moved files to the runtime

there are still some files left which could go into the
runtime, but I think we will delete most of them once we
are done with the full modularization.

1 files changed, 0 insertions, 270 deletions

diff --git a/rsyslog.h b/rsyslog.h
deleted file mode 100644
index c73c659c..00000000
--- a/rsyslog.h
+++ /dev/null
@@ -1,270 +0,0 @@
-/* Header file with global definitions for the whole
- * rsyslog project (including all subprojects like
- * rfc3195d).
- * Begun 2005-09-15 RGerhards
- *
- * Copyright (C) 2005 by Rainer Gerhards and Adiscon GmbH
- *
- * This file is part of rsyslog.
- *
- * Rsyslog is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * Rsyslog is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with Rsyslog.  If not, see <http://www.gnu.org/licenses/>.
- *
- * A copy of the GPL can be found in the file "COPYING" in this distribution.
-*/
-#ifndef INCLUDED_RSYSLOG_H
-#define INCLUDED_RSYSLOG_H
-
-/* ############################################################# *
- * #                    Config Settings                        # *
- * ############################################################# */
-#define RS_STRINGBUF_ALLOC_INCREMENT 128
-
-/* ############################################################# *
- * #                  End Config Settings                      # *
- * ############################################################# */
-
-#ifndef	NOLARGEFILE
-#	undef _LARGEFILE_SOURCE  
-#	undef _LARGEFILE64_SOURCE  
-#	undef _FILE_OFFSET_BITS
-#	define _LARGEFILE_SOURCE  
-#	define _LARGEFILE64_SOURCE  
-#	define _FILE_OFFSET_BITS 64
-#endif
-
-
-/* some universal 64 bit define... */
-typedef long long int64;
-typedef long long unsigned uint64;
-typedef int64 number_t; /* type to use for numbers - TODO: maybe an autoconf option? */
-
-#ifdef __hpux
-typedef unsigned int u_int32_t; /* TODO: is this correct? */
-typedef int socklen_t;
-#endif
-
-/* settings for flow control
- * TODO: is there a better place for them? -- rgerhards, 2008-03-14
- */
-typedef enum {
-	eFLOWCTL_NO_DELAY = 0,		/**< UDP and other non-delayable sources */
-	eFLOWCTL_LIGHT_DELAY = 1,	/**< some light delay possible, but no extended period of time */
-	eFLOWCTL_FULL_DELAY = 2	/**< delay possible for extended period of time */
-} flowControl_t;
-
-
-/* The error codes below are orginally "borrowed" from
- * liblogging. As such, we reserve values up to -2999
- * just in case we need to borrow something more ;)
-*/
-enum rsRetVal_				/** return value. All methods return this if not specified otherwise */
-{
-	RS_RET_NOT_IMPLEMENTED = -7,	/**< implementation is missing (probably internal error or lazyness ;)) */
-	RS_RET_OUT_OF_MEMORY = -6,	/**< memory allocation failed */
-	RS_RET_PROVIDED_BUFFER_TOO_SMALL = -50,/**< the caller provided a buffer, but the called function sees the size of this buffer is too small - operation not carried out */
-	RS_RET_TRUE = -1,		/**< to indicate a true state (can be used as TRUE, legacy) */
-	RS_RET_FALSE = -2,		/**< to indicate a false state (can be used as FALSE, legacy) */
-	RS_RET_NO_IRET = -8,	/**< This is a trick for the debuging system - it means no iRet is provided  */
-	RS_RET_ERR = -3000,	/**< generic failure */
-	RS_TRUNCAT_TOO_LARGE = -3001, /**< truncation operation where too many chars should be truncated */
-	RS_RET_FOUND_AT_STRING_END = -3002, /**< some value found, but at the last pos of string */
-	RS_RET_NOT_FOUND = -3003, /**< some requested value not found */
-	RS_RET_MISSING_TRAIL_QUOTE = -3004, /**< an expected trailing quote is missing */
-	RS_RET_NO_DIGIT = -3005,	/**< an digit was expected, but none found (mostly parsing) */
-	RS_RET_NO_MORE_DATA = -3006,	/**< insufficient data, e.g. end of string during parsing */
-	RS_RET_INVALID_IP = -3007,	/**< invalid ip found where valid was expected */
-	RS_RET_OBJ_CREATION_FAILED = - 3008, /**< the creation of an object failed (no details available) */
-	RS_RET_PARAM_ERROR = -1000,	/**< invalid parameter in call to function */
-	RS_RET_MISSING_INTERFACE = -1001,/**< interface version mismatch, required missing */
-	RS_RET_INVALID_CORE_INTERFACE = -1002,/**< interface provided by host invalid, can not be used */
-	RS_RET_ENTRY_POINT_NOT_FOUND = -1003,/**< a requested entry point was not found */
-	RS_RET_MODULE_ENTRY_POINT_NOT_FOUND = -1004,/**< a entry point requested from a module was not present in it */
-	RS_RET_OBJ_NOT_AVAILABLE = -1005,/**< something could not be completed because the required object is not available*/
-	RS_RET_LOAD_ERROR = -1006,/**< we had an error loading the object/interface and can not continue */
-	RS_RET_MODULE_STILL_REFERENCED = -1007,/**< module could not be unloaded because it still is referenced by someone */
-	RS_RET_OBJ_UNKNOWN = -1008,/**< object is unknown where required */
-	RS_RET_OBJ_NOT_REGISTERED = -1009,/**< tried to unregister an object that is not registered */
-	/* return states for config file processing */
-	RS_RET_NONE = -2000,		/**< some value is not available - not necessarily an error */
-	RS_RET_CONFLINE_UNPROCESSED = -2001,/**< config line was not processed, pass to other module */
-	RS_RET_DISCARDMSG = -2002,	/**< discard message (no error state, processing request!) */
-	RS_RET_INCOMPATIBLE = -2003,	/**< function not compatible with requested feature */
-	RS_RET_NOENTRY = -2004,		/**< do not create an entry for (whatever) - not necessary an error */
-	RS_RET_NO_SQL_STRING = -2005,	/**< string is not suitable for use as SQL */
-	RS_RET_DISABLE_ACTION = -2006,  /**< action requests that it be disabled */
-	RS_RET_SUSPENDED = -2007,  /**< something was suspended, not neccesarily an error */
-	RS_RET_RQD_TPLOPT_MISSING = -2008,/**< a required template option is missing */
-	RS_RET_INVALID_VALUE = -2009,/**< some value is invalid (e.g. user-supplied data) */
-	RS_RET_INVALID_INT = -2010,/**< invalid integer */
-	RS_RET_INVALID_CMD = -2011,/**< invalid command */
-	RS_RET_VAL_OUT_OF_RANGE = -2012, /**< value out of range */
-	RS_RET_FOPEN_FAILURE = -2013,	/**< failure during fopen, for example file not found - see errno */
-	RS_RET_END_OF_LINKEDLIST = -2014,	/**< end of linked list, not an error, but a status */
-	RS_RET_CHAIN_NOT_PERMITTED = -2015, /**< chaining (e.g. of config command handlers) not permitted */
-	RS_RET_INVALID_PARAMS = -2016,/**< supplied parameters are invalid */
-	RS_RET_EMPTY_LIST = -2017, /**< linked list is empty */
-	RS_RET_FINISHED = -2018, /**< some opertion is finished, not an error state */
-	RS_RET_INVALID_SOURCE = -2019, /**< source (address) invalid for some reason */
-	RS_RET_ADDRESS_UNKNOWN = -2020, /**< an address is unknown - not necessarily an error */
-	RS_RET_MALICIOUS_ENTITY = -2021, /**< there is an malicious entity involved */
-	RS_RET_NO_KERNEL_LOGSRC = -2022, /**< no source for kernel logs can be obtained */
-	RS_RET_TCP_SEND_ERROR = -2023, /**< error during TCP send process */
-	RS_RET_GSS_SEND_ERROR = -2024, /**< error during GSS (via TCP) send process */
-	RS_RET_TCP_SOCKCREATE_ERR = -2025, /**< error during creation of TCP socket */
-	RS_RET_GSS_SENDINIT_ERROR = -2024, /**< error during GSS (via TCP) send initialization process */
-	RS_RET_QUEUE_FULL = -2025, /**< queue is full, operation could not be completed */
-	RS_RET_EOF = -2026, /**< end of file reached, not necessarily an error */
-	RS_RET_IO_ERROR = -2027, /**< some kind of IO error happened */
-	RS_RET_INVALID_OID = -2028, /**< invalid object ID */
-	RS_RET_INVALID_HEADER = -2029, /**< invalid header */
-	RS_RET_INVALID_HEADER_VERS = -2030, /**< invalid header version */
-	RS_RET_INVALID_DELIMITER = -2031, /**< invalid delimiter, e.g. between params */
-	RS_RET_INVALID_PROPFRAME = -2032, /**< invalid framing in serialized property */
-	RS_RET_NO_PROPLINE = -2033, /**< line is not a property line */
-	RS_RET_INVALID_TRAILER = -2034, /**< invalid trailer */
-	RS_RET_VALUE_TOO_LOW = -2035, /**< a provided value is too low */
-	RS_RET_FILE_PREFIX_MISSING = -2036, /**< a required file prefix (parameter?) is missing */
-	RS_RET_INVALID_HEADER_RECTYPE = -2037, /**< invalid record type in header or invalid header */
-	RS_RET_QTYPE_MISMATCH = -2038, /**< different qType when reading back a property type */
-	RS_RET_NO_FILE_ACCESS = -2039, /**< covers EACCES error on file open() */
-	RS_RET_FILE_NOT_FOUND = -2040, /**< file not found */
-	RS_RET_TIMED_OUT = -2041, /**< timeout occured (not necessarily an error) */
-	RS_RET_QSIZE_ZERO = -2042, /**< queue size is zero where this is not supported */
-	RS_RET_ALREADY_STARTING = -2043, /**< something (a thread?) is already starting - not necessarily an error */
-	RS_RET_NO_MORE_THREADS = -2044, /**< no more threads available, not necessarily an error */
-	RS_RET_NO_FILEPREFIX = -2045, /**< file prefix is not specified where one is needed */
-	RS_RET_CONFIG_ERROR = -2046, /**< there is a problem with the user-provided config settigs */
-	RS_RET_OUT_OF_DESRIPTORS = -2047, /**< a descriptor table's space has been exhausted */
-	RS_RET_NO_DRIVERS = -2048, /**< a required drivers missing */
-	RS_RET_NO_DRIVERNAME = -2049, /**< driver name missing where one was required */
-	RS_RET_EOS = -2050, /**< end of stream (of whatever) */
-	RS_RET_SYNTAX_ERROR = -2051, /**< syntax error, eg. during parsing */
-	RS_RET_INVALID_OCTAL_DIGIT = -2052, /**< invalid octal digit during parsing */
-	RS_RET_INVALID_HEX_DIGIT = -2053, /**< invalid hex digit during parsing */
-	RS_RET_INTERFACE_NOT_SUPPORTED = -2054, /**< interface not supported */
-	RS_RET_OUT_OF_STACKSPACE = -2055, /**< a stack data structure is exhausted and can not be grown */
-	RS_RET_STACK_EMPTY = -2056, /**< a pop was requested on a stack, but the stack was already empty */
-	RS_RET_INVALID_VMOP = -2057, /**< invalid virtual machine instruction */
-	RS_RET_INVALID_VAR = -2058, /**< a var_t or its content is unsuitable, eg. VARTYPE_NONE */
-	RS_RET_INVALID_NUMBER = -2059, /**< number invalid during parsing */
-	RS_RET_NOT_A_NUMBER = -2060, /**< e.g. conversion impossible because the string is not a number */
-	RS_RET_OBJ_ALREADY_REGISTERED = -2061, /**< object (name) is already registered */
-	RS_RET_OBJ_REGISTRY_OUT_OF_SPACE = -2062, /**< the object registry has run out of space */
-	RS_RET_HOST_NOT_PERMITTED = -2063, /**< a host is not permitted to perform an action it requested */
-	RS_RET_MODULE_LOAD_ERR = -2064, /**< module could not be loaded */
-	RS_RET_MODULE_LOAD_ERR_PATHLEN = -2065, /**< module could not be loaded - path to long */
-	RS_RET_MODULE_LOAD_ERR_DLOPEN = -2066, /**< module could not be loaded - problem in dlopen() */
-	RS_RET_MODULE_LOAD_ERR_NO_INIT = -2067, /**< module could not be loaded - init() missing */
-	RS_RET_MODULE_LOAD_ERR_INIT_FAILED = -2068, /**< module could not be loaded - init() failed */
-	RS_RET_NO_SOCKET = -2069, /**< socket could not be obtained or was not provided */
-	RS_RET_SMTP_ERROR = -2070, /**< error during SMTP transation */
-	RS_RET_MAIL_NO_TO = -2071, /**< recipient for mail destination is missing */
-	RS_RET_MAIL_NO_FROM = -2072, /**< sender for mail destination is missing */
-	RS_RET_INVALID_PRI = -2073, /**< PRI value is invalid */
-
-	/* RainerScript error messages (range 1000.. 1999) */
-	RS_RET_SYSVAR_NOT_FOUND = 1001, /**< system variable could not be found (maybe misspelled) */
-
-	/* some generic error/status codes */
-	RS_RET_OK_DELETE_LISTENTRY = 1,	/**< operation successful, but callee requested the deletion of an entry (special state) */
-	RS_RET_TERMINATE_NOW = 2,	/**< operation successful, function is requested to terminate (mostly used with threads) */
-	RS_RET_NO_RUN = 3,		/**< operation successful, but function does not like to be executed */
-	RS_RET_OK = 0			/**< operation successful */
-};
-typedef enum rsRetVal_ rsRetVal; /**< friendly type for global return value */
-
-/* some helpful macros to work with srRetVals.
- * Be sure to call the to-be-returned variable always "iRet" and
- * the function finalizer always "finalize_it".
- */
-#define CHKiRet(code) if((iRet = code) != RS_RET_OK) goto finalize_it
-/* macro below is to be used if we need our own handling, eg for cleanup */
-#define CHKiRet_Hdlr(code) if((iRet = code) != RS_RET_OK)
-/* macro below is to handle failing malloc/calloc/strdup... which we almost always handle in the same way... */
-#define CHKmalloc(operation) if((operation) == NULL) ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY)
-/* macro below is used in conjunction with CHKiRet_Hdlr, else use ABORT_FINALIZE */
-#define FINALIZE goto finalize_it;
-#define DEFiRet BEGINfunc rsRetVal iRet = RS_RET_OK
-#define RETiRet do{ ENDfuncIRet return iRet; }while(0)
-
-#define ABORT_FINALIZE(errCode)			\
-	do {					\
-		iRet = errCode;			\
-		goto finalize_it;		\
-	} while (0)
-
-/** Object ID. These are for internal checking. Each
- * object is assigned a specific ID. This is contained in
- * all Object structs (just like C++ RTTI). We can use 
- * this field to see if we have been passed a correct ID.
- * Other than that, there is currently no other use for
- * the object id.
- */
-enum rsObjectID
-{
-	OIDrsFreed = -1,		/**< assigned, when an object is freed. If this
-				 *   is seen during a method call, this is an
-				 *   invalid object pointer!
-				 */
-	OIDrsInvalid = 0,	/**< value created by calloc(), so do not use ;) */
-	/* The 0x3412 is a debug aid. It helps us find object IDs in memory
-	 * dumps (on X86, this is 1234 in the dump ;)
-	 * If you are on an embedded device and you would like to save space
-	 * make them 1 byte only.
-	 */
-	OIDrsCStr = 0x34120001,
-	OIDrsPars = 0x34120002
-};
-typedef enum rsObjectID rsObjID;
-
-/* support to set object types */
-#ifdef NDEBUG
-#define rsSETOBJTYPE(pObj, type)
-#define rsCHECKVALIDOBJECT(x, type)
-#else
-#define rsSETOBJTYPE(pObj, type) pObj->OID = type;
-#define rsCHECKVALIDOBJECT(x, type) {assert(x != NULL); assert(x->OID == type);}
-#endif
-
-/**
- * This macro should be used to free objects. 
- * It aids in interpreting dumps during debugging.
- */
-#ifdef NDEBUG
-#define RSFREEOBJ(x) free(x)
-#else
-#define RSFREEOBJ(x) {(x)->OID = OIDrsFreed; free(x);}
-#endif
-
-/* get rid of the unhandy "unsigned char"
- */
-typedef unsigned char uchar;
-
-/* for the time being, we do our own portability handling here. It
- * looks like autotools either does not yet support checks for it, or
- * I wasn't smart enough to find them ;) rgerhards, 2007-07-18
- */
-#ifndef __GNUC__
-#  define  __attribute__(x)  /*NOTHING*/
-#endif
-
-/* The following prototype is convenient, even though it may not be the 100% correct place.. -- rgerhards 2008-01-07 */
-void dbgprintf(char *, ...) __attribute__((format(printf, 1, 2)));
-
-#include "debug.h"
-
-#endif /* multi-include protection */
-/*
- * vi:set ai:
- */