summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* USB: avoid needless address-taking of function parametersHarvey Harrison2009-01-074-13/+13
| | | | | | | | | | There's no need to take the address of the function params or local variables when the direct value byteswapping routines are available. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: protect hcd.h from multiple inclusionsAnton Vorontsov2009-01-071-0/+4
| | | | | | | | | | This will let us use this header in other header files. Will be needed for the FHCI USB Host driver. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb host: Oxford OXU210HP HCD driver.Rodolfo Giometti2009-01-074-0/+4446
| | | | | | | | | | This driver implements the support for Oxford OXU210HP USB high-speed host, no peripheral nor OTG. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: Kan Liu <kan.k.liu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Avoid 20ms delay in EHCI resumeVikram Pandita2009-01-071-3/+15
| | | | | | | | | | | | | | | For function ehci_bus_resume() - Added flag resume_needed No need to wait for 20ms if no port was suspended - Change mdelay to msleep - release and reacquire the spinlock around mdelay Signed-off-by: vikram pandita <vikram.pandita@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: use pci_ioremap_bar() in drivers/usbArjan van de Ven2009-01-071-6/+6
| | | | | | | | | | | Use the newly introduced pci_ioremap_bar() function in drivers/usb. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: clean up redundant tests on unsignedroel kluin2009-01-072-8/+2
| | | | | | | | | temp, bytes and param->{length,sglen,vary} are unsigned so these tests do nothing. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: unusual_devs.h additions for Macpower MasterBoxSergey Ovcharenko2009-01-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Jason Johnston reported these problems with his external USB hard drive: http://bugs.gentoo.org/show_bug.cgi?id=250789 The number of reported sectors is off-by-one. /proc/bus/usb/devices: T: Bus=01 Lev=02 Prnt=08 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0dc4 ProdID=0073 Rev= 0.00 S: Manufacturer=Macpower Technology Co.LTD. S: Product=USB 2.0 3.5" DEVICE S: SerialNumber=03006C C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sergey Ovcharenko <velegrin@mail.mipt.ru> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: recognizing and enabling Nokia 5200 cell phoesPaulo Afonso Graner Fessel2009-01-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects the issue when one connects a Nokia 5200 cell phone in data storage mode. If one uses an unpatched unusual_devs.h, the following messages appear on /var/log/messages: Dec 12 01:03:24 alberich kernel: usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 12 01:03:25 alberich kernel: usb 4-2: configuration #1 chosen from 1 choice Dec 12 01:03:25 alberich kernel: scsi10 : SCSI emulation for USB Mass Storage devices Dec 12 01:03:25 alberich kernel: usb 4-2: New USB device found, idVendor=0421, idProduct=04bd Dec 12 01:03:25 alberich kernel: usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dec 12 01:03:25 alberich kernel: usb 4-2: Product: Nokia 5200 Dec 12 01:03:25 alberich kernel: usb 4-2: Manufacturer: Nokia Dec 12 01:03:25 alberich kernel: usb 4-2: SerialNumber: 353930018354523 Dec 12 01:03:25 alberich kernel: usbcore: registered new interface driver ub Dec 12 01:03:30 alberich kernel: scsi 10:0:0:0: Direct-Access Nokia Nokia 5200 0000 PQ: 0 AN SI: 4 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] 3985409 512-byte hardware sectors (2041 MB) Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Write Protect is off Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Assuming drive cache: write through Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] 3985409 512-byte hardware sectors (2041 MB) Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Write Protect is off Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Assuming drive cache: write through Dec 12 01:03:30 alberich kernel: sdg: sdg1 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Attached SCSI removable disk Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: Attached scsi generic sg9 type 0 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Add. Sense: No additional sense information Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Add. Sense: No additional sense information Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] (...) The MicroSD card in the phone remains inaccessible and finally the cell phone turns itself off. The patch solves this problem and makes the cell phone fully accessible: [root@alberich kernel-linus-2.6.27.5-1mdv]# df -h Sist. Arq. Tam Usad Disp Uso% Montado em /dev/sda6 31G 5,2G 26G 17% / /dev/sda1 92M 27M 61M 31% /boot /dev/mapper/homevg-homelv 240G 237G 3,5G 99% /home /dev/sda3 21G 7,9G 13G 40% /mnt/windows /dev/sdg1 2,0G 287M 1,7G 15% /media/disk <-------- I've found necessary to use the FL_US_CAPACITY_FIX switch, as without it the cell phone is recognized but it went berserk when performing low-level functions on it (a fdisk -l /dev/uba for example). lsusb -v output follows: Bus 004 Device 004: ID 0421:04bd Nokia Mobile Phones Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0421 Nokia Mobile Phones idProduct 0x04bd bcdDevice 6.03 iManufacturer 1 Nokia iProduct 2 Nokia 5200 iSerial 3 353930018354523 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0001 Self Powered Signed-off-by: Paulo Afonso Graner Fessel <pfessel@gmail.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: storage: extend unusual range for 067b:3507Oliver Neukum2009-01-071-1/+1
| | | | | | | | | | This device has been released in a new revision which is still buggy. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: another unusual_devs entry for another bad Argosy storage deviceNguyen Anh Quynh2009-01-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have another Argosy USB storage device, which has the same problem with the Argosy USB storage device already fixed in 2.6.27.7. But this device has another product ID (840:84), so this patch adds a new entry into unusual_devs to fix the mount problem. I enclose here two patches: one against 2.6.27.8, and another against the latest linus-git tree. The information about the Argosy device is like below: #lsusb -v -d 840:84 Bus 005 Device 005: ID 0840:0084 Argosy Research, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0840 Argosy Research, Inc. idProduct 0x0084 bcdDevice 0.01 iManufacturer 1 Generic iProduct 2 USB 2.0 Storage Device iSerial 3 8400000000002549 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Before the patch, dmesg returns a lot of information like below (my dmesg is overflown): .... [ 138.833390] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information [ 138.877631] sd 7:0:0:0: [sdb] Sense Key : No Sense [current] [ 138.877643] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information [ 138.921906] sd 7:0:0:0: [sdb] Sense Key : No Sense [current] [ 138.921923] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information .... After the fix, dmesg returns below information: .... usb 5-1: new high speed USB device using ehci_hcd and address 5 usb 5-1: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 7:0:0:0: Direct-Access HTS54808 0M9AT00 MG4O PQ: 0 ANSI: 0 sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 7:0:0:0: [sdb] Assuming drive cache: write through sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 7:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 7:0:0:0: [sdb] Attached SCSI disk sd 7:0:0:0: Attached scsi generic sg1 type 0 kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Cc: Kuniyasu Suzaki <k.suzaki@aist.go.jp> Signed-off-by: Nguyen Anh Quynh <aquynh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs.h additions for Pentax K10DDaniel Drake2009-01-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Jaak Ristioja reported problems with his Pentax K10D camera: https://bugs.gentoo.org/show_bug.cgi?id=250406 /proc/bus/usb/devices: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0a17 ProdID=006e Rev= 1.00 S: Manufacturer=PENTAX Corporation S: Product=K10D C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=100ms The number of reported sectors is off-by-one. Signed-off-by: Daniel Drake <dsd@gentoo.org> Cc: Kadianakis George <desnacked@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com>
* Merge branch 'drm-next' of ↵Linus Torvalds2009-01-0610-39/+397
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: fix ordering of driver unload vs agp unload. drm/i915: Respect the other stolen memory sizes we know of. drm/i915: Non-mobile parts don't have integrated TV-out. drm/i915: Add support for integrated HDMI on G4X hardware. drm/i915: Pin cursor bo and unpin old bo when setting cursor. drm/i915: Don't allow objects to get bound while VT switched.
| * drm: fix ordering of driver unload vs agp unload.Dave Airlie2009-01-071-3/+3
| | | | | | | | | | | | | | For KMS drivers, we really need to cleanup the driver before disabling the AGP subsystem. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm/i915: Respect the other stolen memory sizes we know of.Eric Anholt2009-01-072-14/+40
| | | | | | | | | | | | | | fd.o bug #19336. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
| * drm/i915: Non-mobile parts don't have integrated TV-out.Eric Anholt2009-01-071-1/+1
| | | | | | | | | | Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
| * drm/i915: Add support for integrated HDMI on G4X hardware.Eric Anholt2009-01-077-7/+322
| | | | | | | | | | | | | | | | This is ported directly from the userland 2D driver code. The HDMI audio bits aren't hooked up yet. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
| * drm/i915: Pin cursor bo and unpin old bo when setting cursor.Kristian Høgsberg2009-01-072-8/+22
| | | | | | | | | | | | | | | | | | We also didn't track the cursor bo before and would leak a reference when the cursor image was change. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
| * drm/i915: Don't allow objects to get bound while VT switched.Eric Anholt2009-01-071-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | This avoids a BUG_ON in the enter_vt path due to objects being in the GTT when we shouldn't have ever let them be (as we're not supposed to touch the device during that time). This was triggered by a change in the 2D driver to use the GTT mapping of objects after pinning them to improve software fallback performance. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-01-0646-521/+2944
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: i8042 - add Dell Vostro 1510 to nomux list Input: gtco - use USB endpoint API Input: add support for Maple controller as a joystick Input: atkbd - broaden the Dell DMI signatures Input: HIL drivers - add MODULE_ALIAS() Input: map_to_7segment.h - convert to __inline__ for userspace Input: add support for enhanced rotary controller on pxa930 and pxa935 Input: add support for trackball on pxa930 and pxa935 Input: add da9034 touchscreen support Input: ads7846 - strict_strtoul takes unsigned long Input: make some variables and functions static Input: add tsc2007 based touchscreen driver Input: psmouse - add module parameters to control OLPC touchpad delays Input: i8042 - add Gigabyte M912 netbook to noloop exception table Input: atkbd - Samsung NC10 key repeat fix Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptop Input: libps2 - handle 0xfc responses from devices Input: add support for Wacom W8001 penabled serial touchscreen Input: synaptics - report multi-taps only if supported by the device Input: add joystick driver for Walkera WK-0701 RC transmitter ...
| * Input: i8042 - add Dell Vostro 1510 to nomux listJiri Kosina2009-01-061-0/+7
| | | | | | | | | | | | | | | | Dell Vostro needs 'nomux' quirk, otherwise the touchpad misbehaves. Reported-by: Robert Kiwanuka <robert.kiwanuka@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * Merge branch 'next' into for-linusDmitry Torokhov2008-12-3046-521/+2937
| |\
| | * Input: gtco - use USB endpoint APIJulia Lawall2008-12-301-1/+1
| | | | | | | | | | | | | | | | | | | | | Use usb_endpoint_xfer_int(epd) instead of open-conding the check. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: add support for Maple controller as a joystickAdrian McMenamin2008-12-303-0/+206
| | | | | | | | | | | | | | | | | | | | | Add support for the SEGA Dreamcast Maple controller as a joystick Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: atkbd - broaden the Dell DMI signaturesMatthew Garrett2008-12-301-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some Dells need the dell input quirk applied but have a different vendor string in their DMI tables. Add an extra entry to cover these machines as well. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: HIL drivers - add MODULE_ALIAS()Helge Deller2008-12-303-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add MODULE_ALIAS() to the HIL keyboard (hil_kbd.c) and HIL mouse (hil_ptr.c) drivers to make kernel module autoloader functional. Report HIL port number ID in serio id.id field. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: add support for enhanced rotary controller on pxa930 and pxa935Yong Yao2008-12-293-0/+222
| | | | | | | | | | | | | | | | | | Signed-off-by: Yong Yao <yaoyong@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: add support for trackball on pxa930 and pxa935Yong Yao2008-12-293-13/+289
| | | | | | | | | | | | | | | | | | Signed-off-by: Yong Yao <yaoyong@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: add da9034 touchscreen supportEric Miao2008-12-233-0/+398
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the built-in touchscreen controller in DA9034 (aka Micco), usually found on platforms with xscale processors. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: ads7846 - strict_strtoul takes unsigned longHarvey Harrison2008-12-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix sparse warning introduced by: commit 160f1fef7e52e974489b3c70fbd4e094c06965c2 Input: convert drivers to use strict_strtoul() Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: make some variables and functions staticRoel Kluin2008-12-202-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: add tsc2007 based touchscreen driverKwangwoo Lee2008-12-203-0/+393
| | | | | | | | | | | | | | | | | | | | | | | | This drive has been tested on ARM9 based SoC - MV86XX. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: psmouse - add module parameters to control OLPC touchpad delaysPaul Fox2008-12-201-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HPGK touchpad that is found on the XO driver has historically exhibitted eratic behaviour in various environments (very dry, very humid, etc) that can be worked around via some delays. This patch turns those delays into module parameters to make testing simpler. Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Deepak Saxena <dsaxena@laptop.org> Acked-By: Andres Salomon <dilinger@debian.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: i8042 - add Gigabyte M912 netbook to noloop exception tableOzan Çağlayan2008-12-201-0/+8
| | | | | | | | | | | | | | | | | | | | | Gigabyte M912's touchpad needs i8042.noloop for working. Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: atkbd - Samsung NC10 key repeat fixStuart Hopkins2008-12-201-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the key repeat issue with the Fn+F? keys on the new Samsung NC10 Netbook, so that the keys can be defined and used within ACPID correctly, otherwise the keys repeat indefinately. This solves part of http://bugzilla.kernel.org/show_bug.cgi?id=12021 Signed-off-by: Stuart Hopkins <stuart@dodgy-geeza.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptopRikard Ljungstrand2008-12-201-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | Add quirk for misbehaving volume buttons on HP Pavilion ZV6100 laptop which are not sending keyrelease events, as reported by Aaron Pickett. Signed-off-by: Rikard Ljungstrand <lrikard@student.chalmers.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Merge commit 'v2.6.28-rc9' into nextDmitry Torokhov2008-12-20754-7642/+16241
| | |\
| | * | Input: libps2 - handle 0xfc responses from devicesDmitry Torokhov2008-11-241-4/+16
| | | | | | | | | | | | | | | | Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: add support for Wacom W8001 penabled serial touchscreenJaya Kumar2008-11-243-0/+339
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Wacom W8001 sensor is a sensor device (uses electromagnetic resonance) and it is interfaced via its serial microcontroller to the host. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: synaptics - report multi-taps only if supported by the devicePeter Hutterer2008-11-201-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Section 2.4.4 of the Synaptics TouchPad Interfacing Guide, bit 2 specifies if multi-finger detection is provided by the touchpad. Thus, only set BTN_TOOL_DOUBLETAP and BTN_TOOL_TRIPLETAP if the device actually supports it. Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: add joystick driver for Walkera WK-0701 RC transmitterPeter Popovec2008-11-193-0/+305
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Peter Popovec <popovec@fei.tuke.sk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: pcspkr - fix PIT lockup on some chipsetsZoltan Devai2008-11-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There've been reports [1] about the sysem bell causing a hard lockup. My machine was affected as well: any speaker output hung the machine completely, nothing in the logs, no magic sysrq, etc., looked like a hardware problem. Had a closer look on the issue, and it turned out that the pcspkr module is responsible. The cause is the bad setup of Timer 2 in the i8253 controller, which probably hangs the whole PIT controller. Intel datasheets [2] state that the timer registers are in an undefined state after reset and they need to be programmed before enabling the timer. (And enabling without programming the frequency first doesn't make sense anyway). I don't know which chipsets are affected (if not all), it also depends on the BIOS whether it initializes the timer (e.g. to beep when you start the machine). The following patch solved the issue on my ICH6 notebook, couldn't test it with any others, but should be safe to apply. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/146151 https://bugs.launchpad.net/ubuntu/+bug/270790 http://ubuntuforums.org/showthread.php?t=227693 http://bugs.gentoo.org/show_bug.cgi?id=222583 https://bugzilla.redhat.com/show_bug.cgi?id=454225 [2] http://www.intel.com/assets/pdf/datasheet/252516.pdf http://www.intel.com/assets/pdf/datasheet/301473.pdf http://www.intel.com/design/chipsets/datashts/29065503.pdf Signed-off-by: Zoltan Devai <zdevai@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: usbtouchscreen - fix TSC-10 DM USB controllers without EEPROMNuno Lucas2008-11-191-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usbtouchscreen module implements a driver for the TSC-10 DM USB touchscreen controllers, but assumes a 2-byte response for the CMD_RESET and CMD_RATE commands, when they can be only a single byte when no EEPROM is connected. The driver worked with an earlier controller revision, but new revisions of the controller fail. It seems the problem is that the early controller had the SEL4/EEPROM-CS pin high, but the new controller has it down, making the response different. Without the fix, the controller would answer the single byte 0x06 (ACK), making the init fail with -ENODEV because buf[1] is 0xFF (as initialized before). As the single byte is the only thing we need to check it was ok, there is no need to verify the second byte. The [0x15 0x01] case is the NAK [0x15] response for when there is no data in the EEPROM [bit-0 of second byte set], so I let that be, as I don't have any controller with an EEPROM. With this patch, both the earlier and latest controller work the same. Note: This was previously submited as BUG #11961 [1] on the bugzilla tracker, but rebased to version 2.6.27.4 and with unnecessary comments and printk's removed. [1] http://bugzilla.kernel.org/show_bug.cgi?id=11961 Signed-off-by: Nuno Lucas <ntlucas@gmail.com> Acked-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2008-10-3010-17/+15
| | | | | | | | | | | | | | | | | | | | | | | | Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: omap-keypad - allow more than 6 rowsPeter Ujfalusi2008-10-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason to limit the GPIO rows to 6 for OMAP2. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: omap-keypad - interrupt disable fixPeter Ujfalusi2008-10-291-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPIO interrupts are disabled several times after the first key press. No need to disable - again - the interrupts in the omap_kp_scan_keypad function on OMAP2. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: appletouch - driver refactoringStelian Pop2008-10-291-138/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The appletouch driver has grown up from supporting only a couple of touchpads into supporting many touchpads, which can have different number of sensors, different aspect ratios etc. This patch cleans up the current driver code and makes it easy to support the features of each different touchpad. As a side effect, this patch also modifies the 'Y' multiplication factor of the 'geyser3' and 'geyser4' touchpads (found on Core Duo and Core2 Duo MacBook and MacBook Pro laptops) in order to make the touchpad output match the aspect ratio of the touchpad (Y factor changed from 43 to 64). [dtor@mail.ru: make atp_info constant] Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: gpio-keys - add flag to allow auto repeatDominic Curran2008-10-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a flag to gpio-key driver to turn on the input subsystems auto repeat feature if needed. Signed-off-by: Dominic Curran <dcurran@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: xilinx_ps2 - various cleanupsJohn Linn2008-10-271-107/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Review comments were incorporated to improve the driver. 1. Some data was eliminated that was not needed. 2. Renaming of variables for clarity. 3. Removed unneeded type casting. 4. Changed to use dev_err rather than other I/O. 5. Merged together some functions. 6. Added kerneldoc format to functions. Signed-off-by: Sadanand <sadanan@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * | Input: refactor evdev 32bit compat to be shareable with uinputPhilip Langdale2008-10-275-217/+383
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, evdev has working 32bit compatibility and uinput does not. uinput needs the input_event code that evdev uses, so let's refactor it so it can be shared. [dtor@mail.ru: add fix for force feedback compat issues] Signed-off-by: Philip Langdale <philipl@overt.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds2009-01-06775-26439/+472649
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (237 commits) Staging: android: binder: fix build errors Staging: android: add lowmemorykiller driver Staging: android: remove dummy android.c driver Staging: android: timed_gpio: Rename android_timed_gpio to timed_gpio Staging: android: add timed_gpio driver Staging: android: add ram_console driver Staging: android: add logging driver staging: android: binder: Fix use of euid Staging: android: binder: Fix gcc warnings about improper format specifiers for size_t in printk Staging: android: add binder driver Staging: add android framework Staging: epl: fix netdev->priv b0rkage Staging: epl: hr timers all run in hard irq context now Staging: epl: run Lindent on *.c files Staging: epl: run Lindent on *.h files Staging: epl: run Lindent on all user/*.h files Staging: epl: run Lindent on all kernel/*.h files Staging: add epl stack Staging: frontier: fix compiler warnings Staging: frontier: remove unused alphatrack_sysfs.c file ...
generated by cgit (git 2.34.1) at 2024-09-21 18:05:52 +0000