From 438ff3f3cc33833206a48492e9d6674e4e82bed8 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Mon, 29 Oct 2007 15:28:07 +0100
Subject: [AVR32] Add support for AT32AP7001 and AT32AP7002

These are derivatives of the AT32AP7000 chip, which means that most of
the code stays the same. Rename a few files, functions, definitions
and config symbols to reflect that they apply to all AP700x chips, and
exclude some platform devices from chips where they aren't present.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 arch/avr32/Kconfig                     |   21 +-
 arch/avr32/Makefile                    |    2 +-
 arch/avr32/boards/atngw100/setup.c     |    2 +-
 arch/avr32/configs/atngw100_defconfig  |    9 +-
 arch/avr32/configs/atstk1002_defconfig |    8 +-
 arch/avr32/mach-at32ap/Kconfig         |   12 +-
 arch/avr32/mach-at32ap/Makefile        |    4 +-
 arch/avr32/mach-at32ap/at32ap7000.c    | 1730 -------------------------------
 arch/avr32/mach-at32ap/at32ap700x.c    | 1742 ++++++++++++++++++++++++++++++++
 9 files changed, 1780 insertions(+), 1750 deletions(-)
 delete mode 100644 arch/avr32/mach-at32ap/at32ap7000.c
 create mode 100644 arch/avr32/mach-at32ap/at32ap700x.c

(limited to 'arch')

diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 767a19cfa42..e37e6b92658 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -84,13 +84,26 @@ config PLATFORM_AT32AP
 	select MMU
 	select PERFORMANCE_COUNTERS
 
+config CPU_AT32AP700X
+	bool
+	select PLATFORM_AT32AP
+
 choice
 	prompt "AVR32 CPU type"
 	default CPU_AT32AP7000
 
 config CPU_AT32AP7000
 	bool "AT32AP7000"
-	select PLATFORM_AT32AP
+	select CPU_AT32AP700X
+
+config CPU_AT32AP7001
+	bool "AT32AP7001"
+	select CPU_AT32AP700X
+
+config CPU_AT32AP7002
+	bool "AT32AP7002"
+	select CPU_AT32AP700X
+
 endchoice
 
 #
@@ -126,15 +139,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
 
 config LOAD_ADDRESS
 	hex
-	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
 
 config ENTRY_ADDRESS
 	hex
-	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
 
 config PHYS_OFFSET
 	hex
-	default 0x10000000 if CPU_AT32AP7000=y
+	default 0x10000000 if CPU_AT32AP700X=y
 
 source "kernel/Kconfig.preempt"
 
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index f75d52cd2a4..17a3529341d 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -16,7 +16,7 @@ KBUILD_AFLAGS	+= -mrelax -mno-pic
 CFLAGS_MODULE	+= -mno-relax
 LDFLAGS_vmlinux	+= --relax
 
-cpuflags-$(CONFIG_CPU_AT32AP7000)	+= -mcpu=ap7000
+cpuflags-$(CONFIG_PLATFORM_AT32AP)	+= -march=ap
 
 KBUILD_CFLAGS	+= $(cpuflags-y)
 KBUILD_AFLAGS	+= $(cpuflags-y)
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 52987c81d66..a398be28496 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -20,7 +20,7 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap7000.h>
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
 #include <asm/arch/portmux.h>
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index b799a68ffd9..374c17bcc05 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -111,7 +111,10 @@ CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
 CONFIG_CPU_AT32AP7000=y
+# CONFIG_CPU_AT32AP7001 is not set
+# CONFIG_CPU_AT32AP7002 is not set
 # CONFIG_BOARD_ATSTK1000 is not set
 CONFIG_BOARD_ATNGW100=y
 CONFIG_LOADER_U_BOOT=y
@@ -119,9 +122,9 @@ CONFIG_LOADER_U_BOOT=y
 #
 # Atmel AVR32 AP options
 #
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
 CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_ENTRY_ADDRESS=0x90000000
 CONFIG_PHYS_OFFSET=0x10000000
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 3b977fdbaa7..7614c5465cd 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -114,6 +114,8 @@ CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PLATFORM_AT32AP=y
 CONFIG_CPU_AT32AP7000=y
+# CONFIG_CPU_AT32AP7001 is not set
+# CONFIG_CPU_AT32AP7002 is not set
 CONFIG_BOARD_ATSTK1002=y
 CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATNGW100 is not set
@@ -122,9 +124,9 @@ CONFIG_LOADER_U_BOOT=y
 #
 # Atmel AVR32 AP options
 #
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
 CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_ENTRY_ADDRESS=0x90000000
 CONFIG_PHYS_OFFSET=0x10000000
diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
index eb307838457..a7bbcc82058 100644
--- a/arch/avr32/mach-at32ap/Kconfig
+++ b/arch/avr32/mach-at32ap/Kconfig
@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
 menu "Atmel AVR32 AP options"
 
 choice
-	prompt "AT32AP7000 static memory bus width"
-	depends on CPU_AT32AP7000
-	default AP7000_16_BIT_SMC
+	prompt "AT32AP700x static memory bus width"
+	depends on CPU_AT32AP700X
+	default AP700X_16_BIT_SMC
 	help
 	  Define the width of the AP7000 external static memory interface.
 	  This is used to determine how to mangle the address and/or data
@@ -15,13 +15,13 @@ choice
 	  width for all chip selects, excluding the flash (which is using
 	  raw access and is thus not affected by any of this.)
 
-config AP7000_32_BIT_SMC
+config AP700X_32_BIT_SMC
 	bool "32 bit"
 
-config AP7000_16_BIT_SMC
+config AP700X_16_BIT_SMC
 	bool "16 bit"
 
-config AP7000_8_BIT_SMC
+config AP700X_8_BIT_SMC
 	bool "8 bit"
 
 endchoice
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index a8b445046e3..5e9f8217bef 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,4 +1,4 @@
 obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
-obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
-obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
+obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o
+obj-$(CONFIG_CPU_AT32AP700X)	+= time-tc.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
deleted file mode 100644
index 7c4388f4f17..00000000000
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ /dev/null
@@ -1,1730 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-
-#include <asm/io.h>
-
-#include <asm/arch/at32ap7000.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
-
-#include <video/atmel_lcdc.h>
-
-#include "clock.h"
-#include "hmatrix.h"
-#include "pio.h"
-#include "pm.h"
-
-
-#define PBMEM(base)					\
-	{						\
-		.start		= base,			\
-		.end		= base + 0x3ff,		\
-		.flags		= IORESOURCE_MEM,	\
-	}
-#define IRQ(num)					\
-	{						\
-		.start		= num,			\
-		.end		= num,			\
-		.flags		= IORESOURCE_IRQ,	\
-	}
-#define NAMED_IRQ(num, _name)				\
-	{						\
-		.start		= num,			\
-		.end		= num,			\
-		.name		= _name,		\
-		.flags		= IORESOURCE_IRQ,	\
-	}
-
-/* REVISIT these assume *every* device supports DMA, but several
- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
- */
-#define DEFINE_DEV(_name, _id)					\
-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
-static struct platform_device _name##_id##_device = {		\
-	.name		= #_name,				\
-	.id		= _id,					\
-	.dev		= {					\
-		.dma_mask = &_name##_id##_dma_mask,		\
-		.coherent_dma_mask = DMA_32BIT_MASK,		\
-	},							\
-	.resource	= _name##_id##_resource,		\
-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
-}
-#define DEFINE_DEV_DATA(_name, _id)				\
-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
-static struct platform_device _name##_id##_device = {		\
-	.name		= #_name,				\
-	.id		= _id,					\
-	.dev		= {					\
-		.dma_mask = &_name##_id##_dma_mask,		\
-		.platform_data	= &_name##_id##_data,		\
-		.coherent_dma_mask = DMA_32BIT_MASK,		\
-	},							\
-	.resource	= _name##_id##_resource,		\
-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
-}
-
-#define select_peripheral(pin, periph, flags)			\
-	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
-
-#define DEV_CLK(_name, devname, bus, _index)			\
-static struct clk devname##_##_name = {				\
-	.name		= #_name,				\
-	.dev		= &devname##_device.dev,		\
-	.parent		= &bus##_clk,				\
-	.mode		= bus##_clk_mode,			\
-	.get_rate	= bus##_clk_get_rate,			\
-	.index		= _index,				\
-}
-
-static DEFINE_SPINLOCK(pm_lock);
-
-unsigned long at32ap7000_osc_rates[3] = {
-	[0] = 32768,
-	/* FIXME: these are ATSTK1002-specific */
-	[1] = 20000000,
-	[2] = 12000000,
-};
-
-static unsigned long osc_get_rate(struct clk *clk)
-{
-	return at32ap7000_osc_rates[clk->index];
-}
-
-static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
-{
-	unsigned long div, mul, rate;
-
-	if (!(control & PM_BIT(PLLEN)))
-		return 0;
-
-	div = PM_BFEXT(PLLDIV, control) + 1;
-	mul = PM_BFEXT(PLLMUL, control) + 1;
-
-	rate = clk->parent->get_rate(clk->parent);
-	rate = (rate + div / 2) / div;
-	rate *= mul;
-
-	return rate;
-}
-
-static unsigned long pll0_get_rate(struct clk *clk)
-{
-	u32 control;
-
-	control = pm_readl(PLL0);
-
-	return pll_get_rate(clk, control);
-}
-
-static unsigned long pll1_get_rate(struct clk *clk)
-{
-	u32 control;
-
-	control = pm_readl(PLL1);
-
-	return pll_get_rate(clk, control);
-}
-
-/*
- * The AT32AP7000 has five primary clock sources: One 32kHz
- * oscillator, two crystal oscillators and two PLLs.
- */
-static struct clk osc32k = {
-	.name		= "osc32k",
-	.get_rate	= osc_get_rate,
-	.users		= 1,
-	.index		= 0,
-};
-static struct clk osc0 = {
-	.name		= "osc0",
-	.get_rate	= osc_get_rate,
-	.users		= 1,
-	.index		= 1,
-};
-static struct clk osc1 = {
-	.name		= "osc1",
-	.get_rate	= osc_get_rate,
-	.index		= 2,
-};
-static struct clk pll0 = {
-	.name		= "pll0",
-	.get_rate	= pll0_get_rate,
-	.parent		= &osc0,
-};
-static struct clk pll1 = {
-	.name		= "pll1",
-	.get_rate	= pll1_get_rate,
-	.parent		= &osc0,
-};
-
-/*
- * The main clock can be either osc0 or pll0.  The boot loader may
- * have chosen one for us, so we don't really know which one until we
- * have a look at the SM.
- */
-static struct clk *main_clock;
-
-/*
- * Synchronous clocks are generated from the main clock. The clocks
- * must satisfy the constraint
- *   fCPU >= fHSB >= fPB
- * i.e. each clock must not be faster than its parent.
- */
-static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
-{
-	return main_clock->get_rate(main_clock) >> shift;
-};
-
-static void cpu_clk_mode(struct clk *clk, int enabled)
-{
-	unsigned long flags;
-	u32 mask;
-
-	spin_lock_irqsave(&pm_lock, flags);
-	mask = pm_readl(CPU_MASK);
-	if (enabled)
-		mask |= 1 << clk->index;
-	else
-		mask &= ~(1 << clk->index);
-	pm_writel(CPU_MASK, mask);
-	spin_unlock_irqrestore(&pm_lock, flags);
-}
-
-static unsigned long cpu_clk_get_rate(struct clk *clk)
-{
-	unsigned long cksel, shift = 0;
-
-	cksel = pm_readl(CKSEL);
-	if (cksel & PM_BIT(CPUDIV))
-		shift = PM_BFEXT(CPUSEL, cksel) + 1;
-
-	return bus_clk_get_rate(clk, shift);
-}
-
-static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
-{
-	u32 control;
-	unsigned long parent_rate, child_div, actual_rate, div;
-
-	parent_rate = clk->parent->get_rate(clk->parent);
-	control = pm_readl(CKSEL);
-
-	if (control & PM_BIT(HSBDIV))
-		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
-	else
-		child_div = 1;
-
-	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
-		actual_rate = parent_rate;
-		control &= ~PM_BIT(CPUDIV);
-	} else {
-		unsigned int cpusel;
-		div = (parent_rate + rate / 2) / rate;
-		if (div > child_div)
-			div = child_div;
-		cpusel = (div > 1) ? (fls(div) - 2) : 0;
-		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
-		actual_rate = parent_rate / (1 << (cpusel + 1));
-	}
-
-	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-			clk->name, rate, actual_rate);
-
-	if (apply)
-		pm_writel(CKSEL, control);
-
-	return actual_rate;
-}
-
-static void hsb_clk_mode(struct clk *clk, int enabled)
-{
-	unsigned long flags;
-	u32 mask;
-
-	spin_lock_irqsave(&pm_lock, flags);
-	mask = pm_readl(HSB_MASK);
-	if (enabled)
-		mask |= 1 << clk->index;
-	else
-		mask &= ~(1 << clk->index);
-	pm_writel(HSB_MASK, mask);
-	spin_unlock_irqrestore(&pm_lock, flags);
-}
-
-static unsigned long hsb_clk_get_rate(struct clk *clk)
-{
-	unsigned long cksel, shift = 0;
-
-	cksel = pm_readl(CKSEL);
-	if (cksel & PM_BIT(HSBDIV))
-		shift = PM_BFEXT(HSBSEL, cksel) + 1;
-
-	return bus_clk_get_rate(clk, shift);
-}
-
-static void pba_clk_mode(struct clk *clk, int enabled)
-{
-	unsigned long flags;
-	u32 mask;
-
-	spin_lock_irqsave(&pm_lock, flags);
-	mask = pm_readl(PBA_MASK);
-	if (enabled)
-		mask |= 1 << clk->index;
-	else
-		mask &= ~(1 << clk->index);
-	pm_writel(PBA_MASK, mask);
-	spin_unlock_irqrestore(&pm_lock, flags);
-}
-
-static unsigned long pba_clk_get_rate(struct clk *clk)
-{
-	unsigned long cksel, shift = 0;
-
-	cksel = pm_readl(CKSEL);
-	if (cksel & PM_BIT(PBADIV))
-		shift = PM_BFEXT(PBASEL, cksel) + 1;
-
-	return bus_clk_get_rate(clk, shift);
-}
-
-static void pbb_clk_mode(struct clk *clk, int enabled)
-{
-	unsigned long flags;
-	u32 mask;
-
-	spin_lock_irqsave(&pm_lock, flags);
-	mask = pm_readl(PBB_MASK);
-	if (enabled)
-		mask |= 1 << clk->index;
-	else
-		mask &= ~(1 << clk->index);
-	pm_writel(PBB_MASK, mask);
-	spin_unlock_irqrestore(&pm_lock, flags);
-}
-
-static unsigned long pbb_clk_get_rate(struct clk *clk)
-{
-	unsigned long cksel, shift = 0;
-
-	cksel = pm_readl(CKSEL);
-	if (cksel & PM_BIT(PBBDIV))
-		shift = PM_BFEXT(PBBSEL, cksel) + 1;
-
-	return bus_clk_get_rate(clk, shift);
-}
-
-static struct clk cpu_clk = {
-	.name		= "cpu",
-	.get_rate	= cpu_clk_get_rate,
-	.set_rate	= cpu_clk_set_rate,
-	.users		= 1,
-};
-static struct clk hsb_clk = {
-	.name		= "hsb",
-	.parent		= &cpu_clk,
-	.get_rate	= hsb_clk_get_rate,
-};
-static struct clk pba_clk = {
-	.name		= "pba",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= pba_clk_get_rate,
-	.index		= 1,
-};
-static struct clk pbb_clk = {
-	.name		= "pbb",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.users		= 1,
-	.index		= 2,
-};
-
-/* --------------------------------------------------------------------
- *  Generic Clock operations
- * -------------------------------------------------------------------- */
-
-static void genclk_mode(struct clk *clk, int enabled)
-{
-	u32 control;
-
-	control = pm_readl(GCCTRL(clk->index));
-	if (enabled)
-		control |= PM_BIT(CEN);
-	else
-		control &= ~PM_BIT(CEN);
-	pm_writel(GCCTRL(clk->index), control);
-}
-
-static unsigned long genclk_get_rate(struct clk *clk)
-{
-	u32 control;
-	unsigned long div = 1;
-
-	control = pm_readl(GCCTRL(clk->index));
-	if (control & PM_BIT(DIVEN))
-		div = 2 * (PM_BFEXT(DIV, control) + 1);
-
-	return clk->parent->get_rate(clk->parent) / div;
-}
-
-static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
-{
-	u32 control;
-	unsigned long parent_rate, actual_rate, div;
-
-	parent_rate = clk->parent->get_rate(clk->parent);
-	control = pm_readl(GCCTRL(clk->index));
-
-	if (rate > 3 * parent_rate / 4) {
-		actual_rate = parent_rate;
-		control &= ~PM_BIT(DIVEN);
-	} else {
-		div = (parent_rate + rate) / (2 * rate) - 1;
-		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
-		actual_rate = parent_rate / (2 * (div + 1));
-	}
-
-	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
-		clk->name, rate, actual_rate);
-
-	if (apply)
-		pm_writel(GCCTRL(clk->index), control);
-
-	return actual_rate;
-}
-
-int genclk_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 control;
-
-	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
-		clk->name, parent->name, clk->parent->name);
-
-	control = pm_readl(GCCTRL(clk->index));
-
-	if (parent == &osc1 || parent == &pll1)
-		control |= PM_BIT(OSCSEL);
-	else if (parent == &osc0 || parent == &pll0)
-		control &= ~PM_BIT(OSCSEL);
-	else
-		return -EINVAL;
-
-	if (parent == &pll0 || parent == &pll1)
-		control |= PM_BIT(PLLSEL);
-	else
-		control &= ~PM_BIT(PLLSEL);
-
-	pm_writel(GCCTRL(clk->index), control);
-	clk->parent = parent;
-
-	return 0;
-}
-
-static void __init genclk_init_parent(struct clk *clk)
-{
-	u32 control;
-	struct clk *parent;
-
-	BUG_ON(clk->index > 7);
-
-	control = pm_readl(GCCTRL(clk->index));
-	if (control & PM_BIT(OSCSEL))
-		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
-	else
-		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
-
-	clk->parent = parent;
-}
-
-/* --------------------------------------------------------------------
- *  System peripherals
- * -------------------------------------------------------------------- */
-static struct resource at32_pm0_resource[] = {
-	{
-		.start	= 0xfff00000,
-		.end	= 0xfff0007f,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(20),
-};
-
-static struct resource at32ap700x_rtc0_resource[] = {
-	{
-		.start	= 0xfff00080,
-		.end	= 0xfff000af,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(21),
-};
-
-static struct resource at32_wdt0_resource[] = {
-	{
-		.start	= 0xfff000b0,
-		.end	= 0xfff000cf,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource at32_eic0_resource[] = {
-	{
-		.start	= 0xfff00100,
-		.end	= 0xfff0013f,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(19),
-};
-
-DEFINE_DEV(at32_pm, 0);
-DEFINE_DEV(at32ap700x_rtc, 0);
-DEFINE_DEV(at32_wdt, 0);
-DEFINE_DEV(at32_eic, 0);
-
-/*
- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
- * is always running.
- */
-static struct clk at32_pm_pclk = {
-	.name		= "pclk",
-	.dev		= &at32_pm0_device.dev,
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.users		= 1,
-	.index		= 0,
-};
-
-static struct resource intc0_resource[] = {
-	PBMEM(0xfff00400),
-};
-struct platform_device at32_intc0_device = {
-	.name		= "intc",
-	.id		= 0,
-	.resource	= intc0_resource,
-	.num_resources	= ARRAY_SIZE(intc0_resource),
-};
-DEV_CLK(pclk, at32_intc0, pbb, 1);
-
-static struct clk ebi_clk = {
-	.name		= "ebi",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= hsb_clk_get_rate,
-	.users		= 1,
-};
-static struct clk hramc_clk = {
-	.name		= "hramc",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= hsb_clk_get_rate,
-	.users		= 1,
-	.index		= 3,
-};
-
-static struct resource smc0_resource[] = {
-	PBMEM(0xfff03400),
-};
-DEFINE_DEV(smc, 0);
-DEV_CLK(pclk, smc0, pbb, 13);
-DEV_CLK(mck, smc0, hsb, 0);
-
-static struct platform_device pdc_device = {
-	.name		= "pdc",
-	.id		= 0,
-};
-DEV_CLK(hclk, pdc, hsb, 4);
-DEV_CLK(pclk, pdc, pba, 16);
-
-static struct clk pico_clk = {
-	.name		= "pico",
-	.parent		= &cpu_clk,
-	.mode		= cpu_clk_mode,
-	.get_rate	= cpu_clk_get_rate,
-	.users		= 1,
-};
-
-static struct resource dmaca0_resource[] = {
-	{
-		.start	= 0xff200000,
-		.end	= 0xff20ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(2),
-};
-DEFINE_DEV(dmaca, 0);
-DEV_CLK(hclk, dmaca0, hsb, 10);
-
-/* --------------------------------------------------------------------
- * HMATRIX
- * -------------------------------------------------------------------- */
-
-static struct clk hmatrix_clk = {
-	.name		= "hmatrix_clk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 2,
-	.users		= 1,
-};
-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
-
-#define hmatrix_readl(reg)					\
-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-#define hmatrix_writel(reg,value)				\
-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
-
-/*
- * Set bits in the HMATRIX Special Function Register (SFR) used by the
- * External Bus Interface (EBI). This can be used to enable special
- * features like CompactFlash support, NAND Flash support, etc. on
- * certain chipselects.
- */
-static inline void set_ebi_sfr_bits(u32 mask)
-{
-	u32 sfr;
-
-	clk_enable(&hmatrix_clk);
-	sfr = hmatrix_readl(SFR4);
-	sfr |= mask;
-	hmatrix_writel(SFR4, sfr);
-	clk_disable(&hmatrix_clk);
-}
-
-/* --------------------------------------------------------------------
- *  System Timer/Counter (TC)
- * -------------------------------------------------------------------- */
-static struct resource at32_systc0_resource[] = {
-	PBMEM(0xfff00c00),
-	IRQ(22),
-};
-struct platform_device at32_systc0_device = {
-	.name		= "systc",
-	.id		= 0,
-	.resource	= at32_systc0_resource,
-	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
-};
-DEV_CLK(pclk, at32_systc0, pbb, 3);
-
-/* --------------------------------------------------------------------
- *  PIO
- * -------------------------------------------------------------------- */
-
-static struct resource pio0_resource[] = {
-	PBMEM(0xffe02800),
-	IRQ(13),
-};
-DEFINE_DEV(pio, 0);
-DEV_CLK(mck, pio0, pba, 10);
-
-static struct resource pio1_resource[] = {
-	PBMEM(0xffe02c00),
-	IRQ(14),
-};
-DEFINE_DEV(pio, 1);
-DEV_CLK(mck, pio1, pba, 11);
-
-static struct resource pio2_resource[] = {
-	PBMEM(0xffe03000),
-	IRQ(15),
-};
-DEFINE_DEV(pio, 2);
-DEV_CLK(mck, pio2, pba, 12);
-
-static struct resource pio3_resource[] = {
-	PBMEM(0xffe03400),
-	IRQ(16),
-};
-DEFINE_DEV(pio, 3);
-DEV_CLK(mck, pio3, pba, 13);
-
-static struct resource pio4_resource[] = {
-	PBMEM(0xffe03800),
-	IRQ(17),
-};
-DEFINE_DEV(pio, 4);
-DEV_CLK(mck, pio4, pba, 14);
-
-void __init at32_add_system_devices(void)
-{
-	platform_device_register(&at32_pm0_device);
-	platform_device_register(&at32_intc0_device);
-	platform_device_register(&at32ap700x_rtc0_device);
-	platform_device_register(&at32_wdt0_device);
-	platform_device_register(&at32_eic0_device);
-	platform_device_register(&smc0_device);
-	platform_device_register(&pdc_device);
-	platform_device_register(&dmaca0_device);
-
-	platform_device_register(&at32_systc0_device);
-
-	platform_device_register(&pio0_device);
-	platform_device_register(&pio1_device);
-	platform_device_register(&pio2_device);
-	platform_device_register(&pio3_device);
-	platform_device_register(&pio4_device);
-}
-
-/* --------------------------------------------------------------------
- *  USART
- * -------------------------------------------------------------------- */
-
-static struct atmel_uart_data atmel_usart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-static struct resource atmel_usart0_resource[] = {
-	PBMEM(0xffe00c00),
-	IRQ(6),
-};
-DEFINE_DEV_DATA(atmel_usart, 0);
-DEV_CLK(usart, atmel_usart0, pba, 3);
-
-static struct atmel_uart_data atmel_usart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-static struct resource atmel_usart1_resource[] = {
-	PBMEM(0xffe01000),
-	IRQ(7),
-};
-DEFINE_DEV_DATA(atmel_usart, 1);
-DEV_CLK(usart, atmel_usart1, pba, 4);
-
-static struct atmel_uart_data atmel_usart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-static struct resource atmel_usart2_resource[] = {
-	PBMEM(0xffe01400),
-	IRQ(8),
-};
-DEFINE_DEV_DATA(atmel_usart, 2);
-DEV_CLK(usart, atmel_usart2, pba, 5);
-
-static struct atmel_uart_data atmel_usart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-static struct resource atmel_usart3_resource[] = {
-	PBMEM(0xffe01800),
-	IRQ(9),
-};
-DEFINE_DEV_DATA(atmel_usart, 3);
-DEV_CLK(usart, atmel_usart3, pba, 6);
-
-static inline void configure_usart0_pins(void)
-{
-	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
-}
-
-static inline void configure_usart1_pins(void)
-{
-	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
-	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
-}
-
-static inline void configure_usart2_pins(void)
-{
-	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
-}
-
-static inline void configure_usart3_pins(void)
-{
-	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
-}
-
-static struct platform_device *__initdata at32_usarts[4];
-
-void __init at32_map_usart(unsigned int hw_id, unsigned int line)
-{
-	struct platform_device *pdev;
-
-	switch (hw_id) {
-	case 0:
-		pdev = &atmel_usart0_device;
-		configure_usart0_pins();
-		break;
-	case 1:
-		pdev = &atmel_usart1_device;
-		configure_usart1_pins();
-		break;
-	case 2:
-		pdev = &atmel_usart2_device;
-		configure_usart2_pins();
-		break;
-	case 3:
-		pdev = &atmel_usart3_device;
-		configure_usart3_pins();
-		break;
-	default:
-		return;
-	}
-
-	if (PXSEG(pdev->resource[0].start) == P4SEG) {
-		/* Addresses in the P4 segment are permanently mapped 1:1 */
-		struct atmel_uart_data *data = pdev->dev.platform_data;
-		data->regs = (void __iomem *)pdev->resource[0].start;
-	}
-
-	pdev->id = line;
-	at32_usarts[line] = pdev;
-}
-
-struct platform_device *__init at32_add_device_usart(unsigned int id)
-{
-	platform_device_register(at32_usarts[id]);
-	return at32_usarts[id];
-}
-
-struct platform_device *atmel_default_console_device;
-
-void __init at32_setup_serial_console(unsigned int usart_id)
-{
-	atmel_default_console_device = at32_usarts[usart_id];
-}
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-static struct eth_platform_data macb0_data;
-static struct resource macb0_resource[] = {
-	PBMEM(0xfff01800),
-	IRQ(25),
-};
-DEFINE_DEV_DATA(macb, 0);
-DEV_CLK(hclk, macb0, hsb, 8);
-DEV_CLK(pclk, macb0, pbb, 6);
-
-static struct eth_platform_data macb1_data;
-static struct resource macb1_resource[] = {
-	PBMEM(0xfff01c00),
-	IRQ(26),
-};
-DEFINE_DEV_DATA(macb, 1);
-DEV_CLK(hclk, macb1, hsb, 9);
-DEV_CLK(pclk, macb1, pbb, 7);
-
-struct platform_device *__init
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
-{
-	struct platform_device *pdev;
-
-	switch (id) {
-	case 0:
-		pdev = &macb0_device;
-
-		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
-		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
-		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
-		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
-		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
-		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
-		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
-		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
-		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
-		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
-
-		if (!data->is_rmii) {
-			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
-			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
-			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
-			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
-			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
-			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
-			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
-			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
-			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
-		}
-		break;
-
-	case 1:
-		pdev = &macb1_device;
-
-		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
-		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
-		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
-		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
-		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
-		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
-		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
-		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
-		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
-		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
-
-		if (!data->is_rmii) {
-			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
-			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
-			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
-			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
-			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
-			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
-			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
-			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
-			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
-		}
-		break;
-
-	default:
-		return NULL;
-	}
-
-	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
-	platform_device_register(pdev);
-
-	return pdev;
-}
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-static struct resource atmel_spi0_resource[] = {
-	PBMEM(0xffe00000),
-	IRQ(3),
-};
-DEFINE_DEV(atmel_spi, 0);
-DEV_CLK(spi_clk, atmel_spi0, pba, 0);
-
-static struct resource atmel_spi1_resource[] = {
-	PBMEM(0xffe00400),
-	IRQ(4),
-};
-DEFINE_DEV(atmel_spi, 1);
-DEV_CLK(spi_clk, atmel_spi1, pba, 1);
-
-static void __init
-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
-		      unsigned int n, const u8 *pins)
-{
-	unsigned int pin, mode;
-
-	for (; n; n--, b++) {
-		b->bus_num = bus_num;
-		if (b->chip_select >= 4)
-			continue;
-		pin = (unsigned)b->controller_data;
-		if (!pin) {
-			pin = pins[b->chip_select];
-			b->controller_data = (void *)pin;
-		}
-		mode = AT32_GPIOF_OUTPUT;
-		if (!(b->mode & SPI_CS_HIGH))
-			mode |= AT32_GPIOF_HIGH;
-		at32_select_gpio(pin, mode);
-	}
-}
-
-struct platform_device *__init
-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
-{
-	/*
-	 * Manage the chipselects as GPIOs, normally using the same pins
-	 * the SPI controller expects; but boards can use other pins.
-	 */
-	static u8 __initdata spi0_pins[] =
-		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
-		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
-	static u8 __initdata spi1_pins[] =
-		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
-		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
-	struct platform_device *pdev;
-
-	switch (id) {
-	case 0:
-		pdev = &atmel_spi0_device;
-		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
-		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
-		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
-		at32_spi_setup_slaves(0, b, n, spi0_pins);
-		break;
-
-	case 1:
-		pdev = &atmel_spi1_device;
-		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
-		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
-		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
-		at32_spi_setup_slaves(1, b, n, spi1_pins);
-		break;
-
-	default:
-		return NULL;
-	}
-
-	spi_register_board_info(b, n);
-	platform_device_register(pdev);
-	return pdev;
-}
-
-/* --------------------------------------------------------------------
- *  TWI
- * -------------------------------------------------------------------- */
-static struct resource atmel_twi0_resource[] __initdata = {
-	PBMEM(0xffe00800),
-	IRQ(5),
-};
-static struct clk atmel_twi0_pclk = {
-	.name		= "twi_pclk",
-	.parent		= &pba_clk,
-	.mode		= pba_clk_mode,
-	.get_rate	= pba_clk_get_rate,
-	.index		= 2,
-};
-
-struct platform_device *__init at32_add_device_twi(unsigned int id)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("atmel_twi", id);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, atmel_twi0_resource,
-				ARRAY_SIZE(atmel_twi0_resource)))
-		goto err_add_resources;
-
-	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
-	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
-
-	atmel_twi0_pclk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-	return pdev;
-
-err_add_resources:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- * MMC
- * -------------------------------------------------------------------- */
-static struct resource atmel_mci0_resource[] __initdata = {
-	PBMEM(0xfff02400),
-	IRQ(28),
-};
-static struct clk atmel_mci0_pclk = {
-	.name		= "mci_clk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 9,
-};
-
-struct platform_device *__init at32_add_device_mci(unsigned int id)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("atmel_mci", id);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, atmel_mci0_resource,
-				ARRAY_SIZE(atmel_mci0_resource)))
-		goto err_add_resources;
-
-	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
-	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
-	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
-	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
-	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
-
-	atmel_mci0_pclk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-	return pdev;
-
-err_add_resources:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- *  LCDC
- * -------------------------------------------------------------------- */
-static struct atmel_lcdfb_info atmel_lcdfb0_data;
-static struct resource atmel_lcdfb0_resource[] = {
-	{
-		.start		= 0xff000000,
-		.end		= 0xff000fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	IRQ(1),
-	{
-		/* Placeholder for pre-allocated fb memory */
-		.start		= 0x00000000,
-		.end		= 0x00000000,
-		.flags		= 0,
-	},
-};
-DEFINE_DEV_DATA(atmel_lcdfb, 0);
-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
-static struct clk atmel_lcdfb0_pixclk = {
-	.name		= "lcdc_clk",
-	.dev		= &atmel_lcdfb0_device.dev,
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 7,
-};
-
-struct platform_device *__init
-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-		     unsigned long fbmem_start, unsigned long fbmem_len)
-{
-	struct platform_device *pdev;
-	struct atmel_lcdfb_info *info;
-	struct fb_monspecs *monspecs;
-	struct fb_videomode *modedb;
-	unsigned int modedb_size;
-
-	/*
-	 * Do a deep copy of the fb data, monspecs and modedb. Make
-	 * sure all allocations are done before setting up the
-	 * portmux.
-	 */
-	monspecs = kmemdup(data->default_monspecs,
-			   sizeof(struct fb_monspecs), GFP_KERNEL);
-	if (!monspecs)
-		return NULL;
-
-	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
-	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
-	if (!modedb)
-		goto err_dup_modedb;
-	monspecs->modedb = modedb;
-
-	switch (id) {
-	case 0:
-		pdev = &atmel_lcdfb0_device;
-		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
-		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
-		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
-		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
-		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
-		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
-		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
-		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
-		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
-		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
-		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
-		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
-		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
-		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
-		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
-		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
-		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
-		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
-		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
-		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-
-		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-		break;
-
-	default:
-		goto err_invalid_id;
-	}
-
-	if (fbmem_len) {
-		pdev->resource[2].start = fbmem_start;
-		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
-		pdev->resource[2].flags = IORESOURCE_MEM;
-	}
-
-	info = pdev->dev.platform_data;
-	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
-	info->default_monspecs = monspecs;
-
-	platform_device_register(pdev);
-	return pdev;
-
-err_invalid_id:
-	kfree(modedb);
-err_dup_modedb:
-	kfree(monspecs);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- *  SSC
- * -------------------------------------------------------------------- */
-static struct resource ssc0_resource[] = {
-	PBMEM(0xffe01c00),
-	IRQ(10),
-};
-DEFINE_DEV(ssc, 0);
-DEV_CLK(pclk, ssc0, pba, 7);
-
-static struct resource ssc1_resource[] = {
-	PBMEM(0xffe02000),
-	IRQ(11),
-};
-DEFINE_DEV(ssc, 1);
-DEV_CLK(pclk, ssc1, pba, 8);
-
-static struct resource ssc2_resource[] = {
-	PBMEM(0xffe02400),
-	IRQ(12),
-};
-DEFINE_DEV(ssc, 2);
-DEV_CLK(pclk, ssc2, pba, 9);
-
-struct platform_device *__init
-at32_add_device_ssc(unsigned int id, unsigned int flags)
-{
-	struct platform_device *pdev;
-
-	switch (id) {
-	case 0:
-		pdev = &ssc0_device;
-		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
-		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
-		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
-		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
-		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
-		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
-		break;
-	case 1:
-		pdev = &ssc1_device;
-		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
-		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
-		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
-		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
-		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
-		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
-		break;
-	case 2:
-		pdev = &ssc2_device;
-		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
-		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
-		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
-		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
-		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
-		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
-		break;
-	default:
-		return NULL;
-	}
-
-	platform_device_register(pdev);
-	return pdev;
-}
-
-/* --------------------------------------------------------------------
- *  USB Device Controller
- * -------------------------------------------------------------------- */
-static struct resource usba0_resource[] __initdata = {
-	{
-		.start		= 0xff300000,
-		.end		= 0xff3fffff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= 0xfff03000,
-		.end		= 0xfff033ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	IRQ(31),
-};
-static struct clk usba0_pclk = {
-	.name		= "pclk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 12,
-};
-static struct clk usba0_hclk = {
-	.name		= "hclk",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= hsb_clk_get_rate,
-	.index		= 6,
-};
-
-struct platform_device *__init
-at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("atmel_usba_udc", 0);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, usba0_resource,
-					  ARRAY_SIZE(usba0_resource)))
-		goto out_free_pdev;
-
-	if (data) {
-		if (platform_device_add_data(pdev, data, sizeof(*data)))
-			goto out_free_pdev;
-
-		if (data->vbus_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->vbus_pin, 0);
-	}
-
-	usba0_pclk.dev = &pdev->dev;
-	usba0_hclk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-
-	return pdev;
-
-out_free_pdev:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- * IDE / CompactFlash
- * -------------------------------------------------------------------- */
-static struct resource at32_smc_cs4_resource[] __initdata = {
-	{
-		.start	= 0x04000000,
-		.end	= 0x07ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(~0UL), /* Magic IRQ will be overridden */
-};
-static struct resource at32_smc_cs5_resource[] __initdata = {
-	{
-		.start	= 0x20000000,
-		.end	= 0x23ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(~0UL), /* Magic IRQ will be overridden */
-};
-
-static int __init at32_init_ide_or_cf(struct platform_device *pdev,
-		unsigned int cs, unsigned int extint)
-{
-	static unsigned int extint_pin_map[4] __initdata = {
-		GPIO_PIN_PB(25),
-		GPIO_PIN_PB(26),
-		GPIO_PIN_PB(27),
-		GPIO_PIN_PB(28),
-	};
-	static bool common_pins_initialized __initdata = false;
-	unsigned int extint_pin;
-	int ret;
-
-	if (extint >= ARRAY_SIZE(extint_pin_map))
-		return -EINVAL;
-	extint_pin = extint_pin_map[extint];
-
-	switch (cs) {
-	case 4:
-		ret = platform_device_add_resources(pdev,
-				at32_smc_cs4_resource,
-				ARRAY_SIZE(at32_smc_cs4_resource));
-		if (ret)
-			return ret;
-
-		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
-		break;
-	case 5:
-		ret = platform_device_add_resources(pdev,
-				at32_smc_cs5_resource,
-				ARRAY_SIZE(at32_smc_cs5_resource));
-		if (ret)
-			return ret;
-
-		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (!common_pins_initialized) {
-		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
-		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
-		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
-		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
-		common_pins_initialized = true;
-	}
-
-	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
-
-	pdev->resource[1].start = EIM_IRQ_BASE + extint;
-	pdev->resource[1].end = pdev->resource[1].start;
-
-	return 0;
-}
-
-struct platform_device *__init
-at32_add_device_ide(unsigned int id, unsigned int extint,
-		    struct ide_platform_data *data)
-{
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc("at32_ide", id);
-	if (!pdev)
-		goto fail;
-
-	if (platform_device_add_data(pdev, data,
-				sizeof(struct ide_platform_data)))
-		goto fail;
-
-	if (at32_init_ide_or_cf(pdev, data->cs, extint))
-		goto fail;
-
-	platform_device_add(pdev);
-	return pdev;
-
-fail:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-struct platform_device *__init
-at32_add_device_cf(unsigned int id, unsigned int extint,
-		    struct cf_platform_data *data)
-{
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc("at32_cf", id);
-	if (!pdev)
-		goto fail;
-
-	if (platform_device_add_data(pdev, data,
-				sizeof(struct cf_platform_data)))
-		goto fail;
-
-	if (at32_init_ide_or_cf(pdev, data->cs, extint))
-		goto fail;
-
-	if (data->detect_pin != GPIO_PIN_NONE)
-		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-	if (data->reset_pin != GPIO_PIN_NONE)
-		at32_select_gpio(data->reset_pin, 0);
-	if (data->vcc_pin != GPIO_PIN_NONE)
-		at32_select_gpio(data->vcc_pin, 0);
-	/* READY is used as extint, so we can't select it as gpio */
-
-	platform_device_add(pdev);
-	return pdev;
-
-fail:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- * AC97C
- * -------------------------------------------------------------------- */
-static struct resource atmel_ac97c0_resource[] __initdata = {
-	PBMEM(0xfff02800),
-	IRQ(29),
-};
-static struct clk atmel_ac97c0_pclk = {
-	.name		= "pclk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 10,
-};
-
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("atmel_ac97c", id);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
-				ARRAY_SIZE(atmel_ac97c0_resource)))
-		goto err_add_resources;
-
-	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
-
-	atmel_ac97c0_pclk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-	return pdev;
-
-err_add_resources:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- * ABDAC
- * -------------------------------------------------------------------- */
-static struct resource abdac0_resource[] __initdata = {
-	PBMEM(0xfff02000),
-	IRQ(27),
-};
-static struct clk abdac0_pclk = {
-	.name		= "pclk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 8,
-};
-static struct clk abdac0_sample_clk = {
-	.name		= "sample_clk",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 6,
-};
-
-struct platform_device *__init at32_add_device_abdac(unsigned int id)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("abdac", id);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, abdac0_resource,
-				ARRAY_SIZE(abdac0_resource)))
-		goto err_add_resources;
-
-	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
-	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
-	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
-	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
-
-	abdac0_pclk.dev = &pdev->dev;
-	abdac0_sample_clk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-	return pdev;
-
-err_add_resources:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- *  GCLK
- * -------------------------------------------------------------------- */
-static struct clk gclk0 = {
-	.name		= "gclk0",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 0,
-};
-static struct clk gclk1 = {
-	.name		= "gclk1",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 1,
-};
-static struct clk gclk2 = {
-	.name		= "gclk2",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 2,
-};
-static struct clk gclk3 = {
-	.name		= "gclk3",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 3,
-};
-static struct clk gclk4 = {
-	.name		= "gclk4",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 4,
-};
-
-struct clk *at32_clock_list[] = {
-	&osc32k,
-	&osc0,
-	&osc1,
-	&pll0,
-	&pll1,
-	&cpu_clk,
-	&hsb_clk,
-	&pba_clk,
-	&pbb_clk,
-	&at32_pm_pclk,
-	&at32_intc0_pclk,
-	&hmatrix_clk,
-	&ebi_clk,
-	&hramc_clk,
-	&smc0_pclk,
-	&smc0_mck,
-	&pdc_hclk,
-	&pdc_pclk,
-	&dmaca0_hclk,
-	&pico_clk,
-	&pio0_mck,
-	&pio1_mck,
-	&pio2_mck,
-	&pio3_mck,
-	&pio4_mck,
-	&at32_systc0_pclk,
-	&atmel_usart0_usart,
-	&atmel_usart1_usart,
-	&atmel_usart2_usart,
-	&atmel_usart3_usart,
-	&macb0_hclk,
-	&macb0_pclk,
-	&macb1_hclk,
-	&macb1_pclk,
-	&atmel_spi0_spi_clk,
-	&atmel_spi1_spi_clk,
-	&atmel_twi0_pclk,
-	&atmel_mci0_pclk,
-	&atmel_lcdfb0_hck1,
-	&atmel_lcdfb0_pixclk,
-	&ssc0_pclk,
-	&ssc1_pclk,
-	&ssc2_pclk,
-	&usba0_hclk,
-	&usba0_pclk,
-	&atmel_ac97c0_pclk,
-	&abdac0_pclk,
-	&abdac0_sample_clk,
-	&gclk0,
-	&gclk1,
-	&gclk2,
-	&gclk3,
-	&gclk4,
-};
-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
-
-void __init at32_portmux_init(void)
-{
-	at32_init_pio(&pio0_device);
-	at32_init_pio(&pio1_device);
-	at32_init_pio(&pio2_device);
-	at32_init_pio(&pio3_device);
-	at32_init_pio(&pio4_device);
-}
-
-void __init at32_clock_init(void)
-{
-	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
-	int i;
-
-	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
-		main_clock = &pll0;
-		cpu_clk.parent = &pll0;
-	} else {
-		main_clock = &osc0;
-		cpu_clk.parent = &osc0;
-	}
-
-	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
-		pll0.parent = &osc1;
-	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
-		pll1.parent = &osc1;
-
-	genclk_init_parent(&gclk0);
-	genclk_init_parent(&gclk1);
-	genclk_init_parent(&gclk2);
-	genclk_init_parent(&gclk3);
-	genclk_init_parent(&gclk4);
-	genclk_init_parent(&atmel_lcdfb0_pixclk);
-	genclk_init_parent(&abdac0_sample_clk);
-
-	/*
-	 * Turn on all clocks that have at least one user already, and
-	 * turn off everything else. We only do this for module
-	 * clocks, and even though it isn't particularly pretty to
-	 * check the address of the mode function, it should do the
-	 * trick...
-	 */
-	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
-		struct clk *clk = at32_clock_list[i];
-
-		if (clk->users == 0)
-			continue;
-
-		if (clk->mode == &cpu_clk_mode)
-			cpu_mask |= 1 << clk->index;
-		else if (clk->mode == &hsb_clk_mode)
-			hsb_mask |= 1 << clk->index;
-		else if (clk->mode == &pba_clk_mode)
-			pba_mask |= 1 << clk->index;
-		else if (clk->mode == &pbb_clk_mode)
-			pbb_mask |= 1 << clk->index;
-	}
-
-	pm_writel(CPU_MASK, cpu_mask);
-	pm_writel(HSB_MASK, hsb_mask);
-	pm_writel(PBA_MASK, pba_mask);
-	pm_writel(PBB_MASK, pbb_mask);
-}
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
new file mode 100644
index 00000000000..9386e1f82fb
--- /dev/null
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -0,0 +1,1742 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/at32ap700x.h>
+#include <asm/arch/board.h>
+#include <asm/arch/portmux.h>
+
+#include <video/atmel_lcdc.h>
+
+#include "clock.h"
+#include "hmatrix.h"
+#include "pio.h"
+#include "pm.h"
+
+
+#define PBMEM(base)					\
+	{						\
+		.start		= base,			\
+		.end		= base + 0x3ff,		\
+		.flags		= IORESOURCE_MEM,	\
+	}
+#define IRQ(num)					\
+	{						\
+		.start		= num,			\
+		.end		= num,			\
+		.flags		= IORESOURCE_IRQ,	\
+	}
+#define NAMED_IRQ(num, _name)				\
+	{						\
+		.start		= num,			\
+		.end		= num,			\
+		.name		= _name,		\
+		.flags		= IORESOURCE_IRQ,	\
+	}
+
+/* REVISIT these assume *every* device supports DMA, but several
+ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
+ */
+#define DEFINE_DEV(_name, _id)					\
+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+static struct platform_device _name##_id##_device = {		\
+	.name		= #_name,				\
+	.id		= _id,					\
+	.dev		= {					\
+		.dma_mask = &_name##_id##_dma_mask,		\
+		.coherent_dma_mask = DMA_32BIT_MASK,		\
+	},							\
+	.resource	= _name##_id##_resource,		\
+	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+}
+#define DEFINE_DEV_DATA(_name, _id)				\
+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+static struct platform_device _name##_id##_device = {		\
+	.name		= #_name,				\
+	.id		= _id,					\
+	.dev		= {					\
+		.dma_mask = &_name##_id##_dma_mask,		\
+		.platform_data	= &_name##_id##_data,		\
+		.coherent_dma_mask = DMA_32BIT_MASK,		\
+	},							\
+	.resource	= _name##_id##_resource,		\
+	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+}
+
+#define select_peripheral(pin, periph, flags)			\
+	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+
+#define DEV_CLK(_name, devname, bus, _index)			\
+static struct clk devname##_##_name = {				\
+	.name		= #_name,				\
+	.dev		= &devname##_device.dev,		\
+	.parent		= &bus##_clk,				\
+	.mode		= bus##_clk_mode,			\
+	.get_rate	= bus##_clk_get_rate,			\
+	.index		= _index,				\
+}
+
+static DEFINE_SPINLOCK(pm_lock);
+
+unsigned long at32ap7000_osc_rates[3] = {
+	[0] = 32768,
+	/* FIXME: these are ATSTK1002-specific */
+	[1] = 20000000,
+	[2] = 12000000,
+};
+
+static unsigned long osc_get_rate(struct clk *clk)
+{
+	return at32ap7000_osc_rates[clk->index];
+}
+
+static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+{
+	unsigned long div, mul, rate;
+
+	if (!(control & PM_BIT(PLLEN)))
+		return 0;
+
+	div = PM_BFEXT(PLLDIV, control) + 1;
+	mul = PM_BFEXT(PLLMUL, control) + 1;
+
+	rate = clk->parent->get_rate(clk->parent);
+	rate = (rate + div / 2) / div;
+	rate *= mul;
+
+	return rate;
+}
+
+static unsigned long pll0_get_rate(struct clk *clk)
+{
+	u32 control;
+
+	control = pm_readl(PLL0);
+
+	return pll_get_rate(clk, control);
+}
+
+static unsigned long pll1_get_rate(struct clk *clk)
+{
+	u32 control;
+
+	control = pm_readl(PLL1);
+
+	return pll_get_rate(clk, control);
+}
+
+/*
+ * The AT32AP7000 has five primary clock sources: One 32kHz
+ * oscillator, two crystal oscillators and two PLLs.
+ */
+static struct clk osc32k = {
+	.name		= "osc32k",
+	.get_rate	= osc_get_rate,
+	.users		= 1,
+	.index		= 0,
+};
+static struct clk osc0 = {
+	.name		= "osc0",
+	.get_rate	= osc_get_rate,
+	.users		= 1,
+	.index		= 1,
+};
+static struct clk osc1 = {
+	.name		= "osc1",
+	.get_rate	= osc_get_rate,
+	.index		= 2,
+};
+static struct clk pll0 = {
+	.name		= "pll0",
+	.get_rate	= pll0_get_rate,
+	.parent		= &osc0,
+};
+static struct clk pll1 = {
+	.name		= "pll1",
+	.get_rate	= pll1_get_rate,
+	.parent		= &osc0,
+};
+
+/*
+ * The main clock can be either osc0 or pll0.  The boot loader may
+ * have chosen one for us, so we don't really know which one until we
+ * have a look at the SM.
+ */
+static struct clk *main_clock;
+
+/*
+ * Synchronous clocks are generated from the main clock. The clocks
+ * must satisfy the constraint
+ *   fCPU >= fHSB >= fPB
+ * i.e. each clock must not be faster than its parent.
+ */
+static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+{
+	return main_clock->get_rate(main_clock) >> shift;
+};
+
+static void cpu_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(CPU_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(CPU_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long cpu_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(CPUDIV))
+		shift = PM_BFEXT(CPUSEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 control;
+	unsigned long parent_rate, child_div, actual_rate, div;
+
+	parent_rate = clk->parent->get_rate(clk->parent);
+	control = pm_readl(CKSEL);
+
+	if (control & PM_BIT(HSBDIV))
+		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
+	else
+		child_div = 1;
+
+	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
+		actual_rate = parent_rate;
+		control &= ~PM_BIT(CPUDIV);
+	} else {
+		unsigned int cpusel;
+		div = (parent_rate + rate / 2) / rate;
+		if (div > child_div)
+			div = child_div;
+		cpusel = (div > 1) ? (fls(div) - 2) : 0;
+		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
+		actual_rate = parent_rate / (1 << (cpusel + 1));
+	}
+
+	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
+			clk->name, rate, actual_rate);
+
+	if (apply)
+		pm_writel(CKSEL, control);
+
+	return actual_rate;
+}
+
+static void hsb_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(HSB_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(HSB_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long hsb_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(HSBDIV))
+		shift = PM_BFEXT(HSBSEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static void pba_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(PBA_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(PBA_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long pba_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(PBADIV))
+		shift = PM_BFEXT(PBASEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static void pbb_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(PBB_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(PBB_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long pbb_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(PBBDIV))
+		shift = PM_BFEXT(PBBSEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static struct clk cpu_clk = {
+	.name		= "cpu",
+	.get_rate	= cpu_clk_get_rate,
+	.set_rate	= cpu_clk_set_rate,
+	.users		= 1,
+};
+static struct clk hsb_clk = {
+	.name		= "hsb",
+	.parent		= &cpu_clk,
+	.get_rate	= hsb_clk_get_rate,
+};
+static struct clk pba_clk = {
+	.name		= "pba",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 1,
+};
+static struct clk pbb_clk = {
+	.name		= "pbb",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 2,
+};
+
+/* --------------------------------------------------------------------
+ *  Generic Clock operations
+ * -------------------------------------------------------------------- */
+
+static void genclk_mode(struct clk *clk, int enabled)
+{
+	u32 control;
+
+	control = pm_readl(GCCTRL(clk->index));
+	if (enabled)
+		control |= PM_BIT(CEN);
+	else
+		control &= ~PM_BIT(CEN);
+	pm_writel(GCCTRL(clk->index), control);
+}
+
+static unsigned long genclk_get_rate(struct clk *clk)
+{
+	u32 control;
+	unsigned long div = 1;
+
+	control = pm_readl(GCCTRL(clk->index));
+	if (control & PM_BIT(DIVEN))
+		div = 2 * (PM_BFEXT(DIV, control) + 1);
+
+	return clk->parent->get_rate(clk->parent) / div;
+}
+
+static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 control;
+	unsigned long parent_rate, actual_rate, div;
+
+	parent_rate = clk->parent->get_rate(clk->parent);
+	control = pm_readl(GCCTRL(clk->index));
+
+	if (rate > 3 * parent_rate / 4) {
+		actual_rate = parent_rate;
+		control &= ~PM_BIT(DIVEN);
+	} else {
+		div = (parent_rate + rate) / (2 * rate) - 1;
+		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+		actual_rate = parent_rate / (2 * (div + 1));
+	}
+
+	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
+		clk->name, rate, actual_rate);
+
+	if (apply)
+		pm_writel(GCCTRL(clk->index), control);
+
+	return actual_rate;
+}
+
+int genclk_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 control;
+
+	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
+		clk->name, parent->name, clk->parent->name);
+
+	control = pm_readl(GCCTRL(clk->index));
+
+	if (parent == &osc1 || parent == &pll1)
+		control |= PM_BIT(OSCSEL);
+	else if (parent == &osc0 || parent == &pll0)
+		control &= ~PM_BIT(OSCSEL);
+	else
+		return -EINVAL;
+
+	if (parent == &pll0 || parent == &pll1)
+		control |= PM_BIT(PLLSEL);
+	else
+		control &= ~PM_BIT(PLLSEL);
+
+	pm_writel(GCCTRL(clk->index), control);
+	clk->parent = parent;
+
+	return 0;
+}
+
+static void __init genclk_init_parent(struct clk *clk)
+{
+	u32 control;
+	struct clk *parent;
+
+	BUG_ON(clk->index > 7);
+
+	control = pm_readl(GCCTRL(clk->index));
+	if (control & PM_BIT(OSCSEL))
+		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+	else
+		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+
+	clk->parent = parent;
+}
+
+/* --------------------------------------------------------------------
+ *  System peripherals
+ * -------------------------------------------------------------------- */
+static struct resource at32_pm0_resource[] = {
+	{
+		.start	= 0xfff00000,
+		.end	= 0xfff0007f,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(20),
+};
+
+static struct resource at32ap700x_rtc0_resource[] = {
+	{
+		.start	= 0xfff00080,
+		.end	= 0xfff000af,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(21),
+};
+
+static struct resource at32_wdt0_resource[] = {
+	{
+		.start	= 0xfff000b0,
+		.end	= 0xfff000cf,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource at32_eic0_resource[] = {
+	{
+		.start	= 0xfff00100,
+		.end	= 0xfff0013f,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(19),
+};
+
+DEFINE_DEV(at32_pm, 0);
+DEFINE_DEV(at32ap700x_rtc, 0);
+DEFINE_DEV(at32_wdt, 0);
+DEFINE_DEV(at32_eic, 0);
+
+/*
+ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
+ * is always running.
+ */
+static struct clk at32_pm_pclk = {
+	.name		= "pclk",
+	.dev		= &at32_pm0_device.dev,
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 0,
+};
+
+static struct resource intc0_resource[] = {
+	PBMEM(0xfff00400),
+};
+struct platform_device at32_intc0_device = {
+	.name		= "intc",
+	.id		= 0,
+	.resource	= intc0_resource,
+	.num_resources	= ARRAY_SIZE(intc0_resource),
+};
+DEV_CLK(pclk, at32_intc0, pbb, 1);
+
+static struct clk ebi_clk = {
+	.name		= "ebi",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= hsb_clk_get_rate,
+	.users		= 1,
+};
+static struct clk hramc_clk = {
+	.name		= "hramc",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= hsb_clk_get_rate,
+	.users		= 1,
+	.index		= 3,
+};
+
+static struct resource smc0_resource[] = {
+	PBMEM(0xfff03400),
+};
+DEFINE_DEV(smc, 0);
+DEV_CLK(pclk, smc0, pbb, 13);
+DEV_CLK(mck, smc0, hsb, 0);
+
+static struct platform_device pdc_device = {
+	.name		= "pdc",
+	.id		= 0,
+};
+DEV_CLK(hclk, pdc, hsb, 4);
+DEV_CLK(pclk, pdc, pba, 16);
+
+static struct clk pico_clk = {
+	.name		= "pico",
+	.parent		= &cpu_clk,
+	.mode		= cpu_clk_mode,
+	.get_rate	= cpu_clk_get_rate,
+	.users		= 1,
+};
+
+static struct resource dmaca0_resource[] = {
+	{
+		.start	= 0xff200000,
+		.end	= 0xff20ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(2),
+};
+DEFINE_DEV(dmaca, 0);
+DEV_CLK(hclk, dmaca0, hsb, 10);
+
+/* --------------------------------------------------------------------
+ * HMATRIX
+ * -------------------------------------------------------------------- */
+
+static struct clk hmatrix_clk = {
+	.name		= "hmatrix_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 2,
+	.users		= 1,
+};
+#define HMATRIX_BASE	((void __iomem *)0xfff00800)
+
+#define hmatrix_readl(reg)					\
+	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
+#define hmatrix_writel(reg,value)				\
+	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+
+/*
+ * Set bits in the HMATRIX Special Function Register (SFR) used by the
+ * External Bus Interface (EBI). This can be used to enable special
+ * features like CompactFlash support, NAND Flash support, etc. on
+ * certain chipselects.
+ */
+static inline void set_ebi_sfr_bits(u32 mask)
+{
+	u32 sfr;
+
+	clk_enable(&hmatrix_clk);
+	sfr = hmatrix_readl(SFR4);
+	sfr |= mask;
+	hmatrix_writel(SFR4, sfr);
+	clk_disable(&hmatrix_clk);
+}
+
+/* --------------------------------------------------------------------
+ *  System Timer/Counter (TC)
+ * -------------------------------------------------------------------- */
+static struct resource at32_systc0_resource[] = {
+	PBMEM(0xfff00c00),
+	IRQ(22),
+};
+struct platform_device at32_systc0_device = {
+	.name		= "systc",
+	.id		= 0,
+	.resource	= at32_systc0_resource,
+	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
+};
+DEV_CLK(pclk, at32_systc0, pbb, 3);
+
+/* --------------------------------------------------------------------
+ *  PIO
+ * -------------------------------------------------------------------- */
+
+static struct resource pio0_resource[] = {
+	PBMEM(0xffe02800),
+	IRQ(13),
+};
+DEFINE_DEV(pio, 0);
+DEV_CLK(mck, pio0, pba, 10);
+
+static struct resource pio1_resource[] = {
+	PBMEM(0xffe02c00),
+	IRQ(14),
+};
+DEFINE_DEV(pio, 1);
+DEV_CLK(mck, pio1, pba, 11);
+
+static struct resource pio2_resource[] = {
+	PBMEM(0xffe03000),
+	IRQ(15),
+};
+DEFINE_DEV(pio, 2);
+DEV_CLK(mck, pio2, pba, 12);
+
+static struct resource pio3_resource[] = {
+	PBMEM(0xffe03400),
+	IRQ(16),
+};
+DEFINE_DEV(pio, 3);
+DEV_CLK(mck, pio3, pba, 13);
+
+static struct resource pio4_resource[] = {
+	PBMEM(0xffe03800),
+	IRQ(17),
+};
+DEFINE_DEV(pio, 4);
+DEV_CLK(mck, pio4, pba, 14);
+
+void __init at32_add_system_devices(void)
+{
+	platform_device_register(&at32_pm0_device);
+	platform_device_register(&at32_intc0_device);
+	platform_device_register(&at32ap700x_rtc0_device);
+	platform_device_register(&at32_wdt0_device);
+	platform_device_register(&at32_eic0_device);
+	platform_device_register(&smc0_device);
+	platform_device_register(&pdc_device);
+	platform_device_register(&dmaca0_device);
+
+	platform_device_register(&at32_systc0_device);
+
+	platform_device_register(&pio0_device);
+	platform_device_register(&pio1_device);
+	platform_device_register(&pio2_device);
+	platform_device_register(&pio3_device);
+	platform_device_register(&pio4_device);
+}
+
+/* --------------------------------------------------------------------
+ *  USART
+ * -------------------------------------------------------------------- */
+
+static struct atmel_uart_data atmel_usart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart0_resource[] = {
+	PBMEM(0xffe00c00),
+	IRQ(6),
+};
+DEFINE_DEV_DATA(atmel_usart, 0);
+DEV_CLK(usart, atmel_usart0, pba, 3);
+
+static struct atmel_uart_data atmel_usart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart1_resource[] = {
+	PBMEM(0xffe01000),
+	IRQ(7),
+};
+DEFINE_DEV_DATA(atmel_usart, 1);
+DEV_CLK(usart, atmel_usart1, pba, 4);
+
+static struct atmel_uart_data atmel_usart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart2_resource[] = {
+	PBMEM(0xffe01400),
+	IRQ(8),
+};
+DEFINE_DEV_DATA(atmel_usart, 2);
+DEV_CLK(usart, atmel_usart2, pba, 5);
+
+static struct atmel_uart_data atmel_usart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart3_resource[] = {
+	PBMEM(0xffe01800),
+	IRQ(9),
+};
+DEFINE_DEV_DATA(atmel_usart, 3);
+DEV_CLK(usart, atmel_usart3, pba, 6);
+
+static inline void configure_usart0_pins(void)
+{
+	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
+	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
+}
+
+static inline void configure_usart1_pins(void)
+{
+	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
+	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
+}
+
+static inline void configure_usart2_pins(void)
+{
+	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
+	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
+}
+
+static inline void configure_usart3_pins(void)
+{
+	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
+	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
+}
+
+static struct platform_device *__initdata at32_usarts[4];
+
+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
+{
+	struct platform_device *pdev;
+
+	switch (hw_id) {
+	case 0:
+		pdev = &atmel_usart0_device;
+		configure_usart0_pins();
+		break;
+	case 1:
+		pdev = &atmel_usart1_device;
+		configure_usart1_pins();
+		break;
+	case 2:
+		pdev = &atmel_usart2_device;
+		configure_usart2_pins();
+		break;
+	case 3:
+		pdev = &atmel_usart3_device;
+		configure_usart3_pins();
+		break;
+	default:
+		return;
+	}
+
+	if (PXSEG(pdev->resource[0].start) == P4SEG) {
+		/* Addresses in the P4 segment are permanently mapped 1:1 */
+		struct atmel_uart_data *data = pdev->dev.platform_data;
+		data->regs = (void __iomem *)pdev->resource[0].start;
+	}
+
+	pdev->id = line;
+	at32_usarts[line] = pdev;
+}
+
+struct platform_device *__init at32_add_device_usart(unsigned int id)
+{
+	platform_device_register(at32_usarts[id]);
+	return at32_usarts[id];
+}
+
+struct platform_device *atmel_default_console_device;
+
+void __init at32_setup_serial_console(unsigned int usart_id)
+{
+	atmel_default_console_device = at32_usarts[usart_id];
+}
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_CPU_AT32AP7000
+static struct eth_platform_data macb0_data;
+static struct resource macb0_resource[] = {
+	PBMEM(0xfff01800),
+	IRQ(25),
+};
+DEFINE_DEV_DATA(macb, 0);
+DEV_CLK(hclk, macb0, hsb, 8);
+DEV_CLK(pclk, macb0, pbb, 6);
+
+static struct eth_platform_data macb1_data;
+static struct resource macb1_resource[] = {
+	PBMEM(0xfff01c00),
+	IRQ(26),
+};
+DEFINE_DEV_DATA(macb, 1);
+DEV_CLK(hclk, macb1, hsb, 9);
+DEV_CLK(pclk, macb1, pbb, 7);
+
+struct platform_device *__init
+at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &macb0_device;
+
+		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
+		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
+		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
+		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
+		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
+		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
+		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
+		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
+		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
+		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
+
+		if (!data->is_rmii) {
+			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
+			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
+			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
+			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
+			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
+			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
+			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
+			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
+			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
+		}
+		break;
+
+	case 1:
+		pdev = &macb1_device;
+
+		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
+		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
+		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
+		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
+		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
+		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
+		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
+		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
+		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
+		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
+
+		if (!data->is_rmii) {
+			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
+			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
+			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
+			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
+			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
+			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
+			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
+			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
+			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
+		}
+		break;
+
+	default:
+		return NULL;
+	}
+
+	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+	platform_device_register(pdev);
+
+	return pdev;
+}
+#endif
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+static struct resource atmel_spi0_resource[] = {
+	PBMEM(0xffe00000),
+	IRQ(3),
+};
+DEFINE_DEV(atmel_spi, 0);
+DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+
+static struct resource atmel_spi1_resource[] = {
+	PBMEM(0xffe00400),
+	IRQ(4),
+};
+DEFINE_DEV(atmel_spi, 1);
+DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+
+static void __init
+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+		      unsigned int n, const u8 *pins)
+{
+	unsigned int pin, mode;
+
+	for (; n; n--, b++) {
+		b->bus_num = bus_num;
+		if (b->chip_select >= 4)
+			continue;
+		pin = (unsigned)b->controller_data;
+		if (!pin) {
+			pin = pins[b->chip_select];
+			b->controller_data = (void *)pin;
+		}
+		mode = AT32_GPIOF_OUTPUT;
+		if (!(b->mode & SPI_CS_HIGH))
+			mode |= AT32_GPIOF_HIGH;
+		at32_select_gpio(pin, mode);
+	}
+}
+
+struct platform_device *__init
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+{
+	/*
+	 * Manage the chipselects as GPIOs, normally using the same pins
+	 * the SPI controller expects; but boards can use other pins.
+	 */
+	static u8 __initdata spi0_pins[] =
+		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+	static u8 __initdata spi1_pins[] =
+		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_spi0_device;
+		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
+		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
+		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
+		at32_spi_setup_slaves(0, b, n, spi0_pins);
+		break;
+
+	case 1:
+		pdev = &atmel_spi1_device;
+		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
+		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
+		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
+		at32_spi_setup_slaves(1, b, n, spi1_pins);
+		break;
+
+	default:
+		return NULL;
+	}
+
+	spi_register_board_info(b, n);
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  TWI
+ * -------------------------------------------------------------------- */
+static struct resource atmel_twi0_resource[] __initdata = {
+	PBMEM(0xffe00800),
+	IRQ(5),
+};
+static struct clk atmel_twi0_pclk = {
+	.name		= "twi_pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 2,
+};
+
+struct platform_device *__init at32_add_device_twi(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_twi", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, atmel_twi0_resource,
+				ARRAY_SIZE(atmel_twi0_resource)))
+		goto err_add_resources;
+
+	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
+	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
+
+	atmel_twi0_pclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * MMC
+ * -------------------------------------------------------------------- */
+static struct resource atmel_mci0_resource[] __initdata = {
+	PBMEM(0xfff02400),
+	IRQ(28),
+};
+static struct clk atmel_mci0_pclk = {
+	.name		= "mci_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 9,
+};
+
+struct platform_device *__init at32_add_device_mci(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_mci", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, atmel_mci0_resource,
+				ARRAY_SIZE(atmel_mci0_resource)))
+		goto err_add_resources;
+
+	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
+	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
+	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
+	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
+	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
+	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
+
+	atmel_mci0_pclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  LCDC
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
+static struct atmel_lcdfb_info atmel_lcdfb0_data;
+static struct resource atmel_lcdfb0_resource[] = {
+	{
+		.start		= 0xff000000,
+		.end		= 0xff000fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	IRQ(1),
+	{
+		/* Placeholder for pre-allocated fb memory */
+		.start		= 0x00000000,
+		.end		= 0x00000000,
+		.flags		= 0,
+	},
+};
+DEFINE_DEV_DATA(atmel_lcdfb, 0);
+DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+static struct clk atmel_lcdfb0_pixclk = {
+	.name		= "lcdc_clk",
+	.dev		= &atmel_lcdfb0_device.dev,
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 7,
+};
+
+struct platform_device *__init
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+		     unsigned long fbmem_start, unsigned long fbmem_len)
+{
+	struct platform_device *pdev;
+	struct atmel_lcdfb_info *info;
+	struct fb_monspecs *monspecs;
+	struct fb_videomode *modedb;
+	unsigned int modedb_size;
+
+	/*
+	 * Do a deep copy of the fb data, monspecs and modedb. Make
+	 * sure all allocations are done before setting up the
+	 * portmux.
+	 */
+	monspecs = kmemdup(data->default_monspecs,
+			   sizeof(struct fb_monspecs), GFP_KERNEL);
+	if (!monspecs)
+		return NULL;
+
+	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
+	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
+	if (!modedb)
+		goto err_dup_modedb;
+	monspecs->modedb = modedb;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_lcdfb0_device;
+		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
+		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
+		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
+		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
+		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
+		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
+		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
+		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
+		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
+		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
+		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
+		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
+		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
+		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
+		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
+		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
+		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
+		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
+		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
+		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+
+		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+		break;
+
+	default:
+		goto err_invalid_id;
+	}
+
+	if (fbmem_len) {
+		pdev->resource[2].start = fbmem_start;
+		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
+		pdev->resource[2].flags = IORESOURCE_MEM;
+	}
+
+	info = pdev->dev.platform_data;
+	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+	info->default_monspecs = monspecs;
+
+	platform_device_register(pdev);
+	return pdev;
+
+err_invalid_id:
+	kfree(modedb);
+err_dup_modedb:
+	kfree(monspecs);
+	return NULL;
+}
+#endif
+
+/* --------------------------------------------------------------------
+ *  SSC
+ * -------------------------------------------------------------------- */
+static struct resource ssc0_resource[] = {
+	PBMEM(0xffe01c00),
+	IRQ(10),
+};
+DEFINE_DEV(ssc, 0);
+DEV_CLK(pclk, ssc0, pba, 7);
+
+static struct resource ssc1_resource[] = {
+	PBMEM(0xffe02000),
+	IRQ(11),
+};
+DEFINE_DEV(ssc, 1);
+DEV_CLK(pclk, ssc1, pba, 8);
+
+static struct resource ssc2_resource[] = {
+	PBMEM(0xffe02400),
+	IRQ(12),
+};
+DEFINE_DEV(ssc, 2);
+DEV_CLK(pclk, ssc2, pba, 9);
+
+struct platform_device *__init
+at32_add_device_ssc(unsigned int id, unsigned int flags)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &ssc0_device;
+		if (flags & ATMEL_SSC_RF)
+			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
+		if (flags & ATMEL_SSC_RK)
+			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
+		if (flags & ATMEL_SSC_TK)
+			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
+		if (flags & ATMEL_SSC_TF)
+			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
+		if (flags & ATMEL_SSC_TD)
+			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
+		if (flags & ATMEL_SSC_RD)
+			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
+		break;
+	case 1:
+		pdev = &ssc1_device;
+		if (flags & ATMEL_SSC_RF)
+			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
+		if (flags & ATMEL_SSC_RK)
+			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
+		if (flags & ATMEL_SSC_TK)
+			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
+		if (flags & ATMEL_SSC_TF)
+			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
+		if (flags & ATMEL_SSC_TD)
+			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
+		if (flags & ATMEL_SSC_RD)
+			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
+		break;
+	case 2:
+		pdev = &ssc2_device;
+		if (flags & ATMEL_SSC_TD)
+			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
+		if (flags & ATMEL_SSC_RD)
+			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
+		if (flags & ATMEL_SSC_TK)
+			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
+		if (flags & ATMEL_SSC_TF)
+			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
+		if (flags & ATMEL_SSC_RF)
+			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
+		if (flags & ATMEL_SSC_RK)
+			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  USB Device Controller
+ * -------------------------------------------------------------------- */
+static struct resource usba0_resource[] __initdata = {
+	{
+		.start		= 0xff300000,
+		.end		= 0xff3fffff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= 0xfff03000,
+		.end		= 0xfff033ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	IRQ(31),
+};
+static struct clk usba0_pclk = {
+	.name		= "pclk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 12,
+};
+static struct clk usba0_hclk = {
+	.name		= "hclk",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= hsb_clk_get_rate,
+	.index		= 6,
+};
+
+struct platform_device *__init
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_usba_udc", 0);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, usba0_resource,
+					  ARRAY_SIZE(usba0_resource)))
+		goto out_free_pdev;
+
+	if (data) {
+		if (platform_device_add_data(pdev, data, sizeof(*data)))
+			goto out_free_pdev;
+
+		if (data->vbus_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->vbus_pin, 0);
+	}
+
+	usba0_pclk.dev = &pdev->dev;
+	usba0_hclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+
+	return pdev;
+
+out_free_pdev:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * IDE / CompactFlash
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
+static struct resource at32_smc_cs4_resource[] __initdata = {
+	{
+		.start	= 0x04000000,
+		.end	= 0x07ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(~0UL), /* Magic IRQ will be overridden */
+};
+static struct resource at32_smc_cs5_resource[] __initdata = {
+	{
+		.start	= 0x20000000,
+		.end	= 0x23ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(~0UL), /* Magic IRQ will be overridden */
+};
+
+static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+		unsigned int cs, unsigned int extint)
+{
+	static unsigned int extint_pin_map[4] __initdata = {
+		GPIO_PIN_PB(25),
+		GPIO_PIN_PB(26),
+		GPIO_PIN_PB(27),
+		GPIO_PIN_PB(28),
+	};
+	static bool common_pins_initialized __initdata = false;
+	unsigned int extint_pin;
+	int ret;
+
+	if (extint >= ARRAY_SIZE(extint_pin_map))
+		return -EINVAL;
+	extint_pin = extint_pin_map[extint];
+
+	switch (cs) {
+	case 4:
+		ret = platform_device_add_resources(pdev,
+				at32_smc_cs4_resource,
+				ARRAY_SIZE(at32_smc_cs4_resource));
+		if (ret)
+			return ret;
+
+		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
+		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+		break;
+	case 5:
+		ret = platform_device_add_resources(pdev,
+				at32_smc_cs5_resource,
+				ARRAY_SIZE(at32_smc_cs5_resource));
+		if (ret)
+			return ret;
+
+		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
+		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (!common_pins_initialized) {
+		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
+		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
+		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
+		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
+		common_pins_initialized = true;
+	}
+
+	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+
+	pdev->resource[1].start = EIM_IRQ_BASE + extint;
+	pdev->resource[1].end = pdev->resource[1].start;
+
+	return 0;
+}
+
+struct platform_device *__init
+at32_add_device_ide(unsigned int id, unsigned int extint,
+		    struct ide_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc("at32_ide", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct ide_platform_data)))
+		goto fail;
+
+	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+		goto fail;
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+struct platform_device *__init
+at32_add_device_cf(unsigned int id, unsigned int extint,
+		    struct cf_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc("at32_cf", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct cf_platform_data)))
+		goto fail;
+
+	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+		goto fail;
+
+	if (data->detect_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
+	if (data->reset_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->reset_pin, 0);
+	if (data->vcc_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->vcc_pin, 0);
+	/* READY is used as extint, so we can't select it as gpio */
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+#endif
+
+/* --------------------------------------------------------------------
+ * AC97C
+ * -------------------------------------------------------------------- */
+static struct resource atmel_ac97c0_resource[] __initdata = {
+	PBMEM(0xfff02800),
+	IRQ(29),
+};
+static struct clk atmel_ac97c0_pclk = {
+	.name		= "pclk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 10,
+};
+
+struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_ac97c", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
+				ARRAY_SIZE(atmel_ac97c0_resource)))
+		goto err_add_resources;
+
+	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
+	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
+	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
+	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
+
+	atmel_ac97c0_pclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * ABDAC
+ * -------------------------------------------------------------------- */
+static struct resource abdac0_resource[] __initdata = {
+	PBMEM(0xfff02000),
+	IRQ(27),
+};
+static struct clk abdac0_pclk = {
+	.name		= "pclk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 8,
+};
+static struct clk abdac0_sample_clk = {
+	.name		= "sample_clk",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 6,
+};
+
+struct platform_device *__init at32_add_device_abdac(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("abdac", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, abdac0_resource,
+				ARRAY_SIZE(abdac0_resource)))
+		goto err_add_resources;
+
+	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
+	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
+	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
+	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
+
+	abdac0_pclk.dev = &pdev->dev;
+	abdac0_sample_clk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  GCLK
+ * -------------------------------------------------------------------- */
+static struct clk gclk0 = {
+	.name		= "gclk0",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 0,
+};
+static struct clk gclk1 = {
+	.name		= "gclk1",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 1,
+};
+static struct clk gclk2 = {
+	.name		= "gclk2",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 2,
+};
+static struct clk gclk3 = {
+	.name		= "gclk3",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 3,
+};
+static struct clk gclk4 = {
+	.name		= "gclk4",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 4,
+};
+
+struct clk *at32_clock_list[] = {
+	&osc32k,
+	&osc0,
+	&osc1,
+	&pll0,
+	&pll1,
+	&cpu_clk,
+	&hsb_clk,
+	&pba_clk,
+	&pbb_clk,
+	&at32_pm_pclk,
+	&at32_intc0_pclk,
+	&hmatrix_clk,
+	&ebi_clk,
+	&hramc_clk,
+	&smc0_pclk,
+	&smc0_mck,
+	&pdc_hclk,
+	&pdc_pclk,
+	&dmaca0_hclk,
+	&pico_clk,
+	&pio0_mck,
+	&pio1_mck,
+	&pio2_mck,
+	&pio3_mck,
+	&pio4_mck,
+	&at32_systc0_pclk,
+	&atmel_usart0_usart,
+	&atmel_usart1_usart,
+	&atmel_usart2_usart,
+	&atmel_usart3_usart,
+#if defined(CONFIG_CPU_AT32AP7000)
+	&macb0_hclk,
+	&macb0_pclk,
+	&macb1_hclk,
+	&macb1_pclk,
+#endif
+	&atmel_spi0_spi_clk,
+	&atmel_spi1_spi_clk,
+	&atmel_twi0_pclk,
+	&atmel_mci0_pclk,
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
+	&atmel_lcdfb0_hck1,
+	&atmel_lcdfb0_pixclk,
+#endif
+	&ssc0_pclk,
+	&ssc1_pclk,
+	&ssc2_pclk,
+	&usba0_hclk,
+	&usba0_pclk,
+	&atmel_ac97c0_pclk,
+	&abdac0_pclk,
+	&abdac0_sample_clk,
+	&gclk0,
+	&gclk1,
+	&gclk2,
+	&gclk3,
+	&gclk4,
+};
+unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+
+void __init at32_portmux_init(void)
+{
+	at32_init_pio(&pio0_device);
+	at32_init_pio(&pio1_device);
+	at32_init_pio(&pio2_device);
+	at32_init_pio(&pio3_device);
+	at32_init_pio(&pio4_device);
+}
+
+void __init at32_clock_init(void)
+{
+	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+	int i;
+
+	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+		main_clock = &pll0;
+		cpu_clk.parent = &pll0;
+	} else {
+		main_clock = &osc0;
+		cpu_clk.parent = &osc0;
+	}
+
+	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+		pll0.parent = &osc1;
+	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+		pll1.parent = &osc1;
+
+	genclk_init_parent(&gclk0);
+	genclk_init_parent(&gclk1);
+	genclk_init_parent(&gclk2);
+	genclk_init_parent(&gclk3);
+	genclk_init_parent(&gclk4);
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
+	genclk_init_parent(&atmel_lcdfb0_pixclk);
+#endif
+	genclk_init_parent(&abdac0_sample_clk);
+
+	/*
+	 * Turn on all clocks that have at least one user already, and
+	 * turn off everything else. We only do this for module
+	 * clocks, and even though it isn't particularly pretty to
+	 * check the address of the mode function, it should do the
+	 * trick...
+	 */
+	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+		struct clk *clk = at32_clock_list[i];
+
+		if (clk->users == 0)
+			continue;
+
+		if (clk->mode == &cpu_clk_mode)
+			cpu_mask |= 1 << clk->index;
+		else if (clk->mode == &hsb_clk_mode)
+			hsb_mask |= 1 << clk->index;
+		else if (clk->mode == &pba_clk_mode)
+			pba_mask |= 1 << clk->index;
+		else if (clk->mode == &pbb_clk_mode)
+			pbb_mask |= 1 << clk->index;
+	}
+
+	pm_writel(CPU_MASK, cpu_mask);
+	pm_writel(HSB_MASK, hsb_mask);
+	pm_writel(PBA_MASK, pba_mask);
+	pm_writel(PBB_MASK, pbb_mask);
+}
-- 
cgit