From 493b7127aa56d0a5c041797639bf543d96f6261b Mon Sep 17 00:00:00 2001 From: David Wong Date: Mon, 18 May 2009 05:25:49 -0300 Subject: V4L/DVB (11880): cx23885: support for card Mygica X8506 DMB-TH This patch add cx23885 support for card "Mygica X8506 DMB-TH". It should work on "Magic-Pro ProHDTV Extreme" as well, as they are same hardware with different branding. Sign-off-by: David T.L. Wong Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/video/cx23885/cx23885-cards.c | 22 ++++++++++++++++++ drivers/media/video/cx23885/cx23885-dvb.c | 35 ++++++++++++++++++++++++++++- drivers/media/video/cx23885/cx23885.h | 1 + 4 files changed, 58 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 948e436108b..450b8f8c389 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -20,3 +20,4 @@ 19 -> Hauppauge WinTV-HVR1275 [0070:2215] 20 -> Hauppauge WinTV-HVR1255 [0070:2251] 21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295] + 22 -> Mygica X8506 DMB-TH [14f1:8651] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 057ef36d5a6..ce29b5e34a1 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -197,6 +197,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1210", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_MYGICA_X8506] = { + .name = "Mygica X8506 DMB-TH", + .portb = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -316,6 +320,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x2295, .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8651, + .card = CX23885_BOARD_MYGICA_X8506, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -706,6 +714,15 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(20); cx23885_gpio_set(dev, GPIO_9); break; + case CX23885_BOARD_MYGICA_X8506: + /* GPIO-1 reset XC5000 */ + /* GPIO-2 reset LGS8GL5 */ + cx_set(GP0_IO, 0x00060000); + cx_clear(GP0_IO, 0x00000006); + mdelay(100); + cx_set(GP0_IO, 0x00060006); + mdelay(100); + break; } } @@ -809,6 +826,11 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_MYGICA_X8506: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 45784a38430..e236df23370 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -49,6 +49,7 @@ #include "lnbh24.h" #include "cx24116.h" #include "cimax2.h" +#include "lgs8gxx.h" #include "netup-eeprom.h" #include "netup-init.h" #include "lgdt3305.h" @@ -420,10 +421,29 @@ static struct cx24116_config dvbworld_cx24116_config = { .demod_address = 0x05, }; +static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = { + .prod = LGS8GXX_PROD_LGS8GL5, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 5380, /* 5.38 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 0, + .if_neg_edge = 0, +}; + +static struct xc5000_config mygica_x8506_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 5380, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; - struct cx23885_i2c *i2c_bus = NULL; + struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL; struct videobuf_dvb_frontend *fe0; int ret; @@ -745,6 +765,19 @@ static int dvb_register(struct cx23885_tsport *port) break; } break; + case CX23885_BOARD_MYGICA_X8506: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &mygica_x8506_lgs8gl5_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &mygica_x8506_xc5000_config); + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 5067c19b659..1a2ac518a3f 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -75,6 +75,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1275 19 #define CX23885_BOARD_HAUPPAUGE_HVR1255 20 #define CX23885_BOARD_HAUPPAUGE_HVR1210 21 +#define CX23885_BOARD_MYGICA_X8506 22 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- cgit