From add77c64ca8b00dae5dc0a6be9eb89f1514d21ea Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sun, 8 Jul 2007 22:43:00 +0200 Subject: hwmon: add support for THMC50 and ADM1022 This patch adds support for THMC50 and ADM1022 hardware monitoring chips. Signed-off-by: Krzysztof Helt Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/thmc50 | 74 ++++++++ drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/thmc50.c | 440 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 525 insertions(+) create mode 100644 Documentation/hwmon/thmc50 create mode 100644 drivers/hwmon/thmc50.c diff --git a/Documentation/hwmon/thmc50 b/Documentation/hwmon/thmc50 new file mode 100644 index 00000000000..9639ca93d55 --- /dev/null +++ b/Documentation/hwmon/thmc50 @@ -0,0 +1,74 @@ +Kernel driver thmc50 +===================== + +Supported chips: + * Analog Devices ADM1022 + Prefix: 'adm1022' + Addresses scanned: I2C 0x2c - 0x2e + Datasheet: http://www.analog.com/en/prod/0,2877,ADM1022,00.html + * Texas Instruments THMC50 + Prefix: 'thmc50' + Addresses scanned: I2C 0x2c - 0x2e + Datasheet: http://focus.ti.com/docs/prod/folders/print/thmc50.html + +Author: Krzysztof Helt + +This driver was derived from the 2.4 kernel thmc50.c source file. + +Credits: + thmc50.c (2.4 kernel): + Frodo Looijaard + Philip Edelbrock + +Module Parameters +----------------- + +* adm1022_temp3: short array + List of adapter,address pairs to force chips into ADM1022 mode with + second remote temperature. This does not work for original THMC50 chips. + +Description +----------- + +The THMC50 implements: an internal temperature sensor, support for an +external diode-type temperature sensor (compatible w/ the diode sensor inside +many processors), and a controllable fan/analog_out DAC. For the temperature +sensors, limits can be set through the appropriate Overtemperature Shutdown +register and Hysteresis register. Each value can be set and read to half-degree +accuracy. An alarm is issued (usually to a connected LM78) when the +temperature gets higher then the Overtemperature Shutdown value; it stays on +until the temperature falls below the Hysteresis value. All temperatures are in +degrees Celsius, and are guaranteed within a range of -55 to +125 degrees. + +The THMC50 only updates its values each 1.5 seconds; reading it more often +will do no harm, but will return 'old' values. + +The THMC50 is usually used in combination with LM78-like chips, to measure +the temperature of the processor(s). + +The ADM1022 works the same as THMC50 but it is faster (5 Hz instead of +1 Hz for THMC50). It can be also put in a new mode to handle additional +remote temperature sensor. The driver use the mode set by BIOS by default. + +In case the BIOS is broken and the mode is set incorrectly, you can force +the mode with additional remote temperature with adm1022_temp3 parameter. +A typical symptom of wrong setting is a fan forced to full speed. + +Driver Features +--------------- + +The driver provides up to three temperatures: + +temp1 -- internal +temp2 -- remote +temp3 -- 2nd remote only for ADM1022 + +pwm1 -- fan speed (0 = stop, 255 = full) +pwm1_mode -- always 0 (DC mode) + +The value of 0 for pwm1 also forces FAN_OFF signal from the chip, +so it stops fans even if the value 0 into the ANALOG_OUT register does not. + +The driver was tested on Compaq AP550 with two ADM1022 chips (one works +in the temp3 mode), five temperature readings and two fans. + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index dbdca6f10e4..192953b29b2 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -520,6 +520,16 @@ config SENSORS_SMSC47B397 This driver can also be built as a module. If so, the module will be called smsc47b397. +config SENSORS_THMC50 + tristate "Texas Instruments THMC50 / Analog Devices ADM1022" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Texas Instruments THMC50 + sensor chips and clones: the Analog Devices ADM1022. + + This driver can also be built as a module. If so, the module + will be called thmc50. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 59f81fae40a..d04f90031eb 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o +obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c new file mode 100644 index 00000000000..9395b52d9b9 --- /dev/null +++ b/drivers/hwmon/thmc50.c @@ -0,0 +1,440 @@ +/* + thmc50.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 2007 Krzysztof Helt + Based on 2.4 driver by Frodo Looijaard and + Philip Edelbrock + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_LICENSE("GPL"); + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_2(thmc50, adm1022); +I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs " + "to enable 3rd temperature (ADM1022 only)"); + +/* Many THMC50 constants specified below */ + +/* The THMC50 registers */ +#define THMC50_REG_CONF 0x40 +#define THMC50_REG_COMPANY_ID 0x3E +#define THMC50_REG_DIE_CODE 0x3F +#define THMC50_REG_ANALOG_OUT 0x19 + +const static u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 }; +const static u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C }; +const static u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B }; + +#define THMC50_REG_CONF_nFANOFF 0x20 + +/* Each client has this additional data */ +struct thmc50_data { + struct i2c_client client; + struct class_device *class_dev; + + struct mutex update_lock; + enum chips type; + unsigned long last_updated; /* In jiffies */ + char has_temp3; /* !=0 if it is ADM1022 in temp3 mode */ + char valid; /* !=0 if following fields are valid */ + + /* Register values */ + s8 temp_input[3]; + s8 temp_max[3]; + s8 temp_min[3]; + u8 analog_out; +}; + +static int thmc50_attach_adapter(struct i2c_adapter *adapter); +static int thmc50_detach_client(struct i2c_client *client); +static void thmc50_init_client(struct i2c_client *client); +static struct thmc50_data *thmc50_update_device(struct device *dev); + +static struct i2c_driver thmc50_driver = { + .driver = { + .name = "thmc50", + }, + .attach_adapter = thmc50_attach_adapter, + .detach_client = thmc50_detach_client, +}; + +static ssize_t show_analog_out(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thmc50_data *data = thmc50_update_device(dev); + return sprintf(buf, "%d\n", data->analog_out); +} + +static ssize_t set_analog_out(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct thmc50_data *data = i2c_get_clientdata(client); + int tmp = simple_strtoul(buf, NULL, 10); + int config; + + mutex_lock(&data->update_lock); + data->analog_out = SENSORS_LIMIT(tmp, 0, 255); + i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT, + data->analog_out); + + config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); + if (data->analog_out == 0) + config &= ~THMC50_REG_CONF_nFANOFF; + else + config |= THMC50_REG_CONF_nFANOFF; + i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config); + + mutex_unlock(&data->update_lock); + return count; +} + +/* There is only one PWM mode = DC */ +static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "0\n"); +} + +/* Temperatures */ +static ssize_t show_temp(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct thmc50_data *data = thmc50_update_device(dev); + return sprintf(buf, "%d\n", data->temp_input[nr] * 1000); +} + +static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct thmc50_data *data = thmc50_update_device(dev); + return sprintf(buf, "%d\n", data->temp_min[nr] * 1000); +} + +static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct thmc50_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->temp_min[nr] = SENSORS_LIMIT(val / 1000, -128, 127); + i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr], + data->temp_min[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct thmc50_data *data = thmc50_update_device(dev); + return sprintf(buf, "%d\n", data->temp_max[nr] * 1000); +} + +static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct thmc50_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->temp_max[nr] = SENSORS_LIMIT(val / 1000, -128, 127); + i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr], + data->temp_max[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +#define temp_reg(offset) \ +static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \ + NULL, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_temp_min, set_temp_min, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp_max, set_temp_max, offset - 1); + +temp_reg(1); +temp_reg(2); +temp_reg(3); + +static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_analog_out, + set_analog_out, 0); +static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0); + +static struct attribute *thmc50_attributes[] = { + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_mode.dev_attr.attr, + NULL +}; + +static const struct attribute_group thmc50_group = { + .attrs = thmc50_attributes, +}; + +/* for ADM1022 3rd temperature mode */ +static struct attribute *adm1022_attributes[] = { + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group adm1022_group = { + .attrs = adm1022_attributes, +}; + +static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind) +{ + unsigned company; + unsigned revision; + unsigned config; + struct i2c_client *client; + struct thmc50_data *data; + struct device *dev; + int err = 0; + const char *type_name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + pr_debug("thmc50: detect failed, " + "smbus byte data not supported!\n"); + goto exit; + } + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access thmc50 registers. */ + if (!(data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL))) { + pr_debug("thmc50: detect failed, kzalloc failed!\n"); + err = -ENOMEM; + goto exit; + } + + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &thmc50_driver; + dev = &client->dev; + + pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n", + client->addr, i2c_adapter_id(client->adapter)); + + /* Now, we do the remaining detection. */ + company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID); + revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE); + config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); + + if (kind == 0) + kind = thmc50; + else if (kind < 0) { + err = -ENODEV; + if (revision >= 0xc0 && ((config & 0x10) == 0)) { + if (company == 0x49) { + kind = thmc50; + err = 0; + } else if (company == 0x41) { + kind = adm1022; + err = 0; + } + } + } + if (err == -ENODEV) { + pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n"); + goto exit_free; + } + pr_debug("thmc50: Detected %s (version %x, revision %x)\n", + type_name, (revision >> 4) - 0xc, revision & 0xf); + data->type = kind; + + if (kind == thmc50) + type_name = "thmc50"; + else if (kind == adm1022) { + int id = i2c_adapter_id(client->adapter); + int i; + + type_name = "adm1022"; + data->has_temp3 = (config >> 7) & 1; /* config MSB */ + for (i = 0; i + 1 < adm1022_temp3_num; i += 2) + if (adm1022_temp3[i] == id && + adm1022_temp3[i + 1] == address) { + /* enable 2nd remote temp */ + data->has_temp3 = 1; + break; + } + } + + /* Fill in the remaining client fields & put it into the global list */ + strlcpy(client->name, type_name, I2C_NAME_SIZE); + mutex_init(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(client))) + goto exit_free; + + thmc50_init_client(client); + + /* Register sysfs hooks */ + if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group))) + goto exit_detach; + + /* Register ADM1022 sysfs hooks */ + if (data->type == adm1022) + if ((err = sysfs_create_group(&client->dev.kobj, + &adm1022_group))) + goto exit_remove_sysfs_thmc50; + + /* Register a new directory entry with module sensors */ + data->class_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->class_dev)) { + err = PTR_ERR(data->class_dev); + goto exit_remove_sysfs; + } + + return 0; + +exit_remove_sysfs: + if (data->type == adm1022) + sysfs_remove_group(&client->dev.kobj, &adm1022_group); +exit_remove_sysfs_thmc50: + sysfs_remove_group(&client->dev.kobj, &thmc50_group); +exit_detach: + i2c_detach_client(client); +exit_free: + kfree(data); +exit: + return err; +} + +static int thmc50_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_probe(adapter, &addr_data, thmc50_detect); +} + +static int thmc50_detach_client(struct i2c_client *client) +{ + struct thmc50_data *data = i2c_get_clientdata(client); + int err; + + hwmon_device_unregister(data->class_dev); + sysfs_remove_group(&client->dev.kobj, &thmc50_group); + if (data->type == adm1022) + sysfs_remove_group(&client->dev.kobj, &adm1022_group); + + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); + + return 0; +} + +static void thmc50_init_client(struct i2c_client *client) +{ + struct thmc50_data *data = i2c_get_clientdata(client); + int config; + + data->analog_out = i2c_smbus_read_byte_data(client, + THMC50_REG_ANALOG_OUT); + /* set up to at least 1 */ + if (data->analog_out == 0) { + data->analog_out = 1; + i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT, + data->analog_out); + } + config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); + config |= 0x1; /* start the chip if it is in standby mode */ + if (data->has_temp3) + config |= 0x80; /* enable 2nd remote temp */ + i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config); +} + +static struct thmc50_data *thmc50_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct thmc50_data *data = i2c_get_clientdata(client); + int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + timeout) + || !data->valid) { + + int temps = data->has_temp3 ? 3 : 2; + int i; + for (i = 0; i < temps; i++) { + data->temp_input[i] = i2c_smbus_read_byte_data(client, + THMC50_REG_TEMP[i]); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + THMC50_REG_TEMP_MAX[i]); + data->temp_min[i] = i2c_smbus_read_byte_data(client, + THMC50_REG_TEMP_MIN[i]); + } + data->analog_out = + i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT); + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init sm_thmc50_init(void) +{ + return i2c_add_driver(&thmc50_driver); +} + +static void __exit sm_thmc50_exit(void) +{ + i2c_del_driver(&thmc50_driver); +} + +MODULE_AUTHOR("Krzysztof Helt "); +MODULE_DESCRIPTION("THMC50 driver"); + +module_init(sm_thmc50_init); +module_exit(sm_thmc50_exit); -- cgit