summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* ide: add "initializing" argument to ide_register_hw()Bartlomiej Zolnierkiewicz2007-05-101-2/+3
| | | | | | | | | Add "initializing" argument to ide_register_hw() and use it instead of ide.c wide variable of the same name. Update all users of ide_register_hw() accordingly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: cable detection fixes (take 2)Bartlomiej Zolnierkiewicz2007-05-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Tejun's recent eighty_ninty_three() fix has inspired me to do more thorough review of the cable detection code... * print user-friendly warning about limiting the maximum transfer speed to UDMA33 (and the reason behind it) when 80-wire cable is not detected, also while at it cleanup eighty_ninty_three() a bit * use eighty_ninty_three() in ide_ata66_check(), this actually fixes 3 bugs: - bit 14 (word 93 validity check) == 1 && bit 13 (80-wire cable test) == 1 were used as 80-wire cable present test for CONFIG_IDEDMA_IVB=n case (please see FIXME comment in eighty_ninty_three() for more details) - CONFIG_IDEDMA_IVB=y/n cases were interchanged - check for SATA devices was missing * remove private cable warnings from pdc_202xx{old,new} drivers now that core code provides this functionality (plus, in pdc202xx_new case the test could give false warnings for ATAPI devices because pdc202xx_new driver doesn't even support ATAPI DMA) Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: move IDE settings handling to ide-proc.cBartlomiej Zolnierkiewicz2007-05-101-16/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * move __ide_add_setting() ide_add_setting() __ide_remove_setting() auto_remove_settings() ide_find_setting_by_name() ide_read_setting() ide_write_setting() set_xfer_rate() ide_add_generic_settings() ide_register_subdriver() ide_unregister_subdriver() from ide.c to ide-proc.c * set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it * rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(), update device drivers to use new names * add CONFIG_IDE_PROC_FS=n versions of ide_proc_[un]register_driver() and ide_add_generic_settings() * make ide_find_setting_by_name(), ide_{read,write}_setting() and ide_{add,remove}_proc_entries() static * cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef, also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc * remove bogus comment from ide.h * cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t Besides saner code this patch results in the IDE core smaller by ~2 kB (on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS=n. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: split off ioctl handling from IDE settings (v2)Bartlomiej Zolnierkiewicz2007-05-101-12/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | * do write permission and min/max checks in ide_procset_t functions * ide-disk.c: drive->id is always available so cleanup "multcount" setting accordingly * ide-disk.c: "address" setting was incorrectly defined as type TYPE_INTA, fix it by using type TYPE_BYTE and updating ide_drive_t->adressing field, the bug didn't trigger because this IDE setting uses custom ->set function * ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl * ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl * handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl() instead of using IDE settings to deal with them * remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl fields from ide_settings_t, also remove now unused TYPE_INTA handling v2: * add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: make /proc/ide/ optionalBartlomiej Zolnierkiewicz2007-05-101-6/+8
| | | | | | | | | | | | | All important information/features should be already available through sysfs and ioctl interfaces. Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option, disabling it makes IDE driver ~5 kB smaller (on x86-32). While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}() and remove no longer needed #ifdefs. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_tune_dma() helperBartlomiej Zolnierkiewicz2007-05-101-0/+2
| | | | | | | | | | After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: rework the code for selecting the best DMA transfer mode (v3)Bartlomiej Zolnierkiewicz2007-05-101-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix UDMA/MWDMA/SWDMA masks (v3)Bartlomiej Zolnierkiewicz2007-05-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | * use 0x00 instead of 0x80 to disable ->{ultra,mwdma,swdma}_mask * add udma_mask field to ide_pci_device_t and use it to initialize ->ultra_mask in aec62xx, cmd64x, pdc202xx_{new,old} and piix drivers * fix UDMA masks to match with chipset specific *_ratemask() (alim15x3, hpt366, serverworks and siimage drivers need UDMA mask filtering method - done in the next patch) v2: * piix: fix cable detection for 82801AA_1 and 82372FB_1 [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] * cmd64x: use hwif->cds->udma_mask [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] * aec62xx: fix newly introduced bug - check DMA status not command register [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * piix: use hwif->cds->udma_mask [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* m68k: <asm/scatterlist.h> needs <linux/types.h>Geert Uytterhoeven2007-05-081-0/+2
| | | | | | | | | | The recent <linux/pci.h> cleanup uncovered that include/asm-m68k/scatterlist.h needs to include <linux/types.h> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* FRV: Miscellaneous fixesDavid Howells2007-05-081-3/+13
| | | | | | | | | | | | | | | | | Miscellaneous fixes to bring FRV up to date: (1) Copy the new syscall numbers from i386 to asm-frv/unistd.h and fill out the syscall table in entry.S too. (2) Mark __frv_uart0 and __frv_uart1 __pminitdata rather than __initdata so that determine_clocks() can access them when CONFIG_PM=y. (3) Make arch/frv/mm/elf-fdpic.c include asm/mman.h so that MAP_FIXED is available (fixes commit 2fd3bebaad9da3b3b99c46a3389099424bf7ee35). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2007-05-085-157/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Optimize fault kprobe handling just like powerpc. [SPARC]: Wire up utimensat syscall. [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. [SPARC64]: Kill asm-sparc64/pbm.h [ATYFB]: Fix sparc includes. [QLA2XXX]: Fix build on sparc. [SPARC64]: Removal of trivial pci_controller_info uses. [SPARC64]: Move index info pci_pbm_info. [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info. [SPARC64]: Move pci_ops into pci_pbm_info. [SPARC64] SBUS: Error interrupt registry cleanups. [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX. [SPARC64] PCI: Use common routine to fetch PBM properties.
| * [SPARC64]: Optimize fault kprobe handling just like powerpc.David S. Miller2007-05-082-3/+14
| | | | | | | | | | | | And eliminate DIE_GPF while we're at it. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC]: Wire up utimensat syscall.David S. Miller2007-05-082-2/+4
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Kill asm-sparc64/pbm.hDavid S. Miller2007-05-081-132/+0
| | | | | | | | | | | | Everything it contains can be hidden in pci_impl.h Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Move index info pci_pbm_info.David S. Miller2007-05-081-5/+1
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.David S. Miller2007-05-081-7/+3
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Move pci_ops into pci_pbm_info.David S. Miller2007-05-081-3/+1
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info'sDavid S. Miller2007-05-081-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The idea is to move more and more things into the pbm, with the eventual goal of eliminating the pci_controller_info entirely as there really isn't any need for it. This stage of the transformations requires some reworking of the PCI error interrupt handling. It might be tricky to get rid of the pci_controller_info parenting for a few reasons: 1) When we get an uncorrectable or correctable error we want to interrogate the IOMMU and streaming cache of both PBMs for error status. These errors come from the UPA front-end which is shared between the two PBM PCI bus segments. Historically speaking this is why I choose the datastructure hierarchy of pci_controller_info-->pci_pbm_info 2) The probing does a portid/devhandle match to look for the 'other' pbm, but this is entirely an artifact and can be eliminated trivially. What we could do to solve #1 is to have a "buddy" pointer from one pbm to another. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.David S. Miller2007-05-081-6/+0
| | | | | | | | | | | | They are totally unused. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64] PCI: Use common routine to fetch PBM properties.David S. Miller2007-05-081-2/+0
| | | | | | | | | | | | | | | | | | | | Namely bus-range and ino-bitmap. This allows us also to eliminate pci_controller_info's pci_{first,last}_busno fields as only the pbm ones are used now. Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2007-05-081-2/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits) [SCSI] zfcp: clear boxed flag on unit reopen. [SCSI] zfcp: clear adapter failed flag if an fsf request times out. [SCSI] zfcp: rework request ID management. [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI [SCSI] zfcp: Locking for req_no and req_seq_no [SCSI] zfcp: print S_ID and D_ID with 3 bytes [SCSI] ipr: Use PCI-E reset API for new ipr adapter [SCSI] qla2xxx: Update version number to 8.01.07-k7. [SCSI] qla2xxx: Add MSI support. [SCSI] qla2xxx: Correct pci_set_msi() usage semantics. [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed. [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings. [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization. [SCSI] zfcp: Stop system after memory corruption [SCSI] mesh: cleanup variable usage in interrupt handler [SCSI] megaraid: replace yield() with cond_resched() [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n [SCSI] aacraid: correct SUN products to README [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers [SCSI] aacraid: kexec fix (reset interrupt handler) ...
| * | [SCSI] sas_scsi_host: Convert to use the kthread APIChristoph Hellwig2007-05-061-2/+1
| | | | | | | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | | disable socket power in adapter driver instead of media oneAlex Dubov2007-05-081-0/+1
| |/ |/| | | | | | | | | | | | | | | Socket power must be fully controlled by adapter driver. This also prevents unnecessary power-off of the socket when media driver is unloaded, yet media remains in the socket. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2007-05-082-1/+22
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits) Use menuconfig objects - hwmon hwmon/smsc47b397: Use dynamic sysfs callbacks hwmon/smsc47b397: Convert to a platform driver hwmon/w83781d: Deprecate W83627HF support hwmon/w83781d: Use dynamic sysfs callbacks hwmon/w83781d: Be less i2c_client-centric hwmon/w83781d: Clean up conversion macros hwmon/w83781d: No longer use i2c-isa hwmon/ams: Do not print error on systems without apple motion sensor hwmon/ams: Fix I2C read retry logic hwmon: New AD7416, AD7417 and AD7418 driver hwmon/coretemp: Add documentation hwmon: New coretemp driver i386: Use functions from library in msr driver i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu hwmon/lm75: Use dynamic sysfs callbacks hwmon/lm78: Use dynamic sysfs callbacks hwmon/lm78: Be less i2c_client-centric hwmon/lm78: No longer use i2c-isa hwmon: New max6650 driver ...
| * | i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpuRudolf Marek2007-05-082-1/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add safe (exception handled) variants of rdmsr_on_cpu and wrmsr_on_cpu. You should use these when the target MSR may not actually exist, as doing so could trigger an exception which the regular functions do not handle. The safe variants are slower, though. The upcoming coretemp hardware monitoring driver will need this. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | Merge branch 'reset-seq' of ↵Linus Torvalds2007-05-081-25/+15
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'reset-seq' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata reset-seq] build and merge fixes libata: reimplement reset sequencing libata: improve ata_std_prereset() libata: improve 0xff status handling libata: add deadline support to prereset and reset methods
| * | | libata: reimplement reset sequencingTejun Heo2007-05-011-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata previously depended upon waits in prereset to get resets after hotplug right for both spin up and device ready wait. This was necessary both for reliablity and speed as reset was likely to fail if initiated too early and each try usually took more than 30secs to fail. Previous patches fixed the reliability part by fixing status and SCR handling in resets. This patch remedies the speed part by improving reset sequencing. Prereset waiting timeout is adjusted to 10s because spinup wait is replaced by reset sequencing and !BSY wait is not as important as before. During boot or module loading where the drive is already fully spun up, !BSY wait succeeds immediately, so 10s should be enough in most cases. It matters after hotplugging or other error conditions, but in those cases, !BSY wait in prereset simply can't be relied upon due to the varied and weird behaviors ATA controllers and devices show. Reset is now driven by ata_eh_reset_timeouts[] table which contains timeouts for each reset try. The first reset can be softreset but the following ones are always hardreset if available. Each timeout defines deadline for the reset try. If a reset try fails, reset is retried with the next timeout till the end of the timeout table is reached. If a reset try fails before the timeout with error, libata waits till the deadline of the failed try before retrying. IOW, the timeout table defines timetable of reset tries such that the n'th try always begins at least after the sum of all previous timeouts has passed. The current timetable defines 4 tries and takes around 1 minute. @0 : First try. This should succeed most of the time during boot. @10 : 10s is enough to spin up most consumer harddrives. Give it another shot. @20 : 20s should spin up > 99% of working drives. This has 30s timeout for retarded devices needing long idleness post reset. @55 : Final try with 5s timeout just in case. The above timetable is trade off between not annoying the device too much with frequent resets and taking reasonable amount of time in most cases. Some controllers may do better with shorter timeouts while others may fare better with longer but we just can't rely upon LLD writers to test each controller with wide variety of devices using various scenarios. We need default behavior which reasonably fits most cases. I've tested the above timetable on a dozen SATA controllers and a few PATA controllers with about a dozen different drives from all major vendors and 4 different ODDs from three different vendors for both boot and hotplug (if available) cases. Boot probing is not affected unless the device is broken in which cases new code gives up on the port after a minute rather than five or nine minutes. When hotplugging, most devices get detected on the first or second try. Multi-platter drives with long spin up time which sometimes took > 40 secs with the original code, now usually comes up during the second try and at least right after the third try @20. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | libata: add deadline support to prereset and reset methodsTejun Heo2007-05-011-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-05-081-0/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) [netdrvr] atl1: fix build pasemi_mac: Use local-mac-address instead of mac-address if available pasemi_mac: PHY support pasemi_mac: Add msglevel support and "debug" module param pasemi_mac: Logic cleanup / rx performance improvements pasemi_mac: Minor cleanup / define fixes pasemi_mac: Add SKB reuse / copy-break pasemi_mac: Timer and interrupt fixes pasemi_mac: Abstract and fix up interrupt restart routines pasemi_mac: Move the IRQ mapping from the PCI layer to the driver tc35815: Remove unnecessary skb->dev assignment drivers/net/dm9000: Convert to generic boolean AT91RM9200 Ethernet: Fix multicast addressing AT91RM9200 Ethernet: Support additional PHYs PCMCIA-NETDEV : xirc2ps_cs: bugfix of multicast code sky2: re-enable 88E8056 for most motherboards MIPS: Drop unnecessary CONFIG_ISA from RBTX49XX ne: MIPS: Use platform_driver for ne on RBTX49XX ne: Add NEEDS_PORTLIST to control ISA auto-probe ne: Misc fixes for platform driver. ... Fix conflict in drivers/net/pasemi_mac.c (get_property() got renamed to of_get_property()) manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | s390: free skbs in finite amount of time in qethUrsula Braun2007-05-081-0/+1
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Free sent skbs in some finite amount of time. Affected are asynchronous queue of Hipersockets devices and the output queues of all eth-devices respectively. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds2007-05-081-0/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: Input: move USB miscellaneous devices under drivers/input/misc Input: move USB mice under drivers/input/mouse Input: move USB gamepads under drivers/input/joystick Input: move USB touchscreens under drivers/input/touchscreen Input: move USB tablets under drivers/input/tablet Input: i8042 - fix AUX port detection with some chips Input: aaed2000_kbd - convert to use polldev library Input: drivers/usb/input - usb_buffer_free() cleanup Input: synaptics - don't complain about failed resets Input: pull input.h into uinpit.h Input: drivers/usb/input - fix sparse warnings (signedness) Input: evdev - fix some sparse warnings (signedness, shadowing) Input: drivers/joystick - fix various sparse warnings Input: force feedback - make sure effect is present before playing
| * | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov2007-05-08474-3437/+30651
| |\| | |
| * | | | Input: pull input.h into uinpit.hMike Frysinger2007-05-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | uinput.h relies on structures found in input.h, so pull in the header Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* | | | | Merge branch 'master' of ↵Linus Torvalds2007-05-0828-702/+1783
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits) [POWERPC] Abolish powerpc_flash_init() [POWERPC] Early serial debug support for PPC44x [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc [POWERPC] Add device tree for Ebony [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now [POWERPC] MPIC U3/U4 MSI backend [POWERPC] MPIC MSI allocator [POWERPC] Enable MSI mappings for MPIC [POWERPC] Tell Phyp we support MSI [POWERPC] RTAS MSI implementation [POWERPC] PowerPC MSI infrastructure [POWERPC] Rip out the existing powerpc msi stubs [POWERPC] Remove use of 4level-fixup.h for ppc32 [POWERPC] Add powerpc PCI-E reset API implementation [POWERPC] Holly bootwrapper [POWERPC] Holly DTS [POWERPC] Holly defconfig [POWERPC] Add support for 750CL Holly board [POWERPC] Generalize tsi108 PCI setup [POWERPC] Generalize tsi108 PHY types ... Fixed conflict in include/asm-powerpc/kdebug.h manually Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | [POWERPC] Early serial debug support for PPC44xDavid Gibson2007-05-082-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] MPIC MSI allocatorMichael Ellerman2007-05-081-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support MSI on MPIC we need a way to reserve and allocate hardware irq numbers, this patch implements an allocator for that purpose. New firmware platforms must define a "msi-available-ranges" property on their MPIC node for MSI to work. For U3/U4 we do a best-guess setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] PowerPC MSI infrastructureMichael Ellerman2007-05-081-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This provides the architecture specific hooks to support MSI on powerpc. We implement the newly added arch_setup_msi_irqs() and arch_teardown_msi_irqs(), and then delegate to ppc_md routines. Platforms that don't implement MSI will leave the ppc_md calls blank, arch_msi_check_device() will detect this and return ENOSYS. Drivers should detect this error and continue to use LSI. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] Rip out the existing powerpc msi stubsMichael Ellerman2007-05-081-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rip out the existing powerpc msi stubs. These were the start of an implementation based on ppc_md calls, but were never used in mainline. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] Remove use of 4level-fixup.h for ppc32David Gibson2007-05-083-34/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 32-bit systems, powerpc still relies on the 4level-fixup.h hack, to pretend that the generic pagetable handling stuff is 3-levels rather than 4. This patch removes this, instead using the newer pgtable-nopmd.h to handle the elision of both the pud and pmd pagetable levels (ppc32 pagetables are actually 2 levels). This removes a little extraneous code, and makes it more easily compared to the 64-bit pagetable code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | Merge branch 'linux-2.6'Paul Mackerras2007-05-08478-3467/+30736
| |\ \ \ \ \ | | | |/ / / | | |/| | |
| * | | | | [POWERPC] Generalize tsi108 PCI setupJosh Boyer2007-05-082-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generalize tsi108_setup_pci to take the config space physical address and primary bus designator as a parameter. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] Generalize tsi108 PHY typesJosh Boyer2007-05-081-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a phy_type field to the tsi108 ethernet structures to indicate which PHY is used on a board. This is derived from the "compatible" property in the ethernet-phy node of the device tree. The default remains the MV88E PHY. Also, convert the setup code to use of_get_mac_address instead of hard coding a lookup for the "address" property in the ethernet node. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] Add tsi108_pci.h for common PCI functionsJosh Boyer2007-05-081-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a header file for the common PCI routines used for the TSI bridge Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] via-pmu: remove LED sleep notifierJohannes Berg2007-05-081-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The generic LED code now makes sure that suspended devices don't blink, so we no longer need to do it ourselves. For the suspend to disk case, however, we need to make sure that we don't blink if the PMU sysdev was suspended before the LED device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] mpc52xx suspend to deep-sleepDomen Puncer2007-05-071-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement deep-sleep on MPC52xx. SDRAM is put into self-refresh with help of SRAM code (alternatives would be code in FLASH, I-cache). Interrupt code must also not be in SDRAM, so put it in I-cache. MPC52xx core is static, so contents will remain intact even with clocks turned off. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] Export of_device_get_modaliasSylvain Munaut2007-05-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apparently other parts of the kernel need to know the modalias internally (like the sysfs code in macintosh driver). To avoid consistency issues, we export this code and use it everywhere it's needed rather than repeat it ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] Kill off the PTE_FMT macroDavid Gibson2007-05-072-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 32-bit powerpc uses a PTE_FMT macro to handle printk() formatting of PTE entries (which can vary in type and size). Apparently there was a good reason for it once, but with current compilers it's simpler just to workaround the variation with a cast in the printk() itself (there's only one use). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] powermac: Suspend to disk on G5Johannes Berg2007-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Powermac G5 suspend to disk implementation. The code is platform agnostic but only tested on powermac, no other 64-bit powerpc machines. Because nvidiafb still breaks suspend I have marked it EXPERIMENTAL on powermac and because I can't test it and some lowlevel code will need changes it is BROKEN on all other 64-bit platforms. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] DART iommu suspendJohannes Berg2007-05-072-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements save and restore hooks for IOMMUs and implements it the DART iommu. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | | | [POWERPC] powermac: Support G5 CPU hotplugJohannes Berg2007-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows "hotplugging" of CPUs on G5 machines. CPUs that are disabled are put into an idle loop with the decrementer frequency set to minimum. To wake them up again we kick them just like when bringing them up. To stop those CPUs from messing with any global state we stop them from entering the timer interrupt. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit (git 2.34.1) at 2024-09-20 03:59:56 +0000