diff options
257 files changed, 12339 insertions, 2929 deletions
@@ -35,3 +35,5 @@ log logfile debug core.* +shave +shave-libtool @@ -1,4 +1,254 @@ --------------------------------------------------------------------------- +Version 4.4.2 [v4-stable] (rgerhards), 2009-10-09 +- bugfix: invalid handling of zero-sized messages, could lead to mis- + addressing and potential memory corruption/segfault +- bugfix: zero-sized UDP messages are no longer processed + until now, they were forwarded to processing, but this makes no sense + Also, it looks like the system seems to provide a zero return code + on a UDP recvfrom() from time to time for some internal reasons. These + "receives" are now silently ignored. +- bugfix: random data could be appended to message, possibly causing + segfaults +- bugfix: reverse lookup reduction logic in imudp do DNS queries too often + A comparison was done between the current and the former source address. + However, this was done on the full sockaddr_storage structure and not + on the host address only. This has now been changed for IPv4 and IPv6. + The end result of this bug could be a higher UDP message loss rate than + necessary (note that UDP message loss can not totally be avoided due + to the UDP spec) +--------------------------------------------------------------------------- +Version 4.4.1 [v4-stable] (rgerhards), 2009-09-02 +- features requiring Java are automatically disabled if Java is not + present (thanks to Michael Biebl for his help!) +- bugfix: invalid double-quoted PRI, among others in outgoing messages + This causes grief with all receivers. + Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=147 +- bugfix: Java testing tools were required, even if testbench was disabled + This resulted in build errors if no Java was present on the build system, + even though none of the selected option actually required Java. + (I forgot to backport a similar fix to newer releases). +- bugfix (backport): omfwd segfault + Note that the orginal (higher version) patch states this happens only + when debugging mode is turned on. That statement is wrong: if debug + mode is turned off, the message is not being emitted, but the division + by zero in the actual parameters still happens. +--------------------------------------------------------------------------- +Version 4.4.0 [v4-stable] (rgerhards), 2009-08-21 +- bugfix: stderr/stdout were not closed to be able to emit error messages, + but this caused ssh sessions to hang. Now we close them after the + initial initialization. See forum thread: + http://kb.monitorware.com/controlling-terminal-issues-t9875.html +- bugfix: sending syslog messages with zip compression did not work +--------------------------------------------------------------------------- +Version 4.3.2 [v4-beta] (rgerhards), 2009-06-24 +- removed long-obsoleted property UxTradMsg +- added a generic network stream server (in addition to rather specific + syslog tcp server) +- added ability for the UDP output action to rebind its send socket after + sending n messages. New config directive $ActionSendUDPRebindInterval + added for the purpose. By default, rebinding is disabled. This is + considered useful for load balancers. +- bugfix: imdiag/imtcp had a race condition +- improved testbench (now much better code design and reuse) +- added config switch --enable-testbench=no to turn off testbench +--------------------------------------------------------------------------- +Version 4.3.1 [DEVEL] (rgerhards), 2009-05-25 +- added capability to run multiple tcp listeners (on different ports) +- performance enhancement: imtcp calls parser no longer on input thread + but rather inside on of the potentially many main msg queue worker + threads (an enhancement scheduled for all input plugins where this is + possible) +- added $GenerateConfigGraph configuration command which can be used + to generate nice-looking (and very informative) rsyslog configuration + graphs. +- added $ActionName configuration directive (currently only used for + graph generation, but may find other uses) +- improved doc + * added (hopefully) easier to grasp queue explanation +- improved testbench + * added tests for queue disk-only mode (checks disk queue logic) +- bugfix: light and full delay watermarks had invalid values, badly + affecting performance for delayable inputs +- build system improvements - thanks to Michael Biebl +- added new testing module imdiag, which enables to talk to the + rsyslog core at runtime. The current implementation is only a + beginning, but can be expanded over time +--------------------------------------------------------------------------- +Version 4.3.0 [DEVEL] (rgerhards), 2009-04-17 +- new feature: new output plugin omprog, which permits to start program + and feed it (via its stdin) with syslog messages. If the program + terminates, it is restarted. +- improved internal handling of RainerScript functions, building the + necessary plumbing to support more functions with decent runtime + performance. This is also necessary towards the long-term goal + of loadable library modules. +- added new RainerScript function "tolower" +- improved testbench + * added tests for tcp-based reception + * added tcp-load test (1000 connections, 20,000 messages) +- added $MaxOpenFiles configuration directive +- bugfix: solved potential memory leak in msg processing, could manifest + itself in imtcp +- bugfix: ompgsql did not detect problems in sql command execution + this could cause loss of messages. The handling was correct if the + connection broke, but not if there was a problem with statement + execution. The most probable case for such a case would be invalid + sql inside the template, and this is now much easier to diagnose. +--------------------------------------------------------------------------- +Version 4.2.0 [v4-stable] (rgerhards), 2009-06-23 +- bugfix: light and full delay watermarks had invalid values, badly + affecting performance for delayable inputs +- imported all patches from 3.22.1 as of today (see below) +- bugfix: compile problems in im3195 +--------------------------------------------------------------------------- +Version 4.1.7 [BETA] (rgerhards), 2009-04-22 +- bugfix: $InputTCPMaxSessions config directive was accepted, but not + honored. This resulted in a fixed upper limit of 200 connections. +- bugfix: the default for $DirCreateMode was 0644, and as such wrong. + It has now been changed to 0700. For some background, please see + http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html +- bugfix: ompgsql did not detect problems in sql command execution + this could cause loss of messages. The handling was correct if the + connection broke, but not if there was a problem with statement + execution. The most probable case for such a case would be invalid + sql inside the template, and this is now much easier to diagnose. +--------------------------------------------------------------------------- +Version 4.1.6 [DEVEL] (rgerhards), 2009-04-07 +- added new "csv" property replacer options to enable simple creation + of CSV-formatted outputs (format from RFC4180 is used) +- implemented function support in RainerScript. That means the engine + parses and compile functions, as well as executes a few build-in + ones. Dynamic loading and registration of functions is not yet + supported - but we now have a good foundation to do that later on. +- implemented the strlen() RainerScript function +- added a template output module +- added -T rsyslogd command line option, enables to specify a directory + where to chroot() into on startup. This is NOT a security feature but + introduced to support testing. Thus, -T does not make sure chroot() + is used in a secure way. (may be removed later) +- added omstdout module for testing purposes. Spits out all messages to + stdout - no config option, no other features +- added a parser testing suite (still needs to be extended, but a good + start) +- modified $ModLoad statement so that for modules whom's name starts with + a dot, no path is prepended (this enables relative-pathes and should + not break any valid current config) +- fixed a bug that caused action retries not to work correctly + situation was only cleared by a restart +- bugfix: closed dynafile was potentially never written until another + dynafile name was generated - potential loss of messages +- improved omfile so that it properly suspends itself if there is an + i/o or file name generation error. This enables it to be used with + the full high availability features of rsyslog's engine +- bugfix: fixed some segaults on Solaris, where vsprintf() does not + check for NULL pointers +- improved performance of regexp-based filters + Thanks to Arnaud Cornet for providing the idea and initial patch. +- added a new way how output plugins may be passed parameters. This is + more effcient for some outputs. They new can receive fields not only + as a single string but rather in an array where each string is seperated. +- added (some) developer documentation for output plugin interface +- bugfix: potential abort with DA queue after high watermark is reached + There exists a race condition that can lead to a segfault. Thanks + go to vbernetr, who performed the analysis and provided patch, which + I only tweaked a very little bit. +- bugfix: imtcp did incorrectly parse hostname/tag + Thanks to Luis Fernando Muñoz MejÃas for the patch. +--------------------------------------------------------------------------- +Version 4.1.5 [DEVEL] (rgerhards), 2009-03-11 +- bugfix: parser did not correctly parse fields in UDP-received messages +- added ERE support in filter conditions + new comparison operation "ereregex" +- added new config directive $RepeatedMsgContainsOriginalMsg so that the + "last message repeated n times" messages, if generated, may + have an alternate format that contains the message that is being repeated +--------------------------------------------------------------------------- +Version 4.1.4 [DEVEL] (rgerhards), 2009-01-29 +- bugfix: inconsistent use of mutex/atomic operations could cause segfault + details are too many, for full analysis see blog post at: + http://blog.gerhards.net/2009/01/rsyslog-data-race-analysis.html +- bugfix: unitialized mutex was used in msg.c:getPRI + This was subtle, because getPRI is called as part of the debugging code + (always executed) in syslogd.c:logmsg. +- bufgix: $PreserveFQDN was not properly handled for locally emitted + messages +--------------------------------------------------------------------------- +Version 4.1.3 [DEVEL] (rgerhards), 2008-12-17 +- added $InputTCPServerAddtlFrameDelimiter config directive, which + enables to specify an additional, non-standard message delimiter + for processing plain tcp syslog. This is primarily a fix for the invalid + framing used in Juniper's NetScreen products. Credit to forum user + Arv for suggesting this solution. +- added $InputTCPServerInputName property, which enables a name to be + specified that will be available during message processing in the + inputname property. This is considered useful for logic that treats + messages differently depending on which input received them. +- added $PreserveFQDN config file directive + Enables to use FQDNs in sender names where the legacy default + would have stripped the domain part. + Thanks to BlinkMind, Inc. http://www.blinkmind.com for sponsoring this + development. +- bugfix: imudp went into an endless loop under some circumstances + (but could also leave it under some other circumstances...) + Thanks to David Lang and speedfox for reporting this issue. +--------------------------------------------------------------------------- +Version 4.1.2 [DEVEL] (rgerhards), 2008-12-04 +- bugfix: code did not compile without zlib +- security bugfix: $AllowedSender was not honored, all senders were + permitted instead (see http://www.rsyslog.com/Article322.phtml) +- security fix: imudp emitted a message when a non-permitted sender + tried to send a message to it. This behaviour is operator-configurable. + If enabled, a message was emitted each time. That way an attacker could + effectively fill the disk via this facility. The message is now + emitted only once in a minute (this currently is a hard-coded limit, + if someone comes up with a good reason to make it configurable, we + will probably do that). +- doc bugfix: typo in v3 compatibility document directive syntax + thanks to Andrej for reporting +- imported other changes from 3.21.8 and 3.20.1 (see there) +--------------------------------------------------------------------------- +Version 4.1.1 [DEVEL] (rgerhards), 2008-11-26 +- added $PrivDropToGroup, $PrivDropToUser, $PrivDropToGroupID, + $PrivDropToUserID config directives to enable dropping privileges. + This is an effort to provide a security enhancement. For the limits of this + approach, see http://wiki.rsyslog.com/index.php/Security +- re-enabled imklog to compile on FreeBSD (brought in from beta) +--------------------------------------------------------------------------- +Version 4.1.0 [DEVEL] (rgerhards), 2008-11-18 + +********************************* WARNING ********************************* +This version has a slightly different on-disk format for message entries. +As a consequence, old queue files being read by this version may have +an invalid output timestamp, which could result to some malfunction inside +the output driver. It is recommended to drain queues with the previous +version before switching to this one. +********************************* WARNING ********************************* + +- greatly enhanced performance when compared to v3. +- added configuration directive "HUPisRestart" which enables to configure + HUP to be either a full restart or "just" a leightweight way to + close open files. +- enhanced legacy syslog parser to detect year if part of the timestamp + the format is based on what Cisco devices seem to emit. +- added a setting "$OptimizeForUniprocessor" to enable users to turn off + pthread_yield calls which are counter-productive on multiprocessor + machines (but have been shown to be useful on uniprocessors) +- reordered imudp processing. Message parsing is now done as part of main + message queue worker processing (was part of the input thread) + This should also improve performance, as potentially more work is + done in parallel. +- bugfix: compressed syslog messages could be slightly mis-uncompressed + if the last byte of the compressed record was a NUL +- added $UDPServerTimeRequery option which enables to work with + less acurate timestamps in favor of performance. This enables querying + of the time only every n-th time if imudp is running in the tight + receive loop (aka receiving messsages at a high rate) +- doc bugfix: queue doc had wrong parameter name for setting controlling + worker thread shutdown period +- restructured rsyslog.conf documentation +- bugfix: memory leak in ompgsql + Thanks to Ken for providing the patch +--------------------------------------------------------------------------- Version 3.22.2 [v3-stable] (rgerhards), 2009-07-?? - enhance: imrelp now also provides remote peer's IP address [if librelp != 1.0.0 is used] @@ -96,9 +346,12 @@ Version 3.21.6 [DEVEL] (rgerhards), 2008-10-22 - bugfix: solved a segfault condition - bugfix: subsecond time properties generated by imfile, imklog and internal messages could be slightly inconsistent +- bugfix: (potentially big) memory leak on HUP if queues could not be + drained before timeout - thanks to David Lang for pointing this out - added capability to support multiple module search pathes. Thank to Marius Tomaschewski for providing the patch. - bugfix: im3195 did no longer compile +- improved "make distcheck" by ensuring everything relevant is recompiled --------------------------------------------------------------------------- Version 3.21.5 [DEVEL] (rgerhards), 2008-09-30 - performance optimization: unnecessary time() calls during message diff --git a/Makefile.am b/Makefile.am index d783a30e..a050e95e 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,7 +1,6 @@ sbin_PROGRAMS = pkglib_LTLIBRARIES = - if ENABLE_INET pkglib_LTLIBRARIES += lmtcpsrv.la lmtcpclt.la # @@ -84,10 +83,22 @@ if ENABLE_SNMP SUBDIRS += plugins/omsnmp endif +if ENABLE_CUST1 +SUBDIRS += plugins/cust1 +endif + if ENABLE_IMTEMPLATE SUBDIRS += plugins/imtemplate endif +if ENABLE_OMSTDOUT +SUBDIRS += plugins/omstdout +endif + +if ENABLE_OMTEMPLATE +SUBDIRS += plugins/omtemplate +endif + if ENABLE_IMFILE SUBDIRS += plugins/imfile endif @@ -100,12 +111,28 @@ if ENABLE_MAIL SUBDIRS += plugins/ommail endif +if ENABLE_OMPROG +SUBDIRS += plugins/omprog +endif + if ENABLE_RFC3195 SUBDIRS += plugins/im3195 endif +if ENABLE_ORACLE +SUBDIRS += plugins/omoracle +endif + # tests are added as last element, because tests may need different # modules that need to be generated first SUBDIRS += tests + +# make sure "make distcheck" tries to build all modules. This means that +# a developer must always have an environment where every supporting library +# is available. If that is not the case, the respective configure option may +# temporarily be removed below. The intent behind forcing everthing to compile +# in a make distcheck is so that we detect code that accidently was not updated +# when some global update happened. +DISTCHECK_CONFIGURE_FLAGS=--enable-gssapi_krb5 --enable-imfile --enable-snmp --enable-pgsql --enable-libdbi --enable-mysql --enable-omtemplate --enable-imtemplate --enable-relp --enable-rsyslogd --enable-mail --enable-klog --enable-diagtools --enable-gnutls --enable-omstdout --enable-omprog --enable-imdiag --enable-shave ACLOCAL_AMFLAGS = -I m4 @@ -58,7 +58,9 @@ static int iActExecEveryNthOccur = 0; /* execute action every n-th occurence (0, static time_t iActExecEveryNthOccurTO = 0; /* timeout for n-occurence setting (in seconds, 0=never) */ static int glbliActionResumeInterval = 30; int glbliActionResumeRetryCount = 0; /* how often should suspended actions be retried? */ +static int bActionRepMsgHasMsg = 0; /* last messsage repeated... has msg fragment in it */ +static uchar *pszActionName; /* short name for the action */ /* main message queue and its configuration parameters */ static queueType_t ActionQueType = QUEUETYPE_DIRECT; /* type of the main message queue above */ static int iActionQueueSize = 1000; /* size of the main message queue above */ @@ -162,8 +164,7 @@ actionResetQueueParams(void) glbliActionResumeRetryCount = 0; /* I guess it is smart to reset this one, too */ - if(pszActionQFName != NULL) - d_free(pszActionQFName); + d_free(pszActionQFName); pszActionQFName = NULL; /* prefix for the main message queue file */ RETiRet; @@ -179,7 +180,7 @@ rsRetVal actionDestruct(action_t *pThis) ASSERT(pThis != NULL); if(pThis->pQueue != NULL) { - queueDestruct(&pThis->pQueue); + qqueueDestruct(&pThis->pQueue); } if(pThis->pMod != NULL) @@ -190,8 +191,8 @@ rsRetVal actionDestruct(action_t *pThis) SYNC_OBJ_TOOL_EXIT(pThis); pthread_mutex_destroy(&pThis->mutActExec); - if(pThis->ppTpl != NULL) - d_free(pThis->ppTpl); + d_free(pThis->pszName); + d_free(pThis->ppTpl); d_free(pThis); RETiRet; @@ -254,7 +255,7 @@ actionConstructFinalize(action_t *pThis) * to be run on multiple threads. So far, this is forbidden by the interface * spec. -- rgerhards, 2008-01-30 */ - CHKiRet(queueConstruct(&pThis->pQueue, ActionQueType, 1, iActionQueueSize, (rsRetVal (*)(void*,void*))actionCallDoAction)); + CHKiRet(qqueueConstruct(&pThis->pQueue, ActionQueType, 1, iActionQueueSize, (rsRetVal (*)(void*,void*))actionCallDoAction)); obj.SetName((obj_t*) pThis->pQueue, pszQName); /* ... set some properties ... */ @@ -267,24 +268,24 @@ actionConstructFinalize(action_t *pThis) errmsg.LogError(0, NO_ERRCODE, "Invalid " #directive ", error %d. Ignored, running with default setting", iRet); \ } - queueSetpUsr(pThis->pQueue, pThis); - setQPROP(queueSetsizeOnDiskMax, "$ActionQueueMaxDiskSpace", iActionQueMaxDiskSpace); - setQPROP(queueSetMaxFileSize, "$ActionQueueFileSize", iActionQueMaxFileSize); - setQPROPstr(queueSetFilePrefix, "$ActionQueueFileName", pszActionQFName); - setQPROP(queueSetiPersistUpdCnt, "$ActionQueueCheckpointInterval", iActionQPersistUpdCnt); - setQPROP(queueSettoQShutdown, "$ActionQueueTimeoutShutdown", iActionQtoQShutdown ); - setQPROP(queueSettoActShutdown, "$ActionQueueTimeoutActionCompletion", iActionQtoActShutdown); - setQPROP(queueSettoWrkShutdown, "$ActionQueueWorkerTimeoutThreadShutdown", iActionQtoWrkShutdown); - setQPROP(queueSettoEnq, "$ActionQueueTimeoutEnqueue", iActionQtoEnq); - setQPROP(queueSetiHighWtrMrk, "$ActionQueueHighWaterMark", iActionQHighWtrMark); - setQPROP(queueSetiLowWtrMrk, "$ActionQueueLowWaterMark", iActionQLowWtrMark); - setQPROP(queueSetiDiscardMrk, "$ActionQueueDiscardMark", iActionQDiscardMark); - setQPROP(queueSetiDiscardSeverity, "$ActionQueueDiscardSeverity", iActionQDiscardSeverity); - setQPROP(queueSetiMinMsgsPerWrkr, "$ActionQueueWorkerThreadMinimumMessages", iActionQWrkMinMsgs); - setQPROP(queueSetbSaveOnShutdown, "$ActionQueueSaveOnShutdown", bActionQSaveOnShutdown); - setQPROP(queueSetiDeqSlowdown, "$ActionQueueDequeueSlowdown", iActionQueueDeqSlowdown); - setQPROP(queueSetiDeqtWinFromHr, "$ActionQueueDequeueTimeBegin", iActionQueueDeqtWinFromHr); - setQPROP(queueSetiDeqtWinToHr, "$ActionQueueDequeueTimeEnd", iActionQueueDeqtWinToHr); + qqueueSetpUsr(pThis->pQueue, pThis); + setQPROP(qqueueSetsizeOnDiskMax, "$ActionQueueMaxDiskSpace", iActionQueMaxDiskSpace); + setQPROP(qqueueSetMaxFileSize, "$ActionQueueFileSize", iActionQueMaxFileSize); + setQPROPstr(qqueueSetFilePrefix, "$ActionQueueFileName", pszActionQFName); + setQPROP(qqueueSetiPersistUpdCnt, "$ActionQueueCheckpointInterval", iActionQPersistUpdCnt); + setQPROP(qqueueSettoQShutdown, "$ActionQueueTimeoutShutdown", iActionQtoQShutdown ); + setQPROP(qqueueSettoActShutdown, "$ActionQueueTimeoutActionCompletion", iActionQtoActShutdown); + setQPROP(qqueueSettoWrkShutdown, "$ActionQueueWorkerTimeoutThreadShutdown", iActionQtoWrkShutdown); + setQPROP(qqueueSettoEnq, "$ActionQueueTimeoutEnqueue", iActionQtoEnq); + setQPROP(qqueueSetiHighWtrMrk, "$ActionQueueHighWaterMark", iActionQHighWtrMark); + setQPROP(qqueueSetiLowWtrMrk, "$ActionQueueLowWaterMark", iActionQLowWtrMark); + setQPROP(qqueueSetiDiscardMrk, "$ActionQueueDiscardMark", iActionQDiscardMark); + setQPROP(qqueueSetiDiscardSeverity, "$ActionQueueDiscardSeverity", iActionQDiscardSeverity); + setQPROP(qqueueSetiMinMsgsPerWrkr, "$ActionQueueWorkerThreadMinimumMessages", iActionQWrkMinMsgs); + setQPROP(qqueueSetbSaveOnShutdown, "$ActionQueueSaveOnShutdown", bActionQSaveOnShutdown); + setQPROP(qqueueSetiDeqSlowdown, "$ActionQueueDequeueSlowdown", iActionQueueDeqSlowdown); + setQPROP(qqueueSetiDeqtWinFromHr, "$ActionQueueDequeueTimeBegin", iActionQueueDeqtWinFromHr); + setQPROP(qqueueSetiDeqtWinToHr, "$ActionQueueDequeueTimeEnd", iActionQueueDeqtWinToHr); # undef setQPROP # undef setQPROPstr @@ -293,7 +294,7 @@ actionConstructFinalize(action_t *pThis) bActionQSaveOnShutdown, iActionQueMaxDiskSpace); - CHKiRet(queueStart(pThis->pQueue)); + CHKiRet(qqueueStart(pThis->pQueue)); dbgprintf("Action %p: queue %p created\n", pThis, pThis->pQueue); /* and now reset the queue params (see comment in its function header!) */ @@ -352,7 +353,13 @@ static rsRetVal actionTryResume(action_t *pThis) ASSERT(pThis != NULL); - ttNow = getActNow(pThis); /* cache "now" */ + /* for resume handling, we must always obtain a fresh timestamp. We used + * to use the action timestamp, but in this case we will never reach a + * point where a resumption is actually tried, because the action timestamp + * is always in the past. So we can not avoid doing a fresh time() call + * here. -- rgerhards, 2009-03-18 + */ + time(&ttNow); /* cache "now" */ /* first check if it is time for a re-try */ if(ttNow > pThis->ttResumeRtry) { @@ -418,6 +425,7 @@ actionCallDoAction(action_t *pAction, msg_t *pMsg) DEFiRet; int iRetries; int i; + int iArr; int iSleepPeriod; int bCallAction; int iCancelStateSave; @@ -432,7 +440,15 @@ actionCallDoAction(action_t *pAction, msg_t *pMsg) /* here we must loop to process all requested strings */ for(i = 0 ; i < pAction->iNumTpls ; ++i) { - CHKiRet(tplToString(pAction->ppTpl[i], pMsg, &(ppMsgs[i]))); + switch(pAction->eParamPassing) { + case ACT_STRING_PASSING: + CHKiRet(tplToString(pAction->ppTpl[i], pMsg, &(ppMsgs[i]))); + break; + case ACT_ARRAY_PASSING: + CHKiRet(tplToArray(pAction->ppTpl[i], pMsg, (uchar***) &(ppMsgs[i]))); + break; + default:assert(0); /* software bug if this happens! */ + } } iRetries = 0; /* We now must guard the output module against execution by multiple threads. The @@ -488,7 +504,19 @@ finalize_it: /* cleanup */ for(i = 0 ; i < pAction->iNumTpls ; ++i) { if(ppMsgs[i] != NULL) { - d_free(ppMsgs[i]); + switch(pAction->eParamPassing) { + case ACT_ARRAY_PASSING: + iArr = 0; + while(((char **)ppMsgs[i])[iArr] != NULL) + d_free(((char **)ppMsgs[i])[iArr++]); + d_free(ppMsgs[i]); + break; + case ACT_STRING_PASSING: + d_free(ppMsgs[i]); + break; + default: + assert(0); + } } } d_free(ppMsgs); @@ -498,6 +526,39 @@ finalize_it: } #pragma GCC diagnostic warning "-Wempty-body" + +/* call the HUP handler for a given action, if such a handler is defined. The + * action mutex is locked, because the HUP handler most probably needs to modify + * some internal state information. + * rgerhards, 2008-10-22 + */ +#pragma GCC diagnostic ignored "-Wempty-body" +rsRetVal +actionCallHUPHdlr(action_t *pAction) +{ + DEFiRet; + int iCancelStateSave; + + ASSERT(pAction != NULL); + DBGPRINTF("Action %p checks HUP hdlr: %p\n", pAction, pAction->pMod->doHUP); + + if(pAction->pMod->doHUP == NULL) { + FINALIZE; /* no HUP handler, so we are done ;) */ + } + + pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &iCancelStateSave); + d_pthread_mutex_lock(&pAction->mutActExec); + pthread_cleanup_push(mutexCancelCleanup, &pAction->mutActExec); + pthread_setcancelstate(iCancelStateSave, NULL); + CHKiRet(pAction->pMod->doHUP(pAction->pModData)); + pthread_cleanup_pop(1); /* unlock mutex */ + +finalize_it: + RETiRet; +} +#pragma GCC diagnostic warning "-Wempty-body" + + /* set the action message queue mode * TODO: probably move this into queue object, merge with MainMsgQueue! * rgerhards, 2008-01-28 @@ -588,9 +649,7 @@ actionWriteToAction(action_t *pAction) */ if(pAction->f_prevcount > 1) { msg_t *pMsg; - uchar szRepMsg[64]; - snprintf((char*)szRepMsg, sizeof(szRepMsg), "last message repeated %d times", - pAction->f_prevcount); + uchar szRepMsg[1024]; if((pMsg = MsgDup(pAction->f_pMsg)) == NULL) { /* it failed - nothing we can do against it... */ @@ -598,11 +657,19 @@ actionWriteToAction(action_t *pAction) ABORT_FINALIZE(RS_RET_ERR); } + if(pAction->bRepMsgHasMsg == 0) { /* old format repeat message? */ + snprintf((char*)szRepMsg, sizeof(szRepMsg), "last message repeated %d times", + pAction->f_prevcount); + } else { + snprintf((char*)szRepMsg, sizeof(szRepMsg), "message repeated %d times: [%.800s]", + pAction->f_prevcount, getMSG(pAction->f_pMsg)); + } + /* We now need to update the other message properties. * ... RAWMSG is a problem ... Please note that digital * signatures inside the message are also invalidated. */ - datetime.getCurrTime(&(pMsg->tRcvdAt)); + datetime.getCurrTime(&(pMsg->tRcvdAt), &(pMsg->ttGenTime)); memcpy(&pMsg->tTIMESTAMP, &pMsg->tRcvdAt, sizeof(struct syslogTime)); MsgSetMSG(pMsg, (char*)szRepMsg); MsgSetRawMsg(pMsg, (char*)szRepMsg); @@ -625,18 +692,17 @@ actionWriteToAction(action_t *pAction) dbgprintf("action not yet ready again to be executed, onceInterval %d, tCurr %d, tNext %d\n", (int) pAction->iSecsExecOnceInterval, (int) getActNow(pAction), (int) (pAction->iSecsExecOnceInterval + pAction->tLastExec)); + pAction->tLastExec = getActNow(pAction); /* re-init time flags */ FINALIZE; } - pAction->f_time = pAction->tLastExec = getActNow(pAction); /* re-init time flags */ - /* Note: tLastExec could be set in the if block above, but f_time causes us a hard time - * so far, I do not see a solution to getting rid of it. -- rgerhards, 2008-09-16 - */ + /* we use reception time, not dequeue time - this is considered more appropriate and also faster ;) -- rgerhards, 2008-09-17 */ + pAction->f_time = pAction->f_pMsg->ttGenTime; /* When we reach this point, we have a valid, non-disabled action. * So let's enqueue our message for execution. -- rgerhards, 2007-07-24 */ - iRet = queueEnqObj(pAction->pQueue, pAction->f_pMsg->flowCtlType, (void*) MsgAddRef(pAction->f_pMsg)); + iRet = qqueueEnqObj(pAction->pQueue, pAction->f_pMsg->flowCtlType, (void*) MsgAddRef(pAction->f_pMsg)); if(iRet == RS_RET_OK) pAction->f_prevcount = 0; /* message processed, so we start a new cycle */ @@ -763,6 +829,7 @@ actionAddCfSysLineHdrl(void) { DEFiRet; + CHKiRet(regCfSysLineHdlr((uchar *)"actionname", 0, eCmdHdlrGetWord, NULL, &pszActionName, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionqueuefilename", 0, eCmdHdlrGetWord, NULL, &pszActionQFName, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionqueuesize", 0, eCmdHdlrInt, NULL, &iActionQueueSize, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionqueuemaxdiskspace", 0, eCmdHdlrSize, NULL, &iActionQueMaxDiskSpace, NULL)); @@ -785,6 +852,7 @@ actionAddCfSysLineHdrl(void) CHKiRet(regCfSysLineHdlr((uchar *)"actionqueuedequeuetimeend", 0, eCmdHdlrInt, NULL, &iActionQueueDeqtWinToHr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionexeconlyeverynthtime", 0, eCmdHdlrInt, NULL, &iActExecEveryNthOccur, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionexeconlyeverynthtimetimeout", 0, eCmdHdlrInt, NULL, &iActExecEveryNthOccurTO, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"repeatedmsgcontainsoriginalmsg", 0, eCmdHdlrBinary, NULL, &bActionRepMsgHasMsg, NULL)); finalize_it: RETiRet; @@ -814,10 +882,13 @@ addAction(action_t **ppAction, modInfo_t *pMod, void *pModData, omodStringReques CHKiRet(actionConstruct(&pAction)); /* create action object first */ pAction->pMod = pMod; pAction->pModData = pModData; + pAction->pszName = pszActionName; + pszActionName = NULL; /* free again! */ pAction->bExecWhenPrevSusp = bActExecWhenPrevSusp; pAction->iSecsExecOnceInterval = iActExecOnceInterval; pAction->iExecEveryNthOccur = iActExecEveryNthOccur; pAction->iExecEveryNthOccurTO = iActExecEveryNthOccurTO; + pAction->bRepMsgHasMsg = bActionRepMsgHasMsg; iActExecEveryNthOccur = 0; /* auto-reset */ iActExecEveryNthOccurTO = 0; /* auto-reset */ @@ -858,6 +929,13 @@ addAction(action_t **ppAction, modInfo_t *pMod, void *pModData, omodStringReques ABORT_FINALIZE(RS_RET_RQD_TPLOPT_MISSING); } + /* set parameter-passing mode */ + if(iTplOpts & OMSR_TPL_AS_ARRAY) { + pAction->eParamPassing = ACT_ARRAY_PASSING; + } else { + pAction->eParamPassing = ACT_STRING_PASSING; + } + dbgprintf("template: '%s' assigned\n", pTplName); } @@ -57,9 +57,12 @@ struct action_s { time_t tLastOccur; /* time last occurence was seen (for timing them out) */ struct modInfo_s *pMod;/* pointer to output module handling this selector */ void *pModData; /* pointer to module data - content is module-specific */ - int f_ReduceRepeated;/* reduce repeated lines 0 - no, 1 - yes */ + short bRepMsgHasMsg; /* "message repeated..." has msg fragment in it (0-no, 1-yes) */ + short f_ReduceRepeated;/* reduce repeated lines 0 - no, 1 - yes */ int f_prevcount; /* repetition cnt of prevline */ int f_repeatcount; /* number of "repeated" msgs */ + enum { ACT_STRING_PASSING = 0, ACT_ARRAY_PASSING = 1 } + eParamPassing; /* mode of parameter passing to action */ int iNumTpls; /* number of array entries for template element below */ struct template **ppTpl;/* array of template to use - strings must be passed to doAction * in this order. */ @@ -67,8 +70,9 @@ struct action_s { * content later). This is preserved after the message has been * processed - it is also used to detect duplicates. */ - queue_t *pQueue; /* action queue */ + qqueue_t *pQueue; /* action queue */ SYNC_OBJ_TOOL; /* required for mutex support */ + uchar *pszName; /* action name (for documentation) */ pthread_mutex_t mutActExec; /* mutex to guard actual execution of doAction for single-threaded modules */ }; typedef struct action_s action_t; @@ -85,6 +89,7 @@ rsRetVal actionSetGlobalResumeInterval(int iNewVal); rsRetVal actionDoAction(action_t *pAction); rsRetVal actionCallAction(action_t *pAction, msg_t *pMsg); rsRetVal actionWriteToAction(action_t *pAction); +rsRetVal actionCallHUPHdlr(action_t *pAction); rsRetVal actionClassInit(void); rsRetVal addAction(action_t **ppAction, modInfo_t *pMod, void *pModData, omodStringRequest_t *pOMSR, int bSuspended); diff --git a/autogen.sh b/autogen.sh new file mode 100755 index 00000000..daa87a2a --- /dev/null +++ b/autogen.sh @@ -0,0 +1,32 @@ +#!/bin/sh +# Run this to generate all the initial makefiles, etc. + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +(test -f $srcdir/configure.ac) || { + echo -n "**Error**: Directory "\`$srcdir\'" does not look like the" + echo " top-level package directory" + exit 1 +} + +if test -z "$*"; then + echo "**Warning**: I am going to run \`configure' with no arguments." + echo "If you wish to pass any to it, please specify them on the" + echo \`$0\'" command line." + echo +fi + +(cd $srcdir && autoreconf --verbose --force --install) || exit 1 + +conf_flags="--enable-shave --cache-file=config.cache" + +if test x$NOCONFIGURE = x; then + echo Running $srcdir/configure $conf_flags "$@" ... + $srcdir/configure $conf_flags "$@" \ + && echo Now type \`make\' to compile. || exit 1 +else + echo Skipping configure process. +fi + + diff --git a/configure.ac b/configure.ac index 987a8fb9..66a2d70d 100644 --- a/configure.ac +++ b/configure.ac @@ -2,7 +2,7 @@ # Process this file with autoconf to produce a configure script. AC_PREREQ(2.61) -AC_INIT([rsyslog],[3.22.1],[rsyslog@lists.adiscon.com]) +AC_INIT([rsyslog],[4.4.2],[rsyslog@lists.adiscon.com]) AM_INIT_AUTOMAKE AC_CONFIG_SRCDIR([ChangeLog]) AC_CONFIG_MACRO_DIR([m4]) @@ -10,6 +10,12 @@ AC_CONFIG_HEADERS([config.h]) AC_GNU_SOURCE +# check for Java compiler +AC_CHECK_PROG(HAVE_JAVAC, [javac], [yes]) +if test x"$HAVE_JAVAC" = x"yes"; then + AC_MSG_WARN([no javac found, disabling features depending on it]) +fi + # Checks for programs. AC_PROG_CC AM_PROG_CC_C_O @@ -35,6 +41,13 @@ case "${host}" in # do not DEFINE OS_BSD os_type="bsd" ;; + *-*-solaris*) + os_type="solaris" + AC_DEFINE([OS_SOLARIS], [1], [Indicator for a Solaris OS]) + AC_DEFINE([_POSIX_PTHREAD_SEMANTICS], [1], [Use POSIX pthread semantics]) + SOL_LIBS="-lsocket -lnsl" + AC_SUBST(SOL_LIBS) + ;; esac AC_DEFINE_UNQUOTED([HOSTENV], "$host", [the host environment, can be queried via a system variable]) @@ -56,7 +69,7 @@ AC_SUBST(DL_LIBS) AC_HEADER_RESOLV AC_HEADER_STDC AC_HEADER_SYS_WAIT -AC_CHECK_HEADERS([arpa/inet.h libgen.h fcntl.h locale.h netdb.h netinet/in.h paths.h stddef.h stdlib.h string.h sys/file.h sys/ioctl.h sys/param.h sys/socket.h sys/time.h sys/stat.h syslog.h unistd.h utmp.h]) +AC_CHECK_HEADERS([arpa/inet.h libgen.h fcntl.h locale.h netdb.h netinet/in.h paths.h stddef.h stdlib.h string.h sys/file.h sys/ioctl.h sys/param.h sys/socket.h sys/time.h sys/stat.h syslog.h unistd.h utmp.h sys/epoll.h]) # Checks for typedefs, structures, and compiler characteristics. AC_C_CONST @@ -91,7 +104,7 @@ AC_TYPE_SIGNAL AC_FUNC_STAT AC_FUNC_STRERROR_R AC_FUNC_VPRINTF -AC_CHECK_FUNCS([flock basename alarm clock_gettime gethostbyname gethostname gettimeofday localtime_r memset mkdir regcomp select setid socket strcasecmp strchr strdup strerror strndup strnlen strrchr strstr strtol strtoul uname ttyname_r]) +AC_CHECK_FUNCS([flock basename alarm clock_gettime gethostbyname gethostname gettimeofday localtime_r memset mkdir regcomp select setid socket strcasecmp strchr strdup strerror strndup strnlen strrchr strstr strtol strtoul uname ttyname_r epoll_wait getline]) # Check for MAXHOSTNAMELEN AC_MSG_CHECKING(for MAXHOSTNAMELEN) @@ -137,6 +150,7 @@ AC_ARG_WITH(moddirs, AM_CONDITIONAL(WITH_MODDIRS, test x$moddirs != x) AC_SUBST(moddirs) + # Large file support AC_ARG_ENABLE(largefile, [AS_HELP_STRING([--enable-largefile],[Enable large file support @<:@default=yes@:>@])], @@ -151,6 +165,7 @@ if test "$enable_largefile" = "no"; then AC_DEFINE(NOLARGEFILE, 1, [Defined when large file support is disabled.]) fi + # Regular expressions AC_ARG_ENABLE(regexp, [AS_HELP_STRING([--enable-regexp],[Enable regular expressions support @<:@default=yes@:>@])], @@ -166,6 +181,7 @@ if test "$enable_regexp" = "yes"; then AC_DEFINE(FEATURE_REGEXP, 1, [Regular expressions support enabled.]) fi + # zlib compression AC_ARG_ENABLE(zlib, [AS_HELP_STRING([--enable-zlib],[Enable zlib compression support @<:@default=yes@:>@])], @@ -186,17 +202,18 @@ if test "$enable_zlib" = "yes"; then fi fi + #gssapi AC_ARG_ENABLE(gssapi_krb5, [AS_HELP_STRING([--enable-gssapi-krb5],[Enable GSSAPI Kerberos 5 support @<:@default=no@:>@])], [case "${enableval}" in - yes) want_gssapi_krb5="yes" ;; - no) want_gssapi_krb5="no" ;; + yes) enable_gssapi_krb5="yes" ;; + no) enable_gssapi_krb5="no" ;; *) AC_MSG_ERROR(bad value ${enableval} for --enable-gssapi-krb5) ;; esac], - [want_gssapi_krb5=no] + [enable_gssapi_krb5=no] ) -if test $want_gssapi_krb5 = yes; then +if test $enable_gssapi_krb5 = yes; then AC_CHECK_LIB(gssapi_krb5, gss_acquire_cred, [ AC_CHECK_HEADER(gssapi/gssapi.h, [ AC_DEFINE(USE_GSSAPI,, @@ -206,7 +223,8 @@ if test $want_gssapi_krb5 = yes; then ]) ]) fi -AM_CONDITIONAL(ENABLE_GSSAPI, test x$want_gssapi_krb5 = xyes) +AM_CONDITIONAL(ENABLE_GSSAPI, test x$enable_gssapi_krb5 = xyes) + # multithreading via pthreads AC_ARG_ENABLE(pthreads, @@ -233,7 +251,10 @@ if test "x$enable_pthreads" != "xno"; then [ AC_DEFINE([USE_PTHREADS], [1], [Multithreading support enabled.]) PTHREADS_LIBS="-lpthread" - PTHREADS_CFLAGS="-pthread" + case "${os_type}" in + solaris) PTHREADS_CFLAGS="-pthreads" ;; + *) PTHREADS_CFLAGS="-pthread" ;; + esac AC_SUBST(PTHREADS_LIBS) AC_SUBST(PTHREADS_CFLAGS) ], @@ -245,6 +266,7 @@ if test "x$enable_pthreads" != "xno"; then ) fi + # klog AC_ARG_ENABLE(klog, [AS_HELP_STRING([--enable-klog],[Integrated klog functionality @<:@default=yes@:>@])], @@ -259,6 +281,7 @@ AM_CONDITIONAL(ENABLE_IMKLOG, test x$enable_klog = xyes) AM_CONDITIONAL(ENABLE_IMKLOG_BSD, test x$os_type = xbsd) AM_CONDITIONAL(ENABLE_IMKLOG_LINUX, test x$os_type = xlinux) + # # SYSLOG_UNIXAF # @@ -279,6 +302,7 @@ AC_ARG_ENABLE([unix], AC_DEFINE([SYSLOG_UNIXAF], [1], [Description]) ]) + # inet AC_ARG_ENABLE(inet, [AS_HELP_STRING([--enable-inet],[Enable networking support @<:@default=yes@:>@])], @@ -294,6 +318,7 @@ if test "$enable_inet" = "yes"; then AC_DEFINE(SYSLOG_INET, 1, [network support is integrated.]) fi + # # The following define determines whether the package adheres to the # file system standard. @@ -315,6 +340,7 @@ AC_ARG_ENABLE([fsstnd], AC_DEFINE([FSSTND], [1], [Description]) ]) + # debug AC_ARG_ENABLE(debug, [AS_HELP_STRING([--enable-debug],[Enable debug mode @<:@default=no@:>@])], @@ -332,6 +358,7 @@ if test "$enable_debug" = "no"; then AC_DEFINE(NDEBUG, 1, [Defined if debug mode is disabled.]) fi + # runtime instrumentation AC_ARG_ENABLE(rtinst, [AS_HELP_STRING([--enable-rtinst],[Enable runtime instrumentation mode @<:@default=no@:>@])], @@ -346,6 +373,7 @@ if test "$enable_rtinst" = "yes"; then AC_DEFINE(RTINST, 1, [Defined if runtime instrumentation mode is enabled.]) fi + # valgrind AC_ARG_ENABLE(valgrind, [AS_HELP_STRING([--enable-valgrind],[Enable valgrind support settings @<:@default=no@:>@])], @@ -443,6 +471,40 @@ AC_SUBST(PGSQL_CFLAGS) AC_SUBST(PGSQL_LIBS) +# oracle (OCI) support +AC_ARG_ENABLE(oracle, + [AS_HELP_STRING([--enable-oracle],[Enable native Oracle database support @<:@default=no@:>@])], + [case "${enableval}" in + yes) enable_oracle="yes" ;; + no) enable_oracle="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-oracle) ;; + esac], + [enable_oracle=no] +) +if test "x$enable_oracle" = "xyes"; then + AC_CHECK_PROG( + [HAVE_ORACLE_CONFIG], + [oracle-instantclient-config], + [yes],,, + ) + if test "x${HAVE_ORACLE_CONFIG}" != "xyes"; then + AC_MSG_FAILURE([oracle-instantclient-config not found in PATH]) + fi + AC_CHECK_LIB( + [occi], + [OCIEnvCreate], + [ORACLE_CFLAGS="`oracle-instantclient-config --cflags`" + ORACLE_LIBS="`oracle-instantclient-config --libs`" + ], + [AC_MSG_FAILURE([Oracle (OCI) libraray is missing])], + [`oracle-instantclient-config --libs --cflags`] + ) +fi +AM_CONDITIONAL(ENABLE_ORACLE, test x$enable_oracle = xyes) +AC_SUBST(ORACLE_CFLAGS) +AC_SUBST(ORACLE_LIBS) + + # libdbi support AC_ARG_ENABLE(libdbi, [AS_HELP_STRING([--enable-libdbi],[Enable libdbi database support @<:@default=no@:>@])], @@ -603,6 +665,7 @@ AM_CONDITIONAL(ENABLE_RELP, test x$enable_relp = xyes) AC_SUBST(RELP_CFLAGS) AC_SUBST(RELP_LIBS) + # RFC 3195 support AC_ARG_ENABLE(rfc3195, [AS_HELP_STRING([--enable-rfc3195],[Enable RFC3195 support @<:@default=no@:>@])], @@ -621,9 +684,26 @@ AC_SUBST(LIBLOGGING_CFLAGS) AC_SUBST(LIBLOGGING_LIBS) -# settings for the template input module; copy and modify this code -# if you intend to add your own module. Be sure to replace imtemplate -# by the actual name of your module. +# enable/disable the testbench (e.g. because some important parts +# are missing) +AC_ARG_ENABLE(testbench, + [AS_HELP_STRING([--enable-testbench],[file input module enabled @<:@default=yes@:>@])], + [case "${enableval}" in + yes) enable_testbench="yes" ;; + no) enable_testbench="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-testbench) ;; + esac], + [enable_testbench=yes] +) +if test "$enable_testbench" = "yes"; then + if test x$HAVE_JAVAC = x; then + enable_testbench='no' + fi +fi +AM_CONDITIONAL(ENABLE_TESTBENCH, test x$enable_testbench = xyes) + + +# settings for the file input module AC_ARG_ENABLE(imfile, [AS_HELP_STRING([--enable-imfile],[file input module enabled @<:@default=no@:>@])], [case "${enableval}" in @@ -633,14 +713,49 @@ AC_ARG_ENABLE(imfile, esac], [enable_imfile=no] ) -# -# you may want to do some library checks here - see snmp, mysql, pgsql modules -# for samples -# AM_CONDITIONAL(ENABLE_IMFILE, test x$enable_imfile = xyes) -AM_CONDITIONAL(ENABLE_IMTEMPLATE, test x$enable_imtemplate = xyes) -# end of copy template - be sure to serach for imtemplate to find everything! + +# settings for the omprog output module +AC_ARG_ENABLE(omprog, + [AS_HELP_STRING([--enable-omprog],[Compiles omprog module @<:@default=no@:>@])], + [case "${enableval}" in + yes) enable_omprog="yes" ;; + no) enable_omprog="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-omprog) ;; + esac], + [enable_omprog=no] +) +AM_CONDITIONAL(ENABLE_OMPROG, test x$enable_omprog = xyes) + + +# settings for omstdout +AC_ARG_ENABLE(omstdout, + [AS_HELP_STRING([--enable-omstdout],[Compiles stdout module @<:@default=no@:>@])], + [case "${enableval}" in + yes) enable_omstdout="yes" ;; + no) enable_omstdout="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-omstdout) ;; + esac], + [enable_omstdout=no] +) +AM_CONDITIONAL(ENABLE_OMSTDOUT, test x$enable_omstdout = xyes) + +# This provides a vehicle to integrate custom modules, that are not +# part of rsyslog, into the build process. It is named cust1, so that +# additional such modules can easily be added. +AC_ARG_ENABLE(cust1, + [AS_HELP_STRING([--enable-cust1],[Compiles stdout module @<:@default=no@:>@])], + [case "${enableval}" in + yes) enable_cust1="yes" ;; + no) enable_cust1="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-cust1) ;; + esac], + [enable_cust1=no] +) +AM_CONDITIONAL(ENABLE_CUST1, test x$enable_cust1 = xyes) + + # settings for the template input module; copy and modify this code # if you intend to add your own module. Be sure to replace imtemplate # by the actual name of your module. @@ -658,10 +773,35 @@ AC_ARG_ENABLE(imtemplate, # for samples # AM_CONDITIONAL(ENABLE_IMTEMPLATE, test x$enable_imtemplate = xyes) -# end of copy template - be sure to serach for imtemplate to find everything! +# end of copy template - be sure to search for imtemplate to find everything! + + +# settings for the template output module; copy and modify this code +# if you intend to add your own module. Be sure to replace omtemplate +# by the actual name of your module. +AC_ARG_ENABLE(omtemplate, + [AS_HELP_STRING([--enable-omtemplate],[Compiles omtemplate template module @<:@default=no@:>@])], + [case "${enableval}" in + yes) enable_omtemplate="yes" ;; + no) enable_omtemplate="no" ;; + *) AC_MSG_ERROR(bad value ${enableval} for --enable-omtemplate) ;; + esac], + [enable_omtemplate=no] +) +# +# you may want to do some library checks here - see snmp, mysql, pgsql modules +# for samples +# +AM_CONDITIONAL(ENABLE_OMTEMPLATE, test x$enable_omtemplate = xyes) +# end of copy template - be sure to search for omtemplate to find everything! + + +SHAVE_INIT AC_CONFIG_FILES([Makefile \ + shave \ + shave-libtool \ runtime/Makefile \ tools/Makefile \ doc/Makefile \ @@ -673,6 +813,9 @@ AC_CONFIG_FILES([Makefile \ plugins/immark/Makefile \ plugins/imklog/Makefile \ plugins/imtemplate/Makefile \ + plugins/omtemplate/Makefile \ + plugins/omprog/Makefile \ + plugins/omstdout/Makefile \ plugins/imfile/Makefile \ plugins/imrelp/Makefile \ plugins/imdiag/Makefile \ @@ -684,33 +827,51 @@ AC_CONFIG_FILES([Makefile \ plugins/omlibdbi/Makefile \ plugins/ommail/Makefile \ plugins/omsnmp/Makefile \ + plugins/omoracle/Makefile \ + plugins/cust1/Makefile \ tests/Makefile]) AC_OUTPUT echo "****************************************************" echo "rsyslog will be compiled with the following settings:" echo -echo "Multithreading support enabled: $enable_pthreads" -echo "Klog functionality enabled: $enable_klog ($os_type)" -echo "Regular expressions support enabled: $enable_regexp" -echo "Zlib compression support enabled: $enable_zlib" -echo "MySql support enabled: $enable_mysql" -echo "libdbi support enabled: $enable_libdbi" -echo "PostgreSQL support enabled: $enable_pgsql" -echo "SNMP support enabled: $enable_snmp" -echo "Mail support enabled: $enable_mail" -echo "RELP support enabled: $enable_relp" -echo "imdiag enabled: $enable_imdiag" -echo "file input module enabled: $enable_imfile" -echo "input template module will be compiled: $enable_imtemplate" -echo "Large file support enabled: $enable_largefile" -echo "Networking support enabled: $enable_inet" -echo "GnuTLS network stream driver enabled: $enable_gnutls" -echo "Enable GSSAPI Kerberos 5 support: $want_gssapi_krb5" -echo "Debug mode enabled: $enable_debug" -echo "Runtime Instrumentation enabled: $enable_rtinst" -echo "Diagnostic tools enabled: $enable_diagtools" -echo "valgrind support settings enabled: $enable_valgrind" -echo "rsyslog runtime will be built: $enable_rsyslogrt" -echo "rsyslogd will be built: $enable_rsyslogd" - +echo " Multithreading support enabled: $enable_pthreads" +echo " Large file support enabled: $enable_largefile" +echo " Networking support enabled: $enable_inet" +echo " Regular expressions support enabled: $enable_regexp" +echo " Zlib compression support enabled: $enable_zlib" +echo " rsyslog runtime will be built: $enable_rsyslogrt" +echo " rsyslogd will be built: $enable_rsyslogd" +echo " custom module 1 will be built: $enable_cust1" +echo +echo "---{ input plugins }---" +echo " Klog functionality enabled: $enable_klog ($os_type)" +echo " imdiag enabled: $enable_imdiag" +echo " file input module enabled: $enable_imfile" +echo " input template module will be compiled: $enable_imtemplate" +echo +echo "---{ output plugins }---" +echo " Mail support enabled: $enable_mail" +echo " omprog module will be compiled: $enable_omprog" +echo " omstdout module will be compiled: $enable_omstdout" +echo " output template module will be compiled: $enable_omtemplate" +echo +echo "---{ database support }---" +echo " MySql support enabled: $enable_mysql" +echo " libdbi support enabled: $enable_libdbi" +echo " PostgreSQL support enabled: $enable_pgsql" +echo " Oracle (OCI) support enabled: $enable_oracle" +echo +echo "---{ protocol support }---" +echo " GnuTLS network stream driver enabled: $enable_gnutls" +echo " GSSAPI Kerberos 5 support enabled: $enable_gssapi_krb5" +echo " RELP support enabled: $enable_relp" +echo " SNMP support enabled: $enable_snmp" +echo +echo "---{ debugging support }---" +echo " Testbench enabled: $enable_testbench" +echo " Debug mode enabled: $enable_debug" +echo " Runtime Instrumentation enabled: $enable_rtinst" +echo " Diagnostic tools enabled: $enable_diagtools" +echo " Valgrind support settings enabled: $enable_valgrind" +echo @@ -27,20 +27,12 @@ #ifndef DIRTY_H_INCLUDED #define DIRTY_H_INCLUDED 1 -/* Flags to logmsg(). - */ -#define NOFLAG 0x000 /* no flag is set (to be used when a flag must be specified and none is required) */ -#define INTERNAL_MSG 0x001 /* msg generated by logmsgInternal() --> special handling */ -/* NO LONGER USED: #define SYNC_FILE 0x002 / * do fsync on file after printing */ -#define IGNDATE 0x004 /* ignore, if given, date in message and use date of reception as msg date */ -#define MARK 0x008 /* this message is a mark */ - -#define MSG_PARSE_HOSTNAME 1 -#define MSG_DONT_PARSE_HOSTNAME 0 - rsRetVal submitMsg(msg_t *pMsg); rsRetVal logmsgInternal(int iErr, int pri, uchar *msg, int flags); -rsRetVal parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int bParseHost, int flags, flowControl_t flowCtlTypeu, uchar *pszInputName); +rsRetVal parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int flags, flowControl_t flowCtlTypeu, uchar *pszInputName, struct syslogTime *stTime, time_t ttGenTime); +int parseRFCSyslogMsg(msg_t *pMsg, int flags); +int parseLegacySyslogMsg(msg_t *pMsg, int flags); +rsRetVal diagGetMainMsgQSize(int *piSize); /* for imdiag */ /* TODO: the following 2 need to go in conf obj interface... */ rsRetVal cflineParseTemplateName(uchar** pp, omodStringRequest_t *pOMSR, int iEntry, int iTplOpts, uchar *dfltTplName); @@ -61,6 +53,9 @@ extern int bReduceRepeatMsgs; #define BACKOFF(f) { if (++(f)->f_repeatcount > MAXREPEAT) \ (f)->f_repeatcount = MAXREPEAT; \ } +extern int bDropTrailingLF; +extern uchar cCCEscapeChar; +extern int bEscapeCCOnRcv; #ifdef USE_NETZIP /* config param: minimum message size to try compression. The smaller * the message, the less likely is any compression gain. We check for diff --git a/doc/Makefile.am b/doc/Makefile.am index d38d4d0b..0703b8fc 100644 --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -5,6 +5,7 @@ html_files = \ features.html \ generic_design.html \ expression.html \ + droppriv.html \ history.html \ how2help.html \ install.html \ @@ -32,6 +33,7 @@ html_files = \ dev_queue.html \ omsnmp.html \ ommysql.html \ + omoracle.html \ omlibdbi.html \ imfile.html \ imtcp.html \ @@ -76,6 +78,7 @@ html_files = \ rsconf1_filecreatemode.html \ rsconf1_filegroup.html \ rsconf1_fileowner.html \ + rsconf1_generateconfiggraph.html \ rsconf1_gssforwardservicename.html \ rsconf1_gsslistenservicename.html \ rsconf1_gssmode.html \ @@ -99,6 +102,30 @@ html_files = \ omrelp.html \ syslog_parsing.html \ troubleshoot.html \ + rsyslog_conf_actions.html \ + rsyslog_conf_examples.html \ + rsyslog_conf_filter.html \ + rsyslog_conf_global.html \ + rsyslog_conf_modules.html \ + rsyslog_conf_output.html \ + rsyslog_conf_templates.html \ + rsyslog_conf_nomatch.html \ + queues_analogy.html \ src/classes.dia -EXTRA_DIST = $(html_files) +grfx_files = \ + rsyslog_confgraph_complex.png\ + rsyslog_confgraph_std.png \ + direct_queue0.png \ + direct_queue1.png \ + direct_queue2.png \ + direct_queue3.png \ + direct_queue_rsyslog.png \ + direct_queue_rsyslog2.png \ + direct_queue_directq.png \ + dataflow.png \ + queue_analogy_tv.png \ + gssapi.png \ + rsyslog-vers.png + +EXTRA_DIST = $(html_files) $(grfx_files) diff --git a/doc/dataflow.png b/doc/dataflow.png Binary files differnew file mode 100644 index 00000000..fd614d8c --- /dev/null +++ b/doc/dataflow.png diff --git a/doc/dev_oplugins.html b/doc/dev_oplugins.html new file mode 100644 index 00000000..cc2f7f38 --- /dev/null +++ b/doc/dev_oplugins.html @@ -0,0 +1,178 @@ +<html> +<head> +<title>writing rsyslog output plugins (developer's guide)</title> +</head> +<body> +<h1>Writing Rsyslog Output Plugins</h1> +<p>This page is the begin of some developer documentation for writing output +plugins. Doing so is quite easy (and that was a design goal), but there currently +is only sparse documentation on the process available. I was tempted NOT to +write this guide here because I know I will most probably not be able to +write a complete guide. +<p>However, I finally concluded that it may be better to have same information +and pointers than to have nothing. +<h2>Getting Started and Samples</h2> +<p>The best to get started with rsyslog plugin development is by looking at +existing plugins. All that start with "om" are <b>o</b>utput <b>m</b>odules. That +means they are primarily thought of being message sinks. In theory, however, output +plugins may aggergate other functionality, too. Nobody has taken this route so far +so if you would like to do that, it is highly suggested to post your plan on the +rsyslog mailing list, first (so that we can offer advise). +<p>The rsyslog distribution tarball contains two plugins that are extremely well +targeted for getting started: +<ul> +<li>omtemplate +<li>omstdout +</ul> +Plugin omtemplate was specifically created to provide a copy template for new output +plugins. It is bare of real functionality but has ample comments. Even if you decide +to start from another plugin (or even from scratch), be sure to read omtemplate source +and comments first. The omstdout is primarily a testing aide, but offers support for +the two different parameter-passing conventions plugins can use (plus the way to +differentiate between the two). It also is not bare of functionaly, only mostly +bare of it ;). But you can actually execute it and play with it. +<p>In any case, you should also read the comments in ./runtime/module-template.h. +Output plugins are build based on a large set of code-generating macros. These +macros handle most of the plumbing needed by the interface. As long as no +special callback to rsyslog is needed (it typically is not), an output plugin does +not really need to be aware that it is executed by rsyslog. As a plug-in programmer, +you can (in most cases) "code as usual". However, all macros and entry points need to be +provided and thus reading the code comments in the files mentioned is highly suggested. +<p>In short, the best idea is to start with a template. Let's assume you start by +copying omtemplate. Then, the basic steps you need to do are: +<ul> +<li>cp ./plugins/omtemplate ./plugins/your-plugin +<li>mv cd ./plugins/your-plugin +<li>vi Makefile.am, adjust to your-plugin +<li>mv omtemplate.c your-plugin.c +<li>cd ../.. +<li>vi Makefile.am configure.ac +<br>search for omtemplate, copy and modify (follow comments) +</ul> +<p>Basically, this is all you need to do ... Well, except, of course, coding +your plugin ;). For testing, you need rsyslog's debugging support. Some useful +information is given in "<a href="troubleshoot.html">troubleshooting rsyslog</a> +from the doc set. +<h2>Special Topics</h2> +<h3>Threading</h3> +<p>Rsyslog uses massive parallel processing and multithreading. However, a plugin's entry +points are guaranteed to be never called concurrently <b>for the same action</b>. +That means your plugin must be able to be called concurrently by two or more +threads, but you can be sure that for the same instance no concurrent calls +happen. This is guaranteed by the interface specification and the rsyslog core +guards against multiple concurrent calls. An instance, in simple words, is one +that shares a single instanceData structure. +<p>So as long as you do not mess around with global data, you do not need +to think about multithreading (and can apply a purely sequential programming +methodology). +<p>Please note that duringt the configuraton parsing stage of execution, access to +global variables for the configuration system is safe. In that stage, the core will +only call sequentially into the plugin. +<h3>Getting Message Data</h3> +<p>The doAction() entry point of your plugin is provided with messages to be processed. +It will only be activated after filtering and all other conditions, so you do not need +to apply any other conditional but can simply process the message. +<p>Note that you do NOT receive the full internal representation of the message +object. There are various (including historical) reasons for this and, among +others, this is a design decision based on security. +<p>Your plugin will only receive what the end user has configured in a $template +statement. However, starting with 4.1.6, there are two ways of receiving the +template content. The default mode, and in most cases sufficient and optimal, +is to receive a single string with the expanded template. As I said, this is usually +optimal, think about writing things to files, emailing content or forwarding it. +<p>The important philosophy is that a plugin should <b>never</b> reformat any +of such strings - that would either remove the user's ability to fully control +message formats or it would lead to duplicating code that is already present in the +core. If you need some formatting that is not yet present in the core, suggest it +to the rsyslog project, best done by sending a patch ;), and we will try hard to +get it into the core (so far, we could accept all such suggestions - no promise, though). +<p>If a single string seems not suitable for your application, the plugin can also +request access to the template components. The typical use case seems to be databases, where +you would like to access properties via specific fields. With that mode, you receive a +char ** array, where each array element points to one field from the template (from +left to right). Fields start at arrray index 0 and a NULL pointer means you have +reached the end of the array (the typical Unix "poor man's linked list in an array" +design). Note, however, that each of the individual components is a string. It is +not a date stamp, number or whatever, but a string. This is because rsyslog processes +strings (from a high-level design look at it) and so this is the natural data type. +Feel free to convert to whatever you need, but keep in mind that malformed packets +may have lead to field contents you'd never expected... +<p>If you like to use the array-based parameter passing method, think that it +is only available in rsyslog 4.1.6 and above. If you can accept that your plugin +will not be working with previous versions, you do not need to handle pre 4.1.6 cases. +However, it would be "nice" if you shut down yourself in these cases - otherwise the +older rsyslog core engine will pass you a string where you expect the array of pointers, +what most probably results in a segfault. To check whether or not the core supports the +functionality, you can use this code sequence: +<pre> +<code> +BEGINmodInit() + rsRetVal localRet; + rsRetVal (*pomsrGetSupportedTplOpts)(unsigned long *pOpts); + unsigned long opts; + int bArrayPassingSupported; /* does core support template passing as an array? */ +CODESTARTmodInit + *ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */ +CODEmodInit_QueryRegCFSLineHdlr + /* check if the rsyslog core supports parameter passing code */ + bArrayPassingSupported = 0; + localRet = pHostQueryEtryPt((uchar*)"OMSRgetSupportedTplOpts", &pomsrGetSupportedTplOpts); + if(localRet == RS_RET_OK) { + /* found entry point, so let's see if core supports array passing */ + CHKiRet((*pomsrGetSupportedTplOpts)(&opts)); + if(opts & OMSR_TPL_AS_ARRAY) + bArrayPassingSupported = 1; + } else if(localRet != RS_RET_ENTRY_POINT_NOT_FOUND) { + ABORT_FINALIZE(localRet); /* Something else went wrong, what is not acceptable */ + } + DBGPRINTF("omstdout: array-passing is %ssupported by rsyslog core.\n", bArrayPassingSupported ? "" : "not "); + + if(!bArrayPassingSupported) { + DBGPRINTF("rsyslog core too old, shutting down this plug-in\n"); + ABORT_FINALIZE(RS_RET_ERR); + } + +</code> +</pre> +<p>The code first checks if the core supports the OMSRgetSupportedTplOpts() API (which is +also not present in all versions!) and, if so, queries the core if the OMSR_TPL_AS_ARRAY mode +is supported. If either does not exits, the core is too old for this functionality. The sample +snippet above then shuts down, but a plugin may instead just do things different. In +omstdout, you can see how a plugin may deal with the situation. +<p><b>In any case, it is recommended that at least a graceful shutdown is made and the +array-passing capability not blindly be used.</b> In such cases, we can not guard the +plugin from segfaulting and if the plugin (as currently always) is run within +rsyslog's process space, that results in a segfault for rsyslog. So do not do this. +<h3>Batching of Messages</h3> +<p>With the current plugin interface, each message is passed via a separate call to the plugin. +This is annoying and costs performance in some uses cases (primarily for database outputs). +However, that's the way it (currently) is, no easy way around it. There are some ideas +to implement batching capabilities inside the rsyslog core, but without that the only +resort is to do it inside your plugin yourself. You are not prohibited from doing so. +There are some consequences, though: most importantly, the rsyslog core is no longer +intersted in messages that it passed to a plugin. As such, it will not try to make sure +the message is not lost before it was ultimately processed (because rsyslog, due to +doAction() returning successfully, thinks the message *was* ultimately processed). +<p>When the rsyslog core receives batching capabilities, this will be implemented in +a way that is fully compatible to the existing plugin interface. While we have not yet +thought about the implementation, that will probably mean that some new interfaces +or options be used to turn on batching capabilities. +<h3>Licensing</h3> +<p>From the rsyslog point of view, plugins constitute separate projects. As such, +we think plugins are not required to be compatible with GPLv3. However, this is +no legal advise. If you intend to release something under a non-GPLV3 compatible license +it is probably best to consult with your lawyer. +<p>Most importantly, and this is definite, the rsyslog team does not expect +or require you to contribute your plugin to the rsyslog project (but of course +we are happy if you do). +<h2>Copyright</h2> +<p>Copyright (c) 2009 <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> +and <a href="http://www.adiscon.com/en/">Adiscon</a>.</p> +<p>Permission is granted to copy, distribute and/or modify this document under +the terms of the GNU Free Documentation License, Version 1.2 or any later +version published by the Free Software Foundation; with no Invariant Sections, +no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be +viewed at <a href="http://www.gnu.org/copyleft/fdl.html"> +http://www.gnu.org/copyleft/fdl.html</a>.</p> +</body> +</html> diff --git a/doc/direct_queue0.png b/doc/direct_queue0.png Binary files differnew file mode 100644 index 00000000..6d1b373f --- /dev/null +++ b/doc/direct_queue0.png diff --git a/doc/direct_queue1.png b/doc/direct_queue1.png Binary files differnew file mode 100644 index 00000000..503f8151 --- /dev/null +++ b/doc/direct_queue1.png diff --git a/doc/direct_queue2.png b/doc/direct_queue2.png Binary files differnew file mode 100644 index 00000000..cbb99af8 --- /dev/null +++ b/doc/direct_queue2.png diff --git a/doc/direct_queue3.png b/doc/direct_queue3.png Binary files differnew file mode 100644 index 00000000..cc49299f --- /dev/null +++ b/doc/direct_queue3.png diff --git a/doc/direct_queue_directq.png b/doc/direct_queue_directq.png Binary files differnew file mode 100644 index 00000000..c5d8769d --- /dev/null +++ b/doc/direct_queue_directq.png diff --git a/doc/direct_queue_rsyslog.png b/doc/direct_queue_rsyslog.png Binary files differnew file mode 100644 index 00000000..6150222d --- /dev/null +++ b/doc/direct_queue_rsyslog.png diff --git a/doc/direct_queue_rsyslog2.png b/doc/direct_queue_rsyslog2.png Binary files differnew file mode 100644 index 00000000..807b064d --- /dev/null +++ b/doc/direct_queue_rsyslog2.png diff --git a/doc/droppriv.html b/doc/droppriv.html new file mode 100644 index 00000000..7293e872 --- /dev/null +++ b/doc/droppriv.html @@ -0,0 +1,60 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head><title>dropping privileges in rsyslog</title> +</head> +<body> +<h1>Dropping privileges in rsyslog</h1> +<p><b>Available since: </b> 4.1.1</p> +<p><b>Description</b>:</p> +<p> +Rsyslogd provides the ability to drop privileges by +impersonating as another user and/or group after startup. + +<p>Please note that due to POSIX standards, rsyslogd always needs to start +up as root if there is a listener who must bind to a network port below 1024. +For example, the UDP listener usually needs to listen to 514 and as such +rsyslogd needs to start up as root. + +<p>If you do not need this functionality, you can start rsyslog directly as an ordinary +user. That is probably the safest way of operations. However, if a startup as +root is required, you can use the $PrivDropToGroup and $PrivDropToUser config +directives to specify a group and/or user that rsyslogd should drop to after initialization. +Once this happend, the daemon runs without high privileges (depending, of +course, on the permissions of the user account you specified). +<p>There is some additional information available in the +<a href="http://wiki.rsyslog.com/index.php/Security#Dropping_Privileges">rsyslog wiki</a>. +<p><b>Configuration Directives</b>:</p> +<ul> +<li><b>$PrivDropToUser</b><br> +Name of the user rsyslog should run under after startup. Please note that +this user is looked up in the system tables. If the lookup fails, privileges are +NOT dropped. Thus it is advisable to use the less convenient $PrivDropToUserID directive. +If the user id can be looked up, but can not be set, rsyslog aborts. +<br> +</li> +<li><b>$PrivDropToUserID</b><br> +Much the same as $PrivDropToUser, except that a numerical user id instead of a name +is specified.Thus, privilege drop will always happen. +rsyslogd aborts. +<li><b>$PrivDropToGroup</b><br> +Name of the group rsyslog should run under after startup. Please note that +this user is looked up in the system tables. If the lookup fails, privileges are +NOT dropped. Thus it is advisable to use the less convenient $PrivDropToGroupID directive. +Note that all supplementary groups are removed from the process if $PrivDropToGroup is +specified. +If the group id can be looked up, but can not be set, rsyslog aborts. +<br> +</li> +<li><b>$PrivDropToGroupID</b><br> +Much the same as $PrivDropToGroup, except that a numerical group id instead of a name +is specified. Thus, privilege drop will always happen. +</ul> +<p>[<a href="rsyslog_conf.html">rsyslog.conf overview</a>] +[<a href="manual.html">manual index</a>] [<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the <a href="http://www.rsyslog.com/">rsyslog</a> +project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer +Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. +Released under the GNU GPL version 3 or higher.</font></p> + +</body></html> diff --git a/doc/expression.html b/doc/expression.html index e7eb7842..9e37cb7a 100644 --- a/doc/expression.html +++ b/doc/expression.html @@ -2,6 +2,7 @@ <html><head> <meta http-equiv="Content-Language" content="en"><title>Expressions</title></head> <body> +<a href="rsyslog_conf_filter.html">back</a> <h1>Expressions</h1> <p>Rsyslog supports expressions at a growing number of places. So far, they are supported for filtering messages.</p><p>Expression support is provided by RainerScript. For now, please see the formal expression definition in <a href="rainerscript.html">RainerScript ABNF</a>. It is the "expr" node.</p><p>C-like comments (/* some comment */) are supported <span style="font-weight: bold;">inside</span> the expression, but not yet in the rest of the configuration file.</p><p>[<a href="rsyslog_conf.html">rsyslog.conf overview</a>] @@ -13,4 +14,4 @@ Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 3 or higher.</font></p> -</body></html>
\ No newline at end of file +</body></html> diff --git a/doc/features.html b/doc/features.html index d221eb77..626ff65d 100644 --- a/doc/features.html +++ b/doc/features.html @@ -1,8 +1,8 @@ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html><head><title>rsyslog features</title> - </head> <body> +<a href="rsyslog_conf.html">back</a> <h1>RSyslog - Features</h1> <p><b>This page lists both current features as well as those being considered for future versions of rsyslog.</b> If you @@ -95,13 +95,16 @@ via custom plugins</li> <li> an easy-to-write to plugin interface</li> <li> ability to send SNMP trap messages</li> <li> ability to filter out messages based on sequence of arrival</li> +<li>support for comma-seperated-values (CSV) output generation +(via the "csv" property replace option). The +CSV format supported is that from RFC 4180.</li> <li>support for arbitrary complex boolean, string and arithmetic expressions in message filters</li> </ul> <h2>World's first</h2> Rsyslog has an interesting number of "world's firsts" - things that were implemented for the first time ever in rsyslog. Some of them are still features not available elsewhere.<br><ul> -<li>world's first implementation of IETF I-D syslog-protocol (February 2006, version 1.12.2 and above)</li><li>world's first implementation of dynamic syslog on-the-wire compression (December 2006, version 1.13.0 and above)</li><li>world's first open-source implementation of a disk-queueing syslogd (January 2008, version 3.11.0 and above)</li> +<li>world's first implementation of IETF I-D syslog-protocol (February 2006, version 1.12.2 and above), now RFC5424</li><li>world's first implementation of dynamic syslog on-the-wire compression (December 2006, version 1.13.0 and above)</li><li>world's first open-source implementation of a disk-queueing syslogd (January 2008, version 3.11.0 and above)</li> <li>world's first implementation of IETF I-D syslog-transport-tls (May 2008, version 3.19.0 and above)</li> </ul> @@ -116,6 +119,13 @@ submit feature requests there (or via our forums). If we like them but they look quite long-lived (aka "not soon to be implemented"), they will possibly be migrated to this list here and at some time moved back to the bugzilla tracker.</p> +<p><b>Note that we also maintain a +<a href="http://www.rsyslog.com/sponsor_feature">list of features that are looking for sponsors</a>. +If you are interested in any of these features, or any other feature, you may consider sponsoring +the implementation. This is also a great way to show your commitment to the open source +community. Plus, it can be financially attractive: just think about how much less it may +be to sponsor a feature instead of purchasing a commercial implementation. Also, the benefit +of being recognised as a sponsor may even drive new customers to your business!</b> <ul> <li>port it to more *nix variants (eg AIX and HP UX) - this needs volunteers with access to those machines and knowledge </li> @@ -134,4 +144,15 @@ future of RFC 3195 in rsyslog</a>.</li> <p>To see when each feature was added, see the <a href="http://www.rsyslog.com/Topic4.phtml">rsyslog change log</a> (online only).</p> + +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> + </body></html> + diff --git a/doc/how2help.html b/doc/how2help.html index 0caa5a3a..4f0bd57a 100644 --- a/doc/how2help.html +++ b/doc/how2help.html @@ -1,59 +1,57 @@ -<html>
-<head>
-<title>How you can Help</title>
-</head>
-<body>
-<h2>How you can Help</h2>
-<p><b>You like rsyslog and would like to lend us a helping hand?</b> This page
-tells you how easy it is to help a little bit. You can contribute to the project
-even with a single mouse click! If you could pick a single item from the
-wish list, that would be awfully helpful!</p>
-<p>This is our wish list:</p>
-<ul>
- <li>let others know how great rsyslog is<ul>
- <li>rate us at <a href="http://freshmeat.net/rate/52985/">freshmeat.net</a>
- and <a href="http://www.icewalkers.com/vote.php?ID=2420">icewalkers.com</a></li>
- <li>spread word about rsyslog in forums and newsgroups</li>
- <li>place a link to <a href="http://www.rsyslog.com">www.rsyslog.com</a>
- from your home page</li>
- </ul>
- </li>
- <li>let us know about rsyslog - we are eager for feedback<ul>
- <li>tell us what you like and what you not like - so that we can include
- that into development</li>
- <li>tell us what you use rsyslog for - especially if you have high
- traffic volume or an otherwise "uncommon" deployment. We are looking for
- case studies and experience how rsyslog performs in unusual scenarios.</li>
- <li>allow us to post your thoughts and experiences as a "user story" on
- the web site (so far, none are there ;))</li>
- </ul>
- </li>
- <li>if you know how to create packages (rpm, deb, ...)<ul>
- <li>we would very much appreciate your help with package creation. We know
- that it is important to have good binary packages for a product to
- spread widely. Yet, we do not have the knowledge to do it all ourselves.
- <a href="mailto:rgerhards@adiscon.com">Drop Rainer a note </a>if you
- could help us out.</li>
- </ul>
- </li>
- <li>if you have configured a device for sending syslog data, and that device
- is not in our
- <a href="http://www.monitorware.com/en/syslog-enabled-products/">syslog
- configuration database</a>, you might want to tell us how to configure it.</li>
- <li>if you are a corporate user<ul>
- <li>you might consider <a href="http://www.adiscon.com">Adiscon</a>'s
- commercial <a href="http://www.monitorware.com/">MonitorWare products</a>
- for Windows, e.g. to deliver Windows Event Log data to rsyslogd (sales
- of the commercial products funds the open source development - and they
- also work very well).</li>
- <li>you might be interested in
- <a href="http://www.adiscon.com/Common/en/Products/techsup.php">
- purchasing professional support or add-on development</a> for rsyslog</li>
- </ul>
- </li>
-</ul>
-<p><b>We appreciate your help very much.</b> A big thank you for anything you
-might do!</p>
-
-</body>
-</html> +<html> +<head> +<title>How you can Help</title> +</head> +<body> +<h2>How you can Help</h2> +<p><b>You like rsyslog and would like to lend us a helping hand?</b> This page +tells you how easy it is to help a little bit. You can contribute to the project +even with a single mouse click! If you could pick a single item from the +wish list, that would be awfully helpful!</p> +<p>This is our wish list:</p> +<ul> + <li>let others know how great rsyslog is<ul> + <li>spread word about rsyslog in forums and newsgroups</li> + <li>place a link to <a href="http://www.rsyslog.com">www.rsyslog.com</a> + from your home page</li> + </ul> + </li> + <li>let us know about rsyslog - we are eager for feedback<ul> + <li>tell us what you like and what you not like - so that we can include + that into development</li> + <li>tell us what you use rsyslog for - especially if you have high + traffic volume or an otherwise "uncommon" deployment. We are looking for + case studies and experience how rsyslog performs in unusual scenarios.</li> + <li>allow us to post your thoughts and experiences as a "user story" on + the web site (so far, none are there ;))</li> + </ul> + </li> + <li>if you know how to create packages (rpm, deb, ...)<ul> + <li>we would very much appreciate your help with package creation. We know + that it is important to have good binary packages for a product to + spread widely. Yet, we do not have the knowledge to do it all ourselves. + <a href="mailto:rgerhards@adiscon.com">Drop Rainer a note </a>if you + could help us out.</li> + </ul> + </li> + <li>if you have configured a device for sending syslog data, and that device + is not in our + <a href="http://www.monitorware.com/en/syslog-enabled-products/">syslog + configuration database</a>, you might want to tell us how to configure it.</li> + <li>if you are a corporate user<ul> + <li>you might consider <a href="http://www.adiscon.com">Adiscon</a>'s + commercial <a href="http://www.monitorware.com/">MonitorWare products</a> + for Windows, e.g. to deliver Windows Event Log data to rsyslogd (sales + of the commercial products funds the open source development - and they + also work very well).</li> + <li>you might be interested in + <a href="http://www.adiscon.com/Common/en/Products/techsup.php"> + purchasing professional support or add-on development</a> for rsyslog</li> + </ul> + </li> +</ul> +<p><b>We appreciate your help very much.</b> A big thank you for anything you +might do!</p> + +</body> +</html diff --git a/doc/im3195.html b/doc/im3195.html index d6f2f2ed..aad9f3d1 100644 --- a/doc/im3195.html +++ b/doc/im3195.html @@ -4,6 +4,8 @@ </head> <body> +<a href="rsyslog_conf_modules.html">back</a> + <h1>RFC3195 Input Module</h1> <p><b>Module Name: im3195</b></p> <p><b>Author: </b>Rainer Gerhards diff --git a/doc/imfile.html b/doc/imfile.html index 5bdbce5c..af0413dd 100644 --- a/doc/imfile.html +++ b/doc/imfile.html @@ -2,6 +2,8 @@ <html><head> <meta http-equiv="Content-Language" content="en"><title>Text File Input Monitor</title></head> <body> +<a href="rsyslog_conf_modules.html">back</a> + <h1>Text File Input Module</h1> <p><b>Module Name: imfile</b></p> <p><b>Author: </b>Rainer Gerhards diff --git a/doc/imgssapi.html b/doc/imgssapi.html index d644303e..ec183fe7 100644 --- a/doc/imgssapi.html +++ b/doc/imgssapi.html @@ -4,6 +4,8 @@ </head> <body> +<a href="rsyslog_conf_modules.html">back</a> + <h1>GSSAPI Syslog Input Module</h1> <p><b>Module Name: imgssapi</b></p> <p><b>Author: </b>varmojfekoj</p> diff --git a/doc/imklog.html b/doc/imklog.html index b5b21e84..9166bae6 100644 --- a/doc/imklog.html +++ b/doc/imklog.html @@ -4,6 +4,8 @@ </head> <body> +<a href="rsyslog_conf_modules.html">back</a> + <h1>Kernel Log Input Module</h1> <p><b>Module Name: imklog</b></p> <p><b>Author: </b>Rainer Gerhards diff --git a/doc/imrelp.html b/doc/imrelp.html index cfc6da38..2cf9c1f7 100644 --- a/doc/imrelp.html +++ b/doc/imrelp.html @@ -4,6 +4,8 @@ </head> <body> +<a href="rsyslog_conf_modules.html">back</a> + <h1>RELP Input Module</h1> <p><b>Module Name: imrelp</b></p> <p><b>Author: Rainer Gerhards</b></p> diff --git a/doc/imtcp.html b/doc/imtcp.html index ecc72748..9ea7efa1 100644 --- a/doc/imtcp.html +++ b/doc/imtcp.html @@ -2,6 +2,8 @@ <html><head> <meta http-equiv="Content-Language" content="en"><title>TCP Syslog Input Module</title></head> <body> +<a href="rsyslog_conf_modules.html">back</a> + <h1>TCP Syslog Input Module</h1> <p><b>Module Name: imtcp</b></p> <p><b>Author: </b>Rainer Gerhards @@ -12,17 +14,43 @@ Encryption can be provided by using <a href="rsyslog_stunnel.html">stunnel</a> (an alternative is the use the <a href="imgssapi.html">imgssapi</a> modul).</p> -<p>In the future, multiple receivers may be configured by +<p>Multiple receivers may be configured by specifying -$InputTCPServerRun multiple times. This is not currently supported. +$InputTCPServerRun multiple times. This is available since version 4.3.1, earlier +versions do NOT support it. </p> <p><b>Configuration Directives</b>:</p> <ul> +<li>$InputTCPServerAddtlFrameDelimiter <Delimiter><br> +This directive permits to specify an additional frame delimiter for plain tcp syslog. +The industry-standard specifies using the LF character as frame delimiter. Some vendors, +notable Juniper in their NetScreen products, use an invalid frame delimiter, in Juniper's +case the NUL character. This directive permits to specify the ASCII value of the delimiter +in question. Please note that this does not guarantee that all wrong implementations can +be cured with this directive. It is not even a sure fix with all versions of NetScreen, +as I suggest the NUL character is the effect of a (common) coding error and thus will +probably go away at some time in the future. But for the time being, the value 0 can +probably be used to make rsyslog handle NetScreen's invalid syslog/tcp framing. +For additional information, see this +<a href="http://kb.monitorware.com/problem-with-netscreen-log-t1652.html">forum thread</a>. +<br><b>If this doesn't work for you, please do not blame the rsyslog team. Instead file +a bug report with Juniper!</b> +<br>Note that a similar, but worse, issue exists with Cisco's IOS implementation. They do +not use any framing at all. This is confirmed from Cisco's side, but there seems to be +very limited interest in fixing this issue. This directive <b>can not</b> fix the Cisco bug. +That would require much more code changes, which I was unable to do so far. Full details +can be found at the <a href="http://www.rsyslog.com/Article321.phtml">Cisco tcp syslog anomaly</a> +page. <li>$InputTCPServerRun <port><br> Starts a TCP server on selected port</li> <li><ul><li>$InputTCPMaxSessions <number></li></ul> Sets the maximum number of sessions supported</li><li>$InputTCPServerStreamDriverMode <number><br> -Sets the driver mode for the currently selected <a href="netstream.html">network stream driver</a>. <number> is driver specifc.</li><li>$InputTCPServerStreamDriverAuthMode <mode-string><br> +Sets the driver mode for the currently selected <a href="netstream.html">network stream driver</a>. <number> is driver specifc.</li> +<li>$InputTCPServerInputName <name><br> +Sets a name for the inputname property. If no name is set "imtcp" is used by default. Setting a +name is not strictly necessary, but can be useful to apply filtering based on which input +the message was received from. +<li>$InputTCPServerStreamDriverAuthMode <mode-string><br> Sets the authentication mode for the currently selected <a href="netstream.html">network stream driver</a>. <mode-string> is driver specifc.</li><li>$InputTCPServerStreamDriverPermittedPeer <id-string><br> Sets permitted peer IDs. Only these peers are able to connect to the listener. <id-string> semantics depend on the currently selected @@ -31,7 +59,6 @@ AuthMode and <a href="netstream.html">network stream driver</a>. Permitted <b>Caveats/Known Bugs:</b> <ul> <li>module always binds to all interfaces</li> -<li>only a single listener can be bound</li> <li>can not be loaded together with <a href="imgssapi.html">imgssapi</a> (which includes the functionality of imtcp)</li> </ul> diff --git a/doc/imuxsock.html b/doc/imuxsock.html index 77491992..472470a0 100644 --- a/doc/imuxsock.html +++ b/doc/imuxsock.html @@ -4,6 +4,8 @@ <title>Unix Socket Input</title> </head> <body> +<a href="rsyslog_conf_modules.html">back</a> + <h1>Unix Socket Input</h1> <p><b>Module Name: imuxsock</b></p> <p><b>Author: </b>Rainer Gerhards diff --git a/doc/log_rotation_fix_size.html b/doc/log_rotation_fix_size.html index 0b9a3b2e..190b24cb 100644 --- a/doc/log_rotation_fix_size.html +++ b/doc/log_rotation_fix_size.html @@ -3,6 +3,8 @@ <meta name="KEYWORDS" content="log rotation, howto, guide, fixed-size log"> </head> <body> +<a href="rsyslog_conf_output.html">back</a> + <h1>Log rotation with rsyslog</h1> <P><small><i>Written by Michael Meckelein</i></small></P> @@ -54,6 +56,14 @@ file and fill it up with new logs. So the latest logs are always in log_roatatio <p>With this approach two files for logging are used, each with a maximum size of 50 MB. So we can say we have successfully configured a log rotation which satisfies our requirement. We keep the logs at a fixed-size level of100 MB.</p> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> </body> </html> diff --git a/doc/manual.html b/doc/manual.html index 22fd63b8..5d43cb25 100644 --- a/doc/manual.html +++ b/doc/manual.html @@ -16,7 +16,10 @@ relay chains while at the same time being very easy to setup for the novice user. And as we know what enterprise users really need, there is also <a href="professional_support.html">professional rsyslog support</a> available directly from the source!</p> -<p><b>This documentation is for version 3.22.1 (v3-stable branch) of rsyslog.</b> +<p><b>Please visit the <a href="http://www.rsyslog.com/sponsors">rsyslog sponsor's page</a> +to honor the project sponsors or become one yourself!</b> We are very grateful for any help towards the +project goals.</p> +<p><b>This documentation is for version 4.4.2 (v4-stable) of rsyslog.</b> Visit the <i> <a href="http://www.rsyslog.com/doc-status.html">rsyslog status page</a></i></b> to obtain current version information and project status. </p><p><b>If you like rsyslog, you might @@ -33,8 +36,8 @@ the links below for the</b><br></p><ul> <li><a href="troubleshoot.html">troubleshooting rsyslog problems</a></li> <li><a href="rsyslog_conf.html">configuration file syntax (rsyslog.conf)</a></li> -<li> <a href="property_replacer.html">property replacer, an important core component</a></li> <li><a href="http://www.rsyslog.com/tool-regex">a regular expression checker/generator tool for rsyslog</a></li> +<li> <a href="property_replacer.html">property replacer, an important core component</a></li> <li>a commented <a href="sample.conf.html">sample rsyslog.conf</a> </li> <li><a href="bugs.html">rsyslog bug list</a></li> <li><a href="rsyslog_packages.html"> rsyslog packages</a></li> @@ -60,7 +63,11 @@ the syslog priority (severity and facility) to the log file</a></li> syslog sender over NAT</a> (online only)</li> <li><a href="gssapi.html">an overview and howto of rsyslog gssapi support</a></li> <li><a href="debug.html">debug support in rsyslog</a></li> -<li><a href="dev_queue.html">the rsyslog message queue object (developer's view)</a></li> +<li>Developer Documentation + <ul> + <li><a href="dev_oplugins.html">writing rsyslog output plugins</a></li> + <li><a href="dev_queue.html">the rsyslog message queue object (developer's view)</a></li> + </ul></li> </ul> <p>Our <a href="history.html">rsyslog history</a> page is for you if you would like to learn a little more diff --git a/doc/modules.html b/doc/modules.html index 92887508..4eae6db3 100644 --- a/doc/modules.html +++ b/doc/modules.html @@ -4,9 +4,8 @@ </head> <body> <h1>About rsyslog Modules</h1> - <P><small><i>Written by - <a href="http://www.adiscon.com/en/people/rainer-gerhards.php">Rainer - Gerhards</a> (2007-07-28)</i></small></P> +<P><small><i>Written by +<a href="http://www.adiscon.com/en/people/rainer-gerhards.php">Rainer Gerhards</a> (2007-07-28)</i></small></P> <p><font color="#FF0000"><b>This document is incomplete. The module interface is also quite incomplete and under development. Do not currently use it!</b></font> You may want to visit <a href="http://rgerhards.blogspot.com/">Rainer's blog</a> diff --git a/doc/netstream.html b/doc/netstream.html index e7d54c12..cbfa12ae 100644 --- a/doc/netstream.html +++ b/doc/netstream.html @@ -3,6 +3,8 @@ </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h1>Network Stream Drivers</h1><p>Network stream drivers are a layer between various parts of rsyslogd (e.g. the imtcp module) and the transport layer. They provide sequenced delivery, authentication and @@ -18,4 +20,4 @@ Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 3 or higher.</font></p> -</body></html>
\ No newline at end of file +</body></html> diff --git a/doc/omlibdbi.html b/doc/omlibdbi.html index 8ff74371..ec1d01b6 100644 --- a/doc/omlibdbi.html +++ b/doc/omlibdbi.html @@ -4,6 +4,8 @@ </head> <body> +<a href="rsyslog_conf_modules.html">back</a> + <h1>Generic Database Output Module (omlibdbi)</h1> <p><b>Module Name: omlibdbi</b></p> <p><b>Author: </b>Rainer Gerhards diff --git a/doc/ommail.html b/doc/ommail.html index c18cf3f8..0841dc9f 100644 --- a/doc/ommail.html +++ b/doc/ommail.html @@ -1,6 +1,6 @@ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html><head><title>mail output module - sending syslog messages via mail</title> - +<a href="features.html">back</a> </head> <body> <h1>Mail Output Module (ommail)</h1> @@ -142,4 +142,5 @@ Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 3 or higher.</font></p> + </body></html> diff --git a/doc/ommysql.html b/doc/ommysql.html index e81ce532..9b35b402 100644 --- a/doc/ommysql.html +++ b/doc/ommysql.html @@ -5,6 +5,8 @@ </head> <body> +<a href="rsyslog_conf_modules.html">back</a> + <h1>MySQL Database Output Module</h1> <p><b>Module Name: ommysql</b></p> <p><b>Author: </b>Michael Meckelein (Initial Author) / Rainer Gerhards diff --git a/doc/omoracle.html b/doc/omoracle.html new file mode 100644 index 00000000..40f6360f --- /dev/null +++ b/doc/omoracle.html @@ -0,0 +1,78 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head> +<meta http-equiv="Content-Language" content="en"> +<title>Oracle Database Output Module</title> +</head> + +<body> +<a href="rsyslog_conf_modules.html">rsyslog module reference</a> + +<h1>Oracle Database Output Module</h1> +<p><b>Module Name: omoracle</b></p> +<p><b>Author: </b>Luis Fernando Muñoz Mejías <Luis.Fernando.Munoz.Mejias@cern.ch></p> +<p><b>Available since: </b>: 4.3.0 +<p><b>Status: </b>: contributed module, not maitained by rsyslog core authors +<p><b>Description</b>:</p> +<p>This module provides native support for logging to Oracle databases. It offers +superior performance over the more generic <a href="omlibdbi.html">omlibdbi</a> module. +It also includes a number of enhancements, most importantly prepared statements and +batching, what provides a big performance improvements. +</p> +<p>Note that this module is maintained by its original author. If you need assistance with it, +it is suggested to post questions to the +<a href="http://lists.adiscon.net/mailman/listinfo/rsyslog">rsyslog mailing list</a>. +<p>From the header comments of this module: +<p><pre> + + This is an output module feeding directly to an Oracle + database. It uses Oracle Call Interface, a propietary module + provided by Oracle. + + Selector lines to be used are of this form: + + :omoracle:;TemplateName + + The module gets its configuration via rsyslog $... directives, + namely: + + $OmoracleDBUser: user name to log in on the database. + + $OmoracleDBPassword: password to log in on the database. + + $OmoracleDB: connection string (an Oracle easy connect or a db + name as specified by tnsnames.ora) + + $OmoracleBatchSize: Number of elements to send to the DB on each + transaction. + + $OmoracleStatement: Statement to be prepared and executed in + batches. Please note that Oracle's prepared statements have their + placeholders as ':identifier', and this module uses the colon to + guess how many placeholders there will be. + + All these directives are mandatory. The dbstring can be an Oracle + easystring or a DB name, as present in the tnsnames.ora file. + + The form of the template is just a list of strings you want + inserted to the DB, for instance: + + $template TestStmt,"%hostname%%msg%" + + Will provide the arguments to a statement like + + $OmoracleStatement \ + insert into foo(hostname,message)values(:host,:message) + + Also note that identifiers to placeholders are arbitrarry. You + need to define the properties on the template in the correct order + you want them passed to the statement! +</pre> +<p>[<a href="rsyslog_conf.html">rsyslog.conf overview</a>] +[<a href="manual.html">manual index</a>] [<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> +project.<br> +Copyright © 2008, 2009 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. +Released under the GNU GPL version 3 or higher.</font></p> +</body></html> diff --git a/doc/omrelp.html b/doc/omrelp.html index d5437a70..b3132d78 100644 --- a/doc/omrelp.html +++ b/doc/omrelp.html @@ -4,6 +4,8 @@ </head> <body> +<a href="rsyslog_conf_modules.html">back to rsyslog module documentation</a> + <h1>RELP Output Module (omrelp)</h1> <p><b>Module Name: omrelp</b></p> <p><b>Author: </b>Rainer Gerhards diff --git a/doc/omsnmp.html b/doc/omsnmp.html index 31aaef24..b38a594f 100644 --- a/doc/omsnmp.html +++ b/doc/omsnmp.html @@ -4,6 +4,7 @@ <title>SNMP Output Module</title></head> <body> +<a href="rsyslog_conf_modules.html">back</a> <h1>SNMP Output Module</h1> <p><b>Module Name: omsnmp</b></p> diff --git a/doc/professional_support.html b/doc/professional_support.html index 2cb6c1e1..7724ede8 100644 --- a/doc/professional_support.html +++ b/doc/professional_support.html @@ -49,6 +49,30 @@ configuration file, but will place easy to read comments in the places where you need to put them in. The agreement is governed under German law. You may also purchase this service if you would like to have your own configuration file reviewed, e.g. for auditing purposes.</p> +<h3>Local Installation Support</h3> +<p>If you intend to install rsyslog on your system but would like +to do so with minimal effort and according to your specification, you +can ask us to perform the installation for you. You get a perfect +installation, exactly like you needed, but without a need to +touch the system. This is a perfect choice for the busy administrator! +<p>In order to perform this work, we just need ssh access to your +system and the proper permissions. +<p>We charge a low one-time fee for this service. For details, please +contact <a href="mailto:info@adiscon.com">info@adiscon.com</a>. +<h3>Local Installation Maintenance</h3> +<p>If you used our services to set up the system, why not keep it +running perfectly with maintenance support? Under this contract, we +assure you run a recent build that does not interfere with your +environment and we even carry out change requests you may have. So this +is a hassle-free, everything cared about solution. +<p>Again, all we need to have is ssh access and the proper permissions +to your machine. Of course, work will only be carried out when you +expect us to do so. You are always in control of what happens. This +is a perfect outsourcing solution for those who would like to run +a great logging system but can not afford the time to keep it +in perfect shape! +<p>We charge a low monthly fee for this service. For details, please +contact <a href="mailto:info@adiscon.com">info@adiscon.com</a>. <h3>Custom Development</h3> <p>Do you need an exotic feature that otherwise would not be implemented? Do you need something really quick, quicker than it is available via @@ -85,4 +109,4 @@ Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 3 or higher.</font></p> -</body></html>
\ No newline at end of file +</body></html> diff --git a/doc/property_replacer.html b/doc/property_replacer.html index c2a0c0d2..7b604ea0 100644 --- a/doc/property_replacer.html +++ b/doc/property_replacer.html @@ -1,6 +1,7 @@ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html><head><title>The Rsyslogd Property Replacer</title></head> <body> +<a href="rsyslog_conf_templates.html">back</a> <h1>The Property Replacer</h1> <p><b>The property replacer is a core component in rsyslogd's output system.</b> A syslog message has a number of @@ -29,10 +30,6 @@ Currently supported are:</p> socket. Should be useful for debugging.</td> </tr> <tr> -<td><b>uxtradmsg</b></td> -<td>will disappear soon - do NOT use!</td> -</tr> -<tr> <td><b>hostname</b></td> <td>hostname from the message</td> </tr> @@ -228,7 +225,7 @@ sequence with a regular expression is: "%msg:R:.*Sev:. \(.*\) \[.*--end%"</p> <p>It is possible to specify some parametes after the "R". These are comma-separated. They are: -<p>R,<regexp-type>,<submatch>,<nomatch>,<match-number> +<p>R,<regexp-type>,<submatch>,<<a href="rsyslog_conf_nomatch.html">nomatch</a>>,<match-number> <p>regexp-type is either "BRE" for Posix basic regular expressions or "ERE" for extended ones. The string must be given in upper case. The default is "BRE" to be consistent with earlier versions of rsyslog that @@ -240,13 +237,8 @@ that the first match is number 0, the second 1 and so on. Up to 10 matches (up to number 9) are supported. Please note that it would be more natural to have the match-number in front of submatch, but this would break backward-compatibility. So the match-number must be specified after "nomatch". -<p>nomatch is either "DFLT", "BLANK", ZERO or "FIELD" (all upper case!). It tells -what to use if no match is found. With "DFLT", the strig "**NO MATCH**" is -used. This was the only supported value up to rsyslog 3.19.5. With "BLANK" -a blank text is used (""). With "ZERO", "0" is used. -Finally, "FIELD" uses the full property text -instead of the expression. Some folks have requested that, so it seems -to be useful. +<p><a href="rsyslog_conf_nomatch.html">nomatch</a> specifies what should +be used in case no match is found. <p>The following is a sample of an ERE expression that takes the first submatch from the message string and replaces the expression with the full field if no match is found: @@ -318,6 +310,18 @@ case-insensitive. Currently, the following options are defined: <td>convert property text to uppercase only</td> </tr> <tr> +<td valign="top"><b>csv</b></td> +<td>formats the resulting field (after all modifications) in CSV format +as specified in <a href="http://www.ietf.org/rfc/rfc4180.txt">RFC 4180</a>. +Rsyslog will always use double quotes. Note that in order to have full CSV-formatted +text, you need to define a proper template. An example is this one: +<br>$template csvline,"%syslogtag:::csv%,%msg:::csv%" +<br>Most importantly, you need to provide the commas between the fields +inside the template. +<br><i>This feature was introduced in rsyslog 4.1.6.</i> +</td> +</tr> +<tr> <td><b>drop-last-lf</b></td> <td>The last LF in the message (if any), is dropped. Especially useful for PIX.</td> @@ -410,4 +414,13 @@ to record severity and facility of a message)</li> <li><a href="rsyslog_conf.html">Configuration file syntax</a>, this is where you actually use the property replacer.</li> </ul> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008, 2009 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> + </body></html> diff --git a/doc/queue_analogy_tv.png b/doc/queue_analogy_tv.png Binary files differnew file mode 100644 index 00000000..fedcb558 --- /dev/null +++ b/doc/queue_analogy_tv.png diff --git a/doc/queues.html b/doc/queues.html index a2074d36..4a9509a0 100644 --- a/doc/queues.html +++ b/doc/queues.html @@ -1,14 +1,21 @@ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html><head> -<meta http-equiv="Content-Language" content="de"> <title>Understanding rsyslog queues</title></head> <body> +<a href="rsyslog_conf_global.html">back</a> <h1>Understanding rsyslog Queues</h1> <p>Rsyslog uses queues whenever two activities need to be loosely coupled. With a queue, one part of the system "produces" something while another part "consumes" this something. The "something" is most often syslog messages, but queues may also be used for other purposes.</p> +<p>This document provides a good insight into technical details, operation modes +and implications. In addition to it, an +<a href="queues_analogy.html">rsyslog queue concepts overview</a> document +exists which tries to explain queues with the help of some analogies. This may +probably be a better place to start reading about queues. I assume that once you +have understood that document, the material here will be much easier to grasp +and look much more natural. <p>The most prominent example is the main message queue. Whenever rsyslog receives a message (e.g. locally, via UDP, TCP or in whatever else way), it places these messages into the main message queue. Later, it is dequeued by the @@ -16,6 +23,36 @@ rule processor, which then evaluates which actions are to be carried out. In front of each action, there is also a queue, which potentially de-couples the filter processing from the actual action (e.g. writing to file, database or forwarding to another host).</p> +<h1>Where are Queues Used?</h1> +<p>Currently, queues are used for the main message queue and for the +actions.</p> +<p>There is a single main message queue inside rsyslog. Each input module +delivers messages to it. The main message queue worker filters messages based on +rules specified in rsyslog.conf and dispatches them to the individual action +queues. Once a message is in an action queue, it is deleted from the main +message queue.</p> +<p>There are multiple action queues, one for each configured action. By default, +these queues operate in direct (non-queueing) mode. Action queues are fully +configurable and thus can be changed to whatever is best for the given use case.</p> +<p>Future versions of rsyslog will most probably utilize queues at other places, +too.</p> +<p> Wherever "<i><object></i>" is used in the config file +statements, substitute "<i><object></i>" with either "MainMsg" or "Action". The +former will set main message queue +parameters, the later parameters for the next action that will be +created. Action queue parameters can not be modified once the action has been +specified. For example, to tell the main message queue to save its content on +shutdown, use <i>$MainMsgQueueSaveOnShutdown on</i>".</p> +<p>If the same parameter is specified multiple times before a queue is created, +the last one specified takes precedence. The main message queue is created after +parsing the config file and all of its potential includes. An action queue is +created each time an action selector is specified. Action queue parameters are +reset to default after an action queue has been created (to provide a clean +environment for the next action).</p> +<p>Not all queues necessarily support the full set of queue configuration +parameters, because not all are applicable. For example, in current output +module design, actions do not support multi-threading. Consequently, the number +of worker threads is fixed to one for action queues and can not be changed.</p> <h1>Queue Modes</h1> <p>Rsyslog supports different queue modes, some with submodes. Each of them has specific advantages and disadvantages. Selecting the right queue mode is quite @@ -113,8 +150,7 @@ only memory if in use. A FixedArray queue may have a too large static memory footprint in such cases.</p> <p><b>In general, it is advised to use LinkedList mode if in doubt</b>. The processing overhead compared to FixedArray is low and may be -<span style="font-size: 12pt; line-height: 115%; font-family: 'Times New Roman',serif;" lang="EN-US"> -outweigh </span>by the reduction in memory use. Paging in most-often-unused +outweigh by the reduction in memory use. Paging in most-often-unused pointer array pages can be much slower than dynamically allocating them.</p> <p>To create an in-memory queue, use the "<i>$<object>QueueType LinkedList</i>" or "<i>$<object>QueueType FixedArray</i>" config directive.</p> @@ -219,11 +255,12 @@ parall. Thus, the upper limit ca be set via "<i>$<object>QueueWorkerThread If it, for example, is set to four, no more than four workers will ever be started, no matter how many elements are enqueued. </p> <p>Worker threads that have been started are kept running until an inactivity -timeout happens. The timeout can be set via "<i>$<object>QueueWorkerTimeoutShutdown</i>" +timeout happens. The timeout can be set via "<i>$<object>QueueWorkerTimeoutThreadShutdown</i>" and is specified in milliseconds. If you do not like to keep the workers running, simply set it to 0, which means immediate timeout and thus immediate shutdown. But consider that creating threads involves some overhead, and this is -why we keep them running.</p> +why we keep them running. If you would like to never shutdown any worker +threads, specify -1 for this parameter.</p> <h2>Discarding Messages</h2> <p>If the queue reaches the so called "discard watermark" (a number of queued elements), less important messages can automatically be discarded. This is in an @@ -258,19 +295,15 @@ unavoidable and you prefer to discard less important messages first.</p> disk space, it is finally full. If so, rsyslogd throttles the data element submitter. If that, for example, is a reliable input (TCP, local log socket), that will slow down the message originator which is a good -<span style="font-size: 12pt; line-height: 115%; font-family: 'Times New Roman',serif;" lang="EN-US"> -resolution </span>for this scenario.</p> -<p>During -<span style="font-size: 12pt; line-height: 115%; font-family: 'Times New Roman',serif;" lang="EN-US"> -throtteling</span>, a disk-assisted queue continues to write to disk and +resolution for this scenario.</p> +<p>During throtteling, a disk-assisted queue continues to write to disk and messages are also discarded based on severity as well as regular dequeuing and processing continues. So chances are good the situation will be resolved by simply throttling. Note, though, that throtteling is highly undesirable for unreliable sources, like UDP message reception. So it is not a good thing to run into throtteling mode at all.</p> <p>We can not hold processing -<span style="font-size: 12pt; line-height: 115%; font-family: 'Times New Roman',serif;" lang="EN-US"> -infinitely</span>, not even when throtteling. For example, throtteling the local +infinitely, not even when throtteling. For example, throtteling the local log socket too long would cause the system at whole come to a standstill. To prevent this, rsyslogd times out after a configured period ("<i>$<object>QueueTimeoutEnqueue</i>", specified in milliseconds) if no space becomes available. As a last resort, it @@ -301,8 +334,7 @@ There are two configuration directives, both should be used together or results are unpredictable:" <i>$<object>QueueDequeueTimeBegin <hour></i>" and "<i>$<object>QueueDequeueTimeEnd <hour></i>". The hour parameter must be specified in 24-hour format (so 10pm is 22). A use case for this parameter can be found in the <a href="http://wiki.rsyslog.com/index.php/OffPeakHours">rsyslog wiki</a>. </p> <h2>Terminating Queues</h2> <p>Terminating a process sounds easy, but can be complex. -<span style="font-size: 12pt; line-height: 115%; font-family: 'Times New Roman',serif;" lang="EN-US"> -Terminating </span>a running queue is in fact the most complex operation a queue +Terminating a running queue is in fact the most complex operation a queue object can perform. You don't see that from a user's point of view, but its quite hard work for the developer to do everything in the right order.</p> <p>The complexity arises when the queue has still data enqueued when it @@ -323,38 +355,13 @@ it terminates. This includes data elements there were begun being processed by workers that needed to be cancelled due to too-long processing. For a large queue, this operation may be lengthy. No timeout applies to a required shutdown save.</p> -<h1>Where are Queues Used?</h1> -<p> Currently, queues are used for the main message queue and for the -actions.</p> -<p>There is a single main message queue inside rsyslog. Each input module -delivers messages to it. The main message queue worker filters messages based on -rules specified in rsyslog.conf and dispatches them to the individual action -queues. Once a message is in an action queue, it is deleted from the main -message queue.</p> -<p>There are multiple action queues, one for each configured action. By default, -these queues operate in direct (non-queueing) mode. Action queues are fully -configurable and thus can be changed to whatever is best for the given use case.</p> -<p>Future versions of rsyslog will most probably utilize queues at other places, -too.</p> -<p> -<span style="font-size: 12pt; line-height: 115%; font-family: 'Times New Roman',serif;" lang="EN-US"> -Wherever </span>"<i><object></i>" was used above in the config file -statements, substitute "<i><object></i>" with either "MainMsg" or "Action". The -former will set main message queue -<span style="font-size: 12pt; line-height: 115%; font-family: 'Times New Roman',serif;" lang="EN-US"> -parameters</span>, the later parameters for the next action that will be -created. Action queue parameters can not be modified once the action has been -specified. For example, to tell the main message queue to save its content on -shutdown, use <i>$MainMsgQueueSaveOnShutdown on</i>".</p> -<p>If the same parameter is specified multiple times before a queue is created, -the last one specified takes precedence. The main message queue is created after -parsing the config file and all of its potential includes. An action queue is -created each time an action selector is specified. Action queue parameters are -reset to default after an action queue has been created (to provide a clean -environment for the next action).</p> -<p>Not all queues necessarily support the full set of queue configuration -parameters, because not all are applicable. For example, in current output -module design, actions do not support multi-threading. Consequently, the number -of worker threads is fixed to one for action queues and can not be changed.</p> +[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008, 2009 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 3 or higher.</font></p> -</body></html>
\ No newline at end of file +</body></html> diff --git a/doc/queues_analogy.html b/doc/queues_analogy.html new file mode 100644 index 00000000..d7533ad5 --- /dev/null +++ b/doc/queues_analogy.html @@ -0,0 +1,259 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head> +<title>turning lanes and rsyslog queues - an analogy</title></head> +<body> +<a href="rsyslog_conf_global.html">back</a> + +<h1>Turning Lanes and Rsyslog Queues - an Analogy</h1> +<p>If there is a single object absolutely vital to understanding the way +rsyslog works, this object is queues. Queues offer a variety of services, +including support for multithreading. While there is elaborate in-depth +documentation on the ins and outs of <a href="queues.html">rsyslog queues</a>, +some of the concepts are hard to grasp even for experienced people. I think this +is because rsyslog uses a very high layer of abstraction which includes things +that look quite unnatural, like queues that do <b>not</b> actually queue... +<p>With this document, I take a different approach: I will not describe every specific +detail of queue operation but hope to be able to provide the core idea of how +queues are used in rsyslog by using an analogy. I will compare the rsyslog data flow +with real-life traffic flowing at an intersection. +<p>But first let's set the stage for the rsyslog part. The graphic below describes +the data flow inside rsyslog: +<p align="center"><img src="dataflow.png" alt="rsyslog data flow"> +<p>Note that there is a <a href="http://www.rsyslog.com/Article350.phtml">video tutorial</a> +available on the data flow. It is not perfect, but may aid in understanding this picture. +<p>For our needs, the important fact to know is that messages enter rsyslog on "the +left side" (for example, via UDP), are being preprocessed, put into the +so-called main queue, taken off that queue, be filtered and be placed into one or +several action queues (depending on filter results). They leave rsyslog on "the +right side" where output modules (like the file or database writer) consume them. +<p>So there are always <b>two</b> stages where a message (conceptually) is queued - first +in the main queue and later on in <i>n</i> action specific queues (with <i>n</i> being the number of +actions that the message in question needs to be processed by, what is being decided +by the "Filter Engine"). As such, a message will be in at least two queues +during its lifetime (with the exception of messages being discarded by the queue itself, +but for the purpose of this document, we will ignore that possibility). +<p>Also, it is vitally +important to understand that <b>each</b> action has a queue sitting in front of it. +If you have dug into the details of rsyslog configuration, you have probably seen that +a queue mode can be set for each action. And the default queue mode is the so-called +"direct mode", in which "the queue does not actually enqueue data". +That sounds silly, but is not. It is an important abstraction that helps keep the code clean. +<p>To understand this, we first need to look at who is the active component. In our data flow, +the active part always sits to the left of the object. For example, the "Preprocessor" +is being called by the inputs and calls itself into the main message queue. That is, the queue +receiver is called, it is passive. One might think that the "Parser & Filter Engine" +is an active component that actively pulls messages from the queue. This is wrong! Actually, +it is the queue that has a pool of worker threads, and these workers pull data from the queue +and then call the passively waiting Parser and Filter Engine with those messages. So the +main message queue is the active part, the Parser and Filter Engine is passive. +<p>Let's now try an analogy analogy for this part: Think about a TV show. The show is produced +in some TV studio, from there sent (actively) to a radio tower. The radio tower passively +receives from the studio and then actively sends out a signal, which is passively received +by your TV set. In our simplified view, we have the following picture: +<p align="center"><img src="queue_analogy_tv.png" alt="rsyslog queues and TV analogy"> +<p>The lower part of the picture lists the equivalent rsyslog entities, in an abstracted way. +Every queue has a producer (in the above sample the input) and a consumer (in the above sample the Parser +and Filter Engine). Their active and passive functions are equivalent to the TV entities +that are listed on top of the rsyslog entity. For example, a rsyslog consumer can never +actively initiate reception of a message in the same way a TV set cannot actively +"initiate" a TV show - both can only "handle" (display or process) +what is sent to them. +<p>Now let's look at the action queues: here, the active part, the producer, is the +Parser and Filter Engine. The passive part is the Action Processor. The later does any +processing that is necessary to call the output plugin, in particular it processes the template +to create the plugin calling parameters (either a string or vector of arguments). From the +action queue's point of view, Action Processor and Output form a single entity. Again, the +TV set analogy holds. The Output <b>does not</b> actively ask the queue for data, but +rather passively waits until the queue itself pushes some data to it. + +<p>Armed with this knowledge, we can now look at the way action queue modes work. My analogy here +is a junction, as shown below (note that the colors in the pictures below are <b>not</b> related to +the colors in the pictures above!): +<p align="center"><img src="direct_queue0.png"> +<p>This is a very simple real-life traffic case: one road joins another. We look at +traffic on the straight road, here shown by blue and green arrows. Traffic in the +opposing direction is shown in blue. Traffic flows without +any delays as long as nobody takes turns. To be more precise, if the opposing traffic takes +a (right) turn, traffic still continues to flow without delay. However, if a car in the red traffic +flow intends to do a (left, then) turn, the situation changes: +<p align="center"><img src="direct_queue1.png"> +<p>The turning car is represented by the green arrow. It cannot turn unless there is a gap +in the "blue traffic stream". And as this car blocks the roadway, the remaining +traffic (now shown in red, which should indicate the block condition), +must wait until the "green" car has made its turn. So +a queue will build up on that lane, waiting for the turn to be completed. +Note that in the examples below I do not care that much about the properties of the +opposing traffic. That is, because its structure is not really important for what I intend to +show. Think about the blue arrow as being a traffic stream that most of the time blocks +left-turners, but from time to time has a gap that is sufficiently large for a left-turn +to complete. +<p>Our road network designers know that this may be unfortunate, and for more important roads +and junctions, they came up with the concept of turning lanes: +<p align="center"><img src="direct_queue2.png"> +<p>Now, the car taking the turn can wait in a special area, the turning lane. As such, +the "straight" traffic is no longer blocked and can flow in parallel to the +turning lane (indicated by a now-green-again arrow). + +<p>However, the turning lane offers only finite space. So if too many cars intend to +take a left turn, and there is no gap in the "blue" traffic, we end up with +this well-known situation: +<p align="center"><img src="direct_queue3.png"> +<p>The turning lane is now filled up, resulting in a tailback of cars intending to +left turn on the main driving lane. The end result is that "straight" traffic +is again being blocked, just as in our initial problem case without the turning lane. +In essence, the turning lane has provided some relief, but only for a limited amount of +cars. Street system designers now try to weight cost vs. benefit and create (costly) +turning lanes that are sufficiently large to prevent traffic jams in most, but not all +cases. +<p><b>Now let's dig a bit into the mathematical properties of turning lanes.</b> We assume that +cars all have the same length. So, units of cars, the length is alsways one (which is nice, +as we don't need to care about that factor any longer ;)). A turning lane has finite capacity of +<i>n</i> cars. As long as the number of cars wanting to take a turn is less than or eqal +to <i>n</i>, "straigth traffic" is not blocked (or the other way round, traffic +is blocked if at least <i>n + 1</i> cars want to take a turn!). We can now find an optimal +value for <i>n</i>: it is a function of the probability that a car wants to turn +and the cost of the turning lane +(as well as the probability there is a gap in the "blue" traffic, but we ignore this +in our simple sample). +If we start from some finite upper bound of <i>n</i>, we can decrease +<i>n</i> to a point where it reaches zero. But let's first look at <i>n = 1</i>, in which case exactly +one car can wait on the turning lane. More than one car, and the rest of the traffic is blocked. +Our everyday logic indicates that this is actually the lowest boundary for <i>n</i>. +<p>In an abstract view, however, <i>n</i> can be zero and that works nicely. There still can be +<i>n</i> cars at any given time on the turning lane, it just happens that this means there can +be no car at all on it. And, as usual, if we have at least <i>n + 1</i> cars wanting to turn, +the main traffic flow is blocked. True, but <i>n + 1 = 0 + 1 = 1</i> so as soon as there is any +car wanting to take a turn, the main traffic flow is blocked (remember, in all cases, I assume +no sufficiently large gaps in the opposing traffic). +<p>This is the situation our everyday perception calls "road without turning lane". +In my math model, it is a "road with turning lane of size 0". The subtle difference +is important: my math model guarantees that, in an abstract sense, there always is a turning +lane, it may just be too short. But it exists, even though we don't see it. And now I can +claim that even in my small home village, all roads have turning lanes, which is rather +impressive, isn't it? ;) +<p><b>And now we finally have arrived at rsyslog's queues!</b> Rsyslog action queues exists for +all actions just like all roads in my village have turning lanes! And as in this real-life sample, +it may be hard to see the action queues for that reason. In rsyslog, the "direct" queue +mode is the equivalent to the 0-sized turning lane. And actions queues are the equivalent to turning +lanes in general, with our real-life <i>n</i> being the maximum queue size. +The main traffic line (which sometimes is blocked) is the equivalent to the +main message queue. And the periods without gaps in the opposing traffic are equivalent to +execution time of an action. In a rough sketch, the rsyslog main and action queues look like in the +following picture. +<p align="center"><img src="direct_queue_rsyslog.png"> +<p>We need to read this picture from right to left (otherwise I would need to redo all +the graphics ;)). In action 3, you see a 0-sized turning lane, aka an action queue in "direct" +mode. All other queues are run in non-direct modes, but with different sizes greater than 0. +<p>Let us first use our car analogy: +Assume we are in a car on the main lane that wants to take turn into the "action 4" +road. We pass action 1, where a number of cars wait in the turning lane and we pass +action 2, which has a slightly smaller, but still not filled up turning lane. So we pass that +without delay, too. Then we come to "action 3", which has no turning lane. Unfortunately, +the car in front of us wants to turn left into that road, so it blocks the main lane. So, this time +we need to wait. An observer standing on the sidewalk may see that while we need to wait, there are +still some cars in the "action 4" turning lane. As such, even though no new cars can +arrive on the main lane, cars still turn into the "action 4" lane. In other words, +an observer standing in "action 4" road is unable to see that traffic on the main lane +is blocked. +<p>Now on to rsyslog: Other than in the real-world traffic example, messages in rsyslog +can - at more or less the +same time - "take turns" into several roads at once. This is done by duplicating the message +if the road has a non-zero-sized "turning lane" - or in rsyslog terms a queue that is +running in any non-direct mode. If so, a deep copy of the message object is made, that placed into +the action queue and then the initial message proceeds on the "main lane". The action +queue then pushes the duplicates through action processing. This is also the reason why a +discard action inside a non-direct queue does not seem to have an effect. Actually, it discards the +copy that was just created, but the original message object continues to flow. +<p> +In action 1, we have some entries in the action queue, as we have in action 2 (where the queue is +slightly shorter). As we have seen, new messages pass action one and two almost instantaneously. +However, when a messages reaches action 3, its flow is blocked. Now, message processing must wait +for the action to complete. Processing flow in a direct mode queue is something like a U-turn: + +<p align="center"><img src="direct_queue_directq.png" alt="message processing in an rsyslog action queue in direct mode"> +<p>The message starts to execute the action and once this is done, processing flow continues. +In a real-life analogy, this may be the route of a delivery man who needs to drop a parcel +in a side street before he continues driving on the main route. As a side-note, think of what happens +with the rest of the delivery route, at least for today, if the delivery truck has a serious accident +in the side street. The rest of the parcels won't be delivered today, will they? This is exactly how the +discard action works. It drops the message object inside the action and thus the message will no +longer be available for further delivery - but as I said, only if the discard is done in a +direct mode queue (I am stressing this example because it often causes a lot of confusion). +<p>Back to the overall scenario. We have seen that messages need to wait for action 3 to +complete. Does this necessarily mean that at the same time no messages can be processed +in action 4? Well, it depends. As in the real-life scenario, action 4 will continue to +receive traffic as long as its action queue ("turn lane") is not drained. In +our drawing, it is not. So action 4 will be executed while messages still wait for action 3 +to be completed. +<p>Now look at the overall picture from a slightly different angle: +<p align="center"><img src="direct_queue_rsyslog2.png" alt="message processing in an rsyslog action queue in direct mode"> +<p>The number of all connected green and red arrows is four - one each for action 1, 2 and 3 +(this one is dotted as action 4 was a special case) and one for the "main lane" as +well as action 3 (this one contains the sole red arrow). <b>This number is the lower bound for +the number of threads in rsyslog's output system ("right-hand part" of the main message +queue)!</b> Each of the connected arrows is a continuous thread and each "turn lane" is +a place where processing is forked onto a new thread. Also, note that in action 3 the processing +is carried out on the main thread, but not in the non-direct queue modes. +<p>I have said this is "the lower bound for the number of threads...". This is with +good reason: the main queue may have more than one worker thread (individual action queues +currently do not support this, but could do in the future - there are good reasons for that, too +but exploring why would finally take us away from what we intend to see). Note that you +configure an upper bound for the number of main message queue worker threads. The actual number +varies depending on a lot of operational variables, most importantly the number of messages +inside the queue. The number <i>t_m</i> of actually running threads is within the integer-interval +[0,confLimit] (with confLimit being the operator configured limit, which defaults to 5). +Output plugins may have more than one thread created by themselves. It is quite unusual for an +output plugin to create such threads and so I assume we do not have any of these. +Then, the overall number of threads in rsyslog's filtering and output system is +<i>t_total = t_m + number of actions in non-direct modes</i>. Add the number of +inputs configured to that and you have the total number of threads running in rsyslog at +a given time (assuming again that inputs utilize only one thread per plugin, a not-so-safe +assumption). +<p>A quick side-note: I gave the lower bound for <i>t_m</i> as zero, which is somewhat in contrast +to what I wrote at the begin of the last paragraph. Zero is actually correct, because rsyslog +stops all worker threads when there is no work to do. This is also true for the action queues. +So the ultimate lower bound for a rsyslog output system without any work to carry out actually is zero. +But this bound will never be reached when there is continuous flow of activity. And, if you are +curios: if the number of workers is zero, the worker wakeup process is actually handled within the +threading context of the "left-hand-side" (or producer) of the queue. After being +started, the worker begins to play the active queue component again. All of this, of course, +can be overridden with configuration directives. +<p>When looking at the threading model, one can simply add n lanes to the main lane but otherwise +retain the traffic analogy. This is a very good description of the actual process (think what this +means to the "turning lanes"; hint: there still is only one per action!). +<p><b>Let's try to do a warp-up:</b> I have hopefully been able to show that in rsyslog, an action +queue "sits in front of" each output plugin. Messages are received and flow, from input +to output, over various stages and two level of queues to the outputs. Actions queues are always +present, but may not easily be visible when in direct mode (where no actual queuing takes place). +The "road junction with turning lane" analogy well describes the way - and intent - of the various +queue levels in rsyslog. +<p>On the output side, the queue is the active component, <b>not</b> the consumer. As such, the consumer +cannot ask the queue for anything (like n number of messages) but rather is activated by the queue +itself. As such, a queue somewhat resembles a "living thing" whereas the outputs are +just tools that this "living thing" uses. +<p><b>Note that I left out a couple of subtleties</b>, especially when it comes +to error handling and terminating +a queue (you hopefully have now at least a rough idea why I say "terminating <b>a queue</b>" +and not "terminating an action" - <i>who is the "living thing"?</i>). An action returns +a status to the queue, but it is the queue that ultimately decides which messages can finally be +considered processed and which not. Please note that the queue may even cancel an output right in +the middle of its action. This happens, if configured, if an output needs more than a configured +maximum processing time and is a guard condition to prevent slow outputs from deferring a rsyslog +restart for too long. Especially in this case re-queuing and cleanup is not trivial. Also, note that +I did not discuss disk-assisted queue modes. The basic rules apply, but there are some additional +constraints, especially in regard to the threading model. Transitioning between actual +disk-assisted mode and pure-in-memory-mode (which is done automatically when needed) is also far from +trivial and a real joy for an implementer to work on ;). +<p>If you have not done so before, it may be worth reading the +<a href="queues.html">rsyslog queue user's guide,</a> which most importantly lists all +the knobs you can turn to tweak queue operation. +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2009 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 3 or higher.</font></p> +</body> +</html> diff --git a/doc/rsconf1_actionexeconlywhenpreviousissuspended.html b/doc/rsconf1_actionexeconlywhenpreviousissuspended.html index d5cf8b14..1626b4ca 100644 --- a/doc/rsconf1_actionexeconlywhenpreviousissuspended.html +++ b/doc/rsconf1_actionexeconlywhenpreviousissuspended.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$ActionExecOnlyWhenPreviousIsSuspended</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> off</p> diff --git a/doc/rsconf1_actionresumeinterval.html b/doc/rsconf1_actionresumeinterval.html index a854a212..c0365470 100644 --- a/doc/rsconf1_actionresumeinterval.html +++ b/doc/rsconf1_actionresumeinterval.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$ActionResumeInterval</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> 30</p> @@ -27,4 +29,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_allowedsender.html b/doc/rsconf1_allowedsender.html index 4a980b89..ac39e268 100644 --- a/doc/rsconf1_allowedsender.html +++ b/doc/rsconf1_allowedsender.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$AllowedSender</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> all allowed</p> diff --git a/doc/rsconf1_controlcharacterescapeprefix.html b/doc/rsconf1_controlcharacterescapeprefix.html index 6dab1e2e..45cd9230 100644 --- a/doc/rsconf1_controlcharacterescapeprefix.html +++ b/doc/rsconf1_controlcharacterescapeprefix.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$ControlCharacterEscapePrefix</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> \</p> diff --git a/doc/rsconf1_debugprintcfsyslinehandlerlist.html b/doc/rsconf1_debugprintcfsyslinehandlerlist.html index 1aad7552..e158de43 100644 --- a/doc/rsconf1_debugprintcfsyslinehandlerlist.html +++ b/doc/rsconf1_debugprintcfsyslinehandlerlist.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$DebugPrintCFSyslineHandlerList</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> on</p> @@ -19,4 +21,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_debugprintmodulelist.html b/doc/rsconf1_debugprintmodulelist.html index 4d8e9bff..f25663fb 100644 --- a/doc/rsconf1_debugprintmodulelist.html +++ b/doc/rsconf1_debugprintmodulelist.html @@ -3,6 +3,7 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> <h2>$DebugPrintModuleList</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> on</p> @@ -19,4 +20,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_debugprinttemplatelist.html b/doc/rsconf1_debugprinttemplatelist.html index 243530e1..b5f1f28f 100644 --- a/doc/rsconf1_debugprinttemplatelist.html +++ b/doc/rsconf1_debugprinttemplatelist.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$DebugPrintTemplateList</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> on</p> @@ -19,4 +21,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_dircreatemode.html b/doc/rsconf1_dircreatemode.html index 057f53e5..b22b6c59 100644 --- a/doc/rsconf1_dircreatemode.html +++ b/doc/rsconf1_dircreatemode.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$DirCreateMode</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> 0700</p> diff --git a/doc/rsconf1_dirgroup.html b/doc/rsconf1_dirgroup.html index 4575a7e8..4bc8692f 100644 --- a/doc/rsconf1_dirgroup.html +++ b/doc/rsconf1_dirgroup.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$DirGroup</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> </p> diff --git a/doc/rsconf1_dirowner.html b/doc/rsconf1_dirowner.html index 34291856..f779c008 100644 --- a/doc/rsconf1_dirowner.html +++ b/doc/rsconf1_dirowner.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$DirOwner</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> </p> diff --git a/doc/rsconf1_dropmsgswithmaliciousdnsptrrecords.html b/doc/rsconf1_dropmsgswithmaliciousdnsptrrecords.html index e0a53ae6..95027a70 100644 --- a/doc/rsconf1_dropmsgswithmaliciousdnsptrrecords.html +++ b/doc/rsconf1_dropmsgswithmaliciousdnsptrrecords.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$DropMsgsWithMaliciousDnsPTRRecords</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> off</p> @@ -19,4 +21,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_droptrailinglfonreception.html b/doc/rsconf1_droptrailinglfonreception.html index 1e3aa8af..fb59b871 100644 --- a/doc/rsconf1_droptrailinglfonreception.html +++ b/doc/rsconf1_droptrailinglfonreception.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$DropTrailingLFOnReception</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> on</p> diff --git a/doc/rsconf1_dynafilecachesize.html b/doc/rsconf1_dynafilecachesize.html index 3813f981..cacbf6e5 100644 --- a/doc/rsconf1_dynafilecachesize.html +++ b/doc/rsconf1_dynafilecachesize.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$DynaFileCacheSize</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> 10</p> @@ -20,4 +22,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_escapecontrolcharactersonreceive.html b/doc/rsconf1_escapecontrolcharactersonreceive.html index 26917736..178f9a6f 100644 --- a/doc/rsconf1_escapecontrolcharactersonreceive.html +++ b/doc/rsconf1_escapecontrolcharactersonreceive.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$EscapeControlCharactersOnReceive</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> on</p> diff --git a/doc/rsconf1_failonchownfailure.html b/doc/rsconf1_failonchownfailure.html index 0e646e36..d8bbab82 100644 --- a/doc/rsconf1_failonchownfailure.html +++ b/doc/rsconf1_failonchownfailure.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$FailOnChownFailure</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> on</p> @@ -19,4 +21,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_filecreatemode.html b/doc/rsconf1_filecreatemode.html index c8440864..10b0317b 100644 --- a/doc/rsconf1_filecreatemode.html +++ b/doc/rsconf1_filecreatemode.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$FileCreateMode</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> 0644</p> diff --git a/doc/rsconf1_filegroup.html b/doc/rsconf1_filegroup.html index 92e4813b..935f074a 100644 --- a/doc/rsconf1_filegroup.html +++ b/doc/rsconf1_filegroup.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$FileGroup</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> </p> diff --git a/doc/rsconf1_fileowner.html b/doc/rsconf1_fileowner.html index f8d5ebf3..62125c8d 100644 --- a/doc/rsconf1_fileowner.html +++ b/doc/rsconf1_fileowner.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$FileOwner</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> </p> diff --git a/doc/rsconf1_generateconfiggraph.html b/doc/rsconf1_generateconfiggraph.html new file mode 100644 index 00000000..0b18463a --- /dev/null +++ b/doc/rsconf1_generateconfiggraph.html @@ -0,0 +1,121 @@ +<html> +<head> +<title>rsyslog.conf file</title> +</head> +<body> +<a href="rsyslog_conf_global.html">back</a> + +<h2>$GenerateConfigGraph</h2> +<p><b>Type:</b> global configuration directive</p> +<p><b>Default:</b> </p> +<p><b>Available Since:</b> 4.3.1</p> +<p><b>Description:</b></p> +<p>This directive permits to create (hopefully) good-looking visualizations of rsyslogd's +configuration. It does not affect rsyslog operation. If the directive is specified multiple +times, all but the last are ignored. If it is specified, a graph is created. This happens +both during a regular startup as well a config check run. It is recommended to include +this directive only for documentation purposes and remove it from a production +configuraton. +<p>The graph is not drawn by rsyslog itself. Instead, it uses the great open source tool +<a href="http://www.graphviz.org">Graphviz</a> to do the actual drawing. This has at least +two advantages: +<ul> +<li>the graph drawing support code in rsyslog is extremly slim and without overhead +<li>the user may change or further annotate the generated file, thus potentially +improving his documentation +</ul> +The drawback, of course, is that you need to run Graphviz once you have generated +the control file with rsyslog. Fortunately, the process to do so is rather easy: +<ol> +<li>add "$GenerateConfigGraph /path/to/file.dot" to rsyslog.conf (from now on, I +will call the file just file.dot). Optionally, add "$ActionName" statement +<b>in front of</b> those actions that you like to use friendly names with. If you do +this, keep the names short. +<li>run rsyslog at least once (either in regular or configuration check mode) +<li>remember to remove the $GenerateConfigGraph directive when you no longer need it (or +comment it out) +<li>change your working directory to where you place the dot file +<li>if you would like to edit the rsyslog-generated file, now is the time to do so +<li>do "dot -Tpng file.dot > file.png" +<li>remember that you can use "convert -resize 50% file.png resized.png" if +dot's output is too large (likely) or too small. Resizing can be especially useful if +you intend to get a rough overview over your configuration. +</ol> +After completing these steps, you should have a nice graph of your configuration. Details +are missing, but that is exactly the point. At the start of the graph is always (at least +in this version, could be improved) a node called "inputs" in a tripple hexagon +shape. This represents all inputs active in the system (assuming you have defined some, +what the current version does not check). Next comes the main queue. It is given in a +hexagon shape. That shape indicates that a queue is peresent and used to de-couple +the inbound from the outbound part of the graph. In technical terms, here is a +threading boundary. Action with "real" queues (other than in direct mode) +also utilize this shape. For actions, notice that a "hexagon action" creates +a deep copy of the message. As such, a "discard hexagon action" actually does +nothing, because it duplicates the message and then discards <b>the duplicate</b>. +At the end of the diagram, you always see a "discard" action. This indicates +that rsyslog discards messages which have been run through all available rules. +<p>Edges are labeled with information about when they are taken. For filters, the type of +filter, but not any specifics, are given. It is also indicated if no filter is +applied in the configuration file (by using a "*.*" selector). Edges without +labels are unconditionally taken. The actions themselfs are labeled with the name of +the output module that handles them. If provided, the name given via +"ActionName" is used instead. No further details are provided. +<p>If there is anything in red, this should draw your attention. In this case, rsyslogd +has detected something that does not look quite right. A typical example is a discard +action which is followed by some other actions in an action unit. Even though something +may be red, it can be valid - rsyslogd's graph generator does not yet check each and +every speciality, so the configuration may just cover a very uncommon case. +<p>Now let's look at some examples. The graph below was generated on a fairly standard +Fedora rsyslog.conf file. It had only the usually commented-out last forwarding action +activated: +<p align="center"> +<img src="rsyslog_confgraph_std.png" alt="rsyslog configuration graph for a default fedora rsyslog.conf"> +<p>This is the typical structure for a simple rsyslog configuration. There are a couple of +actions, each guarded by a filter. Messages run from top to bottom and control branches +whenever a filter evaluates to true. As there is no discard action, all messages will +run through all filters and discarded in the system default discard action right after +all configured actions. +</p> +<p>A more complex example can be seen in the next graph. This is a configuration I +created for testing the graph-creation features, so it contains a little bit of +everything. However, real-world configurations can look quite complex, too (and I +wouldn't say this one is very complex): +<p align="center"> +<img src="rsyslog_confgraph_complex.png"> +</p> +<p>Here, we have a user-defined discard action. You can immediately see this because +processing branches after the first "builtin-file" action. Those messages +where the filter evaluates to true for will never run through the left-hand action +branch. However, there is also a configuration error present: there are two more +actions (now shown red) after the discard action. As the message is discarded, these will +never be executed. Note that the discard branch contains no further filters. This is +because these actions are all part of the same action unit, which is guarded only by +an entry filter. The same is present a bit further down at the node labeled +"write_system_log_2". This note has one more special feature, that is label +was set via "ActionName", thus is does not have standard form (the same +happened to the node named "Forward" right at the top of the diagram. +Inside this diagram, the "Forward" node is executed asynchonously on its own +queue. All others are executed synchronously. +<p>Configuration graphs are useful for documenting a setup, but are also a great +<a href="troubleshoot.html">troubleshooting</a> resource. It is important to +remember that <b>these graphs are generated +from rsyslogd's in-memory action processing structures</b>. You can not get closer +to understanding on how rsyslog interpreted its configuration files. +So if the graph does not look +what you intended to do, there is probably something worng in rsyslog.conf. +<p>If something is not working as expected, but you do not spot the error immediately, +I recommend to generate a graph and zoom it so that you see all of it in one great picture. +You may not be able to read anything, but the structure should look good to you and +so you can zoom into those areas that draw your attention. +<p><b>Sample:</b></p> +<p><code><b>$DirOwner /path/to/graphfile-file.dot</b></code></p> + +<p>[<a href="rsyslog_conf.html">rsyslog.conf overview</a>] [<a href="manual.html">manual +index</a>] [<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2009 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> +</body> +</html> diff --git a/doc/rsconf1_gssforwardservicename.html b/doc/rsconf1_gssforwardservicename.html index 9d39dc2a..45d9ba98 100644 --- a/doc/rsconf1_gssforwardservicename.html +++ b/doc/rsconf1_gssforwardservicename.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$GssForwardServiceName</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> host</p> diff --git a/doc/rsconf1_gsslistenservicename.html b/doc/rsconf1_gsslistenservicename.html index cd03dc58..5fdf3edc 100644 --- a/doc/rsconf1_gsslistenservicename.html +++ b/doc/rsconf1_gsslistenservicename.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$GssListenServiceName</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> host</p> diff --git a/doc/rsconf1_gssmode.html b/doc/rsconf1_gssmode.html index 71c50696..2b1d5656 100644 --- a/doc/rsconf1_gssmode.html +++ b/doc/rsconf1_gssmode.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$GssMode</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> encryption</p> diff --git a/doc/rsconf1_includeconfig.html b/doc/rsconf1_includeconfig.html index 24462f77..132cee6f 100644 --- a/doc/rsconf1_includeconfig.html +++ b/doc/rsconf1_includeconfig.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$IncludeConfig</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> </p> @@ -43,4 +45,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_mainmsgqueuesize.html b/doc/rsconf1_mainmsgqueuesize.html index acf88e94..ffed1c09 100644 --- a/doc/rsconf1_mainmsgqueuesize.html +++ b/doc/rsconf1_mainmsgqueuesize.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$MainMsgQueueSize</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> 10000</p> diff --git a/doc/rsconf1_markmessageperiod.html b/doc/rsconf1_markmessageperiod.html index 9b6590cd..2c833339 100644 --- a/doc/rsconf1_markmessageperiod.html +++ b/doc/rsconf1_markmessageperiod.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$MarkMessagePeriod</h2> <p><b>Type:</b> specific to immark input module</p> <p><b>Default:</b> 1800 (20 minutes)</p> @@ -27,4 +29,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_maxopenfiles.html b/doc/rsconf1_maxopenfiles.html new file mode 100644 index 00000000..b6c9cc0e --- /dev/null +++ b/doc/rsconf1_maxopenfiles.html @@ -0,0 +1,35 @@ +<html> +<head> +<title>$MaxOpenFiles - rsyslog.conf file</title> +</head> +<body> +<a href="rsyslog_conf_global.html">[rsyslog configuration directive overview]</a> + +<h2>$MaxOpenFiles</h2> +<p><b>Available Since:</b> 4.3.0</p> +<p><b>Type:</b> global configuration directive</p> +<p><b>Default:</b> <i>operating system default</i></p> +<p><b>Description:</b></p> +<p>Set the maximum number of files that the rsyslog process can have open at any given +time. Note that this includes open tcp sockets, so this setting is the upper limit for +the number of open TCP connections as well. If you expect a large nubmer of concurrent +connections, it is suggested that the number is set to the max number connected plus 1000. +Please note that each dynafile also requires up to 100 open file handles. +<p>The setting is similar to running "ulimit -n number-of-files". +<p>Please note that depending on permissions and operating system configuration, the +setrlimit() request issued by rsyslog may fail, in which case the previous limit is kept +in effect. Rsyslog will emit a warning message in this case. +<p><b>Sample:</b></p> +<p><code><b>$MaxOpenFiles 2000</b></code></p> +<p><b>Bugs:</b></p> +<p>For some reason, this settings seems not to work on all platforms. If you experience +problems, please let us know so that we can (hopefully) narrow down the issue. +<p>[<a href="rsyslog_conf.html">rsyslog.conf overview</a>] [<a href="manual.html">manual +index</a>] [<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2009 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 3 or higher.</font></p> +</body> +</html> diff --git a/doc/rsconf1_moddir.html b/doc/rsconf1_moddir.html index ced07dc9..889de05d 100644 --- a/doc/rsconf1_moddir.html +++ b/doc/rsconf1_moddir.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$ModDir</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> system default for user libraries, e.g. @@ -24,4 +26,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_modload.html b/doc/rsconf1_modload.html index a2b8087a..ce457ea5 100644 --- a/doc/rsconf1_modload.html +++ b/doc/rsconf1_modload.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$ModLoad</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> </p> diff --git a/doc/rsconf1_repeatedmsgreduction.html b/doc/rsconf1_repeatedmsgreduction.html index 20e56f89..248e8343 100644 --- a/doc/rsconf1_repeatedmsgreduction.html +++ b/doc/rsconf1_repeatedmsgreduction.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$RepeatedMsgReduction</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> depending on -e</p> @@ -20,4 +22,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_resetconfigvariables.html b/doc/rsconf1_resetconfigvariables.html index 9794d158..46cf0bdf 100644 --- a/doc/rsconf1_resetconfigvariables.html +++ b/doc/rsconf1_resetconfigvariables.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$ResetConfigVariables</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> </p> @@ -19,4 +21,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rsconf1_umask.html b/doc/rsconf1_umask.html index ee47dbad..8e41e672 100644 --- a/doc/rsconf1_umask.html +++ b/doc/rsconf1_umask.html @@ -3,6 +3,8 @@ <title>rsyslog.conf file</title> </head> <body> +<a href="rsyslog_conf_global.html">back</a> + <h2>$UMASK</h2> <p><b>Type:</b> global configuration directive</p> <p><b>Default:</b> </p> @@ -21,4 +23,4 @@ Copyright © 2007 by <a href="http://www.gerhards.net/rainer">Rainer Gerhard <a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL version 2 or higher.</font></p> </body> -</html>
\ No newline at end of file +</html> diff --git a/doc/rscript_abnf.html b/doc/rscript_abnf.html index 278fb59c..d60edb5c 100644 --- a/doc/rscript_abnf.html +++ b/doc/rscript_abnf.html @@ -30,6 +30,8 @@ table... values('&$facility&','&$severity&...?]<br> endact table... values('&$facility&','&$severity&...?]<br> )<br><br>... or ...</p><p>define action writeMySQL(<br> type='ommysql.so', queue.mode='disk', queue.highwatermark = 300,<br> action.dbname='events', action.dbuser='uid',<br> [?action.template='templatename'?] or [?action.sql='insert into table... values('&$facility&','&$severity&...?]<br> )</p><p>if $message contains "error" then action writeMySQL(action.dbname='differentDB')</p><p></p><p>[<a href="rsyslog_conf.html">rsyslog.conf overview</a>] +<h2>Implementation</h2> +RainerScript will be implemented via a hand-crafted LL(1) parser. I was tempted to use yacc, but it turned out the resulting code was not thread-safe and as such did not fit within the context of rsyslog. Also, limited error handling is not a real problem for us: if there is a problem in parsing the configuration file, we stop processing. Guessing what was meant and trying to recover would IMHO not be good choices for something like a syslogd. [<a href="manual.html">manual index</a>] [<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> <p><font size="2">This documentation is part of the <a href="http://www.rsyslog.com/">rsyslog</a> diff --git a/doc/rsyslog-vers.dot b/doc/rsyslog-vers.dot new file mode 100644 index 00000000..a5563f94 --- /dev/null +++ b/doc/rsyslog-vers.dot @@ -0,0 +1,82 @@ +// This file is part of rsyslog. +// +// rsyslog "family tree" compressed version +// +// see http://www.graphviz.org for how to obtain the graphviz processor +// which is used to build the actual graph. +// +// generate the graph with +// $ dot rsyslog-vers.dot -Tpng >rsyslog-vers.png + +digraph G { + label="\n\nrsyslog \"family tree\"\nhttp://www.rsyslog.com"; + fontsize=20; + + v1stable [label="v1-stable", shape=box, style=dotted]; + v2stable [label="v2-stable", shape=box, style=filled]; + v3stable [label="v3-stable", shape=box, style=filled]; + beta [label="beta", shape=box, style=filled]; + devel [label="devel", shape=box, style=filled]; + "1.0.5" [style=dotted]; + perf [style=dashed]; + "imudp-select" [style=dashed label="imudp-\nselect"]; + msgnolock [style=dashed]; + "file-errHdlr" [style=dashed]; + solaris [style=dashed]; + tests [style=dashed]; + "0.x.y" [group=master]; + "1.10.0" [group=master]; + "1.21.2" [group=master]; + "3.10.0" [group=master]; + "3.15.1" [group=master]; + "3.17.0" [group=master]; + "3.19.x" [group=master]; + "3.21.x" [group=master]; + "4.1.0" [group=master]; + "4.1.4" [group=master]; + "4.1.5" [group=master]; + "4.1.6" [group=master]; + + sysklogd -> "0.x.y" [color=red]; + "0.x.y" -> "1.0.0"; + "0.x.y" -> "1.10.0" [color=red]; + "1.0.0" -> "1.0.5" [style=dashed]; + "1.10.0" -> "1.21.2" [color=red style=dashed]; + "1.21.2" -> "2.0.0" [color=blue]; + "2.0.0" -> "2.0.5" [style=dashed, color=blue]; + "1.21.2" -> "3.10.0" [color=red]; + "3.10.0" -> "3.15.1" [color=red style=dashed]; + "3.15.1" -> "tests"; + "3.15.1" -> "3.17.0" [color=red style=dashed]; + "3.15.1" -> "3.16.x"; + "3.16.x" -> "3.18.x" [color=blue, style=dashed]; + "3.17.0" -> "3.18.x"; + "3.17.0" -> "3.19.x" [color=red, style=dashed]; + "3.19.x" -> "3.20.x"; + "3.19.x" -> "3.21.x" [color=red]; + "3.18.x" -> debian_lenny; + "3.18.x" -> "3.20.x" [color=blue, style=dashed]; + "3.21.x" -> "3.21.11"; + "3.21.x" -> "4.1.0" [color=red]; + "3.21.x" -> "perf"; + "perf" -> "4.1.0"; + "4.1.0" -> "4.1.4" [color=red, style=dashed]; + "4.1.4" -> "file-errHdlr"; + "4.1.4" -> "4.1.5" [color=red]; + "4.1.5" -> "4.1.6" [color=red]; + "3.21.x" -> msgnolock + "3.21.x" -> "imudp-select"; + "4.1.5" -> solaris; + "file-errHdlr" -> "4.1.6"; + "tests" -> "4.1.6"; + + "1.0.5" -> v1stable [dir=none, style=dotted]; + "2.0.5" -> v2stable [dir=none, style=dotted]; + "3.20.x" -> v3stable [dir=none, style=dotted]; + "3.21.11" -> beta [dir=none, style=dotted]; + "4.1.6" -> devel [dir=none, style=dotted]; + + {rank=same; "4.1.5" "solaris"} + {rank=same; "3.18.x" "debian_lenny"} + {rank=same; "1.0.5" "2.0.5" "3.20.x" "3.21.11" "4.1.6"} +} diff --git a/doc/rsyslog-vers.png b/doc/rsyslog-vers.png Binary files differnew file mode 100644 index 00000000..e8ec8b81 --- /dev/null +++ b/doc/rsyslog-vers.png diff --git a/doc/rsyslog_conf.html b/doc/rsyslog_conf.html index 2dc8aa24..6990c6bd 100644 --- a/doc/rsyslog_conf.html +++ b/doc/rsyslog_conf.html @@ -20,243 +20,13 @@ possible. While, for obvious reasons, <a href="features.html">enhanced features</a> require a different config file syntax, rsyslogd should be able to work with a standard syslog.conf file. This is especially useful while you are migrating from syslogd to rsyslogd.</p> -<h2>Modules</h2> -<p>Rsyslog has a modular design. Consequently, there is a growing -number of modules. Here is the entry point to their documentation and -what they do (list is currently not complete)</p> -<ul> -<li><a href="omsnmp.html">omsnmp</a> - SNMP -trap output module</li> -<li><a href="omrelp.html">omrelp</a> - RELP -output module</li> -<li>omgssapi - output module for GSS-enabled syslog</li> -<li><a href="ommysql.html">ommysql</a> - output module for MySQL</li> -<li>ompgsql - output module for PostgreSQL</li> -<li><a href="omlibdbi.html">omlibdbi</a> - -generic database output module (Firebird/Interbase, MS SQL, Sybase, -SQLLite, Ingres, Oracle, mSQL)</li> -<li><a href="ommail.html">ommail</a> - -permits rsyslog to alert folks by mail if something important happens</li> -<li><a href="imfile.html">imfile</a> -- input module for text files</li> -<li><a href="imrelp.html">imrelp</a> - RELP -input module</li> -<li>imudp - udp syslog message input</li> -<li><a href="imtcp.html">imtcp</a> - input -plugin for plain tcp syslog</li> -<li><a href="imgssapi.html">imgssapi</a> - -input plugin for plain tcp and GSS-enabled syslog</li> -<li>immark - support for mark messages</li> -<li><a href="imklog.html">imklog</a> - kernel logging</li> -<li><a href="imuxsock.html">imuxsock</a> - -unix sockets, including the system log socket</li> -<li><a href="im3195.html">im3195</a> - -accepts syslog messages via RFC 3195</li> -</ul> -<p>Please note that each module provides configuration -directives, which are NOT necessarily being listed below. Also -remember, that a modules configuration directive (and functionality) is -only available if it has been loaded (using $ModLoad).</p> +<h2><a href="rsyslog_conf_modules.html">Modules</a></h2> <h2>Lines</h2> Lines can be continued by specifying a backslash ("\") as the last -character of the line.<br> -<h2>Global Directives</h2> -<p>All global directives need to be specified on a line by their -own and must start with a dollar-sign. Here is a list in alphabetical -order. Follow links for a description.</p> -<p>Not all directives have an in-depth description right now. -Default values for them are in bold. A more in-depth description will -appear as implementation progresses. Directives may change during that -process, we will NOT try hard to maintain backwards compatibility -(after all, v3 is still very early in development and quite -unstable...). So you have been warned ;)</p> -<p><b>Be sure to read information about <a href="queues.html">queues in rsyslog</a></b> - -many parameter settings modify queue parameters. If in doubt, use the -default, it is usually well-chosen and applicable in most cases.</p> -<ul> -<li><a href="rsconf1_actionexeconlywhenpreviousissuspended.html">$ActionExecOnlyWhenPreviousIsSuspended</a></li> -<li>$ActionExecOnlyOnceEveryInterval <seconds> - -execute action only if the last execute is at last -<seconds> seconds in the past (more info in <a href="ommail.html">ommail</a>, -but may be used with any action)</li> -<li><i><b>$ActionExecOnlyEveryNthTime</b> <number></i> - If configured, the next action will -only be executed every n-th time. For example, if configured to 3, the first two messages -that go into the action will be dropped, the 3rd will actually cause the action to execute, -the 4th and 5th will be dropped, the 6th executed under the action, ... and so on. Note: -this setting is automatically re-set when the actual action is defined.</li> -<li><i><b>$ActionExecOnlyEveryNthTimeTimeout</b> <number-of-seconds></i> - has a meaning only if -$ActionExecOnlyEveryNthTime is also configured for the same action. If so, the timeout -setting specifies after which period the counting of "previous actions" expires and -a new action count is begun. Specify 0 (the default) to disable timeouts. -<br> -<i>Why is this option needed?</i> Consider this case: a message comes in at, eg., 10am. That's -count 1. Then, nothing happens for the next 10 hours. At 8pm, the next -one occurs. That's count 2. Another 5 hours later, the next message -occurs, bringing the total count to 3. Thus, this message now triggers -the rule. -<br> -The question is if this is desired behavior? Or should the rule only be -triggered if the messages occur within an e.g. 20 minute window? If the -later is the case, you need a -<br> -$ActionExecOnlyEveryNthTimeTimeout 1200 -<br> -This directive will timeout previous messages seen if they are older -than 20 minutes. In the example above, the count would now be always 1 -and consequently no rule would ever be triggered. - -<li>$ActionFileDefaultTemplate [templateName] - sets a new default template for file actions</li> -<li>$ActionFileEnableSync [on/<span style="font-weight: bold;">off</span>] - enables file -syncing capability of omfile</li> -<li>$ActionForwardDefaultTemplate [templateName] - sets a new -default template for UDP and plain TCP forwarding action</li> -<li>$ActionGSSForwardDefaultTemplate [templateName] - sets a -new default template for GSS-API forwarding action</li> -<li>$ActionQueueCheckpointInterval <number></li> -<li>$ActionQueueDequeueSlowdown <number> [number -is timeout in <i> micro</i>seconds (1000000us is 1sec!), -default 0 (no delay). Simple rate-limiting!]</li> -<li>$ActionQueueDiscardMark <number> [default -9750]</li> -<li>$ActionQueueDiscardSeverity <number> -[*numerical* severity! default 4 (warning)]</li> -<li>$ActionQueueFileName <name></li> -<li>$ActionQueueHighWaterMark <number> [default -8000]</li> -<li>$ActionQueueImmediateShutdown [on/<b>off</b>]</li> -<li>$ActionQueueSize <number></li> -<li>$ActionQueueLowWaterMark <number> [default -2000]</li> -<li>$ActionQueueMaxFileSize <size_nbr>, default 1m</li> -<li>$ActionQueueTimeoutActionCompletion <number> -[number is timeout in ms (1000ms is 1sec!), default 1000, 0 means -immediate!]</li> -<li>$ActionQueueTimeoutEnqueue <number> [number -is timeout in ms (1000ms is 1sec!), default 2000, 0 means indefinite]</li> -<li>$ActionQueueTimeoutShutdown <number> [number -is timeout in ms (1000ms is 1sec!), default 0 (indefinite)]</li> -<li>$ActionQueueWorkerTimeoutThreadShutdown -<number> [number is timeout in ms (1000ms is 1sec!), -default 60000 (1 minute)]</li> -<li>$ActionQueueType [FixedArray/LinkedList/<b>Direct</b>/Disk]</li> -<li>$ActionQueueSaveOnShutdown [on/<b>off</b>] -</li> -<li>$ActionQueueWorkerThreads <number>, num worker threads, default 1, recommended 1</li> -<li>$ActionQueueWorkerThreadMinumumMessages <number>, default 100</li> -<li><a href="rsconf1_actionresumeinterval.html">$ActionResumeInterval</a></li> -<li>$ActionResumeRetryCount <number> [default 0, -1 means eternal]</li> -<li>$ActionSendResendLastMsgOnReconn <[on/<b>off</b>]> specifies if the last message is to be resend when a connecition broken and has been reconnedcted. May increase reliability, but comes at the risk of message duplication. -<li>$ActionSendStreamDriver <driver basename> just like $DefaultNetstreamDriver, but for the specific action. -</li><li>$ActionSendStreamDriverMode <mode>, default 0, mode to use with the stream driver -(driver-specific)</li><li>$ActionSendStreamDriverAuthMode <mode>, authentication mode to use with the stream driver. Note that this directive requires TLS -netstream drivers. For all others, it will be ignored. -(driver-specific)</li><li>$ActionSendStreamDriverPermittedPeer <ID>, accepted fingerprint (SHA1) or name of remote peer. Note that this directive requires TLS -netstream drivers. For all others, it will be ignored. -(driver-specific) -<span style="font-weight: bold;"> directive may go away</span>!</li> -<li><a href="rsconf1_allowedsender.html">$AllowedSender</a></li> -<li><a href="rsconf1_controlcharacterescapeprefix.html">$ControlCharacterEscapePrefix</a></li> -<li><a href="rsconf1_debugprintcfsyslinehandlerlist.html">$DebugPrintCFSyslineHandlerList</a></li> - -<li><a href="rsconf1_debugprintmodulelist.html">$DebugPrintModuleList</a></li> -<li><a href="rsconf1_debugprinttemplatelist.html">$DebugPrintTemplateList</a></li> -<li>$DefaultNetstreamDriver <drivername>, the default <a href="netstream.html">network stream driver</a> to use. Defaults to ptcp.$DefaultNetstreamDriverCAFile </path/to/cafile.pem></li> -<li>$DefaultNetstreamDriverCertFile </path/to/certfile.pem></li> -<li>$DefaultNetstreamDriverKeyFile </path/to/keyfile.pem></li> -<li><a href="rsconf1_dircreatemode.html">$DirCreateMode</a></li> -<li><a href="rsconf1_dirgroup.html">$DirGroup</a></li> -<li><a href="rsconf1_dirowner.html">$DirOwner</a></li> -<li><a href="rsconf1_dropmsgswithmaliciousdnsptrrecords.html">$DropMsgsWithMaliciousDnsPTRRecords</a></li> -<li><a href="rsconf1_droptrailinglfonreception.html">$DropTrailingLFOnReception</a></li> -<li><a href="rsconf1_dynafilecachesize.html">$DynaFileCacheSize</a></li> -<li><a href="rsconf1_escapecontrolcharactersonreceive.html">$EscapeControlCharactersOnReceive</a></li> -<li>$ErrorMessagesToStderr [<b>on</b>|off] - direct rsyslogd error message to stderr (in addition to other targets)</li> -<li><a href="rsconf1_failonchownfailure.html">$FailOnChownFailure</a></li> -<li><a href="rsconf1_filecreatemode.html">$FileCreateMode</a></li> -<li><a href="rsconf1_filegroup.html">$FileGroup</a></li> -<li><a href="rsconf1_fileowner.html">$FileOwner</a></li> -<li><a href="rsconf1_gssforwardservicename.html">$GssForwardServiceName</a></li> -<li><a href="rsconf1_gsslistenservicename.html">$GssListenServiceName</a></li> -<li><a href="rsconf1_gssmode.html">$GssMode</a></li> -<li><a href="rsconf1_includeconfig.html">$IncludeConfig</a></li><li>MainMsgQueueCheckpointInterval <number></li> -<li>$MainMsgQueueDequeueSlowdown <number> [number -is timeout in <i> micro</i>seconds (1000000us is 1sec!), -default 0 (no delay). Simple rate-limiting!]</li> -<li>$MainMsgQueueDiscardMark <number> [default -9750]</li> -<li>$MainMsgQueueDiscardSeverity <severity> -[either a textual or numerical severity! default 4 (warning)]</li> -<li>$MainMsgQueueFileName <name></li> -<li>$MainMsgQueueHighWaterMark <number> [default -8000]</li> -<li>$MainMsgQueueImmediateShutdown [on/<b>off</b>]</li> -<li><a href="rsconf1_mainmsgqueuesize.html">$MainMsgQueueSize</a></li> -<li>$MainMsgQueueLowWaterMark <number> [default -2000]</li> -<li>$MainMsgQueueMaxFileSize <size_nbr>, default -1m</li> -<li>$MainMsgQueueTimeoutActionCompletion -<number> [number is timeout in ms (1000ms is 1sec!), -default -1000, 0 means immediate!]</li> -<li>$MainMsgQueueTimeoutEnqueue <number> [number -is timeout in ms (1000ms is 1sec!), default 2000, 0 means indefinite]</li> -<li>$MainMsgQueueTimeoutShutdown <number> [number -is timeout in ms (1000ms is 1sec!), default 0 (indefinite)]</li> -<li>$MainMsgQueueWorkerTimeoutThreadShutdown -<number> [number is timeout in ms (1000ms is 1sec!), -default 60000 (1 minute)]</li> -<li>$MainMsgQueueType [<b>FixedArray</b>/LinkedList/Direct/Disk]</li> -<li>$MainMsgQueueSaveOnShutdown [on/<b>off</b>] -</li> -<li>$MainMsgQueueWorkerThreads <number>, num -worker threads, default 1, recommended 1</li> -<li>$MainMsgQueueWorkerThreadMinumumMessages <number>, default 100</li> -<li><a href="rsconf1_markmessageperiod.html">$MarkMessagePeriod</a> (immark)</li> -<li><b><i>$MaxMessageSize</i></b> <size_nbr>, default 2k - allows to specify maximum supported message size -(both for sending and receiving). The default -should be sufficient for almost all cases. Do not set this below 1k, as it would cause -interoperability problems with other syslog implementations.<br> -Change the setting to e.g. 32768 if you would like to -support large message sizes for IHE (32k is the current maximum -needed for IHE). I was initially tempted to set the default to 32k, -but there is a some memory footprint with the current -implementation in rsyslog. -<br>If you intend to receive Windows Event Log data (e.g. via -<a href="http://www.eventreporter.com/">EventReporter</a>), you might want to -increase this number to an even higher value, as event -log messages can be very lengthy ("$MaxMessageSize 64k" is not a bad idea). -Note: testing showed that 4k seems to be -the typical maximum for <b>UDP</b> based syslog. This is an IP stack -restriction. Not always ... but very often. If you go beyond -that value, be sure to test that rsyslogd actually does what -you think it should do ;) It is highly suggested to use a TCP based transport -instead of UDP (plain TCP syslog, RELP). This resolves the UDP stack size restrictions. -<br>Note that 2k, the current default, is the smallest size that must be -supported in order to be compliant to the upcoming new syslog RFC series. -</li> -<li><a href="rsconf1_moddir.html">$ModDir</a></li> -<li><a href="rsconf1_modload.html">$ModLoad</a></li> -<li><a href="rsconf1_repeatedmsgreduction.html">$RepeatedMsgReduction</a></li> -<li><a href="rsconf1_resetconfigvariables.html">$ResetConfigVariables</a></li> -<li>$WorkDirectory <name> (directory for spool -and other work files)</li> -<li>$UDPServerAddress <IP> (imudp) -- local IP -address (or name) the UDP listens should bind to</li> -<li>$UDPServerRun <port> (imudp) -- former --r<port> option, default 514, start UDP server on this -port, "*" means all addresses</li> -<li><a href="rsconf1_umask.html">$UMASK</a></li> -</ul> -<p><b>Where <size_nbr> is specified above,</b> -modifiers can be used after the number part. For example, 1k means -1024. Supported are k(ilo), m(ega), g(iga), t(era), p(eta) and e(xa). -Lower case letters refer to the traditional binary defintion (e.g. 1m -equals 1,048,576) whereas upper case letters refer to their new -1000-based definition (e.g 1M equals 1,000,000).</p> -<p>Numbers may include '.' and ',' for readability. So you can -for example specify either "1000" or "1,000" with the same result. -Please note that rsyslogd simply ignores the punctuation. Form it's -point of view, "1,,0.0.,.,0" also has the value 1000. </p> +character of the line. There is a hard-coded maximum line length of 4K. +If you need lines larger than that, you need to change compile-time +settings inside rsyslog and recompile. +<h2><a href="rsyslog_conf_global.html">Configuration Directives</a></h2> <h2>Basic Structure</h2> <p>Rsyslog supports standard sysklogd's configuration file format and extends it. So in general, you can take a "normal" syslog.conf and @@ -275,977 +45,15 @@ priorities belonging to the specified action.<br> <br> Lines starting with a hash mark ("#'') and empty lines are ignored. </p> -<h2>Templates</h2> -<p>Templates are a key feature of rsyslog. They allow to specify -any -format a user might want. They are also used for dynamic file name -generation. Every output in rsyslog uses templates - this holds true -for files, user messages and so on. -Please note that there is an -<a href="http://www.rsyslog.com/Article354.phtml">online tutorial on rsyslog templates</a> -available on the web. We recommend viewing it. -The database writer expects its -template to be a proper SQL statement - so this is highly customizable -too. You might ask how does all of this work when no templates at all -are specified. Good question ;) The answer is simple, though. Templates -compatible with the stock syslogd formats are hardcoded into rsyslogd. -So if no template is specified, we use one of these hardcoded -templates. Search for "template_" in syslogd.c and you will find the -hardcoded ones.</p> -<p>A template consists of a template directive, a name, the -actual template text and optional options. A sample is:</p> -<blockquote><code>$template MyTemplateName,"\7Text -%property% some more text\n",<options></code></blockquote> -<p>The "$template" is the template directive. It tells rsyslog -that this line contains a template. "MyTemplateName" is the template -name. All -other config lines refer to this name. The text within quotes is the -actual template text. The backslash is an escape character, much as it -is in C. It does all these "cool" things. For example, \7 rings the -bell (this is an ASCII value), \n is a new line. C programmers and perl -coders have the advantage of knowing this, but the set in rsyslog is a -bit restricted currently. -</p> -<p>All text in the template is used literally, except for things -within percent signs. These are properties and allow you access to the -contents of the syslog message. Properties are accessed via the -property replacer (nice name, huh) and it can do cool things, too. For -example, it can pick a substring or do date-specific formatting. More -on this is below, on some lines of the property replacer.<br> -<br> -The <options> part is optional. It carries options -influencing the template as whole. See details below. Be sure NOT to -mistake template options with property options - the later ones are -processed by the property replacer and apply to a SINGLE property, only -(and not the whole template).<br> -<br> -Template options are case-insensitive. Currently defined are: </p> -<p><b>sql</b> - format the string suitable for a SQL -statement in MySQL format. This will replace single quotes ("'") and -the backslash character by their backslash-escaped counterpart ("\'" -and "\\") inside each field. Please note that in MySQL configuration, -the <code class="literal">NO_BACKSLASH_ESCAPES</code> -mode must be turned off for this format to work (this is the default).</p> -<p><b>stdsql</b> - format the string suitable for a -SQL statement that is to be sent to a standards-compliant sql server. -This will replace single quotes ("'") by two single quotes ("''") -inside each field. You must use stdsql together with MySQL if in MySQL -configuration the -<code class="literal">NO_BACKSLASH_ESCAPES</code> is -turned on.</p> -<p>Either the <b>sql</b> or <b>stdsql</b> -option <b>must</b> be specified when a template is used -for writing to a database, otherwise injection might occur. Please note -that due to the unfortunate fact that several vendors have violated the -sql standard and introduced their own escape methods, it is impossible -to have a single option doing all the work. So you yourself -must make sure you are using the right format. <b>If you choose -the wrong one, you are still vulnerable to sql injection.</b><br> -<br> -Please note that the database writer *checks* that the sql option is -present in the template. If it is not present, the write database -action is disabled. This is to guard you against accidental forgetting -it and then becoming vulnerable to SQL injection. The sql option can -also be useful with files - especially if you want to import them into -a database on another machine for performance reasons. However, do NOT -use it if you do not have a real need for it - among others, it takes -some toll on the processing time. Not much, but on a really busy system -you might notice it ;)</p> -<p>The default template for the write to database action has the -sql option set. As we currently support only MySQL and the sql option -matches the default MySQL configuration, this is a good choice. -However, if you have turned on -<code class="literal">NO_BACKSLASH_ESCAPES</code> in -your MySQL config, you need to supply a template with the stdsql -option. Otherwise you will become vulnerable to SQL injection. <br> -<br> -To escape:<br> -% = \%<br> -\ = \\ --> '\' is used to escape (as in C)<br> -$template TraditionalFormat,%timegenerated% %HOSTNAME% -%syslogtag%%msg%\n"<br> -<br> -Properties can be accessed by the <a href="property_replacer.html">property -replacer</a> (see there for details).</p> -<p><b>Please note that templates can also by -used to generate selector lines with dynamic file names.</b> For -example, if you would like to split syslog messages from different -hosts to different files (one per host), you can define the following -template:</p> -<blockquote><code>$template -DynFile,"/var/log/system-%HOSTNAME%.log"</code></blockquote> -<p>This template can then be used when defining an output -selector line. It will result in something like -"/var/log/system-localhost.log"</p> -<p>Template -names beginning with "RSYSLOG_" are reserved for rsyslog use. Do NOT -use them if, otherwise you may receive a conflict in the future (and -quite unpredictable behaviour). There is a small set of pre-defined -templates that you can use without the need to define it:</p> -<ul> -<li><span style="font-weight: bold;">RSYSLOG_TraditionalFileFormat</span> -- the "old style" default log file format with low-precision timestamps</li> -<li><span style="font-weight: bold;">RSYSLOG_FileFormat</span> -- a modern-style logfile format similar to TraditionalFileFormat, buth -with high-precision timestamps and timezone information</li> -<li><span style="font-weight: bold;">RSYSLOG_TraditionalForwardFormat</span> -- the traditional forwarding format with low-precision timestamps. Most -useful if you send messages to other syslogd's or rsyslogd -below -version 3.12.5.</li> -<li><span style="font-weight: bold;">RSYSLOG_ForwardFormat</span> -- a new high-precision forwarding format very similar to the -traditional one, but with high-precision timestamps and timezone -information. Recommended to be used when sending messages to rsyslog -3.12.5 or above.</li> -<li><span style="font-weight: bold;">RSYSLOG_SyslogProtocol23Format</span> -- the format specified in IETF's internet-draft -ietf-syslog-protocol-23, which is assumed to be come the new syslog -standard RFC. This format includes several improvements. The rsyslog -message parser understands this format, so you can use it together with -all relatively recent versions of rsyslog. Other syslogd's may get -hopelessly confused if receiving that format, so check before you use -it. Note that the format is unlikely to change when the final RFC comes -out, but this may happen.</li> -<li><span style="font-weight: bold;">RSYSLOG_DebugFormat</span> -- a special format used for troubleshooting property problems. This format -is meant to be written to a log file. Do <b>not</b> use for production or remote -forwarding.</li> -</ul> -<h2>Output Channels</h2> -<p>Output Channels are a new concept first introduced in rsyslog -0.9.0. <b>As of this writing, it is most likely that they will -be replaced by something different in the future.</b> So if you -use them, be prepared to change you configuration file syntax when you -upgrade to a later release.<br> -<br> -The idea behind output channel definitions is that it shall provide an -umbrella for any type of output that the user might want. In essence,<br> -this is the "file" part of selector lines (and this is why we are not -sure output channel syntax will stay after the next review). There is a<br> -difference, though: selector channels both have filter conditions -(currently facility and severity) as well as the output destination. -Output channels define the output definition, only. As of this build, -they can only be used to write to files - not pipes, ttys or whatever -else. If we stick with output channels, this will change over time.</p> -<p>In concept, an output channel includes everything needed to -know about an output actions. In practice, the current implementation -only carries<br> -a filename, a maximum file size and a command to be issued when this -file size is reached. More things might be present in future version, -which might also change the syntax of the directive.</p> -<p>Output channels are defined via an $outchannel directive. It's -syntax is as follows:<br> -<br> -$outchannel name,file-name,max-size,action-on-max-size<br> -<br> -name is the name of the output channel (not the file), file-name is the -file name to be written to, max-size the maximum allowed size and -action-on-max-size a command to be issued when the max size is reached. -This command always has exactly one parameter. The binary is that part -of action-on-max-size before the first space, its parameter is -everything behind that space.<br> -<br> -Please note that max-size is queried BEFORE writing the log message to -the file. So be sure to set this limit reasonably low so that any -message might fit. For the current release, setting it 1k lower than -you expected is helpful. The max-size must always be specified in bytes -- there are no special symbols (like 1k, 1m,...) at this point of -development.<br> -<br> -Keep in mind that $outchannel just defines a channel with "name". It -does not activate it. To do so, you must use a selector line (see -below). That selector line includes the channel name plus an $ sign in -front of it. A sample might be:<br> -<br> -*.* $mychannel<br> -<br> -In its current form, output channels primarily provide the ability to -size-limit an output file. To do so, specify a maximum size. When this -size is reached, rsyslogd will execute the action-on-max-size command -and then reopen the file and retry. The command should be something -like a <a href="log_rotation_fix_size.html">log rotation -script</a> or a similar thing.</p> -<p>If there is no action-on-max-size command or the command did -not resolve the situation, the file is closed and never reopened by -rsyslogd (except, of course, by huping it). This logic was integrated -when we first experienced severe issues with files larger 2gb, which -could lead to rsyslogd dumping core. In such cases, it is more -appropriate to stop writing to a single file. Meanwhile, rsyslogd has -been fixed to support files larger 2gb, but obviously only on file -systems and operating system versions that do so. So it can still make -sense to enforce a 2gb file size limit.</p> -<h2>Filter Conditions</h2> -<p>Rsyslog offers four different types "filter conditions":</p> -<ul> -<li>BSD-style blocks</li> -<li>"traditional" severity and facility based selectors</li> -<li>property-based filters</li> -<li>expression-based filters</li> -</ul> -<h3>Blocks</h3> -<p>Rsyslogd supports BSD-style blocks inside rsyslog.conf. Each -block of lines is separated from the previous block by a program or -hostname specification. A block will only log messages corresponding to -the most recent program and hostname specifications given. Thus, a -block which selects ‘ppp’ as the program, directly followed by a block -that selects messages from the hostname ‘dialhost’, then the second -block will only log messages from the ppp program on dialhost. -</p> -<p>A program specification is a line beginning with ‘!prog’ and -the following blocks will be associated with calls to syslog from that -specific program. A program specification for ‘foo’ will also match any -message logged by the kernel with the prefix ‘foo: ’. Alternatively, a -program specification ‘-foo’ causes the following blocks to be applied -to messages from any program but the one specified. A hostname -specification of the form ‘+hostname’ and the following blocks will be -applied to messages received from the specified hostname. -Alternatively, a hostname specification ‘-hostname’ causes the -following blocks to be applied to messages from any host but the one -specified. If the hostname is given as ‘@’, the local hostname will be -used. (NOT YET IMPLEMENTED) A program or hostname specification may be -reset by giving the program or hostname as ‘*’.</p> -<p>Please note that the "#!prog", "#+hostname" and "#-hostname" -syntax available in BSD syslogd is not supported by rsyslogd. By -default, no hostname or program is set.</p> -<h3>Selectors</h3> -<p><b>Selectors are the traditional way of filtering syslog -messages.</b> They have been kept in rsyslog with their original -syntax, because it is well-known, highly effective and also needed for -compatibility with stock syslogd configuration files. If you just need -to filter based on priority and facility, you should do this with -selector lines. They are <b>not</b> second-class citizens -in rsyslog and offer the best performance for this job.</p> -<p>The selector field itself again consists of two parts, a -facility and a priority, separated by a period (".''). Both parts are -case insensitive and can also be specified as decimal numbers, but -don't do that, you have been warned. Both facilities and priorities are -described in rsyslog(3). The names mentioned below correspond to the -similar LOG_-values in /usr/include/rsyslog.h.<br> -<br> -The facility is one of the following keywords: auth, authpriv, cron, -daemon, kern, lpr, mail, mark, news, security (same as auth), syslog, -user, uucp and local0 through local7. The keyword security should not -be used anymore and mark is only for internal use and therefore should -not be used in applications. Anyway, you may want to specify and -redirect these messages here. The facility specifies the subsystem that -produced the message, i.e. all mail programs log with the mail facility -(LOG_MAIL) if they log using syslog.<br> -<br> -The priority is one of the following keywords, in ascending order: -debug, info, notice, warning, warn (same as warning), err, error (same -as err), crit, alert, emerg, panic (same as emerg). The keywords error, -warn and panic are deprecated and should not be used anymore. The -priority defines the severity of the message.<br> -<br> -The behavior of the original BSD syslogd is that all messages of the -specified priority and higher are logged according to the given action. -Rsyslogd behaves the same, but has some extensions.<br> -<br> -In addition to the above mentioned names the rsyslogd(8) understands -the following extensions: An asterisk ("*'') stands for all facilities -or all priorities, depending on where it is used (before or after the -period). The keyword none stands for no priority of the given facility.<br> -<br> -You can specify multiple facilities with the same priority pattern in -one statement using the comma (",'') operator. You may specify as much -facilities as you want. Remember that only the facility part from such -a statement is taken, a priority part would be skipped.</p> -<p>Multiple selectors may be specified for a single action using -the semicolon (";'') separator. Remember that each selector in the -selector field is capable to overwrite the preceding ones. Using this -behavior you can exclude some priorities from the pattern.</p> -<p>Rsyslogd has a syntax extension to the original BSD source, -that makes its use more intuitively. You may precede every priority -with an equation sign ("='') to specify only this single priority and -not any of the above. You may also (both is valid, too) precede the -priority with an exclamation mark ("!'') to ignore all that -priorities, either exact this one or this and any higher priority. If -you use both extensions than the exclamation mark must occur before the -equation sign, just use it intuitively.</p> -<h3>Property-Based Filters</h3> -<p>Property-based filters are unique to rsyslogd. They allow to -filter on any property, like HOSTNAME, syslogtag and msg. A list of all -currently-supported properties can be found in the <a href="property_replacer.html">property replacer documentation</a> -(but keep in mind that only the properties, not the replacer is -supported). With this filter, each properties can be checked against a -specified value, using a specified compare operation.</p> -<p>A property-based filter must start with a colon in column 0. -This tells rsyslogd that it is the new filter type. The colon must be -followed by the property name, a comma, the name of the compare -operation to carry out, another comma and then the value to compare -against. This value must be quoted. There can be spaces and tabs -between the commas. Property names and compare operations are -case-sensitive, so "msg" works, while "MSG" is an invalid property -name. In brief, the syntax is as follows:</p> -<p><code><b>:property, [!]compare-operation, "value"</b></code></p> -<p>The following <b>compare-operations</b> are -currently supported:</p> -<table id="table1" border="1" width="100%"> -<tbody> -<tr> -<td>contains</td> -<td>Checks if the string provided in value is contained in -the property. There must be an exact match, wildcards are not supported.</td> -</tr> -<tr> -<td>isequal</td> -<td>Compares the "value" string provided and the property -contents. These two values must be exactly equal to match. The -difference to contains is that contains searches for the value anywhere -inside the property value, whereas all characters must be identical for -isequal. As such, isequal is most useful for fields like syslogtag or -FROMHOST, where you probably know the exact contents.</td> -</tr> -<tr> -<td>startswith</td> -<td>Checks if the value is found exactly at the beginning -of the property value. For example, if you search for "val" with -<p><code><b>:msg, startswith, "val"</b></code></p> -<p>it will be a match if msg contains "values are in this -message" but it won't match if the msg contains "There are values in -this message" (in the later case, contains would match). Please note -that "startswith" is by far faster than regular expressions. So even -once they are implemented, it can make very much sense -(performance-wise) to use "startswith".</p> -</td> -</tr> -<tr> -<td>regex</td> -<td>Compares the property against the provided POSIX -regular -expression.</td> -</tr> -</tbody> -</table> -<p>You can use the bang-character (!) immediately in front of a -compare-operation, the outcome of this operation is negated. For -example, if msg contains "This is an informative message", the -following sample would not match:</p> -<p><code><b>:msg, contains, "error"</b></code></p> -<p>but this one matches:</p> -<p><code><b>:msg, !contains, "error"</b></code></p> -<p>Using negation can be useful if you would like to do some -generic processing but exclude some specific events. You can use the -discard action in conjunction with that. A sample would be:</p> -<p><code><b>*.* -/var/log/allmsgs-including-informational.log<br> -:msg, contains, "informational" <font color="#ff0000" size="4">~</font> -<br> -*.* /var/log/allmsgs-but-informational.log</b></code></p> -<p>Do not overlook the red tilde in line 2! In this sample, all -messages are written to the file allmsgs-including-informational.log. -Then, all messages containing the string "informational" are discarded. -That means the config file lines below the "discard line" (number 2 in -our sample) will not be applied to this message. Then, all remaining -lines will also be written to the file allmsgs-but-informational.log.</p> -<p><b>Value</b> is a quoted string. It supports some -escape sequences:</p> -<p>\" - the quote character (e.g. "String with \"Quotes\"")<br> -\\ - the backslash character (e.g. "C:\\tmp")</p> -<p>Escape sequences always start with a backslash. Additional -escape sequences might be added in the future. Backslash characters <b>must</b> -be escaped. Any other sequence then those outlined above is invalid and -may lead to unpredictable results.</p> -<p>Probably, "msg" is the most prominent use case of property -based filters. It is the actual message text. If you would like to -filter based on some message content (e.g. the presence of a specific -code), this can be done easily by:</p> -<p><code><b>:msg, contains, "ID-4711"</b></code></p> -<p>This filter will match when the message contains the string -"ID-4711". Please note that the comparison is case-sensitive, so it -would not match if "id-4711" would be contained in the message.</p> -<p><code><b>:msg, regex, "fatal .* error"</b></code></p> -<p>This filter uses a POSIX regular expression. It matches when -the -string contains the words "fatal" and "error" with anything in between -(e.g. "fatal net error" and "fatal lib error" but not "fatal error" as -two spaces are required by the regular expression!).</p> -<p>Getting property-based filters right can sometimes be -challenging. In order to help you do it with as minimal effort as -possible, rsyslogd spits out debug information for all property-based -filters during their evaluation. To enable this, run rsyslogd in -foreground and specify the "-d" option.</p> -<p>Boolean operations inside property based filters (like -'message contains "ID17" or message contains "ID18"') are currently not -supported (except for "not" as outlined above). Please note that while -it is possible to query facility and severity via property-based -filters, it is far more advisable to use classic selectors (see above) -for those cases.</p> -<h3>Expression-Based Filters</h3> -Expression based filters allow -filtering on arbitrary complex expressions, which can include boolean, -arithmetic and string operations. Expression filters will evolve into a -full configuration scripting language. Unfortunately, their syntax will -slightly change during that process. So if you use them now, you need -to be prepared to change your configuration files some time later. -However, we try to implement the scripting facility as soon as possible -(also in respect to stage work needed). So the window of exposure is -probably not too long.<br> -<br> -Expression based filters are indicated by the keyword "if" in column 1 -of a new line. They have this format:<br> -<br> -if expr then action-part-of-selector-line<br> -<br> -"If" and "then" are fixed keywords that mus be present. "expr" is a -(potentially quite complex) expression. So the <a href="expression.h">expression documentation</a> for -details. "action-part-of-selector-line" is an action, just as you know -it (e.g. "/var/log/logfile" to write to that file).<br> -<br> -A few quick samples:<br> -<br> -<code> -*.* /var/log/file1 # the traditional way<br> -if $msg contains 'error' /var/log/errlog # the expression-based way<br> -</code> -<br> -Right now, you need to specify numerical values if you would like to -check for facilities and severity. These can be found in <a href="http://www.ietf.org/rfc/rfc3164.txt">RFC 3164</a>. -If you don't like that, you can of course also use the textual property -- just be sure to use the right one. As expression support is enhanced, -this will change. For example, if you would like to filter on message -that have facility local0, start with "DEVNAME" and have either -"error1" or "error0" in their message content, you could use the -following filter:<br> -<br> -<code> -if $syslogfacility-text == 'local0' and $msg -startswith 'DEVNAME' and ($msg contains 'error1' or $msg contains -'error0') then /var/log/somelog<br> -</code> -<br> -Please note that the above <span style="font-weight: bold;">must -all be on one line</span>! And if you would like to store all -messages except those that contain "error1" or "error0", you just need -to add a "not":<br> -<br> -<code> -if $syslogfacility-text == 'local0' and $msg -startswith 'DEVNAME' and <span style="font-weight: bold;">not</span> -($msg contains 'error1' or $msg contains -'error0') then /var/log/somelog<br> -</code> -<br> -If you would like to do case-insensitive comparisons, use -"contains_i" instead of "contains" and "startswith_i" instead of -"startswith".<br> -<br> -Note that regular expressions are currently NOT -supported in expression-based filters. These will be added later when -function support is added to the expression engine (the reason is that -regular expressions will be a separate loadable module, which requires -some more prequisites before it can be implemented).<br> -<h2>ACTIONS</h2> -<p>The action field of a rule describes what to do with the -message. In general, message content is written to a kind of "logfile". -But also other actions might be done, like writing to a database table -or forwarding to another host.<br> -<br> -Templates can be used with all actions. If used, the specified template -is used to generate the message content (instead of the default -template). To specify a template, write a semicolon after the action -value immediately followed by the template name.<br> -<br> -Beware: templates MUST be defined BEFORE they are used. It is OK to -define some templates, then use them in selector lines, define more -templates and use use them in the following selector lines. But it is -NOT permitted to use a template in a selector line that is above its -definition. If you do this, the action will be ignored.</p> -<p><b>You can have multiple actions for a single selector </b> (or -more precisely a single filter of such a selector line). Each action -must be on its own line and the line must start with an ampersand -('&') character and have no filters. An example would be</p> -<p><code><b>*.=crit rger<br> -& root<br> -& /var/log/critmsgs</b></code></p> -<p>These three lines send critical messages to the user rger and -root and also store them in /var/log/critmsgs. <b>Using multiple -actions per selector is</b> convenient and also <b>offers -a performance benefit</b>. As the filter needs to be evaluated -only once, there is less computation required to process the directive -compared to the otherwise-equal config directives below:</p> -<p><code><b>*.=crit rger<br> -*.=crit root<br> -*.=crit /var/log/critmsgs</b></code></p> -<p> </p> -<h3>Regular File</h3> -<p>Typically messages are logged to real files. The file has to -be specified with full pathname, beginning with a slash "/''.<br> -<br> -You may prefix each entry with the minus "-'' sign to omit syncing the -file after every logging. Note that you might lose information if the -system crashes right behind a write attempt. Nevertheless this might -give you back some performance, especially if you run programs that use -logging in a very verbose manner.</p> -<p>If your system is connected to a reliable UPS and you receive -lots of log data (e.g. firewall logs), it might be a very good idea to -turn of -syncing by specifying the "-" in front of the file name. </p> -<p><b>The filename can be either static </b>(always -the same) or <b>dynamic</b> (different based on message -received). The later is useful if you would automatically split -messages into different files based on some message criteria. For -example, dynamic file name selectors allow you to split messages into -different files based on the host that sent them. With dynamic file -names, everything is automatic and you do not need any filters. </p> -<p>It works via the template system. First, you define a template -for the file name. An example can be seen above in the description of -template. We will use the "DynFile" template defined there. Dynamic -filenames are indicated by specifying a questions mark "?" instead of a -slash, followed by the template name. Thus, the selector line for our -dynamic file name would look as follows:</p> -<blockquote> -<code>*.* ?DynFile</code> -</blockquote> -<p>That's all you need to do. Rsyslog will now automatically -generate file names for you and store the right messages into the right -files. Please note that the minus sign also works with dynamic file -name selectors. Thus, to avoid syncing, you may use</p> -<blockquote> -<code>*.* -?DynFile</code></blockquote> -<p>And of course you can use templates to specify the output -format:</p> -<blockquote> -<code>*.* ?DynFile;MyTemplate</code></blockquote> -<p><b>A word of caution:</b> rsyslog creates files as -needed. So if a new host is using your syslog server, rsyslog will -automatically create a new file for it.</p> -<p><b>Creating directories is also supported</b>. For -example you can use the hostname as directory and the program name as -file name:</p> -<blockquote> -<code>$template DynFile,"/var/log/%HOSTNAME%/%programname%.log"</code></blockquote> -<h3>Named Pipes</h3> -<p>This version of rsyslogd(8) has support for logging output to -named pipes (fifos). A fifo or named pipe can be used as a destination -for log messages by prepending a pipe symbol ("|'') to the name of the -file. This is handy for debugging. Note that the fifo must be created -with the mkfifo(1) command before rsyslogd(8) is started.</p> -<h3>Terminal and Console</h3> -<p>If the file you specified is a tty, special tty-handling is -done, same with /dev/console.</p> -<h3>Remote Machine</h3> -<p>Rsyslogd provides full remote logging, i.e. is able to send -messages to a remote host running rsyslogd(8) and to receive messages -from remote hosts. Using this feature you're able to control all syslog -messages on one host, if all other machines will log remotely to that. -This tears down<br> -administration needs.<br> -<br> -<b>Please note that this version of rsyslogd by default does NOT -forward messages it has received from the network to another host. -Specify the "-h" option to enable this.</b></p> -<p>To forward messages to another host, prepend the hostname with -the at sign ("@"). A single at sign means that messages will -be forwarded via UDP protocol (the standard for syslog). If you prepend -two at signs ("@@"), the messages will be transmitted via TCP. Please -note that plain TCP based syslog is not officially standardized, but -most major syslogds support it (e.g. syslog-ng or WinSyslog). The -forwarding action indicator (at-sign) can be followed by one or more -options. If they are given, they must be immediately (without a space) -following the final at sign and be enclosed in parenthesis. The -individual options must be separated by commas. The following options -are right now defined:</p> -<table id="table2" border="1" width="100%"> -<tbody> -<tr> -<td> -<p align="center"><b>z<number></b></p> -</td> -<td>Enable zlib-compression for the message. The -<number> is the compression level. It can be 1 (lowest -gain, lowest CPU overhead) to 9 (maximum compression, highest CPU -overhead). The level can also be 0, which means "no compression". If -given, the "z" option is ignored. So this does not make an awful lot of -sense. There is hardly a difference between level 1 and 9 for typical -syslog messages. You can expect a compression gain between 0% and 30% -for typical messages. Very chatty messages may compress up to 50%, but -this is seldom seen with typically traffic. Please note that rsyslogd -checks the compression gain. Messages with 60 bytes or less will never -be compressed. This is because compression gain is pretty unlikely and -we prefer to save CPU cycles. Messages over that size are always -compressed. However, it is checked if there is a gain in compression -and only if there is, the compressed message is transmitted. Otherwise, -the uncompressed messages is transmitted. This saves the receiver CPU -cycles for decompression. It also prevents small message to actually -become larger in compressed form. -<p><b>Please note that when a TCP transport is used, -compression will also turn on syslog-transport-tls framing. See the "o" -option for important information on the implications.</b></p> -<p>Compressed messages are automatically detected and -decompressed by the receiver. There is nothing that needs to be -configured on the receiver side.</p> -</td> -</tr> -<tr> -<td> -<p align="center"><b>o</b></p> -</td> -<td><b>This option is experimental. Use at your own -risk and only if you know why you need it! If in doubt, do NOT turn it -on.</b> -<p>This option is only valid for plain TCP based -transports. It selects a different framing based on IETF internet draft -syslog-transport-tls-06. This framing offers some benefits over -traditional LF-based framing. However, the standardization effort is -not yet complete. There may be changes in upcoming versions of this -standard. Rsyslog will be kept in line with the standard. There is some -chance that upcoming changes will be incompatible to the current -specification. In this case, all systems using -transport-tls framing -must be upgraded. There will be no effort made to retain compatibility -between different versions of rsyslog. The primary reason for that is -that it seems technically impossible to provide compatibility between -some of those changes. So you should take this note very serious. It is -not something we do not *like* to do (and may change our mind if enough -people beg...), it is something we most probably *can not* do for -technical reasons (aka: you can beg as much as you like, it won't -change anything...).</p> -<p>The most important implication is that compressed syslog -messages via TCP must be considered with care. Unfortunately, it is -technically impossible to transfer compressed records over traditional -syslog plain tcp transports, so you are left with two evil choices...</p> -</td> -</tr> -</tbody> -</table> -<p><br> -The hostname may be followed by a colon and the destination port.</p> -<p>The following is an example selector line with forwarding:</p> -<p>*.* @@(o,z9)192.168.0.1:1470</p> -<p>In this example, messages are forwarded via plain TCP with -experimental framing and maximum compression to the host 192.168.0.1 at -port 1470.</p> -<p>*.* @192.168.0.1</p> -<p>In the example above, messages are forwarded via UDP to the -machine 192.168.0.1, the destination port defaults to 514. Messages -will not be compressed.</p> -<p>Note that IPv6 addresses contain colons. So if an IPv6 address is specified -in the hostname part, rsyslogd could not detect where the IP address ends -and where the port starts. There is a syntax extension to support this: -put squary brackets around the address (e.g. "[2001::1]"). Square -brackets also work with real host names and IPv4 addresses, too. -<p>A valid sample to send messages to the IPv6 host 2001::1 at port 515 -is as follows: -<p>*.* @[2001::1]:515 -<p>This works with TCP, too. -<p><b>Note to sysklogd users:</b> sysklogd does <b>not</b> -support RFC 3164 format, which is the default forwarding template in -rsyslog. As such, you will experience duplicate hostnames if rsyslog is -the sender and sysklogd is the receiver. The fix is simple: you need to -use a different template. Use that one:</p> -<p class="MsoPlainText">$template -sysklogd,"<%PRI%>%TIMESTAMP% %syslogtag%%msg%\""<br> -*.* @192.168.0.1;sysklogd</p> -<h3>List of Users</h3> -<p>Usually critical messages are also directed to "root'' on -that machine. You can specify a list of users that shall get the -message by simply writing the login. You may specify more than one user -by separating them with commas (",''). If they're logged in they get -the message. Don't think a mail would be sent, that might be too late.</p> -<h3>Everyone logged on</h3> -<p>Emergency messages often go to all users currently online to -notify them that something strange is happening with the system. To -specify this wall(1)-feature use an asterisk ("*'').</p> -<h3>Call Plugin</h3> -<p>This is a generic way to call an output plugin. The plugin -must support this functionality. Actual parameters depend on the -module, so see the module's doc on what to supply. The general syntax -is as follows:</p> -<p>:modname:params;template</p> -<p>Currently, the ommysql database output module supports this -syntax (in addtion to the ">" syntax it traditionally -supported). For ommysql, the module name is "ommysql" and the params -are the traditional ones. The ;template part is not module specific, it -is generic rsyslog functionality available to all modules.</p> -<p>As an example, the ommysql module may be called as follows:</p> -<p>:ommysql:dbhost,dbname,dbuser,dbpassword;dbtemplate</p> -<p>For details, please see the "Database Table" section of this -documentation.</p> -<p>Note: as of this writing, the ":modname:" part is hardcoded -into the module. So the name to use is not necessarily the name the -module's plugin file is called.</p> -<h3>Database Table</h3> -<p>This allows logging of the message to a database table. -Currently, only MySQL databases are supported. However, other database -drivers will most probably be developed as plugins. By default, a <a href="http://www.monitorware.com/">MonitorWare</a>-compatible -schema is required for this to work. You can create that schema with -the createDB.SQL file that came with the rsyslog package. You can also<br> -use any other schema of your liking - you just need to define a proper -template and assign this template to the action.<br> -<br> -The database writer is called by specifying a greater-then sign -(">") in front of the database connect information. Immediately -after that<br> -sign the database host name must be given, a comma, the database name, -another comma, the database user, a comma and then the user's password. -If a specific template is to be used, a semicolon followed by the -template name can follow the connect information. This is as follows:<br> -<br> ->dbhost,dbname,dbuser,dbpassword;dbtemplate</p> -<p><b>Important: to use the database functionality, the -MySQL output module must be loaded in the config file</b> BEFORE -the first database table action is used. This is done by placing the</p> -<p><code><b>$ModLoad ommysql</b></code></p> -<p>directive some place above the first use of the database write -(we recommend doing at the the beginning of the config file).</p> -<h3>Discard</h3> -<p>If the discard action is carried out, the received message is -immediately discarded. No further processing of it occurs. Discard has -primarily been added to filter out messages before carrying on any -further processing. For obvious reasons, the results of "discard" are -depending on where in the configuration file it is being used. Please -note that once a message has been discarded there is no way to retrieve -it in later configuration file lines.</p> -<p>Discard can be highly effective if you want to filter out some -annoying messages that otherwise would fill your log files. To do that, -place the discard actions early in your log files. This often plays -well with property-based filters, giving you great freedom in -specifying what you do not want.</p> -<p>Discard is just the single tilde character with no further -parameters:</p> -<p>~</p> -<p>For example,</p> -<p>*.* ~</p> -<p>discards everything (ok, you can achive the same by not -running rsyslogd at all...).</p> -<h3>Output Channel</h3> -<p>Binds an output channel definition (see there for details) to -this action. Output channel actions must start with a $-sign, e.g. if -you would like to bind your output channel definition "mychannel" to -the action, use "$mychannel". Output channels support template -definitions like all all other actions.</p> -<h3>Shell Execute</h3> -<p>This executes a program in a subshell. The program is passed -the template-generated message as the only command line parameter. -Rsyslog waits until the program terminates and only then continues to -run.</p> -<p>^program-to-execute;template</p> -<p>The program-to-execute can be any valid executable. It -receives the template string as a single parameter (argv[1]).</p> -<p><b>WARNING:</b> The Shell Execute action was added -to serve an urgent need. While it is considered reasonable save when -used with some thinking, its implications must be considered. The -current implementation uses a system() call to execute the command. -This is not the best way to do it (and will hopefully changed in -further releases). Also, proper escaping of special characters is done -to prevent command injection. However, attackers always find smart ways -to circumvent escaping, so we can not say if the escaping applied will -really safe you from all hassles. Lastly, rsyslog will wait until the -shell command terminates. Thus, a program error in it (e.g. an infinite -loop) can actually disable rsyslog. Even without that, during the -programs run-time no messages are processed by rsyslog. As the IP -stacks buffers are quickly overflowed, this bears an increased risk of -message loss. You must be aware of these implications. Even though they -are severe, there are several cases where the "shell execute" action is -very useful. This is the reason why we have included it in its current -form. To mitigate its risks, always a) test your program thoroughly, b) -make sure its runtime is as short as possible (if it requires a longer -run-time, you might want to spawn your own sub-shell asynchronously), -c) apply proper firewalling so that only known senders can send syslog -messages to rsyslog. Point c) is especially important: if rsyslog is -accepting message from any hosts, chances are much higher that an -attacker might try to exploit the "shell execute" action.</p> -<h2>TEMPLATE NAME</h2> -<p>Every ACTION can be followed by a template name. If so, that -template is used for message formatting. If no name is given, a -hard-coded default template is used for the action. There can only be -one template name for each given action. The default template is -specific to each action. For a description of what a template is and -what you can do with it, see "TEMPLATES" at the top of this document.</p> -<h2>EXAMPLES</h2> -<p>Below are example for templates and selector lines. I hope +<h2><a href="rsyslog_conf_templates.html">Templates</a></h2> +<h2><a href="rsyslog_conf_output.html">Output Channels</a></h2> +<h2><a href="rsyslog_conf_filter.html">Filter Conditions</a></h2> +<h2><a href="rsyslog_conf_actions.html">Actions</a></h2> +<h2><a href="rsyslog_conf_examples.html">Examples</a></h2> +<p>Here you will find examples for templates and selector lines. I hope they are self-explanatory. If not, please see www.monitorware.com/rsyslog/ for advise.</p> -<h3>TEMPLATES</h3> -<p>Please note that the samples are split across multiple lines. -A template MUST NOT actually be split across multiple lines.<br> -<br> -A template that resembles traditional syslogd file output:<br> -$template TraditionalFormat,"%timegenerated% %HOSTNAME%<br> -%syslogtag%%msg:::drop-last-lf%\n"<br> -<br> -A template that tells you a little more about the message:<br> -$template -precise,"%syslogpriority%,%syslogfacility%,%timegenerated%,%HOSTNAME%,<br> -%syslogtag%,%msg%\n"<br> -<br> -A template for RFC 3164 format:<br> -$template RFC3164fmt,"<%PRI%>%TIMESTAMP% %HOSTNAME% -%syslogtag%%msg%"<br> -<br> -A template for the format traditonally used for user messages:<br> -$template usermsg," XXXX%syslogtag%%msg%\n\r"<br> -<br> -And a template with the traditonal wall-message format:<br> -$template wallmsg,"\r\n\7Message from syslogd@%HOSTNAME% at -%timegenerated%<br> -<br> -A template that can be used for the database write (please note the SQL<br> -template option)<br> -$template MySQLInsert,"insert iut, message, receivedat values<br> -('%iut%', '%msg:::UPPERCASE%', '%timegenerated:::date-mysql%')<br> -into systemevents\r\n", SQL<br> -<br> -The following template emulates <a href="http://www.winsyslog.com/en/">WinSyslog</a> -format (it's an <a href="http://www.adiscon.com/en/">Adiscon</a> -format, you do not feel bad if you don't know it ;)). It's interesting -to see how it takes different parts out of the date stamps. What -happens is that the date stamp is split into the actual date and time -and the these two are combined with just a comma in between them.<br> -<br> -$template WinSyslogFmt,"%HOSTNAME%,%timegenerated:1:10:date-rfc3339%,<br> -%timegenerated:12:19:date-rfc3339%,%timegenerated:1:10:date-rfc3339%,<br> -%timegenerated:12:19:date-rfc3339%,%syslogfacility%,%syslogpriority%,<br> -%syslogtag%%msg%\n"</p> -<h3>SELECTOR LINES</h3> -<p># Store critical stuff in critical<br> -#<br> -*.=crit;kern.none /var/adm/critical<br> -<br> -This will store all messages with the priority crit in the file -/var/adm/critical, except for any kernel message.<br> -<br> -<br> -# Kernel messages are first, stored in the kernel<br> -# file, critical messages and higher ones also go<br> -# to another host and to the console. Messages to<br> -# the host finlandia are forwarded in RFC 3164<br> -# format (using the template defined above).<br> -#<br> -kern.* /var/adm/kernel<br> -kern.crit @finlandia;RFC3164fmt<br> -kern.crit /dev/console<br> -kern.info;kern.!err /var/adm/kernel-info<br> -<br> -The first rule direct any message that has the kernel facility to the -file /var/adm/kernel.<br> -<br> -The second statement directs all kernel messages of the priority crit -and higher to the remote host finlandia. This is useful, because if the -host crashes and the disks get irreparable errors you might not be able -to read the stored messages. If they're on a remote host, too, you -still can try to find out the reason for the crash.<br> -<br> -The third rule directs these messages to the actual console, so the -person who works on the machine will get them, too.<br> -<br> -The fourth line tells rsyslogd to save all kernel messages that come -with priorities from info up to warning in the file -/var/adm/kernel-info. Everything from err and higher is excluded.<br> -<br> -<br> -# The tcp wrapper loggs with mail.info, we display<br> -# all the connections on tty12<br> -#<br> -mail.=info /dev/tty12<br> -<br> -This directs all messages that uses mail.info (in source LOG_MAIL | -LOG_INFO) to /dev/tty12, the 12th console. For example the tcpwrapper -tcpd(8) uses this as it's default.<br> -<br> -<br> -# Store all mail concerning stuff in a file<br> -#<br> -mail.*;mail.!=info /var/adm/mail<br> -<br> -This pattern matches all messages that come with the mail facility, -except for the info priority. These will be stored in the file -/var/adm/mail.<br> -<br> -<br> -# Log all mail.info and news.info messages to info<br> -#<br> -mail,news.=info /var/adm/info<br> -<br> -This will extract all messages that come either with mail.info or with -news.info and store them in the file /var/adm/info.<br> -<br> -<br> -# Log info and notice messages to messages file<br> -#<br> -*.=info;*.=notice;\<br> -mail.none /var/log/messages<br> -<br> -This lets rsyslogd log all messages that come with either the info or -the notice facility into the file /var/log/messages, except for all<br> -messages that use the mail facility.<br> -<br> -<br> -# Log info messages to messages file<br> -#<br> -*.=info;\<br> -mail,news.none /var/log/messages<br> -<br> -This statement causes rsyslogd to log all messages that come with the -info priority to the file /var/log/messages. But any message coming -either with the mail or the news facility will not be stored.<br> -<br> -<br> -# Emergency messages will be displayed using wall<br> -#<br> -*.=emerg *<br> -<br> -This rule tells rsyslogd to write all emergency messages to all -currently logged in users. This is the wall action.<br> -<br> -<br> -# Messages of the priority alert will be directed<br> -# to the operator<br> -#<br> -*.alert root,rgerhards<br> -<br> -This rule directs all messages with a priority of alert or higher to -the terminals of the operator, i.e. of the users "root'' and -"rgerhards'' if they're logged in.<br> -<br> -<br> -*.* @finlandia<br> -<br> -This rule would redirect all messages to a remote host called -finlandia. This is useful especially in a cluster of machines where all -syslog messages will be stored on only one machine.<br> -<br> -In the format shown above, UDP is used for transmitting the message. -The destination port is set to the default auf 514. Rsyslog is also -capable of using much more secure and reliable TCP sessions for message -forwarding. Also, the destination port can be specified. To select TCP, -simply add one additional @ in front of the host name (that is, @host -is UPD, @@host is TCP). For example:<br> -<br> -<br> -*.* @@finlandia<br> -<br> -To specify the destination port on the remote machine, use a colon -followed by the port number after the machine name. The following -forwards to port 1514 on finlandia:<br> -<br> -<br> -*.* @@finlandia:1514<br> -<br> -This syntax works both with TCP and UDP based syslog. However, you will -probably primarily need it for TCP, as there is no well-accepted port -for this transport (it is non-standard). For UDP, you can usually stick -with the default auf 514, but might want to modify it for security rea-<br> -sons. If you would like to do that, it's quite easy:<br> -<br> -<br> -*.* @finlandia:1514<br> -<br> -<br> -<br> -*.* >dbhost,dbname,dbuser,dbpassword;dbtemplate<br> -<br> -This rule writes all message to the database "dbname" hosted on -"dbhost". The login is done with user "dbuser" and password -"dbpassword". The actual table that is updated is specified within the -template (which contains the insert statement). The template is called -"dbtemplate" in this case.</p> -<p>:msg,contains,"error" @errorServer</p> -<p>This rule forwards all messages that contain the word "error" -in the msg part to the server "errorServer". Forwarding is via UDP. -Please note the colon in fron</p> -<h2>CONFIGURATION FILE SYNTAX DIFFERENCES</h2> +<h2>Configuration File Syntax Differences</h2> <p>Rsyslogd uses a slightly different syntax for its configuration file than the original BSD sources. Originally all messages of a specific priority and above were forwarded to the log @@ -1260,4 +68,15 @@ additional <a href="features.html">features</a> (like template and database support). For obvious reasons, the syntax for defining such features is available in rsyslogd, only.</p> -</body></html> + +<p>[<a href="rsyslog_conf.html">back to top</a>] +[<a href="manual.html">manual index</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008,2009 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 3 or higher.</font></p> +</body> +</html> +> diff --git a/doc/rsyslog_conf_actions.html b/doc/rsyslog_conf_actions.html new file mode 100644 index 00000000..2ef3f4b0 --- /dev/null +++ b/doc/rsyslog_conf_actions.html @@ -0,0 +1,336 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head><title>Actions - rsyslog.conf</title></head> +<body> +<p>This is a part of the rsyslog.conf documentation.</p> +<a href="rsyslog_conf.html">back</a> +<h2>Actions</h2> +<p>The action field of a rule describes what to do with the +message. In general, message content is written to a kind of "logfile". +But also other actions might be done, like writing to a database table +or forwarding to another host.<br> +<br> +Templates can be used with all actions. If used, the specified template +is used to generate the message content (instead of the default +template). To specify a template, write a semicolon after the action +value immediately followed by the template name.<br> +<br> +Beware: templates MUST be defined BEFORE they are used. It is OK to +define some templates, then use them in selector lines, define more +templates and use use them in the following selector lines. But it is +NOT permitted to use a template in a selector line that is above its +definition. If you do this, the action will be ignored.</p> +<p><b>You can have multiple actions for a single selector </b> (or +more precisely a single filter of such a selector line). Each action +must be on its own line and the line must start with an ampersand +('&') character and have no filters. An example would be</p> +<p><code><b>*.=crit rger<br> +& root<br> +& /var/log/critmsgs</b></code></p> +<p>These three lines send critical messages to the user rger and +root and also store them in /var/log/critmsgs. <b>Using multiple +actions per selector is</b> convenient and also <b>offers +a performance benefit</b>. As the filter needs to be evaluated +only once, there is less computation required to process the directive +compared to the otherwise-equal config directives below:</p> +<p><code><b>*.=crit rger<br> +*.=crit root<br> +*.=crit /var/log/critmsgs</b></code></p> +<p> </p> +<h3>Regular File</h3> +<p>Typically messages are logged to real files. The file has to +be specified with full pathname, beginning with a slash "/''.<br> +<br> +<br> +You may prefix each entry with the minus "-'' sign to omit syncing the +file after every logging. Note that you might lose information if the +system crashes right behind a write attempt. Nevertheless this might +give you back some performance, especially if you run programs that use +logging in a very verbose manner.</p> +<p>If your system is connected to a reliable UPS and you receive +lots of log data (e.g. firewall logs), it might be a very good idea to +turn of +syncing by specifying the "-" in front of the file name. </p> +<p><b>The filename can be either static </b>(always +the same) or <b>dynamic</b> (different based on message +received). The later is useful if you would automatically split +messages into different files based on some message criteria. For +example, dynamic file name selectors allow you to split messages into +different files based on the host that sent them. With dynamic file +names, everything is automatic and you do not need any filters. </p> +<p>It works via the template system. First, you define a template +for the file name. An example can be seen above in the description of +template. We will use the "DynFile" template defined there. Dynamic +filenames are indicated by specifying a questions mark "?" instead of a +slash, followed by the template name. Thus, the selector line for our +dynamic file name would look as follows:</p> +<blockquote> +<code>*.* ?DynFile</code> +</blockquote> +<p>That's all you need to do. Rsyslog will now automatically +generate file names for you and store the right messages into the right +files. Please note that the minus sign also works with dynamic file +name selectors. Thus, to avoid syncing, you may use</p> +<blockquote> +<code>*.* -?DynFile</code></blockquote> +<p>And of course you can use templates to specify the output +format:</p> +<blockquote> +<code>*.* ?DynFile;MyTemplate</code></blockquote> +<p><b>A word of caution:</b> rsyslog creates files as +needed. So if a new host is using your syslog server, rsyslog will +automatically create a new file for it.</p> +<p><b>Creating directories is also supported</b>. For +example you can use the hostname as directory and the program name as +file name:</p> +<blockquote> +<code>$template DynFile,"/var/log/%HOSTNAME%/%programname%.log"</code></blockquote> +<h3>Named Pipes</h3> +<p>This version of rsyslogd(8) has support for logging output to +named pipes (fifos). A fifo or named pipe can be used as a destination +for log messages by prepending a pipe symbol ("|'') to the name of the +file. This is handy for debugging. Note that the fifo must be created +with the mkfifo(1) command before rsyslogd(8) is started.</p> +<h3>Terminal and Console</h3> +<p>If the file you specified is a tty, special tty-handling is +done, same with /dev/console.</p> +<h3>Remote Machine</h3> +<p>Rsyslogd provides full remote logging, i.e. is able to send +messages to a remote host running rsyslogd(8) and to receive messages +from remote hosts. Using this feature you're able to control all syslog +messages on one host, if all other machines will log remotely to that. +This tears down<br> +administration needs.<br> +<br> +<b>Please note that this version of rsyslogd by default does NOT +forward messages it has received from the network to another host. +Specify the "-h" option to enable this.</b></p> +<p>To forward messages to another host, prepend the hostname with +the at sign ("@"). A single at sign means that messages will +be forwarded via UDP protocol (the standard for syslog). If you prepend +two at signs ("@@"), the messages will be transmitted via TCP. Please +note that plain TCP based syslog is not officially standardized, but +most major syslogds support it (e.g. syslog-ng or WinSyslog). The +forwarding action indicator (at-sign) can be followed by one or more +options. If they are given, they must be immediately (without a space) +following the final at sign and be enclosed in parenthesis. The +individual options must be separated by commas. The following options +are right now defined:</p> +<table id="table2" border="1" width="100%"> +<tbody> +<tr> +<td> +<p align="center"><b>z<number></b></p> +</td> +<td>Enable zlib-compression for the message. The +<number> is the compression level. It can be 1 (lowest +gain, lowest CPU overhead) to 9 (maximum compression, highest CPU +overhead). The level can also be 0, which means "no compression". If +given, the "z" option is ignored. So this does not make an awful lot of +sense. There is hardly a difference between level 1 and 9 for typical +syslog messages. You can expect a compression gain between 0% and 30% +for typical messages. Very chatty messages may compress up to 50%, but +this is seldom seen with typically traffic. Please note that rsyslogd +checks the compression gain. Messages with 60 bytes or less will never +be compressed. This is because compression gain is pretty unlikely and +we prefer to save CPU cycles. Messages over that size are always +compressed. However, it is checked if there is a gain in compression +and only if there is, the compressed message is transmitted. Otherwise, +the uncompressed messages is transmitted. This saves the receiver CPU +cycles for decompression. It also prevents small message to actually +become larger in compressed form. +<p><b>Please note that when a TCP transport is used, +compression will also turn on syslog-transport-tls framing. See the "o" +option for important information on the implications.</b></p> +<p>Compressed messages are automatically detected and +decompressed by the receiver. There is nothing that needs to be +configured on the receiver side.</p> +</td> +</tr> +<tr> +<td> +<p align="center"><b>o</b></p> +</td> +<td><b>This option is experimental. Use at your own +risk and only if you know why you need it! If in doubt, do NOT turn it +on.</b> +<p>This option is only valid for plain TCP based +transports. It selects a different framing based on IETF internet draft +syslog-transport-tls-06. This framing offers some benefits over +traditional LF-based framing. However, the standardization effort is +not yet complete. There may be changes in upcoming versions of this +standard. Rsyslog will be kept in line with the standard. There is some +chance that upcoming changes will be incompatible to the current +specification. In this case, all systems using -transport-tls framing +must be upgraded. There will be no effort made to retain compatibility +between different versions of rsyslog. The primary reason for that is +that it seems technically impossible to provide compatibility between +some of those changes. So you should take this note very serious. It is +not something we do not *like* to do (and may change our mind if enough +people beg...), it is something we most probably *can not* do for +technical reasons (aka: you can beg as much as you like, it won't +change anything...).</p> +<p>The most important implication is that compressed syslog +messages via TCP must be considered with care. Unfortunately, it is +technically impossible to transfer compressed records over traditional +syslog plain tcp transports, so you are left with two evil choices...</p> +</td> +</tr> +</tbody> +</table> +<p><br> +The hostname may be followed by a colon and the destination port.</p> +<p>The following is an example selector line with forwarding:</p> +<p>*.* @@(o,z9)192.168.0.1:1470</p> +<p>In this example, messages are forwarded via plain TCP with +experimental framing and maximum compression to the host 192.168.0.1 at +port 1470.</p> +<p>*.* @192.168.0.1</p> +<p>In the example above, messages are forwarded via UDP to the +machine 192.168.0.1, the destination port defaults to 514. Messages +will not be compressed.</p> +<p>Note that IPv6 addresses contain colons. So if an IPv6 address is specified +in the hostname part, rsyslogd could not detect where the IP address ends +and where the port starts. There is a syntax extension to support this: +put squary brackets around the address (e.g. "[2001::1]"). Square +brackets also work with real host names and IPv4 addresses, too. +<p>A valid sample to send messages to the IPv6 host 2001::1 at port 515 +is as follows: +<p>*.* @[2001::1]:515 +<p>This works with TCP, too. +<p><b>Note to sysklogd users:</b> sysklogd does <b>not</b> +support RFC 3164 format, which is the default forwarding template in +rsyslog. As such, you will experience duplicate hostnames if rsyslog is +the sender and sysklogd is the receiver. The fix is simple: you need to +use a different template. Use that one:</p> +<p class="MsoPlainText">$template +sysklogd,"<%PRI%>%TIMESTAMP% %syslogtag%%msg%\""<br> +*.* @192.168.0.1;sysklogd</p> +<h3>List of Users</h3> +<p>Usually critical messages are also directed to "root'' on +that machine. You can specify a list of users that shall get the +message by simply writing the login. You may specify more than one user +by separating them with commas (",''). If they're logged in they get +the message. Don't think a mail would be sent, that might be too late.</p> +<h3>Everyone logged on</h3> +<p>Emergency messages often go to all users currently online to +notify them that something strange is happening with the system. To +specify this wall(1)-feature use an asterisk ("*'').</p> +<h3>Call Plugin</h3> +<p>This is a generic way to call an output plugin. The plugin +must support this functionality. Actual parameters depend on the +module, so see the module's doc on what to supply. The general syntax +is as follows:</p> +<p>:modname:params;template</p> +<p>Currently, the ommysql database output module supports this +syntax (in addtion to the ">" syntax it traditionally +supported). For ommysql, the module name is "ommysql" and the params +are the traditional ones. The ;template part is not module specific, it +is generic rsyslog functionality available to all modules.</p> +<p>As an example, the ommysql module may be called as follows:</p> +<p>:ommysql:dbhost,dbname,dbuser,dbpassword;dbtemplate</p> +<p>For details, please see the "Database Table" section of this +documentation.</p> +<p>Note: as of this writing, the ":modname:" part is hardcoded +into the module. So the name to use is not necessarily the name the +module's plugin file is called.</p> +<h3>Database Table</h3> +<p>This allows logging of the message to a database table. +Currently, only MySQL databases are supported. However, other database +drivers will most probably be developed as plugins. By default, a <a href="http://www.monitorware.com/">MonitorWare</a>-compatible +schema is required for this to work. You can create that schema with +the createDB.SQL file that came with the rsyslog package. You can also<br> +use any other schema of your liking - you just need to define a proper +template and assign this template to the action.<br> +<br> +The database writer is called by specifying a greater-then sign +(">") in front of the database connect information. Immediately +after that<br> +sign the database host name must be given, a comma, the database name, +another comma, the database user, a comma and then the user's password. +If a specific template is to be used, a semicolon followed by the +template name can follow the connect information. This is as follows:<br> +<br> +>dbhost,dbname,dbuser,dbpassword;dbtemplate</p> +<p><b>Important: to use the database functionality, the +MySQL output module must be loaded in the config file</b> BEFORE +the first database table action is used. This is done by placing the</p> +<p><code><b>$ModLoad ommysql</b></code></p> +<p>directive some place above the first use of the database write +(we recommend doing at the the beginning of the config file).</p> +<h3>Discard</h3> +<p>If the discard action is carried out, the received message is +immediately discarded. No further processing of it occurs. Discard has +primarily been added to filter out messages before carrying on any +further processing. For obvious reasons, the results of "discard" are +depending on where in the configuration file it is being used. Please +note that once a message has been discarded there is no way to retrieve +it in later configuration file lines.</p> +<p>Discard can be highly effective if you want to filter out some +annoying messages that otherwise would fill your log files. To do that, +place the discard actions early in your log files. This often plays +well with property-based filters, giving you great freedom in +specifying what you do not want.</p> +<p>Discard is just the single tilde character with no further +parameters:</p> +<p>~</p> +<p>For example,</p> +<p>*.* ~</p> +<p>discards everything (ok, you can achive the same by not +running rsyslogd at all...).</p> +<h3>Output Channel</h3> +<p>Binds an output channel definition (see there for details) to +this action. Output channel actions must start with a $-sign, e.g. if +you would like to bind your output channel definition "mychannel" to +the action, use "$mychannel". Output channels support template +definitions like all all other actions.</p> +<h3>Shell Execute</h3> +<p>This executes a program in a subshell. The program is passed +the template-generated message as the only command line parameter. +Rsyslog waits until the program terminates and only then continues to +run.</p> +<p>^program-to-execute;template</p> +<p>The program-to-execute can be any valid executable. It +receives the template string as a single parameter (argv[1]).</p> +<p><b>WARNING:</b> The Shell Execute action was added +to serve an urgent need. While it is considered reasonable save when +used with some thinking, its implications must be considered. The +current implementation uses a system() call to execute the command. +This is not the best way to do it (and will hopefully changed in +further releases). Also, proper escaping of special characters is done +to prevent command injection. However, attackers always find smart ways +to circumvent escaping, so we can not say if the escaping applied will +really safe you from all hassles. Lastly, rsyslog will wait until the +shell command terminates. Thus, a program error in it (e.g. an infinite +loop) can actually disable rsyslog. Even without that, during the +programs run-time no messages are processed by rsyslog. As the IP +stacks buffers are quickly overflowed, this bears an increased risk of +message loss. You must be aware of these implications. Even though they +are severe, there are several cases where the "shell execute" action is +very useful. This is the reason why we have included it in its current +form. To mitigate its risks, always a) test your program thoroughly, b) +make sure its runtime is as short as possible (if it requires a longer +run-time, you might want to spawn your own sub-shell asynchronously), +c) apply proper firewalling so that only known senders can send syslog +messages to rsyslog. Point c) is especially important: if rsyslog is +accepting message from any hosts, chances are much higher that an +attacker might try to exploit the "shell execute" action.</p> +<h3>Template Name</h3> +<p>Every ACTION can be followed by a template name. If so, that +template is used for message formatting. If no name is given, a +hard-coded default template is used for the action. There can only be +one template name for each given action. The default template is +specific to each action. For a description of what a template is and +what you can do with it, see "TEMPLATES" at the top of this document.</p> + + +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> +</body> +</html> + diff --git a/doc/rsyslog_conf_examples.html b/doc/rsyslog_conf_examples.html new file mode 100644 index 00000000..b46460e5 --- /dev/null +++ b/doc/rsyslog_conf_examples.html @@ -0,0 +1,209 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head><title>Examples - rsyslog.conf</title></head> +<body> +<p>This is a part of the rsyslog.conf documentation.</p> +<a href="rsyslog_conf.html">back</a> +<h2>Examples</h2> +<p>Below are example for templates and selector lines. I hope +they are self-explanatory. If not, please see +www.monitorware.com/rsyslog/ for advise.</p> +<h3>TEMPLATES</h3> +<p>Please note that the samples are split across multiple lines. +A template MUST NOT actually be split across multiple lines.<br> +<br> +A template that resembles traditional syslogd file output:<br> +$template TraditionalFormat,"%timegenerated% %HOSTNAME%<br> +%syslogtag%%msg:::drop-last-lf%\n"<br> +<br> +A template that tells you a little more about the message:<br> +$template +precise,"%syslogpriority%,%syslogfacility%,%timegenerated%,%HOSTNAME%,<br> +%syslogtag%,%msg%\n"<br> +<br> +A template for RFC 3164 format:<br> +$template RFC3164fmt,"<%PRI%>%TIMESTAMP% %HOSTNAME% +%syslogtag%%msg%"<br> +<br> +A template for the format traditonally used for user messages:<br> +$template usermsg," XXXX%syslogtag%%msg%\n\r"<br> +<br> +And a template with the traditonal wall-message format:<br> +$template wallmsg,"\r\n\7Message from syslogd@%HOSTNAME% at +%timegenerated%<br> +<br> +A template that can be used for the database write (please note the SQL<br> +template option)<br> +$template MySQLInsert,"insert iut, message, receivedat values<br> +('%iut%', '%msg:::UPPERCASE%', '%timegenerated:::date-mysql%')<br> +into systemevents\r\n", SQL<br> +<br> +The following template emulates <a href="http://www.winsyslog.com/en/">WinSyslog</a> +format (it's an <a href="http://www.adiscon.com/en/">Adiscon</a> +format, you do not feel bad if you don't know it ;)). It's interesting +to see how it takes different parts out of the date stamps. What +happens is that the date stamp is split into the actual date and time +and the these two are combined with just a comma in between them.<br> +<br> +$template WinSyslogFmt,"%HOSTNAME%,%timegenerated:1:10:date-rfc3339%,<br> +%timegenerated:12:19:date-rfc3339%,%timegenerated:1:10:date-rfc3339%,<br> +%timegenerated:12:19:date-rfc3339%,%syslogfacility%,%syslogpriority%,<br> +%syslogtag%%msg%\n"</p> +<h3>SELECTOR LINES</h3> +<p># Store critical stuff in critical<br> +#<br> +*.=crit;kern.none /var/adm/critical<br> +<br> +This will store all messages with the priority crit in the file +/var/adm/critical, except for any kernel message.<br> +<br> +<br> +# Kernel messages are first, stored in the kernel<br> +# file, critical messages and higher ones also go<br> +# to another host and to the console. Messages to<br> +# the host finlandia are forwarded in RFC 3164<br> +# format (using the template defined above).<br> +#<br> +kern.* /var/adm/kernel<br> +kern.crit @finlandia;RFC3164fmt<br> +kern.crit /dev/console<br> +kern.info;kern.!err /var/adm/kernel-info<br> +<br> +The first rule direct any message that has the kernel facility to the +file /var/adm/kernel.<br> +<br> +The second statement directs all kernel messages of the priority crit +and higher to the remote host finlandia. This is useful, because if the +host crashes and the disks get irreparable errors you might not be able +to read the stored messages. If they're on a remote host, too, you +still can try to find out the reason for the crash.<br> +<br> +The third rule directs these messages to the actual console, so the +person who works on the machine will get them, too.<br> +<br> +The fourth line tells rsyslogd to save all kernel messages that come +with priorities from info up to warning in the file +/var/adm/kernel-info. Everything from err and higher is excluded.<br> +<br> +<br> +# The tcp wrapper loggs with mail.info, we display<br> +# all the connections on tty12<br> +#<br> +mail.=info /dev/tty12<br> +<br> +This directs all messages that uses mail.info (in source LOG_MAIL | +LOG_INFO) to /dev/tty12, the 12th console. For example the tcpwrapper +tcpd(8) uses this as it's default.<br> +<br> +<br> +# Store all mail concerning stuff in a file<br> +#<br> +mail.*;mail.!=info /var/adm/mail<br> +<br> +This pattern matches all messages that come with the mail facility, +except for the info priority. These will be stored in the file +/var/adm/mail.<br> +<br> +<br> +# Log all mail.info and news.info messages to info<br> +#<br> +mail,news.=info /var/adm/info<br> +<br> +This will extract all messages that come either with mail.info or with +news.info and store them in the file /var/adm/info.<br> +<br> +<br> +# Log info and notice messages to messages file<br> +#<br> +*.=info;*.=notice;\<br> +mail.none /var/log/messages<br> +<br> +This lets rsyslogd log all messages that come with either the info or +the notice facility into the file /var/log/messages, except for all<br> +messages that use the mail facility.<br> +<br> +<br> +# Log info messages to messages file<br> +#<br> +*.=info;\<br> +mail,news.none /var/log/messages<br> +<br> +This statement causes rsyslogd to log all messages that come with the +info priority to the file /var/log/messages. But any message coming +either with the mail or the news facility will not be stored.<br> +<br> +<br> +# Emergency messages will be displayed using wall<br> +#<br> +*.=emerg *<br> +<br> +This rule tells rsyslogd to write all emergency messages to all +currently logged in users. This is the wall action.<br> +<br> +<br> +# Messages of the priority alert will be directed<br> +# to the operator<br> +#<br> +*.alert root,rgerhards<br> +<br> +This rule directs all messages with a priority of alert or higher to +the terminals of the operator, i.e. of the users "root'' and +"rgerhards'' if they're logged in.<br> +<br> +<br> +*.* @finlandia<br> +<br> +This rule would redirect all messages to a remote host called +finlandia. This is useful especially in a cluster of machines where all +syslog messages will be stored on only one machine.<br> +<br> +In the format shown above, UDP is used for transmitting the message. +The destination port is set to the default auf 514. Rsyslog is also +capable of using much more secure and reliable TCP sessions for message +forwarding. Also, the destination port can be specified. To select TCP, +simply add one additional @ in front of the host name (that is, @host +is UPD, @@host is TCP). For example:<br> +<br> +<br> +*.* @@finlandia<br> +<br> +To specify the destination port on the remote machine, use a colon +followed by the port number after the machine name. The following +forwards to port 1514 on finlandia:<br> +<br> +<br> +*.* @@finlandia:1514<br> +<br> +This syntax works both with TCP and UDP based syslog. However, you will +probably primarily need it for TCP, as there is no well-accepted port +for this transport (it is non-standard). For UDP, you can usually stick +with the default auf 514, but might want to modify it for security rea-<br> +sons. If you would like to do that, it's quite easy:<br> +<br> +<br> +*.* @finlandia:1514<br> +<br> +<br> +<br> +*.* >dbhost,dbname,dbuser,dbpassword;dbtemplate<br> +<br> +This rule writes all message to the database "dbname" hosted on +"dbhost". The login is done with user "dbuser" and password +"dbpassword". The actual table that is updated is specified within the +template (which contains the insert statement). The template is called +"dbtemplate" in this case.</p> +<p>:msg,contains,"error" @errorServer</p> +<p>This rule forwards all messages that contain the word "error" +in the msg part to the server "errorServer". Forwarding is via UDP. +Please note the colon in fron</p> + +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> +</body> +</html> + diff --git a/doc/rsyslog_conf_filter.html b/doc/rsyslog_conf_filter.html new file mode 100644 index 00000000..1d30d8ae --- /dev/null +++ b/doc/rsyslog_conf_filter.html @@ -0,0 +1,284 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head><title>Filter Conditions - rsyslog.conf</title></head> +<body> +<p>This is a part of the rsyslog.conf documentation.</p> +<a href="rsyslog_conf.html">back</a> +<h2>Filter Conditions</h2> +<p>Rsyslog offers four different types "filter conditions":</p> +<ul> +<li>BSD-style blocks</li> +<li>"traditional" severity and facility based selectors</li> +<li>property-based filters</li> +<li>expression-based filters</li> +</ul> +<h3>Blocks</h3> +<p>Rsyslogd supports BSD-style blocks inside rsyslog.conf. Each +block of lines is separated from the previous block by a program or +hostname specification. A block will only log messages corresponding to +the most recent program and hostname specifications given. Thus, a +block which selects ‘ppp’ as the program, directly followed by a block +that selects messages from the hostname ‘dialhost’, then the second +block will only log messages from the ppp program on dialhost. +</p> +<p>A program specification is a line beginning with ‘!prog’ and +the following blocks will be associated with calls to syslog from that +specific program. A program specification for ‘foo’ will also match any +message logged by the kernel with the prefix ‘foo: ’. Alternatively, a +program specification ‘-foo’ causes the following blocks to be applied +to messages from any program but the one specified. A hostname +specification of the form ‘+hostname’ and the following blocks will be +applied to messages received from the specified hostname. +Alternatively, a hostname specification ‘-hostname’ causes the +following blocks to be applied to messages from any host but the one +specified. If the hostname is given as ‘@’, the local hostname will be +used. (NOT YET IMPLEMENTED) A program or hostname specification may be +reset by giving the program or hostname as ‘*’.</p> +<p>Please note that the "#!prog", "#+hostname" and "#-hostname" +syntax available in BSD syslogd is not supported by rsyslogd. By +default, no hostname or program is set.</p> +<h3>Selectors</h3> +<p><b>Selectors are the traditional way of filtering syslog +messages.</b> They have been kept in rsyslog with their original +syntax, because it is well-known, highly effective and also needed for +compatibility with stock syslogd configuration files. If you just need +to filter based on priority and facility, you should do this with +selector lines. They are <b>not</b> second-class citizens +in rsyslog and offer the best performance for this job.</p> +<p>The selector field itself again consists of two parts, a +facility and a priority, separated by a period (".''). Both parts are +case insensitive and can also be specified as decimal numbers, but +don't do that, you have been warned. Both facilities and priorities are +described in rsyslog(3). The names mentioned below correspond to the +similar LOG_-values in /usr/include/rsyslog.h.<br> +<br> +The facility is one of the following keywords: auth, authpriv, cron, +daemon, kern, lpr, mail, mark, news, security (same as auth), syslog, +user, uucp and local0 through local7. The keyword security should not +be used anymore and mark is only for internal use and therefore should +not be used in applications. Anyway, you may want to specify and +redirect these messages here. The facility specifies the subsystem that +produced the message, i.e. all mail programs log with the mail facility +(LOG_MAIL) if they log using syslog.<br> +<br> +The priority is one of the following keywords, in ascending order: +debug, info, notice, warning, warn (same as warning), err, error (same +as err), crit, alert, emerg, panic (same as emerg). The keywords error, +warn and panic are deprecated and should not be used anymore. The +priority defines the severity of the message.<br> +<br> +The behavior of the original BSD syslogd is that all messages of the +specified priority and higher are logged according to the given action. +Rsyslogd behaves the same, but has some extensions.<br> +<br> +In addition to the above mentioned names the rsyslogd(8) understands +the following extensions: An asterisk ("*'') stands for all facilities +or all priorities, depending on where it is used (before or after the +period). The keyword none stands for no priority of the given facility.<br> +<br> +You can specify multiple facilities with the same priority pattern in +one statement using the comma (",'') operator. You may specify as much +facilities as you want. Remember that only the facility part from such +a statement is taken, a priority part would be skipped.</p> +<p>Multiple selectors may be specified for a single action using +the semicolon (";'') separator. Remember that each selector in the +selector field is capable to overwrite the preceding ones. Using this +behavior you can exclude some priorities from the pattern.</p> +<p>Rsyslogd has a syntax extension to the original BSD source, +that makes its use more intuitively. You may precede every priority +with an equation sign ("='') to specify only this single priority and +not any of the above. You may also (both is valid, too) precede the +priority with an exclamation mark ("!'') to ignore all that +priorities, either exact this one or this and any higher priority. If +you use both extensions than the exclamation mark must occur before the +equation sign, just use it intuitively.</p> +<h3>Property-Based Filters</h3> +<p>Property-based filters are unique to rsyslogd. They allow to +filter on any property, like HOSTNAME, syslogtag and msg. A list of all +currently-supported properties can be found in the <a href="property_replacer.html">property replacer documentation</a> +(but keep in mind that only the properties, not the replacer is +supported). With this filter, each properties can be checked against a +specified value, using a specified compare operation.</p> +<p>A property-based filter must start with a colon in column 0. +This tells rsyslogd that it is the new filter type. The colon must be +followed by the property name, a comma, the name of the compare +operation to carry out, another comma and then the value to compare +against. This value must be quoted. There can be spaces and tabs +between the commas. Property names and compare operations are +case-sensitive, so "msg" works, while "MSG" is an invalid property +name. In brief, the syntax is as follows:</p> +<p><code><b>:property, [!]compare-operation, "value"</b></code></p> +<p>The following <b>compare-operations</b> are +currently supported:</p> +<table id="table1" border="1" width="100%"> +<tbody> +<tr> +<td>contains</td> +<td>Checks if the string provided in value is contained in +the property. There must be an exact match, wildcards are not supported.</td> +</tr> +<tr> +<td>isequal</td> +<td>Compares the "value" string provided and the property +contents. These two values must be exactly equal to match. The +difference to contains is that contains searches for the value anywhere +inside the property value, whereas all characters must be identical for +isequal. As such, isequal is most useful for fields like syslogtag or +FROMHOST, where you probably know the exact contents.</td> +</tr> +<tr> +<td>startswith</td> +<td>Checks if the value is found exactly at the beginning +of the property value. For example, if you search for "val" with +<p><code><b>:msg, startswith, "val"</b></code></p> +<p>it will be a match if msg contains "values are in this +message" but it won't match if the msg contains "There are values in +this message" (in the later case, contains would match). Please note +that "startswith" is by far faster than regular expressions. So even +once they are implemented, it can make very much sense +(performance-wise) to use "startswith".</p> +</td> +</tr> +<tr> +<td>regex</td> +<td>Compares the property against the provided POSIX +BRE regular +expression.</td> +</tr> +<tr> +<td>ereregex</td> +<td>Compares the property against the provided POSIX +ERE regular +expression.</td> +</tr> +</tbody> +</table> +<p>You can use the bang-character (!) immediately in front of a +compare-operation, the outcome of this operation is negated. For +example, if msg contains "This is an informative message", the +following sample would not match:</p> +<p><code><b>:msg, contains, "error"</b></code></p> +<p>but this one matches:</p> +<p><code><b>:msg, !contains, "error"</b></code></p> +<p>Using negation can be useful if you would like to do some +generic processing but exclude some specific events. You can use the +discard action in conjunction with that. A sample would be:</p> +<p><code><b>*.* +/var/log/allmsgs-including-informational.log<br> +:msg, contains, "informational" <font color="#ff0000" size="4">~</font> +<br> +*.* /var/log/allmsgs-but-informational.log</b></code></p> +<p>Do not overlook the red tilde in line 2! In this sample, all +messages are written to the file allmsgs-including-informational.log. +Then, all messages containing the string "informational" are discarded. +That means the config file lines below the "discard line" (number 2 in +our sample) will not be applied to this message. Then, all remaining +lines will also be written to the file allmsgs-but-informational.log.</p> +<p><b>Value</b> is a quoted string. It supports some +escape sequences:</p> +<p>\" - the quote character (e.g. "String with \"Quotes\"")<br> +\\ - the backslash character (e.g. "C:\\tmp")</p> +<p>Escape sequences always start with a backslash. Additional +escape sequences might be added in the future. Backslash characters <b>must</b> +be escaped. Any other sequence then those outlined above is invalid and +may lead to unpredictable results.</p> +<p>Probably, "msg" is the most prominent use case of property +based filters. It is the actual message text. If you would like to +filter based on some message content (e.g. the presence of a specific +code), this can be done easily by:</p> +<p><code><b>:msg, contains, "ID-4711"</b></code></p> +<p>This filter will match when the message contains the string +"ID-4711". Please note that the comparison is case-sensitive, so it +would not match if "id-4711" would be contained in the message.</p> +<p><code><b>:msg, regex, "fatal .* error"</b></code></p> +<p>This filter uses a POSIX regular expression. It matches when +the +string contains the words "fatal" and "error" with anything in between +(e.g. "fatal net error" and "fatal lib error" but not "fatal error" as +two spaces are required by the regular expression!).</p> +<p>Getting property-based filters right can sometimes be +challenging. In order to help you do it with as minimal effort as +possible, rsyslogd spits out debug information for all property-based +filters during their evaluation. To enable this, run rsyslogd in +foreground and specify the "-d" option.</p> +<p>Boolean operations inside property based filters (like +'message contains "ID17" or message contains "ID18"') are currently not +supported (except for "not" as outlined above). Please note that while +it is possible to query facility and severity via property-based +filters, it is far more advisable to use classic selectors (see above) +for those cases.</p> +<h3>Expression-Based Filters</h3> +Expression based filters allow +filtering on arbitrary complex expressions, which can include boolean, +arithmetic and string operations. Expression filters will evolve into a +full configuration scripting language. Unfortunately, their syntax will +slightly change during that process. So if you use them now, you need +to be prepared to change your configuration files some time later. +However, we try to implement the scripting facility as soon as possible +(also in respect to stage work needed). So the window of exposure is +probably not too long.<br> +<br> +Expression based filters are indicated by the keyword "if" in column 1 +of a new line. They have this format:<br> +<br> +if expr then action-part-of-selector-line<br> +<br> +"If" and "then" are fixed keywords that mus be present. "expr" is a +(potentially quite complex) expression. So the <a href="expression.html">expression documentation</a> for +details. "action-part-of-selector-line" is an action, just as you know +it (e.g. "/var/log/logfile" to write to that file).<br> +<br> +A few quick samples:<br> +<br> +<code> +*.* /var/log/file1 # the traditional way<br> +if $msg contains 'error' /var/log/errlog # the expression-based way<br> +</code> +<br> +Right now, you need to specify numerical values if you would like to +check for facilities and severity. These can be found in <a href="http://www.ietf.org/rfc/rfc3164.txt">RFC 3164</a>. +If you don't like that, you can of course also use the textual property +- just be sure to use the right one. As expression support is enhanced, +this will change. For example, if you would like to filter on message +that have facility local0, start with "DEVNAME" and have either +"error1" or "error0" in their message content, you could use the +following filter:<br> +<br> +<code> +if $syslogfacility-text == 'local0' and $msg +startswith 'DEVNAME' and ($msg contains 'error1' or $msg contains +'error0') then /var/log/somelog<br> +</code> +<br> +Please note that the above <span style="font-weight: bold;">must +all be on one line</span>! And if you would like to store all +messages except those that contain "error1" or "error0", you just need +to add a "not":<br> +<br> +<code> +if $syslogfacility-text == 'local0' and $msg +startswith 'DEVNAME' and <span style="font-weight: bold;">not</span> +($msg contains 'error1' or $msg contains +'error0') then /var/log/somelog<br> +</code> +<br> +If you would like to do case-insensitive comparisons, use +"contains_i" instead of "contains" and "startswith_i" instead of +"startswith".<br> +<br> +Note that regular expressions are currently NOT +supported in expression-based filters. These will be added later when +function support is added to the expression engine (the reason is that +regular expressions will be a separate loadable module, which requires +some more prequisites before it can be implemented).<br> + +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> +</body> +</html> + diff --git a/doc/rsyslog_conf_global.html b/doc/rsyslog_conf_global.html new file mode 100644 index 00000000..7dda046f --- /dev/null +++ b/doc/rsyslog_conf_global.html @@ -0,0 +1,251 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head><title>Configuration Directives - rsyslog.conf</title></head> +<body> +<p>This is a part of the rsyslog.conf documentation.</p> +<a href="rsyslog_conf.html">back</a> +<h2>Configuration Directives</h2> +<p>All configuration directives need to be specified on a line by their +own and must start with a dollar-sign. Note that those starting with +the word "Action" modify the next action and should be specified +in front of it. +<p>Here is a list in alphabetical order. Follow links for a description.</p> +<p>Not all directives have an in-depth description right now. +Default values for them are in bold. A more in-depth description will +appear as implementation progresses. +</p> +<p><b>Be sure to read information about <a href="queues.html">queues in rsyslog</a></b> - +many parameter settings modify queue parameters. If in doubt, use the +default, it is usually well-chosen and applicable in most cases.</p> +<ul> +<li><a href="rsconf1_actionexeconlywhenpreviousissuspended.html">$ActionExecOnlyWhenPreviousIsSuspended</a></li> +<li>$ActionName <a_single_word> - used primarily for documentation, e.g. when +generating a configuration graph. Available sice 4.3.1. +<li>$ActionExecOnlyOnceEveryInterval <seconds> - +execute action only if the last execute is at last +<seconds> seconds in the past (more info in <a href="ommail.html">ommail</a>, +but may be used with any action)</li> +<li><i><b>$ActionExecOnlyEveryNthTime</b> <number></i> - If configured, the next action will +only be executed every n-th time. For example, if configured to 3, the first two messages +that go into the action will be dropped, the 3rd will actually cause the action to execute, +the 4th and 5th will be dropped, the 6th executed under the action, ... and so on. Note: +this setting is automatically re-set when the actual action is defined.</li> +<li><i><b>$ActionExecOnlyEveryNthTimeTimeout</b> <number-of-seconds></i> - has a meaning only if +$ActionExecOnlyEveryNthTime is also configured for the same action. If so, the timeout +setting specifies after which period the counting of "previous actions" expires and +a new action count is begun. Specify 0 (the default) to disable timeouts. +<br> +<i>Why is this option needed?</i> Consider this case: a message comes in at, eg., 10am. That's +count 1. Then, nothing happens for the next 10 hours. At 8pm, the next +one occurs. That's count 2. Another 5 hours later, the next message +occurs, bringing the total count to 3. Thus, this message now triggers +the rule. +<br> +The question is if this is desired behavior? Or should the rule only be +triggered if the messages occur within an e.g. 20 minute window? If the +later is the case, you need a +<br> +$ActionExecOnlyEveryNthTimeTimeout 1200 +<br> +This directive will timeout previous messages seen if they are older +than 20 minutes. In the example above, the count would now be always 1 +and consequently no rule would ever be triggered. + +<li>$ActionFileDefaultTemplate [templateName] - sets a new default template for file actions</li> +<li>$ActionFileEnableSync [on/<span style="font-weight: bold;">off</span>] - enables file +syncing capability of omfile</li> +<li>$ActionForwardDefaultTemplate [templateName] - sets a new +default template for UDP and plain TCP forwarding action</li> +<li>$ActionGSSForwardDefaultTemplate [templateName] - sets a +new default template for GSS-API forwarding action</li> +<li>$ActionQueueCheckpointInterval <number></li> +<li>$ActionQueueDequeueSlowdown <number> [number +is timeout in <i> micro</i>seconds (1000000us is 1sec!), +default 0 (no delay). Simple rate-limiting!]</li> +<li>$ActionQueueDiscardMark <number> [default +9750]</li> +<li>$ActionQueueDiscardSeverity <number> +[*numerical* severity! default 4 (warning)]</li> +<li>$ActionQueueFileName <name></li> +<li>$ActionQueueHighWaterMark <number> [default +8000]</li> +<li>$ActionQueueImmediateShutdown [on/<b>off</b>]</li> +<li>$ActionQueueSize <number></li> +<li>$ActionQueueLowWaterMark <number> [default +2000]</li> +<li>$ActionQueueMaxFileSize <size_nbr>, default 1m</li> +<li>$ActionQueueTimeoutActionCompletion <number> +[number is timeout in ms (1000ms is 1sec!), default 1000, 0 means +immediate!]</li> +<li>$ActionQueueTimeoutEnqueue <number> [number +is timeout in ms (1000ms is 1sec!), default 2000, 0 means indefinite]</li> +<li>$ActionQueueTimeoutShutdown <number> [number +is timeout in ms (1000ms is 1sec!), default 0 (indefinite)]</li> +<li>$ActionQueueWorkerTimeoutThreadShutdown +<number> [number is timeout in ms (1000ms is 1sec!), +default 60000 (1 minute)]</li> +<li>$ActionQueueType [FixedArray/LinkedList/<b>Direct</b>/Disk]</li> +<li>$ActionQueueSaveOnShutdown [on/<b>off</b>] +</li> +<li>$ActionQueueWorkerThreads <number>, num worker threads, default 1, recommended 1</li> +<li>$ActionQueueWorkerThreadMinumumMessages <number>, default 100</li> +<li><a href="rsconf1_actionresumeinterval.html">$ActionResumeInterval</a></li> +<li>$ActionResumeRetryCount <number> [default 0, -1 means eternal]</li> +<li>$ActionSendResendLastMsgOnReconn <[on/<b>off</b>]> specifies if the last message is to be resend when a connecition broken and has been reconnedcted. May increase reliability, but comes at the risk of message duplication. +<li>$ActionSendStreamDriver <driver basename> just like $DefaultNetstreamDriver, but for the specific action</li> +<li>$ActionSendStreamDriverMode <mode>, default 0, mode to use with the stream driver (driver-specific)</li> +<li>$ActionSendStreamDriverAuthMode <mode>, authentication mode to use with the stream driver. Note that this directive requires TLS +netstream drivers. For all others, it will be ignored. +(driver-specific)</li> +<li>$ActionSendStreamDriverPermittedPeer <ID>, accepted fingerprint (SHA1) or name of remote peer. Note that this directive requires TLS +netstream drivers. For all others, it will be ignored. +(driver-specific) -<span style="font-weight: bold;"> directive may go away</span>!</li> +<li><b>$ActionSendUDPRebindInterval</b> nbr</a>- [available since 4.3.2] - instructs the UDP send +action to rebind the send socket every nbr of messages sent. Zero, the default, means +that no rebind is done. This directive is useful for use with load-balancers.</li> +<li><a href="rsconf1_allowedsender.html">$AllowedSender</a></li> +<li><a href="rsconf1_controlcharacterescapeprefix.html">$ControlCharacterEscapePrefix</a></li> +<li><a href="rsconf1_debugprintcfsyslinehandlerlist.html">$DebugPrintCFSyslineHandlerList</a></li> + +<li><a href="rsconf1_debugprintmodulelist.html">$DebugPrintModuleList</a></li> +<li><a href="rsconf1_debugprinttemplatelist.html">$DebugPrintTemplateList</a></li> +<li>$DefaultNetstreamDriver <drivername>, the default <a href="netstream.html">network stream driver</a> to use. Defaults to ptcp.$DefaultNetstreamDriverCAFile </path/to/cafile.pem></li> +<li>$DefaultNetstreamDriverCertFile </path/to/certfile.pem></li> +<li>$DefaultNetstreamDriverKeyFile </path/to/keyfile.pem></li> +<li><b>$CreateDirs</b> [<b>on</b>/off] - create directories on an as-needed basis</li> +<li><a href="rsconf1_dircreatemode.html">$DirCreateMode</a></li> +<li><a href="rsconf1_dirgroup.html">$DirGroup</a></li> +<li><a href="rsconf1_dirowner.html">$DirOwner</a></li> +<li><a href="rsconf1_dropmsgswithmaliciousdnsptrrecords.html">$DropMsgsWithMaliciousDnsPTRRecords</a></li> +<li><a href="rsconf1_droptrailinglfonreception.html">$DropTrailingLFOnReception</a></li> +<li><a href="rsconf1_dynafilecachesize.html">$DynaFileCacheSize</a></li> +<li><a href="rsconf1_escapecontrolcharactersonreceive.html">$EscapeControlCharactersOnReceive</a></li> +<li>$ErrorMessagesToStderr [<b>on</b>|off] - direct rsyslogd error message to stderr (in addition to other targets)</li> +<li><a href="rsconf1_failonchownfailure.html">$FailOnChownFailure</a></li> +<li><a href="rsconf1_filecreatemode.html">$FileCreateMode</a></li> +<li><a href="rsconf1_filegroup.html">$FileGroup</a></li> +<li><a href="rsconf1_fileowner.html">$FileOwner</a></li> +<li><a href="rsconf1_generateconfiggraph.html">$GenerateConfigGraph</a></li> +<li><a href="rsconf1_gssforwardservicename.html">$GssForwardServiceName</a></li> +<li><a href="rsconf1_gsslistenservicename.html">$GssListenServiceName</a></li> +<li><a href="rsconf1_gssmode.html">$GssMode</a></li> +<li>$HUPisRestart [<b>on</b>/off] - if set to on, a HUP is a full daemon restart. This means any queued messages are discarded (depending +on queue configuration, of course) all modules are unloaded and reloaded. This mode keeps compatible with sysklogd, but is +not recommended for use with rsyslog. To do a full restart, simply stop and start the daemon. The default is "on" for +compatibility reasons. If it is set to "off", a HUP will only close open files. This is a much quicker action and usually +the only one that is needed e.g. for log rotation. <b>It is recommended to set the setting to "off".</b></li> +<li><a href="rsconf1_includeconfig.html">$IncludeConfig</a></li><li>MainMsgQueueCheckpointInterval <number></li> +<li>$MainMsgQueueDequeueSlowdown <number> [number +is timeout in <i> micro</i>seconds (1000000us is 1sec!), +default 0 (no delay). Simple rate-limiting!]</li> +<li>$MainMsgQueueDiscardMark <number> [default 9750]</li> +<li>$MainMsgQueueDiscardSeverity <severity> +[either a textual or numerical severity! default 4 (warning)]</li> +<li>$MainMsgQueueFileName <name></li> +<li>$MainMsgQueueHighWaterMark <number> [default +8000]</li> +<li>$MainMsgQueueImmediateShutdown [on/<b>off</b>]</li> +<li><a href="rsconf1_mainmsgqueuesize.html">$MainMsgQueueSize</a></li> +<li>$MainMsgQueueLowWaterMark <number> [default +2000]</li> +<li>$MainMsgQueueMaxFileSize <size_nbr>, default +1m</li> +<li>$MainMsgQueueTimeoutActionCompletion +<number> [number is timeout in ms (1000ms is 1sec!), +default +1000, 0 means immediate!]</li> +<li>$MainMsgQueueTimeoutEnqueue <number> [number +is timeout in ms (1000ms is 1sec!), default 2000, 0 means indefinite]</li> +<li>$MainMsgQueueTimeoutShutdown <number> [number +is timeout in ms (1000ms is 1sec!), default 0 (indefinite)]</li> +<li>$MainMsgQueueWorkerTimeoutThreadShutdown +<number> [number is timeout in ms (1000ms is 1sec!), +default 60000 (1 minute)]</li> +<li>$MainMsgQueueType [<b>FixedArray</b>/LinkedList/Direct/Disk]</li> +<li>$MainMsgQueueSaveOnShutdown [on/<b>off</b>] +</li> +<li>$MainMsgQueueWorkerThreads <number>, num +worker threads, default 1, recommended 1</li> +<li>$MainMsgQueueWorkerThreadMinumumMessages <number>, default 100</li> +<li><a href="rsconf1_markmessageperiod.html">$MarkMessagePeriod</a> (immark)</li> +<li><b><i>$MaxMessageSize</i></b> <size_nbr>, default 2k - allows to specify maximum supported message size +(both for sending and receiving). The default +should be sufficient for almost all cases. Do not set this below 1k, as it would cause +interoperability problems with other syslog implementations.<br> +Change the setting to e.g. 32768 if you would like to +support large message sizes for IHE (32k is the current maximum +needed for IHE). I was initially tempted to set the default to 32k, +but there is a some memory footprint with the current +implementation in rsyslog. +<br>If you intend to receive Windows Event Log data (e.g. via +<a href="http://www.eventreporter.com/">EventReporter</a>), you might want to +increase this number to an even higher value, as event +log messages can be very lengthy ("$MaxMessageSize 64k" is not a bad idea). +Note: testing showed that 4k seems to be +the typical maximum for <b>UDP</b> based syslog. This is an IP stack +restriction. Not always ... but very often. If you go beyond +that value, be sure to test that rsyslogd actually does what +you think it should do ;) It is highly suggested to use a TCP based transport +instead of UDP (plain TCP syslog, RELP). This resolves the UDP stack size restrictions. +<br>Note that 2k, the current default, is the smallest size that must be +supported in order to be compliant to the upcoming new syslog RFC series. +</li> +<li><a href="rsconf1_maxopenfiles.html">$MaxOpenFiles</a></li> +<li><a href="rsconf1_moddir.html">$ModDir</a></li> +<li><a href="rsconf1_modload.html">$ModLoad</a></li> +<li><b>$RepeatedMsgContainsOriginalMsg</b> [on/<b>off</b>] - "last message repeated n times" messages, if generated, +have a different format that contains the message that is being repeated. +Note that only the first "n" characters are included, with n to be at least 80 characters, most +probably more (this may change from version to version, thus no specific limit is given). The bottom +line is that n is large enough to get a good idea which message was repeated but it is not necessarily +large enough for the whole message. (Introduced with 4.1.5). Once set, it affects all following actions.</li> +<li><a href="rsconf1_repeatedmsgreduction.html">$RepeatedMsgReduction</a></li> +<li><a href="rsconf1_resetconfigvariables.html">$ResetConfigVariables</a></li> +<li><b>$OptimizeForUniprocessor</b> [on/<b>off</b>] - turns on optimizatons which lead to better +performance on uniprocessors. If you run on multicore-machiens, turning this off lessens CPU load. The +default may change as uniprocessor systems become less common. [available since 4.1.0]</li> +<li>$PreserveFQDN [on/<b>off</b>) - if set to off (legacy default to remain compatible +to sysklogd), the domain part from a name that is within the same domain as the receiving +system is stripped. If set to on, full names are always used.</li> +<li>$WorkDirectory <name> (directory for spool and other work files)</li> +<li>$UDPServerAddress <IP> (imudp) -- local IP +address (or name) the UDP listens should bind to</li> +<li>$UDPServerRun <port> (imudp) -- former +-r<port> option, default 514, start UDP server on this +port, "*" means all addresses</li> +<li>$UDPServerTimeRequery <nbr-of-times> (imudp) -- this is a performance +optimization. Getting the system time is very costly. With this setting, imudp can +be instructed to obtain the precise time only once every n-times. This logic is +only activated if messages come in at a very fast rate, so doing less frequent +time calls should usually be acceptable. The default value is two, because we have +seen that even without optimization the kernel often returns twice the identical time. +You can set this value as high as you like, but do so at your own risk. The higher +the value, the less precise the timestamp. +<li><a href="droppriv.html">$PrivDropToGroup</a></li> +<li><a href="droppriv.html">$PrivDropToGroupID</a></li> +<li><a href="droppriv.html">$PrivDropToUser</a></li> +<li><a href="droppriv.html">$PrivDropToUserID</a></li> +<li><a href="rsconf1_umask.html">$UMASK</a></li> +</ul> +<p><b>Where <size_nbr> is specified above,</b> +modifiers can be used after the number part. For example, 1k means +1024. Supported are k(ilo), m(ega), g(iga), t(era), p(eta) and e(xa). +Lower case letters refer to the traditional binary defintion (e.g. 1m +equals 1,048,576) whereas upper case letters refer to their new +1000-based definition (e.g 1M equals 1,000,000).</p> +<p>Numbers may include '.' and ',' for readability. So you can +for example specify either "1000" or "1,000" with the same result. +Please note that rsyslogd simply ignores the punctuation. Form it's +point of view, "1,,0.0.,.,0" also has the value 1000. </p> + +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008, 2009 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 3 or higher.</font></p> +</body> +</html> + + diff --git a/doc/rsyslog_conf_modules.html b/doc/rsyslog_conf_modules.html new file mode 100644 index 00000000..df9abeea --- /dev/null +++ b/doc/rsyslog_conf_modules.html @@ -0,0 +1,53 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head><title>Modules - rsyslog.conf</title></head> +<body> +<p>This is a part of the rsyslog.conf documentation.</p> +<a href="rsyslog_conf.html">back</a> +<h2>Modules</h2> +<p>Rsyslog has a modular design. Consequently, there is a growing +number of modules. Here is the entry point to their documentation and +what they do (list is currently not complete)</p> +<ul> +<li><a href="omsnmp.html">omsnmp</a> - SNMP trap output module</li> +<li><a href="omstdout.html">omtdout</a> - stdout output module (mainly a test tool)</li> +<li><a href="omrelp.html">omrelp</a> - RELP output module</li> +<li>omgssapi - output module for GSS-enabled syslog</li> +<li><a href="ommysql.html">ommysql</a> - output module for MySQL</li> +<li>ompgsql - output module for PostgreSQL</li> +<li><a href="omlibdbi.html">omlibdbi</a> - +generic database output module (Firebird/Interbase, MS SQL, Sybase, +SQLLite, Ingres, Oracle, mSQL)</li> +<li><a href="ommail.html">ommail</a> - +permits rsyslog to alert folks by mail if something important happens</li> +<li><a href="omoracle.html">omoracle</a> - output module for Oracle (native OCI interface)</li> +<li><a href="imfile.html">imfile</a> +- input module for text files</li> +<li><a href="imrelp.html">imrelp</a> - RELP +input module</li> +<li>imudp - udp syslog message input</li> +<li><a href="imtcp.html">imtcp</a> - input +plugin for plain tcp syslog</li> +<li><a href="imgssapi.html">imgssapi</a> - +input plugin for plain tcp and GSS-enabled syslog</li> +<li>immark - support for mark messages</li> +<li><a href="imklog.html">imklog</a> - kernel logging</li> +<li><a href="imuxsock.html">imuxsock</a> - +unix sockets, including the system log socket</li> +<li><a href="im3195.html">im3195</a> - +accepts syslog messages via RFC 3195</li> +</ul> +<p>Please note that each module provides configuration +directives, which are NOT necessarily being listed below. Also +remember, that a modules configuration directive (and functionality) is +only available if it has been loaded (using $ModLoad).</p> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008, 2009 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 3 or higher.</font></p> +</body> +</html> + diff --git a/doc/rsyslog_conf_nomatch.html b/doc/rsyslog_conf_nomatch.html new file mode 100644 index 00000000..5f25f3e4 --- /dev/null +++ b/doc/rsyslog_conf_nomatch.html @@ -0,0 +1,48 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head><title>nomatch mode - property replacer - rsyslog.conf</title></head> +<body> +<h1>nomatch mode - property replacer - rsyslog.con</h1> +<p>This is a part of the <a href="rsyslog_conf.html">rsyslog.conf documentation</a> +of the <a href="property_replacer.html">property replacer</a>.</p> +<p><b>The "nomatch-Mode" specifies which string the property replacer +shall return if a regular expression did not find the search string.</b>. Traditionally, +the string "**NO MATCH**" was returned, but many people complained this was almost never useful. +Still, this mode is support as "<b>DFLT</b>" for legacy configurations. +<p>Three additional and potentially useful modes exist: in one (<b>BLANK</b>) a blank string +is returned. This is probably useful for inserting values into databases where no +value shall be inserted if the expression could not be found. +<p>A similar mode is "<b>ZERO</b>" where the string "0" is returned. This is suitable +for numerical values. A use case may be +that you record a traffic log based on firewall rules and the "bytes transmitted" counter +is extracted via a regular expression. If no "bytes transmitted" counter is available +in the current message, it is probably a good idea to return an empty string, which the +database layer can turn into a zero. +<p>The other mode is "<b>FIELD</b>", in which the complete field is returned. This may be useful +in cases where absense of a match is considered a failure and the message that triggered +it shall be logged. +<p>If in doubt, <b>it is highly suggested to use the +<a href="http://www.rsyslog.com/tool-regex">rsyslog online regular expression +checker and generator</a> to see these options in action</b>. With that online tool, +you can craft regular expressions based on samples and try out the different modes. + +<h2>Summary of nomatch Modes</h2> +<table border="1" cellspacing="0"> +<tr><td><b>Mode</b></td><td><b>Returned</b></td></tr> +<tr><td>DFLT</td><td>"**NO MATCH**"</td></tr> +<tr><td>BLANK</td><td>"" (empty string)</td></tr> +<tr><td>ZERO</td><td>"0"</td></tr> +<tr><td>FIELD</td><td>full content of original field</td></tr> +<tr><td> </td><td><a href="http://www.rsyslog.com/tool-regex">Interactive Tool</a></td></tr> +</table> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> +</body> +</html> + + diff --git a/doc/rsyslog_conf_output.html b/doc/rsyslog_conf_output.html new file mode 100644 index 00000000..c52aaa5e --- /dev/null +++ b/doc/rsyslog_conf_output.html @@ -0,0 +1,81 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head><title>Output Channels - rsyslog.conf</title></head> +<body> +<p>This is a part of the rsyslog.conf documentation.</p> +<a href="rsyslog_conf.html">back</a> +<h2>Output Channels</h2> +<p>Output Channels are a new concept first introduced in rsyslog +0.9.0. <b>As of this writing, it is most likely that they will +be replaced by something different in the future.</b> So if you +use them, be prepared to change you configuration file syntax when you +upgrade to a later release.<br> +<br> +The idea behind output channel definitions is that it shall provide an +umbrella for any type of output that the user might want. In essence,<br> +this is the "file" part of selector lines (and this is why we are not +sure output channel syntax will stay after the next review). There is a<br> +difference, though: selector channels both have filter conditions +(currently facility and severity) as well as the output destination. +they can only be used to write to files - not pipes, ttys or whatever +Output channels define the output definition, only. As of this build, +else. If we stick with output channels, this will change over time.</p> +<p>In concept, an output channel includes everything needed to +know about an output actions. In practice, the current implementation +only carries<br> +a filename, a maximum file size and a command to be issued when this +file size is reached. More things might be present in future version, +which might also change the syntax of the directive.</p> +<p>Output channels are defined via an $outchannel directive. It's +syntax is as follows:<br> +<br> +$outchannel name,file-name,max-size,action-on-max-size<br> +<br> +name is the name of the output channel (not the file), file-name is the +file name to be written to, max-size the maximum allowed size and +action-on-max-size a command to be issued when the max size is reached. +This command always has exactly one parameter. The binary is that part +of action-on-max-size before the first space, its parameter is +everything behind that space.<br> +<br> +Please note that max-size is queried BEFORE writing the log message to +the file. So be sure to set this limit reasonably low so that any +message might fit. For the current release, setting it 1k lower than +you expected is helpful. The max-size must always be specified in bytes +- there are no special symbols (like 1k, 1m,...) at this point of +development.<br> +<br> +Keep in mind that $outchannel just defines a channel with "name". It +does not activate it. To do so, you must use a selector line (see +below). That selector line includes the channel name plus an $ sign in +front of it. A sample might be:<br> +<br> +*.* $mychannel<br> +<br> +In its current form, output channels primarily provide the ability to +size-limit an output file. To do so, specify a maximum size. When this +size is reached, rsyslogd will execute the action-on-max-size command +and then reopen the file and retry. The command should be something +like a <a href="log_rotation_fix_size.html">log rotation +script</a> or a similar thing.</p> +<p>If there is no action-on-max-size command or the command did +not resolve the situation, the file is closed and never reopened by +rsyslogd (except, of course, by huping it). This logic was integrated +when we first experienced severe issues with files larger 2gb, which +could lead to rsyslogd dumping core. In such cases, it is more +appropriate to stop writing to a single file. Meanwhile, rsyslogd has +been fixed to support files larger 2gb, but obviously only on file +systems and operating system versions that do so. So it can still make +sense to enforce a 2gb file size limit.</p> + +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> +</body> +</html> + + diff --git a/doc/rsyslog_conf_templates.html b/doc/rsyslog_conf_templates.html new file mode 100644 index 00000000..6c68b801 --- /dev/null +++ b/doc/rsyslog_conf_templates.html @@ -0,0 +1,151 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head><title>Templates - rsyslog.conf</title></head> +<body> +<p>This is a part of the rsyslog.conf - documentation.</p> +<a href="rsyslog_conf.html">back</a> +<h2>Templates</h2> +<p>Templates are a key feature of rsyslog. They allow to specify +any +format a user might want. They are also used for dynamic file name +generation. Every output in rsyslog uses templates - this holds true +for files, user messages and so on. The database writer expects its +template to be a proper SQL statement - so this is highly customizable +too. You might ask how does all of this work when no templates at all +are specified. Good question ;) The answer is simple, though. Templates +compatible with the stock syslogd formats are hardcoded into rsyslogd. +So if no template is specified, we use one of these hardcoded +templates. Search for "template_" in syslogd.c and you will find the +hardcoded ones.</p> +<p>A template consists of a template directive, a name, the +actual template text and optional options. A sample is:</p> +<blockquote><code>$template MyTemplateName,"\7Text +%property% some more text\n",<options></code></blockquote> +<p>The "$template" is the template directive. It tells rsyslog +that this line contains a template. "MyTemplateName" is the template +name. All +other config lines refer to this name. The text within quotes is the +actual template text. The backslash is an escape character, much as it +is in C. It does all these "cool" things. For example, \7 rings the +bell (this is an ASCII value), \n is a new line. C programmers and perl +coders have the advantage of knowing this, but the set in rsyslog is a +bit restricted currently. +</p> +<p>All text in the template is used literally, except for things +within percent signs. These are properties and allow you access to the +contents of the syslog message. Properties are accessed via the +<a href="property_replacer.html">property replacer</a> +(nice name, huh) and it can do cool things, too. For +example, it can pick a substring or do date-specific formatting. More +on this is below, on some lines of the property replacer.<br> +<br> +The <options> part is optional. It carries options +influencing the template as whole. See details below. Be sure NOT to +mistake template options with property options - the later ones are +processed by the property replacer and apply to a SINGLE property, only +(and not the whole template).<br> +<br> +Template options are case-insensitive. Currently defined are: </p> +<p><b>sql</b> - format the string suitable for a SQL +statement in MySQL format. This will replace single quotes ("'") and +the backslash character by their backslash-escaped counterpart ("\'" +and "\\") inside each field. Please note that in MySQL configuration, +the <code class="literal">NO_BACKSLASH_ESCAPES</code> +mode must be turned off for this format to work (this is the default).</p> +<p><b>stdsql</b> - format the string suitable for a +SQL statement that is to be sent to a standards-compliant sql server. +This will replace single quotes ("'") by two single quotes ("''") +inside each field. You must use stdsql together with MySQL if in MySQL +configuration the +<code class="literal">NO_BACKSLASH_ESCAPES</code> is +turned on.</p> +<p>Either the <b>sql</b> or <b>stdsql</b> +option <b>must</b> be specified when a template is used +for writing to a database, otherwise injection might occur. Please note +that due to the unfortunate fact that several vendors have violated the +sql standard and introduced their own escape methods, it is impossible +to have a single option doing all the work. So you yourself +must make sure you are using the right format. <b>If you choose +the wrong one, you are still vulnerable to sql injection.</b><br> +<br> +Please note that the database writer *checks* that the sql option is +present in the template. If it is not present, the write database +action is disabled. This is to guard you against accidental forgetting +it and then becoming vulnerable to SQL injection. The sql option can +also be useful with files - especially if you want to import them into +a database on another machine for performance reasons. However, do NOT +use it if you do not have a real need for it - among others, it takes +some toll on the processing time. Not much, but on a really busy system +you might notice it ;)</p> +<p>The default template for the write to database action has the +sql option set. As we currently support only MySQL and the sql option +matches the default MySQL configuration, this is a good choice. +However, if you have turned on +<code class="literal">NO_BACKSLASH_ESCAPES</code> in +your MySQL config, you need to supply a template with the stdsql +option. Otherwise you will become vulnerable to SQL injection. <br> +<br> +To escape:<br> +% = \%<br> +\ = \\ --> '\' is used to escape (as in C)<br> +$template TraditionalFormat,%timegenerated% %HOSTNAME% +%syslogtag%%msg%\n"<br> +<br> +Properties can be accessed by the <a href="property_replacer.html">property +replacer</a> (see there for details).</p> +<p><b>Please note that templates can also by +used to generate selector lines with dynamic file names.</b> For +example, if you would like to split syslog messages from different +hosts to different files (one per host), you can define the following +template:</p> +<blockquote><code>$template +DynFile,"/var/log/system-%HOSTNAME%.log"</code></blockquote> +<p>This template can then be used when defining an output +selector line. It will result in something like +"/var/log/system-localhost.log"</p> +<p>Template +names beginning with "RSYSLOG_" are reserved for rsyslog use. Do NOT +use them if, otherwise you may receive a conflict in the future (and +quite unpredictable behaviour). There is a small set of pre-defined +templates that you can use without the need to define it:</p> +<ul> +<li><span style="font-weight: bold;">RSYSLOG_TraditionalFileFormat</span> +- the "old style" default log file format with low-precision timestamps</li> +<li><span style="font-weight: bold;">RSYSLOG_FileFormat</span> +- a modern-style logfile format similar to TraditionalFileFormat, buth +with high-precision timestamps and timezone information</li> +<li><span style="font-weight: bold;">RSYSLOG_TraditionalForwardFormat</span> +- the traditional forwarding format with low-precision timestamps. Most +useful if you send messages to other syslogd's or rsyslogd +below +version 3.12.5.</li> +<li><span style="font-weight: bold;">RSYSLOG_ForwardFormat</span> +- a new high-precision forwarding format very similar to the +traditional one, but with high-precision timestamps and timezone +information. Recommended to be used when sending messages to rsyslog +3.12.5 or above.</li> +<li><span style="font-weight: bold;">RSYSLOG_SyslogProtocol23Format</span> +- the format specified in IETF's internet-draft +ietf-syslog-protocol-23, which is assumed to be come the new syslog +standard RFC. This format includes several improvements. The rsyslog +message parser understands this format, so you can use it together with +all relatively recent versions of rsyslog. Other syslogd's may get +hopelessly confused if receiving that format, so check before you use +it. Note that the format is unlikely to change when the final RFC comes +out, but this may happen.</li> +<li><span style="font-weight: bold;">RSYSLOG_DebugFormat</span> +- a special format used for troubleshooting property problems. This format +is meant to be written to a log file. Do <b>not</b> use for production or remote +forwarding.</li> +</ul> + +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> +</body> +</html> + diff --git a/doc/rsyslog_confgraph_complex.conf b/doc/rsyslog_confgraph_complex.conf new file mode 100644 index 00000000..3d7ec0a3 --- /dev/null +++ b/doc/rsyslog_confgraph_complex.conf @@ -0,0 +1,108 @@ +$DebugPrintTemplateList off +$DebugPrintCfSysLineHandlerList off +$DebugPrintModuleList off +#$ResetConfigVariables +$ErrorMessagesToStderr off +$ModLoad /home/rger/proj/rsyslog/plugins/imuxsock/.libs/imuxsock.so +#$ModLoad /home/rger/proj/rsyslog/plugins/imklog/.libs/imklog +#$ModLoad /home/rger/proj/rsyslog/plugins/imtcp/.libs/imtcp +$ModLoad /home/rger/proj/rsyslog/plugins/imtcp/.libs/imtcp +$ModLoad /home/rger/proj/rsyslog/plugins/imudp/.libs/imudp +$ModLoad /home/rger/proj/rsyslog/plugins/omstdout/.libs/omstdout +$ModLoad /home/rger/proj/rsyslog/plugins/omprog/.libs/omprog +$ModLoad /home/rger/proj/rsyslog/plugins/omtesting/.libs/omtesting +#$ModLoad /home/rger/proj/rsyslog/plugins/ommail/.libs/ommail +# +# +# PGSQL testing +$ModLoad /home/rger/proj/rsyslog/plugins/ompgsql/.libs/ompgsql.so +$template pgfmt,"insert into SystemEvents (Message, Facility, FromHost, Priority, DeviceReportedTime, ReceivedAt, InfoUnitID, SysLogTag) values ('%msg%', %syslogfacility%, '%HOSTNAME%', %syslogpriority%, '%timereported:::date-pgsql%', '%timegenerated:::date-pgsql%', %iut%, '%syslogtag%');",STDSQL +#$ActionQueueType linkedlist +#*.* :ompgsql:127.0.0.1,rsyslog,postgres,;pgfmt + +#$ActionOMStdoutArrayInterface on +#*.* :omstdout: + +$ActionResumeInterval 4 +$ActionResumeRetryCount 3 +$ActionQueueType LinkedList # run asynchronously +$ActionName Forward to 172.19.3.9 +*.* @@172.19.3.9:10514 +#*.* :omtesting:randfail +#*.* :omtesting:always_suspend +#*.* :omtesting:fail 2 2 + +#$UDPServerTimeRequery 10 +$UDPServerRun 514 +$inputtcpmaxsessions 2000 +$InputTCPServerRun 12514 + +#$PrivDropToUser rger +#$InputTCPServerInputName tcp/514 +#$InputTCPServerAddtlFrameDelimiter 10 +#$InputTCPServerRun 514 +#$AllowedSender UDP,127.0.0.1/32 +#$AllowedSender TCP,127.0.0.1/32 + +$PreserveFQDN off + +#$HUPisRestart on + +#$MainMsgQueueType direct +$MainMsgQueueType linkedlist +$MainMsgQueueDequeueBatchSize 200 +#$MainMsgQueueWorkerTimeoutThreadShutdown -1 + +#---- test DA mode +# set spool locations and switch queue to disk assisted mode +$WorkDirectory spool +$MainMsgQueueSize 200 # this *should* trigger moving on to DA mode... +# note: we must set QueueSize sufficiently high, so that 70% (light delay mark) +# is high enough above HighWatermark! +$MainMsgQueueHighWatermark 80 +$MainMsgQueueLowWatermark 40 +$MainMsgQueueFilename mainq +$MainMsgQueueType linkedlist +# ucomment, as we now have an issue (finally the test case works ;)) +#$MainMsgQueueDequeueBatchSize 80 +#---- end test DA mode + +#$template test,"%timereported:::date-rfc3339%,%timereported:::date-mysql%,%timereported:::date-subseconds%, %timegenerated:::date-mysql%, %timegenerated:::date-subseconds%, msg: %msg%\n" +#$template db,"re: '%msg:R,ERE,1,FIELD:dsn=([0-9]+\.[0-9]+\.[0-9])--end%', msg: '%msg%'\n" +#$template db,"re: '%msg:R,ERE,1,ZERO:dsn=([0-9]+\.[0-9]+\.[0-9])--end%', msg: '%msg%'\n" +#$template DEBUG,"Debug line with all properties:\nFROMHOST: '%FROMHOST%', fromhost-ip: '%fromhost-ip%, HOSTNAME: '%HOSTNAME%', PRI: %PRI%,\nsyslogtag '%syslogtag%', programname: '%programname%', APP-NAME: '%APP-NAME%', PROCID: '%PROCID%', MSGID: '%MSGID%',\nTIMESTAMP: '%TIMESTAMP%', STRUCTURED-DATA: '%STRUCTURED-DATA%',\nmsg: '%msg%'\nescaped msg: '%msg:::drop-cc%'\nrawmsg: '%rawmsg%'\n\n" +$template csv,"%syslogtag:::csv%,%msg:::upppercase,csv%,%msg%\n" +*.* -/home/rger/proj/rsyslog/logfile +kern.* -/home/rger/proj/rsyslog/logfile +$ActionExecOnlyWhenPreviousIsSuspended on +& -/tmp/xyz/uuu +$ActionExecOnlyWhenPreviousIsSuspended off +& ~ +& -/tmp/xyz/uuu2 +& -/tmp/xyz/uuu3 + + +#$template dynfile,"/home/rger/proj/rsyslog/test-%syslogtag%" +#*.* -?dynfile +#:msg, ereregex, "test|tast" /home/rger/proj/rsyslog/ere +#if strlen($syslogtag & strlen($msg)) > 10 then /home/rger/proj/rsyslog/longlog +#if strlen($msg) > 10 then /home/rger/proj/rsyslog/longlog +#if tolower($msg) contains 'test' then /home/rger/proj/rsyslog/longlog +#if $msg contains 'test' then /home/rger/proj/rsyslog/longlog + +#$ActionOMProgBinary /home/rger/proj/rsyslog/consumer +#*.* :omprog: + +#$actionresumeretryCount -1 +#$actionResumeInterval 4 +#$template dynfile,"/mnt2/logs/logfile.log" +#*.* /mnt2/logs/logfile.log +#if $msg contains 'test' then ?dynfile +#*.* ?dynfile +:msg, contains, "test " /tmpo/sdafsdf + +$ActionName write_system_log_2 +if $msg == 'test' then /tmpo/sdafsdf2 +& /tmpo/234234 +*.* @@(o,z9)172.19.3.21:10514 +$GenerateConfigGraph /home/rger/proj/rsyslog/rsyslog.dot diff --git a/doc/rsyslog_confgraph_complex.png b/doc/rsyslog_confgraph_complex.png Binary files differnew file mode 100644 index 00000000..21c04c57 --- /dev/null +++ b/doc/rsyslog_confgraph_complex.png diff --git a/doc/rsyslog_confgraph_std.conf b/doc/rsyslog_confgraph_std.conf new file mode 100644 index 00000000..64c9a18a --- /dev/null +++ b/doc/rsyslog_confgraph_std.conf @@ -0,0 +1,79 @@ +#rsyslog v3 config file + +# if you experience problems, check +# http://www.rsyslog.com/troubleshoot for assistance + +#### MODULES #### + +$ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command) +$ModLoad imklog.so # provides kernel logging support (previously done by rklogd) +#$ModLoad immark.so # provides --MARK-- message capability + +# Provides UDP syslog reception +#$ModLoad imudp.so +#$UDPServerRun 514 + +# Provides TCP syslog reception +#$ModLoad imtcp.so +#$InputTCPServerRun 514 + + +#### GLOBAL DIRECTIVES #### + +# Use default timestamp format +$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat + +# File syncing capability is disabled by default. This feature is usually not required, +# not useful and an extreme performance hit +#$ActionFileEnableSync on + + +#### RULES #### + +# Log all kernel messages to the console. +# Logging much else clutters up the screen. +#kern.* /dev/console + +# Log anything (except mail) of level info or higher. +# Don't log private authentication messages! +*.info;mail.none;authpriv.none;cron.none /var/log/messages + +# The authpriv file has restricted access. +authpriv.* /var/log/secure + +# Log all the mail messages in one place. +mail.* -/var/log/maillog + + +# Log cron stuff +cron.* /var/log/cron + +# Everybody gets emergency messages +*.emerg * + +# Save news errors of level crit and higher in a special file. +uucp,news.crit /var/log/spooler + +# Save boot messages also to boot.log +local7.* /var/log/boot.log + + + +# ### begin forwarding rule ### +# The statement between the begin ... end define a SINGLE forwarding +# rule. They belong together, do NOT split them. If you create multiple +# forwarding rules, duplicate the whole block! +# Remote Logging (we use TCP for reliable delivery) +# +# An on-disk queue is created for this action. If the remote host is +# down, messages are spooled to disk and sent when it is up again. +#$WorkDirectory /var/spppl/rsyslog # where to place spool files +#$ActionQueueFileName fwdRule1 # unique name prefix for spool files +#$ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) +#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown +$ActionQueueType LinkedList # run asynchronously +#$ActionResumeRetryCount -1 # infinite retries if host is down +# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional +*.* @@remote-host:514 +# ### end of the forwarding rule ### +$GenerateConfigGraph /home/rger/proj/rsyslog/rsyslog.dot diff --git a/doc/rsyslog_confgraph_std.png b/doc/rsyslog_confgraph_std.png Binary files differnew file mode 100644 index 00000000..655a7f82 --- /dev/null +++ b/doc/rsyslog_confgraph_std.png diff --git a/doc/rsyslog_high_database_rate.html b/doc/rsyslog_high_database_rate.html index 158a4df6..2bae58c6 100644 --- a/doc/rsyslog_high_database_rate.html +++ b/doc/rsyslog_high_database_rate.html @@ -7,6 +7,7 @@ </head> <body> +<a href="features.html">back</a> <h1>Handling a massive syslog database insert rate with Rsyslog</h1> @@ -171,6 +172,14 @@ comments or find bugs (I *do* bugs - no way... ;)), please http://www.gnu.org/copyleft/fdl.html</a>.</p> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> </body> diff --git a/doc/rsyslog_mysql.html b/doc/rsyslog_mysql.html index 753c86ec..a27bd59e 100644 --- a/doc/rsyslog_mysql.html +++ b/doc/rsyslog_mysql.html @@ -1,6 +1,6 @@ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html><head><title>Writing syslog Data to MySQL</title> - +<a href="features.html">back</a> <meta name="KEYWORDS" content="syslog, mysql, syslog to mysql, howto"></head> <body> <h1>Writing syslog messages to MySQL</h1> @@ -259,4 +259,13 @@ document under the terms of the GNU Free Documentation License, Version with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be viewed at <a href="http://www.gnu.org/copyleft/fdl.html"> http://www.gnu.org/copyleft/fdl.html</a>.</p> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> + </body></html> diff --git a/doc/rsyslog_ng_comparison.html b/doc/rsyslog_ng_comparison.html index 2f383f78..8e121a8d 100644 --- a/doc/rsyslog_ng_comparison.html +++ b/doc/rsyslog_ng_comparison.html @@ -1,6 +1,7 @@ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html><head><title>rsyslog vs. syslog-ng - a comparison</title></head> <body> +<a href="features.html">back</a> <h1>rsyslog vs. syslog-ng</h1> <p><small><i>Written by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> (2008-05-06)</i></small></p> @@ -584,4 +585,13 @@ feature sheet. I have not yet been able to fully work through it. In the mean time, you may want to read it in parallel. It is available at <a href="http://www.balabit.com/network-security/syslog-ng/features/detailed/">Balabit's site</a>.</p> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> + </body></html> diff --git a/doc/rsyslog_stunnel.html b/doc/rsyslog_stunnel.html index 1d024934..f0c0b3af 100644 --- a/doc/rsyslog_stunnel.html +++ b/doc/rsyslog_stunnel.html @@ -1,5 +1,6 @@ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html><head> +<a href="features.html">back</a> <title>SSL Encrypting syslog with stunnel</title><meta name="KEYWORDS" content="syslog encryption, rsyslog, stunnel, secure syslog, tcp, reliable, howto, ssl"></head><body> <h1>SSL Encrypting Syslog with Stunnel</h1> @@ -236,5 +237,13 @@ comments or find bugs (I *do* bugs - no way... ;)), please Texts. A copy of the license can be viewed at <a href="http://www.gnu.org/copyleft/fdl.html"> http://www.gnu.org/copyleft/fdl.html</a>.</p> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> </body></html> diff --git a/doc/rsyslog_tls.html b/doc/rsyslog_tls.html index 0a27b90e..bb312c77 100644 --- a/doc/rsyslog_tls.html +++ b/doc/rsyslog_tls.html @@ -1,5 +1,6 @@ <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html><head><title>TLS (SSL) Encrypting syslog</title> +<a href="features.html">back</a> <meta name="KEYWORDS" content="syslog encryption, rsyslog, secure syslog, tcp, reliable, howto, ssl, tls"> </head> @@ -304,4 +305,13 @@ document under the terms of the GNU Free Documentation License, Version with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be viewed at <a href="http://www.gnu.org/copyleft/fdl.html">http://www.gnu.org/copyleft/fdl.html</a>.</p> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> + </body></html> diff --git a/doc/src/dataflow.dia b/doc/src/dataflow.dia Binary files differnew file mode 100644 index 00000000..3875fc61 --- /dev/null +++ b/doc/src/dataflow.dia diff --git a/doc/src/direct_queue0.dia b/doc/src/direct_queue0.dia Binary files differnew file mode 100644 index 00000000..4446619b --- /dev/null +++ b/doc/src/direct_queue0.dia diff --git a/doc/src/direct_queue1.dia b/doc/src/direct_queue1.dia Binary files differnew file mode 100644 index 00000000..7a64ea09 --- /dev/null +++ b/doc/src/direct_queue1.dia diff --git a/doc/src/direct_queue2.dia b/doc/src/direct_queue2.dia Binary files differnew file mode 100644 index 00000000..b0c394c0 --- /dev/null +++ b/doc/src/direct_queue2.dia diff --git a/doc/src/direct_queue3.dia b/doc/src/direct_queue3.dia Binary files differnew file mode 100644 index 00000000..bc477b25 --- /dev/null +++ b/doc/src/direct_queue3.dia diff --git a/doc/src/direct_queue_directq.dia b/doc/src/direct_queue_directq.dia Binary files differnew file mode 100644 index 00000000..37fdb44c --- /dev/null +++ b/doc/src/direct_queue_directq.dia diff --git a/doc/src/direct_queue_rsyslog.dia b/doc/src/direct_queue_rsyslog.dia Binary files differnew file mode 100644 index 00000000..9a030117 --- /dev/null +++ b/doc/src/direct_queue_rsyslog.dia diff --git a/doc/src/direct_queue_rsyslog2.dia b/doc/src/direct_queue_rsyslog2.dia Binary files differnew file mode 100644 index 00000000..c596f39f --- /dev/null +++ b/doc/src/direct_queue_rsyslog2.dia diff --git a/doc/src/queue_analogy_tv.dia b/doc/src/queue_analogy_tv.dia Binary files differnew file mode 100644 index 00000000..00fbdeb5 --- /dev/null +++ b/doc/src/queue_analogy_tv.dia diff --git a/doc/status.html b/doc/status.html index 5c8409ec..4e8f1a5f 100644 --- a/doc/status.html +++ b/doc/status.html @@ -2,29 +2,30 @@ <html><head><title>rsyslog status page</title></head> <body> <h2>rsyslog status page</h2> -<p>This page reflects the status as of 2008-10-22.</p> +<p>This page reflects the status as of 2009-05-25.</p> <h2>Current Releases</h2> -<p><b>development:</b> 3.21.6 [2008-10-22] - -<a href="http://www.rsyslog.com/Article292.phtml">change log</a> - -<a href="http://www.rsyslog.com/Downloads-req-viewdownloaddetails-lid-135.phtml">download</a> +<p><b>development:</b> 4.3.1 [2009-05-25] - +<a href="http://www.rsyslog.com/Article372.phtml">change log</a> - +<a href="http://www.rsyslog.com/Downloads-req-viewdownloaddetails-lid-159.phtml">download</a> -<br><b>beta:</b> 3.19.12 [2008-10-16] - -<a href="http://www.rsyslog.com/Article283.phtml">change log</a> - -<a href="http://www.rsyslog.com/Downloads-req-viewdownloaddetails-lid-134.phtml">download</a></p> +<br><b>beta:</b> 3.21.11 [2009-04-03] - +<a href="http://www.rsyslog.com/Article358.phtml">change log</a> - +<a href="http://www.rsyslog.com/Downloads-req-viewdownloaddetails-lid-152.phtml">download</a></p> -<p><b>v3 stable:</b> 3.18.5 [2008-10-09] - <a href="http://www.rsyslog.com/Article281.phtml">change log</a> - -<a href="http://www.rsyslog.com/Downloads-req-viewdownloaddetails-lid-133.phtml">download</a> +<p><b>v3 stable:</b> 3.22.0 [2009-04-21] - <a href="http://www.rsyslog.com/Article368.phtml">change log</a> - +<a href="http://www.rsyslog.com/Downloads-req-viewdownloaddetails-lid-157.phtml">download</a> -<br><b>v2 stable:</b> 2.0.6 [2008-08-07] - <a href="http://www.rsyslog.com/Article266.phtml">change log</a> - -<a href="http://www.rsyslog.com/Downloads-req-viewdownloaddetails-lid-125.phtml">download</a> +<br><b>v2 stable:</b> 2.0.7 [2009-04-14] - <a href="http://www.rsyslog.com/Article362.phtml">change log</a> - +<a href="http://www.rsyslog.com/Downloads-req-viewdownloaddetails-lid-154.phtml">download</a> <br>v0 and v1 are deprecated and no longer supported. If you absolutely do not like to upgrade, you may consider purchasing a <a href="professional_support.html">commercial rsyslog support package</a>. Just let us point out that it is really not a good idea to still run a v0 version. <p><a href="v3compatibility.html">If you updgrade from version 2, be sure to read the rsyslog v3 -compatibility document.</a></p> +compatibility document.</a> There are no additional compatibility concerns at this time for +upgrading from v3 to v4. If some occur, we will post an additional compatiblity document.</p> <p>(<a href="version_naming.html">How are versions named?</a>)</p> <h2>Platforms</h2> diff --git a/doc/syslog_protocol.html b/doc/syslog_protocol.html index 72de5c27..57eb9ffe 100644 --- a/doc/syslog_protocol.html +++ b/doc/syslog_protocol.html @@ -3,6 +3,7 @@ <title>syslog-protocol support in rsyslog</title> </head> <body> +<a href="features.html">back</a> <h1>syslog-protocol support in rsyslog</h1> <p><b><a href="http://www.rsyslog.com/">Rsyslog</a> provides a trial implementation of the proposed @@ -191,6 +192,14 @@ discussed ;)</p> syslog-protocol should be further evaluated and be fully understood</li> </ul> <p> </p> +<p>[<a href="manual.html">manual index</a>] +[<a href="rsyslog_conf.html">rsyslog.conf</a>] +[<a href="http://www.rsyslog.com/">rsyslog site</a>]</p> +<p><font size="2">This documentation is part of the +<a href="http://www.rsyslog.com/">rsyslog</a> project.<br> +Copyright © 2008 by <a href="http://www.gerhards.net/rainer">Rainer Gerhards</a> and +<a href="http://www.adiscon.com/">Adiscon</a>. Released under the GNU GPL +version 2 or higher.</font></p> </body> </html> diff --git a/doc/troubleshoot.html b/doc/troubleshoot.html index e655c2ef..a8855fd4 100644 --- a/doc/troubleshoot.html +++ b/doc/troubleshoot.html @@ -18,7 +18,14 @@ is a rsyslog-doc package, that often needs to be installed separately. <p><b>Malformed Messages and Message Properties</b> <p>A common trouble source are <a href="syslog_parsing.html">ill-formed syslog messages</a>, which lead to to all sorts of interesting problems, including malformed hostnames and dates. -Read the quoted guide to find relief. +Read the quoted guide to find relief. A common symptom is that the %HOSTNAME% property is +used for generating dynafile names, but some glibberish shows up. This is caused by the +malformed syslog messages, so be sure to read the +<a href="syslog_parsing.html">guide</a> if you face that problem. Just let me add that the +common work-around is to use %FROMHOST% or %FROMHOST-IP% instead. These do not take the +hostname from the message, but rather use the host that sent the message (taken from +the socket layer). Of course, this does not work over NAT or relay chains, where the +only cure is to make sure senders emit well-formed messages. <p><b>Configuration Problems</b> <p>Rsyslog 3.21.1 and above has been enhanced to support extended configuration checking. It offers a special command line switch (-N1) that puts it into "config verfication mode". @@ -28,6 +35,15 @@ mode can be used in parallel to a running instance of rsyslogd. <p><b><i>/path/to/rsyslogd -f/path/to/config-file -N1</i></b> <p>You should also specify other options you usually give (like -c3 and whatever else). Any problems experienced are reported to stderr [aka "your screen" (if not redirected)]. +<p><b>Configuration Graphs</b> +<p>Starting with rsyslog 4.3.1, the +"<a href="rsconf1_generateconfiggraph.html">$GenerateConfigGraph</a>" +command is supported, a very valuable troubleshooting tool. It permits to +generate a graph of how rsyslogd understood its configuration file. It is assumed that +many configuration issues can easily be detected just by looking at the configuration graph. +Full details of how to generate the graphs, and what to look for can be found in the +"<a href="rsconf1_generateconfiggraph.html">$GenerateConfigGraph</a>" +manual page. <p><b>Asking for Help</b> <p>If you can't find the answer yourself, you should look at these places for community help. diff --git a/m4/shave.m4 b/m4/shave.m4 new file mode 100644 index 00000000..e647e579 --- /dev/null +++ b/m4/shave.m4 @@ -0,0 +1,99 @@ +dnl Make automake/libtool output more friendly to humans +dnl +dnl Copyright (c) 2009, Damien Lespiau <damien.lespiau@gmail.com> +dnl +dnl Permission is hereby granted, free of charge, to any person +dnl obtaining a copy of this software and associated documentation +dnl files (the "Software"), to deal in the Software without +dnl restriction, including without limitation the rights to use, +dnl copy, modify, merge, publish, distribute, sublicense, and/or sell +dnl copies of the Software, and to permit persons to whom the +dnl Software is furnished to do so, subject to the following +dnl conditions: +dnl +dnl The above copyright notice and this permission notice shall be +dnl included in all copies or substantial portions of the Software. +dnl +dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +dnl EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES +dnl OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +dnl NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT +dnl HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +dnl WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +dnl FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +dnl OTHER DEALINGS IN THE SOFTWARE. +dnl +dnl SHAVE_INIT([shavedir],[default_mode]) +dnl +dnl shavedir: the directory where the shave scripts are, it defaults to +dnl $(top_builddir) +dnl default_mode: (enable|disable) default shave mode. This parameter +dnl controls shave's behaviour when no option has been +dnl given to configure. It defaults to disable. +dnl +dnl * SHAVE_INIT should be called late in your configure.(ac|in) file (just +dnl before AC_CONFIG_FILE/AC_OUTPUT is perfect. This macro rewrites CC and +dnl LIBTOOL, you don't want the configure tests to have these variables +dnl re-defined. +dnl * This macro requires GNU make's -s option. + +AC_DEFUN([_SHAVE_ARG_ENABLE], +[ + AC_ARG_ENABLE([shave], + AS_HELP_STRING( + [--enable-shave], + [use shave to make the build pretty [[default=$1]]]),, + [enable_shave=$1] + ) +]) + +AC_DEFUN([SHAVE_INIT], +[ + dnl you can tweak the default value of enable_shave + m4_if([$2], [enable], [_SHAVE_ARG_ENABLE(yes)], [_SHAVE_ARG_ENABLE(no)]) + + if test x"$enable_shave" = xyes; then + dnl where can we find the shave scripts? + m4_if([$1],, + [shavedir="$ac_pwd"], + [shavedir="$ac_pwd/$1"]) + AC_SUBST(shavedir) + + dnl make is now quiet + AC_SUBST([MAKEFLAGS], [-s]) + AC_SUBST([AM_MAKEFLAGS], ['`test -z $V && echo -s`']) + + dnl we need sed + AC_CHECK_PROG(SED,sed,sed,false) + + dnl substitute libtool + SHAVE_SAVED_LIBTOOL=$LIBTOOL + LIBTOOL="${SHELL} ${shavedir}/shave-libtool '${SHAVE_SAVED_LIBTOOL}'" + AC_SUBST(LIBTOOL) + + dnl substitute cc/cxx + SHAVE_SAVED_CC=$CC + SHAVE_SAVED_CXX=$CXX + SHAVE_SAVED_FC=$FC + SHAVE_SAVED_F77=$F77 + SHAVE_SAVED_OBJC=$OBJC + CC="${SHELL} ${shavedir}/shave cc ${SHAVE_SAVED_CC}" + CXX="${SHELL} ${shavedir}/shave cxx ${SHAVE_SAVED_CXX}" + FC="${SHELL} ${shavedir}/shave fc ${SHAVE_SAVED_FC}" + F77="${SHELL} ${shavedir}/shave f77 ${SHAVE_SAVED_F77}" + OBJC="${SHELL} ${shavedir}/shave objc ${SHAVE_SAVED_OBJC}" + AC_SUBST(CC) + AC_SUBST(CXX) + AC_SUBST(FC) + AC_SUBST(F77) + AC_SUBST(OBJC) + + V=@ + else + V=1 + fi + Q='$(V:1=)' + AC_SUBST(V) + AC_SUBST(Q) +]) + diff --git a/outchannel.c b/outchannel.c index 5c348b63..4f8abb32 100644 --- a/outchannel.c +++ b/outchannel.c @@ -105,22 +105,22 @@ static rsRetVal get_Field(uchar **pp, uchar **pField) skip_Comma((char**)pp); p = *pp; - CHKiRet(rsCStrConstruct(&pStrB)); + CHKiRet(cstrConstruct(&pStrB)); rsCStrSetAllocIncrement(pStrB, 32); /* copy the field */ while(*p && *p != ' ' && *p != ',') { - CHKiRet(rsCStrAppendChar(pStrB, *p++)); + CHKiRet(cstrAppendChar(pStrB, *p++)); } *pp = p; - CHKiRet(rsCStrFinish(pStrB)); - CHKiRet(rsCStrConvSzStrAndDestruct(pStrB, pField, 0)); + CHKiRet(cstrFinalize(pStrB)); + CHKiRet(cstrConvSzStrAndDestruct(pStrB, pField, 0)); finalize_it: if(iRet != RS_RET_OK) { if(pStrB != NULL) - rsCStrDestruct(&pStrB); + cstrDestruct(&pStrB); } RETiRet; @@ -174,22 +174,22 @@ static inline rsRetVal get_restOfLine(uchar **pp, uchar **pBuf) skip_Comma((char**)pp); p = *pp; - CHKiRet(rsCStrConstruct(&pStrB)); + CHKiRet(cstrConstruct(&pStrB)); rsCStrSetAllocIncrement(pStrB, 32); /* copy the field */ while(*p) { - CHKiRet(rsCStrAppendChar(pStrB, *p++)); + CHKiRet(cstrAppendChar(pStrB, *p++)); } *pp = p; - CHKiRet(rsCStrFinish(pStrB)); - CHKiRet(rsCStrConvSzStrAndDestruct(pStrB, pBuf, 0)); + CHKiRet(cstrFinalize(pStrB)); + CHKiRet(cstrConvSzStrAndDestruct(pStrB, pBuf, 0)); finalize_it: if(iRet != RS_RET_OK) { if(pStrB != NULL) - rsCStrDestruct(&pStrB); + cstrDestruct(&pStrB); } RETiRet; @@ -268,7 +268,7 @@ rsRetVal parsDelimCStr(rsParsObj *pThis, cstr_t **ppCStr, char cDelim, int bTrim /* We got the string, now take it and see if we need to * remove anything at its end. */ - CHKiRet(rsCStrFinish(pCStr)); + CHKiRet(cstrFinalize(pCStr)); if(bTrimTrailing) { CHKiRet(rsCStrTrimTrailingWhiteSpace(pCStr)); @@ -344,7 +344,7 @@ rsRetVal parsQuotedCStr(rsParsObj *pThis, cstr_t **ppCStr) } /* We got the string, let's finish it... */ - CHKiRet(rsCStrFinish(pCStr)); + CHKiRet(cstrFinalize(pCStr)); /* done! */ *ppCStr = pCStr; @@ -380,7 +380,7 @@ rsRetVal parsAddrWithBits(rsParsObj *pThis, struct NetAddr **pIP, int *pBits) assert(pIP != NULL); assert(pBits != NULL); - CHKiRet(rsCStrConstruct(&pCStr)); + CHKiRet(cstrConstruct(&pCStr)); parsSkipWhitespace(pThis); pC = rsCStrGetBufBeg(pThis->pCStr) + pThis->iCurrPos; @@ -390,8 +390,8 @@ rsRetVal parsAddrWithBits(rsParsObj *pThis, struct NetAddr **pIP, int *pBits) */ while(pThis->iCurrPos < rsCStrLen(pThis->pCStr) && *pC != '/' && *pC != ',' && !isspace((int)*pC)) { - if((iRet = rsCStrAppendChar(pCStr, *pC)) != RS_RET_OK) { - rsCStrDestruct (&pCStr); + if((iRet = cstrAppendChar(pCStr, *pC)) != RS_RET_OK) { + cstrDestruct (&pCStr); FINALIZE; } ++pThis->iCurrPos; @@ -399,15 +399,15 @@ rsRetVal parsAddrWithBits(rsParsObj *pThis, struct NetAddr **pIP, int *pBits) } /* We got the string, let's finish it... */ - if((iRet = rsCStrFinish(pCStr)) != RS_RET_OK) { - rsCStrDestruct (&pCStr); + if((iRet = cstrFinalize(pCStr)) != RS_RET_OK) { + cstrDestruct(&pCStr); FINALIZE; } /* now we have the string and must check/convert it to * an NetAddr structure. */ - CHKiRet(rsCStrConvSzStrAndDestruct(pCStr, &pszIP, 0)); + CHKiRet(cstrConvSzStrAndDestruct(pCStr, &pszIP, 0)); *pIP = calloc(1, sizeof(struct NetAddr)); diff --git a/plugins/cust1/Makefile.am b/plugins/cust1/Makefile.am new file mode 100644 index 00000000..d2e075f9 --- /dev/null +++ b/plugins/cust1/Makefile.am @@ -0,0 +1,6 @@ +pkglib_LTLIBRARIES = cust1.la + +cust1_la_SOURCES = cust1.c +cust1_la_CPPFLAGS = -I$(top_srcdir) $(PTHREADS_CFLAGS) $(RSRT_CFLAGS) +cust1_la_LDFLAGS = -module -avoid-version +cust1_la_LIBADD = diff --git a/plugins/im3195/im3195.c b/plugins/im3195/im3195.c index 1c2502fe..106da2c8 100644 --- a/plugins/im3195/im3195.c +++ b/plugins/im3195/im3195.c @@ -47,6 +47,7 @@ #include "liblogging/syslogmessage.h" #include "module-template.h" #include "cfsysline.h" +#include "msg.h" #include "errmsg.h" MODULE_TYPE_INPUT @@ -83,7 +84,7 @@ void OnReceive(srAPIObj __attribute__((unused)) *pMyAPI, srSLMGObj* pSLMG) srSLMGGetRawMSG(pSLMG, &pszRawMsg); parseAndSubmitMessage(fromHost, fromHostIP, pszRawMsg, strlen((char*)pszRawMsg), - MSG_PARSE_HOSTNAME, NOFLAG, eFLOWCTL_FULL_DELAY, (uchar*)"im3195"); + PARSE_HOSTNAME, eFLOWCTL_FULL_DELAY, (uchar*)"im3195", NULL, 0); } diff --git a/plugins/imdiag/imdiag.c b/plugins/imdiag/imdiag.c index 77e99236..51f319ca 100644 --- a/plugins/imdiag/imdiag.c +++ b/plugins/imdiag/imdiag.c @@ -1,5 +1,3 @@ -#warning "imdiag is NOT supported in this version of rsyslog" -#if 0 /* imdiag.c * This is a diagnostics module, primarily meant for troubleshooting * and information about the runtime state of rsyslog. It is implemented @@ -9,7 +7,7 @@ * * File begun on 2008-07-25 by RGerhards * - * Copyright 2008 Rainer Gerhards and Adiscon GmbH. + * Copyright 2008, 2009 Rainer Gerhards and Adiscon GmbH. * * This file is part of rsyslog. * @@ -28,8 +26,8 @@ * * A copy of the GPL can be found in the file "COPYING" in this distribution. */ - #include "config.h" +#include <stdio.h> #include <stdlib.h> #include <assert.h> #include <string.h> @@ -45,117 +43,380 @@ #include <fcntl.h> #endif #include "rsyslog.h" -//#include "dirty.h" +#include "dirty.h" #include "cfsysline.h" #include "module-template.h" +#include "unicode-helper.h" #include "net.h" #include "netstrm.h" #include "errmsg.h" +#include "tcpsrv.h" +#include "srUtils.h" +#include "msg.h" +#include "datetime.h" +#include "net.h" /* for permittedPeers, may be removed when this is removed */ MODULE_TYPE_INPUT /* static data */ DEF_IMOD_STATIC_DATA +DEFobjCurrIf(tcpsrv) +DEFobjCurrIf(tcps_sess) DEFobjCurrIf(net) DEFobjCurrIf(netstrm) DEFobjCurrIf(errmsg) +DEFobjCurrIf(datetime) /* Module static data */ -netstrms_t *pNS; /**< pointer to network stream subsystem */ -netstrm_t **ppLstn[10]; /**< our netstream listners */ -int iLstnMax = 0; /**< max nbr of listeners currently supported */ +static tcpsrv_t *pOurTcpsrv = NULL; /* our TCP server(listener) TODO: change for multiple instances */ +static permittedPeers_t *pPermPeersRoot = NULL; /* config settings */ +static int iTCPSessMax = 20; /* max number of sessions */ +static int iStrmDrvrMode = 0; /* mode for stream driver, driver-dependent (0 mostly means plain tcp) */ +static uchar *pszStrmDrvrAuthMode = NULL; /* authentication mode to use */ +static uchar *pszInputName = NULL; /* value for inputname property, NULL is OK and handled by core engine */ + + +/* callbacks */ +/* this shall go into a specific ACL module! */ +static int +isPermittedHost(struct sockaddr __attribute__((unused)) *addr, char __attribute__((unused)) *fromHostFQDN, + void __attribute__((unused)) *pUsrSrv, void __attribute__((unused)) *pUsrSess) +{ + return 1; /* TODO: implement ACLs ... or via some other way? */ +} + + +static rsRetVal +doOpenLstnSocks(tcpsrv_t *pSrv) +{ + ISOBJ_TYPE_assert(pSrv, tcpsrv); + return tcpsrv.create_tcp_socket(pSrv); +} + + +static rsRetVal +doRcvData(tcps_sess_t *pSess, char *buf, size_t lenBuf, ssize_t *piLenRcvd) +{ + DEFiRet; + assert(pSess != NULL); + assert(piLenRcvd != NULL); + + *piLenRcvd = lenBuf; + CHKiRet(netstrm.Rcv(pSess->pStrm, (uchar*) buf, piLenRcvd)); +finalize_it: + RETiRet; +} + +static rsRetVal +onRegularClose(tcps_sess_t *pSess) +{ + DEFiRet; + assert(pSess != NULL); + + /* process any incomplete frames left over */ + tcps_sess.PrepareClose(pSess); + /* Session closed */ + tcps_sess.Close(pSess); + RETiRet; +} + + +static rsRetVal +onErrClose(tcps_sess_t *pSess) +{ + DEFiRet; + assert(pSess != NULL); + + tcps_sess.Close(pSess); + RETiRet; +} + +/* ------------------------------ end callbacks ------------------------------ */ + + +/* get the first word delimited by space from a given string. The pointer is + * advanced to after the word. Any leading spaces are discarded. If the + * output buffer is too small, parsing ends on buffer full condition. + * An empty buffer is returned if there is no more data inside the string. + * rgerhards, 2009-05-27 + */ +#define TO_LOWERCASE 1 +#define NO_MODIFY 0 +static void +getFirstWord(uchar **ppszSrc, uchar *pszBuf, size_t lenBuf, int options) +{ + uchar c; + uchar *pszSrc = *ppszSrc; + + while(*pszSrc && *pszSrc == ' ') + ++pszSrc; /* skip to first non-space */ + + while(*pszSrc && *pszSrc != ' ' && lenBuf > 1) { + c = *pszSrc++; + if(options & TO_LOWERCASE) + c = tolower(c); + *pszBuf++ = c; + lenBuf--; + } + + *pszBuf = '\0'; + *ppszSrc = pszSrc; +} + + +/* send a response back to the originator + * rgerhards, 2009-05-27 + */ +static rsRetVal __attribute__((format(printf, 2, 3))) +sendResponse(tcps_sess_t *pSess, char *fmt, ...) +{ + va_list ap; + ssize_t len; + uchar buf[1024]; + DEFiRet; + + va_start(ap, fmt); + len = vsnprintf((char*)buf, sizeof(buf), fmt, ap); + va_end(ap); + CHKiRet(netstrm.Send(pSess->pStrm, buf, &len)); + +finalize_it: + RETiRet; +} + + +/* actually submit a message to the rsyslog core + */ +static rsRetVal +doInjectMsg(int iNum) +{ + uchar szMsg[1024]; + msg_t *pMsg; + struct syslogTime stTime; + time_t ttGenTime; + DEFiRet; + + snprintf((char*)szMsg, sizeof(szMsg)/sizeof(uchar), + "<167>Mar 1 01:00:00 172.20.245.8 tag msgnum:%8.8d:\n", iNum); + + datetime.getCurrTime(&stTime, &ttGenTime); + /* we now create our own message object and submit it to the queue */ + CHKiRet(msgConstructWithTime(&pMsg, &stTime, ttGenTime)); + CHKmalloc(pMsg->pszRawMsg = ustrdup(szMsg)); + pMsg->iLenRawMsg = ustrlen(szMsg); + MsgSetInputName(pMsg, UCHAR_CONSTANT("imdiag"), sizeof("imdiag")-1); + MsgSetFlowControlType(pMsg, eFLOWCTL_NO_DELAY); + pMsg->msgFlags = NEEDS_PARSING | PARSE_HOSTNAME; + pMsg->bParseHOSTNAME = 1; + MsgSetRcvFrom(pMsg, UCHAR_CONSTANT("127.0.0.1")); /* TODO: way may use the real sender here... */ + CHKiRet(MsgSetRcvFromIP(pMsg, UCHAR_CONSTANT("127.0.0.1"))); + CHKiRet(submitMsg(pMsg)); + +finalize_it: + RETiRet; +} -/* add a listen socket to our listen socket array. This is a callback - * invoked from the netstrm class. -- rgerhards, 2008-04-23 +/* This function injects messages. Command format: + * injectmsg <fromnbr> <number-of-messages> + * rgerhards, 2009-05-27 */ static rsRetVal -addTcpLstn(void *pUsr, netstrm_t *pLstn) +injectMsg(uchar *pszCmd, tcps_sess_t *pSess) { + uchar wordBuf[1024]; + int iFrom; + int nMsgs; + int i; DEFiRet; - ISOBJ_TYPE_assert(pLstn, netstrm); + /* we do not check errors here! */ + getFirstWord(&pszCmd, wordBuf, sizeof(wordBuf)/sizeof(uchar), TO_LOWERCASE); + iFrom = atoi((char*)wordBuf); + getFirstWord(&pszCmd, wordBuf, sizeof(wordBuf)/sizeof(uchar), TO_LOWERCASE); + nMsgs = atoi((char*)wordBuf); - if(iLstnMax >= sizeof(ppLstn)/sizeof(netstrm_t)) - ABORT_FINALIZE(RS_RET_MAX_LSTN_REACHED); + for(i = 0 ; i < nMsgs ; ++i) { + doInjectMsg(i + iFrom); + } - ppLstn[pThis->iLstnMax] = pLstn; - ++iLstnMax; + CHKiRet(sendResponse(pSess, "messages injected\n")); finalize_it: RETiRet; } -/* initialize network stream subsystem */ +/* This function waits until the main queue is drained (size = 0) + */ static rsRetVal -initNetstrm(void) +waitMainQEmpty(tcps_sess_t *pSess) { + int iMsgQueueSize; DEFiRet; - /* prepare network stream subsystem */ - CHKiRet(netstrms.Construct(&pNS)); - CHKiRet(netstrms.SetDrvrMode(pNS, 0)); /* always plain text */ - //CHKiRet(netstrms.SetDrvrAuthMode(pThis->pNS, pThis->pszDrvrAuthMode)); - //CHKiRet(netstrms.SetDrvrPermPeers(pThis->pNS, pThis->pPermPeers)); - // TODO: set driver! - CHKiRet(netstrms.ConstructFinalize(pThis->pNS)); + CHKiRet(diagGetMainMsgQSize(&iMsgQueueSize)); + while(iMsgQueueSize > 0) { + srSleep(0,2); /* wait a little bit */ + CHKiRet(diagGetMainMsgQSize(&iMsgQueueSize)); + } - /* set up listeners */ - CHKiRet(netstrm.LstnInit(pNS, NULL, addTcpLstn, "127.0.0.1", "44514", 1)); + CHKiRet(sendResponse(pSess, "mainqueue empty\n")); finalize_it: - if(iRet != RS_RET_OK) { - if(pThis->pNS != NULL) - netstrms.Destruct(&pThis->pNS); + RETiRet; +} + +/* Function to handle received messages. This is our core function! + * rgerhards, 2009-05-24 + */ +static rsRetVal +OnMsgReceived(tcps_sess_t *pSess, uchar *pRcv, int iLenMsg) +{ + int iMsgQueueSize; + uchar *pszMsg; + uchar cmdBuf[1024]; + DEFiRet; + + assert(pSess != NULL); + assert(pRcv != NULL); + + /* NOTE: pRcv is NOT a C-String but rather an array of characters + * WITHOUT a termination \0 char. So we need to convert it to one + * before proceeding. + */ + CHKmalloc(pszMsg = malloc(sizeof(uchar) * (iLenMsg + 1))); + memcpy(pszMsg, pRcv, iLenMsg); + pszMsg[iLenMsg] = '\0'; + + getFirstWord(&pszMsg, cmdBuf, sizeof(cmdBuf)/sizeof(uchar), TO_LOWERCASE); + + if(!ustrcmp(cmdBuf, UCHAR_CONSTANT("getmainmsgqueuesize"))) { + CHKiRet(diagGetMainMsgQSize(&iMsgQueueSize)); + CHKiRet(sendResponse(pSess, "%d\n", iMsgQueueSize)); + } else if(!ustrcmp(cmdBuf, UCHAR_CONSTANT("waitmainqueueempty"))) { + CHKiRet(waitMainQEmpty(pSess)); + } else if(!ustrcmp(cmdBuf, UCHAR_CONSTANT("injectmsg"))) { + CHKiRet(injectMsg(pszMsg, pSess)); + } else { + dbgprintf("imdiag unkown command '%s'\n", cmdBuf); + CHKiRet(sendResponse(pSess, "unkown command '%s'\n", cmdBuf)); } + +finalize_it: + RETiRet; +} + + +/* set permitted peer -- rgerhards, 2008-05-19 + */ +static rsRetVal +setPermittedPeer(void __attribute__((unused)) *pVal, uchar *pszID) +{ + DEFiRet; + CHKiRet(net.AddPermittedPeer(&pPermPeersRoot, pszID)); + free(pszID); /* no longer needed, but we need to free as of interface def */ +finalize_it: RETiRet; } -/* This function is called to gather input. In our case, it is a bit abused - * to drive the listener loop for the diagnostics code. +static rsRetVal addTCPListener(void __attribute__((unused)) *pVal, uchar *pNewVal) +{ + DEFiRet; + + if(pOurTcpsrv == NULL) { + CHKiRet(tcpsrv.Construct(&pOurTcpsrv)); + CHKiRet(tcpsrv.SetSessMax(pOurTcpsrv, iTCPSessMax)); + CHKiRet(tcpsrv.SetCBIsPermittedHost(pOurTcpsrv, isPermittedHost)); + CHKiRet(tcpsrv.SetCBRcvData(pOurTcpsrv, doRcvData)); + CHKiRet(tcpsrv.SetCBOpenLstnSocks(pOurTcpsrv, doOpenLstnSocks)); + CHKiRet(tcpsrv.SetCBOnRegularClose(pOurTcpsrv, onRegularClose)); + CHKiRet(tcpsrv.SetCBOnErrClose(pOurTcpsrv, onErrClose)); + CHKiRet(tcpsrv.SetDrvrMode(pOurTcpsrv, iStrmDrvrMode)); + CHKiRet(tcpsrv.SetOnMsgReceive(pOurTcpsrv, OnMsgReceived)); + /* now set optional params, but only if they were actually configured */ + if(pszStrmDrvrAuthMode != NULL) { + CHKiRet(tcpsrv.SetDrvrAuthMode(pOurTcpsrv, pszStrmDrvrAuthMode)); + } + if(pPermPeersRoot != NULL) { + CHKiRet(tcpsrv.SetDrvrPermPeers(pOurTcpsrv, pPermPeersRoot)); + } + } + + /* initialized, now add socket */ + CHKiRet(tcpsrv.SetInputName(pOurTcpsrv, pszInputName == NULL ? + UCHAR_CONSTANT("imdiag") : pszInputName)); + tcpsrv.configureTCPListen(pOurTcpsrv, pNewVal); + +finalize_it: + if(iRet != RS_RET_OK) { + errmsg.LogError(0, NO_ERRCODE, "error %d trying to add listener", iRet); + if(pOurTcpsrv != NULL) + tcpsrv.Destruct(&pOurTcpsrv); + } + RETiRet; +} + +/* This function is called to gather input. */ BEGINrunInput CODESTARTrunInput + CHKiRet(tcpsrv.ConstructFinalize(pOurTcpsrv)); + iRet = tcpsrv.Run(pOurTcpsrv); +finalize_it: ENDrunInput /* initialize and return if will run or not */ BEGINwillRun CODESTARTwillRun - iRet = initNetstrm(); + /* first apply some config settings */ + if(pOurTcpsrv == NULL) + ABORT_FINALIZE(RS_RET_NO_RUN); +finalize_it: ENDwillRun BEGINafterRun CODESTARTafterRun /* do cleanup here */ - /* finally close our listen streams */ - for(i = 0 ; i < iLstnMax ; ++i) { - netstrm.Destruct(ppLstn + i); - } - - /* destruct netstream subsystem */ - netstrms.Destruct(pNS); ENDafterRun BEGINmodExit CODESTARTmodExit + if(pOurTcpsrv != NULL) + iRet = tcpsrv.Destruct(&pOurTcpsrv); + + if(pPermPeersRoot != NULL) { + net.DestructPermittedPeers(&pPermPeersRoot); + } + /* release objects we used */ objRelease(net, LM_NET_FILENAME); objRelease(netstrm, LM_NETSTRMS_FILENAME); + objRelease(tcps_sess, LM_TCPSRV_FILENAME); + objRelease(tcpsrv, LM_TCPSRV_FILENAME); objRelease(errmsg, CORE_COMPONENT); + objRelease(datetime, CORE_COMPONENT); ENDmodExit static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal) { + iTCPSessMax = 200; + iStrmDrvrMode = 0; + free(pszInputName); + pszInputName = NULL; + if(pszStrmDrvrAuthMode != NULL) { + free(pszStrmDrvrAuthMode); + pszStrmDrvrAuthMode = NULL; + } return RS_RET_OK; } @@ -175,25 +436,27 @@ CODEmodInit_QueryRegCFSLineHdlr /* request objects we use */ CHKiRet(objUse(net, LM_NET_FILENAME)); CHKiRet(objUse(netstrm, LM_NETSTRMS_FILENAME)); + CHKiRet(objUse(tcps_sess, LM_TCPSRV_FILENAME)); + CHKiRet(objUse(tcpsrv, LM_TCPSRV_FILENAME)); CHKiRet(objUse(errmsg, CORE_COMPONENT)); + CHKiRet(objUse(datetime, CORE_COMPONENT)); -#if 0 /* register config file handlers */ - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpserverrun", 0, eCmdHdlrGetWord, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("imdiagserverrun"), 0, eCmdHdlrGetWord, addTCPListener, NULL, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpmaxsessions", 0, eCmdHdlrInt, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("imdiagmaxsessions"), 0, eCmdHdlrInt, NULL, &iTCPSessMax, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpserverstreamdrivermode", 0, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("imdiagserverstreamdrivermode"), 0, eCmdHdlrInt, NULL, &iStrmDrvrMode, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpserverstreamdriverauthmode", 0, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("imdiagserverstreamdriverauthmode"), 0, eCmdHdlrGetWord, NULL, &pszStrmDrvrAuthMode, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpserverstreamdriverpermittedpeer", 0, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("imdiagserverstreamdriverpermittedpeer"), 0, eCmdHdlrGetWord, setPermittedPeer, NULL, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("imdiagserverinputname"), 0, + eCmdHdlrGetWord, NULL, &pszInputName, STD_LOADABLE_MODULE_ID)); + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("resetconfigvariables"), 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID)); -#endif ENDmodInit -#endif /* vim:set ai: diff --git a/plugins/imfile/imfile.c b/plugins/imfile/imfile.c index b0211bf6..927cb82e 100644 --- a/plugins/imfile/imfile.c +++ b/plugins/imfile/imfile.c @@ -45,6 +45,7 @@ #include "errmsg.h" #include "glbl.h" #include "datetime.h" +#include "unicode-helper.h" MODULE_TYPE_INPUT /* must be present for input modules, do not remove */ @@ -94,11 +95,10 @@ static rsRetVal enqLine(fileInfo_t *pInfo, cstr_t *cstrLine) CHKiRet(msgConstruct(&pMsg)); MsgSetFlowControlType(pMsg, eFLOWCTL_FULL_DELAY); - MsgSetInputName(pMsg, "imfile"); - MsgSetUxTradMsg(pMsg, (char*)rsCStrGetSzStr(cstrLine)); + MsgSetInputName(pMsg, UCHAR_CONSTANT("imfile"), sizeof("imfile")-1); MsgSetRawMsg(pMsg, (char*)rsCStrGetSzStr(cstrLine)); MsgSetMSG(pMsg, (char*)rsCStrGetSzStr(cstrLine)); - MsgSetHOSTNAME(pMsg, (char*)glbl.GetLocalHostName()); + MsgSetHOSTNAME(pMsg, glbl.GetLocalHostName()); MsgSetTAG(pMsg, (char*)pInfo->pszTag); pMsg->iFacility = LOG_FAC(pInfo->iFacility); pMsg->iSeverity = LOG_PRI(pInfo->iSeverity); diff --git a/plugins/imgssapi/imgssapi.c b/plugins/imgssapi/imgssapi.c index debe935e..d8791880 100644 --- a/plugins/imgssapi/imgssapi.c +++ b/plugins/imgssapi/imgssapi.c @@ -9,7 +9,7 @@ * NOTE: read comments in module-template.h to understand how this file * works! * - * Copyright 2007 Rainer Gerhards and Adiscon GmbH. + * Copyright 2007, 2009 Rainer Gerhards and Adiscon GmbH. * * This file is part of rsyslog. * @@ -249,7 +249,6 @@ onErrClose(tcps_sess_t *pSess) static rsRetVal doOpenLstnSocks(tcpsrv_t *pSrv) { - int *pRet = NULL; gsssrv_t *pGSrv; DEFiRet; @@ -331,7 +330,7 @@ addGSSListener(void __attribute__((unused)) *pVal, uchar *pNewVal) CHKiRet(tcpsrv.SetCBOnSessAccept(pOurTcpsrv, onSessAccept)); CHKiRet(tcpsrv.SetCBOnRegularClose(pOurTcpsrv, onRegularClose)); CHKiRet(tcpsrv.SetCBOnErrClose(pOurTcpsrv, onErrClose)); - tcpsrv.configureTCPListen(pOurTcpsrv, (char *) pNewVal); + tcpsrv.configureTCPListen(pOurTcpsrv, pNewVal); CHKiRet(tcpsrv.ConstructFinalize(pOurTcpsrv)); } diff --git a/plugins/imklog/imklog.c b/plugins/imklog/imklog.c index 20bc34ab..420ebbf1 100644 --- a/plugins/imklog/imklog.c +++ b/plugins/imklog/imklog.c @@ -53,6 +53,7 @@ #include "datetime.h" #include "imklog.h" #include "glbl.h" +#include "unicode-helper.h" MODULE_TYPE_INPUT @@ -94,14 +95,12 @@ enqMsg(uchar *msg, uchar* pszTag, int iFacility, int iSeverity) CHKiRet(msgConstruct(&pMsg)); MsgSetFlowControlType(pMsg, eFLOWCTL_LIGHT_DELAY); - MsgSetInputName(pMsg, "imklog"); - MsgSetRawMsg(pMsg, (char*)msg); - MsgSetUxTradMsg(pMsg, (char*)msg); + MsgSetInputName(pMsg, UCHAR_CONSTANT("imklog"), sizeof("imklog")-1); MsgSetRawMsg(pMsg, (char*)msg); MsgSetMSG(pMsg, (char*)msg); - MsgSetRcvFrom(pMsg, (char*)glbl.GetLocalHostName()); + MsgSetRcvFrom(pMsg, glbl.GetLocalHostName()); MsgSetRcvFromIP(pMsg, (uchar*)"127.0.0.1"); - MsgSetHOSTNAME(pMsg, (char*)glbl.GetLocalHostName()); + MsgSetHOSTNAME(pMsg, glbl.GetLocalHostName()); MsgSetTAG(pMsg, (char*)pszTag); pMsg->iFacility = LOG_FAC(iFacility); pMsg->iSeverity = LOG_PRI(iSeverity); diff --git a/plugins/imklog/ksym_mod.c b/plugins/imklog/ksym_mod.c index 6e48e89e..be5fdee9 100644 --- a/plugins/imklog/ksym_mod.c +++ b/plugins/imklog/ksym_mod.c @@ -1,9 +1,8 @@ -/* - * ksym_mod.c - functions for building symbol lookup tables for klogd +/* ksym_mod.c - functions for building symbol lookup tables for klogd * Copyright (c) 1995, 1996 Dr. G.W. Wettstein <greg@wind.rmcc.com> * Copyright (c) 1996 Enjellic Systems Development * Copyright (c) 1998-2007 Martin Schulze <joey@infodrom.org> - * Copyright (C) 2007-2008 Rainer Gerhards <rgerhards@adiscon.com> + * Copyright (C) 2007-2009 Rainer Gerhards <rgerhards@adiscon.com> * * This file is part of rsyslog. * @@ -83,7 +82,6 @@ * Changed llseek() to lseek64() in order to skip a libc warning. */ - /* Includes. */ #include "config.h" #include <stdio.h> @@ -112,7 +110,7 @@ #define KSYMS "/proc/kallsyms" static int num_modules = 0; -struct Module *sym_array_modules = (struct Module *) 0; +struct Module *sym_array_modules = (struct Module *) NULL; static int have_modules = 0; @@ -266,7 +264,7 @@ static void FreeModules() } free(sym_array_modules); - sym_array_modules = (struct Module *) 0; + sym_array_modules = (struct Module *) NULL; num_modules = 0; return; } @@ -390,11 +388,11 @@ static int AddSymbol(line) mp->sym_array = (struct sym_table *) realloc(mp->sym_array, \ (mp->num_syms+1) * sizeof(struct sym_table)); - if ( mp->sym_array == (struct sym_table *) 0 ) + if ( mp->sym_array == (struct sym_table *) NULL ) return(0); mp->sym_array[mp->num_syms].name = strdup(p); - if ( mp->sym_array[mp->num_syms].name == (char *) 0 ) + if ( mp->sym_array[mp->num_syms].name == (char *) NULL ) return(0); /* Stuff interesting information into the module. */ @@ -424,15 +422,21 @@ static int AddSymbol(line) * If a match cannot be found a diagnostic string is printed. * If a match is found the pointer to the symbolic name most * closely matching the address is returned. + * + * TODO: We are using int values for the offset, but longs for the value + * values. This may create some trouble in the future (on 64 Bit OS?). + * Anyhow, I have not changed this, because we do not seem to have any + * issue and my understanding of this code is limited (and I don't see + * need to invest more time to dig much deeper). + * rgerhards, 2009-04-17 **************************************************************************/ extern char * LookupModuleSymbol(value, sym) unsigned long value; struct symbol *sym; { - auto int nmod, - nsym; - auto struct sym_table *last; - auto struct Module *mp; + int nmod, nsym; + struct sym_table *last; + struct Module *mp; static char ret[100]; sym->size = 0; @@ -443,8 +447,7 @@ extern char * LookupModuleSymbol(value, sym) for (nmod = 0; nmod < num_modules; ++nmod) { mp = &sym_array_modules[nmod]; - /* - * Run through the list of symbols in this module and + /* Run through the list of symbols in this module and * see if the address can be resolved. */ for(nsym = 1, last = &mp->sym_array[0]; @@ -453,13 +456,12 @@ extern char * LookupModuleSymbol(value, sym) if ( mp->sym_array[nsym].value > value ) { if ( sym->size == 0 || - (value - last->value) < sym->offset || - ( (sym->offset == (value - last->value)) && - (mp->sym_array[nsym].value-last->value) < sym->size ) ) + (int) (value - last->value) < sym->offset || + ( (sym->offset == (int) (value - last->value)) && + (int) (mp->sym_array[nsym].value-last->value) < sym->size ) ) { sym->offset = value - last->value; - sym->size = mp->sym_array[nsym].value - \ - last->value; + sym->size = mp->sym_array[nsym].value - last->value; ret[sizeof(ret)-1] = '\0'; if ( mp->name == NULL ) snprintf(ret, sizeof(ret)-1, @@ -478,5 +480,5 @@ extern char * LookupModuleSymbol(value, sym) return(ret); /* It has been a hopeless exercise. */ - return((char *) 0); + return(NULL); } diff --git a/plugins/imklog/ksyms.h b/plugins/imklog/ksyms.h index b5362ff3..a168947b 100644 --- a/plugins/imklog/ksyms.h +++ b/plugins/imklog/ksyms.h @@ -2,7 +2,7 @@ * Copyright (c) 1995, 1996 Dr. G.W. Wettstein <greg@wind.rmcc.com> * Copyright (c) 1996 Enjellic Systems Development * Copyright (c) 2004-7 Martin Schulze <joey@infodrom.org> - * Copyright (c) 2007-2008 Rainer Gerhards <rgerhards@adiscon.com> + * Copyright (c) 2007-2009 Rainer Gerhards <rgerhards@adiscon.com> * * This file is part of rsyslog. * @@ -26,7 +26,7 @@ struct symbol { - char *name; + uchar *name; int size; int offset; }; diff --git a/plugins/imklog/linux.c b/plugins/imklog/linux.c index 198b7c0e..0dd4320d 100644 --- a/plugins/imklog/linux.c +++ b/plugins/imklog/linux.c @@ -144,7 +144,7 @@ static enum LOGSRC GetKernelLogSrc(void) return(kernel); } - if ( (kmsg = open(_PATH_KLOG, O_RDONLY)) < 0 ) + if ( (kmsg = open(_PATH_KLOG, O_RDONLY|O_CLOEXEC)) < 0 ) { imklogLogIntMsg(LOG_ERR, "imklog: Cannot open proc file system, %d.\n", errno); ksyslog(7, NULL, 0); /* TODO: check this, implement more */ diff --git a/plugins/immark/immark.c b/plugins/immark/immark.c index 323da3fe..8504f872 100644 --- a/plugins/immark/immark.c +++ b/plugins/immark/immark.c @@ -41,6 +41,7 @@ #include "cfsysline.h" #include "module-template.h" #include "errmsg.h" +#include "msg.h" MODULE_TYPE_INPUT diff --git a/plugins/imrelp/imrelp.c b/plugins/imrelp/imrelp.c index f4e1444c..524d1a35 100644 --- a/plugins/imrelp/imrelp.c +++ b/plugins/imrelp/imrelp.c @@ -42,6 +42,7 @@ #include "cfsysline.h" #include "module-template.h" #include "net.h" +#include "msg.h" MODULE_TYPE_INPUT @@ -83,9 +84,8 @@ static relpRetVal onSyslogRcv(uchar *pHostname, uchar *pIP, uchar *pMsg, size_t lenMsg) { DEFiRet; - parseAndSubmitMessage(pHostname, pIP, pMsg, lenMsg, MSG_PARSE_HOSTNAME, - NOFLAG, eFLOWCTL_LIGHT_DELAY, (uchar*)"imrelp"); - + parseAndSubmitMessage(pHostname, pIP, pMsg, lenMsg, PARSE_HOSTNAME, + eFLOWCTL_LIGHT_DELAY, (uchar*)"imrelp", NULL, 0); RETiRet; } diff --git a/plugins/imtcp/imtcp.c b/plugins/imtcp/imtcp.c index 7b3eeda5..84e660bc 100644 --- a/plugins/imtcp/imtcp.c +++ b/plugins/imtcp/imtcp.c @@ -3,7 +3,7 @@ * * File begun on 2007-12-21 by RGerhards (extracted from syslogd.c) * - * Copyright 2007 Rainer Gerhards and Adiscon GmbH. + * Copyright 2007, 2009 Rainer Gerhards and Adiscon GmbH. * * This file is part of rsyslog. * @@ -56,6 +56,7 @@ #include "dirty.h" #include "cfsysline.h" #include "module-template.h" +#include "unicode-helper.h" #include "net.h" #include "netstrm.h" #include "errmsg.h" @@ -80,7 +81,9 @@ static permittedPeers_t *pPermPeersRoot = NULL; /* config settings */ static int iTCPSessMax = 200; /* max number of sessions */ static int iStrmDrvrMode = 0; /* mode for stream driver, driver-dependent (0 mostly means plain tcp) */ +static int iAddtlFrameDelim = TCPSRV_NO_ADDTL_DELIMITER; /* addtl frame delimiter, e.g. for netscreen, default none */ static uchar *pszStrmDrvrAuthMode = NULL; /* authentication mode to use */ +static uchar *pszInputName = NULL; /* value for inputname property, NULL is OK and handled by core engine */ /* callbacks */ @@ -89,7 +92,7 @@ static int isPermittedHost(struct sockaddr *addr, char *fromHostFQDN, void __attribute__((unused)) *pUsrSrv, void __attribute__((unused)) *pUsrSess) { - return net.isAllowedSender((uchar*) "TCP", addr, fromHostFQDN); + return net.isAllowedSender(UCHAR_CONSTANT("TCP"), addr, fromHostFQDN); } @@ -167,6 +170,7 @@ static rsRetVal addTCPListener(void __attribute__((unused)) *pVal, uchar *pNewVa CHKiRet(tcpsrv.SetCBOnRegularClose(pOurTcpsrv, onRegularClose)); CHKiRet(tcpsrv.SetCBOnErrClose(pOurTcpsrv, onErrClose)); CHKiRet(tcpsrv.SetDrvrMode(pOurTcpsrv, iStrmDrvrMode)); + CHKiRet(tcpsrv.SetAddtlFrameDelim(pOurTcpsrv, iAddtlFrameDelim)); /* now set optional params, but only if they were actually configured */ if(pszStrmDrvrAuthMode != NULL) { CHKiRet(tcpsrv.SetDrvrAuthMode(pOurTcpsrv, pszStrmDrvrAuthMode)); @@ -174,11 +178,13 @@ static rsRetVal addTCPListener(void __attribute__((unused)) *pVal, uchar *pNewVa if(pPermPeersRoot != NULL) { CHKiRet(tcpsrv.SetDrvrPermPeers(pOurTcpsrv, pPermPeersRoot)); } - /* most params set, now start listener */ - tcpsrv.configureTCPListen(pOurTcpsrv, (char *) pNewVal); - CHKiRet(tcpsrv.ConstructFinalize(pOurTcpsrv)); } + /* initialized, now add socket */ + CHKiRet(tcpsrv.SetInputName(pOurTcpsrv, pszInputName == NULL ? + UCHAR_CONSTANT("imtcp") : pszInputName)); + tcpsrv.configureTCPListen(pOurTcpsrv, pNewVal); + finalize_it: if(iRet != RS_RET_OK) { errmsg.LogError(0, NO_ERRCODE, "error %d trying to add listener", iRet); @@ -195,7 +201,9 @@ CODESTARTrunInput /* TODO: we must be careful to start the listener here. Currently, tcpsrv.c seems to * do that in ConstructFinalize */ + CHKiRet(tcpsrv.ConstructFinalize(pOurTcpsrv)); iRet = tcpsrv.Run(pOurTcpsrv); +finalize_it: ENDrunInput @@ -213,7 +221,7 @@ ENDwillRun BEGINafterRun CODESTARTafterRun /* do cleanup here */ - net.clearAllowedSenders((uchar*)"TCP"); + net.clearAllowedSenders(UCHAR_CONSTANT("TCP")); ENDafterRun @@ -240,6 +248,15 @@ resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unus { iTCPSessMax = 200; iStrmDrvrMode = 0; + iAddtlFrameDelim = TCPSRV_NO_ADDTL_DELIMITER; + if(pszInputName != NULL) { + free(pszInputName); + pszInputName = NULL; + } + if(pszStrmDrvrAuthMode != NULL) { + free(pszStrmDrvrAuthMode); + pszStrmDrvrAuthMode = NULL; + } return RS_RET_OK; } @@ -264,17 +281,21 @@ CODEmodInit_QueryRegCFSLineHdlr CHKiRet(objUse(errmsg, CORE_COMPONENT)); /* register config file handlers */ - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpserverrun", 0, eCmdHdlrGetWord, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("inputtcpserverrun"), 0, eCmdHdlrGetWord, addTCPListener, NULL, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpmaxsessions", 0, eCmdHdlrInt, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("inputtcpmaxsessions"), 0, eCmdHdlrInt, NULL, &iTCPSessMax, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpserverstreamdrivermode", 0, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("inputtcpserverstreamdrivermode"), 0, eCmdHdlrInt, NULL, &iStrmDrvrMode, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpserverstreamdriverauthmode", 0, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("inputtcpserverstreamdriverauthmode"), 0, eCmdHdlrGetWord, NULL, &pszStrmDrvrAuthMode, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputtcpserverstreamdriverpermittedpeer", 0, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("inputtcpserverstreamdriverpermittedpeer"), 0, eCmdHdlrGetWord, setPermittedPeer, NULL, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("inputtcpserveraddtlframedelimiter"), 0, eCmdHdlrInt, + NULL, &iAddtlFrameDelim, STD_LOADABLE_MODULE_ID)); + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("inputtcpserverinputname"), 0, + eCmdHdlrGetWord, NULL, &pszInputName, STD_LOADABLE_MODULE_ID)); + CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("resetconfigvariables"), 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID)); ENDmodInit diff --git a/plugins/imudp/imudp.c b/plugins/imudp/imudp.c index 79d51263..6f4a6384 100644 --- a/plugins/imudp/imudp.c +++ b/plugins/imudp/imudp.c @@ -6,7 +6,7 @@ * * File begun on 2007-12-21 by RGerhards (extracted from syslogd.c) * - * Copyright 2007 Rainer Gerhards and Adiscon GmbH. + * Copyright 2007-2009 Rainer Gerhards and Adiscon GmbH. * * This file is part of rsyslog. * @@ -40,6 +40,10 @@ #include "srUtils.h" #include "errmsg.h" #include "glbl.h" +#include "msg.h" +#include "parser.h" +#include "datetime.h" +#include "unicode-helper.h" MODULE_TYPE_INPUT @@ -50,6 +54,7 @@ DEF_IMOD_STATIC_DATA DEFobjCurrIf(errmsg) DEFobjCurrIf(glbl) DEFobjCurrIf(net) +DEFobjCurrIf(datetime) static int iMaxLine; /* maximum UDP message size supported */ static time_t ttLastDiscard = 0; /* timestamp when a message from a non-permitted sender was last discarded @@ -63,6 +68,8 @@ static uchar *pRcvBuf = NULL; /* receive buffer (for a single packet). We use a * it so that we can check available memory in willRun() and request * termination if we can not get it. -- rgerhards, 2007-12-27 */ +#define TIME_REQUERY_DFLT 2 +static int iTimeRequery = TIME_REQUERY_DFLT;/* how often is time to be queried inside tight recv loop? 0=always */ /* config settings */ @@ -130,20 +137,137 @@ finalize_it: } +/* This function is a helper to runInput. I have extracted it + * from the main loop just so that we do not have that large amount of code + * in a single place. This function takes a socket and pulls messages from + * it until the socket does not have any more waiting. + * rgerhards, 2008-01-08 + * We try to read from the file descriptor until there + * is no more data. This is done in the hope to get better performance + * out of the system. However, this also means that a descriptor + * monopolizes processing while it contains data. This can lead to + * data loss in other descriptors. However, if the system is incapable of + * handling the workload, we will loss data in any case. So it doesn't really + * matter where the actual loss occurs - it is always random, because we depend + * on scheduling order. -- rgerhards, 2008-10-02 + */ +static inline rsRetVal +processSocket(int fd, struct sockaddr_storage *frominetPrev, int *pbIsPermitted, + uchar *fromHost, uchar *fromHostFQDN, uchar *fromHostIP) +{ + DEFiRet; + int iNbrTimeUsed; + time_t ttGenTime; + struct syslogTime stTime; + socklen_t socklen; + ssize_t lenRcvBuf; + struct sockaddr_storage frominet; + msg_t *pMsg; + char errStr[1024]; + + iNbrTimeUsed = 0; + while(1) { /* loop is terminated if we have a bad receive, done below in the body */ + socklen = sizeof(struct sockaddr_storage); + lenRcvBuf = recvfrom(fd, (char*) pRcvBuf, iMaxLine, 0, (struct sockaddr *)&frominet, &socklen); + if(lenRcvBuf < 0) { + if(errno != EINTR && errno != EAGAIN) { + rs_strerror_r(errno, errStr, sizeof(errStr)); + DBGPRINTF("INET socket error: %d = %s.\n", errno, errStr); + errmsg.LogError(errno, NO_ERRCODE, "recvfrom inet"); + } + ABORT_FINALIZE(RS_RET_ERR); + } + + if(lenRcvBuf == 0) + continue; /* this looks a bit strange, but practice shows it happens... */ + + /* if we reach this point, we had a good receive and can process the packet received */ + /* check if we have a different sender than before, if so, we need to query some new values */ + if(net.CmpHost(&frominet, frominetPrev, socklen) != 0) { + CHKiRet(net.cvthname(&frominet, fromHost, fromHostFQDN, fromHostIP)); + memcpy(frominetPrev, &frominet, socklen); /* update cache indicator */ + /* Here we check if a host is permitted to send us + * syslog messages. If it isn't, we do not further + * process the message but log a warning (if we are + * configured to do this). + * rgerhards, 2005-09-26 + */ + *pbIsPermitted = net.isAllowedSender((uchar*)"UDP", + (struct sockaddr *)&frominet, (char*)fromHostFQDN); + + if(!*pbIsPermitted) { + DBGPRINTF("%s is not an allowed sender\n", (char*)fromHostFQDN); + if(glbl.GetOption_DisallowWarning) { + time_t tt; + + time(&tt); + if(tt > ttLastDiscard + 60) { + ttLastDiscard = tt; + errmsg.LogError(0, NO_ERRCODE, + "UDP message from disallowed sender %s discarded", + (char*)fromHost); + } + } + } + } + + DBGPRINTF("recv(%d,%d)/%s,acl:%d,msg:%.80s\n", fd, (int) lenRcvBuf, fromHost, *pbIsPermitted, pRcvBuf); + + if(*pbIsPermitted) { + if((iTimeRequery == 0) || (iNbrTimeUsed++ % iTimeRequery) == 0) { + datetime.getCurrTime(&stTime, &ttGenTime); + } + /* we now create our own message object and submit it to the queue */ + CHKiRet(msgConstructWithTime(&pMsg, &stTime, ttGenTime)); + /* first trim the buffer to what we have actually received */ + CHKmalloc(pMsg->pszRawMsg = malloc(sizeof(uchar)* lenRcvBuf)); + memcpy(pMsg->pszRawMsg, pRcvBuf, lenRcvBuf); + pMsg->iLenRawMsg = lenRcvBuf; + MsgSetInputName(pMsg, UCHAR_CONSTANT("imudp"), sizeof("imudp")-1); + MsgSetFlowControlType(pMsg, eFLOWCTL_NO_DELAY); + pMsg->msgFlags = NEEDS_PARSING | PARSE_HOSTNAME; + pMsg->bParseHOSTNAME = 1; + MsgSetRcvFrom(pMsg, fromHost); + CHKiRet(MsgSetRcvFromIP(pMsg, fromHostIP)); + CHKiRet(submitMsg(pMsg)); + } + } + + +finalize_it: + RETiRet; +} + + /* This function is called to gather input. + * Note that udpLstnSocks must be non-NULL because otherwise we would not have + * indicated that we want to run (or we have a programming error ;)). -- rgerhards, 2008-10-02 + * rgerhards, 2008-10-07: I have implemented a very simple, yet in most cases probably + * highly efficient "name caching". Before querying a name, I now check if the name to be + * queried is the same as the one queried in the last message processed. If that is the + * case, we can simple re-use the previous value. This algorithm works quite well with + * few sender, especially if they emit messages in bursts. The more sender and the + * more intermixed messages arrive, the less this algorithm works, but the overhead + * is so minimal (a simple memory compare and move) that this does not hurt. Even + * with a real name lookup cache, this optimization here is useful as it is quicker + * than even a cache lookup). */ BEGINrunInput int maxfds; int nfds; int i; fd_set readfds; - struct sockaddr_storage frominet; - socklen_t socklen; + struct sockaddr_storage frominetPrev; + int bIsPermitted; uchar fromHost[NI_MAXHOST]; uchar fromHostIP[NI_MAXHOST]; uchar fromHostFQDN[NI_MAXHOST]; - ssize_t l; CODESTARTrunInput + /* start "name caching" algo by making sure the previous system indicator + * is invalidated. + */ + bIsPermitted = 0; + memset(&frominetPrev, 0, sizeof(frominetPrev)); /* this is an endless loop - it is terminated when the thread is * signalled to do so. This, however, is handled by the framework, * right into the sleep below. @@ -158,17 +282,14 @@ CODESTARTrunInput maxfds = 0; FD_ZERO (&readfds); - /* Add the UDP listen sockets to the list of read descriptors. - */ - if(udpLstnSocks != NULL) { - for (i = 0; i < *udpLstnSocks; i++) { - if (udpLstnSocks[i+1] != -1) { - if(Debug) - net.debugListenInfo(udpLstnSocks[i+1], "UDP"); - FD_SET(udpLstnSocks[i+1], &readfds); - if(udpLstnSocks[i+1]>maxfds) maxfds=udpLstnSocks[i+1]; - } - } + /* Add the UDP listen sockets to the list of read descriptors. */ + for (i = 0; i < *udpLstnSocks; i++) { + if (udpLstnSocks[i+1] != -1) { + if(Debug) + net.debugListenInfo(udpLstnSocks[i+1], "UDP"); + FD_SET(udpLstnSocks[i+1], &readfds); + if(udpLstnSocks[i+1]>maxfds) maxfds=udpLstnSocks[i+1]; + } } if(Debug) { dbgprintf("--------imUDP calling select, active file descriptors (max %d): ", maxfds); @@ -181,53 +302,14 @@ CODESTARTrunInput /* wait for io to become ready */ nfds = select(maxfds+1, (fd_set *) &readfds, NULL, NULL, NULL); - if(udpLstnSocks != NULL) { - for (i = 0; nfds && i < *udpLstnSocks; i++) { - if (FD_ISSET(udpLstnSocks[i+1], &readfds)) { - socklen = sizeof(frominet); - l = recvfrom(udpLstnSocks[i+1], (char*) pRcvBuf, iMaxLine, 0, - (struct sockaddr *)&frominet, &socklen); - if (l > 0) { - if(net.cvthname(&frominet, fromHost, fromHostFQDN, fromHostIP) == RS_RET_OK) { - dbgprintf("Message from inetd socket: #%d, host: %s\n", - udpLstnSocks[i+1], fromHost); - /* Here we check if a host is permitted to send us - * syslog messages. If it isn't, we do not further - * process the message but log a warning (if we are - * configured to do this). - * rgerhards, 2005-09-26 - */ - if(net.isAllowedSender((uchar*) "UDP", - (struct sockaddr *)&frominet, (char*)fromHostFQDN)) { - parseAndSubmitMessage(fromHost, fromHostIP, pRcvBuf, l, - MSG_PARSE_HOSTNAME, NOFLAG, eFLOWCTL_NO_DELAY, (uchar*)"imudp"); - } else { - dbgprintf("%s is not an allowed sender\n", (char*)fromHostFQDN); - if(glbl.GetOption_DisallowWarning) { - time_t tt; - - time(&tt); - if(tt > ttLastDiscard + 60) { - ttLastDiscard = tt; - errmsg.LogError(0, NO_ERRCODE, - "UDP message from disallowed sender %s discarded", - (char*)fromHost); - } - } - } - } - } else if (l < 0 && errno != EINTR && errno != EAGAIN) { - char errStr[1024]; - rs_strerror_r(errno, errStr, sizeof(errStr)); - dbgprintf("INET socket error: %d = %s.\n", errno, errStr); - errmsg.LogError(errno, NO_ERRCODE, "recvfrom inet"); - /* should be harmless */ - sleep(1); - } - --nfds; /* indicate we have processed one */ - } - } - } + for(i = 0; nfds && i < *udpLstnSocks; i++) { + if(FD_ISSET(udpLstnSocks[i+1], &readfds)) { + processSocket(udpLstnSocks[i+1], &frominetPrev, &bIsPermitted, + fromHost, fromHostFQDN, fromHostIP); + --nfds; /* indicate we have processed one descriptor */ + } + } + /* end of a run, back to loop for next recv() */ } return iRet; @@ -272,6 +354,7 @@ CODESTARTmodExit /* release what we no longer need */ objRelease(errmsg, CORE_COMPONENT); objRelease(glbl, CORE_COMPONENT); + objRelease(datetime, CORE_COMPONENT); objRelease(net, LM_NET_FILENAME); ENDmodExit @@ -291,6 +374,7 @@ static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __a net.closeUDPListenSockets(udpLstnSocks); udpLstnSocks = NULL; } + iTimeRequery = TIME_REQUERY_DFLT;/* the default is to query only every second time */ return RS_RET_OK; } @@ -301,6 +385,7 @@ CODESTARTmodInit CODEmodInit_QueryRegCFSLineHdlr CHKiRet(objUse(errmsg, CORE_COMPONENT)); CHKiRet(objUse(glbl, CORE_COMPONENT)); + CHKiRet(objUse(datetime, CORE_COMPONENT)); CHKiRet(objUse(net, LM_NET_FILENAME)); /* register config file handlers */ @@ -308,9 +393,10 @@ CODEmodInit_QueryRegCFSLineHdlr addListner, NULL, STD_LOADABLE_MODULE_ID)); CHKiRet(omsdRegCFSLineHdlr((uchar *)"udpserveraddress", 0, eCmdHdlrGetWord, NULL, &pszBindAddr, STD_LOADABLE_MODULE_ID)); + CHKiRet(omsdRegCFSLineHdlr((uchar *)"udpservertimerequery", 0, eCmdHdlrInt, + NULL, &iTimeRequery, STD_LOADABLE_MODULE_ID)); CHKiRet(omsdRegCFSLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID)); ENDmodInit -/* - * vi:set ai: +/* vim:set ai: */ diff --git a/plugins/imuxsock/imuxsock.c b/plugins/imuxsock/imuxsock.c index 55b8b2df..1d88a2b5 100644 --- a/plugins/imuxsock/imuxsock.c +++ b/plugins/imuxsock/imuxsock.c @@ -42,6 +42,7 @@ #include "errmsg.h" #include "net.h" #include "glbl.h" +#include "msg.h" MODULE_TYPE_INPUT @@ -221,7 +222,8 @@ static rsRetVal readSocket(int fd, int iSock) if (iRcvd > 0) { parseAndSubmitMessage(funixHName[iSock] == NULL ? glbl.GetLocalHostName() : funixHName[iSock], (uchar*)"127.0.0.1", pRcv, - iRcvd, funixParseHost[iSock], funixFlags[iSock], funixFlowCtl[iSock], (uchar*)"imuxsock"); + iRcvd, funixParseHost[iSock] ? (funixFlags[iSock] | PARSE_HOSTNAME) : funixFlags[iSock], + funixFlowCtl[iSock], (uchar*)"imuxsock", NULL, 0); } else if (iRcvd < 0 && errno != EINTR) { char errStr[1024]; rs_strerror_r(errno, errStr, sizeof(errStr)); diff --git a/plugins/omgssapi/omgssapi.c b/plugins/omgssapi/omgssapi.c index e0cc8af6..361f657f 100644 --- a/plugins/omgssapi/omgssapi.c +++ b/plugins/omgssapi/omgssapi.c @@ -444,7 +444,7 @@ CODESTARTdoAction /* error! */ dbgprintf("error forwarding via tcp, suspending\n"); pData->eDestState = eDestFORW_SUSP; - iRet = RS_RET_SUSPENDED; + ABORT_FINALIZE(RS_RET_SUSPENDED); } break; } diff --git a/plugins/omoracle/Makefile.am b/plugins/omoracle/Makefile.am new file mode 100644 index 00000000..11257fb2 --- /dev/null +++ b/plugins/omoracle/Makefile.am @@ -0,0 +1,8 @@ +pkglib_LTLIBRARIES = omoracle.la + +omoracle_la_SOURCES = omoracle.c omoracle.h +omoracle_la_CPPFLAGS = $(RSRT_CFLAGS) $(PTHREADS_CFLAGS) $(ORACLE_CFLAGS) +omoracle_la_LDFLAGS = -module -avoid-version +omoracle_la_LIBADD = $(ORACLE_LIBS) + +#EXTRA_DIST = diff --git a/plugins/omoracle/omoracle.c b/plugins/omoracle/omoracle.c new file mode 100644 index 00000000..331b7dd4 --- /dev/null +++ b/plugins/omoracle/omoracle.c @@ -0,0 +1,572 @@ +/** omoracle.c + + This is an output module feeding directly to an Oracle + database. It uses Oracle Call Interface, a propietary module + provided by Oracle. + + Selector lines to be used are of this form: + + :omoracle:;TemplateName + + The module gets its configuration via rsyslog $... directives, + namely: + + $OmoracleDBUser: user name to log in on the database. + + $OmoracleDBPassword: password to log in on the database. + + $OmoracleDB: connection string (an Oracle easy connect or a db + name as specified by tnsnames.ora) + + $OmoracleBatchSize: Number of elements to send to the DB on each + transaction. + + $OmoracleBatchItemSize: Number of characters each property may + have. Make it as big as the longest value you expect for *any* + property in the sentence. For instance, if you expect 5 arguments + to the statement, 4 have 10 bytes and the 5th may be up to 3KB, + then specify $OmoracleBatchItemSize 3072. Please, remember to + leave space to the trailing \0!! + + $OmoracleStatementTemplate: Name of the template containing the + statement to be prepared and executed in batches. Please note that + Oracle's prepared statements have their placeholders as + ':identifier', and this module uses the colon to guess how many + placeholders there will be. + + All these directives are mandatory. The dbstring can be an Oracle + easystring or a DB name, as present in the tnsnames.ora file. + + The form of the template is just a list of strings you want + inserted to the DB, for instance: + + $template TestStmt,"%hostname%%msg%" + + Will provide the arguments to a statement like + + $OmoracleStatement \ + insert into foo(hostname,message)values(:host,:message) + + Also note that identifiers to placeholders are arbitrarry. You + need to define the properties on the template in the correct order + you want them passed to the statement! + + This file is licensed under the terms of the GPL version 3 or, at + your choice, any later version. Exceptionally (perhaps), you are + allowed to link to the Oracle Call Interface in your derived work + + Author: Luis Fernando Muñoz MejÃas + <Luis.Fernando.Munoz.Mejias@cern.ch> + + This file is part of rsyslog. +*/ +#include "config.h" +#include "rsyslog.h" +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <oci.h> +#include <errno.h> +#include <stdarg.h> +#include <signal.h> +#include <time.h> +#include <assert.h> +#include <ctype.h> +#include "dirty.h" +#include "syslogd-types.h" +#include "srUtils.h" +#include "template.h" +#include "module-template.h" +#include "errmsg.h" +#include "cfsysline.h" +#include "omoracle.h" + +MODULE_TYPE_OUTPUT + +/** */ +DEF_OMOD_STATIC_DATA +DEFobjCurrIf(errmsg) + +/** */ +struct oracle_batch +{ + /* Batch size */ + int size; + /* Last element inserted in the buffer. The batch will be + * executed when n == size */ + int n; + /* Number of arguments the statement takes */ + int arguments; + /** Maximum size of each parameter */ + int param_size; + /* Parameters to pass to the statement on this transaction */ + char*** parameters; + /* Binding parameters */ + OCIBind** bindings; +}; + +typedef struct _instanceData { + /* Environment handler, the base for any OCI work. */ + OCIEnv* environment; + /* Session handler, the actual DB connection object. */ + OCISession* session; + /* Error handler for OCI calls. */ + OCIError* error; + /* Prepared statement. */ + OCIStmt* statement; + /* Service handler. */ + OCISvcCtx* service; + /* Credentials object for the connection. */ + OCIAuthInfo* authinfo; + /* Connection string, kept here for possible retries. */ + char* connection; + /* Statement to be prepared. */ + char* txt_statement; + /* Batch */ + struct oracle_batch batch; +} instanceData; + +/** Database name, to be filled by the $OmoracleDB directive */ +static char* db_name; +/** Database user name, to be filled by the $OmoracleDBUser + * directive */ +static char* db_user; +/** Database password, to be filled by the $OmoracleDBPassword */ +static char* db_password; +/** Batch size. */ +static int batch_size; +/** Size of each element in the batch. */ +static int batch_item_size; +/** Statement to prepare and execute */ +static char* db_statement; + +/** Generic function for handling errors from OCI. + + It will be called only inside CHECKERR and CHECKENV macros. + + Arguments: handle The error or environment handle to check. + htype: OCI_HTYPE_* constant, usually OCI_HTYPE_ERROR or + OCI_HTYPE_ENV + status: status code to check, usually the return value of an OCI + function. + + Returns OCI_SUCCESS on success, OCI_ERROR otherwise. +*/ +static int oci_errors(void* handle, ub4 htype, sword status) +{ + sb4 errcode; + unsigned char buf[MAX_BUFSIZE]; + + switch (status) { + case OCI_SUCCESS: + return OCI_SUCCESS; + break; + case OCI_SUCCESS_WITH_INFO: + errmsg.LogError(0, NO_ERRCODE, "OCI SUCCESS - With info\n"); + break; + case OCI_NEED_DATA: + errmsg.LogError(0, NO_ERRCODE, "OCI NEEDS MORE DATA\n"); + break; + case OCI_ERROR: + dbgprintf ("OCI GENERAL ERROR\n"); + if (handle) { + OCIErrorGet(handle, 1, NULL, &errcode, buf, + sizeof buf, htype); + errmsg.LogError(0, NO_ERRCODE, "Error message: %s", buf); + } else + errmsg.LogError(0, NO_ERRCODE, "NULL handle\n" + "Unable to extract further " + "information"); + break; + case OCI_INVALID_HANDLE: + errmsg.LogError(0, NO_ERRCODE, "OCI INVALID HANDLE\n"); + break; + case OCI_STILL_EXECUTING: + errmsg.LogError(0, NO_ERRCODE, "Still executing...\n"); + break; + case OCI_CONTINUE: + errmsg.LogError(0, NO_ERRCODE, "OCI CONTINUE\n"); + break; + } + return OCI_ERROR; +} + +/** Callback for OCIBindDynamic. + * + * OCI doesn't insert an array of char* by itself (although it can + * handle arrays of int), so we must either run in batches of size one + * (no way) or bind all parameters with OCI_DATA_AT_EXEC instead of + * OCI_DEFAULT, and then give this function as an argument to + * OCIBindDynamic so that it is able to handle all strings in a single + * server trip. + * + * See the documentation of OCIBindDynamic + * (http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28395/oci16rel003.htm#i444015) + * for more details. + */ +static int bind_dynamic (char** in, OCIBind __attribute__((unused))* bind, + int iter, int __attribute__((unused)) idx, + char** out, int* buflen, unsigned char* piece, + void** bd) +{ + *out = in[iter]; + *buflen = strlen(*out) + 1; + dbgprintf ("omoracle bound line %d, length %d: %s\n", iter, *buflen, + *out); + *piece = OCI_ONE_PIECE; + *bd = NULL; + return OCI_CONTINUE; +} + + +/** Returns the number of bind parameters for the statement given as + * an argument. It counts the number of appearances of ':', as in + * + * insert into foo(bar, baz) values(:bar, :baz) + * + * while taking in account that string literals must not be parsed. */ +static int count_bind_parameters(char* p) +{ + int n = 0; + int enable = 1; + + for (; *p; p++) + if (enable && *p == BIND_MARK ) + n++; + else if (*p == '\'') + enable ^= 1; + dbgprintf ("omoracle statement has %d parameters\n", n); + return n; +} + +/** Prepares the statement, binding all its positional parameters */ +static int prepare_statement(instanceData* pData) +{ + int i; + DEFiRet; + + CHECKERR(pData->error, + OCIStmtPrepare(pData->statement, + pData->error, + pData->txt_statement, + strlen(pData->txt_statement), + OCI_NTV_SYNTAX, OCI_DEFAULT)); + for (i = 0; i < pData->batch.arguments; i++) { + CHECKERR(pData->error, + OCIBindByPos(pData->statement, + pData->batch.bindings+i, + pData->error, i+1, NULL, + pData->batch.param_size, + SQLT_STR, NULL, NULL, NULL, + 0, 0, OCI_DATA_AT_EXEC)); + CHECKERR(pData->error, + OCIBindDynamic(pData->batch.bindings[i], + pData->error, + pData->batch.parameters[i], + bind_dynamic, NULL, NULL)); + } + +finalize_it: + RETiRet; +} + + +/* Resource allocation */ +BEGINcreateInstance + int i, j; + struct template* tpl; +CODESTARTcreateInstance + + ASSERT(pData != NULL); + + CHECKENV(pData->environment, + OCIEnvCreate((void*) &(pData->environment), OCI_DEFAULT, + NULL, NULL, NULL, NULL, 0, NULL)); + CHECKENV(pData->environment, + OCIHandleAlloc(pData->environment, (void*) &(pData->error), + OCI_HTYPE_ERROR, 0, NULL)); + CHECKENV(pData->environment, + OCIHandleAlloc(pData->environment, (void*) &(pData->authinfo), + OCI_HTYPE_AUTHINFO, 0, NULL)); + CHECKENV(pData->environment, + OCIHandleAlloc(pData->environment, (void*) &(pData->statement), + OCI_HTYPE_STMT, 0, NULL)); + tpl = tplFind(db_statement, strlen(db_statement)); + pData->txt_statement = strdup(tpl->pEntryRoot->data.constant.pConstant); + CHKmalloc(pData->txt_statement); + dbgprintf("omoracle will run stored statement: %s\n", + pData->txt_statement); + + pData->batch.n = 0; + pData->batch.size = batch_size; + pData->batch.param_size = batch_item_size * + sizeof ***pData->batch.parameters; + pData->batch.arguments = count_bind_parameters(pData->txt_statement); + + /* I know, this can be done with a single malloc() call but this is + * easier to read. :) */ + pData->batch.parameters = calloc(pData->batch.arguments, + sizeof *pData->batch.parameters); + CHKmalloc(pData->batch.parameters); + for (i = 0; i < pData->batch.arguments; i++) { + pData->batch.parameters[i] = calloc(pData->batch.size, + sizeof **pData->batch.parameters); + CHKmalloc(pData->batch.parameters[i]); + for (j = 0; j < pData->batch.size; j++) { + /* Each entry has at most + * pData->batch.param_size bytes because OCI + * doesn't like null-terminated strings when + * operating with batches, and the maximum + * size of each entry must be provided when + * binding parameters. pData->batch.param_size + * is long enough for usual entries. */ + pData->batch.parameters[i][j] = malloc(pData->batch.param_size); + CHKmalloc(pData->batch.parameters[i][j]); + } + } + + pData->batch.bindings = calloc(pData->batch.arguments, + sizeof *pData->batch.bindings); + CHKmalloc(pData->batch.bindings); + +finalize_it: +ENDcreateInstance + +/* Inserts all stored statements into the database, releasing any + * allocated memory. */ +static int insert_to_db(instanceData* pData) +{ + DEFiRet; + + CHECKERR(pData->error, + OCIStmtExecute(pData->service, + pData->statement, + pData->error, + pData->batch.n, 0, NULL, NULL, + OCI_BATCH_ERRORS)); + +finalize_it: + pData->batch.n = 0; + OCITransCommit(pData->service, pData->error, 0); + dbgprintf ("omoracle insertion to DB %s\n", iRet == RS_RET_OK ? + "succeeded" : "did not succeed"); + RETiRet; +} + +/** Close the session and free anything allocated by + createInstance. */ +BEGINfreeInstance + int i, j; +CODESTARTfreeInstance + +/* Before actually releasing our resources, let's try to commit + * anything pending so that we don't lose any messages. */ + insert_to_db(pData); + OCISessionRelease(pData->service, pData->error, NULL, 0, OCI_DEFAULT); + OCIHandleFree(pData->environment, OCI_HTYPE_ENV); + OCIHandleFree(pData->error, OCI_HTYPE_ERROR); + OCIHandleFree(pData->service, OCI_HTYPE_SVCCTX); + OCIHandleFree(pData->authinfo, OCI_HTYPE_AUTHINFO); + OCIHandleFree(pData->statement, OCI_HTYPE_STMT); + free(pData->connection); + free(pData->txt_statement); + for (i = 0; i < pData->batch.arguments; i++) { + for (j = 0; j < pData->batch.size; j++) + free(pData->batch.parameters[i][j]); + free(pData->batch.parameters[i]); + } + free(pData->batch.parameters); + free(pData->batch.bindings); + dbgprintf ("omoracle freed all its resources\n"); + +ENDfreeInstance + +BEGINtryResume +CODESTARTtryResume + /* Here usually only a reconnect is done. The rsyslog core will call + * this entry point from time to time when the action suspended itself. + * Note that the rsyslog core expects that if the plugin suspended itself + * the action was not carried out during that invocation. Thus, rsyslog + * will call the action with *the same* data item again AFTER a resume + * was successful. As such, tryResume should NOT write the failed data + * item. If it needs to for some reason, it must delete the item again, + * otherwise, it will get duplicated. + * This handling inside the rsyslog core is important to be able to + * preserve data over rsyslog restarts. With it, the core can ensure that + * it queues all not-yet-processed messages without the plugin needing + * to take care about that. + * So in essence, it is recommended that just a reconnet is tried, but + * the last action not restarted. Note that it is not a real problem + * (but causes a slight performance degradation) if tryResume returns + * successfully but the next call to doAction() immediately returns + * RS_RET_SUSPENDED. So it is OK to do the actual restart inside doAction(). + * ... of course I don't know why Oracle might need a full restart... + * rgerhards, 2009-03-26 + */ + dbgprintf("omoracle attempting to reconnect to DB server\n"); + OCISessionRelease(pData->service, pData->error, NULL, 0, OCI_DEFAULT); + OCIHandleFree(pData->service, OCI_HTYPE_SVCCTX); + CHECKERR(pData->error, OCISessionGet(pData->environment, pData->error, + &pData->service, pData->authinfo, + pData->connection, + strlen(pData->connection), NULL, 0, + NULL, NULL, NULL, OCI_DEFAULT)); + CHKiRet(prepare_statement(pData)); + +finalize_it: +ENDtryResume + +static rsRetVal startSession(instanceData* pData, char* connection, char* user, + char * password) +{ + DEFiRet; + CHECKERR(pData->error, + OCIAttrSet(pData->authinfo, OCI_HTYPE_AUTHINFO, user, + strlen(user), OCI_ATTR_USERNAME, pData->error)); + CHECKERR(pData->error, + OCIAttrSet(pData->authinfo, OCI_HTYPE_AUTHINFO, password, + strlen(password), OCI_ATTR_PASSWORD, pData->error)); + CHECKERR(pData->error, + OCISessionGet(pData->environment, pData->error, + &pData->service, pData->authinfo, connection, + strlen(connection), NULL, 0, NULL, NULL, NULL, + OCI_DEFAULT)); +finalize_it: + if (iRet != RS_RET_OK) + errmsg.LogError(0, NO_ERRCODE, + "Unable to start Oracle session\n"); + RETiRet; +} + + +BEGINisCompatibleWithFeature +CODESTARTisCompatibleWithFeature + /* Right now, this module is compatible with nothing. */ + iRet = RS_RET_INCOMPATIBLE; +ENDisCompatibleWithFeature + +BEGINparseSelectorAct +CODESTARTparseSelectorAct +CODE_STD_STRING_REQUESTparseSelectorAct(1); + + if (strncmp((char*) p, ":omoracle:", sizeof ":omoracle:" - 1)) { + ABORT_FINALIZE(RS_RET_CONFLINE_UNPROCESSED); + } + + p += sizeof ":omoracle:" - 1; + + if (*p == '\0' || *p == ',') { + errmsg.LogError(0, NO_ERRCODE, + "Wrong char processing module arguments: %c\n", + *p); + ABORT_FINALIZE(RS_RET_INVALID_PARAMS); + } + + CHKiRet(cflineParseTemplateName(&p, *ppOMSR, 0, + OMSR_TPL_AS_ARRAY, " StdFmt")); + CHKiRet(createInstance(&pData)); + CHKmalloc(pData->connection = strdup(db_name)); + CHKiRet(startSession(pData, db_name, db_user, db_password)); + + CHKiRet(prepare_statement(pData)); + + dbgprintf ("omoracle module got all its resources allocated " + "and connected to the DB\n"); + +CODE_STD_FINALIZERparseSelectorAct +ENDparseSelectorAct + +BEGINdoAction + int i; + char **params = (char**) ppString[0]; +CODESTARTdoAction + + if (pData->batch.n == pData->batch.size) { + dbgprintf("omoracle batch size limit hit, sending into DB\n"); + CHKiRet(insert_to_db(pData)); + } + + for (i = 0; i < pData->batch.arguments && params[i]; i++) { + dbgprintf("batch[%d][%d]=%s\n", i, pData->batch.n, params[i]); + strncpy(pData->batch.parameters[i][pData->batch.n], params[i], + pData->batch.param_size); + CHKmalloc(pData->batch.parameters[i][pData->batch.n]); + } + pData->batch.n++; + +finalize_it: +ENDdoAction + +BEGINmodExit +CODESTARTmodExit +ENDmodExit + +BEGINdbgPrintInstInfo +CODESTARTdbgPrintInstInfo +ENDdbgPrintInstInfo + + +BEGINqueryEtryPt +CODESTARTqueryEtryPt +CODEqueryEtryPt_STD_OMOD_QUERIES +ENDqueryEtryPt + +static rsRetVal +resetConfigVariables(uchar __attribute__((unused)) *pp, + void __attribute__((unused)) *pVal) +{ + int n; + DEFiRet; + if(db_user != NULL) + free(db_user); + if(db_name != NULL) + free(db_name); + if (db_password != NULL) { + n = strlen(db_password); + memset(db_password, 0, n); + free(db_password); + } + if (db_statement != NULL) + free(db_statement); + db_name = db_user = db_password = db_statement = NULL; + batch_size = batch_item_size = 0; + RETiRet; +} + +BEGINmodInit() + rsRetVal (*supported_options)(unsigned long *pOpts); + unsigned long opts; +CODESTARTmodInit + *ipIFVersProvided = CURR_MOD_IF_VERSION; +CODEmodInit_QueryRegCFSLineHdlr + CHKiRet(objUse(errmsg, CORE_COMPONENT)); + CHKiRet(omsdRegCFSLineHdlr((uchar*) "resetconfigvariables", 1, + eCmdHdlrCustomHandler, resetConfigVariables, + NULL, STD_LOADABLE_MODULE_ID)); + + CHKiRet(omsdRegCFSLineHdlr((uchar*) "omoracledbuser", 0, + eCmdHdlrGetWord, NULL, &db_user, + STD_LOADABLE_MODULE_ID)); + CHKiRet(omsdRegCFSLineHdlr((uchar*) "omoracledbpassword", 0, + eCmdHdlrGetWord, NULL, &db_password, + STD_LOADABLE_MODULE_ID)); + CHKiRet(omsdRegCFSLineHdlr((uchar*) "omoracledb", 0, + eCmdHdlrGetWord, NULL, &db_name, + STD_LOADABLE_MODULE_ID)); + CHKiRet(omsdRegCFSLineHdlr((uchar*) "omoraclebatchsize", 0, + eCmdHdlrInt, NULL, &batch_size, + STD_LOADABLE_MODULE_ID)); + CHKiRet(pHostQueryEtryPt((uchar*)"OMSRgetSupportedTplOpts", &supported_options)); + CHKiRet((*supported_options)(&opts)); + if (!(opts & OMSR_TPL_AS_ARRAY)) + ABORT_FINALIZE(RS_RET_RSCORE_TOO_OLD); + + CHKiRet(omsdRegCFSLineHdlr((uchar*) "omoraclestatementtemplate", 0, + eCmdHdlrGetWord, NULL, + &db_statement, STD_LOADABLE_MODULE_ID)); + + CHKiRet(omsdRegCFSLineHdlr((uchar*) "omoraclebatchitemsize", 0, + eCmdHdlrInt, NULL, + &batch_item_size, STD_LOADABLE_MODULE_ID)); + +ENDmodInit diff --git a/plugins/omoracle/omoracle.h b/plugins/omoracle/omoracle.h new file mode 100644 index 00000000..0ff879b3 --- /dev/null +++ b/plugins/omoracle/omoracle.h @@ -0,0 +1,31 @@ +/** Definitions for the Oracle output module. + + This module needs OCI to be installed (on Red Hat-like systems + this is usually the oracle-instantclient-devel RPM). + + This file is part of rsyslog. + + This file is licensed under the terms of the GPL version 3 or, at + your choice, any later version. Exceptionally (perhaps), you are + allowed to link to the Oracle Call Interface in your derived work + + Author: Luis Fernando Muñoz MejÃas <Luis.Fernando.Munoz.Mejias@cern.ch> +*/ +#ifndef __OMORACLEH__ +#define __OMORACLEH__ + +/** Macros to make error handling easier. */ + +/** Checks for errors on the OCI handling. */ +#define CHECKERR(handle,status) CHKiRet(oci_errors((handle), \ + OCI_HTYPE_ERROR, (status))) + +/** Checks for errors when handling the environment of OCI. */ +#define CHECKENV(handle,status) CHKiRet(oci_errors((handle), \ + OCI_HTYPE_ENV, (status))) + +enum { MAX_BUFSIZE = 2048 }; + +#define BIND_MARK ':' + +#endif diff --git a/plugins/omoracle/omoracle.te b/plugins/omoracle/omoracle.te new file mode 100644 index 00000000..81eb6cf1 --- /dev/null +++ b/plugins/omoracle/omoracle.te @@ -0,0 +1,13 @@ + +module omoracle 1.0; + +require { + type syslogd_t; + type port_t; + class process { execstack execmem }; + class tcp_socket name_connect; +} + +#============= syslogd_t ============== +allow syslogd_t port_t:tcp_socket name_connect; +allow syslogd_t self:process { execstack execmem }; diff --git a/plugins/omprog/Makefile.am b/plugins/omprog/Makefile.am new file mode 100644 index 00000000..63fe09b8 --- /dev/null +++ b/plugins/omprog/Makefile.am @@ -0,0 +1,8 @@ +pkglib_LTLIBRARIES = omprog.la + +omprog_la_SOURCES = omprog.c +omprog_la_CPPFLAGS = $(RSRT_CFLAGS) $(PTHREADS_CFLAGS) +omprog_la_LDFLAGS = -module -avoid-version +omprog_la_LIBADD = + +EXTRA_DIST = diff --git a/plugins/omprog/omprog.c b/plugins/omprog/omprog.c new file mode 100644 index 00000000..2a078a6d --- /dev/null +++ b/plugins/omprog/omprog.c @@ -0,0 +1,357 @@ +/* omprog.c + * This output plugin enables rsyslog to execute a program and + * feed it the message stream as standard input. + * + * NOTE: read comments in module-template.h for more specifics! + * + * File begun on 2009-04-01 by RGerhards + * + * Copyright 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ +#include "config.h" +#include "rsyslog.h" +#include <stdio.h> +#include <stdarg.h> +#include <stdlib.h> +#include <string.h> +#include <assert.h> +#include <signal.h> +#include <errno.h> +#include <unistd.h> +#include <wait.h> +#include "dirty.h" +#include "syslogd-types.h" +#include "srUtils.h" +#include "template.h" +#include "module-template.h" +#include "errmsg.h" +#include "cfsysline.h" + +MODULE_TYPE_OUTPUT + +/* internal structures + */ +DEF_OMOD_STATIC_DATA +DEFobjCurrIf(errmsg) + +typedef struct _instanceData { + uchar *szBinary; /* name of binary to call */ + pid_t pid; /* pid of currently running process */ + int fdPipe; /* file descriptor to write to */ + int bIsRunning; /* is binary currently running? 0-no, 1-yes */ +} instanceData; + +/* config settings */ +static uchar *szBinary = NULL; /* name of binary to call */ + +BEGINcreateInstance +CODESTARTcreateInstance +ENDcreateInstance + + +BEGINisCompatibleWithFeature +CODESTARTisCompatibleWithFeature + if(eFeat == sFEATURERepeatedMsgReduction) + iRet = RS_RET_OK; +ENDisCompatibleWithFeature + + +BEGINfreeInstance +CODESTARTfreeInstance + if(pData->szBinary != NULL) + free(pData->szBinary); +ENDfreeInstance + + +BEGINdbgPrintInstInfo +CODESTARTdbgPrintInstInfo +ENDdbgPrintInstInfo + + +BEGINtryResume +CODESTARTtryResume +ENDtryResume + + +/* execute the child process (must be called in child context + * after fork). + */ + +static void execBinary(instanceData *pData, int fdStdin) +{ + int i; + struct sigaction sigAct; + char *newargv[] = { NULL }; + char *newenviron[] = { NULL }; + + assert(pData != NULL); + + fclose(stdin); + dup(fdStdin); + //fclose(stdout); + + /* we close all file handles as we fork soon + * Is there a better way to do this? - mail me! rgerhards@adiscon.com + */ +# ifndef VALGRIND /* we can not use this with valgrind - too many errors... */ + for(i = 3 ; i <= 65535 ; ++i) + close(i); +# endif + + /* reset signal handlers to default */ + memset(&sigAct, 0, sizeof(sigAct)); + sigfillset(&sigAct.sa_mask); + sigAct.sa_handler = SIG_DFL; + for(i = 1 ; i < NSIG ; ++i) + sigaction(i, &sigAct, NULL); + + alarm(0); + + /* finally exec child */ + execve((char*)pData->szBinary, newargv, newenviron); + /* switch to? + execlp((char*)program, (char*) program, (char*)arg, NULL); + */ + + /* we should never reach this point, but if we do, we terminate */ + exit(1); +} + + +/* creates a pipe and starts program, uses pipe as stdin for program. + * rgerhards, 2009-04-01 + */ +static rsRetVal +openPipe(instanceData *pData) +{ + int pipefd[2]; + pid_t cpid; + DEFiRet; + + assert(pData != NULL); + + if(pipe(pipefd) == -1) { + ABORT_FINALIZE(RS_RET_ERR_CREAT_PIPE); + } + + DBGPRINTF("executing program '%s'\n", pData->szBinary); + + /* NO OUTPUT AFTER FORK! */ + + cpid = fork(); + if(cpid == -1) { + ABORT_FINALIZE(RS_RET_ERR_FORK); + } + + if(cpid == 0) { + /* we are now the child, just set the right selectors and + * exec the binary. If that fails, there is not much we can do. + */ + close(pipefd[1]); + execBinary(pData, pipefd[0]); + /*NO CODE HERE - WILL NEVER BE REACHED!*/ + } + + DBGPRINTF("child has pid %d\n", cpid); + pData->fdPipe = pipefd[1]; + pData->pid = cpid; + close(pipefd[0]); + pData->bIsRunning = 1; +finalize_it: + RETiRet; +} + + +/* clean up after a terminated child + */ +static inline rsRetVal +cleanup(instanceData *pData) +{ + int status; + int ret; + char errStr[1024]; + DEFiRet; + + assert(pData != NULL); + assert(pData->bIsRunning == 1); +RUNLOG_VAR("%d", pData->pid); + ret = waitpid(pData->pid, &status, 0); + if(ret != pData->pid) { + /* if waitpid() fails, we can not do much - try to ignore it... */ + DBGPRINTF("waitpid() returned state %d[%s], future malfunction may happen\n", ret, + rs_strerror_r(errno, errStr, sizeof(errStr))); + } else { + /* check if we should print out some diagnostic information */ + DBGPRINTF("waitpid status return for program '%s': %2.2x\n", + pData->szBinary, status); + if(WIFEXITED(status)) { + errmsg.LogError(0, NO_ERRCODE, "program '%s' exited normally, state %d", + pData->szBinary, WEXITSTATUS(status)); + } else if(WIFSIGNALED(status)) { + errmsg.LogError(0, NO_ERRCODE, "program '%s' terminated by signal %d.", + pData->szBinary, WTERMSIG(status)); + } + } + + pData->bIsRunning = 0; + RETiRet; +} + + +/* try to restart the binary when it has stopped. + */ +static inline rsRetVal +tryRestart(instanceData *pData) +{ + DEFiRet; + assert(pData != NULL); + assert(pData->bIsRunning == 0); + + iRet = openPipe(pData); + RETiRet; +} + + +/* write to pipe + * note that we do not try to run block-free. If the users fears something + * may block (and this not be acceptable), the action should be run on its + * own action queue. + */ +static rsRetVal +writePipe(instanceData *pData, uchar *szMsg) +{ + int lenWritten; + int lenWrite; + int writeOffset; + char errStr[1024]; + DEFiRet; + + assert(pData != NULL); + + lenWrite = strlen((char*)szMsg); + writeOffset = 0; + + do + { + lenWritten = write(pData->fdPipe, ((char*)szMsg)+writeOffset, lenWrite); + if(lenWritten == -1) { + switch(errno) { + case EPIPE: + DBGPRINTF("Program '%s' terminated, trying to restart\n", + pData->szBinary); + CHKiRet(cleanup(pData)); + CHKiRet(tryRestart(pData)); + break; + default: + DBGPRINTF("error %d writing to pipe: %s\n", errno, + rs_strerror_r(errno, errStr, sizeof(errStr))); + ABORT_FINALIZE(RS_RET_ERR_WRITE_PIPE); + break; + } + } else { + writeOffset += lenWritten; + } + } while(lenWritten != lenWrite); + + +finalize_it: + RETiRet; +} + + +BEGINdoAction +CODESTARTdoAction + if(pData->bIsRunning == 0) { + openPipe(pData); + } + + iRet = writePipe(pData, ppString[0]); + + if(iRet != RS_RET_OK) + iRet = RS_RET_SUSPENDED; +ENDdoAction + + +BEGINparseSelectorAct +CODESTARTparseSelectorAct +CODE_STD_STRING_REQUESTparseSelectorAct(1) + /* first check if this config line is actually for us */ + if(strncmp((char*) p, ":omprog:", sizeof(":omprog:") - 1)) { + ABORT_FINALIZE(RS_RET_CONFLINE_UNPROCESSED); + } + + /* ok, if we reach this point, we have something for us */ + p += sizeof(":omprog:") - 1; /* eat indicator sequence (-1 because of '\0'!) */ + CHKiRet(createInstance(&pData)); + + CHKmalloc(pData->szBinary = (uchar*) strdup((char*)szBinary)); + /* check if a non-standard template is to be applied */ + if(*(p-1) == ';') + --p; + CHKiRet(cflineParseTemplateName(&p, *ppOMSR, 0, 0, (uchar*) "RSYSLOG_FileFormat")); +CODE_STD_FINALIZERparseSelectorAct +ENDparseSelectorAct + + +BEGINmodExit +CODESTARTmodExit + if(szBinary != NULL) { + free(szBinary); + szBinary = NULL; + } + CHKiRet(objRelease(errmsg, CORE_COMPONENT)); +finalize_it: +ENDmodExit + + +BEGINqueryEtryPt +CODESTARTqueryEtryPt +CODEqueryEtryPt_STD_OMOD_QUERIES +ENDqueryEtryPt + + + +/* Reset config variables for this module to default values. + */ +static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal) +{ + DEFiRet; + + if(szBinary != NULL) { + free(szBinary); + szBinary = NULL; + } + + RETiRet; +} + + +BEGINmodInit() +CODESTARTmodInit + *ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */ +CODEmodInit_QueryRegCFSLineHdlr + CHKiRet(objUse(errmsg, CORE_COMPONENT)); + CHKiRet(omsdRegCFSLineHdlr((uchar *)"actionomprogbinary", 0, eCmdHdlrGetWord, NULL, &szBinary, STD_LOADABLE_MODULE_ID)); + CHKiRet(omsdRegCFSLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID)); +CODEmodInit_QueryRegCFSLineHdlr +ENDmodInit + +/* vi:set ai: + */ diff --git a/plugins/omstdout/Makefile.am b/plugins/omstdout/Makefile.am new file mode 100644 index 00000000..9f5d497f --- /dev/null +++ b/plugins/omstdout/Makefile.am @@ -0,0 +1,8 @@ +pkglib_LTLIBRARIES = omstdout.la + +omstdout_la_SOURCES = omstdout.c +omstdout_la_CPPFLAGS = $(RSRT_CFLAGS) $(PTHREADS_CFLAGS) +omstdout_la_LDFLAGS = -module -avoid-version +omstdout_la_LIBADD = + +EXTRA_DIST = diff --git a/plugins/omstdout/omstdout.c b/plugins/omstdout/omstdout.c new file mode 100644 index 00000000..181895a4 --- /dev/null +++ b/plugins/omstdout/omstdout.c @@ -0,0 +1,203 @@ +/* omstdout.c + * send all output to stdout - this is primarily a test driver (but may + * be used for weired use cases). Not tested for robustness! + * + * NOTE: read comments in module-template.h for more specifics! + * + * File begun on 2009-03-19 by RGerhards + * + * Copyright 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ +#include "config.h" +#include "rsyslog.h" +#include <stdio.h> +#include <stdarg.h> +#include <stdlib.h> +#include <string.h> +#include <assert.h> +#include <signal.h> +#include <errno.h> +#include <unistd.h> +#include "dirty.h" +#include "syslogd-types.h" +#include "srUtils.h" +#include "template.h" +#include "module-template.h" +#include "errmsg.h" +#include "cfsysline.h" + +MODULE_TYPE_OUTPUT + +/* internal structures + */ +DEF_OMOD_STATIC_DATA + +/* config variables */ +static int bUseArrayInterface; /* shall action use array instead of string template interface? */ + + +typedef struct _instanceData { + int bUseArrayInterface; /* uses action use array instead of string template interface? */ +} instanceData; + +BEGINcreateInstance +CODESTARTcreateInstance +ENDcreateInstance + + +BEGINisCompatibleWithFeature +CODESTARTisCompatibleWithFeature + if(eFeat == sFEATURERepeatedMsgReduction) + iRet = RS_RET_OK; +ENDisCompatibleWithFeature + + +BEGINfreeInstance +CODESTARTfreeInstance +ENDfreeInstance + + +BEGINdbgPrintInstInfo +CODESTARTdbgPrintInstInfo +ENDdbgPrintInstInfo + + +BEGINtryResume +CODESTARTtryResume +ENDtryResume + +BEGINdoAction + char **szParams; + char *toWrite; + int iParamVal; + int iParam; + int iBuf; + char szBuf[65564]; +CODESTARTdoAction + if(pData->bUseArrayInterface) { + /* if we use array passing, we need to put together a string + * ourselves. At this point, please keep in mind that omstdout is + * primarily a testing aid. Other modules may do different processing + * if they would like to support downlevel versions which do not support + * array-passing, but also use that interface on cores who do... + * So this code here is also more or less an example of how to do that. + * rgerhards, 2009-04-03 + */ + szParams = (char**) (ppString[0]); + /* In array-passing mode, ppString[] contains a NULL-terminated array + * of char *pointers. + */ + iParam = 0; + iBuf = 0; + while(szParams[iParam] != NULL) { + if(iParam > 0) + szBuf[iBuf++] = ','; /* all but first need a delimiter */ + iParamVal = 0; + while(szParams[iParam][iParamVal] != '\0' && iBuf < (int) sizeof(szBuf)) { + szBuf[iBuf++] = szParams[iParam][iParamVal++]; + } + ++iParam; + } + szBuf[iBuf] = '\0'; + toWrite = szBuf; + } else { + toWrite = (char*) ppString[0]; + } + write(1, toWrite, strlen(toWrite)); /* 1 is stdout! */ +ENDdoAction + + +BEGINparseSelectorAct + int iTplOpts; +CODESTARTparseSelectorAct +CODE_STD_STRING_REQUESTparseSelectorAct(1) + /* first check if this config line is actually for us */ + if(strncmp((char*) p, ":omstdout:", sizeof(":omstdout:") - 1)) { + ABORT_FINALIZE(RS_RET_CONFLINE_UNPROCESSED); + } + + /* ok, if we reach this point, we have something for us */ + p += sizeof(":omstdout:") - 1; /* eat indicator sequence (-1 because of '\0'!) */ + CHKiRet(createInstance(&pData)); + + /* check if a non-standard template is to be applied */ + if(*(p-1) == ';') + --p; + iTplOpts = (bUseArrayInterface == 0) ? 0 : OMSR_TPL_AS_ARRAY; + CHKiRet(cflineParseTemplateName(&p, *ppOMSR, 0, iTplOpts, (uchar*) "RSYSLOG_FileFormat")); + pData->bUseArrayInterface = bUseArrayInterface; +CODE_STD_FINALIZERparseSelectorAct +ENDparseSelectorAct + + +BEGINmodExit +CODESTARTmodExit +ENDmodExit + + +BEGINqueryEtryPt +CODESTARTqueryEtryPt +CODEqueryEtryPt_STD_OMOD_QUERIES +ENDqueryEtryPt + + + +/* Reset config variables for this module to default values. + */ +static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal) +{ + DEFiRet; + bUseArrayInterface = 0; + RETiRet; +} + + +BEGINmodInit() + rsRetVal localRet; + rsRetVal (*pomsrGetSupportedTplOpts)(unsigned long *pOpts); + unsigned long opts; + int bArrayPassingSupported; /* does core support template passing as an array? */ +CODESTARTmodInit + *ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */ +CODEmodInit_QueryRegCFSLineHdlr + /* check if the rsyslog core supports parameter passing code */ + bArrayPassingSupported = 0; + localRet = pHostQueryEtryPt((uchar*)"OMSRgetSupportedTplOpts", &pomsrGetSupportedTplOpts); + if(localRet == RS_RET_OK) { + /* found entry point, so let's see if core supports array passing */ + CHKiRet((*pomsrGetSupportedTplOpts)(&opts)); + if(opts & OMSR_TPL_AS_ARRAY) + bArrayPassingSupported = 1; + } else if(localRet != RS_RET_ENTRY_POINT_NOT_FOUND) { + ABORT_FINALIZE(localRet); /* Something else went wrong, what is not acceptable */ + } + DBGPRINTF("omstdout: array-passing is %ssupported by rsyslog core.\n", bArrayPassingSupported ? "" : "not "); + + if(bArrayPassingSupported) { + /* enable config comand only if core supports it */ + CHKiRet(omsdRegCFSLineHdlr((uchar *)"actionomstdoutarrayinterface", 0, eCmdHdlrBinary, NULL, + &bUseArrayInterface, STD_LOADABLE_MODULE_ID)); + } + CHKiRet(omsdRegCFSLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, + resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID)); +ENDmodInit + +/* vi:set ai: + */ diff --git a/plugins/omtemplate/Makefile.am b/plugins/omtemplate/Makefile.am new file mode 100644 index 00000000..e816c7c6 --- /dev/null +++ b/plugins/omtemplate/Makefile.am @@ -0,0 +1,8 @@ +pkglib_LTLIBRARIES = omtemplate.la + +omtemplate_la_SOURCES = omtemplate.c +omtemplate_la_CPPFLAGS = $(RSRT_CFLAGS) $(PTHREADS_CFLAGS) +omtemplate_la_LDFLAGS = -module -avoid-version +omtemplate_la_LIBADD = + +EXTRA_DIST = diff --git a/plugins/omtemplate/omtemplate.c b/plugins/omtemplate/omtemplate.c new file mode 100644 index 00000000..e35968ad --- /dev/null +++ b/plugins/omtemplate/omtemplate.c @@ -0,0 +1,220 @@ +/* omtemplate.c + * This is a template for an output module. It implements a very + * simple single-threaded output, just as thought of by the output + * plugin interface. + * + * NOTE: read comments in module-template.h for more specifics! + * + * File begun on 2009-03-16 by RGerhards + * + * Copyright 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ +#include "config.h" +#include "rsyslog.h" +#include <stdio.h> +#include <stdarg.h> +#include <stdlib.h> +#include <string.h> +#include <assert.h> +#include <signal.h> +#include <errno.h> +#include <time.h> +#include "dirty.h" +#include "syslogd-types.h" +#include "srUtils.h" +#include "template.h" +#include "module-template.h" +#include "errmsg.h" +#include "cfsysline.h" + +MODULE_TYPE_OUTPUT + +/* internal structures + */ +DEF_OMOD_STATIC_DATA +DEFobjCurrIf(errmsg) + +typedef struct _instanceData { + /* here you need to define all action-specific data. A record of type + * instanceData will be handed over to each instance of the action. Keep + * in mind that there may be several invocations of the same type of action + * inside rsyslog.conf, and this is what keeps them apart. Do NOT use + * static data for this! + */ + unsigned iSrvPort; /* sample: server port */ +} instanceData; + +/* config variables + * For the configuration interface, we need to keep track of some settings. This + * is done in global variables. It works as follows: when configuration statements + * are entered, the config file handler (or custom function) sets the global + * variable here. When the action then actually is instantiated, this handler + * copies over to instanceData whatever configuration settings (from the global + * variables) apply. The global variables are NEVER used inside an action + * instance (at least this is how it is supposed to work ;) + */ +static int iSrvPort = 0; /* sample: server port */ + + +BEGINcreateInstance +CODESTARTcreateInstance +ENDcreateInstance + + +BEGINisCompatibleWithFeature +CODESTARTisCompatibleWithFeature + /* use this to specify if select features are supported by this + * plugin. If not, the framework will handle that. Currently, only + * RepeatedMsgReduction ("last message repeated n times") is optional. + */ + if(eFeat == sFEATURERepeatedMsgReduction) + iRet = RS_RET_OK; +ENDisCompatibleWithFeature + + +BEGINfreeInstance +CODESTARTfreeInstance + /* this is a cleanup callback. All dynamically-allocated resources + * in instance data must be cleaned up here. Prime examples are + * malloc()ed memory, file & database handles and the like. + */ +ENDfreeInstance + + +BEGINdbgPrintInstInfo +CODESTARTdbgPrintInstInfo + /* permits to spit out some debug info */ +ENDdbgPrintInstInfo + + +BEGINtryResume +CODESTARTtryResume + /* this is called when an action has been suspended and the + * rsyslog core tries to resume it. The action must then + * retry (if possible) and report RS_RET_OK if it succeeded + * or RS_RET_SUSPENDED otherwise. + * Note that no data can be written in this callback, as it is + * not present. Prime examples of what can be retried are + * reconnects to remote hosts, reconnects to database, + * opening of files and the like. + * If there is no retry-type of operation, the action may + * return RS_RET_OK, so that it will get called on its doAction + * entry point (where it receives data), retries there, and + * immediately returns RS_RET_SUSPENDED if that does not work + * out. This disables some optimizations in the core's retry logic, + * but is a valid and expected behaviour. Note that it is also OK + * for the retry entry point to return OK but the immediately following + * doAction call to fail. In real life, for example, a buggy com line + * may cause such behaviour. + * Note that there is no guarantee that the core will very quickly + * call doAction after the retry succeeded. Today, it does, but that may + * not always be the case. + */ +ENDtryResume + +BEGINdoAction +CODESTARTdoAction + /* this is where you receive the message and need to carry out the + * action. Data is provided in ppString[i] where 0 <= i <= num of strings + * requested. + * Return RS_RET_OK if all goes well, RS_RET_SUSPENDED if the action can + * currently not complete, or an error code or RS_RET_DISABLED. The later + * two should only be returned if there is no hope that the action can be + * restored unless an rsyslog restart (prime example is an invalid config). + * Error code or RS_RET_DISABLED permanently disables the action, up to + * the next restart. + */ +ENDdoAction + + +BEGINparseSelectorAct +CODESTARTparseSelectorAct +CODE_STD_STRING_REQUESTparseSelectorAct(1) + /* first check if this config line is actually for us + * This is a clumpsy interface. We receive the action-part of the selector line + * and need to look at the first characters. If they match our signature + * ":omtemplate:", then we need to instantiate an action. It is recommended that + * newer actions just watch for the template and all other parameters are passed in + * via $-config-lines, this will hopefully be compatbile with future config syntaxes. + * If we do not detect our signature, we must return with RS_RET_CONFLINE_UNPROCESSED + * and NOT do anything else. + */ + if(strncmp((char*) p, ":omtemplate:", sizeof(":omtemplate:") - 1)) { + ABORT_FINALIZE(RS_RET_CONFLINE_UNPROCESSED); + } + + /* ok, if we reach this point, we have something for us */ + p += sizeof(":omtemplate:") - 1; /* eat indicator sequence (-1 because of '\0'!) */ + CHKiRet(createInstance(&pData)); + + /* check if a non-standard template is to be applied */ + if(*(p-1) == ';') + --p; + /* if we have, call rsyslog runtime to get us template. Note that StdFmt below is + * the standard name. Currently, we may need to patch tools/syslogd.c if we need + * to add a new standard template. + */ + CHKiRet(cflineParseTemplateName(&p, *ppOMSR, 0, OMSR_RQD_TPL_OPT_SQL, (uchar*) " StdFmt")); + + /* if we reach this point, all went well, and we can copy over to instanceData + * those configuration elements that we need. + */ + pData->iSrvPort = (unsigned) iSrvPort; /* set configured port */ + +CODE_STD_FINALIZERparseSelectorAct +ENDparseSelectorAct + + +BEGINmodExit +CODESTARTmodExit +ENDmodExit + + +BEGINqueryEtryPt +CODESTARTqueryEtryPt +CODEqueryEtryPt_STD_OMOD_QUERIES +ENDqueryEtryPt + + +/* Reset config variables for this module to default values. + */ +static rsRetVal +resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal) +{ + DEFiRet; + iSrvPort = 0; /* zero is the default port */ + RETiRet; +} + + +BEGINmodInit() +CODESTARTmodInit + *ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */ +CODEmodInit_QueryRegCFSLineHdlr + CHKiRet(objUse(errmsg, CORE_COMPONENT)); + /* register our config handlers */ + /* confguration parameters MUST always be specified in lower case! */ + CHKiRet(omsdRegCFSLineHdlr((uchar *)"actionomtemplteserverport", 0, eCmdHdlrInt, NULL, &iSrvPort, STD_LOADABLE_MODULE_ID)); + /* "resetconfigvariables" should be provided. Notat that it is a chained directive */ + CHKiRet(omsdRegCFSLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID)); +ENDmodInit + +/* vi:set ai: + */ diff --git a/runtime/Makefile.am b/runtime/Makefile.am index 2e6c4041..eeb656d6 100644 --- a/runtime/Makefile.am +++ b/runtime/Makefile.am @@ -7,6 +7,7 @@ pkglib_LTLIBRARIES = librsyslog_la_SOURCES = \ rsyslog.c \ rsyslog.h \ + unicode-helper.h \ atomic.h \ syslogd-types.h \ module-template.h \ @@ -16,6 +17,8 @@ librsyslog_la_SOURCES = \ glbl.c \ conf.c \ conf.h \ + parser.h \ + parser.c \ msg.c \ msg.h \ linkedlist.c \ @@ -118,6 +121,13 @@ lmnetstrms_la_CPPFLAGS = $(PTHREADS_CFLAGS) $(RSRT_CFLAGS) lmnetstrms_la_LDFLAGS = -module -avoid-version lmnetstrms_la_LIBADD = +# generic stream server framework +pkglib_LTLIBRARIES += lmstrmsrv.la +lmstrmsrv_la_SOURCES = strmsrv.c strmsrv.h strms_sess.c strms_sess.h +lmstrmsrv_la_CPPFLAGS = $(PTHREADS_CFLAGS) $(RSRT_CFLAGS) +lmstrmsrv_la_LDFLAGS = -module -avoid-version +lmstrmsrv_la_LIBADD = + # netstream drivers # plain tcp driver - main driver diff --git a/runtime/atomic.h b/runtime/atomic.h index 10dbac90..fdf64214 100644 --- a/runtime/atomic.h +++ b/runtime/atomic.h @@ -42,6 +42,7 @@ */ #ifdef HAVE_ATOMIC_BUILTINS # define ATOMIC_INC(data) ((void) __sync_fetch_and_add(&(data), 1)) +# define ATOMIC_DEC(data) ((void) __sync_sub_and_fetch(&(data), 1)) # define ATOMIC_DEC_AND_FETCH(data) __sync_sub_and_fetch(&(data), 1) # define ATOMIC_FETCH_32BIT(data) ((unsigned) __sync_fetch_and_and(&(data), 0xffffffff)) # define ATOMIC_STORE_1_TO_32BIT(data) __sync_lock_test_and_set(&(data), 1) @@ -55,6 +56,7 @@ */ # warning "atomic builtins not available, using nul operations - rsyslogd will probably be racy!" # define ATOMIC_INC(data) (++(data)) +# define ATOMIC_DEC(data) (--(data)) # define ATOMIC_DEC_AND_FETCH(data) (--(data)) # define ATOMIC_FETCH_32BIT(data) (data) # define ATOMIC_STORE_1_TO_32BIT(data) (data) = 1 diff --git a/runtime/cfsysline.c b/runtime/cfsysline.c index c4490b48..0fb4247d 100644 --- a/runtime/cfsysline.c +++ b/runtime/cfsysline.c @@ -364,7 +364,7 @@ static rsRetVal doGetGID(uchar **pp, rsRetVal (*pSetHdlr)(void*, uid_t), void *p /* we set value via a set function */ CHKiRet(pSetHdlr(pVal, pgBuf->gr_gid)); } - dbgprintf("gid %d obtained for group '%s'\n", pgBuf->gr_gid, szName); + dbgprintf("gid %d obtained for group '%s'\n", (int) pgBuf->gr_gid, szName); } skipWhiteSpace(pp); /* skip over any whitespace */ @@ -406,7 +406,7 @@ static rsRetVal doGetUID(uchar **pp, rsRetVal (*pSetHdlr)(void*, uid_t), void *p /* we set value via a set function */ CHKiRet(pSetHdlr(pVal, ppwBuf->pw_uid)); } - dbgprintf("uid %d obtained for user '%s'\n", ppwBuf->pw_uid, szName); + dbgprintf("uid %d obtained for user '%s'\n", (int) ppwBuf->pw_uid, szName); } skipWhiteSpace(pp); /* skip over any whitespace */ @@ -462,7 +462,7 @@ getWord(uchar **pp, cstr_t **ppStrB) ASSERT(*pp != NULL); ASSERT(ppStrB != NULL); - CHKiRet(rsCStrConstruct(ppStrB)); + CHKiRet(cstrConstruct(ppStrB)); skipWhiteSpace(pp); /* skip over any whitespace */ @@ -470,9 +470,9 @@ getWord(uchar **pp, cstr_t **ppStrB) p = *pp; while(*p && !isspace((int) *p)) { - CHKiRet(rsCStrAppendChar(*ppStrB, *p++)); + CHKiRet(cstrAppendChar(*ppStrB, *p++)); } - CHKiRet(rsCStrFinish(*ppStrB)); + CHKiRet(cstrFinalize(*ppStrB)); *pp = p; @@ -506,7 +506,7 @@ static rsRetVal doGetWord(uchar **pp, rsRetVal (*pSetHdlr)(void*, uchar*), void ASSERT(*pp != NULL); CHKiRet(getWord(pp, &pStrB)); - CHKiRet(rsCStrConvSzStrAndDestruct(pStrB, &pNewVal, 0)); + CHKiRet(cstrConvSzStrAndDestruct(pStrB, &pNewVal, 0)); pStrB = NULL; /* we got the word, now set it */ @@ -525,7 +525,7 @@ static rsRetVal doGetWord(uchar **pp, rsRetVal (*pSetHdlr)(void*, uchar*), void finalize_it: if(iRet != RS_RET_OK) { if(pStrB != NULL) - rsCStrDestruct(&pStrB); + cstrDestruct(&pStrB); } RETiRet; @@ -548,7 +548,7 @@ doSyslogName(uchar **pp, rsRetVal (*pSetHdlr)(void*, int), void *pVal, syslogNam ASSERT(*pp != NULL); CHKiRet(getWord(pp, &pStrB)); /* get word */ - iNewVal = decodeSyslogName(rsCStrGetSzStr(pStrB), pNameTable); + iNewVal = decodeSyslogName(cstrGetSzStr(pStrB), pNameTable); if(pSetHdlr == NULL) { /* we should set value directly to var */ diff --git a/runtime/conf.c b/runtime/conf.c index ad2f4c15..a1d74b93 100644 --- a/runtime/conf.c +++ b/runtime/conf.c @@ -46,7 +46,9 @@ #include <glob.h> #include <sys/types.h> #ifdef HAVE_LIBGEN_H -# include <libgen.h> +# ifndef OS_SOLARIS +# include <libgen.h> +# endif #endif #include "rsyslog.h" @@ -68,6 +70,9 @@ #include "ctok.h" #include "ctok_token.h" +#ifdef OS_SOLARIS +# define NAME_MAX MAXNAMELEN +#endif /* forward definitions */ static rsRetVal cfline(uchar *line, selector_t **pfCurr); @@ -521,17 +526,15 @@ rsRetVal cflineParseTemplateName(uchar** pp, omodStringRequest_t *pOMSR, int iEn tplName = (uchar*) strdup((char*)dfltTplName); } else { /* template specified, pick it up */ - if(rsCStrConstruct(&pStrB) != RS_RET_OK) { - ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); - } + CHKiRet(cstrConstruct(&pStrB)); /* now copy the string */ while(*p && *p != '#' && !isspace((int) *p)) { - CHKiRet(rsCStrAppendChar(pStrB, *p)); + CHKiRet(cstrAppendChar(pStrB, *p)); ++p; } - CHKiRet(rsCStrFinish(pStrB)); - CHKiRet(rsCStrConvSzStrAndDestruct(pStrB, &tplName, 0)); + CHKiRet(cstrFinalize(pStrB)); + CHKiRet(cstrConvSzStrAndDestruct(pStrB, &tplName, 0)); } iRet = OMSRsetEntry(pOMSR, iEntry, tplName, iTplOpts); @@ -795,6 +798,9 @@ dbgprintf("calling expression parser, pp %p ('%s')\n", *pline, *pline); CHKiRet(ctok.Getpp(tok, pline)); CHKiRet(ctok.Destruct(&tok)); + /* debug support - print vmprg after construction (uncomment to use) */ + /* vmprgDebugPrint(f->f_filterData.f_expr->pVmprg); */ + /* we now need to skip whitespace to the action part, else we confuse * the legacy rsyslog conf parser. -- rgerhards, 2008-02-25 */ @@ -879,6 +885,8 @@ static rsRetVal cflineProcessPropFilter(uchar **pline, register selector_t *f) f->f_filterData.prop.operation = FIOP_STARTSWITH; } else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (unsigned char*) "regex", 5)) { f->f_filterData.prop.operation = FIOP_REGEX; + } else if(!rsCStrOffsetSzStrCmp(pCSCompOp, iOffset, (unsigned char*) "ereregex", 8)) { + f->f_filterData.prop.operation = FIOP_EREREGEX; } else { errmsg.LogError(0, NO_ERRCODE, "error: invalid compare operation '%s' - ignoring selector", (char*) rsCStrGetSzStrNoNULL(pCSCompOp)); @@ -915,7 +923,7 @@ static rsRetVal cflineProcessPropFilter(uchar **pline, register selector_t *f) */ static rsRetVal cflineProcessHostSelector(uchar **pline) { - rsRetVal iRet; + DEFiRet; ASSERT(pline != NULL); ASSERT(*pline != NULL); @@ -941,21 +949,20 @@ static rsRetVal cflineProcessHostSelector(uchar **pline) dbgprintf("resetting BSD-like hostname filter\n"); eDfltHostnameCmpMode = HN_NO_COMP; if(pDfltHostnameCmp != NULL) { - if((iRet = rsCStrSetSzStr(pDfltHostnameCmp, NULL)) != RS_RET_OK) - return(iRet); + CHKiRet(rsCStrSetSzStr(pDfltHostnameCmp, NULL)); } } else { dbgprintf("setting BSD-like hostname filter to '%s'\n", *pline); if(pDfltHostnameCmp == NULL) { /* create string for parser */ - if((iRet = rsCStrConstructFromszStr(&pDfltHostnameCmp, *pline)) != RS_RET_OK) - return(iRet); + CHKiRet(rsCStrConstructFromszStr(&pDfltHostnameCmp, *pline)); } else { /* string objects exists, just update... */ - if((iRet = rsCStrSetSzStr(pDfltHostnameCmp, *pline)) != RS_RET_OK) - return(iRet); + CHKiRet(rsCStrSetSzStr(pDfltHostnameCmp, *pline)); } } - return RS_RET_OK; + +finalize_it: + RETiRet; } @@ -966,7 +973,7 @@ static rsRetVal cflineProcessHostSelector(uchar **pline) */ static rsRetVal cflineProcessTagSelector(uchar **pline) { - rsRetVal iRet; + DEFiRet; ASSERT(pline != NULL); ASSERT(*pline != NULL); @@ -985,21 +992,20 @@ static rsRetVal cflineProcessTagSelector(uchar **pline) if(**pline != '\0' && **pline == '*' && *(*pline+1) == '\0') { dbgprintf("resetting programname filter\n"); if(pDfltProgNameCmp != NULL) { - if((iRet = rsCStrSetSzStr(pDfltProgNameCmp, NULL)) != RS_RET_OK) - return(iRet); + CHKiRet(rsCStrSetSzStr(pDfltProgNameCmp, NULL)); } } else { dbgprintf("setting programname filter to '%s'\n", *pline); if(pDfltProgNameCmp == NULL) { /* create string for parser */ - if((iRet = rsCStrConstructFromszStr(&pDfltProgNameCmp, *pline)) != RS_RET_OK) - return(iRet); + CHKiRet(rsCStrConstructFromszStr(&pDfltProgNameCmp, *pline)); } else { /* string objects exists, just update... */ - if((iRet = rsCStrSetSzStr(pDfltProgNameCmp, *pline)) != RS_RET_OK) - return(iRet); + CHKiRet(rsCStrSetSzStr(pDfltProgNameCmp, *pline)); } } - return RS_RET_OK; + +finalize_it: + RETiRet; } diff --git a/runtime/ctok.c b/runtime/ctok.c index ceab15bd..263e656c 100644 --- a/runtime/ctok.c +++ b/runtime/ctok.c @@ -259,12 +259,17 @@ ctokGetVar(ctok_t *pThis, ctok_token_t *pToken) } CHKiRet(rsCStrConstruct(&pstrVal)); - /* this loop is quite simple, a variable name is terminated by whitespace. */ - while(!isspace(c)) { + /* this loop is quite simple, a variable name is terminated when a non-supported + * character is detected. Note that we currently permit a numerical digit as the + * first char, which is not permitted by ABNF. -- rgerhards, 2009-03-10 + */ + while(isalpha(c) || isdigit(c) || (c == '_') || (c == '-')) { CHKiRet(rsCStrAppendChar(pstrVal, tolower(c))); CHKiRet(ctokGetCharFromStream(pThis, &c)); } - CHKiRet(rsCStrFinish(pStrB)); + CHKiRet(ctokUngetCharFromStream(pThis, c)); /* put not processed char back */ + + CHKiRet(cstrFinalize(pstrVal)); CHKiRet(var.SetString(pToken->pVar, pstrVal)); pstrVal = NULL; @@ -314,7 +319,7 @@ ctokGetSimpStr(ctok_t *pThis, ctok_token_t *pToken) } CHKiRet(ctokGetCharFromStream(pThis, &c)); } - CHKiRet(rsCStrFinish(pStrB)); + CHKiRet(cstrFinalize(pstrVal)); CHKiRet(var.SetString(pToken->pVar, pstrVal)); pstrVal = NULL; @@ -389,6 +394,7 @@ ctokGetToken(ctok_t *pThis, ctok_token_t **ppToken) uchar c; uchar szWord[128]; int bRetry = 0; /* retry parse? Only needed for inline comments... */ + cstr_t *pstrVal; ISOBJ_TYPE_assert(pThis, ctok); ASSERT(ppToken != NULL); @@ -512,7 +518,10 @@ ctokGetToken(ctok_t *pThis, ctok_token_t **ppToken) /* push c back, higher level parser needs it */ CHKiRet(ctokUngetCharFromStream(pThis, c)); pToken->tok = ctok_FUNCTION; - /* TODO: fill function name */ + /* fill function name */ + CHKiRet(rsCStrConstruct(&pstrVal)); + CHKiRet(rsCStrSetSzStr(pstrVal, szWord)); + CHKiRet(var.SetString(pToken->pVar, pstrVal)); } else { /* give up... */ dbgprintf("parser has an invalid word (token) '%s'\n", szWord); pToken->tok = ctok_INVALID; diff --git a/runtime/datetime.c b/runtime/datetime.c index 20ca6191..99caaf97 100644 --- a/runtime/datetime.c +++ b/runtime/datetime.c @@ -62,9 +62,14 @@ DEFobjCurrIf(errmsg) * most portable and removes the need for additional structures * (but I have to admit it is somewhat "bulky";)). * - * Obviously, all caller-provided pointers must not be NULL... + * Obviously, *t must not be NULL... + * + * rgerhards, 2008-10-07: added ttSeconds to provide a way to + * obtain the second-resolution UNIX timestamp. This is needed + * in some situations to minimize time() calls (namely when doing + * output processing). This can be left NULL if not needed. */ -static void getCurrTime(struct syslogTime *t) +static void getCurrTime(struct syslogTime *t, time_t *ttSeconds) { struct timeval tp; struct tm *tm; @@ -83,6 +88,9 @@ static void getCurrTime(struct syslogTime *t) # else gettimeofday(&tp, NULL); # endif + if(ttSeconds != NULL) + *ttSeconds = tp.tv_sec; + tm = localtime_r((time_t*) &(tp.tv_sec), &tmBuf); t->year = tm->tm_year + 1900; @@ -132,6 +140,7 @@ static void getCurrTime(struct syslogTime *t) * DO NOT PUT ANY OTHER CODE IN THIS BEGIN ... END BLOCK!!!! */ + /** * Parse a 32 bit integer number from a string. * @@ -139,18 +148,21 @@ static void getCurrTime(struct syslogTime *t) * must be positioned at the first digit. Will be updated * so that on return it points to the first character AFTER * the integer parsed. + * \param pLenStr pointer to string length, decremented on exit by + * characters processed + * Note that if an empty string (len < 1) is passed in, + * the method always returns zero. * \retval The number parsed. */ - -static int srSLMGParseInt32(char** ppsz) +static int srSLMGParseInt32(uchar** ppsz, int *pLenStr) { - int i; + register int i; i = 0; - while(isdigit((int) **ppsz)) - { + while(*pLenStr > 0 && isdigit((int) **ppsz)) { i = i * 10 + **ppsz - '0'; ++(*ppsz); + --(*pLenStr); } return i; @@ -162,11 +174,15 @@ static int srSLMGParseInt32(char** ppsz) * updates the parse pointer position. The pTime parameter * is guranteed to be updated only if a new valid timestamp * could be obtained (restriction added 2008-09-16 by rgerhards). + * This method now also checks the maximum string length it is passed. + * If a *valid* timestamp is found, the string length is decremented + * by the number of characters processed. If it is not a valid timestamp, + * the length is kept unmodified. -- rgerhards, 2009-09-23 */ static rsRetVal -ParseTIMESTAMP3339(struct syslogTime *pTime, char** ppszTS) +ParseTIMESTAMP3339(struct syslogTime *pTime, uchar** ppszTS, int *pLenStr) { - char *pszTS = *ppszTS; + uchar *pszTS = *ppszTS; /* variables to temporarily hold time information while we parse */ int year; int month; @@ -179,6 +195,7 @@ ParseTIMESTAMP3339(struct syslogTime *pTime, char** ppszTS) char OffsetMode; /* UTC offset + or - */ char OffsetHour; /* UTC offset in hours */ int OffsetMinute; /* UTC offset in minutes */ + int lenStr; /* end variables to temporarily hold time information while we parse */ DEFiRet; @@ -186,48 +203,55 @@ ParseTIMESTAMP3339(struct syslogTime *pTime, char** ppszTS) assert(ppszTS != NULL); assert(pszTS != NULL); - year = srSLMGParseInt32(&pszTS); + lenStr = *pLenStr; + year = srSLMGParseInt32(&pszTS, &lenStr); /* We take the liberty to accept slightly malformed timestamps e.g. in * the format of 2003-9-1T1:0:0. This doesn't hurt on receiving. Of course, * with the current state of affairs, we would never run into this code * here because at postion 11, there is no "T" in such cases ;) */ - if(*pszTS++ != '-') + if(lenStr == 0 || *pszTS++ != '-') ABORT_FINALIZE(RS_RET_INVLD_TIME); - month = srSLMGParseInt32(&pszTS); + --lenStr; + month = srSLMGParseInt32(&pszTS, &lenStr); if(month < 1 || month > 12) ABORT_FINALIZE(RS_RET_INVLD_TIME); - if(*pszTS++ != '-') + if(lenStr == 0 || *pszTS++ != '-') ABORT_FINALIZE(RS_RET_INVLD_TIME); - day = srSLMGParseInt32(&pszTS); + --lenStr; + day = srSLMGParseInt32(&pszTS, &lenStr); if(day < 1 || day > 31) ABORT_FINALIZE(RS_RET_INVLD_TIME); - if(*pszTS++ != 'T') + if(lenStr == 0 || *pszTS++ != 'T') ABORT_FINALIZE(RS_RET_INVLD_TIME); + --lenStr; - hour = srSLMGParseInt32(&pszTS); + hour = srSLMGParseInt32(&pszTS, &lenStr); if(hour < 0 || hour > 23) ABORT_FINALIZE(RS_RET_INVLD_TIME); - if(*pszTS++ != ':') + if(lenStr == 0 || *pszTS++ != ':') ABORT_FINALIZE(RS_RET_INVLD_TIME); - minute = srSLMGParseInt32(&pszTS); + --lenStr; + minute = srSLMGParseInt32(&pszTS, &lenStr); if(minute < 0 || minute > 59) ABORT_FINALIZE(RS_RET_INVLD_TIME); - if(*pszTS++ != ':') + if(lenStr == 0 || *pszTS++ != ':') ABORT_FINALIZE(RS_RET_INVLD_TIME); - second = srSLMGParseInt32(&pszTS); + --lenStr; + second = srSLMGParseInt32(&pszTS, &lenStr); if(second < 0 || second > 60) ABORT_FINALIZE(RS_RET_INVLD_TIME); /* Now let's see if we have secfrac */ - if(*pszTS == '.') { - char *pszStart = ++pszTS; - secfrac = srSLMGParseInt32(&pszTS); + if(lenStr > 0 && *pszTS == '.') { + --lenStr; + uchar *pszStart = ++pszTS; + secfrac = srSLMGParseInt32(&pszTS, &lenStr); secfracPrecision = (int) (pszTS - pszStart); } else { secfracPrecision = 0; @@ -235,23 +259,27 @@ ParseTIMESTAMP3339(struct syslogTime *pTime, char** ppszTS) } /* check the timezone */ - if(*pszTS == 'Z') - { + if(lenStr == 0) + ABORT_FINALIZE(RS_RET_INVLD_TIME); + + if(*pszTS == 'Z') { + --lenStr; pszTS++; /* eat Z */ OffsetMode = 'Z'; OffsetHour = 0; OffsetMinute = 0; } else if((*pszTS == '+') || (*pszTS == '-')) { OffsetMode = *pszTS; + --lenStr; pszTS++; - OffsetHour = srSLMGParseInt32(&pszTS); + OffsetHour = srSLMGParseInt32(&pszTS, &lenStr); if(OffsetHour < 0 || OffsetHour > 23) ABORT_FINALIZE(RS_RET_INVLD_TIME); - if(*pszTS++ != ':') + if(lenStr == 0 || *pszTS++ != ':') ABORT_FINALIZE(RS_RET_INVLD_TIME); - OffsetMinute = srSLMGParseInt32(&pszTS); + OffsetMinute = srSLMGParseInt32(&pszTS, &lenStr); if(OffsetMinute < 0 || OffsetMinute > 59) ABORT_FINALIZE(RS_RET_INVLD_TIME); } else { @@ -260,10 +288,12 @@ ParseTIMESTAMP3339(struct syslogTime *pTime, char** ppszTS) } /* OK, we actually have a 3339 timestamp, so let's indicated this */ - if(*pszTS == ' ') + if(lenStr > 0 && *pszTS == ' ') { + --lenStr; ++pszTS; - else + } else { ABORT_FINALIZE(RS_RET_INVLD_TIME); + } /* we had success, so update parse pointer and caller-provided timestamp */ *ppszTS = pszTS; @@ -279,6 +309,7 @@ ParseTIMESTAMP3339(struct syslogTime *pTime, char** ppszTS) pTime->OffsetMode = OffsetMode; pTime->OffsetHour = OffsetHour; pTime->OffsetMinute = OffsetMinute; + *pLenStr = lenStr; finalize_it: RETiRet; @@ -297,24 +328,32 @@ finalize_it: * permits us to use a pre-aquired timestamp and thus avoids to do * a (costly) time() call. Thanks to David Lang for insisting on * time() call reduction ;). + * This method now also checks the maximum string length it is passed. + * If a *valid* timestamp is found, the string length is decremented + * by the number of characters processed. If it is not a valid timestamp, + * the length is kept unmodified. -- rgerhards, 2009-09-23 */ static rsRetVal -ParseTIMESTAMP3164(struct syslogTime *pTime, char** ppszTS) +ParseTIMESTAMP3164(struct syslogTime *pTime, uchar** ppszTS, int *pLenStr) { /* variables to temporarily hold time information while we parse */ int month; int day; + int year = 0; /* 0 means no year provided */ int hour; /* 24 hour clock */ int minute; int second; /* end variables to temporarily hold time information while we parse */ - char *pszTS; + int lenStr; + uchar *pszTS; DEFiRet; assert(ppszTS != NULL); pszTS = *ppszTS; assert(pszTS != NULL); assert(pTime != NULL); + assert(pLenStr != NULL); + lenStr = *pLenStr; /* If we look at the month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec), * we may see the following character sequences occur: @@ -333,6 +372,9 @@ ParseTIMESTAMP3164(struct syslogTime *pTime, char** ppszTS) * june, when it first manifested. This also lead to invalid parsing of the rest * of the message, as the time stamp was not detected to be correct. - rgerhards */ + if(lenStr < 3) + ABORT_FINALIZE(RS_RET_INVLD_TIME); + switch(*pszTS++) { case 'J': @@ -447,36 +489,60 @@ ParseTIMESTAMP3164(struct syslogTime *pTime, char** ppszTS) ABORT_FINALIZE(RS_RET_INVLD_TIME); } + lenStr -= 3; + /* done month */ - if(*pszTS++ != ' ') + if(lenStr == 0 || *pszTS++ != ' ') ABORT_FINALIZE(RS_RET_INVLD_TIME); /* we accept a slightly malformed timestamp when receiving. This is * we accept one-digit days */ - if(*pszTS == ' ') + if(*pszTS == ' ') { + --lenStr; ++pszTS; + } - day = srSLMGParseInt32(&pszTS); + day = srSLMGParseInt32(&pszTS, &lenStr); if(day < 1 || day > 31) ABORT_FINALIZE(RS_RET_INVLD_TIME); - if(*pszTS++ != ' ') + if(lenStr == 0 || *pszTS++ != ' ') ABORT_FINALIZE(RS_RET_INVLD_TIME); - hour = srSLMGParseInt32(&pszTS); + --lenStr; + + /* time part */ + hour = srSLMGParseInt32(&pszTS, &lenStr); + if(hour > 1970 && hour < 2100) { + /* if so, we assume this actually is a year. This is a format found + * e.g. in Cisco devices. + * (if you read this 2100+ trying to fix a bug, congratulate me + * to how long the code survived - me no longer ;)) -- rgerhards, 2008-11-18 + */ + year = hour; + + /* re-query the hour, this time it must be valid */ + if(lenStr == 0 || *pszTS++ != ' ') + ABORT_FINALIZE(RS_RET_INVLD_TIME); + --lenStr; + hour = srSLMGParseInt32(&pszTS, &lenStr); + } + if(hour < 0 || hour > 23) ABORT_FINALIZE(RS_RET_INVLD_TIME); - if(*pszTS++ != ':') + if(lenStr == 0 || *pszTS++ != ':') ABORT_FINALIZE(RS_RET_INVLD_TIME); - minute = srSLMGParseInt32(&pszTS); + --lenStr; + minute = srSLMGParseInt32(&pszTS, &lenStr); if(minute < 0 || minute > 59) ABORT_FINALIZE(RS_RET_INVLD_TIME); - if(*pszTS++ != ':') + if(lenStr == 0 || *pszTS++ != ':') ABORT_FINALIZE(RS_RET_INVLD_TIME); - second = srSLMGParseInt32(&pszTS); + --lenStr; + second = srSLMGParseInt32(&pszTS, &lenStr); if(second < 0 || second > 60) ABORT_FINALIZE(RS_RET_INVLD_TIME); @@ -484,8 +550,10 @@ ParseTIMESTAMP3164(struct syslogTime *pTime, char** ppszTS) * invalid format, it occurs frequently enough (e.g. with Cisco devices) * to permit it as a valid case. -- rgerhards, 2008-09-12 */ - if(*pszTS++ == ':') + if(lenStr == 0 || *pszTS++ == ':') { ++pszTS; /* just skip past it */ + --lenStr; + } /* we had success, so update parse pointer and caller-provided timestamp * fields we do not have are not updated in the caller's timestamp. This @@ -494,12 +562,15 @@ ParseTIMESTAMP3164(struct syslogTime *pTime, char** ppszTS) *ppszTS = pszTS; /* provide updated parse position back to caller */ pTime->timeType = 1; pTime->month = month; + if(year > 0) + pTime->year = year; /* persist year if detected */ pTime->day = day; pTime->hour = hour; pTime->minute = minute; pTime->second = second; pTime->secfracPrecision = 0; pTime->secfrac = 0; + *pLenStr = lenStr; finalize_it: RETiRet; diff --git a/runtime/datetime.h b/runtime/datetime.h index 2210af02..6377a4a4 100644 --- a/runtime/datetime.h +++ b/runtime/datetime.h @@ -35,9 +35,9 @@ typedef struct datetime_s { /* interfaces */ BEGINinterface(datetime) /* name must also be changed in ENDinterface macro! */ - void (*getCurrTime)(struct syslogTime *t); - rsRetVal (*ParseTIMESTAMP3339)(struct syslogTime *pTime, char** ppszTS); - rsRetVal (*ParseTIMESTAMP3164)(struct syslogTime *pTime, char** pszTS); + void (*getCurrTime)(struct syslogTime *t, time_t *ttSeconds); + rsRetVal (*ParseTIMESTAMP3339)(struct syslogTime *pTime, uchar** ppszTS, int *); + rsRetVal (*ParseTIMESTAMP3164)(struct syslogTime *pTime, uchar** pszTS, int *); int (*formatTimestampToMySQL)(struct syslogTime *ts, char* pDst, size_t iLenDst); int (*formatTimestampToPgSQL)(struct syslogTime *ts, char *pDst, size_t iLenDst); int (*formatTimestamp3339)(struct syslogTime *ts, char* pBuf, size_t iLenBuf); diff --git a/runtime/debug.c b/runtime/debug.c index 62e2a687..4ee90226 100644 --- a/runtime/debug.c +++ b/runtime/debug.c @@ -1,3 +1,4 @@ +#include <sys/syscall.h> /* debug.c * * This file proides debug and run time error analysis support. Some of the @@ -886,7 +887,9 @@ dbgprint(obj_t *pObj, char *pszMsg, size_t lenMsg) if(stddbg != -1) write(stddbg, pszWriteBuf, lenWriteBuf); if(altdbg != -1) write(altdbg, pszWriteBuf, lenWriteBuf); } + lenWriteBuf = snprintf(pszWriteBuf, sizeof(pszWriteBuf), "%s: ", pszThrdName); + // use for testing: lenWriteBuf = snprintf(pszWriteBuf, sizeof(pszWriteBuf), "{%ld}%s: ", (long) syscall(SYS_gettid), pszThrdName); if(stddbg != -1) write(stddbg, pszWriteBuf, lenWriteBuf); if(altdbg != -1) write(altdbg, pszWriteBuf, lenWriteBuf); /* print object name header if we have an object */ @@ -1340,7 +1343,7 @@ rsRetVal dbgClassInit(void) if(pszAltDbgFileName != NULL) { /* we have a secondary file, so let's open it) */ - if((altdbg = open(pszAltDbgFileName, O_WRONLY|O_CREAT|O_TRUNC|O_NOCTTY, S_IRUSR|S_IWUSR)) == -1) { + if((altdbg = open(pszAltDbgFileName, O_WRONLY|O_CREAT|O_TRUNC|O_NOCTTY|O_CLOEXEC, S_IRUSR|S_IWUSR)) == -1) { fprintf(stderr, "alternate debug file could not be opened, ignoring. Error: %s\n", strerror(errno)); } } diff --git a/runtime/debug.h b/runtime/debug.h index 43836024..1375493d 100644 --- a/runtime/debug.h +++ b/runtime/debug.h @@ -101,6 +101,8 @@ void dbgSetThrdName(uchar *pszName); void dbgPrintAllDebugInfo(void); /* macros */ +#define DBGPRINTF(...) if(Debug) { dbgprintf(__VA_ARGS__); } +#define DBGOPRINT(...) if(Debug) { dbgoprint(__VA_ARGS__); } #ifdef RTINST # define BEGINfunc static dbgFuncDB_t *pdbgFuncDB; int dbgCALLStaCK_POP_POINT = dbgEntrFunc(&pdbgFuncDB, __FILE__, __func__, __LINE__); # define ENDfunc dbgExitFunc(pdbgFuncDB, dbgCALLStaCK_POP_POINT, RS_RET_NO_IRET); diff --git a/runtime/expr.c b/runtime/expr.c index ee5b9e2c..e449d1c7 100644 --- a/runtime/expr.c +++ b/runtime/expr.c @@ -55,11 +55,63 @@ DEFobjCurrIf(ctok) * rgerhards, 2008-02-19 */ -/* forward definiton - thanks to recursive ABNF, we can not avoid at least one ;) */ +/* forward definition - thanks to recursive ABNF, we can not avoid at least one ;) */ static rsRetVal expr(expr_t *pThis, ctok_t *tok); static rsRetVal +function(expr_t *pThis, ctok_t *tok) +{ + DEFiRet; + ctok_token_t *pToken = NULL; + int iNumArgs = 0; + var_t *pVar; + + ISOBJ_TYPE_assert(pThis, expr); + ISOBJ_TYPE_assert(tok, ctok); + + CHKiRet(ctok.GetToken(tok, &pToken)); + /* note: pToken is destructed in finalize_it */ + + if(pToken->tok == ctok_LPAREN) { + CHKiRet(ctok_token.Destruct(&pToken)); /* token processed, "eat" it */ + CHKiRet(ctok.GetToken(tok, &pToken)); /* get next one */ + } else + ABORT_FINALIZE(RS_RET_FUNC_NO_LPAREN); + + /* we first push all the params on the stack. Then we call the function */ + while(pToken->tok != ctok_RPAREN) { + ++iNumArgs; + CHKiRet(ctok.UngetToken(tok, pToken)); /* not for us, so let others process it */ + CHKiRet(expr(pThis, tok)); + CHKiRet(ctok.GetToken(tok, &pToken)); /* get next one, needed for while() check */ + if(pToken->tok == ctok_COMMA) { + CHKiRet(ctok_token.Destruct(&pToken)); /* token processed, "eat" it */ + CHKiRet(ctok.GetToken(tok, &pToken)); /* get next one */ + if(pToken->tok == ctok_RPAREN) { + ABORT_FINALIZE(RS_RET_FUNC_MISSING_EXPR); + } + } + } + + + /* now push number of arguments - this must be on top of the stack */ + CHKiRet(var.Construct(&pVar)); + CHKiRet(var.ConstructFinalize(pVar)); + CHKiRet(var.SetNumber(pVar, iNumArgs)); + CHKiRet(vmprg.AddVarOperation(pThis->pVmprg, opcode_PUSHCONSTANT, pVar)); /* add to program */ + + +finalize_it: + if(pToken != NULL) { + ctok_token.Destruct(&pToken); /* "eat" processed token */ + } + + RETiRet; +} + + +static rsRetVal terminal(expr_t *pThis, ctok_t *tok) { DEFiRet; @@ -85,8 +137,14 @@ terminal(expr_t *pThis, ctok_t *tok) break; case ctok_FUNCTION: dbgoprint((obj_t*) pThis, "function\n"); - /* TODO: vm: call - well, need to implement that first */ - ABORT_FINALIZE(RS_RET_NOT_IMPLEMENTED); + CHKiRet(function(pThis, tok)); /* this creates the stack call frame */ + /* ... but we place the call instruction onto the stack ourselfs (because + * we have all relevant information) + */ + CHKiRet(ctok_token.UnlinkVar(pToken, &pVar)); + CHKiRet(var.ConvToString(pVar)); /* make sure we have a string */ + CHKiRet(vmprg.AddCallOperation(pThis->pVmprg, pVar->val.pStr)); /* add to program */ + CHKiRet(var.Destruct(&pVar)); break; case ctok_MSGVAR: dbgoprint((obj_t*) pThis, "MSGVAR\n"); @@ -406,6 +464,7 @@ ENDobjQueryInterface(expr) */ BEGINObjClassInit(expr, 1, OBJ_IS_CORE_MODULE) /* class, version */ /* request objects we use */ + CHKiRet(objUse(var, CORE_COMPONENT)); CHKiRet(objUse(vmprg, CORE_COMPONENT)); CHKiRet(objUse(var, CORE_COMPONENT)); CHKiRet(objUse(ctok_token, CORE_COMPONENT)); diff --git a/runtime/glbl.c b/runtime/glbl.c index 1114fcd3..28f14320 100644 --- a/runtime/glbl.c +++ b/runtime/glbl.c @@ -51,12 +51,16 @@ DEFobjStaticHelpers * class... */ static uchar *pszWorkDir = NULL; +static int bOptimizeUniProc = 1; /* enable uniprocessor optimizations */ +static int bHUPisRestart = 1; /* should SIGHUP cause a full system restart? */ +static int bPreserveFQDN = 0; /* should FQDNs always be preserved? */ static int iMaxLine = 2048; /* maximum length of a syslog message */ static int iDefPFFamily = PF_UNSPEC; /* protocol family (IPv4, IPv6 or both) */ static int bDropMalPTRMsgs = 0;/* Drop messages which have malicious PTR records during DNS lookup */ static int option_DisallowWarning = 1; /* complain if message from disallowed sender is received */ static int bDisableDNS = 0; /* don't look up IP addresses of remote messages */ static uchar *LocalHostName = NULL;/* our hostname - read-only after startup */ +static uchar *LocalFQDNName = NULL;/* our hostname as FQDN - read-only after startup */ static uchar *LocalDomain; /* our local domain name - read-only after startup */ static char **StripDomains = NULL;/* these domains may be stripped before writing logs - r/o after s.u., never touched by init */ static char **LocalHosts = NULL;/* these hosts are logged with their hostname - read-only after startup, never touched by init */ @@ -85,6 +89,9 @@ static dataType Get##nameFunc(void) \ return(nameVar); \ } +SIMP_PROP(OptimizeUniProc, bOptimizeUniProc, int) +SIMP_PROP(PreserveFQDN, bPreserveFQDN, int) +SIMP_PROP(HUPisRestart, bHUPisRestart, int) SIMP_PROP(MaxLine, iMaxLine, int) SIMP_PROP(DefPFFamily, iDefPFFamily, int) /* note that in the future we may check the family argument */ SIMP_PROP(DropMalPTRMsgs, bDropMalPTRMsgs, int) @@ -94,6 +101,7 @@ SIMP_PROP(LocalDomain, LocalDomain, uchar*) SIMP_PROP(StripDomains, StripDomains, char**) SIMP_PROP(LocalHosts, LocalHosts, char**) +SIMP_PROP_SET(LocalFQDNName, LocalFQDNName, uchar*) SIMP_PROP_SET(LocalHostName, LocalHostName, uchar*) SIMP_PROP_SET(DfltNetstrmDrvr, pszDfltNetstrmDrvr, uchar*) /* TODO: use custom function which frees existing value */ SIMP_PROP_SET(DfltNetstrmDrvrCAF, pszDfltNetstrmDrvrCAF, uchar*) /* TODO: use custom function which frees existing value */ @@ -110,7 +118,27 @@ SIMP_PROP_SET(DfltNetstrmDrvrCertFile, pszDfltNetstrmDrvrCertFile, uchar*) /* TO static uchar* GetLocalHostName(void) { - return(LocalHostName == NULL ? (uchar*) "[localhost]" : LocalHostName); + uchar *pszRet; + + if(LocalHostName == NULL) + pszRet = (uchar*) "[localhost]"; + else { + if(GetPreserveFQDN() == 1) + pszRet = LocalFQDNName; + else + pszRet = LocalHostName; + } + return(pszRet); +} + + +/* return the current localhost name as FQDN (requires FQDN to be set) + * TODO: we should set the FQDN ourselfs in here! + */ +static uchar* +GetLocalFQDNName(void) +{ + return(LocalFQDNName == NULL ? (uchar*) "[localhost]" : LocalFQDNName); } @@ -173,10 +201,14 @@ CODESTARTobjQueryInterface(glbl) pIf->Get##name = Get##name; \ pIf->Set##name = Set##name; SIMP_PROP(MaxLine); + SIMP_PROP(OptimizeUniProc); + SIMP_PROP(PreserveFQDN); + SIMP_PROP(HUPisRestart); SIMP_PROP(DefPFFamily); SIMP_PROP(DropMalPTRMsgs); SIMP_PROP(Option_DisallowWarning); SIMP_PROP(DisableDNS); + SIMP_PROP(LocalFQDNName) SIMP_PROP(LocalHostName) SIMP_PROP(LocalDomain) SIMP_PROP(StripDomains) @@ -216,6 +248,9 @@ static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __a pszWorkDir = NULL; } bDropMalPTRMsgs = 0; + bOptimizeUniProc = 1; + bHUPisRestart = 1; + bPreserveFQDN = 0; return RS_RET_OK; } @@ -235,6 +270,9 @@ BEGINAbstractObjClassInit(glbl, 1, OBJ_IS_CORE_MODULE) /* class, version */ CHKiRet(regCfSysLineHdlr((uchar *)"defaultnetstreamdrivercafile", 0, eCmdHdlrGetWord, NULL, &pszDfltNetstrmDrvrCAF, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"defaultnetstreamdriverkeyfile", 0, eCmdHdlrGetWord, NULL, &pszDfltNetstrmDrvrKeyFile, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"defaultnetstreamdrivercertfile", 0, eCmdHdlrGetWord, NULL, &pszDfltNetstrmDrvrCertFile, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"optimizeforuniprocessor", 0, eCmdHdlrBinary, NULL, &bOptimizeUniProc, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"hupisrestart", 0, eCmdHdlrBinary, NULL, &bHUPisRestart, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"preservefqdn", 0, eCmdHdlrBinary, NULL, &bPreserveFQDN, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, NULL)); ENDObjClassInit(glbl) @@ -255,6 +293,8 @@ BEGINObjClassExit(glbl, OBJ_IS_CORE_MODULE) /* class, version */ free(pszWorkDir); if(LocalHostName != NULL) free(LocalHostName); + if(LocalFQDNName != NULL) + free(LocalFQDNName); ENDObjClassExit(glbl) /* vi:set ai: diff --git a/runtime/glbl.h b/runtime/glbl.h index 0c83bdd5..5bdf4f57 100644 --- a/runtime/glbl.h +++ b/runtime/glbl.h @@ -41,10 +41,14 @@ BEGINinterface(glbl) /* name must also be changed in ENDinterface macro! */ dataType (*Get##name)(void); \ rsRetVal (*Set##name)(dataType); SIMP_PROP(MaxLine, int) + SIMP_PROP(OptimizeUniProc, int) + SIMP_PROP(HUPisRestart, int) + SIMP_PROP(PreserveFQDN, int) SIMP_PROP(DefPFFamily, int) SIMP_PROP(DropMalPTRMsgs, int) SIMP_PROP(Option_DisallowWarning, int) SIMP_PROP(DisableDNS, int) + SIMP_PROP(LocalFQDNName, uchar*) SIMP_PROP(LocalHostName, uchar*) SIMP_PROP(LocalDomain, uchar*) SIMP_PROP(StripDomains, char**) @@ -55,7 +59,8 @@ BEGINinterface(glbl) /* name must also be changed in ENDinterface macro! */ SIMP_PROP(DfltNetstrmDrvrCertFile, uchar*) #undef SIMP_PROP ENDinterface(glbl) -#define glblCURR_IF_VERSION 1 /* increment whenever you change the interface structure! */ +#define glblCURR_IF_VERSION 2 /* increment whenever you change the interface structure! */ +/* version 2 had PreserveFQDN added - rgerhards, 2008-12-08 */ /* the remaining prototypes */ PROTOTYPEObj(glbl); diff --git a/runtime/module-template.h b/runtime/module-template.h index eb39b587..3e963199 100644 --- a/runtime/module-template.h +++ b/runtime/module-template.h @@ -39,7 +39,8 @@ #define DEF_OMOD_STATIC_DATA \ DEF_MOD_STATIC_DATA \ - DEFobjCurrIf(obj) + DEFobjCurrIf(obj) \ + static __attribute__((unused)) int bCoreSupportsBatching; #define DEF_IMOD_STATIC_DATA \ DEF_MOD_STATIC_DATA \ DEFobjCurrIf(obj) @@ -160,6 +161,37 @@ static rsRetVal isCompatibleWithFeature(syslogFeature __attribute__((unused)) eF RETiRet;\ } + +/* beginTransaction() + * introduced in v4.3.3 -- rgerhards, 2009-04-27 + */ +#define BEGINbeginTransaction \ +static rsRetVal beginTransaction(instanceData __attribute__((unused)) *pData)\ +{\ + DEFiRet; + +#define CODESTARTbeginTransaction /* currently empty, but may be extended */ + +#define ENDbeginTransaction \ + RETiRet;\ +} + + +/* endTransaction() + * introduced in v4.3.3 -- rgerhards, 2009-04-27 + */ +#define BEGINendTransaction \ +static rsRetVal endTransaction(instanceData __attribute__((unused)) *pData)\ +{\ + DEFiRet; + +#define CODESTARTendTransaction /* currently empty, but may be extended */ + +#define ENDendTransaction \ + RETiRet;\ +} + + /* doAction() */ #define BEGINdoAction \ @@ -324,6 +356,18 @@ static rsRetVal queryEtryPt(uchar *name, rsRetVal (**pEtryPoint)())\ *pEtryPoint = tryResume;\ } + +/* the following definition is queryEtryPt block that must be added + * if an output module supports the transactional interface. + * rgerhards, 2009-04-27 + */ +#define CODEqueryEtryPt_TXIF_OMOD_QUERIES \ + else if(!strcmp((char*) name, "beginTransaction")) {\ + *pEtryPoint = beginTransaction;\ + } else if(!strcmp((char*) name, "endTransaction")) {\ + *pEtryPoint = endTransaction;\ + } + /* the following definition is the standard block for queryEtryPt for INPUT * modules. This can be used if no specific handling (e.g. to cover version * differences) is needed. @@ -393,6 +437,32 @@ finalize_it:\ } +/* now come some check functions, which enable a standard way of obtaining feature + * information from the core. feat is the to-be-tested feature and featVar is a + * variable that receives the result (0-not support, 1-supported). + * This must be a macro, so that it is put into the output's code. Otherwise, we + * would need to rely on a library entry point, which is what we intend to avoid ;) + * rgerhards, 2009-04-27 + */ +#define INITChkCoreFeature(featVar, feat) \ +{ \ + rsRetVal MACRO_Ret; \ + rsRetVal (*pQueryCoreFeatureSupport)(int*, unsigned); \ + int bSupportsIt; \ + featVar = 0; \ + MACRO_Ret = pHostQueryEtryPt((uchar*)"queryCoreFeatureSupport", &pQueryCoreFeatureSupport); \ + if(MACRO_Ret == RS_RET_OK) { \ + /* found entry point, so let's see if core supports it */ \ + CHKiRet((*pQueryCoreFeatureSupport)(&bSupportsIt, feat)); \ + if(bSupportsIt) \ + featVar = 1; \ + } else if(MACRO_Ret != RS_RET_ENTRY_POINT_NOT_FOUND) { \ + ABORT_FINALIZE(MACRO_Ret); /* Something else went wrong, what is not acceptable */ \ + } \ +} + + + /* definitions for host API queries */ #define CODEmodInit_QueryRegCFSLineHdlr \ CHKiRet(pHostQueryEtryPt((uchar*)"regCfSysLineHdlr", &omsdRegCFSLineHdlr)); @@ -481,6 +551,33 @@ static rsRetVal afterRun(void)\ } -/* - * vi:set ai: +/* doHUP() + * This function is optional. Currently, it is available to output plugins + * only, but may be made available to other types of plugins in the future. + * A plugin does not need to define this entry point. If if does, it gets + * called when a non-restart type of HUP is done. A plugin should register + * this function so that it can close files, connection or other ressources + * on HUP - if it can be assume the user wanted to do this as a part of HUP + * processing. Note that the name "HUP" has historical reasons, it stems back + * to the infamous SIGHUP which was sent to restart a syslogd. We still retain + * that legacy, but may move this to a different signal. + * rgerhards, 2008-10-22 + */ +#define CODEqueryEtryPt_doHUP \ + else if(!strcmp((char*) name, "doHUP")) {\ + *pEtryPoint = doHUP;\ + } +#define BEGINdoHUP \ +static rsRetVal doHUP(instanceData __attribute__((unused)) *pData)\ +{\ + DEFiRet; + +#define CODESTARTdoHUP + +#define ENDdoHUP \ + RETiRet;\ +} + + +/* vim:set ai: */ diff --git a/runtime/modules.c b/runtime/modules.c index d5730ede..32ae659f 100644 --- a/runtime/modules.c +++ b/runtime/modules.c @@ -40,6 +40,7 @@ #include <time.h> #include <assert.h> #include <errno.h> +#include <pthread.h> #ifdef OS_BSD # include "libgen.h" #endif @@ -49,6 +50,10 @@ #include <unistd.h> #include <sys/file.h> +#ifdef OS_SOLARIS +# define PATH_MAX MAXPATHLEN +#endif + #include "cfsysline.h" #include "modules.h" #include "errmsg.h" @@ -57,6 +62,14 @@ DEFobjStaticHelpers DEFobjCurrIf(errmsg) +/* we must ensure that only one thread at one time tries to load or unload + * modules, otherwise we may see race conditions. This first came up with + * imdiag/imtcp, which both use the same stream drivers. Below is the mutex + * for that handling. + * rgerhards, 2009-05-25 + */ +static pthread_mutex_t mutLoadUnload; + static modInfo_t *pLoadedModules = NULL; /* list of currently-loaded modules */ static modInfo_t *pLoadedModulesLast = NULL; /* tail-pointer */ @@ -221,6 +234,8 @@ static rsRetVal queryHostEtryPt(uchar *name, rsRetVal (**pEtryPoint)()) *pEtryPoint = regCfSysLineHdlr; } else if(!strcmp((char*) name, "objGetObjInterface")) { *pEtryPoint = objGetObjInterface; + } else if(!strcmp((char*) name, "OMSRgetSupportedTplOpts")) { + *pEtryPoint = OMSRgetSupportedTplOpts; } else { *pEtryPoint = NULL; /* to be on the safe side */ ABORT_FINALIZE(RS_RET_ENTRY_POINT_NOT_FOUND); @@ -347,6 +362,7 @@ static rsRetVal doModInit(rsRetVal (*modInit)(int, int*, rsRetVal(**)(), rsRetVal(*)(), modInfo_t*), uchar *name, void *pModHdlr) { DEFiRet; + rsRetVal localRet; modInfo_t *pNew = NULL; rsRetVal (*modGetType)(eModType_t *pType); @@ -391,6 +407,10 @@ doModInit(rsRetVal (*modInit)(int, int*, rsRetVal(**)(), rsRetVal(*)(), modInfo_ CHKiRet((*pNew->modQueryEtryPt)((uchar*)"parseSelectorAct", &pNew->mod.om.parseSelectorAct)); CHKiRet((*pNew->modQueryEtryPt)((uchar*)"isCompatibleWithFeature", &pNew->isCompatibleWithFeature)); CHKiRet((*pNew->modQueryEtryPt)((uchar*)"tryResume", &pNew->tryResume)); + /* try load optional interfaces */ + localRet = (*pNew->modQueryEtryPt)((uchar*)"doHUP", &pNew->doHUP); + if(localRet != RS_RET_OK && localRet != RS_RET_MODULE_ENTRY_POINT_NOT_FOUND) + ABORT_FINALIZE(localRet); break; case eMOD_LIB: break; @@ -468,6 +488,8 @@ modUnlinkAndDestroy(modInfo_t **ppThis) pThis = *ppThis; assert(pThis != NULL); + pthread_mutex_lock(&mutLoadUnload); + /* first check if we are permitted to unload */ if(pThis->eType == eMOD_LIB) { if(pThis->uRefCnt > 0) { @@ -502,6 +524,7 @@ modUnlinkAndDestroy(modInfo_t **ppThis) moduleDestruct(pThis); finalize_it: + pthread_mutex_unlock(&mutLoadUnload); RETiRet; } @@ -576,6 +599,8 @@ Load(uchar *pModName) assert(pModName != NULL); dbgprintf("Requested to load module '%s'\n", pModName); + pthread_mutex_lock(&mutLoadUnload); + iModNameLen = strlen((char *) pModName); if(iModNameLen > 3 && !strcmp((char *) pModName + iModNameLen - 3, ".so")) { iModNameLen -= 3; @@ -599,7 +624,7 @@ Load(uchar *pModName) iLoadCnt = 0; do { /* now build our load module name */ - if(*pModName == '/') { + if(*pModName == '/' || *pModName == '.') { *szPath = '\0'; /* we do not need to append the path - its already in the module name */ iPathLen = 0; } else { @@ -685,6 +710,7 @@ Load(uchar *pModName) } finalize_it: + pthread_mutex_unlock(&mutLoadUnload); RETiRet; } @@ -780,6 +806,15 @@ BEGINObjClassExit(module, OBJ_IS_LOADABLE_MODULE) /* CHANGE class also in END MA CODESTARTObjClassExit(module) /* release objects we no longer need */ objRelease(errmsg, CORE_COMPONENT); + /* We have a problem in our reference counting, which leads to this function + * being called too early. This usually is no problem, but if we destroy + * the mutex object, we get into trouble. So rather than finding the root cause, + * we do not release the mutex right now and have a very, very slight leak. + * We know that otherwise no bad effects happen, so this acceptable for the + * time being. -- rgerhards, 2009-05-25 + * + * TODO: add again: pthread_mutex_destroy(&mutLoadUnload); + */ # ifdef DEBUG modUsrPrintAll(); /* debug aid - TODO: integrate with debug.c, at least the settings! */ @@ -822,6 +857,7 @@ ENDobjQueryInterface(module) */ BEGINAbstractObjClassInit(module, 1, OBJ_IS_CORE_MODULE) /* class, version - CHANGE class also in END MACRO! */ uchar *pModPath; + pthread_mutexattr_t mutAttr; /* use any module load path specified in the environment */ if((pModPath = (uchar*) getenv("RSYSLOG_MODDIR")) != NULL) { @@ -839,6 +875,10 @@ BEGINAbstractObjClassInit(module, 1, OBJ_IS_CORE_MODULE) /* class, version - CHA SetModDir(glblModPath); } + pthread_mutexattr_init(&mutAttr); + pthread_mutexattr_settype(&mutAttr, PTHREAD_MUTEX_RECURSIVE); + pthread_mutex_init(&mutLoadUnload, &mutAttr); + /* request objects we use */ CHKiRet(objUse(errmsg, CORE_COMPONENT)); ENDObjClassInit(module) diff --git a/runtime/modules.h b/runtime/modules.h index 7d34bcf7..372529ee 100644 --- a/runtime/modules.h +++ b/runtime/modules.h @@ -44,8 +44,11 @@ * rgerhards, 2008-03-04 * version 3 adds modInfo_t ptr to call of modInit -- rgerhards, 2008-03-10 * version 4 removes needUDPSocket OM callback -- rgerhards, 2008-03-22 + * version 5 changes the way parsing works for input modules. This is + * an important change, parseAndSubmitMessage() goes away. Other + * module types are not affected. -- rgerhards, 2008-10-09 */ -#define CURR_MOD_IF_VERSION 4 +#define CURR_MOD_IF_VERSION 5 typedef enum eModType_ { eMOD_IN, /* input module */ @@ -88,6 +91,7 @@ typedef struct modInfo_s { rsRetVal (*tryResume)(void*);/* called to see if module actin can be resumed now */ rsRetVal (*modExit)(void); /* called before termination or module unload */ rsRetVal (*modGetID)(void **); /* get its unique ID from module */ + rsRetVal (*doHUP)(void *); /* non-restart type HUP handler */ /* below: parse a configuration line - return if processed * or not. If not, must be parsed to next module. */ diff --git a/runtime/msg.c b/runtime/msg.c index 375b9861..e26fe5ee 100644 --- a/runtime/msg.c +++ b/runtime/msg.c @@ -45,6 +45,7 @@ #include "glbl.h" #include "regexp.h" #include "atomic.h" +#include "unicode-helper.h" /* static data */ DEFobjStaticHelpers @@ -103,6 +104,7 @@ static syslogCODE rs_facilitynames[] = /* some forward declarations */ static int getAPPNAMELen(msg_t *pM); +static int getProtocolVersion(msg_t *pM); /* The following functions will support advanced output module * multithreading, once this is implemented. Currently, we @@ -140,8 +142,8 @@ void (*funcMsgPrepareEnqueue)(msg_t *pMsg); #define MsgLock(pMsg) funcLock(pMsg) #define MsgUnlock(pMsg) funcUnlock(pMsg) #else -#define MsgLock(pMsg) {dbgprintf("line %d\n - ", __LINE__); funcLock(pMsg);; } -#define MsgUnlock(pMsg) {dbgprintf("line %d - ", __LINE__); funcUnlock(pMsg); } +#define MsgLock(pMsg) {dbgprintf("MsgLock line %d\n - ", __LINE__); funcLock(pMsg);; } +#define MsgUnlock(pMsg) {dbgprintf("MsgUnlock line %d - ", __LINE__); funcUnlock(pMsg); } #endif /* the next function is a dummy to be used by the looking functions @@ -242,12 +244,21 @@ rsRetVal MsgEnableThreadSafety(void) /* end locking functions */ -/* "Constructor" for a msg "object". Returns a pointer to +/* This is common code for all Constructors. It is defined in an + * inline'able function so that we can save a function call in the + * actual constructors (otherwise, the msgConstruct would need + * to call msgConstructWithTime(), which would require a + * function call). Now, both can use this inline function. This + * enables us to be optimal, but still have the code just once. * the new object or NULL if no such object could be allocated. * An object constructed via this function should only be destroyed - * via "msgDestruct()". + * via "msgDestruct()". This constructor does not query system time + * itself but rather uses a user-supplied value. This enables the caller + * to do some tricks to save processing time (done, for example, in the + * udp input). + * rgerhards, 2008-10-06 */ -rsRetVal msgConstruct(msg_t **ppThis) +static inline rsRetVal msgBaseConstruct(msg_t **ppThis) { DEFiRet; msg_t *pM; @@ -260,21 +271,59 @@ rsRetVal msgConstruct(msg_t **ppThis) pM->iRefCount = 1; pM->iSeverity = -1; pM->iFacility = -1; + objConstructSetObjInfo(pM); + + /* DEV debugging only! dbgprintf("msgConstruct\t0x%x, ref 1\n", (int)pM);*/ + + *ppThis = pM; +finalize_it: + RETiRet; +} + + +/* "Constructor" for a msg "object". Returns a pointer to + * the new object or NULL if no such object could be allocated. + * An object constructed via this function should only be destroyed + * via "msgDestruct()". This constructor does not query system time + * itself but rather uses a user-supplied value. This enables the caller + * to do some tricks to save processing time (done, for example, in the + * udp input). + * rgerhards, 2008-10-06 + */ +rsRetVal msgConstructWithTime(msg_t **ppThis, struct syslogTime *stTime, time_t ttGenTime) +{ + DEFiRet; + + CHKiRet(msgBaseConstruct(ppThis)); + (*ppThis)->ttGenTime = ttGenTime; + memcpy(&(*ppThis)->tRcvdAt, stTime, sizeof(struct syslogTime)); + memcpy(&(*ppThis)->tTIMESTAMP, stTime, sizeof(struct syslogTime)); + +finalize_it: + RETiRet; +} + + +/* "Constructor" for a msg "object". Returns a pointer to + * the new object or NULL if no such object could be allocated. + * An object constructed via this function should only be destroyed + * via "msgDestruct()". This constructor, for historical reasons, + * also sets the two timestamps to the current time. + */ +rsRetVal msgConstruct(msg_t **ppThis) +{ + DEFiRet; + + CHKiRet(msgBaseConstruct(ppThis)); /* we initialize both timestamps to contain the current time, so that they * are consistent. Also, this saves us from doing any further time calls just * to obtain a timestamp. The memcpy() should not really make a difference, * especially as I think there is no codepath currently where it would not be * required (after I have cleaned up the pathes ;)). -- rgerhards, 2008-10-02 */ - datetime.getCurrTime(&(pM->tRcvdAt)); - memcpy(&pM->tTIMESTAMP, &pM->tRcvdAt, sizeof(struct syslogTime)); - - objConstructSetObjInfo(pM); - - /* DEV debugging only! dbgprintf("msgConstruct\t0x%x, ref 1\n", (int)pM);*/ - - *ppThis = pM; + datetime.getCurrTime(&((*ppThis)->tRcvdAt), &((*ppThis)->ttGenTime)); + memcpy(&(*ppThis)->tTIMESTAMP, &(*ppThis)->tRcvdAt, sizeof(struct syslogTime)); finalize_it: RETiRet; @@ -294,52 +343,27 @@ CODESTARTobjDestruct(msg) if(currRefCount == 0) { /* DEV Debugging Only! dbgprintf("msgDestruct\t0x%lx, RefCount now 0, doing DESTROY\n", (unsigned long)pThis); */ - if(pThis->pszUxTradMsg != NULL) - free(pThis->pszUxTradMsg); - if(pThis->pszRawMsg != NULL) - free(pThis->pszRawMsg); - if(pThis->pszTAG != NULL) - free(pThis->pszTAG); - if(pThis->pszHOSTNAME != NULL) - free(pThis->pszHOSTNAME); - if(pThis->pszInputName != NULL) - free(pThis->pszInputName); - if(pThis->pszRcvFrom != NULL) - free(pThis->pszRcvFrom); - if(pThis->pszRcvFromIP != NULL) - free(pThis->pszRcvFromIP); - if(pThis->pszMSG != NULL) - free(pThis->pszMSG); - if(pThis->pszFacility != NULL) - free(pThis->pszFacility); - if(pThis->pszFacilityStr != NULL) - free(pThis->pszFacilityStr); - if(pThis->pszSeverity != NULL) - free(pThis->pszSeverity); - if(pThis->pszSeverityStr != NULL) - free(pThis->pszSeverityStr); - if(pThis->pszRcvdAt3164 != NULL) - free(pThis->pszRcvdAt3164); - if(pThis->pszRcvdAt3339 != NULL) - free(pThis->pszRcvdAt3339); - if(pThis->pszRcvdAt_SecFrac != NULL) - free(pThis->pszRcvdAt_SecFrac); - if(pThis->pszRcvdAt_MySQL != NULL) - free(pThis->pszRcvdAt_MySQL); - if(pThis->pszRcvdAt_PgSQL != NULL) - free(pThis->pszRcvdAt_PgSQL); - if(pThis->pszTIMESTAMP3164 != NULL) - free(pThis->pszTIMESTAMP3164); - if(pThis->pszTIMESTAMP3339 != NULL) - free(pThis->pszTIMESTAMP3339); - if(pThis->pszTIMESTAMP_SecFrac != NULL) - free(pThis->pszTIMESTAMP_SecFrac); - if(pThis->pszTIMESTAMP_MySQL != NULL) - free(pThis->pszTIMESTAMP_MySQL); - if(pThis->pszTIMESTAMP_PgSQL != NULL) - free(pThis->pszTIMESTAMP_PgSQL); - if(pThis->pszPRI != NULL) - free(pThis->pszPRI); + free(pThis->pszRawMsg); + free(pThis->pszTAG); + free(pThis->pszHOSTNAME); + free(pThis->pszInputName); + free(pThis->pszRcvFrom); + free(pThis->pszRcvFromIP); + free(pThis->pszMSG); + free(pThis->pszFacility); + free(pThis->pszFacilityStr); + free(pThis->pszSeverity); + free(pThis->pszSeverityStr); + free(pThis->pszRcvdAt3164); + free(pThis->pszRcvdAt3339); + free(pThis->pszRcvdAt_SecFrac); + free(pThis->pszRcvdAt_MySQL); + free(pThis->pszRcvdAt_PgSQL); + free(pThis->pszTIMESTAMP3164); + free(pThis->pszTIMESTAMP3339); + free(pThis->pszTIMESTAMP_SecFrac); + free(pThis->pszTIMESTAMP_MySQL); + free(pThis->pszTIMESTAMP_PgSQL); if(pThis->pCSProgName != NULL) rsCStrDestruct(&pThis->pCSProgName); if(pThis->pCSStrucData != NULL) @@ -402,7 +426,7 @@ msg_t* MsgDup(msg_t* pOld) assert(pOld != NULL); BEGINfunc - if(msgConstruct(&pNew) != RS_RET_OK) { + if(msgConstructWithTime(&pNew, &pOld->tTIMESTAMP, pOld->ttGenTime) != RS_RET_OK) { return NULL; } @@ -413,16 +437,19 @@ msg_t* MsgDup(msg_t* pOld) pNew->bParseHOSTNAME = pOld->bParseHOSTNAME; pNew->msgFlags = pOld->msgFlags; pNew->iProtocolVersion = pOld->iProtocolVersion; - memcpy(&pNew->tRcvdAt, &pOld->tRcvdAt, sizeof(struct syslogTime)); - memcpy(&pNew->tTIMESTAMP, &pOld->tTIMESTAMP, sizeof(struct syslogTime)); + pNew->ttGenTime = pOld->ttGenTime; + /* enable this, if someone actually uses UxTradMsg, delete after some time has + * passed and nobody complained -- rgerhards, 2009-06-16 + pNew->offAfterPRI = pOld->offAfterPRI; + */ + memcpy(pNew->bufPRI, pOld->bufPRI, pOld->iLenPRI); + pNew->iLenPRI = pOld->iLenPRI; tmpCOPYSZ(Severity); tmpCOPYSZ(SeverityStr); tmpCOPYSZ(Facility); tmpCOPYSZ(FacilityStr); - tmpCOPYSZ(PRI); tmpCOPYSZ(RawMsg); tmpCOPYSZ(MSG); - tmpCOPYSZ(UxTradMsg); tmpCOPYSZ(TAG); tmpCOPYSZ(HOSTNAME); tmpCOPYSZ(RcvFrom); @@ -468,12 +495,16 @@ static rsRetVal MsgSerialize(msg_t *pThis, strm_t *pStrm) objSerializeSCALAR(pStrm, iSeverity, SHORT); objSerializeSCALAR(pStrm, iFacility, SHORT); objSerializeSCALAR(pStrm, msgFlags, INT); + objSerializeSCALAR(pStrm, ttGenTime, INT); objSerializeSCALAR(pStrm, tRcvdAt, SYSLOGTIME); objSerializeSCALAR(pStrm, tTIMESTAMP, SYSLOGTIME); + /* enable this, if someone actually uses UxTradMsg, delete after some time has + * passed and nobody complained -- rgerhards, 2009-06-16 + objSerializeSCALAR(pStrm, offsAfterPRI, SHORT); + */ objSerializePTR(pStrm, pszRawMsg, PSZ); objSerializePTR(pStrm, pszMSG, PSZ); - objSerializePTR(pStrm, pszUxTradMsg, PSZ); objSerializePTR(pStrm, pszTAG, PSZ); objSerializePTR(pStrm, pszHOSTNAME, PSZ); objSerializePTR(pStrm, pszInputName, PSZ); @@ -564,7 +595,7 @@ static rsRetVal aquirePROCIDFromTAG(msg_t *pM) } /* OK, finaally we could obtain a PROCID. So let's use it ;) */ - CHKiRet(rsCStrFinish(pM->pCSPROCID)); + CHKiRet(cstrFinalize(pM->pCSPROCID)); finalize_it: RETiRet; @@ -606,7 +637,7 @@ static rsRetVal aquireProgramName(msg_t *pM) ; ++i) { CHKiRet(rsCStrAppendChar(pM->pCSProgName, pM->pszTAG[i])); } - CHKiRet(rsCStrFinish(pM->pCSProgName)); + CHKiRet(cstrFinalize(pM->pCSProgName)); } finalize_it: RETiRet; @@ -647,7 +678,7 @@ void setProtocolVersion(msg_t *pM, int iNewVersion) pM->iProtocolVersion = iNewVersion; } -int getProtocolVersion(msg_t *pM) +static int getProtocolVersion(msg_t *pM) { assert(pM != NULL); return(pM->iProtocolVersion); @@ -666,7 +697,7 @@ int getMSGLen(msg_t *pM) } -char *getRawMsg(msg_t *pM) +static char *getRawMsg(msg_t *pM) { if(pM == NULL) return ""; @@ -677,16 +708,17 @@ char *getRawMsg(msg_t *pM) return (char*)pM->pszRawMsg; } + +/* enable this, if someone actually uses UxTradMsg, delete after some time has + * passed and nobody complained -- rgerhards, 2009-06-16 char *getUxTradMsg(msg_t *pM) { if(pM == NULL) return ""; else - if(pM->pszUxTradMsg == NULL) - return ""; - else - return (char*)pM->pszUxTradMsg; + return (char*)pM->pszRawMsg + pM->offAfterPRI; } +*/ char *getMSG(msg_t *pM) { @@ -700,43 +732,36 @@ char *getMSG(msg_t *pM) } -/* Get PRI value in text form */ -char *getPRI(msg_t *pM) +/* Get PRI value as integer */ +static int getPRIi(msg_t *pM) { - int pri; + assert(pM != NULL); + return (pM->iFacility << 3) + (pM->iSeverity); +} + +/* Get PRI value in text form */ +static inline char *getPRI(msg_t *pM) +{ if(pM == NULL) return ""; + /* there are some cases where bufPRI may not contain a valid string, + * and then we need to build it. + */ MsgLock(pM); - if(pM->pszPRI == NULL) { - /* OK, we need to construct it... we use a 5 byte buffer - as of - * RFC 3164, it can't be longer. Should it still be, snprintf will truncate... - * Note that we do not use the LOG_MAKEPRI macro. This macro - * is a simple add of the two values under FreeBSD 7. So we implement - * the logic in our own code. This is a change from a bug - * report. -- rgerhards, 2008-07-14 - */ - pri = pM->iFacility * 8 + pM->iSeverity; - if((pM->pszPRI = malloc(5)) == NULL) return ""; - pM->iLenPRI = snprintf((char*)pM->pszPRI, 5, "%d", pri); + if(pM->bufPRI[0] == '\0') { + snprintf((char*)pM->bufPRI, sizeof(pM->bufPRI), "%d", getPRIi(pM)); } MsgUnlock(pM); - return (char*)pM->pszPRI; -} - - -/* Get PRI value as integer */ -int getPRIi(msg_t *pM) -{ - assert(pM != NULL); - return (pM->iFacility << 3) + (pM->iSeverity); + return (char*)pM->bufPRI; } -char *getTimeReported(msg_t *pM, enum tplFormatTypes eFmt) +static inline char *getTimeReported(msg_t *pM, enum tplFormatTypes eFmt) { + BEGINfunc if(pM == NULL) return ""; @@ -808,11 +833,13 @@ char *getTimeReported(msg_t *pM, enum tplFormatTypes eFmt) MsgUnlock(pM); return(pM->pszTIMESTAMP_SecFrac); } + ENDfunc return "INVALID eFmt OPTION!"; } -char *getTimeGenerated(msg_t *pM, enum tplFormatTypes eFmt) +static inline char *getTimeGenerated(msg_t *pM, enum tplFormatTypes eFmt) { + BEGINfunc if(pM == NULL) return ""; @@ -884,11 +911,12 @@ char *getTimeGenerated(msg_t *pM, enum tplFormatTypes eFmt) MsgUnlock(pM); return(pM->pszRcvdAt_SecFrac); } + ENDfunc return "INVALID eFmt OPTION!"; } -char *getSeverity(msg_t *pM) +static inline char *getSeverity(msg_t *pM) { if(pM == NULL) return ""; @@ -905,7 +933,7 @@ char *getSeverity(msg_t *pM) } -char *getSeverityStr(msg_t *pM) +static inline char *getSeverityStr(msg_t *pM) { syslogCODE *c; int val; @@ -935,7 +963,7 @@ char *getSeverityStr(msg_t *pM) return((char*)pM->pszSeverityStr); } -char *getFacility(msg_t *pM) +static inline char *getFacility(msg_t *pM) { if(pM == NULL) return ""; @@ -954,7 +982,7 @@ char *getFacility(msg_t *pM) return((char*)pM->pszFacility); } -char *getFacilityStr(msg_t *pM) +static inline char *getFacilityStr(msg_t *pM) { syslogCODE *c; int val; @@ -1006,6 +1034,17 @@ MsgSetFlowControlType(msg_t *pMsg, flowControl_t eFlowCtl) RETiRet; } +/* set offset after which PRI in raw msg starts + * rgerhards, 2009-06-16 + */ +rsRetVal +MsgSetAfterPRIOffs(msg_t *pMsg, short offs) +{ + assert(pMsg != NULL); + pMsg->offAfterPRI = offs; + return RS_RET_OK; +} + /* rgerhards 2004-11-24: set APP-NAME in msg object * TODO: revisit msg locking code! @@ -1061,7 +1100,7 @@ finalize_it: /* rgerhards, 2005-11-24 */ -int getPROCIDLen(msg_t *pM) +static inline int getPROCIDLen(msg_t *pM) { assert(pM != NULL); MsgLock(pM); @@ -1106,19 +1145,10 @@ finalize_it: RETiRet; } -/* rgerhards, 2005-11-24 - */ -#if 0 /* This method is currently not called, be we like to preserve it */ -static int getMSGIDLen(msg_t *pM) -{ - return (pM->pCSMSGID == NULL) ? 1 : rsCStrLen(pM->pCSMSGID); -} -#endif - /* rgerhards, 2005-11-24 */ -char *getMSGID(msg_t *pM) +static inline char *getMSGID(msg_t *pM) { return (pM->pCSMSGID == NULL) ? "-" : (char*) rsCStrGetSzStrNoNULL(pM->pCSMSGID); } @@ -1142,8 +1172,7 @@ void MsgAssignTAG(msg_t *pMsg, uchar *pBuf) void MsgSetTAG(msg_t *pMsg, char* pszTAG) { assert(pMsg != NULL); - if(pMsg->pszTAG != NULL) - free(pMsg->pszTAG); + free(pMsg->pszTAG); pMsg->iLenTAG = strlen(pszTAG); if((pMsg->pszTAG = malloc(pMsg->iLenTAG + 1)) != NULL) memcpy(pMsg->pszTAG, pszTAG, pMsg->iLenTAG + 1); @@ -1200,7 +1229,7 @@ static int getTAGLen(msg_t *pM) #endif -char *getTAG(msg_t *pM) +static inline char *getTAG(msg_t *pM) { char *ret; @@ -1243,7 +1272,7 @@ char *getHOSTNAME(msg_t *pM) } -uchar *getInputName(msg_t *pM) +static uchar *getInputName(msg_t *pM) { if(pM == NULL) return (uchar*) ""; @@ -1255,15 +1284,15 @@ uchar *getInputName(msg_t *pM) } -char *getRcvFrom(msg_t *pM) +uchar *getRcvFrom(msg_t *pM) { if(pM == NULL) - return ""; + return UCHAR_CONSTANT(""); else if(pM->pszRcvFrom == NULL) - return ""; + return UCHAR_CONSTANT(""); else - return (char*) pM->pszRcvFrom; + return pM->pszRcvFrom; } @@ -1310,7 +1339,7 @@ static int getStructuredDataLen(msg_t *pM) /* get the "STRUCTURED-DATA" as sz string * rgerhards, 2005-11-24 */ -char *getStructuredData(msg_t *pM) +static inline char *getStructuredData(msg_t *pM) { return (pM->pCSStrucData == NULL) ? "-" : (char*) rsCStrGetSzStrNoNULL(pM->pCSStrucData); } @@ -1436,14 +1465,13 @@ static int getAPPNAMELen(msg_t *pM) } /* rgerhards 2008-09-10: set pszInputName in msg object + * rgerhards, 2009-06-16 */ -void MsgSetInputName(msg_t *pMsg, char* pszInputName) +void MsgSetInputName(msg_t *pMsg, uchar* pszInputName, size_t lenInputName) { assert(pMsg != NULL); - if(pMsg->pszInputName != NULL) - free(pMsg->pszInputName); - - pMsg->iLenInputName = strlen(pszInputName); + free(pMsg->pszInputName); + pMsg->iLenInputName = lenInputName; if((pMsg->pszInputName = malloc(pMsg->iLenInputName + 1)) != NULL) { memcpy(pMsg->pszInputName, pszInputName, pMsg->iLenInputName + 1); } @@ -1451,13 +1479,12 @@ void MsgSetInputName(msg_t *pMsg, char* pszInputName) /* rgerhards 2004-11-16: set pszRcvFrom in msg object */ -void MsgSetRcvFrom(msg_t *pMsg, char* pszRcvFrom) +void MsgSetRcvFrom(msg_t *pMsg, uchar* pszRcvFrom) { assert(pMsg != NULL); - if(pMsg->pszRcvFrom != NULL) - free(pMsg->pszRcvFrom); + free(pMsg->pszRcvFrom); - pMsg->iLenRcvFrom = strlen(pszRcvFrom); + pMsg->iLenRcvFrom = ustrlen(pszRcvFrom); if((pMsg->pszRcvFrom = malloc(pMsg->iLenRcvFrom + 1)) != NULL) { memcpy(pMsg->pszRcvFrom, pszRcvFrom, pMsg->iLenRcvFrom + 1); } @@ -1508,51 +1535,16 @@ void MsgAssignHOSTNAME(msg_t *pMsg, char *pBuf) * we need it. The rest of the code already knows how to handle an * unset HOSTNAME. */ -void MsgSetHOSTNAME(msg_t *pMsg, char* pszHOSTNAME) +void MsgSetHOSTNAME(msg_t *pMsg, uchar* pszHOSTNAME) { assert(pMsg != NULL); - if(pMsg->pszHOSTNAME != NULL) - free(pMsg->pszHOSTNAME); + free(pMsg->pszHOSTNAME); - pMsg->iLenHOSTNAME = strlen(pszHOSTNAME); + pMsg->iLenHOSTNAME = ustrlen(pszHOSTNAME); if((pMsg->pszHOSTNAME = malloc(pMsg->iLenHOSTNAME + 1)) != NULL) memcpy(pMsg->pszHOSTNAME, pszHOSTNAME, pMsg->iLenHOSTNAME + 1); else - dbgprintf("Could not allocate memory in MsgSetHOSTNAME()\n"); -} - - -/* Set the UxTradMsg to a caller-provided string. This is thought - * to be a heap buffer that the caller will no longer use. This - * function is a performance optimization over MsgSetUxTradMsg(). - * rgerhards 2004-11-19 - */ -#if 0 /* This method is currently not called, be we like to preserve it */ -static void MsgAssignUxTradMsg(msg_t *pMsg, char *pBuf) -{ - assert(pMsg != NULL); - assert(pBuf != NULL); - pMsg->iLenUxTradMsg = strlen(pBuf); - pMsg->pszUxTradMsg = pBuf; -} -#endif - - -/* rgerhards 2004-11-17: set the traditional Unix message in msg object - */ -int MsgSetUxTradMsg(msg_t *pMsg, char* pszUxTradMsg) -{ - assert(pMsg != NULL); - assert(pszUxTradMsg != NULL); - pMsg->iLenUxTradMsg = strlen(pszUxTradMsg); - if(pMsg->pszUxTradMsg != NULL) - free(pMsg->pszUxTradMsg); - if((pMsg->pszUxTradMsg = malloc(pMsg->iLenUxTradMsg + 1)) != NULL) - memcpy(pMsg->pszUxTradMsg, pszUxTradMsg, pMsg->iLenUxTradMsg + 1); - else - dbgprintf("Could not allocate memory for pszUxTradMsg buffer."); - - return(0); + DBGPRINTF("Could not allocate memory in MsgSetHOSTNAME()\n"); } @@ -1631,7 +1623,7 @@ static uchar *getNOW(eNOWType eNow) return NULL; } - datetime.getCurrTime(&t); + datetime.getCurrTime(&t, NULL); switch(eNow) { case NOW_NOW: snprintf((char*) pBuf, tmpBUFSIZE, "%4.4d-%2.2d-%2.2d", t.year, t.month, t.day); @@ -1734,12 +1726,15 @@ char *MsgGetProp(msg_t *pMsg, struct templateEntry *pTpe, pRes = getMSG(pMsg); } else if(!strcmp((char*) pName, "rawmsg")) { pRes = getRawMsg(pMsg); + /* enable this, if someone actually uses UxTradMsg, delete after some time has + * passed and nobody complained -- rgerhards, 2009-06-16 } else if(!strcmp((char*) pName, "uxtradmsg")) { pRes = getUxTradMsg(pMsg); + */ } else if(!strcmp((char*) pName, "inputname")) { pRes = (char*) getInputName(pMsg); } else if(!strcmp((char*) pName, "fromhost")) { - pRes = getRcvFrom(pMsg); + pRes = (char*) getRcvFrom(pMsg); } else if(!strcmp((char*) pName, "fromhost-ip")) { pRes = (char*) getRcvFromIP(pMsg); } else if(!strcmp((char*) pName, "source") || !strcmp((char*) pName, "hostname")) { @@ -2356,6 +2351,40 @@ char *MsgGetProp(msg_t *pMsg, struct templateEntry *pTpe, } } + /* finally, we need to check if the property should be formatted in CSV + * format (we use RFC 4180, and always use double quotes). As of this writing, + * this should be the last action carried out on the property, but in the + * future there may be reasons to change that. -- rgerhards, 2009-04-02 + */ + if(pTpe->data.field.options.bCSV) { + /* we need to obtain a private copy, as we need to at least add the double quotes */ + int iBufLen = strlen(pRes); + char *pBStart; + char *pDst; + char *pSrc; + /* the malloc may be optimized, we currently use the worst case... */ + pBStart = pDst = malloc((2 * iBufLen + 3) * sizeof(char)); + if(pDst == NULL) { + if(*pbMustBeFreed == 1) + free(pRes); + *pbMustBeFreed = 0; + return "**OUT OF MEMORY**"; + } + pSrc = pRes; + *pDst++ = '"'; /* starting quote */ + while(*pSrc) { + if(*pSrc == '"') + *pDst++ = '"'; /* need to add double double quote (see RFC4180) */ + *pDst++ = *pSrc++; + } + *pDst++ = '"'; /* ending quote */ + *pDst = '\0'; + if(*pbMustBeFreed == 1) + free(pRes); + pRes = pBStart; + *pbMustBeFreed = 1; + } + /*dbgprintf("MsgGetProp(\"%s\"): \"%s\"\n", pName, pRes); only for verbose debug logging */ return(pRes); } @@ -2425,20 +2454,25 @@ rsRetVal MsgSetProperty(msg_t *pThis, var_t *pProp) pThis->msgFlags = pProp->val.num; } else if(isProp("pszRawMsg")) { MsgSetRawMsg(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); + /* enable this, if someone actually uses UxTradMsg, delete after some time has + * passed and nobody complained -- rgerhards, 2009-06-16 + } else if(isProp("offAfterPRI")) { + pThis->offAfterPRI = pProp->val.num; + */ } else if(isProp("pszMSG")) { MsgSetMSG(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); } else if(isProp("pszUxTradMsg")) { - MsgSetUxTradMsg(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); + /*IGNORE*/; /* this *was* a property, but does no longer exist */ } else if(isProp("pszTAG")) { MsgSetTAG(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); } else if(isProp("pszInputName")) { - MsgSetInputName(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); + MsgSetInputName(pThis, rsCStrGetSzStrNoNULL(pProp->val.pStr), rsCStrLen(pProp->val.pStr)); } else if(isProp("pszRcvFromIP")) { MsgSetRcvFromIP(pThis, rsCStrGetSzStrNoNULL(pProp->val.pStr)); } else if(isProp("pszRcvFrom")) { - MsgSetRcvFrom(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); + MsgSetRcvFrom(pThis, rsCStrGetSzStrNoNULL(pProp->val.pStr)); } else if(isProp("pszHOSTNAME")) { - MsgSetHOSTNAME(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); + MsgSetHOSTNAME(pThis, rsCStrGetSzStrNoNULL(pProp->val.pStr)); } else if(isProp("pCSStrucData")) { MsgSetStructuredData(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); } else if(isProp("pCSAPPNAME")) { @@ -2447,6 +2481,8 @@ rsRetVal MsgSetProperty(msg_t *pThis, var_t *pProp) MsgSetPROCID(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); } else if(isProp("pCSMSGID")) { MsgSetMSGID(pThis, (char*) rsCStrGetSzStrNoNULL(pProp->val.pStr)); + } else if(isProp("ttGenTime")) { + pThis->ttGenTime = pProp->val.num; } else if(isProp("tRcvdAt")) { memcpy(&pThis->tRcvdAt, &pProp->val.vSyslogTime, sizeof(struct syslogTime)); } else if(isProp("tTIMESTAMP")) { @@ -2508,7 +2544,5 @@ BEGINObjClassInit(msg, 1, OBJ_IS_CORE_MODULE) funcDeleteMutex = MsgLockingDummy; funcMsgPrepareEnqueue = MsgLockingDummy; ENDObjClassInit(msg) - -/* - * vi:set ai: +/* vim:set ai: */ diff --git a/runtime/msg.h b/runtime/msg.h index 1bad9c66..fe9f87fa 100644 --- a/runtime/msg.h +++ b/runtime/msg.h @@ -51,9 +51,11 @@ struct msg { BEGINobjInstance; /* Data to implement generic object - MUST be the first data element! */ pthread_mutexattr_t mutAttr; -short bDoLock; /* use the mutex? */ + bool bDoLock; /* use the mutex? */ pthread_mutex_t mut; - int iRefCount; /* reference counter (0 = unused) */ + flowControl_t flowCtlType; /**< type of flow control we can apply, for enqueueing, needs not to be persisted because + once data has entered the queue, this property is no longer needed. */ + short iRefCount; /* reference counter (0 = unused) */ short bParseHOSTNAME; /* should the hostname be parsed from the message? */ /* background: the hostname is not present on "regular" messages * received via UNIX domain sockets from the same machine. However, @@ -61,8 +63,6 @@ short bDoLock; /* use the mutex? */ * sockets. All in all, the parser would need parse templates, that would * resolve all these issues... rgerhards, 2005-10-06 */ - flowControl_t flowCtlType; /**< type of flow control we can apply, for enqueueing, needs not to be persisted because - once data has entered the queue, this property is no longer needed. */ short iSeverity; /* the severity 0..7 */ uchar *pszSeverity; /* severity as string... */ int iLenSeverity; /* ... and its length. */ @@ -73,12 +73,13 @@ short bDoLock; /* use the mutex? */ int iLenFacility; /* ... and its length. */ uchar *pszFacilityStr; /* facility name... */ int iLenFacilityStr; /* ... and its length. */ - uchar *pszPRI; /* the PRI as a string */ + uchar bufPRI[5]; /* PRI as string */ int iLenPRI; /* and its length */ uchar *pszRawMsg; /* message as it was received on the * wire. This is important in case we * need to preserve cryptographic verifiers. */ + short offAfterPRI; /* offset, at which raw message WITHOUT PRI part starts in pszRawMsg */ int iLenRawMsg; /* length of raw message */ uchar *pszMSG; /* the MSG part itself */ int iLenMSG; /* Length of the MSG part */ @@ -100,6 +101,13 @@ short bDoLock; /* use the mutex? */ cstr_t *pCSAPPNAME; /* APP-NAME */ cstr_t *pCSPROCID; /* PROCID */ cstr_t *pCSMSGID; /* MSGID */ + time_t ttGenTime; /* time msg object was generated, same as tRcvdAt, but a Unix timestamp. + While this field looks redundant, it is required because a Unix timestamp + is used at later processing stages (namely in the output arena). Thanks to + the subleties of how time is defined, there is no reliable way to reconstruct + the Unix timestamp from the syslogTime fields (in practice, we may be close + enough to reliable, but I prefer to leave the subtle things to the OS, where + it obviously is solved in way or another...). */ struct syslogTime tRcvdAt;/* time the message entered this program */ char *pszRcvdAt3164; /* time as RFC3164 formatted string (always 15 charcters) */ char *pszRcvdAt3339; /* time as RFC3164 formatted string (32 charcters at most) */ @@ -113,64 +121,71 @@ short bDoLock; /* use the mutex? */ char *pszTIMESTAMP_PgSQL;/* TIMESTAMP as PgSQL formatted string (always 21 characters) */ char *pszTIMESTAMP_SecFrac;/* TIMESTAMP fractional seconds (always 6 characters) */ int msgFlags; /* flags associated with this message */ + /* now follow fixed-size buffers to safe some time otherwise used for allocs */ + }; + +/* message flags (msgFlags), not an enum for historical reasons + */ +#define NOFLAG 0x000 /* no flag is set (to be used when a flag must be specified and none is required) */ +#define INTERNAL_MSG 0x001 /* msg generated by logmsgInternal() --> special handling */ +/* 0x002 not used because it was previously a known value - rgerhards, 2008-10-09 */ +#define IGNDATE 0x004 /* ignore, if given, date in message and use date of reception as msg date */ +#define MARK 0x008 /* this message is a mark */ +#define NEEDS_PARSING 0x010 /* raw message, must be parsed before processing can be done */ +#define PARSE_HOSTNAME 0x020 /* parse the hostname during message parsing */ + + /* function prototypes */ PROTOTYPEObjClassInit(msg); -char* getProgramName(msg_t*); rsRetVal msgConstruct(msg_t **ppThis); +rsRetVal msgConstructWithTime(msg_t **ppThis, struct syslogTime *stTime, time_t ttGenTime); rsRetVal msgDestruct(msg_t **ppM); msg_t* MsgDup(msg_t* pOld); msg_t *MsgAddRef(msg_t *pM); void setProtocolVersion(msg_t *pM, int iNewVersion); -int getProtocolVersion(msg_t *pM); -char *getProtocolVersionString(msg_t *pM); -int getMSGLen(msg_t *pM); -char *getRawMsg(msg_t *pM); -char *getUxTradMsg(msg_t *pM); -char *getMSG(msg_t *pM); -char *getPRI(msg_t *pM); -int getPRIi(msg_t *pM); -char *getTimeReported(msg_t *pM, enum tplFormatTypes eFmt); -char *getTimeGenerated(msg_t *pM, enum tplFormatTypes eFmt); -char *getSeverity(msg_t *pM); -char *getSeverityStr(msg_t *pM); -char *getFacility(msg_t *pM); -char *getFacilityStr(msg_t *pM); -void MsgSetInputName(msg_t *pMsg, char*); +void MsgSetInputName(msg_t *pMsg, uchar*, size_t); rsRetVal MsgSetAPPNAME(msg_t *pMsg, char* pszAPPNAME); -char *getAPPNAME(msg_t *pM); rsRetVal MsgSetPROCID(msg_t *pMsg, char* pszPROCID); -int getPROCIDLen(msg_t *pM); -char *getPROCID(msg_t *pM); rsRetVal MsgSetMSGID(msg_t *pMsg, char* pszMSGID); void MsgAssignTAG(msg_t *pMsg, uchar *pBuf); void MsgSetTAG(msg_t *pMsg, char* pszTAG); rsRetVal MsgSetFlowControlType(msg_t *pMsg, flowControl_t eFlowCtl); -char *getTAG(msg_t *pM); -int getHOSTNAMELen(msg_t *pM); -char *getHOSTNAME(msg_t *pM); -char *getRcvFrom(msg_t *pM); rsRetVal MsgSetStructuredData(msg_t *pMsg, char* pszStrucData); -char *getStructuredData(msg_t *pM); -int getProgramNameLen(msg_t *pM); -char *getProgramName(msg_t *pM); -void MsgSetRcvFrom(msg_t *pMsg, char* pszRcvFrom); +void MsgSetRcvFrom(msg_t *pMsg, uchar* pszRcvFrom); rsRetVal MsgSetRcvFromIP(msg_t *pMsg, uchar* pszRcvFromIP); void MsgAssignHOSTNAME(msg_t *pMsg, char *pBuf); -void MsgSetHOSTNAME(msg_t *pMsg, char* pszHOSTNAME); -int MsgSetUxTradMsg(msg_t *pMsg, char* pszUxTradMsg); +void MsgSetHOSTNAME(msg_t *pMsg, uchar* pszHOSTNAME); +rsRetVal MsgSetAfterPRIOffs(msg_t *pMsg, short offs); void MsgSetMSG(msg_t *pMsg, char* pszMSG); void MsgSetRawMsg(msg_t *pMsg, char* pszRawMsg); void moveHOSTNAMEtoTAG(msg_t *pM); -char *getMSGID(msg_t *pM); char *MsgGetProp(msg_t *pMsg, struct templateEntry *pTpe, cstr_t *pCSPropName, unsigned short *pbMustBeFreed); char *textpri(char *pRes, size_t pResLen, int pri); rsRetVal msgGetMsgVar(msg_t *pThis, cstr_t *pstrPropName, var_t **ppVar); rsRetVal MsgEnableThreadSafety(void); +/* TODO: remove these five (so far used in action.c) */ +char *getMSG(msg_t *pM); +char *getHOSTNAME(msg_t *pM); +char *getPROCID(msg_t *pM); +char *getAPPNAME(msg_t *pM); +int getMSGLen(msg_t *pM); + +char *getHOSTNAME(msg_t *pM); +int getHOSTNAMELen(msg_t *pM); +char *getProgramName(msg_t *pM); +int getProgramNameLen(msg_t *pM); +uchar *getRcvFrom(msg_t *pM); + +#if 0 +char *getUxTradMsg(msg_t *pM); +int MsgSetUxTradMsg(msg_t *pMsg, char* pszUxTradMsg); +#endif + /* The MsgPrepareEnqueue() function is a macro for performance reasons. * It needs one global variable to work. This is acceptable, as it gains * us quite some performance and is fully abstracted using this header file. @@ -181,6 +196,5 @@ extern void (*funcMsgPrepareEnqueue)(msg_t *pMsg); #define MsgPrepareEnqueue(pMsg) funcMsgPrepareEnqueue(pMsg) #endif /* #ifndef MSG_H_INCLUDED */ -/* - * vi:set ai: +/* vim:set ai: */ diff --git a/runtime/net.c b/runtime/net.c index f289ecc5..5cafe522 100644 --- a/runtime/net.c +++ b/runtime/net.c @@ -63,6 +63,11 @@ #include "errmsg.h" #include "net.h" +#ifdef OS_SOLARIS +# define s6_addr32 _S6_un._S6_u32 + typedef unsigned int u_int32_t; +#endif + MODULE_TYPE_LIB /* static data */ @@ -1233,7 +1238,9 @@ rsRetVal cvthname(struct sockaddr_storage *f, uchar *pszHost, uchar *pszHostFQDN * make this in option in the long term. (rgerhards, 2007-09-11) */ strcpy((char*)pszHost, (char*)pszHostFQDN); - if ((p = (uchar*) strchr((char*)pszHost, '.'))) { /* find start of domain name "machine.example.com" */ + if( (glbl.GetPreserveFQDN() == 0) + && (p = (uchar*) strchr((char*)pszHost, '.'))) { /* find start of domain name "machine.example.com" */ + strcmp((char*)(p + 1), (char*)glbl.GetLocalDomain()); if(strcmp((char*)(p + 1), (char*)glbl.GetLocalDomain()) == 0) { *p = '\0'; /* simply terminate the string */ } else { @@ -1489,6 +1496,49 @@ int *create_udp_socket(uchar *hostname, uchar *pszPort, int bIsServer) } +/* check if two provided socket addresses point to the same host. Note that the + * length of the sockets must be provided as third parameter. This is necessary to + * compare non IPv4/v6 hosts, in which case we do a simple memory compare of the + * address structure (in that case, the same host may not reliably be detected). + * Note that we need to do the comparison not on the full structure, because it contains things + * like the port, which we do not need to look at when thinking about hostnames. So we look + * at the relevant fields, what means a somewhat more complicated processing. + * Also note that we use a non-standard calling interface, as this is much more natural and + * it looks extremely unlikely that we get an exception of any kind here. What we + * return is mimiced after memcmp(), and as such useful for building binary trees + * (the order relation may be a bit arbritrary, but at least it is consistent). + * rgerhards, 2009-09-03 + */ +static int CmpHost(struct sockaddr_storage *s1, struct sockaddr_storage* s2, size_t socklen) +{ + int ret; + + if(((struct sockaddr*) s1)->sa_family != ((struct sockaddr*) s2)->sa_family) { + ret = memcmp(s1, s2, socklen); + goto finalize_it; + } + + if(((struct sockaddr*) s1)->sa_family == AF_INET) { + if(((struct sockaddr_in *) s1)->sin_addr.s_addr == ((struct sockaddr_in*)s2)->sin_addr.s_addr) { + ret = 0; + } else if(((struct sockaddr_in *) s1)->sin_addr.s_addr < ((struct sockaddr_in*)s2)->sin_addr.s_addr) { + ret = -1; + } else { + ret = 1; + } + } else if(((struct sockaddr*) s1)->sa_family == AF_INET6) { + /* IPv6 addresses are always 16 octets long */ + ret = memcmp(((struct sockaddr_in6 *)s1)->sin6_addr.s6_addr, ((struct sockaddr_in6*)s2)->sin6_addr.s6_addr, 16); + } else { + ret = memcmp(s1, s2, socklen); + } + +dbgprintf("CmpHost returns %d\n", ret); +finalize_it: + return ret; +} + + /* queryInterface function * rgerhards, 2008-03-05 */ @@ -1517,6 +1567,7 @@ CODESTARTobjQueryInterface(net) pIf->AddPermittedPeer = AddPermittedPeer; pIf->DestructPermittedPeers = DestructPermittedPeers; pIf->PermittedPeerWildcardMatch = PermittedPeerWildcardMatch; + pIf->CmpHost = CmpHost; finalize_it: ENDobjQueryInterface(net) diff --git a/runtime/net.h b/runtime/net.h index 092c3116..ec364b1c 100644 --- a/runtime/net.h +++ b/runtime/net.h @@ -146,11 +146,13 @@ BEGINinterface(net) /* name must also be changed in ENDinterface macro! */ rsRetVal (*AddPermittedPeer)(permittedPeers_t **ppRootPeer, uchar *pszID); rsRetVal (*DestructPermittedPeers)(permittedPeers_t **ppRootPeer); rsRetVal (*PermittedPeerWildcardMatch)(permittedPeers_t *pPeer, uchar *pszNameToMatch, int *pbIsMatching); + /* v5 interface additions */ + int (*CmpHost)(struct sockaddr_storage *, struct sockaddr_storage*, size_t); /* data members - these should go away over time... TODO */ int *pACLAddHostnameOnFail; /* add hostname to acl when DNS resolving has failed */ int *pACLDontResolve; /* add hostname to acl instead of resolving it to IP(s) */ ENDinterface(net) -#define netCURR_IF_VERSION 4 /* increment whenever you change the interface structure! */ +#define netCURR_IF_VERSION 5 /* increment whenever you change the interface structure! */ /* prototypes */ PROTOTYPEObj(net); diff --git a/runtime/netstrm.c b/runtime/netstrm.c index ffa1c578..3658006f 100644 --- a/runtime/netstrm.c +++ b/runtime/netstrm.c @@ -17,7 +17,7 @@ * Rainer Gerhards and Adiscon GmbH have agreed to permit using the code * under the terms of the GNU Lesser General Public License. * - * Copyright 2007, 2008 Rainer Gerhards and Adiscon GmbH. + * Copyright 2007-2009 Rainer Gerhards and Adiscon GmbH. * * This file is part of the rsyslog runtime library. * @@ -233,6 +233,19 @@ Send(netstrm_t *pThis, uchar *pBuf, ssize_t *pLenBuf) RETiRet; } +/* Enable Keep-Alive handling for those drivers that support it. + * rgerhards, 2009-06-02 + */ +static rsRetVal +EnableKeepAlive(netstrm_t *pThis) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, netstrm); + iRet = pThis->Drvr.EnableKeepAlive(pThis->pDrvrData); + RETiRet; +} + + /* check connection - slim wrapper for NSD driver function */ static void @@ -337,6 +350,7 @@ CODESTARTobjQueryInterface(netstrm) pIf->SetDrvrPermPeers = SetDrvrPermPeers; pIf->CheckConnection = CheckConnection; pIf->GetSock = GetSock; + pIf->EnableKeepAlive = EnableKeepAlive; finalize_it: ENDobjQueryInterface(netstrm) diff --git a/runtime/netstrm.h b/runtime/netstrm.h index 3ab790e8..f6931104 100644 --- a/runtime/netstrm.h +++ b/runtime/netstrm.h @@ -31,6 +31,7 @@ struct netstrm_s { BEGINobjInstance; /* Data to implement generic object - MUST be the first data element! */ nsd_t *pDrvrData; /**< the driver's data elements (at most other places, this is called pNsd) */ nsd_if_t Drvr; /**< our stream driver */ + void *pUsr; /**< pointer to user-provided data structure */ netstrms_t *pNS; /**< pointer to our netstream subsystem object */ }; @@ -68,9 +69,13 @@ BEGINinterface(netstrm) /* name must also be changed in ENDinterface macro! */ * sockets - not really desirable, but not the end of the world... TODO: should be * reconsidered when a new ACL system is build. -- rgerhards, 2008-12-01 */ + /* v4 */ + rsRetVal (*EnableKeepAlive)(netstrm_t *pThis); ENDinterface(netstrm) -#define netstrmCURR_IF_VERSION 3 /* increment whenever you change the interface structure! */ -/* interface version 3 added GetRemAddr() */ +#define netstrmCURR_IF_VERSION 4 /* increment whenever you change the interface structure! */ +/* interface version 3 added GetRemAddr() + * interface version 4 added EnableKeepAlive() -- rgerhards, 2009-06-02 + * */ /* prototypes */ PROTOTYPEObj(netstrm); diff --git a/runtime/nsd.h b/runtime/nsd.h index f0c9b9b6..8668c934 100644 --- a/runtime/nsd.h +++ b/runtime/nsd.h @@ -69,9 +69,13 @@ BEGINinterface(nsd) /* name must also be changed in ENDinterface macro! */ * sockets - not really desirable, but not the end of the world... TODO: should be * reconsidered when a new ACL system is build. -- rgerhards, 2008-12-01 */ + /* v5 */ + rsRetVal (*EnableKeepAlive)(nsd_t *pThis); ENDinterface(nsd) -#define nsdCURR_IF_VERSION 4 /* increment whenever you change the interface structure! */ -/* interface version 4 added GetRemAddr() */ +#define nsdCURR_IF_VERSION 5 /* increment whenever you change the interface structure! */ +/* interface version 4 added GetRemAddr() + * interface version 5 added EnableKeepAlive() -- rgerhards, 2009-06-02 + */ /* interface for the select call */ BEGINinterface(nsdsel) /* name must also be changed in ENDinterface macro! */ diff --git a/runtime/nsd_gtls.c b/runtime/nsd_gtls.c index 3a79a015..19dc8678 100644 --- a/runtime/nsd_gtls.c +++ b/runtime/nsd_gtls.c @@ -82,6 +82,7 @@ static gnutls_certificate_credentials xcred; static gnutls_dh_params dh_params; #ifdef DEBUG +#if 0 /* uncomment, if needed some time again -- DEV Debug only */ /* This defines a log function to be provided to GnuTLS. It hopefully * helps us track down hard to find problems. * rgerhards, 2008-06-20 @@ -90,6 +91,7 @@ static void logFunction(int level, const char *msg) { dbgprintf("GnuTLS log msg, level %d: %s\n", level, msg); } +#endif #endif /* #ifdef DEBUG */ @@ -333,7 +335,7 @@ gtlsGetCertInfo(nsd_gtls_t *pThis, cstr_t **ppStr) gnutls_x509_crt_deinit(cert); } - CHKiRet(rsCStrFinish(pStr)); + CHKiRet(cstrFinalize(pStr)); *ppStr = pStr; finalize_it: @@ -453,7 +455,7 @@ GenFingerprintStr(uchar *pFingerprint, size_t sizeFingerprint, cstr_t **ppStr) snprintf((char*)buf, sizeof(buf), ":%2.2X", pFingerprint[i]); CHKiRet(rsCStrAppendStrWithLen(pStr, buf, 3)); } - CHKiRet(rsCStrFinish(pStr)); + CHKiRet(cstrFinalize(pStr)); *ppStr = pStr; @@ -721,7 +723,7 @@ gtlsGetCN(nsd_gtls_t *pThis, gnutls_x509_crt *pCert, cstr_t **ppstrCN) } ++i; /* char processed */ } - CHKiRet(rsCStrFinish(pstrCN)); + CHKiRet(cstrFinalize(pstrCN)); /* we got it - we ignore the rest of the DN string (if any). So we may * not detect if it contains more than one CN @@ -882,7 +884,7 @@ gtlsChkPeerName(nsd_gtls_t *pThis, gnutls_x509_crt *pCert) if(!bFoundPositiveMatch) { dbgprintf("invalid peer name, not permitted to talk to it\n"); if(pThis->bReportAuthErr == 1) { - CHKiRet(rsCStrFinish(pStr)); + CHKiRet(cstrFinalize(pStr)); errno = 0; errmsg.LogError(0, RS_RET_INVALID_FINGERPRINT, "error: peer name not authorized - " "not permitted to talk to it. Names: %s", @@ -1558,6 +1560,16 @@ finalize_it: RETiRet; } +/* Enable KEEPALIVE handling on the socket. + * rgerhards, 2009-06-02 + */ +static rsRetVal +EnableKeepAlive(nsd_t *pNsd) +{ + return nsd_ptcp.EnableKeepAlive(pNsd); +} + + /* open a connection to a remote host (server). With GnuTLS, we always * open a plain tcp socket and then, if in TLS mode, do a handshake on it. @@ -1667,6 +1679,7 @@ CODESTARTobjQueryInterface(nsd_gtls) pIf->GetRemoteHName = GetRemoteHName; pIf->GetRemoteIP = GetRemoteIP; pIf->GetRemAddr = GetRemAddr; + pIf->EnableKeepAlive = EnableKeepAlive; finalize_it: ENDobjQueryInterface(nsd_gtls) diff --git a/runtime/nsd_ptcp.c b/runtime/nsd_ptcp.c index cc531ca0..54ee0666 100644 --- a/runtime/nsd_ptcp.c +++ b/runtime/nsd_ptcp.c @@ -614,6 +614,34 @@ finalize_it: } +/* Enable KEEPALIVE handling on the socket. + * rgerhards, 2009-06-02 + */ +static rsRetVal +EnableKeepAlive(nsd_t *pNsd) +{ + nsd_ptcp_t *pThis = (nsd_ptcp_t*) pNsd; + int ret; + int optval; + socklen_t optlen; + DEFiRet; + ISOBJ_TYPE_assert(pThis, nsd_ptcp); + + optval = 1; + optlen = sizeof(optval); + ret = setsockopt(pThis->sock, SOL_SOCKET, SO_KEEPALIVE, &optval, optlen); + if(ret < 0) { + dbgprintf("EnableKeepAlive socket call returns error %d\n", ret); + ABORT_FINALIZE(RS_RET_ERR); + } + + dbgprintf("KEEPALIVE enabled for nsd %p\n", pThis); + +finalize_it: + RETiRet; +} + + /* open a connection to a remote host (server). * rgerhards, 2008-03-19 */ @@ -754,6 +782,7 @@ CODESTARTobjQueryInterface(nsd_ptcp) pIf->GetRemoteHName = GetRemoteHName; pIf->GetRemoteIP = GetRemoteIP; pIf->CheckConnection = CheckConnection; + pIf->EnableKeepAlive = EnableKeepAlive; finalize_it: ENDobjQueryInterface(nsd_ptcp) diff --git a/runtime/obj-types.h b/runtime/obj-types.h index 914c2f2c..78829f94 100644 --- a/runtime/obj-types.h +++ b/runtime/obj-types.h @@ -280,7 +280,7 @@ rsRetVal objName##ClassExit(void) \ * rgerhards, 2008-01-30 */ #define BEGINobjDestruct(OBJ) \ - rsRetVal OBJ##Destruct(OBJ##_t **ppThis) \ + rsRetVal OBJ##Destruct(OBJ##_t __attribute__((unused)) **ppThis) \ { \ DEFiRet; \ int iCancelStateSave; \ @@ -314,7 +314,7 @@ rsRetVal objName##ClassExit(void) \ #define PROTOTYPEObjDebugPrint(obj) rsRetVal obj##DebugPrint(obj##_t *pThis) #define INTERFACEObjDebugPrint(obj) rsRetVal (*DebugPrint)(obj##_t *pThis) #define BEGINobjDebugPrint(obj) \ - rsRetVal obj##DebugPrint(obj##_t *pThis) \ + rsRetVal obj##DebugPrint(obj##_t __attribute__((unused)) *pThis) \ { \ DEFiRet; \ diff --git a/runtime/obj.c b/runtime/obj.c index 2a9df9ed..355c0f97 100644 --- a/runtime/obj.c +++ b/runtime/obj.c @@ -447,7 +447,7 @@ objDeserializeEmbedStr(cstr_t **ppStr, strm_t *pStrm) CHKiRet(rsCStrAppendChar(pStr, c)); NEXTC; } - CHKiRet(rsCStrFinish(pStr)); + CHKiRet(cstrFinalize(pStr)); *ppStr = pStr; @@ -515,7 +515,7 @@ static rsRetVal objDeserializeStr(cstr_t **ppCStr, int iLen, strm_t *pStrm) CHKiRet(rsCStrAppendChar(pCStr, c)); NEXTC; } - CHKiRet(rsCStrFinish(pCStr)); + CHKiRet(cstrFinalize(pCStr)); /* check terminator */ if(c != ':') ABORT_FINALIZE(RS_RET_INVALID_DELIMITER); @@ -629,7 +629,7 @@ static rsRetVal objDeserializeProperty(var_t *pProp, strm_t *pStrm) CHKiRet(rsCStrAppendChar(pProp->pcsName, c)); NEXTC; } - CHKiRet(rsCStrFinish(pProp->pcsName)); + CHKiRet(cstrFinalize(pProp->pcsName)); /* property type */ CHKiRet(objDeserializeNumber(&i, pStrm)); diff --git a/runtime/objomsr.c b/runtime/objomsr.c index 21d284f3..8dddc4b8 100644 --- a/runtime/objomsr.c +++ b/runtime/objomsr.c @@ -141,5 +141,23 @@ int OMSRgetEntry(omodStringRequest_t *pThis, int iEntry, uchar **ppTplName, int return RS_RET_OK; } + + +/* return the full set of template options that are supported by this version of + * OMSR. They are returned in an unsigned long value. The caller can mask that + * value to check on the option he is interested in. + * Note that this interface was added in 4.1.6, so a plugin must obtain a pointer + * to this interface via queryHostEtryPt(). + * rgerhards, 2009-04-03 + */ +rsRetVal +OMSRgetSupportedTplOpts(unsigned long *pOpts) +{ + DEFiRet; + assert(pOpts != NULL); + *pOpts = OMSR_RQD_TPL_OPT_SQL | OMSR_TPL_AS_ARRAY; + RETiRet; +} + /* vim:set ai: */ diff --git a/runtime/objomsr.h b/runtime/objomsr.h index 2255e4f3..75ad0fb8 100644 --- a/runtime/objomsr.h +++ b/runtime/objomsr.h @@ -1,6 +1,6 @@ /* Definition of the omsr (omodStringRequest) object. * - * Copyright 2007 Rainer Gerhards and Adiscon GmbH. + * Copyright 2007, 2009 Rainer Gerhards and Adiscon GmbH. * * This file is part of the rsyslog runtime library. * @@ -27,7 +27,8 @@ /* define flags for required template options */ #define OMSR_NO_RQD_TPL_OPTS 0 #define OMSR_RQD_TPL_OPT_SQL 1 -/* next option is 2, 4, 8, ... */ +#define OMSR_TPL_AS_ARRAY 2 /* introduced in 4.1.6, 2009-04-03 */ +/* next option is 4, 8, 16, ... */ struct omodStringRequest_s { /* strings requested by output module for doAction() */ int iNumEntries; /* number of array entries for data elements below */ @@ -40,6 +41,7 @@ typedef struct omodStringRequest_s omodStringRequest_t; rsRetVal OMSRdestruct(omodStringRequest_t *pThis); rsRetVal OMSRconstruct(omodStringRequest_t **ppThis, int iNumEntries); rsRetVal OMSRsetEntry(omodStringRequest_t *pThis, int iEntry, uchar *pTplName, int iTplOpts); +rsRetVal OMSRgetSupportedTplOpts(unsigned long *pOpts); int OMSRgetEntryCount(omodStringRequest_t *pThis); int OMSRgetEntry(omodStringRequest_t *pThis, int iEntry, uchar **ppTplName, int *piTplOpts); diff --git a/runtime/parser.c b/runtime/parser.c new file mode 100644 index 00000000..7eff0801 --- /dev/null +++ b/runtime/parser.c @@ -0,0 +1,356 @@ +/* parser.c + * This module contains functions for message parsers. It still needs to be + * converted into an object (and much extended). + * + * Module begun 2008-10-09 by Rainer Gerhards (based on previous code from syslogd.c) + * + * Copyright 2008 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of the rsyslog runtime library. + * + * The rsyslog runtime library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * The rsyslog runtime library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with the rsyslog runtime library. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + * A copy of the LGPL can be found in the file "COPYING.LESSER" in this distribution. + */ +#include "config.h" +#include <stdlib.h> +#include <ctype.h> +#include <string.h> +#include <assert.h> +#ifdef USE_NETZIP +#include <zlib.h> +#endif + +#include "rsyslog.h" +#include "dirty.h" +#include "msg.h" +#include "obj.h" +#include "errmsg.h" + +/* some defines */ +#define DEFUPRI (LOG_USER|LOG_NOTICE) + +/* definitions for objects we access */ +DEFobjStaticHelpers +DEFobjCurrIf(glbl) +DEFobjCurrIf(errmsg) + +/* static data */ + + +/* this is a dummy class init + */ +rsRetVal parserClassInit(void) +{ + DEFiRet; + + /* request objects we use */ + CHKiRet(objGetObjInterface(&obj)); /* this provides the root pointer for all other queries */ + CHKiRet(objUse(glbl, CORE_COMPONENT)); + CHKiRet(objUse(errmsg, CORE_COMPONENT)); +// TODO: free components! see action.c +finalize_it: + RETiRet; +} + + +/* uncompress a received message if it is compressed. + * pMsg->pszRawMsg buffer is updated. + * rgerhards, 2008-10-09 + */ +static inline rsRetVal uncompressMessage(msg_t *pMsg) +{ + DEFiRet; +# ifdef USE_NETZIP + uchar *deflateBuf = NULL; + uLongf iLenDefBuf; + uchar *pszMsg; + size_t lenMsg; + + assert(pMsg != NULL); + pszMsg = pMsg->pszRawMsg; + lenMsg = pMsg->iLenRawMsg; + + /* we first need to check if we have a compressed record. If so, + * we must decompress it. + */ + if(lenMsg > 0 && *pszMsg == 'z') { /* compressed data present? (do NOT change order if conditions!) */ + /* we have compressed data, so let's deflate it. We support a maximum + * message size of iMaxLine. If it is larger, an error message is logged + * and the message is dropped. We do NOT try to decompress larger messages + * as such might be used for denial of service. It might happen to later + * builds that such functionality be added as an optional, operator-configurable + * feature. + */ + int ret; + iLenDefBuf = glbl.GetMaxLine(); + CHKmalloc(deflateBuf = malloc(sizeof(uchar) * (iLenDefBuf + 1))); + ret = uncompress((uchar *) deflateBuf, &iLenDefBuf, (uchar *) pszMsg+1, lenMsg-1); + DBGPRINTF("Compressed message uncompressed with status %d, length: new %ld, old %d.\n", + ret, (long) iLenDefBuf, (int) (lenMsg-1)); + /* Now check if the uncompression worked. If not, there is not much we can do. In + * that case, we log an error message but ignore the message itself. Storing the + * compressed text is dangerous, as it contains control characters. So we do + * not do this. If someone would like to have a copy, this code here could be + * modified to do a hex-dump of the buffer in question. We do not include + * this functionality right now. + * rgerhards, 2006-12-07 + */ + if(ret != Z_OK) { + errmsg.LogError(0, NO_ERRCODE, "Uncompression of a message failed with return code %d " + "- enable debug logging if you need further information. " + "Message ignored.", ret); + FINALIZE; /* unconditional exit, nothing left to do... */ + } + free(pMsg->pszRawMsg); + pMsg->pszRawMsg = deflateBuf; + pMsg->iLenRawMsg = iLenDefBuf; + deflateBuf = NULL; /* logically "freed" - caller is now responsible */ + } +finalize_it: + if(deflateBuf != NULL) + free(deflateBuf); + +# else /* ifdef USE_NETZIP */ + + /* in this case, we still need to check if the message is compressed. If so, we must + * tell the user we can not accept it. + */ + if(pMsg->iLenRawMsg > 0 && *pMsg->pszRawMsg == 'z') { + errmsg.LogError(0, NO_ERRCODE, "Received a compressed message, but rsyslogd does not have compression " + "support enabled. The message will be ignored."); + ABORT_FINALIZE(RS_RET_NO_ZIP); + } + +finalize_it: +# endif /* ifdef USE_NETZIP */ + + RETiRet; +} + + +/* sanitize a received message + * if a message gets to large during sanitization, it is truncated. This is + * as specified in the upcoming syslog RFC series. + * rgerhards, 2008-10-09 + * We check if we have a NUL character at the very end of the + * message. This seems to be a frequent problem with a number of senders. + * So I have now decided to drop these NULs. However, if they are intentional, + * that may cause us some problems, e.g. with syslog-sign. On the other hand, + * current code always has problems with intentional NULs (as it needs to escape + * them to prevent problems with the C string libraries), so that does not + * really matter. Just to be on the save side, we'll log destruction of such + * NULs in the debug log. + * rgerhards, 2007-09-14 + */ +static inline rsRetVal +sanitizeMessage(msg_t *pMsg) +{ + DEFiRet; + uchar *pszMsg; + uchar *pDst; /* destination for copy job */ + size_t lenMsg; + size_t iSrc; + size_t iDst; + size_t iMaxLine; + + assert(pMsg != NULL); + assert(pMsg->iLenRawMsg > 0); + +# ifdef USE_NETZIP + CHKiRet(uncompressMessage(pMsg)); +# endif + + pszMsg = pMsg->pszRawMsg; + lenMsg = pMsg->iLenRawMsg; + + /* remove NUL character at end of message (see comment in function header) */ + if(pszMsg[lenMsg-1] == '\0') { + DBGPRINTF("dropped NUL at very end of message\n"); + lenMsg--; + } + + /* then we check if we need to drop trailing LFs, which often make + * their way into syslog messages unintentionally. In order to remain + * compatible to recent IETF developments, we allow the user to + * turn on/off this handling. rgerhards, 2007-07-23 + */ + if(bDropTrailingLF && pszMsg[lenMsg-1] == '\n') { + DBGPRINTF("dropped LF at very end of message (DropTrailingLF is set)\n"); + lenMsg--; + } + + /* it is much quicker to sweep over the message and see if it actually + * needs sanitation than to do the sanitation in any case. So we first do + * this and terminate when it is not needed - which is expectedly the case + * for the vast majority of messages. -- rgerhards, 2009-06-15 + */ + int bNeedSanitize = 0; + for(iSrc = 0 ; iSrc < lenMsg ; iSrc++) { + if(pszMsg[iSrc] < 32) { + if(pszMsg[iSrc] == '\0' || bEscapeCCOnRcv) { + bNeedSanitize = 1; + break; + } + } + } + if(bNeedSanitize == 0) { + /* what a shame - we do not have a \0 byte... + * TODO: think about adding it or otherwise be able to use it... + */ + uchar *pRaw; + CHKmalloc(pRaw = realloc(pMsg->pszRawMsg, pMsg->iLenRawMsg + 1)); + pRaw[pMsg->iLenRawMsg] = '\0'; + pMsg->pszRawMsg = pRaw; + FINALIZE; + } + + /* now copy over the message and sanitize it */ + /* TODO: can we get cheaper memory alloc? {alloca()?}*/ + iMaxLine = glbl.GetMaxLine(); + CHKmalloc(pDst = malloc(sizeof(uchar) * (iMaxLine + 1))); + iSrc = iDst = 0; + while(iSrc < lenMsg && iDst < iMaxLine) { + if(pszMsg[iSrc] == '\0') { /* guard against \0 characters... */ + /* changed to the sequence (somewhat) proposed in + * draft-ietf-syslog-protocol-19. rgerhards, 2006-11-30 + */ + if(iDst + 3 < iMaxLine) { /* do we have space? */ + pDst[iDst++] = cCCEscapeChar; + pDst[iDst++] = '0'; + pDst[iDst++] = '0'; + pDst[iDst++] = '0'; + } /* if we do not have space, we simply ignore the '\0'... */ + /* log an error? Very questionable... rgerhards, 2006-11-30 */ + /* decided: we do not log an error, it won't help... rger, 2007-06-21 */ + } else if(bEscapeCCOnRcv && iscntrl((int) pszMsg[iSrc])) { + /* we are configured to escape control characters. Please note + * that this most probably break non-western character sets like + * Japanese, Korean or Chinese. rgerhards, 2007-07-17 + * Note: sysklogd logs octal values only for DEL and CCs above 127. + * For others, it logs ^n where n is the control char converted to an + * alphabet character. We like consistency and thus escape it to octal + * in all cases. If someone complains, we may change the mode. At least + * we known now what's going on. + * rgerhards, 2007-07-17 + */ + if(iDst + 3 < iMaxLine) { /* do we have space? */ + pDst[iDst++] = cCCEscapeChar; + pDst[iDst++] = '0' + ((pszMsg[iSrc] & 0300) >> 6); + pDst[iDst++] = '0' + ((pszMsg[iSrc] & 0070) >> 3); + pDst[iDst++] = '0' + ((pszMsg[iSrc] & 0007)); + } /* again, if we do not have space, we ignore the char - see comment at '\0' */ + } else { + pDst[iDst++] = pszMsg[iSrc]; + } + ++iSrc; + } + pDst[iDst] = '\0'; /* space *is* reserved for this! */ + + /* we have a sanitized string. Let's save it now */ + free(pMsg->pszRawMsg); + if((pMsg->pszRawMsg = malloc((iDst+1) * sizeof(uchar))) == NULL) { + /* when we get no new buffer, we use what we already have ;) */ + pMsg->pszRawMsg = pDst; + } else { + /* trim buffer */ + memcpy(pMsg->pszRawMsg, pDst, iDst+1); + free(pDst); /* too big! */ + pMsg->iLenRawMsg = iDst; + } + +finalize_it: + RETiRet; +} + + +/* Parse a received message. The object's rawmsg property is taken and + * parsed according to the relevant standards. This can later be + * extended to support configured parsers. + * rgerhards, 2008-10-09 + */ +rsRetVal parseMsg(msg_t *pMsg) +{ + DEFiRet; + uchar *msg; + int pri; + int lenMsg; + int iPriText; + + if(pMsg->iLenRawMsg == 0) + ABORT_FINALIZE(RS_RET_EMPTY_MSG); + + CHKiRet(sanitizeMessage(pMsg)); + + /* we needed to sanitize first, because we otherwise do not have a C-string we can print... */ + DBGPRINTF("msg parser: flags %x, from '%s', msg '%s'\n", pMsg->msgFlags, pMsg->pszRcvFrom, pMsg->pszRawMsg); + + /* pull PRI */ + lenMsg = pMsg->iLenRawMsg; + msg = pMsg->pszRawMsg; + pri = DEFUPRI; + iPriText = 0; + if(*msg == '<') { + /* while we process the PRI, we also fill the PRI textual representation + * inside the msg object. This may not be ideal from an OOP point of view, + * but it offers us performance... + */ + pri = 0; + while(--lenMsg > 0 && isdigit((int) *++msg)) { + pMsg->bufPRI[iPriText++ % 4] = *msg; /* mod 4 to guard against malformed messages! */ + pri = 10 * pri + (*msg - '0'); + } + pMsg->bufPRI[iPriText % 4] = '\0'; + pMsg->iLenPRI = iPriText % 4; + if(*msg == '>') + ++msg; + if(pri & ~(LOG_FACMASK|LOG_PRIMASK)) + pri = DEFUPRI; + } + pMsg->iFacility = LOG_FAC(pri); + pMsg->iSeverity = LOG_PRI(pri); + MsgSetAfterPRIOffs(pMsg, msg - pMsg->pszRawMsg); + + if(pMsg->bParseHOSTNAME == 0) + MsgSetHOSTNAME(pMsg, pMsg->pszRcvFrom); + + /* rger 2005-11-24 (happy thanksgiving!): we now need to check if we have + * a traditional syslog message or one formatted according to syslog-protocol. + * We need to apply different parsers depending on that. We use the + * -protocol VERSION field for the detection. + */ + if(msg[0] == '1' && msg[1] == ' ') { + dbgprintf("Message has syslog-protocol format.\n"); + setProtocolVersion(pMsg, 1); + if(parseRFCSyslogMsg(pMsg, pMsg->msgFlags) == 1) { + msgDestruct(&pMsg); + ABORT_FINALIZE(RS_RET_ERR); // TODO: we need to handle these cases! + } + } else { /* we have legacy syslog */ + dbgprintf("Message has legacy syslog format.\n"); + setProtocolVersion(pMsg, 0); + if(parseLegacySyslogMsg(pMsg, pMsg->msgFlags) == 1) { + msgDestruct(&pMsg); + ABORT_FINALIZE(RS_RET_ERR); // TODO: we need to handle these cases! + } + } + + /* finalize message object */ + pMsg->msgFlags &= ~NEEDS_PARSING; /* this message is now parsed */ + MsgPrepareEnqueue(pMsg); /* "historical" name - prepare for multi-threading */ + +finalize_it: + RETiRet; +} diff --git a/runtime/parser.h b/runtime/parser.h new file mode 100644 index 00000000..cec9c083 --- /dev/null +++ b/runtime/parser.h @@ -0,0 +1,30 @@ +/* header for parser.c + * This is not yet an object, but contains all those code necessary to + * parse syslog messages. + * + * Copyright 2008 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of the rsyslog runtime library. + * + * The rsyslog runtime library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * The rsyslog runtime library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with the rsyslog runtime library. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the LGPL can be found in the file "COPYING.LESSER" in this distribution. + */ +#ifndef INCLUDED_PARSE_H +#define INCLUDED_PARSE_H + +extern rsRetVal parserClassInit(void); +extern rsRetVal parseMsg(msg_t*); + +#endif /* #ifndef INCLUDED_PARSE_H */ diff --git a/runtime/queue.c b/runtime/queue.c index e58b1686..4e017e84 100644 --- a/runtime/queue.c +++ b/runtime/queue.c @@ -49,20 +49,26 @@ #include "obj.h" #include "wtp.h" #include "wti.h" +#include "atomic.h" + +#ifdef OS_SOLARIS +# include <sched.h> +# define pthread_yield() sched_yield() +#endif /* static data */ DEFobjStaticHelpers DEFobjCurrIf(glbl) /* forward-definitions */ -rsRetVal queueChkPersist(queue_t *pThis); -static rsRetVal queueSetEnqOnly(queue_t *pThis, int bEnqOnly, int bLockMutex); -static rsRetVal queueRateLimiter(queue_t *pThis); -static int queueChkStopWrkrDA(queue_t *pThis); -static int queueIsIdleDA(queue_t *pThis); -static rsRetVal queueConsumerDA(queue_t *pThis, wti_t *pWti, int iCancelStateSave); -static rsRetVal queueConsumerCancelCleanup(void *arg1, void *arg2); -static rsRetVal queueUngetObj(queue_t *pThis, obj_t *pUsr, int bLockMutex); +rsRetVal qqueueChkPersist(qqueue_t *pThis); +static rsRetVal qqueueSetEnqOnly(qqueue_t *pThis, int bEnqOnly, int bLockMutex); +static rsRetVal qqueueRateLimiter(qqueue_t *pThis); +static int qqueueChkStopWrkrDA(qqueue_t *pThis); +static int qqueueIsIdleDA(qqueue_t *pThis); +static rsRetVal qqueueConsumerDA(qqueue_t *pThis, wti_t *pWti, int iCancelStateSave); +static rsRetVal qqueueConsumerCancelCleanup(void *arg1, void *arg2); +static rsRetVal qqueueUngetObj(qqueue_t *pThis, obj_t *pUsr, int bLockMutex); /* some constants for queuePersist () */ #define QUEUE_CHECKPOINT 1 @@ -76,7 +82,7 @@ static rsRetVal queueUngetObj(queue_t *pThis, obj_t *pUsr, int bLockMutex); * rgerhards, 2008-01-29 */ static inline int -queueGetOverallQueueSize(queue_t *pThis) +qqueueGetOverallQueueSize(qqueue_t *pThis) { #if 0 /* leave a bit in for debugging -- rgerhards, 2008-01-30 */ BEGINfunc @@ -95,7 +101,7 @@ ENDfunc * This function returns void, as it makes no sense to communicate an error back, even if * it happens. */ -static inline void queueDrain(queue_t *pThis) +static inline void queueDrain(qqueue_t *pThis) { void *pUsr; @@ -118,26 +124,26 @@ static inline void queueDrain(queue_t *pThis) * this point in time. The mutex must be locked when * ths function is called. -- rgerhards, 2008-01-25 */ -static inline rsRetVal queueAdviseMaxWorkers(queue_t *pThis) +static inline rsRetVal qqueueAdviseMaxWorkers(qqueue_t *pThis) { DEFiRet; int iMaxWorkers; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); if(!pThis->bEnqOnly) { if(pThis->bRunsDA) { /* if we have not yet reached the high water mark, there is no need to start a * worker. -- rgerhards, 2008-01-26 */ - if(queueGetOverallQueueSize(pThis) >= pThis->iHighWtrMrk || pThis->bQueueStarted == 0) { + if(qqueueGetOverallQueueSize(pThis) >= pThis->iHighWtrMrk || pThis->bQueueStarted == 0) { wtpAdviseMaxWorkers(pThis->pWtpDA, 1); /* disk queues have always one worker */ } } else { if(pThis->qType == QUEUETYPE_DISK || pThis->iMinMsgsPerWrkr == 0) { iMaxWorkers = 1; } else { - iMaxWorkers = queueGetOverallQueueSize(pThis) / pThis->iMinMsgsPerWrkr + 1; + iMaxWorkers = qqueueGetOverallQueueSize(pThis) / pThis->iMinMsgsPerWrkr + 1; } wtpAdviseMaxWorkers(pThis->pWtpReg, iMaxWorkers); /* disk queues have always one worker */ } @@ -152,11 +158,11 @@ static inline rsRetVal queueAdviseMaxWorkers(queue_t *pThis) * rgerhards, 2008-02-27 */ static rsRetVal -queueWaitDAModeInitialized(queue_t *pThis) +qqueueWaitDAModeInitialized(qqueue_t *pThis) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); ASSERT(pThis->bRunsDA); while(pThis->bRunsDA != 2) { @@ -178,17 +184,17 @@ queueWaitDAModeInitialized(queue_t *pThis) * rgerhards, 2008-01-15 */ static rsRetVal -queueTurnOffDAMode(queue_t *pThis) +qqueueTurnOffDAMode(qqueue_t *pThis) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); ASSERT(pThis->bRunsDA); /* at this point, we need a fully initialized DA queue. So if it isn't, we finally need * to wait for its startup... -- rgerhards, 2008-01-25 */ - queueWaitDAModeInitialized(pThis); + qqueueWaitDAModeInitialized(pThis); /* if we need to pull any data that we still need from the (child) disk queue, * now would be the time to do so. At present, we do not need this, but I'd like to @@ -207,15 +213,15 @@ queueTurnOffDAMode(queue_t *pThis) /* we destruct the queue object, which will also shutdown the queue worker. As the queue is empty, * this will be quick. */ - queueDestruct(&pThis->pqDA); /* and now we are ready to destruct the DA queue */ + qqueueDestruct(&pThis->pqDA); /* and now we are ready to destruct the DA queue */ dbgoprint((obj_t*) pThis, "disk-assistance has been turned off, disk queue was empty (iRet %d)\n", iRet); /* now we need to check if the regular queue has some messages. This may be the case * when it is waiting that the high water mark is reached again. If so, we need to start up * a regular worker. -- rgerhards, 2008-01-26 */ - if(queueGetOverallQueueSize(pThis) > 0) { - queueAdviseMaxWorkers(pThis); + if(qqueueGetOverallQueueSize(pThis) > 0) { + qqueueAdviseMaxWorkers(pThis); } } @@ -231,11 +237,11 @@ queueTurnOffDAMode(queue_t *pThis) * rgerhards, 2008-01-14 */ static rsRetVal -queueChkIsDA(queue_t *pThis) +qqueueChkIsDA(qqueue_t *pThis) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); if(pThis->pszFilePrefix != NULL) { pThis->bIsDA = 1; dbgoprint((obj_t*) pThis, "is disk-assisted, disk will be used on demand\n"); @@ -259,18 +265,18 @@ queueChkIsDA(queue_t *pThis) * rgerhards, 2008-01-15 */ static rsRetVal -queueStartDA(queue_t *pThis) +qqueueStartDA(qqueue_t *pThis) { DEFiRet; uchar pszDAQName[128]; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); if(pThis->bRunsDA == 2) /* check if already in (fully initialized) DA mode... */ FINALIZE; /* ... then we are already done! */ /* create message queue */ - CHKiRet(queueConstruct(&pThis->pqDA, QUEUETYPE_DISK , 1, 0, pThis->pConsumer)); + CHKiRet(qqueueConstruct(&pThis->pqDA, QUEUETYPE_DISK , 1, 0, pThis->pConsumer)); /* give it a name */ snprintf((char*) pszDAQName, sizeof(pszDAQName)/sizeof(uchar), "%s[DA]", obj.GetName((obj_t*) pThis)); @@ -281,30 +287,30 @@ queueStartDA(queue_t *pThis) */ pThis->pqDA->pqParent = pThis; - CHKiRet(queueSetpUsr(pThis->pqDA, pThis->pUsr)); - CHKiRet(queueSetsizeOnDiskMax(pThis->pqDA, pThis->sizeOnDiskMax)); - CHKiRet(queueSetiDeqSlowdown(pThis->pqDA, pThis->iDeqSlowdown)); - CHKiRet(queueSetMaxFileSize(pThis->pqDA, pThis->iMaxFileSize)); - CHKiRet(queueSetFilePrefix(pThis->pqDA, pThis->pszFilePrefix, pThis->lenFilePrefix)); - CHKiRet(queueSetiPersistUpdCnt(pThis->pqDA, pThis->iPersistUpdCnt)); - CHKiRet(queueSettoActShutdown(pThis->pqDA, pThis->toActShutdown)); - CHKiRet(queueSettoEnq(pThis->pqDA, pThis->toEnq)); - CHKiRet(queueSetEnqOnly(pThis->pqDA, pThis->bDAEnqOnly, MUTEX_ALREADY_LOCKED)); - CHKiRet(queueSetiDeqtWinFromHr(pThis->pqDA, pThis->iDeqtWinFromHr)); - CHKiRet(queueSetiDeqtWinToHr(pThis->pqDA, pThis->iDeqtWinToHr)); - CHKiRet(queueSetiHighWtrMrk(pThis->pqDA, 0)); - CHKiRet(queueSetiDiscardMrk(pThis->pqDA, 0)); + CHKiRet(qqueueSetpUsr(pThis->pqDA, pThis->pUsr)); + CHKiRet(qqueueSetsizeOnDiskMax(pThis->pqDA, pThis->sizeOnDiskMax)); + CHKiRet(qqueueSetiDeqSlowdown(pThis->pqDA, pThis->iDeqSlowdown)); + CHKiRet(qqueueSetMaxFileSize(pThis->pqDA, pThis->iMaxFileSize)); + CHKiRet(qqueueSetFilePrefix(pThis->pqDA, pThis->pszFilePrefix, pThis->lenFilePrefix)); + CHKiRet(qqueueSetiPersistUpdCnt(pThis->pqDA, pThis->iPersistUpdCnt)); + CHKiRet(qqueueSettoActShutdown(pThis->pqDA, pThis->toActShutdown)); + CHKiRet(qqueueSettoEnq(pThis->pqDA, pThis->toEnq)); + CHKiRet(qqueueSetEnqOnly(pThis->pqDA, pThis->bDAEnqOnly, MUTEX_ALREADY_LOCKED)); + CHKiRet(qqueueSetiDeqtWinFromHr(pThis->pqDA, pThis->iDeqtWinFromHr)); + CHKiRet(qqueueSetiDeqtWinToHr(pThis->pqDA, pThis->iDeqtWinToHr)); + CHKiRet(qqueueSetiHighWtrMrk(pThis->pqDA, 0)); + CHKiRet(qqueueSetiDiscardMrk(pThis->pqDA, 0)); if(pThis->toQShutdown == 0) { - CHKiRet(queueSettoQShutdown(pThis->pqDA, 0)); /* if the user really wants... */ + CHKiRet(qqueueSettoQShutdown(pThis->pqDA, 0)); /* if the user really wants... */ } else { /* we use the shortest possible shutdown (0 is endless!) because when we run on disk AND * have an obviously large backlog, we can't finish it in any case. So there is no point * in holding shutdown longer than necessary. -- rgerhards, 2008-01-15 */ - CHKiRet(queueSettoQShutdown(pThis->pqDA, 1)); + CHKiRet(qqueueSettoQShutdown(pThis->pqDA, 1)); } - iRet = queueStart(pThis->pqDA); + iRet = qqueueStart(pThis->pqDA); /* file not found is expected, that means it is no previous QIF available */ if(iRet != RS_RET_OK && iRet != RS_RET_FILE_NOT_FOUND) FINALIZE; /* something is wrong */ @@ -322,12 +328,12 @@ queueStartDA(queue_t *pThis) pthread_cond_broadcast(&pThis->condDAReady); /* signal we are now initialized and ready to go ;) */ dbgoprint((obj_t*) pThis, "is now running in disk assisted mode, disk queue 0x%lx\n", - queueGetID(pThis->pqDA)); + qqueueGetID(pThis->pqDA)); finalize_it: if(iRet != RS_RET_OK) { if(pThis->pqDA != NULL) { - queueDestruct(&pThis->pqDA); + qqueueDestruct(&pThis->pqDA); } dbgoprint((obj_t*) pThis, "error %d creating disk queue - giving up.\n", iRet); pThis->bIsDA = 0; @@ -344,7 +350,7 @@ finalize_it: * rgerhards, 2008-01-16 */ static inline rsRetVal -queueInitDA(queue_t *pThis, int bEnqOnly, int bLockMutex) +qqueueInitDA(qqueue_t *pThis, int bEnqOnly, int bLockMutex) { DEFiRet; DEFVARS_mutexProtection; @@ -362,12 +368,12 @@ queueInitDA(queue_t *pThis, int bEnqOnly, int bLockMutex) lenBuf = snprintf((char*)pszBuf, sizeof(pszBuf), "%s:DA", obj.GetName((obj_t*) pThis)); CHKiRet(wtpConstruct (&pThis->pWtpDA)); CHKiRet(wtpSetDbgHdr (pThis->pWtpDA, pszBuf, lenBuf)); - CHKiRet(wtpSetpfChkStopWrkr (pThis->pWtpDA, (rsRetVal (*)(void *pUsr, int)) queueChkStopWrkrDA)); - CHKiRet(wtpSetpfIsIdle (pThis->pWtpDA, (rsRetVal (*)(void *pUsr, int)) queueIsIdleDA)); - CHKiRet(wtpSetpfDoWork (pThis->pWtpDA, (rsRetVal (*)(void *pUsr, void *pWti, int)) queueConsumerDA)); - CHKiRet(wtpSetpfOnWorkerCancel (pThis->pWtpDA, (rsRetVal (*)(void *pUsr, void*pWti)) queueConsumerCancelCleanup)); - CHKiRet(wtpSetpfOnWorkerStartup (pThis->pWtpDA, (rsRetVal (*)(void *pUsr)) queueStartDA)); - CHKiRet(wtpSetpfOnWorkerShutdown(pThis->pWtpDA, (rsRetVal (*)(void *pUsr)) queueTurnOffDAMode)); + CHKiRet(wtpSetpfChkStopWrkr (pThis->pWtpDA, (rsRetVal (*)(void *pUsr, int)) qqueueChkStopWrkrDA)); + CHKiRet(wtpSetpfIsIdle (pThis->pWtpDA, (rsRetVal (*)(void *pUsr, int)) qqueueIsIdleDA)); + CHKiRet(wtpSetpfDoWork (pThis->pWtpDA, (rsRetVal (*)(void *pUsr, void *pWti, int)) qqueueConsumerDA)); + CHKiRet(wtpSetpfOnWorkerCancel (pThis->pWtpDA, (rsRetVal (*)(void *pUsr, void*pWti)) qqueueConsumerCancelCleanup)); + CHKiRet(wtpSetpfOnWorkerStartup (pThis->pWtpDA, (rsRetVal (*)(void *pUsr)) qqueueStartDA)); + CHKiRet(wtpSetpfOnWorkerShutdown(pThis->pWtpDA, (rsRetVal (*)(void *pUsr)) qqueueTurnOffDAMode)); CHKiRet(wtpSetpmutUsr (pThis->pWtpDA, pThis->mut)); CHKiRet(wtpSetpcondBusy (pThis->pWtpDA, &pThis->notEmpty)); CHKiRet(wtpSetiNumWorkerThreads (pThis->pWtpDA, 1)); @@ -400,14 +406,14 @@ finalize_it: * rgerhards, 2008-01-14 */ static inline rsRetVal -queueChkStrtDA(queue_t *pThis) +qqueueChkStrtDA(qqueue_t *pThis) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); /* if we do not hit the high water mark, we have nothing to do */ - if(queueGetOverallQueueSize(pThis) != pThis->iHighWtrMrk) + if(qqueueGetOverallQueueSize(pThis) != pThis->iHighWtrMrk) ABORT_FINALIZE(RS_RET_OK); if(pThis->bRunsDA) { @@ -421,15 +427,15 @@ queueChkStrtDA(queue_t *pThis) * we need at least one). */ dbgoprint((obj_t*) pThis, "%d entries - passed high water mark in DA mode, send notify\n", - queueGetOverallQueueSize(pThis)); - queueAdviseMaxWorkers(pThis); + qqueueGetOverallQueueSize(pThis)); + qqueueAdviseMaxWorkers(pThis); } else { /* this is the case when we are currently not running in DA mode. So it is time * to turn it back on. */ dbgoprint((obj_t*) pThis, "%d entries - passed high water mark for disk-assisted mode, initiating...\n", - queueGetOverallQueueSize(pThis)); - queueInitDA(pThis, QUEUE_MODE_ENQDEQ, MUTEX_ALREADY_LOCKED); /* initiate DA mode */ + qqueueGetOverallQueueSize(pThis)); + qqueueInitDA(pThis, QUEUE_MODE_ENQDEQ, MUTEX_ALREADY_LOCKED); /* initiate DA mode */ } finalize_it: @@ -447,7 +453,7 @@ finalize_it: */ /* -------------------- fixed array -------------------- */ -static rsRetVal qConstructFixedArray(queue_t *pThis) +static rsRetVal qConstructFixedArray(qqueue_t *pThis) { DEFiRet; @@ -463,14 +469,14 @@ static rsRetVal qConstructFixedArray(queue_t *pThis) pThis->tVars.farray.head = 0; pThis->tVars.farray.tail = 0; - queueChkIsDA(pThis); + qqueueChkIsDA(pThis); finalize_it: RETiRet; } -static rsRetVal qDestructFixedArray(queue_t *pThis) +static rsRetVal qDestructFixedArray(qqueue_t *pThis) { DEFiRet; @@ -485,7 +491,7 @@ static rsRetVal qDestructFixedArray(queue_t *pThis) } -static rsRetVal qAddFixedArray(queue_t *pThis, void* in) +static rsRetVal qAddFixedArray(qqueue_t *pThis, void* in) { DEFiRet; @@ -498,7 +504,7 @@ static rsRetVal qAddFixedArray(queue_t *pThis, void* in) RETiRet; } -static rsRetVal qDelFixedArray(queue_t *pThis, void **out) +static rsRetVal qDelFixedArray(qqueue_t *pThis, void **out) { DEFiRet; @@ -517,7 +523,7 @@ static rsRetVal qDelFixedArray(queue_t *pThis, void **out) /* first some generic functions which are also used for the unget linked list */ -static inline rsRetVal queueAddLinkedList(qLinkedList_t **ppRoot, qLinkedList_t **ppLast, void* pUsr) +static inline rsRetVal qqueueAddLinkedList(qLinkedList_t **ppRoot, qLinkedList_t **ppLast, void* pUsr) { DEFiRet; qLinkedList_t *pEntry; @@ -543,7 +549,7 @@ finalize_it: RETiRet; } -static inline rsRetVal queueDelLinkedList(qLinkedList_t **ppRoot, qLinkedList_t **ppLast, obj_t **ppUsr) +static inline rsRetVal qqueueDelLinkedList(qLinkedList_t **ppRoot, qLinkedList_t **ppLast, obj_t **ppUsr) { DEFiRet; qLinkedList_t *pEntry; @@ -570,7 +576,7 @@ static inline rsRetVal queueDelLinkedList(qLinkedList_t **ppRoot, qLinkedList_t /* end generic functions which are also used for the unget linked list */ -static rsRetVal qConstructLinkedList(queue_t *pThis) +static rsRetVal qConstructLinkedList(qqueue_t *pThis) { DEFiRet; @@ -579,13 +585,13 @@ static rsRetVal qConstructLinkedList(queue_t *pThis) pThis->tVars.linklist.pRoot = 0; pThis->tVars.linklist.pLast = 0; - queueChkIsDA(pThis); + qqueueChkIsDA(pThis); RETiRet; } -static rsRetVal qDestructLinkedList(queue_t __attribute__((unused)) *pThis) +static rsRetVal qDestructLinkedList(qqueue_t __attribute__((unused)) *pThis) { DEFiRet; @@ -598,11 +604,11 @@ static rsRetVal qDestructLinkedList(queue_t __attribute__((unused)) *pThis) RETiRet; } -static rsRetVal qAddLinkedList(queue_t *pThis, void* pUsr) +static rsRetVal qAddLinkedList(qqueue_t *pThis, void* pUsr) { DEFiRet; - iRet = queueAddLinkedList(&pThis->tVars.linklist.pRoot, &pThis->tVars.linklist.pLast, pUsr); + iRet = qqueueAddLinkedList(&pThis->tVars.linklist.pRoot, &pThis->tVars.linklist.pLast, pUsr); #if 0 qLinkedList_t *pEntry; @@ -626,10 +632,10 @@ finalize_it: RETiRet; } -static rsRetVal qDelLinkedList(queue_t *pThis, obj_t **ppUsr) +static rsRetVal qDelLinkedList(qqueue_t *pThis, obj_t **ppUsr) { DEFiRet; - iRet = queueDelLinkedList(&pThis->tVars.linklist.pRoot, &pThis->tVars.linklist.pLast, ppUsr); + iRet = qqueueDelLinkedList(&pThis->tVars.linklist.pRoot, &pThis->tVars.linklist.pLast, ppUsr); #if 0 qLinkedList_t *pEntry; @@ -656,11 +662,11 @@ static rsRetVal qDelLinkedList(queue_t *pThis, obj_t **ppUsr) static rsRetVal -queueLoadPersStrmInfoFixup(strm_t *pStrm, queue_t __attribute__((unused)) *pThis) +qqueueLoadPersStrmInfoFixup(strm_t *pStrm, qqueue_t __attribute__((unused)) *pThis) { DEFiRet; ISOBJ_TYPE_assert(pStrm, strm); - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); CHKiRet(strmSetDir(pStrm, glbl.GetWorkDir(), strlen((char*)glbl.GetWorkDir()))); finalize_it: RETiRet; @@ -672,14 +678,14 @@ finalize_it: * rgerhards, 2008-01-15 */ static rsRetVal -queueHaveQIF(queue_t *pThis) +qqueueHaveQIF(qqueue_t *pThis) { DEFiRet; uchar pszQIFNam[MAXFNAME]; size_t lenQIFNam; struct stat stat_buf; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); if(pThis->pszFilePrefix == NULL) ABORT_FINALIZE(RS_RET_NO_FILEPREFIX); @@ -709,7 +715,7 @@ finalize_it: * rgerhards, 2008-01-11 */ static rsRetVal -queueTryLoadPersistedInfo(queue_t *pThis) +qqueueTryLoadPersistedInfo(qqueue_t *pThis) { DEFiRet; strm_t *psQIF = NULL; @@ -719,7 +725,7 @@ queueTryLoadPersistedInfo(queue_t *pThis) int iUngottenObjs; obj_t *pUsr; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); /* Construct file name */ lenQIFNam = snprintf((char*)pszQIFNam, sizeof(pszQIFNam) / sizeof(uchar), "%s/%s.qi", @@ -754,15 +760,15 @@ queueTryLoadPersistedInfo(queue_t *pThis) while(iUngottenObjs > 0) { /* fill the queue from disk */ CHKiRet(obj.Deserialize((void*) &pUsr, (uchar*)"msg", psQIF, NULL, NULL)); - queueUngetObj(pThis, pUsr, MUTEX_ALREADY_LOCKED); + qqueueUngetObj(pThis, pUsr, MUTEX_ALREADY_LOCKED); --iUngottenObjs; /* one less */ } /* and now the stream objects (some order as when persisted!) */ CHKiRet(obj.Deserialize(&pThis->tVars.disk.pWrite, (uchar*) "strm", psQIF, - (rsRetVal(*)(obj_t*,void*))queueLoadPersStrmInfoFixup, pThis)); + (rsRetVal(*)(obj_t*,void*))qqueueLoadPersStrmInfoFixup, pThis)); CHKiRet(obj.Deserialize(&pThis->tVars.disk.pRead, (uchar*) "strm", psQIF, - (rsRetVal(*)(obj_t*,void*))queueLoadPersStrmInfoFixup, pThis)); + (rsRetVal(*)(obj_t*,void*))qqueueLoadPersStrmInfoFixup, pThis)); CHKiRet(strmSeekCurrOffs(pThis->tVars.disk.pWrite)); CHKiRet(strmSeekCurrOffs(pThis->tVars.disk.pRead)); @@ -792,7 +798,7 @@ finalize_it: * allowed file size at this point - that should be a config setting... * rgerhards, 2008-01-10 */ -static rsRetVal qConstructDisk(queue_t *pThis) +static rsRetVal qConstructDisk(qqueue_t *pThis) { DEFiRet; int bRestarted = 0; @@ -800,7 +806,7 @@ static rsRetVal qConstructDisk(queue_t *pThis) ASSERT(pThis != NULL); /* and now check if there is some persistent information that needs to be read in */ - iRet = queueTryLoadPersistedInfo(pThis); + iRet = qqueueTryLoadPersistedInfo(pThis); if(iRet == RS_RET_OK) bRestarted = 1; else if(iRet != RS_RET_FILE_NOT_FOUND) @@ -842,7 +848,7 @@ finalize_it: } -static rsRetVal qDestructDisk(queue_t *pThis) +static rsRetVal qDestructDisk(qqueue_t *pThis) { DEFiRet; @@ -854,7 +860,7 @@ static rsRetVal qDestructDisk(queue_t *pThis) RETiRet; } -static rsRetVal qAddDisk(queue_t *pThis, void* pUsr) +static rsRetVal qAddDisk(qqueue_t *pThis, void* pUsr) { DEFiRet; number_t nWriteCount; @@ -881,7 +887,7 @@ finalize_it: RETiRet; } -static rsRetVal qDelDisk(queue_t *pThis, void **ppUsr) +static rsRetVal qDelDisk(qqueue_t *pThis, void **ppUsr) { DEFiRet; @@ -912,18 +918,18 @@ finalize_it: } /* -------------------- direct (no queueing) -------------------- */ -static rsRetVal qConstructDirect(queue_t __attribute__((unused)) *pThis) +static rsRetVal qConstructDirect(qqueue_t __attribute__((unused)) *pThis) { return RS_RET_OK; } -static rsRetVal qDestructDirect(queue_t __attribute__((unused)) *pThis) +static rsRetVal qDestructDirect(qqueue_t __attribute__((unused)) *pThis) { return RS_RET_OK; } -static rsRetVal qAddDirect(queue_t *pThis, void* pUsr) +static rsRetVal qAddDirect(qqueue_t *pThis, void* pUsr) { DEFiRet; @@ -940,7 +946,7 @@ static rsRetVal qAddDirect(queue_t *pThis, void* pUsr) RETiRet; } -static rsRetVal qDelDirect(queue_t __attribute__((unused)) *pThis, __attribute__((unused)) void **out) +static rsRetVal qDelDirect(qqueue_t __attribute__((unused)) *pThis, __attribute__((unused)) void **out) { return RS_RET_OK; } @@ -955,12 +961,12 @@ static rsRetVal qDelDirect(queue_t __attribute__((unused)) *pThis, __attribute__ * rgerhards, 2008-01-20 */ static rsRetVal -queueUngetObj(queue_t *pThis, obj_t *pUsr, int bLockMutex) +qqueueUngetObj(qqueue_t *pThis, obj_t *pUsr, int bLockMutex) { DEFiRet; DEFVARS_mutexProtection; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); ISOBJ_assert(pUsr); /* TODO: we aborted right at this place at least 3 times -- race? 2008-02-28, -03-10, -03-15 The second time I noticed it the queue was in destruction with NO worker threads running. The pUsr ptr was totally off and provided no clue what it may be pointing @@ -969,7 +975,7 @@ queueUngetObj(queue_t *pThis, obj_t *pUsr, int bLockMutex) dbgoprint((obj_t*) pThis, "ungetting user object %s\n", obj.GetName(pUsr)); BEGIN_MTX_PROTECTED_OPERATIONS(pThis->mut, bLockMutex); - iRet = queueAddLinkedList(&pThis->pUngetRoot, &pThis->pUngetLast, pUsr); + iRet = qqueueAddLinkedList(&pThis->pUngetRoot, &pThis->pUngetLast, pUsr); ++pThis->iUngottenObjs; /* indicate one more */ END_MTX_PROTECTED_OPERATIONS(pThis->mut); @@ -985,14 +991,14 @@ queueUngetObj(queue_t *pThis, obj_t *pUsr, int bLockMutex) * rgerhards, 2008-01-29 */ static rsRetVal -queueGetUngottenObj(queue_t *pThis, obj_t **ppUsr) +qqueueGetUngottenObj(qqueue_t *pThis, obj_t **ppUsr) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); ASSERT(ppUsr != NULL); - iRet = queueDelLinkedList(&pThis->pUngetRoot, &pThis->pUngetLast, ppUsr); + iRet = qqueueDelLinkedList(&pThis->pUngetRoot, &pThis->pUngetLast, ppUsr); --pThis->iUngottenObjs; /* indicate one less */ dbgoprint((obj_t*) pThis, "dequeued ungotten user object %s\n", obj.GetName(*ppUsr)); @@ -1006,7 +1012,7 @@ queueGetUngottenObj(queue_t *pThis, obj_t **ppUsr) * things truely different. -- rgerhards, 2008-02-12 */ static rsRetVal -queueAdd(queue_t *pThis, void *pUsr) +qqueueAdd(qqueue_t *pThis, void *pUsr) { DEFiRet; @@ -1015,7 +1021,7 @@ queueAdd(queue_t *pThis, void *pUsr) CHKiRet(pThis->qAdd(pThis, pUsr)); if(pThis->qType != QUEUETYPE_DIRECT) { - ++pThis->iQueueSize; + ATOMIC_INC(pThis->iQueueSize); dbgoprint((obj_t*) pThis, "entry added, size now %d entries\n", pThis->iQueueSize); } @@ -1029,7 +1035,7 @@ finalize_it: * ungotten list and, if so, dequeue it first. */ static rsRetVal -queueDel(queue_t *pThis, void *pUsr) +qqueueDel(qqueue_t *pThis, void *pUsr) { DEFiRet; @@ -1041,10 +1047,10 @@ queueDel(queue_t *pThis, void *pUsr) * losing the whole process because it loops... -- rgerhards, 2008-01-03 */ if(pThis->iUngottenObjs > 0) { - iRet = queueGetUngottenObj(pThis, (obj_t**) pUsr); + iRet = qqueueGetUngottenObj(pThis, (obj_t**) pUsr); } else { iRet = pThis->qDel(pThis, pUsr); - --pThis->iQueueSize; + ATOMIC_DEC(pThis->iQueueSize); } dbgoprint((obj_t*) pThis, "entry deleted, state %d, size now %d entries\n", @@ -1065,14 +1071,14 @@ queueDel(queue_t *pThis, void *pUsr) * complex) if each would have its own shutdown. The function does not self check * this condition - the caller must make sure it is not called with a parent. */ -static rsRetVal queueShutdownWorkers(queue_t *pThis) +static rsRetVal qqueueShutdownWorkers(qqueue_t *pThis) { DEFiRet; DEFVARS_mutexProtection; struct timespec tTimeout; rsRetVal iRetLocal; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); ASSERT(pThis->pqParent == NULL); /* detect invalid calling sequence */ dbgoprint((obj_t*) pThis, "initiating worker thread shutdown sequence\n"); @@ -1086,7 +1092,7 @@ static rsRetVal queueShutdownWorkers(queue_t *pThis) /* first try to shutdown the queue within the regular shutdown period */ BEGIN_MTX_PROTECTED_OPERATIONS(pThis->mut, LOCK_MUTEX); /* some workers may be running in parallel! */ - if(queueGetOverallQueueSize(pThis) > 0) { + if(qqueueGetOverallQueueSize(pThis) > 0) { if(pThis->bRunsDA) { /* We may have waited on the low water mark. As it may have changed, we * see if we reactivate the worker. @@ -1124,7 +1130,7 @@ static rsRetVal queueShutdownWorkers(queue_t *pThis) if(pThis->bRunsDA) { END_MTX_PROTECTED_OPERATIONS(pThis->mut); dbgoprint((obj_t*) pThis, "we have a DA queue (0x%lx), requesting its shutdown.\n", - queueGetID(pThis->pqDA)); + qqueueGetID(pThis->pqDA)); /* we use the same absolute timeout as above, so we do not use more than the configured * timeout interval! */ @@ -1153,19 +1159,19 @@ static rsRetVal queueShutdownWorkers(queue_t *pThis) /* at this stage, we need to have the DA worker properly initialized and running (if there is one) */ if(pThis->bRunsDA) - queueWaitDAModeInitialized(pThis); + qqueueWaitDAModeInitialized(pThis); BEGIN_MTX_PROTECTED_OPERATIONS(pThis->mut, LOCK_MUTEX); /* some workers may be running in parallel! */ /* optimize parameters for shutdown of DA-enabled queues */ - if(pThis->bIsDA && queueGetOverallQueueSize(pThis) > 0 && pThis->bSaveOnShutdown) { + if(pThis->bIsDA && qqueueGetOverallQueueSize(pThis) > 0 && pThis->bSaveOnShutdown) { /* switch to enqueue-only mode so that no more actions happen */ if(pThis->bRunsDA == 0) { - queueInitDA(pThis, QUEUE_MODE_ENQONLY, MUTEX_ALREADY_LOCKED); /* switch to DA mode */ + qqueueInitDA(pThis, QUEUE_MODE_ENQONLY, MUTEX_ALREADY_LOCKED); /* switch to DA mode */ } else { /* TODO: RACE: we may reach this point when the DA worker has been initialized (state 1) * but is not yet running (state 2). In this case, pThis->pqDA is NULL! rgerhards, 2008-02-27 */ - queueSetEnqOnly(pThis->pqDA, QUEUE_MODE_ENQONLY, MUTEX_ALREADY_LOCKED); /* switch to enqueue-only mode */ + qqueueSetEnqOnly(pThis->pqDA, QUEUE_MODE_ENQONLY, MUTEX_ALREADY_LOCKED); /* switch to enqueue-only mode */ } END_MTX_PROTECTED_OPERATIONS(pThis->mut); /* make sure we do not timeout before we are done */ @@ -1187,7 +1193,7 @@ static rsRetVal queueShutdownWorkers(queue_t *pThis) * they will automatically terminate as there no longer is any message left to process. */ BEGIN_MTX_PROTECTED_OPERATIONS(pThis->mut, LOCK_MUTEX); /* some workers may be running in parallel! */ - if(queueGetOverallQueueSize(pThis) > 0) { + if(qqueueGetOverallQueueSize(pThis) > 0) { timeoutComp(&tTimeout, pThis->toActShutdown); if(wtpGetCurNumWrkr(pThis->pWtpReg, LOCK_MUTEX) > 0) { END_MTX_PROTECTED_OPERATIONS(pThis->mut); @@ -1256,7 +1262,7 @@ static rsRetVal queueShutdownWorkers(queue_t *pThis) * Well, more precisely, they *are in termination*. Some cancel cleanup handlers * may still be running. */ - dbgoprint((obj_t*) pThis, "worker threads terminated, remaining queue size %d.\n", queueGetOverallQueueSize(pThis)); + dbgoprint((obj_t*) pThis, "worker threads terminated, remaining queue size %d.\n", qqueueGetOverallQueueSize(pThis)); RETiRet; } @@ -1268,22 +1274,23 @@ static rsRetVal queueShutdownWorkers(queue_t *pThis) * is done by queueStart(). The reason is that we want to give the caller a chance * to modify some parameters before the queue is actually started. */ -rsRetVal queueConstruct(queue_t **ppThis, queueType_t qType, int iWorkerThreads, +rsRetVal qqueueConstruct(qqueue_t **ppThis, queueType_t qType, int iWorkerThreads, int iMaxQueueSize, rsRetVal (*pConsumer)(void*,void*)) { DEFiRet; - queue_t *pThis; + qqueue_t *pThis; ASSERT(ppThis != NULL); ASSERT(pConsumer != NULL); ASSERT(iWorkerThreads >= 0); - if((pThis = (queue_t *)calloc(1, sizeof(queue_t))) == NULL) { + if((pThis = (qqueue_t *)calloc(1, sizeof(qqueue_t))) == NULL) { ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); } /* we have an object, so let's fill the properties */ objConstructSetObjInfo(pThis); + pThis->bOptimizeUniProc = glbl.GetOptimizeUniProc(); if((pThis->pszSpoolDir = (uchar*) strdup((char*)glbl.GetWorkDir())) == NULL) ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); @@ -1314,7 +1321,7 @@ rsRetVal queueConstruct(queue_t **ppThis, queueType_t qType, int iWorkerThreads, pThis->qConstruct = qConstructLinkedList; pThis->qDestruct = qDestructLinkedList; pThis->qAdd = qAddLinkedList; - pThis->qDel = (rsRetVal (*)(queue_t*,void**)) qDelLinkedList; + pThis->qDel = (rsRetVal (*)(qqueue_t*,void**)) qDelLinkedList; break; case QUEUETYPE_DISK: pThis->qConstruct = qConstructDisk; @@ -1341,25 +1348,25 @@ finalize_it: /* cancellation cleanup handler for queueWorker () * Updates admin structure and frees ressources. * Params: - * arg1 - user pointer (in this case a queue_t) + * arg1 - user pointer (in this case a qqueue_t) * arg2 - user data pointer (in this case a queue data element, any object [queue's pUsr ptr!]) * Note that arg2 may be NULL, in which case no dequeued but unprocessed pUsr exists! * rgerhards, 2008-01-16 */ static rsRetVal -queueConsumerCancelCleanup(void *arg1, void *arg2) +qqueueConsumerCancelCleanup(void *arg1, void *arg2) { DEFiRet; - queue_t *pThis = (queue_t*) arg1; + qqueue_t *pThis = (qqueue_t*) arg1; obj_t *pUsr = (obj_t*) arg2; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); if(pUsr != NULL) { /* make sure the data element is not lost */ dbgoprint((obj_t*) pThis, "cancelation cleanup handler consumer called, we need to unget one user data element\n"); - CHKiRet(queueUngetObj(pThis, pUsr, LOCK_MUTEX)); + CHKiRet(qqueueUngetObj(pThis, pUsr, LOCK_MUTEX)); } finalize_it: @@ -1381,13 +1388,13 @@ finalize_it: * the return state! * rgerhards, 2008-01-24 */ -static int queueChkDiscardMsg(queue_t *pThis, int iQueueSize, int bRunsDA, void *pUsr) +static int qqueueChkDiscardMsg(qqueue_t *pThis, int iQueueSize, int bRunsDA, void *pUsr) { DEFiRet; rsRetVal iRetLocal; int iSeverity; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); ISOBJ_assert(pUsr); if(pThis->iDiscardMrk > 0 && iQueueSize >= pThis->iDiscardMrk && bRunsDA == 0) { @@ -1412,7 +1419,7 @@ finalize_it: * rgerhards, 2008-10-21 */ static rsRetVal -queueDequeueConsumable(queue_t *pThis, wti_t *pWti, int iCancelStateSave) +qqueueDequeueConsumable(qqueue_t *pThis, wti_t *pWti, int iCancelStateSave) { DEFiRet; void *pUsr; @@ -1420,9 +1427,9 @@ queueDequeueConsumable(queue_t *pThis, wti_t *pWti, int iCancelStateSave) int bRunsDA; /* cache for early mutex release */ /* dequeue element (still protected from mutex) */ - iRet = queueDel(pThis, &pUsr); - queueChkPersist(pThis); - iQueueSize = queueGetOverallQueueSize(pThis); /* cache this for after mutex release */ + iRet = qqueueDel(pThis, &pUsr); + qqueueChkPersist(pThis); + iQueueSize = qqueueGetOverallQueueSize(pThis); /* cache this for after mutex release */ bRunsDA = pThis->bRunsDA; /* cache this for after mutex release */ /* We now need to save the user pointer for the cancel cleanup handler, BUT ONLY @@ -1473,7 +1480,7 @@ queueDequeueConsumable(queue_t *pThis, wti_t *pWti, int iCancelStateSave) * provide real-time creation of spool files. * Note: It is OK to use the cached iQueueSize here, because it does not hurt if it is slightly wrong. */ - CHKiRet(queueChkDiscardMsg(pThis, iQueueSize, bRunsDA, pUsr)); + CHKiRet(qqueueChkDiscardMsg(pThis, iQueueSize, bRunsDA, pUsr)); finalize_it: if(iRet != RS_RET_OK && iRet != RS_RET_DISCARDMSG) { @@ -1522,7 +1529,7 @@ finalize_it: * but you get the idea from the code above. */ static rsRetVal -queueRateLimiter(queue_t *pThis) +qqueueRateLimiter(qqueue_t *pThis) { DEFiRet; int iDelay; @@ -1530,9 +1537,7 @@ queueRateLimiter(queue_t *pThis) time_t tCurr; struct tm m; - ISOBJ_TYPE_assert(pThis, queue); - - dbgoprint((obj_t*) pThis, "entering rate limiter\n"); + ISOBJ_TYPE_assert(pThis, qqueue); iDelay = 0; if(pThis->iDeqtWinToHr != 25) { /* 25 means disabled */ @@ -1587,14 +1592,14 @@ queueRateLimiter(queue_t *pThis) * rgerhards, 2008-01-21 */ static rsRetVal -queueConsumerReg(queue_t *pThis, wti_t *pWti, int iCancelStateSave) +qqueueConsumerReg(qqueue_t *pThis, wti_t *pWti, int iCancelStateSave) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); ISOBJ_TYPE_assert(pWti, wti); - CHKiRet(queueDequeueConsumable(pThis, pWti, iCancelStateSave)); + CHKiRet(qqueueDequeueConsumable(pThis, pWti, iCancelStateSave)); CHKiRet(pThis->pConsumer(pThis->pUsr, pWti->pUsrp)); /* we now need to check if we should deliberately delay processing a bit @@ -1621,15 +1626,15 @@ finalize_it: * rgerhards, 2008-01-14 */ static rsRetVal -queueConsumerDA(queue_t *pThis, wti_t *pWti, int iCancelStateSave) +qqueueConsumerDA(qqueue_t *pThis, wti_t *pWti, int iCancelStateSave) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); ISOBJ_TYPE_assert(pWti, wti); - CHKiRet(queueDequeueConsumable(pThis, pWti, iCancelStateSave)); - CHKiRet(queueEnqObj(pThis->pqDA, eFLOWCTL_NO_DELAY, pWti->pUsrp)); + CHKiRet(qqueueDequeueConsumable(pThis, pWti, iCancelStateSave)); + CHKiRet(qqueueEnqObj(pThis->pqDA, eFLOWCTL_NO_DELAY, pWti->pUsrp)); finalize_it: dbgoprint((obj_t*) pThis, "DAConsumer returns with iRet %d\n", iRet); @@ -1645,7 +1650,7 @@ finalize_it: * the DA queue */ static int -queueChkStopWrkrDA(queue_t *pThis) +qqueueChkStopWrkrDA(qqueue_t *pThis) { /* if our queue is in destruction, we drain to the DA queue and so we shall not terminate * until we have done so. @@ -1664,7 +1669,7 @@ queueChkStopWrkrDA(queue_t *pThis) && pThis->pqDA->tVars.disk.sizeOnDisk > pThis->pqDA->sizeOnDiskMax) { /* this queue can never grow, so we can give up... */ bStopWrkr = 1; - } else if(queueGetOverallQueueSize(pThis) < pThis->iHighWtrMrk && pThis->bQueueStarted == 1) { + } else if(qqueueGetOverallQueueSize(pThis) < pThis->iHighWtrMrk && pThis->bQueueStarted == 1) { bStopWrkr = 1; } else { bStopWrkr = 0; @@ -1687,9 +1692,9 @@ queueChkStopWrkrDA(queue_t *pThis) * the DA queue */ static int -queueChkStopWrkrReg(queue_t *pThis) +qqueueChkStopWrkrReg(qqueue_t *pThis) { - return pThis->bEnqOnly || pThis->bRunsDA || (pThis->pqParent != NULL && queueGetOverallQueueSize(pThis) == 0); + return pThis->bEnqOnly || pThis->bRunsDA || (pThis->pqParent != NULL && qqueueGetOverallQueueSize(pThis) == 0); } @@ -1697,26 +1702,26 @@ queueChkStopWrkrReg(queue_t *pThis) * are not stable! DA queue version */ static int -queueIsIdleDA(queue_t *pThis) +qqueueIsIdleDA(qqueue_t *pThis) { /* remember: iQueueSize is the DA queue size, not the main queue! */ /* TODO: I think we need just a single function for DA and non-DA mode - but I leave it for now as is */ - return(queueGetOverallQueueSize(pThis) == 0 || (pThis->bRunsDA && queueGetOverallQueueSize(pThis) <= pThis->iLowWtrMrk)); + return(qqueueGetOverallQueueSize(pThis) == 0 || (pThis->bRunsDA && qqueueGetOverallQueueSize(pThis) <= pThis->iLowWtrMrk)); } /* must only be called when the queue mutex is locked, else results * are not stable! Regular queue version */ static int -queueIsIdleReg(queue_t *pThis) +qqueueIsIdleReg(qqueue_t *pThis) { #if 0 /* enable for performance testing */ int ret; - ret = queueGetOverallQueueSize(pThis) == 0 || (pThis->bRunsDA && queueGetOverallQueueSize(pThis) <= pThis->iLowWtrMrk); + ret = qqueueGetOverallQueueSize(pThis) == 0 || (pThis->bRunsDA && qqueueGetOverallQueueSize(pThis) <= pThis->iLowWtrMrk); if(ret) fprintf(stderr, "queue is idle\n"); return ret; #else /* regular code! */ - return(queueGetOverallQueueSize(pThis) == 0 || (pThis->bRunsDA && queueGetOverallQueueSize(pThis) <= pThis->iLowWtrMrk)); + return(qqueueGetOverallQueueSize(pThis) == 0 || (pThis->bRunsDA && qqueueGetOverallQueueSize(pThis) <= pThis->iLowWtrMrk)); #endif } @@ -1735,11 +1740,11 @@ queueIsIdleReg(queue_t *pThis) * I am telling this, because I, too, always get confused by those... */ static rsRetVal -queueRegOnWrkrShutdown(queue_t *pThis) +qqueueRegOnWrkrShutdown(qqueue_t *pThis) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); if(pThis->pqParent != NULL) { pThis->pqParent->bChildIsDone = 1; /* indicate we are done */ @@ -1756,11 +1761,11 @@ queueRegOnWrkrShutdown(queue_t *pThis) * hook to indicate in the parent queue (if we are a child) that we are not done yet. */ static rsRetVal -queueRegOnWrkrStartup(queue_t *pThis) +qqueueRegOnWrkrStartup(qqueue_t *pThis) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); if(pThis->pqParent != NULL) { pThis->pqParent->bChildIsDone = 0; @@ -1773,7 +1778,7 @@ queueRegOnWrkrStartup(queue_t *pThis) /* start up the queue - it must have been constructed and parameters defined * before. */ -rsRetVal queueStart(queue_t *pThis) /* this is the ConstructionFinalizer */ +rsRetVal qqueueStart(qqueue_t *pThis) /* this is the ConstructionFinalizer */ { DEFiRet; rsRetVal iRetLocal; @@ -1812,7 +1817,7 @@ rsRetVal queueStart(queue_t *pThis) /* this is the ConstructionFinalizer */ dbgoprint((obj_t*) pThis, "type %d, enq-only %d, disk assisted %d, maxFileSz %lld, qsize %d, child %d, " "full delay %d, light delay %d starting\n", pThis->qType, pThis->bEnqOnly, pThis->bIsDA, pThis->iMaxFileSize, - queueGetOverallQueueSize(pThis), pThis->pqParent == NULL ? 0 : 1, + qqueueGetOverallQueueSize(pThis), pThis->pqParent == NULL ? 0 : 1, pThis->iFullDlyMrk, pThis->iLightDlyMrk); if(pThis->qType == QUEUETYPE_DIRECT) @@ -1824,13 +1829,13 @@ rsRetVal queueStart(queue_t *pThis) /* this is the ConstructionFinalizer */ lenBuf = snprintf((char*)pszBuf, sizeof(pszBuf), "%s:Reg", obj.GetName((obj_t*) pThis)); CHKiRet(wtpConstruct (&pThis->pWtpReg)); CHKiRet(wtpSetDbgHdr (pThis->pWtpReg, pszBuf, lenBuf)); - CHKiRet(wtpSetpfRateLimiter (pThis->pWtpReg, (rsRetVal (*)(void *pUsr)) queueRateLimiter)); - CHKiRet(wtpSetpfChkStopWrkr (pThis->pWtpReg, (rsRetVal (*)(void *pUsr, int)) queueChkStopWrkrReg)); - CHKiRet(wtpSetpfIsIdle (pThis->pWtpReg, (rsRetVal (*)(void *pUsr, int)) queueIsIdleReg)); - CHKiRet(wtpSetpfDoWork (pThis->pWtpReg, (rsRetVal (*)(void *pUsr, void *pWti, int)) queueConsumerReg)); - CHKiRet(wtpSetpfOnWorkerCancel (pThis->pWtpReg, (rsRetVal (*)(void *pUsr, void*pWti))queueConsumerCancelCleanup)); - CHKiRet(wtpSetpfOnWorkerStartup (pThis->pWtpReg, (rsRetVal (*)(void *pUsr)) queueRegOnWrkrStartup)); - CHKiRet(wtpSetpfOnWorkerShutdown(pThis->pWtpReg, (rsRetVal (*)(void *pUsr)) queueRegOnWrkrShutdown)); + CHKiRet(wtpSetpfRateLimiter (pThis->pWtpReg, (rsRetVal (*)(void *pUsr)) qqueueRateLimiter)); + CHKiRet(wtpSetpfChkStopWrkr (pThis->pWtpReg, (rsRetVal (*)(void *pUsr, int)) qqueueChkStopWrkrReg)); + CHKiRet(wtpSetpfIsIdle (pThis->pWtpReg, (rsRetVal (*)(void *pUsr, int)) qqueueIsIdleReg)); + CHKiRet(wtpSetpfDoWork (pThis->pWtpReg, (rsRetVal (*)(void *pUsr, void *pWti, int)) qqueueConsumerReg)); + CHKiRet(wtpSetpfOnWorkerCancel (pThis->pWtpReg, (rsRetVal (*)(void *pUsr, void*pWti))qqueueConsumerCancelCleanup)); + CHKiRet(wtpSetpfOnWorkerStartup (pThis->pWtpReg, (rsRetVal (*)(void *pUsr)) qqueueRegOnWrkrStartup)); + CHKiRet(wtpSetpfOnWorkerShutdown(pThis->pWtpReg, (rsRetVal (*)(void *pUsr)) qqueueRegOnWrkrShutdown)); CHKiRet(wtpSetpmutUsr (pThis->pWtpReg, pThis->mut)); CHKiRet(wtpSetpcondBusy (pThis->pWtpReg, &pThis->notEmpty)); CHKiRet(wtpSetiNumWorkerThreads (pThis->pWtpReg, pThis->iNumWorkerThreads)); @@ -1843,10 +1848,10 @@ rsRetVal queueStart(queue_t *pThis) /* this is the ConstructionFinalizer */ /* If we are disk-assisted, we need to check if there is a QIF file * which we need to load. -- rgerhards, 2008-01-15 */ - iRetLocal = queueHaveQIF(pThis); + iRetLocal = qqueueHaveQIF(pThis); if(iRetLocal == RS_RET_OK) { dbgoprint((obj_t*) pThis, "on-disk queue present, needs to be reloaded\n"); - queueInitDA(pThis, QUEUE_MODE_ENQDEQ, LOCK_MUTEX); /* initiate DA mode */ + qqueueInitDA(pThis, QUEUE_MODE_ENQDEQ, LOCK_MUTEX); /* initiate DA mode */ bInitialized = 1; /* we are done */ } else { /* TODO: use logerror? -- rgerhards, 2008-01-16 */ @@ -1863,7 +1868,7 @@ rsRetVal queueStart(queue_t *pThis) /* this is the ConstructionFinalizer */ /* if the queue already contains data, we need to start the correct number of worker threads. This can be * the case when a disk queue has been loaded. If we did not start it here, it would never start. */ - queueAdviseMaxWorkers(pThis); + qqueueAdviseMaxWorkers(pThis); pThis->bQueueStarted = 1; finalize_it: @@ -1878,7 +1883,7 @@ finalize_it: * and 0 otherwise. * rgerhards, 2008-01-10 */ -static rsRetVal queuePersist(queue_t *pThis, int bIsCheckpoint) +static rsRetVal qqueuePersist(qqueue_t *pThis, int bIsCheckpoint) { DEFiRet; strm_t *psQIF = NULL; /* Queue Info File */ @@ -1889,7 +1894,7 @@ static rsRetVal queuePersist(queue_t *pThis, int bIsCheckpoint) ASSERT(pThis != NULL); if(pThis->qType != QUEUETYPE_DISK) { - if(queueGetOverallQueueSize(pThis) > 0) { + if(qqueueGetOverallQueueSize(pThis) > 0) { /* This error code is OK, but we will probably not implement this any time * The reason is that persistence happens via DA queues. But I would like to * leave the code as is, as we so have a hook in case we need one. @@ -1900,13 +1905,13 @@ static rsRetVal queuePersist(queue_t *pThis, int bIsCheckpoint) FINALIZE; /* if the queue is empty, we are happy and done... */ } - dbgoprint((obj_t*) pThis, "persisting queue to disk, %d entries...\n", queueGetOverallQueueSize(pThis)); + dbgoprint((obj_t*) pThis, "persisting queue to disk, %d entries...\n", qqueueGetOverallQueueSize(pThis)); /* Construct file name */ lenQIFNam = snprintf((char*)pszQIFNam, sizeof(pszQIFNam) / sizeof(uchar), "%s/%s.qi", (char*) glbl.GetWorkDir(), (char*)pThis->pszFilePrefix); - if((bIsCheckpoint != QUEUE_CHECKPOINT) && (queueGetOverallQueueSize(pThis) == 0)) { + if((bIsCheckpoint != QUEUE_CHECKPOINT) && (qqueueGetOverallQueueSize(pThis) == 0)) { if(pThis->bNeedDelQIF) { unlink((char*)pszQIFNam); pThis->bNeedDelQIF = 0; @@ -1940,7 +1945,7 @@ static rsRetVal queuePersist(queue_t *pThis, int bIsCheckpoint) * to the regular files. -- rgerhards, 2008-01-29 */ while(pThis->iUngottenObjs > 0) { - CHKiRet(queueGetUngottenObj(pThis, &pUsr)); + CHKiRet(qqueueGetUngottenObj(pThis, &pUsr)); CHKiRet((objSerialize(pUsr))(pUsr, psQIF)); objDestruct(pUsr); } @@ -1974,14 +1979,14 @@ finalize_it: * abide to our regular call interface)... * rgerhards, 2008-01-13 */ -rsRetVal queueChkPersist(queue_t *pThis) +rsRetVal qqueueChkPersist(qqueue_t *pThis) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); if(pThis->iPersistUpdCnt && ++pThis->iUpdsSincePersist >= pThis->iPersistUpdCnt) { - queuePersist(pThis, QUEUE_CHECKPOINT); + qqueuePersist(pThis, QUEUE_CHECKPOINT); pThis->iUpdsSincePersist = 0; } @@ -1990,8 +1995,8 @@ rsRetVal queueChkPersist(queue_t *pThis) /* destructor for the queue object */ -BEGINobjDestruct(queue) /* be sure to specify the object type also in END and CODESTART macros! */ -CODESTARTobjDestruct(queue) +BEGINobjDestruct(qqueue) /* be sure to specify the object type also in END and CODESTART macros! */ +CODESTARTobjDestruct(qqueue) pThis->bQueueInDestruction = 1; /* indicate we are in destruction (modifies some behaviour) */ /* shut down all workers (handles *all* of the persistence logic) @@ -2001,7 +2006,7 @@ CODESTARTobjDestruct(queue) * with a child! -- rgerhards, 2008-01-28 */ if(pThis->qType != QUEUETYPE_DIRECT && !pThis->bEnqOnly && pThis->pqParent == NULL) - queueShutdownWorkers(pThis); + qqueueShutdownWorkers(pThis); /* finally destruct our (regular) worker thread pool * Note: currently pWtpReg is never NULL, but if we optimize our logic, this may happen, @@ -2026,7 +2031,7 @@ CODESTARTobjDestruct(queue) wtpDestruct(&pThis->pWtpDA); } if(pThis->pqDA != NULL) { - queueDestruct(&pThis->pqDA); + qqueueDestruct(&pThis->pqDA); } /* persist the queue (we always do that - queuePersits() does cleanup if the queue is empty) @@ -2036,7 +2041,7 @@ CODESTARTobjDestruct(queue) * disk queues and DA mode. Anyhow, it doesn't hurt to know that we could extend it here * if need arises (what I doubt...) -- rgerhards, 2008-01-25 */ - CHKiRet_Hdlr(queuePersist(pThis, QUEUE_NO_CHECKPOINT)) { + CHKiRet_Hdlr(qqueuePersist(pThis, QUEUE_NO_CHECKPOINT)) { dbgoprint((obj_t*) pThis, "error %d persisting queue - data lost!\n", iRet); } @@ -2061,7 +2066,7 @@ CODESTARTobjDestruct(queue) if(pThis->pszSpoolDir != NULL) free(pThis->pszSpoolDir); -ENDobjDestruct(queue) +ENDobjDestruct(qqueue) /* set the queue's file prefix @@ -2070,7 +2075,7 @@ ENDobjDestruct(queue) * rgerhards, 2008-01-09 */ rsRetVal -queueSetFilePrefix(queue_t *pThis, uchar *pszPrefix, size_t iLenPrefix) +qqueueSetFilePrefix(qqueue_t *pThis, uchar *pszPrefix, size_t iLenPrefix) { DEFiRet; @@ -2093,11 +2098,11 @@ finalize_it: * rgerhards, 2008-01-09 */ rsRetVal -queueSetMaxFileSize(queue_t *pThis, size_t iMaxFileSize) +qqueueSetMaxFileSize(qqueue_t *pThis, size_t iMaxFileSize) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); if(iMaxFileSize < 1024) { ABORT_FINALIZE(RS_RET_VALUE_TOO_LOW); @@ -2114,13 +2119,22 @@ finalize_it: * Enqueues the new element and awakes worker thread. */ rsRetVal -queueEnqObj(queue_t *pThis, flowControl_t flowCtlType, void *pUsr) +qqueueEnqObj(qqueue_t *pThis, flowControl_t flowCtlType, void *pUsr) { DEFiRet; int iCancelStateSave; struct timespec t; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); + + /* first check if we need to discard this message (which will cause CHKiRet() to exit) + * rgerhards, 2008-10-07: It is OK to do this outside of mutex protection. The iQueueSize + * and bRunsDA parameters may not reflect the correct settings here, but they are + * "good enough" in the sense that they can be used to drive the decision. Valgrind's + * threading tools may point this access to be an error, but this is done + * intentional. I do not see this causes problems to us. + */ + CHKiRet(qqueueChkDiscardMsg(pThis, pThis->iQueueSize, pThis->bRunsDA, pUsr)); /* Please note that this function is not cancel-safe and consequently * sets the calling thread's cancelibility state to PTHREAD_CANCEL_DISABLE @@ -2133,12 +2147,9 @@ queueEnqObj(queue_t *pThis, flowControl_t flowCtlType, void *pUsr) d_pthread_mutex_lock(pThis->mut); } - /* first check if we need to discard this message (which will cause CHKiRet() to exit) */ - CHKiRet(queueChkDiscardMsg(pThis, pThis->iQueueSize, pThis->bRunsDA, pUsr)); - /* then check if we need to add an assistance disk queue */ if(pThis->bIsDA) - CHKiRet(queueChkStrtDA(pThis)); + CHKiRet(qqueueChkStrtDA(pThis)); /* handle flow control * There are two different flow control mechanisms: basic and advanced flow control. @@ -2191,17 +2202,24 @@ queueEnqObj(queue_t *pThis, flowControl_t flowCtlType, void *pUsr) } /* and finally enqueue the message */ - CHKiRet(queueAdd(pThis, pUsr)); - queueChkPersist(pThis); + CHKiRet(qqueueAdd(pThis, pUsr)); + qqueueChkPersist(pThis); finalize_it: if(pThis->qType != QUEUETYPE_DIRECT) { /* make sure at least one worker is running. */ - queueAdviseMaxWorkers(pThis); - dbgoprint((obj_t*) pThis, "EnqueueMsg advised worker start\n"); + qqueueAdviseMaxWorkers(pThis); /* and release the mutex */ d_pthread_mutex_unlock(pThis->mut); pthread_setcancelstate(iCancelStateSave, NULL); + dbgoprint((obj_t*) pThis, "EnqueueMsg advised worker start\n"); + /* the following pthread_yield is experimental, but brought us performance + * benefit. For details, please see http://kb.monitorware.com/post14216.html#p14216 + * rgerhards, 2008-10-09 + * but this is only true for uniprocessors, so we guard it with an optimize flag -- rgerhards, 2008-10-22 + */ + if(pThis->bOptimizeUniProc) + pthread_yield(); } RETiRet; @@ -2217,12 +2235,12 @@ finalize_it: * rgerhards, 2008-01-16 */ static rsRetVal -queueSetEnqOnly(queue_t *pThis, int bEnqOnly, int bLockMutex) +qqueueSetEnqOnly(qqueue_t *pThis, int bEnqOnly, int bLockMutex) { DEFiRet; DEFVARS_mutexProtection; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); /* for simplicity, we do one big mutex lock. This method is extremely seldom * called, so that doesn't matter... -- rgerhards, 2008-01-16 @@ -2261,24 +2279,24 @@ finalize_it: /* some simple object access methods */ -DEFpropSetMeth(queue, iPersistUpdCnt, int) -DEFpropSetMeth(queue, iDeqtWinFromHr, int) -DEFpropSetMeth(queue, iDeqtWinToHr, int) -DEFpropSetMeth(queue, toQShutdown, long) -DEFpropSetMeth(queue, toActShutdown, long) -DEFpropSetMeth(queue, toWrkShutdown, long) -DEFpropSetMeth(queue, toEnq, long) -DEFpropSetMeth(queue, iHighWtrMrk, int) -DEFpropSetMeth(queue, iLowWtrMrk, int) -DEFpropSetMeth(queue, iDiscardMrk, int) -DEFpropSetMeth(queue, iFullDlyMrk, int) -DEFpropSetMeth(queue, iDiscardSeverity, int) -DEFpropSetMeth(queue, bIsDA, int) -DEFpropSetMeth(queue, iMinMsgsPerWrkr, int) -DEFpropSetMeth(queue, bSaveOnShutdown, int) -DEFpropSetMeth(queue, pUsr, void*) -DEFpropSetMeth(queue, iDeqSlowdown, int) -DEFpropSetMeth(queue, sizeOnDiskMax, int64) +DEFpropSetMeth(qqueue, iPersistUpdCnt, int) +DEFpropSetMeth(qqueue, iDeqtWinFromHr, int) +DEFpropSetMeth(qqueue, iDeqtWinToHr, int) +DEFpropSetMeth(qqueue, toQShutdown, long) +DEFpropSetMeth(qqueue, toActShutdown, long) +DEFpropSetMeth(qqueue, toWrkShutdown, long) +DEFpropSetMeth(qqueue, toEnq, long) +DEFpropSetMeth(qqueue, iHighWtrMrk, int) +DEFpropSetMeth(qqueue, iLowWtrMrk, int) +DEFpropSetMeth(qqueue, iDiscardMrk, int) +DEFpropSetMeth(qqueue, iFullDlyMrk, int) +DEFpropSetMeth(qqueue, iDiscardSeverity, int) +DEFpropSetMeth(qqueue, bIsDA, int) +DEFpropSetMeth(qqueue, iMinMsgsPerWrkr, int) +DEFpropSetMeth(qqueue, bSaveOnShutdown, int) +DEFpropSetMeth(qqueue, pUsr, void*) +DEFpropSetMeth(qqueue, iDeqSlowdown, int) +DEFpropSetMeth(qqueue, sizeOnDiskMax, int64) /* This function can be used as a generic way to set properties. Only the subset @@ -2287,11 +2305,11 @@ DEFpropSetMeth(queue, sizeOnDiskMax, int64) * rgerhards, 2008-01-11 */ #define isProp(name) !rsCStrSzStrCmp(pProp->pcsName, (uchar*) name, sizeof(name) - 1) -static rsRetVal queueSetProperty(queue_t *pThis, var_t *pProp) +static rsRetVal qqueueSetProperty(qqueue_t *pThis, var_t *pProp) { DEFiRet; - ISOBJ_TYPE_assert(pThis, queue); + ISOBJ_TYPE_assert(pThis, qqueue); ASSERT(pProp != NULL); if(isProp("iQueueSize")) { @@ -2313,19 +2331,19 @@ finalize_it: #undef isProp /* dummy */ -rsRetVal queueQueryInterface(void) { return RS_RET_NOT_IMPLEMENTED; } +rsRetVal qqueueQueryInterface(void) { return RS_RET_NOT_IMPLEMENTED; } /* Initialize the stream class. Must be called as the very first method * before anything else is called inside this class. * rgerhards, 2008-01-09 */ -BEGINObjClassInit(queue, 1, OBJ_IS_CORE_MODULE) +BEGINObjClassInit(qqueue, 1, OBJ_IS_CORE_MODULE) /* request objects we use */ CHKiRet(objUse(glbl, CORE_COMPONENT)); /* now set our own handlers */ - OBJSetMethodHandler(objMethod_SETPROPERTY, queueSetProperty); -ENDObjClassInit(queue) + OBJSetMethodHandler(objMethod_SETPROPERTY, qqueueSetProperty); +ENDObjClassInit(qqueue) /* vi:set ai: */ diff --git a/runtime/queue.h b/runtime/queue.h index 9e75b31b..a267862d 100644 --- a/runtime/queue.h +++ b/runtime/queue.h @@ -58,6 +58,7 @@ typedef struct qWrkThrd_s { typedef struct queue_s { BEGINobjInstance; queueType_t qType; + int bOptimizeUniProc; /* cache for the equally-named global setting, pulled at time of queue creation */ int bEnqOnly; /* does queue run in enqueue-only mode (1) or not (0)? */ int bSaveOnShutdown;/* persists everthing on shutdown (if DA!)? 1-yes, 0-no */ int bQueueStarted; /* has queueStart() been called on this queue? 1-yes, 0-no */ @@ -159,7 +160,7 @@ typedef struct queue_s { strm_t *pRead; /* current file to be read */ } disk; } tVars; -} queue_t; +} qqueue_t; /* some symbolic constants for easier reference */ #define QUEUE_MODE_ENQDEQ 0 @@ -176,30 +177,30 @@ typedef struct queue_s { #define QUEUE_TIMEOUT_ETERNAL 24 * 60 * 60 * 1000 /* prototypes */ -rsRetVal queueDestruct(queue_t **ppThis); -rsRetVal queueEnqObj(queue_t *pThis, flowControl_t flwCtlType, void *pUsr); -rsRetVal queueStart(queue_t *pThis); -rsRetVal queueSetMaxFileSize(queue_t *pThis, size_t iMaxFileSize); -rsRetVal queueSetFilePrefix(queue_t *pThis, uchar *pszPrefix, size_t iLenPrefix); -rsRetVal queueConstruct(queue_t **ppThis, queueType_t qType, int iWorkerThreads, +rsRetVal qqueueDestruct(qqueue_t **ppThis); +rsRetVal qqueueEnqObj(qqueue_t *pThis, flowControl_t flwCtlType, void *pUsr); +rsRetVal qqueueStart(qqueue_t *pThis); +rsRetVal qqueueSetMaxFileSize(qqueue_t *pThis, size_t iMaxFileSize); +rsRetVal qqueueSetFilePrefix(qqueue_t *pThis, uchar *pszPrefix, size_t iLenPrefix); +rsRetVal qqueueConstruct(qqueue_t **ppThis, queueType_t qType, int iWorkerThreads, int iMaxQueueSize, rsRetVal (*pConsumer)(void*,void*)); -PROTOTYPEObjClassInit(queue); -PROTOTYPEpropSetMeth(queue, iPersistUpdCnt, int); -PROTOTYPEpropSetMeth(queue, iDeqtWinFromHr, int); -PROTOTYPEpropSetMeth(queue, iDeqtWinToHr, int); -PROTOTYPEpropSetMeth(queue, toQShutdown, long); -PROTOTYPEpropSetMeth(queue, toActShutdown, long); -PROTOTYPEpropSetMeth(queue, toWrkShutdown, long); -PROTOTYPEpropSetMeth(queue, toEnq, long); -PROTOTYPEpropSetMeth(queue, iHighWtrMrk, int); -PROTOTYPEpropSetMeth(queue, iLowWtrMrk, int); -PROTOTYPEpropSetMeth(queue, iDiscardMrk, int); -PROTOTYPEpropSetMeth(queue, iDiscardSeverity, int); -PROTOTYPEpropSetMeth(queue, iMinMsgsPerWrkr, int); -PROTOTYPEpropSetMeth(queue, bSaveOnShutdown, int); -PROTOTYPEpropSetMeth(queue, pUsr, void*); -PROTOTYPEpropSetMeth(queue, iDeqSlowdown, int); -PROTOTYPEpropSetMeth(queue, sizeOnDiskMax, int64); -#define queueGetID(pThis) ((unsigned long) pThis) +PROTOTYPEObjClassInit(qqueue); +PROTOTYPEpropSetMeth(qqueue, iPersistUpdCnt, int); +PROTOTYPEpropSetMeth(qqueue, iDeqtWinFromHr, int); +PROTOTYPEpropSetMeth(qqueue, iDeqtWinToHr, int); +PROTOTYPEpropSetMeth(qqueue, toQShutdown, long); +PROTOTYPEpropSetMeth(qqueue, toActShutdown, long); +PROTOTYPEpropSetMeth(qqueue, toWrkShutdown, long); +PROTOTYPEpropSetMeth(qqueue, toEnq, long); +PROTOTYPEpropSetMeth(qqueue, iHighWtrMrk, int); +PROTOTYPEpropSetMeth(qqueue, iLowWtrMrk, int); +PROTOTYPEpropSetMeth(qqueue, iDiscardMrk, int); +PROTOTYPEpropSetMeth(qqueue, iDiscardSeverity, int); +PROTOTYPEpropSetMeth(qqueue, iMinMsgsPerWrkr, int); +PROTOTYPEpropSetMeth(qqueue, bSaveOnShutdown, int); +PROTOTYPEpropSetMeth(qqueue, pUsr, void*); +PROTOTYPEpropSetMeth(qqueue, iDeqSlowdown, int); +PROTOTYPEpropSetMeth(qqueue, sizeOnDiskMax, int64); +#define qqueueGetID(pThis) ((unsigned long) pThis) #endif /* #ifndef QUEUE_H_INCLUDED */ diff --git a/runtime/rsyslog.c b/runtime/rsyslog.c index 54db12c2..8df100a1 100644 --- a/runtime/rsyslog.c +++ b/runtime/rsyslog.c @@ -157,7 +157,7 @@ rsrtInit(char **ppErrObj, obj_if_t *pObjIF) if(ppErrObj != NULL) *ppErrObj = "wtp"; CHKiRet(wtpClassInit(NULL)); if(ppErrObj != NULL) *ppErrObj = "queue"; - CHKiRet(queueClassInit(NULL)); + CHKiRet(qqueueClassInit(NULL)); if(ppErrObj != NULL) *ppErrObj = "vmstk"; CHKiRet(vmstkClassInit(NULL)); if(ppErrObj != NULL) *ppErrObj = "sysvar"; diff --git a/runtime/rsyslog.h b/runtime/rsyslog.h index 9ce58210..835fff27 100644 --- a/runtime/rsyslog.h +++ b/runtime/rsyslog.h @@ -84,6 +84,14 @@ typedef rsRetVal (*errLogFunc_t)(uchar*); /* this is a trick to store a function typedef struct permittedPeers_s permittedPeers_t; /* this should go away in the long term -- rgerhards, 2008-05-19 */ typedef struct permittedPeerWildcard_s permittedPeerWildcard_t; /* this should go away in the long term -- rgerhards, 2008-05-19 */ typedef struct tcpsrv_s tcpsrv_t; +typedef struct tcps_sess_s tcps_sess_t; +typedef struct strmsrv_s strmsrv_t; +typedef struct strms_sess_s strms_sess_t; +typedef struct vmstk_s vmstk_t; +typedef rsRetVal (*prsf_t)(struct vmstk_s*, int); /* pointer to a RainerScript function */ + +typedef struct tcpLstnPortList_s tcpLstnPortList_t; // TODO: rename? +typedef struct strmLstnPortList_s strmLstnPortList_t; // TODO: rename? /* some universal 64 bit define... */ typedef long long int64; @@ -95,6 +103,8 @@ typedef unsigned int u_int32_t; /* TODO: is this correct? */ typedef int socklen_t; #endif +typedef char bool; /* I intentionally use char, to keep it slim so that many fit into the CPU cache! */ + /* settings for flow control * TODO: is there a better place for them? -- rgerhards, 2008-03-14 */ @@ -252,8 +262,25 @@ enum rsRetVal_ /** return value. All methods return this if not specified oth RS_RET_QUEUE_FULL = -2105, /**< queue is full, operation could not be completed */ RS_RET_ACCEPT_ERR = -2106, /**< error during accept() system call */ RS_RET_INVLD_TIME = -2107, /**< invalid timestamp (e.g. could not be parsed) */ + RS_RET_NO_ZIP = -2108, /**< ZIP functionality is not present */ RS_RET_CODE_ERR = -2109, /**< program code (internal) error */ - RS_RET_NONFATAL_CONFIG_ERR = -2123, /**< non-fatal error during config processing */ + RS_RET_FUNC_NO_LPAREN = -2110, /**< left parenthesis missing after function call (rainerscript) */ + RS_RET_FUNC_MISSING_EXPR = -2111, /**< no expression after comma in function call (rainerscript) */ + RS_RET_INVLD_NBR_ARGUMENTS = -2112, /**< invalid number of arguments for function call (rainerscript) */ + RS_RET_INVLD_FUNC = -2113, /**< invalid function name for function call (rainerscript) */ + RS_RET_DUP_FUNC_NAME = -2114, /**< duplicate function name (rainerscript) */ + RS_RET_UNKNW_FUNC = -2115, /**< unkown function name (rainerscript) */ + RS_RET_ERR_RLIM_NOFILE = -2116, /**< error setting max. nbr open files process limit */ + RS_RET_ERR_CREAT_PIPE = -2117, /**< error during pipe creation */ + RS_RET_ERR_FORK = -2118, /**< error during fork() */ + RS_RET_ERR_WRITE_PIPE = -2119, /**< error writing to pipe */ + RS_RET_RSCORE_TOO_OLD = -2120, /**< rsyslog core is too old for ... (eg this plugin) */ + RS_RET_DEFER_COMMIT = -2121, /**< output plugin status: not yet committed (an OK state!) */ + RS_RET_PREVIOUS_COMMITTED = -2122, /**< output plugin status: previous record was committed (an OK state!) */ + RS_RET_ACTION_FAILED = -2123, /**< action failed and is now suspended (consider this permanent for the time being) */ + RS_RET_NONFATAL_CONFIG_ERR = -2124, /**< non-fatal error during config processing */ + RS_RET_FILENAME_INVALID = -2140, /**< filename invalid, not found, no access, ... */ + RS_RET_EMPTY_MSG = -2143, /**< provided (raw) MSG is empty */ /* RainerScript error messages (range 1000.. 1999) */ RS_RET_SYSVAR_NOT_FOUND = 1001, /**< system variable could not be found (maybe misspelled) */ @@ -337,9 +364,15 @@ typedef enum rsObjectID rsObjID; # define __attribute__(x) /*NOTHING*/ #endif +#ifndef O_CLOEXEC +/* of course, this limits the functionality... */ +# define O_CLOEXEC 0 +#endif + /* The following prototype is convenient, even though it may not be the 100% correct place.. -- rgerhards 2008-01-07 */ void dbgprintf(char *, ...) __attribute__((format(printf, 1, 2))); + #include "debug.h" #include "obj.h" diff --git a/runtime/srutils.c b/runtime/srutils.c index 97cc3252..d01ca20d 100644 --- a/runtime/srutils.c +++ b/runtime/srutils.c @@ -371,6 +371,7 @@ int getNumberDigits(long lNum) rsRetVal timeoutComp(struct timespec *pt, long iTimeout) { + BEGINfunc assert(pt != NULL); /* compute timeout */ clock_gettime(CLOCK_REALTIME, pt); @@ -379,6 +380,7 @@ timeoutComp(struct timespec *pt, long iTimeout) pt->tv_nsec -= 1000000000; } pt->tv_sec += iTimeout / 1000; + ENDfunc return RS_RET_OK; /* so far, this is static... */ } @@ -393,6 +395,7 @@ timeoutVal(struct timespec *pt) { struct timespec t; long iTimeout; + BEGINfunc assert(pt != NULL); /* compute timeout */ @@ -403,6 +406,7 @@ timeoutVal(struct timespec *pt) if(iTimeout < 0) iTimeout = 0; + ENDfunc return iTimeout; } @@ -454,7 +458,7 @@ srSleep(int iSeconds, int iuSeconds) * Added 2008-01-30 */ char *rs_strerror_r(int errnum, char *buf, size_t buflen) { -#ifdef __hpux +#ifndef HAVE_STRERROR_R char *pszErr; pszErr = strerror(errnum); snprintf(buf, buflen, "%s", pszErr); diff --git a/runtime/stream.c b/runtime/stream.c index f1f69cc8..1cff2da6 100644 --- a/runtime/stream.c +++ b/runtime/stream.c @@ -368,7 +368,7 @@ strmReadLine(strm_t *pThis, cstr_t **ppCStr) CHKiRet(rsCStrAppendChar(*ppCStr, c)); CHKiRet(strmReadChar(pThis, &c)); } - CHKiRet(rsCStrFinish(*ppCStr)); + CHKiRet(cstrFinalize(*ppCStr)); finalize_it: if(iRet != RS_RET_OK && *ppCStr != NULL) diff --git a/runtime/stringbuf.c b/runtime/stringbuf.c index 63b42348..a2d9c599 100644 --- a/runtime/stringbuf.c +++ b/runtime/stringbuf.c @@ -6,8 +6,9 @@ * Please see syslogd.c for license information. * All functions in this "class" start with rsCStr (rsyslog Counted String). * begun 2005-09-07 rgerhards + * did some optimization (read: bugs!) rgerhards, 2009-06-16 * - * Copyright (C) 2007-2008 by Rainer Gerhards and Adiscon GmbH + * Copyright (C) 2007-2009 by Rainer Gerhards and Adiscon GmbH * * This file is part of the rsyslog runtime library. * @@ -40,6 +41,7 @@ #include "regexp.h" #include "obj.h" +uchar* rsCStrGetSzStr(cstr_t *pThis); /* ################################################################# * * private members * @@ -54,15 +56,14 @@ DEFobjCurrIf(regexp) * ################################################################# */ -rsRetVal rsCStrConstruct(cstr_t **ppThis) +rsRetVal cstrConstruct(cstr_t **ppThis) { DEFiRet; cstr_t *pThis; ASSERT(ppThis != NULL); - if((pThis = (cstr_t*) calloc(1, sizeof(cstr_t))) == NULL) - ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); + CHKmalloc(pThis = (cstr_t*) calloc(1, sizeof(cstr_t))); rsSETOBJTYPE(pThis, OIDrsCStr); pThis->pBuf = NULL; @@ -89,7 +90,7 @@ rsRetVal rsCStrConstructFromszStr(cstr_t **ppThis, uchar *sz) CHKiRet(rsCStrConstruct(&pThis)); - pThis->iBufSize = pThis->iStrLen = strlen((char*)(char *) sz); + pThis->iBufSize = pThis->iStrLen = strlen((char *) sz); if((pThis->pBuf = (uchar*) malloc(sizeof(uchar) * pThis->iStrLen)) == NULL) { RSFREEOBJ(pThis); ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); @@ -137,24 +138,8 @@ void rsCStrDestruct(cstr_t **ppThis) { cstr_t *pThis = *ppThis; - /* rgerhards 2005-10-19: The free of pBuf was contained in conditional compilation. - * The code was only compiled if STRINGBUF_TRIM_ALLOCSIZE was set to 1. I honestly - * do not know why it was so, I think it was an artifact. Anyhow, I have changed this - * now. Should there any issue occur, this comment hopefully will shed some light - * on what happened. I re-verified, and this function has never before been called - * by anyone. So changing it can have no impact for obvious reasons... - * - * rgerhards, 2008-02-20: I changed the interface to the new calling conventions, where - * the destructor receives a pointer to the object, so that it can set it to NULL. - */ - if(pThis->pBuf != NULL) { - free(pThis->pBuf); - } - - if(pThis->pszBuf != NULL) { - free(pThis->pszBuf); - } - + free(pThis->pBuf); + free(pThis->pszBuf); RSFREEOBJ(pThis); *ppThis = NULL; } @@ -166,12 +151,14 @@ void rsCStrDestruct(cstr_t **ppThis) * allocated. In practice, a bit more is allocated because we envision that * some more characters may be added after these. * rgerhards, 2008-01-07 + * changed to utilized realloc() -- rgerhards, 2009-06-16 */ -static rsRetVal rsCStrExtendBuf(cstr_t *pThis, size_t iMinNeeded) +static rsRetVal +rsCStrExtendBuf(cstr_t *pThis, size_t iMinNeeded) { - DEFiRet; uchar *pNewBuf; size_t iNewSize; + DEFiRet; /* first compute the new size needed */ if(iMinNeeded > pThis->iAllocIncrement) { @@ -187,15 +174,9 @@ static rsRetVal rsCStrExtendBuf(cstr_t *pThis, size_t iMinNeeded) } iNewSize += pThis->iBufSize; /* add current size */ - /* and then allocate and copy over */ /* DEV debugging only: dbgprintf("extending string buffer, old %d, new %d\n", pThis->iBufSize, iNewSize); */ - if((pNewBuf = (uchar*) malloc(iNewSize * sizeof(uchar))) == NULL) - ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); - memcpy(pNewBuf, pThis->pBuf, pThis->iBufSize); + CHKmalloc(pNewBuf = (uchar*) realloc(pThis->pBuf, iNewSize * sizeof(uchar))); pThis->iBufSize = iNewSize; - if(pThis->pBuf != NULL) { - free(pThis->pBuf); - } pThis->pBuf = pNewBuf; finalize_it: @@ -288,6 +269,29 @@ finalize_it: } +/* NEW VARIANT + * Append a character to the current string object. This may only be done until + * cstrFinalize() is called. + * rgerhards, 2009-06-16 + */ +rsRetVal cstrAppendChar(cstr_t *pThis, uchar c) +{ + DEFiRet; + + rsCHECKVALIDOBJECT(pThis, OIDrsCStr); + + if(pThis->iStrLen >= pThis->iBufSize) { + CHKiRet(rsCStrExtendBuf(pThis, 1)); /* need more memory! */ + } + + /* ok, when we reach this, we have sufficient memory */ + *(pThis->pBuf + pThis->iStrLen++) = c; + +finalize_it: + RETiRet; +} + + /* Sets the string object to the classigal sz-string provided. * Any previously stored vlaue is discarded. If a NULL pointer * the the new value (pszNew) is provided, an empty string is @@ -299,10 +303,8 @@ rsRetVal rsCStrSetSzStr(cstr_t *pThis, uchar *pszNew) { rsCHECKVALIDOBJECT(pThis, OIDrsCStr); - if(pThis->pBuf != NULL) - free(pThis->pBuf); - if(pThis->pszBuf != NULL) - free(pThis->pszBuf); + free(pThis->pBuf); + free(pThis->pszBuf); if(pszNew == NULL) { pThis->iStrLen = 0; pThis->iBufSize = 0; @@ -390,35 +392,42 @@ uchar* rsCStrGetSzStr(cstr_t *pThis) } +/* NEW VERSION for interface without separate psz buffer! */ +/* Returns the cstr data as a classical C sz string. We use that the + * Finalizer did properly terminate our string (but we may stil be NULL). + * So it is vital that the finalizer is called BEFORe this function here! + * The caller must not free or otherwise manipulate the returned string and must not + * destroy the CStr object as long as the ascii string is used. + * This function may return NULL, if the string is currently NULL. This + * is a feature, not a bug. If you need non-NULL in any case, use + * cstrGetSzStrNoNULL() instead. + * Note that due to the new single-buffer interface this function almost does nothing! + * rgerhards, 2006-09-16 + */ +uchar* cstrGetSzStr(cstr_t *pThis) +{ + rsCHECKVALIDOBJECT(pThis, OIDrsCStr); + return(pThis->pBuf); +} + + /* Converts the CStr object to a classical zero-terminated C string, * returns that string and destroys the CStr object. The returned string * MUST be freed by the caller. The function might return NULL if * no memory can be allocated. * - * TODO: - * This function should at some time become special. The base idea is to - * add one extra byte to the end of the regular buffer, so that we can - * convert it to an szString without the need to copy. The extra memory - * footprint is not hefty, but the performance gain is potentially large. - * To get it done now, I am not doing the optimiziation right now. - * rgerhards, 2005-09-07 + * This is the NEW replacement for rsCStrConvSzStrAndDestruct which does + * no longer utilize a special buffer but soley works on pBuf (and also + * assumes that cstrFinalize had been called). * - * rgerhards, 2007-09-04: I have changed the interface of this function. It now - * returns an rsRetVal, so that we can communicate back if we have an error. - * Using the standard method is much better than returning NULL. Secondly, NULL - * was not actually an error - it was in indication if the string was empty. - * This was needed in some parts of the code, in others not. I have now added - * a second parameter to specify what the caller needs. I hope these changes - * will make it less likely that the function is called incorrectly, what - * previously happend quite often and was the cause of a number of program - * aborts. So the parameters are now: + * Parameters are as follows: * pointer to the object, pointer to string-pointer to receive string and * bRetNULL: 0 - must not return NULL on empty string, return "" in that * case, 1 - return NULL instead of an empty string. * PLEASE NOTE: the caller must free the memory returned in ppSz in any case * (except, of course, if it is NULL). */ -rsRetVal rsCStrConvSzStrAndDestruct(cstr_t *pThis, uchar **ppSz, int bRetNULL) +rsRetVal cstrConvSzStrAndDestruct(cstr_t *pThis, uchar **ppSz, int bRetNULL) { DEFiRet; uchar* pRetBuf; @@ -429,14 +438,13 @@ rsRetVal rsCStrConvSzStrAndDestruct(cstr_t *pThis, uchar **ppSz, int bRetNULL) if(pThis->pBuf == NULL) { if(bRetNULL == 0) { - if((pRetBuf = malloc(sizeof(uchar))) == NULL) - ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); + CHKmalloc(pRetBuf = malloc(sizeof(uchar))); *pRetBuf = '\0'; } else { pRetBuf = NULL; } } else - pRetBuf = rsCStrGetSzStr(pThis); + pRetBuf = pThis->pBuf; *ppSz = pRetBuf; @@ -445,60 +453,39 @@ finalize_it: * that we can NOT use the rsCStrDestruct function as it would * also free the sz String buffer, which we pass on to the user. */ - if(pThis->pBuf != NULL) - free(pThis->pBuf); RSFREEOBJ(pThis); - RETiRet; } -#if STRINGBUF_TRIM_ALLOCSIZE == 1 - /* Only in this mode, we need to trim the string. To do - * so, we must allocate a new buffer of the exact - * string size, and then copy the old one over. - */ - /* WARNING - * STRINGBUF_TRIM_ALLOCSIZE can, in theory, be used to trim - * memory buffers. This part of the code was inherited from - * liblogging (where it is used in a different context) but - * never put to use in rsyslog. The reason is that it is hardly - * imaginable where the extra performance cost is worth the save - * in memory alloc. Then Anders Blomdel rightfully pointed out that - * the code does not work at all - and nobody even know that it - * probably shouldn't. Rather than removing, I deciced to somewhat - * fix the code, so that this feature may be enabled if somebody - * really has a need for it. Be warned, however, that I NEVER - * tested the fix. So if you intend to use this feature, you must - * do full testing before you rely on it. -- rgerhards, 2008-02-12 - */ -rsRetVal rsCStrFinish(cstr_t __attribute__((unused)) *pThis) +/* Finalize the string object. This must be called after all data is added to it + * but before that data is used. + * rgerhards, 2009-06-16 + */ +rsRetVal +cstrFinalize(cstr_t *pThis) { DEFiRet; - uchar* pBuf; rsCHECKVALIDOBJECT(pThis, OIDrsCStr); + + assert(pThis->bIsFinalized == 0); - if((pBuf = malloc((pThis->iStrLen) * sizeof(uchar))) == NULL) - { /* OK, in this case we use the previous buffer. At least - * we have it ;) - */ - } - else - { /* got the new buffer, so let's use it */ - memcpy(pBuf, pThis->pBuf, pThis->iStrLen); - pThis->pBuf = pBuf; + if(pThis->iStrLen > 0) { + /* terminate string only if one exists */ + CHKiRet(cstrAppendChar(pThis, '\0')); + --pThis->iStrLen; /* do NOT count the \0 byte */ } + pThis->bIsFinalized = 1; +finalize_it: RETiRet; } -#endif /* #if STRINGBUF_TRIM_ALLOCSIZE == 1 */ void rsCStrSetAllocIncrement(cstr_t *pThis, int iNewIncrement) { rsCHECKVALIDOBJECT(pThis, OIDrsCStr); assert(iNewIncrement > 0); - pThis->iAllocIncrement = iNewIncrement; } @@ -694,6 +681,7 @@ int rsCStrCaseInsensitveStartsWithSzStr(cstr_t *pCS1, uchar *psz, size_t iLenSz) return -1; /* pCS1 is less then psz */ } + /* check if a CStr object matches a regex. * msamia@redhat.com 2007-07-12 * @return returns 0 if matched @@ -701,25 +689,54 @@ int rsCStrCaseInsensitveStartsWithSzStr(cstr_t *pCS1, uchar *psz, size_t iLenSz) * rgerhards, 2007-07-16: bug is no real bug, because rsyslogd ensures there * never is a \0 *inside* a property string. * Note that the function returns -1 if regexp functionality is not available. - * TODO: change calling interface! -- rgerhards, 2008-03-07 + * rgerhards: 2009-03-04: ERE support added, via parameter iType: 0 - BRE, 1 - ERE + * Arnaud Cornet/rgerhards: 2009-04-02: performance improvement by caching compiled regex + * If a caller does not need the cached version, it must still provide memory for it + * and must call rsCStrRegexDestruct() afterwards. */ -int rsCStrSzStrMatchRegex(cstr_t *pCS1, uchar *psz) +rsRetVal rsCStrSzStrMatchRegex(cstr_t *pCS1, uchar *psz, int iType, void *rc) { - regex_t preq; + regex_t **cache = (regex_t**) rc; int ret; + DEFiRet; - BEGINfunc + assert(pCS1 != NULL); + assert(psz != NULL); + assert(cache != NULL); if(objUse(regexp, LM_REGEXP_FILENAME) == RS_RET_OK) { - regexp.regcomp(&preq, (char*) rsCStrGetSzStr(pCS1), 0); - ret = regexp.regexec(&preq, (char*) psz, 0, NULL, 0); - regexp.regfree(&preq); + if (*cache == NULL) { + *cache = calloc(sizeof(regex_t), 1); + regexp.regcomp(*cache, (char*) rsCStrGetSzStr(pCS1), (iType == 1 ? REG_EXTENDED : 0) | REG_NOSUB); + } + ret = regexp.regexec(*cache, (char*) psz, 0, NULL, 0); + if(ret != 0) + ABORT_FINALIZE(RS_RET_NOT_FOUND); } else { - ret = 1; /* simulate "not found" */ + ABORT_FINALIZE(RS_RET_NOT_FOUND); } - ENDfunc - return ret; +finalize_it: + RETiRet; +} + + +/* free a cached compiled regex + * Caller must provide a pointer to a buffer that was created by + * rsCStrSzStrMatchRegexCache() + */ +void rsCStrRegexDestruct(void *rc) +{ + regex_t **cache = rc; + + assert(cache != NULL); + assert(*cache != NULL); + + if(objUse(regexp, LM_REGEXP_FILENAME) == RS_RET_OK) { + regexp.regfree(*cache); + free(*cache); + *cache = NULL; + } } @@ -997,56 +1014,6 @@ int rsCStrCaseInsensitiveLocateInSzStr(cstr_t *pThis, uchar *sz) } -#if 0 /* read comment below why this is commented out. In short: for future use! */ -/* locate the first occurence of a standard sz string inside a rsCStr object. - * Returns the offset (0-bound) of this first occurrence. If not found, -1 is - * returned. - * rgerhards 2005-09-19 - * WARNING: I accidently created this function (I later noticed I didn't relly - * need it... I will not remove the function, as it probably is useful - * some time later. However, it is not fully tested, so start with testing - * it before you put it to first use). - */ -int rsCStrLocateSzStr(cstr_t *pThis, uchar *sz) -{ - int iLenSz; - int i; - int iMax; - int bFound; - rsCHECKVALIDOBJECT(pThis, OIDrsCStr); - - if(sz == NULL) - return 0; - - iLenSz = strlen((char*)sz); - if(iLenSz == 0) - return 0; - - /* compute the largest index where a match could occur - after all, - * the to-be-located string must be able to be present in the - * searched string (it needs its size ;)). - */ - iMax = pThis->iStrLen - iLenSz; - - bFound = 0; - i = 0; - while(i < iMax && !bFound) { - int iCheck; - uchar *pComp = pThis->pBuf + i; - for(iCheck = 0 ; iCheck < iLenSz ; ++iCheck) - if(*(pComp + iCheck) != *(sz + iCheck)) - break; - if(iCheck == iLenSz) - bFound = 1; /* found! - else it wouldn't be equal */ - else - ++i; /* on to the next try */ - } - - return(bFound ? i : -1); -} -#endif /* end comment out */ - - /* our exit function. TODO: remove once converted to a class * rgerhards, 2008-03-11 */ @@ -1070,11 +1037,5 @@ finalize_it: } -/* - * Local variables: - * c-indent-level: 8 - * c-basic-offset: 8 - * tab-width: 8 - * End: - * vi:set ai: +/* vi:set ai: */ diff --git a/runtime/stringbuf.h b/runtime/stringbuf.h index c1966449..d28aee26 100644 --- a/runtime/stringbuf.h +++ b/runtime/stringbuf.h @@ -49,13 +49,15 @@ typedef struct cstr_s size_t iBufSize; /**< current maximum size of the string buffer */ size_t iStrLen; /**< length of the string in characters. */ size_t iAllocIncrement; /**< the amount of bytes the string should be expanded if it needs to */ + bool bIsFinalized; /**< is this object finished and ready for use? (a debug aid, may be removed later TODO 2009-06-16) */ } cstr_t; /** * Construct a rsCStr object. */ -rsRetVal rsCStrConstruct(cstr_t **ppThis); +rsRetVal cstrConstruct(cstr_t **ppThis); +#define rsCStrConstruct(x) cstrConstruct((x)) rsRetVal rsCStrConstructFromszStr(cstr_t **ppThis, uchar *sz); rsRetVal rsCStrConstructFromCStr(cstr_t **ppThis, cstr_t *pFrom); @@ -63,6 +65,7 @@ rsRetVal rsCStrConstructFromCStr(cstr_t **ppThis, cstr_t *pFrom); * Destruct the string buffer object. */ void rsCStrDestruct(cstr_t **ppThis); +#define cstrDestruct(x) rsCStrDestruct((x)) /** * Append a character to an existing string. If necessary, the @@ -71,6 +74,7 @@ void rsCStrDestruct(cstr_t **ppThis); * \param c Character to append to string. */ rsRetVal rsCStrAppendChar(cstr_t *pThis, uchar c); +rsRetVal cstrAppendChar(cstr_t *pThis, uchar c); /** * Truncate "n" number of characters from the end of the @@ -123,10 +127,9 @@ rsRetVal rsCStrAppendInt(cstr_t *pThis, long i); rsRetVal strExit(void); /* TODO: remove once we have a real object interface! */ -uchar* rsCStrGetSzStr(cstr_t *pThis); +uchar* __attribute__((deprecated)) rsCStrGetSzStr(cstr_t *pThis); uchar* rsCStrGetSzStrNoNULL(cstr_t *pThis); rsRetVal rsCStrSetSzStr(cstr_t *pThis, uchar *pszNew); -rsRetVal rsCStrConvSzStrAndDestruct(cstr_t *pThis, uchar **ppSz, int bRetNULL); int rsCStrCStrCmp(cstr_t *pCS1, cstr_t *pCS2); int rsCStrSzStrCmp(cstr_t *pCS1, uchar *psz, size_t iLenSz); int rsCStrOffsetSzStrCmp(cstr_t *pCS1, size_t iOffset, uchar *psz, size_t iLenSz); @@ -136,11 +139,17 @@ int rsCStrCaseInsensitiveLocateInSzStr(cstr_t *pThis, uchar *sz); int rsCStrStartsWithSzStr(cstr_t *pCS1, uchar *psz, size_t iLenSz); int rsCStrCaseInsensitveStartsWithSzStr(cstr_t *pCS1, uchar *psz, size_t iLenSz); int rsCStrSzStrStartsWithCStr(cstr_t *pCS1, uchar *psz, size_t iLenSz); -int rsCStrSzStrMatchRegex(cstr_t *pCS1, uchar *psz); +rsRetVal rsCStrSzStrMatchRegex(cstr_t *pCS1, uchar *psz, int iType, void *cache); +void rsCStrRegexDestruct(void *rc); rsRetVal rsCStrConvertToNumber(cstr_t *pStr, number_t *pNumber); rsRetVal rsCStrConvertToBool(cstr_t *pStr, number_t *pBool); rsRetVal rsCStrAppendCStr(cstr_t *pThis, cstr_t *pstrAppend); +/* new calling interface */ +rsRetVal cstrFinalize(cstr_t *pThis); +rsRetVal cstrConvSzStrAndDestruct(cstr_t *pThis, uchar **ppSz, int bRetNULL); +uchar* cstrGetSzStr(cstr_t *pThis); + /* now come inline-like functions */ #ifdef NDEBUG # define rsCStrLen(x) ((int)((x)->iStrLen)) @@ -148,19 +157,6 @@ rsRetVal rsCStrAppendCStr(cstr_t *pThis, cstr_t *pstrAppend); int rsCStrLen(cstr_t *pThis); #endif -#if STRINGBUF_TRIM_ALLOCSIZE != 1 -/* This is the normal case (see comment in rsCStrFinish!). In those cases, the function - * simply needs to do nothing, so that we can save us the function call. - * rgerhards, 2008-02-12 - */ -# define rsCStrFinish(pThis) RS_RET_OK -#else - /** - * Finish the string buffer dynamic allocation. - */ - rsRetVal rsCStrFinish(cstr_t *pThis); -#endif - #define rsCStrGetBufBeg(x) ((x)->pBuf) rsRetVal strInit(); diff --git a/runtime/strms_sess.c b/runtime/strms_sess.c new file mode 100644 index 00000000..0aeebe03 --- /dev/null +++ b/runtime/strms_sess.c @@ -0,0 +1,300 @@ +/* strms_sess.c + * + * This implements a session of the strmsrv object. For general + * comments, see header of strmsrv.c. + * + * Copyright 2007, 2008, 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of the rsyslog runtime library. + * + * The rsyslog runtime library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * The rsyslog runtime library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with the rsyslog runtime library. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + * A copy of the LGPL can be found in the file "COPYING.LESSER" in this distribution. + */ +#include "config.h" +#include <stdlib.h> +#include <string.h> +#include <assert.h> +#include <errno.h> +#include <ctype.h> + +#include "rsyslog.h" +#include "dirty.h" +#include "module-template.h" +#include "net.h" +#include "strmsrv.h" +#include "strms_sess.h" +#include "obj.h" +#include "errmsg.h" +#include "netstrm.h" +#include "msg.h" +#include "datetime.h" + + +/* static data */ +DEFobjStaticHelpers +DEFobjCurrIf(glbl) +DEFobjCurrIf(errmsg) +DEFobjCurrIf(netstrm) +DEFobjCurrIf(datetime) + +static int iMaxLine; /* maximum size of a single message */ + +/* forward definitions */ +static rsRetVal Close(strms_sess_t *pThis); + + +/* Standard-Constructor */ +BEGINobjConstruct(strms_sess) /* be sure to specify the object type also in END macro! */ +ENDobjConstruct(strms_sess) + + +/* ConstructionFinalizer + */ +static rsRetVal +strms_sessConstructFinalize(strms_sess_t *pThis) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strms_sess); + if(pThis->pSrv->OnSessConstructFinalize != NULL) { + CHKiRet(pThis->pSrv->OnSessConstructFinalize(&pThis->pUsr)); + } + +finalize_it: + RETiRet; +} + + +/* destructor for the strms_sess object */ +BEGINobjDestruct(strms_sess) /* be sure to specify the object type also in END and CODESTART macros! */ +CODESTARTobjDestruct(strms_sess) + if(pThis->pStrm != NULL) + netstrm.Destruct(&pThis->pStrm); + + if(pThis->pSrv->pOnSessDestruct != NULL) { + pThis->pSrv->pOnSessDestruct(&pThis->pUsr); + } + /* now destruct our own properties */ + free(pThis->fromHost); + free(pThis->fromHostIP); +ENDobjDestruct(strms_sess) + + +/* debugprint for the strms_sess object */ +BEGINobjDebugPrint(strms_sess) /* be sure to specify the object type also in END and CODESTART macros! */ +CODESTARTobjDebugPrint(strms_sess) +ENDobjDebugPrint(strms_sess) + + +/* set property functions */ +/* set the hostname. Note that the caller *hands over* the string. That is, + * the caller no longer controls it once SetHost() has received it. Most importantly, + * the caller must not free it. -- rgerhards, 2008-04-24 + */ +static rsRetVal +SetHost(strms_sess_t *pThis, uchar *pszHost) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strms_sess); + free(pThis->fromHost); + pThis->fromHost = pszHost; + RETiRet; +} + +/* set the remote host's IP. Note that the caller *hands over* the string. That is, + * the caller no longer controls it once SetHostIP() has received it. Most importantly, + * the caller must not free it. -- rgerhards, 2008-05-16 + */ +static rsRetVal +SetHostIP(strms_sess_t *pThis, uchar *pszHostIP) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strms_sess); + free(pThis->fromHostIP); + pThis->fromHostIP = pszHostIP; + RETiRet; +} + +static rsRetVal +SetStrm(strms_sess_t *pThis, netstrm_t *pStrm) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strms_sess); + pThis->pStrm = pStrm; + RETiRet; +} + + +/* set our parent, the strmsrv object */ +static rsRetVal +SetStrmsrv(strms_sess_t *pThis, strmsrv_t *pSrv) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strms_sess); + ISOBJ_TYPE_assert(pSrv, strmsrv); + pThis->pSrv = pSrv; + RETiRet; +} + + +/* set our parent listener info*/ +static rsRetVal +SetLstnInfo(strms_sess_t *pThis, strmLstnPortList_t *pLstnInfo) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strms_sess); + assert(pLstnInfo != NULL); + pThis->pLstnInfo = pLstnInfo; + RETiRet; +} + + +static rsRetVal +SetUsrP(strms_sess_t *pThis, void *pUsr) +{ + DEFiRet; + pThis->pUsr = pUsr; + RETiRet; +} + + +static void * +GetUsrP(strms_sess_t *pThis) +{ + return pThis->pUsr; +} + + +/* Closes a STRM session + * No attention is paid to the return code + * of close, so potential-double closes are not detected. + */ +static rsRetVal +Close(strms_sess_t *pThis) +{ + DEFiRet; + + ISOBJ_TYPE_assert(pThis, strms_sess); + netstrm.Destruct(&pThis->pStrm); + free(pThis->fromHost); + pThis->fromHost = NULL; /* not really needed, but... */ + free(pThis->fromHostIP); + pThis->fromHostIP = NULL; /* not really needed, but... */ + + RETiRet; +} + + + +/* Processes the data received via a STRM session. If there + * is no other way to handle it, data is discarded. + * Input parameter data is the data received, iLen is its + * len as returned from recv(). iLen must be 1 or more (that + * is errors must be handled by caller!). iSTRMSess must be + * the index of the STRM session that received the data. + * rgerhards 2005-07-04 + * And another change while generalizing. We now return either + * RS_RET_OK, which means the session should be kept open + * or anything else, which means it must be closed. + * rgerhards, 2008-03-01 + */ +static rsRetVal +DataRcvd(strms_sess_t *pThis, char *pData, size_t iLen) +{ + DEFiRet; + char *pEnd; + + ISOBJ_TYPE_assert(pThis, strms_sess); + assert(pData != NULL); + assert(iLen > 0); + + /* We now copy the message to the session buffer. */ + pEnd = pData + iLen; /* this is one off, which is intensional */ + + while(pData < pEnd) { + CHKiRet(pThis->pSrv->OnCharRcvd(pThis, (uchar)*pData++)); + } + +finalize_it: + RETiRet; +} + + +/* queryInterface function + * rgerhards, 2008-02-29 + */ +BEGINobjQueryInterface(strms_sess) +CODESTARTobjQueryInterface(strms_sess) + if(pIf->ifVersion != strms_sessCURR_IF_VERSION) { /* check for current version, increment on each change */ + ABORT_FINALIZE(RS_RET_INTERFACE_NOT_SUPPORTED); + } + + /* ok, we have the right interface, so let's fill it + * Please note that we may also do some backwards-compatibility + * work here (if we can support an older interface version - that, + * of course, also affects the "if" above). + */ + pIf->DebugPrint = strms_sessDebugPrint; + pIf->Construct = strms_sessConstruct; + pIf->ConstructFinalize = strms_sessConstructFinalize; + pIf->Destruct = strms_sessDestruct; + + pIf->Close = Close; + pIf->DataRcvd = DataRcvd; + + pIf->SetUsrP = SetUsrP; + pIf->GetUsrP = GetUsrP; + pIf->SetStrmsrv = SetStrmsrv; + pIf->SetLstnInfo = SetLstnInfo; + pIf->SetHost = SetHost; + pIf->SetHostIP = SetHostIP; + pIf->SetStrm = SetStrm; +finalize_it: +ENDobjQueryInterface(strms_sess) + + +/* exit our class + * rgerhards, 2008-03-10 + */ +BEGINObjClassExit(strms_sess, OBJ_IS_LOADABLE_MODULE) /* CHANGE class also in END MACRO! */ +CODESTARTObjClassExit(strms_sess) + /* release objects we no longer need */ + objRelease(errmsg, CORE_COMPONENT); + objRelease(netstrm, LM_NETSTRMS_FILENAME); + objRelease(datetime, CORE_COMPONENT); +ENDObjClassExit(strms_sess) + + +/* Initialize our class. Must be called as the very first method + * before anything else is called inside this class. + * rgerhards, 2008-02-29 + */ +BEGINObjClassInit(strms_sess, 1, OBJ_IS_CORE_MODULE) /* class, version - CHANGE class also in END MACRO! */ + /* request objects we use */ + CHKiRet(objUse(errmsg, CORE_COMPONENT)); + CHKiRet(objUse(netstrm, LM_NETSTRMS_FILENAME)); + CHKiRet(objUse(datetime, CORE_COMPONENT)); + + CHKiRet(objUse(glbl, CORE_COMPONENT)); + iMaxLine = glbl.GetMaxLine(); /* get maximum size we currently support */ + objRelease(glbl, CORE_COMPONENT); + + /* set our own handlers */ + OBJSetMethodHandler(objMethod_DEBUGPRINT, strms_sessDebugPrint); + OBJSetMethodHandler(objMethod_CONSTRUCTION_FINALIZER, strms_sessConstructFinalize); +ENDObjClassInit(strms_sess) + +/* vim:set ai: + */ diff --git a/runtime/strms_sess.h b/runtime/strms_sess.h new file mode 100644 index 00000000..6483c0c3 --- /dev/null +++ b/runtime/strms_sess.h @@ -0,0 +1,75 @@ +/* Definitions for strms_sess class. This implements a session of the + * generic stream server. + * + * Copyright 2008, 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of the rsyslog runtime library. + * + * The rsyslog runtime library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * The rsyslog runtime library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with the rsyslog runtime library. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + * A copy of the LGPL can be found in the file "COPYING.LESSER" in this distribution. + */ +#ifndef INCLUDED_STRMS_SESS_H +#define INCLUDED_STRMS_SESS_H + +#include "obj.h" + +/* a forward-definition, we are somewhat cyclic */ +struct strmsrv_s; + +/* the strms_sess object */ +struct strms_sess_s { + BEGINobjInstance; /* Data to implement generic object - MUST be the first data element! */ + strmsrv_t *pSrv; /* pointer back to my server (e.g. for callbacks) */ + strmLstnPortList_t *pLstnInfo; /* pointer back to listener info */ + netstrm_t *pStrm; +// uchar *pMsg; /* message (fragment) received */ + uchar *fromHost; + uchar *fromHostIP; + void *pUsr; /* a user-pointer */ +}; + + +/* interfaces */ +BEGINinterface(strms_sess) /* name must also be changed in ENDinterface macro! */ + INTERFACEObjDebugPrint(strms_sess); + rsRetVal (*Construct)(strms_sess_t **ppThis); + rsRetVal (*ConstructFinalize)(strms_sess_t __attribute__((unused)) *pThis); + rsRetVal (*Destruct)(strms_sess_t **ppThis); + rsRetVal (*Close)(strms_sess_t *pThis); + rsRetVal (*DataRcvd)(strms_sess_t *pThis, char *pData, size_t iLen); + /* set methods */ + rsRetVal (*SetStrmsrv)(strms_sess_t *pThis, struct strmsrv_s *pSrv); + rsRetVal (*SetLstnInfo)(strms_sess_t *pThis, strmLstnPortList_t *pLstnInfo); + rsRetVal (*SetUsrP)(strms_sess_t*, void*); + void* (*GetUsrP)(strms_sess_t*); + rsRetVal (*SetHost)(strms_sess_t *pThis, uchar*); + rsRetVal (*SetHostIP)(strms_sess_t *pThis, uchar*); + rsRetVal (*SetStrm)(strms_sess_t *pThis, netstrm_t*); + rsRetVal (*SetOnMsgReceive)(strms_sess_t *pThis, rsRetVal (*OnMsgReceive)(strms_sess_t*, uchar*, int)); +ENDinterface(strms_sess) +#define strms_sessCURR_IF_VERSION 1 /* increment whenever you change the interface structure! */ +/* interface changes + * to version v2, rgerhards, 2009-05-22 + * - Data structures changed + * - SetLstnInfo entry point added + */ + + +/* prototypes */ +PROTOTYPEObj(strms_sess); + + +#endif /* #ifndef INCLUDED_STRMS_SESS_H */ diff --git a/runtime/strmsrv.c b/runtime/strmsrv.c new file mode 100644 index 00000000..3dc53a97 --- /dev/null +++ b/runtime/strmsrv.c @@ -0,0 +1,966 @@ +/* strmsrv.c + * + * This builds a basic stream server. It handles connection creation but + * not any protocol. Instead, it calls a "data received" entry point of the + * caller with any data received, in which case the caller must react accordingly. + * This module works together with the netstream drivers. + * + * There are actually two classes within the stream server code: one is + * the strmsrv itself, the other one is its sessions. This is a helper + * class to strmsrv. + * + * File begun on 2009-06-01 by RGerhards based on strmsrv.c. Note that strmsrv is + * placed under LGPL, which is possible because I carefully evaluated and + * eliminated all those parts of strmsrv which were not written by me. + * + * TODO: I would consider it useful to migrate tcpsrv.c/tcps_sess.c to this stream + * class here. The requires a little bit redesign, but should not be too hard. The + * core idea, already begun here, is that we still support lots of callbacks, but + * provide "canned" implementations for standard cases. That way, most upper-layer + * modules can be kept rather simple and without any extra overhead. Note that + * to support this, tcps_sess.c would need to extract the message reception state + * machine to a separate module which then is called via the DoCharRcvd() interface + * of this class here. -- rgerhards, 2009-06-01 + * + * Copyright 2007, 2008, 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of the rsyslog runtime library. + * + * The rsyslog runtime library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * The rsyslog runtime library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with the rsyslog runtime library. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + * A copy of the LGPL can be found in the file "COPYING.LESSER" in this distribution. + */ + +#include "config.h" +#include <stdlib.h> +#include <assert.h> +#include <string.h> +#include <errno.h> +#include <unistd.h> +#include <stdarg.h> +#include <ctype.h> +#include <netinet/in.h> +#include <netdb.h> +#include <sys/types.h> +#include <sys/socket.h> +#if HAVE_FCNTL_H +#include <fcntl.h> +#endif +#include "rsyslog.h" +#include "dirty.h" +#include "cfsysline.h" +#include "module-template.h" +#include "net.h" +#include "srUtils.h" +#include "conf.h" +#include "strmsrv.h" +#include "obj.h" +#include "glbl.h" +#include "netstrms.h" +#include "netstrm.h" +#include "nssel.h" +#include "errmsg.h" +#include "unicode-helper.h" + +MODULE_TYPE_LIB + +/* defines */ +#define STRMSESS_MAX_DEFAULT 200 /* default for nbr of strm sessions if no number is given */ +#define STRMLSTN_MAX_DEFAULT 20 /* default for nbr of listeners */ + +/* static data */ +DEFobjStaticHelpers +DEFobjCurrIf(conf) +DEFobjCurrIf(glbl) +DEFobjCurrIf(strms_sess) +DEFobjCurrIf(errmsg) +DEFobjCurrIf(net) +DEFobjCurrIf(netstrms) +DEFobjCurrIf(netstrm) +DEFobjCurrIf(nssel) + +/* forward definitions */ +static rsRetVal create_strm_socket(strmsrv_t *pThis); + +/* standard callbacks, if the caller did not provide us with them (this helps keep us + * flexible while at the same time permits very simple upper-layer modules) + */ +/* this shall go into a specific ACL module! */ +static int +isPermittedHost(struct sockaddr __attribute__((unused)) *addr, char __attribute__((unused)) *fromHostFQDN, + void __attribute__((unused)) *pUsrSrv, void __attribute__((unused)) *pUsrSess) +{ + return 1; +} + + +static rsRetVal +doOpenLstnSocks(strmsrv_t *pSrv) +{ + ISOBJ_TYPE_assert(pSrv, strmsrv); + return create_strm_socket(pSrv); +} + + +static rsRetVal +doRcvData(strms_sess_t *pSess, char *buf, size_t lenBuf, ssize_t *piLenRcvd) +{ + DEFiRet; + assert(pSess != NULL); + assert(piLenRcvd != NULL); + + *piLenRcvd = lenBuf; + CHKiRet(netstrm.Rcv(pSess->pStrm, (uchar*) buf, piLenRcvd)); +finalize_it: + RETiRet; +} + +static rsRetVal +onRegularClose(strms_sess_t *pSess) +{ + DEFiRet; + assert(pSess != NULL); + + /* process any incomplete frames left over */ + //strms_sess.PrepareClose(pSess); + /* Session closed */ + strms_sess.Close(pSess); + RETiRet; +} + + +static rsRetVal +onErrClose(strms_sess_t *pSess) +{ + DEFiRet; + assert(pSess != NULL); + + strms_sess.Close(pSess); + RETiRet; +} + +/* ------------------------------ end callbacks ------------------------------ */ + +/* add new listener port to listener port list + * rgerhards, 2009-05-21 + */ +static inline rsRetVal +addNewLstnPort(strmsrv_t *pThis, uchar *pszPort) +{ + strmLstnPortList_t *pEntry; + DEFiRet; + + ISOBJ_TYPE_assert(pThis, strmsrv); + + /* create entry */ + CHKmalloc(pEntry = malloc(sizeof(strmLstnPortList_t))); + pEntry->pszPort = pszPort; + pEntry->pSrv = pThis; + CHKmalloc(pEntry->pszInputName = ustrdup(pThis->pszInputName)); + + /* and add to list */ + pEntry->pNext = pThis->pLstnPorts; + pThis->pLstnPorts = pEntry; + +finalize_it: + RETiRet; +} + + +/* configure STRM listener settings. + * Note: pszPort is handed over to us - the caller MUST NOT free it! + * rgerhards, 2008-03-20 + */ +static rsRetVal +configureSTRMListen(strmsrv_t *pThis, uchar *pszPort) +{ + int i; + uchar *pPort = pszPort; + DEFiRet; + + assert(pszPort != NULL); + ISOBJ_TYPE_assert(pThis, strmsrv); + + /* extract port */ + i = 0; + while(isdigit((int) *pPort)) { + i = i * 10 + *pPort++ - '0'; + } + + if(i >= 0 && i <= 65535) { + CHKiRet(addNewLstnPort(pThis, pszPort)); + } else { + errmsg.LogError(0, NO_ERRCODE, "Invalid STRM listen port %s - ignored.\n", pszPort); + } + +finalize_it: + RETiRet; +} + + +/* Initialize the session table + * returns 0 if OK, somewhat else otherwise + */ +static rsRetVal +STRMSessTblInit(strmsrv_t *pThis) +{ + DEFiRet; + + ISOBJ_TYPE_assert(pThis, strmsrv); + assert(pThis->pSessions == NULL); + + dbgprintf("Allocating buffer for %d STRM sessions.\n", pThis->iSessMax); + if((pThis->pSessions = (strms_sess_t **) calloc(pThis->iSessMax, sizeof(strms_sess_t *))) == NULL) { + dbgprintf("Error: STRMSessInit() could not alloc memory for STRM session table.\n"); + ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY); + } + +finalize_it: + RETiRet; +} + + +/* find a free spot in the session table. If the table + * is full, -1 is returned, else the index of the free + * entry (0 or higher). + */ +static int +STRMSessTblFindFreeSpot(strmsrv_t *pThis) +{ + register int i; + + ISOBJ_TYPE_assert(pThis, strmsrv); + + for(i = 0 ; i < pThis->iSessMax ; ++i) { + if(pThis->pSessions[i] == NULL) + break; + } + + return((i < pThis->iSessMax) ? i : -1); +} + + +/* Get the next session index. Free session tables entries are + * skipped. This function is provided the index of the last + * session entry, or -1 if no previous entry was obtained. It + * returns the index of the next session or -1, if there is no + * further entry in the table. Please note that the initial call + * might as well return -1, if there is no session at all in the + * session table. + */ +static int +STRMSessGetNxtSess(strmsrv_t *pThis, int iCurr) +{ + register int i; + + BEGINfunc + ISOBJ_TYPE_assert(pThis, strmsrv); + assert(pThis->pSessions != NULL); + for(i = iCurr + 1 ; i < pThis->iSessMax ; ++i) { + if(pThis->pSessions[i] != NULL) + break; + } + + ENDfunc + return((i < pThis->iSessMax) ? i : -1); +} + + +/* De-Initialize STRM listner sockets. + * This function deinitializes everything, including freeing the + * session table. No STRM listen receive operations are permitted + * unless the subsystem is reinitialized. + * rgerhards, 2007-06-21 + */ +static void deinit_strm_listener(strmsrv_t *pThis) +{ + int i; + strmLstnPortList_t *pEntry; + strmLstnPortList_t *pDel; + + ISOBJ_TYPE_assert(pThis, strmsrv); + + if(pThis->pSessions != NULL) { + /* close all STRM connections! */ + i = STRMSessGetNxtSess(pThis, -1); + while(i != -1) { + strms_sess.Destruct(&pThis->pSessions[i]); + /* now get next... */ + i = STRMSessGetNxtSess(pThis, i); + } + + /* we are done with the session table - so get rid of it... */ + free(pThis->pSessions); + pThis->pSessions = NULL; /* just to make sure... */ + } + + /* free list of strm listen ports */ + pEntry = pThis->pLstnPorts; + while(pEntry != NULL) { + free(pEntry->pszPort); + free(pEntry->pszInputName); + pDel = pEntry; + pEntry = pEntry->pNext; + free(pDel); + } + + /* finally close our listen streams */ + for(i = 0 ; i < pThis->iLstnMax ; ++i) { + netstrm.Destruct(pThis->ppLstn + i); + } +} + + +/* add a listen socket to our listen socket array. This is a callback + * invoked from the netstrm class. -- rgerhards, 2008-04-23 + */ +static rsRetVal +addStrmLstn(void *pUsr, netstrm_t *pLstn) +{ + strmLstnPortList_t *pPortList = (strmLstnPortList_t *) pUsr; + strmsrv_t *pThis = pPortList->pSrv; + DEFiRet; + + ISOBJ_TYPE_assert(pThis, strmsrv); + ISOBJ_TYPE_assert(pLstn, netstrm); + + if(pThis->iLstnMax >= STRMLSTN_MAX_DEFAULT) + ABORT_FINALIZE(RS_RET_MAX_LSTN_REACHED); + + pThis->ppLstn[pThis->iLstnMax] = pLstn; + pThis->ppLstnPort[pThis->iLstnMax] = pPortList; + ++pThis->iLstnMax; + +finalize_it: + RETiRet; +} + + +/* Initialize STRM listener socket for a single port + * rgerhards, 2009-05-21 + */ +static inline rsRetVal +initSTRMListener(strmsrv_t *pThis, strmLstnPortList_t *pPortEntry) +{ + DEFiRet; + + ISOBJ_TYPE_assert(pThis, strmsrv); + assert(pPortEntry != NULL); + + /* TODO: add capability to specify local listen address! */ + CHKiRet(netstrm.LstnInit(pThis->pNS, (void*)pPortEntry, addStrmLstn, pPortEntry->pszPort, NULL, pThis->iSessMax)); + +finalize_it: + RETiRet; +} + + +/* Initialize STRM sockets (for listener) and listens on them */ +static rsRetVal +create_strm_socket(strmsrv_t *pThis) +{ + strmLstnPortList_t *pEntry; + DEFiRet; + + ISOBJ_TYPE_assert(pThis, strmsrv); + + /* init all configured ports */ + pEntry = pThis->pLstnPorts; + while(pEntry != NULL) { + CHKiRet(initSTRMListener(pThis, pEntry)); + pEntry = pEntry->pNext; + } + + /* OK, we had success. Now it is also time to + * initialize our connections + */ + if(STRMSessTblInit(pThis) != 0) { + /* OK, we are in some trouble - we could not initialize the + * session table, so we can not continue. We need to free all + * we have assigned so far, because we can not really use it... + */ + errmsg.LogError(0, RS_RET_ERR, "Could not initialize STRM session table, suspending STRM message reception."); + ABORT_FINALIZE(RS_RET_ERR); + } + +finalize_it: + RETiRet; +} + + +/* Accept new STRM connection; make entry in session table. If there + * is no more space left in the connection table, the new STRM + * connection is immediately dropped. + * ppSess has a pointer to the newly created session, if it succeeds. + * If it does not succeed, no session is created and ppSess is + * undefined. If the user has provided an OnSessAccept Callback, + * this one is executed immediately after creation of the + * session object, so that it can do its own initialization. + * rgerhards, 2008-03-02 + */ +static rsRetVal +SessAccept(strmsrv_t *pThis, strmLstnPortList_t *pLstnInfo, strms_sess_t **ppSess, netstrm_t *pStrm) +{ + DEFiRet; + strms_sess_t *pSess = NULL; + netstrm_t *pNewStrm = NULL; + int iSess = -1; + struct sockaddr_storage *addr; + uchar *fromHostFQDN = NULL; + uchar *fromHostIP = NULL; + + ISOBJ_TYPE_assert(pThis, strmsrv); + assert(pLstnInfo != NULL); + + CHKiRet(netstrm.AcceptConnReq(pStrm, &pNewStrm)); + + /* Add to session list */ + iSess = STRMSessTblFindFreeSpot(pThis); + if(iSess == -1) { + errno = 0; + errmsg.LogError(0, RS_RET_MAX_SESS_REACHED, "too many strm sessions - dropping incoming request"); + ABORT_FINALIZE(RS_RET_MAX_SESS_REACHED); + } + + if(pThis->bUseKeepAlive) { + CHKiRet(netstrm.EnableKeepAlive(pNewStrm)); + } + + /* we found a free spot and can construct our session object */ + CHKiRet(strms_sess.Construct(&pSess)); + CHKiRet(strms_sess.SetStrmsrv(pSess, pThis)); + CHKiRet(strms_sess.SetLstnInfo(pSess, pLstnInfo)); + + /* get the host name */ + CHKiRet(netstrm.GetRemoteHName(pNewStrm, &fromHostFQDN)); + CHKiRet(netstrm.GetRemoteIP(pNewStrm, &fromHostIP)); + CHKiRet(netstrm.GetRemAddr(pNewStrm, &addr)); + /* TODO: check if we need to strip the domain name here -- rgerhards, 2008-04-24 */ + + /* Here we check if a host is permitted to send us messages. If it isn't, we do not further + * process the message but log a warning (if we are configured to do this). + * rgerhards, 2005-09-26 + */ + if(pThis->pIsPermittedHost != NULL + && !pThis->pIsPermittedHost((struct sockaddr*) addr, (char*) fromHostFQDN, pThis->pUsr, pSess->pUsr)) { + dbgprintf("%s is not an allowed sender\n", fromHostFQDN); + if(glbl.GetOption_DisallowWarning()) { + errno = 0; + errmsg.LogError(0, RS_RET_HOST_NOT_PERMITTED, "STRM message from disallowed sender %s discarded", fromHostFQDN); + } + ABORT_FINALIZE(RS_RET_HOST_NOT_PERMITTED); + } + + /* OK, we have an allowed sender, so let's continue, what + * means we can finally fill in the session object. + */ + CHKiRet(strms_sess.SetHost(pSess, fromHostFQDN)); + fromHostFQDN = NULL; /* we handed this string over */ + CHKiRet(strms_sess.SetHostIP(pSess, fromHostIP)); + fromHostIP = NULL; /* we handed this string over */ + CHKiRet(strms_sess.SetStrm(pSess, pNewStrm)); + pNewStrm = NULL; /* prevent it from being freed in error handler, now done in strms_sess! */ + CHKiRet(strms_sess.ConstructFinalize(pSess)); + + /* check if we need to call our callback */ + if(pThis->pOnSessAccept != NULL) { + CHKiRet(pThis->pOnSessAccept(pThis, pSess)); + } + + *ppSess = pSess; + pThis->pSessions[iSess] = pSess; + pSess = NULL; /* this is now also handed over */ + +finalize_it: + if(iRet != RS_RET_OK) { + if(pSess != NULL) + strms_sess.Destruct(&pSess); + if(pNewStrm != NULL) + netstrm.Destruct(&pNewStrm); + free(fromHostFQDN); + free(fromHostIP); + } + + RETiRet; +} + + +static void +RunCancelCleanup(void *arg) +{ + nssel_t **ppSel = (nssel_t**) arg; + + if(*ppSel != NULL) + nssel.Destruct(ppSel); +} + + +/* This function is called to gather input. */ +#pragma GCC diagnostic ignored "-Wempty-body" +static rsRetVal +Run(strmsrv_t *pThis) +{ + DEFiRet; + int nfds; + int i; + int iSTRMSess; + int bIsReady; + strms_sess_t *pNewSess; + nssel_t *pSel; + ssize_t iRcvd; + + ISOBJ_TYPE_assert(pThis, strmsrv); + + /* this is an endless loop - it is terminated by the framework canelling + * this thread. Thus, we also need to instantiate a cancel cleanup handler + * to prevent us from leaking anything. -- rgerharsd, 20080-04-24 + */ + pthread_cleanup_push(RunCancelCleanup, (void*) &pSel); + while(1) { + CHKiRet(nssel.Construct(&pSel)); + // TODO: set driver + CHKiRet(nssel.ConstructFinalize(pSel)); + + /* Add the STRM listen sockets to the list of read descriptors. */ + for(i = 0 ; i < pThis->iLstnMax ; ++i) { + CHKiRet(nssel.Add(pSel, pThis->ppLstn[i], NSDSEL_RD)); + } + + /* do the sessions */ + iSTRMSess = STRMSessGetNxtSess(pThis, -1); + while(iSTRMSess != -1) { + /* TODO: access to pNsd is NOT really CLEAN, use method... */ + CHKiRet(nssel.Add(pSel, pThis->pSessions[iSTRMSess]->pStrm, NSDSEL_RD)); + /* now get next... */ + iSTRMSess = STRMSessGetNxtSess(pThis, iSTRMSess); + } + + /* wait for io to become ready */ + CHKiRet(nssel.Wait(pSel, &nfds)); + + for(i = 0 ; i < pThis->iLstnMax ; ++i) { + CHKiRet(nssel.IsReady(pSel, pThis->ppLstn[i], NSDSEL_RD, &bIsReady, &nfds)); + if(bIsReady) { + dbgprintf("New connect on NSD %p.\n", pThis->ppLstn[i]); + SessAccept(pThis, pThis->ppLstnPort[i], &pNewSess, pThis->ppLstn[i]); + --nfds; /* indicate we have processed one */ + } + } + + /* now check the sessions */ + iSTRMSess = STRMSessGetNxtSess(pThis, -1); + while(nfds && iSTRMSess != -1) { + CHKiRet(nssel.IsReady(pSel, pThis->pSessions[iSTRMSess]->pStrm, NSDSEL_RD, &bIsReady, &nfds)); + if(bIsReady) { + char buf[8*1024]; /* reception buffer - may hold a partial or multiple messages */ + dbgprintf("netstream %p with new data\n", pThis->pSessions[iSTRMSess]->pStrm); + + /* Receive message */ + iRet = pThis->pRcvData(pThis->pSessions[iSTRMSess], buf, sizeof(buf), &iRcvd); + switch(iRet) { + case RS_RET_CLOSED: + pThis->pOnRegularClose(pThis->pSessions[iSTRMSess]); + strms_sess.Destruct(&pThis->pSessions[iSTRMSess]); + break; + case RS_RET_RETRY: + /* we simply ignore retry - this is not an error, but we also have not received anything */ + break; + case RS_RET_OK: + /* valid data received, process it! */ + if(strms_sess.DataRcvd(pThis->pSessions[iSTRMSess], buf, iRcvd) != RS_RET_OK) { + /* in this case, something went awfully wrong. + * We are instructed to terminate the session. + */ + errmsg.LogError(0, NO_ERRCODE, "Tearing down STRM Session %d - see " + "previous messages for reason(s)\n", iSTRMSess); + pThis->pOnErrClose(pThis->pSessions[iSTRMSess]); + strms_sess.Destruct(&pThis->pSessions[iSTRMSess]); + } + break; + default: + errno = 0; + errmsg.LogError(0, iRet, "netstream session %p will be closed due to error\n", + pThis->pSessions[iSTRMSess]->pStrm); + pThis->pOnErrClose(pThis->pSessions[iSTRMSess]); + strms_sess.Destruct(&pThis->pSessions[iSTRMSess]); + break; + } + --nfds; /* indicate we have processed one */ + } + iSTRMSess = STRMSessGetNxtSess(pThis, iSTRMSess); + } + CHKiRet(nssel.Destruct(&pSel)); +finalize_it: /* this is a very special case - this time only we do not exit the function, + * because that would not help us either. So we simply retry it. Let's see + * if that actually is a better idea. Exiting the loop wasn't we always + * crashed, which made sense (the rest of the engine was not prepared for + * that) -- rgerhards, 2008-05-19 + */ + /*EMPTY*/; + } + + /* note that this point is usually not reached */ + pthread_cleanup_pop(0); /* remove cleanup handler */ + + RETiRet; +} +#pragma GCC diagnostic warning "-Wempty-body" + + +/* Standard-Constructor */ +BEGINobjConstruct(strmsrv) /* be sure to specify the object type also in END macro! */ + pThis->iSessMax = STRMSESS_MAX_DEFAULT; /* TODO: useful default ;) */ + /* set default callbacks (used if caller does not overwrite them) */ + pThis->pIsPermittedHost = isPermittedHost; + pThis->OpenLstnSocks = doOpenLstnSocks; + pThis->pRcvData = doRcvData; + pThis->pOnRegularClose = onRegularClose; + pThis->pOnErrClose = onErrClose; + /* session specific callbacks */ + //pThis->OnSessConstructFinalize = + //pThis->pOnSessDestruct = +ENDobjConstruct(strmsrv) + + +/* ConstructionFinalizer */ +static rsRetVal +strmsrvConstructFinalize(strmsrv_t *pThis) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strmsrv); + + /* prepare network stream subsystem */ + CHKiRet(netstrms.Construct(&pThis->pNS)); + CHKiRet(netstrms.SetDrvrMode(pThis->pNS, pThis->iDrvrMode)); + if(pThis->pszDrvrAuthMode != NULL) + CHKiRet(netstrms.SetDrvrAuthMode(pThis->pNS, pThis->pszDrvrAuthMode)); + if(pThis->pPermPeers != NULL) + CHKiRet(netstrms.SetDrvrPermPeers(pThis->pNS, pThis->pPermPeers)); + // TODO: set driver! + CHKiRet(netstrms.ConstructFinalize(pThis->pNS)); + + /* set up listeners */ + CHKmalloc(pThis->ppLstn = calloc(STRMLSTN_MAX_DEFAULT, sizeof(netstrm_t*))); + CHKmalloc(pThis->ppLstnPort = calloc(STRMLSTN_MAX_DEFAULT, sizeof(strmLstnPortList_t*))); + iRet = pThis->OpenLstnSocks(pThis); + +finalize_it: + if(iRet != RS_RET_OK) { + if(pThis->pNS != NULL) + netstrms.Destruct(&pThis->pNS); + } + RETiRet; +} + + +/* destructor for the strmsrv object */ +BEGINobjDestruct(strmsrv) /* be sure to specify the object type also in END and CODESTART macros! */ +CODESTARTobjDestruct(strmsrv) + if(pThis->OnDestruct != NULL) + pThis->OnDestruct(pThis->pUsr); + + deinit_strm_listener(pThis); + + if(pThis->pNS != NULL) + netstrms.Destruct(&pThis->pNS); + free(pThis->pszDrvrAuthMode); + free(pThis->ppLstn); + free(pThis->ppLstnPort); + free(pThis->pszInputName); +ENDobjDestruct(strmsrv) + + +/* debugprint for the strmsrv object */ +BEGINobjDebugPrint(strmsrv) /* be sure to specify the object type also in END and CODESTART macros! */ +CODESTARTobjDebugPrint(strmsrv) +ENDobjDebugPrint(strmsrv) + +/* set functions */ +static rsRetVal +SetCBIsPermittedHost(strmsrv_t *pThis, int (*pCB)(struct sockaddr *addr, char *fromHostFQDN, void*, void*)) +{ + DEFiRet; + pThis->pIsPermittedHost = pCB; + RETiRet; +} + +static rsRetVal +SetCBOnSessAccept(strmsrv_t *pThis, rsRetVal (*pCB)(strmsrv_t*, strms_sess_t*)) +{ + DEFiRet; + pThis->pOnSessAccept = pCB; + RETiRet; +} + +static rsRetVal +SetCBOnDestruct(strmsrv_t *pThis, rsRetVal (*pCB)(void*)) +{ + DEFiRet; + pThis->OnDestruct = pCB; + RETiRet; +} + +static rsRetVal +SetCBOnSessConstructFinalize(strmsrv_t *pThis, rsRetVal (*pCB)(void*)) +{ + DEFiRet; + pThis->OnSessConstructFinalize = pCB; + RETiRet; +} + +static rsRetVal +SetCBOnSessDestruct(strmsrv_t *pThis, rsRetVal (*pCB)(void*)) +{ + DEFiRet; + pThis->pOnSessDestruct = pCB; + RETiRet; +} + +static rsRetVal +SetCBOnRegularClose(strmsrv_t *pThis, rsRetVal (*pCB)(strms_sess_t*)) +{ + DEFiRet; + pThis->pOnRegularClose = pCB; + RETiRet; +} + +static rsRetVal +SetCBOnErrClose(strmsrv_t *pThis, rsRetVal (*pCB)(strms_sess_t*)) +{ + DEFiRet; + pThis->pOnErrClose = pCB; + RETiRet; +} + +static rsRetVal +SetCBOpenLstnSocks(strmsrv_t *pThis, rsRetVal (*pCB)(strmsrv_t*)) +{ + DEFiRet; + pThis->OpenLstnSocks = pCB; + RETiRet; +} + +static rsRetVal +SetUsrP(strmsrv_t *pThis, void *pUsr) +{ + DEFiRet; + pThis->pUsr = pUsr; + RETiRet; +} + +static rsRetVal +SetKeepAlive(strmsrv_t *pThis, int iVal) +{ + DEFiRet; + dbgprintf("keep-alive set to %d\n", iVal); + pThis->bUseKeepAlive = iVal; + RETiRet; +} + +static rsRetVal +SetOnCharRcvd(strmsrv_t *pThis, rsRetVal (*OnCharRcvd)(strms_sess_t*, uchar)) +{ + DEFiRet; + assert(OnCharRcvd != NULL); + pThis->OnCharRcvd = OnCharRcvd; + RETiRet; +} + +/* Set the input name to use -- rgerhards, 2008-12-10 */ +static rsRetVal +SetInputName(strmsrv_t *pThis, uchar *name) +{ + uchar *pszName; + DEFiRet; + ISOBJ_TYPE_assert(pThis, strmsrv); + if(name == NULL) + pszName = NULL; + else + CHKmalloc(pszName = ustrdup(name)); + free(pThis->pszInputName); + pThis->pszInputName = pszName; +finalize_it: + RETiRet; +} + + +/* here follows a number of methods that shuffle authentication settings down + * to the drivers. Drivers not supporting these settings may return an error + * state. + * -------------------------------------------------------------------------- */ + +/* set the driver mode -- rgerhards, 2008-04-30 */ +static rsRetVal +SetDrvrMode(strmsrv_t *pThis, int iMode) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strmsrv); + pThis->iDrvrMode = iMode; + RETiRet; +} + + +/* set the driver authentication mode -- rgerhards, 2008-05-19 */ +static rsRetVal +SetDrvrAuthMode(strmsrv_t *pThis, uchar *mode) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strmsrv); + CHKmalloc(pThis->pszDrvrAuthMode = ustrdup(mode)); +finalize_it: + RETiRet; +} + + +/* set the driver's permitted peers -- rgerhards, 2008-05-19 */ +static rsRetVal +SetDrvrPermPeers(strmsrv_t *pThis, permittedPeers_t *pPermPeers) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strmsrv); + pThis->pPermPeers = pPermPeers; + RETiRet; +} + + +/* End of methods to shuffle autentication settings to the driver.; + + * -------------------------------------------------------------------------- */ + + +/* set max number of sessions + * this must be called before ConstructFinalize, or it will have no effect! + * rgerhards, 2009-04-09 + */ +static rsRetVal +SetSessMax(strmsrv_t *pThis, int iMax) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, strmsrv); + pThis->iSessMax = iMax; + RETiRet; +} + + +/* queryInterface function + * rgerhards, 2008-02-29 + */ +BEGINobjQueryInterface(strmsrv) +CODESTARTobjQueryInterface(strmsrv) + if(pIf->ifVersion != strmsrvCURR_IF_VERSION) { /* check for current version, increment on each change */ + ABORT_FINALIZE(RS_RET_INTERFACE_NOT_SUPPORTED); + } + + /* ok, we have the right interface, so let's fill it + * Please note that we may also do some backwards-compatibility + * work here (if we can support an older interface version - that, + * of course, also affects the "if" above). + */ + pIf->DebugPrint = strmsrvDebugPrint; + pIf->Construct = strmsrvConstruct; + pIf->ConstructFinalize = strmsrvConstructFinalize; + pIf->Destruct = strmsrvDestruct; + + pIf->configureSTRMListen = configureSTRMListen; + pIf->create_strm_socket = create_strm_socket; + pIf->Run = Run; + + pIf->SetKeepAlive = SetKeepAlive; + pIf->SetUsrP = SetUsrP; + pIf->SetInputName = SetInputName; + pIf->SetSessMax = SetSessMax; + pIf->SetDrvrMode = SetDrvrMode; + pIf->SetDrvrAuthMode = SetDrvrAuthMode; + pIf->SetDrvrPermPeers = SetDrvrPermPeers; + pIf->SetCBIsPermittedHost = SetCBIsPermittedHost; + pIf->SetCBOpenLstnSocks = SetCBOpenLstnSocks; + pIf->SetCBOnSessAccept = SetCBOnSessAccept; + pIf->SetCBOnSessConstructFinalize = SetCBOnSessConstructFinalize; + pIf->SetCBOnSessDestruct = SetCBOnSessDestruct; + pIf->SetCBOnDestruct = SetCBOnDestruct; + pIf->SetCBOnRegularClose = SetCBOnRegularClose; + pIf->SetCBOnErrClose = SetCBOnErrClose; + pIf->SetOnCharRcvd = SetOnCharRcvd; + +finalize_it: +ENDobjQueryInterface(strmsrv) + + +/* exit our class + * rgerhards, 2008-03-10 + */ +BEGINObjClassExit(strmsrv, OBJ_IS_LOADABLE_MODULE) /* CHANGE class also in END MACRO! */ +CODESTARTObjClassExit(strmsrv) + /* release objects we no longer need */ + objRelease(strms_sess, DONT_LOAD_LIB); + objRelease(conf, CORE_COMPONENT); + objRelease(glbl, CORE_COMPONENT); + objRelease(errmsg, CORE_COMPONENT); + objRelease(netstrms, DONT_LOAD_LIB); + objRelease(nssel, DONT_LOAD_LIB); + objRelease(netstrm, LM_NETSTRMS_FILENAME); + objRelease(net, LM_NET_FILENAME); +ENDObjClassExit(strmsrv) + + +/* Initialize our class. Must be called as the very first method + * before anything else is called inside this class. + * rgerhards, 2008-02-29 + */ +BEGINObjClassInit(strmsrv, 1, OBJ_IS_LOADABLE_MODULE) /* class, version - CHANGE class also in END MACRO! */ + /* request objects we use */ + CHKiRet(objUse(errmsg, CORE_COMPONENT)); + CHKiRet(objUse(net, LM_NET_FILENAME)); + CHKiRet(objUse(netstrms, LM_NETSTRMS_FILENAME)); + CHKiRet(objUse(netstrm, DONT_LOAD_LIB)); + CHKiRet(objUse(nssel, DONT_LOAD_LIB)); + CHKiRet(objUse(strms_sess, DONT_LOAD_LIB)); + CHKiRet(objUse(conf, CORE_COMPONENT)); + CHKiRet(objUse(glbl, CORE_COMPONENT)); + + /* set our own handlers */ + OBJSetMethodHandler(objMethod_DEBUGPRINT, strmsrvDebugPrint); + OBJSetMethodHandler(objMethod_CONSTRUCTION_FINALIZER, strmsrvConstructFinalize); +ENDObjClassInit(strmsrv) + + +/* --------------- here now comes the plumbing that makes as a library module --------------- */ + + +BEGINmodExit +CODESTARTmodExit + /* de-init in reverse order! */ + strmsrvClassExit(); + strms_sessClassExit(); +ENDmodExit + + +BEGINqueryEtryPt +CODESTARTqueryEtryPt +CODEqueryEtryPt_STD_LIB_QUERIES +ENDqueryEtryPt + + +BEGINmodInit() +CODESTARTmodInit + *ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */ + + /* Initialize all classes that are in our module - this includes ourselfs */ + CHKiRet(strms_sessClassInit(pModInfo)); + CHKiRet(strmsrvClassInit(pModInfo)); /* must be done after strms_sess, as we use it */ +ENDmodInit + +/* vim:set ai: + */ diff --git a/runtime/strmsrv.h b/runtime/strmsrv.h new file mode 100644 index 00000000..86e529c3 --- /dev/null +++ b/runtime/strmsrv.h @@ -0,0 +1,112 @@ +/* Definitions for strmsrv class. + * + * Copyright 2008, 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of the rsyslog runtime library. + * + * The rsyslog runtime library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * The rsyslog runtime library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with the rsyslog runtime library. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + * A copy of the LGPL can be found in the file "COPYING.LESSER" in this distribution. + */ +#ifndef INCLUDED_STRMSRV_H +#define INCLUDED_STRMSRV_H + +#include "obj.h" +#include "strms_sess.h" + +/* list of strm listen ports */ +struct strmLstnPortList_s { + uchar *pszPort; /**< the ports the listener shall listen on */ + uchar *pszInputName; /**< value to be used as input name */ + strmsrv_t *pSrv; /**< pointer to higher-level server instance */ + strmLstnPortList_t *pNext; /**< next port or NULL */ +}; + + +/* the strmsrv object */ +struct strmsrv_s { + BEGINobjInstance; /**< Data to implement generic object - MUST be the first data element! */ + int bUseKeepAlive; /**< use socket layer KEEPALIVE handling? */ + netstrms_t *pNS; /**< pointer to network stream subsystem */ + int iDrvrMode; /**< mode of the stream driver to use */ + uchar *pszDrvrAuthMode; /**< auth mode of the stream driver to use */ + uchar *pszInputName; /**< value to be used as input name */ + permittedPeers_t *pPermPeers;/**< driver's permitted peers */ + int iLstnMax; /**< max nbr of listeners currently supported */ + netstrm_t **ppLstn; /**< our netstream listners */ + strmLstnPortList_t **ppLstnPort; /**< pointer to relevant listen port description */ + int iSessMax; /**< max number of sessions supported */ + strmLstnPortList_t *pLstnPorts; /**< head pointer for listen ports */ + int addtlFrameDelim; /**< additional frame delimiter for plain STRM syslog framing (e.g. to handle NetScreen) */ + strms_sess_t **pSessions;/**< array of all of our sessions */ + void *pUsr; /**< a user-settable pointer (provides extensibility for "derived classes")*/ + /* callbacks */ + int (*pIsPermittedHost)(struct sockaddr *addr, char *fromHostFQDN, void*pUsrSrv, void*pUsrSess); + rsRetVal (*pRcvData)(strms_sess_t*, char*, size_t, ssize_t *); + rsRetVal (*OpenLstnSocks)(struct strmsrv_s*); + rsRetVal (*pOnListenDeinit)(void*); + rsRetVal (*OnDestruct)(void*); + rsRetVal (*pOnRegularClose)(strms_sess_t *pSess); + rsRetVal (*pOnErrClose)(strms_sess_t *pSess); + /* session specific callbacks */ + rsRetVal (*pOnSessAccept)(strmsrv_t *, strms_sess_t*); + rsRetVal (*OnSessConstructFinalize)(void*); + rsRetVal (*pOnSessDestruct)(void*); + rsRetVal (*OnCharRcvd)(strms_sess_t*, uchar); +}; + + +/* interfaces */ +BEGINinterface(strmsrv) /* name must also be changed in ENDinterface macro! */ + INTERFACEObjDebugPrint(strmsrv); + rsRetVal (*Construct)(strmsrv_t **ppThis); + rsRetVal (*ConstructFinalize)(strmsrv_t __attribute__((unused)) *pThis); + rsRetVal (*Destruct)(strmsrv_t **ppThis); + rsRetVal (*configureSTRMListen)(strmsrv_t*, uchar *pszPort); + //rsRetVal (*SessAccept)(strmsrv_t *pThis, strmLstnPortList_t*, strms_sess_t **ppSess, netstrm_t *pStrm); + rsRetVal (*create_strm_socket)(strmsrv_t *pThis); + rsRetVal (*Run)(strmsrv_t *pThis); + /* set methods */ + rsRetVal (*SetAddtlFrameDelim)(strmsrv_t*, int); + rsRetVal (*SetInputName)(strmsrv_t*, uchar*); + rsRetVal (*SetKeepAlive)(strmsrv_t*, int); + rsRetVal (*SetUsrP)(strmsrv_t*, void*); + rsRetVal (*SetCBIsPermittedHost)(strmsrv_t*, int (*) (struct sockaddr *addr, char*, void*, void*)); + rsRetVal (*SetCBOpenLstnSocks)(strmsrv_t *, rsRetVal (*)(strmsrv_t*)); + rsRetVal (*SetCBOnDestruct)(strmsrv_t*, rsRetVal (*) (void*)); + rsRetVal (*SetCBOnRegularClose)(strmsrv_t*, rsRetVal (*) (strms_sess_t*)); + rsRetVal (*SetCBOnErrClose)(strmsrv_t*, rsRetVal (*) (strms_sess_t*)); + rsRetVal (*SetDrvrMode)(strmsrv_t *pThis, int iMode); + rsRetVal (*SetDrvrAuthMode)(strmsrv_t *pThis, uchar *pszMode); + rsRetVal (*SetDrvrPermPeers)(strmsrv_t *pThis, permittedPeers_t*); + /* session specifics */ + rsRetVal (*SetCBOnSessAccept)(strmsrv_t*, rsRetVal (*) (strmsrv_t*, strms_sess_t*)); + rsRetVal (*SetCBOnSessDestruct)(strmsrv_t*, rsRetVal (*) (void*)); + rsRetVal (*SetCBOnSessConstructFinalize)(strmsrv_t*, rsRetVal (*) (void*)); + rsRetVal (*SetSessMax)(strmsrv_t *pThis, int iMaxSess); + rsRetVal (*SetOnCharRcvd)(strmsrv_t *pThis, rsRetVal (*OnMsgCharRcvd)(strms_sess_t*, uchar)); +ENDinterface(strmsrv) +#define strmsrvCURR_IF_VERSION 1 /* increment whenever you change the interface structure! */ +/* change for v?: + */ + + +/* prototypes */ +PROTOTYPEObj(strmsrv); + +/* the name of our library binary */ +#define LM_STRMSRV_FILENAME "lmstrmsrv" + +#endif /* #ifndef INCLUDED_STRMSRV_H */ diff --git a/runtime/sysvar.c b/runtime/sysvar.c index 5eec8f67..c102d1f5 100644 --- a/runtime/sysvar.c +++ b/runtime/sysvar.c @@ -84,7 +84,7 @@ getNOW(eNOWType eNow, cstr_t **ppStr) uchar szBuf[16]; struct syslogTime t; - datetime.getCurrTime(&t); + datetime.getCurrTime(&t, NULL); switch(eNow) { case NOW_NOW: snprintf((char*) szBuf, sizeof(szBuf)/sizeof(uchar), "%4.4d-%2.2d-%2.2d", t.year, t.month, t.day); diff --git a/runtime/unicode-helper.h b/runtime/unicode-helper.h new file mode 100644 index 00000000..36d76a78 --- /dev/null +++ b/runtime/unicode-helper.h @@ -0,0 +1,54 @@ +/* This is the header file for unicode support. + * + * Currently, this is a dummy module. + * The following functions are wrappers which hopefully enable us to move + * from 8-bit chars to unicode with relative ease when we finally attack this + * + * Begun 2009-05-21 RGerhards + * + * Copyright (C) 2009 by Rainer Gerhards and Adiscon GmbH + * + * This file is part of the rsyslog runtime library. + * + * The rsyslog runtime library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * The rsyslog runtime library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with the rsyslog runtime library. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + * A copy of the LGPL can be found in the file "COPYING.LESSER" in this distribution. + */ +#ifndef INCLUDED_UNICODE_HELPER_H +#define INCLUDED_UNICODE_HELPER_H + +#include <string.h> + +static inline int ustrcmp(uchar *psz1, uchar *psz2) +{ + return strcmp((char*) psz1, (char*) psz2); +} + +static inline int ustrlen(uchar *psz) +{ + return strlen((char*) psz); +} + +static inline uchar* ustrdup(uchar *psz) +{ + return (uchar*) strdup((char*)psz); +} + + +#define UCHAR_CONSTANT(x) ((uchar*) (x)) + +#endif /* multi-include protection */ +/* vim:set ai: + */ diff --git a/runtime/vm.c b/runtime/vm.c index f1fbcc2e..8cbf9e12 100644 --- a/runtime/vm.c +++ b/runtime/vm.c @@ -27,6 +27,7 @@ #include <stdlib.h> #include <string.h> #include <assert.h> +#include <ctype.h> #include "rsyslog.h" #include "obj.h" @@ -40,6 +41,142 @@ DEFobjCurrIf(vmstk) DEFobjCurrIf(var) DEFobjCurrIf(sysvar) +/* ------------------------------ function registry code and structures ------------------------------ */ + +/* we maintain a registry of known functions */ +/* currently, this is a singly-linked list, this shall become a binary + * tree when we add the real call interface. So far, entries are added + * at the root, only. + */ +typedef struct s_rsf_entry { + cstr_t *pName; /* function name */ + prsf_t rsf; /* pointer to function code */ + struct s_rsf_entry *pNext; /* Pointer to next element or NULL */ +} rsf_entry_t; +rsf_entry_t *funcRegRoot = NULL; + + +/* add a function to the function registry. + * The handed-over cstr_t* object must no longer be used by the caller. + * A duplicate function name is an error. + * rgerhards, 2009-04-06 + */ +static rsRetVal +rsfrAddFunction(uchar *szName, prsf_t rsf) +{ + rsf_entry_t *pEntry; + size_t lenName; + DEFiRet; + + assert(szName != NULL); + assert(rsf != NULL); + + /* first check if we have a duplicate name, with the current approach this means + * we need to go through the whole list. + */ + lenName = strlen((char*)szName); + for(pEntry = funcRegRoot ; pEntry != NULL ; pEntry = pEntry->pNext) + if(!rsCStrSzStrCmp(pEntry->pName, szName, lenName)) + ABORT_FINALIZE(RS_RET_DUP_FUNC_NAME); + + /* unique name, so add to head of list */ + CHKmalloc(pEntry = calloc(1, sizeof(rsf_entry_t))); + CHKiRet(rsCStrConstructFromszStr(&pEntry->pName, szName)); + pEntry->rsf = rsf; + pEntry->pNext = funcRegRoot; + funcRegRoot = pEntry; + +finalize_it: + RETiRet; +} + + +/* find a function inside the function registry + * The caller provides a cstr_t with the function name and receives + * a function pointer back. If no function is found, an RS_RET_UNKNW_FUNC + * error is returned. So if the function returns with RS_RET_OK, the caller + * can savely assume the function pointer is valid. + * rgerhards, 2009-04-06 + */ +static rsRetVal +findRSFunction(cstr_t *pcsName, prsf_t *prsf) +{ + rsf_entry_t *pEntry; + rsf_entry_t *pFound; + DEFiRet; + + assert(prsf != NULL); + + /* find function by list walkthrough. */ + pFound = NULL; + for(pEntry = funcRegRoot ; pEntry != NULL && pFound == NULL ; pEntry = pEntry->pNext) + if(!rsCStrCStrCmp(pEntry->pName, pcsName)) + pFound = pEntry; + + if(pFound == NULL) + ABORT_FINALIZE(RS_RET_UNKNW_FUNC); + + *prsf = pFound->rsf; + +finalize_it: + RETiRet; +} + + +/* find the name of a RainerScript function whom's function pointer + * is known. This function returns the cstr_t object, which MUST NOT + * be modified by the caller. + * rgerhards, 2009-04-06 + */ +static rsRetVal +findRSFunctionName(prsf_t rsf, cstr_t **ppcsName) +{ + rsf_entry_t *pEntry; + rsf_entry_t *pFound; + DEFiRet; + + assert(rsf != NULL); + assert(ppcsName != NULL); + + /* find function by list walkthrough. */ + pFound = NULL; + for(pEntry = funcRegRoot ; pEntry != NULL && pFound == NULL ; pEntry = pEntry->pNext) + if(pEntry->rsf == rsf) + pFound = pEntry; + + if(pFound == NULL) + ABORT_FINALIZE(RS_RET_UNKNW_FUNC); + + *ppcsName = pFound->pName; + +finalize_it: + RETiRet; +} + + +/* free the whole function registry + */ +static void +rsfrRemoveAll(void) +{ + rsf_entry_t *pEntry; + rsf_entry_t *pEntryDel; + + BEGINfunc + pEntry = funcRegRoot; + while(pEntry != NULL) { + pEntryDel = pEntry; + pEntry = pEntry->pNext; + rsCStrDestruct(&pEntryDel->pName); + free(pEntryDel); + } + funcRegRoot = NULL; + ENDfunc +} + + +/* ------------------------------ end function registry code and structures ------------------------------ */ + /* ------------------------------ instruction set implementation ------------------------------ * * The following functions implement the VM's instruction set. @@ -331,10 +468,109 @@ CODESTARTop(PUSHSYSVAR) finalize_it: ENDop(PUSHSYSVAR) +/* The function call operation is only very roughly implemented. While the plumbing + * to reach this instruction is fine, the instruction itself currently supports only + * functions with a single argument AND with a name that we know. + * TODO: later, we can add here the real logic, that involves looking up function + * names, loading them dynamically ... and all that... + * implementation begun 2009-03-10 by rgerhards + */ +BEGINop(FUNC_CALL) /* remember to set the instruction also in the ENDop macro! */ + var_t *numOperands; +CODESTARTop(FUNC_CALL) + vmstk.PopNumber(pThis->pStk, &numOperands); + CHKiRet((*pOp->operand.rsf)(pThis->pStk, numOperands->val.num)); + var.Destruct(&numOperands); /* no longer needed */ +finalize_it: +ENDop(FUNC_CALL) + /* ------------------------------ end instruction set implementation ------------------------------ */ +/* ------------------------------ begin built-in function implementation ------------------------------ */ +/* note: this shall probably be moved to a separate module, but for the time being we do it directly + * in here. This is on our way to get from a dirty to a clean solution via baby steps that are + * a bit less dirty each time... + * + * The advantage of doing it here is that we do not yet need to think about how to handle the + * exit case, where we must not unload function modules which functions are still referenced. + * + * CALLING INTERFACE: + * The function must pop its parameters off the stack and pop its result onto + * the stack when it is finished. The number of parameters the function was + * called with is provided to it. If the argument count is less then what the function + * expected, it may handle the situation with defaults (or return an error). If the + * argument count is greater than expected, returnung an error is highly + * recommended (use RS_RET_INVLD_NBR_ARGUMENTS for these cases). + * + * All function names are prefixed with "rsf_" (RainerScript Function) to have + * a separate "name space". + * + * rgerhards, 2009-04-06 + */ + + +/* The strlen function, also probably a prototype of how all functions should be + * implemented. + * rgerhards, 2009-04-06 + */ +static rsRetVal +rsf_strlen(vmstk_t *pStk, int numOperands) +{ + DEFiRet; + var_t *operand1; + int iStrlen; + + if(numOperands != 1) + ABORT_FINALIZE(RS_RET_INVLD_NBR_ARGUMENTS); + + /* pop args and do operaton (trivial case here...) */ + vmstk.PopString(pStk, &operand1); + iStrlen = strlen((char*) rsCStrGetSzStr(operand1->val.pStr)); + + /* Store result and cleanup */ + var.SetNumber(operand1, iStrlen); + vmstk.Push(pStk, operand1); +finalize_it: + RETiRet; +} + + +/* The "tolower" function, which converts its sole argument to lower case. + * Quite honestly, currently this is primarily a test driver for me... + * rgerhards, 2009-04-06 + */ +static rsRetVal +rsf_tolower(vmstk_t *pStk, int numOperands) +{ + DEFiRet; + var_t *operand1; + uchar *pSrc; + cstr_t *pcstr; + int iStrlen; + + if(numOperands != 1) + ABORT_FINALIZE(RS_RET_INVLD_NBR_ARGUMENTS); + + /* pop args and do operaton */ + CHKiRet(rsCStrConstruct(&pcstr)); + vmstk.PopString(pStk, &operand1); + pSrc = rsCStrGetSzStr(operand1->val.pStr); + iStrlen = strlen((char*)pSrc); + while(iStrlen--) { + CHKiRet(rsCStrAppendChar(pcstr, tolower(*pSrc++))); + } + + /* Store result and cleanup */ + CHKiRet(cstrFinalize(pcstr)); + var.SetString(operand1, pcstr); + vmstk.Push(pStk, operand1); +finalize_it: + RETiRet; +} + + /* Standard-Constructor */ BEGINobjConstruct(vm) /* be sure to specify the object type also in END macro! */ @@ -413,6 +649,7 @@ execProg(vm_t *pThis, vmprg_t *pProg) doOP(DIV); doOP(MOD); doOP(UNARY_MINUS); + doOP(FUNC_CALL); default: ABORT_FINALIZE(RS_RET_INVALID_VMOP); dbgoprint((obj_t*) pThis, "invalid instruction %d in vmprg\n", pCurrOp->opcode); @@ -503,10 +740,23 @@ CODESTARTobjQueryInterface(vm) pIf->PopBoolFromStack = PopBoolFromStack; pIf->PopVarFromStack = PopVarFromStack; pIf->SetMsg = SetMsg; + pIf->FindRSFunction = findRSFunction; + pIf->FindRSFunctionName = findRSFunctionName; finalize_it: ENDobjQueryInterface(vm) +/* Exit the vm class. + * rgerhards, 2009-04-06 + */ +BEGINObjClassExit(vm, OBJ_IS_CORE_MODULE) /* class, version */ + rsfrRemoveAll(); + objRelease(sysvar, CORE_COMPONENT); + objRelease(var, CORE_COMPONENT); + objRelease(vmstk, CORE_COMPONENT); +ENDObjClassExit(vm) + + /* Initialize the vm class. Must be called as the very first method * before anything else is called inside this class. * rgerhards, 2008-02-19 @@ -520,6 +770,11 @@ BEGINObjClassInit(vm, 1, OBJ_IS_CORE_MODULE) /* class, version */ /* set our own handlers */ OBJSetMethodHandler(objMethod_DEBUGPRINT, vmDebugPrint); OBJSetMethodHandler(objMethod_CONSTRUCTION_FINALIZER, vmConstructFinalize); + + /* register built-in functions // TODO: move to its own module */ + CHKiRet(rsfrAddFunction((uchar*)"strlen", rsf_strlen)); + CHKiRet(rsfrAddFunction((uchar*)"tolower", rsf_tolower)); + ENDObjClassInit(vm) /* vi:set ai: diff --git a/runtime/vm.h b/runtime/vm.h index d2458220..cb3c69d0 100644 --- a/runtime/vm.h +++ b/runtime/vm.h @@ -55,8 +55,11 @@ BEGINinterface(vm) /* name must also be changed in ENDinterface macro! */ rsRetVal (*PopBoolFromStack)(vm_t *pThis, var_t **ppVar); /* there are a few cases where we need this... */ rsRetVal (*PopVarFromStack)(vm_t *pThis, var_t **ppVar); /* there are a few cases where we need this... */ rsRetVal (*SetMsg)(vm_t *pThis, msg_t *pMsg); /* there are a few cases where we need this... */ + /* v2 (4.1.7) */ + rsRetVal (*FindRSFunction)(cstr_t *pcsName, prsf_t *prsf); /* 2009-06-04 */ + rsRetVal (*FindRSFunctionName)(prsf_t rsf, cstr_t **ppcsName); /* 2009-06-04 */ ENDinterface(vm) -#define vmCURR_IF_VERSION 1 /* increment whenever you change the interface structure! */ +#define vmCURR_IF_VERSION 2 /* increment whenever you change the interface structure! */ /* prototypes */ diff --git a/runtime/vmop.c b/runtime/vmop.c index fcacb15b..acacfc9e 100644 --- a/runtime/vmop.c +++ b/runtime/vmop.c @@ -32,10 +32,12 @@ #include "rsyslog.h" #include "obj.h" #include "vmop.h" +#include "vm.h" /* static data */ DEFobjStaticHelpers DEFobjCurrIf(var) +DEFobjCurrIf(vm) /* forward definitions */ @@ -61,9 +63,7 @@ rsRetVal vmopConstructFinalize(vmop_t __attribute__((unused)) *pThis) /* destructor for the vmop object */ BEGINobjDestruct(vmop) /* be sure to specify the object type also in END and CODESTART macros! */ CODESTARTobjDestruct(vmop) - if( pThis->opcode == opcode_PUSHSYSVAR - || pThis->opcode == opcode_PUSHMSGVAR - || pThis->opcode == opcode_PUSHCONSTANT) { + if(pThis->opcode != opcode_FUNC_CALL) { if(pThis->operand.pVar != NULL) var.Destruct(&pThis->operand.pVar); } @@ -73,12 +73,23 @@ ENDobjDestruct(vmop) /* DebugPrint support for the vmop object */ BEGINobjDebugPrint(vmop) /* be sure to specify the object type also in END and CODESTART macros! */ uchar *pOpcodeName; + cstr_t *pStrVar; CODESTARTobjDebugPrint(vmop) vmopOpcode2Str(pThis, &pOpcodeName); - dbgoprint((obj_t*) pThis, "opcode: %d\t(%s), next %p, var in next line\n", (int) pThis->opcode, pOpcodeName, - pThis->pNext); - if(pThis->operand.pVar != NULL) - var.DebugPrint(pThis->operand.pVar); + if(pThis->opcode == opcode_FUNC_CALL) { + CHKiRet(vm.FindRSFunctionName(pThis->operand.rsf, &pStrVar)); + assert(pStrVar != NULL); + } else { + CHKiRet(rsCStrConstruct(&pStrVar)); + if(pThis->operand.pVar != NULL) { + CHKiRet(var.Obj2Str(pThis->operand.pVar, pStrVar)); + } + } + CHKiRet(cstrFinalize(pStrVar)); + dbgoprint((obj_t*) pThis, "%.12s\t%s\n", pOpcodeName, rsCStrGetSzStrNoNULL(pStrVar)); + if(pThis->opcode != opcode_FUNC_CALL) + rsCStrDestruct(&pStrVar); +finalize_it: ENDobjDebugPrint(vmop) @@ -97,6 +108,7 @@ static rsRetVal Obj2Str(vmop_t *pThis, cstr_t *pstrPrg) { uchar *pOpcodeName; + cstr_t *pcsFuncName; uchar szBuf[2048]; size_t lenBuf; DEFiRet; @@ -106,8 +118,13 @@ Obj2Str(vmop_t *pThis, cstr_t *pstrPrg) vmopOpcode2Str(pThis, &pOpcodeName); lenBuf = snprintf((char*) szBuf, sizeof(szBuf), "%s\t", pOpcodeName); CHKiRet(rsCStrAppendStrWithLen(pstrPrg, szBuf, lenBuf)); - if(pThis->operand.pVar != NULL) - CHKiRet(var.Obj2Str(pThis->operand.pVar, pstrPrg)); + if(pThis->opcode == opcode_FUNC_CALL) { + CHKiRet(vm.FindRSFunctionName(pThis->operand.rsf, &pcsFuncName)); + CHKiRet(rsCStrAppendCStr(pstrPrg, pcsFuncName)); + } else { + if(pThis->operand.pVar != NULL) + CHKiRet(var.Obj2Str(pThis->operand.pVar, pstrPrg)); + } CHKiRet(rsCStrAppendChar(pstrPrg, '\n')); finalize_it: @@ -115,6 +132,23 @@ finalize_it: } +/* set function + * rgerhards, 2009-04-06 + */ +static rsRetVal +vmopSetFunc(vmop_t *pThis, cstr_t *pcsFuncName) +{ + prsf_t rsf; /* pointer to function */ + DEFiRet; + ISOBJ_TYPE_assert(pThis, vmop); + CHKiRet(vm.FindRSFunction(pcsFuncName, &rsf)); /* check if function exists and obtain pointer to it */ + assert(rsf != NULL); /* just double-check, would be very hard to find! */ + pThis->operand.rsf = rsf; +finalize_it: + RETiRet; +} + + /* set operand (variant case) * rgerhards, 2008-02-20 */ @@ -158,37 +192,37 @@ vmopOpcode2Str(vmop_t *pThis, uchar **ppName) *ppName = (uchar*) "and"; break; case opcode_PLUS: - *ppName = (uchar*) "+"; + *ppName = (uchar*) "add"; break; case opcode_MINUS: - *ppName = (uchar*) "-"; + *ppName = (uchar*) "sub"; break; case opcode_TIMES: - *ppName = (uchar*) "*"; + *ppName = (uchar*) "mul"; break; case opcode_DIV: - *ppName = (uchar*) "/"; + *ppName = (uchar*) "div"; break; case opcode_MOD: - *ppName = (uchar*) "%"; + *ppName = (uchar*) "mod"; break; case opcode_NOT: *ppName = (uchar*) "not"; break; case opcode_CMP_EQ: - *ppName = (uchar*) "=="; + *ppName = (uchar*) "cmp_=="; break; case opcode_CMP_NEQ: - *ppName = (uchar*) "!="; + *ppName = (uchar*) "cmp_!="; break; case opcode_CMP_LT: - *ppName = (uchar*) "<"; + *ppName = (uchar*) "cmp_<"; break; case opcode_CMP_GT: - *ppName = (uchar*) ">"; + *ppName = (uchar*) "cmp_>"; break; case opcode_CMP_LTEQ: - *ppName = (uchar*) "<="; + *ppName = (uchar*) "cmp_<="; break; case opcode_CMP_CONTAINS: *ppName = (uchar*) "contains"; @@ -197,28 +231,31 @@ vmopOpcode2Str(vmop_t *pThis, uchar **ppName) *ppName = (uchar*) "startswith"; break; case opcode_CMP_GTEQ: - *ppName = (uchar*) ">="; + *ppName = (uchar*) "cmp_>="; break; case opcode_PUSHSYSVAR: - *ppName = (uchar*) "PUSHSYSVAR"; + *ppName = (uchar*) "push_sysvar"; break; case opcode_PUSHMSGVAR: - *ppName = (uchar*) "PUSHMSGVAR"; + *ppName = (uchar*) "push_msgvar"; break; case opcode_PUSHCONSTANT: - *ppName = (uchar*) "PUSHCONSTANT"; + *ppName = (uchar*) "push_const"; break; case opcode_POP: - *ppName = (uchar*) "POP"; + *ppName = (uchar*) "pop"; break; case opcode_UNARY_MINUS: - *ppName = (uchar*) "UNARY_MINUS"; + *ppName = (uchar*) "unary_minus"; break; case opcode_STRADD: - *ppName = (uchar*) "STRADD"; + *ppName = (uchar*) "strconcat"; + break; + case opcode_FUNC_CALL: + *ppName = (uchar*) "func_call"; break; default: - *ppName = (uchar*) "INVALID opcode"; + *ppName = (uchar*) "!invalid_opcode!"; break; } @@ -244,6 +281,7 @@ CODESTARTobjQueryInterface(vmop) pIf->ConstructFinalize = vmopConstructFinalize; pIf->Destruct = vmopDestruct; pIf->DebugPrint = vmopDebugPrint; + pIf->SetFunc = vmopSetFunc; pIf->SetOpcode = vmopSetOpcode; pIf->SetVar = vmopSetVar; pIf->Opcode2Str = vmopOpcode2Str; @@ -259,6 +297,7 @@ ENDobjQueryInterface(vmop) BEGINObjClassInit(vmop, 1, OBJ_IS_CORE_MODULE) /* class, version */ /* request objects we use */ CHKiRet(objUse(var, CORE_COMPONENT)); + CHKiRet(objUse(vm, CORE_COMPONENT)); OBJSetMethodHandler(objMethod_DEBUGPRINT, vmopDebugPrint); OBJSetMethodHandler(objMethod_CONSTRUCTION_FINALIZER, vmopConstructFinalize); diff --git a/runtime/vmop.h b/runtime/vmop.h index c3d5d5f4..67048c26 100644 --- a/runtime/vmop.h +++ b/runtime/vmop.h @@ -26,6 +26,7 @@ #define INCLUDED_VMOP_H #include "ctok_token.h" +#include "vmstk.h" #include "stringbuf.h" /* machine instructions types */ @@ -59,17 +60,45 @@ typedef enum { /* do NOT start at 0 to detect uninitialized types after calloc( opcode_PUSHMSGVAR = 1002, /* requires var operand */ opcode_PUSHCONSTANT = 1003, /* requires var operand */ opcode_UNARY_MINUS = 1010, - opcode_END_PROG = 1011 + opcode_FUNC_CALL = 1012, + opcode_END_PROG = 2000 } opcode_t; +/* Additional doc, operation specific + + FUNC_CALL + All parameter passing is via the stack. Parameters are placed onto the stack in reverse order, + that means the last parameter is on top of the stack, the first at the bottom location. + At the actual top of the stack is the number of parameters. This permits functions to be + called with variable number of arguments. The function itself is responsible for poping + the right number of parameters of the stack and complaining if the number is incorrect. + On exit, a single return value must be pushed onto the stack. The FUNC_CALL operation + is generic. Its pVar argument contains the function name string (TODO: very slow, make + faster in later releases). + + Sample Function call: sampleFunc(p1, p2, p3) ; returns number 4711 (sample) + Stacklayout on entry (order is top to bottom): + 3 + p3 + p2 + p1 + ... other vars ... + + Stack on exit + 4711 + ... other vars ... + + */ + + /* the vmop object */ typedef struct vmop_s { BEGINobjInstance; /* Data to implement generic object - MUST be the first data element! */ opcode_t opcode; union { var_t *pVar; - /* TODO: add function pointer */ + prsf_t rsf; /* pointer to function for "call" instruction */ } operand; struct vmop_s *pNext; /* next operation or NULL, if end of program (logically this belongs to vmprg) */ } vmop_t; @@ -85,8 +114,13 @@ BEGINinterface(vmop) /* name must also be changed in ENDinterface macro! */ rsRetVal (*SetVar)(vmop_t *pThis, var_t *pVar); rsRetVal (*Opcode2Str)(vmop_t *pThis, uchar **ppName); rsRetVal (*Obj2Str)(vmop_t *pThis, cstr_t *pstr); + /* v2 */ + rsRetVal (*SetFunc)(vmop_t *pThis, cstr_t *pcsFuncName); ENDinterface(vmop) -#define vmopCURR_IF_VERSION 1 /* increment whenever you change the interface structure! */ +#define vmopCURR_IF_VERSION 2 /* increment whenever you change the interface structure! */ +/* interface changes, v1 -> v2 + * added SetFuct after existing function pointers -- rgerhards, 2009-04-06 + */ /* the remaining prototypes */ PROTOTYPEObj(vmop); diff --git a/runtime/vmprg.c b/runtime/vmprg.c index 705e6948..07757b98 100644 --- a/runtime/vmprg.c +++ b/runtime/vmprg.c @@ -74,7 +74,7 @@ ENDobjDestruct(vmprg) BEGINobjDebugPrint(vmprg) /* be sure to specify the object type also in END and CODESTART macros! */ vmop_t *pOp; CODESTARTobjDebugPrint(vmprg) - dbgoprint((obj_t*) pThis, "program contents:\n"); + dbgoprint((obj_t*) pThis, "VM Program:\n"); for(pOp = pThis->vmopRoot ; pOp != NULL ; pOp = pOp->pNext) { vmop.DebugPrint(pOp); } @@ -155,7 +155,6 @@ vmprgAddVarOperation(vmprg_t *pThis, opcode_t opcode, var_t *pVar) /* construct and fill vmop */ CHKiRet(vmop.Construct(&pOp)); CHKiRet(vmop.ConstructFinalize(pOp)); - CHKiRet(vmop.ConstructFinalize(pOp)); CHKiRet(vmop.SetOpcode(pOp, opcode)); if(pVar != NULL) CHKiRet(vmop.SetVar(pOp, pVar)); @@ -168,6 +167,32 @@ finalize_it: } +/* this is another shortcut for high-level callers. It is similar to vmprgAddVarOperation + * but adds a call operation. Among others, this include a check if the function + * is known. + */ +static rsRetVal +vmprgAddCallOperation(vmprg_t *pThis, cstr_t *pcsName) +{ + DEFiRet; + vmop_t *pOp; + + ISOBJ_TYPE_assert(pThis, vmprg); + + /* construct and fill vmop */ + CHKiRet(vmop.Construct(&pOp)); + CHKiRet(vmop.ConstructFinalize(pOp)); + CHKiRet(vmop.SetFunc(pOp, pcsName)); + CHKiRet(vmop.SetOpcode(pOp, opcode_FUNC_CALL)); + + /* and add it to the program */ + CHKiRet(vmprgAddOperation(pThis, pOp)); + +finalize_it: + RETiRet; +} + + /* queryInterface function * rgerhards, 2008-02-21 */ @@ -189,6 +214,7 @@ CODESTARTobjQueryInterface(vmprg) pIf->Obj2Str = Obj2Str; pIf->AddOperation = vmprgAddOperation; pIf->AddVarOperation = vmprgAddVarOperation; + pIf->AddCallOperation = vmprgAddCallOperation; finalize_it: ENDobjQueryInterface(vmprg) diff --git a/runtime/vmprg.h b/runtime/vmprg.h index c1042f7d..66f03913 100644 --- a/runtime/vmprg.h +++ b/runtime/vmprg.h @@ -57,8 +57,10 @@ BEGINinterface(vmprg) /* name must also be changed in ENDinterface macro! */ rsRetVal (*AddOperation)(vmprg_t *pThis, vmop_t *pOp); rsRetVal (*AddVarOperation)(vmprg_t *pThis, opcode_t opcode, var_t *pVar); rsRetVal (*Obj2Str)(vmprg_t *pThis, cstr_t *pstr); + /* v2 (4.1.7) */ + rsRetVal (*AddCallOperation)(vmprg_t *pThis, cstr_t *pVar); /* added 2009-04-06 */ ENDinterface(vmprg) -#define vmprgCURR_IF_VERSION 1 /* increment whenever you change the interface structure! */ +#define vmprgCURR_IF_VERSION 2 /* increment whenever you change the interface structure! */ /* prototypes */ diff --git a/runtime/vmstk.h b/runtime/vmstk.h index 2d45ee4d..06657cf4 100644 --- a/runtime/vmstk.h +++ b/runtime/vmstk.h @@ -27,11 +27,11 @@ #define VMSTK_SIZE 256 /* the vmstk object */ -typedef struct vmstk_s { +struct vmstk_s { BEGINobjInstance; /* Data to implement generic object - MUST be the first data element! */ var_t *vStk[VMSTK_SIZE];/* the actual stack */ int iStkPtr; /* stack pointer, points to next free location, grows from 0 --> topend */ -} vmstk_t; +}; /* interfaces */ diff --git a/runtime/wti.c b/runtime/wti.c index 343a7227..544bffa7 100644 --- a/runtime/wti.c +++ b/runtime/wti.c @@ -39,15 +39,22 @@ #include <pthread.h> #include <errno.h> +#ifdef OS_SOLARIS +# include <sched.h> +# define pthread_yield() sched_yield() +#endif + #include "rsyslog.h" #include "stringbuf.h" #include "srUtils.h" #include "wtp.h" #include "wti.h" #include "obj.h" +#include "glbl.h" /* static data */ DEFobjStaticHelpers +DEFobjCurrIf(glbl) /* forward-definitions */ @@ -202,6 +209,7 @@ ENDobjDestruct(wti) /* Standard-Constructor for the wti object */ BEGINobjConstruct(wti) /* be sure to specify the object type also in END macro! */ + pThis->bOptimizeUniProc = glbl.GetOptimizeUniProc(); pthread_cond_init(&pThis->condExitDone, NULL); pthread_mutex_init(&pThis->mut, NULL); ENDobjConstruct(wti) @@ -303,7 +311,7 @@ wtiWorkerCancelCleanup(void *arg) pWtp = pThis->pWtp; ISOBJ_TYPE_assert(pWtp, wtp); - dbgprintf("%s: cancelation cleanup handler called.\n", wtiGetDbgHdr(pThis)); + DBGPRINTF("%s: cancelation cleanup handler called.\n", wtiGetDbgHdr(pThis)); /* call user supplied handler (that one e.g. requeues the element) */ pWtp->pfOnWorkerCancel(pThis->pWtp->pUsr, pThis->pUsrp); @@ -371,7 +379,8 @@ wtiWorker(wti_t *pThis) wtpProcessThrdChanges(pWtp); pthread_testcancel(); /* see big comment in function header */ # if !defined(__hpux) /* pthread_yield is missing there! */ - pthread_yield(); /* see big comment in function header */ + if(pThis->bOptimizeUniProc) + pthread_yield(); /* see big comment in function header */ # endif /* if we have a rate-limiter set for this worker pool, let's call it. Please @@ -395,7 +404,7 @@ wtiWorker(wti_t *pThis) /* if we reach this point, we are still protected by the mutex */ if(pWtp->pfIsIdle(pWtp->pUsr, MUTEX_ALREADY_LOCKED)) { - dbgprintf("%s: worker IDLE, waiting for work.\n", wtiGetDbgHdr(pThis)); + DBGPRINTF("%s: worker IDLE, waiting for work.\n", wtiGetDbgHdr(pThis)); pWtp->pfOnIdle(pWtp->pUsr, MUTEX_ALREADY_LOCKED); if(pWtp->toWrkShutdown == -1) { @@ -404,7 +413,7 @@ wtiWorker(wti_t *pThis) } else { timeoutComp(&t, pWtp->toWrkShutdown);/* get absolute timeout */ if(d_pthread_cond_timedwait(pWtp->pcondBusy, pWtp->pmutUsr, &t) != 0) { - dbgprintf("%s: inactivity timeout, worker terminating...\n", wtiGetDbgHdr(pThis)); + DBGPRINTF("%s: inactivity timeout, worker terminating...\n", wtiGetDbgHdr(pThis)); bInactivityTOOccured = 1; /* indicate we had a timeout */ } } @@ -470,6 +479,14 @@ finalize_it: /* dummy */ rsRetVal wtiQueryInterface(void) { return RS_RET_NOT_IMPLEMENTED; } +/* exit our class + */ +BEGINObjClassExit(wti, OBJ_IS_CORE_MODULE) /* CHANGE class also in END MACRO! */ +CODESTARTObjClassExit(nsdsel_gtls) + /* release objects we no longer need */ + objRelease(glbl, CORE_COMPONENT); +ENDObjClassExit(wti) + /* Initialize the wti class. Must be called as the very first method * before anything else is called inside this class. @@ -477,6 +494,7 @@ rsRetVal wtiQueryInterface(void) { return RS_RET_NOT_IMPLEMENTED; } */ BEGINObjClassInit(wti, 1, OBJ_IS_CORE_MODULE) /* one is the object version (most important for persisting) */ /* request objects we use */ + CHKiRet(objUse(glbl, CORE_COMPONENT)); ENDObjClassInit(wti) /* diff --git a/runtime/wti.h b/runtime/wti.h index 0cd6744e..6b60b833 100644 --- a/runtime/wti.h +++ b/runtime/wti.h @@ -31,6 +31,7 @@ /* the worker thread instance class */ typedef struct wti_s { BEGINobjInstance; + int bOptimizeUniProc; /* cache for the equally-named global setting, pulled at time of queue creation */ pthread_t thrdID; /* thread ID */ qWrkCmd_t tCurrCmd; /* current command to be carried out by worker */ obj_t *pUsrp; /* pointer to an object meaningful for current user pointer (e.g. queue pUsr data elemt) */ diff --git a/runtime/wtp.c b/runtime/wtp.c index 3beae271..04eb974f 100644 --- a/runtime/wtp.c +++ b/runtime/wtp.c @@ -40,15 +40,22 @@ #include <unistd.h> #include <errno.h> +#ifdef OS_SOLARIS +# include <sched.h> +# define pthread_yield() sched_yield() +#endif + #include "rsyslog.h" #include "stringbuf.h" #include "srUtils.h" #include "wtp.h" #include "wti.h" #include "obj.h" +#include "glbl.h" /* static data */ DEFobjStaticHelpers +DEFobjCurrIf(glbl) /* forward-definitions */ @@ -75,6 +82,7 @@ static rsRetVal NotImplementedDummy() { return RS_RET_OK; } /* Standard-Constructor for the wtp object */ BEGINobjConstruct(wtp) /* be sure to specify the object type also in END macro! */ + pThis->bOptimizeUniProc = glbl.GetOptimizeUniProc(); pthread_mutex_init(&pThis->mut, NULL); pthread_mutex_init(&pThis->mutThrdShutdwn, NULL); pthread_cond_init(&pThis->condThrdTrm, NULL); @@ -478,7 +486,7 @@ wtpStartWrkr(wtp_t *pThis, int bLockMutex) ISOBJ_TYPE_assert(pThis, wtp); - wtpProcessThrdChanges(pThis); + wtpProcessThrdChanges(pThis); // TODO: Performance: this causes a lot of FUTEX calls BEGIN_MTX_PROTECTED_OPERATIONS(&pThis->mut, bLockMutex); @@ -506,7 +514,8 @@ wtpStartWrkr(wtp_t *pThis, int bLockMutex) * hold the queue's mutex, but at least it has a chance to start on a single-CPU system. */ # if !defined(__hpux) /* pthread_yield is missing there! */ - pthread_yield(); + if(pThis->bOptimizeUniProc) + pthread_yield(); # endif /* indicate we just started a worker and would like to see it running */ @@ -639,12 +648,22 @@ finalize_it: /* dummy */ rsRetVal wtpQueryInterface(void) { return RS_RET_NOT_IMPLEMENTED; } +/* exit our class + */ +BEGINObjClassExit(wtp, OBJ_IS_CORE_MODULE) /* CHANGE class also in END MACRO! */ +CODESTARTObjClassExit(nsdsel_gtls) + /* release objects we no longer need */ + objRelease(glbl, CORE_COMPONENT); +ENDObjClassExit(wtp) + + /* Initialize the stream class. Must be called as the very first method * before anything else is called inside this class. * rgerhards, 2008-01-09 */ BEGINObjClassInit(wtp, 1, OBJ_IS_CORE_MODULE) /* request objects we use */ + CHKiRet(objUse(glbl, CORE_COMPONENT)); ENDObjClassInit(wtp) /* diff --git a/runtime/wtp.h b/runtime/wtp.h index 0f21ac11..b9cb07c5 100644 --- a/runtime/wtp.h +++ b/runtime/wtp.h @@ -52,6 +52,7 @@ typedef enum { /* the worker thread pool (wtp) object */ typedef struct wtp_s { BEGINobjInstance; + int bOptimizeUniProc; /* cache for the equally-named global setting, pulled at time of queue creation */ wtpState_t wtpState; int iNumWorkerThreads;/* number of worker threads to use */ int iCurNumWrkThrd;/* current number of active worker threads */ diff --git a/shave-libtool.in b/shave-libtool.in new file mode 100644 index 00000000..54ebd690 --- /dev/null +++ b/shave-libtool.in @@ -0,0 +1,109 @@ +#!/bin/sh +# +# Copyright (c) 2009, Damien Lespiau <damien.lespiau@gmail.com> +# +# Permission is hereby granted, free of charge, to any person +# obtaining a copy of this software and associated documentation +# files (the "Software"), to deal in the Software without +# restriction, including without limitation the rights to use, +# copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the +# Software is furnished to do so, subject to the following +# conditions: +# +# The above copyright notice and this permission notice shall be +# included in all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES +# OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT +# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +# OTHER DEALINGS IN THE SOFTWARE. + +# we need sed +SED=@SED@ +if test -z "$SED" ; then +SED=sed +fi + +lt_unmangle () +{ + last_result=`echo $1 | $SED -e 's#.libs/##' -e 's#[0-9a-zA-Z_\-\.]*_la-##'` +} + +# the real libtool to use +LIBTOOL="$1" +shift + +# if 1, don't print anything, the underlaying wrapper will do it +pass_though=0 + +# scan the arguments, keep the right ones for libtool, and discover the mode +preserved_args= + +# have we seen the --tag option of libtool in the command line ? +tag_seen=0 + +while test "$#" -gt 0; do + opt="$1" + shift + + case $opt in + --mode=*) + mode=`echo $opt | $SED -e 's/[-_a-zA-Z0-9]*=//'` + preserved_args="$preserved_args $opt" + ;; + -o) + lt_output="$1" + preserved_args="$preserved_args $opt" + ;; + --tag=*) + tag_seen=1 + preserved_args="$preserved_args $opt" + ;; + *) + preserved_args="$preserved_args $opt" + ;; + esac +done + +case "$mode" in +compile) + # shave will be called and print the actual CC/CXX/LINK line + preserved_args="$preserved_args --shave-mode=$mode" + pass_though=1 + ;; +link) + preserved_args="$preserved_args --shave-mode=$mode" + Q=" LINK " + ;; +*) + # let's u + # echo "*** libtool: Unimplemented mode: $mode, fill a bug report" + ;; +esac + +lt_unmangle "$lt_output" +output=$last_result + +# automake does not add a --tag switch to its libtool invocation when +# assembling a .s file and rely on libtool to infer the right action based +# on the compiler name. As shave is using CC to hook a wrapper, libtool gets +# confused. Let's detect these cases and add a --tag=CC option. +tag="" +if test $tag_seen -eq 0 -a x"$mode" = xcompile; then + tag="--tag=CC" +fi + +if test -z $V; then + if test $pass_though -eq 0; then + echo "$Q$output" + fi + $LIBTOOL --silent $tag $preserved_args +else + echo $LIBTOOL $tag $preserved_args + $LIBTOOL $tag $preserved_args +fi diff --git a/shave.in b/shave.in new file mode 100644 index 00000000..afed42e1 --- /dev/null +++ b/shave.in @@ -0,0 +1,102 @@ +#!/bin/sh +# +# Copyright (c) 2009, Damien Lespiau <damien.lespiau@gmail.com> +# +# Permission is hereby granted, free of charge, to any person +# obtaining a copy of this software and associated documentation +# files (the "Software"), to deal in the Software without +# restriction, including without limitation the rights to use, +# copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the +# Software is furnished to do so, subject to the following +# conditions: +# +# The above copyright notice and this permission notice shall be +# included in all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES +# OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT +# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +# OTHER DEALINGS IN THE SOFTWARE. + +# we need sed +SED=@SED@ +if test -z "$SED" ; then +SED=sed +fi + +lt_unmangle () +{ + last_result=`echo $1 | $SED -e 's#.libs/##' -e 's#[0-9a-zA-Z_\-\.]*_la-##'` +} + +# the tool to wrap (cc, cxx, ar, ranlib, ..) +tool="$1" +shift + +# the reel tool (to call) +REEL_TOOL="$1" +shift + +pass_through=0 +preserved_args= +while test "$#" -gt 0; do + opt="$1" + shift + + case $opt in + --shave-mode=*) + mode=`echo $opt | $SED -e 's/[-_a-zA-Z0-9]*=//'` + ;; + -o) + lt_output="$1" + preserved_args="$preserved_args $opt" + ;; + *) + preserved_args="$preserved_args $opt" + ;; + esac +done + +# mode=link is handled in the libtool wrapper +case "$mode,$tool" in +link,*) + pass_through=1 + ;; +*,cxx) + Q=" CXX " + ;; +*,cc) + Q=" CC " + ;; +*,fc) + Q=" FC " + ;; +*,f77) + Q=" F77 " + ;; +*,objc) + Q=" OBJC " + ;; +*,*) + # should not happen + Q=" CC " + ;; +esac + +lt_unmangle "$lt_output" +output=$last_result + +if test -z $V; then + if test $pass_through -eq 0; then + echo "$Q$output" + fi + $REEL_TOOL $preserved_args +else + echo $REEL_TOOL $preserved_args + $REEL_TOOL $preserved_args +fi diff --git a/tcps_sess.c b/tcps_sess.c index 3024c313..cfee0523 100644 --- a/tcps_sess.c +++ b/tcps_sess.c @@ -43,6 +43,8 @@ #include "obj.h" #include "errmsg.h" #include "netstrm.h" +#include "msg.h" +#include "datetime.h" /* static data */ @@ -50,6 +52,7 @@ DEFobjStaticHelpers DEFobjCurrIf(glbl) DEFobjCurrIf(errmsg) DEFobjCurrIf(netstrm) +DEFobjCurrIf(datetime) static int iMaxLine; /* maximum size of a single message */ @@ -94,12 +97,9 @@ CODESTARTobjDestruct(tcps_sess) pThis->pSrv->pOnSessDestruct(&pThis->pUsr); } /* now destruct our own properties */ - if(pThis->fromHost != NULL) - free(pThis->fromHost); - if(pThis->fromHostIP != NULL) - free(pThis->fromHostIP); - if(pThis->pMsg != NULL) - free(pThis->pMsg); + free(pThis->fromHost); + free(pThis->fromHostIP); + free(pThis->pMsg); ENDobjDestruct(tcps_sess) @@ -121,10 +121,7 @@ SetHost(tcps_sess_t *pThis, uchar *pszHost) ISOBJ_TYPE_assert(pThis, tcps_sess); - if(pThis->fromHost != NULL) { - free(pThis->fromHost); - } - + free(pThis->fromHost); pThis->fromHost = pszHost; RETiRet; @@ -141,10 +138,7 @@ SetHostIP(tcps_sess_t *pThis, uchar *pszHostIP) ISOBJ_TYPE_assert(pThis, tcps_sess); - if(pThis->fromHostIP != NULL) { - free(pThis->fromHostIP); - } - + free(pThis->fromHostIP); pThis->fromHostIP = pszHostIP; RETiRet; @@ -182,6 +176,18 @@ SetTcpsrv(tcps_sess_t *pThis, tcpsrv_t *pSrv) } +/* set our parent listener info*/ +static rsRetVal +SetLstnInfo(tcps_sess_t *pThis, tcpLstnPortList_t *pLstnInfo) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, tcps_sess); + assert(pLstnInfo != NULL); + pThis->pLstnInfo = pLstnInfo; + RETiRet; +} + + static rsRetVal SetUsrP(tcps_sess_t *pThis, void *pUsr) { @@ -191,6 +197,62 @@ SetUsrP(tcps_sess_t *pThis, void *pUsr) } +static rsRetVal +SetOnMsgReceive(tcps_sess_t *pThis, rsRetVal (*OnMsgReceive)(tcps_sess_t*, uchar*, int)) +{ + DEFiRet; + pThis->DoSubmitMessage = OnMsgReceive; + RETiRet; +} + + +/* This is a helper for submitting the message to the rsyslog core. + * It does some common processing, including resetting the various + * state variables to a "processed" state. + * Note that this function is also called if we had a buffer overflow + * due to a too-long message. So far, there is no indication this + * happened and it may be worth thinking about different handling + * of this case (what obviously would require a change to this + * function or some related code). + * rgerhards, 2009-04-23 + */ +static rsRetVal +defaultDoSubmitMessage(tcps_sess_t *pThis, struct syslogTime *stTime, time_t ttGenTime) +{ + msg_t *pMsg; + DEFiRet; + + ISOBJ_TYPE_assert(pThis, tcps_sess); + + if(pThis->DoSubmitMessage != NULL) { + pThis->DoSubmitMessage(pThis, pThis->pMsg, pThis->iMsg); + FINALIZE; + } + + /* we now create our own message object and submit it to the queue */ + CHKiRet(msgConstructWithTime(&pMsg, stTime, ttGenTime)); + /* first trim the buffer to what we have actually received */ + CHKmalloc(pMsg->pszRawMsg = malloc(sizeof(uchar) * pThis->iMsg)); + memcpy(pMsg->pszRawMsg, pThis->pMsg, pThis->iMsg); + pMsg->iLenRawMsg = pThis->iMsg; + MsgSetInputName(pMsg, pThis->pLstnInfo->pszInputName, pThis->pLstnInfo->lenInputName); + MsgSetFlowControlType(pMsg, eFLOWCTL_LIGHT_DELAY); + pMsg->msgFlags = NEEDS_PARSING | PARSE_HOSTNAME; + pMsg->bParseHOSTNAME = 1; + MsgSetRcvFrom(pMsg, pThis->fromHost); + CHKiRet(MsgSetRcvFromIP(pMsg, pThis->fromHostIP)); + CHKiRet(submitMsg(pMsg)); + +finalize_it: + /* reset status variables */ + pThis->bAtStrtOfFram = 1; + pThis->iMsg = 0; + + RETiRet; +} + + + /* This should be called before a normal (non forced) close * of a TCP session. This function checks if there is any unprocessed * message left in the TCP stream. Such a message is probably a @@ -205,6 +267,8 @@ SetUsrP(tcps_sess_t *pThis, void *pUsr) static rsRetVal PrepareClose(tcps_sess_t *pThis) { + struct syslogTime stTime; + time_t ttGenTime; DEFiRet; ISOBJ_TYPE_assert(pThis, tcps_sess); @@ -230,9 +294,8 @@ PrepareClose(tcps_sess_t *pThis) * this case. */ dbgprintf("Extra data at end of stream in legacy syslog/tcp message - processing\n"); - parseAndSubmitMessage(pThis->fromHost, pThis->fromHostIP, pThis->pMsg, pThis->iMsg, MSG_PARSE_HOSTNAME, - NOFLAG, eFLOWCTL_LIGHT_DELAY, NULL); /* TODO: add real InputName */ - pThis->bAtStrtOfFram = 1; + datetime.getCurrTime(&stTime, &ttGenTime); + defaultDoSubmitMessage(pThis, &stTime, ttGenTime); } finalize_it: @@ -267,7 +330,7 @@ Close(tcps_sess_t *pThis) * rgerhards, 2008-03-14 */ static rsRetVal -processDataRcvd(tcps_sess_t *pThis, char c) +processDataRcvd(tcps_sess_t *pThis, char c, struct syslogTime *stTime, time_t ttGenTime) { DEFiRet; ISOBJ_TYPE_assert(pThis, tcps_sess); @@ -313,9 +376,7 @@ processDataRcvd(tcps_sess_t *pThis, char c) if(pThis->iMsg >= iMaxLine) { /* emergency, we now need to flush, no matter if we are at end of message or not... */ dbgprintf("error: message received is larger than max msg size, we split it\n"); - parseAndSubmitMessage(pThis->fromHost, pThis->fromHostIP, pThis->pMsg, pThis->iMsg, - MSG_PARSE_HOSTNAME, NOFLAG, eFLOWCTL_LIGHT_DELAY, NULL); /* TODO: add real InputName */ - pThis->iMsg = 0; + defaultDoSubmitMessage(pThis, stTime, ttGenTime); /* we might think if it is better to ignore the rest of the * message than to treat it as a new one. Maybe this is a good * candidate for a configuration parameter... @@ -323,10 +384,10 @@ processDataRcvd(tcps_sess_t *pThis, char c) */ } - if(c == '\n' && pThis->eFraming == TCP_FRAMING_OCTET_STUFFING) { /* record delemiter? */ - parseAndSubmitMessage(pThis->fromHost, pThis->fromHostIP, pThis->pMsg, pThis->iMsg, - MSG_PARSE_HOSTNAME, NOFLAG, eFLOWCTL_LIGHT_DELAY, NULL); /* TODO: add real InputName */ - pThis->iMsg = 0; + if(( (c == '\n') + || ((pThis->pSrv->addtlFrameDelim != TCPSRV_NO_ADDTL_DELIMITER) && (c == pThis->pSrv->addtlFrameDelim)) + ) && pThis->eFraming == TCP_FRAMING_OCTET_STUFFING) { /* record delimiter? */ + defaultDoSubmitMessage(pThis, stTime, ttGenTime); pThis->inputState = eAtStrtFram; } else { /* IMPORTANT: here we copy the actual frame content to the message - for BOTH framing modes! @@ -343,9 +404,7 @@ processDataRcvd(tcps_sess_t *pThis, char c) pThis->iOctetsRemain--; if(pThis->iOctetsRemain < 1) { /* we have end of frame! */ - parseAndSubmitMessage(pThis->fromHost, pThis->fromHostIP, pThis->pMsg, pThis->iMsg, - MSG_PARSE_HOSTNAME, NOFLAG, eFLOWCTL_LIGHT_DELAY, NULL); /* TODO: add real InputName */ - pThis->iMsg = 0; + defaultDoSubmitMessage(pThis, stTime, ttGenTime); pThis->inputState = eAtStrtFram; } } @@ -366,22 +425,29 @@ processDataRcvd(tcps_sess_t *pThis, char c) * RS_RET_OK, which means the session should be kept open * or anything else, which means it must be closed. * rgerhards, 2008-03-01 + * As a performance optimization, we pick up the timestamp here. Acutally, + * this *is* the *correct* reception step for all the data we received, because + * we have just received a bunch of data! -- rgerhards, 2009-06-16 */ static rsRetVal DataRcvd(tcps_sess_t *pThis, char *pData, size_t iLen) { - DEFiRet; + struct syslogTime stTime; + time_t ttGenTime; char *pEnd; + DEFiRet; ISOBJ_TYPE_assert(pThis, tcps_sess); assert(pData != NULL); assert(iLen > 0); + datetime.getCurrTime(&stTime, &ttGenTime); + /* We now copy the message to the session buffer. */ pEnd = pData + iLen; /* this is one off, which is intensional */ while(pData < pEnd) { - CHKiRet(processDataRcvd(pThis, *pData++)); + CHKiRet(processDataRcvd(pThis, *pData++, &stTime, ttGenTime)); } finalize_it: @@ -414,10 +480,12 @@ CODESTARTobjQueryInterface(tcps_sess) pIf->SetUsrP = SetUsrP; pIf->SetTcpsrv = SetTcpsrv; + pIf->SetLstnInfo = SetLstnInfo; pIf->SetHost = SetHost; pIf->SetHostIP = SetHostIP; pIf->SetStrm = SetStrm; pIf->SetMsgIdx = SetMsgIdx; + pIf->SetOnMsgReceive = SetOnMsgReceive; finalize_it: ENDobjQueryInterface(tcps_sess) @@ -430,6 +498,7 @@ CODESTARTObjClassExit(tcps_sess) /* release objects we no longer need */ objRelease(errmsg, CORE_COMPONENT); objRelease(netstrm, LM_NETSTRMS_FILENAME); + objRelease(datetime, CORE_COMPONENT); ENDObjClassExit(tcps_sess) @@ -441,6 +510,7 @@ BEGINObjClassInit(tcps_sess, 1, OBJ_IS_CORE_MODULE) /* class, version - CHANGE c /* request objects we use */ CHKiRet(objUse(errmsg, CORE_COMPONENT)); CHKiRet(objUse(netstrm, LM_NETSTRMS_FILENAME)); + CHKiRet(objUse(datetime, CORE_COMPONENT)); CHKiRet(objUse(glbl, CORE_COMPONENT)); iMaxLine = glbl.GetMaxLine(); /* get maximum size we currently support */ diff --git a/tcps_sess.h b/tcps_sess.h index 576466ff..5e59aaab 100644 --- a/tcps_sess.h +++ b/tcps_sess.h @@ -29,9 +29,10 @@ struct tcpsrv_s; /* the tcps_sess object */ -typedef struct tcps_sess_s { +struct tcps_sess_s { BEGINobjInstance; /* Data to implement generic object - MUST be the first data element! */ - struct tcpsrv_s *pSrv; /* pointer back to my server (e.g. for callbacks) */ + tcpsrv_t *pSrv; /* pointer back to my server (e.g. for callbacks) */ + tcpLstnPortList_t *pLstnInfo; /* pointer back to listener info */ netstrm_t *pStrm; int iMsg; /* index of next char to store in msg */ int bAtStrtOfFram; /* are we at the very beginning of a new frame? */ @@ -45,8 +46,9 @@ typedef struct tcps_sess_s { uchar *pMsg; /* message (fragment) received */ uchar *fromHost; uchar *fromHostIP; - void *pUsr; /* a user-pointer */ -} tcps_sess_t; + void *pUsr; /* a user-pointer */ + rsRetVal (*DoSubmitMessage)(tcps_sess_t*, uchar*, int); /* submit message callback */ +}; /* interfaces */ @@ -60,13 +62,20 @@ BEGINinterface(tcps_sess) /* name must also be changed in ENDinterface macro! */ rsRetVal (*DataRcvd)(tcps_sess_t *pThis, char *pData, size_t iLen); /* set methods */ rsRetVal (*SetTcpsrv)(tcps_sess_t *pThis, struct tcpsrv_s *pSrv); + rsRetVal (*SetLstnInfo)(tcps_sess_t *pThis, tcpLstnPortList_t *pLstnInfo); rsRetVal (*SetUsrP)(tcps_sess_t*, void*); rsRetVal (*SetHost)(tcps_sess_t *pThis, uchar*); rsRetVal (*SetHostIP)(tcps_sess_t *pThis, uchar*); rsRetVal (*SetStrm)(tcps_sess_t *pThis, netstrm_t*); rsRetVal (*SetMsgIdx)(tcps_sess_t *pThis, int); + rsRetVal (*SetOnMsgReceive)(tcps_sess_t *pThis, rsRetVal (*OnMsgReceive)(tcps_sess_t*, uchar*, int)); ENDinterface(tcps_sess) -#define tcps_sessCURR_IF_VERSION 1 /* increment whenever you change the interface structure! */ +#define tcps_sessCURR_IF_VERSION 2 /* increment whenever you change the interface structure! */ +/* interface changes + * to version v2, rgerhards, 2009-05-22 + * - Data structures changed + * - SetLstnInfo entry point added + */ /* prototypes */ @@ -1,8 +1,11 @@ /* tcpsrv.c * - * Common code for plain TCP based servers. This is currently being + * Common code for plain TCP syslog based servers. This is currently being * utilized by imtcp and imgssapi. * + * NOTE: this is *not* a generic TCP server, but one for syslog servers. For + * generic stream servers, please use ./runtime/strmsrv.c! + * * There are actually two classes within the tcpserver code: one is * the tcpsrv itself, the other one is its sessions. This is a helper * class to tcpsrv. @@ -17,7 +20,7 @@ * * File begun on 2007-12-21 by RGerhards (extracted from syslogd.c) * - * Copyright 2007, 2008 Rainer Gerhards and Adiscon GmbH. + * Copyright 2007, 2008, 2009 Rainer Gerhards and Adiscon GmbH. * * This file is part of rsyslog. * @@ -66,6 +69,7 @@ #include "netstrm.h" #include "nssel.h" #include "errmsg.h" +#include "unicode-helper.h" MODULE_TYPE_LIB @@ -85,43 +89,61 @@ DEFobjCurrIf(netstrm) DEFobjCurrIf(nssel) -/* configure TCP listener settings. This is called during command - * line parsing. The argument following -t is supplied as an argument. - * The format of this argument is - * "<port-to-use>, <nbr-of-sessions>" - * Typically, there is no whitespace between port and session number. - * (but it may be...). - * NOTE: you can not use dbgprintf() in here - the dbgprintf() system is - * not yet initilized when this function is called. - * rgerhards, 2007-06-21 - * The port in cOptarg is handed over to us - the caller MUST NOT free it! +/* add new listener port to listener port list + * rgerhards, 2009-05-21 + */ +static inline rsRetVal +addNewLstnPort(tcpsrv_t *pThis, uchar *pszPort) +{ + tcpLstnPortList_t *pEntry; + DEFiRet; + + ISOBJ_TYPE_assert(pThis, tcpsrv); + + /* create entry */ + CHKmalloc(pEntry = malloc(sizeof(tcpLstnPortList_t))); + pEntry->pszPort = pszPort; + pEntry->pSrv = pThis; + CHKmalloc(pEntry->pszInputName = ustrdup(pThis->pszInputName)); + pEntry->lenInputName = ustrlen(pEntry->pszInputName); + + /* and add to list */ + pEntry->pNext = pThis->pLstnPorts; + pThis->pLstnPorts = pEntry; + +finalize_it: + RETiRet; +} + + +/* configure TCP listener settings. + * Note: pszPort is handed over to us - the caller MUST NOT free it! * rgerhards, 2008-03-20 */ -static void -configureTCPListen(tcpsrv_t *pThis, char *cOptarg) +static rsRetVal +configureTCPListen(tcpsrv_t *pThis, uchar *pszPort) { - register int i; - register char *pArg = cOptarg; + int i; + uchar *pPort = pszPort; + DEFiRet; - assert(cOptarg != NULL); + assert(pszPort != NULL); ISOBJ_TYPE_assert(pThis, tcpsrv); /* extract port */ i = 0; - while(isdigit((int) *pArg)) { - i = i * 10 + *pArg++ - '0'; + while(isdigit((int) *pPort)) { + i = i * 10 + *pPort++ - '0'; } - if(pThis->TCPLstnPort != NULL) { - free(pThis->TCPLstnPort); - pThis->TCPLstnPort = NULL; - } - - if( i >= 0 && i <= 65535) { - pThis->TCPLstnPort = cOptarg; + if(i >= 0 && i <= 65535) { + CHKiRet(addNewLstnPort(pThis, pszPort)); } else { - errmsg.LogError(0, NO_ERRCODE, "Invalid TCP listen port %s - changed to 514.\n", cOptarg); + errmsg.LogError(0, NO_ERRCODE, "Invalid TCP listen port %s - ignored.\n", pszPort); } + +finalize_it: + RETiRet; } @@ -202,6 +224,8 @@ TCPSessGetNxtSess(tcpsrv_t *pThis, int iCurr) static void deinit_tcp_listener(tcpsrv_t *pThis) { int i; + tcpLstnPortList_t *pEntry; + tcpLstnPortList_t *pDel; ISOBJ_TYPE_assert(pThis, tcpsrv); @@ -219,8 +243,15 @@ static void deinit_tcp_listener(tcpsrv_t *pThis) pThis->pSessions = NULL; /* just to make sure... */ } - if(pThis->TCPLstnPort != NULL) - free(pThis->TCPLstnPort); + /* free list of tcp listen ports */ + pEntry = pThis->pLstnPorts; + while(pEntry != NULL) { + free(pEntry->pszPort); + free(pEntry->pszInputName); + pDel = pEntry; + pEntry = pEntry->pNext; + free(pDel); + } /* finally close our listen streams */ for(i = 0 ; i < pThis->iLstnMax ; ++i) { @@ -235,7 +266,8 @@ static void deinit_tcp_listener(tcpsrv_t *pThis) static rsRetVal addTcpLstn(void *pUsr, netstrm_t *pLstn) { - tcpsrv_t *pThis = (tcpsrv_t*) pUsr; + tcpLstnPortList_t *pPortList = (tcpLstnPortList_t *) pUsr; + tcpsrv_t *pThis = pPortList->pSrv; DEFiRet; ISOBJ_TYPE_assert(pThis, tcpsrv); @@ -245,6 +277,7 @@ addTcpLstn(void *pUsr, netstrm_t *pLstn) ABORT_FINALIZE(RS_RET_MAX_LSTN_REACHED); pThis->ppLstn[pThis->iLstnMax] = pLstn; + pThis->ppLstnPort[pThis->iLstnMax] = pPortList; ++pThis->iLstnMax; finalize_it: @@ -252,19 +285,20 @@ finalize_it: } -/* Initialize TCP sockets (for listener) and listens on them */ -static rsRetVal -create_tcp_socket(tcpsrv_t *pThis) +/* Initialize TCP listener socket for a single port + * rgerhards, 2009-05-21 + */ +static inline rsRetVal +initTCPListener(tcpsrv_t *pThis, tcpLstnPortList_t *pPortEntry) { DEFiRet; uchar *TCPLstnPort; ISOBJ_TYPE_assert(pThis, tcpsrv); + assert(pPortEntry != NULL); - if(!strcmp((char*)pThis->TCPLstnPort, "0")) - TCPLstnPort = (uchar*)"514"; - // TODO: we need to enable the caller to set a port (based on who is - // using this, 514 may be totally unsuitable... --- rgerhards, 2008-04-22 + if(!ustrcmp(pPortEntry->pszPort, UCHAR_CONSTANT("0"))) + TCPLstnPort = UCHAR_CONSTANT("514"); /* use default - we can not do service db update, because there is * no IANA-assignment for syslog/tcp. In the long term, we might * re-use RFC 3195 port of 601, but that would probably break to @@ -272,10 +306,31 @@ create_tcp_socket(tcpsrv_t *pThis) * rgerhards, 2007-06-28 */ else - TCPLstnPort = (uchar*)pThis->TCPLstnPort; + TCPLstnPort = pPortEntry->pszPort; /* TODO: add capability to specify local listen address! */ - CHKiRet(netstrm.LstnInit(pThis->pNS, (void*)pThis, addTcpLstn, TCPLstnPort, NULL, pThis->iSessMax)); + CHKiRet(netstrm.LstnInit(pThis->pNS, (void*)pPortEntry, addTcpLstn, TCPLstnPort, NULL, pThis->iSessMax)); + +finalize_it: + RETiRet; +} + + +/* Initialize TCP sockets (for listener) and listens on them */ +static rsRetVal +create_tcp_socket(tcpsrv_t *pThis) +{ + tcpLstnPortList_t *pEntry; + DEFiRet; + + ISOBJ_TYPE_assert(pThis, tcpsrv); + + /* init all configured ports */ + pEntry = pThis->pLstnPorts; + while(pEntry != NULL) { + CHKiRet(initTCPListener(pThis, pEntry)); + pEntry = pEntry->pNext; + } /* OK, we had success. Now it is also time to * initialize our connections @@ -297,7 +352,7 @@ finalize_it: /* Accept new TCP connection; make entry in session table. If there * is no more space left in the connection table, the new TCP * connection is immediately dropped. - * ppSess has a pointer to the newly created session, if it succeds. + * ppSess has a pointer to the newly created session, if it succeeds. * If it does not succeed, no session is created and ppSess is * undefined. If the user has provided an OnSessAccept Callback, * this one is executed immediately after creation of the @@ -305,7 +360,7 @@ finalize_it: * rgerhards, 2008-03-02 */ static rsRetVal -SessAccept(tcpsrv_t *pThis, tcps_sess_t **ppSess, netstrm_t *pStrm) +SessAccept(tcpsrv_t *pThis, tcpLstnPortList_t *pLstnInfo, tcps_sess_t **ppSess, netstrm_t *pStrm) { DEFiRet; tcps_sess_t *pSess = NULL; @@ -316,6 +371,7 @@ SessAccept(tcpsrv_t *pThis, tcps_sess_t **ppSess, netstrm_t *pStrm) uchar *fromHostIP = NULL; ISOBJ_TYPE_assert(pThis, tcpsrv); + assert(pLstnInfo != NULL); CHKiRet(netstrm.AcceptConnReq(pStrm, &pNewStrm)); @@ -325,13 +381,15 @@ SessAccept(tcpsrv_t *pThis, tcps_sess_t **ppSess, netstrm_t *pStrm) errno = 0; errmsg.LogError(0, RS_RET_MAX_SESS_REACHED, "too many tcp sessions - dropping incoming request"); ABORT_FINALIZE(RS_RET_MAX_SESS_REACHED); - } else { - /* we found a free spot and can construct our session object */ - CHKiRet(tcps_sess.Construct(&pSess)); - CHKiRet(tcps_sess.SetTcpsrv(pSess, pThis)); } - /* OK, we have a "good" index... */ + /* we found a free spot and can construct our session object */ + CHKiRet(tcps_sess.Construct(&pSess)); + CHKiRet(tcps_sess.SetTcpsrv(pSess, pThis)); + CHKiRet(tcps_sess.SetLstnInfo(pSess, pLstnInfo)); + if(pThis->OnMsgReceive != NULL) + CHKiRet(tcps_sess.SetOnMsgReceive(pSess, pThis->OnMsgReceive)); + /* get the host name */ CHKiRet(netstrm.GetRemoteHName(pNewStrm, &fromHostFQDN)); CHKiRet(netstrm.GetRemoteIP(pNewStrm, &fromHostIP)); @@ -376,12 +434,10 @@ finalize_it: if(iRet != RS_RET_OK) { if(pSess != NULL) tcps_sess.Destruct(&pSess); - if(fromHostFQDN != NULL) - free(fromHostFQDN); - if(fromHostIP != NULL) - free(fromHostIP); if(pNewStrm != NULL) netstrm.Destruct(&pNewStrm); + free(fromHostFQDN); + free(fromHostIP); } RETiRet; @@ -445,7 +501,7 @@ Run(tcpsrv_t *pThis) CHKiRet(nssel.IsReady(pSel, pThis->ppLstn[i], NSDSEL_RD, &bIsReady, &nfds)); if(bIsReady) { dbgprintf("New connect on NSD %p.\n", pThis->ppLstn[i]); - SessAccept(pThis, &pNewSess, pThis->ppLstn[i]); + SessAccept(pThis, pThis->ppLstnPort[i], &pNewSess, pThis->ppLstn[i]); --nfds; /* indicate we have processed one */ } } @@ -455,7 +511,7 @@ Run(tcpsrv_t *pThis) while(nfds && iTCPSess != -1) { CHKiRet(nssel.IsReady(pSel, pThis->pSessions[iTCPSess]->pStrm, NSDSEL_RD, &bIsReady, &nfds)); if(bIsReady) { - char buf[8*1024]; /* reception buffer - may hold a partial or multiple messages */ + char buf[128*1024]; /* reception buffer - may hold a partial or multiple messages */ dbgprintf("netstream %p with new data\n", pThis->pSessions[iTCPSess]->pStrm); /* Receive message */ @@ -513,6 +569,8 @@ finalize_it: /* this is a very special case - this time only we do not exit the /* Standard-Constructor */ BEGINobjConstruct(tcpsrv) /* be sure to specify the object type also in END macro! */ pThis->iSessMax = TCPSESS_MAX_DEFAULT; /* TODO: useful default ;) */ + pThis->addtlFrameDelim = TCPSRV_NO_ADDTL_DELIMITER; + pThis->OnMsgReceive = NULL; ENDobjConstruct(tcpsrv) @@ -535,6 +593,7 @@ tcpsrvConstructFinalize(tcpsrv_t *pThis) /* set up listeners */ CHKmalloc(pThis->ppLstn = calloc(TCPLSTN_MAX_DEFAULT, sizeof(netstrm_t*))); + CHKmalloc(pThis->ppLstnPort = calloc(TCPLSTN_MAX_DEFAULT, sizeof(tcpLstnPortList_t*))); iRet = pThis->OpenLstnSocks(pThis); finalize_it: @@ -556,10 +615,10 @@ CODESTARTobjDestruct(tcpsrv) if(pThis->pNS != NULL) netstrms.Destruct(&pThis->pNS); - if(pThis->pszDrvrAuthMode != NULL) - free(pThis->pszDrvrAuthMode); - if(pThis->ppLstn != NULL) - free(pThis->ppLstn); + free(pThis->pszDrvrAuthMode); + free(pThis->ppLstn); + free(pThis->ppLstnPort); + free(pThis->pszInputName); ENDobjDestruct(tcpsrv) @@ -657,6 +716,45 @@ SetUsrP(tcpsrv_t *pThis, void *pUsr) RETiRet; } +static rsRetVal +SetOnMsgReceive(tcpsrv_t *pThis, rsRetVal (*OnMsgReceive)(tcps_sess_t*, uchar*, int)) +{ + DEFiRet; + assert(OnMsgReceive != NULL); + pThis->OnMsgReceive = OnMsgReceive; + RETiRet; +} + + + +/* Set additional framing to use (if any) -- rgerhards, 2008-12-10 */ +static rsRetVal +SetAddtlFrameDelim(tcpsrv_t *pThis, int iDelim) +{ + DEFiRet; + ISOBJ_TYPE_assert(pThis, tcpsrv); + pThis->addtlFrameDelim = iDelim; + RETiRet; +} + + +/* Set the input name to use -- rgerhards, 2008-12-10 */ +static rsRetVal +SetInputName(tcpsrv_t *pThis, uchar *name) +{ + uchar *pszName; + DEFiRet; + ISOBJ_TYPE_assert(pThis, tcpsrv); + if(name == NULL) + pszName = NULL; + else + CHKmalloc(pszName = ustrdup(name)); + free(pThis->pszInputName); + pThis->pszInputName = pszName; +finalize_it: + RETiRet; +} + /* here follows a number of methods that shuffle authentication settings down * to the drivers. Drivers not supporting these settings may return an error @@ -680,7 +778,7 @@ SetDrvrAuthMode(tcpsrv_t *pThis, uchar *mode) { DEFiRet; ISOBJ_TYPE_assert(pThis, tcpsrv); - CHKmalloc(pThis->pszDrvrAuthMode = (uchar*)strdup((char*)mode)); + CHKmalloc(pThis->pszDrvrAuthMode = ustrdup(mode)); finalize_it: RETiRet; } @@ -735,12 +833,14 @@ CODESTARTobjQueryInterface(tcpsrv) pIf->ConstructFinalize = tcpsrvConstructFinalize; pIf->Destruct = tcpsrvDestruct; - pIf->SessAccept = SessAccept; + //pIf->SessAccept = SessAccept; pIf->configureTCPListen = configureTCPListen; pIf->create_tcp_socket = create_tcp_socket; pIf->Run = Run; pIf->SetUsrP = SetUsrP; + pIf->SetInputName = SetInputName; + pIf->SetAddtlFrameDelim = SetAddtlFrameDelim; pIf->SetSessMax = SetSessMax; pIf->SetDrvrMode = SetDrvrMode; pIf->SetDrvrAuthMode = SetDrvrAuthMode; @@ -755,6 +855,7 @@ CODESTARTobjQueryInterface(tcpsrv) pIf->SetCBOnDestruct = SetCBOnDestruct; pIf->SetCBOnRegularClose = SetCBOnRegularClose; pIf->SetCBOnErrClose = SetCBOnErrClose; + pIf->SetOnMsgReceive = SetOnMsgReceive; finalize_it: ENDobjQueryInterface(tcpsrv) @@ -25,17 +25,39 @@ #include "obj.h" #include "tcps_sess.h" +/* support for framing anomalies */ +typedef enum ETCPsyslogFramingAnomaly { + frame_normal = 0, + frame_NetScreen = 1, + frame_CiscoIOS = 2 +} eTCPsyslogFramingAnomaly; + + +/* list of tcp listen ports */ +struct tcpLstnPortList_s { + uchar *pszPort; /**< the ports the listener shall listen on */ + uchar *pszInputName; /**< value to be used as input name */ + size_t lenInputName; /**< length of inputName */ + tcpsrv_t *pSrv; /**< pointer to higher-level server instance */ + tcpLstnPortList_t *pNext; /**< next port or NULL */ +}; + +#define TCPSRV_NO_ADDTL_DELIMITER -1 /* specifies that no additional delimiter is to be used in TCP framing */ + /* the tcpsrv object */ struct tcpsrv_s { BEGINobjInstance; /**< Data to implement generic object - MUST be the first data element! */ netstrms_t *pNS; /**< pointer to network stream subsystem */ int iDrvrMode; /**< mode of the stream driver to use */ uchar *pszDrvrAuthMode; /**< auth mode of the stream driver to use */ + uchar *pszInputName; /**< value to be used as input name */ permittedPeers_t *pPermPeers;/**< driver's permitted peers */ int iLstnMax; /**< max nbr of listeners currently supported */ netstrm_t **ppLstn; /**< our netstream listners */ + tcpLstnPortList_t **ppLstnPort; /**< pointer to relevant listen port description */ int iSessMax; /**< max number of sessions supported */ - char *TCPLstnPort; /**< the port the listener shall listen on */ + tcpLstnPortList_t *pLstnPorts; /**< head pointer for listen ports */ + int addtlFrameDelim; /**< additional frame delimiter for plain TCP syslog framing (e.g. to handle NetScreen) */ tcps_sess_t **pSessions;/**< array of all of our sessions */ void *pUsr; /**< a user-settable pointer (provides extensibility for "derived classes")*/ /* callbacks */ @@ -50,6 +72,7 @@ struct tcpsrv_s { rsRetVal (*pOnSessAccept)(tcpsrv_t *, tcps_sess_t*); rsRetVal (*OnSessConstructFinalize)(void*); rsRetVal (*pOnSessDestruct)(void*); + rsRetVal (*OnMsgReceive)(tcps_sess_t *, uchar *pszMsg, int iLenMsg); /* submit message callback */ }; @@ -59,11 +82,13 @@ BEGINinterface(tcpsrv) /* name must also be changed in ENDinterface macro! */ rsRetVal (*Construct)(tcpsrv_t **ppThis); rsRetVal (*ConstructFinalize)(tcpsrv_t __attribute__((unused)) *pThis); rsRetVal (*Destruct)(tcpsrv_t **ppThis); - void (*configureTCPListen)(tcpsrv_t*, char *cOptarg); - rsRetVal (*SessAccept)(tcpsrv_t *pThis, tcps_sess_t **ppSess, netstrm_t *pStrm); + rsRetVal (*configureTCPListen)(tcpsrv_t*, uchar *pszPort); + //rsRetVal (*SessAccept)(tcpsrv_t *pThis, tcpLstnPortList_t*, tcps_sess_t **ppSess, netstrm_t *pStrm); rsRetVal (*create_tcp_socket)(tcpsrv_t *pThis); rsRetVal (*Run)(tcpsrv_t *pThis); /* set methods */ + rsRetVal (*SetAddtlFrameDelim)(tcpsrv_t*, int); + rsRetVal (*SetInputName)(tcpsrv_t*, uchar*); rsRetVal (*SetUsrP)(tcpsrv_t*, void*); rsRetVal (*SetCBIsPermittedHost)(tcpsrv_t*, int (*) (struct sockaddr *addr, char*, void*, void*)); rsRetVal (*SetCBOpenLstnSocks)(tcpsrv_t *, rsRetVal (*)(tcpsrv_t*)); @@ -79,10 +104,17 @@ BEGINinterface(tcpsrv) /* name must also be changed in ENDinterface macro! */ rsRetVal (*SetCBOnSessAccept)(tcpsrv_t*, rsRetVal (*) (tcpsrv_t*, tcps_sess_t*)); rsRetVal (*SetCBOnSessDestruct)(tcpsrv_t*, rsRetVal (*) (void*)); rsRetVal (*SetCBOnSessConstructFinalize)(tcpsrv_t*, rsRetVal (*) (void*)); - /* added v4 */ + /* added v5 */ rsRetVal (*SetSessMax)(tcpsrv_t *pThis, int iMaxSess); /* 2009-04-09 */ + /* added v6 */ + rsRetVal (*SetOnMsgReceive)(tcpsrv_t *pThis, rsRetVal (*OnMsgReceive)(tcps_sess_t*, uchar*, int)); /* 2009-05-24 */ ENDinterface(tcpsrv) -#define tcpsrvCURR_IF_VERSION 4 /* increment whenever you change the interface structure! */ +#define tcpsrvCURR_IF_VERSION 6 /* increment whenever you change the interface structure! */ +/* change for v4: + * - SetAddtlFrameDelim() added -- rgerhards, 2008-12-10 + * - SetInputName() added -- rgerhards, 2008-12-10 + * change for v5 and up: see above + */ /* prototypes */ @@ -47,6 +47,8 @@ static struct template *tplRoot = NULL; /* the root of the template list */ static struct template *tplLast = NULL; /* points to the last element of the template list */ static struct template *tplLastStatic = NULL; /* last static element of the template list */ + + /* This functions converts a template into a string. It should * actually be in template.c, but this requires larger re-structuring * of the code (because all the property-access functions are static @@ -86,7 +88,7 @@ rsRetVal tplToString(struct template *pTpl, msg_t *pMsg, uchar** ppSz) * free the obtained value (if requested). We continue this * loop until we got hold of all values. */ - CHKiRet(rsCStrConstruct(&pCStr)); + CHKiRet(cstrConstruct(&pCStr)); pTpe = pTpl->pEntryRoot; while(pTpe != NULL) { @@ -97,7 +99,7 @@ rsRetVal tplToString(struct template *pTpl, msg_t *pMsg, uchar** ppSz) ) { dbgprintf("error %d during tplToString()\n", iRet); /* it does not make sense to continue now */ - rsCStrDestruct(&pCStr); + cstrDestruct(&pCStr); FINALIZE; } } else if(pTpe->eEntryType == FIELD) { @@ -117,7 +119,7 @@ rsRetVal tplToString(struct template *pTpl, msg_t *pMsg, uchar** ppSz) CHKiRet_Hdlr(rsCStrAppendStrWithLen(pCStr, (uchar*) pVal, iLenVal)) { dbgprintf("error %d during tplToString()\n", iRet); /* it does not make sense to continue now */ - rsCStrDestruct(&pCStr); + cstrDestruct(&pCStr); if(bMustBeFreed) free(pVal); FINALIZE; @@ -131,8 +133,8 @@ rsRetVal tplToString(struct template *pTpl, msg_t *pMsg, uchar** ppSz) /* we are done with the template, now let's convert the result into a * "real" (usable) string and discard the helper structures. */ - CHKiRet(rsCStrFinish(pCStr)); - CHKiRet(rsCStrConvSzStrAndDestruct(pCStr, &pVal, 0)); + CHKiRet(cstrFinalize(pCStr)); + CHKiRet(cstrConvSzStrAndDestruct(pCStr, &pVal, 0)); finalize_it: *ppSz = (iRet == RS_RET_OK) ? pVal : NULL; @@ -140,6 +142,60 @@ finalize_it: RETiRet; } + +/* This functions converts a template into an array of strings. + * For further general details, see the very similar funtion + * tpltoString(). + * Instead of a string, an array of string pointers is returned by + * thus function. The caller is repsonsible for destroying that array as + * well as all of its elements. The array is of fixed size. It's end + * is indicated by a NULL pointer. + * rgerhards, 2009-04-03 + */ +rsRetVal tplToArray(struct template *pTpl, msg_t *pMsg, uchar*** ppArr) +{ + DEFiRet; + struct templateEntry *pTpe; + uchar **pArr; + int iArr; + unsigned short bMustBeFreed; + uchar *pVal; + + assert(pTpl != NULL); + assert(pMsg != NULL); + assert(ppArr != NULL); + + /* loop through the template. We obtain one value, create a + * private copy (if necessary), add it to the string array + * and then on to the next until we have processed everything. + */ + + CHKmalloc(pArr = calloc(pTpl->tpenElements + 1, sizeof(uchar*))); + iArr = 0; + + pTpe = pTpl->pEntryRoot; + while(pTpe != NULL) { + if(pTpe->eEntryType == CONSTANT) { + CHKmalloc(pArr[iArr] = (uchar*)strdup((char*) pTpe->data.constant.pConstant)); + } else if(pTpe->eEntryType == FIELD) { + pVal = (uchar*) MsgGetProp(pMsg, pTpe, NULL, &bMustBeFreed); + if(bMustBeFreed) { /* if it must be freed, it is our own private copy... */ + pArr[iArr] = pVal; /* ... so we can use it! */ + } else { + CHKmalloc(pArr[iArr] = (uchar*)strdup((char*) pVal)); + } + } + iArr++; + pTpe = pTpe->pNext; + } + +finalize_it: + *ppArr = (iRet == RS_RET_OK) ? pArr : NULL; + + RETiRet; +} + + /* Helper to doSQLEscape. This is called if doSQLEscape * runs out of memory allocating the escaped string. * Then we are in trouble. We can @@ -216,21 +272,21 @@ doSQLEscape(uchar **pp, size_t *pLen, unsigned short *pbMustBeFreed, int escapeM p = *pp; iLen = *pLen; - CHKiRet(rsCStrConstruct(&pStrB)); + CHKiRet(cstrConstruct(&pStrB)); while(*p) { if(*p == '\'') { - CHKiRet(rsCStrAppendChar(pStrB, (escapeMode == 0) ? '\'' : '\\')); + CHKiRet(cstrAppendChar(pStrB, (escapeMode == 0) ? '\'' : '\\')); iLen++; /* reflect the extra character */ } else if((escapeMode == 1) && (*p == '\\')) { - CHKiRet(rsCStrAppendChar(pStrB, '\\')); + CHKiRet(cstrAppendChar(pStrB, '\\')); iLen++; /* reflect the extra character */ } - CHKiRet(rsCStrAppendChar(pStrB, *p)); + CHKiRet(cstrAppendChar(pStrB, *p)); ++p; } - CHKiRet(rsCStrFinish(pStrB)); - CHKiRet(rsCStrConvSzStrAndDestruct(pStrB, &pszGenerated, 0)); + CHKiRet(cstrFinalize(pStrB)); + CHKiRet(cstrConvSzStrAndDestruct(pStrB, &pszGenerated, 0)); if(*pbMustBeFreed) free(*pp); /* discard previous value */ @@ -243,7 +299,7 @@ finalize_it: if(iRet != RS_RET_OK) { doSQLEmergencyEscape(*pp, escapeMode); if(pStrB != NULL) - rsCStrDestruct(&pStrB); + cstrDestruct(&pStrB); } RETiRet; @@ -320,7 +376,7 @@ static int do_Constant(unsigned char **pp, struct template *pTpl) p = *pp; - if(rsCStrConstruct(&pStrB) != RS_RET_OK) + if(cstrConstruct(&pStrB) != RS_RET_OK) return 1; rsCStrSetAllocIncrement(pStrB, 32); /* process the message and expand escapes @@ -331,22 +387,22 @@ static int do_Constant(unsigned char **pp, struct template *pTpl) switch(*++p) { case '\0': /* the best we can do - it's invalid anyhow... */ - rsCStrAppendChar(pStrB, *p); + cstrAppendChar(pStrB, *p); break; case 'n': - rsCStrAppendChar(pStrB, '\n'); + cstrAppendChar(pStrB, '\n'); ++p; break; case 'r': - rsCStrAppendChar(pStrB, '\r'); + cstrAppendChar(pStrB, '\r'); ++p; break; case '\\': - rsCStrAppendChar(pStrB, '\\'); + cstrAppendChar(pStrB, '\\'); ++p; break; case '%': - rsCStrAppendChar(pStrB, '%'); + cstrAppendChar(pStrB, '%'); ++p; break; case '0': /* numerical escape sequence */ @@ -363,15 +419,15 @@ static int do_Constant(unsigned char **pp, struct template *pTpl) while(*p && isdigit((int)*p)) { i = i * 10 + *p++ - '0'; } - rsCStrAppendChar(pStrB, i); + cstrAppendChar(pStrB, i); break; default: - rsCStrAppendChar(pStrB, *p++); + cstrAppendChar(pStrB, *p++); break; } } else - rsCStrAppendChar(pStrB, *p++); + cstrAppendChar(pStrB, *p++); } if((pTpe = tpeConstruct(pTpl)) == NULL) { @@ -382,14 +438,14 @@ static int do_Constant(unsigned char **pp, struct template *pTpl) return 1; } pTpe->eEntryType = CONSTANT; - rsCStrFinish(pStrB); + cstrFinalize(pStrB); /* We obtain the length from the counted string object * (before we delete it). Later we might take additional * benefit from the counted string object. * 2005-09-09 rgerhards */ pTpe->data.constant.iLenConstant = rsCStrLen(pStrB); - if(rsCStrConvSzStrAndDestruct(pStrB, &pTpe->data.constant.pConstant, 0) != RS_RET_OK) + if(cstrConvSzStrAndDestruct(pStrB, &pTpe->data.constant.pConstant, 0) != RS_RET_OK) return 1; *pp = p; @@ -460,6 +516,8 @@ static void doOptions(unsigned char **pp, struct templateEntry *pTpe) pTpe->data.field.options.bSecPathDrop = 1; } else if(!strcmp((char*)Buf, "secpath-replace")) { pTpe->data.field.options.bSecPathReplace = 1; + } else if(!strcmp((char*)Buf, "csv")) { + pTpe->data.field.options.bCSV = 1; } else { dbgprintf("Invalid field option '%s' specified - ignored.\n", Buf); } @@ -494,7 +552,7 @@ static int do_Parameter(unsigned char **pp, struct template *pTpl) p = (unsigned char*) *pp; - if(rsCStrConstruct(&pStrB) != RS_RET_OK) + if(cstrConstruct(&pStrB) != RS_RET_OK) return 1; if((pTpe = tpeConstruct(pTpl)) == NULL) { @@ -505,13 +563,13 @@ static int do_Parameter(unsigned char **pp, struct template *pTpl) pTpe->eEntryType = FIELD; while(*p && *p != '%' && *p != ':') { - rsCStrAppendChar(pStrB, tolower(*p)); + cstrAppendChar(pStrB, tolower(*p)); ++p; /* do NOT do this in tolower()! */ } /* got the name*/ - rsCStrFinish(pStrB); - if(rsCStrConvSzStrAndDestruct(pStrB, &pTpe->data.field.pPropRepl, 0) != RS_RET_OK) + cstrFinalize(pStrB); + if(cstrConvSzStrAndDestruct(pStrB, &pTpe->data.field.pPropRepl, 0) != RS_RET_OK) return 1; /* Check frompos, if it has an R, then topos should be a regex */ @@ -1105,6 +1163,9 @@ void tplPrintList(void) if(pTpe->data.field.options.bSPIffNo1stSP) { dbgprintf("[SP iff no first SP] "); } + if(pTpe->data.field.options.bCSV) { + dbgprintf("[format as CSV (RFC4180)]"); + } if(pTpe->data.field.options.bDropLastLF) { dbgprintf("[drop last LF in msg] "); } @@ -94,9 +94,10 @@ struct templateEntry { unsigned bSpaceCC: 1; /* change control characters to spaceescape? */ unsigned bEscapeCC: 1; /* escape control characters? */ unsigned bDropLastLF: 1; /* drop last LF char in msg (PIX!) */ - unsigned bSecPathDrop: 1; /* drop slashes, replace dots, empty string */ - unsigned bSecPathReplace: 1; /* replace slashes, replace dots, empty string */ - unsigned bSPIffNo1stSP: 1; /* replace slashes, replace dots, empty string */ + unsigned bSecPathDrop: 1; /* drop slashes, replace dots, empty string */ + unsigned bSecPathReplace: 1; /* replace slashes, replace dots, empty string */ + unsigned bSPIffNo1stSP: 1; /* replace slashes, replace dots, empty string */ + unsigned bCSV: 1; /* format field in CSV (RFC 4180) format */ } options; /* options as bit fields */ } field; } data; @@ -125,6 +126,7 @@ void tplLastStaticInit(struct template *tpl); * BEFORE msg.h, even if your code file does not actually need it. * rgerhards, 2007-08-06 */ +rsRetVal tplToArray(struct template *pTpl, msg_t *pMsg, uchar*** ppArr); rsRetVal tplToString(struct template *pTpl, msg_t *pMsg, uchar** ppSz); rsRetVal doSQLEscape(uchar **pp, size_t *pLen, unsigned short *pbMustBeFreed, int escapeMode); diff --git a/tests/1.rstest b/tests/1.rstest index 5c152589..4716e8b3 100644 --- a/tests/1.rstest +++ b/tests/1.rstest @@ -4,23 +4,23 @@ in: 'test 1' <> $var or /* some comment */($SEVERITY == -4 +5 -(3 * - 2) and $fromhost == '127.0.0.1') then $$$ out: -00000000: PUSHCONSTANT test 1[cstr] -00000001: PUSHMSGVAR var[cstr] -00000002: != -00000003: PUSHMSGVAR severity[cstr] -00000004: PUSHCONSTANT 4[nbr] -00000005: UNARY_MINUS -00000006: PUSHCONSTANT 5[nbr] -00000007: + -00000008: PUSHCONSTANT 3[nbr] -00000009: PUSHCONSTANT 2[nbr] -00000010: UNARY_MINUS -00000011: * -00000012: - -00000013: == -00000014: PUSHMSGVAR fromhost[cstr] -00000015: PUSHCONSTANT 127.0.0.1[cstr] -00000016: == +00000000: push_const test 1[cstr] +00000001: push_msgvar var[cstr] +00000002: cmp_!= +00000003: push_msgvar severity[cstr] +00000004: push_const 4[nbr] +00000005: unary_minus +00000006: push_const 5[nbr] +00000007: add +00000008: push_const 3[nbr] +00000009: push_const 2[nbr] +00000010: unary_minus +00000011: mul +00000012: sub +00000013: cmp_== +00000014: push_msgvar fromhost[cstr] +00000015: push_const 127.0.0.1[cstr] +00000016: cmp_== 00000017: and 00000018: or $$$ diff --git a/tests/2.rstest b/tests/2.rstest index 7fb5b799..f0e8205b 100644 --- a/tests/2.rstest +++ b/tests/2.rstest @@ -4,7 +4,7 @@ in: $msg contains 'test' then $$$ out: -00000000: PUSHMSGVAR msg[cstr] -00000001: PUSHCONSTANT test[cstr] +00000000: push_msgvar msg[cstr] +00000001: push_const test[cstr] 00000002: contains $$$ diff --git a/tests/3.rstest b/tests/3.rstest new file mode 100644 index 00000000..e75d9754 --- /dev/null +++ b/tests/3.rstest @@ -0,0 +1,21 @@ +# a simple RainerScript test +result: 0 +in: +strlen($msg & strlen('abc')) > 20 +30 + -40 then +$$$ +out: +00000000: push_msgvar msg[cstr] +00000001: push_const abc[cstr] +00000002: push_const 1[nbr] +00000003: func_call strlen +00000004: strconcat +00000005: push_const 1[nbr] +00000006: func_call strlen +00000007: push_const 20[nbr] +00000008: push_const 30[nbr] +00000009: add +00000010: push_const 40[nbr] +00000011: unary_minus +00000012: add +00000013: cmp_> +$$$ diff --git a/tests/DiagTalker.java b/tests/DiagTalker.java new file mode 100644 index 00000000..04e12327 --- /dev/null +++ b/tests/DiagTalker.java @@ -0,0 +1,70 @@ +/* A yet very simple tool to talk to imdiag. + * + * Copyright 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ +//package com.rsyslog.diag; +import java.io.*; +import java.net.*; + +public class DiagTalker { + public static void main(String[] args) throws IOException { + + Socket diagSocket = null; + PrintWriter out = null; + BufferedReader in = null; + final String host = "127.0.0.1"; + final int port = 13500; + + try { + diagSocket = new Socket(host, port); + diagSocket.setSoTimeout(0); /* wait for lenghty operations */ + out = new PrintWriter(diagSocket.getOutputStream(), true); + in = new BufferedReader(new InputStreamReader( + diagSocket.getInputStream())); + } catch (UnknownHostException e) { + System.err.println("can not resolve " + host + "!"); + System.exit(1); + } catch (IOException e) { + System.err.println("Couldn't get I/O for " + + "the connection to: " + host + "."); + System.exit(1); + } + + BufferedReader stdIn = new BufferedReader( + new InputStreamReader(System.in)); + String userInput; + + try { + while ((userInput = stdIn.readLine()) != null) { + out.println(userInput); + System.out.println("imdiag returns: " + in.readLine()); + } + } catch (SocketException e) { + System.err.println("We had a socket exception and consider this to be OK: " + + e.getMessage()); + } + + out.close(); + in.close(); + stdIn.close(); + diagSocket.close(); + } +} + diff --git a/tests/Makefile.am b/tests/Makefile.am index 802a3ccb..3f5a6c33 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -1,18 +1,33 @@ -check_PROGRAMS = rt_init rscript -TESTS = $(check_PROGRAMS) cfg.sh \ - validation-run.sh -TESTS_ENVIRONMENT = RSYSLOG_MODDIR='$(abs_top_builddir)'/runtime/.libs/ -#TESTS = $(check_PROGRAMS) +if ENABLE_TESTBENCH +TESTRUNS = rt_init rscript +check_PROGRAMS = $(TESTRUNS) ourtail nettester tcpflood chkseq +TESTS = $(TESTRUNS) cfg.sh \ + validation-run.sh \ + imtcp-multiport.sh \ + diskqueue.sh \ + manytcp.sh \ + queue-persist.sh + +if ENABLE_OMSTDOUT +TESTS += omod-if-array.sh parsertest.sh inputname.sh fieldtest.sh +endif + +check_JAVA = DiagTalker.java +endif # if ENABLE_TESTBENCH + +TESTS_ENVIRONMENT = RSYSLOG_MODDIR='$(abs_top_builddir)'/runtime/.libs/ +DISTCLEANFILES=rsyslog.pid '$(abs_top_builddir)'/DiagTalker.class test_files = testbench.h runtime-dummy.c -EXTRA_DIST=1.rstest 2.rstest err1.rstest \ + +EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \ validation-run.sh \ testsuites/invalid.conf \ testsuites/valid.conf \ cfg.sh \ cfg1.cfgtest \ cfg1.testin \ - cfg2.cfgtest \ + cfg2.cfgtest \ cfg2.testin \ cfg3.cfgtest \ cfg3.testin \ @@ -20,14 +35,63 @@ EXTRA_DIST=1.rstest 2.rstest err1.rstest \ cfg4.testin \ DevNull.cfgtest \ err1.rstest \ - NoExistFile.cfgtest + NoExistFile.cfgtest \ + testsuites/parse1.conf \ + testsuites/field1.conf \ + testsuites/1.parse1 \ + testsuites/2.parse1 \ + testsuites/3.parse1 \ + testsuites/date1.parse1 \ + testsuites/date2.parse1 \ + testsuites/date3.parse1 \ + testsuites/date4.parse1 \ + testsuites/date5.parse1 \ + testsuites/rfc3164.parse1 \ + testsuites/rfc5424-1.parse1 \ + testsuites/rfc5424-2.parse1 \ + testsuites/rfc5424-3.parse1 \ + testsuites/rfc5424-4.parse1 \ + testsuites/omod-if-array.conf \ + testsuites/1.omod-if-array \ + testsuites/1.field1 \ + killrsyslog.sh \ + parsertest.sh \ + fieldtest.sh \ + diskqueue.sh \ + testsuites/diskqueue.conf \ + imtcp-multiport.sh \ + testsuites/imtcp-multiport.conf \ + manytcp.sh \ + testsuites/manytcp.conf \ + inputname.sh \ + testsuites/inputname_imtcp.conf \ + testsuites/1.inputname_imtcp_12514 \ + testsuites/1.inputname_imtcp_12515 \ + testsuites/1.inputname_imtcp_12516 \ + omod-if-array.sh \ + diag.sh \ + testsuites/diag-common.conf \ + queue-persist.sh \ + queue-persist-drvr.sh \ + testsuites/queue-persist.conf \ + DiagTalker.java \ + cfg.sh + +ourtail_SOURCES = ourtail.c +chkseq_SOURCES = chkseq.c + +tcpflood_SOURCES = tcpflood.c +tcpflood_LDADD = $(SOL_LIBS) + +nettester_SOURCES = nettester.c getline.c +nettester_LDADD = $(SOL_LIBS) rt_init_SOURCES = rt-init.c $(test_files) rt_init_CPPFLAGS = -I$(top_srcdir) $(PTHREADS_CFLAGS) $(RSRT_CFLAGS) -rt_init_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS) +rt_init_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS) $(SOL_LIBS) rt_init_LDFLAGS = -export-dynamic -rscript_SOURCES = rscript.c $(test_files) +rscript_SOURCES = rscript.c getline.c $(test_files) rscript_CPPFLAGS = -I$(top_srcdir) $(PTHREADS_CFLAGS) $(RSRT_CFLAGS) -rscript_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS) +rscript_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS) $(SOL_LIBS) rscript_LDFLAGS = -export-dynamic diff --git a/tests/cfg.sh b/tests/cfg.sh index 99729823..cb838354 100755 --- a/tests/cfg.sh +++ b/tests/cfg.sh @@ -36,7 +36,7 @@ echo "local directory" # # check empty config file # -../tools/rsyslogd -c3 -N1 -f/dev/null 2>&1 |tail --lines=+2 > tmp +../tools/rsyslogd -c4 -N1 -f/dev/null 2>&1 |./ourtail |head -2 > tmp cmp tmp $srcdir/DevNull.cfgtest if [ ! $? -eq 0 ]; then echo "DevNull.cfgtest failed" @@ -51,7 +51,7 @@ fi; # # check missing config file # -../tools/rsyslogd -c3 -N1 -f/This/does/not/exist 2>&1 |tail --lines=+2 > tmp +../tools/rsyslogd -c4 -N1 -f/This/does/not/exist 2>&1 |./ourtail |head -2 > tmp cmp tmp $srcdir/NoExistFile.cfgtest if [ ! $? -eq 0 ]; then echo "NoExistFile.cfgtest failed" @@ -74,7 +74,7 @@ exit 0 # # check config with invalid directive # -../tools/rsyslogd -c3 -u2 -N1 -f$srcdir/cfg1.testin 2>&1 |tail --lines=+2 > tmp +../tools/rsyslogd -c4 -u2 -N1 -f$srcdir/cfg1.testin 2>&1 |./ourtail > tmp cmp tmp $srcdir/cfg1.cfgtest if [ ! $? -eq 0 ]; then echo "cfg1.cfgtest failed" @@ -91,7 +91,7 @@ fi; # the one with the invalid config directive, so that we may see # an effect of the included config ;) # -../tools/rsyslogd -c3 -u2 -N1 -f$srcdir/cfg2.testin 2>&1 |tail --lines=+2 > tmp +../tools/rsyslogd -c4 -u2 -N1 -f$srcdir/cfg2.testin 2>&1 |./ourtail > tmp cmp tmp $srcdir/cfg2.cfgtest if [ ! $? -eq 0 ]; then echo "cfg2.cfgtest failed" @@ -106,7 +106,7 @@ fi; # # check included config file, where included file does not exist # -../tools/rsyslogd -c3 -u2 -N1 -f$srcdir/cfg3.testin 2>&1 |tail --lines=+2 > tmp +../tools/rsyslogd -c4 -u2 -N1 -f$srcdir/cfg3.testin 2>&1 |./ourtail > tmp cmp tmp $srcdir/cfg3.cfgtest if [ ! $? -eq 0 ]; then echo "cfg3.cfgtest failed" @@ -121,7 +121,7 @@ fi; # # check a reasonable complex, but correct, log file # -../tools/rsyslogd -c3 -u2 -N1 -f$srcdir/cfg4.testin 2>&1 |tail --lines=+2 > tmp +../tools/rsyslogd -c4 -u2 -N1 -f$srcdir/cfg4.testin 2>&1 |./ourtail > tmp cmp tmp $srcdir/cfg4.cfgtest if [ ! $? -eq 0 ]; then echo "cfg4.cfgtest failed" diff --git a/tests/chkseq.c b/tests/chkseq.c new file mode 100644 index 00000000..8c5fc61a --- /dev/null +++ b/tests/chkseq.c @@ -0,0 +1,112 @@ +/* Checks if a file consists of line of strictly monotonically + * increasing numbers. An expected start and end number may + * be set. + * + * Params + * -f<filename> MUST be given! + * -s<starting number> -e<ending number> + * default for s is 0. -e should be given (else it is also 0) + * -d may be specified, in which case duplicate messages are permitted. + * + * Part of the testbench for rsyslog. + * + * Copyright 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ +#include "config.h" +#include <stdio.h> +#include <stdlib.h> +#include <getopt.h> + +int main(int argc, char *argv[]) +{ + FILE *fp; + int val; + int i; + int ret = 0; + int dupsPermitted = 0; + int start = 0, end = 0; + int opt; + int nDups = 0; + char *file = NULL; + + while((opt = getopt(argc, argv, "e:f:ds:")) != EOF) { + switch((char)opt) { + case 'f': + file = optarg; + break; + case 'd': + dupsPermitted = 1; + break; + case 'e': + end = atoi(optarg); + break; + case 's': + start = atoi(optarg); + break; + default:printf("Invalid call of chkseq\n"); + printf("Usage: chkseq file -sstart -eend -d\n"); + exit(1); + } + } + + if(file == NULL) { + printf("file must be given!\n"); + exit(1); + } + + if(start > end) { + printf("start must be less than or equal end!\n"); + exit(1); + } + + /* read file */ + fp = fopen(file, "r"); + if(fp == NULL) { + printf("error opening file '%s'\n", file); + perror(file); + exit(1); + } + + for(i = start ; i < end+1 ; ++i) { + if(fscanf(fp, "%d\n", &val) != 1) { + printf("scanf error in index i=%d\n", i); + exit(1); + } + if(val != i) { + if(val == i - 1 && dupsPermitted) { + --i; + ++nDups; + } else { + printf("read value %d, but expected value %d\n", val, i); + exit(1); + } + } + } + + if(nDups != 0) + printf("info: had %d duplicates (this is no error)\n", nDups); + + if(i - 1 != end) { + printf("only %d records in file, expected %d\n", i - 1, end); + exit(1); + } + + exit(ret); +} diff --git a/tests/diag.sh b/tests/diag.sh new file mode 100755 index 00000000..1ceca75b --- /dev/null +++ b/tests/diag.sh @@ -0,0 +1,85 @@ +# this shell script provides commands to the common diag system. It enables +# test scripts to wait for certain conditions and initiate certain actions. +# needs support in config file. +# NOTE: this file should be included with "source diag.sh", as it otherwise is +# not always able to convey back states to the upper-level test driver +# begun 2009-05-27 by rgerhards +# This file is part of the rsyslog project, released under GPLv3 +#valgrind="valgrind --log-fd=1" +#valgrind="valgrind --tool=drd --log-fd=1" +#valgrind="valgrind --tool=helgrind --log-fd=1" +#set -o xtrace +#export RSYSLOG_DEBUG="debug nostdout printmutexaction" +#export RSYSLOG_DEBUGLOG="log" +case $1 in + 'init') $srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason + cp $srcdir/testsuites/diag-common.conf diag-common.conf + rm -f rsyslogd.started work-*.conf + rm -f work rsyslog.out.log rsyslog.out.log.save # common work files + rm -rf test-spool + mkdir test-spool + ;; + 'exit') rm -f rsyslogd.started work-*.conf diag-common.conf + rm -f work rsyslog.out.log rsyslog.out.log.save # common work files + rm -rf test-spool + ;; + 'startup') # start rsyslogd with default params. $2 is the config file name to use + # returns only after successful startup + $valgrind ../tools/rsyslogd -c4 -u2 -n -irsyslog.pid -M../runtime/.libs:../.libs -f$srcdir/testsuites/$2 & + $srcdir/diag.sh wait-startup + ;; + 'wait-startup') # wait for rsyslogd startup + while test ! -f rsyslogd.started; do + true + done + echo "rsyslogd started with pid " `cat rsyslog.pid` + ;; + 'wait-shutdown') # actually, we wait for rsyslog.pid to be deleted + while test -f rsyslog.pid; do + true + done + ;; + 'wait-queueempty') # wait for main message queue to be empty + echo WaitMainQueueEmpty | java -classpath $abs_top_builddir DiagTalker + ;; + 'shutdown-when-empty') # shut rsyslogd down when main queue is empty + $srcdir/diag.sh wait-queueempty + kill `cat rsyslog.pid` + # note: we do not wait for the actual termination! + ;; + 'shutdown-immediate') # shut rsyslogd down without emptying the queue + kill `cat rsyslog.pid` + # note: we do not wait for the actual termination! + ;; + 'tcpflood') # do a tcpflood run and check if it worked params are passed to tcpflood + ./tcpflood $2 $3 $4 $5 $6 $7 $8 + if [ "$?" -ne "0" ]; then + echo "error during tcpflood! see rsyslog.out.log.save for what was written" + cp rsyslog.out.log rsyslog.out.log.save + exit 1 + fi + ;; + 'injectmsg') # inject messages via our inject interface (imdiag) + echo injectmsg $2 $3 $4 $5 | java -classpath $abs_top_builddir DiagTalker + # TODO: some return state checking? (does it really make sense here?) + ;; + 'check-mainq-spool') # check if mainqueue spool files exist, if not abort (we just check .qi) + echo There must exist some files now: + ls -l test-spool + if test ! -f test-spool/mainq.qi; then + echo "error: mainq.qi does not exist where expected to do so!" + ls -l test-spool + exit 1 + fi + ;; + 'seq-check') # do the usual sequence check to see if everything was properly received + rm -f work + sort < rsyslog.out.log > work + ./chkseq -fwork -e$2 $3 + if [ "$?" -ne "0" ]; then + echo "sequence error detected" + exit 1 + fi + ;; + *) echo "invalid argument" $1 +esac diff --git a/tests/diskqueue.sh b/tests/diskqueue.sh new file mode 100755 index 00000000..2fe31db9 --- /dev/null +++ b/tests/diskqueue.sh @@ -0,0 +1,15 @@ +# Test for disk-only queue mode +# This test checks if queue files can be correctly written +# and read back, but it does not test the transition from +# memory to disk mode for DA queues. +# added 2009-04-17 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +# uncomment for debugging support: +echo testing queue disk-only mode +source $srcdir/diag.sh init +source $srcdir/diag.sh startup diskqueue.conf +# 20000 messages should be enough - the disk test is slow enough ;) +source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1 20000 +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh seq-check 0 19999 +source $srcdir/diag.sh exit diff --git a/tests/fieldtest.sh b/tests/fieldtest.sh new file mode 100755 index 00000000..482fa143 --- /dev/null +++ b/tests/fieldtest.sh @@ -0,0 +1,13 @@ +echo test fieldtest via udp +$srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason + +./nettester -tfield1 -iudp +if [ "$?" -ne "0" ]; then + exit 1 +fi + +echo test fieldtest via tcp +./nettester -tfield1 -itcp +if [ "$?" -ne "0" ]; then + exit 1 +fi diff --git a/tests/getline.c b/tests/getline.c new file mode 100644 index 00000000..617d1b0e --- /dev/null +++ b/tests/getline.c @@ -0,0 +1,57 @@ +/* getline() replacement for platforms that do not have it. + * + * Part of the testbench for rsyslog. + * + * Copyright 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ +#include "config.h" +#include <stdio.h> +#include <sys/types.h> +#include <stdlib.h> + +/* we emulate getline (the dirty way) if we do not have it + * We do not try very hard, as this is just a test driver. + * rgerhards, 2009-03-31 + */ +#ifndef HAVE_GETLINE +ssize_t getline(char **lineptr, size_t *n, FILE *fp) +{ + int c; + int len = 0; + + if(*lineptr == NULL) + *lineptr = malloc(4096); /* quick and dirty! */ + + c = fgetc(fp); + while(c != EOF && c != '\n') { + (*lineptr)[len++] = c; + c = fgetc(fp); + } + if(c != EOF) /* need to add NL? */ + (*lineptr)[len++] = c; + + (*lineptr)[len] = '\0'; + + *n = len; + //printf("getline returns: '%s'\n", *lineptr); + + return (len > 0) ? len : -1; +} +#endif /* #ifndef HAVE_GETLINE */ diff --git a/tests/imtcp-multiport.sh b/tests/imtcp-multiport.sh new file mode 100755 index 00000000..702f8834 --- /dev/null +++ b/tests/imtcp-multiport.sh @@ -0,0 +1,38 @@ +# Test for multiple ports in imtcp +# This test checks if multiple tcp listener ports are correctly +# handled by imtcp +# +# NOTE: this test must (and can) be enhanced when we merge in the +# upgraded tcpflood program +# +# added 2009-05-22 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +echo testing imtcp multiple listeners +source $srcdir/diag.sh init +source $srcdir/diag.sh startup imtcp-multiport.conf +source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1 10000 +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh seq-check 0 9999 +source $srcdir/diag.sh exit +# +# +# ### now complete new cycle with other port ### +# +# +source $srcdir/diag.sh init +source $srcdir/diag.sh startup imtcp-multiport.conf +source $srcdir/diag.sh tcpflood 127.0.0.1 13515 1 10000 +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh seq-check 0 9999 +source $srcdir/diag.sh exit +# +# +# ### now complete new cycle with other port ### +# +# +source $srcdir/diag.sh init +source $srcdir/diag.sh startup imtcp-multiport.conf +source $srcdir/diag.sh tcpflood 127.0.0.1 13516 1 10000 +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh seq-check 0 9999 +source $srcdir/diag.sh exit diff --git a/tests/inputname.sh b/tests/inputname.sh new file mode 100755 index 00000000..e1a58517 --- /dev/null +++ b/tests/inputname.sh @@ -0,0 +1,20 @@ +echo testing $InputTCPServerInputName directive +$srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason + +echo port 12514 +./nettester -tinputname_imtcp_12514 -cinputname_imtcp -itcp -p12514 +if [ "$?" -ne "0" ]; then + exit 1 +fi + +echo port 12515 +./nettester -tinputname_imtcp_12515 -cinputname_imtcp -itcp -p12515 +if [ "$?" -ne "0" ]; then + exit 1 +fi + +echo port 12516 +./nettester -tinputname_imtcp_12516 -cinputname_imtcp -itcp -p12516 +if [ "$?" -ne "0" ]; then + exit 1 +fi diff --git a/tests/killrsyslog.sh b/tests/killrsyslog.sh new file mode 100755 index 00000000..b1be757b --- /dev/null +++ b/tests/killrsyslog.sh @@ -0,0 +1,7 @@ +#check if rsyslog instance exists and, if so, kill it +if [ -e "rsyslog.pid" ] +then + echo rsyslog.pid exists, trying to shut down rsyslogd process `cat rsyslog.pid`. + kill `cat rsyslog.pid` + sleep 1 +fi diff --git a/tests/manytcp.sh b/tests/manytcp.sh new file mode 100755 index 00000000..c55eb9c0 --- /dev/null +++ b/tests/manytcp.sh @@ -0,0 +1,8 @@ +# test many concurrent tcp connections +source $srcdir/diag.sh init +source $srcdir/diag.sh startup manytcp.conf +# the config file specifies exactly 1100 connections +source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1000 40000 +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh seq-check 0 39999 +source $srcdir/diag.sh exit diff --git a/tests/nettester.c b/tests/nettester.c new file mode 100644 index 00000000..566f553b --- /dev/null +++ b/tests/nettester.c @@ -0,0 +1,437 @@ +/* Runs a test suite on the rsyslog (and later potentially + * other things). + * + * The name of the test suite must be given as argv[1]. In this config, + * rsyslogd is loaded with config ./testsuites/<name>.conf and then + * test cases ./testsuites/ *.<name> are executed on it. This test driver is + * suitable for testing cases where a message sent (via UDP) results in + * exactly one response. It can not be used in cases where no response + * is expected (that would result in a hang of the test driver). + * Note: each test suite can contain many tests, but they all need to work + * with the same rsyslog configuration. + * + * Part of the testbench for rsyslog. + * + * Copyright 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ +#include "config.h" +#include <stdio.h> +#include <stdlib.h> +#include <sys/types.h> +#include <sys/socket.h> +#include <sys/wait.h> +#include <sys/stat.h> +#include <arpa/inet.h> +#include <assert.h> +#include <unistd.h> +#include <string.h> +#include <glob.h> +#include <signal.h> +#include <netinet/in.h> +#include <getopt.h> + +#define EXIT_FAILURE 1 +#define INVALID_SOCKET -1 +/* Name of input file, must match $IncludeConfig in test suite .conf files */ +#define NETTEST_INPUT_CONF_FILE "nettest.input.conf" /* name of input file, must match $IncludeConfig in .conf files */ + +typedef enum { inputUDP, inputTCP } inputMode_t; +inputMode_t inputMode = inputTCP; /* input for which tests are to be run */ +static pid_t rsyslogdPid = 0; /* pid of rsyslog instance being tested */ +static char *srcdir; /* global $srcdir, set so that we can run outside of "make check" */ +static char *testSuite = NULL; /* name of current test suite */ +static int iPort = 12514; /* port which shall be used for sending data */ +static char* pszCustomConf = NULL; /* custom config file, use -c conf to specify */ +static int verbose = 0; /* verbose output? -v option */ + + +/* provide user-friednly name of input mode + */ +static char *inputMode2Str(inputMode_t mode) +{ + char *pszMode; + + if(mode == inputUDP) + pszMode = "udp"; + else + pszMode = "tcp"; + + return pszMode; +} + + +void readLine(int fd, char *ln) +{ + char c; + int lenRead; + lenRead = read(fd, &c, 1); + while(lenRead == 1 && c != '\n') { + *ln++ = c; + lenRead = read(fd, &c, 1); + } + *ln = '\0'; +} + + +/* send a message via TCP + * We open the connection on the initial send, and never close it + * (let the OS do that). If a conneciton breaks, we do NOT try to + * recover, so all test after that one will fail (and the test + * driver probably hang. returns 0 if ok, something else otherwise. + * We use traditional framing '\n' at EOR for this tester. It may be + * worth considering additional framing modes. + * rgerhards, 2009-04-08 + */ +int +tcpSend(char *buf, int lenBuf) +{ + static int sock = INVALID_SOCKET; + struct sockaddr_in addr; + + if(sock == INVALID_SOCKET) { + /* first time, need to connect to target */ + if((sock=socket(AF_INET, SOCK_STREAM, 0))==-1) { + perror("socket()"); + return(1); + } + + memset((char *) &addr, 0, sizeof(addr)); + addr.sin_family = AF_INET; + addr.sin_port = htons(iPort); + if(inet_aton("127.0.0.1", &addr.sin_addr)==0) { + fprintf(stderr, "inet_aton() failed\n"); + return(1); + } + if(connect(sock, (struct sockaddr*)&addr, sizeof(addr)) != 0) { + fprintf(stderr, "connect() failed\n"); + return(1); + } + } + + /* send test data */ + if(send(sock, buf, lenBuf, 0) != lenBuf) { + perror("send test data"); + fprintf(stderr, "send() failed\n"); + return(1); + } + + /* send record terminator */ + if(send(sock, "\n", 1, 0) != 1) { + perror("send record terminator"); + fprintf(stderr, "send() failed\n"); + return(1); + } + + return 0; +} + + +/* send a message via UDP + * returns 0 if ok, something else otherwise. + */ +int +udpSend(char *buf, int lenBuf) +{ + struct sockaddr_in si_other; + int s, slen=sizeof(si_other); + + if((s=socket(AF_INET, SOCK_DGRAM, 0))==-1) { + perror("socket()"); + return(1); + } + + memset((char *) &si_other, 0, sizeof(si_other)); + si_other.sin_family = AF_INET; + si_other.sin_port = htons(iPort); + if(inet_aton("127.0.0.1", &si_other.sin_addr)==0) { + fprintf(stderr, "inet_aton() failed\n"); + return(1); + } + + if(sendto(s, buf, lenBuf, 0, (struct sockaddr*) &si_other, slen)==-1) { + perror("sendto"); + fprintf(stderr, "sendto() failed\n"); + return(1); + } + + close(s); + return 0; +} + + +/* open pipe to test candidate - so far, this is + * always rsyslogd and with a fixed config. Later, we may + * change this. Returns 0 if ok, something else otherwise. + * rgerhards, 2009-03-31 + */ +int openPipe(char *configFile, pid_t *pid, int *pfd) +{ + int pipefd[2]; + pid_t cpid; + char *newargv[] = {"../tools/rsyslogd", "dummy", "-c4", "-u2", "-n", "-irsyslog.pid", + "-M../runtime/.libs:../.libs", NULL }; + char confFile[1024]; + char *newenviron[] = { NULL }; + /* debug aide... + char *newenviron[] = { "RSYSLOG_DEBUG=debug nostdout", + "RSYSLOG_DEBUGLOG=tmp", NULL }; + */ + + + sprintf(confFile, "-f%s/testsuites/%s.conf", srcdir, + (pszCustomConf == NULL) ? configFile : pszCustomConf); + newargv[1] = confFile; + + if (pipe(pipefd) == -1) { + perror("pipe"); + exit(EXIT_FAILURE); + } + + cpid = fork(); + if (cpid == -1) { + perror("fork"); + exit(EXIT_FAILURE); + } + + if(cpid == 0) { /* Child reads from pipe */ + fclose(stdout); + dup(pipefd[1]); + close(pipefd[1]); + close(pipefd[0]); + fclose(stdin); + execve("../tools/rsyslogd", newargv, newenviron); + } else { + close(pipefd[1]); + *pid = cpid; + *pfd = pipefd[0]; + } + + return(0); +} + + +/* Process a specific test case. File name is provided. + * Needs to return 0 if all is OK, something else otherwise. + */ +int +processTestFile(int fd, char *pszFileName) +{ + FILE *fp; + char *testdata = NULL; + char *expected = NULL; + int ret = 0; + size_t lenLn; + char buf[4096]; + + if((fp = fopen((char*)pszFileName, "r")) == NULL) { + perror((char*)pszFileName); + return(2); + } + + /* skip comments at start of file */ + + getline(&testdata, &lenLn, fp); + while(!feof(fp)) { + if(*testdata == '#') + getline(&testdata, &lenLn, fp); + else + break; /* first non-comment */ + } + + + testdata[strlen(testdata)-1] = '\0'; /* remove \n */ + /* now we have the test data to send (we could use function pointers here...) */ + if(inputMode == inputUDP) { + if(udpSend(testdata, strlen(testdata)) != 0) + return(2); + } else { + if(tcpSend(testdata, strlen(testdata)) != 0) + return(2); + } + + /* next line is expected output + * we do not care about EOF here, this will lead to a failure and thus + * draw enough attention. -- rgerhards, 2009-03-31 + */ + getline(&expected, &lenLn, fp); + expected[strlen(expected)-1] = '\0'; /* remove \n */ + + /* pull response from server and then check if it meets our expectation */ + readLine(fd, buf); + if(strcmp(expected, buf)) { + printf("\nExpected Response:\n'%s'\nActual Response:\n'%s'\n", + expected, buf); + ret = 1; + } + + free(testdata); + free(expected); + fclose(fp); + return(ret); +} + + +/* carry out all tests. Tests are specified via a file name + * wildcard. Each of the files is read and the test carried + * out. + * Returns the number of tests that failed. Zero means all + * success. + */ +int +doTests(int fd, char *files) +{ + int iFailed = 0; + int iTests = 0; + int ret; + char *testFile; + glob_t testFiles; + size_t i = 0; + struct stat fileInfo; + + glob(files, GLOB_MARK, NULL, &testFiles); + + for(i = 0; i < testFiles.gl_pathc; i++) { + testFile = testFiles.gl_pathv[i]; + + if(stat((char*) testFile, &fileInfo) != 0) + continue; /* continue with the next file if we can't stat() the file */ + + ++iTests; + /* all regular files are run through the test logic. Symlinks don't work. */ + if(S_ISREG(fileInfo.st_mode)) { /* config file */ + if(verbose) printf("processing test case '%s' ... ", testFile); + ret = processTestFile(fd, testFile); + if(ret == 0) { + if(verbose) printf("successfully completed\n"); + } else { + if(verbose) printf("failed!\n"); + ++iFailed; + } + } + } + globfree(&testFiles); + + if(iTests == 0) { + printf("Error: no test cases found, no tests executed.\n"); + iFailed = 1; + } else { + printf("Number of tests run: %d, number of failures: %d\n", iTests, iFailed); + } + + return(iFailed); +} + +/* cleanup */ +void doAtExit(void) +{ + int status; + + if(rsyslogdPid != 0) { + kill(rsyslogdPid, SIGTERM); + waitpid(rsyslogdPid, &status, 0); /* wait until instance terminates */ + } + + unlink(NETTEST_INPUT_CONF_FILE); +} + +/* Run the test suite. This must be called with exactly one parameter, the + * name of the test suite. For details, see file header comment at the top + * of this file. + * rgerhards, 2009-04-03 + */ +int main(int argc, char *argv[]) +{ + int fd; + int opt; + int ret = 0; + FILE *fp; + char buf[4096]; + char testcases[4096]; + + while((opt = getopt(argc, argv, "c:i:p:t:v")) != EOF) { + switch((char)opt) { + case 'c': + pszCustomConf = optarg; + break; + case 'i': + if(!strcmp(optarg, "udp")) + inputMode = inputUDP; + else if(!strcmp(optarg, "tcp")) + inputMode = inputTCP; + else { + printf("error: unsupported input mode '%s'\n", optarg); + exit(1); + } + break; + case 'p': + iPort = atoi(optarg); + break; + case 't': + testSuite = optarg; + break; + case 'v': + verbose = 1; + break; + default:printf("Invalid call of nettester, invalid option '%c'.\n", opt); + printf("Usage: nettester -ttestsuite-name -iudp|tcp [-pport] [-ccustomConfFile] \n"); + exit(1); + } + } + + if(testSuite == NULL) { + printf("error: no testsuite given, need to specify -t testsuite!\n"); + exit(1); + } + + atexit(doAtExit); + + if((srcdir = getenv("srcdir")) == NULL) + srcdir = "."; + + if(verbose) printf("Start of nettester run ($srcdir=%s, testsuite=%s, input=%s/%d)\n", + srcdir, testSuite, inputMode2Str(inputMode), iPort); + + /* create input config file */ + if((fp = fopen(NETTEST_INPUT_CONF_FILE, "w")) == NULL) { + perror(NETTEST_INPUT_CONF_FILE); + printf("error opening input configuration file\n"); + exit(1); + } + if(inputMode == inputUDP) { + fputs("$ModLoad ../plugins/imudp/.libs/imudp\n", fp); + fprintf(fp, "$UDPServerRun %d\n", iPort); + } else { + fputs("$ModLoad ../plugins/imtcp/.libs/imtcp\n", fp); + fprintf(fp, "$InputTCPServerRun %d\n", iPort); + } + fclose(fp); + + /* start to be tested rsyslogd */ + openPipe(testSuite, &rsyslogdPid, &fd); + readLine(fd, buf); + + /* generate filename */ + sprintf(testcases, "%s/testsuites/*.%s", srcdir, testSuite); + if(doTests(fd, testcases) != 0) + ret = 1; + + if(verbose) printf("End of nettester run (%d).\n", ret); + exit(ret); +} diff --git a/tests/omod-if-array.sh b/tests/omod-if-array.sh new file mode 100755 index 00000000..2c2a8ef3 --- /dev/null +++ b/tests/omod-if-array.sh @@ -0,0 +1,14 @@ +echo test omod-if-array via udp +$srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason + +./nettester -tomod-if-array -iudp -p4711 +if [ "$?" -ne "0" ]; then + exit 1 +fi + +echo test omod-if-array via tcp +./nettester -tomod-if-array -itcp +if [ "$?" -ne "0" ]; then + exit 1 +fi + diff --git a/tests/ourtail.c b/tests/ourtail.c new file mode 100644 index 00000000..6781b5fe --- /dev/null +++ b/tests/ourtail.c @@ -0,0 +1,43 @@ +/* This is a quick and dirty "tail implementation", one which always + * skips the first line, but nothing else. I have done this to prevent + * the various incompatible options of tail come into my way. One could + * probably work around this by using autoconf magic, but for me it + * was much quicker writing this small C program, which really should + * be portable across all platforms. + * + * Part of the testbench for rsyslog. + * + * Copyright 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ +#include <stdio.h> + +int main(int __attribute__((unused)) argc, char __attribute__((unused)) *argv[]) +{ + int c; + + for(c = getchar() ; c != EOF && c != '\n' ; c = getchar()) + /*skip to newline*/; + + if(c == '\n') + c = getchar(); + + for( ; c != EOF ; c = getchar()) + putchar(c); +} diff --git a/tests/parsertest.sh b/tests/parsertest.sh new file mode 100755 index 00000000..afdb9469 --- /dev/null +++ b/tests/parsertest.sh @@ -0,0 +1,13 @@ +echo test parsertest via udp +$srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason + +./nettester -tparse1 -iudp +if [ "$?" -ne "0" ]; then + exit 1 +fi + +echo test parsertest via tcp +./nettester -tparse1 -itcp +if [ "$?" -ne "0" ]; then + exit 1 +fi diff --git a/tests/queue-persist-drvr.sh b/tests/queue-persist-drvr.sh new file mode 100755 index 00000000..ea5386a7 --- /dev/null +++ b/tests/queue-persist-drvr.sh @@ -0,0 +1,28 @@ +# Test for queue data persisting at shutdown. The +# plan is to start an instance, emit some data, do a relatively +# fast shutdown and then re-start the engine to process the +# remaining data. +# added 2009-05-27 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +# uncomment for debugging support: +echo testing memory queue persisting to disk, mode $1 +source $srcdir/diag.sh init + +# prepare config +echo \$MainMsgQueueType $1 > work-queuemode.conf +echo "*.* :omtesting:sleep 0 1000" > work-delay.conf + +# inject 5000 msgs, so that we do not hit the high watermark +source $srcdir/diag.sh startup queue-persist.conf +source $srcdir/diag.sh injectmsg 0 5000 +$srcdir/diag.sh shutdown-immediate +$srcdir/diag.sh wait-shutdown +source $srcdir/diag.sh check-mainq-spool + +# restart engine and have rest processed +#remove delay +echo "#" > work-delay.conf +source $srcdir/diag.sh startup queue-persist.conf +source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages +source $srcdir/diag.sh seq-check 0 4999 +source $srcdir/diag.sh exit diff --git a/tests/queue-persist.sh b/tests/queue-persist.sh new file mode 100755 index 00000000..999655b1 --- /dev/null +++ b/tests/queue-persist.sh @@ -0,0 +1,11 @@ +# Test for queue data persisting at shutdown. We use the actual driver +# to carry out multiple tests with different queue modes +# added 2009-05-27 by Rgerhards +# This file is part of the rsyslog project, released under GPLv3 +source $srcdir/queue-persist-drvr.sh LinkedList +source $srcdir/queue-persist-drvr.sh FixedArray +# the disk test should not fail, however, the config is extreme and using +# it more or less is a config error +source $srcdir/queue-persist-drvr.sh Disk +# we do not test Direct mode because this absolute can not work in direct mode +# (maybe we should do a fail-type of test?) diff --git a/tests/rscript.c b/tests/rscript.c index d4e8caeb..6361aec4 100644 --- a/tests/rscript.c +++ b/tests/rscript.c @@ -24,6 +24,7 @@ */ #include "config.h" #include <stdio.h> +#include <string.h> #include <glob.h> #include <sys/stat.h> @@ -39,6 +40,7 @@ DEFobjCurrIf(ctok) DEFobjCurrIf(ctok_token) DEFobjCurrIf(vmprg) + BEGINInit CODESTARTInit pErrObj = "expr"; CHKiRet(objUse(expr, CORE_COMPONENT)); @@ -102,8 +104,8 @@ PerformTest(cstr_t *pstrIn, rsRetVal iRetExpected, cstr_t *pstrOut) if(strcmp((char*)rsCStrGetSzStr(pstrPrg), (char*)rsCStrGetSzStr(pstrOut))) { printf("error: compiled program different from expected result!\n"); - printf("generated vmprg:\n%s\n", rsCStrGetSzStr(pstrPrg)); - printf("expected:\n%s\n", rsCStrGetSzStr(pstrOut)); + printf("generated vmprg (%d bytes):\n%s\n", (int)strlen((char*)rsCStrGetSzStr(pstrPrg)), rsCStrGetSzStr(pstrPrg)); + printf("expected (%d bytes):\n%s\n", (int)strlen((char*)rsCStrGetSzStr(pstrOut)), rsCStrGetSzStr(pstrOut)); ABORT_FINALIZE(RS_RET_ERR); } @@ -138,6 +140,7 @@ ProcessTestFile(uchar *pszFileName) size_t lenLn; cstr_t *pstrIn = NULL; cstr_t *pstrOut = NULL; + int iParse; rsRetVal iRetExpected; DEFiRet; @@ -160,10 +163,11 @@ ProcessTestFile(uchar *pszFileName) /* once we had a comment, the next line MUST be "result: <nbr>". Anything * after nbr is simply ignored. */ - if(sscanf(lnptr, "result: %d", &iRetExpected) != 1) { + if(sscanf(lnptr, "result: %d", &iParse) != 1) { printf("error in result line, scanf failed, line: '%s'\n", lnptr); ABORT_FINALIZE(RS_RET_ERR); } + iRetExpected = iParse; getline(&lnptr, &lenLn, fp); CHKEOF; /* and now we look for "in:" (and again ignore the rest...) */ diff --git a/tests/tcpflood.c b/tests/tcpflood.c new file mode 100644 index 00000000..2ca796ca --- /dev/null +++ b/tests/tcpflood.c @@ -0,0 +1,293 @@ +/* Opens a large number of tcp connections and sends + * messages over them. This is used for stress-testing. + * + * Params + * argv[1] target address + * argv[2] target port + * argv[3] number of connections + * argv[4] number of messages to send (connection is random) + * argv[5] initial message number (optional) + * + * Part of the testbench for rsyslog. + * + * Copyright 2009 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ +#include "config.h" +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#include <signal.h> +#include <sys/types.h> +#include <sys/socket.h> +#include <arpa/inet.h> +#include <assert.h> +#include <unistd.h> +#include <string.h> +#include <netinet/in.h> + +#define EXIT_FAILURE 1 +#define INVALID_SOCKET -1 +/* Name of input file, must match $IncludeConfig in test suite .conf files */ +#define NETTEST_INPUT_CONF_FILE "nettest.input.conf" /* name of input file, must match $IncludeConfig in .conf files */ + +static char *targetIP; +static int targetPort; +static int numMsgsToSend; /* number of messages to send */ +static int numConnections; /* number of connections to create */ +static int *sockArray; /* array of sockets to use */ +static int msgNum = 0; /* initial message number to start with */ + + +/* open a single tcp connection + */ +int openConn(int *fd) +{ + int sock; + struct sockaddr_in addr; + + if((sock=socket(AF_INET, SOCK_STREAM, 0))==-1) { + perror("socket()"); + return(1); + } + + memset((char *) &addr, 0, sizeof(addr)); + addr.sin_family = AF_INET; + addr.sin_port = htons(targetPort); + if(inet_aton(targetIP, &addr.sin_addr)==0) { + fprintf(stderr, "inet_aton() failed\n"); + return(1); + } + if(connect(sock, (struct sockaddr*)&addr, sizeof(addr)) != 0) { + perror("connect()"); + fprintf(stderr, "connect() failed\n"); + return(1); + } + + *fd = sock; + return 0; +} + + +/* open all requested tcp connections + * this includes allocating the connection array + */ +int openConnections(void) +{ + int i; + char msgBuf[128]; + size_t lenMsg; + + write(1, " open connections", sizeof(" open connections")-1); + sockArray = calloc(numConnections, sizeof(int)); + for(i = 0 ; i < numConnections ; ++i) { + if(i % 10 == 0) { + printf("\r%5.5d", i); + //lenMsg = sprintf(msgBuf, "\r%5.5d", i); + //write(1, msgBuf, lenMsg); + } + if(openConn(&(sockArray[i])) != 0) { + printf("error in trying to open connection i=%d\n", i); + return 1; + } + } + lenMsg = sprintf(msgBuf, "\r%5.5d open connections\n", i); + write(1, msgBuf, lenMsg); + + return 0; +} + + +/* we also close all connections because otherwise we may get very bad + * timing for the syslogd - it may not be able to process all incoming + * messages fast enough if we immediately shut down. + * TODO: it may be an interesting excercise to handle that situation + * at the syslogd level, too + * rgerhards, 2009-04-14 + */ +void closeConnections(void) +{ + int i; + char msgBuf[128]; + size_t lenMsg; + + write(1, " close connections", sizeof(" close connections")-1); + for(i = 0 ; i < numConnections ; ++i) { + if(i % 10 == 0) { + lenMsg = sprintf(msgBuf, "\r%5.5d", i); + write(1, msgBuf, lenMsg); + } + close(sockArray[i]); + } + lenMsg = sprintf(msgBuf, "\r%5.5d close connections\n", i); + write(1, msgBuf, lenMsg); + +} + + +/* send messages to the tcp connections we keep open. We use + * a very basic format that helps identify the message + * (via msgnum:<number>: e.g. msgnum:00000001:). This format is suitable + * for extracton to field-based properties. + * The first numConnection messages are sent sequentially, as are the + * last. All messages in between are sent over random connections. + * Note that message numbers start at 0. + */ +int sendMessages(void) +{ + int i; + int socknum; + int lenBuf; + int lenSend; + char buf[2048]; + + srand(time(NULL)); /* seed is good enough for our needs */ + + printf("Sending %d messages.\n", numMsgsToSend); + printf("\r%5.5d messages sent", 0); + for(i = 0 ; i < numMsgsToSend ; ++i) { + if(i < numConnections) + socknum = i; + else if(i >= numMsgsToSend - numConnections) + socknum = i - (numMsgsToSend - numConnections); + else + socknum = rand() % numConnections; + lenBuf = sprintf(buf, "<167>Mar 1 01:00:00 172.20.245.8 tag msgnum:%8.8d:\n", msgNum); + lenSend = send(sockArray[socknum], buf, lenBuf, 0); + if(lenSend != lenBuf) { + printf("\r%5.5d\n", i); + fflush(stdout); + perror("send test data"); + printf("send() failed at socket %d, index %d, msgNum %d\n", socknum, i, msgNum); + fflush(stderr); + return(1); + } + if(i % 100 == 0) { + printf("\r%5.5d", i); + } + ++msgNum; + } + printf("\r%5.5d messages sent\n", i); + + return 0; +} + + +/* send a message via TCP + * We open the connection on the initial send, and never close it + * (let the OS do that). If a conneciton breaks, we do NOT try to + * recover, so all test after that one will fail (and the test + * driver probably hang. returns 0 if ok, something else otherwise. + * We use traditional framing '\n' at EOR for this tester. It may be + * worth considering additional framing modes. + * rgerhards, 2009-04-08 + */ +int +tcpSend(char *buf, int lenBuf) +{ + static int sock = INVALID_SOCKET; + struct sockaddr_in addr; + + if(sock == INVALID_SOCKET) { + /* first time, need to connect to target */ + if((sock=socket(AF_INET, SOCK_STREAM, 0))==-1) { + perror("socket()"); + return(1); + } + + memset((char *) &addr, 0, sizeof(addr)); + addr.sin_family = AF_INET; + addr.sin_port = htons(13514); + if(inet_aton("127.0.0.1", &addr.sin_addr)==0) { + fprintf(stderr, "inet_aton() failed\n"); + return(1); + } + if(connect(sock, (struct sockaddr*)&addr, sizeof(addr)) != 0) { + fprintf(stderr, "connect() failed\n"); + return(1); + } + } + + /* send test data */ + if(send(sock, buf, lenBuf, 0) != lenBuf) { + perror("send test data"); + fprintf(stderr, "send() failed\n"); + return(1); + } + + /* send record terminator */ + if(send(sock, "\n", 1, 0) != 1) { + perror("send record terminator"); + fprintf(stderr, "send() failed\n"); + return(1); + } + + return 0; +} + + +/* Run the test suite. This must be called with exactly one parameter, the + * name of the test suite. For details, see file header comment at the top + * of this file. + * rgerhards, 2009-04-03 + */ +int main(int argc, char *argv[]) +{ + int ret = 0; + struct sigaction sigAct; + static char buf[1024]; + + /* on Solaris, we do not HAVE MSG_NOSIGNAL, so for this reason + * we block SIGPIPE (not an issue for this program) + */ + memset(&sigAct, 0, sizeof(sigAct)); + sigemptyset(&sigAct.sa_mask); + sigAct.sa_handler = SIG_IGN; + sigaction(SIGPIPE, &sigAct, NULL); + + setvbuf(stdout, buf, _IONBF, 48); + + if(argc != 5 && argc != 6) { + printf("Invalid call of tcpflood\n"); + printf("Usage: tcpflood target-host target-port num-connections num-messages [initial msgnum]\n"); + exit(1); + } + + targetIP = argv[1]; + targetPort = atoi(argv[2]); + numConnections = atoi(argv[3]); + numMsgsToSend = atoi(argv[4]); + if(argc == 6) + msgNum = atoi(argv[5]); + + if(openConnections() != 0) { + printf("error opening connections\n"); + exit(1); + } + + if(sendMessages() != 0) { + printf("error sending messages\n"); + exit(1); + } + + //closeConnections(); + printf("End of tcpflood Run\n"); + + exit(ret); +} diff --git a/tests/testsuites/1.field1 b/tests/testsuites/1.field1 new file mode 100644 index 00000000..54751171 --- /dev/null +++ b/tests/testsuites/1.field1 @@ -0,0 +1,3 @@ +<167>Mar 6 16:57:54 172.20.245.8 %PIX-7-710005: DROP_url_www.sina.com.cn:IN=eth1 OUT=eth0 SRC=192.168.10.78 DST=61.172.201.194 LEN=1182 TOS=0x00 PREC=0x00 TTL=63 ID=14368 DF PROTO=TCP SPT=33343 DPT=80 WINDOW=92 RES=0x00 ACK PSH URGP=0 +DROP_url_www.sina.com.cn:IN=eth1 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/1.inputname_imtcp_12514 b/tests/testsuites/1.inputname_imtcp_12514 new file mode 100644 index 00000000..178b1724 --- /dev/null +++ b/tests/testsuites/1.inputname_imtcp_12514 @@ -0,0 +1,3 @@ +<167>Mar 6 16:57:54 172.20.245.8 %PIX-7-710005: MSG +12514 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/1.inputname_imtcp_12515 b/tests/testsuites/1.inputname_imtcp_12515 new file mode 100644 index 00000000..d616098b --- /dev/null +++ b/tests/testsuites/1.inputname_imtcp_12515 @@ -0,0 +1,3 @@ +<167>Mar 6 16:57:54 172.20.245.8 %PIX-7-710005: MSG +12515 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/1.inputname_imtcp_12516 b/tests/testsuites/1.inputname_imtcp_12516 new file mode 100644 index 00000000..8e6997ce --- /dev/null +++ b/tests/testsuites/1.inputname_imtcp_12516 @@ -0,0 +1,3 @@ +<167>Mar 6 16:57:54 172.20.245.8 %PIX-7-710005: MSG +12516 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/1.omod-if-array b/tests/testsuites/1.omod-if-array new file mode 100644 index 00000000..c464b19c --- /dev/null +++ b/tests/testsuites/1.omod-if-array @@ -0,0 +1,2 @@ +<167>Mar 6 16:57:54 172.20.245.8 %PIX-7-710005: UDP request discarded from SERVER1/2741 to test_app:255.255.255.255/61601 +167,Mar 6 16:57:54,172.20.245.8,%PIX-7-710005,%PIX-7-710005:, diff --git a/tests/testsuites/1.parse1 b/tests/testsuites/1.parse1 new file mode 100644 index 00000000..5ae655e6 --- /dev/null +++ b/tests/testsuites/1.parse1 @@ -0,0 +1,3 @@ +<167>Mar 6 16:57:54 172.20.245.8 %PIX-7-710005: UDP request discarded from SERVER1/2741 to test_app:255.255.255.255/61601 +167,local4,debug,Mar 6 16:57:54,172.20.245.8,%PIX-7-710005,%PIX-7-710005:, UDP request discarded from SERVER1/2741 to test_app:255.255.255.255/61601 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/2.parse1 b/tests/testsuites/2.parse1 new file mode 100644 index 00000000..628e06df --- /dev/null +++ b/tests/testsuites/2.parse1 @@ -0,0 +1,3 @@ +<38>Mar 27 19:06:53 source_server sshd(pam_unix)[12750]: session opened for user foo by (uid=0) +38,auth,info,Mar 27 19:06:53,source_server,sshd(pam_unix),sshd(pam_unix)[12750]:, session opened for user foo by (uid=0) +# yet another real-life sample where we had some issues with diff --git a/tests/testsuites/3.parse1 b/tests/testsuites/3.parse1 new file mode 100644 index 00000000..a6b4e884 --- /dev/null +++ b/tests/testsuites/3.parse1 @@ -0,0 +1,3 @@ +<38>Apr 6 15:07:10 lxcvs07 sshd(pam_unix)[31738]: session closed for user cvsadmin +38,auth,info,Apr 6 15:07:10,lxcvs07,sshd(pam_unix),sshd(pam_unix)[31738]:, session closed for user cvsadmin +# yet another real-life sample where we had some issues with diff --git a/tests/testsuites/date1.parse1 b/tests/testsuites/date1.parse1 new file mode 100644 index 00000000..ffc7c373 --- /dev/null +++ b/tests/testsuites/date1.parse1 @@ -0,0 +1,3 @@ +<38> Mar 7 19:06:53 example tag: testmessage (only date actually tested) +38,auth,info,Mar 7 19:06:53,example,tag,tag:, testmessage (only date actually tested) +# one space in front of the date diff --git a/tests/testsuites/date2.parse1 b/tests/testsuites/date2.parse1 new file mode 100644 index 00000000..8d587d9d --- /dev/null +++ b/tests/testsuites/date2.parse1 @@ -0,0 +1,3 @@ +<38>Mar 7 19:06:53 example tag: testmessage (only date actually tested) +38,auth,info,Mar 7 19:06:53,example,tag,tag:, testmessage (only date actually tested) +# only one space between "Mar" and "7" diff --git a/tests/testsuites/date3.parse1 b/tests/testsuites/date3.parse1 new file mode 100644 index 00000000..940d261e --- /dev/null +++ b/tests/testsuites/date3.parse1 @@ -0,0 +1,3 @@ +<38>Mar 7 2008 19:06:53: example tag: testmessage (only date actually tested) +38,auth,info,Mar 7 19:06:53,example,tag,tag:, testmessage (only date actually tested) +# the year should not be there, nor the colon after the date, but we accept it... diff --git a/tests/testsuites/date4.parse1 b/tests/testsuites/date4.parse1 new file mode 100644 index 00000000..eee5fb09 --- /dev/null +++ b/tests/testsuites/date4.parse1 @@ -0,0 +1,3 @@ +<38>Mar 7 2008 19:06:53 example tag: testmessage (only date actually tested) +38,auth,info,Mar 7 19:06:53,example,tag,tag:, testmessage (only date actually tested) +# the year should not be there, but we accept it... diff --git a/tests/testsuites/date5.parse1 b/tests/testsuites/date5.parse1 new file mode 100644 index 00000000..be32e605 --- /dev/null +++ b/tests/testsuites/date5.parse1 @@ -0,0 +1,3 @@ +<38>Mar 7 19:06:53: example tag: testmessage (only date actually tested) +38,auth,info,Mar 7 19:06:53,example,tag,tag:, testmessage (only date actually tested) +# colon after timestamp is strictly not ok, but we accept it diff --git a/tests/testsuites/diag-common.conf b/tests/testsuites/diag-common.conf new file mode 100644 index 00000000..9e9e28fe --- /dev/null +++ b/tests/testsuites/diag-common.conf @@ -0,0 +1,16 @@ +# This is a config include file. It sets up rsyslog so that the +# diag system can successfully be used. Also, it generates a file +# "rsyslogd.started" after rsyslogd is initialized. This config file +# should be included in all tests that intend to use common code for +# controlling the daemon. +# NOTE: we assume that rsyslogd's current working directory is +# ./tests (or the distcheck equivalent), in particlular that this +# config file resides in the testsuites subdirectory. +# rgerhards, 2009-05-27 +$ModLoad ../plugins/imdiag/.libs/imdiag +$IMDiagServerRun 13500 + +$template startupfile,"rsyslogd.started" # trick to use relative path names! +:syslogtag, contains, "rsyslogd" ?startupfile + +$ErrorMessagesToStderr off diff --git a/tests/testsuites/diskqueue.conf b/tests/testsuites/diskqueue.conf new file mode 100644 index 00000000..a992c5a5 --- /dev/null +++ b/tests/testsuites/diskqueue.conf @@ -0,0 +1,16 @@ +# Test for queue disk mode (see .sh file for details) +# rgerhards, 2009-04-17 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +# set spool locations and switch queue to disk-only mode +$WorkDirectory test-spool +$MainMsgQueueFilename mainq +$MainMsgQueueType disk + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/field1.conf b/tests/testsuites/field1.conf new file mode 100644 index 00000000..1ff833dd --- /dev/null +++ b/tests/testsuites/field1.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format that we can easily parse in expect +$template fmt,"%msg:F,32:2%\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/imtcp-multiport.conf b/tests/testsuites/imtcp-multiport.conf new file mode 100644 index 00000000..ccdc15fb --- /dev/null +++ b/tests/testsuites/imtcp-multiport.conf @@ -0,0 +1,13 @@ +# Test for queue disk mode (see .sh file for details) +# rgerhards, 2009-05-22 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 +$InputTCPServerRun 13515 +$InputTCPServerRun 13516 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/inputname_imtcp.conf b/tests/testsuites/inputname_imtcp.conf new file mode 100644 index 00000000..a25eab37 --- /dev/null +++ b/tests/testsuites/inputname_imtcp.conf @@ -0,0 +1,19 @@ +# This is a special case, thus we define the inputs ourselfs +$ModLoad ../plugins/omstdout/.libs/omstdout + +$ModLoad ../plugins/imtcp/.libs/imtcp + +$InputTCPServerInputname 12514 +$InputTCPServerRun 12514 + +$InputTCPServerInputname 12515 +$InputTCPServerRun 12515 + +$InputTCPServerInputname 12516 +$InputTCPServerRun 12516 + +$ErrorMessagesToStderr off + +# use a special format that we can easily parse in expect +$template fmt,"%inputname%\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/manytcp.conf b/tests/testsuites/manytcp.conf new file mode 100644 index 00000000..eb9db257 --- /dev/null +++ b/tests/testsuites/manytcp.conf @@ -0,0 +1,13 @@ +# Test for tcp "flood" testing +# rgerhards, 2009-04-08 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$MaxOpenFiles 2000 +$InputTCPMaxSessions 1100 +$InputTCPServerRun 13514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/omod-if-array.conf b/tests/testsuites/omod-if-array.conf new file mode 100644 index 00000000..d88db166 --- /dev/null +++ b/tests/testsuites/omod-if-array.conf @@ -0,0 +1,13 @@ +# Test config for array-passing output module interface +# (stanard string passing is already tested via the other test inside +# the testbench, so we do not need to focus on that) +# rgerhards, 2009-04-03 +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ActionOMStdoutArrayInterface on +$ErrorMessagesToStderr off + +# do NOT remove \n, that would hang the test driver! +$template expect,"%PRI%%timestamp%%hostname%%programname%%syslogtag%\n" +*.* :omstdout:;expect diff --git a/tests/testsuites/parse1.conf b/tests/testsuites/parse1.conf new file mode 100644 index 00000000..947a05a8 --- /dev/null +++ b/tests/testsuites/parse1.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format that we can easily parse in expect +$template expect,"%PRI%,%syslogfacility-text%,%syslogseverity-text%,%timestamp%,%hostname%,%programname%,%syslogtag%,%msg%\n" +*.* :omstdout:;expect diff --git a/tests/testsuites/queue-persist.conf b/tests/testsuites/queue-persist.conf new file mode 100644 index 00000000..8903042d --- /dev/null +++ b/tests/testsuites/queue-persist.conf @@ -0,0 +1,21 @@ +# Test for persisting messages on shutdown +# rgerhards, 2009-04-17 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 1 +$MainMsgQueueSaveOnShutdown on +$InputTCPServerRun 13514 + +$ModLoad ../plugins/omtesting/.libs/omtesting + +# set spool locations and switch queue to disk-only mode +$WorkDirectory test-spool +$MainMsgQueueFilename mainq +$IncludeConfig work-queuemode.conf + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt + +$IncludeConfig work-delay.conf diff --git a/tests/testsuites/rfc3164.parse1 b/tests/testsuites/rfc3164.parse1 new file mode 100644 index 00000000..e7a5fa18 --- /dev/null +++ b/tests/testsuites/rfc3164.parse1 @@ -0,0 +1,4 @@ +<34>Oct 11 22:14:15 mymachine su: 'su root' failed for lonvick on /dev/pts/8 +34,auth,crit,Oct 11 22:14:15,mymachine,su,su:, 'su root' failed for lonvick on /dev/pts/8 +#Example from RFC3164, section 5.4 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/rfc5424-1.parse1 b/tests/testsuites/rfc5424-1.parse1 new file mode 100644 index 00000000..23836c9f --- /dev/null +++ b/tests/testsuites/rfc5424-1.parse1 @@ -0,0 +1,3 @@ +#Example from RFC5424, section 6.5 / sample 1 +<34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 - BOM'su root' failed for lonvick on /dev/pts/8 +34,auth,crit,Oct 11 22:14:15,mymachine.example.com,,su,- BOM'su root' failed for lonvick on /dev/pts/8 diff --git a/tests/testsuites/rfc5424-2.parse1 b/tests/testsuites/rfc5424-2.parse1 new file mode 100644 index 00000000..a86fbc35 --- /dev/null +++ b/tests/testsuites/rfc5424-2.parse1 @@ -0,0 +1,4 @@ +<165>1 2003-08-24T05:14:15.000003-07:00 192.0.2.1 myproc 8710 - - %% It's time to make the do-nuts. +165,local4,notice,Aug 24 05:14:15,192.0.2.1,,myproc[8710],- %% It's time to make the do-nuts. +#Example from RFC5424, section 6.5 / sample 2 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/rfc5424-3.parse1 b/tests/testsuites/rfc5424-3.parse1 new file mode 100644 index 00000000..6ad4073d --- /dev/null +++ b/tests/testsuites/rfc5424-3.parse1 @@ -0,0 +1,4 @@ +<165>1 2003-10-11T22:14:15.003Z mymachine.example.com evntslog - ID47 [exampleSDID@32473 iut="3" eventSource= "Application" eventID="1011"][examplePriority@32473 class="high"] +165,local4,notice,Oct 11 22:14:15,mymachine.example.com,,evntslog, +#Example from RFC5424, section 6.5 / sample 4 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/rfc5424-4.parse1 b/tests/testsuites/rfc5424-4.parse1 new file mode 100644 index 00000000..ecf27e14 --- /dev/null +++ b/tests/testsuites/rfc5424-4.parse1 @@ -0,0 +1,4 @@ +<165>1 2003-10-11T22:14:15.003Z mymachine.example.com evntslog - ID47 [exampleSDID@32473 iut="3" eventSource= "Application" eventID="1011"] BOMAn application event log entry... +165,local4,notice,Oct 11 22:14:15,mymachine.example.com,,evntslog,BOMAn application event log entry... +#Example from RFC5424, section 6.5 / sample 3 +#Only the first two lines are important, you may place anything behind them! @@ -127,7 +127,7 @@ static void* thrdStarter(void *arg) assert(pThis != NULL); assert(pThis->pUsrThrdMain != NULL); - /* block all signalsi */ + /* block all signals */ sigset_t sigSet; sigfillset(&sigSet); pthread_sigmask(SIG_BLOCK, &sigSet, NULL); diff --git a/tools/Makefile.am b/tools/Makefile.am index 582ad9e3..e523b854 100644 --- a/tools/Makefile.am +++ b/tools/Makefile.am @@ -22,12 +22,13 @@ rsyslogd_SOURCES = \ \ ../dirty.h rsyslogd_CPPFLAGS = $(PTHREADS_CFLAGS) $(RSRT_CFLAGS) -rsyslogd_LDADD = $(ZLIB_LIBS) $(PTHREADS_LIBS) $(RSRT_LIBS) +rsyslogd_LDADD = $(ZLIB_LIBS) $(PTHREADS_LIBS) $(RSRT_LIBS) $(SOL_LIBS) rsyslogd_LDFLAGS = -export-dynamic if ENABLE_DIAGTOOLS -sbin_PROGRAMS += rsyslog_diag_hostname +sbin_PROGRAMS += rsyslog_diag_hostname msggen rsyslog_diag_hostname_SOURCES = gethostn.c +msggen_SOURCES = msggen.c endif EXTRA_DIST = $(man_MANS) diff --git a/tools/msggen.c b/tools/msggen.c new file mode 100644 index 00000000..06244c18 --- /dev/null +++ b/tools/msggen.c @@ -0,0 +1,38 @@ +/* msggen - a small diagnostic utility that does very quick + * syslog() calls. + * + * Copyright 2008 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of rsyslog. + * + * Rsyslog is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Rsyslog is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. + * + * A copy of the GPL can be found in the file "COPYING" in this distribution. + */ + +#include <stdio.h> +#include <syslog.h> + +int main(int __attribute__((unused)) argc, char __attribute__((unused)) *argv[]) +{ + int i; + + openlog("msggen", 0 , LOG_LOCAL0); + + for(i = 0 ; i < 10 ; ++i) + syslog(LOG_NOTICE, "This is message number %d", i); + + closelog(); + return 0; +} diff --git a/tools/omfile.c b/tools/omfile.c index fb83632a..3e845a73 100644 --- a/tools/omfile.c +++ b/tools/omfile.c @@ -44,6 +44,10 @@ #include <unistd.h> #include <sys/file.h> +#ifdef OS_SOLARIS +# include <fcntl.h> +#endif + #include "syslogd.h" #include "syslogd-types.h" #include "srUtils.h" @@ -174,7 +178,7 @@ rsRetVal setDynaFileCacheSize(void __attribute__((unused)) *pVal, int iNewVal) } iDynaFileCacheSize = iNewVal; - dbgprintf("DynaFileCacheSize changed to %d.\n", iNewVal); + DBGPRINTF("DynaFileCacheSize changed to %d.\n", iNewVal); RETiRet; } @@ -244,7 +248,6 @@ static rsRetVal cflineParseOutchannel(instanceData *pData, uchar* p, omodStringR */ pData->f_sizeLimitCmd = (char*) pOch->cmdOnSizeLimit; -RUNLOG_VAR("%p", pszTplName); iRet = cflineParseTemplateName(&p, pOMSR, iEntry, iTplOpts, (pszTplName == NULL) ? (uchar*)"RSYSLOG_FileFormat" : pszTplName); @@ -298,7 +301,7 @@ int resolveFileSizeLimit(instanceData *pData) free(pCmd); - pData->fd = open((char*) pData->f_fname, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY, + pData->fd = open((char*) pData->f_fname, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY|O_CLOEXEC, pData->fCreateMode); actualFileSize = lseek(pData->fd, 0, SEEK_END); @@ -327,7 +330,7 @@ static void dynaFileDelCacheEntry(dynaFileCacheEntry **pCache, int iEntry, int b if(pCache[iEntry] == NULL) FINALIZE; - dbgprintf("Removed entry %d for file '%s' from dynaCache.\n", iEntry, + DBGPRINTF("Removed entry %d for file '%s' from dynaCache.\n", iEntry, pCache[iEntry]->pName == NULL ? "[OPEN FAILED]" : (char*)pCache[iEntry]->pName); /* if the name is NULL, this is an improperly initilized entry which * needs to be discarded. In this case, neither the file is to be closed @@ -349,9 +352,11 @@ finalize_it: } -/* This function frees the dynamic file name cache. +/* This function frees all dynamic file name cache entries and closes the + * relevant files. Part of Shutdown and HUP processing. + * rgerhards, 2008-10-23 */ -static void dynaFileFreeCache(instanceData *pData) +static inline void dynaFileFreeCacheEntries(instanceData *pData) { register int i; ASSERT(pData != NULL); @@ -360,46 +365,67 @@ static void dynaFileFreeCache(instanceData *pData) for(i = 0 ; i < pData->iCurrCacheSize ; ++i) { dynaFileDelCacheEntry(pData->dynCache, i, 1); } + ENDfunc; +} + + +/* This function frees the dynamic file name cache. + */ +static void dynaFileFreeCache(instanceData *pData) +{ + ASSERT(pData != NULL); + BEGINfunc; + dynaFileFreeCacheEntries(pData); if(pData->dynCache != NULL) d_free(pData->dynCache); ENDfunc; } -/* This is a shared code for both static and dynamic files. +/* This is now shared code for all types of files. It simply prepares + * file access, which, among others, means the the file wil be opened + * and any directories in between will be created (based on config, of + * course). -- rgerhards, 2008-10-22 + * changed to iRet interface - 2009-03-19 */ -static void prepareFile(instanceData *pData, uchar *newFileName) +static rsRetVal +prepareFile(instanceData *pData, uchar *newFileName) { + DEFiRet; + if(pData->fileType == eTypePIPE) { + pData->fd = open((char*) pData->f_fname, O_RDWR|O_NONBLOCK|O_CLOEXEC); + FINALIZE; /* we are done in this case */ + } + if(access((char*)newFileName, F_OK) == 0) { /* file already exists */ - pData->fd = open((char*) newFileName, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY, + pData->fd = open((char*) newFileName, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY|O_CLOEXEC, pData->fCreateMode); } else { pData->fd = -1; /* file does not exist, create it (and eventually parent directories */ if(pData->bCreateDirs) { - /* we fist need to create parent dirs if they are missing + /* We first need to create parent dirs if they are missing. * We do not report any errors here ourselfs but let the code * fall through to error handler below. */ if(makeFileParentDirs(newFileName, strlen((char*)newFileName), pData->fDirCreateMode, pData->dirUID, pData->dirGID, pData->bFailOnChown) != 0) { - return; /* we give up */ + ABORT_FINALIZE(RS_RET_ERR); /* we give up */ } } /* no matter if we needed to create directories or not, we now try to create * the file. -- rgerhards, 2008-12-18 (based on patch from William Tisater) */ - pData->fd = open((char*) newFileName, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY, + pData->fd = open((char*) newFileName, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY|O_CLOEXEC, pData->fCreateMode); if(pData->fd != -1) { /* check and set uid/gid */ if(pData->fileUID != (uid_t)-1 || pData->fileGID != (gid_t) -1) { /* we need to set owner/group */ - if(fchown(pData->fd, pData->fileUID, - pData->fileGID) != 0) { + if(fchown(pData->fd, pData->fileUID, pData->fileGID) != 0) { if(pData->bFailOnChown) { int eSave = errno; close(pData->fd); @@ -413,6 +439,18 @@ static void prepareFile(instanceData *pData, uchar *newFileName) } } } +finalize_it: + /* this was "pData->fd != 0", which I think was a bug. I guess 0 was intended to mean + * non-open file descriptor. Anyhow, I leave this comment for the time being to that if + * problems surface, one at least knows what happened. -- rgerhards, 2009-03-19 + */ + if(pData->fd != -1 && isatty(pData->fd)) { + DBGPRINTF("file %d is a tty file\n", pData->fd); + pData->fileType = eTypeTTY; + untty(); + } + + RETiRet; } @@ -431,6 +469,8 @@ static int prepareDynFile(instanceData *pData, uchar *newFileName, unsigned iMsg int i; int iFirstFree; dynaFileCacheEntry **pCache; + + BEGINfunc ASSERT(pData != NULL); ASSERT(newFileName != NULL); @@ -486,13 +526,13 @@ static int prepareDynFile(instanceData *pData, uchar *newFileName, unsigned iMsg /* we need to allocate memory for the cache structure */ pCache[iFirstFree] = (dynaFileCacheEntry*) calloc(1, sizeof(dynaFileCacheEntry)); if(pCache[iFirstFree] == NULL) { - dbgprintf("prepareDynfile(): could not alloc mem, discarding this request\n"); + DBGPRINTF("prepareDynfile(): could not alloc mem, discarding this request\n"); return -1; } } /* Ok, we finally can open the file */ - prepareFile(pData, newFileName); + prepareFile(pData, newFileName); /* ignore exact error, we check fd below */ /* file is either open now or an error state set */ if(pData->fd == -1) { @@ -500,10 +540,11 @@ static int prepareDynFile(instanceData *pData, uchar *newFileName, unsigned iMsg * message. Otherwise, we could run into a never-ending loop. The bad * news is that we also lose errors on startup messages, but so it is. */ - if(iMsgOpts & INTERNAL_MSG) - dbgprintf("Could not open dynaFile, discarding message\n"); - else + if(iMsgOpts & INTERNAL_MSG) { + DBGPRINTF("Could not open dynaFile, discarding message\n"); + } else { errmsg.LogError(0, NO_ERRCODE, "Could not open dynamic file '%s' - discarding message", (char*)newFileName); + } dynaFileDelCacheEntry(pCache, iFirstFree, 1); pData->iCurrElt = -1; return -1; @@ -513,8 +554,9 @@ static int prepareDynFile(instanceData *pData, uchar *newFileName, unsigned iMsg pCache[iFirstFree]->pName = (uchar*)strdup((char*)newFileName); /* TODO: check for NULL (very unlikely) */ pCache[iFirstFree]->lastUsed = time(NULL); pData->iCurrElt = iFirstFree; - dbgprintf("Added new entry %d for file cache, file '%s'.\n", - iFirstFree, newFileName); + DBGPRINTF("Added new entry %d for file cache, file '%s'.\n", iFirstFree, newFileName); + + ENDfunc return 0; } @@ -527,6 +569,7 @@ static int prepareDynFile(instanceData *pData, uchar *newFileName, unsigned iMsg static rsRetVal writeFile(uchar **ppString, unsigned iMsgOpts, instanceData *pData) { off_t actualFileSize; + int iLenWritten; DEFiRet; ASSERT(pData != NULL); @@ -536,7 +579,14 @@ static rsRetVal writeFile(uchar **ppString, unsigned iMsgOpts, instanceData *pDa */ if(pData->bDynamicName) { if(prepareDynFile(pData, ppString[1], iMsgOpts) != 0) - ABORT_FINALIZE(RS_RET_ERR); + ABORT_FINALIZE(RS_RET_SUSPENDED); /* whatever the failure was, we need to retry */ + } + + if(pData->fd == -1) { + rsRetVal iRetLocal; + iRetLocal = prepareFile(pData, pData->f_fname); + if((iRetLocal != RS_RET_OK) || (pData->fd == -1)) + ABORT_FINALIZE(RS_RET_SUSPENDED); /* whatever the failure was, we need to retry */ } /* create the message based on format specified */ @@ -572,42 +622,47 @@ again: } } - if (write(pData->fd, ppString[0], strlen((char*)ppString[0])) < 0) { + iLenWritten = write(pData->fd, ppString[0], strlen((char*)ppString[0])); +//dbgprintf("lenwritten: %d\n", iLenWritten); + if(iLenWritten < 0) { int e = errno; + char errStr[1024]; + rs_strerror_r(errno, errStr, sizeof(errStr)); + DBGPRINTF("log file (%d) write error %d: %s\n", pData->fd, e, errStr); - /* If a named pipe is full, just ignore it for now - - mrn 24 May 96 */ - if (pData->fileType == eTypePIPE && e == EAGAIN) - ABORT_FINALIZE(RS_RET_OK); - - /* If the filesystem is filled up, just ignore - * it for now and continue writing when possible - * based on patch for sysklogd by Martin Schulze on 2007-05-24 - */ - if (pData->fileType == eTypeFILE && e == ENOSPC) - ABORT_FINALIZE(RS_RET_OK); + /* If a named pipe is full, we suspend this action for a while */ + if(pData->fileType == eTypePIPE && e == EAGAIN) + ABORT_FINALIZE(RS_RET_SUSPENDED); - (void) close(pData->fd); - /* - * Check for EBADF on TTY's due to vhangup() + close(pData->fd); + pData->fd = -1; /* tell that fd is no longer open! */ + if(pData->bDynamicName && pData->iCurrElt != -1) { + /* in this case, we need to invalidate the name in the cache, too + * otherwise, an invalid fd may show up if we had a file name change. + * rgerhards, 2009-03-19 + */ + pData->dynCache[pData->iCurrElt]->fd = -1; + } + /* Check for EBADF on TTY's due to vhangup() * Linux uses EIO instead (mrn 12 May 96) */ - if ((pData->fileType == eTypeTTY || pData->fileType == eTypeCONSOLE) + if((pData->fileType == eTypeTTY || pData->fileType == eTypeCONSOLE) #ifdef linux - && e == EIO) { + && e == EIO #else - && e == EBADF) { + && e == EBADF #endif - pData->fd = open((char*) pData->f_fname, O_WRONLY|O_APPEND|O_NOCTTY); + ) { + pData->fd = open((char*) pData->f_fname, O_WRONLY|O_APPEND|O_NOCTTY|O_CLOEXEC); if (pData->fd < 0) { - iRet = RS_RET_DISABLE_ACTION; + iRet = RS_RET_SUSPENDED; errmsg.LogError(0, NO_ERRCODE, "%s", pData->f_fname); } else { untty(); goto again; } } else { - iRet = RS_RET_DISABLE_ACTION; + iRet = RS_RET_SUSPENDED; errno = e; errmsg.LogError(0, NO_ERRCODE, "%s", pData->f_fname); } @@ -641,13 +696,8 @@ ENDtryResume BEGINdoAction CODESTARTdoAction - dbgprintf(" (%s)\n", pData->f_fname); - /* pData->fd == -1 is an indicator that the we couldn't - * open the file at startup. For dynaFiles, this is ok, - * all others are doomed. - */ - if(pData->bDynamicName || (pData->fd != -1)) - iRet = writeFile(ppString, iMsgOpts, pData); + DBGPRINTF(" (%s)\n", pData->f_fname); + iRet = writeFile(ppString, iMsgOpts, pData); ENDdoAction @@ -675,7 +725,6 @@ CODESTARTparseSelectorAct } else { pData->bSyncFile = bEnableSync ? 1 : 0; } - pData->f_sizeLimit = 0; /* default value, use outchannels to configure! */ switch (*p) @@ -693,7 +742,7 @@ CODESTARTparseSelectorAct pData->bDynamicName = 0; pData->fCreateMode = fCreateMode; /* preserve current setting */ pData->fDirCreateMode = fDirCreateMode; /* preserve current setting */ - pData->fd = open((char*) pData->f_fname, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY, + pData->fd = open((char*) pData->f_fname, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY|O_CLOEXEC, pData->fCreateMode); } break; @@ -730,7 +779,7 @@ CODESTARTparseSelectorAct if((pData->dynCache = (dynaFileCacheEntry**) calloc(iDynaFileCacheSize, sizeof(dynaFileCacheEntry*))) == NULL) { iRet = RS_RET_OUT_OF_MEMORY; - dbgprintf("Could not allocate memory for dynaFileCache - selector disabled.\n"); + DBGPRINTF("Could not allocate memory for dynaFileCache - selector disabled.\n"); } break; @@ -764,23 +813,18 @@ CODESTARTparseSelectorAct pData->dirUID = dirUID; pData->dirGID = dirGID; - if(pData->fileType == eTypePIPE) { - pData->fd = open((char*) pData->f_fname, O_RDWR|O_NONBLOCK); - } else { - prepareFile(pData, pData->f_fname); - } + /* at this stage, we ignore the return value of prepareFile, this is taken + * care of in later steps. -- rgerhards, 2009-03-19 + */ + prepareFile(pData, pData->f_fname); - if ( pData->fd < 0 ){ + if(pData->fd < 0 ) { pData->fd = -1; - dbgprintf("Error opening log file: %s\n", pData->f_fname); - errmsg.LogError(0, NO_ERRCODE, "%s", pData->f_fname); + DBGPRINTF("Error opening log file: %s\n", pData->f_fname); + errmsg.LogError(0, RS_RET_NO_FILE_ACCESS, "Could no open output file '%s'", pData->f_fname); break; } - if (isatty(pData->fd)) { - pData->fileType = eTypeTTY; - untty(); - } - if (strcmp((char*) p, _PATH_CONSOLE) == 0) + if(strcmp((char*) p, _PATH_CONSOLE) == 0) pData->fileType = eTypeCONSOLE; break; default: @@ -815,6 +859,20 @@ static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __a } +BEGINdoHUP +CODESTARTdoHUP + if(pData->bDynamicName) { + dynaFileFreeCacheEntries(pData); + pData->iCurrElt = -1; /* invalidate current element */ + } else { + if(pData->fd != -1) { + close(pData->fd); + pData->fd = -1; + } + } +ENDdoHUP + + BEGINmodExit CODESTARTmodExit if(pszTplName != NULL) @@ -825,6 +883,7 @@ ENDmodExit BEGINqueryEtryPt CODESTARTqueryEtryPt CODEqueryEtryPt_STD_OMOD_QUERIES +CODEqueryEtryPt_doHUP ENDqueryEtryPt diff --git a/tools/omfwd.c b/tools/omfwd.c index eb023344..97703c79 100644 --- a/tools/omfwd.c +++ b/tools/omfwd.c @@ -82,12 +82,14 @@ typedef struct _instanceData { permittedPeers_t *pPermPeers; int iStrmDrvrMode; char *f_hname; - int *pSockArray; /* sockets to use for UDP */ + int *pSockArray; /* sockets to use for UDP */ int bIsConnected; /* are we connected to remote host? 0 - no, 1 - yes, UDP means addr resolved */ struct addrinfo *f_addr; - int compressionLevel; /* 0 - no compression, else level for zlib */ + int compressionLevel; /* 0 - no compression, else level for zlib */ char *port; int protocol; + int iUDPRebindInterval; /* rebind interval */ + int nXmit; /* number of transmissions since last (re-)bind */ # define FORW_UDP 0 # define FORW_TCP 1 /* following fields for TCP-based delivery */ @@ -100,9 +102,31 @@ static uchar *pszStrmDrvr = NULL; /* name of the stream driver to use */ static short iStrmDrvrMode = 0; /* mode for stream driver, driver-dependent (0 mostly means plain tcp) */ static short bResendLastOnRecon = 0; /* should the last message be re-sent on a successful reconnect? */ static uchar *pszStrmDrvrAuthMode = NULL; /* authentication mode to use */ +static int iUDPRebindInterval = 0; /* support for automatic re-binding (load balancers!). 0 - no rebind */ static permittedPeers_t *pPermPeers = NULL; +static rsRetVal doTryResume(instanceData *pData); + +/* Close the UDP sockets. + * rgerhards, 2009-05-29 + */ +static rsRetVal +closeUDPSockets(instanceData *pData) +{ + DEFiRet; + assert(pData != NULL); + if(pData->pSockArray != NULL) { + net.closeUDPListenSockets(pData->pSockArray); + pData->pSockArray = NULL; + freeaddrinfo(pData->f_addr); + pData->f_addr = NULL; + } +pData->bIsConnected = 0; // TODO: remove this variable altogether + RETiRet; +} + + /* get the syslog forward port from selector_t. The passed in * struct must be one that is setup for forwarding. * rgerhards, 2007-06-28 @@ -148,30 +172,19 @@ ENDisCompatibleWithFeature BEGINfreeInstance CODESTARTfreeInstance - if(pData->f_addr != NULL) { /* TODO: is the check ok? */ - freeaddrinfo(pData->f_addr); - pData->f_addr = NULL; - } - if(pData->port != NULL) - free(pData->port); - /* final cleanup */ DestructTCPInstanceData(pData); - if(pData->pSockArray != NULL) - net.closeUDPListenSockets(pData->pSockArray); + closeUDPSockets(pData); if(pData->protocol == FORW_TCP) { tcpclt.Destruct(&pData->pTCPClt); } - if(pData->f_hname != NULL) - free(pData->f_hname); - if(pData->pszStrmDrvr != NULL) - free(pData->pszStrmDrvr); - if(pData->pszStrmDrvrAuthMode != NULL) - free(pData->pszStrmDrvrAuthMode); - if(pData->pPermPeers != NULL) - net.DestructPermittedPeers(&pData->pPermPeers); + free(pData->port); + free(pData->f_hname); + free(pData->pszStrmDrvr); + free(pData->pszStrmDrvrAuthMode); + net.DestructPermittedPeers(&pData->pPermPeers); ENDfreeInstance @@ -192,6 +205,16 @@ static rsRetVal UDPSend(instanceData *pData, char *msg, size_t len) unsigned lsent = 0; int bSendSuccess; + if(pData->iUDPRebindInterval && (pData->nXmit++ % pData->iUDPRebindInterval == 0)) { + dbgprintf("omfwd dropping UDP 'connection' (as configured)\n"); + pData->nXmit = 1; /* else we have an addtl wrap at 2^31-1 */ + CHKiRet(closeUDPSockets(pData)); + } + + if(pData->pSockArray == NULL) { + CHKiRet(doTryResume(pData)); + } + if(pData->pSockArray != NULL) { /* we need to track if we have success sending to the remote * peer. Success is indicated by at least one sendto() call @@ -224,6 +247,7 @@ static rsRetVal UDPSend(instanceData *pData, char *msg, size_t len) } } +finalize_it: RETiRet; } @@ -615,7 +639,9 @@ CODE_STD_STRING_REQUESTparseSelectorAct(1) } else { CHKmalloc(pData->f_hname = strdup((char*) q)); } -dbgprintf("hostname '%s', port '%s'\n", pData->f_hname, pData->port); + + /* copy over config data as needed */ + pData->iUDPRebindInterval = iUDPRebindInterval; /* process template */ CHKiRet(cflineParseTemplateName(&p, *ppOMSR, 0, OMSR_NO_RQD_TPL_OPTS, @@ -700,6 +726,7 @@ static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __a /* we now must reset all non-string values */ iStrmDrvrMode = 0; bResendLastOnRecon = 0; + iUDPRebindInterval = 0; return RS_RET_OK; } @@ -714,6 +741,7 @@ CODEmodInit_QueryRegCFSLineHdlr CHKiRet(objUse(net,LM_NET_FILENAME)); CHKiRet(regCfSysLineHdlr((uchar *)"actionforwarddefaulttemplate", 0, eCmdHdlrGetWord, NULL, &pszTplName, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"actionsendudprebindinterval", 0, eCmdHdlrInt, NULL, &iUDPRebindInterval, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionsendstreamdriver", 0, eCmdHdlrGetWord, NULL, &pszStrmDrvr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionsendstreamdrivermode", 0, eCmdHdlrInt, NULL, &iStrmDrvrMode, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"actionsendstreamdriverauthmode", 0, eCmdHdlrGetWord, NULL, &pszStrmDrvrAuthMode, NULL)); diff --git a/tools/pidfile.c b/tools/pidfile.c index 2be13da6..e7744513 100644 --- a/tools/pidfile.c +++ b/tools/pidfile.c @@ -97,7 +97,7 @@ int write_pid (char *pidfile) int fd; int pid; - if ( ((fd = open(pidfile, O_RDWR|O_CREAT, 0644)) == -1) + if ( ((fd = open(pidfile, O_RDWR|O_CREAT|O_CLOEXEC, 0644)) == -1) || ((f = fdopen(fd, "r+")) == NULL) ) { fprintf(stderr, "Can't open or create %s.\n", pidfile); return 0; diff --git a/tools/syslogd.c b/tools/syslogd.c index 6f32b262..5f6b480f 100644 --- a/tools/syslogd.c +++ b/tools/syslogd.c @@ -72,16 +72,23 @@ #include <stdarg.h> #include <time.h> #include <assert.h> -#include <libgen.h> -#ifdef __sun +#ifdef OS_SOLARIS # include <errno.h> +# include <fcntl.h> +# include <stropts.h> +# include <sys/termios.h> +# include <sys/types.h> #else +# include <libgen.h> # include <sys/errno.h> #endif + #include <sys/ioctl.h> #include <sys/wait.h> #include <sys/file.h> +#include <sys/resource.h> +#include <grp.h> #if HAVE_SYS_TIMESPEC_H # include <sys/timespec.h> @@ -128,7 +135,9 @@ #include "vm.h" #include "errmsg.h" #include "datetime.h" +#include "parser.h" #include "sysvar.h" +#include "unicode-helper.h" /* definitions for objects we access */ DEFobjCurrIf(obj) @@ -219,7 +228,7 @@ static char *PidFile = _PATH_LOGPID; /* read-only after startup */ static pid_t myPid; /* our pid for use in self-generated messages, e.g. on startup */ /* mypid is read-only after the initial fork() */ -static int restart = 0; /* do restart (config read) - multithread safe */ +static int bHadHUP = 0; /* did we have a HUP? */ static int bParseHOSTNAMEandTAG = 1; /* global config var: should the hostname and tag be * parsed inside message - rgerhards, 2006-03-13 */ @@ -249,15 +258,15 @@ typedef struct legacyOptsLL_s { legacyOptsLL_t *pLegacyOptsLL = NULL; /* global variables for config file state */ -static int bDropTrailingLF = 1; /* drop trailing LF's on reception? */ +int bDropTrailingLF = 1; /* drop trailing LF's on reception? */ int iCompatibilityMode = 0; /* version we should be compatible with; 0 means sysklogd. It is the default, so if no -c<n> option is given, we make ourselvs as compatible to sysklogd as possible. */ static int bDebugPrintTemplateList = 1;/* output template list in debug mode? */ static int bDebugPrintCfSysLineHandlerList = 1;/* output cfsyslinehandler list in debug mode? */ static int bDebugPrintModuleList = 1;/* output module list in debug mode? */ -static uchar cCCEscapeChar = '\\';/* character to be used to start an escape sequence for control chars */ -static int bEscapeCCOnRcv = 1; /* escape control characters on reception: 0 - no, 1 - yes */ +uchar cCCEscapeChar = '\\';/* character to be used to start an escape sequence for control chars */ +int bEscapeCCOnRcv = 1; /* escape control characters on reception: 0 - no, 1 - yes */ static int bErrMsgToStderr = 1; /* print error messages to stderr (in addition to everything else)? */ int bReduceRepeatMsgs; /* reduce repeated message - 0 - no, 1 - yes */ int bActExecWhenPrevSusp; /* execute action only when previous one was suspended? */ @@ -271,11 +280,14 @@ static int bHaveMainQueue = 0;/* set to 1 if the main queue - in queueing mode - * If the main queue is either not yet ready or not running in * queueing mode (mode DIRECT!), then this is set to 0. */ +static int uidDropPriv = 0; /* user-id to which priveleges should be dropped to (AFTER init()!) */ +static int gidDropPriv = 0; /* group-id to which priveleges should be dropped to (AFTER init()!) */ extern int errno; +static uchar *pszConfDAGFile = NULL; /* name of config DAG file, non-NULL means generate one */ /* main message queue and its configuration parameters */ -static queue_t *pMsgQueue = NULL; /* the main message queue */ +static qqueue_t *pMsgQueue = NULL; /* the main message queue */ static int iMainMsgQueueSize = 10000; /* size of the main message queue above */ static int iMainMsgQHighWtrMark = 8000; /* high water mark for disk-assisted queues */ static int iMainMsgQLowWtrMark = 2000; /* low water mark for disk-assisted queues */ @@ -338,10 +350,8 @@ static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __a bDebugPrintModuleList = 1; bEscapeCCOnRcv = 1; /* default is to escape control characters */ bReduceRepeatMsgs = 0; - if(pszMainMsgQFName != NULL) { - free(pszMainMsgQFName); - pszMainMsgQFName = NULL; - } + free(pszMainMsgQFName); + pszMainMsgQFName = NULL; iMainMsgQueueSize = 10000; iMainMsgQHighWtrMark = 8000; iMainMsgQLowWtrMark = 2000; @@ -400,6 +410,26 @@ static int usage(void) } +/* ------------------------------ some support functions for imdiag ------------------------------ * + * This is a bit dirty, but the only way to do it, at least with reasonable effort. + * rgerhards, 2009-05-25 + */ + +/* return back the approximate current number of messages in the main message queue + */ +rsRetVal +diagGetMainMsgQSize(int *piSize) +{ + DEFiRet; + assert(piSize != NULL); + *piSize = pMsgQueue->iQueueSize; + RETiRet; +} + + +/* ------------------------------ end support functions for imdiag ------------------------------ */ + + /* function to destruct a selector_t object * rgerhards, 2007-08-01 */ @@ -420,6 +450,8 @@ selectorDestruct(void *pVal) rsCStrDestruct(&pThis->f_filterData.prop.pCSPropName); if(pThis->f_filterData.prop.pCSCompValue != NULL) rsCStrDestruct(&pThis->f_filterData.prop.pCSCompValue); + if(pThis->f_filterData.prop.regex_cache != NULL) + rsCStrRegexDestruct(&pThis->f_filterData.prop.regex_cache); } else if(pThis->f_filter_type == FILTER_EXPR) { if(pThis->f_filterData.f_expr != NULL) expr.Destruct(&pThis->f_filterData.f_expr); @@ -521,7 +553,7 @@ static char **crunch_list(char *list) #if 0 count=0; while (result[count]) - dbgprintf("#%d: %s\n", count, StripDomains[count++]); + DBGPRINTF("#%d: %s\n", count, StripDomains[count++]); #endif return result; } @@ -540,7 +572,7 @@ void untty(void) int i; if ( !Debug ) { - i = open(_PATH_TTY, O_RDWR); + i = open(_PATH_TTY, O_RDWR|O_CLOEXEC); if (i >= 0) { # if !defined(__hpux) (void) ioctl(i, (int) TIOCNOTTY, (char *)0); @@ -582,9 +614,18 @@ void untty(void) * Interface change: added new parameter "InputName", permits the input to provide * a string that identifies it. May be NULL, but must be a valid char* pointer if * non-NULL. + * + * rgerhards, 2008-10-06: + * Interface change: added new parameter "stTime", which enables the caller to provide + * a timestamp that is to be used as timegenerated instead of the current system time. + * This is meant to facilitate performance optimization. Some inputs support such modes. + * If stTime is NULL, the current system time is used. + * + * rgerhards, 2008-10-09: + * interface change: bParseHostname removed, now in flags */ -rsRetVal printline(uchar *hname, uchar *hnameIP, uchar *msg, int bParseHost, int flags, flowControl_t flowCtlType, - uchar *pszInputName) +static inline rsRetVal printline(uchar *hname, uchar *hnameIP, uchar *msg, int flags, flowControl_t flowCtlType, + uchar *pszInputName, struct syslogTime *stTime, time_t ttGenTime) { DEFiRet; register uchar *p; @@ -592,13 +633,16 @@ rsRetVal printline(uchar *hname, uchar *hnameIP, uchar *msg, int bParseHost, int msg_t *pMsg; /* Now it is time to create the message object (rgerhards) */ - CHKiRet(msgConstruct(&pMsg)); + if(stTime == NULL) { + CHKiRet(msgConstruct(&pMsg)); + } else { + CHKiRet(msgConstructWithTime(&pMsg, stTime, ttGenTime)); + } if(pszInputName != NULL) - MsgSetInputName(pMsg, (char*) pszInputName); + MsgSetInputName(pMsg, pszInputName, ustrlen(pszInputName)); MsgSetFlowControlType(pMsg, flowCtlType); MsgSetRawMsg(pMsg, (char*)msg); - pMsg->bParseHOSTNAME = bParseHost; /* test for special codes */ pri = DEFUPRI; p = msg; @@ -623,19 +667,12 @@ rsRetVal printline(uchar *hname, uchar *hnameIP, uchar *msg, int bParseHost, int * the message was received from (that, for obvious reasons, * being the local host). rgerhards 2004-11-16 */ - if(bParseHost == 0) - MsgSetHOSTNAME(pMsg, (char*)hname); - MsgSetRcvFrom(pMsg, (char*)hname); + if((pMsg->msgFlags & PARSE_HOSTNAME) == 0) + MsgSetHOSTNAME(pMsg, hname); + MsgSetRcvFrom(pMsg, hname); + MsgSetAfterPRIOffs(pMsg, p - msg); CHKiRet(MsgSetRcvFromIP(pMsg, hnameIP)); - /* rgerhards 2004-11-19: well, well... we've now seen that we - * have the "hostname problem" also with the traditional Unix - * message. As we like to emulate it, we need to add the hostname - * to it. - */ - if(MsgSetUxTradMsg(pMsg, (char*)p) != 0) - ABORT_FINALIZE(RS_RET_ERR); - logmsg(pMsg, flags); finalize_it: @@ -685,10 +722,19 @@ finalize_it: * Interface change: added new parameter "InputName", permits the input to provide * a string that identifies it. May be NULL, but must be a valid char* pointer if * non-NULL. + * + * rgerhards, 2008-10-06: + * Interface change: added new parameter "stTime", which enables the caller to provide + * a timestamp that is to be used as timegenerated instead of the current system time. + * This is meant to facilitate performance optimization. Some inputs support such modes. + * If stTime is NULL, the current system time is used. + * + * rgerhards, 2008-10-09: + * interface change: bParseHostname removed, now in flags */ rsRetVal -parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int bParseHost, int flags, flowControl_t flowCtlType, - uchar *pszInputName) +parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int flags, flowControl_t flowCtlType, + uchar *pszInputName, struct syslogTime *stTime, time_t ttGenTime) { DEFiRet; register int iMsg; @@ -715,9 +761,6 @@ parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int bPa * TODO: optimize buffer handling */ iMaxLine = glbl.GetMaxLine(); CHKmalloc(tmpline = malloc(sizeof(uchar) * (iMaxLine + 1))); -# ifdef USE_NETZIP - CHKmalloc(deflateBuf = malloc(sizeof(uchar) * (iMaxLine + 1))); -# endif /* we first check if we have a NUL character at the very end of the * message. This seems to be a frequent problem with a number of senders. @@ -730,7 +773,7 @@ parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int bPa * rgerhards, 2007-09-14 */ if(*(msg + len - 1) == '\0') { - dbgprintf("dropped NUL at very end of message\n"); + DBGPRINTF("dropped NUL at very end of message\n"); len--; } @@ -740,7 +783,7 @@ parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int bPa * turn on/off this handling. rgerhards, 2007-07-23 */ if(bDropTrailingLF && *(msg + len - 1) == '\n') { - dbgprintf("dropped LF at very end of message (DropTrailingLF is set)\n"); + DBGPRINTF("dropped LF at very end of message (DropTrailingLF is set)\n"); len--; } @@ -763,8 +806,9 @@ parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int bPa */ int ret; iLenDefBuf = iMaxLine; + CHKmalloc(deflateBuf = malloc(sizeof(uchar) * (iMaxLine + 1))); ret = uncompress((uchar *) deflateBuf, &iLenDefBuf, (uchar *) msg+1, len-1); - dbgprintf("Compressed message uncompressed with status %d, length: new %ld, old %d.\n", + DBGPRINTF("Compressed message uncompressed with status %d, length: new %ld, old %d.\n", ret, (long) iLenDefBuf, len-1); /* Now check if the uncompression worked. If not, there is not much we can do. In * that case, we log an error message but ignore the message itself. Storing the @@ -801,7 +845,7 @@ parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int bPa */ if(iMsg == iMaxLine) { *(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */ - printline(hname, hnameIP, tmpline, bParseHost, flags, flowCtlType, pszInputName); + printline(hname, hnameIP, tmpline, flags, flowCtlType, pszInputName, stTime, ttGenTime); } else { /* This case in theory never can happen. If it happens, we have * a logic error. I am checking for it, because if I would not, @@ -810,7 +854,7 @@ parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int bPa * (I couldn't do any more smart things anyway...). * rgerhards, 2007-9-20 */ - dbgprintf("internal error: iMsg > max msg size in printchopped()\n"); + DBGPRINTF("internal error: iMsg > max msg size in printchopped()\n"); } FINALIZE; /* in this case, we are done... nothing left we can do */ } @@ -853,7 +897,7 @@ parseAndSubmitMessage(uchar *hname, uchar *hnameIP, uchar *msg, int len, int bPa *(pMsg + iMsg) = '\0'; /* space *is* reserved for this! */ /* typically, we should end up here! */ - printline(hname, hnameIP, tmpline, bParseHost, flags, flowCtlType, pszInputName); + printline(hname, hnameIP, tmpline, flags, flowCtlType, pszInputName, stTime, ttGenTime); finalize_it: if(tmpline != NULL) @@ -896,12 +940,11 @@ logmsgInternal(int iErr, int pri, uchar *msg, int flags) DEFiRet; CHKiRet(msgConstruct(&pMsg)); - MsgSetInputName(pMsg, "rsyslogd"); - MsgSetUxTradMsg(pMsg, (char*)msg); + MsgSetInputName(pMsg, UCHAR_CONSTANT("rsyslogd"), sizeof("rsyslogd")-1); MsgSetRawMsg(pMsg, (char*)msg); - MsgSetHOSTNAME(pMsg, (char*)glbl.GetLocalHostName()); - MsgSetRcvFrom(pMsg, (char*)glbl.GetLocalHostName()); - MsgSetRcvFromIP(pMsg, (uchar*)"127.0.0.1"); + MsgSetHOSTNAME(pMsg, glbl.GetLocalHostName()); + MsgSetRcvFrom(pMsg, glbl.GetLocalHostName()); + MsgSetRcvFromIP(pMsg, UCHAR_CONSTANT("127.0.0.1")); /* check if we have an error code associated and, if so, * adjust the tag. -- rgerhards, 2008-06-27 */ @@ -975,14 +1018,14 @@ static rsRetVal shouldProcessThisMessage(selector_t *f, msg_t *pMsg, int *bProce } else if(f->eHostnameCmpMode == HN_COMP_MATCH) { if(rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) { /* not equal, so we are already done... */ - dbgprintf("hostname filter '+%s' does not match '%s'\n", + DBGPRINTF("hostname filter '+%s' does not match '%s'\n", rsCStrGetSzStrNoNULL(f->pCSHostnameComp), getHOSTNAME(pMsg)); FINALIZE; } } else { /* must be -hostname */ if(!rsCStrSzStrCmp(f->pCSHostnameComp, (uchar*) getHOSTNAME(pMsg), getHOSTNAMELen(pMsg))) { /* not equal, so we are already done... */ - dbgprintf("hostname filter '-%s' does not match '%s'\n", + DBGPRINTF("hostname filter '-%s' does not match '%s'\n", rsCStrGetSzStrNoNULL(f->pCSHostnameComp), getHOSTNAME(pMsg)); FINALIZE; } @@ -1003,7 +1046,7 @@ static rsRetVal shouldProcessThisMessage(selector_t *f, msg_t *pMsg, int *bProce if((!bEqv && !bInv) || (bEqv && bInv)) { /* not equal or inverted selection, so we are already done... */ - dbgprintf("programname filter '%s' does not match '%s'\n", + DBGPRINTF("programname filter '%s' does not match '%s'\n", rsCStrGetSzStrNoNULL(f->pCSProgNameComp), getProgramName(pMsg)); FINALIZE; } @@ -1013,7 +1056,7 @@ static rsRetVal shouldProcessThisMessage(selector_t *f, msg_t *pMsg, int *bProce if(f->f_filter_type == FILTER_PRI) { /* skip messages that are incorrect priority */ - if ( (f->f_filterData.f_pmask[pMsg->iFacility] == TABLE_NOPRI) || \ + if ( (f->f_filterData.f_pmask[pMsg->iFacility] == TABLE_NOPRI) || ((f->f_filterData.f_pmask[pMsg->iFacility] & (1<<pMsg->iSeverity)) == 0) ) bRet = 0; else @@ -1024,7 +1067,7 @@ static rsRetVal shouldProcessThisMessage(selector_t *f, msg_t *pMsg, int *bProce CHKiRet(vm.SetMsg(pVM, pMsg)); CHKiRet(vm.ExecProg(pVM, f->f_filterData.f_expr->pVmprg)); CHKiRet(vm.PopBoolFromStack(pVM, &pResult)); - dbgprintf("result of expression evaluation: %lld\n", pResult->val.num); + DBGPRINTF("result of expression evaluation: %lld\n", pResult->val.num); /* VM is destructed on function exit */ bRet = (pResult->val.num) ? 1 : 0; } else { @@ -1049,7 +1092,12 @@ static rsRetVal shouldProcessThisMessage(selector_t *f, msg_t *pMsg, int *bProce break; case FIOP_REGEX: if(rsCStrSzStrMatchRegex(f->f_filterData.prop.pCSCompValue, - (unsigned char*) pszPropVal) == 0) + (unsigned char*) pszPropVal, 0, &f->f_filterData.prop.regex_cache) == RS_RET_OK) + bRet = 1; + break; + case FIOP_EREREGEX: + if(rsCStrSzStrMatchRegex(f->f_filterData.prop.pCSCompValue, + (unsigned char*) pszPropVal, 1, &f->f_filterData.prop.regex_cache) == RS_RET_OK) bRet = 1; break; default: @@ -1111,7 +1159,7 @@ DEFFUNC_llExecFunc(processMsgDoActions) assert(pAction != NULL); if((pAction->bExecWhenPrevSusp == 1) && (pDoActData->bPrevWasSuspended == 0)) { - dbgprintf("not calling action because the previous one is not suspended\n"); + DBGPRINTF("not calling action because the previous one is not suspended\n"); ABORT_FINALIZE(RS_RET_OK); } @@ -1178,6 +1226,9 @@ msgConsumer(void __attribute__((unused)) *notNeeded, void *pUsr) assert(pMsg != NULL); + if((pMsg->msgFlags & NEEDS_PARSING) != 0) { + parseMsg(pMsg); + } processMsg(pMsg); msgDestruct(&pMsg); @@ -1191,12 +1242,14 @@ msgConsumer(void __attribute__((unused)) *notNeeded, void *pUsr) * to after the terminating SP. The caller must ensure that the * provided buffer is large enough to hold the to be extracted value. * Returns 0 if everything is fine or 1 if either the field is not - * SP-terminated or any other error occurs. - * rger, 2005-11-24 + * SP-terminated or any other error occurs. -- rger, 2005-11-24 + * The function now receives the size of the string and makes sure + * that it does not process more than that. The *pLenStr counter is + * updated on exit. -- rgerhards, 2009-09-23 */ -static int parseRFCField(char **pp2parse, char *pResult) +static int parseRFCField(uchar **pp2parse, uchar *pResult, int *pLenStr) { - char *p2parse; + uchar *p2parse; int iRet = 0; assert(pp2parse != NULL); @@ -1206,14 +1259,17 @@ static int parseRFCField(char **pp2parse, char *pResult) p2parse = *pp2parse; /* this is the actual parsing loop */ - while(*p2parse && *p2parse != ' ') { + while(*pLenStr > 0 && *p2parse != ' ') { *pResult++ = *p2parse++; + --(*pLenStr); } - if(*p2parse == ' ') + if(*pLenStr > 0 && *p2parse == ' ') { ++p2parse; /* eat SP, but only if not at end of string */ - else + --(*pLenStr); + } else { iRet = 1; /* there MUST be an SP! */ + } *pResult = '\0'; /* set the new parse pointer */ @@ -1229,20 +1285,24 @@ static int parseRFCField(char **pp2parse, char *pResult) * to after the terminating SP. The caller must ensure that the * provided buffer is large enough to hold the to be extracted value. * Returns 0 if everything is fine or 1 if either the field is not - * SP-terminated or any other error occurs. - * rger, 2005-11-24 + * SP-terminated or any other error occurs. -- rger, 2005-11-24 + * The function now receives the size of the string and makes sure + * that it does not process more than that. The *pLenStr counter is + * updated on exit. -- rgerhards, 2009-09-23 */ -static int parseRFCStructuredData(char **pp2parse, char *pResult) +static int parseRFCStructuredData(uchar **pp2parse, uchar *pResult, int *pLenStr) { - char *p2parse; + uchar *p2parse; int bCont = 1; int iRet = 0; + int lenStr; assert(pp2parse != NULL); assert(*pp2parse != NULL); assert(pResult != NULL); p2parse = *pp2parse; + lenStr = *pLenStr; /* this is the actual parsing loop * Remeber: structured data starts with [ and includes any characters @@ -1250,40 +1310,55 @@ static int parseRFCStructuredData(char **pp2parse, char *pResult) * structured data. There may also be \] inside the structured data, which * do NOT terminate an element. */ - if(*p2parse != '[') + if(lenStr == 0 || *p2parse != '[') return 1; /* this is NOT structured data! */ if(*p2parse == '-') { /* empty structured data? */ *pResult++ = '-'; ++p2parse; + --lenStr; } else { while(bCont) { - if(*p2parse == '\0') { - iRet = 1; /* this is not valid! */ - bCont = 0; - } else if(*p2parse == '\\' && *(p2parse+1) == ']') { + if(lenStr < 2) { + /* we now need to check if we have only structured data */ + if(lenStr > 0 && *p2parse == ']') { + *pResult++ = *p2parse; + p2parse++; + lenStr--; + bCont = 0; + } else { + iRet = 1; /* this is not valid! */ + bCont = 0; + } + } else if(*p2parse == '\\' && *(p2parse+1) == ']') { /* this is escaped, need to copy both */ *pResult++ = *p2parse++; *pResult++ = *p2parse++; + lenStr -= 2; } else if(*p2parse == ']' && *(p2parse+1) == ' ') { /* found end, just need to copy the ] and eat the SP */ *pResult++ = *p2parse; p2parse += 2; + lenStr -= 2; bCont = 0; } else { *pResult++ = *p2parse++; + --lenStr; } } } - if(*p2parse == ' ') + if(lenStr > 0 && *p2parse == ' ') { ++p2parse; /* eat SP, but only if not at end of string */ - else + --lenStr; + } else { iRet = 1; /* there MUST be an SP! */ + } *pResult = '\0'; /* set the new parse pointer */ *pp2parse = p2parse; + *pLenStr = lenStr; return 0; } @@ -1304,26 +1379,30 @@ static int parseRFCStructuredData(char **pp2parse, char *pResult) * * rger, 2005-11-24 */ -static int parseRFCSyslogMsg(msg_t *pMsg, int flags) +int parseRFCSyslogMsg(msg_t *pMsg, int flags) { - char *p2parse; - char *pBuf; + uchar *p2parse; + uchar *pBuf; + int lenMsg; int bContParse = 1; + BEGINfunc assert(pMsg != NULL); - assert(pMsg->pszUxTradMsg != NULL); - p2parse = (char*) pMsg->pszUxTradMsg; + assert(pMsg->pszRawMsg != NULL); + p2parse = pMsg->pszRawMsg + pMsg->offAfterPRI; /* point to start of text, after PRI */ + lenMsg = pMsg->iLenRawMsg - pMsg->offAfterPRI; - /* do a sanity check on the version and eat it */ + /* do a sanity check on the version and eat it (the caller checked this already) */ assert(p2parse[0] == '1' && p2parse[1] == ' '); p2parse += 2; + lenMsg -= 2; /* Now get us some memory we can use as a work buffer while parsing. * We simply allocated a buffer sufficiently large to hold all of the * message, so we can not run into any troubles. I think this is * more wise then to use individual buffers. */ - if((pBuf = malloc(sizeof(char)* strlen(p2parse) + 1)) == NULL) + if((pBuf = malloc(sizeof(uchar) * (lenMsg + 1))) == NULL) return 1; /* IMPORTANT NOTE: @@ -1334,19 +1413,19 @@ static int parseRFCSyslogMsg(msg_t *pMsg, int flags) */ /* TIMESTAMP */ - if(datetime.ParseTIMESTAMP3339(&(pMsg->tTIMESTAMP), &p2parse) == RS_RET_OK) { + if(datetime.ParseTIMESTAMP3339(&(pMsg->tTIMESTAMP), &p2parse, &lenMsg) == RS_RET_OK) { if(flags & IGNDATE) { /* we need to ignore the msg data, so simply copy over reception date */ memcpy(&pMsg->tTIMESTAMP, &pMsg->tRcvdAt, sizeof(struct syslogTime)); } } else { - dbgprintf("no TIMESTAMP detected!\n"); + DBGPRINTF("no TIMESTAMP detected!\n"); bContParse = 0; } /* HOSTNAME */ if(bContParse) { - parseRFCField(&p2parse, pBuf); + parseRFCField(&p2parse, pBuf, &lenMsg); MsgSetHOSTNAME(pMsg, pBuf); } else { /* we can not parse, so we get the system we @@ -1357,32 +1436,33 @@ static int parseRFCSyslogMsg(msg_t *pMsg, int flags) /* APP-NAME */ if(bContParse) { - parseRFCField(&p2parse, pBuf); - MsgSetAPPNAME(pMsg, pBuf); + parseRFCField(&p2parse, pBuf, &lenMsg); + MsgSetAPPNAME(pMsg, (char*)pBuf); } /* PROCID */ if(bContParse) { - parseRFCField(&p2parse, pBuf); - MsgSetPROCID(pMsg, pBuf); + parseRFCField(&p2parse, pBuf, &lenMsg); + MsgSetPROCID(pMsg, (char*)pBuf); } /* MSGID */ if(bContParse) { - parseRFCField(&p2parse, pBuf); - MsgSetMSGID(pMsg, pBuf); + parseRFCField(&p2parse, pBuf, &lenMsg); + MsgSetMSGID(pMsg, (char*)pBuf); } /* STRUCTURED-DATA */ if(bContParse) { - parseRFCStructuredData(&p2parse, pBuf); - MsgSetStructuredData(pMsg, pBuf); + parseRFCStructuredData(&p2parse, pBuf, &lenMsg); + MsgSetStructuredData(pMsg, (char*)pBuf); } /* MSG */ - MsgSetMSG(pMsg, p2parse); + MsgSetMSG(pMsg, (lenMsg == 0) ? "" : (char*)p2parse); free(pBuf); + ENDfunc return 0; /* all ok */ } @@ -1400,19 +1480,23 @@ static int parseRFCSyslogMsg(msg_t *pMsg, int flags) * but I thought I log it in this comment. * rgerhards, 2006-01-10 */ -static int parseLegacySyslogMsg(msg_t *pMsg, int flags) +int parseLegacySyslogMsg(msg_t *pMsg, int flags) { - char *p2parse; + uchar *p2parse; char *pBuf; char *pWork; cstr_t *pStrB; int iCnt; + int lenMsg; int bTAGCharDetected; BEGINfunc assert(pMsg != NULL); - assert(pMsg->pszUxTradMsg != NULL); - p2parse = (char*) pMsg->pszUxTradMsg; + assert(pMsg->pszRawMsg != NULL); + lenMsg = pMsg->iLenRawMsg - (pMsg->offAfterPRI + 1); +RUNLOG_VAR("%d", pMsg->offAfterPRI); +RUNLOG_VAR("%d", lenMsg); + p2parse = pMsg->pszRawMsg + pMsg->offAfterPRI; /* point to start of text, after PRI */ /* Check to see if msg contains a timestamp. We start by assuming * that the message timestamp is the time of reciption (which we @@ -1420,13 +1504,14 @@ static int parseLegacySyslogMsg(msg_t *pMsg, int flags) * message. There we go from high-to low precison and are done * when we find a matching one. -- rgerhards, 2008-09-16 */ - if(datetime.ParseTIMESTAMP3339(&(pMsg->tTIMESTAMP), &p2parse) == RS_RET_OK) { + if(datetime.ParseTIMESTAMP3339(&(pMsg->tTIMESTAMP), &p2parse, &lenMsg) == RS_RET_OK) { /* we are done - parse pointer is moved by ParseTIMESTAMP3339 */; - } else if(datetime.ParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), &p2parse) == RS_RET_OK) { + } else if(datetime.ParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), &p2parse, &lenMsg) == RS_RET_OK) { /* we are done - parse pointer is moved by ParseTIMESTAMP3164 */; - } else if(*p2parse == ' ') { /* try to see if it is slighly malformed - HP procurve seems to do that sometimes */ + } else if(*p2parse == ' ' && lenMsg > 1) { /* try to see if it is slighly malformed - HP procurve seems to do that sometimes */ ++p2parse; /* move over space */ - if(datetime.ParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), &p2parse) == RS_RET_OK) { + --lenMsg; + if(datetime.ParseTIMESTAMP3164(&(pMsg->tTIMESTAMP), &p2parse, &lenMsg) == RS_RET_OK) { /* indeed, we got it! */ /* we are done - parse pointer is moved by ParseTIMESTAMP3164 */; } else { @@ -1434,6 +1519,7 @@ static int parseLegacySyslogMsg(msg_t *pMsg, int flags) * for this try. */ --p2parse; + ++lenMsg; } } @@ -1462,19 +1548,20 @@ static int parseLegacySyslogMsg(msg_t *pMsg, int flags) * the fields. I think this logic shall work with any type of syslog message. */ bTAGCharDetected = 0; - if(pMsg->bParseHOSTNAME) { + if(flags & PARSE_HOSTNAME) { /* TODO: quick and dirty memory allocation */ /* the memory allocated is far too much in most cases. But on the plus side, * it is quite fast... - rgerhards, 2007-09-20 */ - if((pBuf = malloc(sizeof(char)* (strlen(p2parse) +1))) == NULL) + if((pBuf = malloc(sizeof(char) * (lenMsg + 1))) == NULL) return 1; pWork = pBuf; /* this is the actual parsing loop */ - while(*p2parse && *p2parse != ' ' && *p2parse != ':') { + while(lenMsg > 0 && *p2parse != ' ' && *p2parse != ':') { if(*p2parse == '[' || *p2parse == ']' || *p2parse == '/') bTAGCharDetected = 1; *pWork++ = *p2parse++; + --lenMsg; } /* we need to handle ':' seperately, because it terminates the * TAG - so we also need to terminate the parser here! @@ -1486,13 +1573,17 @@ static int parseLegacySyslogMsg(msg_t *pMsg, int flags) * will be true and the parse pointer remain as is. This is perfectly * well. */ - if(*p2parse == ':') { - bTAGCharDetected = 1; - /* We will move hostname to tag, so preserve ':' (otherwise we - * will needlessly change the message format) */ - *pWork++ = *p2parse++; - } else if(*p2parse == ' ') - ++p2parse; + if(lenMsg > 0) { + if(*p2parse == ':') { + bTAGCharDetected = 1; + /* We will move hostname to tag, so preserve ':' (otherwise we + * will needlessly change the message format) */ + *pWork++ = *p2parse++; + } else if(*p2parse == ' ') { + ++p2parse; + } + --lenMsg; + } *pWork = '\0'; MsgAssignHOSTNAME(pMsg, pBuf); } @@ -1501,7 +1592,7 @@ static int parseLegacySyslogMsg(msg_t *pMsg, int flags) /* indeed, this smells like a TAG, so lets use it for this. We take * the HOSTNAME from the sender system instead. */ - dbgprintf("HOSTNAME contains invalid characters, assuming it to be a TAG.\n"); + DBGPRINTF("HOSTNAME contains invalid characters, assuming it to be a TAG.\n"); moveHOSTNAMEtoTAG(pMsg); MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } @@ -1526,22 +1617,23 @@ static int parseLegacySyslogMsg(msg_t *pMsg, int flags) * the records: the code is currently clean, but we could optimize it! */ if(!bTAGCharDetected) { uchar *pszTAG; - if(rsCStrConstruct(&pStrB) != RS_RET_OK) + if(cstrConstruct(&pStrB) != RS_RET_OK) return 1; rsCStrSetAllocIncrement(pStrB, 33); pWork = pBuf; iCnt = 0; - while(*p2parse && *p2parse != ':' && *p2parse != ' ') { - rsCStrAppendChar(pStrB, *p2parse++); + while(lenMsg > 0 && *p2parse != ':' && *p2parse != ' ') { + cstrAppendChar(pStrB, *p2parse++); ++iCnt; + --lenMsg; } - if(*p2parse == ':') { + if(lenMsg > 0 && *p2parse == ':') { ++p2parse; - rsCStrAppendChar(pStrB, ':'); + --lenMsg; + cstrAppendChar(pStrB, ':'); } - rsCStrFinish(pStrB); - - rsCStrConvSzStrAndDestruct(pStrB, &pszTAG, 1); + cstrFinalize(pStrB); + cstrConvSzStrAndDestruct(pStrB, &pszTAG, 1); if(pszTAG == NULL) { /* rger, 2005-11-10: no TAG found - this implies that what * we have considered to be the HOSTNAME is most probably the @@ -1551,7 +1643,7 @@ static int parseLegacySyslogMsg(msg_t *pMsg, int flags) * the hostname. This situation is the standard case with * stock BSD syslogd. */ - dbgprintf("No TAG in message, assuming that HOSTNAME is missing.\n"); + DBGPRINTF("No TAG in message, assuming that HOSTNAME is missing.\n"); moveHOSTNAMEtoTAG(pMsg); MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } else { /* we have a TAG, so we can happily set it ;) */ @@ -1567,13 +1659,13 @@ static int parseLegacySyslogMsg(msg_t *pMsg, int flags) */ if(!(flags & INTERNAL_MSG)) { - dbgprintf("HOSTNAME and TAG not parsed by user configuraton.\n"); + DBGPRINTF("HOSTNAME and TAG not parsed by user configuraton.\n"); MsgSetHOSTNAME(pMsg, getRcvFrom(pMsg)); } } /* The rest is the actual MSG */ - MsgSetMSG(pMsg, p2parse); + MsgSetMSG(pMsg, (lenMsg == 0) ? "" : (char*)p2parse); ENDfunc return 0; /* all ok */ @@ -1595,7 +1687,7 @@ submitMsg(msg_t *pMsg) ISOBJ_TYPE_assert(pMsg, msg); MsgPrepareEnqueue(pMsg); - queueEnqObj(pMsgQueue, pMsg->flowCtlType, (void*) pMsg); + qqueueEnqObj(pMsgQueue, pMsg->flowCtlType, (void*) pMsg); RETiRet; } @@ -1626,9 +1718,10 @@ logmsg(msg_t *pMsg, int flags) BEGINfunc assert(pMsg != NULL); - assert(pMsg->pszUxTradMsg != NULL); - msg = (char*) pMsg->pszUxTradMsg; - dbgprintf("logmsg: flags %x, from '%s', msg %s\n", flags, getRcvFrom(pMsg), msg); + assert(pMsg->pszRawMsg != NULL); + + msg = (char*) pMsg->pszRawMsg + pMsg->offAfterPRI; /* point to start of text, after PRI */ + DBGPRINTF("logmsg: flags %x, from '%s', msg %s\n", flags, getRcvFrom(pMsg), msg); /* rger 2005-11-24 (happy thanksgiving!): we now need to check if we have * a traditional syslog message or one formatted according to syslog-protocol. @@ -1636,14 +1729,14 @@ logmsg(msg_t *pMsg, int flags) * -protocol VERSION field for the detection. */ if(msg[0] == '1' && msg[1] == ' ') { - dbgprintf("Message has syslog-protocol format.\n"); + DBGPRINTF("Message has syslog-protocol format.\n"); setProtocolVersion(pMsg, 1); if(parseRFCSyslogMsg(pMsg, flags) == 1) { msgDestruct(&pMsg); return; } } else { /* we have legacy syslog */ - dbgprintf("Message has legacy syslog format.\n"); + DBGPRINTF("Message has legacy syslog format.\n"); setProtocolVersion(pMsg, 0); if(parseLegacySyslogMsg(pMsg, flags) == 1) { msgDestruct(&pMsg); @@ -1656,7 +1749,7 @@ logmsg(msg_t *pMsg, int flags) /* now submit the message to the main queue - then we are done */ pMsg->msgFlags = flags; MsgPrepareEnqueue(pMsg); - queueEnqObj(pMsgQueue, pMsg->flowCtlType, (void*) pMsg); + qqueueEnqObj(pMsgQueue, pMsg->flowCtlType, (void*) pMsg); ENDfunc } @@ -1693,7 +1786,7 @@ DEFFUNC_llExecFunc(flushRptdMsgsActions) * in an acceptable way. -- rgerhards, 2008-09-16 */ if (pAction->f_prevcount && time(NULL) >= REPEATTIME(pAction)) { - dbgprintf("flush %s: repeated %d times, %d sec.\n", + DBGPRINTF("flush %s: repeated %d times, %d sec.\n", module.GetStateName(pAction->pMod), pAction->f_prevcount, repeatinterval[pAction->f_repeatcount]); actionWriteToAction(pAction); @@ -1729,9 +1822,9 @@ static void debug_switch() if(debugging_on == 0) { debugging_on = 1; - dbgprintf("Switching debugging_on to true\n"); + DBGPRINTF("Switching debugging_on to true\n"); } else { - dbgprintf("Switching debugging_on to false\n"); + DBGPRINTF("Switching debugging_on to false\n"); debugging_on = 0; } @@ -1875,7 +1968,7 @@ void legacyOptsParseTCP(char ch, char *arg) * a minimal delay, but it is much cleaner than the approach of doing everything * inside the signal handler. * rgerhards, 2005-10-26 - * Note: we do not call dbgprintf() as this may cause us to block in case something + * Note: we do not call DBGPRINTF() as this may cause us to block in case something * with the threading is wrong. */ static void doDie(int sig) @@ -1904,10 +1997,9 @@ static void doDie(int sig) static void freeAllDynMemForTermination(void) { - if(pszMainMsgQFName != NULL) - free(pszMainMsgQFName); - if(pModDir != NULL) - free(pModDir); + free(pszMainMsgQFName); + free(pModDir); + free(pszConfDAGFile); } @@ -1924,7 +2016,7 @@ die(int sig) { char buf[256]; - dbgprintf("exiting on signal %d\n", sig); + DBGPRINTF("exiting on signal %d\n", sig); /* IMPORTANT: we should close the inputs first, and THEN send our termination * message. If we do it the other way around, logmsgInternal() may block on @@ -1939,8 +2031,8 @@ die(int sig) */ /* close the inputs */ - dbgprintf("Terminating input threads...\n"); - thrdTerminateAll(); /* TODO: inputs only, please */ + DBGPRINTF("Terminating input threads...\n"); + thrdTerminateAll(); /* and THEN send the termination log message (see long comment above) */ if (sig) { @@ -1953,17 +2045,17 @@ die(int sig) } /* drain queue (if configured so) and stop main queue worker thread pool */ - dbgprintf("Terminating main queue...\n"); - queueDestruct(&pMsgQueue); + DBGPRINTF("Terminating main queue...\n"); + qqueueDestruct(&pMsgQueue); pMsgQueue = NULL; /* Free ressources and close connections. This includes flushing any remaining * repeated msgs. */ - dbgprintf("Terminating outputs...\n"); + DBGPRINTF("Terminating outputs...\n"); freeSelectors(); - dbgprintf("all primary multi-thread sources have been terminated - now doing aux cleanup...\n"); + DBGPRINTF("all primary multi-thread sources have been terminated - now doing aux cleanup...\n"); /* rger 2005-02-22 * now clean up the in-memory structures. OK, the OS * would also take care of that, but if we do it @@ -2001,7 +2093,7 @@ die(int sig) */ module.UnloadAndDestructAll(eMOD_LINK_ALL); - dbgprintf("Clean shutdown completed, bye\n"); + DBGPRINTF("Clean shutdown completed, bye\n"); /* dbgClassExit MUST be the last one, because it de-inits the debug system */ dbgClassExit(); @@ -2039,16 +2131,92 @@ static rsRetVal setActionResumeInterval(void __attribute__((unused)) *pVal, int } +/* set the processes max number ob files (upon configuration request) + * 2009-04-14 rgerhards + */ +static rsRetVal setMaxFiles(void __attribute__((unused)) *pVal, int iFiles) +{ + struct rlimit maxFiles; + char errStr[1024]; + DEFiRet; + + maxFiles.rlim_cur = iFiles; + maxFiles.rlim_max = iFiles; + + if(setrlimit(RLIMIT_NOFILE, &maxFiles) < 0) { + /* NOTE: under valgrind, we seem to be unable to extend the size! */ + rs_strerror_r(errno, errStr, sizeof(errStr)); + errmsg.LogError(0, RS_RET_ERR_RLIM_NOFILE, "could not set process file limit to %d: %s [kernel max %ld]", + iFiles, errStr, (long) maxFiles.rlim_max); + ABORT_FINALIZE(RS_RET_ERR_RLIM_NOFILE); + } + DBGPRINTF("Max number of files set to %d [kernel max %ld].\n", iFiles, (long) maxFiles.rlim_max); + +finalize_it: + RETiRet; +} + + /* set the processes umask (upon configuration request) */ static rsRetVal setUmask(void __attribute__((unused)) *pVal, int iUmask) { umask(iUmask); - dbgprintf("umask set to 0%3.3o.\n", iUmask); + DBGPRINTF("umask set to 0%3.3o.\n", iUmask); return RS_RET_OK; } +/* drop to specified group + * if something goes wrong, the function never returns + * Note that such an abort can cause damage to on-disk structures, so we should + * re-design the "interface" in the long term. -- rgerhards, 2008-11-26 + */ +static void doDropPrivGid(int iGid) +{ + int res; + uchar szBuf[1024]; + + res = setgroups(0, NULL); /* remove all supplementary group IDs */ + if(res) { + perror("could not remove supplemental group IDs"); + exit(1); + } + DBGPRINTF("setgroups(0, NULL): %d\n", res); + res = setgid(iGid); + if(res) { + /* if we can not set the userid, this is fatal, so let's unconditionally abort */ + perror("could not set requested group id"); + exit(1); + } + DBGPRINTF("setgid(%d): %d\n", iGid, res); + snprintf((char*)szBuf, sizeof(szBuf)/sizeof(uchar), "rsyslogd's groupid changed to %d", iGid); + logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, szBuf, 0); +} + + +/* drop to specified user + * if something goes wrong, the function never returns + * Note that such an abort can cause damage to on-disk structures, so we should + * re-design the "interface" in the long term. -- rgerhards, 2008-11-19 + */ +static void doDropPrivUid(int iUid) +{ + int res; + uchar szBuf[1024]; + + res = setuid(iUid); + if(res) { + /* if we can not set the userid, this is fatal, so let's unconditionally abort */ + perror("could not set requested userid"); + exit(1); + } + DBGPRINTF("setuid(%d): %d\n", iUid, res); + snprintf((char*)szBuf, sizeof(szBuf)/sizeof(uchar), "rsyslogd's userid changed to %d", iUid); + logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, szBuf, 0); +} + + /* helper to freeSelectors(), used with llExecFunc() to flush * pending output. -- rgerhards, 2007-08-02 * We do not need to lock the action object here as the processing @@ -2078,7 +2246,7 @@ static void freeSelectors(void) selector_t *fPrev; if(Files != NULL) { - dbgprintf("Freeing log structures.\n"); + DBGPRINTF("Freeing log structures.\n"); for(f = Files ; f != NULL ; f = f->f_next) { llExecFunc(&f->llActList, freeSelectorsActions, NULL); @@ -2099,6 +2267,184 @@ static void freeSelectors(void) } +/* helper to generateConfigDAG, to print out all actions via + * the llExecFunc() facility. + * rgerhards, 2007-08-02 + */ +struct dag_info { + FILE *fp; /* output file */ + int iActUnit; /* current action unit number */ + int iAct; /* current action in unit */ + int bDiscarded; /* message discarded (config error) */ + }; +DEFFUNC_llExecFunc(generateConfigDAGAction) +{ + action_t *pAction; + uchar *pszModName; + uchar *pszVertexName; + struct dag_info *pDagInfo; + DEFiRet; + + pDagInfo = (struct dag_info*) pParam; + pAction = (action_t*) pData; + + pszModName = module.GetStateName(pAction->pMod); + + /* vertex */ + if(pAction->pszName == NULL) { + if(!strcmp((char*)pszModName, "builtin-discard")) + pszVertexName = (uchar*)"discard"; + else + pszVertexName = pszModName; + } else { + pszVertexName = pAction->pszName; + } + + fprintf(pDagInfo->fp, "\tact%d_%d\t\t[label=\"%s\"%s%s]\n", + pDagInfo->iActUnit, pDagInfo->iAct, pszVertexName, + pDagInfo->bDiscarded ? " style=dotted color=red" : "", + (pAction->pQueue->qType == QUEUETYPE_DIRECT) ? "" : " shape=hexagon" + ); + + /* edge */ + if(pDagInfo->iAct == 0) { + } else { + fprintf(pDagInfo->fp, "\tact%d_%d -> act%d_%d[%s%s]\n", + pDagInfo->iActUnit, pDagInfo->iAct - 1, + pDagInfo->iActUnit, pDagInfo->iAct, + pDagInfo->bDiscarded ? " style=dotted color=red" : "", + pAction->bExecWhenPrevSusp ? " label=\"only if\\nsuspended\"" : "" ); + } + + /* check for discard */ + if(!strcmp((char*) pszModName, "builtin-discard")) { + fprintf(pDagInfo->fp, "\tact%d_%d\t\t[shape=box]\n", + pDagInfo->iActUnit, pDagInfo->iAct); + pDagInfo->bDiscarded = 1; + } + + + ++pDagInfo->iAct; + + RETiRet; +} + + +/* create config DAG + * This functions takes a rsyslog config and produces a .dot file for use + * with graphviz (http://www.graphviz.org). This is done in an effort to + * document, and also potentially troubleshoot, configurations. Plus, I + * consider it a nice feature to explain some concepts. Note that the + * current version only produces a graph with relatively little information. + * This is a foundation that may be later expanded (if it turns out to be + * useful enough). + * rgerhards, 2009-05-11 + */ +static rsRetVal +generateConfigDAG(uchar *pszDAGFile) +{ + selector_t *f; + FILE *fp; + int iActUnit = 1; + int bHasFilter = 0; /* filter associated with this action unit? */ + int bHadFilter; + int i; + struct dag_info dagInfo; + char *pszFilterName; + char szConnectingNode[64]; + DEFiRet; + + assert(pszDAGFile != NULL); + + if((fp = fopen((char*) pszDAGFile, "w")) == NULL) { + logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*) + "configuraton graph output file could not be opened, none generated", 0); + ABORT_FINALIZE(RS_RET_FILENAME_INVALID); + } + + dagInfo.fp = fp; + + /* from here on, we assume writes go well. This here is a really + * unimportant utility function and if something goes wrong, it has + * almost no effect. So let's not overdo this... + */ + fprintf(fp, "# graph created by rsyslog " VERSION "\n\n" + "# use the dot tool from http://www.graphviz.org to visualize!\n" + "digraph rsyslogConfig {\n" + "\tinputs [shape=tripleoctagon]\n" + "\tinputs -> act0_0\n" + "\tact0_0 [label=\"main\\nqueue\" shape=hexagon]\n" + /*"\tmainq -> act1_0\n"*/ + ); + strcpy(szConnectingNode, "act0_0"); + dagInfo.bDiscarded = 0; + + for(f = Files; f != NULL ; f = f->f_next) { + /* BSD-Style filters are currently ignored */ + bHadFilter = bHasFilter; + if(f->f_filter_type == FILTER_PRI) { + bHasFilter = 0; + for (i = 0; i <= LOG_NFACILITIES; i++) + if (f->f_filterData.f_pmask[i] != 0xff) { + bHasFilter = 1; + break; + } + } else { + bHasFilter = 1; + } + + /* we know we have a filter, so it can be false */ + switch(f->f_filter_type) { + case FILTER_PRI: + pszFilterName = "pri filter"; + break; + case FILTER_PROP: + pszFilterName = "property filter"; + break; + case FILTER_EXPR: + pszFilterName = "script filter"; + break; + } + + /* write action unit node */ + if(bHasFilter) { + fprintf(fp, "\t%s -> act%d_end\t[label=\"%s:\\nfalse\"]\n", + szConnectingNode, iActUnit, pszFilterName); + fprintf(fp, "\t%s -> act%d_0\t[label=\"%s:\\ntrue\"]\n", + szConnectingNode, iActUnit, pszFilterName); + fprintf(fp, "\tact%d_end\t\t\t\t[shape=point]\n", iActUnit); + snprintf(szConnectingNode, sizeof(szConnectingNode), "act%d_end", iActUnit); + } else { + fprintf(fp, "\t%s -> act%d_0\t[label=\"no filter\"]\n", + szConnectingNode, iActUnit); + snprintf(szConnectingNode, sizeof(szConnectingNode), "act%d_0", iActUnit); + } + + /* draw individual nodes */ + dagInfo.iActUnit = iActUnit; + dagInfo.iAct = 0; + dagInfo.bDiscarded = 0; + llExecFunc(&f->llActList, generateConfigDAGAction, &dagInfo); /* actions */ + + /* finish up */ + if(bHasFilter && !dagInfo.bDiscarded) { + fprintf(fp, "\tact%d_%d -> %s\n", + iActUnit, dagInfo.iAct - 1, szConnectingNode); + } + + ++iActUnit; + } + + fprintf(fp, "\t%s -> act%d_0\n", szConnectingNode, iActUnit); + fprintf(fp, "\tact%d_0\t\t[label=discard shape=box]\n" + "}\n", iActUnit); + fclose(fp); + +finalize_it: + RETiRet; +} + + /* helper to dbPrintInitInfo, to print out all actions via * the llExecFunc() facility. * rgerhards, 2007-08-02 @@ -2107,11 +2453,12 @@ DEFFUNC_llExecFunc(dbgPrintInitInfoAction) { DEFiRet; iRet = actionDbgPrint((action_t*) pData); - dbgprintf("\n"); + DBGPRINTF("\n"); RETiRet; } + /* print debug information as part of init(). This pretty much * outputs the whole config of rsyslogd. I've moved this code * out of init() to clean it somewhat up. @@ -2119,47 +2466,48 @@ DEFFUNC_llExecFunc(dbgPrintInitInfoAction) */ static void dbgPrintInitInfo(void) { - register selector_t *f; + selector_t *f; int iSelNbr = 1; int i; - dbgprintf("\nActive selectors:\n"); + DBGPRINTF("\nActive selectors:\n"); for (f = Files; f != NULL ; f = f->f_next) { - dbgprintf("Selector %d:\n", iSelNbr++); + DBGPRINTF("Selector %d:\n", iSelNbr++); if(f->pCSProgNameComp != NULL) - dbgprintf("tag: '%s'\n", rsCStrGetSzStrNoNULL(f->pCSProgNameComp)); + DBGPRINTF("tag: '%s'\n", rsCStrGetSzStrNoNULL(f->pCSProgNameComp)); if(f->eHostnameCmpMode != HN_NO_COMP) - dbgprintf("hostname: %s '%s'\n", + DBGPRINTF("hostname: %s '%s'\n", f->eHostnameCmpMode == HN_COMP_MATCH ? "only" : "allbut", rsCStrGetSzStrNoNULL(f->pCSHostnameComp)); if(f->f_filter_type == FILTER_PRI) { for (i = 0; i <= LOG_NFACILITIES; i++) - if (f->f_filterData.f_pmask[i] == TABLE_NOPRI) - dbgprintf(" X "); - else - dbgprintf("%2X ", f->f_filterData.f_pmask[i]); + if (f->f_filterData.f_pmask[i] == TABLE_NOPRI) { + DBGPRINTF(" X "); + } else { + DBGPRINTF("%2X ", f->f_filterData.f_pmask[i]); + } } else if(f->f_filter_type == FILTER_EXPR) { - dbgprintf("EXPRESSION-BASED Filter: can currently not be displayed"); + DBGPRINTF("EXPRESSION-BASED Filter: can currently not be displayed"); } else { - dbgprintf("PROPERTY-BASED Filter:\n"); - dbgprintf("\tProperty.: '%s'\n", + DBGPRINTF("PROPERTY-BASED Filter:\n"); + DBGPRINTF("\tProperty.: '%s'\n", rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSPropName)); - dbgprintf("\tOperation: "); + DBGPRINTF("\tOperation: "); if(f->f_filterData.prop.isNegated) - dbgprintf("NOT "); - dbgprintf("'%s'\n", getFIOPName(f->f_filterData.prop.operation)); - dbgprintf("\tValue....: '%s'\n", + DBGPRINTF("NOT "); + DBGPRINTF("'%s'\n", getFIOPName(f->f_filterData.prop.operation)); + DBGPRINTF("\tValue....: '%s'\n", rsCStrGetSzStrNoNULL(f->f_filterData.prop.pCSCompValue)); - dbgprintf("\tAction...: "); + DBGPRINTF("\tAction...: "); } - dbgprintf("\nActions:\n"); + DBGPRINTF("\nActions:\n"); llExecFunc(&f->llActList, dbgPrintInitInfoAction, NULL); /* actions */ - dbgprintf("\n"); + DBGPRINTF("\n"); } - dbgprintf("\n"); + DBGPRINTF("\n"); if(bDebugPrintTemplateList) tplPrintList(); if(bDebugPrintModuleList) @@ -2169,37 +2517,35 @@ static void dbgPrintInitInfo(void) if(bDebugPrintCfSysLineHandlerList) dbgPrintCfSysLineHandlers(); - dbgprintf("Messages with malicious PTR DNS Records are %sdropped.\n", + DBGPRINTF("Messages with malicious PTR DNS Records are %sdropped.\n", glbl.GetDropMalPTRMsgs() ? "" : "not "); - dbgprintf("Control characters are %sreplaced upon reception.\n", + DBGPRINTF("Control characters are %sreplaced upon reception.\n", bEscapeCCOnRcv? "" : "not "); if(bEscapeCCOnRcv) - dbgprintf("Control character escape sequence prefix is '%c'.\n", + DBGPRINTF("Control character escape sequence prefix is '%c'.\n", cCCEscapeChar); - dbgprintf("Main queue size %d messages.\n", iMainMsgQueueSize); - dbgprintf("Main queue worker threads: %d, Perists every %d updates.\n", - iMainMsgQueueNumWorkers, iMainMsgQPersistUpdCnt); - dbgprintf("Main queue timeouts: shutdown: %d, action completion shutdown: %d, enq: %d\n", + DBGPRINTF("Main queue size %d messages.\n", iMainMsgQueueSize); + DBGPRINTF("Main queue worker threads: %d, wThread shutdown: %d, Perists every %d updates.\n", + iMainMsgQueueNumWorkers, iMainMsgQtoWrkShutdown, iMainMsgQPersistUpdCnt); + DBGPRINTF("Main queue timeouts: shutdown: %d, action completion shutdown: %d, enq: %d\n", iMainMsgQtoQShutdown, iMainMsgQtoActShutdown, iMainMsgQtoEnq); - dbgprintf("Main queue watermarks: high: %d, low: %d, discard: %d, discard-severity: %d\n", + DBGPRINTF("Main queue watermarks: high: %d, low: %d, discard: %d, discard-severity: %d\n", iMainMsgQHighWtrMark, iMainMsgQLowWtrMark, iMainMsgQDiscardMark, iMainMsgQDiscardSeverity); - dbgprintf("Main queue save on shutdown %d, max disk space allowed %lld\n", + DBGPRINTF("Main queue save on shutdown %d, max disk space allowed %lld\n", bMainMsgQSaveOnShutdown, iMainMsgQueMaxDiskSpace); /* TODO: add iActionRetryCount = 0; iActionRetryInterval = 30000; - static int iMainMsgQtoWrkShutdown = 60000; static int iMainMsgQtoWrkMinMsgs = 100; static int iMainMsgQbSaveOnShutdown = 1; iMainMsgQueMaxDiskSpace = 0; - setQPROP(queueSettoWrkShutdown, "$MainMsgQueueTimeoutWorkerThreadShutdown", 5000); - setQPROP(queueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", 100); - setQPROP(queueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", 1); + setQPROP(qqueueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", 100); + setQPROP(qqueueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", 1); */ - dbgprintf("Work Directory: '%s'.\n", glbl.GetWorkDir()); + DBGPRINTF("Work Directory: '%s'.\n", glbl.GetWorkDir()); } @@ -2222,7 +2568,7 @@ startInputModules(void) /* activate here */ thrdCreate(pMod->mod.im.runInput, pMod->mod.im.afterRun); } else { - dbgprintf("module %lx will not run, iRet %d\n", (unsigned long) pMod, iRet); + DBGPRINTF("module %lx will not run, iRet %d\n", (unsigned long) pMod, iRet); } pMod = module.GetNxtType(pMod, eMOD_IN); } @@ -2255,12 +2601,12 @@ init(void) pDfltProgNameCmp = NULL; eDfltHostnameCmpMode = HN_NO_COMP; - dbgprintf("rsyslog %s - called init()\n", VERSION); + DBGPRINTF("rsyslog %s - called init()\n", VERSION); /* delete the message queue, which also flushes all messages left over */ if(pMsgQueue != NULL) { - dbgprintf("deleting main message queue\n"); - queueDestruct(&pMsgQueue); /* delete pThis here! */ + DBGPRINTF("deleting main message queue\n"); + qqueueDestruct(&pMsgQueue); /* delete pThis here! */ pMsgQueue = NULL; } @@ -2270,10 +2616,10 @@ init(void) freeSelectors(); /* Unload all non-static modules */ - dbgprintf("Unloading non-static modules.\n"); + DBGPRINTF("Unloading non-static modules.\n"); module.UnloadAndDestructAll(eMOD_LINK_DYNAMIC_LOADED); - dbgprintf("Clearing templates.\n"); + DBGPRINTF("Clearing templates.\n"); tplDeleteNew(); /* re-setting values to defaults (where applicable) */ @@ -2323,7 +2669,7 @@ init(void) snprintf(cbuf,sizeof(cbuf), "*.*\t%s", szTTYNameBuf); conf.cfline((uchar*)cbuf, &f); } else { - dbgprintf("error %d obtaining controlling terminal, not using that emergency rule\n", errno); + DBGPRINTF("error %d obtaining controlling terminal, not using that emergency rule\n", errno); } selectorAddList(f); } @@ -2361,6 +2707,10 @@ init(void) } } + /* check if we need to generate a config DAG and, if so, do that */ + if(pszConfDAGFile != NULL) + generateConfigDAG(pszConfDAGFile); + /* we are done checking the config - now validate if we should actually run or not. * If not, terminate. -- rgerhards, 2008-07-25 */ @@ -2378,7 +2728,7 @@ init(void) } /* create message queue */ - CHKiRet_Hdlr(queueConstruct(&pMsgQueue, MainMsgQueType, iMainMsgQueueNumWorkers, iMainMsgQueueSize, msgConsumer)) { + CHKiRet_Hdlr(qqueueConstruct(&pMsgQueue, MainMsgQueType, iMainMsgQueueNumWorkers, iMainMsgQueueSize, msgConsumer)) { /* no queue is fatal, we need to give up in that case... */ fprintf(stderr, "fatal error %d: could not create message queue - rsyslogd can not run!\n", iRet); exit(1); @@ -2396,36 +2746,36 @@ init(void) errmsg.LogError(0, NO_ERRCODE, "Invalid " #directive ", error %d. Ignored, running with default setting", iRet); \ } - setQPROP(queueSetMaxFileSize, "$MainMsgQueueFileSize", iMainMsgQueMaxFileSize); - setQPROP(queueSetsizeOnDiskMax, "$MainMsgQueueMaxDiskSpace", iMainMsgQueMaxDiskSpace); - setQPROPstr(queueSetFilePrefix, "$MainMsgQueueFileName", pszMainMsgQFName); - setQPROP(queueSetiPersistUpdCnt, "$MainMsgQueueCheckpointInterval", iMainMsgQPersistUpdCnt); - setQPROP(queueSettoQShutdown, "$MainMsgQueueTimeoutShutdown", iMainMsgQtoQShutdown ); - setQPROP(queueSettoActShutdown, "$MainMsgQueueTimeoutActionCompletion", iMainMsgQtoActShutdown); - setQPROP(queueSettoWrkShutdown, "$MainMsgQueueWorkerTimeoutThreadShutdown", iMainMsgQtoWrkShutdown); - setQPROP(queueSettoEnq, "$MainMsgQueueTimeoutEnqueue", iMainMsgQtoEnq); - setQPROP(queueSetiHighWtrMrk, "$MainMsgQueueHighWaterMark", iMainMsgQHighWtrMark); - setQPROP(queueSetiLowWtrMrk, "$MainMsgQueueLowWaterMark", iMainMsgQLowWtrMark); - setQPROP(queueSetiDiscardMrk, "$MainMsgQueueDiscardMark", iMainMsgQDiscardMark); - setQPROP(queueSetiDiscardSeverity, "$MainMsgQueueDiscardSeverity", iMainMsgQDiscardSeverity); - setQPROP(queueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", iMainMsgQWrkMinMsgs); - setQPROP(queueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", bMainMsgQSaveOnShutdown); - setQPROP(queueSetiDeqSlowdown, "$MainMsgQueueDequeueSlowdown", iMainMsgQDeqSlowdown); - setQPROP(queueSetiDeqtWinFromHr, "$MainMsgQueueDequeueTimeBegin", iMainMsgQueueDeqtWinFromHr); - setQPROP(queueSetiDeqtWinToHr, "$MainMsgQueueDequeueTimeEnd", iMainMsgQueueDeqtWinToHr); + setQPROP(qqueueSetMaxFileSize, "$MainMsgQueueFileSize", iMainMsgQueMaxFileSize); + setQPROP(qqueueSetsizeOnDiskMax, "$MainMsgQueueMaxDiskSpace", iMainMsgQueMaxDiskSpace); + setQPROPstr(qqueueSetFilePrefix, "$MainMsgQueueFileName", pszMainMsgQFName); + setQPROP(qqueueSetiPersistUpdCnt, "$MainMsgQueueCheckpointInterval", iMainMsgQPersistUpdCnt); + setQPROP(qqueueSettoQShutdown, "$MainMsgQueueTimeoutShutdown", iMainMsgQtoQShutdown ); + setQPROP(qqueueSettoActShutdown, "$MainMsgQueueTimeoutActionCompletion", iMainMsgQtoActShutdown); + setQPROP(qqueueSettoWrkShutdown, "$MainMsgQueueWorkerTimeoutThreadShutdown", iMainMsgQtoWrkShutdown); + setQPROP(qqueueSettoEnq, "$MainMsgQueueTimeoutEnqueue", iMainMsgQtoEnq); + setQPROP(qqueueSetiHighWtrMrk, "$MainMsgQueueHighWaterMark", iMainMsgQHighWtrMark); + setQPROP(qqueueSetiLowWtrMrk, "$MainMsgQueueLowWaterMark", iMainMsgQLowWtrMark); + setQPROP(qqueueSetiDiscardMrk, "$MainMsgQueueDiscardMark", iMainMsgQDiscardMark); + setQPROP(qqueueSetiDiscardSeverity, "$MainMsgQueueDiscardSeverity", iMainMsgQDiscardSeverity); + setQPROP(qqueueSetiMinMsgsPerWrkr, "$MainMsgQueueWorkerThreadMinimumMessages", iMainMsgQWrkMinMsgs); + setQPROP(qqueueSetbSaveOnShutdown, "$MainMsgQueueSaveOnShutdown", bMainMsgQSaveOnShutdown); + setQPROP(qqueueSetiDeqSlowdown, "$MainMsgQueueDequeueSlowdown", iMainMsgQDeqSlowdown); + setQPROP(qqueueSetiDeqtWinFromHr, "$MainMsgQueueDequeueTimeBegin", iMainMsgQueueDeqtWinFromHr); + setQPROP(qqueueSetiDeqtWinToHr, "$MainMsgQueueDequeueTimeEnd", iMainMsgQueueDeqtWinToHr); # undef setQPROP # undef setQPROPstr /* ... and finally start the queue! */ - CHKiRet_Hdlr(queueStart(pMsgQueue)) { + CHKiRet_Hdlr(qqueueStart(pMsgQueue)) { /* no queue is fatal, we need to give up in that case... */ fprintf(stderr, "fatal error %d: could not start message queue - rsyslogd can not run!\n", iRet); exit(1); } bHaveMainQueue = (MainMsgQueType == QUEUETYPE_DIRECT) ? 0 : 1; - dbgprintf("Main processing queue is initialized and running\n"); + DBGPRINTF("Main processing queue is initialized and running\n"); /* the output part and the queue is now ready to run. So it is a good time * to start the inputs. Please note that the net code above should be @@ -2452,7 +2802,7 @@ init(void) sigAct.sa_handler = sighup_handler; sigaction(SIGHUP, &sigAct, NULL); - dbgprintf(" (re)started.\n"); + DBGPRINTF(" (re)started.\n"); finalize_it: RETiRet; @@ -2483,7 +2833,7 @@ selectorAddList(selector_t *f) selectorDestruct(f); } else { /* successfully created an entry */ - dbgprintf("selector line successfully processed\n"); + DBGPRINTF("selector line successfully processed\n"); /* TODO: we should use the linked list class for the selector list, else we need to add globals * ... well nextp could be added temporarily... * Thanks to varmojfekoj for having the idea to just use "Files" to make this @@ -2515,16 +2865,16 @@ static rsRetVal setMainMsgQueType(void __attribute__((unused)) *pVal, uchar *psz if (!strcasecmp((char *) pszType, "fixedarray")) { MainMsgQueType = QUEUETYPE_FIXED_ARRAY; - dbgprintf("main message queue type set to FIXED_ARRAY\n"); + DBGPRINTF("main message queue type set to FIXED_ARRAY\n"); } else if (!strcasecmp((char *) pszType, "linkedlist")) { MainMsgQueType = QUEUETYPE_LINKEDLIST; - dbgprintf("main message queue type set to LINKEDLIST\n"); + DBGPRINTF("main message queue type set to LINKEDLIST\n"); } else if (!strcasecmp((char *) pszType, "disk")) { MainMsgQueType = QUEUETYPE_DISK; - dbgprintf("main message queue type set to DISK\n"); + DBGPRINTF("main message queue type set to DISK\n"); } else if (!strcasecmp((char *) pszType, "direct")) { MainMsgQueType = QUEUETYPE_DIRECT; - dbgprintf("main message queue type set to DIRECT (no queueing at all)\n"); + DBGPRINTF("main message queue type set to DIRECT (no queueing at all)\n"); } else { errmsg.LogError(0, RS_RET_INVALID_PARAMS, "unknown mainmessagequeuetype parameter: %s", (char *) pszType); iRet = RS_RET_INVALID_PARAMS; @@ -2539,20 +2889,18 @@ static rsRetVal setMainMsgQueType(void __attribute__((unused)) *pVal, uchar *psz * The following function is resposible for handling a SIGHUP signal. Since * we are now doing mallocs/free as part of init we had better not being * doing this during a signal handler. Instead this function simply sets - * a flag variable which will tell the main loop to go through a restart. + * a flag variable which will tells the main loop to do "the right thing". */ void sighup_handler() { struct sigaction sigAct; - restart = 1; + bHadHUP = 1; memset(&sigAct, 0, sizeof (sigAct)); sigemptyset(&sigAct.sa_mask); sigAct.sa_handler = sighup_handler; sigaction(SIGHUP, &sigAct, NULL); - - return; } @@ -2574,6 +2922,49 @@ static void processImInternal(void) } +/* helper to doHUP(), this "HUPs" each action. The necessary locking + * is done inside the action class and nothing we need to take care of. + * rgerhards, 2008-10-22 + */ +DEFFUNC_llExecFunc(doHUPActions) +{ + BEGINfunc + actionCallHUPHdlr((action_t*) pData); + ENDfunc + return RS_RET_OK; /* we ignore errors, we can not do anything either way */ +} + + +/* This function processes a HUP after one has been detected. Note that this + * is *NOT* the sighup handler. The signal is recorded by the handler, that record + * detected inside the mainloop and then this function is called to do the + * real work. -- rgerhards, 2008-10-22 + */ +static inline void +doHUP(void) +{ + selector_t *f; + char buf[512]; + + snprintf(buf, sizeof(buf) / sizeof(char), + " [origin software=\"rsyslogd\" " "swVersion=\"" VERSION + "\" x-pid=\"%d\" x-info=\"http://www.rsyslog.com\"] rsyslogd was HUPed, type '%s'.", + (int) myPid, glbl.GetHUPisRestart() ? "restart" : "lightweight"); + errno = 0; + logmsgInternal(NO_ERRCODE, LOG_SYSLOG|LOG_INFO, (uchar*)buf, 0); + + if(glbl.GetHUPisRestart()) { + DBGPRINTF("Received SIGHUP, configured to be restart, reloading rsyslogd.\n"); + init(); /* main queue is stopped as part of init() */ + } else { + DBGPRINTF("Received SIGHUP, configured to be a non-restart type of HUP - notifying actions.\n"); + for(f = Files; f != NULL ; f = f->f_next) { + llExecFunc(&f->llActList, doHUPActions, NULL); + } + } +} + + /* This is the main processing loop. It is called after successful initialization. * When it returns, the syslogd terminates. * Its sole function is to provide some housekeeping things. The real work is done @@ -2630,11 +3021,9 @@ mainloop(void) if(bReduceRepeatMsgs == 1) doFlushRptdMsgs(); - if(restart) { - dbgprintf("\nReceived SIGHUP, reloading rsyslogd.\n"); - /* main queue is stopped as part of init() */ - init(); - restart = 0; + if(bHadHUP) { + doHUP(); + bHadHUP = 0; continue; } } @@ -2756,14 +3145,20 @@ static rsRetVal loadBuildInModules(void) CHKiRet(regCfSysLineHdlr((uchar *)"modload", 0, eCmdHdlrCustomHandler, conf.doModLoad, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"includeconfig", 0, eCmdHdlrCustomHandler, conf.doIncludeLine, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"umask", 0, eCmdHdlrFileCreateMode, setUmask, NULL, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"maxopenfiles", 0, eCmdHdlrInt, setMaxFiles, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"debugprinttemplatelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintTemplateList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"debugprintmodulelist", 0, eCmdHdlrBinary, NULL, &bDebugPrintModuleList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"debugprintcfsyslinehandlerlist", 0, eCmdHdlrBinary, NULL, &bDebugPrintCfSysLineHandlerList, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"moddir", 0, eCmdHdlrGetWord, NULL, &pModDir, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"generateconfiggraph", 0, eCmdHdlrGetWord, NULL, &pszConfDAGFile, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"errormessagestostderr", 0, eCmdHdlrBinary, NULL, &bErrMsgToStderr, NULL)); CHKiRet(regCfSysLineHdlr((uchar *)"maxmessagesize", 0, eCmdHdlrSize, setMaxMsgSize, NULL, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"privdroptouser", 0, eCmdHdlrUID, NULL, &uidDropPriv, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"privdroptouserid", 0, eCmdHdlrInt, NULL, &uidDropPriv, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"privdroptogroup", 0, eCmdHdlrGID, NULL, &gidDropPriv, NULL)); + CHKiRet(regCfSysLineHdlr((uchar *)"privdroptogroupid", 0, eCmdHdlrGID, NULL, &gidDropPriv, NULL)); /* now add other modules handlers (we should work on that to be able to do it in ClassInit(), but so far * that is not possible). -- rgerhards, 2008-01-28 @@ -2858,12 +3253,30 @@ static rsRetVal mainThread() CHKiRet(init()); if(Debug && debugging_on) { - dbgprintf("Debugging enabled, SIGUSR1 to turn off debugging.\n"); + DBGPRINTF("Debugging enabled, SIGUSR1 to turn off debugging.\n"); } /* Send a signal to the parent so it can terminate. */ - if (myPid != ppid) - kill (ppid, SIGTERM); + if(myPid != ppid) + kill(ppid, SIGTERM); + + + /* If instructed to do so, we now drop privileges. Note that this is not 100% secure, + * because inputs and outputs are already running at this time. However, we can implement + * dropping of privileges rather quickly and it will work in many cases. While it is not + * the ultimate solution, the current one is still much better than not being able to + * drop privileges at all. Doing it correctly, requires a change in architecture, which + * we should do over time. TODO -- rgerhards, 2008-11-19 + */ + if(gidDropPriv != 0) { + doDropPrivGid(gidDropPriv); + glbl.SetHUPisRestart(0); /* we can not do restart-type HUPs with dropped privs */ + } + + if(uidDropPriv != 0) { + doDropPrivUid(uidDropPriv); + glbl.SetHUPisRestart(0); /* we can not do restart-type HUPs with dropped privs */ + } /* END OF INTIALIZATION * ... but keep in mind that we might do a restart and thus init() might @@ -2871,7 +3284,20 @@ static rsRetVal mainThread() * do the init() and then restart things. * rgerhards, 2005-10-24 */ - dbgprintf("initialization completed, transitioning to regular run mode\n"); + DBGPRINTF("initialization completed, transitioning to regular run mode\n"); + + /* close stderr and stdout if they are kept open during a fork. Note that this + * may introduce subtle security issues: if we are in a jail, one may break out of + * it via these descriptors. But if I close them earlier, error messages will (once + * again) not be emitted to the user that starts the daemon. As root jail support + * is still in its infancy (and not really done), we currently accept this issue. + * rgerhards, 2009-06-29 + */ + if(!(Debug || NoFork)) { + close(1); + close(2); + bErrMsgToStderr = 0; + } mainloop(); @@ -2918,6 +3344,8 @@ InitGlobalClasses(void) CHKiRet(actionClassInit()); pErrObj = "template"; CHKiRet(templateInit()); + pErrObj = "parser"; + CHKiRet(parserClassInit()); /* TODO: the dependency on net shall go away! -- rgerhards, 2008-03-07 */ pErrObj = "net"; @@ -2952,6 +3380,7 @@ GlobalClassExit(void) objRelease(net, LM_NET_FILENAME);/* TODO: the dependency on net shall go away! -- rgerhards, 2008-03-07 */ objRelease(conf, CORE_COMPONENT); objRelease(expr, CORE_COMPONENT); + vmClassExit(); /* this is hack, currently core_modules do not get this automatically called */ objRelease(vm, CORE_COMPONENT); objRelease(var, CORE_COMPONENT); objRelease(datetime, CORE_COMPONENT); @@ -2963,7 +3392,7 @@ GlobalClassExit(void) CHKiRet(strmClassInit(NULL)); CHKiRet(wtiClassInit(NULL)); CHKiRet(wtpClassInit(NULL)); - CHKiRet(queueClassInit(NULL)); + CHKiRet(qqueueClassInit(NULL)); CHKiRet(vmstkClassInit(NULL)); CHKiRet(sysvarClassInit(NULL)); CHKiRet(vmClassInit(NULL)); @@ -3075,7 +3504,7 @@ doGlblProcessInit(void) if( !(Debug || NoFork) ) { - dbgprintf("Checking pidfile.\n"); + DBGPRINTF("Checking pidfile.\n"); if (!check_pid(PidFile)) { memset(&sigAct, 0, sizeof (sigAct)); @@ -3113,7 +3542,7 @@ doGlblProcessInit(void) } /* tuck my process id away */ - dbgprintf("Writing pidfile %s.\n", PidFile); + DBGPRINTF("Writing pidfile %s.\n", PidFile); if (!check_pid(PidFile)) { if (!write_pid(PidFile)) @@ -3173,6 +3602,7 @@ int realMain(int argc, char **argv) uchar legacyConfLine[80]; uchar *LocalHostName; uchar *LocalDomain; + uchar *LocalFQDNName; /* first, parse the command line options. We do not carry out any actual work, just * see what we should do. This relieves us from certain anomalies and we can process @@ -3188,7 +3618,7 @@ int realMain(int argc, char **argv) * only when actually neeeded. * rgerhards, 2008-04-04 */ - while((ch = getopt(argc, argv, "46a:Ac:def:g:hi:l:m:M:nN:op:qQr::s:t:u:vwx")) != EOF) { + while((ch = getopt(argc, argv, "46a:Ac:def:g:hi:l:m:M:nN:op:qQr::s:t:T:u:vwx")) != EOF) { switch((char)ch) { case '4': case '6': @@ -3206,6 +3636,7 @@ int realMain(int argc, char **argv) case 'q': /* add hostname if DNS resolving has failed */ case 'Q': /* dont resolve hostnames in ACL to IPs */ case 's': + case 'T': /* chroot on startup (primarily for testing) */ case 'u': /* misc user settings */ case 'w': /* disable disallowed host warnings */ case 'x': /* disable dns for remote messages */ @@ -3257,7 +3688,7 @@ int realMain(int argc, char **argv) if ((argc -= optind)) usage(); - dbgprintf("rsyslogd %s startup, compatibility mode %d, module path '%s'\n", + DBGPRINTF("rsyslogd %s startup, compatibility mode %d, module path '%s'\n", VERSION, iCompatibilityMode, glblModPath == NULL ? "" : (char*)glblModPath); /* we are done with the initial option parsing and processing. Now we init the system. */ @@ -3277,7 +3708,9 @@ int realMain(int argc, char **argv) /* get our host and domain names - we need to do this early as we may emit * error log messages, which need the correct hostname. -- rgerhards, 2008-04-04 */ - net.getLocalHostname(&LocalHostName); + net.getLocalHostname(&LocalFQDNName); + CHKmalloc(LocalHostName = (uchar*) strdup((char*)LocalFQDNName)); + glbl.SetLocalFQDNName(LocalFQDNName); /* set the FQDN before we modify it */ if((p = (uchar*)strchr((char*)LocalHostName, '.'))) { *p++ = '\0'; LocalDomain = p; @@ -3337,7 +3770,7 @@ int realMain(int argc, char **argv) /* END core initializations - we now come back to carrying out command line options*/ while((iRet = bufOptRemove(&ch, &arg)) == RS_RET_OK) { - dbgprintf("deque option %c, optarg '%s'\n", ch, arg); + DBGPRINTF("deque option %c, optarg '%s'\n", ch, (arg == NULL) ? "" : arg); switch((char)ch) { case '4': glbl.SetDefPFFamily(PF_INET); @@ -3448,6 +3881,12 @@ int realMain(int argc, char **argv) } else fprintf(stderr, "-t option only supported in compatibility modes 0 to 2 - ignored\n"); break; + case 'T':/* chroot() immediately at program startup, but only for testing, NOT security yet */ + if(chroot(arg) != 0) { + perror("chroot"); + exit(1); + } + break; case 'u': /* misc user settings */ iHelperUOpt = atoi(arg); if(iHelperUOpt & 0x01) @@ -3482,11 +3921,14 @@ int realMain(int argc, char **argv) /* process compatibility mode settings */ - if(iCompatibilityMode < 3) { + if(iCompatibilityMode < 4) { errmsg.LogError(0, NO_ERRCODE, "WARNING: rsyslogd is running in compatibility mode. Automatically " "generated config directives may interfer with your rsyslog.conf settings. " - "We suggest upgrading your config and adding -c3 as the first " + "We suggest upgrading your config and adding -c4 as the first " "rsyslogd option."); + } + + if(iCompatibilityMode < 3) { if(MarkInterval > 0) { legacyOptsEnq((uchar *) "ModLoad immark"); snprintf((char *) legacyConfLine, sizeof(legacyConfLine), "MarkMessagePeriod %d", MarkInterval); @@ -3538,6 +3980,5 @@ int main(int argc, char **argv) dbgClassInit(); return realMain(argc, argv); } - /* vim:set ai: */ diff --git a/tools/syslogd.h b/tools/syslogd.h index e866a16b..8b9bd131 100644 --- a/tools/syslogd.h +++ b/tools/syslogd.h @@ -70,8 +70,10 @@ struct filed { FIOP_CONTAINS = 1, /* contains string? */ FIOP_ISEQUAL = 2, /* is (exactly) equal? */ FIOP_STARTSWITH = 3, /* starts with a string? */ - FIOP_REGEX = 4 /* matches a regular expression? */ + FIOP_REGEX = 4, /* matches a (BRE) regular expression? */ + FIOP_EREREGEX = 5 /* matches a ERE regular expression? */ } operation; + regex_t *regex_cache; /* cache for compiled REs, if such are used */ cstr_t *pCSCompValue; /* value to "compare" against */ char isNegated; /* actually a boolean ;) */ } prop; |
