From 8eccbb6fb97a5b54a9db166399f0d24f33114522 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 8 May 2007 17:21:59 +0200 Subject: hwmon/smsc47m1: Add support for the LPC47M292 The new SMSC LPC47M292 Super-I/O chip is a bit different from the previous ones, it supports a 3rd fan, but unfortunately the pin configuration registers are different. Signed-off-by: Jean Delvare --- Documentation/hwmon/smsc47m1 | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'Documentation/hwmon/smsc47m1') diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1 index 04a11124f66..42c8431b3c9 100644 --- a/Documentation/hwmon/smsc47m1 +++ b/Documentation/hwmon/smsc47m1 @@ -14,6 +14,10 @@ Supported chips: http://www.smsc.com/main/datasheets/47m14x.pdf http://www.smsc.com/main/tools/discontinued/47m15x.pdf http://www.smsc.com/main/datasheets/47m192.pdf + * SMSC LPC47M292 + Addresses scanned: none, address read from Super I/O config space + Prefix: 'smsc47m2' + Datasheet: Not public * SMSC LPC47M997 Addresses scanned: none, address read from Super I/O config space Prefix: 'smsc47m1' @@ -32,9 +36,10 @@ Description The Standard Microsystems Corporation (SMSC) 47M1xx Super I/O chips contain monitoring and PWM control circuitry for two fans. -The 47M15x and 47M192 chips contain a full 'hardware monitoring block' -in addition to the fan monitoring and control. The hardware monitoring -block is not supported by the driver. +The LPC47M15x, LPC47M192 and LPC47M292 chips contain a full 'hardware +monitoring block' in addition to the fan monitoring and control. The +hardware monitoring block is not supported by this driver, use the +smsc47m192 driver for that. No documentation is available for the 47M997, but it has the same device ID as the 47M15x and 47M192 chips and seems to be compatible. -- cgit