summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
Commit message (Collapse)AuthorAgeFilesLines
...
| * [SCSI] megaraid_sas: make driver PCI legacy I/O port free driverNoriyuki Fujii2009-12-101-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the large servers, I/O port resource may not be assigned to all the PCI devices since it is limited (to 64KB on Intel Architecture[1]) and it may also be fragmented (I/O base register of PCI-to-PCI bridge will usually be aligned to a 4KB boundary[2]). If no I/O port resource is assigned to devices, those devices do not work. [1] Some machines support 64KB I/O port space per PCI segment. [2] Some P2P bridges support optional 1KB aligned I/O base. Therefore, I made a patch for MegaRAID SAS driver to make PCI legacy I/O port free. I have also tested the patch and it had no problem. The way to make PCI legacy I/O port free is the same as Fusion-MPT driver's and it has been merged into 2.6.30.4. This has already been fixed in e1000 and lpfc. As a result of the above, the driver can handle its device even when there are a huge number of PCI devices being used on the system and no I/O port region assigned to the device. Signed-off-by: Noriyuki Fujii <n-fujii@np.css.fujitsu.com> Acked-by: "Yang, Bo" <Bo.Yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] Correctly handle thin provisioning write errorMartin K. Petersen2009-12-101-0/+1
| | | | | | | | | | | | | | | | | | | | A thin provisioned device may temporarily be out of sufficient allocation units to fulfill a write request. In that case it will return a space allocation in progress error. Wait a bit and retry the write. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] sd: WRITE SAME(16) / UNMAP supportMartin K. Petersen2009-12-102-0/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | Implement a function for handling discard requests that sends either WRITE SAME(16) or UNMAP(10) depending on parameters indicated by the device in the block limits VPD. Extract unmap constraints and report them to the block layer. Based in part by a patch by Christoph Hellwig <hch@lst.de>. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] st: fix mdata->page_order handlingFUJITA Tomonori2009-12-102-11/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dio transfer always resets mdata->page_order to zero. It breaks high-order pages previously allocated for non-dio transfer. This patches adds reserved_page_order to st_buffer structure to save page order for non-dio transfer. http://bugzilla.kernel.org/show_bug.cgi?id=14563 When enlarge_buffer() allocates 524288 from 0, st uses six-order page allocation. So mdata->page_order is 6 and frp_seg is 2. After that, if st uses dio, sgl_map_user_pages() sets mdata->page_order to 0 for st_do_scsi(). After that, when we call normalize_buffer(), it frees only free frp_seg * PAGE_SIZE (2 * 4096) though we should free frp_seg * PAGE_SIZE << 6 (2 * 4096 << 6). So we see buffer_size is set to 516096 (524288 - 8192). Reported-by: Joachim Breuer <linux-kernel@jmbreuer.net> Tested-by: Joachim Breuer <linux-kernel@jmbreuer.net> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] be2iscsi: Adding support for various Async messages from chipJayamohan Kallickal2009-12-101-4/+8
| | | | | | | | | | | | | | | | | | | | | | This patch allows for future addition of various async messages from the chip. This ensures that the driver won't hit a BUG_ON if the Firmware used is newer than inbox driver and so is using latest async messages. Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] mvsas: add support for Adaptec ASC-1045/1405 SAS/SATA HBASrinivas2009-12-101-0/+1
| | | | | | | | | | | | | | | | | | This is support for Adaptec ASC-1045/1405 SAS/SATA HBA on mvsas, which is based on Marvell 88SE6440 chipset. Signed-off-by: Srinivas <satyasrinivasp@hcl.in> Cc: Andy Yan <ayan@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] pmcraid: support SMI-S object model of storage poolAnil Ravindranath2009-12-102-10/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PMC-Sierra mgmt application uses SMI-S model. According to SMI-S, the object model exposed by the SMI-S provider should show an StoragePool which contains member disks of a RAID Virtual disk and StorageVolume based on the StoragePool. But according to SMI-S, there is a possibility where StoragePool is created but StorageVolume is not yet created. To satisfy this scenario, we are trying a hidden RAID Virtual disk. The hidden RAID virtual disk will not be exposed to OS. Once a StorageVolume is created for this RAID virtual disk it is exposed. Signed-off-by: Anil Ravindranath<anil_ravindranath@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] fc class: fix fc_transport_init error handlingMike Christie2009-12-101-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | If transport_class_register fails we should unregister any registered classes, or we will leak memory or other resources. I did a quick modprobe of scsi_transport_fc to test the patch. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] mpt2sas: add missing initialization of scsih_cmdsKashyap, Desai2009-12-101-0/+5
| | | | | | | | | | | | | | | | Internal command scsih_cmds init is included in mpt2sas_base_attach. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] scsi_dh_rdac: Add two new IBM devices to rdac_dev_listMoger, Babu2009-12-101-0/+2
| | | | | | | | | | | | | | This patch adds two new IBM storage devices which can use rdac device handlers. Signed-off-by: Babu Moger <babu.moger@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] lpfc: fix hang on SGI ia64 platformMichael Reed2009-12-101-4/+12
| | | | | | | | | | | | | | | | | | | | | | In testing 2.6.31 on one of our ia64 platforms I've encountered a hang due to the driver using hardware ATEs which are a limited resource. This is because the driver does not set the dma consistent mask to 64 bits. Signed-off-by: Michael Reed <mdr@sgi.com> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | Subject: Re: [PATCH] strstrip incorrectly marked __must_checkKOSAKI Motohiro2009-12-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently, We marked strstrip() as must_check. because it was frequently misused and it should be checked. However, we found one exception. scsi/ipr.c intentionally ignore return value of strstrip. Because it wishes to keep the whitespace at the beginning. Thus we need to keep with and without checked whitespace trim function. This patch adds a new strim() and changes ipr.c to use it. [akpm@linux-foundation.org: coding-style fixes] Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/scsi/sym53c8xx_2/sym_glue.c: rename skip_spaces() to sym_skip_spaces()Andrew Morton2009-12-151-2/+2
|/ | | | | | | | | To avoid a collision with the newly-added kernel-wide skip_spaces(). Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-12-0940-86/+86
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
| * Merge branch 'for-next' into for-linusJiri Kosina2009-12-0740-86/+86
| |\ | | | | | | | | | | | | | | | Conflicts: kernel/irq/chip.c
| | * tree-wide: fix misspelling of "definition" in commentsAdam Buchbinder2009-12-045-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | "Definition" is misspelled "defintion" in several comments; this patch fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * tree-wide: fix assorted typos all over the placeAndré Goddard Rosa2009-12-0427-71/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * tree-wide: fix some typos and punctuation in commentsThadeu Lima de Souza Cascardo2009-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | fix some typos and punctuation in comments Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * tree-wide: fix typos "selct" + "slect" -> "select"Uwe Kleine-König2009-11-095-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch was generated by git grep -E -i -l 's(le|el)ct' | xargs -r perl -p -i -e 's/([Ss])(le|el)ct/$1elect/ with only skipping net/netfilter/xt_SECMARK.c and include/linux/netfilter/xt_SECMARK.h which have a struct member called selctx. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * tree-wide: fix a very frequent spelling mistakeDirk Hohndel2009-11-093-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | something-bility is spelled as something-blity so a grep for 'blit' would find these lines this is so trivial that I didn't split it by subsystem / copy additional maintainers - all changes are to comments The only purpose is to get fewer false positives when grepping around the kernel sources. Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2009-12-09183-5406/+24814
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (222 commits) [SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP [SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class [SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED [SCSI] zfcp: Update FSF error reporting [SCSI] zfcp: Improve ELS ADISC handling [SCSI] zfcp: Simplify handling of ct and els requests [SCSI] zfcp: Remove ZFCP_DID_MASK [SCSI] zfcp: Move WKA port to zfcp FC code [SCSI] zfcp: Use common code definitions for FC CT structs [SCSI] zfcp: Use common code definitions for FC ELS structs [SCSI] zfcp: Update FCP protocol related code [SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport [SCSI] zfcp: Assign scheduled work to driver queue [SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore [SCSI] zfcp: Implement module unloading [SCSI] zfcp: Merge trace code for fsf requests in one function [SCSI] zfcp: Access ports and units with container_of in sysfs code [SCSI] zfcp: Remove suspend callback [SCSI] zfcp: Remove global config_mutex [SCSI] zfcp: Replace local reference counting with common kref ...
| * | | [SCSI] libfc: add support of receiving ELS_RLSYi Zou2009-12-041-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upon receiving ELS_RLS, send the Link Error Status Block (LESB) back. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] fcoe, libfc: add get_lesb() to allow LLD to fill the link error ↵Yi Zou2009-12-041-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | status block (LESB) Add a member function pointer as get_lesb to libfc_function_template so LLD can fill the LESB based on its own statistics. For fcoe, it fills the LESB as a fcoe_fc_els_lesb struct according to FC-BB-5. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libfcoe: add tracking FIP Missing Discovery Advertisement countYi Zou2009-12-041-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add tracking the Missing Discovery Advertisement count for FIP Fiber Channel Forwarder (FCF) as described in FC-BB-5 Rev2.0 for LESB. The time is 1.5 times the FKA_ADV_PERIOD of the corresponding FCF. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libfcoe: add tracking FIP Virtual Link Failure countYi Zou2009-12-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add tracking the Virtual Link Failure count when either we have found the FCF as "aged" or we are receiving FIP Clear Virtual Link from the FCF. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libfcoe: add checking disable flag in FIP_FKA_ADVYi Zou2009-12-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the D bit is set if the FKA_ADV_Period of the FIP Discovery Advertisement, the ENode should not transmit period ENode FIP Keep Alive and VN_Port FIP Keep Alive (FC-BB-5 Rev2, 7.8.3.13). Note that fcf->flags is taken directly from the fip_header, I am claiming one bit for the purpose of the FIP_FKA_Period D bit as FIP_FL_FK_ADV_B, and use FIP_HEADER_FLAGS as bitmask for bits used in fip_header. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] fcoe: allow SCSI-FCP to be processed directly in softirq contextChris Leech2009-12-041-110/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow FCP frames to bypass the FCoE receive processing threads and handle them directly in softirq context, if they are received on the correct CPU. This preserves the queuing to threads for scaling out receive processing to multiple CPUs, but allows FCoE-aware multi-queue network drivers that direct frames to the originating CPUs to handle FCP processing with less scheduling latency. Only FCP is handled directly, because libfc makes use of mutexes in ELS handling routines. The bulk of this change is just moving the FCoE receive processing out of the receive thread function, leaving behind just the thread and queue management. The interesting bits are in fcoe_rcv() Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libfc: fix payload size passed to fc_frame_alloc() in ↵Yi Zou2009-12-041-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fc_lport_els_request Frame header room is already incluced, just pass the length of payload. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.6 : Update lpfc driver version to 8.3.6James Smart2009-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.6 : Hardware related fixes and changesJames Smart2009-12-045-104/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware related Fixes and Changes. - Added new Adapter IDs and update default Adapter names. - Added PCI read after EQarm doorbell PCI write to flush the write and avoid spurrious interrupts when in INTx mode. - Phase out use of ONLINE registers. - Fix for lost MSI interrupt Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.6 : Fix critical errorsJames Smart2009-12-043-13/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix errors relating to crashes and hangs. - Fix crash due to list corruption while unloading driver. - Fix panic during pci-hot-plug testing. - Fix panic when unmapping luns. - Fixed total_scsi_bufs counting could cause exhausted memory. - Fixed locking issue causing hang. - Fixed the call from lpfc_new_scsi_buf_s3 to use lpfc_release_scsi_buf_s3. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.6 : Fix AER issuesJames Smart2009-12-043-12/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix AER issues. - Made AER sysfs entry point return "Operation not permitted" to OneConnect HBAs - Stop and abort all I/Os on HBA for AER uncorrectable non-fatal error handling Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.6 : FC Protocol FixesJames Smart2009-12-0412-119/+235
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FC protocol fixes. - Fix send sequence logic to handle multi SGL IOCBs. - Fix FDISC completion always setting VPORT state to failed. - Ported the fix on reporting of max_vpi to uppper layer. - Fix incorrect number of Vports allowed to be created. - Fixed Dead FCoE port after creating vports. - Added handling of ELS request for Reinstate Recovery Qualifier (RRQ) - Handle unsolicited CT exchange initiator receiving CT exchange ABTS - Migrate LUN queue depth ramp up code to scsi mid-layer. - Made ABTS WQE go to the same WQ as the WQE to be aborted. - Fix Vport does not rediscover after FCF goes away. - Fixed lpfc_unreg_vfi failure after devloss timeout. - Fixed RPI bit leak. - Fix hbq pointer corruption during target discovery. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.6 : FCoE Protocol FixesJames Smart2009-12-0410-21/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCoE Protocol fixes. - Fixed FIP frame designation for ELS commands. - Fix CVL received on Port 1 not processed by driver. - Fix Zeroed frame on wire after FLOGI - Fix vport keep-alive does not contain the correct WWN. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] st: fix test of value range in st_set_options()Roel Kluin2009-12-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | value cannot logically be less than START and greater than BUFFERSIZE. #define EXTENDED_SENSE_START 18 // vi include/scsi/scsi_cmnd.h +105 #define SCSI_SENSE_BUFFERSIZE 96 [akpm@linux-foundation.org: fix warning] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] fix func names in kernel-docRandy Dunlap2009-12-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix scsi_devinfo.c kernel-doc function names to match actual function names. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libosd: Error handling revampedBoaz Harrosh2009-12-041-11/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Administer some love to the osd_req_decode_sense function * Fix a bad bug with osd_req_decode_sense(). If there was no scsi residual, .i.e the request never reached the target, then all the osd_sense_info members where garbage. * Add grossly missing in/out_resid to osd_sense_info and fill them in properly. * Define an osd_err_priority enum which divides the possible errors into 7 categories in ascending severity. Each category is also assigned a Linux return code translation. Analyze the different osd/scsi/block returned errors and set the proper osd_err_priority and Linux return code accordingly. * extra check a few situations so not to get stuck with inconsistent error view. Example an empty residual with an error code, and other places ... Lots of libosd's osd_req_decode_sense clients had this logic in some form or another. Consolidate all these into one place that should actually know about osd returns. Thous translating it to a more abstract error. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libosd: Bugfix of error handling in attributes-list decodingBoaz Harrosh2009-12-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an error was detected in an attribute list do to a target bug. We would print an error but spin endlessly regardless. Fix it. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libosd: bug in osd_req_decode_sense_full()Boaz Harrosh2009-12-041-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The (never tested) osd_sense_attribute_identification case has never worked. The loop was never advanced on. Fix it to work as intended. On 10/30/2009 04:39 PM, Roel Kluin wrote: I found this by code analysis, searching for while loops that test a local variable, but do not modify the variable. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libosd: osd_dev_info: Unique Identification of an OSD deviceBoaz Harrosh2009-12-042-9/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define an osd_dev_info structure that Uniquely identifies an OSD device lun on the network. The identification is built from unique target attributes and is the same for all network/SAN machines. osduld_info_lookup() - NEW New API that will lookup an osd_dev by its osd_dev_info. This is used by pNFS-objects for cross network global device identification. And by exofs multy-device support, the device info is specified in the on-disk exofs device table. osduld_device_info() - NEW Given an osd_dev handle returns its associated osd_dev_info. The ULD fetches this information at startup and hangs it on each OSD device. (This is a fast operation that can be called at any condition) osduld_device_same() - NEW With a given osd_dev at one hand and an osd_dev_info at another, we would like to know if they are the same device. Two osd_dev handles can be checked by: osduld_device_same(od1, osduld_device_info(od2)); osd_auto_detect_ver() - REVISED Now returns an osd_dev_info structure. Is only called once by ULD as before. See added comments for how to use. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] osduld: Use device->release instead of internal krefBoaz Harrosh2009-12-041-85/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The true logic of this patch will be clear in the next patch where we use the class_find_device() API. When doing so the use of an internal kref leaves us a narrow window where a find is started while the actual object can go away. Using the device's kobj reference solves this problem because now the same kref is used for both operations. (Remove and find) Core changes * Embed a struct device in uld_ structure and use device_register instead of devie_create. Set __remove to be the device release function. * __uld_get/put is just get_/put_device. Now every thing is accounted for on the device object. Internal kref is removed. * At __remove() we can safely de-allocate the uld_ structure. (The function has moved to avoid forward declaration) Some cleanups * Use class register/unregister is cleaner for this driver now. * cdev ref-counting games are no longer necessary I have incremented the device version string in case of new bugs. Note: Previous bugfix of taking the reference around fput() still applies. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] osduld: Ref-counting bug fixBoaz Harrosh2009-12-041-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If scsi has released the device (logout), and exofs has last reference on the osduld_device it will be freed by osd_uld_release() within the call to fput(). But this will oops in cdev_release() which is called after the fops->release. (cdev is embedded within osduld_device). __uld_get/put pair makes sure we have a cdev for the duration of fput() Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.5: Update the lpfc driver version to 8.3.5James Smart2009-12-041-2/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.5: fix fcp command polling, add FIP mode, performance ↵James Smart2009-12-0412-277/+307
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | optimisations and devloss timout fixes This patch includes the following changes: - Fixed Panic/Hang when using polling mode for fcp commands - Added support for Read_rev mbox bits indicating FIP mode of HBA - Optimize performance of slow-path handling of els responses - Add code to cleanup orphaned unsolicited receive sequences - Fixed Devloss timeout when multiple initiators are in same zone Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.5: Add AER supportJames Smart2009-12-044-24/+278
| | | | | | | | | | | | | | | | | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.5: fix sysfs parameters, vport creation and other bugs and ↵James Smart2009-12-0412-197/+214
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | update logging This patch include the following fixes and changes: - Fix crash when "error" is echoed to board_mode sysfs parameter - Fix FCoE Parameter parsing in regions 23 - Fix driver crash when creating vport with large number of targets on SLI4 - Fix bug with npiv message being logged when it is not supported by the adapter - Fix a potential dereferencing mailbox structure after free bug - Fix firmware crash after vport create with high target count - Error out requests to set board_mode to warm restart via sysfs on SLI4 HBAs - Fix Block guard logging - Fix a memory corruption issue during GID_FT IO prep - Fix crash while processing unsolicited FC frames - Fix failed to allocate XRI message is not a critical failure - Update and fix formatting in some log messages - Fix missing new line characters in log messages - Removed the use of the locally defined FC transport layer related macros - Check the rsplen in lpfc_handle_fcp_err function before using rsplen Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.5: fix VPI registration, error clean up and add support for ↵James Smart2009-12-0411-47/+498
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vlink events This patch includes the following fixes and new features: - Fix mask size for CT field in WQE - Fix VPI base not used when unregistering VPI on port 1. - Fix UNREG_VPI mailbox command to unreg the correct VPI - Fixed Check for aborted els command - Fix error when trying to load driver with wrong firmware on FCoE HBA. - Fix bug with probe_one routines not putting the Scsi_Host back upon error - Add support for Clear Virtual Link Async Events - Add support for unsolicited CT exchange sequence abort - Add 0x0714 OCeXXXXX PCI ID Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] lpfc 8.3.5: fix reset path, ELS ordering and discovery issuesJames Smart2009-12-049-220/+242
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch includes the following fixes: - Fixed panic during HBA reset. - Fixed FCoE event tag passed in resume_rpi. - Fix out of order ELS commands - Fixed discovery issues found during VLAN testing. - Fix UNREG_VPI failure on extended link pull - Fixed crash while processing unsolicited FC frames. - Clear retry count in the delayed ELS handler - Fixed discovery failure during quick link bounce. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libiscsi: hook into ramp up/down handlingMike Christie2009-12-041-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is rare to get a queue full with iscsi, because targets seem to just reduce the iscsi cmd window. However, there is at least one iscsi target that will throw a queue full when overloaded. This hooks the iscsi code in to the ramp up/down code, so we can handle it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] iscsi class: modify handling of replacement timeoutMike Christie2009-12-041-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies the replacement/recovery_timeout so it works more like the fc fast io fail tmo. If userspace tries to set the replacement/recovery_timeout to less than zero, we will turn off the forced recovery cleanup. If userspace sets the value to 0 then we will force the recovery cleanup immediately. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit (git 2.34.1) at 2025-02-09 01:41:26 +0000