From 574ec547c7771881e18e4e76ca970e323bcdc774 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 23 Jun 2009 13:26:23 +0200 Subject: ARM: add support for the EET board, based on the i.MX31 pcm037 module The "EET" variant of the pcm037 board has an OLED display, using a S6E63D6 display controller on the first SPI interface, using GPIO57 as a chip-select for it. S6E63D6 is initialised in the boot-loader, so we only have to take care of the LCD. EET also adds several buttons and LEDs on GPIOs. This patch adds a "pcm037_variant=" kernel command line parameter to specify at boot-time which board the kernel is running on, default is "pcm970", specify "eet" for the EET board. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/mach-mx3/Kconfig') diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 17a21a291e2..851f2458bf6 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -36,6 +36,14 @@ config MACH_PCM037 Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM037_EET + bool "Support pcm037 EET board extensions" + depends on MACH_PCM037 + help + Add support for PCM037 EET baseboard extensions. If you are using the + OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel + command-line parameter. + config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 -- cgit