summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* [PARISC] Make Lasi Ethernet depend on GSC onlyMatthew Wilcox2006-12-081-3/+3
| | | | | | | | If we separate out LASI and ASP support later, we'll need this. Plus, this makes it consistent with the ncr700 scsi driver. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] lasi_82596: use BUILD_BUG_ON() and constify static arrayHelge Deller2006-12-081-27/+7
| | | | | Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] Fix PCI bus numbering in the presence of Cardbus bridgesMatthew Wilcox2006-12-081-13/+19
| | | | | | | | | | Firmware ignores Cardbus bridges, so when Linux assigns bus numbers, it must override firmware's notion of what the busses are numbered. This is not sufficient to support the Cardbus bridge as there is also no interrupt routing table entry for them. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] sparse fixesMatthew Wilcox2006-12-083-3/+3
| | | | | | | 0/NULL, missing __user, missing __iomem, non-ANSI prototype. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] parisc-agp: Fix integer/pointer warningMatthew Wilcox2006-12-081-1/+1
| | | | | Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] [MUX] Get the hversion directly from the parisc_deviceRyan Bradetich2006-12-081-4/+5
| | | | | | | | | | | | Willy pointed out the hversion is already stored in the parisc_device, so I do not need to extract this information directly from the IODC data. Also by using the information in the parisc_device I can avoid re-reading the IODC data for the Muxes with specifed port counts. Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] [MUX] Correctly report the number of available portsRyan Bradetich2006-12-081-11/+31
| | | | | | | | | | This patch adds a new function to return the actual number of ports available. Some of the built-in Muxes return the number of supported ports, but not all of these port are available for use. Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] [MUX] Detect multiple cards in the correct orderRyan Bradetich2006-12-081-8/+30
| | | | | | | | | | | This patch follows the example of the 8250_gsc driver by probing for specific built-in Mux cards first. This allows the system to preserve the correct detection order with multiple Mux cards. Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] [MUX] Make the Serial Mux driver work as moduleRyan Bradetich2006-12-081-78/+57
| | | | | | | | | | | | | | | | | | The following updates are based off a patch from willy: * Removal of the mux_card list. * Add the mux_remove function. Other updates: * Re-organize the driver structure a bit to make the mux_init and mux_exit functions more symmetrical. * Added the del_timer. * Unregistered the console. At this point I can insmod, rmmod, and re-insmod the mux without any failures. Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] [MUX] Claim resources for the Mux driverRyan Bradetich2006-12-081-1/+60
| | | | | | | | This patch claims the iomem resources for the Mux driver. Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] [MUX] Mux driver updatesRyan Bradetich2006-12-081-2/+11
| | | | | | | | | This patch changes the Mux console to use the Mux hardware instead of the PDC Software console. Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] [MUX] Mux driver bug fixRyan Bradetich2006-12-081-10/+17
| | | | | | | | | | This patch addresses the problems identified by Russell King in the following email: http://lists.parisc-linux.org/pipermail/parisc-linux/2005-December/027912.html Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* [PARISC] HPPB bus updates for E-Class systemsRyan Bradetich2006-12-081-8/+6
| | | | | | | | | | This patch addresses the following issues: * Removes an incorrect comment. * Fixes a couple of compiler warnings. * Properly detects the HP-PB bus on E-Class systems. Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2006-12-0717-1905/+1411
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (55 commits) ieee1394: sbp2: code formatting around work_struct stuff ieee1394: nodemgr: remove a kcalloc ieee1394: conditionally export ieee1394_bus_type ieee1394: Consolidate driver registering ieee1394: sbp2: convert from PCI DMA to generic DMA ieee1394: nodemgr: spaces to tabs ieee1394: nodemgr: fix deadlock in shutdown ieee1394: nodemgr: remove duplicate assignment sbp2: make 1bit bitfield unsigned ieee1394: schedule *_oui sysfs attributes for removal ieee1394: schedule unused symbol exports for removal ieee1394: dv1394: schedule for feature removal ieee1394: raw1394: defer feature removal of old isoch interface ieee1394: ohci1394: call PMac code in shutdown only for proper machines ieee1394: ohci1394: reformat PPC_PMAC platform code ieee1394: ohci1394: add PPC_PMAC platform code to driver probe ieee1394: sbp2: wrap two functions into one ieee1394: sbp2: update comment on things to do ieee1394: sbp2: use list_move_tail() ieee1394: sbp2: more concise names for types and variables ...
| * ieee1394: sbp2: code formatting around work_struct stuffStefan Richter2006-12-071-7/+9
| | | | | | | | | | | | Merge is finished, can bring the code in readable style again. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: nodemgr: remove a kcallocStefan Richter2006-12-071-46/+20
| | | | | | | | | | | | Was I sleepwalking when I wrote this? Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: conditionally export ieee1394_bus_typeStefan Richter2006-12-071-0/+1
| | | | | | | | | | | | | | | | | | Follow-up to patch "Consolidate driver registering": Since I plan the lifetime of Linux 2.6.20 to be the deprecation phase of CONFIG_IEEE1394_EXPORT_FULL_API, it seems fair to keep all previously exported symbols available with this option until this phase is over. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: Consolidate driver registeringBen Collins2006-12-078-27/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates some bookkeeping for driver registering. It closely models what pci_register_driver() does. The main addition is that the owner of the driver is set, so we get a proper symlink for /sys/bus/ieee1394/driver/*/module. Also moves setting of name and bus type into nodemgr. Because of this, we can remove the EXPORT_SYMBOL for ieee1394_bus_type, since it's now only used in ieee1394.ko. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: convert from PCI DMA to generic DMAStefan Richter2006-12-073-68/+62
| | | | | | | | | | | | API conversion without change in functionality Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: nodemgr: spaces to tabsStefan Richter2006-12-071-49/+49
| | | | | | | | | | | | whitespace pedantry Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: nodemgr: fix deadlock in shutdownStefan Richter2006-12-071-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If "modprobe ohci1394" was quickly followed by "modprobe -r ohci1394", say with 1 second pause in between, the modprobe -r got stuck in uninterruptible sleep in kthread_stop. At the same time the knodemgrd slept uninterruptibly in bus_rescan_devices_helper. That's because driver_detach took the semaphore of the PCI device and bus_rescan_devices_helper wanted to take the semaphore of the FireWire host device's parent, which is the same semaphore. This was a regression since Linux 2.6.16, commit bf74ad5bc41727d5f2f1c6bedb2c1fac394de731, "Hold the device's parent's lock during probe and remove". The fix (or workaround) adds a dummy driver to the hpsb_host device. Now bus_rescan_devices_helper won't scan the host device anymore. This doesn't hurt since we have no drivers which will bind to these devices and it is unlikely that there will ever be such a driver. The dummy driver is befittingly presented as a representation of ieee1394 itself. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=6706 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: nodemgr: remove duplicate assignmentStefan Richter2006-12-071-1/+1
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * sbp2: make 1bit bitfield unsignedLuca Tettamanti2006-12-071-1/+1
| | | | | | | | | | | | | | A signed single-bit bitfield doesn't make much sense. Make it unsigned. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: schedule *_oui sysfs attributes for removalStefan Richter2006-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | There is no manpower available to reform oui.db into a library for use in more kernel subsystems. The low ratio of usefulness to size and the occasional need to update oui.db from IEEE's official list suggest to drop oui.db. I plan to make a userspace script available which translates the remaining numeric sysfs attributes to names of organizations. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: schedule unused symbol exports for removalStefan Richter2006-12-071-7/+2
| | | | | | | | | | | | | | This also means that former parts of ieee1394's API will be subject to change or removal. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: dv1394: schedule for feature removalStefan Richter2006-12-072-9/+8
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: raw1394: defer feature removal of old isoch interfaceStefan Richter2006-12-071-0/+17
| | | | | | | | | | | | | | | | | | Known to be affected: - libdc1394: prefers video1394 for now, old-style raw1394 support might be dropped eventually - OpenH323 PWLib, AVC video input module: uses libraw1394's old API Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: ohci1394: call PMac code in shutdown only for proper machinesStefan Richter2006-12-071-1/+1
| | | | | | | | | | | | There has been an if(...) missing, for ages. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: ohci1394: reformat PPC_PMAC platform codeStefan Richter2006-12-071-20/+14
| | | | | | | | | | | | Adjust whitespace and line lengths Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: ohci1394: add PPC_PMAC platform code to driver probeStefan Richter2006-12-071-4/+15
| | | | | | | | | | | | | | | | Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7431 iBook G3 threw a machine check exception and put the display backlight to full brightness after ohci1394 was unloaded and reloaded. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: wrap two functions into oneStefan Richter2006-12-071-23/+7
| | | | | | | | | | | | Move the body of a function into its only caller. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: update comment on things to doStefan Richter2006-12-071-7/+19
| | | | | | | | | | | | Some people actually look at those comments. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: use list_move_tail()Stefan Richter2006-12-071-2/+1
| | | | | | | | | | | | It's OK to reorder list_del() and sbp2util_free_command_dma() here. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: more concise names for types and variablesStefan Richter2006-12-072-598/+575
| | | | | | | | | | | | | | | | | | "struct scsi_id_instance_data" represents a logical unit. Rename it to "struct sbp2_lu", and "scsi_id" to "lu". Rename some other variables too. Wrap almost all lines after at most 80 columns. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: remove unused struct membersStefan Richter2006-12-072-25/+4
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: proper unit in module parameter descriptionStefan Richter2006-12-071-1/+2
| | | | | | | | | | | | It's 2^20 bit/s, not 0.001 bit. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: clean up sbp2_ namespaceStefan Richter2006-12-072-133/+132
| | | | | | | | | | | | | | Prepend sbp2*_ to anything globally defined in sbp2.c except for some macros. Strip sbp2_ from names of struct members. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: some conditions in queue_command are unlikelyStefan Richter2006-12-071-5/+5
| | | | | | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: remove superfluous commentsStefan Richter2006-12-072-355/+109
| | | | | | | | | | | | And update and reformat remaining comments. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: delayed_work -> work_structStefan Richter2006-12-072-16/+12
| | | | | | | | | | | | | | | | | | This work is not delayed. Also bring the code format in a state which reduces my work to merge pending sbp2 patchs. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: coding style of some macrosStefan Richter2006-12-071-77/+78
| | | | | | | | | | | | Adjust parentheses, indentation, line lengths. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: remove debug macrosStefan Richter2006-12-071-280/+20
| | | | | | | | | | | | No need to keep them in released sources. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: consolidate log levelsStefan Richter2006-12-071-19/+12
| | | | | | | | | | | | | | | | Replace some calls to SBP2_ERR and SBP2_WARN by SBP2_INFO. Remove logging macros SBP2_NOTICE and SBP2_WARN. Remove direct usage of HPSB_ logging macros. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: remove duplicate codeStefan Richter2006-12-071-11/+0
| | | | | | | | | | | | | | | | The same case is handled further below in sbp2scsi_complete_command. Note, the second version behaves slightly different but looks preferable. It's an extremely unlikely case by the way. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: remove dead codeStefan Richter2006-12-071-15/+0
| | | | | | | | | | | | This has been within #if 0 for a long time and is wrong anyway. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: clean up function declarationsStefan Richter2006-12-072-104/+86
| | | | | | | | | | | | | | | | | | Remove unnecessary function prototypes. Remove variable names from function prototypes. Move declarations from sbp2.h to sbp2.c. Move definitions of driver templates together near the top of sbp2.c. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: sbp2: remove irritating log messageStefan Richter2006-12-071-2/+0
| | | | | | | | | | | | | | | | | | | | | | The queue depth can be read from /sys/bus/scsi/devices/*/queue_depth, so don't log it. And the hint about speed improvements is misleading, at least under current kernels. If serialization is switched off, read performance is typically increased by less than 10%. (I did not test write performance recently.) On the other hand, serialize_io=0 is not yet safe due to some implementation issues that are not trivial to fix. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ohci1394: shortcut irq printingAlexey Dobriyan2006-12-071-4/+2
| | | | | | | | | | | | | | To print irq number no need to transform to string using %d, then print using %s. Just use %d. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
| * ieee1394: nodemgr: take it easy if bus_rescan_devices failsStefan Richter2006-12-071-3/+2
| | | | | | | | | | | | This happens. No need to log a BUG trace. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * drivers/ieee1394/*: use kmemdup()Eric Sesterhenn2006-12-072-4/+2
| | | | | | | | | | | | Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
generated by cgit (git 2.34.1) at 2024-11-20 00:30:41 +0000