removed files from cvs that not belong there (thanks to Michael Biebl for

    pointing that out)

3 files changed, 0 insertions, 1108 deletions

diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index 5458714e..00000000
--- a/INSTALL
+++ /dev/null
@@ -1,234 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006 Free Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
-
-     Running `configure' might take a while.  While running, it prints
-     some messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug.  Until the bug is fixed you can use this workaround:
-
-     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
diff --git a/install-sh b/install-sh
deleted file mode 100755
index 4fbbae7b..00000000
--- a/install-sh
+++ /dev/null
@@ -1,507 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        shift
-        shift
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dstarg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
-      shift # fnord
-    fi
-    shift # arg
-    dstarg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
-      esac
-
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob && set -f
-      set fnord $dstdir
-      shift
-      $posix_glob && set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test -z "$d" && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/missing b/missing
deleted file mode 100755
index 1c8ff704..00000000
--- a/missing
+++ /dev/null
@@ -1,367 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2006-05-10.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case $1 in
-  lex|yacc)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $1 in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End: