possibility to omit fsyncing of logfiles after every - * write. This will give some performance back if you have - * programs that log in a very verbose manner (like innd or - * smartlist). Thanks to Stephen R. van den Berg <srb@cuci.nl> - * for the idea. - * - * Thu Jan 18 11:14:36 CST 1996: Dr. Wettstein - * Added patche from beta-testers to stop compile error. Also - * added removal of pid file as part of termination cleanup. - * - * Wed Feb 14 12:42:09 CST 1996: Dr. Wettstein - * Allowed forwarding of messages received from remote hosts to - * be controlled by a command-line switch. Specifying -h allows - * forwarding. The default behavior is to disable forwarding of - * messages which were received from a remote host. - * - * Parent process of syslogd does not exit until child process has - * finished initialization process. This allows rc.* startup to - * pause until syslogd facility is up and operating. - * - * Re-arranged the select code to move UNIX domain socket accepts - * to be processed later. This was a contributed change which - * has been proposed to correct the delays sometimes encountered - * when syslogd starts up. - * - * Minor code cleanups. - * - * Thu May 2 15:15:33 CDT 1996: Dr. Wettstein - * Fixed bug in init function which resulted in file descripters - * being orphaned when syslogd process was re-initialized with SIGHUP - * signal. Thanks to Edvard Tuinder - * (Edvard.Tuinder@praseodymium.cistron.nl) for putting me on the - * trail of this bug. I am amazed that we didn't catch this one - * before now. - * - * Tue May 14 00:03:35 MET DST 1996: Martin Schulze - * Corrected a mistake that causes the syslogd to stop logging at - * some virtual consoles under Linux. This was caused by checking - * the wrong error code. Thanks to Michael Nonweiler - * <mrn20@hermes.cam.ac.uk> for sending me a patch. - * - * Mon May 20 13:29:32 MET DST 1996: Miquel van Smoorenburg <miquels@cistron.nl> - * Added continuation line supported and fixed a bug in - * the init() code. - * - * Tue May 28 00:58:45 MET DST 1996: Martin Schulze - * Corrected behaviour of blocking pipes - i.e. the whole system - * hung. Michael Nonweiler <mrn20@hermes.cam.ac.uk> has sent us - * a patch to correct this. A new logfile type F_PIPE has been - * introduced. - * - * Mon Feb 3 10:12:15 MET DST 1997: Martin Schulze - * Corrected behaviour of logfiles if the file can't be opened. - * There was a bug that causes syslogd to try to log into non - * existing files which ate cpu power. - * - * Sun Feb 9 03:22:12 MET DST 1997: Martin Schulze - * Modified syslogd.c to not kill itself which confuses bash 2.0. - * - * Mon Feb 10 00:09:11 MET DST 1997: Martin Schulze - * Improved debug code to decode the numeric facility/priority - * pair into textual information. - * - * Tue Jun 10 12:35:10 MET DST 1997: Martin Schulze - * Corrected freeing of logfiles. Thanks to Jos Vos <jos@xos.nl> - * for reporting the bug and sending an idea to fix the problem. - * - * Tue Jun 10 12:51:41 MET DST 1997: Martin Schulze - * Removed sleep(10) from parent process. This has caused a slow - * startup in former times - and I don't see any reason for this. - * - * Sun Jun 15 16:23:29 MET DST 1997: Michael Alan Dorman - * Some more glibc patches made by <mdorman@debian.org>. - * - * Thu Jan 1 16:04:52 CET 1998: Martin Schulze <joey@infodrom.north.de - * Applied patch from Herbert Thielen <Herbert.Thielen@lpr.e-technik.tu-muenchen.de>. - * This included some balance parentheses for emacs and a bug in - * the exclamation mark handling. - * - * Fixed small bug which caused syslogd to write messages to the - * wrong logfile under some very rare conditions. Thanks to - * Herbert Xu <herbert@gondor.apana.org.au> for fiddling this out. - * - * Thu Jan 8 22:46:35 CET 1998: Martin Schulze <joey@infodrom.north.de> - * Reworked one line of the above patch as it prevented syslogd - * from binding the socket with the result that no messages were - * forwarded to other hosts. - * - * Sat Jan 10 01:33:06 CET 1998: Martin Schulze <joey@infodrom.north.de> - * Fixed small bugs in F_FORW_UNKN meachanism. Thanks to Torsten - * Neumann <torsten@londo.rhein-main.de> for pointing me to it. - * - * Mon Jan 12 19:50:58 CET 1998: Martin Schulze <joey@infodrom.north.de> - * Modified debug output concerning remote receiption. - * - * Mon Feb 23 23:32:35 CET 1998: Topi Miettinen <Topi.Miettinen@ml.tele.fi> - * Re-worked handling of Unix and UDP sockets to support closing / - * opening of them in order to have it open only if it is needed - * either for forwarding to a remote host or by receiption from - * the network. - * - * Wed Feb 25 10:54:09 CET 1998: Martin Schulze <joey@infodrom.north.de> - * Fixed little comparison mistake that prevented the MARK - * feature to work properly. - * - * Wed Feb 25 13:21:44 CET 1998: Martin Schulze <joey@infodrom.north.de> - * Corrected Topi's patch as it prevented forwarding during - * startup due to an unknown LogPort. - * - * Sat Oct 10 20:01:48 CEST 1998: Martin Schulze <joey@infodrom.north.de> - * Added support for TESTING define which will turn syslogd into - * stdio-mode used for debugging. - * - * Sun Oct 11 20:16:59 CEST 1998: Martin Schulze <joey@infodrom.north.de> - * Reworked the initialization/fork code. Now the parent - * process activates a signal handler which the daughter process - * will raise if it is initialized. Only after that one the - * parent process may exit. Otherwise klogd might try to flush - * its log cache while syslogd can't receive the messages yet. - * - * Mon Oct 12 13:30:35 CEST 1998: Martin Schulze <joey@infodrom.north.de> - * Redirected some error output with regard to argument parsing to - * stderr. - * - * Mon Oct 12 14:02:51 CEST 1998: Martin Schulze <joey@infodrom.north.de> - * Applied patch provided vom Topi Miettinen with regard to the - * people from OpenBSD. This provides the additional '-a' - * argument used for specifying additional UNIX domain sockets to - * listen to. This is been used with chroot()'ed named's for - * example. See for http://www.psionic.com/papers/dns.html - * - * Mon Oct 12 18:29:44 CEST 1998: Martin Schulze <joey@infodrom.north.de> - * Added `ftp' facility which was introduced in glibc version 2. - * It's #ifdef'ed so won't harm with older libraries. - * - * Mon Oct 12 19:59:21 MET DST 1998: Martin Schulze <joey@infodrom.north.de> - * Code cleanups with regard to bsd -> posix transition and - * stronger security (buffer length checking). Thanks to Topi - * Miettinen <tom@medialab.sonera.net> - * . index() --> strchr() - * . sprintf() --> snprintf() - * . bcopy() --> memcpy() - * . bzero() --> memset() - * . UNAMESZ --> UT_NAMESIZE - * . sys_errlist --> strerror() - * - * Mon Oct 12 20:22:59 CEST 1998: Martin Schulze <joey@infodrom.north.de> - * Added support for setutent()/getutent()/endutend() instead of - * binary reading the UTMP file. This is the the most portable - * way. This allows /var/run/utmp format to change, even to a - * real database or utmp daemon. Also if utmp file locking is - * implemented in libc, syslog will use it immediately. Thanks - * to Topi Miettinen <tom@medialab.sonera.net>. - * - * Mon Oct 12 20:49:18 MET DST 1998: Martin Schulze <joey@infodrom.north.de> - * Avoid logging of SIGCHLD when syslogd is in the process of - * exiting and closing its files. Again thanks to Topi. - * - * Mon Oct 12 22:18:34 CEST 1998: Martin Schulze <joey@infodrom.north.de> - * Modified printline() to support 8bit characters - such as - * russion letters. Thanks to Vladas Lapinskas <lapinskas@mail.iae.lt>. - * - * Sat Nov 14 02:29:37 CET 1998: Martin Schulze <joey@infodrom.north.de> - * ``-m 0'' now turns of MARK logging entirely. - * - * Tue Jan 19 01:04:18 MET 1999: Martin Schulze <joey@infodrom.north.de> - * Finally fixed an error with `-a' processing, thanks to Topi - * Miettinen <tom@medialab.sonera.net>. - * - * Sun May 23 10:08:53 CEST 1999: Martin Schulze <joey@infodrom.north.de> - * Removed superflous call to utmpname(). The path to the utmp - * file is defined in the used libc and should not be hardcoded - * into the syslogd binary referring the system it was compiled on. - * - * Sun Sep 17 20:45:33 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> - * Fixed some bugs in printline() code that did not escape - * control characters '\177' through '\237' and contained a - * single-byte buffer overflow. Thanks to Solar Designer - * <solar@false.com>. - * - * Sun Sep 17 21:26:16 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> - * Don't close open sockets upon reload. Thanks to Bill - * Nottingham. - * - * Mon Sep 18 09:10:47 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> - * Fixed bug in printchopped() that caused syslogd to emit - * kern.emerg messages when splitting long lines. Thanks to - * Daniel Jacobowitz <dan@debian.org> for the fix. - * - * Mon Sep 18 15:33:26 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> - * Removed unixm/unix domain sockets and switch to Datagram Unix - * Sockets. This should remove one possibility to play DoS with - * syslogd. Thanks to Olaf Kirch <okir@caldera.de> for the patch. - * - * Sun Mar 11 20:23:44 CET 2001: Martin Schulze <joey@infodrom.ffis.de> - * Don't return a closed fd if `-a' is called with a wrong path. - * Thanks to Bill Nottingham <notting@redhat.com> for providing - * a patch. - * - * The following copyright and license applies to the original - * sysklogd package that was used as a basis for this release of - * rsyslogd. Obviously, it applies to those parts stemming directly - * back to the original sysklogd package. - * - * Copyright (c) 1983, 1988 Regents of the University of California. - * All rights reserved. - * - * Redistribution and use in source and binary forms are permitted - * provided that the above copyright notice and this paragraph are - * duplicated in all such forms and that any documentation, - * advertising materials, and other materials related to such - * distribution and use acknowledge that the software was developed - * by the University of California, Berkeley. The name of the - * University may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ +This file has been superseeded by ChangeLog. Please see there. diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 00000000..b6d1f156 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,896 @@ +# generated automatically by aclocal 1.10 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_if(m4_PACKAGE_VERSION, [2.61],, +[m4_fatal([this file was generated for autoconf 2.61. +You have another version of autoconf. If you want to use that, +you should regenerate the build system entirely.], [63])]) + +# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.10' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.10], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.10])dnl +_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 3 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 12 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.60])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_PROG_CC_C_O +# -------------- +# Like AC_PROG_CC_C_O, but changed for automake. +AC_DEFUN([AM_PROG_CC_C_O], +[AC_REQUIRE([AC_PROG_CC_C_O])dnl +AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +# FIXME: we rely on the cache variable name because +# there is no other way. +set dummy $CC +ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` +if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +dnl Make sure AC_PROG_CC is never called again, or it will override our +dnl setting of CC. +m4_define([AC_PROG_CC], + [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar <conftest.tar]) + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/compile b/compile new file mode 100755 index 00000000..1b1d2321 --- /dev/null +++ b/compile @@ -0,0 +1,142 @@ +#! /bin/sh +# Wrapper for compilers which do not understand `-c -o'. + +scriptversion=2005-05-14.22 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Written by Tom Tromey <tromey@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand `-c -o'. +Remove `-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file `INSTALL'. + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; +esac + +ofile= +cfile= +eat= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we strip `-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no `-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # `.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` + +# Create the lock directory. +# Note: use `[/.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/config.h b/config.h new file mode 100644 index 00000000..04ac5fec --- /dev/null +++ b/config.h @@ -0,0 +1,275 @@ +/* config.h. Generated from config.h.in by configure. */ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* klogd functionality is integrated. */ +#define FEATURE_KLOGD 1 + +/* Regular expressions support enabled. */ +#define FEATURE_REGEXP 1 + +/* Define to 1 if you have the `alarm' function. */ +#define HAVE_ALARM 1 + +/* Define to 1 if you have the <arpa/inet.h> header file. */ +#define HAVE_ARPA_INET_H 1 + +/* Define to 1 if you have the <arpa/nameser.h> header file. */ +#define HAVE_ARPA_NAMESER_H 1 + +/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */ +/* #undef HAVE_DOPRNT */ + +/* Define to 1 if you have the <fcntl.h> header file. */ +#define HAVE_FCNTL_H 1 + +/* Define to 1 if you have the `fork' function. */ +#define HAVE_FORK 1 + +/* Define to 1 if you have the `gethostbyname' function. */ +#define HAVE_GETHOSTBYNAME 1 + +/* Define to 1 if you have the `gethostname' function. */ +#define HAVE_GETHOSTNAME 1 + +/* Define to 1 if you have the `gettimeofday' function. */ +#define HAVE_GETTIMEOFDAY 1 + +/* Define to 1 if you have the <inttypes.h> header file. */ +#define HAVE_INTTYPES_H 1 + +/* Define to 1 if you have the <locale.h> header file. */ +#define HAVE_LOCALE_H 1 + +/* Define to 1 if your system has a GNU libc compatible `malloc' function, and + to 0 otherwise. */ +#define HAVE_MALLOC 1 + +/* Define to 1 if you have the <memory.h> header file. */ +#define HAVE_MEMORY_H 1 + +/* Define to 1 if you have the `memset' function. */ +#define HAVE_MEMSET 1 + +/* Define to 1 if you have the <netdb.h> header file. */ +#define HAVE_NETDB_H 1 + +/* Define to 1 if you have the <netinet/in.h> header file. */ +#define HAVE_NETINET_IN_H 1 + +/* Define to 1 if you have the <paths.h> header file. */ +#define HAVE_PATHS_H 1 + +/* Define to 1 if your system has a GNU libc compatible `realloc' function, + and to 0 otherwise. */ +#define HAVE_REALLOC 1 + +/* Define to 1 if you have the `regcomp' function. */ +#define HAVE_REGCOMP 1 + +/* Define to 1 if you have the <resolv.h> header file. */ +#define HAVE_RESOLV_H 1 + +/* Define to 1 if you have the `select' function. */ +#define HAVE_SELECT 1 + +/* Define to 1 if you have the `socket' function. */ +#define HAVE_SOCKET 1 + +/* Define to 1 if `stat' has the bug that it succeeds when given the + zero-length file name argument. */ +/* #undef HAVE_STAT_EMPTY_STRING_BUG */ + +/* Define to 1 if you have the <stdint.h> header file. */ +#define HAVE_STDINT_H 1 + +/* Define to 1 if you have the <stdio_ext.h> header file. */ +#define HAVE_STDIO_EXT_H 1 + +/* Define to 1 if you have the <stdlib.h> header file. */ +#define HAVE_STDLIB_H 1 + +/* Define to 1 if you have the `strcasecmp' function. */ +#define HAVE_STRCASECMP 1 + +/* Define to 1 if you have the `strchr' function. */ +#define HAVE_STRCHR 1 + +/* Define to 1 if you have the `strerror' function. */ +#define HAVE_STRERROR 1 + +/* Define to 1 if you have the <strings.h> header file. */ +#define HAVE_STRINGS_H 1 + +/* Define to 1 if you have the <string.h> header file. */ +#define HAVE_STRING_H 1 + +/* Define to 1 if you have the `strndup' function. */ +#define HAVE_STRNDUP 1 + +/* Define to 1 if you have the `strrchr' function. */ +#define HAVE_STRRCHR 1 + +/* Define to 1 if you have the `strstr' function. */ +#define HAVE_STRSTR 1 + +/* Define to 1 if you have the `strtol' function. */ +#define HAVE_STRTOL 1 + +/* Define to 1 if you have the `strtoul' function. */ +#define HAVE_STRTOUL 1 + +/* Define to 1 if you have the <syslog.h> header file. */ +#define HAVE_SYSLOG_H 1 + +/* Define to 1 if you have the <sys/file.h> header file. */ +#define HAVE_SYS_FILE_H 1 + +/* Define to 1 if you have the <sys/ioctl.h> header file. */ +#define HAVE_SYS_IOCTL_H 1 + +/* Define to 1 if you have the <sys/param.h> header file. */ +#define HAVE_SYS_PARAM_H 1 + +/* Define to 1 if you have the <sys/select.h> header file. */ +#define HAVE_SYS_SELECT_H 1 + +/* Define to 1 if you have the <sys/socket.h> header file. */ +#define HAVE_SYS_SOCKET_H 1 + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#define HAVE_SYS_STAT_H 1 + +/* Define to 1 if you have the <sys/time.h> header file. */ +#define HAVE_SYS_TIME_H 1 + +/* Define to 1 if you have the <sys/types.h> header file. */ +#define HAVE_SYS_TYPES_H 1 + +/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */ +#define HAVE_SYS_WAIT_H 1 + +/* Define to 1 if you have the `uname' function. */ +#define HAVE_UNAME 1 + +/* Define to 1 if you have the <unistd.h> header file. */ +#define HAVE_UNISTD_H 1 + +/* Define to 1 if you have the <utmp.h> header file. */ +#define HAVE_UTMP_H 1 + +/* Define to 1 if you have the `vfork' function. */ +#define HAVE_VFORK 1 + +/* Define to 1 if you have the <vfork.h> header file. */ +/* #undef HAVE_VFORK_H */ + +/* Define to 1 if you have the `vprintf' function. */ +#define HAVE_VPRINTF 1 + +/* Define to 1 if you have the `wait3' system call. Deprecated, you should no + longer depend upon `wait3'. */ +#define HAVE_WAIT3 1 + +/* Define to 1 if `fork' works. */ +#define HAVE_WORKING_FORK 1 + +/* Define to 1 if `vfork' works. */ +#define HAVE_WORKING_VFORK 1 + +/* Define to 1 if `lstat' dereferences a symlink specified with a trailing + slash. */ +#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 + +/* Defined if debug mode is disabled. */ +#define NDEBUG 1 + +/* Defined when large file support is disabled. */ +/* #undef NOLARGEFILE */ + +/* Define to 1 if your C compiler doesn't accept -c and -o together. */ +/* #undef NO_MINUS_C_MINUS_O */ + +/* Name of package */ +#define PACKAGE "rsyslog" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "rsyslog@lists.adiscon.com." + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "rsyslog" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "rsyslog 1.16.0" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "rsyslog" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "1.16.0" + +/* Define as the return type of signal handlers (`int' or `void'). */ +#define RETSIGTYPE void + +/* Define to the type of arg 1 for `select'. */ +#define SELECT_TYPE_ARG1 int + +/* Define to the type of args 2, 3 and 4 for `select'. */ +#define SELECT_TYPE_ARG234 (fd_set *) + +/* Define to the type of arg 5 for `select'. */ +#define SELECT_TYPE_ARG5 (struct timeval *) + +/* Define to 1 if you have the ANSI C header files. */ +#define STDC_HEADERS 1 + +/* Why there is this macro */ +#define SYSLOG_INET 1 + +/* I'd like to get rid of this. */ +#define SYSV 1 + +/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */ +#define TIME_WITH_SYS_TIME 1 + +/* Define to 1 if your <sys/time.h> declares `struct tm'. */ +/* #undef TM_IN_SYS_TIME */ + +/* Define if you want to enable zlib support */ +#define USE_NETZIP 1 + +/* Multithreading support enabled. */ +#define USE_PTHREADS 1 + +/* Version number of package */ +#define VERSION "1.16.0" + +/* MySql database support enabled */ +/* #undef WITH_DB */ + +/* Define to empty if `const' does not conform to ANSI C. */ +/* #undef const */ + +/* Define to rpl_malloc if the replacement function should be used. */ +/* #undef malloc */ + +/* Define to `long int' if <sys/types.h> does not define. */ +/* #undef off_t */ + +/* Define to `int' if <sys/types.h> does not define. */ +/* #undef pid_t */ + +/* Define to rpl_realloc if the replacement function should be used. */ +/* #undef realloc */ + +/* Define to `unsigned int' if <sys/types.h> does not define. */ +/* #undef size_t */ + +/* Define to `int' if <sys/types.h> does not define. */ +/* #undef ssize_t */ + +/* Define as `fork' if `vfork' does not work. */ +/* #undef vfork */ + +/* Define to empty if the keyword `volatile' does not work. Warning: valid + code using `volatile' can become incorrect without. Disable with care. */ +/* #undef volatile */ diff --git a/configure b/configure new file mode 100755 index 00000000..f8e4c08e --- /dev/null +++ b/configure @@ -0,0 +1,8572 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.61 for rsyslog 1.16.0. +# +# Report bugs to <rsyslog@lists.adiscon.com.>. +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell autoconf@gnu.org about your system, + echo including any error possibly output before this + echo message +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + +exec 7<&0 </dev/null 6>&1 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Identity of this package. +PACKAGE_NAME='rsyslog' +PACKAGE_TARNAME='rsyslog' +PACKAGE_VERSION='1.16.0' +PACKAGE_STRING='rsyslog 1.16.0' +PACKAGE_BUGREPORT='rsyslog@lists.adiscon.com.' + +ac_unique_file="syslogd.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include <stdio.h> +#ifdef HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif +#ifdef HAVE_SYS_STAT_H +# include <sys/stat.h> +#endif +#ifdef STDC_HEADERS +# include <stdlib.h> +# include <stddef.h> +#else +# ifdef HAVE_STDLIB_H +# include <stdlib.h> +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include <memory.h> +# endif +# include <string.h> +#endif +#ifdef HAVE_STRINGS_H +# include <strings.h> +#endif +#ifdef HAVE_INTTYPES_H +# include <inttypes.h> +#endif +#ifdef HAVE_STDINT_H +# include <stdint.h> +#endif +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif" + +ac_subst_vars='SHELL +PATH_SEPARATOR +PACKAGE_NAME +PACKAGE_TARNAME +PACKAGE_VERSION +PACKAGE_STRING +PACKAGE_BUGREPORT +exec_prefix +prefix +program_transform_name +bindir +sbindir +libexecdir +datarootdir +datadir +sysconfdir +sharedstatedir +localstatedir +includedir +oldincludedir +docdir +infodir +htmldir +dvidir +pdfdir +psdir +libdir +localedir +mandir +DEFS +ECHO_C +ECHO_N +ECHO_T +LIBS +build_alias +host_alias +target_alias +INSTALL_PROGRAM +INSTALL_SCRIPT +INSTALL_DATA +am__isrc +CYGPATH_W +PACKAGE +VERSION +ACLOCAL +AUTOCONF +AUTOMAKE +AUTOHEADER +MAKEINFO +install_sh +STRIP +INSTALL_STRIP_PROGRAM +mkdir_p +AWK +SET_MAKE +am__leading_dot +AMTAR +am__tar +am__untar +CC +CFLAGS +LDFLAGS +CPPFLAGS +ac_ct_CC +EXEEXT +OBJEXT +DEPDIR +am__include +am__quote +AMDEP_TRUE +AMDEP_FALSE +AMDEPBACKSLASH +CCDEPMODE +am__fastdepCC_TRUE +am__fastdepCC_FALSE +CPP +GREP +EGREP +LIBOBJS +MYSQL_CONFIG +enable_mysql_TRUE +enable_mysql_FALSE +mysql_includes +mysql_libs +zlib_libs +pthreads_libs +LTLIBOBJS' +ac_subst_files='' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute directory names. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$0" || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures rsyslog 1.16.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/rsyslog] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of rsyslog 1.16.0:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-largefile Enable large file support [default=yes] + --enable-mysql Enable MySql database support [default=no] + --enable-regexp Enable regular expressions support [default=yes] + --enable-zlib Enable zlib compression support [default=yes] + --enable-pthreads Enable multithreading via pthreads [default=yes] + --enable-klogd Integrated klogd functionality [default=yes] + --enable-debug Enable debug mode [default=no] + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> + LIBS libraries to pass to the linker, e.g. -l<library> + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if + you have headers in a nonstandard directory <include dir> + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to <rsyslog@lists.adiscon.com.>. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +rsyslog configure 1.16.0 +generated by GNU Autoconf 2.61 + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by rsyslog $as_me 1.16.0, which was +generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -n "$CONFIG_SITE"; then + set x "$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + set x "$prefix/share/config.site" "$prefix/etc/config.site" +else + set x "$ac_default_prefix/share/config.site" \ + "$ac_default_prefix/etc/config.site" +fi +shift +for ac_site_file +do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + + + + + + + + + + + + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +am__api_version='1.10' + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done +IFS=$as_save_IFS + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. echo might interpret backslashes. +# By default was `s,x,x', remove it if useless. +cat <<\_ACEOF >conftest.sed +s/[\\$]/&&/g;s/;s,x,x,$// +_ACEOF +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +rm -f conftest.sed + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done +done +IFS=$as_save_IFS + +fi + + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version + MKDIR_P="$ac_install_sh -d" + fi +fi +{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +echo "${ECHO_T}$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { echo "$as_me:$LINENO: result: $AWK" >&5 +echo "${ECHO_T}$AWK" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } + SET_MAKE= +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE=rsyslog + VERSION=1.16.0 + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + + +ac_config_headers="$ac_config_headers config.h" + + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO: checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +# +# List of possible output files, starting from the most likely. +# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) +# only as a last resort. b.out is created by i960 compilers. +ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' +# +# The IRIX 6 linker writes into existing files which may not be +# executable, retaining their permissions. Remove them first so a +# subsequent execution test works. +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { (ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi + +{ echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6; } +if test -z "$ac_file"; then + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext + +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } +{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6; } + +{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6; } ;; + xno) + { echo "$as_me:$LINENO: result: unsupported" >&5 +echo "${ECHO_T}unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; +esac + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi + + +{ echo "$as_me:$LINENO: result: $_am_result" >&5 +echo "${ECHO_T}$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +if test "x$CC" != xcc; then + { echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 +echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6; } +else + { echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 +echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6; } +fi +set dummy $CC; ac_cc=`echo $2 | + sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +# Make sure it works both with $CC and with simple cc. +# We do the test twice because some compilers refuse to overwrite an +# existing .o file with -o, though they will create one. +ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' +rm -f conftest2.* +if { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + test -f conftest2.$ac_objext && { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; +then + eval ac_cv_prog_cc_${ac_cc}_c_o=yes + if test "x$CC" != xcc; then + # Test first that cc exists at all. + if { ac_try='cc -c conftest.$ac_ext >&5' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' + rm -f conftest2.* + if { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + test -f conftest2.$ac_objext && { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; + then + # cc works too. + : + else + # cc exists but doesn't like -o. + eval ac_cv_prog_cc_${ac_cc}_c_o=no + fi + fi + fi +else + eval ac_cv_prog_cc_${ac_cc}_c_o=no +fi +rm -f core conftest* + +fi +if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } + +cat >>confdefs.h <<\_ACEOF +#define NO_MINUS_C_MINUS_O 1 +_ACEOF + +fi + +# FIXME: we rely on the cache variable name because +# there is no other way. +set dummy $CC +ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi + + + +# Checks for libraries. + +# Checks for header files. + + + + + + +for ac_header in sys/types.h netinet/in.h arpa/nameser.h netdb.h resolv.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif +#ifdef HAVE_NETINET_IN_H +# include <netinet/in.h> /* inet_ functions / structs */ +#endif +#ifdef HAVE_ARPA_NAMESER_H +# include <arpa/nameser.h> /* DNS HEADER struct */ +#endif +#ifdef HAVE_NETDB_H +# include <netdb.h> +#endif + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Extract the first word of "grep ggrep" to use in msg output +if test -z "$GREP"; then +set dummy grep ggrep; ac_prog_name=$2 +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_GREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue + # Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_GREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + +fi + +GREP="$ac_cv_path_GREP" +if test -z "$GREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi + +else + ac_cv_path_GREP=$GREP +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +echo "${ECHO_T}$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + # Extract the first word of "egrep" to use in msg output +if test -z "$EGREP"; then +set dummy egrep; ac_prog_name=$2 +if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_EGREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue + # Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_EGREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + +fi + +EGREP="$ac_cv_path_EGREP" +if test -z "$EGREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi + +else + ac_cv_path_EGREP=$EGREP +fi + + + fi +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <string.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ctype.h> +#include <stdlib.h> +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +fi +{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5 +echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6; } +if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <sys/wait.h> +#ifndef WEXITSTATUS +# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) +#endif +#ifndef WIFEXITED +# define WIFEXITED(stat_val) (((stat_val) & 255) == 0) +#endif + +int +main () +{ + int s; + wait (&s); + s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_sys_wait_h=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_sys_wait_h=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6; } +if test $ac_cv_header_sys_wait_h = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_SYS_WAIT_H 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + + + + + + + + + + + + + + + +for ac_header in arpa/inet.h fcntl.h locale.h netdb.h netinet/in.h paths.h stdio_ext.h stdlib.h string.h sys/file.h sys/ioctl.h sys/param.h sys/socket.h sys/time.h syslog.h unistd.h utmp.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ----------------------------------------- ## +## Report this to rsyslog@lists.adiscon.com. ## +## ----------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +# Checks for typedefs, structures, and compiler characteristics. +{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; } +if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset cs; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_c_const=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_c_const=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +echo "${ECHO_T}$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +cat >>confdefs.h <<\_ACEOF +#define const +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking for off_t" >&5 +echo $ECHO_N "checking for off_t... $ECHO_C" >&6; } +if test "${ac_cv_type_off_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +typedef off_t ac__type_new_; +int +main () +{ +if ((ac__type_new_ *) 0) + return 0; +if (sizeof (ac__type_new_)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_type_off_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_type_off_t=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 +echo "${ECHO_T}$ac_cv_type_off_t" >&6; } +if test $ac_cv_type_off_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF +#define off_t long int +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking for pid_t" >&5 +echo $ECHO_N "checking for pid_t... $ECHO_C" >&6; } +if test "${ac_cv_type_pid_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +typedef pid_t ac__type_new_; +int +main () +{ +if ((ac__type_new_ *) 0) + return 0; +if (sizeof (ac__type_new_)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_type_pid_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_type_pid_t=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 +echo "${ECHO_T}$ac_cv_type_pid_t" >&6; } +if test $ac_cv_type_pid_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF +#define pid_t int +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking for size_t" >&5 +echo $ECHO_N "checking for size_t... $ECHO_C" >&6; } +if test "${ac_cv_type_size_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +typedef size_t ac__type_new_; +int +main () +{ +if ((ac__type_new_ *) 0) + return 0; +if (sizeof (ac__type_new_)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_type_size_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_type_size_t=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 +echo "${ECHO_T}$ac_cv_type_size_t" >&6; } +if test $ac_cv_type_size_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF +#define size_t unsigned int +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking for ssize_t" >&5 +echo $ECHO_N "checking for ssize_t... $ECHO_C" >&6; } +if test "${ac_cv_type_ssize_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +typedef ssize_t ac__type_new_; +int +main () +{ +if ((ac__type_new_ *) 0) + return 0; +if (sizeof (ac__type_new_)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_type_ssize_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_type_ssize_t=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_type_ssize_t" >&5 +echo "${ECHO_T}$ac_cv_type_ssize_t" >&6; } +if test $ac_cv_type_ssize_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF +#define ssize_t int +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 +echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; } +if test "${ac_cv_header_time+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <sys/time.h> +#include <time.h> + +int +main () +{ +if ((struct tm *) 0) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_time=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_time=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 +echo "${ECHO_T}$ac_cv_header_time" >&6; } +if test $ac_cv_header_time = yes; then + +cat >>confdefs.h <<\_ACEOF +#define TIME_WITH_SYS_TIME 1 +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 +echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6; } +if test "${ac_cv_struct_tm+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <time.h> + +int +main () +{ +struct tm tm; + int *p = &tm.tm_sec; + return !p; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_struct_tm=time.h +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_struct_tm=sys/time.h +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 +echo "${ECHO_T}$ac_cv_struct_tm" >&6; } +if test $ac_cv_struct_tm = sys/time.h; then + +cat >>confdefs.h <<\_ACEOF +#define TM_IN_SYS_TIME 1 +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking for working volatile" >&5 +echo $ECHO_N "checking for working volatile... $ECHO_C" >&6; } +if test "${ac_cv_c_volatile+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + +volatile int x; +int * volatile y = (int *) 0; +return !x && !y; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_c_volatile=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_c_volatile=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_c_volatile" >&5 +echo "${ECHO_T}$ac_cv_c_volatile" >&6; } +if test $ac_cv_c_volatile = no; then + +cat >>confdefs.h <<\_ACEOF +#define volatile +_ACEOF + +fi + + +# Checks for library functions. + +for ac_header in vfork.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ----------------------------------------- ## +## Report this to rsyslog@lists.adiscon.com. ## +## ----------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +for ac_func in fork vfork +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +if test "x$ac_cv_func_fork" = xyes; then + { echo "$as_me:$LINENO: checking for working fork" >&5 +echo $ECHO_N "checking for working fork... $ECHO_C" >&6; } +if test "${ac_cv_func_fork_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_fork_works=cross +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ + + /* By Ruediger Kuhlmann. */ + return fork () < 0; + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_fork_works=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_fork_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5 +echo "${ECHO_T}$ac_cv_func_fork_works" >&6; } + +else + ac_cv_func_fork_works=$ac_cv_func_fork +fi +if test "x$ac_cv_func_fork_works" = xcross; then + case $host in + *-*-amigaos* | *-*-msdosdjgpp*) + # Override, as these systems have only a dummy fork() stub + ac_cv_func_fork_works=no + ;; + *) + ac_cv_func_fork_works=yes + ;; + esac + { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 +echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} +fi +ac_cv_func_vfork_works=$ac_cv_func_vfork +if test "x$ac_cv_func_vfork" = xyes; then + { echo "$as_me:$LINENO: checking for working vfork" >&5 +echo $ECHO_N "checking for working vfork... $ECHO_C" >&6; } +if test "${ac_cv_func_vfork_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_vfork_works=cross +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Thanks to Paul Eggert for this test. */ +$ac_includes_default +#include <sys/wait.h> +#ifdef HAVE_VFORK_H +# include <vfork.h> +#endif +/* On some sparc systems, changes by the child to local and incoming + argument registers are propagated back to the parent. The compiler + is told about this with #include <vfork.h>, but some compilers + (e.g. gcc -O) don't grok <vfork.h>. Test for this by using a + static variable whose address is put into a register that is + clobbered by the vfork. */ +static void +#ifdef __cplusplus +sparc_address_test (int arg) +# else +sparc_address_test (arg) int arg; +#endif +{ + static pid_t child; + if (!child) { + child = vfork (); + if (child < 0) { + perror ("vfork"); + _exit(2); + } + if (!child) { + arg = getpid(); + write(-1, "", 0); + _exit (arg); + } + } +} + +int +main () +{ + pid_t parent = getpid (); + pid_t child; + + sparc_address_test (0); + + child = vfork (); + + if (child == 0) { + /* Here is another test for sparc vfork register problems. This + test uses lots of local variables, at least as many local + variables as main has allocated so far including compiler + temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris + 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should + reuse the register of parent for one of the local variables, + since it will think that parent can't possibly be used any more + in this routine. Assigning to the local variable will thus + munge parent in the parent process. */ + pid_t + p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), + p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); + /* Convince the compiler that p..p7 are live; otherwise, it might + use the same hardware register for all 8 local variables. */ + if (p != p1 || p != p2 || p != p3 || p != p4 + || p != p5 || p != p6 || p != p7) + _exit(1); + + /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent + from child file descriptors. If the child closes a descriptor + before it execs or exits, this munges the parent's descriptor + as well. Test for this by closing stdout in the child. */ + _exit(close(fileno(stdout)) != 0); + } else { + int status; + struct stat st; + + while (wait(&status) != child) + ; + return ( + /* Was there some problem with vforking? */ + child < 0 + + /* Did the child fail? (This shouldn't happen.) */ + || status + + /* Did the vfork/compiler bug occur? */ + || parent != getpid() + + /* Did the file descriptor bug occur? */ + || fstat(fileno(stdout), &st) != 0 + ); + } +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_vfork_works=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_vfork_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5 +echo "${ECHO_T}$ac_cv_func_vfork_works" >&6; } + +fi; +if test "x$ac_cv_func_fork_works" = xcross; then + ac_cv_func_vfork_works=$ac_cv_func_vfork + { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 +echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} +fi + +if test "x$ac_cv_func_vfork_works" = xyes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_WORKING_VFORK 1 +_ACEOF + +else + +cat >>confdefs.h <<\_ACEOF +#define vfork fork +_ACEOF + +fi +if test "x$ac_cv_func_fork_works" = xyes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_WORKING_FORK 1 +_ACEOF + +fi + +if test $ac_cv_c_compiler_gnu = yes; then + { echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 +echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6; } +if test "${ac_cv_prog_gcc_traditional+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_pattern="Autoconf.*'x'" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sgtty.h> +Autoconf TIOCGETP +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then + ac_cv_prog_gcc_traditional=yes +else + ac_cv_prog_gcc_traditional=no +fi +rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <termio.h> +Autoconf TCGETA +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then + ac_cv_prog_gcc_traditional=yes +fi +rm -f conftest* + + fi +fi +{ echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 +echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6; } + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi +fi + + +for ac_header in stdlib.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ----------------------------------------- ## +## Report this to rsyslog@lists.adiscon.com. ## +## ----------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +{ echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 +echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6; } +if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_malloc_0_nonnull=no +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#if defined STDC_HEADERS || defined HAVE_STDLIB_H +# include <stdlib.h> +#else +char *malloc (); +#endif + +int +main () +{ +return ! malloc (0); + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_malloc_0_nonnull=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_malloc_0_nonnull=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 +echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6; } +if test $ac_cv_func_malloc_0_nonnull = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_MALLOC 1 +_ACEOF + +else + cat >>confdefs.h <<\_ACEOF +#define HAVE_MALLOC 0 +_ACEOF + + case " $LIBOBJS " in + *" malloc.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS malloc.$ac_objext" + ;; +esac + + +cat >>confdefs.h <<\_ACEOF +#define malloc rpl_malloc +_ACEOF + +fi + + + + +for ac_header in stdlib.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ----------------------------------------- ## +## Report this to rsyslog@lists.adiscon.com. ## +## ----------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +{ echo "$as_me:$LINENO: checking for GNU libc compatible realloc" >&5 +echo $ECHO_N "checking for GNU libc compatible realloc... $ECHO_C" >&6; } +if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_realloc_0_nonnull=no +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#if defined STDC_HEADERS || defined HAVE_STDLIB_H +# include <stdlib.h> +#else +char *realloc (); +#endif + +int +main () +{ +return ! realloc (0, 0); + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_realloc_0_nonnull=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_realloc_0_nonnull=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_realloc_0_nonnull" >&5 +echo "${ECHO_T}$ac_cv_func_realloc_0_nonnull" >&6; } +if test $ac_cv_func_realloc_0_nonnull = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_REALLOC 1 +_ACEOF + +else + cat >>confdefs.h <<\_ACEOF +#define HAVE_REALLOC 0 +_ACEOF + + case " $LIBOBJS " in + *" realloc.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS realloc.$ac_objext" + ;; +esac + + +cat >>confdefs.h <<\_ACEOF +#define realloc rpl_realloc +_ACEOF + +fi + + + + + +for ac_header in sys/select.h sys/socket.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ----------------------------------------- ## +## Report this to rsyslog@lists.adiscon.com. ## +## ----------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +{ echo "$as_me:$LINENO: checking types of arguments for select" >&5 +echo $ECHO_N "checking types of arguments for select... $ECHO_C" >&6; } +if test "${ac_cv_func_select_args+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + for ac_arg234 in 'fd_set *' 'int *' 'void *'; do + for ac_arg1 in 'int' 'size_t' 'unsigned long int' 'unsigned int'; do + for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#ifdef HAVE_SYS_SELECT_H +# include <sys/select.h> +#endif +#ifdef HAVE_SYS_SOCKET_H +# include <sys/socket.h> +#endif + +int +main () +{ +extern int select ($ac_arg1, + $ac_arg234, $ac_arg234, $ac_arg234, + $ac_arg5); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_func_select_args="$ac_arg1,$ac_arg234,$ac_arg5"; break 3 +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + done +done +# Provide a safe default value. +: ${ac_cv_func_select_args='int,int *,struct timeval *'} + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_select_args" >&5 +echo "${ECHO_T}$ac_cv_func_select_args" >&6; } +ac_save_IFS=$IFS; IFS=',' +set dummy `echo "$ac_cv_func_select_args" | sed 's/\*/\*/g'` +IFS=$ac_save_IFS +shift + +cat >>confdefs.h <<_ACEOF +#define SELECT_TYPE_ARG1 $1 +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define SELECT_TYPE_ARG234 ($2) +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define SELECT_TYPE_ARG5 ($3) +_ACEOF + +rm -f conftest* + +{ echo "$as_me:$LINENO: checking return type of signal handlers" >&5 +echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6; } +if test "${ac_cv_type_signal+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <signal.h> + +int +main () +{ +return *(signal (0, 0)) (0) == 1; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_type_signal=int +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_type_signal=void +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 +echo "${ECHO_T}$ac_cv_type_signal" >&6; } + +cat >>confdefs.h <<_ACEOF +#define RETSIGTYPE $ac_cv_type_signal +_ACEOF + + +{ echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 +echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6; } +if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + rm -f conftest.sym conftest.file +echo >conftest.file +if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then + if test "$cross_compiling" = yes; then + ac_cv_func_lstat_dereferences_slashed_symlink=no +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +struct stat sbuf; + /* Linux will dereference the symlink and fail. + That is better in the sense that it means we will not + have to compile and use the lstat wrapper. */ + return lstat ("conftest.sym/", &sbuf) == 0; + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_lstat_dereferences_slashed_symlink=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_lstat_dereferences_slashed_symlink=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +else + # If the `ln -s' command failed, then we probably don't even + # have an lstat function. + ac_cv_func_lstat_dereferences_slashed_symlink=no +fi +rm -f conftest.sym conftest.file + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 +echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; } + +test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && + +cat >>confdefs.h <<_ACEOF +#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 +_ACEOF + + +if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then + case " $LIBOBJS " in + *" lstat.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS lstat.$ac_objext" + ;; +esac + +fi + +{ echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 +echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6; } +if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_stat_empty_string_bug=yes +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +struct stat sbuf; + return stat ("", &sbuf) == 0; + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_stat_empty_string_bug=no +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_stat_empty_string_bug=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 +echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6; } +if test $ac_cv_func_stat_empty_string_bug = yes; then + case " $LIBOBJS " in + *" stat.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS stat.$ac_objext" + ;; +esac + + +cat >>confdefs.h <<_ACEOF +#define HAVE_STAT_EMPTY_STRING_BUG 1 +_ACEOF + +fi + + +for ac_func in vprintf +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +{ echo "$as_me:$LINENO: checking for _doprnt" >&5 +echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6; } +if test "${ac_cv_func__doprnt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define _doprnt innocuous__doprnt + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char _doprnt (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef _doprnt + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char _doprnt (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub__doprnt || defined __stub____doprnt +choke me +#endif + +int +main () +{ +return _doprnt (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_func__doprnt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func__doprnt=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 +echo "${ECHO_T}$ac_cv_func__doprnt" >&6; } +if test $ac_cv_func__doprnt = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_DOPRNT 1 +_ACEOF + +fi + +fi +done + + +{ echo "$as_me:$LINENO: checking for wait3 that fills in rusage" >&5 +echo $ECHO_N "checking for wait3 that fills in rusage... $ECHO_C" >&6; } +if test "${ac_cv_func_wait3_rusage+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_wait3_rusage=no +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <sys/time.h> +#include <sys/resource.h> +#include <sys/wait.h> +/* HP-UX has wait3 but does not fill in rusage at all. */ +int +main () +{ + struct rusage r; + int i; + /* Use a field that we can force nonzero -- + voluntary context switches. + For systems like NeXT and OSF/1 that don't set it, + also use the system CPU time. And page faults (I/O) for Linux. */ + r.ru_nvcsw = 0; + r.ru_stime.tv_sec = 0; + r.ru_stime.tv_usec = 0; + r.ru_majflt = r.ru_minflt = 0; + switch (fork ()) + { + case 0: /* Child. */ + sleep(1); /* Give up the CPU. */ + _exit(0); + break; + case -1: /* What can we do? */ + _exit(0); + break; + default: /* Parent. */ + wait3(&i, 0, &r); + /* Avoid "text file busy" from rm on fast HP-UX machines. */ + sleep(2); + return (r.ru_nvcsw == 0 && r.ru_majflt == 0 && r.ru_minflt == 0 + && r.ru_stime.tv_sec == 0 && r.ru_stime.tv_usec == 0); + } +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_wait3_rusage=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_wait3_rusage=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_wait3_rusage" >&5 +echo "${ECHO_T}$ac_cv_func_wait3_rusage" >&6; } +if test $ac_cv_func_wait3_rusage = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_WAIT3 1 +_ACEOF + +fi + + + + + + + + + + + + + + + + + + +for ac_func in alarm gethostbyname gethostname gettimeofday memset regcomp select socket strcasecmp strchr strerror strndup strrchr strstr strtol strtoul uname +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + +# Ugly stuff + +cat >>confdefs.h <<\_ACEOF +#define SYSV 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define SYSLOG_INET 1 +_ACEOF + + + +# Large file support +# Check whether --enable-largefile was given. +if test "${enable_largefile+set}" = set; then + enableval=$enable_largefile; case "${enableval}" in + yes) enable_largefile="yes" ;; + no) enable_largefile="no" ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-largefile" >&5 +echo "$as_me: error: bad value ${enableval} for --enable-largefile" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + enable_largefile="yes" + +fi + +if test "$enable_largefile" = "no"; then + +cat >>confdefs.h <<\_ACEOF +#define NOLARGEFILE 1 +_ACEOF + +fi + +# SQL support +# Check whether --enable-mysql was given. +if test "${enable_mysql+set}" = set; then + enableval=$enable_mysql; case "${enableval}" in + yes) enable_mysql="yes" ;; + no) enable_mysql="no" ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-mysql" >&5 +echo "$as_me: error: bad value ${enableval} for --enable-mysql" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + enable_mysql=no + +fi + +if test "$enable_mysql" = "yes"; then + # Extract the first word of "mysql_config", so it can be a program name with args. +set dummy mysql_config; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_MYSQL_CONFIG+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$MYSQL_CONFIG"; then + ac_cv_prog_MYSQL_CONFIG="$MYSQL_CONFIG" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_MYSQL_CONFIG="yes" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +MYSQL_CONFIG=$ac_cv_prog_MYSQL_CONFIG +if test -n "$MYSQL_CONFIG"; then + { echo "$as_me:$LINENO: result: $MYSQL_CONFIG" >&5 +echo "${ECHO_T}$MYSQL_CONFIG" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + if test x$MYSQL_CONFIG = xyes; then + +cat >>confdefs.h <<\_ACEOF +#define WITH_DB 1 +_ACEOF + + mysql_includes=`mysql_config --cflags` + mysql_libs=`mysql_config --libs` + else + enable_mysql=no + fi +fi + if test x$enable_mysql = xyes; then + enable_mysql_TRUE= + enable_mysql_FALSE='#' +else + enable_mysql_TRUE='#' + enable_mysql_FALSE= +fi + + + + +# Regular expressions +# Check whether --enable-regexp was given. +if test "${enable_regexp+set}" = set; then + enableval=$enable_regexp; case "${enableval}" in + yes) enable_regexp="yes" ;; + no) enable_regexp="no" ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-regexp" >&5 +echo "$as_me: error: bad value ${enableval} for --enable-regexp" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + enable_regexp=yes + +fi + +if test "$enable_regexp" = "yes"; then + +cat >>confdefs.h <<\_ACEOF +#define FEATURE_REGEXP 1 +_ACEOF + +fi + +# zlib compression +# Check whether --enable-zlib was given. +if test "${enable_zlib+set}" = set; then + enableval=$enable_zlib; case "${enableval}" in + yes) enable_zlib="yes" ;; + no) enable_zlib="no" ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-zlib" >&5 +echo "$as_me: error: bad value ${enableval} for --enable-zlib" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + enable_zlib=yes + +fi + +if test "$enable_zlib" = "yes"; then + if test "${ac_cv_header_zlib_h+set}" = set; then + { echo "$as_me:$LINENO: checking for zlib.h" >&5 +echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; } +if test "${ac_cv_header_zlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking zlib.h usability" >&5 +echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <zlib.h> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking zlib.h presence" >&5 +echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <zlib.h> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: zlib.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: zlib.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: zlib.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: zlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: zlib.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: zlib.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: zlib.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: zlib.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: zlib.h: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ----------------------------------------- ## +## Report this to rsyslog@lists.adiscon.com. ## +## ----------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for zlib.h" >&5 +echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; } +if test "${ac_cv_header_zlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_zlib_h=$ac_header_preproc +fi +{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; } + +fi +if test $ac_cv_header_zlib_h = yes; then + zlib_header="yes" +else + zlib_header="no" enable_zlib="false" +fi + + + if test "$zlib_header" = "yes"; then + { echo "$as_me:$LINENO: checking for deflate in -lz" >&5 +echo $ECHO_N "checking for deflate in -lz... $ECHO_C" >&6; } +if test "${ac_cv_lib_z_deflate+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lz $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char deflate (); +int +main () +{ +return deflate (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_lib_z_deflate=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_z_deflate=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_deflate" >&5 +echo "${ECHO_T}$ac_cv_lib_z_deflate" >&6; } +if test $ac_cv_lib_z_deflate = yes; then + +cat >>confdefs.h <<\_ACEOF +#define USE_NETZIP 1 +_ACEOF + + zlib_libs="-lz" + +else + enable_zlib="false" +fi + + fi +fi + +# multithreading via pthreads +# Check whether --enable-pthreads was given. +if test "${enable_pthreads+set}" = set; then + enableval=$enable_pthreads; case "${enableval}" in + yes) enable_pthreads="yes" ;; + no) enable_pthreads="no" ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-pthreads" >&5 +echo "$as_me: error: bad value ${enableval} for --enable-pthreads" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + enable_pthreads=yes + +fi + +if test "$enable_pthreads" = "yes"; then + +cat >>confdefs.h <<\_ACEOF +#define USE_PTHREADS 1 +_ACEOF + + pthreads_libs="-lpthread" + +fi + +# klogd +# Check whether --enable-klogd was given. +if test "${enable_klogd+set}" = set; then + enableval=$enable_klogd; case "${enableval}" in + yes) enable_klogd="yes" ;; + no) enable_klogd="no" ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-klogd" >&5 +echo "$as_me: error: bad value ${enableval} for --enable-klogd" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + enable_klogd="yes" + +fi + +if test "$enable_klogd" = "yes"; then + +cat >>confdefs.h <<\_ACEOF +#define FEATURE_KLOGD 1 +_ACEOF + +fi + +# debug +# Check whether --enable-debug was given. +if test "${enable_debug+set}" = set; then + enableval=$enable_debug; case "${enableval}" in + yes) enable_debug="yes" ;; + no) enable_debug="no" ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-debug" >&5 +echo "$as_me: error: bad value ${enableval} for --enable-debug" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + enable_debug="no" + +fi + +if test "$enable_debug" = "no"; then + +cat >>confdefs.h <<\_ACEOF +#define NDEBUG 1 +_ACEOF + +fi + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${enable_mysql_TRUE}" && test -z "${enable_mysql_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"enable_mysql\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"enable_mysql\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 + +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by rsyslog $as_me 1.16.0, which was +generated by GNU Autoconf 2.61. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to <bug-autoconf@gnu.org>." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +rsyslog config.status 1.16.0 +configured by $0, generated by GNU Autoconf 2.61, + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2006 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + { echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + CONFIG_SHELL=$SHELL + export CONFIG_SHELL + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +# +# Set up the sed scripts for CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "$CONFIG_FILES"; then + +_ACEOF + + + +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + cat >conf$$subs.sed <<_ACEOF +SHELL!$SHELL$ac_delim +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +PACKAGE_NAME!$PACKAGE_NAME$ac_delim +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +PACKAGE_STRING!$PACKAGE_STRING$ac_delim +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +exec_prefix!$exec_prefix$ac_delim +prefix!$prefix$ac_delim +program_transform_name!$program_transform_name$ac_delim +bindir!$bindir$ac_delim +sbindir!$sbindir$ac_delim +libexecdir!$libexecdir$ac_delim +datarootdir!$datarootdir$ac_delim +datadir!$datadir$ac_delim +sysconfdir!$sysconfdir$ac_delim +sharedstatedir!$sharedstatedir$ac_delim +localstatedir!$localstatedir$ac_delim +includedir!$includedir$ac_delim +oldincludedir!$oldincludedir$ac_delim +docdir!$docdir$ac_delim +infodir!$infodir$ac_delim +htmldir!$htmldir$ac_delim +dvidir!$dvidir$ac_delim +pdfdir!$pdfdir$ac_delim +psdir!$psdir$ac_delim +libdir!$libdir$ac_delim +localedir!$localedir$ac_delim +mandir!$mandir$ac_delim +DEFS!$DEFS$ac_delim +ECHO_C!$ECHO_C$ac_delim +ECHO_N!$ECHO_N$ac_delim +ECHO_T!$ECHO_T$ac_delim +LIBS!$LIBS$ac_delim +build_alias!$build_alias$ac_delim +host_alias!$host_alias$ac_delim +target_alias!$target_alias$ac_delim +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim +INSTALL_DATA!$INSTALL_DATA$ac_delim +am__isrc!$am__isrc$ac_delim +CYGPATH_W!$CYGPATH_W$ac_delim +PACKAGE!$PACKAGE$ac_delim +VERSION!$VERSION$ac_delim +ACLOCAL!$ACLOCAL$ac_delim +AUTOCONF!$AUTOCONF$ac_delim +AUTOMAKE!$AUTOMAKE$ac_delim +AUTOHEADER!$AUTOHEADER$ac_delim +MAKEINFO!$MAKEINFO$ac_delim +install_sh!$install_sh$ac_delim +STRIP!$STRIP$ac_delim +INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim +mkdir_p!$mkdir_p$ac_delim +AWK!$AWK$ac_delim +SET_MAKE!$SET_MAKE$ac_delim +am__leading_dot!$am__leading_dot$ac_delim +AMTAR!$AMTAR$ac_delim +am__tar!$am__tar$ac_delim +am__untar!$am__untar$ac_delim +CC!$CC$ac_delim +CFLAGS!$CFLAGS$ac_delim +LDFLAGS!$LDFLAGS$ac_delim +CPPFLAGS!$CPPFLAGS$ac_delim +ac_ct_CC!$ac_ct_CC$ac_delim +EXEEXT!$EXEEXT$ac_delim +OBJEXT!$OBJEXT$ac_delim +DEPDIR!$DEPDIR$ac_delim +am__include!$am__include$ac_delim +am__quote!$am__quote$ac_delim +AMDEP_TRUE!$AMDEP_TRUE$ac_delim +AMDEP_FALSE!$AMDEP_FALSE$ac_delim +AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim +CCDEPMODE!$CCDEPMODE$ac_delim +am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim +am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim +CPP!$CPP$ac_delim +GREP!$GREP$ac_delim +EGREP!$EGREP$ac_delim +LIBOBJS!$LIBOBJS$ac_delim +MYSQL_CONFIG!$MYSQL_CONFIG$ac_delim +enable_mysql_TRUE!$enable_mysql_TRUE$ac_delim +enable_mysql_FALSE!$enable_mysql_FALSE$ac_delim +mysql_includes!$mysql_includes$ac_delim +mysql_libs!$mysql_libs$ac_delim +zlib_libs!$zlib_libs$ac_delim +pthreads_libs!$pthreads_libs$ac_delim +LTLIBOBJS!$LTLIBOBJS$ac_delim +_ACEOF + + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 87; then + break + elif $ac_last_try; then + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi + +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS <conf$$subs.sed +rm -f conf$$subs.sed +cat >>$CONFIG_STATUS <<_ACEOF +:end +s/|#_!!_#|//g +CEOF$ac_eof +_ACEOF + + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF +fi # test -n "$CONFIG_FILES" + + +for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + ac_file_inputs="$ac_file_inputs $ac_f" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input="Generated from "`IFS=: + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + fi + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin";; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +case `sed -n '/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' $ac_file_inputs` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s&@configure_input@&$configure_input&;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out"; rm -f "$tmp/out";; + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac + ;; + :H) + # + # CONFIG_HEADER + # +_ACEOF + +# Transform confdefs.h into a sed script `conftest.defines', that +# substitutes the proper values into config.h.in to produce config.h. +rm -f conftest.defines conftest.tail +# First, append a space to every undef/define line, to ease matching. +echo 's/$/ /' >conftest.defines +# Then, protect against being on the right side of a sed subst, or in +# an unquoted here document, in config.status. If some macros were +# called several times there might be several #defines for the same +# symbol, which is useless. But do not sort them, since the last +# AC_DEFINE must be honored. +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where +# NAME is the cpp macro being defined, VALUE is the value it is being given. +# PARAMS is the parameter list in the macro definition--in most cases, it's +# just an empty string. +ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' +ac_dB='\\)[ (].*,\\1define\\2' +ac_dC=' ' +ac_dD=' ,' + +uniq confdefs.h | + sed -n ' + t rset + :rset + s/^[ ]*#[ ]*define[ ][ ]*// + t ok + d + :ok + s/[\\&,]/\\&/g + s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p + s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p + ' >>conftest.defines + +# Remove the space that was appended to ease matching. +# Then replace #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +# (The regexp can be short, since the line contains either #define or #undef.) +echo 's/ $// +s,^[ #]*u.*,/* & */,' >>conftest.defines + +# Break up conftest.defines: +ac_max_sed_lines=50 + +# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" +# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" +# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" +# et cetera. +ac_in='$ac_file_inputs' +ac_out='"$tmp/out1"' +ac_nxt='"$tmp/out2"' + +while : +do + # Write a here document: + cat >>$CONFIG_STATUS <<_ACEOF + # First, check the format of the line: + cat >"\$tmp/defines.sed" <<\\CEOF +/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def +/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def +b +:def +_ACEOF + sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF + sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS + ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in + sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail + grep . conftest.tail >/dev/null || break + rm -f conftest.defines + mv conftest.tail conftest.defines +done +rm -f conftest.defines conftest.tail + +echo "ac_result=$ac_in" >>$CONFIG_STATUS +cat >>$CONFIG_STATUS <<\_ACEOF + if test x"$ac_file" != x-; then + echo "/* $configure_input */" >"$tmp/config.h" + cat "$ac_result" >>"$tmp/config.h" + if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f $ac_file + mv "$tmp/config.h" $ac_file + fi + else + echo "/* $configure_input */" + cat "$ac_result" + fi + rm -f "$tmp/out12" +# Compute $ac_file's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $ac_file | $ac_file:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || +$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X$ac_file : 'X\(//\)[^/]' \| \ + X$ac_file : 'X\(//\)$' \| \ + X$ac_file : 'X\(/\)' \| . 2>/dev/null || +echo X$ac_file | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 +echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done + ;; + + esac +done # for ac_tag + + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + + +echo "****************************************************" +echo "rsyslog will be compiled with the followig settings:" +echo +echo "Multithreading support enabled: $enable_pthreads" +echo "Klogd functionality enabled: $enable_klogd" +echo "Regular expressions support enabled: $enable_regexp" +echo "Zlib compression support enabled: $enable_zlib" +echo "MySql support enabled: $enable_mysql" +echo "Large file support enabled: $enable_largefile" +echo "Debug mode enabled: $enable_debug" + diff --git a/configure.ac b/configure.ac new file mode 100644 index 00000000..b242f8b2 --- /dev/null +++ b/configure.ac @@ -0,0 +1,179 @@ +# -*- Autoconf -*- +# Process this file with autoconf to produce a configure script. + +AC_PREREQ(2.61) +AC_INIT(rsyslog, 1.16.0, rsyslog@lists.adiscon.com.) +AM_INIT_AUTOMAKE(rsyslog, 1.16.0) +AC_CONFIG_SRCDIR([syslogd.c]) +AC_CONFIG_HEADER([config.h]) + +# Checks for programs. +AC_PROG_CC +AM_PROG_CC_C_O + +# Checks for libraries. + +# Checks for header files. +AC_HEADER_RESOLV +AC_HEADER_STDC +AC_HEADER_SYS_WAIT +AC_CHECK_HEADERS([arpa/inet.h fcntl.h locale.h netdb.h netinet/in.h paths.h stdio_ext.h stdlib.h string.h sys/file.h sys/ioctl.h sys/param.h sys/socket.h sys/time.h syslog.h unistd.h utmp.h]) + +# Checks for typedefs, structures, and compiler characteristics. +AC_C_CONST +AC_TYPE_OFF_T +AC_TYPE_PID_T +AC_TYPE_SIZE_T +AC_TYPE_SSIZE_T +AC_HEADER_TIME +AC_STRUCT_TM +AC_C_VOLATILE + +# Checks for library functions. +AC_FUNC_FORK +AC_PROG_GCC_TRADITIONAL +AC_FUNC_MALLOC +AC_FUNC_REALLOC +AC_FUNC_SELECT_ARGTYPES +AC_TYPE_SIGNAL +AC_FUNC_STAT +AC_FUNC_VPRINTF +AC_FUNC_WAIT3 +AC_CHECK_FUNCS([alarm gethostbyname gethostname gettimeofday memset regcomp select socket strcasecmp strchr strerror strndup strrchr strstr strtol strtoul uname]) + + +# Ugly stuff +AC_DEFINE(SYSV, 1, [I'd like to get rid of this.]) +AC_DEFINE(SYSLOG_INET, 1, [Why there is this macro]) + + +# Large file support +AC_ARG_ENABLE(largefile, + [AC_HELP_STRING([--enable-largefile],[Enable large file support @<:@default=yes@:>@])], + [case "${enableval}" in + yes) enable_largefile="yes" ;; + no) enable_largefile="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-largefile) ;; + esac], + [enable_largefile="yes"] +) +if test "$enable_largefile" = "no"; then + AC_DEFINE(NOLARGEFILE, 1, [Defined when large file support is disabled.]) +fi + +# SQL support +AC_ARG_ENABLE(mysql, + [AC_HELP_STRING([--enable-mysql],[Enable MySql database support @<:@default=no@:>@])], + [case "${enableval}" in + yes) enable_mysql="yes" ;; + no) enable_mysql="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-mysql) ;; + esac], + [enable_mysql=no] +) +if test "$enable_mysql" = "yes"; then + AC_CHECK_PROG(MYSQL_CONFIG, mysql_config, yes) + if test x$MYSQL_CONFIG = xyes; then + AC_DEFINE(WITH_DB, 1, [MySql database support enabled]) + mysql_includes=`mysql_config --cflags` + mysql_libs=`mysql_config --libs` + else + enable_mysql=no + fi +fi +AM_CONDITIONAL(enable_mysql, test x$enable_mysql = xyes) +AC_SUBST(mysql_includes) +AC_SUBST(mysql_libs) + +# Regular expressions +AC_ARG_ENABLE(regexp, + [AC_HELP_STRING([--enable-regexp],[Enable regular expressions support @<:@default=yes@:>@])], + [case "${enableval}" in + yes) enable_regexp="yes" ;; + no) enable_regexp="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-regexp) ;; + esac], + [enable_regexp=yes] +) +if test "$enable_regexp" = "yes"; then + AC_DEFINE(FEATURE_REGEXP, 1, [Regular expressions support enabled.]) +fi + +# zlib compression +AC_ARG_ENABLE(zlib, + [AC_HELP_STRING([--enable-zlib],[Enable zlib compression support @<:@default=yes@:>@])], + [case "${enableval}" in + yes) enable_zlib="yes" ;; + no) enable_zlib="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-zlib) ;; + esac], + [enable_zlib=yes] +) +if test "$enable_zlib" = "yes"; then + AC_CHECK_HEADER(zlib.h, [zlib_header="yes"], [zlib_header="no" enable_zlib="false"]) + if test "$zlib_header" = "yes"; then + AC_CHECK_LIB(z, deflate, + [AC_DEFINE(USE_NETZIP, 1, [Define if you want to enable zlib support]) + zlib_libs="-lz" + AC_SUBST(zlib_libs)], enable_zlib="false") + fi +fi + +# multithreading via pthreads +AC_ARG_ENABLE(pthreads, + [AC_HELP_STRING([--enable-pthreads],[Enable multithreading via pthreads @<:@default=yes@:>@])], + [case "${enableval}" in + yes) enable_pthreads="yes" ;; + no) enable_pthreads="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-pthreads) ;; + esac], + [enable_pthreads=yes] +) +if test "$enable_pthreads" = "yes"; then + AC_DEFINE(USE_PTHREADS, 1, [Multithreading support enabled.]) + pthreads_libs="-lpthread" + AC_SUBST(pthreads_libs) +fi + +# klogd +AC_ARG_ENABLE(klogd, + [AC_HELP_STRING([--enable-klogd],[Integrated klogd functionality @<:@default=yes@:>@])], + [case "${enableval}" in + yes) enable_klogd="yes" ;; + no) enable_klogd="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-klogd) ;; + esac], + [enable_klogd="yes"] +) +if test "$enable_klogd" = "yes"; then + AC_DEFINE(FEATURE_KLOGD, 1, [klogd functionality is integrated.]) +fi + +# debug +AC_ARG_ENABLE(debug, + [AC_HELP_STRING([--enable-debug],[Enable debug mode @<:@default=no@:>@])], + [case "${enableval}" in + yes) enable_debug="yes" ;; + no) enable_debug="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-debug) ;; + esac], + [enable_debug="no"] +) +if test "$enable_debug" = "no"; then + AC_DEFINE(NDEBUG, 1, [Defined if debug mode is disabled.]) +fi + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT + +echo "****************************************************" +echo "rsyslog will be compiled with the followig settings:" +echo +echo "Multithreading support enabled: $enable_pthreads" +echo "Klogd functionality enabled: $enable_klogd" +echo "Regular expressions support enabled: $enable_regexp" +echo "Zlib compression support enabled: $enable_zlib" +echo "MySql support enabled: $enable_mysql" +echo "Large file support enabled: $enable_largefile" +echo "Debug mode enabled: $enable_debug" + diff --git a/depcomp b/depcomp new file mode 100755 index 00000000..ca5ea4e1 --- /dev/null +++ b/depcomp @@ -0,0 +1,584 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2006-10-15.18 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software +# Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/install-sh b/install-sh new file mode 100755 index 00000000..4fbbae7b --- /dev/null +++ b/install-sh @@ -0,0 +1,507 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2006-10-14.15 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +posix_glob= +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chmodcmd=$chmodprog +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + shift + shift + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac +done + +if test $# -ne 0 && test -z "$dir_arg$dstarg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix=/ ;; + -*) prefix=./ ;; + *) prefix= ;; + esac + + case $posix_glob in + '') + if (set -f) 2>/dev/null; then + posix_glob=true + else + posix_glob=false + fi ;; + esac + + oIFS=$IFS + IFS=/ + $posix_glob && set -f + set fnord $dstdir + shift + $posix_glob && set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dst"; then + $doit $rmcmd -f "$dst" 2>/dev/null \ + || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ + && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ + || { + echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + } || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/missing b/missing new file mode 100755 index 00000000..1c8ff704 --- /dev/null +++ b/missing @@ -0,0 +1,367 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2006-05-10.23 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. +# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to <bug-automake@gnu.org>." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). +case $1 in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $1 in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG="\${$#}" + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + tar) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case $firstarg in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case $firstarg in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: @@ -137,11 +137,12 @@ #define MAXLINE 2048 /* maximum line length */ #define DEFUPRI (LOG_USER|LOG_NOTICE) #define DEFSPRI (LOG_KERN|LOG_CRIT) -//#define TIMERINTVL 30 /* interval for checking flush, mark */ -#define TIMERINTVL 20 /* interval for checking flush, mark */ +#define TIMERINTVL 30 /* interval for checking flush, mark */ #define CONT_LINE 1 /* Allow continuation lines */ +#include "config.h" + #ifdef MTRACE #include <mcheck.h> #endif @@ -196,7 +197,6 @@ #ifndef TESTING #include "pidfile.h" #endif -#include "version.h" #include <assert.h> @@ -7020,8 +7020,8 @@ static void die(int sig) if (sig) { dprintf(" exiting on signal %d\n", sig); (void) snprintf(buf, sizeof(buf) / sizeof(char), - " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION "." \ - PATCHLEVEL "\" x-pid=\"%d\"]" " exiting on signal %d.", + " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ + "\" x-pid=\"%d\"]" " exiting on signal %d.", (int) myPid, sig); errno = 0; logmsgInternal(LOG_SYSLOG|LOG_INFO, buf, LocalHostName, ADDDATE); @@ -7780,8 +7780,8 @@ static void init() * rgerhards, 2005-08-17 */ snprintf(bufStartUpMsg, sizeof(bufStartUpMsg)/sizeof(char), - " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION "." \ - PATCHLEVEL "\" x-pid=\"%d\"][x-configInfo udpReception=\"%s\" " \ + " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION \ + "\" x-pid=\"%d\"][x-configInfo udpReception=\"%s\" " \ "udpPort=\"%s\" tcpReception=\"%s\" tcpPort=\"%s\"]" \ " restart", (int) myPid, @@ -9719,7 +9719,7 @@ int main(int argc, char **argv) bParseHOSTNAMEandTAG = 0; break; case 'v': - printf("rsyslogd %s.%s, ", VERSION, PATCHLEVEL); + printf("rsyslogd %s, ", VERSION); printf("compiled with:\n"); #ifdef USE_PTHREADS printf("\tFEATURE_PTHREADS (dual-threading)\n"); |