From 08cbc706acd2dd601b0663e28fa97ffb0564e105 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 13 Dec 2007 15:52:58 -0800 Subject: USB: at91_udc: correct hanging while disconnecting usb cable Correct hanging while disconnecting the USB device cable. Prevent a race between vbus and UDP interrupts. This bug was tracked on at91sam9260ek boards. A usb resume interrupt was firing after the vbus interrupt : the IP was then already stoped and not able to deal with it (no more clock). A simple interrupt disabling is ok as the "end of bus reset" irq is non maskable and ok to resume the USB device IP. Signed-off-by: Nicolas Ferre Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/at91_udc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index a6adf7e0f6f..cd62b029d17 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -887,6 +887,7 @@ static void pullup(struct at91_udc *udc, int is_on) if (is_on) { clk_on(udc); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_TXVC, 0); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 1); @@ -904,6 +905,7 @@ static void pullup(struct at91_udc *udc, int is_on) } } else { stop_activity(udc); + at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 0); -- cgit