summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* qla2xxx: Disable MSI on qla24xx chips other than QLA2432.Ben Hutchings2010-07-051-15/+13
| | | | | | | | | | | | | | commit 6377a7ae1ab82859edccdbc8eaea63782efb134d upstream. On specific platforms, MSI is unreliable on some of the QLA24xx chips, resulting in fatal I/O errors under load, as reported in <http://bugs.debian.org/572322> and by some RHEL customers. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Input: psmouse - reset all types of mice before reconnectingDmitry Torokhov2010-07-051-4/+10
| | | | | | | | | | | | | | | | | commit ef110b24e28f36620f63dab94708a17c7e267358 upstream. Synaptics hardware requires resetting device after suspend to ram in order for the device to be operational. The reset lives in synaptics-specific reconnect handler, but it is not being invoked if synaptics support is disabled and the device is handled as a standard PS/2 device (bare or IntelliMouse protocol). Let's add reset into generic reconnect handler as well. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Cc: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* eeepc-laptop: check wireless hotplug eventsAlan Jenkins2010-07-051-0/+18
| | | | | | | | | | | | | | | | | | | | | | commit bc9d24a3aeb1532fc3e234907a8b6d671f7ed68f upstream. Before we mark the wireless device as unplugged, check PCI config space to see whether the wireless device is really disabled (and vice versa). This works around newer models which don't want the hotplug code, where we end up disabling the wired network device. My old 701 still works correctly with this. I can also simulate an afflicted model by changing the hardcoded PCI bus/slot number in the driver, and it seems to work nicely (although it is a bit noisy). In future this type of hotplug support will be implemented by the PCI core. The existing blacklist and the new warning message will be removed at that point. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* l2tp: Fix oops in pppol2tp_xmitJames Chapman2010-07-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3feec9095d12e311b7d4eb7fe7e5dfa75d4a72a5 upstream. When transmitting L2TP frames, we derive the outgoing interface's UDP checksum hardware assist capabilities from the tunnel dst dev. This can sometimes be NULL, especially when routing protocols are used and routing changes occur. This patch just checks for NULL dst or dev pointers when checking for netdev hardware assist features. BUG: unable to handle kernel NULL pointer dereference at 0000000c IP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp] *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/class/net/lo/operstate Modules linked in: pppol2tp pppox ppp_generic slhc ipv6 dummy loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_pcm snd_timer snd soundcore snd_page_alloc evdev psmouse serio_raw processor button i2c_piix4 i2c_core ati_agp agpgart pcspkr ext3 jbd mbcache sd_mod ide_pci_generic atiixp ide_core ahci ata_generic floppy ehci_hcd ohci_hcd libata e1000e scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Not tainted (2.6.32.8 #1) EIP: 0060:[<f89d074c>] EFLAGS: 00010297 CPU: 3 EIP is at pppol2tp_xmit+0x341/0x4da [pppol2tp] EAX: 00000000 EBX: f64d1680 ECX: 000005b9 EDX: 00000000 ESI: f6b91850 EDI: f64d16ac EBP: f6a0c4c0 ESP: f70a9cac DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=f70a8000 task=f70a31c0 task.ti=f70a8000) Stack: 000005a9 000005b9 f734c400 f66652c0 f7352e00 f67dc800 00000000 f6b91800 <0> 000005a3 f70ef6c4 f67dcda9 000005a3 f89b192e 00000246 000005a3 f64d1680 <0> f63633e0 f6363320 f64d1680 f65a7320 f65a7364 f65856c0 f64d1680 f679f02f Call Trace: [<f89b192e>] ? ppp_push+0x459/0x50e [ppp_generic] [<f89b217f>] ? ppp_xmit_process+0x3b6/0x430 [ppp_generic] [<f89b2306>] ? ppp_start_xmit+0x10d/0x120 [ppp_generic] [<c11c15cb>] ? dev_hard_start_xmit+0x21f/0x2b2 [<c11d0947>] ? sch_direct_xmit+0x48/0x10e [<c11c19a0>] ? dev_queue_xmit+0x263/0x3a6 [<c11e2a9f>] ? ip_finish_output+0x1f7/0x221 [<c11df682>] ? ip_forward_finish+0x2e/0x30 [<c11de645>] ? ip_rcv_finish+0x295/0x2a9 [<c11c0b19>] ? netif_receive_skb+0x3e9/0x404 [<f814b791>] ? e1000_clean_rx_irq+0x253/0x2fc [e1000e] [<f814cb7a>] ? e1000_clean+0x63/0x1fc [e1000e] [<c1047eff>] ? sched_clock_local+0x15/0x11b [<c11c1095>] ? net_rx_action+0x96/0x195 [<c1035750>] ? __do_softirq+0xaa/0x151 [<c1035828>] ? do_softirq+0x31/0x3c [<c10358fe>] ? irq_exit+0x26/0x58 [<c1004b21>] ? do_IRQ+0x78/0x89 [<c1003729>] ? common_interrupt+0x29/0x30 [<c101ac28>] ? native_safe_halt+0x2/0x3 [<c1008c54>] ? default_idle+0x55/0x75 [<c1009045>] ? c1e_idle+0xd2/0xd5 [<c100233c>] ? cpu_idle+0x46/0x62 Code: 8d 45 08 f0 ff 45 08 89 6b 08 c7 43 68 7e fb 9c f8 8a 45 24 83 e0 0c 3c 04 75 09 80 63 64 f3 e9 b4 00 00 00 8b 43 18 8b 4c 24 04 <8b> 40 0c 8d 79 11 f6 40 44 0e 8a 43 64 75 51 6a 00 8b 4c 24 08 EIP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp] SS:ESP 0068:f70a9cac CR2: 000000000000000c Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* wl1251: fix a memory leak in probeGrazvydas Ignotas2010-07-051-0/+1
| | | | | | | | | | | | commit aa679c36756003f1fabdb9fc6f00eb159559f7c3 upstream. wl1251_sdio_probe() error path is missing wl1251_free_hw, add it. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlwifi: recalculate average tpt if not currentReinette Chatre2010-07-051-4/+6
| | | | | | | | | | | | | | | | | | | | | | | commit 3d79b2a9eeaa066b35c49fbb17e3156a3c482c3e upstream. We currently have this check as a BUG_ON, which is being hit by people. Previously it was an error with a recalculation if not current, return that code. The BUG_ON was introduced by: commit 3110bef78cb4282c58245bc8fd6d95d9ccb19749 Author: Guy Cohen <guy.cohen@intel.com> Date: Tue Sep 9 10:54:54 2008 +0800 iwlwifi: Added support for 3 antennas ... the portion adding the BUG_ON is reverted since we are encountering the error and BUG_ON was created with assumption that error is not encountered. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlwifi: reset card during probeReinette Chatre2010-07-052-0/+15
| | | | | | | | | | | | | | | | | commit 4843b5a731b31916d100cfc5ba4d03ae78462ed9 upstream. To ensure that card is in a sane state during probe we add a reset call. This change was prompted by users of kdump who was not able to bring up the wireless driver in the kdump kernel. The problem here was that the primary kernel, which is not running at the time, left the wireless card up and running. When the kdump kernel starts it is thus possible to immediately receive interrupts from firmware after registering interrupt, but without being ready to deal with interrupts from firmware yet. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* p54usb: Add device ID for Dell WLA3310 USBJason Dravet2010-07-051-0/+1
| | | | | | | | | | | | | | | commit 0f666a08901f8b01f294ca0ad751019375240ae3 upstream. Add Dell WLA3310 USB wireless card, which has a Z-Com XG-705A chipset, to the USB Ids in p54usb. Signed-off-by: Jason Dravet <dravet@hotmail.com> Tested-by: Richard Gregory Tillmore <rtillmore@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cdc-acm: fix resource reclaim in error path of acm_probeAxel Lin2010-07-051-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | commit c2572b78aa0447244a38e555ebb1b3b48a0088a5 upstream. This patch fixes resource reclaim in error path of acm_probe: 1. In the case of "out of memory (read urbs usb_alloc_urb)\n")", there is no need to call acm_read_buffers_free(acm) here. Fix it by goto alloc_fail6 instead of alloc_fail7. 2. In the case of "out of memory (write urbs usb_alloc_urb)", usb_alloc_urb may fail in any iteration of the for loop. Current implementation does not properly free allocated snd->urb. Fix it by goto alloc_fail8 instead of alloc_fail7. 3. In the case of device_create_file(&intf->dev,&dev_attr_iCountryCodeRelDate) fail, acm->country_codes is kfreed. As a result, device_remove_file for dev_attr_wCountryCodes will not be executed in acm_disconnect. Fix it by calling device_remove_file for dev_attr_wCountryCodes before goto skip_countries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: fix DTR/RTS line modesDaniel Mack2010-07-051-0/+4
| | | | | | | | | | | | | | | | | | | | | commit 6a1a82df91fa0eb1cc76069a9efe5714d087eccd upstream. Call set_mctrl() and clear_mctrl() according to the flow control mode selected. This makes serial communication for FT232 connected devices work when CRTSCTS is not set. This fixes a regression introduced by 4175f3e31 ("tty_port: If we are opened non blocking we still need to raise the carrier"). This patch calls the low-level driver's dtr_rts() function which consequently sets TIOCM_DTR | TIOCM_RTS. A later call to set_termios() without CRTSCTS in cflags, however, does not reset these bits, and so data is not actually sent out on the serial wire. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci: Wait for controller to be ready after reset.Sarah Sharp2010-07-051-1/+12
| | | | | | | | | | | | | commit 2d62f3eea98354d61f90d6b115eecf9be5f4bdfe upstream. After software resets an xHCI host controller, it must wait for the "Controller Not Ready" (CNR) bit in the status register to be cleared. Software is not supposed to ring any doorbells or write to any registers except the status register until this bit is cleared. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci: Wait for host to start running.Sarah Sharp2010-07-051-7/+32
| | | | | | | | | | | | | | commit ed07453fd356025cc25272629e982f5e4607632c upstream. When the run bit is set in the xHCI command register, it may take a few microseconds for the host to start running. We cannot ring any doorbells until the host is actually running, so wait until the status register says the host is running. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Shinya Saito <shinya.saito.sx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: mos7840: fix null-pointer dereferenceJohan Hovold2010-07-051-1/+0
| | | | | | | | | | commit b41709f1263bb1ad37efc43fea0bb0b670c12e78 upstream. Fix null-pointer dereference on error path. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drm/i915: Rebind bo if currently bound with incorrect alignment.Chris Wilson2010-07-051-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | commit ac0c6b5ad3b3b513e1057806d4b7627fcc0ecc27 upstream. Whilst pinning the buffer, check that that its current alignment matches the requested alignment. If it does not, rebind. This should clear up any final render errors whilst resuming, for reference: Bug 27070 - [i915] Page table errors with empty ringbuffer https://bugs.freedesktop.org/show_bug.cgi?id=27070 Bug 15502 - render error detected, EIR: 0x00000010 https://bugzilla.kernel.org/show_bug.cgi?id=15502 Bug 13844 - i915 error: "render error detected" https://bugzilla.kernel.org/show_bug.cgi?id=13844 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* sata_via: magic vt6421 fix for transmission problems w/ WD drivesTejun Heo2010-07-051-0/+13
| | | | | | | | | | | | | | | | | | | | commit 8b27ff4cf6d15964aa2987aeb58db4dfb1f87a19 upstream. vt6421 has problems talking to recent WD drives. It causes a lot of transmission errors while high bandwidth transfer as reported in the following bugzilla entry. https://bugzilla.kernel.org/show_bug.cgi?id=15173 Joseph Chan provided the following fix. I don't have any idea what it does but I can verify the issue is gone with the patch applied. Signed-off-by: Tejun Heo <tj@kernel.org> Originally-from: Joseph Chan <JosephChan@via.com.tw> Reported-by: Jorrit Tijben <sjorrit@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* sata_nv: don't diddle with nIEN on mcp55Tejun Heo2010-07-051-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | commit f3faf8fc3fab45c3526efe8c9e99bb23f8723350 upstream. On mcp55, nIEN gets stuck once set and liteon blueray rom iHOS104-08 violates ATA specification and fails to set I on D2H Reg FIS if nIEN is set when the command was issued. When the other party is following the spec, both devices can work fine but when the two flaws are put together, they can't talk to each other. mcp55 has its own IRQ masking mechanism and there's no reason to mess with nIEN in the first place. Fix it by dropping nIEN diddling from nv_mcp55_freeze/thaw(). This was originally reported by Cengiz. Although Cengiz hasn't verified the fix yet, I could reproduce this problem and verfiy the fix. Even if Cengiz is experiencing different or additional problems, this patch is needed. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Cengiz Günay <cgunay@emory.edu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* firewire: core: check for 1394a compliant IRM, fix inaccessibility of Sony ↵Stefan Richter2010-07-051-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | camcorder commit 10389536742cefbedecb67a5b2906f155cf3a1c3 upstream. Per IEEE 1394 clause 8.4.2.3, a contender for the IRM role shall check whether the current IRM complies to 1394a-2000 or later. If not force a compliant node (e.g. itself) to become IRM. This was implemented in the older ieee1394 driver but not yet in firewire-core. An older Sony camcorder (Sony DCR-TRV25) which implements 1394-1995 IRM but neither 1394a-2000 IRM nor BM was now found to cause an interoperability bug: - Camcorder becomes root node when plugged in, hence gets IRM role. - firewire-core successfully contends for BM role, proceeds to perform gap count optimization and resets the bus. - Sony camcorder ignores presence of a BM (against the spec, this is a firmware bug), performs its idea of gap count optimization and resets the bus. - Preceding two steps are repeated endlessly, bus never settles, regular I/O is practically impossible. http://thread.gmane.org/gmane.linux.kernel.firewire.user/3913 This is an interoperability regression from the old to the new drivers. Fix it indirectly by adding the 1394a IRM check. The spec suggests three and a half methods to determine 1394a compliance of a remote IRM; we choose the method of testing the Config_ROM.Bus_Info.generation field. This is data that firewire-core should have readily available at this point, i.e. does not require extra I/O. Reported-by: Clemens Ladisch <clemens@ladisch.de> (missing 1394a check) Reported-by: H. S. <hs.samix@gmail.com> (issue with Sony DCR-TRV25) Tested-by: H. S. <hs.samix@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ahci: add pci quirk for JMB362Tejun Heo2010-07-051-1/+4
| | | | | | | | | | | | | | | commit 4daedcfe8c6851aa01cc1997220f2577f4039c13 upstream. JMB362 is a new variant of jmicron controller which is similar to JMB360 but has two SATA ports instead of one. As there is no PATA port, single function AHCI mode can be used as in JMB360. Add pci quirk for JMB362. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath5k: retain promiscuous settingBob Copeland2010-07-051-1/+3
| | | | | | | | | | | | | | | | | | | | commit 6b5dcccb495b66b3b0b9581cdccfed038e5d68a2 upstream. Commit 56d1de0a21db28e41741cfa0a66e18bc8d920554, "ath5k: clean up filter flags setting" introduced a regression in monitor mode such that the promisc filter flag would get lost. Although we set the promisc flag when it changed, we did not preserve it across subsequent calls to configure_filter. This patch restores the original functionality. Bisected-by: weedy2887@gmail.com Tested-by: weedy2887@gmail.com Tested-by: Rick Farina <sidhayn@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* clocksource: sh_cmt: compute mult and shift before registrationPaul Mundt2010-07-051-9/+12
| | | | | | | | | | | | | commit f4d7c3565c1692c54d9152b52090fe73f0029e37 upstream. Based on the sh_tmu change in 66f49121ffa41a19c59965b31b046d8368fec3c7 ("clocksource: sh_tmu: compute mult and shift before registration"). The same issues impact the sh_cmt driver, so we take the same approach here. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* clocksource: sh_tmu: compute mult and shift before registrationAurelien Jarno2010-07-051-9/+11
| | | | | | | | | | | | | | | | | | commit 66f49121ffa41a19c59965b31b046d8368fec3c7 upstream. Since commit 98962465ed9e6ea99c38e0af63fe1dcb5a79dc25 ("nohz: Prevent clocksource wrapping during idle"), the CPU of an R2D board never goes to idle. This commit assumes that mult and shift are assigned before the clocksource is registered. As a consequence the safe maximum sleep time is negative and the CPU never goes into idle. This patch fixes the problem by moving mult and shift initialization from sh_tmu_clocksource_enable() to sh_tmu_register_clocksource(). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Staging: comedi - correct parameter gainlkup for DAQCard-6024E in driver ↵Martin Homuth-Rosemann2010-07-051-1/+1
| | | | | | | | | | | | | | ni_mio_cs.c commit ebe8622342f12bed387f7de4b5fb7c52005ccb29 upstream. Correct at least one of the incorrect specs for a national instrument data acquisition card DAQCard-6024E. This card has only four different gain settings (+-10V, +-5V, +-0.5V, +-0.05V). Signed-off-by: Martin Homuth-Rosemann <homuth-rosemann@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* xen: avoid allocation causing potential swap activity on the resume pathIan Campbell2010-07-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | commit b3831cb55d383e8eb55d3b56c715fb48459b87c9 upstream. Since the device we are resuming could be the device containing the swap device we should ensure that the allocation cannot cause IO. On resume, this path is triggered when the running system tries to continue using its devices. If it cannot then the resume will fail; to try to avoid this we let it dip into the emergency pools. The majority of these changes were made when linux-2.6.18-xen.hg changeset e8b49cfbdac0 was ported upstream in a144ff09bc52ef3f3684ed23eadc9c7c0e57b3aa but somehow this hunk was dropped. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ipmi: handle run_to_completion properly in deliver_recv_msg()Jiri Kosina2010-07-051-3/+8
| | | | | | | | | | | | | | | | commit a747c5abc329611220f16df0bb4cf0ca4a7fdf0c upstream. If run_to_completion flag is set, it means that we are running in a single-threaded mode, and thus no locks are held. This fixes a deadlock when IPMI notifier is being called during panic. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (ltc4245) Read only one GPIO pinIra W. Snyder2010-07-051-13/+5
| | | | | | | | | | | | | | | | commit df16dd53c575d0cb9dbee20a3149927c862a9ff6 upstream. Read only one of the GPIO pins as an analog voltage. The ADC can be switched to a different GPIO pin at runtime, but this is not supported. Previously, this driver would report the analog voltage of the currently selected GPIO pin as all three GPIO voltages: in9_input, in10_input and in11_input. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drm/radeon: fix the r100/r200 ums block 0 page fixDave Airlie2010-07-051-2/+3
| | | | | | | | | | | | | commit cf22f20ade30f8c03955324aaf27b1049e182600 upstream. airlied -> brown paper bag. I blame Hi-5 or the Wiggles for lowering my IQ, move the fix inside some brackets instead of breaking everything in site. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page ↵Dave Airlie2010-07-053-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and beyond commit 566d84d172161cb6c0c4dd834c34abbac6bf7b38 upstream. radeon's have a special ability to passthrough writes in their internal memory space directly to PCI, this ability means that if some of the internal surfaces like the depth buffer point at 0x0, any writes to these will go directly to RAM at 0x0 via PCI busmastering. Now mesa used to always emit clears after emitting state, since the radeon mesa driver was refactored a year or more ago, it was found it could generate a clear request without ever sending any setup state to the card. So the clear would attempt to clear the depth buffer at 0x0, which would overwrite main memory at this point. fs corruption ensues. Also once one app did this correctly, it would never get set back to 0 making this messy to reproduce. The kernel should block this from happening as mesa runs without privs, though it does require the user be connected to the current running X session. This patch implements a check to make sure the depth offset has been set before a depth clear occurs and if it finds one it prints a warning and ignores the depth clear request. There is also a mesa fix to avoid sending the badness going into mesa. This only affects r100/r200 GPUs in user modesetting mode. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* mlx4_core: Fix possible chunk sg list overflow in mlx4_alloc_icm()Sebastien Dugue2010-07-051-1/+2
| | | | | | | | | | | | | | | | | commit c0dc72bad9cf21071f5e4005de46f7c8b67a138a upstream. If the number of sg entries in the ICM chunk reaches MLX4_ICM_CHUNK_LEN, we must set chunk to NULL even for coherent mappings so that the next time through the loop will allocate another chunk. Otherwise we'll overflow the sg list the next time through the loop. This will lead to memory corruption if this case is hit. mthca does not have this bug. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* md: manage redundancy group in sysfs when changing level.NeilBrown2010-07-053-13/+38
| | | | | | | | | | | | | | | | | | | | | | | | commit a64c876fd357906a1f7193723866562ad290654c upstream. Some levels expect the 'redundancy group' to be present, others don't. So when we change level of an array we might need to add or remove this group. This requires fixing up the current practice of overloading ->private to indicate (when ->pers == NULL) that something needs to be removed. So create a new ->to_remove to fill that role. When changing levels, we may need to add or remove attributes. When changing RAID5 -> RAID6, we both add and remove the same thing. It is important to catch this and optimise it out as the removal is delayed until a lock is released, so trying to add immediately would cause problems. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rtc: s3c: initialize driver data before using itMaurus Cuelenaere2010-07-051-2/+3
| | | | | | | | | | | | | | | | commit e893de59a4982791368b3ce412bc67dd601a88a0 upstream. s3c_rtc_setfreq() uses the platform driver data to derive struct rtc_device, so make sure drvdata is set _before_ s3c_rtc_setfreq() is called. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rtc-cmos: do dev_set_drvdata() earlier in the initializationDan Carpenter2010-07-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6ba8bcd457d9fc793ac9435aa2e4138f571d4ec5 upstream. The bug is an oops when dev_get_drvdata() returned null in cmos_update_irq_enable(). The call tree looks like this: rtc_dev_ioctl() => rtc_update_irq_enable() => cmos_update_irq_enable() It's caused by a race condition in the module initialization. It is rtc_device_register() which makes the ioctl operations live so I moved the call to dev_set_drvdata() before the call to rtc_device_register(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15963 Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Malte Schroder <maltesch@gmx.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* md: set mddev readonly flag on blkdev BLKROSET ioctlDan Williams2010-07-051-0/+29
| | | | | | | | | | | | | | | | | | commit e2218350465e7e0931676b4849b594c978437bce upstream. When the user sets the block device to readwrite then the mddev should follow suit. Otherwise, the BUG_ON in md_write_start() will be set to trigger. The reverse direction, setting mddev->ro to match a set readonly request, can be ignored because the blkdev level readonly flag precludes the need to have mddev->ro set correctly. Nevermind the fact that setting mddev->ro to 1 may fail if the array is in use. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* md: remove unneeded sysfs files more promptlyNeilBrown2010-07-051-10/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit b6eb127d274385d81ce8dd45c98190f097bce1b4 upstream. When an array is stopped we need to remove some sysfs files which are dependent on the type of array. We need to delay that deletion as deleting them while holding reconfig_mutex can lead to deadlocks. We currently delay them until the array is completely destroyed. However it is possible to deactivate and then reactivate the array. It is also possible to need to remove sysfs files when changing level, which can potentially happen several times before an array is destroyed. So we need to delete these files more promptly: as soon as reconfig_mutex is dropped. We need to ensure this happens before do_md_run can restart the array, so we use open_mutex for some extra locking. This is not deadlock prone. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* md/linear: avoid possible oops and array stopNeilBrown2010-07-051-0/+1
| | | | | | | | | | | | | | | | | commit ef2f80ff7325b2c1888ff02ead28957b5840bf51 upstream. Since commit ef286f6fa673cd7fb367e1b145069d8dbfcc6081 it has been important that each personality clears ->private in the ->stop() function, or sets it to a attribute group to be removed. linear.c doesn't. This can sometimes lead to an oops, though it doesn't always. Suitable for 2.6.33-stable and 2.6.34. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* md: Fix read balancing in RAID1 and RAID10 on drives > 2TBNeilBrown2010-07-052-3/+3
| | | | | | | | | | | | | | | commit af3a2cd6b8a479345786e7fe5e199ad2f6240e56 upstream. read_balance uses a "unsigned long" for a sector number which will get truncated beyond 2TB. This will cause read-balancing to be non-optimal, and can cause data to be read from the 'wrong' branch during a resync. This has a very small chance of returning wrong data. Reported-by: Jordan Russell <jr-list-2010@quo.to> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* md/raid1: fix counting of write targets.NeilBrown2010-07-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | commit 964147d5c86d63be79b442c30f3783d49860c078 upstream. There is a very small race window when writing to a RAID1 such that if a device is marked faulty at exactly the wrong time, the write-in-progress will not be sent to the device, but the bitmap (if present) will be updated to say that the write was sent. Then if the device turned out to still be usable as was re-added to the array, the bitmap-based-resync would skip resyncing that block, possibly leading to corruption. This would only be a problem if no further writes were issued to that area of the device (i.e. that bitmap chunk). Suitable for any pending -stable kernel. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drm/radeon/kms/atom: fix typo in LVDS panel info parsingAlex Deucher2010-07-051-1/+1
| | | | | | | | | | | | commit 1ff26a3604d0292988d4cade0e49ba9918dbfd46 upstream. Fixes LVDS issues on some laptops; notably laptops with 2048x1536 panels. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drm/radeon/kms: reset ddc_bus in object header parsingAlex Deucher2010-07-051-3/+2
| | | | | | | | | | | | | | commit 2bfcc0fc698d550689ef020c73b2d977b73e728c upstream. Some LVDS connectors don't have a ddc bus, so reset the ddc bus to invalid before parsing the next connector to avoid using stale ddc bus data. Should fix fdo bug 28164. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drm/edid: Fix 1024x768@85HzAdam Jackson2010-07-051-1/+1
| | | | | | | | | | | | | commit 61dd98fad58f945ed720ba132681acb58fcee015 upstream. Having hsync both start and end on pixel 1072 ain't gonna work very well. Matches the X server's list. Signed-off-by: Adam Jackson <ajax@redhat.com> Tested-By: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Disable MSI for MCP55 on P5N32-E SLIBen Hutchings2010-07-051-3/+4
| | | | | | | | | | | | | | commit e4146bb9088c01c8b6e82be11f0c371f8aff023c upstream. As reported in <http://bugs.debian.org/552299>, MSI appears to be broken for this on-board device. We already have a quirk for the P5N32-SLI Premium; extend it to cover both variants of the board. Reported-by: Romain DEGEZ <romain.degez@smartjog.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI quirks: disable msi on AMD rs4xx internal gfx bridgesAlex Deucher2010-07-051-0/+1
| | | | | | | | | | | | commit 9313ff450400e6a2ab10fe6b9bdb12a828329410 upstream. Doesn't work reliably for internal gfx. Fixes kernel bug https://bugzilla.kernel.org/show_bug.cgi?id=15626. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI quirk: Disable MSI on VIA K8T890 systemsMatthew Wilcox2010-07-051-0/+1
| | | | | | | | | | | | | | | commit 134b345081534235dbf228b1005c14590e0570ba upstream. Bugzilla 15287 indicates that there's a problem with Message Signalled Interrupts on VIA K8T890 systems. Add a quirk to disable MSI on these systems. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Jan Kreuzer <kontrollator@gmx.de> Tested-by: lh <jarryson@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* can: Fix SJA1000 command register writes on SMP systemsOliver Hartkopp2010-07-052-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 57c8a456640fa3ca777652f11f2db4179a3e66b6 upstream. The SJA1000 command register is concurrently written in the rx-path to free the receive buffer _and_ in the tx-path to start the transmission. The SJA1000 data sheet, 6.4.4 COMMAND REGISTER (CMR) states: "Between two commands at least one internal clock cycle is needed in order to proceed. The internal clock is half of the external oscillator frequency." On SMP systems the current implementation leads to a write stall in the tx-path, which can be solved by adding some general locking and some time to settle the write_reg() operation for the command register. Thanks to Klaus Hitschler for the original fix and detailed problem description. This patch applies on net-2.6 and (with some offsets) on net-next-2.6 . Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers/base/cpu.c: fix the output from /sys/devices/system/cpu/offlineJan Beulich2010-07-051-1/+1
| | | | | | | | | | | | | | | commit cdc6e3d3968052cebb2f2ddcd742bff29fbd1a90 upstream. Without CONFIG_CPUMASK_OFFSTACK, simply inverting cpu_online_mask leads to CPUs beyond nr_cpu_ids to be displayed twice and CPUs not even possible to be displayed as offline. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drm/i915: Reject bind_to_gtt() early if object > apertureChris Wilson2010-07-051-0/+8
| | | | | | | | | | | | | | commit 654fc6073f68efa3b6c466825749e73e7fbb92cd upstream. If the object is bigger than the entire aperture, reject it early before evicting everything in a vain attempt to find space. v2: Use E2BIG as suggested by Owain G. Ainsworth. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drm/i915: Fix 82854 PCI ID, and treat it like other 85XAdam Jackson2010-07-052-3/+5
| | | | | | | | | | | commit 5ce8ba7c9279a63f99e1f131602580472b8af968 upstream. pci.ids and the datasheet both say it's 358e, not 35e8. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath5k: consistently use rx_bufsize for RX DMABruno Randolf2010-07-051-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | commit b5eae9ff5ba6d76de19286dd6429acd7cde3f79d upstream. We should use the same buffer size we set up for DMA also in the hardware descriptor. Previously we used common->rx_bufsize for setting up the DMA mapping, but used skb_tailroom(skb) for the size we tell to the hardware in the descriptor itself. The problem is that skb_tailroom(skb) can give us a larger value than the size we set up for DMA before. This allows the hardware to write into memory locations not set up for DMA. In practice this should rarely happen because all packets should be smaller than the maximum 802.11 packet size. On the tested platform rx_bufsize is 2528, and we allocated an skb of 2559 bytes length (including padding for cache alignment) but sbk_tailroom() was 2592. Just consistently use rx_bufsize for all RX DMA memory sizes. Also use the return value of the descriptor setup function. Signed-off-by: Bruno Randolf <br1@einfach.org> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xHCI: Fix wrong usage of macro TRB_TYPEAndiry Xu2010-07-051-4/+7
| | | | | | | | | | | | commit 54b5acf3acb7a1f83ec281d111d3e2812cd7ad9d upstream. Macro TRB_TYPE is misused in some places. Fix the wrong usage. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci: Fix check for room on the ring.Sarah Sharp2010-07-051-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 44ebd037c54f80db3121ac9f5fe6e677b76e11d5 upstream. The length of the scatter gather list a driver can enqueue is limited by the bus' sg_tablesize to 62 entries. Each entry will be described by at least one transfer request block (TRB). If the entry's buffer crosses a 64KB boundary, then that entry will have to be described by two or more TRBs. So even if the USB device driver respects sg_tablesize, the whole scatter list may take more than 62 TRBs to describe, and won't fit on the ring. Don't assume that an empty ring means there is enough room on the transfer ring. The old code would unconditionally queue this too-large transfer, and over write the beginning of the transfer. This would mean the cycle bit was unchanged in those overwritten transfers, causing the hardware to think it didn't own the TRBs, and the host would seem to hang. Now drivers may see submit_urb() fail with -ENOMEM if the transfers are too big to fit on the ring. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci: Limit bus sg_tablesize to 62 TRBs.Sarah Sharp2010-07-051-1/+1
| | | | | | | | | | | | | | | commit bc88d2eba5e19d10dd546e428314909d889b3b6a upstream. When a scatter-gather list is enqueued to the xHCI driver, it translates each entry into a transfer request block (TRB). Only 63 TRBs can be used per ring segment, and there must be one additional TRB reserved to make sure the hardware does not think the ring is empty (so the enqueue pointer doesn't equal the dequeue pointer). Limit the bus sg_tablesize to 62 TRBs. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2024-06-14 10:55:58 +0000