From 28fd2d397bab5c7fb0eed0c20b6766c99ae34a8f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:33 +0000 Subject: [ARM] S3C64XX: Set GPIO pin when select IRQ_EINT type Set the GPIO pin mode to external interrupt when configuring an IRQ_EINT's IRQ type. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq-eint.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 1f7cc0067f5..5d62f2799ea 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -14,12 +14,15 @@ #include #include +#include #include #include #include #include +#include +#include #include #include @@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq) static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) { int offs = eint_offset(irq); + int pin; int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) ctrl |= newvalue << shift; __raw_writel(ctrl, reg); + /* set the GPIO pin appropriately */ + + if (offs < 23) + pin = S3C64XX_GPN(offs); + else + pin = S3C64XX_GPM(offs - 23); + + s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2)); + return 0; } -- cgit From 789b4ad36c7037758309df98f1efa65d0c26527d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 26 Jan 2009 19:12:01 +0000 Subject: [ARM] S3C64XX: Fix section mismatch for s3c64xx_register_clocks() Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c index 136c982c68e..ad1b9682c9c 100644 --- a/arch/arm/plat-s3c64xx/clock.c +++ b/arch/arm/plat-s3c64xx/clock.c @@ -248,7 +248,7 @@ static struct clk *clks[] __initdata = { &clk_48m, }; -void s3c64xx_register_clocks(void) +void __init s3c64xx_register_clocks(void) { struct clk *clkp; int ret; -- cgit From 778974797793e7dcd42e3701e09c686b6419cb35 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:41 +0000 Subject: [ARM] SMDK6410: Correct I2C device name for WM8580 The WM8580 driver registers itself as "wm8580" rather than "WM8580". Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 3c4d47145c8..0436783c87d 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -146,7 +146,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { static struct i2c_board_info i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, - { I2C_BOARD_INFO("WM8580", 0X1b), }, + { I2C_BOARD_INFO("wm8580", 0x1b), }, }; static struct i2c_board_info i2c_devs1[] __initdata = { -- cgit From 027191a8c6602d3fb6dde3820517339e1daf191d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:43 +0000 Subject: [ARM] SMDK6410: Declare iodesc table static Shuts up a warning. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 0436783c87d..25f7935576f 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -129,7 +129,7 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }; -struct map_desc smdk6410_iodesc[] = {}; +static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { #ifdef CONFIG_SMDK6410_SD_CH0 -- cgit From 8bd8dbdf3725ce569467bd704840249869f626d6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:44 +0000 Subject: [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint() It's an initcall and does not need to be exported. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq-eint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 5d62f2799ea..8d1b7290aa1 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -194,7 +194,7 @@ static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc) s3c_irq_demux_eint(20, 27); } -int __init s3c64xx_init_irq_eint(void) +static int __init s3c64xx_init_irq_eint(void) { int irq; -- cgit From 24d4076734b4ecf083a6be611040fe0743e59989 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 17:06:23 +0000 Subject: [ARM] S3C64XX: Do gpiolib configuration earlier arch_initcall() runs after the machine init function which means that any configuration of GPIO pins must currently be done later on, for example in callbacks from drivers. Move the initialisation earlier in order to allow machines to configure GPIOs directly in their init functions rather than having to have a callback invoked later on. Some other ARM platforms use this method. Other solutions for this include providing a special interface for setting up GPIOs en masse, adding callbacks to do the GPIO configuration from devices and doing the GPIO configuration implicitly. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index cc62941d7b5..ee9188add8f 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -417,4 +417,4 @@ static __init int s3c64xx_gpiolib_init(void) return 0; } -arch_initcall(s3c64xx_gpiolib_init); +core_initcall(s3c64xx_gpiolib_init); -- cgit From 4271c3bd46a0f0448118cf618c7210237a98e6bf Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:27 +0000 Subject: [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH The USB OHCI host device expects the IRQ definition to be named IRQ_USBH, so rename the S3C64XX IRQ header to match. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/include/plat/irqs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index 2846f550b72..f865bf4d709 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -117,7 +117,7 @@ #define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) #define IRQ_NFC S3C64XX_IRQ_VIC1(13) #define IRQ_CFCON S3C64XX_IRQ_VIC1(14) -#define IRQ_UHOST S3C64XX_IRQ_VIC1(15) +#define IRQ_USBH S3C64XX_IRQ_VIC1(15) #define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) #define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) #define IRQ_IIC S3C64XX_IRQ_VIC1(18) -- cgit From 19c5957081a6ffbf014e6c944e6aafee3c1632c3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:33 +0000 Subject: [ARM] S3C64XX: Fix name of USB host clock. The usb-host-bus clock should be named usb-bus-host. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 8d9a0cada66..a2f526bcb38 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -351,7 +351,7 @@ static struct clksrc_clk clk_mmc2 = { static struct clksrc_clk clk_usbhost = { .clk = { - .name = "usb-host-bus", + .name = "usb-bus-host", .id = -1, .ctrlbit = S3C_CLKCON_SCLK_UHOST, .enable = s3c64xx_sclk_ctrl, -- cgit From 41ba41d7c7e1d2a3c9cdfe16c1ee9f7af4693ae2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:34 +0000 Subject: [ARM] S3C64XX: Fix USB host clock mux list The clock list for the USB host bus clock was in the wrong order, move clk_48m to position 0. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index a2f526bcb38..2984270b40a 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -189,10 +189,10 @@ static struct clk_sources clkset_uart = { }; static struct clk *clkset_uhost_list[] = { + &clk_48m, &clk_mout_epll.clk, &clk_dout_mpll, &clk_fin_epll, - &clk_48m, }; static struct clk_sources clkset_uhost = { -- cgit From 3782d3605522b836f53c6d11f76abf5404425c1b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 27 Feb 2009 11:25:37 +0000 Subject: [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c Fix the following sparse warnings in s3c6400-clock.c: 39:12: warning: symbol 'clk_ext_xtal_mux' was not declared. Should it be static? 66:12: warning: symbol 'clk_fout_apll' was not declared. Should it be static? 81:19: warning: symbol 'clk_mout_apll' was not declared. Should it be static? 91:12: warning: symbol 'clk_fout_epll' was not declared. Should it be static? 106:19: warning: symbol 'clk_mout_epll' was not declared. Should it be static? 126:19: warning: symbol 'clk_mout_mpll' was not declared. Should it be static? 148:12: warning: symbol 'clk_dout_mpll' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 2984270b40a..6edbeef6aa9 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -36,7 +36,7 @@ * ext_xtal_mux for want of an actual name from the manual. */ -struct clk clk_ext_xtal_mux = { +static struct clk clk_ext_xtal_mux = { .name = "ext_xtal", .id = -1, }; @@ -63,7 +63,7 @@ struct clksrc_clk { void __iomem *reg_divider; }; -struct clk clk_fout_apll = { +static struct clk clk_fout_apll = { .name = "fout_apll", .id = -1, }; @@ -78,7 +78,7 @@ static struct clk_sources clk_src_apll = { .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; -struct clksrc_clk clk_mout_apll = { +static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", .id = -1, @@ -88,7 +88,7 @@ struct clksrc_clk clk_mout_apll = { .sources = &clk_src_apll, }; -struct clk clk_fout_epll = { +static struct clk clk_fout_epll = { .name = "fout_epll", .id = -1, }; @@ -103,7 +103,7 @@ static struct clk_sources clk_src_epll = { .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; -struct clksrc_clk clk_mout_epll = { +static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", .id = -1, @@ -123,7 +123,7 @@ static struct clk_sources clk_src_mpll = { .nr_sources = ARRAY_SIZE(clk_src_mpll_list), }; -struct clksrc_clk clk_mout_mpll = { +static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", .id = -1, @@ -145,7 +145,7 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) return rate; } -struct clk clk_dout_mpll = { +static struct clk clk_dout_mpll = { .name = "dout_mpll", .id = -1, .parent = &clk_mout_mpll.clk, -- cgit From fdca9bf2dae14218704ddd7dc60ad1b198c1d787 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 27 Feb 2009 11:29:23 +0000 Subject: [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c Fix the following sparse warnings in arch/arm/plat-s3c64xx/irq.c arch/arm/plat-s3c64xx/irq.c:210:23: warning: incorrect type in initializer (different address spaces) arch/arm/plat-s3c64xx/irq.c:210:23: expected void *reg_base arch/arm/plat-s3c64xx/irq.c:210:23: got void [noderef] *regs arch/arm/plat-s3c64xx/irq.c:215:2: warning: incorrect type in argument 1 (different address spaces) arch/arm/plat-s3c64xx/irq.c:215:2: expected void const volatile [noderef] * arch/arm/plat-s3c64xx/irq.c:215:2: got void * Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c index a94f1d5e819..f22edf7c2d2 100644 --- a/arch/arm/plat-s3c64xx/irq.c +++ b/arch/arm/plat-s3c64xx/irq.c @@ -207,7 +207,7 @@ static struct irq_chip s3c_irq_uart = { static void __init s3c64xx_uart_irq(struct uart_irq *uirq) { - void *reg_base = uirq->regs; + void __iomem *reg_base = uirq->regs; unsigned int irq; int offs; -- cgit From efeff568677aa325f84d3ce37c219019887a79eb Mon Sep 17 00:00:00 2001 From: Werner Almesberger Date: Fri, 27 Feb 2009 08:03:07 -0300 Subject: [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc Some of the rate selection logic in s3c64xx_setrate_clksrc uses what appears to be parent clock selection logic. This patch corrects it. I also added a check for overly large dividers to prevent them from changing unrelated clocks. Signed-off-by: Werner Almesberger Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 6edbeef6aa9..05b17528041 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -239,10 +239,12 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) rate = clk_round_rate(clk, rate); div = clk_get_rate(clk->parent) / rate; + if (div > 16) + return -EINVAL; val = __raw_readl(reg); - val &= ~sclk->mask; - val |= (rate - 1) << sclk->shift; + val &= ~(0xf << sclk->shift); + val |= (div - 1) << sclk->shift; __raw_writel(val, reg); return 0; -- cgit From f45964ed6971db2e7ae6cb9b164def1d23b46612 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Mon, 2 Mar 2009 17:30:36 +0200 Subject: [ARM] orion5x: pass dram mbus data to xor driver This data should be passed to the xor driver in order to initialize the address decoding windows of the xor unit. without this patch, the self tests of the xor will fail unless the address decoding windows were initialized by the boot loader. Signed-off-by: Saeed Bishara Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/common.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0a623379789..8a0e49d8425 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -431,6 +431,10 @@ void __init orion5x_uart1_init(void) /***************************************************************************** * XOR engine ****************************************************************************/ +struct mv_xor_platform_shared_data orion5x_xor_shared_data = { + .dram = &orion5x_mbus_dram_info, +}; + static struct resource orion5x_xor_shared_resources[] = { { .name = "xor low", @@ -448,6 +452,9 @@ static struct resource orion5x_xor_shared_resources[] = { static struct platform_device orion5x_xor_shared = { .name = MV_XOR_SHARED_NAME, .id = 0, + .dev = { + .platform_data = &orion5x_xor_shared_data, + }, .num_resources = ARRAY_SIZE(orion5x_xor_shared_resources), .resource = orion5x_xor_shared_resources, }; -- cgit From 87d99d6f7ee3ec73b2b0212427b173502ec9d6cb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 4 Mar 2009 10:07:40 -0800 Subject: ARM: OMAP: Fix compile error if pm.h is included Change the error to a warning. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/pm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index 2a9c27ad4c3..37e2f0f38b4 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -108,7 +108,7 @@ !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) && \ !defined(CONFIG_ARCH_OMAP24XX) -#error "Power management for this processor not implemented yet" +#warning "Power management for this processor not implemented yet" #endif #ifndef __ASSEMBLER__ -- cgit From 80ea3bac3a47bc73efa334d0dd57099d0ff14216 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 4 Mar 2009 10:07:41 -0800 Subject: ARM: OMAP: sched_clock() corrected After my OMAP3 board has been running for a while, I'm seeing weird latency traces like this: sh-1574 0d.h2 153us : do_timer (tick_do_update_jiffies64) sh-1574 0d.h2 153us : update_wall_time (do_timer) sh-1574 0d.h2 153us!: omap_32k_read (update_wall_time) sh-1574 0d.h2 1883us : update_xtime_cache (update_wall_time) sh-1574 0d.h2 1883us : clocksource_get_next (update_wall_time) sh-1574 0d.h2 1883us+: _spin_lock_irqsave (clocksource_get_next) and after a while: sh-17818 0d.h3 153us : do_timer (tick_do_update_jiffies64) sh-17818 0d.h3 153us : update_wall_time (do_timer) sh-17818 0d.h3 153us!: omap_32k_read (update_wall_time) sh-17818 0d.h3 1915us : update_xtime_cache (update_wall_time) sh-17818 0d.h3 1915us+: clocksource_get_next (update_wall_time) sh-17818 0d.h3 1945us : _spin_lock_irqsave (clocksource_get_next) Turns out that sched_clock() is using cyc2ns(), which returns NTP adjusted time. The sched_clock() frequency should not be adjusted. The patch deletes omap_32k_ticks_to_nsecs() and rewrites sched_clock() to do the conversion using the constant multiplier. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 0843b8882f9..6825fbb5a05 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -199,21 +199,17 @@ static struct clocksource clocksource_32k = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -/* - * Rounds down to nearest nsec. - */ -unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k) -{ - return cyc2ns(&clocksource_32k, ticks_32k); -} - /* * Returns current time from boot in nsecs. It's OK for this to wrap * around for now, as it's just a relative time stamp. */ unsigned long long sched_clock(void) { - return omap_32k_ticks_to_nsecs(omap_32k_read()); + unsigned long long ret; + + ret = (unsigned long long)omap_32k_read(); + ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; + return ret; } static int __init omap_init_clocksource_32k(void) -- cgit From e951651657610305c9af0045fd64c6a5b0bc4b80 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 4 Mar 2009 10:07:41 -0800 Subject: ARM: OMAP: Allow I2C bus driver to be compiled as a module Fixes a linker error when OMAP I2C bus driver is compiled as a module: ERROR: "i2c_register_board_info" [arch/arm/plat-omap/i2c.ko] undefined! The I2C utility functions used for board initialization should be always built-in. Signed-off-by: Aaro Koskinen Acked-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Makefile | 3 ++- arch/arm/plat-omap/include/mach/common.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index deaff58878a..04a100cfb8e 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -18,7 +18,8 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o -obj-$(CONFIG_I2C_OMAP) += i2c.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index ef70e2b0f05..e746ec7e785 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -35,7 +35,7 @@ extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern void omap_serial_init(void); extern void omap_serial_enable_clocks(int enable); -#ifdef CONFIG_I2C_OMAP +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len); -- cgit From 8ca7fe267f58462825729443f3e3b44ef4901cf0 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Wed, 4 Mar 2009 10:07:42 -0800 Subject: ARM: OMAP: board-omap3beagle: set i2c-3 to 100kHz Changing it do 100kHz is needed to make more devices works properly. Controlling the TI DLP Pico projector[1] doesn't work properly at 400kHz, 100kHz and lower work fine. EDID readout is unaffected by this change. [1] http://focus.ti.com/dlpdmd/docs/dlpdiscovery.tsp?sectionId=60&tabId=2234 Signed-off-by: Koen Kooi Acked-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 38c88fbe658..e39cd2c46cf 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -178,7 +178,9 @@ static int __init omap3_beagle_i2c_init(void) #ifdef CONFIG_I2C2_OMAP_BEAGLE omap_register_i2c_bus(2, 400, NULL, 0); #endif - omap_register_i2c_bus(3, 400, NULL, 0); + /* Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz */ + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } -- cgit From d4cc510c61b050ef38e842a12feef71c56d7cf81 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 4 Mar 2009 11:48:46 +0100 Subject: [ARM] 5418/1: restore lr before leaving mcount MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc seems to expect that lr isn't clobbered by mcount, because for a function starting with: static int func(void) { void *ra = __builtin_return_address(0); printk(KERN_EMERG "__builtin_return_address(0) = %pS\n", ra) ... the following assembler is generated by gcc 4.3.2: 0: e1a0c00d mov ip, sp 4: e92dd810 push {r4, fp, ip, lr, pc} 8: e24cb004 sub fp, ip, #4 ; 0x4 c: ebfffffe bl 0 10: e59f0034 ldr r0, [pc, #52] 14: e1a0100e mov r1, lr 18: ebfffffe bl 0 Without this patch obviously __builtin_return_address(0) yields func+0x10 instead of the return address of the caller. Note this patch fixes a similar issue for the routines used with dynamic ftrace even though this isn't currently selectable for ARM. Cc: Abhishek Sagar Cc: Steven Rostedt Cc: Ingo Molnar Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 49a6ba926c2..159d0416f27 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -111,6 +111,7 @@ ENTRY(mcount) .globl mcount_call mcount_call: bl ftrace_stub + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} ENTRY(ftrace_caller) @@ -122,6 +123,7 @@ ENTRY(ftrace_caller) .globl ftrace_call ftrace_call: bl ftrace_stub + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} #else @@ -133,6 +135,7 @@ ENTRY(mcount) adr r0, ftrace_stub cmp r0, r2 bne trace + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} trace: @@ -141,6 +144,7 @@ trace: sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc mov pc, r2 + mov lr, r1 @ restore lr ldmia sp!, {r0-r3, pc} #endif /* CONFIG_DYNAMIC_FTRACE */ -- cgit From ef449e6d21b6e560c7ec36ed285ec3a34e0b12ed Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Thu, 5 Mar 2009 17:33:50 +0100 Subject: [ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info Fix build warnings due to struct i2c_board_info in Patch "5311/1: add core support for built in i2c bus" is causing 11 of 39 the build warnings with Kautobuild for ep93xx_defconfig on kernel 2.6.29-rc5-git4. This patch fixes it. Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/include/mach/platform.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 88f7e88f152..05f0f4f2f3c 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -4,6 +4,8 @@ #ifndef __ASSEMBLY__ +struct i2c_board_info; + struct ep93xx_eth_data { unsigned char dev_addr[6]; -- cgit From 20214fcd74bddc16d65d466212f5dd32aafe8868 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Mon, 12 Jan 2009 16:22:57 +0200 Subject: MX1 fix include Includes missed irqs.h in devices.c and mx1ads.c. Signed-off-by: Darius Augulis Signed-off-by: Sascha Hauer --- arch/arm/mach-mx1/devices.c | 2 ++ arch/arm/mach-mx1/mx1ads.c | 1 + 2 files changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c index 686d8d2dbb2..a95644193f3 100644 --- a/arch/arm/mach-mx1/devices.c +++ b/arch/arm/mach-mx1/devices.c @@ -23,6 +23,8 @@ #include #include #include + +#include #include static struct resource imx_csi_resources[] = { diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 2e4b185fe4a..3200cf60e38 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include -- cgit From 8c5dfd25519bf302ba43daa59976c4d675a594a7 Mon Sep 17 00:00:00 2001 From: Stoyan Gaydarov Date: Tue, 10 Mar 2009 00:10:32 -0500 Subject: x86: BUG to BUG_ON changes Impact: cleanup Signed-off-by: Stoyan Gaydarov LKML-Reference: <1236661850-8237-8-git-send-email-stoyboyker@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/common.c | 6 ++---- arch/x86/kernel/quirks.c | 3 +-- 2 files changed, 3 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 826d5c87627..f8869978bbb 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1078,8 +1078,7 @@ void __cpuinit cpu_init(void) atomic_inc(&init_mm.mm_count); me->active_mm = &init_mm; - if (me->mm) - BUG(); + BUG_ON(me->mm); enter_lazy_tlb(&init_mm, me); load_sp0(t, ¤t->thread); @@ -1145,8 +1144,7 @@ void __cpuinit cpu_init(void) */ atomic_inc(&init_mm.mm_count); curr->active_mm = &init_mm; - if (curr->mm) - BUG(); + BUG_ON(curr->mm); enter_lazy_tlb(&init_mm, curr); load_sp0(t, thread); diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 309949e9e1c..6a5a2970f4c 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -74,8 +74,7 @@ static void ich_force_hpet_resume(void) if (!force_hpet_address) return; - if (rcba_base == NULL) - BUG(); + BUG_ON(rcba_base == NULL); /* read the Function Disable register, dword mode only */ val = readl(rcba_base + 0x3404); -- cgit From 9b779edf4b97798d037bb44fca2719ac184d0f14 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Tue, 10 Mar 2009 15:37:51 +0530 Subject: x86: cpu architecture debug code Introduce: cat /sys/kernel/debug/x86/cpu/* for Intel and AMD processors to view / debug the state of each CPU. By using this we can debug whole range of registers and other cpu information for debugging purpose and monitor how things are changing. This can be useful for developers as well as for users. Signed-off-by: Jaswinder Singh Rajput LKML-Reference: <1236701373.3387.4.camel@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 6 + arch/x86/include/asm/cpu_debug.h | 193 ++++++++++ arch/x86/kernel/cpu/Makefile | 2 + arch/x86/kernel/cpu/cpu_debug.c | 784 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 985 insertions(+) create mode 100755 arch/x86/include/asm/cpu_debug.h create mode 100755 arch/x86/kernel/cpu/cpu_debug.c (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 31758378bcd..03f0a3aa43b 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -931,6 +931,12 @@ config X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. +config X86_CPU_DEBUG + tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support" + ---help--- + If you select this option, this will provide various x86 CPUs + information through debugfs. + choice prompt "High Memory Support" default HIGHMEM4G if !X86_NUMAQ diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h new file mode 100755 index 00000000000..d24d64fcee0 --- /dev/null +++ b/arch/x86/include/asm/cpu_debug.h @@ -0,0 +1,193 @@ +#ifndef _ASM_X86_CPU_DEBUG_H +#define _ASM_X86_CPU_DEBUG_H + +/* + * CPU x86 architecture debug + * + * Copyright(C) 2009 Jaswinder Singh Rajput + */ + +/* Register flags */ +enum cpu_debug_bit { +/* Model Specific Registers (MSRs) */ + CPU_MC_BIT, /* Machine Check */ + CPU_MONITOR_BIT, /* Monitor */ + CPU_TIME_BIT, /* Time */ + CPU_PMC_BIT, /* Performance Monitor */ + CPU_PLATFORM_BIT, /* Platform */ + CPU_APIC_BIT, /* APIC */ + CPU_POWERON_BIT, /* Power-on */ + CPU_CONTROL_BIT, /* Control */ + CPU_FEATURES_BIT, /* Features control */ + CPU_LBRANCH_BIT, /* Last Branch */ + CPU_BIOS_BIT, /* BIOS */ + CPU_FREQ_BIT, /* Frequency */ + CPU_MTTR_BIT, /* MTRR */ + CPU_PERF_BIT, /* Performance */ + CPU_CACHE_BIT, /* Cache */ + CPU_SYSENTER_BIT, /* Sysenter */ + CPU_THERM_BIT, /* Thermal */ + CPU_MISC_BIT, /* Miscellaneous */ + CPU_DEBUG_BIT, /* Debug */ + CPU_PAT_BIT, /* PAT */ + CPU_VMX_BIT, /* VMX */ + CPU_CALL_BIT, /* System Call */ + CPU_BASE_BIT, /* BASE Address */ + CPU_SMM_BIT, /* System mgmt mode */ + CPU_SVM_BIT, /*Secure Virtual Machine*/ + CPU_OSVM_BIT, /* OS-Visible Workaround*/ +/* Standard Registers */ + CPU_TSS_BIT, /* Task Stack Segment */ + CPU_CR_BIT, /* Control Registers */ + CPU_DT_BIT, /* Descriptor Table */ +/* End of Registers flags */ + CPU_REG_ALL_BIT, /* Select all Registers */ +}; + +#define CPU_REG_ALL (~0) /* Select all Registers */ + +#define CPU_MC (1 << CPU_MC_BIT) +#define CPU_MONITOR (1 << CPU_MONITOR_BIT) +#define CPU_TIME (1 << CPU_TIME_BIT) +#define CPU_PMC (1 << CPU_PMC_BIT) +#define CPU_PLATFORM (1 << CPU_PLATFORM_BIT) +#define CPU_APIC (1 << CPU_APIC_BIT) +#define CPU_POWERON (1 << CPU_POWERON_BIT) +#define CPU_CONTROL (1 << CPU_CONTROL_BIT) +#define CPU_FEATURES (1 << CPU_FEATURES_BIT) +#define CPU_LBRANCH (1 << CPU_LBRANCH_BIT) +#define CPU_BIOS (1 << CPU_BIOS_BIT) +#define CPU_FREQ (1 << CPU_FREQ_BIT) +#define CPU_MTRR (1 << CPU_MTTR_BIT) +#define CPU_PERF (1 << CPU_PERF_BIT) +#define CPU_CACHE (1 << CPU_CACHE_BIT) +#define CPU_SYSENTER (1 << CPU_SYSENTER_BIT) +#define CPU_THERM (1 << CPU_THERM_BIT) +#define CPU_MISC (1 << CPU_MISC_BIT) +#define CPU_DEBUG (1 << CPU_DEBUG_BIT) +#define CPU_PAT (1 << CPU_PAT_BIT) +#define CPU_VMX (1 << CPU_VMX_BIT) +#define CPU_CALL (1 << CPU_CALL_BIT) +#define CPU_BASE (1 << CPU_BASE_BIT) +#define CPU_SMM (1 << CPU_SMM_BIT) +#define CPU_SVM (1 << CPU_SVM_BIT) +#define CPU_OSVM (1 << CPU_OSVM_BIT) +#define CPU_TSS (1 << CPU_TSS_BIT) +#define CPU_CR (1 << CPU_CR_BIT) +#define CPU_DT (1 << CPU_DT_BIT) + +/* Register file flags */ +enum cpu_file_bit { + CPU_INDEX_BIT, /* index */ + CPU_VALUE_BIT, /* value */ +}; + +#define CPU_FILE_VALUE (1 << CPU_VALUE_BIT) + +/* + * DisplayFamily_DisplayModel Processor Families/Processor Number Series + * -------------------------- ------------------------------------------ + * 05_01, 05_02, 05_04 Pentium, Pentium with MMX + * + * 06_01 Pentium Pro + * 06_03, 06_05 Pentium II Xeon, Pentium II + * 06_07, 06_08, 06_0A, 06_0B Pentium III Xeon, Pentum III + * + * 06_09, 060D Pentium M + * + * 06_0E Core Duo, Core Solo + * + * 06_0F Xeon 3000, 3200, 5100, 5300, 7300 series, + * Core 2 Quad, Core 2 Extreme, Core 2 Duo, + * Pentium dual-core + * 06_17 Xeon 5200, 5400 series, Core 2 Quad Q9650 + * + * 06_1C Atom + * + * 0F_00, 0F_01, 0F_02 Xeon, Xeon MP, Pentium 4 + * 0F_03, 0F_04 Xeon, Xeon MP, Pentium 4, Pentium D + * + * 0F_06 Xeon 7100, 5000 Series, Xeon MP, + * Pentium 4, Pentium D + */ + +/* Register processors bits */ +enum cpu_processor_bit { + CPU_NONE, +/* Intel */ + CPU_INTEL_PENTIUM_BIT, + CPU_INTEL_P6_BIT, + CPU_INTEL_PENTIUM_M_BIT, + CPU_INTEL_CORE_BIT, + CPU_INTEL_CORE2_BIT, + CPU_INTEL_ATOM_BIT, + CPU_INTEL_XEON_P4_BIT, + CPU_INTEL_XEON_MP_BIT, +}; + +#define CPU_ALL (~0) /* Select all CPUs */ + +#define CPU_INTEL_PENTIUM (1 << CPU_INTEL_PENTIUM_BIT) +#define CPU_INTEL_P6 (1 << CPU_INTEL_P6_BIT) +#define CPU_INTEL_PENTIUM_M (1 << CPU_INTEL_PENTIUM_M_BIT) +#define CPU_INTEL_CORE (1 << CPU_INTEL_CORE_BIT) +#define CPU_INTEL_CORE2 (1 << CPU_INTEL_CORE2_BIT) +#define CPU_INTEL_ATOM (1 << CPU_INTEL_ATOM_BIT) +#define CPU_INTEL_XEON_P4 (1 << CPU_INTEL_XEON_P4_BIT) +#define CPU_INTEL_XEON_MP (1 << CPU_INTEL_XEON_MP_BIT) + +#define CPU_INTEL_PX (CPU_INTEL_P6 | CPU_INTEL_PENTIUM_M) +#define CPU_INTEL_COREX (CPU_INTEL_CORE | CPU_INTEL_CORE2) +#define CPU_INTEL_XEON (CPU_INTEL_XEON_P4 | CPU_INTEL_XEON_MP) +#define CPU_CO_AT (CPU_INTEL_CORE | CPU_INTEL_ATOM) +#define CPU_C2_AT (CPU_INTEL_CORE2 | CPU_INTEL_ATOM) +#define CPU_CX_AT (CPU_INTEL_COREX | CPU_INTEL_ATOM) +#define CPU_CX_XE (CPU_INTEL_COREX | CPU_INTEL_XEON) +#define CPU_P6_XE (CPU_INTEL_P6 | CPU_INTEL_XEON) +#define CPU_PM_CO_AT (CPU_INTEL_PENTIUM_M | CPU_CO_AT) +#define CPU_C2_AT_XE (CPU_C2_AT | CPU_INTEL_XEON) +#define CPU_CX_AT_XE (CPU_CX_AT | CPU_INTEL_XEON) +#define CPU_P6_CX_AT (CPU_INTEL_P6 | CPU_CX_AT) +#define CPU_P6_CX_XE (CPU_P6_XE | CPU_INTEL_COREX) +#define CPU_P6_CX_AT_XE (CPU_INTEL_P6 | CPU_CX_AT_XE) +#define CPU_PM_CX_AT_XE (CPU_INTEL_PENTIUM_M | CPU_CX_AT_XE) +#define CPU_PM_CX_AT (CPU_INTEL_PENTIUM_M | CPU_CX_AT) +#define CPU_PM_CX_XE (CPU_INTEL_PENTIUM_M | CPU_CX_XE) +#define CPU_PX_CX_AT (CPU_INTEL_PX | CPU_CX_AT) +#define CPU_PX_CX_AT_XE (CPU_INTEL_PX | CPU_CX_AT_XE) + +/* Select all Intel CPUs*/ +#define CPU_INTEL_ALL (CPU_INTEL_PENTIUM | CPU_PX_CX_AT_XE) + +#define MAX_CPU_FILES 512 + +struct cpu_private { + unsigned cpu; + unsigned type; + unsigned reg; + unsigned file; +}; + +struct cpu_debug_base { + char *name; /* Register name */ + unsigned flag; /* Register flag */ +}; + +struct cpu_cpuX_base { + struct dentry *dentry; /* Register dentry */ + int init; /* Register index file */ +}; + +struct cpu_file_base { + char *name; /* Register file name */ + unsigned flag; /* Register file flag */ +}; + +struct cpu_debug_range { + unsigned min; /* Register range min */ + unsigned max; /* Register range max */ + unsigned flag; /* Supported flags */ + unsigned model; /* Supported models */ +}; + +#endif /* _ASM_X86_CPU_DEBUG_H */ diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 82db7f45e2d..d4356f8b752 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -14,6 +14,8 @@ obj-y += vmware.o hypervisor.o obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o obj-$(CONFIG_X86_64) += bugs_64.o +obj-$(CONFIG_X86_CPU_DEBUG) += cpu_debug.o + obj-$(CONFIG_CPU_SUP_INTEL) += intel.o obj-$(CONFIG_CPU_SUP_AMD) += amd.o obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c new file mode 100755 index 00000000000..0bdf4daba20 --- /dev/null +++ b/arch/x86/kernel/cpu/cpu_debug.c @@ -0,0 +1,784 @@ +/* + * CPU x86 architecture debug code + * + * Copyright(C) 2009 Jaswinder Singh Rajput + * + * For licencing details see kernel-base/COPYING + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static DEFINE_PER_CPU(struct cpu_cpuX_base, cpu_arr[CPU_REG_ALL_BIT]); +static DEFINE_PER_CPU(struct cpu_private *, priv_arr[MAX_CPU_FILES]); +static DEFINE_PER_CPU(unsigned, cpu_modelflag); +static DEFINE_PER_CPU(int, cpu_priv_count); +static DEFINE_PER_CPU(unsigned, cpu_model); + +static DEFINE_MUTEX(cpu_debug_lock); + +static struct dentry *cpu_debugfs_dir; + +static struct cpu_debug_base cpu_base[] = { + { "mc", CPU_MC }, /* Machine Check */ + { "monitor", CPU_MONITOR }, /* Monitor */ + { "time", CPU_TIME }, /* Time */ + { "pmc", CPU_PMC }, /* Performance Monitor */ + { "platform", CPU_PLATFORM }, /* Platform */ + { "apic", CPU_APIC }, /* APIC */ + { "poweron", CPU_POWERON }, /* Power-on */ + { "control", CPU_CONTROL }, /* Control */ + { "features", CPU_FEATURES }, /* Features control */ + { "lastbranch", CPU_LBRANCH }, /* Last Branch */ + { "bios", CPU_BIOS }, /* BIOS */ + { "freq", CPU_FREQ }, /* Frequency */ + { "mtrr", CPU_MTRR }, /* MTRR */ + { "perf", CPU_PERF }, /* Performance */ + { "cache", CPU_CACHE }, /* Cache */ + { "sysenter", CPU_SYSENTER }, /* Sysenter */ + { "therm", CPU_THERM }, /* Thermal */ + { "misc", CPU_MISC }, /* Miscellaneous */ + { "debug", CPU_DEBUG }, /* Debug */ + { "pat", CPU_PAT }, /* PAT */ + { "vmx", CPU_VMX }, /* VMX */ + { "call", CPU_CALL }, /* System Call */ + { "base", CPU_BASE }, /* BASE Address */ + { "smm", CPU_SMM }, /* System mgmt mode */ + { "svm", CPU_SVM }, /*Secure Virtial Machine*/ + { "osvm", CPU_OSVM }, /* OS-Visible Workaround*/ + { "tss", CPU_TSS }, /* Task Stack Segment */ + { "cr", CPU_CR }, /* Control Registers */ + { "dt", CPU_DT }, /* Descriptor Table */ + { "registers", CPU_REG_ALL }, /* Select all Registers */ +}; + +static struct cpu_file_base cpu_file[] = { + { "index", CPU_REG_ALL }, /* index */ + { "value", CPU_REG_ALL }, /* value */ +}; + +/* Intel Registers Range */ +static struct cpu_debug_range cpu_intel_range[] = { + { 0x00000000, 0x00000001, CPU_MC, CPU_INTEL_ALL }, + { 0x00000006, 0x00000007, CPU_MONITOR, CPU_CX_AT_XE }, + { 0x00000010, 0x00000010, CPU_TIME, CPU_INTEL_ALL }, + { 0x00000011, 0x00000013, CPU_PMC, CPU_INTEL_PENTIUM }, + { 0x00000017, 0x00000017, CPU_PLATFORM, CPU_PX_CX_AT_XE }, + { 0x0000001B, 0x0000001B, CPU_APIC, CPU_P6_CX_AT_XE }, + + { 0x0000002A, 0x0000002A, CPU_POWERON, CPU_PX_CX_AT_XE }, + { 0x0000002B, 0x0000002B, CPU_POWERON, CPU_INTEL_XEON }, + { 0x0000002C, 0x0000002C, CPU_FREQ, CPU_INTEL_XEON }, + { 0x0000003A, 0x0000003A, CPU_CONTROL, CPU_CX_AT_XE }, + + { 0x00000040, 0x00000043, CPU_LBRANCH, CPU_PM_CX_AT_XE }, + { 0x00000044, 0x00000047, CPU_LBRANCH, CPU_PM_CO_AT }, + { 0x00000060, 0x00000063, CPU_LBRANCH, CPU_C2_AT }, + { 0x00000064, 0x00000067, CPU_LBRANCH, CPU_INTEL_ATOM }, + + { 0x00000079, 0x00000079, CPU_BIOS, CPU_P6_CX_AT_XE }, + { 0x00000088, 0x0000008A, CPU_CACHE, CPU_INTEL_P6 }, + { 0x0000008B, 0x0000008B, CPU_BIOS, CPU_P6_CX_AT_XE }, + { 0x0000009B, 0x0000009B, CPU_MONITOR, CPU_INTEL_XEON }, + + { 0x000000C1, 0x000000C2, CPU_PMC, CPU_P6_CX_AT }, + { 0x000000CD, 0x000000CD, CPU_FREQ, CPU_CX_AT }, + { 0x000000E7, 0x000000E8, CPU_PERF, CPU_CX_AT }, + { 0x000000FE, 0x000000FE, CPU_MTRR, CPU_P6_CX_XE }, + + { 0x00000116, 0x00000116, CPU_CACHE, CPU_INTEL_P6 }, + { 0x00000118, 0x00000118, CPU_CACHE, CPU_INTEL_P6 }, + { 0x00000119, 0x00000119, CPU_CACHE, CPU_INTEL_PX }, + { 0x0000011A, 0x0000011B, CPU_CACHE, CPU_INTEL_P6 }, + { 0x0000011E, 0x0000011E, CPU_CACHE, CPU_PX_CX_AT }, + + { 0x00000174, 0x00000176, CPU_SYSENTER, CPU_P6_CX_AT_XE }, + { 0x00000179, 0x0000017A, CPU_MC, CPU_PX_CX_AT_XE }, + { 0x0000017B, 0x0000017B, CPU_MC, CPU_P6_XE }, + { 0x00000186, 0x00000187, CPU_PMC, CPU_P6_CX_AT }, + { 0x00000198, 0x00000199, CPU_PERF, CPU_PM_CX_AT_XE }, + { 0x0000019A, 0x0000019A, CPU_TIME, CPU_PM_CX_AT_XE }, + { 0x0000019B, 0x0000019D, CPU_THERM, CPU_PM_CX_AT_XE }, + { 0x000001A0, 0x000001A0, CPU_MISC, CPU_PM_CX_AT_XE }, + + { 0x000001C9, 0x000001C9, CPU_LBRANCH, CPU_PM_CX_AT }, + { 0x000001D7, 0x000001D8, CPU_LBRANCH, CPU_INTEL_XEON }, + { 0x000001D9, 0x000001D9, CPU_DEBUG, CPU_CX_AT_XE }, + { 0x000001DA, 0x000001DA, CPU_LBRANCH, CPU_INTEL_XEON }, + { 0x000001DB, 0x000001DB, CPU_LBRANCH, CPU_P6_XE }, + { 0x000001DC, 0x000001DC, CPU_LBRANCH, CPU_INTEL_P6 }, + { 0x000001DD, 0x000001DE, CPU_LBRANCH, CPU_PX_CX_AT_XE }, + { 0x000001E0, 0x000001E0, CPU_LBRANCH, CPU_INTEL_P6 }, + + { 0x00000200, 0x0000020F, CPU_MTRR, CPU_P6_CX_XE }, + { 0x00000250, 0x00000250, CPU_MTRR, CPU_P6_CX_XE }, + { 0x00000258, 0x00000259, CPU_MTRR, CPU_P6_CX_XE }, + { 0x00000268, 0x0000026F, CPU_MTRR, CPU_P6_CX_XE }, + { 0x00000277, 0x00000277, CPU_PAT, CPU_C2_AT_XE }, + { 0x000002FF, 0x000002FF, CPU_MTRR, CPU_P6_CX_XE }, + + { 0x00000300, 0x00000308, CPU_PMC, CPU_INTEL_XEON }, + { 0x00000309, 0x0000030B, CPU_PMC, CPU_C2_AT_XE }, + { 0x0000030C, 0x00000311, CPU_PMC, CPU_INTEL_XEON }, + { 0x00000345, 0x00000345, CPU_PMC, CPU_C2_AT }, + { 0x00000360, 0x00000371, CPU_PMC, CPU_INTEL_XEON }, + { 0x0000038D, 0x00000390, CPU_PMC, CPU_C2_AT }, + { 0x000003A0, 0x000003BE, CPU_PMC, CPU_INTEL_XEON }, + { 0x000003C0, 0x000003CD, CPU_PMC, CPU_INTEL_XEON }, + { 0x000003E0, 0x000003E1, CPU_PMC, CPU_INTEL_XEON }, + { 0x000003F0, 0x000003F0, CPU_PMC, CPU_INTEL_XEON }, + { 0x000003F1, 0x000003F1, CPU_PMC, CPU_C2_AT_XE }, + { 0x000003F2, 0x000003F2, CPU_PMC, CPU_INTEL_XEON }, + + { 0x00000400, 0x00000402, CPU_MC, CPU_PM_CX_AT_XE }, + { 0x00000403, 0x00000403, CPU_MC, CPU_INTEL_XEON }, + { 0x00000404, 0x00000406, CPU_MC, CPU_PM_CX_AT_XE }, + { 0x00000407, 0x00000407, CPU_MC, CPU_INTEL_XEON }, + { 0x00000408, 0x0000040A, CPU_MC, CPU_PM_CX_AT_XE }, + { 0x0000040B, 0x0000040B, CPU_MC, CPU_INTEL_XEON }, + { 0x0000040C, 0x0000040E, CPU_MC, CPU_PM_CX_XE }, + { 0x0000040F, 0x0000040F, CPU_MC, CPU_INTEL_XEON }, + { 0x00000410, 0x00000412, CPU_MC, CPU_PM_CX_AT_XE }, + { 0x00000413, 0x00000417, CPU_MC, CPU_CX_AT_XE }, + { 0x00000480, 0x0000048B, CPU_VMX, CPU_CX_AT_XE }, + + { 0x00000600, 0x00000600, CPU_DEBUG, CPU_PM_CX_AT_XE }, + { 0x00000680, 0x0000068F, CPU_LBRANCH, CPU_INTEL_XEON }, + { 0x000006C0, 0x000006CF, CPU_LBRANCH, CPU_INTEL_XEON }, + + { 0x000107CC, 0x000107D3, CPU_PMC, CPU_INTEL_XEON_MP }, + + { 0xC0000080, 0xC0000080, CPU_FEATURES, CPU_INTEL_XEON }, + { 0xC0000081, 0xC0000082, CPU_CALL, CPU_INTEL_XEON }, + { 0xC0000084, 0xC0000084, CPU_CALL, CPU_INTEL_XEON }, + { 0xC0000100, 0xC0000102, CPU_BASE, CPU_INTEL_XEON }, +}; + +/* AMD Registers Range */ +static struct cpu_debug_range cpu_amd_range[] = { + { 0x00000010, 0x00000010, CPU_TIME, CPU_ALL, }, + { 0x0000001B, 0x0000001B, CPU_APIC, CPU_ALL, }, + { 0x000000FE, 0x000000FE, CPU_MTRR, CPU_ALL, }, + + { 0x00000174, 0x00000176, CPU_SYSENTER, CPU_ALL, }, + { 0x00000179, 0x0000017A, CPU_MC, CPU_ALL, }, + { 0x0000017B, 0x0000017B, CPU_MC, CPU_ALL, }, + { 0x000001D9, 0x000001D9, CPU_DEBUG, CPU_ALL, }, + { 0x000001DB, 0x000001DE, CPU_LBRANCH, CPU_ALL, }, + + { 0x00000200, 0x0000020F, CPU_MTRR, CPU_ALL, }, + { 0x00000250, 0x00000250, CPU_MTRR, CPU_ALL, }, + { 0x00000258, 0x00000259, CPU_MTRR, CPU_ALL, }, + { 0x00000268, 0x0000026F, CPU_MTRR, CPU_ALL, }, + { 0x00000277, 0x00000277, CPU_PAT, CPU_ALL, }, + { 0x000002FF, 0x000002FF, CPU_MTRR, CPU_ALL, }, + + { 0x00000400, 0x00000417, CPU_MC, CPU_ALL, }, + + { 0xC0000080, 0xC0000080, CPU_FEATURES, CPU_ALL, }, + { 0xC0000081, 0xC0000084, CPU_CALL, CPU_ALL, }, + { 0xC0000100, 0xC0000102, CPU_BASE, CPU_ALL, }, + { 0xC0000103, 0xC0000103, CPU_TIME, CPU_ALL, }, + + { 0xC0000408, 0xC000040A, CPU_MC, CPU_ALL, }, + + { 0xc0010000, 0xc0010007, CPU_PMC, CPU_ALL, }, + { 0xc0010010, 0xc0010010, CPU_MTRR, CPU_ALL, }, + { 0xc0010016, 0xc001001A, CPU_MTRR, CPU_ALL, }, + { 0xc001001D, 0xc001001D, CPU_MTRR, CPU_ALL, }, + { 0xc0010030, 0xc0010035, CPU_BIOS, CPU_ALL, }, + { 0xc0010056, 0xc0010056, CPU_SMM, CPU_ALL, }, + { 0xc0010061, 0xc0010063, CPU_SMM, CPU_ALL, }, + { 0xc0010074, 0xc0010074, CPU_MC, CPU_ALL, }, + { 0xc0010111, 0xc0010113, CPU_SMM, CPU_ALL, }, + { 0xc0010114, 0xc0010118, CPU_SVM, CPU_ALL, }, + { 0xc0010119, 0xc001011A, CPU_SMM, CPU_ALL, }, + { 0xc0010140, 0xc0010141, CPU_OSVM, CPU_ALL, }, + { 0xc0010156, 0xc0010156, CPU_SMM, CPU_ALL, }, +}; + + +static int get_cpu_modelflag(unsigned cpu) +{ + int flag; + + switch (per_cpu(cpu_model, cpu)) { + /* Intel */ + case 0x0501: + case 0x0502: + case 0x0504: + flag = CPU_INTEL_PENTIUM; + break; + case 0x0601: + case 0x0603: + case 0x0605: + case 0x0607: + case 0x0608: + case 0x060A: + case 0x060B: + flag = CPU_INTEL_P6; + break; + case 0x0609: + case 0x060D: + flag = CPU_INTEL_PENTIUM_M; + break; + case 0x060E: + flag = CPU_INTEL_CORE; + break; + case 0x060F: + case 0x0617: + flag = CPU_INTEL_CORE2; + break; + case 0x061C: + flag = CPU_INTEL_ATOM; + break; + case 0x0F00: + case 0x0F01: + case 0x0F02: + case 0x0F03: + case 0x0F04: + flag = CPU_INTEL_XEON_P4; + break; + case 0x0F06: + flag = CPU_INTEL_XEON_MP; + break; + default: + flag = CPU_NONE; + break; + } + + return flag; +} + +static int get_cpu_range_count(unsigned cpu) +{ + int index; + + switch (per_cpu(cpu_model, cpu) >> 16) { + case X86_VENDOR_INTEL: + index = ARRAY_SIZE(cpu_intel_range); + break; + case X86_VENDOR_AMD: + index = ARRAY_SIZE(cpu_amd_range); + break; + default: + index = 0; + break; + } + + return index; +} + +static int is_typeflag_valid(unsigned cpu, unsigned flag) +{ + unsigned vendor, modelflag; + int i, index; + + /* Standard Registers should be always valid */ + if (flag >= CPU_TSS) + return 1; + + modelflag = per_cpu(cpu_modelflag, cpu); + vendor = per_cpu(cpu_model, cpu) >> 16; + index = get_cpu_range_count(cpu); + + for (i = 0; i < index; i++) { + switch (vendor) { + case X86_VENDOR_INTEL: + if ((cpu_intel_range[i].model & modelflag) && + (cpu_intel_range[i].flag & flag)) + return 1; + break; + case X86_VENDOR_AMD: + if (cpu_amd_range[i].flag & flag) + return 1; + break; + } + } + + /* Invalid */ + return 0; +} + +static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max, + int index, unsigned flag) +{ + unsigned modelflag; + + modelflag = per_cpu(cpu_modelflag, cpu); + *max = 0; + switch (per_cpu(cpu_model, cpu) >> 16) { + case X86_VENDOR_INTEL: + if ((cpu_intel_range[index].model & modelflag) && + (cpu_intel_range[index].flag & flag)) { + *min = cpu_intel_range[index].min; + *max = cpu_intel_range[index].max; + } + break; + case X86_VENDOR_AMD: + if (cpu_amd_range[index].flag & flag) { + *min = cpu_amd_range[index].min; + *max = cpu_amd_range[index].max; + } + break; + } + + return *max; +} + +/* This function can also be called with seq = NULL for printk */ +static void print_cpu_data(struct seq_file *seq, unsigned type, + u32 low, u32 high) +{ + struct cpu_private *priv; + u64 val = high; + + if (seq) { + priv = seq->private; + if (priv->file) { + val = (val << 32) | low; + seq_printf(seq, "0x%llx\n", val); + } else + seq_printf(seq, " %08x: %08x_%08x\n", + type, high, low); + } else + printk(KERN_INFO " %08x: %08x_%08x\n", type, high, low); +} + +/* This function can also be called with seq = NULL for printk */ +static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag) +{ + unsigned msr, msr_min, msr_max; + struct cpu_private *priv; + u32 low, high; + int i, range; + + if (seq) { + priv = seq->private; + if (priv->file) { + if (!rdmsr_safe_on_cpu(priv->cpu, priv->reg, + &low, &high)) + print_cpu_data(seq, priv->reg, low, high); + return; + } + } + + range = get_cpu_range_count(cpu); + + for (i = 0; i < range; i++) { + if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag)) + continue; + + for (msr = msr_min; msr <= msr_max; msr++) { + if (rdmsr_safe_on_cpu(cpu, msr, &low, &high)) + continue; + print_cpu_data(seq, msr, low, high); + } + } +} + +static void print_tss(void *arg) +{ + struct pt_regs *regs = task_pt_regs(current); + struct seq_file *seq = arg; + unsigned int seg; + + seq_printf(seq, " RAX\t: %016lx\n", regs->ax); + seq_printf(seq, " RBX\t: %016lx\n", regs->bx); + seq_printf(seq, " RCX\t: %016lx\n", regs->cx); + seq_printf(seq, " RDX\t: %016lx\n", regs->dx); + + seq_printf(seq, " RSI\t: %016lx\n", regs->si); + seq_printf(seq, " RDI\t: %016lx\n", regs->di); + seq_printf(seq, " RBP\t: %016lx\n", regs->bp); + seq_printf(seq, " ESP\t: %016lx\n", regs->sp); + +#ifdef CONFIG_X86_64 + seq_printf(seq, " R08\t: %016lx\n", regs->r8); + seq_printf(seq, " R09\t: %016lx\n", regs->r9); + seq_printf(seq, " R10\t: %016lx\n", regs->r10); + seq_printf(seq, " R11\t: %016lx\n", regs->r11); + seq_printf(seq, " R12\t: %016lx\n", regs->r12); + seq_printf(seq, " R13\t: %016lx\n", regs->r13); + seq_printf(seq, " R14\t: %016lx\n", regs->r14); + seq_printf(seq, " R15\t: %016lx\n", regs->r15); +#endif + + asm("movl %%cs,%0" : "=r" (seg)); + seq_printf(seq, " CS\t: %04x\n", seg); + asm("movl %%ds,%0" : "=r" (seg)); + seq_printf(seq, " DS\t: %04x\n", seg); + seq_printf(seq, " SS\t: %04lx\n", regs->ss); + asm("movl %%es,%0" : "=r" (seg)); + seq_printf(seq, " ES\t: %04x\n", seg); + asm("movl %%fs,%0" : "=r" (seg)); + seq_printf(seq, " FS\t: %04x\n", seg); + asm("movl %%gs,%0" : "=r" (seg)); + seq_printf(seq, " GS\t: %04x\n", seg); + + seq_printf(seq, " EFLAGS\t: %016lx\n", regs->flags); + + seq_printf(seq, " EIP\t: %016lx\n", regs->ip); +} + +static void print_cr(void *arg) +{ + struct seq_file *seq = arg; + + seq_printf(seq, " cr0\t: %016lx\n", read_cr0()); + seq_printf(seq, " cr2\t: %016lx\n", read_cr2()); + seq_printf(seq, " cr3\t: %016lx\n", read_cr3()); + seq_printf(seq, " cr4\t: %016lx\n", read_cr4_safe()); +#ifdef CONFIG_X86_64 + seq_printf(seq, " cr8\t: %016lx\n", read_cr8()); +#endif +} + +static void print_desc_ptr(char *str, struct seq_file *seq, struct desc_ptr dt) +{ + seq_printf(seq, " %s\t: %016llx\n", str, (u64)(dt.address | dt.size)); +} + +static void print_dt(void *seq) +{ + struct desc_ptr dt; + unsigned long ldt; + + /* IDT */ + store_idt((struct desc_ptr *)&dt); + print_desc_ptr("IDT", seq, dt); + + /* GDT */ + store_gdt((struct desc_ptr *)&dt); + print_desc_ptr("GDT", seq, dt); + + /* LDT */ + store_ldt(ldt); + seq_printf(seq, " LDT\t: %016lx\n", ldt); + + /* TR */ + store_tr(ldt); + seq_printf(seq, " TR\t: %016lx\n", ldt); +} + +static void print_dr(void *arg) +{ + struct seq_file *seq = arg; + unsigned long dr; + int i; + + for (i = 0; i < 8; i++) { + /* Ignore db4, db5 */ + if ((i == 4) || (i == 5)) + continue; + get_debugreg(dr, i); + seq_printf(seq, " dr%d\t: %016lx\n", i, dr); + } + + seq_printf(seq, "\n MSR\t:\n"); +} + +static void print_apic(void *arg) +{ + struct seq_file *seq = arg; + +#ifdef CONFIG_X86_LOCAL_APIC + seq_printf(seq, " LAPIC\t:\n"); + seq_printf(seq, " ID\t\t: %08x\n", apic_read(APIC_ID) >> 24); + seq_printf(seq, " LVR\t\t: %08x\n", apic_read(APIC_LVR)); + seq_printf(seq, " TASKPRI\t: %08x\n", apic_read(APIC_TASKPRI)); + seq_printf(seq, " ARBPRI\t\t: %08x\n", apic_read(APIC_ARBPRI)); + seq_printf(seq, " PROCPRI\t: %08x\n", apic_read(APIC_PROCPRI)); + seq_printf(seq, " LDR\t\t: %08x\n", apic_read(APIC_LDR)); + seq_printf(seq, " DFR\t\t: %08x\n", apic_read(APIC_DFR)); + seq_printf(seq, " SPIV\t\t: %08x\n", apic_read(APIC_SPIV)); + seq_printf(seq, " ISR\t\t: %08x\n", apic_read(APIC_ISR)); + seq_printf(seq, " ESR\t\t: %08x\n", apic_read(APIC_ESR)); + seq_printf(seq, " ICR\t\t: %08x\n", apic_read(APIC_ICR)); + seq_printf(seq, " ICR2\t\t: %08x\n", apic_read(APIC_ICR2)); + seq_printf(seq, " LVTT\t\t: %08x\n", apic_read(APIC_LVTT)); + seq_printf(seq, " LVTTHMR\t: %08x\n", apic_read(APIC_LVTTHMR)); + seq_printf(seq, " LVTPC\t\t: %08x\n", apic_read(APIC_LVTPC)); + seq_printf(seq, " LVT0\t\t: %08x\n", apic_read(APIC_LVT0)); + seq_printf(seq, " LVT1\t\t: %08x\n", apic_read(APIC_LVT1)); + seq_printf(seq, " LVTERR\t\t: %08x\n", apic_read(APIC_LVTERR)); + seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT)); + seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT)); + seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR)); +#endif /* CONFIG_X86_LOCAL_APIC */ + + seq_printf(seq, "\n MSR\t:\n"); +} + +static int cpu_seq_show(struct seq_file *seq, void *v) +{ + struct cpu_private *priv = seq->private; + + if (priv == NULL) + return -EINVAL; + + switch (cpu_base[priv->type].flag) { + case CPU_TSS: + smp_call_function_single(priv->cpu, print_tss, seq, 1); + break; + case CPU_CR: + smp_call_function_single(priv->cpu, print_cr, seq, 1); + break; + case CPU_DT: + smp_call_function_single(priv->cpu, print_dt, seq, 1); + break; + case CPU_DEBUG: + if (priv->file == CPU_INDEX_BIT) + smp_call_function_single(priv->cpu, print_dr, seq, 1); + print_msr(seq, priv->cpu, cpu_base[priv->type].flag); + break; + case CPU_APIC: + if (priv->file == CPU_INDEX_BIT) + smp_call_function_single(priv->cpu, print_apic, seq, 1); + print_msr(seq, priv->cpu, cpu_base[priv->type].flag); + break; + + default: + print_msr(seq, priv->cpu, cpu_base[priv->type].flag); + break; + } + seq_printf(seq, "\n"); + + return 0; +} + +static void *cpu_seq_start(struct seq_file *seq, loff_t *pos) +{ + if (*pos == 0) /* One time is enough ;-) */ + return seq; + + return NULL; +} + +static void *cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + (*pos)++; + + return cpu_seq_start(seq, pos); +} + +static void cpu_seq_stop(struct seq_file *seq, void *v) +{ +} + +static const struct seq_operations cpu_seq_ops = { + .start = cpu_seq_start, + .next = cpu_seq_next, + .stop = cpu_seq_stop, + .show = cpu_seq_show, +}; + +static int cpu_seq_open(struct inode *inode, struct file *file) +{ + struct cpu_private *priv = inode->i_private; + struct seq_file *seq; + int err; + + err = seq_open(file, &cpu_seq_ops); + if (!err) { + seq = file->private_data; + seq->private = priv; + } + + return err; +} + +static const struct file_operations cpu_fops = { + .open = cpu_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg, + unsigned file, struct dentry *dentry) +{ + struct cpu_private *priv = NULL; + + /* Already intialized */ + if (file == CPU_INDEX_BIT) + if (per_cpu(cpu_arr[type].init, cpu)) + return 0; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + priv->cpu = cpu; + priv->type = type; + priv->reg = reg; + priv->file = file; + mutex_lock(&cpu_debug_lock); + per_cpu(priv_arr[type], cpu) = priv; + per_cpu(cpu_priv_count, cpu)++; + mutex_unlock(&cpu_debug_lock); + + if (file) + debugfs_create_file(cpu_file[file].name, S_IRUGO, + dentry, (void *)priv, &cpu_fops); + else { + debugfs_create_file(cpu_base[type].name, S_IRUGO, + per_cpu(cpu_arr[type].dentry, cpu), + (void *)priv, &cpu_fops); + mutex_lock(&cpu_debug_lock); + per_cpu(cpu_arr[type].init, cpu) = 1; + mutex_unlock(&cpu_debug_lock); + } + + return 0; +} + +static int cpu_init_regfiles(unsigned cpu, unsigned int type, unsigned reg, + struct dentry *dentry) +{ + unsigned file; + int err = 0; + + for (file = 0; file < ARRAY_SIZE(cpu_file); file++) { + err = cpu_create_file(cpu, type, reg, file, dentry); + if (err) + return err; + } + + return err; +} + +static int cpu_init_msr(unsigned cpu, unsigned type, struct dentry *dentry) +{ + struct dentry *cpu_dentry = NULL; + unsigned reg, reg_min, reg_max; + int i, range, err = 0; + char reg_dir[12]; + u32 low, high; + + range = get_cpu_range_count(cpu); + + for (i = 0; i < range; i++) { + if (!get_cpu_range(cpu, ®_min, ®_max, i, + cpu_base[type].flag)) + continue; + + for (reg = reg_min; reg <= reg_max; reg++) { + if (rdmsr_safe_on_cpu(cpu, reg, &low, &high)) + continue; + + sprintf(reg_dir, "0x%x", reg); + cpu_dentry = debugfs_create_dir(reg_dir, dentry); + err = cpu_init_regfiles(cpu, type, reg, cpu_dentry); + if (err) + return err; + } + } + + return err; +} + +static int cpu_init_allreg(unsigned cpu, struct dentry *dentry) +{ + struct dentry *cpu_dentry = NULL; + unsigned type; + int err = 0; + + for (type = 0; type < ARRAY_SIZE(cpu_base) - 1; type++) { + if (!is_typeflag_valid(cpu, cpu_base[type].flag)) + continue; + cpu_dentry = debugfs_create_dir(cpu_base[type].name, dentry); + per_cpu(cpu_arr[type].dentry, cpu) = cpu_dentry; + + if (type < CPU_TSS_BIT) + err = cpu_init_msr(cpu, type, cpu_dentry); + else + err = cpu_create_file(cpu, type, 0, CPU_INDEX_BIT, + cpu_dentry); + if (err) + return err; + } + + return err; +} + +static int cpu_init_cpu(void) +{ + struct dentry *cpu_dentry = NULL; + struct cpuinfo_x86 *cpui; + char cpu_dir[12]; + unsigned cpu; + int err = 0; + + for (cpu = 0; cpu < nr_cpu_ids; cpu++) { + cpui = &cpu_data(cpu); + if (!cpu_has(cpui, X86_FEATURE_MSR)) + continue; + per_cpu(cpu_model, cpu) = ((cpui->x86_vendor << 16) | + (cpui->x86 << 8) | + (cpui->x86_model)); + per_cpu(cpu_modelflag, cpu) = get_cpu_modelflag(cpu); + + sprintf(cpu_dir, "cpu%d", cpu); + cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir); + err = cpu_init_allreg(cpu, cpu_dentry); + + pr_info("cpu%d(%d) debug files %d\n", + cpu, nr_cpu_ids, per_cpu(cpu_priv_count, cpu)); + if (per_cpu(cpu_priv_count, cpu) > MAX_CPU_FILES) { + pr_err("Register files count %d exceeds limit %d\n", + per_cpu(cpu_priv_count, cpu), MAX_CPU_FILES); + per_cpu(cpu_priv_count, cpu) = MAX_CPU_FILES; + err = -ENFILE; + } + if (err) + return err; + } + + return err; +} + +static int __init cpu_debug_init(void) +{ + cpu_debugfs_dir = debugfs_create_dir("cpu", arch_debugfs_dir); + + return cpu_init_cpu(); +} + +static void __exit cpu_debug_exit(void) +{ + int i, cpu; + + if (cpu_debugfs_dir) + debugfs_remove_recursive(cpu_debugfs_dir); + + for (cpu = 0; cpu < nr_cpu_ids; cpu++) + for (i = 0; i < per_cpu(cpu_priv_count, cpu); i++) + kfree(per_cpu(priv_arr[i], cpu)); +} + +module_init(cpu_debug_init); +module_exit(cpu_debug_exit); + +MODULE_AUTHOR("Jaswinder Singh Rajput"); +MODULE_DESCRIPTION("CPU Debug module"); +MODULE_LICENSE("GPL"); -- cgit From fef3a7a17418814733ebde0b40d8e32747677c8f Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Tue, 10 Mar 2009 10:56:57 +0800 Subject: x86, kexec: fix kexec x86 coding style Impact: Cleanup Fix some coding style issue for kexec x86. Signed-off-by: Huang Ying Signed-off-by: H. Peter Anvin --- arch/x86/kernel/machine_kexec_32.c | 17 ++++++++++------- arch/x86/kernel/machine_kexec_64.c | 15 ++++++++------- arch/x86/kernel/relocate_kernel_32.S | 24 ++++++++++++++++-------- arch/x86/kernel/relocate_kernel_64.S | 24 ++++++++++++++++-------- 4 files changed, 50 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index f5fc8c781a6..e7368c1da01 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -14,12 +14,12 @@ #include #include #include +#include #include #include #include #include -#include #include #include #include @@ -63,7 +63,7 @@ static void load_segments(void) "\tmovl %%eax,%%fs\n" "\tmovl %%eax,%%gs\n" "\tmovl %%eax,%%ss\n" - ::: "eax", "memory"); + : : : "eax", "memory"); #undef STR #undef __STR } @@ -205,7 +205,8 @@ void machine_kexec(struct kimage *image) if (image->preserve_context) { #ifdef CONFIG_X86_IO_APIC - /* We need to put APICs in legacy mode so that we can + /* + * We need to put APICs in legacy mode so that we can * get timer interrupts in second kernel. kexec/kdump * paths already have calls to disable_IO_APIC() in * one form or other. kexec jump path also need @@ -227,7 +228,8 @@ void machine_kexec(struct kimage *image) page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT); - /* The segment registers are funny things, they have both a + /* + * The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is * set to a specific selector, the invisible part is loaded * with from a table in memory. At no other time is the @@ -237,11 +239,12 @@ void machine_kexec(struct kimage *image) * segments, before I zap the gdt with an invalid value. */ load_segments(); - /* The gdt & idt are now invalid. + /* + * The gdt & idt are now invalid. * If you want to load them you must set up your own idt & gdt. */ - set_gdt(phys_to_virt(0),0); - set_idt(phys_to_virt(0),0); + set_gdt(phys_to_virt(0), 0); + set_idt(phys_to_virt(0), 0); /* now call it */ image->start = relocate_kernel_ptr((unsigned long)image->head, diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 6993d51b7fd..f8c796fffa0 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -12,11 +12,11 @@ #include #include #include +#include #include #include #include -#include static void init_level2_page(pmd_t *level2p, unsigned long addr) { @@ -83,9 +83,8 @@ static int init_level4_page(struct kimage *image, pgd_t *level4p, } level3p = (pud_t *)page_address(page); result = init_level3_page(image, level3p, addr, last_addr); - if (result) { + if (result) goto out; - } set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE)); addr += PGDIR_SIZE; } @@ -242,7 +241,8 @@ void machine_kexec(struct kimage *image) page_list[PA_TABLE_PAGE] = (unsigned long)__pa(page_address(image->control_code_page)); - /* The segment registers are funny things, they have both a + /* + * The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is * set to a specific selector, the invisible part is loaded * with from a table in memory. At no other time is the @@ -252,11 +252,12 @@ void machine_kexec(struct kimage *image) * segments, before I zap the gdt with an invalid value. */ load_segments(); - /* The gdt & idt are now invalid. + /* + * The gdt & idt are now invalid. * If you want to load them you must set up your own idt & gdt. */ - set_gdt(phys_to_virt(0),0); - set_idt(phys_to_virt(0),0); + set_gdt(phys_to_virt(0), 0); + set_idt(phys_to_virt(0), 0); /* now call it */ relocate_kernel((unsigned long)image->head, (unsigned long)page_list, diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S index 2064d0aa8d2..41235531b11 100644 --- a/arch/x86/kernel/relocate_kernel_32.S +++ b/arch/x86/kernel/relocate_kernel_32.S @@ -17,7 +17,8 @@ #define PTR(x) (x << 2) -/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE +/* + * control_page + KEXEC_CONTROL_CODE_MAX_SIZE * ~ control_page + PAGE_SIZE are used as data storage and stack for * jumping back */ @@ -76,8 +77,10 @@ relocate_kernel: movl %eax, CP_PA_SWAP_PAGE(%edi) movl %ebx, CP_PA_BACKUP_PAGES_MAP(%edi) - /* get physical address of control page now */ - /* this is impossible after page table switch */ + /* + * get physical address of control page now + * this is impossible after page table switch + */ movl PTR(PA_CONTROL_PAGE)(%ebp), %edi /* switch to new set of page tables */ @@ -97,7 +100,8 @@ identity_mapped: /* store the start address on the stack */ pushl %edx - /* Set cr0 to a known state: + /* + * Set cr0 to a known state: * - Paging disabled * - Alignment check disabled * - Write protect disabled @@ -113,7 +117,8 @@ identity_mapped: /* clear cr4 if applicable */ testl %ecx, %ecx jz 1f - /* Set cr4 to a known state: + /* + * Set cr4 to a known state: * Setting everything to zero seems safe. */ xorl %eax, %eax @@ -132,15 +137,18 @@ identity_mapped: call swap_pages addl $8, %esp - /* To be certain of avoiding problems with self-modifying code + /* + * To be certain of avoiding problems with self-modifying code * I need to execute a serializing instruction here. * So I flush the TLB, it's handy, and not processor dependent. */ xorl %eax, %eax movl %eax, %cr3 - /* set all of the registers to known values */ - /* leave %esp alone */ + /* + * set all of the registers to known values + * leave %esp alone + */ testl %esi, %esi jnz 1f diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S index d32cfb27a47..cfc0d24003d 100644 --- a/arch/x86/kernel/relocate_kernel_64.S +++ b/arch/x86/kernel/relocate_kernel_64.S @@ -24,7 +24,8 @@ .code64 .globl relocate_kernel relocate_kernel: - /* %rdi indirection_page + /* + * %rdi indirection_page * %rsi page_list * %rdx start address */ @@ -33,8 +34,10 @@ relocate_kernel: pushq $0 popfq - /* get physical address of control page now */ - /* this is impossible after page table switch */ + /* + * get physical address of control page now + * this is impossible after page table switch + */ movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 /* get physical address of page table now too */ @@ -55,7 +58,8 @@ identity_mapped: /* store the start address on the stack */ pushq %rdx - /* Set cr0 to a known state: + /* + * Set cr0 to a known state: * - Paging enabled * - Alignment check disabled * - Write protect disabled @@ -68,7 +72,8 @@ identity_mapped: orl $(X86_CR0_PG | X86_CR0_PE), %eax movq %rax, %cr0 - /* Set cr4 to a known state: + /* + * Set cr4 to a known state: * - physical address extension enabled */ movq $X86_CR4_PAE, %rax @@ -117,7 +122,8 @@ identity_mapped: jmp 0b 3: - /* To be certain of avoiding problems with self-modifying code + /* + * To be certain of avoiding problems with self-modifying code * I need to execute a serializing instruction here. * So I flush the TLB by reloading %cr3 here, it's handy, * and not processor dependent. @@ -125,8 +131,10 @@ identity_mapped: movq %cr3, %rax movq %rax, %cr3 - /* set all of the registers to known values */ - /* leave %rsp alone */ + /* + * set all of the registers to known values + * leave %rsp alone + */ xorq %rax, %rax xorq %rbx, %rbx -- cgit From 5359454701ce51a4626b1ef6eb7b16ec35bd458d Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Tue, 10 Mar 2009 10:57:04 +0800 Subject: x86, kexec: x86_64: add identity map for pages at image->start Impact: Fix corner case that cannot yet occur image->start may be outside of 0 ~ max_pfn, for example when jumping back to original kernel from kexeced kenrel. This patch add identity map for pages at image->start. Signed-off-by: Huang Ying Signed-off-by: H. Peter Anvin --- arch/x86/kernel/machine_kexec_64.c | 42 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index f8c796fffa0..7cc5d3d0148 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -18,6 +18,41 @@ #include #include +static int init_one_level2_page(struct kimage *image, pgd_t *pgd, + unsigned long addr) +{ + pud_t *pud; + pmd_t *pmd; + struct page *page; + int result = -ENOMEM; + + addr &= PMD_MASK; + pgd += pgd_index(addr); + if (!pgd_present(*pgd)) { + page = kimage_alloc_control_pages(image, 0); + if (!page) + goto out; + pud = (pud_t *)page_address(page); + memset(pud, 0, PAGE_SIZE); + set_pgd(pgd, __pgd(__pa(pud) | _KERNPG_TABLE)); + } + pud = pud_offset(pgd, addr); + if (!pud_present(*pud)) { + page = kimage_alloc_control_pages(image, 0); + if (!page) + goto out; + pmd = (pmd_t *)page_address(page); + memset(pmd, 0, PAGE_SIZE); + set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE)); + } + pmd = pmd_offset(pud, addr); + if (!pmd_present(*pmd)) + set_pmd(pmd, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC)); + result = 0; +out: + return result; +} + static void init_level2_page(pmd_t *level2p, unsigned long addr) { unsigned long end_addr; @@ -153,6 +188,13 @@ static int init_pgtable(struct kimage *image, unsigned long start_pgtable) int result; level4p = (pgd_t *)__va(start_pgtable); result = init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT); + if (result) + return result; + /* + * image->start may be outside 0 ~ max_pfn, for example when + * jump back to original kernel from kexeced kernel + */ + result = init_one_level2_page(image, level4p, image->start); if (result) return result; return init_transition_pgtable(image, level4p); -- cgit From fee7b0d84cc8c7bc5dc212901c79e93eaf83a5b5 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Tue, 10 Mar 2009 10:57:16 +0800 Subject: x86, kexec: x86_64: add kexec jump support for x86_64 Impact: New major feature This patch add kexec jump support for x86_64. More information about kexec jump can be found in corresponding x86_32 support patch. Signed-off-by: Huang Ying Signed-off-by: H. Peter Anvin --- arch/x86/Kconfig | 2 +- arch/x86/include/asm/kexec.h | 13 +-- arch/x86/kernel/machine_kexec_64.c | 42 ++++++++- arch/x86/kernel/relocate_kernel_64.S | 177 ++++++++++++++++++++++++++++------- arch/x86/kernel/vmlinux_64.lds.S | 7 ++ 5 files changed, 197 insertions(+), 44 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 31758378bcd..87717f3687d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1431,7 +1431,7 @@ config CRASH_DUMP config KEXEC_JUMP bool "kexec jump (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on KEXEC && HIBERNATION && X86_32 + depends on KEXEC && HIBERNATION ---help--- Jump between original kernel and kexeced kernel and invoke code in physical address mode via KEXEC diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h index 0ceb6d19ed3..317ff1703d0 100644 --- a/arch/x86/include/asm/kexec.h +++ b/arch/x86/include/asm/kexec.h @@ -9,13 +9,13 @@ # define PAGES_NR 4 #else # define PA_CONTROL_PAGE 0 -# define PA_TABLE_PAGE 1 -# define PAGES_NR 2 +# define VA_CONTROL_PAGE 1 +# define PA_TABLE_PAGE 2 +# define PA_SWAP_PAGE 3 +# define PAGES_NR 4 #endif -#ifdef CONFIG_X86_32 # define KEXEC_CONTROL_CODE_MAX_SIZE 2048 -#endif #ifndef __ASSEMBLY__ @@ -136,10 +136,11 @@ relocate_kernel(unsigned long indirection_page, unsigned int has_pae, unsigned int preserve_context); #else -NORET_TYPE void +unsigned long relocate_kernel(unsigned long indirection_page, unsigned long page_list, - unsigned long start_address) ATTRIB_NORET; + unsigned long start_address, + unsigned int preserve_context); #endif #define ARCH_HAS_KIMAGE_ARCH diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 7cc5d3d0148..89cea4d4467 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -270,19 +271,43 @@ void machine_kexec(struct kimage *image) { unsigned long page_list[PAGES_NR]; void *control_page; + int save_ftrace_enabled; - tracer_disable(); +#ifdef CONFIG_KEXEC_JUMP + if (kexec_image->preserve_context) + save_processor_state(); +#endif + + save_ftrace_enabled = __ftrace_enabled_save(); /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); + if (image->preserve_context) { +#ifdef CONFIG_X86_IO_APIC + /* + * We need to put APICs in legacy mode so that we can + * get timer interrupts in second kernel. kexec/kdump + * paths already have calls to disable_IO_APIC() in + * one form or other. kexec jump path also need + * one. + */ + disable_IO_APIC(); +#endif + } + control_page = page_address(image->control_code_page) + PAGE_SIZE; - memcpy(control_page, relocate_kernel, PAGE_SIZE); + memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE); page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page); + page_list[VA_CONTROL_PAGE] = (unsigned long)control_page; page_list[PA_TABLE_PAGE] = (unsigned long)__pa(page_address(image->control_code_page)); + if (image->type == KEXEC_TYPE_DEFAULT) + page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) + << PAGE_SHIFT); + /* * The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is @@ -302,8 +327,17 @@ void machine_kexec(struct kimage *image) set_idt(phys_to_virt(0), 0); /* now call it */ - relocate_kernel((unsigned long)image->head, (unsigned long)page_list, - image->start); + image->start = relocate_kernel((unsigned long)image->head, + (unsigned long)page_list, + image->start, + image->preserve_context); + +#ifdef CONFIG_KEXEC_JUMP + if (kexec_image->preserve_context) + restore_processor_state(); +#endif + + __ftrace_enabled_restore(save_ftrace_enabled); } void arch_crash_save_vmcoreinfo(void) diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S index cfc0d24003d..4de8f5b3d47 100644 --- a/arch/x86/kernel/relocate_kernel_64.S +++ b/arch/x86/kernel/relocate_kernel_64.S @@ -19,6 +19,24 @@ #define PTR(x) (x << 3) #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) +/* + * control_page + KEXEC_CONTROL_CODE_MAX_SIZE + * ~ control_page + PAGE_SIZE are used as data storage and stack for + * jumping back + */ +#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset)) + +/* Minimal CPU state */ +#define RSP DATA(0x0) +#define CR0 DATA(0x8) +#define CR3 DATA(0x10) +#define CR4 DATA(0x18) + +/* other data */ +#define CP_PA_TABLE_PAGE DATA(0x20) +#define CP_PA_SWAP_PAGE DATA(0x28) +#define CP_PA_BACKUP_PAGES_MAP DATA(0x30) + .text .align PAGE_SIZE .code64 @@ -28,8 +46,27 @@ relocate_kernel: * %rdi indirection_page * %rsi page_list * %rdx start address + * %rcx preserve_context */ + /* Save the CPU context, used for jumping back */ + pushq %rbx + pushq %rbp + pushq %r12 + pushq %r13 + pushq %r14 + pushq %r15 + pushf + + movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 + movq %rsp, RSP(%r11) + movq %cr0, %rax + movq %rax, CR0(%r11) + movq %cr3, %rax + movq %rax, CR3(%r11) + movq %cr4, %rax + movq %rax, CR4(%r11) + /* zero out flags, and disable interrupts */ pushq $0 popfq @@ -41,10 +78,18 @@ relocate_kernel: movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 /* get physical address of page table now too */ - movq PTR(PA_TABLE_PAGE)(%rsi), %rcx + movq PTR(PA_TABLE_PAGE)(%rsi), %r9 + + /* get physical address of swap page now */ + movq PTR(PA_SWAP_PAGE)(%rsi), %r10 + + /* save some information for jumping back */ + movq %r9, CP_PA_TABLE_PAGE(%r11) + movq %r10, CP_PA_SWAP_PAGE(%r11) + movq %rdi, CP_PA_BACKUP_PAGES_MAP(%r11) /* Switch to the identity mapped page tables */ - movq %rcx, %cr3 + movq %r9, %cr3 /* setup a new stack at the end of the physical control page */ lea PAGE_SIZE(%r8), %rsp @@ -83,9 +128,87 @@ identity_mapped: 1: /* Flush the TLB (needed?) */ - movq %rcx, %cr3 + movq %r9, %cr3 + + movq %rcx, %r11 + call swap_pages + + /* + * To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB by reloading %cr3 here, it's handy, + * and not processor dependent. + */ + movq %cr3, %rax + movq %rax, %cr3 + + /* + * set all of the registers to known values + * leave %rsp alone + */ + + testq %r11, %r11 + jnz 1f + xorq %rax, %rax + xorq %rbx, %rbx + xorq %rcx, %rcx + xorq %rdx, %rdx + xorq %rsi, %rsi + xorq %rdi, %rdi + xorq %rbp, %rbp + xorq %r8, %r8 + xorq %r9, %r9 + xorq %r10, %r9 + xorq %r11, %r11 + xorq %r12, %r12 + xorq %r13, %r13 + xorq %r14, %r14 + xorq %r15, %r15 + + ret + +1: + popq %rdx + leaq PAGE_SIZE(%r10), %rsp + call *%rdx + + /* get the re-entry point of the peer system */ + movq 0(%rsp), %rbp + call 1f +1: + popq %r8 + subq $(1b - relocate_kernel), %r8 + movq CP_PA_SWAP_PAGE(%r8), %r10 + movq CP_PA_BACKUP_PAGES_MAP(%r8), %rdi + movq CP_PA_TABLE_PAGE(%r8), %rax + movq %rax, %cr3 + lea PAGE_SIZE(%r8), %rsp + call swap_pages + movq $virtual_mapped, %rax + pushq %rax + ret + +virtual_mapped: + movq RSP(%r8), %rsp + movq CR4(%r8), %rax + movq %rax, %cr4 + movq CR3(%r8), %rax + movq CR0(%r8), %r8 + movq %rax, %cr3 + movq %r8, %cr0 + movq %rbp, %rax + + popf + popq %r15 + popq %r14 + popq %r13 + popq %r12 + popq %rbp + popq %rbx + ret /* Do the copies */ +swap_pages: movq %rdi, %rcx /* Put the page_list in %rcx */ xorq %rdi, %rdi xorq %rsi, %rsi @@ -117,39 +240,27 @@ identity_mapped: movq %rcx, %rsi /* For ever source page do a copy */ andq $0xfffffffffffff000, %rsi + movq %rdi, %rdx + movq %rsi, %rax + + movq %r10, %rdi movq $512, %rcx rep ; movsq - jmp 0b -3: - /* - * To be certain of avoiding problems with self-modifying code - * I need to execute a serializing instruction here. - * So I flush the TLB by reloading %cr3 here, it's handy, - * and not processor dependent. - */ - movq %cr3, %rax - movq %rax, %cr3 - - /* - * set all of the registers to known values - * leave %rsp alone - */ + movq %rax, %rdi + movq %rdx, %rsi + movq $512, %rcx + rep ; movsq - xorq %rax, %rax - xorq %rbx, %rbx - xorq %rcx, %rcx - xorq %rdx, %rdx - xorq %rsi, %rsi - xorq %rdi, %rdi - xorq %rbp, %rbp - xorq %r8, %r8 - xorq %r9, %r9 - xorq %r10, %r9 - xorq %r11, %r11 - xorq %r12, %r12 - xorq %r13, %r13 - xorq %r14, %r14 - xorq %r15, %r15 + movq %rdx, %rdi + movq %r10, %rsi + movq $512, %rcx + rep ; movsq + lea PAGE_SIZE(%rax), %rsi + jmp 0b +3: ret + + .globl kexec_control_code_size +.set kexec_control_code_size, . - relocate_kernel diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fbfced6f680..5bf54e40c6e 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -275,3 +275,10 @@ ASSERT((_end - _text <= KERNEL_IMAGE_SIZE), ASSERT((per_cpu__irq_stack_union == 0), "irq_stack_union is not at start of per-cpu area"); #endif + +#ifdef CONFIG_KEXEC +#include + +ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, + "kexec control code size is too big") +#endif -- cgit From 5490fa96735ce0e2af270c0868987d644b9a38ec Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Wed, 11 Mar 2009 10:14:26 +0900 Subject: x86, mce: use round_jiffies() instead round_jiffies_relative() Impact: saving power _very_ little round_jiffies() round up absolute jiffies to full second. round_jiffies_relative() round up relative jiffies to full second. The "t->expires" is absolute jiffies. Then, round_jiffies() should be used instead round_jiffies_relative(). Signed-off-by: KOSAKI Motohiro Cc: Andi Kleen Cc: H. Peter Anvin Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/mcheck/mce_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index bfbd5323a63..ca14604611e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -639,7 +639,7 @@ static void mce_init_timer(void) if (!next_interval) return; setup_timer(t, mcheck_timer, smp_processor_id()); - t->expires = round_jiffies_relative(jiffies + next_interval); + t->expires = round_jiffies(jiffies + next_interval); add_timer(t); } @@ -1110,7 +1110,7 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb, break; case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: - t->expires = round_jiffies_relative(jiffies + next_interval); + t->expires = round_jiffies(jiffies + next_interval); add_timer_on(t, cpu); smp_call_function_single(cpu, mce_reenable_cpu, &action, 1); break; -- cgit From bf5172d07ac38e538e01143289e9b46076494ad5 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 9 Mar 2009 22:04:45 +0100 Subject: x86: convert obsolete irq_desc_t typedef to struct irq_desc Impact: cleanup Convert the last remaining users. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/visws_quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c index 191a876e9e8..31ffc24eec4 100644 --- a/arch/x86/kernel/visws_quirks.c +++ b/arch/x86/kernel/visws_quirks.c @@ -578,7 +578,7 @@ static struct irq_chip piix4_virtual_irq_type = { static irqreturn_t piix4_master_intr(int irq, void *dev_id) { int realirq; - irq_desc_t *desc; + struct irq_desc *desc; unsigned long flags; spin_lock_irqsave(&i8259A_lock, flags); -- cgit From bb7f5f6c26d0a304fb3af92591a1dddd39b6ac61 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 9 Mar 2009 20:19:51 +0300 Subject: x86: shrink __ALIGN and __ALIGN_STR definitions Impact: cleanup 1) .p2align 4 and .align 16 are the same meaning (until a.out format for i386 is used which is not our case for CONFIG_X86_ALIGNMENT_16 anyway) 2) having 15 as max allowed bytes to be skipped does not make sense on modulo 16 Signed-off-by: Cyrill Gorcunov LKML-Reference: <20090309171951.GE9945@localhost> [ small cleanup, use __stringify(), etc. ] Signed-off-by: Ingo Molnar --- arch/x86/include/asm/linkage.h | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h index a0d70b46c27..12d55e773eb 100644 --- a/arch/x86/include/asm/linkage.h +++ b/arch/x86/include/asm/linkage.h @@ -1,6 +1,8 @@ #ifndef _ASM_X86_LINKAGE_H #define _ASM_X86_LINKAGE_H +#include + #undef notrace #define notrace __attribute__((no_instrument_function)) @@ -53,14 +55,9 @@ .globl name; \ name: -#ifdef CONFIG_X86_64 -#define __ALIGN .p2align 4,,15 -#define __ALIGN_STR ".p2align 4,,15" -#endif - -#ifdef CONFIG_X86_ALIGNMENT_16 -#define __ALIGN .align 16,0x90 -#define __ALIGN_STR ".align 16,0x90" +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_ALIGNMENT_16) +#define __ALIGN .p2align 4, 0x90 +#define __ALIGN_STR __stringify(__ALIGN) #endif #endif /* __ASSEMBLY__ */ -- cgit From 8229d754383e8cd905c38b56bd7365c7fc10dfc1 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Wed, 11 Mar 2009 19:13:49 +0530 Subject: x86: cpu architecture debug code, build fix, cleanup move store_ldt outside the CONFIG_PARAVIRT section and also clean up the code a bit. Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Ingo Molnar --- arch/x86/include/asm/desc.h | 3 ++- arch/x86/kernel/cpu/cpu_debug.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index dc27705f544..5623c50d67b 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -91,7 +91,6 @@ static inline int desc_empty(const void *ptr) #define store_gdt(dtr) native_store_gdt(dtr) #define store_idt(dtr) native_store_idt(dtr) #define store_tr(tr) (tr = native_store_tr()) -#define store_ldt(ldt) asm("sldt %0":"=m" (ldt)) #define load_TLS(t, cpu) native_load_tls(t, cpu) #define set_ldt native_set_ldt @@ -112,6 +111,8 @@ static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries) } #endif /* CONFIG_PARAVIRT */ +#define store_ldt(ldt) asm("sldt %0" : "=m"(ldt)) + static inline void native_write_idt_entry(gate_desc *idt, int entry, const gate_desc *gate) { diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c index 0bdf4daba20..9abbcbd933c 100755 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ b/arch/x86/kernel/cpu/cpu_debug.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -427,7 +428,7 @@ static void print_tss(void *arg) seq_printf(seq, " CS\t: %04x\n", seg); asm("movl %%ds,%0" : "=r" (seg)); seq_printf(seq, " DS\t: %04x\n", seg); - seq_printf(seq, " SS\t: %04lx\n", regs->ss); + seq_printf(seq, " SS\t: %04lx\n", regs->ss & 0xffff); asm("movl %%es,%0" : "=r" (seg)); seq_printf(seq, " ES\t: %04x\n", seg); asm("movl %%fs,%0" : "=r" (seg)); -- cgit From bb6d59ca927d855ffac567b35c0a790c67016103 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Wed, 11 Mar 2009 23:33:18 +0900 Subject: x86: unify kmap_atomic_pfn() and iomap_atomic_prot_pfn() kmap_atomic_pfn() and iomap_atomic_prot_pfn() are almost same except pgprot. This patch removes the code duplication for these two functions. Signed-off-by: Akinobu Mita LKML-Reference: <20090311143317.GA22244@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/highmem.h | 1 + arch/x86/mm/highmem_32.c | 17 +++++++++++------ arch/x86/mm/iomap_32.c | 13 ++----------- 3 files changed, 14 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/highmem.h b/arch/x86/include/asm/highmem.h index bf9276bea66..014c2b85ae4 100644 --- a/arch/x86/include/asm/highmem.h +++ b/arch/x86/include/asm/highmem.h @@ -63,6 +63,7 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot); void *kmap_atomic(struct page *page, enum km_type type); void kunmap_atomic(void *kvaddr, enum km_type type); void *kmap_atomic_pfn(unsigned long pfn, enum km_type type); +void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot); struct page *kmap_atomic_to_page(void *ptr); #ifndef CONFIG_PARAVIRT diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index d11745334a6..ae4c8dae266 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -121,23 +121,28 @@ void kunmap_atomic(void *kvaddr, enum km_type type) pagefault_enable(); } -/* This is the same as kmap_atomic() but can map memory that doesn't - * have a struct page associated with it. - */ -void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) +void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot) { enum fixed_addresses idx; unsigned long vaddr; pagefault_disable(); - idx = type + KM_TYPE_NR*smp_processor_id(); + idx = type + KM_TYPE_NR * smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot)); + set_pte(kmap_pte - idx, pfn_pte(pfn, prot)); arch_flush_lazy_mmu_mode(); return (void*) vaddr; } + +/* This is the same as kmap_atomic() but can map memory that doesn't + * have a struct page associated with it. + */ +void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) +{ + return kmap_atomic_prot_pfn(pfn, type, kmap_prot); +} EXPORT_SYMBOL_GPL(kmap_atomic_pfn); /* temporarily in use by i915 GEM until vmap */ struct page *kmap_atomic_to_page(void *ptr) diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c index 04102d42ff4..592984e5496 100644 --- a/arch/x86/mm/iomap_32.c +++ b/arch/x86/mm/iomap_32.c @@ -18,6 +18,7 @@ #include #include +#include #include int is_io_mapping_possible(resource_size_t base, unsigned long size) @@ -36,11 +37,6 @@ EXPORT_SYMBOL_GPL(is_io_mapping_possible); void * iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot) { - enum fixed_addresses idx; - unsigned long vaddr; - - pagefault_disable(); - /* * For non-PAT systems, promote PAGE_KERNEL_WC to PAGE_KERNEL_UC_MINUS. * PAGE_KERNEL_WC maps to PWT, which translates to uncached if the @@ -50,12 +46,7 @@ iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot) if (!pat_enabled && pgprot_val(prot) == pgprot_val(PAGE_KERNEL_WC)) prot = PAGE_KERNEL_UC_MINUS; - idx = type + KM_TYPE_NR*smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - set_pte(kmap_pte-idx, pfn_pte(pfn, prot)); - arch_flush_lazy_mmu_mode(); - - return (void*) vaddr; + return kmap_atomic_prot_pfn(pfn, type, prot); } EXPORT_SYMBOL_GPL(iomap_atomic_prot_pfn); -- cgit From 12074fa1073013dd11f1cff41db018d5cff4ecd9 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Wed, 11 Mar 2009 23:34:50 +0900 Subject: x86: debug check for kmap_atomic_pfn and iomap_atomic_prot_pfn() It may be useful for kmap_atomic_pfn() and iomap_atomic_prot_pfn() to check invalid kmap usage as well as kmap_atomic. Signed-off-by: Akinobu Mita LKML-Reference: <20090311143449.GB22244@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/mm/highmem_32.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index ae4c8dae266..f256e73542d 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -128,6 +128,8 @@ void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot) pagefault_disable(); + debug_kmap_atomic_prot(type); + idx = type + KM_TYPE_NR * smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); set_pte(kmap_pte - idx, pfn_pte(pfn, prot)); -- cgit From 5e47c478b0b69bc9bc3ba544e4b1ca3268f98fef Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 11 Mar 2009 10:55:33 -0700 Subject: x86: remove zImage support Impact: obsolete feature removal The zImage kernel format has been functionally unused for a very long time. It is just barely possible to build a modern kernel that still fits within the zImage size limit, but it is highly unlikely that anyone ever uses it. Furthermore, although it is still supported by most bootloaders, it has been at best poorly tested (or not tested at all); some bootloaders are even known to not support zImage at all and not having even noticed. Also remove some really obsolete constants that no longer have any meaning. LKML-Reference: <49B703D4.1000008@zytor.com> Signed-off-by: H. Peter Anvin --- arch/x86/boot/Makefile | 23 ++++++++--------------- arch/x86/boot/header.S | 29 +++++++++-------------------- arch/x86/boot/pm.c | 44 -------------------------------------------- arch/x86/boot/tools/build.c | 9 +-------- arch/x86/include/asm/boot.h | 4 ---- 5 files changed, 18 insertions(+), 91 deletions(-) (limited to 'arch') diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index c70eff69a1f..57a29fecf6b 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -6,26 +6,23 @@ # for more details. # # Copyright (C) 1994 by Linus Torvalds +# Changed by many, many contributors over the years. # # ROOT_DEV specifies the default root-device when making the image. # This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case # the default of FLOPPY is used by 'build'. -ROOT_DEV := CURRENT +ROOT_DEV := CURRENT # If you want to preset the SVGA mode, uncomment the next line and # set SVGA_MODE to whatever number you want. # Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode. # The number is the same as you would ordinarily press at bootup. -SVGA_MODE := -DSVGA_MODE=NORMAL_VGA +SVGA_MODE := -DSVGA_MODE=NORMAL_VGA -# If you want the RAM disk device, define this to be the size in blocks. - -#RAMDISK := -DRAMDISK=512 - -targets := vmlinux.bin setup.bin setup.elf zImage bzImage +targets := vmlinux.bin setup.bin setup.elf bzImage subdir- := compressed setup-y += a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o @@ -71,17 +68,13 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ KBUILD_CFLAGS += $(call cc-option,-m32) KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ -$(obj)/zImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -$(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__ -$(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ -$(obj)/bzImage: BUILDFLAGS := -b +$(obj)/bzImage: asflags-y := $(SVGA_MODE) quiet_cmd_image = BUILD $@ -cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \ - $(obj)/vmlinux.bin $(ROOT_DEV) > $@ +cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \ + $(ROOT_DEV) > $@ -$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \ - $(obj)/vmlinux.bin $(obj)/tools/build FORCE +$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 7ccff4884a2..5d84d1c74e4 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -24,12 +24,8 @@ #include "boot.h" #include "offsets.h" -SETUPSECTS = 4 /* default nr of setup-sectors */ BOOTSEG = 0x07C0 /* original address of boot-sector */ -SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */ -SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */ - /* to be loaded */ -ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */ +SYSSEG = 0x1000 /* historical load address >> 4 */ #ifndef SVGA_MODE #define SVGA_MODE ASK_VGA @@ -97,12 +93,12 @@ bugger_off_msg: .section ".header", "a" .globl hdr hdr: -setup_sects: .byte SETUPSECTS +setup_sects: .byte 0 /* Filled in by build.c */ root_flags: .word ROOT_RDONLY -syssize: .long SYSSIZE -ram_size: .word RAMDISK +syssize: .long 0 /* Filled in by build.c */ +ram_size: .word 0 /* Obsolete */ vid_mode: .word SVGA_MODE -root_dev: .word ROOT_DEV +root_dev: .word 0 /* Filled in by build.c */ boot_flag: .word 0xAA55 # offset 512, entry point @@ -123,14 +119,15 @@ _start: # or else old loadlin-1.5 will fail) .globl realmode_swtch realmode_swtch: .word 0, 0 # default_switch, SETUPSEG -start_sys_seg: .word SYSSEG +start_sys_seg: .word SYSSEG # obsolete and meaningless, but just + # in case something decided to "use" it .word kernel_version-512 # pointing to kernel version string # above section of header is compatible # with loadlin-1.5 (header v1.5). Don't # change it. -type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin, - # Bootlin, SYSLX, bootsect...) +type_of_loader: .byte 0 # 0 means ancient bootloader, newer + # bootloaders know to change this. # See Documentation/i386/boot.txt for # assigned ids @@ -142,11 +139,7 @@ CAN_USE_HEAP = 0x80 # If set, the loader also has set # space behind setup.S can be used for # heap purposes. # Only the loader knows what is free -#ifndef __BIG_KERNEL__ - .byte 0 -#else .byte LOADED_HIGH -#endif setup_move_size: .word 0x8000 # size to move, when setup is not # loaded at 0x90000. We will move setup @@ -157,11 +150,7 @@ setup_move_size: .word 0x8000 # size to move, when setup is not code32_start: # here loaders can put a different # start address for 32-bit code. -#ifndef __BIG_KERNEL__ - .long 0x1000 # 0x1000 = default for zImage -#else .long 0x100000 # 0x100000 = default for big kernel -#endif ramdisk_image: .long 0 # address of loaded ramdisk image # Here the loader puts the 32-bit diff --git a/arch/x86/boot/pm.c b/arch/x86/boot/pm.c index 85a1cd8a8ff..8062f891525 100644 --- a/arch/x86/boot/pm.c +++ b/arch/x86/boot/pm.c @@ -32,47 +32,6 @@ static void realmode_switch_hook(void) } } -/* - * A zImage kernel is loaded at 0x10000 but wants to run at 0x1000. - * A bzImage kernel is loaded and runs at 0x100000. - */ -static void move_kernel_around(void) -{ - /* Note: rely on the compile-time option here rather than - the LOADED_HIGH flag. The Qemu kernel loader unconditionally - sets the loadflags to zero. */ -#ifndef __BIG_KERNEL__ - u16 dst_seg, src_seg; - u32 syssize; - - dst_seg = 0x1000 >> 4; - src_seg = 0x10000 >> 4; - syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraphs */ - - while (syssize) { - int paras = (syssize >= 0x1000) ? 0x1000 : syssize; - int dwords = paras << 2; - - asm volatile("pushw %%es ; " - "pushw %%ds ; " - "movw %1,%%es ; " - "movw %2,%%ds ; " - "xorw %%di,%%di ; " - "xorw %%si,%%si ; " - "rep;movsl ; " - "popw %%ds ; " - "popw %%es" - : "+c" (dwords) - : "r" (dst_seg), "r" (src_seg) - : "esi", "edi"); - - syssize -= paras; - dst_seg += paras; - src_seg += paras; - } -#endif -} - /* * Disable all interrupts at the legacy PIC. */ @@ -147,9 +106,6 @@ void go_to_protected_mode(void) /* Hook before leaving real mode, also disables interrupts */ realmode_switch_hook(); - /* Move the kernel/setup to their final resting places */ - move_kernel_around(); - /* Enable the A20 gate */ if (enable_a20()) { puts("A20 gate not responding, unable to boot...\n"); diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c index 44dc1923c0e..ee3a4ea923a 100644 --- a/arch/x86/boot/tools/build.c +++ b/arch/x86/boot/tools/build.c @@ -130,7 +130,7 @@ static void die(const char * str, ...) static void usage(void) { - die("Usage: build [-b] setup system [rootdev] [> image]"); + die("Usage: build setup system [rootdev] [> image]"); } int main(int argc, char ** argv) @@ -145,11 +145,6 @@ int main(int argc, char ** argv) void *kernel; u32 crc = 0xffffffffUL; - if (argc > 2 && !strcmp(argv[1], "-b")) - { - is_big_kernel = 1; - argc--, argv++; - } if ((argc < 3) || (argc > 4)) usage(); if (argc > 3) { @@ -216,8 +211,6 @@ int main(int argc, char ** argv) die("Unable to mmap '%s': %m", argv[2]); /* Number of 16-byte paragraphs, including space for a 4-byte CRC */ sys_size = (sz + 15 + 4) / 16; - if (!is_big_kernel && sys_size > DEF_SYSSIZE) - die("System is too big. Try using bzImage or modules."); /* Patch the setup code with the appropriate size parameters */ buf[0x1f1] = setup_sectors-1; diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h index 6526cf08b0e..6ba23dd9fc9 100644 --- a/arch/x86/include/asm/boot.h +++ b/arch/x86/include/asm/boot.h @@ -1,10 +1,6 @@ #ifndef _ASM_X86_BOOT_H #define _ASM_X86_BOOT_H -/* Don't touch these, unless you really know what you're doing. */ -#define DEF_SYSSEG 0x1000 -#define DEF_SYSSIZE 0x7F00 - /* Internal svga startup constants */ #define NORMAL_VGA 0xffff /* 80x25 mode */ #define EXTENDED_VGA 0xfffe /* 80x50 mode */ -- cgit From afcfe024aebd74b0984a41af9a34e009cf5badaf Mon Sep 17 00:00:00 2001 From: Stuart Bennett Date: Wed, 11 Mar 2009 20:29:45 +0000 Subject: x86: mmiotrace: quieten spurious warning message This message was being incorrectly emitted when using gdb, so compile it out by default for now; there will be a better fix in v2.6.30. Reported-by: Ingo Molnar Signed-off-by: Stuart Bennett Acked-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 6a518dd08a3..4f115e00486 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -310,7 +310,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); if (!ctx->active) { - pr_warning("kmmio: spurious debug trap on CPU %d.\n", + pr_debug("kmmio: spurious debug trap on CPU %d.\n", smp_processor_id()); goto out; } -- cgit From 9fa7266c2f0cdfcb09eacba2d3624bec7df78641 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 10:34:45 +0000 Subject: x86: remove leftover unwind annotations Impact: cleanup These got left in needlessly when ret_from_fork got simplified. Signed-off-by: Jan Beulich LKML-Reference: <49B8F355.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_64.S | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 7ba4621c0df..54866bb5d38 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -416,7 +416,6 @@ ENTRY(ret_from_fork) GET_THREAD_INFO(%rcx) - CFI_REMEMBER_STATE RESTORE_REST testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread? @@ -428,7 +427,6 @@ ENTRY(ret_from_fork) RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET jmp ret_from_sys_call # go to the SYSRET fastpath - CFI_RESTORE_STATE CFI_ENDPROC END(ret_from_fork) -- cgit From c2810188c1b810c68139608a207befae0a4f1e69 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 10:38:55 +0000 Subject: x86-64: move save_paranoid into .kprobes.text Impact: mark save_paranoid as non-kprobe-able code This appears to be necessary as the function gets called from kprobes-unsafe exception handling stubs (i.e. which themselves live in .kprobes.text). Signed-off-by: Jan Beulich LKML-Reference: <49B8F44F.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_64.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 54866bb5d38..a331ec38af9 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -368,6 +368,7 @@ ENTRY(save_rest) END(save_rest) /* save complete stack frame */ + .pushsection .kprobes.text, "ax" ENTRY(save_paranoid) XCPT_FRAME 1 RDI+8 cld @@ -396,6 +397,7 @@ ENTRY(save_paranoid) 1: ret CFI_ENDPROC END(save_paranoid) + .popsection /* * A newly forked process directly context switches into this address. -- cgit From dd1ef4ec4721ddc0a1f2b73a4f67930cb320665c Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 10:47:13 +0000 Subject: x86-64: remove unnecessary spill/reload of rbx from memcpy Impact: micro-optimization This should slightly improve its performance. Signed-off-by: Jan Beulich LKML-Reference: <49B8F641.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/lib/memcpy_64.S | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index c22981fa2f3..10c067694af 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -33,9 +33,6 @@ ENDPROC(memcpy_c) ENTRY(__memcpy) ENTRY(memcpy) CFI_STARTPROC - pushq %rbx - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rbx, 0 movq %rdi,%rax movl %edx,%ecx @@ -102,11 +99,7 @@ ENTRY(memcpy) jnz .Lloop_1 .Lende: - popq %rbx - CFI_ADJUST_CFA_OFFSET -8 - CFI_RESTORE rbx ret -.Lfinal: CFI_ENDPROC ENDPROC(memcpy) ENDPROC(__memcpy) -- cgit From f3b6eaf0149186ad0637512ec363582c91e06ee6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 12 Mar 2009 12:20:17 +0100 Subject: x86: memcpy, clean up Impact: cleanup Make this file more readable by bringing it more in line with the usual kernel style. Signed-off-by: Ingo Molnar --- arch/x86/lib/memcpy_64.S | 136 ++++++++++++++++++++++++++++------------------- 1 file changed, 81 insertions(+), 55 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index 10c067694af..ad5441ed1b5 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -1,30 +1,38 @@ /* Copyright 2002 Andi Kleen */ #include -#include + #include +#include /* * memcpy - Copy a memory block. * - * Input: - * rdi destination - * rsi source - * rdx count - * + * Input: + * rdi destination + * rsi source + * rdx count + * * Output: * rax original destination - */ + */ +/* + * memcpy_c() - fast string ops (REP MOVSQ) based variant. + * + * Calls to this get patched into the kernel image via the + * alternative instructions framework: + */ ALIGN memcpy_c: CFI_STARTPROC - movq %rdi,%rax - movl %edx,%ecx - shrl $3,%ecx - andl $7,%edx + movq %rdi, %rax + + movl %edx, %ecx + shrl $3, %ecx + andl $7, %edx rep movsq - movl %edx,%ecx + movl %edx, %ecx rep movsb ret CFI_ENDPROC @@ -33,92 +41,110 @@ ENDPROC(memcpy_c) ENTRY(__memcpy) ENTRY(memcpy) CFI_STARTPROC - movq %rdi,%rax - movl %edx,%ecx - shrl $6,%ecx + /* + * Put the number of full 64-byte blocks into %ecx. + * Tail portion is handled at the end: + */ + movq %rdi, %rax + movl %edx, %ecx + shrl $6, %ecx jz .Lhandle_tail .p2align 4 .Lloop_64: + /* + * We decrement the loop index here - and the zero-flag is + * checked at the end of the loop (instructions inbetween do + * not change the zero flag): + */ decl %ecx - movq (%rsi),%r11 - movq 8(%rsi),%r8 + /* + * Move in blocks of 4x16 bytes: + */ + movq 0*8(%rsi), %r11 + movq 1*8(%rsi), %r8 + movq %r11, 0*8(%rdi) + movq %r8, 1*8(%rdi) - movq %r11,(%rdi) - movq %r8,1*8(%rdi) + movq 2*8(%rsi), %r9 + movq 3*8(%rsi), %r10 + movq %r9, 2*8(%rdi) + movq %r10, 3*8(%rdi) - movq 2*8(%rsi),%r9 - movq 3*8(%rsi),%r10 + movq 4*8(%rsi), %r11 + movq 5*8(%rsi), %r8 + movq %r11, 4*8(%rdi) + movq %r8, 5*8(%rdi) - movq %r9,2*8(%rdi) - movq %r10,3*8(%rdi) + movq 6*8(%rsi), %r9 + movq 7*8(%rsi), %r10 + movq %r9, 6*8(%rdi) + movq %r10, 7*8(%rdi) - movq 4*8(%rsi),%r11 - movq 5*8(%rsi),%r8 + leaq 64(%rsi), %rsi + leaq 64(%rdi), %rdi - movq %r11,4*8(%rdi) - movq %r8,5*8(%rdi) - - movq 6*8(%rsi),%r9 - movq 7*8(%rsi),%r10 - - movq %r9,6*8(%rdi) - movq %r10,7*8(%rdi) - - leaq 64(%rsi),%rsi - leaq 64(%rdi),%rdi jnz .Lloop_64 .Lhandle_tail: - movl %edx,%ecx - andl $63,%ecx - shrl $3,%ecx + movl %edx, %ecx + andl $63, %ecx + shrl $3, %ecx jz .Lhandle_7 + .p2align 4 .Lloop_8: decl %ecx - movq (%rsi),%r8 - movq %r8,(%rdi) - leaq 8(%rdi),%rdi - leaq 8(%rsi),%rsi + movq (%rsi), %r8 + movq %r8, (%rdi) + leaq 8(%rdi), %rdi + leaq 8(%rsi), %rsi jnz .Lloop_8 .Lhandle_7: - movl %edx,%ecx - andl $7,%ecx - jz .Lende + movl %edx, %ecx + andl $7, %ecx + jz .Lend + .p2align 4 .Lloop_1: - movb (%rsi),%r8b - movb %r8b,(%rdi) + movb (%rsi), %r8b + movb %r8b, (%rdi) incq %rdi incq %rsi decl %ecx jnz .Lloop_1 -.Lende: +.Lend: ret CFI_ENDPROC ENDPROC(memcpy) ENDPROC(__memcpy) - /* Some CPUs run faster using the string copy instructions. - It is also a lot simpler. Use this when possible */ + /* + * Some CPUs run faster using the string copy instructions. + * It is also a lot simpler. Use this when possible: + */ - .section .altinstr_replacement,"ax" + .section .altinstr_replacement, "ax" 1: .byte 0xeb /* jmp */ .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */ 2: .previous - .section .altinstructions,"a" + + .section .altinstructions, "a" .align 8 .quad memcpy .quad 1b .byte X86_FEATURE_REP_GOOD - /* Replace only beginning, memcpy is used to apply alternatives, so it - * is silly to overwrite itself with nops - reboot is only outcome... */ + + /* + * Replace only beginning, memcpy is used to apply alternatives, + * so it is silly to overwrite itself with nops - reboot is the + * only outcome... + */ .byte 2b - 1b .byte 2b - 1b .previous -- cgit From 446c92b2901bedb3725d29b4e73def8aba623ffc Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 12 Mar 2009 18:03:16 +0100 Subject: [ARM] 5421/1: ftrace: fix crash due to tracing of __naked functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a fix for the following crash observed in 2.6.29-rc3: http://lkml.org/lkml/2009/1/29/150 On ARM it doesn't make sense to trace a naked function because then mcount is called without stack and frame pointer being set up and there is no chance to restore the lr register to the value before mcount was called. Reported-by: Matthias Kaehlcke Tested-by: Matthias Kaehlcke Cc: Abhishek Sagar Cc: Steven Rostedt Cc: Ingo Molnar Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/kernel/fiq.c | 4 ++-- arch/arm/mm/copypage-feroceon.c | 2 +- arch/arm/mm/copypage-v3.c | 2 +- arch/arm/mm/copypage-v4mc.c | 2 +- arch/arm/mm/copypage-v4wb.c | 2 +- arch/arm/mm/copypage-v4wt.c | 2 +- arch/arm/mm/copypage-xsc3.c | 2 +- arch/arm/mm/copypage-xscale.c | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 36f81d96797..6ff7919613d 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -88,7 +88,7 @@ void set_fiq_handler(void *start, unsigned int length) * disable irqs for the duration. Note - these functions are almost * entirely coded in assembly. */ -void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs) +void __naked set_fiq_regs(struct pt_regs *regs) { register unsigned long tmp; asm volatile ( @@ -106,7 +106,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs) : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); } -void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs) +void __naked get_fiq_regs(struct pt_regs *regs) { register unsigned long tmp; asm volatile ( diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c index c3ba6a94da0..70997d5bee2 100644 --- a/arch/arm/mm/copypage-feroceon.c +++ b/arch/arm/mm/copypage-feroceon.c @@ -13,7 +13,7 @@ #include #include -static void __attribute__((naked)) +static void __naked feroceon_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c index 70ed96c8af8..de9c06854ad 100644 --- a/arch/arm/mm/copypage-v3.c +++ b/arch/arm/mm/copypage-v3.c @@ -15,7 +15,7 @@ * * FIXME: do we need to handle cache stuff... */ -static void __attribute__((naked)) +static void __naked v3_copy_user_page(void *kto, const void *kfrom) { asm("\n\ diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 1601698b980..7370a7142b0 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(minicache_lock); * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __attribute__((naked)) +static void __naked mc_copy_user_page(void *from, void *to) { asm volatile( diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c index 3ec93dab765..9ab09841422 100644 --- a/arch/arm/mm/copypage-v4wb.c +++ b/arch/arm/mm/copypage-v4wb.c @@ -22,7 +22,7 @@ * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __attribute__((naked)) +static void __naked v4wb_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c index 0f1188efae4..300efafd664 100644 --- a/arch/arm/mm/copypage-v4wt.c +++ b/arch/arm/mm/copypage-v4wt.c @@ -20,7 +20,7 @@ * dirty data in the cache. However, we do have to ensure that * subsequent reads are up to date. */ -static void __attribute__((naked)) +static void __naked v4wt_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index 39a994542ca..bc4525f5ab2 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -29,7 +29,7 @@ * if we eventually end up using our copied page. * */ -static void __attribute__((naked)) +static void __naked xsc3_mc_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index d18f2397ee2..76824d3e966 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock); * Dcache aliasing issue. The writes will be forwarded to the write buffer, * and merged as appropriate. */ -static void __attribute__((naked)) +static void __naked mc_copy_user_page(void *from, void *to) { /* -- cgit From 305b07680f6c6a7e59f996c5bd85f009caff5bb1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 12 Mar 2009 18:03:01 +0000 Subject: [ARM] update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 136 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 133 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index fd23c0e9e69..b4211d8b2ac 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sun Nov 30 16:39:36 2008 +# Last update: Thu Mar 12 18:01:45 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1811,7 +1811,7 @@ pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820 jade MACH_JADE JADE 1821 ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822 gprisc3 MACH_GPRISC3 GPRISC3 1823 -stamp9260 MACH_STAMP9260 STAMP9260 1824 +stamp9g20 MACH_STAMP9G20 STAMP9G20 1824 smdk6430 MACH_SMDK6430 SMDK6430 1825 smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 @@ -1993,4 +1993,134 @@ spark MACH_SPARK SPARK 2002 benzina MACH_BENZINA BENZINA 2003 blaze MACH_BLAZE BLAZE 2004 linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005 -htcvenus MACH_HTCVENUS HTCVENUS 2006 +htckovsky MACH_HTCVENUS HTCVENUS 2006 +sony_prs505 MACH_SONY_PRS505 SONY_PRS505 2007 +hanlin_v3 MACH_HANLIN_V3 HANLIN_V3 2008 +sapphira MACH_SAPPHIRA SAPPHIRA 2009 +dack_sda_01 MACH_DACK_SDA_01 DACK_SDA_01 2010 +armbox MACH_ARMBOX ARMBOX 2011 +harris_rvp MACH_HARRIS_RVP HARRIS_RVP 2012 +ribaldo MACH_RIBALDO RIBALDO 2013 +agora MACH_AGORA AGORA 2014 +omap3_mini MACH_OMAP3_MINI OMAP3_MINI 2015 +a9sam6432_b MACH_A9SAM6432_B A9SAM6432_B 2016 +usg2410 MACH_USG2410 USG2410 2017 +pc72052_i10_revb MACH_PC72052_I10_REVB PC72052_I10_REVB 2018 +mx35_exm32 MACH_MX35_EXM32 MX35_EXM32 2019 +topas910 MACH_TOPAS910 TOPAS910 2020 +hyena MACH_HYENA HYENA 2021 +pospax MACH_POSPAX POSPAX 2022 +hdl_gx MACH_HDL_GX HDL_GX 2023 +ctera_4bay MACH_CTERA_4BAY CTERA_4BAY 2024 +ctera_plug_c MACH_CTERA_PLUG_C CTERA_PLUG_C 2025 +crwea_plug_i MACH_CRWEA_PLUG_I CRWEA_PLUG_I 2026 +egauge2 MACH_EGAUGE2 EGAUGE2 2027 +didj MACH_DIDJ DIDJ 2028 +m_s3c2443 MACH_MEISTER MEISTER 2029 +htcblackstone MACH_HTCBLACKSTONE HTCBLACKSTONE 2030 +cpuat9g20 MACH_CPUAT9G20 CPUAT9G20 2031 +smdk6440 MACH_SMDK6440 SMDK6440 2032 +omap_35xx_mvp MACH_OMAP_35XX_MVP OMAP_35XX_MVP 2033 +ctera_plug_i MACH_CTERA_PLUG_I CTERA_PLUG_I 2034 +pvg610_100 MACH_PVG610 PVG610 2035 +hprw6815 MACH_HPRW6815 HPRW6815 2036 +omap3_oswald MACH_OMAP3_OSWALD OMAP3_OSWALD 2037 +nas4220b MACH_NAS4220B NAS4220B 2038 +htcraphael_cdma MACH_HTCRAPHAEL_CDMA HTCRAPHAEL_CDMA 2039 +htcdiamond_cdma MACH_HTCDIAMOND_CDMA HTCDIAMOND_CDMA 2040 +scaler MACH_SCALER SCALER 2041 +zylonite2 MACH_ZYLONITE2 ZYLONITE2 2042 +aspenite MACH_ASPENITE ASPENITE 2043 +teton MACH_TETON TETON 2044 +ttc_dkb MACH_TTC_DKB TTC_DKB 2045 +bishop2 MACH_BISHOP2 BISHOP2 2046 +ippv5 MACH_IPPV5 IPPV5 2047 +farm926 MACH_FARM926 FARM926 2048 +mmccpu MACH_MMCCPU MMCCPU 2049 +sgmsfl MACH_SGMSFL SGMSFL 2050 +tt8000 MACH_TT8000 TT8000 2051 +zrn4300lp MACH_ZRN4300LP ZRN4300LP 2052 +mptc MACH_MPTC MPTC 2053 +h6051 MACH_H6051 H6051 2054 +pvg610_101 MACH_PVG610_101 PVG610_101 2055 +stamp9261_pc_evb MACH_STAMP9261_PC_EVB STAMP9261_PC_EVB 2056 +pelco_odysseus MACH_PELCO_ODYSSEUS PELCO_ODYSSEUS 2057 +tny_a9260 MACH_TNY_A9260 TNY_A9260 2058 +tny_a9g20 MACH_TNY_A9G20 TNY_A9G20 2059 +aesop_mp2530f MACH_AESOP_MP2530F AESOP_MP2530F 2060 +dx900 MACH_DX900 DX900 2061 +cpodc2 MACH_CPODC2 CPODC2 2062 +tilt_8925 MACH_TILT_8925 TILT_8925 2063 +davinci_dm357_evm MACH_DAVINCI_DM357_EVM DAVINCI_DM357_EVM 2064 +swordfish MACH_SWORDFISH SWORDFISH 2065 +corvus MACH_CORVUS CORVUS 2066 +taurus MACH_TAURUS TAURUS 2067 +axm MACH_AXM AXM 2068 +axc MACH_AXC AXC 2069 +baby MACH_BABY BABY 2070 +mp200 MACH_MP200 MP200 2071 +pcm043 MACH_PCM043 PCM043 2072 +hanlin_v3c MACH_HANLIN_V3C HANLIN_V3C 2073 +kbk9g20 MACH_KBK9G20 KBK9G20 2074 +adsturbog5 MACH_ADSTURBOG5 ADSTURBOG5 2075 +avenger_lite1 MACH_AVENGER_LITE1 AVENGER_LITE1 2076 +suc82x MACH_SUC SUC 2077 +at91sam7s256 MACH_AT91SAM7S256 AT91SAM7S256 2078 +mendoza MACH_MENDOZA MENDOZA 2079 +kira MACH_KIRA KIRA 2080 +mx1hbm MACH_MX1HBM MX1HBM 2081 +quatro43xx MACH_QUATRO43XX QUATRO43XX 2082 +quatro4230 MACH_QUATRO4230 QUATRO4230 2083 +nsb400 MACH_NSB400 NSB400 2084 +drp255 MACH_DRP255 DRP255 2085 +thoth MACH_THOTH THOTH 2086 +firestone MACH_FIRESTONE FIRESTONE 2087 +asusp750 MACH_ASUSP750 ASUSP750 2088 +ctera_dl MACH_CTERA_DL CTERA_DL 2089 +socr MACH_SOCR SOCR 2090 +htcoxygen MACH_HTCOXYGEN HTCOXYGEN 2091 +heroc MACH_HEROC HEROC 2092 +zeno6800 MACH_ZENO6800 ZENO6800 2093 +sc2mcs MACH_SC2MCS SC2MCS 2094 +gene100 MACH_GENE100 GENE100 2095 +as353x MACH_AS353X AS353X 2096 +sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097 +at91sam9g20 MACH_AT91SAM9G20 AT91SAM9G20 2098 +mv88f6192gtw_fe MACH_MV88F6192GTW_FE MV88F6192GTW_FE 2099 +cc9200 MACH_CC9200 CC9200 2100 +sm9200 MACH_SM9200 SM9200 2101 +tp9200 MACH_TP9200 TP9200 2102 +snapperdv MACH_SNAPPERDV SNAPPERDV 2103 +avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104 +avengers_lite1 MACH_AVENGERS_LITE1 AVENGERS_LITE1 2105 +omap3axon MACH_OMAP3AXON OMAP3AXON 2106 +ma8xx MACH_MA8XX MA8XX 2107 +mp201ek MACH_MP201EK MP201EK 2108 +davinci_tux MACH_DAVINCI_TUX DAVINCI_TUX 2109 +mpa1600 MACH_MPA1600 MPA1600 2110 +pelco_troy MACH_PELCO_TROY PELCO_TROY 2111 +nsb667 MACH_NSB667 NSB667 2112 +rovers5_4mpix MACH_ROVERS5_4MPIX ROVERS5_4MPIX 2113 +twocom MACH_TWOCOM TWOCOM 2114 +ubisys_p9_rcu3r2 MACH_UBISYS_P9_RCU3R2 UBISYS_P9_RCU3R2 2115 +hero_espresso MACH_HERO_ESPRESSO HERO_ESPRESSO 2116 +afeusb MACH_AFEUSB AFEUSB 2117 +t830 MACH_T830 T830 2118 +spd8020_cc MACH_SPD8020_CC SPD8020_CC 2119 +om_3d7k MACH_OM_3D7K OM_3D7K 2120 +picocom2 MACH_PICOCOM2 PICOCOM2 2121 +uwg4mx27 MACH_UWG4MX27 UWG4MX27 2122 +uwg4mx31 MACH_UWG4MX31 UWG4MX31 2123 +cherry MACH_CHERRY CHERRY 2124 +mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125 +s3c2440turkiye MACH_S3C2440TURKIYE S3C2440TURKIYE 2126 +tx37 MACH_TX37 TX37 2127 +sbc2800_9g20 MACH_SBC2800_9G20 SBC2800_9G20 2128 +benzglb MACH_BENZGLB BENZGLB 2129 +benztd MACH_BENZTD BENZTD 2130 +cartesio_plus MACH_CARTESIO_PLUS CARTESIO_PLUS 2131 +solrad_g20 MACH_SOLRAD_G20 SOLRAD_G20 2132 +mx27wallace MACH_MX27WALLACE MX27WALLACE 2133 +fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134 +rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 +smallogger MACH_SMALLOGGER SMALLOGGER 2136 -- cgit From 1522ac3ec95ff0230e7aa516f86b674fdf72866c Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 12 Mar 2009 17:03:48 +0000 Subject: [ARM] Fix virtual to physical translation macro corner cases The current use of these macros works well when the conversion is entirely linear. In this case, we can be assured that the following holds true: __va(p + s) - s = __va(p) However, this is not always the case, especially when there is a non-linear conversion (eg, when there is a 3.5GB hole in memory.) In this case, if 's' is the size of the region (eg, PAGE_SIZE) and 'p' is the final page, the above is most definitely not true. So, we must ensure that __va() and __pa() are only used with valid kernel direct mapped RAM addresses. This patch tweaks the code to achieve this. Tested-by: Charles Moschel Signed-off-by: Russell King --- arch/arm/mm/dma-mapping.c | 20 ++++++++++++-------- arch/arm/mm/init.c | 2 +- arch/arm/mm/mmap.c | 2 +- 3 files changed, 14 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 310e479309e..f1ef5613ccd 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -490,26 +490,30 @@ core_initcall(consistent_init); */ void dma_cache_maint(const void *start, size_t size, int direction) { - const void *end = start + size; + void (*inner_op)(const void *, const void *); + void (*outer_op)(unsigned long, unsigned long); - BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1)); + BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1)); switch (direction) { case DMA_FROM_DEVICE: /* invalidate only */ - dmac_inv_range(start, end); - outer_inv_range(__pa(start), __pa(end)); + inner_op = dmac_inv_range; + outer_op = outer_inv_range; break; case DMA_TO_DEVICE: /* writeback only */ - dmac_clean_range(start, end); - outer_clean_range(__pa(start), __pa(end)); + inner_op = dmac_clean_range; + outer_op = outer_clean_range; break; case DMA_BIDIRECTIONAL: /* writeback and invalidate */ - dmac_flush_range(start, end); - outer_flush_range(__pa(start), __pa(end)); + inner_op = dmac_flush_range; + outer_op = outer_flush_range; break; default: BUG(); } + + inner_op(start, start + size); + outer_op(__pa(start), __pa(start) + size); } EXPORT_SYMBOL(dma_cache_maint); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 34df4d9d03a..80fd3b69ae1 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -382,7 +382,7 @@ void __init bootmem_init(void) for_each_node(node) bootmem_free_node(node, mi); - high_memory = __va(memend_pfn << PAGE_SHIFT); + high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 5358fcc7f61..f7457fea6de 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size) { if (addr < PHYS_OFFSET) return 0; - if (addr + size > __pa(high_memory)) + if (addr + size >= __pa(high_memory - 1)) return 0; return 1; -- cgit From 8980a7baf93e478205e32ec7d6ef3bfb6c0bdfa7 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 6 Jan 2009 12:57:01 +0100 Subject: parisc: BUG_ON() cleanup - convert a few "if (xx) BUG();" to BUG_ON(xx) - remove a few printk()s, as we get a backtrace with BUG_ON() anyway Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/kernel/cache.c | 5 +---- arch/parisc/kernel/pci-dma.c | 22 ++++++---------------- arch/parisc/mm/init.c | 6 ++---- 3 files changed, 9 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 5259d8c2067..837530ea32e 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -551,10 +551,7 @@ void flush_cache_range(struct vm_area_struct *vma, { int sr3; - if (!vma->vm_mm->context) { - BUG(); - return; - } + BUG_ON(!vma->vm_mm->context); sr3 = mfsp(3); if (vma->vm_mm->context == sr3) { diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index df47895db82..7d927eac932 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -447,10 +447,7 @@ static void pa11_dma_free_consistent (struct device *dev, size_t size, void *vad static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) { - printk(KERN_ERR "pa11_dma_map_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0)); - BUG(); - } + BUG_ON(direction == DMA_NONE); flush_kernel_dcache_range((unsigned long) addr, size); return virt_to_phys(addr); @@ -458,10 +455,7 @@ static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t siz static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) { - printk(KERN_ERR "pa11_dma_unmap_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0)); - BUG(); - } + BUG_ON(direction == DMA_NONE); if (direction == DMA_TO_DEVICE) return; @@ -480,8 +474,7 @@ static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist, int n { int i; - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); for (i = 0; i < nents; i++, sglist++ ) { unsigned long vaddr = sg_virt_addr(sglist); @@ -496,8 +489,7 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in { int i; - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); if (direction == DMA_TO_DEVICE) return; @@ -511,16 +503,14 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size); } static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size); } diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 7c155c254e7..9d704d9831d 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -304,10 +304,8 @@ static void __init setup_bootmem(void) */ max_low_pfn = max_pfn; - if ((bootmap_pfn - bootmap_start_pfn) != bootmap_pages) { - printk(KERN_WARNING "WARNING! bootmap sizing is messed up!\n"); - BUG(); - } + /* bootmap sizing messed up? */ + BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages); /* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */ -- cgit From 24dc029f71c1411c5974a79848d68bb3e34263b9 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 13 Jan 2009 20:51:29 +0100 Subject: parisc: fix section mismatch warnings Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/kernel/firmware.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index 03f26bd75bd..f6d241238a7 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -151,7 +151,7 @@ static void convert_to_wide(unsigned long *addr) } #ifdef CONFIG_64BIT -void __init set_firmware_width_unlocked(void) +void __cpuinit set_firmware_width_unlocked(void) { int ret; @@ -168,7 +168,7 @@ void __init set_firmware_width_unlocked(void) * This function must be called before any pdc_* function that uses the * convert_to_wide function. */ -void __init set_firmware_width(void) +void __cpuinit set_firmware_width(void) { unsigned long flags; spin_lock_irqsave(&pdc_lock, flags); @@ -176,11 +176,11 @@ void __init set_firmware_width(void) spin_unlock_irqrestore(&pdc_lock, flags); } #else -void __init set_firmware_width_unlocked(void) { +void __cpuinit set_firmware_width_unlocked(void) { return; } -void __init set_firmware_width(void) { +void __cpuinit set_firmware_width(void) { return; } #endif /*CONFIG_64BIT*/ @@ -302,7 +302,7 @@ int pdc_chassis_warn(unsigned long *warn) return retval; } -int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info) +int __cpuinit pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info) { int ret; @@ -323,7 +323,7 @@ int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info) * This PDC call returns the presence and status of all the coprocessors * attached to the processor. */ -int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info) +int __cpuinit pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info) { int ret; unsigned long flags; -- cgit From e448372c79c49ef80df23496339ce0915abef76e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 13 Jan 2009 20:52:46 +0100 Subject: parisc: fix `struct pt_regs' declared inside parameter list warning Fix those compile warnings: uaccess.h:244: warning: `struct pt_regs' declared inside parameter list uaccess.h:244: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/uaccess.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h index 1c6dbb6f6e5..cd4c0b2a8e7 100644 --- a/arch/parisc/include/asm/uaccess.h +++ b/arch/parisc/include/asm/uaccess.h @@ -241,6 +241,7 @@ unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned lo #define __copy_to_user_inatomic __copy_to_user #define __copy_from_user_inatomic __copy_from_user +struct pt_regs; int fixup_exception(struct pt_regs *regs); #endif /* __PARISC_UACCESS_H */ -- cgit From ddd1f6c66dd964c106377f2be37b318794f112f4 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 13 Jan 2009 20:54:25 +0100 Subject: parisc: remove unused local out_putf label Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/hpux/fs.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c index bd9a4db3bd4..5cbe9f9e5d9 100644 --- a/arch/parisc/hpux/fs.c +++ b/arch/parisc/hpux/fs.c @@ -137,7 +137,6 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i error = count - buf.count; } -out_putf: fput(file); out: return error; -- cgit From 2cfeb9a6755d4d7be1026422b6aced48e3bad492 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 18 Jan 2009 18:13:53 +0100 Subject: parisc: add braces around arguments in assembler macros Add braces around the macro arguments, else for example "shl %r1, 5-3, %r2" would not expand to what you would assume. Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/assembly.h | 10 +++++----- arch/parisc/kernel/entry.S | 6 +++--- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index ffb208840ec..ab7cc373ee5 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -129,27 +129,27 @@ /* Shift Left - note the r and t can NOT be the same! */ .macro shl r, sa, t - dep,z \r, 31-\sa, 32-\sa, \t + dep,z \r, 31-(\sa), 32-(\sa), \t .endm /* The PA 2.0 shift left */ .macro shlw r, sa, t - depw,z \r, 31-\sa, 32-\sa, \t + depw,z \r, 31-(\sa), 32-(\sa), \t .endm /* And the PA 2.0W shift left */ .macro shld r, sa, t - depd,z \r, 63-\sa, 64-\sa, \t + depd,z \r, 63-(\sa), 64-(\sa), \t .endm /* Shift Right - note the r and t can NOT be the same! */ .macro shr r, sa, t - extru \r, 31-\sa, 32-\sa, \t + extru \r, 31-(\sa), 32-(\sa), \t .endm /* pa20w version of shift right */ .macro shrd r, sa, t - extrd,u \r, 63-\sa, 64-\sa, \t + extrd,u \r, 63-(\sa), 64-(\sa), \t .endm /* load 32-bit 'value' into 'reg' compensating for the ldil diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index d1fa4edd2d8..0db9fdcb770 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -368,7 +368,7 @@ * abstractions for the macros */ .macro EXTR reg1,start,length,reg2 #ifdef CONFIG_64BIT - extrd,u \reg1,32+\start,\length,\reg2 + extrd,u \reg1,32+(\start),\length,\reg2 #else extrw,u \reg1,\start,\length,\reg2 #endif @@ -376,7 +376,7 @@ .macro DEP reg1,start,length,reg2 #ifdef CONFIG_64BIT - depd \reg1,32+\start,\length,\reg2 + depd \reg1,32+(\start),\length,\reg2 #else depw \reg1,\start,\length,\reg2 #endif @@ -384,7 +384,7 @@ .macro DEPI val,start,length,reg #ifdef CONFIG_64BIT - depdi \val,32+\start,\length,\reg + depdi \val,32+(\start),\length,\reg #else depwi \val,\start,\length,\reg #endif -- cgit From c1da90fd099531e9449019dc53a5a02a5eaef2b4 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 26 Jan 2009 22:24:38 +0100 Subject: parisc: fix 64bit build Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/assembly.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index ab7cc373ee5..89fb40005e3 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -79,6 +79,7 @@ #include #include +#include #include -- cgit From 5a8247ca4c6441cafbb852cb1048d1056734a90c Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Tue, 13 Jan 2009 03:05:25 +0000 Subject: parisc: update parisc for new irq_desc Impact: cleanup, update to new cpumask API Irq_desc.affinity and irq_desc.pending_mask are now cpumask_var_t's so access to them should be using the new cpumask API. Signed-off-by: Mike Travis Signed-off-by: Kyle McMartin --- arch/parisc/kernel/irq.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index ac2c822928c..49482806863 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - irq_desc[irq].affinity = CPU_MASK_ALL; + cpumask_setall(irq_desc[irq].affinity); return -EINVAL; } @@ -136,7 +136,7 @@ static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) if (cpu_check_affinity(irq, dest)) return; - irq_desc[irq].affinity = *dest; + cpumask_copy(irq_desc[irq].affinity, dest); } #endif @@ -295,7 +295,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - irq_desc[irq].affinity = cpumask_of_cpu(cpu); + cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -352,7 +352,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - dest = irq_desc[irq].affinity; + cpumask_copy(&dest, irq_desc[irq].affinity); if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); -- cgit From 7c4be70e6d07582a111a1b66942c8a1d45528dfb Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 16 Feb 2009 02:53:03 -0500 Subject: parisc: fix use of new cpumask api in irq.c cpumask api needs to take a pointer to irq_desc[cpu].affinity Signed-off-by: Kyle McMartin --- arch/parisc/kernel/irq.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 49482806863..a572112f5ab 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - cpumask_setall(irq_desc[irq].affinity); + cpumask_setall(&irq_desc[irq].affinity); return -EINVAL; } @@ -136,7 +136,7 @@ static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) if (cpu_check_affinity(irq, dest)) return; - cpumask_copy(irq_desc[irq].affinity, dest); + cpumask_copy(&irq_desc[irq].affinity, dest); } #endif @@ -295,7 +295,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); + cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -352,7 +352,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - cpumask_copy(&dest, irq_desc[irq].affinity); + cpumask_copy(&dest, &irq_desc[irq].affinity); if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); -- cgit From 9dfe914da83ebc88f85d94b4d30d0e45882766d1 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 16 Feb 2009 03:05:02 -0500 Subject: parisc: convert (read|write)bwlq to inlines Kills the 'value computed but not used' due to leX_to_cpu. Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/io.h | 42 +++++++++++++++++++++++++++++++++--------- 1 file changed, 33 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h index d3031d1f9d0..1fa905ea53d 100644 --- a/arch/parisc/include/asm/io.h +++ b/arch/parisc/include/asm/io.h @@ -174,15 +174,39 @@ static inline void __raw_writeq(unsigned long long b, volatile void __iomem *add *(volatile unsigned long long __force *) addr = b; } -/* readb can never be const, so use __fswab instead of le*_to_cpu */ -#define readb(addr) __raw_readb(addr) -#define readw(addr) le16_to_cpu(__raw_readw(addr)) -#define readl(addr) le32_to_cpu(__raw_readl(addr)) -#define readq(addr) le64_to_cpu(__raw_readq(addr)) -#define writeb(b, addr) __raw_writeb(b, addr) -#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr) -#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr) -#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr) +static inline unsigned char readb(const volatile void __iomem *addr) +{ + return __raw_readb(addr); +} +static inline unsigned short readw(const volatile void __iomem *addr) +{ + return le16_to_cpu(__raw_readw(addr)); +} +static inline unsigned int readl(const volatile void __iomem *addr) +{ + return le32_to_cpu(__raw_readl(addr)); +} +static inline unsigned long long readq(const volatile void __iomem *addr) +{ + return le64_to_cpu(__raw_readq(addr)); +} + +static inline void writeb(unsigned char b, volatile void __iomem *addr) +{ + __raw_writeb(b, addr); +} +static inline void writew(unsigned short w, volatile void __iomem *addr) +{ + __raw_writew(cpu_to_le16(w), addr); +} +static inline void writel(unsigned int l, volatile void __iomem *addr) +{ + __raw_writel(cpu_to_le32(l), addr); +} +static inline void writeq(unsigned long long q, volatile void __iomem *addr) +{ + __raw_writeq(cpu_to_le64(q), addr); +} #define readb_relaxed(addr) readb(addr) #define readw_relaxed(addr) readw(addr) -- cgit From 8b6649c575e0d8312f62fe643ae43558892da2e1 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 16 Feb 2009 03:20:54 -0500 Subject: parisc: convert cpu_check_affinity to new cpumask api cpumask arg to the affinity function is now const, sort that out through the irq_desc implementations. Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/irq.h | 2 +- arch/parisc/kernel/irq.c | 12 +++++++----- 2 files changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/irq.h b/arch/parisc/include/asm/irq.h index 399c81981ed..dfa26b67f91 100644 --- a/arch/parisc/include/asm/irq.h +++ b/arch/parisc/include/asm/irq.h @@ -49,7 +49,7 @@ extern unsigned long txn_alloc_addr(unsigned int); extern unsigned long txn_affinity_addr(unsigned int irq, int cpu); extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *); -extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest); +extern int cpu_check_affinity(unsigned int irq, const struct cpumask *dest); /* soft power switch support (power.c) */ extern struct tasklet_struct power_tasklet; diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index a572112f5ab..29e70e16ede 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -112,7 +112,7 @@ void cpu_end_irq(unsigned int irq) } #ifdef CONFIG_SMP -int cpu_check_affinity(unsigned int irq, cpumask_t *dest) +int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) { int cpu_dest; @@ -126,17 +126,19 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest) /* whatever mask they set, we just allow one CPU */ cpu_dest = first_cpu(*dest); - *dest = cpumask_of_cpu(cpu_dest); - return 0; + return cpu_dest; } static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) { - if (cpu_check_affinity(irq, dest)) + int cpu_dest; + + cpu_dest = cpu_check_affinity(irq, dest); + if (cpu_dest < 0) return; - cpumask_copy(&irq_desc[irq].affinity, dest); + cpumask_copy(&irq_desc[irq].affinity, &cpumask_of_cpu(cpu_dest)); } #endif -- cgit From 0cb385e3ff54ee095d9873209f4da764dfb17fec Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 17 Feb 2009 12:42:52 -0500 Subject: parisc: define x->x mmio accessors Bloody inconsiderate driver writers... Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/io.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h index 1fa905ea53d..1f6d2ae7aba 100644 --- a/arch/parisc/include/asm/io.h +++ b/arch/parisc/include/asm/io.h @@ -208,6 +208,15 @@ static inline void writeq(unsigned long long q, volatile void __iomem *addr) __raw_writeq(cpu_to_le64(q), addr); } +#define readb readb +#define readw readw +#define readl readl +#define readq readq +#define writeb writeb +#define writew writew +#define writel writel +#define writeq writeq + #define readb_relaxed(addr) readb(addr) #define readw_relaxed(addr) readw(addr) #define readl_relaxed(addr) readl(addr) -- cgit From e8f208e8f727515bc605f241a5f854b41f77d0ed Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 13 Mar 2009 01:33:34 -0400 Subject: parisc: update defconfigs Signed-off-by: Kyle McMartin --- arch/parisc/configs/712_defconfig | 429 ++++++++++++++++--------- arch/parisc/configs/a500_defconfig | 490 +++++++++++++++++++--------- arch/parisc/configs/b180_defconfig | 433 +++++++++++++++++-------- arch/parisc/configs/c3000_defconfig | 575 ++++++++++++++++++++++----------- arch/parisc/configs/default_defconfig | 585 ++++++++++++++++++++++------------ 5 files changed, 1681 insertions(+), 831 deletions(-) (limited to 'arch') diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 9fc96e72716..bf34a28895f 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:00:07 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:55 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,17 +33,35 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -55,29 +73,38 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,6 +118,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set # # Processor type and features @@ -114,17 +142,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -138,10 +168,6 @@ CONFIG_GSC_LASI=y # CONFIG_EISA is not set # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -156,16 +182,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -173,6 +198,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -203,25 +229,25 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -230,6 +256,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -240,28 +267,26 @@ CONFIG_LLC2=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -276,6 +301,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -298,11 +325,19 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# # CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -342,14 +377,17 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y # CONFIG_SCSI_ZALON is not set CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -362,7 +400,6 @@ CONFIG_MD_RAID1=m # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -377,6 +414,9 @@ CONFIG_LASI_82596=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y @@ -387,6 +427,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -401,7 +446,6 @@ CONFIG_PPPOE=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -423,7 +467,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -446,8 +489,8 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -474,9 +517,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -501,72 +546,76 @@ CONFIG_PDC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m -# CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -579,6 +628,14 @@ CONFIG_FB_TILEBLITTING=y CONFIG_FB_STI=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -606,15 +663,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -630,10 +680,7 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -641,63 +688,82 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set - -# -# GSC devices -# +CONFIG_SND_GSC=y CONFIG_SND_HARMONY=y - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices -# -# CONFIG_AUXDISPLAY is not set +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -707,7 +773,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set @@ -717,19 +783,18 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -759,16 +824,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -778,35 +840,34 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -815,6 +876,7 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set @@ -827,10 +889,6 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -871,33 +929,28 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -909,10 +962,32 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_RODATA=y # @@ -921,57 +996,113 @@ CONFIG_DEBUG_RODATA=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index ddacc72e38f..f12e4b8349d 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:12:44 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:56 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -34,18 +34,30 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CPUSETS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -57,28 +69,40 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -93,6 +117,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # Processor type and features @@ -118,12 +143,12 @@ CONFIG_NODES_SHIFT=3 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y @@ -131,11 +156,12 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_COMPAT=y CONFIG_NR_CPUS=8 @@ -145,14 +171,13 @@ CONFIG_NR_CPUS=8 # CONFIG_GSC is not set CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m @@ -187,16 +212,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -204,6 +228,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -234,7 +260,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -250,66 +275,72 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=m @@ -318,33 +349,30 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m -# CONFIG_IP6_NF_MATCH_OWNER is not set CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set -# CONFIG_IP6_NF_MATCH_EUI64 is not set -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set # CONFIG_IP_DCCP_CCID3 is not set @@ -356,6 +384,7 @@ CONFIG_IP_DCCP_CCID2=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -366,28 +395,26 @@ CONFIG_LLC2=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -402,6 +429,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -421,14 +450,23 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -468,8 +506,10 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -478,16 +518,21 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -503,9 +548,11 @@ CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -514,10 +561,6 @@ CONFIG_MD_RAID1=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m @@ -529,20 +572,40 @@ CONFIG_FUSION_CTL=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set @@ -567,33 +630,38 @@ CONFIG_HP100=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m -# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=m -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -601,23 +669,31 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -625,6 +701,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m @@ -650,7 +731,6 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -669,7 +749,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -693,10 +772,13 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -721,17 +803,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=y -CONFIG_AGP_PARISC=y -# CONFIG_DRM is not set # # PCMCIA character devices @@ -739,51 +816,66 @@ CONFIG_AGP_PARISC=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +CONFIG_AGP=y +CONFIG_AGP_PARISC=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -792,50 +884,83 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 # CONFIG_STI_CONSOLE is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices -# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -845,7 +970,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set @@ -855,19 +980,19 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -897,16 +1022,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -916,34 +1038,33 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -952,6 +1073,7 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set @@ -964,10 +1086,6 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1008,33 +1126,28 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1046,10 +1159,33 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # @@ -1058,56 +1194,112 @@ CONFIG_FORCED_INLINING=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 1bf22c9a461..98bb05ee6e8 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:16:46 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:57 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,13 +33,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -51,27 +67,34 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -85,6 +108,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # Processor type and features @@ -108,13 +132,15 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -130,14 +156,14 @@ CONFIG_EISA_NAMES=y CONFIG_ISA=y CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_GSC_DINO=y # CONFIG_PCI_LBA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # PA-RISC specific drivers @@ -151,16 +177,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -205,36 +230,37 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -247,7 +273,9 @@ CONFIG_IPV6_SIT=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -275,10 +303,18 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=y +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -317,8 +353,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -330,12 +368,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -346,6 +387,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y @@ -360,7 +402,6 @@ CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=40 # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set @@ -373,9 +414,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=40 # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -383,26 +426,18 @@ CONFIG_MD_RAID1=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -434,36 +469,49 @@ CONFIG_TULIP=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -471,6 +519,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PLIP is not set @@ -503,7 +556,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -526,11 +578,12 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set @@ -564,9 +617,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -598,75 +653,79 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -691,6 +750,7 @@ CONFIG_FB_STI=y # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -698,7 +758,16 @@ CONFIG_FB_STI=y # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -718,15 +787,8 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -742,10 +804,7 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -753,10 +812,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -765,9 +821,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -792,6 +850,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -809,30 +868,23 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# GSC devices -# +CONFIG_SND_GSC=y CONFIG_SND_HARMONY=y - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -840,36 +892,63 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices -# -# CONFIG_AUXDISPLAY is not set +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -879,19 +958,18 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -917,35 +995,32 @@ CONFIG_JOLIET=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y @@ -962,10 +1037,6 @@ CONFIG_SMB_FS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1011,7 +1082,9 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1019,9 +1092,12 @@ CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1033,10 +1109,29 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # @@ -1044,52 +1139,108 @@ CONFIG_FORCED_INLINING=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_PCBC is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index c6def3c1d20..0aa8014f758 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:24:00 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:58 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,16 +33,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -54,29 +67,39 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -90,6 +113,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set # # Processor type and features @@ -115,17 +139,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -134,14 +160,13 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_GSC is not set CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -158,16 +183,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -175,6 +199,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -204,7 +230,6 @@ CONFIG_INET_XFRM_MODE_BEET=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -220,29 +245,34 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set @@ -251,6 +281,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -260,28 +291,26 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -296,6 +325,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -316,59 +347,62 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y @@ -380,10 +414,7 @@ CONFIG_BLK_DEV_SIIMAGE=m # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -422,8 +453,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -433,16 +466,20 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -458,9 +495,11 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_NSP32 is not set CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -475,13 +514,8 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -# CONFIG_DM_MULTIPATH_EMC is not set -# CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m # CONFIG_FUSION_FC is not set @@ -493,20 +527,40 @@ CONFIG_FUSION_CTL=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set @@ -528,33 +582,38 @@ CONFIG_TULIP_MMIO=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -562,23 +621,31 @@ CONFIG_E1000=m # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -586,6 +653,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -594,7 +666,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -612,7 +683,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -634,7 +704,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -652,6 +721,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -672,10 +742,13 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -699,72 +772,77 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -790,6 +868,7 @@ CONFIG_FB_STI=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -798,7 +877,16 @@ CONFIG_FB_STI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -818,15 +906,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -842,20 +923,16 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y CONFIG_SND_AD1889=y # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -864,10 +941,12 @@ CONFIG_SND_AD1889=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -892,6 +971,7 @@ CONFIG_SND_AD1889=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -909,47 +989,59 @@ CONFIG_SND_AD1889=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -958,12 +1050,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -971,32 +1071,37 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1004,15 +1109,10 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -# CONFIG_USB_MON is not set # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1021,7 +1121,7 @@ CONFIG_USB_MICROTEK=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m # CONFIG_USB_LCD is not set @@ -1037,37 +1137,59 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB DSL modem support -# - -# -# USB Gadget Support +# OTG and related infrastructure # -# CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1077,25 +1199,24 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1124,16 +1245,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1142,32 +1260,31 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1181,10 +1298,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1225,33 +1338,28 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1263,10 +1371,33 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_RODATA=y # @@ -1274,54 +1405,110 @@ CONFIG_DEBUG_RODATA=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig index 448a757b06c..283a96c1b5e 100644 --- a/arch/parisc/configs/default_defconfig +++ b/arch/parisc/configs/default_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 20:54:57 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:59 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,17 +33,35 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -55,29 +73,39 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,6 +119,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set # # Processor type and features @@ -114,17 +143,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -140,15 +171,14 @@ CONFIG_EISA_NAMES=y # CONFIG_ISA is not set CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_GSC_DINO=y CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -183,16 +213,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -200,6 +229,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -245,8 +276,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -254,6 +287,7 @@ CONFIG_IPV6_SIT=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -264,28 +298,26 @@ CONFIG_LLC2=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -300,6 +332,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -330,63 +364,68 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECS=y # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y @@ -398,10 +437,7 @@ CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -440,8 +476,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -452,11 +490,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -464,6 +505,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y # CONFIG_SCSI_STEX is not set @@ -487,9 +529,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -505,32 +549,47 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_LASI_82596=y @@ -550,13 +609,15 @@ CONFIG_TULIP=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_PCMCIA_XIRCOM is not set -# CONFIG_PCMCIA_XIRTULIP is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -564,7 +625,7 @@ CONFIG_NET_PCI=y # CONFIG_AC3200 is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set +# CONFIG_CS89x0 is not set # CONFIG_E100 is not set # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set @@ -574,19 +635,24 @@ CONFIG_NET_PCI=y # CONFIG_ES3210 is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -594,23 +660,31 @@ CONFIG_ACENIC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -618,6 +692,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -626,7 +705,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set @@ -654,7 +732,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -676,7 +753,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -699,11 +775,12 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_MOUSE_HIL=y # CONFIG_INPUT_JOYSTICK is not set @@ -729,10 +806,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -759,21 +839,16 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m -# CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -781,60 +856,70 @@ CONFIG_GEN_RTC_X=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -860,6 +945,7 @@ CONFIG_FB_STI=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -868,7 +954,16 @@ CONFIG_FB_STI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -896,15 +991,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -920,11 +1008,9 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -932,10 +1018,8 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y CONFIG_SND_AD1889=y # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -944,10 +1028,12 @@ CONFIG_SND_AD1889=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -972,6 +1058,7 @@ CONFIG_SND_AD1889=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -989,58 +1076,67 @@ CONFIG_SND_AD1889=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# GSC devices -# +CONFIG_SND_GSC=y CONFIG_SND_HARMONY=y - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1049,12 +1145,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1062,19 +1164,23 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1084,16 +1190,11 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1102,7 +1203,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1118,38 +1219,60 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB DSL modem support -# - -# -# USB Gadget Support +# OTG and related infrastructure # -# CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # -# CONFIG_AUXDISPLAY is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1159,21 +1282,20 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1202,16 +1324,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -1221,33 +1340,32 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -1256,6 +1374,7 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set @@ -1268,10 +1387,6 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1312,33 +1427,28 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1350,10 +1460,33 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # @@ -1362,56 +1495,112 @@ CONFIG_FORCED_INLINING=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -- cgit From f58ba100678f421bdcb000a3c71793f432dfab93 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 13 Mar 2009 15:42:12 +0100 Subject: tracing/syscalls: support for syscalls tracing on x86 Extend x86 architecture syscall tracing support with syscall metadata table details. (The upcoming core syscall tracing modifications rely on this.) Signed-off-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <1236955332-10133-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/ftrace.h | 7 +++++ arch/x86/kernel/ftrace.c | 63 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h index db24c2278be..bd2c6511c88 100644 --- a/arch/x86/include/asm/ftrace.h +++ b/arch/x86/include/asm/ftrace.h @@ -28,6 +28,13 @@ #endif +/* FIXME: I don't want to stay hardcoded */ +#ifdef CONFIG_X86_64 +# define FTRACE_SYSCALL_MAX 296 +#else +# define FTRACE_SYSCALL_MAX 333 +#endif + #ifdef CONFIG_FUNCTION_TRACER #define MCOUNT_ADDR ((long)(mcount)) #define MCOUNT_INSN_SIZE 5 /* sizeof mcount call */ diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index a85da1764b1..1d0d7f42efe 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -453,3 +453,66 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) } } #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + +#ifdef CONFIG_FTRACE_SYSCALLS + +extern unsigned long __start_syscalls_metadata[]; +extern unsigned long __stop_syscalls_metadata[]; +extern unsigned long *sys_call_table; + +static struct syscall_metadata **syscalls_metadata; + +static struct syscall_metadata *find_syscall_meta(unsigned long *syscall) +{ + struct syscall_metadata *start; + struct syscall_metadata *stop; + char str[KSYM_SYMBOL_LEN]; + + + start = (struct syscall_metadata *)__start_syscalls_metadata; + stop = (struct syscall_metadata *)__stop_syscalls_metadata; + kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str); + + for ( ; start < stop; start++) { + if (start->name && !strcmp(start->name, str)) + return start; + } + return NULL; +} + +struct syscall_metadata *syscall_nr_to_meta(int nr) +{ + if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0) + return NULL; + + return syscalls_metadata[nr]; +} + +void arch_init_ftrace_syscalls(void) +{ + int i; + struct syscall_metadata *meta; + unsigned long **psys_syscall_table = &sys_call_table; + static atomic_t refs; + + if (atomic_inc_return(&refs) != 1) + goto end; + + syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * + FTRACE_SYSCALL_MAX, GFP_KERNEL); + if (!syscalls_metadata) { + WARN_ON(1); + return; + } + + for (i = 0; i < FTRACE_SYSCALL_MAX; i++) { + meta = find_syscall_meta(psys_syscall_table[i]); + syscalls_metadata[i] = meta; + } + return; + + /* Paranoid: avoid overflow */ +end: + atomic_dec(&refs); +} +#endif -- cgit From ccd50dfd92ea2c4ba9e39531ac55db53393e783e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 13 Mar 2009 17:02:17 +0100 Subject: tracing/syscalls: support for syscalls tracing on x86, fix Impact: build fix kernel/built-in.o: In function `ftrace_syscall_exit': (.text+0x76667): undefined reference to `syscall_nr_to_meta' ftrace.o is built: obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o But now a CONFIG_FTRACE_SYSCALLS dependency is needed too. Cc: Frederic Weisbecker Cc: Steven Rostedt Cc: Lai Jiangshan LKML-Reference: <1236401580-5758-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 339ce35648e..84000eb931f 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -66,7 +66,8 @@ obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-y += apic/ obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o -obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o +obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o +obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o -- cgit From 3b289d6e35a1a535c19a5b079f0500526754e650 Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Thu, 12 Mar 2009 18:00:50 +0800 Subject: MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled Signed-off-by: Zhang Le Signed-off-by: Ralf Baechle --- arch/mips/include/asm/seccomp.h | 4 ---- arch/mips/include/asm/thread_info.h | 6 ++++++ 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h index a6772e9507f..ae6306ebdca 100644 --- a/arch/mips/include/asm/seccomp.h +++ b/arch/mips/include/asm/seccomp.h @@ -15,8 +15,6 @@ */ #ifdef CONFIG_MIPS32_O32 -#define TIF_32BIT TIF_32BIT_REGS - #define __NR_seccomp_read_32 4003 #define __NR_seccomp_write_32 4004 #define __NR_seccomp_exit_32 4001 @@ -24,8 +22,6 @@ #elif defined(CONFIG_MIPS32_N32) -#define TIF_32BIT _TIF_32BIT_ADDR - #define __NR_seccomp_read_32 6000 #define __NR_seccomp_write_32 6001 #define __NR_seccomp_exit_32 6058 diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 3f76de73c94..676aa2ae191 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -127,6 +127,12 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_LOAD_WATCH 25 /* If set, load watch registers */ #define TIF_SYSCALL_TRACE 31 /* syscall trace active */ +#ifdef CONFIG_MIPS32_O32 +#define TIF_32BIT TIF_32BIT_REGS +#elif defined(CONFIG_MIPS32_N32) +#define TIF_32BIT _TIF_32BIT_ADDR +#endif /* CONFIG_MIPS32_O32 */ + #define _TIF_SYSCALL_TRACE (1< Date: Fri, 13 Mar 2009 21:17:57 +0100 Subject: MIPS: Mark Eins: Fix configuration. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 26 +- arch/mips/Makefile | 2 +- arch/mips/configs/emma2rh_defconfig | 1439 ---------------------------------- arch/mips/configs/markeins_defconfig | 1439 ++++++++++++++++++++++++++++++++++ arch/mips/emma/Kconfig | 29 - arch/mips/emma/markeins/platform.c | 39 +- 6 files changed, 1488 insertions(+), 1486 deletions(-) delete mode 100644 arch/mips/configs/emma2rh_defconfig create mode 100644 arch/mips/configs/markeins_defconfig delete mode 100644 arch/mips/emma/Kconfig (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e61465a18c7..206cb7953b0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -238,8 +238,12 @@ config MIPS_SIM This option enables support for MIPS Technologies MIPSsim software emulator. -config MACH_EMMA - bool "NEC EMMA series based machines" +config NEC_MARKEINS + bool "NEC EMMA2RH Mark-eins board" + select SOC_EMMA2RH + select HW_HAS_PCI + help + This enables support for the NEC Electronics Mark-eins boards. config MACH_VR41XX bool "NEC VR4100 series based machines" @@ -637,7 +641,6 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" -source "arch/mips/emma/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" @@ -895,6 +898,18 @@ config MIPS_RM9122 bool select SERIAL_RM9000 +config SOC_EMMA2RH + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select SWAP_IO_SPACE + select SYS_HAS_CPU_R5500 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + config SOC_PNX833X bool select CEVT_R4K @@ -930,11 +945,6 @@ config SOC_PNX8550 config SWAP_IO_SPACE bool -config EMMA2RH - bool - depends on MARKEINS - default y - config SERIAL_RM9000 bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 21b00e95dae..22dab2e1434 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -416,7 +416,7 @@ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 # # Common NEC EMMAXXX # -core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/ +core-$(CONFIG_SOC_EMMA2RH) += arch/mips/emma/common/ cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh # diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig deleted file mode 100644 index fea9bc9865a..00000000000 --- a/arch/mips/configs/emma2rh_defconfig +++ /dev/null @@ -1,1439 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:29 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -CONFIG_MARKEINS=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_EMMA2RH=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -CONFIG_CPU_R5000=y -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R5000=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -CONFIG_IPV6_MIP6=y -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -# CONFIG_IPV6_TUNNEL is not set -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_NF_NAT_SIP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_NF_CONNTRACK_IPV6=m -# CONFIG_IP6_NF_QUEUE is not set -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_RAW=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set -CONFIG_FIB_RULES=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x1e000000 -CONFIG_MTD_PHYSMAP_LEN=0x02000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -CONFIG_NATSEMI=y -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -CONFIG_RTC=m -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PASEMI is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -CONFIG_I2C_DEBUG_CORE=y -# CONFIG_I2C_DEBUG_ALGO is not set -CONFIG_I2C_DEBUG_BUS=y -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig new file mode 100644 index 00000000000..bad8901f8f3 --- /dev/null +++ b/arch/mips/configs/markeins_defconfig @@ -0,0 +1,1439 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Tue Feb 20 21:47:29 2007 +# +CONFIG_MIPS=y + +# +# Machine selection +# +CONFIG_ZONE_DMA=y +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_WR_PPMC is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_YOSEMITE is not set +CONFIG_NEC_MARKEINS=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_SOC_EMMA2RH=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +CONFIG_CPU_R5000=y +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_R5000=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_VPE_LOADER is not set +# CONFIG_64BIT_PHYS_ADDR is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +CONFIG_HZ_1000=y +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=1000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y +# CONFIG_KEXEC is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +CONFIG_IPV6_MIP6=y +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_TUNNEL is not set +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_NF_CONNTRACK_IPV6=m +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set +CONFIG_FIB_RULES=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=y +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_RTC=m +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_I2C_DEBUG_CORE=y +# CONFIG_I2C_DEBUG_ALGO is not set +CONFIG_I2C_DEBUG_BUS=y +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +# CONFIG_HID is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/emma/Kconfig b/arch/mips/emma/Kconfig deleted file mode 100644 index 9669c72123c..00000000000 --- a/arch/mips/emma/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -choice - prompt "Machine type" - depends on MACH_EMMA - default NEC_MARKEINS - -config NEC_MARKEINS - bool "NEC EMMA2RH Mark-eins board" - select SOC_EMMA2RH - select HW_HAS_PCI - help - This enables support for the NEC Electronics Mark-eins boards. - -endchoice - -config SOC_EMMA2RH - bool - select SOC_EMMA - select SYS_HAS_CPU_R5500 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - -config SOC_EMMA - bool - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select SWAP_IO_SPACE - select SYS_SUPPORTS_BIG_ENDIAN diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c index 88e87f6b344..d5f47e4f0d1 100644 --- a/arch/mips/emma/markeins/platform.c +++ b/arch/mips/emma/markeins/platform.c @@ -141,13 +141,6 @@ static struct platform_device serial_emma = { }, }; -static struct platform_device *devices[] = { - &i2c_emma_devices[0], - &i2c_emma_devices[1], - &i2c_emma_devices[2], - &serial_emma, -}; - static struct mtd_partition markeins_parts[] = { [0] = { .name = "RootFS", @@ -181,11 +174,39 @@ static struct mtd_partition markeins_parts[] = { }, }; +static struct physmap_flash_data markeins_flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(markeins_parts), + .parts = markeins_parts +}; + +static struct resource markeins_flash_resource = { + .start = 0x1e000000, + .end = 0x02000000, + .flags = IORESOURCE_MEM +}; + +static struct platform_device markeins_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &markeins_flash_data, + }, + .num_resources = 1, + .resource = &markeins_flash_resource, +}; + +static struct platform_device *devices[] = { + i2c_emma_devices, + i2c_emma_devices + 1, + i2c_emma_devices + 2, + &serial_emma, + &markeins_flash_device, +}; + static int __init platform_devices_setup(void) { - physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts)); return platform_add_devices(devices, ARRAY_SIZE(devices)); } arch_initcall(platform_devices_setup); - -- cgit From 88200bc28da38bcda1cb1bd218216e83b426d8a8 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sat, 14 Mar 2009 12:08:13 +0530 Subject: x86: entry_32.S fix compile warnings - fix work mask bit width Fix: arch/x86/kernel/entry_32.S:446: Warning: 00000000080001d1 shortened to 00000000000001d1 arch/x86/kernel/entry_32.S:457: Warning: 000000000800feff shortened to 000000000000feff arch/x86/kernel/entry_32.S:527: Warning: 00000000080001d1 shortened to 00000000000001d1 arch/x86/kernel/entry_32.S:541: Warning: 000000000800feff shortened to 000000000000feff arch/x86/kernel/entry_32.S:676: Warning: 0000000008000091 shortened to 0000000000000091 TIF_SYSCALL_FTRACE is 0x08000000 and until now we checked the first 16 bits of the work mask - bit 27 falls outside of that. Update the entry_32.S code to check the full 32-bit mask. [ %cx => %ecx fix from Cyrill Gorcunov ] Signed-off-by: Jaswinder Singh Rajput Cc: Frederic Weisbecker Cc: Steven Rostedt Cc: "H. Peter Anvin" LKML-Reference: <1237012693.18733.3.camel@ht.satnam> Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_32.S | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 899e8938e79..c929add475c 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -442,8 +442,7 @@ sysenter_past_esp: GET_THREAD_INFO(%ebp) - /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) jnz sysenter_audit sysenter_do_call: cmpl $(nr_syscalls), %eax @@ -454,7 +453,7 @@ sysenter_do_call: DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx - testw $_TIF_ALLWORK_MASK, %cx + testl $_TIF_ALLWORK_MASK, %ecx jne sysexit_audit sysenter_exit: /* if something modifies registers it must also disable sysexit */ @@ -468,7 +467,7 @@ sysenter_exit: #ifdef CONFIG_AUDITSYSCALL sysenter_audit: - testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp) jnz syscall_trace_entry addl $4,%esp CFI_ADJUST_CFA_OFFSET -4 @@ -485,7 +484,7 @@ sysenter_audit: jmp sysenter_do_call sysexit_audit: - testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx jne syscall_exit_work TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_ANY) @@ -498,7 +497,7 @@ sysexit_audit: DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx - testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx jne syscall_exit_work movl PT_EAX(%esp),%eax /* reload syscall return value */ jmp sysenter_exit @@ -523,8 +522,7 @@ ENTRY(system_call) SAVE_ALL GET_THREAD_INFO(%ebp) # system call tracing in operation / emulation - /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) jnz syscall_trace_entry cmpl $(nr_syscalls), %eax jae syscall_badsys @@ -538,7 +536,7 @@ syscall_exit: # between sampling and the iret TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx - testw $_TIF_ALLWORK_MASK, %cx # current->work + testl $_TIF_ALLWORK_MASK, %ecx # current->work jne syscall_exit_work restore_all: @@ -673,7 +671,7 @@ END(syscall_trace_entry) # perform syscall exit tracing ALIGN syscall_exit_work: - testb $_TIF_WORK_SYSCALL_EXIT, %cl + testl $_TIF_WORK_SYSCALL_EXIT, %ecx jz work_pending TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call -- cgit