From ebc3f64b864fc16a594c2e63bf55a55c7d42084b Mon Sep 17 00:00:00 2001 From: Shaun Pereira Date: Wed, 22 Jun 2005 22:16:17 -0700 Subject: [X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- include/net/x25.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/net/x25.h') diff --git a/include/net/x25.h b/include/net/x25.h index 9dd70dd4a9b..8b39b98876e 100644 --- a/include/net/x25.h +++ b/include/net/x25.h @@ -79,6 +79,8 @@ enum { #define X25_DEFAULT_PACKET_SIZE X25_PS128 /* Default Packet Size */ #define X25_DEFAULT_THROUGHPUT 0x0A /* Deafult Throughput */ #define X25_DEFAULT_REVERSE 0x00 /* Default Reverse Charging */ +#define X25_DENY_ACCPT_APPRV 0x01 /* Default value */ +#define X25_ALLOW_ACCPT_APPRV 0x00 /* Control enabled */ #define X25_SMODULUS 8 #define X25_EMODULUS 128 @@ -94,7 +96,7 @@ enum { #define X25_FAC_CLASS_C 0x80 #define X25_FAC_CLASS_D 0xC0 -#define X25_FAC_REVERSE 0x01 +#define X25_FAC_REVERSE 0x01 /* also fast select */ #define X25_FAC_THROUGHPUT 0x02 #define X25_FAC_PACKET_SIZE 0x42 #define X25_FAC_WINDOW_SIZE 0x43 @@ -135,7 +137,7 @@ struct x25_sock { struct x25_address source_addr, dest_addr; struct x25_neigh *neighbour; unsigned int lci, cudmatchlength; - unsigned char state, condition, qbitincl, intflag; + unsigned char state, condition, qbitincl, intflag, accptapprv; unsigned short vs, vr, va, vl; unsigned long t2, t21, t22, t23; unsigned short fraglen; -- cgit