omgssapi created

1 files changed, 685 insertions, 0 deletions

diff --git a/plugins/omgssapi/omgssapi.c b/plugins/omgssapi/omgssapi.c
new file mode 100644
index 00000000..7097d742
--- /dev/null
+++ b/plugins/omgssapi/omgssapi.c
@@ -0,0 +1,685 @@
+/* omgssapi.c
+ * This is the implementation of the build-in forwarding output module.
+ *
+ * NOTE: read comments in module-template.h to understand how this file
+ *       works!
+ *
+ * Copyright 2007 Rainer Gerhards and Adiscon GmbH.
+ *
+ * This file is part of rsyslog.
+ *
+ * Rsyslog is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Rsyslog is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Rsyslog.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * A copy of the GPL can be found in the file "COPYING" in this distribution.
+ */
+#include "config.h"
+#ifdef USE_GSSAPI
+#include "rsyslog.h"
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <netinet/in.h>
+#include <netdb.h>
+#include <fnmatch.h>
+#include <assert.h>
+#include <errno.h>
+#include <ctype.h>
+#include <unistd.h>
+#ifdef USE_NETZIP
+#include <zlib.h>
+#endif
+#include <pthread.h>
+#include <gssapi/gssapi.h>
+#include "syslogd.h"
+#include "syslogd-types.h"
+#include "srUtils.h"
+#include "net.h"
+#include "omfwd.h"
+#include "template.h"
+#include "msg.h"
+#include "tcpsyslog.h"
+#include "cfsysline.h"
+#include "module-template.h"
+#include "gss-misc.h"
+
+MODULE_TYPE_OUTPUT
+
+#define INET_SUSPEND_TIME 60		/* equal to 1 minute 
+					 * rgerhards, 2005-07-26: This was 3 minutes. As the
+					 * same timer is used for tcp based syslog, we have
+					 * reduced it. However, it might actually be worth
+					 * thinking about a buffered tcp sender, which would be 
+					 * a much better alternative. When that happens, this
+					 * time here can be re-adjusted to 3 minutes (or,
+					 * even better, made configurable).
+					 */
+#define INET_RETRY_MAX 30		/* maximum of retries for gethostbyname() */
+	/* was 10, changed to 30 because we reduced INET_SUSPEND_TIME by one third. So
+	 * this "fixes" some of implications of it (see comment on INET_SUSPEND_TIME).
+	 * rgerhards, 2005-07-26
+	 */
+
+/* internal structures
+ */
+DEF_OMOD_STATIC_DATA
+
+typedef struct _instanceData {
+	char	f_hname[MAXHOSTNAMELEN+1];
+	short	sock;			/* file descriptor */
+	enum { /* TODO: we shoud revisit these definitions */
+		eDestFORW,
+		eDestFORW_SUSP,
+		eDestFORW_UNKN
+	} eDestState;
+	int iRtryCnt;
+	struct addrinfo *f_addr;
+	int compressionLevel; /* 0 - no compression, else level for zlib */
+	char *port;
+	TCPFRAMINGMODE tcp_framing;
+#	define	FORW_UDP 0
+#	define	FORW_TCP 1
+	/* following fields for TCP-based delivery */
+	time_t	ttSuspend;	/* time selector was suspended */
+	gss_ctx_id_t gss_context;
+	OM_uint32 gss_flags;
+} instanceData;
+
+static char *gss_base_service_name = NULL;
+static enum gss_mode_t {
+	GSSMODE_MIC,
+	GSSMODE_ENC
+} gss_mode = GSSMODE_ENC;
+
+/* get the syslog forward port from selector_t. The passed in
+ * struct must be one that is setup for forwarding.
+ * rgerhards, 2007-06-28
+ * We may change the implementation to try to lookup the port
+ * if it is unspecified. So far, we use the IANA default auf 514.
+ */
+char *getFwdSyslogPt(instanceData *pData)
+{
+	assert(pData != NULL);
+	if(pData->port == NULL)
+		return("514");
+	else
+		return(pData->port);
+}
+
+BEGINcreateInstance
+CODESTARTcreateInstance
+ENDcreateInstance
+
+
+BEGINisCompatibleWithFeature
+CODESTARTisCompatibleWithFeature
+	if(eFeat == sFEATURERepeatedMsgReduction)
+		iRet = RS_RET_OK;
+ENDisCompatibleWithFeature
+
+
+BEGINfreeInstance
+OM_uint32 maj_stat, min_stat;
+CODESTARTfreeInstance
+	switch (pData->eDestState) {
+		case eDestFORW:
+		case eDestFORW_SUSP:
+			freeaddrinfo(pData->f_addr);
+			/* fall through */
+		case eDestFORW_UNKN:
+			if(pData->port != NULL)
+				free(pData->port);
+			break;
+	}
+
+	if (pData->gss_context != GSS_C_NO_CONTEXT) {
+		maj_stat = gss_delete_sec_context(&min_stat, &pData->gss_context, GSS_C_NO_BUFFER);
+		if (maj_stat != GSS_S_COMPLETE)
+			display_status("deleting context", maj_stat, min_stat);
+	}
+	/* this is meant to be done when module is unloaded,
+	   but since this module is static...
+	*/
+	if (gss_base_service_name != NULL) {
+		free(gss_base_service_name);
+		gss_base_service_name = NULL;
+	}
+
+	/* final cleanup */
+	if(pData->sock >= 0)
+		close(pData->sock);
+ENDfreeInstance
+
+
+BEGINdbgPrintInstInfo
+CODESTARTdbgPrintInstInfo
+	printf("%s", pData->f_hname);
+ENDdbgPrintInstInfo
+
+
+/* CODE FOR SENDING TCP MESSAGES */
+
+/* This function is called immediately before a send retry is attempted.
+ * It shall clean up whatever makes sense.
+ * rgerhards, 2007-12-28
+ */
+static rsRetVal TCPSendGSSPrepRetry(void __attribute__((unused)) *pData)
+{
+	/* in case of TCP/GSS, there is nothing to do */
+	return RS_RET_OK;
+}
+
+
+static rsRetVal TCPSendGSSInit(void *pvData)
+{
+	DEFiRet;
+	int s = -1;
+	char *base;
+	OM_uint32 maj_stat, min_stat, init_sec_min_stat, *sess_flags, ret_flags;
+	gss_buffer_desc out_tok, in_tok;
+	gss_buffer_t tok_ptr;
+	gss_name_t target_name;
+	gss_ctx_id_t *context;
+	instanceData *pData = (instanceData *) pvData;
+
+	assert(pData != NULL);
+
+	/* if the socket is already initialized, we are done */
+	if(pData->sock > 0)
+		ABORT_FINALIZE(RS_RET_OK);
+
+	base = (gss_base_service_name == NULL) ? "host" : gss_base_service_name;
+	out_tok.length = strlen(pData->f_hname) + strlen(base) + 2;
+	if ((out_tok.value = malloc(out_tok.length)) == NULL) {
+		ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY);
+	}
+	strcpy(out_tok.value, base);
+	strcat(out_tok.value, "@");
+	strcat(out_tok.value, pData->f_hname);
+	dbgprintf("GSS-API service name: %s\n", (char*) out_tok.value);
+
+	tok_ptr = GSS_C_NO_BUFFER;
+	context = &pData->gss_context;
+	*context = GSS_C_NO_CONTEXT;
+
+	maj_stat = gss_import_name(&min_stat, &out_tok, GSS_C_NT_HOSTBASED_SERVICE, &target_name);
+	free(out_tok.value);
+	out_tok.value = NULL;
+	out_tok.length = 0;
+
+	if (maj_stat != GSS_S_COMPLETE) {
+		display_status("parsing name", maj_stat, min_stat);
+		goto fail;
+	}
+
+	sess_flags = &pData->gss_flags;
+	*sess_flags = GSS_C_MUTUAL_FLAG;
+	if (gss_mode == GSSMODE_MIC) {
+		*sess_flags |= GSS_C_INTEG_FLAG;
+	}
+	if (gss_mode == GSSMODE_ENC) {
+		*sess_flags |= GSS_C_CONF_FLAG;
+	}
+	dbgprintf("GSS-API requested context flags:\n");
+	display_ctx_flags(*sess_flags);
+
+	do {
+		maj_stat = gss_init_sec_context(&init_sec_min_stat, GSS_C_NO_CREDENTIAL, context,
+						target_name, GSS_C_NO_OID, *sess_flags, 0, NULL,
+						tok_ptr, NULL, &out_tok, &ret_flags, NULL);
+		if (tok_ptr != GSS_C_NO_BUFFER)
+			free(in_tok.value);
+
+		if (maj_stat != GSS_S_COMPLETE
+		    && maj_stat != GSS_S_CONTINUE_NEEDED) {
+			display_status("initializing context", maj_stat, init_sec_min_stat);
+			goto fail;
+		}
+
+		if (s == -1)
+			if ((s = pData->sock = TCPSendCreateSocket(pData->f_addr)) == -1)
+				goto fail;
+
+		if (out_tok.length != 0) {
+			dbgprintf("GSS-API Sending init_sec_context token (length: %ld)\n", (long) out_tok.length);
+			if (send_token(s, &out_tok) < 0) {
+				goto fail;
+			}
+		}
+		gss_release_buffer(&min_stat, &out_tok);
+
+		if (maj_stat == GSS_S_CONTINUE_NEEDED) {
+			dbgprintf("GSS-API Continue needed...\n");
+			if (recv_token(s, &in_tok) <= 0) {
+				goto fail;
+			}
+			tok_ptr = &in_tok;
+		}
+	} while (maj_stat == GSS_S_CONTINUE_NEEDED);
+
+	dbgprintf("GSS-API Provided context flags:\n");
+	*sess_flags = ret_flags;
+	display_ctx_flags(*sess_flags);
+
+	dbgprintf("GSS-API Context initialized\n");
+	gss_release_name(&min_stat, &target_name);
+
+finalize_it:
+	return iRet;
+
+ fail:
+	logerror("GSS-API Context initialization failed\n");
+	gss_release_name(&min_stat, &target_name);
+	gss_release_buffer(&min_stat, &out_tok);
+	if (*context != GSS_C_NO_CONTEXT) {
+		gss_delete_sec_context(&min_stat, context, GSS_C_NO_BUFFER);
+		*context = GSS_C_NO_CONTEXT;
+	}
+	if (s != -1)
+		close(s);
+	pData->sock = -1;
+	return RS_RET_GSS_SENDINIT_ERROR;
+}
+
+
+static rsRetVal TCPSendGSSSend(void *pvData, char *msg, size_t len)
+{
+	int s;
+	gss_ctx_id_t *context;
+	OM_uint32 maj_stat, min_stat;
+	gss_buffer_desc in_buf, out_buf;
+	instanceData *pData = (instanceData *) pvData;
+
+	assert(pData != NULL);
+	assert(msg != NULL);
+	assert(len > 0);
+
+	s = pData->sock;
+	context = &pData->gss_context;
+	in_buf.value = msg;
+	in_buf.length = len;
+	maj_stat = gss_wrap(&min_stat, *context, (gss_mode == GSSMODE_ENC) ? 1 : 0, GSS_C_QOP_DEFAULT,
+			    &in_buf, NULL, &out_buf);
+	if (maj_stat != GSS_S_COMPLETE) {
+		display_status("wrapping message", maj_stat, min_stat);
+		goto fail;
+	}
+	
+	if (send_token(s, &out_buf) < 0) {
+		goto fail;
+	}
+	gss_release_buffer(&min_stat, &out_buf);
+
+	return RS_RET_OK;
+
+ fail:
+	close(s);
+	pData->sock = -1;
+	gss_delete_sec_context(&min_stat, context, GSS_C_NO_BUFFER);
+	*context = GSS_C_NO_CONTEXT;
+	gss_release_buffer(&min_stat, &out_buf);
+	dbgprintf("message not (GSS/tcp)send");
+	return RS_RET_GSS_SEND_ERROR;
+}
+
+
+/* try to resume connection if it is not ready
+ * rgerhards, 2007-08-02
+ */
+static rsRetVal doTryResume(instanceData *pData)
+{
+	DEFiRet;
+	struct addrinfo *res;
+	struct addrinfo hints;
+	unsigned e;
+
+	switch (pData->eDestState) {
+	case eDestFORW_SUSP:
+		iRet = RS_RET_OK; /* the actual check happens during doAction() only */
+		pData->eDestState = eDestFORW;
+		break;
+		
+	case eDestFORW_UNKN:
+		/* The remote address is not yet known and needs to be obtained */
+		dbgprintf(" %s\n", pData->f_hname);
+		memset(&hints, 0, sizeof(hints));
+		/* port must be numeric, because config file syntax requests this */
+		/* TODO: this code is a duplicate from cfline() - we should later create
+		 * a common function.
+		 */
+		hints.ai_flags = AI_NUMERICSERV;
+		hints.ai_family = family;
+		hints.ai_socktype = SOCK_STREAM;
+		if((e = getaddrinfo(pData->f_hname,
+				    getFwdSyslogPt(pData), &hints, &res)) == 0) {
+			dbgprintf("%s found, resuming.\n", pData->f_hname);
+			pData->f_addr = res;
+			pData->iRtryCnt = 0;
+			pData->eDestState = eDestFORW;
+		} else {
+			iRet = RS_RET_SUSPENDED;
+		}
+		break;
+	case eDestFORW:
+		/* rgerhards, 2007-09-11: this can not happen, but I've included it to
+		 * a) make the compiler happy, b) detect any logic errors */
+		assert(0);
+		break;
+	}
+
+	return iRet;
+}
+
+
+BEGINtryResume
+CODESTARTtryResume
+	iRet = doTryResume(pData);
+ENDtryResume
+
+BEGINdoAction
+	char *psz; /* temporary buffering */
+	register unsigned l;
+CODESTARTdoAction
+	switch (pData->eDestState) {
+	case eDestFORW_SUSP:
+		dbgprintf("internal error in omgssapi.c, eDestFORW_SUSP in doAction()!\n");
+		iRet = RS_RET_SUSPENDED;
+		break;
+		
+	case eDestFORW_UNKN:
+		dbgprintf("doAction eDestFORW_UNKN\n");
+		iRet = doTryResume(pData);
+		break;
+
+	case eDestFORW:
+		dbgprintf(" %s:%s/%s\n", pData->f_hname, getFwdSyslogPt(pData), "tcp-gssapi");
+		pData->ttSuspend = time(NULL);
+		psz = (char*) ppString[0];
+		l = strlen((char*) psz);
+		if (l > MAXLINE)
+			l = MAXLINE;
+
+#		ifdef	USE_NETZIP
+		/* Check if we should compress and, if so, do it. We also
+		 * check if the message is large enough to justify compression.
+		 * The smaller the message, the less likely is a gain in compression.
+		 * To save CPU cycles, we do not try to compress very small messages.
+		 * What "very small" means needs to be configured. Currently, it is
+		 * hard-coded but this may be changed to a config parameter.
+		 * rgerhards, 2006-11-30
+		 */
+		if(pData->compressionLevel && (l > MIN_SIZE_FOR_COMPRESS)) {
+			Bytef out[MAXLINE+MAXLINE/100+12] = "z";
+			uLongf destLen = sizeof(out) / sizeof(Bytef);
+			uLong srcLen = l;
+			int ret;
+			ret = compress2((Bytef*) out+1, &destLen, (Bytef*) psz,
+					srcLen, pData->compressionLevel);
+			dbgprintf("Compressing message, length was %d now %d, return state  %d.\n",
+				l, (int) destLen, ret);
+			if(ret != Z_OK) {
+				/* if we fail, we complain, but only in debug mode
+				 * Otherwise, we are silent. In any case, we ignore the
+				 * failed compression and just sent the uncompressed
+				 * data, which is still valid. So this is probably the
+				 * best course of action.
+				 * rgerhards, 2006-11-30
+				 */
+				dbgprintf("Compression failed, sending uncompressed message\n");
+			} else if(destLen+1 < l) {
+				/* only use compression if there is a gain in using it! */
+				dbgprintf("there is gain in compression, so we do it\n");
+				psz = (char*) out;
+				l = destLen + 1; /* take care for the "z" at message start! */
+			}
+			++destLen;
+		}
+#		endif
+
+		CHKiRet_Hdlr(TCPSend(pData, psz, l, pData->tcp_framing, TCPSendGSSInit, TCPSendGSSSend, TCPSendGSSPrepRetry)) {
+			/* error! */
+			dbgprintf("error forwarding via tcp, suspending\n");
+			pData->eDestState = eDestFORW_SUSP;
+			iRet = RS_RET_SUSPENDED;
+		}
+		break;
+	}
+ENDdoAction
+
+
+BEGINparseSelectorAct
+	uchar *q;
+	int i;
+        int error;
+	int bErr;
+        struct addrinfo hints, *res;
+CODESTARTparseSelectorAct
+CODE_STD_STRING_REQUESTparseSelectorAct(1)
+	/* first check if this config line is actually for us
+	 * The first test [*p == '>'] can be skipped if a module shall only
+	 * support the newer slection syntax [:modname:]. This is in fact
+	 * recommended for new modules. Please note that over time this part
+	 * will be handled by rsyslogd itself, but for the time being it is
+	 * a good compromise to do it at the module level.
+	 * rgerhards, 2007-10-15
+	 */
+
+	if(!strncmp((char*) p, ":omgssapi:", sizeof(":omgssapi:") - 1)) {
+		p += sizeof(":omgssapi:") - 1; /* eat indicator sequence (-1 because of '\0'!) */
+	} else {
+		ABORT_FINALIZE(RS_RET_CONFLINE_UNPROCESSED);
+	}
+
+	/* ok, if we reach this point, we have something for us */
+	if((iRet = createInstance(&pData)) != RS_RET_OK)
+		goto finalize_it;
+
+	/* we are now after the protocol indicator. Now check if we should
+	 * use compression. We begin to use a new option format for this:
+	 * @(option,option)host:port
+	 * The first option defined is "z[0..9]" where the digit indicates
+	 * the compression level. If it is not given, 9 (best compression) is
+	 * assumed. An example action statement might be:
+	 * @@(z5,o)127.0.0.1:1400  
+	 * Which means send via TCP with medium (5) compresion (z) to the local
+	 * host on port 1400. The '0' option means that octet-couting (as in
+	 * IETF I-D syslog-transport-tls) is to be used for framing (this option
+	 * applies to TCP-based syslog only and is ignored when specified with UDP).
+	 * That is not yet implemented.
+	 * rgerhards, 2006-12-07
+	 */
+	if(*p == '(') {
+		/* at this position, it *must* be an option indicator */
+		do {
+			++p; /* eat '(' or ',' (depending on when called) */
+			/* check options */
+			if(*p == 'z') { /* compression */
+#					ifdef USE_NETZIP
+				++p; /* eat */
+				if(isdigit((int) *p)) {
+					int iLevel;
+					iLevel = *p - '0';
+					++p; /* eat */
+					pData->compressionLevel = iLevel;
+				} else {
+					logerrorInt("Invalid compression level '%c' specified in "
+						 "forwardig action - NOT turning on compression.",
+						 *p);
+				}
+#					else
+				logerror("Compression requested, but rsyslogd is not compiled "
+					 "with compression support - request ignored.");
+#					endif /* #ifdef USE_NETZIP */
+			} else if(*p == 'o') { /* octet-couting based TCP framing? */
+				++p; /* eat */
+				/* no further options settable */
+				pData->tcp_framing = TCP_FRAMING_OCTET_COUNTING;
+			} else { /* invalid option! Just skip it... */
+				logerrorInt("Invalid option %c in forwarding action - ignoring.", *p);
+				++p; /* eat invalid option */
+			}
+			/* the option processing is done. We now do a generic skip
+			 * to either the next option or the end of the option
+			 * block.
+			 */
+			while(*p && *p != ')' && *p != ',')
+				++p;	/* just skip it */
+		} while(*p && *p == ','); /* Attention: do.. while() */
+		if(*p == ')')
+			++p; /* eat terminator, on to next */
+		else
+			/* we probably have end of string - leave it for the rest
+			 * of the code to handle it (but warn the user)
+			 */
+			logerror("Option block not terminated in gssapi forward action.");
+	}
+	/* extract the host first (we do a trick - we replace the ';' or ':' with a '\0')
+	 * now skip to port and then template name. rgerhards 2005-07-06
+	 */
+	for(q = p ; *p && *p != ';' && *p != ':' ; ++p)
+		/* JUST SKIP */;
+
+	pData->port = NULL;
+	if(*p == ':') { /* process port */
+		uchar * tmp;
+
+		*p = '\0'; /* trick to obtain hostname (later)! */
+		tmp = ++p;
+		for(i=0 ; *p && isdigit((int) *p) ; ++p, ++i)
+			/* SKIP AND COUNT */;
+		pData->port = malloc(i + 1);
+		if(pData->port == NULL) {
+			logerror("Could not get memory to store syslog forwarding port, "
+				 "using default port, results may not be what you intend\n");
+			/* we leave f_forw.port set to NULL, this is then handled by
+			 * getFwdSyslogPt().
+			 */
+		} else {
+			memcpy(pData->port, tmp, i);
+			*(pData->port + i) = '\0';
+		}
+	}
+	
+	/* now skip to template */
+	bErr = 0;
+	while(*p && *p != ';') {
+		if(*p && *p != ';' && !isspace((int) *p)) {
+			if(bErr == 0) { /* only 1 error msg! */
+				bErr = 1;
+				errno = 0;
+				logerror("invalid selector line (port), probably not doing "
+					 "what was intended");
+			}
+		}
+		++p;
+	}
+
+	/* TODO: make this if go away! */
+	if(*p == ';') {
+		*p = '\0'; /* trick to obtain hostname (later)! */
+		strcpy(pData->f_hname, (char*) q);
+		*p = ';';
+	} else
+		strcpy(pData->f_hname, (char*) q);
+
+	/* process template */
+	if((iRet = cflineParseTemplateName(&p, *ppOMSR, 0, OMSR_NO_RQD_TPL_OPTS, (uchar*) " StdFwdFmt"))
+	   != RS_RET_OK)
+		goto finalize_it;
+
+	/* first set the pData->eDestState */
+	memset(&hints, 0, sizeof(hints));
+	/* port must be numeric, because config file syntax requests this */
+	hints.ai_flags = AI_NUMERICSERV;
+	hints.ai_family = family;
+	hints.ai_socktype = SOCK_STREAM;
+	if( (error = getaddrinfo(pData->f_hname, getFwdSyslogPt(pData), &hints, &res)) != 0) {
+		pData->eDestState = eDestFORW_UNKN;
+		pData->iRtryCnt = INET_RETRY_MAX;
+		pData->ttSuspend = time(NULL);
+	} else {
+		pData->eDestState = eDestFORW;
+		pData->f_addr = res;
+	}
+
+	/* TODO: do we need to call freeInstance if we failed - this is a general question for
+	 * all output modules. I'll address it lates as the interface evolves. rgerhards, 2007-07-25
+	 */
+CODE_STD_FINALIZERparseSelectorAct
+ENDparseSelectorAct
+
+
+BEGINneedUDPSocket
+CODESTARTneedUDPSocket
+	iRet = RS_RET_TRUE;
+ENDneedUDPSocket
+
+
+BEGINmodExit
+CODESTARTmodExit
+ENDmodExit
+
+
+BEGINqueryEtryPt
+CODESTARTqueryEtryPt
+CODEqueryEtryPt_STD_OMOD_QUERIES
+ENDqueryEtryPt
+
+
+/* set a new GSSMODE based on config directive */
+static rsRetVal setGSSMode(void __attribute__((unused)) *pVal, uchar *mode)
+{
+	if (!strcmp((char *) mode, "integrity")) {
+		gss_mode = GSSMODE_MIC;
+		free(mode);
+		dbgprintf("GSS-API gssmode set to GSSMODE_MIC\n");
+	} else if (!strcmp((char *) mode, "encryption")) {
+		gss_mode = GSSMODE_ENC;
+		free(mode);
+		dbgprintf("GSS-API gssmode set to GSSMODE_ENC\n");
+	} else {
+		logerrorSz("unknown gssmode parameter: %s", (char *) mode);
+		free(mode);
+		return RS_RET_ERR;
+	}
+
+	return RS_RET_OK;
+}
+
+
+static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal)
+{
+	gss_mode = GSSMODE_ENC;
+	if (gss_base_service_name != NULL) {
+		free(gss_base_service_name);
+		gss_base_service_name = NULL;
+	}
+	return RS_RET_OK;
+}
+
+
+BEGINmodInit()
+CODESTARTmodInit
+	*ipIFVersProvided = 1; /* so far, we only support the initial definition */
+CODEmodInit_QueryRegCFSLineHdlr
+	CHKiRet(omsdRegCFSLineHdlr((uchar *)"gssforwardservicename", 0, eCmdHdlrGetWord, NULL, &gss_base_service_name, STD_LOADABLE_MODULE_ID));
+	CHKiRet(omsdRegCFSLineHdlr((uchar *)"gssmode", 0, eCmdHdlrGetWord, setGSSMode, &gss_mode, STD_LOADABLE_MODULE_ID));
+	CHKiRet(omsdRegCFSLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID));
+ENDmodInit
+
+#endif /* #ifdef USE_GSSAPI */
+/*
+ * vi:set ai:
+ */