summaryrefslogtreecommitdiffstats
path: root/drivers/serial
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] Serial: Split 8250 port table (part 2)Russell King2005-06-292-2/+2
| | | | | | | | | | | | Remove legacy ISA serial ports for Accent, Boca, Fourport, Hub6 and MCA from the architecture specific serial.h include. The only ports which remain in asm-*/serial.h are the platform specific entries. These should really be converted by platform maintainers to use a platform device, such as can be found in arch/arm/mach-footbridge/isa.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] Serial: Disable OX950 transmitter for flow controlRussell King2005-06-291-12/+16
| | | | | | | | | Disable the transmitter whenever we want to prevent characters being transmitted by flow control. However, if we run out of characters to send and want to only disable the TX interrupt, allow that scenario. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] Serial: Check status of CTS when using flow controlRussell King2005-06-291-0/+17
| | | | | | | | | Fix bugme #4712: read the CTS status and set hw_stopped if CTS is not active when opening the port and/or enabling CRTSCTS Thanks to Stefan Wolff for spotting this problem. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] Serial: Adjust serial lockingRussell King2005-06-2911-39/+27
| | | | | | | | This patch changes the way serial ports are locked when getting modem status. This change is necessary because we will need to atomically read the modem status and take action depending on the CTS status. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] pcmcia: more IDs for TDK multifunction cardsJun Komuro2005-06-271-0/+2
| | | | | | | | | | Add new pcmcia id_table for fmvj18x_cs and serial_cs. (TDK multi-function card (NetPartner9610 and MobileNetworker3200)) Signed-off-by: Jun Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pcmcia: id_table for serial_csDominik Brodowski2005-06-271-0/+104
| | | | | | | | Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Serial: Split 8250 port tableRussell King2005-06-278-32/+356
| | | | | | | | | | | | | | Add separate files for the different 8250 ISA-based serial boards. Looking across all the various architectures, it seems reasonable that we can key the availability of the configuration options for these beasts to the bus-related symbols (iow, CONFIG_ISA). We also standardise the base baud/uart clock rate for these boards - I'm sure that isn't architecture specific, but is solely dependent on the crystal fitted on the board (which should be the same no matter what type of machine its fitted into.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] Serial: Remove {un,}register_serial from 68328serial.cRussell King2005-06-271-17/+0
| | | | | | | | | 68328serial.c does not make use of register_serial/unregister_serial, which is traditionally used to register 8250-compatible UARTs with the 8250-compatible serial driver. Acked-by: David McCullough Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] serial/68328serial: replace schedule_timeout() with ↵Nishanth Aravamudan2005-06-251-5/+4
| | | | | | | | | | | | | msleep_interruptible() Use msleep_interruptible() instead of schedule_timeout() in send_break() to guarantee the task delays as expected. Change @duration's units to milliseconds, and modify arguments in callers appropriately. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] serial/68360serial: replace schedule_timeout() with ↵Nishanth Aravamudan2005-06-251-5/+4
| | | | | | | | | | | | | msleep_interruptible() Use msleep_interruptible() instead of schedule_timeout() in send_break() to guarantee the task delays as expected. Change @duration's units to milliseconds, and modify arguments in callers appropriately. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] serial/icom: Remove custom msescs_to_jiffies() macroDomen Puncer2005-06-251-2/+0
| | | | | | | | | | Remove the MSECS_TO_JIFFIES() macro because msescs_to_jiffies() from jiffies.h should be used. The macro isn't referenced anywhere anyway. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] compilation errors in drivers/serial/mpsc.cLee Nicks2005-06-251-4/+4
| | | | | | | | The following patch fix gcc 4 compilation errors in drivers/serial/mpsc.c Signed-off-by: Lee Nicks <allinux@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SPARC]: sunzilog warning fixesWilliam Lee Irwin III2005-06-241-4/+4
| | | | | | | | | | From: William Lee Irwin III <wli@holomorphy.com> This small patch silences some iomem-related warnings in sunzilog.c by declaring mapped_addr as void __iomem * and inserting a cast in one case. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] Serial: Eliminate magic numbersRussell King2005-06-244-20/+20
| | | | | | | | Use the existing macros instead. Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2005-06-231-2/+2
|\
| * [PATCH] ARM: 2728/1: S3C2410 - fix constant warning on serial device nameBen Dooks2005-06-231-2/+2
| | | | | | | | | | | | | | | | | | Patch from Ben Dooks Remove warning of casting `const char *` to a `char *` type. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2005-06-232-10/+47
|\ \
| * | [PATCH] Serial: Bugs are not capabilitiesRussell King2005-06-231-4/+4
| | | | | | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [PATCH] Serial: Mobility's 16550A ports need a helping handRussell King2005-06-232-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | The Mobility 16550A serial ports don't behave the same as standard 16550A ports, and need a helping hand to get them going once the transmitter has drained and been disabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [PATCH] Serial: Convert 8250 revision-based bug fixes to bug bitmaskRussell King2005-06-232-10/+15
| |/ | | | | | | | | | | | | | | | | For some 8250 port types, we used to check the type of the port, and then determine whether the chip revision means the device is buggy. Instead, introduce a bit array, and set the appropriate bit(s) when we discover a buggy device. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* / [PATCH] Altix: shut off xmit intr if done xmittingPat Gefre2005-06-231-0/+1
|/ | | | | | | | Small mod to shut off the xmit interrupt if we have nothing to transmit. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ioc4: PCI bus speed detectionBrent Casavant2005-06-211-13/+18
| | | | | | | | | | | | Several hardware features of SGI's IOC4 I/O controller chip require timing-related driver calculations dependent upon the PCI bus speed. This patch enables the core IOC4 driver code to detect the actual bus speed and store a value that can later be used by the IOC4 subdrivers as needed. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Pat Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ioc4: CONFIG splitBrent Casavant2005-06-212-1/+10
| | | | | | | | | | | | | | | | The SGI IOC4 I/O controller chip drivers are currently all configured by CONFIG_BLK_DEV_SGIIOC4. This is undesirable as not all IOC4 hardware features are needed by all systems. This patch adds two configuration variables, CONFIG_SGI_IOC4 for core IOC4 driver support (see patch 1/3 in this series for further explanation) and CONFIG_SERIAL_SGI_IOC4 to independently enable serial port support. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Pat Gefre <pfg@sgi.com> Acked-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ioc4: Core driver rewriteBrent Casavant2005-06-211-182/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This series of patches reworks the configuration and internal structure of the SGI IOC4 I/O controller device drivers. These changes are motivated by several factors: - The IOC4 chip PCI resources are of mixed use between functions (i.e. multiple functions are handled in the same address range, sometimes within the same register), muddling resource ownership and initialization issues. Centralizing this ownership in a core driver is desirable. - The IOC4 chip implements multiple functions (serial, IDE, others not yet implemented in the mainline kernel) but is not a multifunction PCI device. In order to properly handle device addition and removal as well as module insertion and deletion, an intermediary IOC4-specific driver layer is needed to handle these operations cleanly. - All IOC4 drivers are currently enabled by a single CONFIG value. As not all systems need all IOC4 functions, it is desireable to enable these drivers independently. - The current IOC4 core driver will trigger loading of all function-level drivers, as it makes direct calls to them. This situation should be reversed (i.e. function-level drivers cause loading of core driver) in order to maintain a clear and least-surprise driver loading model. - IOC4 hardware design necessitates some driver-level dependency on the PCI bus clock speed. Current code assumes a 66MHz bus, but the speed should be autodetected and appropriate compensation taken. This patch series effects the above changes by a newly and better designed IOC4 core driver with which the function-level drivers can register and deregister themselves upon module insertion/removal. By tracking these modules, device addition/removal is also handled properly. PCI resource management and ownership issues are centralized in this core driver, and IOC4-wide configuration actions such as bus speed detection are also handled in this core driver. This patch: The SGI IOC4 I/O controller chip implements multiple functions, though it is not a multi-function PCI device. Additionally, various PCI resources of the IOC4 are shared by multiple hardware functions, and thus resource ownership by driver is not clearly delineated. Due to the current driver design, all core and subordinate drivers must be loaded, or none, which is undesirable if not all IOC4 hardware features are being used. This patch reorganizes the IOC4 drivers so that the core driver provides a subdriver registration service. Through appropriate callbacks the subdrivers can now handle device addition and removal, as well as module insertion and deletion (though the IOC4 IDE driver requires further work before module deletion will work). The core driver now takes care of allocating PCI resources and data which must be shared between subdrivers, to clearly delineate module ownership of these items. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Pat Gefre <pfg@sgi.com Acked-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ppc64 iSeries: allow build with no PCIStephen Rothwell2005-06-211-1/+1
| | | | | | | | | This patch allows iSeries to build with CONFIG_PCI=n. This is useful for partitions that have only virtual I/O. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpm_uart: Route SCC2 pins for the STx GP3 boardMatt Porter2005-06-211-0/+9
| | | | | | | | | Adds SCC2 pin routing specific to the GP3 board. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Serial: remove unused variable in sa1100 driverRussell King2005-06-081-1/+1
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] serial: update NEC VR4100 series serial supportYoichi Yuasa2005-06-041-57/+9
| | | | | | | | | | | | | | | | | | | | | - Changed the return value of unknown type to NULL. - Deleted the NULL check of dev_id in siu_interrupt(). - Deleted the NULL check of port->membase in siu_shutdown(). - Added the NULL check of port->membase to siu_startup(). - Removed early_uart_ops. Now using vr41xx_siu standerd one. - Changed KSEG1ADDR() in siu_console_setup() to ioremap(). - When uart_add_one_port() failed, changed to set NULL to port->dev. Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* When we detect that a 16550 was in fact part of a NatSemi SuperIO chipDavid Woodhouse2005-05-211-5/+12
| | | | | | | | | | with high-speed mode enabled, we switch it to high-speed mode so that baud_base becomes 921600. However, we also need to multiply the baud divisor by 8 at the same time, in case it's already in use as a console. Signed-off-by: David Woodhouse Acked-by: Tom Rini Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Automatic merge of ↵Linus Torvalds2005-05-192-38/+72
|\ | | | | | | rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git/
| * [SUNSAB]: Defer register updates until transmitter is idle.David S. Miller2005-05-112-38/+72
| | | | | | | | | | | | | | The chip can emit garbage characters if we touch the settings while characters are going out. Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] serial_cs device identification fixPetr Vandrovec2005-05-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | serial_cs's vendor/device identification got broken by Yum Rayan's change '[PATCH] serial_cs: Reduce stack usage in serial_event()' - it changed buf type from u_short* to char*, breaking device manufacturer & card number retrieval. Due to this my modem stopped from being recognized as special case. Code will work much better if we'll rely on first_tuple's parser instead of doing parse ourselves. Code also looks simpler after change. Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Serial: Add uart_insert_char()Russell King2005-05-0911-110/+22
|/ | | | | | | | Add uart_insert_char(), which handles inserting characters into the flip buffer. This helper function handles the correct semantics for handling overrun in addition to inserting normal characters. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
* [PATCH] 8250_pci.c: add comment about enum sorting orderRussell King2005-05-061-0/+2
| | | | Signed-off-by: Russell King <rmk@arm.linux.org.uk>
* [PATCH] make lots of things staticAdrian Bunk2005-05-014-4/+5
| | | | | | | | Another large rollup of various patches from Adrian which make things static where they were needlessly exported. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Altix ioc4 serial - Arm the read timeout timer before the first readPatrick Gefre2005-05-011-1/+1
| | | | | | | | Arm the read timeout timer before the first read. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Altix ioc4 serial - small uart setup modsPatrick Gefre2005-05-011-20/+8
| | | | | | | | Small mods for setting up the uart - parity, flow control Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Altix ioc4 serial - set a better timeout/thresholdPatrick Gefre2005-05-011-4/+7
| | | | | | | | Set the timeout and threshold to better values. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Altix ioc4 serial - set hfc from ioctlPatrick Gefre2005-05-011-7/+4
| | | | | | | | Allow hardware flow control to be set from an ioctl. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] serial_cs: Reduce stack usage in serial_event()Yum Rayan2005-05-011-61/+112
| | | | | | | | | | | | | This patch reduces the stack usage of the function serial_event() in serial_cs from 2212 to 228. I used a patched version of gcc 3.4.3 on i386 with -fno-unit-at-a-time disabled. This patch is only compile tested. Acked-by: Randy Dunlap <rddunlap@osdl.org> Signed-off-by: Yum Rayan <yum.rayan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sn_console: make sal_console_uart static againAndreas Schwab2005-05-011-2/+2
| | | | | | Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ARM: 2654/1: i.MX UART initialization sets and honors UFCR valueSascha Hauer2005-04-291-8/+60
| | | | | | | | | | | | | | | Patch from Sascha Hauer This patch adds UCFR_RFDIV setting into i.MX serial driver. This is required, if loader does not fully agree with Linux kernel about UART setup manner. Linux only blindly expected some values until now. This should enable to use even serial ports not recognized by boot-loader as for example third UART found in the bluethoot module. Patch also enables to detect original setup baudrate in more cases. Signed-off-by: Pavel Pisa Signed-off-by: Sascha Hauer Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] Serial: Convert 8250_hp300 to use serial8250_{un,}register_portRussell King2005-04-261-26/+27
| | | | | | | | | Convert 8250_hp300 to use serial8250_register_port() and serial8250_unregister_port(). Tested by Kars de Jong, 4/4/2005. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
* [PATCH] Serial: Move error path processing inlineRussell King2005-04-262-79/+51
| | | | | | | With unlikely() there's no need for the error path to use gotos. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
* [PATCH] Serial: Ensure error paths are marked with unlikely()Russell King2005-04-266-6/+6
| | | | | | | Ensure ARM serial driver error paths are marked with the unlikely() compiler hint. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
* [PATCH] ppc annotations: mpscAl Viro2005-04-252-12/+12
| | | | | | | Usual iomem annotations + NULL noise removal. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SPARC64]: In sunsab driver, make sure to set the uart timeout.David S. Miller2005-04-211-5/+11
| | | | | | | This breaks serial consoles badly. Thanks to Eric Brower for tracking down the problem. Signed-off-by: David S. Miller <davem@davemloft.net>
* [SPARC64]: In sunsu driver, make sure to fully init chip for kbd/msDavid S. Miller2005-04-211-2/+9
| | | | | | | | | We were forgetting to call sunsu_change_speed(). The reason that replugging in the mouse cable "fixes things" is that causes a BREAK interrupt which in turn caused a call to sunsu_change_speed() which would get the chip setup properly. Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] serial: fix comments in 8250.cRussell King2005-04-161-3/+11
| | | | | | | | | | | | | | Fix the formatting of some comments in 8250.c, and add a note that the register_serial / unregister_serial shouldn't be used in new code. We do this here in preference to adding to linux/serial.h, since that is used by a number of non-8250 drivers which pretend to be 8250. It is not known whether it would be appropriate to do so. Signed-off-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix up newly added jsm driverChristoph Hellwig2005-04-163-311/+91
| | | | | | | | | | | | | | | | - plug various leaks and use after frees in the remove and initialization failure path (some still left) - remove useless global list of boards and use pci_set_drvdata instead - unobsfucate init path by merging functions together - kill various totally useless state variables - .. probably more I forgot Note that the tty part still generates lots of sparse warnings and there's still a totally useless layer of function pointer indirections, but maybe someone else will fix that bit up. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit (git 2.34.1) at 2024-11-12 20:57:34 +0000