summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* [NETLINK]: Fix unicast timeoutsPatrick McHardy2007-11-071-1/+1
| | | | | | | | | | | | | Commit ed6dcf4a in the history.git tree broke netlink_unicast timeouts by moving the schedule_timeout() call to a new function that doesn't propagate the remaining timeout back to the caller. This means on each retry we start with the full timeout again. ipc/mqueue.c seems to actually want to wait indefinitely so this behaviour is retained. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [INET]: Remove per bucket rwlock in tcp/dccp ehash table.Eric Dumazet2007-11-071-6/+65
| | | | | | | | | | | | | | | | | | | | | | | | As done two years ago on IP route cache table (commit 22c047ccbc68fa8f3fa57f0e8f906479a062c426) , we can avoid using one lock per hash bucket for the huge TCP/DCCP hash tables. On a typical x86_64 platform, this saves about 2MB or 4MB of ram, for litle performance differences. (we hit a different cache line for the rwlock, but then the bucket cache line have a better sharing factor among cpus, since we dirty it less often). For netstat or ss commands that want a full scan of hash table, we perform fewer memory accesses. Using a 'small' table of hashed rwlocks should be more than enough to provide correct SMP concurrency between different buckets, without using too much memory. Sizing of this table depends on num_possible_cpus() and various CONFIG settings. This patch provides some locking abstraction that may ease a future work using a different model for TCP/DCCP table. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPVS]: Synchronize closing of ConnectionsRumen G. Bogdanovski2007-11-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch makes the master daemon to sync the connection when it is about to close. This makes the connections on the backup to close or timeout according their state. Before the sync was performed only if the connection is in ESTABLISHED state which always made the connections to timeout in the hard coded 3 minutes. However the Andy Gospodarek's patch ([IPVS]: use proper timeout instead of fixed value) effectively did nothing more than increasing this to 15 minutes (Established state timeout). So this patch makes use of proper timeout since it syncs the connections on status changes to FIN_WAIT (2min timeout) and CLOSE (10sec timeout). However if the backup misses CLOSE hopefully it did not miss FIN_WAIT. Otherwise we will just have to wait for the ESTABLISHED state timeout. As it is without this patch. This way the number of the hanging connections on the backup is kept to minimum. And very few of them will be left to timeout with a long timeout. This is important if we want to make use of the fix for the real server overcommit on master/backup fail-over. Signed-off-by: Rumen G. Bogdanovski <rumen@voicecho.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPVS]: Bind connections on stanby if the destination existsRumen G. Bogdanovski2007-11-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the problem with node overload on director fail-over. Given the scenario: 2 nodes each accepting 3 connections at a time and 2 directors, director failover occurs when the nodes are fully loaded (6 connections to the cluster) in this case the new director will assign another 6 connections to the cluster, If the same real servers exist there. The problem turned to be in not binding the inherited connections to the real servers (destinations) on the backup director. Therefore: "ipvsadm -l" reports 0 connections: root@test2:~# ipvsadm -l IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP test2.local:5999 wlc -> node473.local:5999 Route 1000 0 0 -> node484.local:5999 Route 1000 0 0 while "ipvs -lnc" is right root@test2:~# ipvsadm -lnc IPVS connection entries pro expire state source virtual destination TCP 14:56 ESTABLISHED 192.168.0.10:39164 192.168.0.222:5999 192.168.0.51:5999 TCP 14:59 ESTABLISHED 192.168.0.10:39165 192.168.0.222:5999 192.168.0.52:5999 So the patch I am sending fixes the problem by binding the received connections to the appropriate service on the backup director, if it exists, else the connection will be handled the old way. So if the master and the backup directors are synchronized in terms of real services there will be no problem with server over-committing since new connections will not be created on the nonexistent real services on the backup. However if the service is created later on the backup, the binding will be performed when the next connection update is received. With this patch the inherited connections will show as inactive on the backup: root@test2:~# ipvsadm -l IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP test2.local:5999 wlc -> node473.local:5999 Route 1000 0 1 -> node484.local:5999 Route 1000 0 1 rumen@test2:~$ cat /proc/net/ip_vs IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP C0A800DE:176F wlc -> C0A80033:176F Route 1000 0 1 -> C0A80032:176F Route 1000 0 1 Regards, Rumen Bogdanovski Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Rumen G. Bogdanovski <rumen@voicecho.com> Signed-off-by: Simon Horman <horms@verge.net.au>
* [TTY]: Fix network driver interactions with TCGET/SET calls.Alan Cox2007-11-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Dave Miller noted various cases where line disciplines for things like ppp go poking around in termios themselves in ways that broke with the new termios code. Rather than have them all learning about termios internals provide proper methods for this - tty_mode_ioctl() This handles all the terminal mode handling for speed/carrier etc and none of the methods are ldisc dependant so they can be called by any user - tty_perform_flush() This extracts the flush functionality and enables pppd the ppp layer to share it cleanly. The existing n_tty_ioctl code is refactored in this patch to provide the new functions and to call them itself appropriately. This patch has no (intended) behaviour changes and simply prepares for the other fixes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV4]: Compact some ifdefs in the fib code.Pavel Emelyanov2007-11-071-9/+6
| | | | | | | | | | | There are places that check for CONFIG_IP_MULTIPLE_TABLES twice in the same file, but the internals of these #ifdefs can be merged. As a side effect - remove one ifdef from inside a function. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Kill proc_net_create()David S. Miller2007-11-071-3/+0
| | | | | | There are no more users. Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Define infrastructure to keep 'inuse' changes in an efficent SMP/NUMA ↵Eric Dumazet2007-11-071-6/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | way. "struct proto" currently uses an array stats[NR_CPUS] to track change on 'inuse' sockets per protocol. If NR_CPUS is big, this means we use a big memory area for this. Moreover, all this memory area is located on a single node on NUMA machines, increasing memory pressure on the boot node. In this patch, I tried to : - Keep a fast !CONFIG_SMP implementation - Keep a fast CONFIG_SMP implementation for often used protocols (tcp,udp,raw,...) - Introduce a NUMA efficient implementation Some helper macros are defined in include/net/sock.h These macros take into account CONFIG_SMP If a "struct proto" is declared without using DEFINE_PROTO_INUSE / REF_PROTO_INUSE macros, it will automatically use a default implementation, using a dynamically allocated percpu zone. This default implementation will be NUMA efficient, but might use 32/64 bytes per possible cpu because of current alloc_percpu() implementation. However it still should be better than previous implementation based on stats[NR_CPUS] field. When a "struct proto" is changed to use the new macros, we use a single static "int" percpu variable, lowering the memory and cpu costs, still preserving NUMA efficiency. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV4]: Clean the ip_sockglue.c from some ugly ifdefsPavel Emelyanov2007-11-071-0/+12
| | | | | | | | | | | The #idfed CONFIG_IP_MROUTE is sometimes places inside the if-s, which looks completely bad. Similar ifdefs inside the functions looks a bit better, but they are also not recommended to be used. Provide an ifdef-ed ip_mroute_opt() helper to cleanup the code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: Sort matches/targets in Kbuild fileJan Engelhardt2007-11-073-24/+24
| | | | | | | | Sort matches and targets in the Kbuild file. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2007-11-052-0/+12
|\ | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: handle broken cable reporting pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect ata_piix: Add additional PCI identifier for 40 wire short cable pata_serverworks: Fix problem with some drive combinations libata: Don't disable dipm with SET FEATURES libata and bogus LBA48 drives
| * libata: handle broken cable reportingAlan Cox2007-11-052-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | One or two ancient drives predated the cable spec and didn't sent the valid bits for the field. I had hoped to leave this out of libata as a piece of historical annoyance but a recent CD drive shows the same bug so we have to import support for it. Same concept as Bartlomiej's changes old IDE except that as we have centralised blacklists we can avoid keeping another private table of stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * libata and bogus LBA48 drivesGeert Uytterhoeven2007-11-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | A colleague noticed recent versions of Ubuntu no longer detect his 80 GB ST380020ACE drive. This drive is special in that it advertises LBA48 support, but has the lba_capacity_2 field set to zero (cfr. http://lkml.org/lkml/2004/3/30/163). Upon closer look, libata indeed doesn't seem to handle this case yet. Below is an (untested) fix. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | m68knommu: fix pread/pwrite definesGreg Ungerer2007-11-051-2/+2
| | | | | | | | | | | | | | | | | | | | Fix system call defines for system call 180 and 181 to match the underlying system call table function entries. System call 180 calls sys_pread64, and 181 calls sys_pwrite64, so make the definitions match. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | arm26: remove it againHugh Dickins2007-11-051-1/+0
| | | | | | | | | | | | | | | | | | | | A tiny vestige of arm26 has appeared: remove it again. (akpm: someone (tm) needs to remove include/asm-arm26/ too) Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Missing include file in kallsyms.hKamalesh Babulal2007-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Build with randconfig fails with following error with the 2.6.24-rc4-git9 include/linux/kallsyms.h:56: error: `NULL' undeclared (first use in this function) include/linux/kallsyms.h:56: error: (Each undeclared identifier is reported only once include/linux/kallsyms.h:56: error: for each function it appears in.) make[2]: *** [arch/powerpc/platforms/cell/spu_callbacks.o] Error 1 make[1]: *** [arch/powerpc/platforms/cell] Error 2 make: *** [arch/powerpc/platforms] Error 2 Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2007-11-052-6/+13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Add Kconfig option to disable deprecated pci_find_* API PCI: pciserial_resume_one ignored return value of pci_enable_device PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() check PCI: make pci_match_device() static PCI: Remove 3 incorrect MSI quirks. PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set. PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge. PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips"
| * | PCI: Add Kconfig option to disable deprecated pci_find_* APIJeff Garzik2007-11-051-0/+3
| | | | | | | | | | | | | | | | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: make pci_match_device() staticAdrian Bunk2007-11-051-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | pci_match_device() no longer has any other users. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: Remove 3 incorrect MSI quirks.David Miller2007-11-051-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have dealt with the real issue, in that some ATI SATA and USB controllers needed the INTX_DISABLE quirk, we can remove these AMD chipset global MSI disabling quirks. This reverts three changesets: 4be8f906435a6af241821ab5b94b2b12cb7d57d8 (PCI: disable MSI on RS690) aea6a433f50cd89b9cbd10850fd0b32f961f9883 (PCI: disable MSI on RD580) f122392f679ebed39db08074f935d770504623eb (PCI: disable MSI on RX790) This is based upon testing and feedback from Shane Huang <Shane.Huang@amd.com>. Cc: Shane Huang <Shane.Huang@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set.David Miller2007-11-051-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A reasonably common problem with some devices is that they will disable MSI generation when the INTX_DISABLE bit is set in the PCI_COMMAND register. Quirk this explicitly, guarding the pci_intx() calls in msi.c with this quirk indication. The first entries for this quirk are for 5714 and 5780 Tigon3 chips, and thus we can remove the workaround code from the tg3.c driver. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge.David Miller2007-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the fix for the following problem: https://bugzilla.redhat.com/show_bug.cgi?id=227657 The bnx2 device 5706 complains about MSI not working behind a ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem: e3008dedff4bdc96a5f67224cd3d8d12237082a0: "PCI: disable MSI by default on systems with Serverworks HT1000 chips" was not entirely correct, and has been reverted. MSI does not work on the PCIX bus because the BIOS did not set the HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the bridge. We use the existing quirk_msi_ht_cap() to detect the problem and disable MSI in all buses behind it. Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Anantha Subramanyam <ananth@broadcom.com> Cc: Naren Sankar <nsankar@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 ↵David Miller2007-11-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | chips" This reverts commit e3008dedff4bdc96a5f67224cd3d8d12237082a0. The real bug was an INTX issue in the tg3 ethernet chip, and cured by commit c129d962a66c76964954a98b38586ada82cf9381 Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | ide: move ide_fixstring() documentation to ide-iops.c from ide.hBartlomiej Zolnierkiewicz2007-11-051-8/+1
|/ / | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | Merge branch 'master' of ↵Linus Torvalds2007-11-052-7/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: lguest: tidy up documentation kernel/futex.c: make 3 functions static unexport access_process_vm lguest: make async_hcall() static
| * | kernel/futex.c: make 3 functions staticAdrian Bunk2007-11-051-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following functions can now become static again: - get_futex_key() - get_futex_key_refs() - drop_futex_key_refs() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | lguest: make async_hcall() staticAdrian Bunk2007-11-051-3/+0
| |/ | | | | | | | | | | | | async_hcall() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* / cpm_load_patch() - declartion conflictKamalesh Babulal2007-11-051-1/+1
|/ | | | | | | | | Commit f2a0bd3753dad7ea4605ebd5435716b39e9f92bb defines the function with "void cpm_load_patch(cpm8xx_t *cp)" prtotype and is declared as "extern void cpm_load_patch(volatile immap_t *immr)" in the header file. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* SCSI: add asynchronous event notification APIJeff Garzik2007-11-031-0/+25
| | | | | | | Originally based on a patch by Kristen Carlson Accardi @ Intel. Copious input from James Bottomley. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2007-11-031-0/+1
|\ | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: [BLOCK] Don't allow empty barriers to be passed down to queues that don't grok them dm: bounce_pfn limit added Deadline iosched: Fix batching fairness Deadline iosched: Reset batch for ordered requests Deadline iosched: Factor out finding latter reques
| * dm: bounce_pfn limit addedVasily Averin2007-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device mapper uses its own bounce_pfn that may differ from one on underlying device. In that way dm can build incorrect requests that contain sg elements greater than underlying device is able to handle. This is the cause of slab corruption in i2o layer, occurred on i386 arch when very long direct IO requests are addressed to dm-over-i2o device. Signed-off-by: Vasily Averin <vvs@sw.ru> Cc: <stable@kernel.org> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | Merge branch 'sg' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2007-11-034-34/+32
|\ \ | | | | | | | | | | | | | | | | | | * 'sg' of git://git.kernel.dk/linux-2.6-block: [SG] Get rid of __sg_mark_end() cleanup asm/scatterlist.h includes SG: Make sg_init_one() use general table init functions
| * | [SG] Get rid of __sg_mark_end()Jens Axboe2007-11-021-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sg_mark_end() overwrites the page_link information, but all users want __sg_mark_end() behaviour where we just set the end bit. That is the most natural way to use the sg list, since you'll fill it in and then mark the end point. So change sg_mark_end() to only set the termination bit. Add a sg_magic debug check as well, and clear a chain pointer if it is set. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | cleanup asm/scatterlist.h includesAdrian Bunk2007-11-023-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not architecture specific code should not #include <asm/scatterlist.h>. This patch therefore either replaces them with #include <linux/scatterlist.h> or simply removes them if they were unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | SG: Make sg_init_one() use general table init functionsJens Axboe2007-11-021-22/+18
| |/ | | | | | | | | | | Don't open code sg_init_one(), make it reuse sg_init_table(). Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | Merge branch 'v2.6.24-rc1-lockdep' of ↵Linus Torvalds2007-11-032-0/+41
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: lockdep: fix a typo in the __lock_acquire comment sched: fix unconditional irq lock lockdep: fixup irq tracing
| * | lockdep: fixup irq tracingPeter Zijlstra2007-10-252-0/+41
| | | | | | | | | | | | | | | | | | | | | Ensure we fixup the IRQ state before we hit any locking code. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6Linus Torvalds2007-11-033-11/+12
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Update defconfigs. sh64: fix dma_cache_sync() compilation sh64: Move DMA macros from pci.h to scatterlist.h.
| * | | sh64: fix dma_cache_sync() compilationAdrian Bunk2007-10-301-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following compile error caused by commit 622a9edd919de98ef59571ae6c40c7458244e3f2: <-- snip --> ... CC init/main.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/dma-mapping.h:52, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/dmaengine.h:29, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/skbuff.h:29, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/netlink.h:155, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/genetlink.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/net/genetlink.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/taskstats_kern.h:12, from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:46: include2/asm/dma-mapping.h: In function 'dma_cache_sync': include2/asm/dma-mapping.h:46: error: invalid operands to binary & (have 'void *' and 'int') make[2]: *** [init/main.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | sh64: Move DMA macros from pci.h to scatterlist.h.Robert P. J. Day2007-10-302-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to be more consistent with other architectures, move two DMA-related scatterlist macros from pci.h to scatterlist.h. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2007-11-036-6/+18
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (24 commits) sh: Update r7785rp defconfig. sh: mach-type updates. sh: Fix up r7780rp highlander CF access size. sh: Terminate .eh_frame in VDSO with a 4-byte 0. sh: Correct SUBARCH matching. sh: Decouple 4k and soft/hardirq stacks. sh: Fix optimized __copy_user() movca.l usage. sh: Clean up SR.RB Kconfig mess. sh: Kill off dead ipr_irq_demux(). sh: Make SH7750 oprofile compile again. sh: Provide a __read_mostly section wrapper. sh: linker script tidying. sh: Move zero page param defs somewhere sensible. sh: Use generic SMP_CACHE_BYTES/L1_CACHE_ALIGN. sh: Kill off legacy embedded ramdisk section. sh: Fix up early mem cmdline parsing. sh: Enable USBF on MS7722SE. sh: Add resource of USBF for SH7722. maple: Fix maple bus compiler warning sh: fix zImage build with >=binutils-2.18 ...
| * | | | sh: Decouple 4k and soft/hardirq stacks.Paul Mundt2007-11-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While using separate IRQ stacks can cut down on stack consumption, many users can also use 4k stacks directly without the additional need of separate stacks for soft and hardirqs. With this split, we support the same rationale for 4KSTACKS as m68knommu, with the IRQSTACKS abstraction as per ppc64. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | sh: Provide a __read_mostly section wrapper.Paul Mundt2007-10-301-0/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | sh: Move zero page param defs somewhere sensible.Paul Mundt2007-10-301-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Follows s390 and others. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | sh: Use generic SMP_CACHE_BYTES/L1_CACHE_ALIGN.Paul Mundt2007-10-302-4/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | sh: Correct pte_page() breakage.Paul Mundt2007-10-302-2/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As noted by David: pte_page() is a macro defined as follows; include/asm-sh/pgtable.h #define pte_page(x) phys_to_page(pte_val(x)&PTE_PHYS_MASK) include/asm-sh/page.h #define phys_to_page(phys) (pfn_to_page(phys >> PAGE_SHIFT)) So as you can see the phys_to_page() macro doesn't wrap the 'phys' parameter in parentheses so we end up with; pte_val(x)&PTE_PHYS_MASK >> PAGE_SHIFT Which is not what we wanted as '>>' has a higher precedence than bitwise AND. I dug into the git repository and I believe this bug was added with this commit (104b8deaa5c0144cccfc7d914413ff80c7176af1); 2006-03-27 KAMEZAWA Hiroyuki [PATCH] unify pfn_to_page: sh pfn_to_page -#define phys_to_page(phys) (mem_map + (((phys)-__MEMORY_START) >> PAGE_SHIFT)) -#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + __MEMORY_START) +#define phys_to_page(phys) (pfn_to_page(phys >> PAGE_SHIFT)) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) Reported-by: David ADDISON <david.addison@st.com> Reported-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | | libata: increase 128 KB / cmd limit for ATAPI tape drivesTony Battersby2007-11-031-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are limited in the amount of data that they can transfer by the max_sectors value. The max_sectors value is currently calculated according to the command set for disk drives, which doesn't apply to tape drives. The default max_sectors value of 256 limits ATAPI tape drive commands to 128 KB. This patch against 2.6.24-rc1 increases the max_sectors value for tape drives to 65535, which permits tape drive commands to transfer just under 32 MB. Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V SATA tape drive. Note that some of the chipset drivers also set their own max_sectors value, which may override the value set in libata-core. I don't have any of these chipsets to test, so I didn't go messing with them. Also, ATAPI devices other than tape drives may benefit from similar changes, but I have only tape drives and disk drives to test. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | Use i8253.c lock for PC speaker on MIPS, too.Ralf Baechle2007-11-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Jazz machines have to use the PIT timer for dyntick and highresolution kernels. This may break because currently just like i386 used to do MIPS uses two separate spinlocks in the actual PIT code and the PC speaker code. So switch to do it the same that x86 currently does PIT locking. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2007-11-021-0/+3
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: linux-input mailing list moved to vger.kernel.org Input: inport, logibm - use KERN_INFO when reporting missing mouse Input: appletouch - idle reset logic broke older Fountains Input: hp_sdc.c - fix section mismatch Input: appletouch - add Johannes Berg as maintainer Input: Add Euro and Dollar key codes Input: xpad - add more USB IDs
| * | | | Input: Add Euro and Dollar key codesCarlos Corbacho2007-10-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most newer Acer laptops (from 2005 onwards) now ship with an extra Dollar and Euro key either side of the 'Up' arrow. These cannot be mapped in the traditional way, since they are not combination keys. Signed-off-by: Carlos Corbacho <cathectic@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit (git 2.34.1) at 2024-09-20 13:29:44 +0000