summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* cxgb3: Add Aeluros 2020 phy supportDivy Le Ray2009-05-294-65/+769
| | | | | | | | Add support for the AEL2020 phy. Add PCI IDs of the boards using this phy. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb3: move away from LLTXDivy Le Ray2009-05-292-11/+7
| | | | | | | cxgb3 no longer advertizes LLTX. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: bfin_mac: add Blackfin MII bus to platform bus to allow DSA accessGraf Yang2009-05-291-33/+84
| | | | | | | | | When we register the MII bus to the platfrom bus, the Distributed Switch Architecture can hook in transparently. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: bfin_mac: fix performance issue found by netperfMichael Hennerich2009-05-291-84/+26
| | | | | | | | | | | - Remove dead long delay - Use proper defines - Remove broken implementation of the TX DMA Data Alignment TXDWA feature Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: bfin_mac: fix malformed UDP packet transmission when polling with KGDBSonic Zhang2009-05-291-0/+6
| | | | | | | | | | | | | | Writes to the DMA descriptors may sit in the internal Blackfin data buffers and not actually be available when the DMA engine goes to fetch them. This does not typically happen, but when dealing with short/fast packets such as UDP and polling KGDB, this occurs much more frequently. Same goes for heavy loads as seen by netperf tests or large scp transfers. So force the buffers to drain with SSYNC otherwise we get random malformed packets. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: bfin_mac: drop useless IRQF_SHARED from Blackfin EMAC interruptMichael Hennerich2009-05-291-1/+1
| | | | | | | | | | | The IRQ used by the Blackfin EMAC is internal to the peripheral and cannot be used to generate any other interrupt, so there is no point in marking it as IRQF_SHARED. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* veth: dont release skb->dst in veth_xmit()Eric Dumazet2009-05-291-2/+0
| | | | | | | No need to release skb->dst, its now done by core network. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* korina: periodically poll the mediaFlorian Fainelli2009-05-291-0/+14
| | | | | | | | | | | This patch makes the korina driver poll the media for link change. This is actually required on Mikrotik RB532 (not RB532A) for korina to operate properly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: replace dma_sync_single with dma_sync_single_for_cpuFUJITA Tomonori2009-05-294-9/+10
| | | | | | | | | | | | This replaces dma_sync_single() with dma_sync_single_for_cpu() because dma_sync_single() is an obsolete API; include/linux/dma-mapping.h says: /* Backwards compat, remove in 2.7.x */ #define dma_sync_single dma_sync_single_for_cpu #define dma_sync_sg dma_sync_sg_for_cpu Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dont update dev->trans_startEric Dumazet2009-05-2921-39/+10
| | | | | | | | | | | | | Second round of drivers for Gb cards (and NIU one I forgot in the 10GB round) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dont update dev->trans_start in 10GB driversEric Dumazet2009-05-2916-25/+8
| | | | | | | | | | | | | | | | | Followup of commits 9d21493b4beb8f918ba248032fefa393074a5e2b and 08baf561083bc27a953aa087dd8a664bb2b88e8e (net: tx scalability works : trans_start) (net: txq_trans_update() helper) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Multi queue drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers (vxge & tehuti) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'linux-2.6.31.y' of ↵David S. Miller2009-05-297-64/+109
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
| * wimax/i2400m: usb: fix device reset on autosuspend while not yet idleInaky Perez-Gonzalez2009-05-281-5/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the i2400m is connected to a network, the host interface (USB) cannot be suspended. For that to happen, the device has to have negotiated with the basestation to put the link on IDLE state. If the host tries to put the device in standby while it is connected but not idle, the device resets, as the driver should not do that. To avoid triggering that, when the USB susbsytem requires the driver to autosuspend the device, the driver checks if the device is not yet idle. If it is not, the request is requested (will be retried again later on after the autosuspend timeout). At some point the device will enter idle and the request will succeed (unless of course, there is network traffic, but at that point, there is no idle neither in the link or the host interface). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
| * wimax/i2400m: sdio: set the block size before enabling the functionInaky Perez-Gonzalez2009-05-281-9/+9
| | | | | | | | | | | | | | | | | | From a fix by Cindy H Kao: Block size has to be set before sending IOE enable because the firmware reads the block size register before it reads IOE register. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
| * wimax/i2400m: remove redundant readiness checks from i2400m_report_tlv_*()Inaky Perez-Gonzalez2009-05-282-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Functions i2400m_report_tlv*() are only called from i2400m_report_hook(), called in a workqueue by i2400m_report_hook_work(). The scheduler checks for device readiness before scheduling. Added an extra check for readiness in i2400m_report_hook_work(), which makes all the checks down the line redundant. Obviously the device state could change in the middle, but error handling would take care of that. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
| * wimax/i2400m: factor out 'state report's TLV handling to a functionInaky Perez-Gonzalez2009-05-281-39/+50
| | | | | | | | | | | | | | i2400m_report_state_hook() is going to get messier as we add handling code. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
| * wimax/i2400m: allow kernel commands to device to be logged tooInaky Perez-Gonzalez2009-05-282-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | By running 'echo 1 > /sys/kernel/debug/wimax:wmxX/i2400m/trace_msg_from_user', the driver will echo to user space all the commands being sent to the device from user space, along with the responses. However, this only helps with the commands being sent from user space; with this patch, the trace hook is moved to i2400m_msg_to_dev(), which is the single access point for running commands to the device (both by user space and the kernel driver). This allows better debugging by having a complete stream of commands/acks and reports. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
| * wimax/i2400m: trace commands sent from user space on the "echo" pipeInaky Perez-Gonzalez2009-05-282-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | When commands are sent from user space, trace both the command sent and the answer received over the "echo" pipe instead of over the "trace" pipe when command tracing is enabled. As well, when the device sends a reports/indications, send it over the "echo" pipe. The "trace" pipe is used by the device to send firmware traces; gets confusing. Another named pipe makes it easier to split debug information. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
| * wimax/i2400m: generate fake source MAC address with random_ether_addr()Inaky Perez-Gonzalez2009-05-283-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WiMAX i2400m driver needs to generate a fake source MAC address to fake an ethernet header (for destination, the card's MAC is used). This is the source of the packet, which is the basestation it came from. The basestation's mac address is not usable for this, as it uses its own namespace and it is not always available. Currently the fake source MAC address was being set to all zeros, which was causing trouble with bridging. Use random_ether_addr() to generate a proper one that creates no trouble. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
* | rtl8187: Remove pointless check in rtl8187_rx_cb().David S. Miller2009-05-281-6/+1
| | | | | | | | | | | | | | | | | | | | | | First of all, it exposes the SKB list implementation. Second of all it's not needed. If we get called here, we successfully enqueued the URB with the linked SKB and such a completion only gets called one time on such an SKB. Signed-off-by: David S. Miller <davem@davemloft.net>
* | p54: Use SKB list handling helpers instead of by-hand code.David S. Miller2009-05-281-27/+19
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | wavelan: Remove bogus debugging on skb->next being non-NULL.David S. Miller2009-05-272-9/+0
| | | | | | | | | | | | | | This eliminates explicit references to the SKB list handling implementation. Signed-off-by: David S. Miller <davem@davemloft.net>
* | aoe: Remove superfluous clearing of skb fields in new_skb().David S. Miller2009-05-271-7/+0
| | | | | | | | | | | | This code uses alloc_skb() which clears them out for us. Signed-off-by: David S. Miller <davem@davemloft.net>
* | appletalk: Add proper locking around IPDDP routing table.David S. Miller2009-05-271-8/+32
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use netdev stats in b44, sundance, via-rhine and via-velocityEric Dumazet2009-05-276-66/+73
| | | | | | | | | | | | | | | | Use struct net_device_stats provided in struct net_device instead of private ones. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r6040: check and update media statusFlorian Fainelli2009-05-271-1/+5
| | | | | | | | | | | | | | | | | | | | This patch removes the not-that-useful message in the r6040_timer which prints the PHY status. Instead replace it with a call to mii_check_media which will update the link status and print it on startup. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ixgbe: Fix build warningPeter P Waskiewicz Jr2009-05-261-1/+0
| | | | | | | | | | | | | | This patch fixes a build warning due to an unused label. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: Remove references to BUS_ID_SIZE, use MII_BUS_ID_SIZE instead.David S. Miller2009-05-261-1/+1
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | cpmac: Remove references to BUS_ID_SIZE, use MII_BUS_ID_SIZE.David S. Miller2009-05-261-1/+1
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | ixp4xx_eth: Remove references to BUS_ID_SIZE.David S. Miller2009-05-261-2/+2
| | | | | | | | | | | | Use MII_BUS_ID_SIZE instead. Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: Use a different default for each familyJean Delvare2009-05-261-17/+22
| | | | | | | | | | | | | | | | | | | | | | | | The r8169 driver supports 3 different families of network chips (RTL8169, RTL8168 and RTL8101). When an unknown version is found, the driver currently always defaults to the RTL8169 variant. This has very little chance to ever work for chips of the other families. So better define a per-family default. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/ucc_geth: allow to set mac address on running deviceKevin Hao2009-05-261-1/+32
| | | | | | | | | | | | | | | | | | | | | | | | Inspired by the patch for 8139too (bda6a15a). Currently we can't set mac address on a running ucc_geth device. But this is needed when you use this device as a bonding slave in bonding device in balance-alb mode. So add this feature for ucc_geth device. Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | niu: Add support for C10NEMTanli Chang2009-05-261-10/+47
| | | | | | | | | | | | | | | | This patch is for supporting C10NEM. C10NEM is a switch module, which has back-to-back XAUI link connected to blades. Signed-off-by: Tanli Chang <tanli.chang@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ixgbe: fix 82598 SFP initialization after driver load.Don Skidmore2009-05-263-19/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we loaded the driver with out a SFP module plugged in it would leave it in a state that make it later unable to link when a module was plugged in. This patch corrects that by: ixgbe_probe() - moving the check for IXGBE_ERR_SFP_NOT_PRESENT from after get_invariants() to after reset_hw() as now reset_hw() is where this condition will be indentified. ixgbe_reset_hw_82598() - Enable this function to now return IXGBE_ERR_SFP_NOT_PRESENT. ixgbe_identify_sfp_module_generic() - This where the lack of SFP module is detected. Modifications are added to allow a different return value for modules that just haven't been plugged in yet. Other functions were updated to allow correct logging. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ixgbe: Remove device ID 0x10d8Peter P Waskiewicz Jr2009-05-262-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Device ID 0x10d8 is the default silicon device ID for 82599. However, the device will not be functional without an EEPROM, so we want to prevent the driver from loading on the device. Otherwise, the driver will load, but no PHY setup or PCIe setup will occur, causing the device to be unusable. To prevent users from encountering this, just remove the device ID. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | igb/e1000e: update PSSR_MDIX value to reflect correct bitAlexander Duyck2009-05-262-2/+2
| | | | | | | | | | | | | | | | | | | | | | The phy port status register has the MDI-X status bit on bit 11, not bit 3 as is currently setup in the define. This patch corrects that so the correct bit is checked on igp PHY types. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | igb: Record host memory receive overflow in net_statsJesper Dangaard Brouer2009-05-262-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on previous patch from Jesper Dangaard Brouer. The RNBC (Receive No Buffers Count) register for the 82576, indicate that frames were received when there were no available buffers in host memory to store those frames (receive descriptor head and tail pointers were equal). The packet is still received by the NIC if there is space in the FIFO on the NIC. As the RNBC value is not a packet drop, the driver stores this value in net_stats.rx_fifo_errors to indicate that there were no system buffers available for the incoming packet. Actual dropped packets are counted in the MPC value. Saving the stats in dev->net_stats makes it visible via /proc/net/dev as "fifo", and thus viewable to ifconfig as "overruns" and 'netstat -i' as "RX-OVR". The Receive No Buffers Count (RNBC) can already be queried by ethtool -S as "rx_no_buffer_count". Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | igb: Implement reading of reg RQDPC (Receive Queue Drop Packet Count)Jesper Dangaard Brouer2009-05-263-10/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the previous patches from Jesper Dangaard Brouer <hawk@comx.dk> Implement reading the per queue drop stats register RQDPC (Receive Queue Drop Packet Count). It counts the number of packets dropped by a queue due to lack of descriptors available. Notice RQDPC (Receive Queue Drop Packet Count) stats only gets incremented, if the DROP_EN bit it set (in the SRRCTL register for that queue). If DROP_EN bit is NOT set, then the some what equivalent count is stored in RNBC (not per queue basis). The RQDPC register is only 12 bit, thus the precision might suffer due to overrun in-netween the watchdog polling interval. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | igb: add RQDPC (Receive Queue Drop Packet Count) register macroJeff Kirsher2009-05-261-0/+1
| | | | | | | | | | Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 8139*: convert printk() to pr_<foo>()Alexander Beregalov2009-05-262-84/+66
| | | | | | | | | | | | | | Also convert DPRINTK to pr_debug and dev_printk to dev_<foo>. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 3c5xx: convert printk() to pr_<foo>()Alexander Beregalov2009-05-264-242/+233
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | 3c50x: convert printk() to pr_<foo>()Alexander Beregalov2009-05-265-219/+216
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | atl1: use netdev->statsEric Dumazet2009-05-252-4/+3
| | | | | | | | | | | | | | | | Get rid of private struct net_device_stats in "struct atl1e_adapter", and use one provided in struct net_device instead. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sh_eth: Add support SH7724Yoshihiro Shimoda2009-05-253-6/+111
| | | | | | | | | | | | | | Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sh_eth: CPU dependency code collect to "struct sh_eth_cpu_data"Yoshihiro Shimoda2009-05-252-251/+386
| | | | | | | | | | | | | | | | This improves readability by collecting CPU dependency code. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sh_eth: fix receive desciptor loopYoshihiro Shimoda2009-05-251-0/+1
| | | | | | | | | | | | | | | | Fix the problem that this driver not update rxdesc in sh_eth_rx. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sh_eth: fix TX/RX descriptor not set physical memoryYoshihiro Shimoda2009-05-251-23/+12
| | | | | | | | | | | | | | | | Fix the probrem that TX/RX descirptor not set physical memory. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sh_eth: fix cache coherency issueYoshihiro Shimoda2009-05-251-0/+4
| | | | | | | | | | | | | | | | Fix the problem that may not work receive process by cache coherency issue. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Remove obsolete MV64360 config optionGabriel Paubert2009-05-251-1/+1
| | | | | | | | | | Signed-off-by: Gabriel Paubert <paubert@iram.es> Signed-off-by: David S. Miller <davem@davemloft.net>
* | iwmc3200wifi: fix link error when CFG80211 is not selectedZhu Yi2009-05-251-1/+2
| | | | | | | | | | | | | | | | | | | | The patch makes iwmc3200wifi select CFG80211 instead of LIB80211. This fixed module link error reported by Randy Dunlap <randy.dunlap@oracle.com> when compiling iwmc3200wifi without cfg80211 selected. WIRELESS_EXT is also selected by iwmc3200wifi. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-11-12 19:45:33 +0000